% arara: pdflatex: { files: [latexindent]} \appendix \section{Required Perl modules}\label{sec:requiredmodules} If you intend to use \texttt{latexindent.pl} and \emph{not} one of the supplied standalone executable files, then you will need a few standard Perl modules -- if you can run the minimum code in \cref{lst:helloworld} (\texttt{perl helloworld.pl}) then you will be able to run \texttt{latexindent.pl}, otherwise you may need to install the missing modules -- see \cref{sec:module-installer,sec:manual-module-instal}. \begin{cmhlistings}[style=tcblatex,language=Perl]{\texttt{helloworld.pl}}{lst:helloworld} #!/usr/bin/perl use strict; # | use warnings; # | use Encode; # | use Getopt::Long; # | use Data::Dumper; # these modules are use List::Util qw(max); # generally part use PerlIO::encoding; # of a default perl distribution use open ':std', ':encoding(UTF-8)';# | use Text::Wrap; # | use Text::Tabs; # | use FindBin; # | use File::Copy; # | use File::Basename; # | use File::HomeDir; # <--- typically requires install via cpanm use YAML::Tiny; # <--- typically requires install via cpanm print "hello world"; exit; \end{cmhlistings} \subsection{Module installer script}\label{sec:module-installer} \announce{2018-01-13}{perl module helper script} \texttt{latexindent.pl} ships with a helper script that will install any missing \texttt{perl} modules on your system; if you run \begin{commandshell} perl latexindent-module-installer.pl \end{commandshell} or \begin{dosprompt} perl latexindent-module-installer.pl \end{dosprompt} then, once you have answered \texttt{Y}, the appropriate modules will be installed onto your distribution. \subsection{Manually installing modules}\label{sec:manual-module-instal} Manually installing the modules given in \cref{lst:helloworld} will vary depending on your operating system and \texttt{Perl} distribution. \subsubsection{Linux} \paragraph{perlbrew} Linux users may be interested in exploring Perlbrew \cite{perlbrew}; an example installation would be: \begin{commandshell} sudo apt-get install perlbrew perlbrew init perlbrew install perl-5.28.1 perlbrew switch perl-5.28.1 sudo apt-get install curl curl -L http://cpanmin.us | perl - App::cpanminus cpanm YAML::Tiny cpanm File::HomeDir \end{commandshell} \index{cpan} \paragraph{Ubuntu/Debian} For other distributions, the Ubuntu/Debian approach may work as follows \begin{commandshell} sudo apt install perl sudo cpan -i App::cpanminus sudo cpanm YAML::Tiny sudo cpanm File::HomeDir \end{commandshell} or else by running, for example, \begin{commandshell} sudo perl -MCPAN -e'install "File::HomeDir"' \end{commandshell} \paragraph{Ubuntu: using the texlive from apt-get} Ubuntu users that install texlive using \texttt{apt-get} as in the following \begin{commandshell} sudo apt install texlive sudo apt install texlive-latex-recommended \end{commandshell} may need the following additional command to work with \texttt{latexindent.pl} \begin{commandshell} sudo apt install texlive-extra-utils \end{commandshell} \paragraph{Arch-based distributions} First install the dependencies \begin{commandshell} sudo pacman -S perl cpanminus \end{commandshell} then run the latexindent-module-installer.pl file located at helper-scripts/ \paragraph{Alpine} If you are using Alpine, some \texttt{Perl} modules are not build-compatible with Alpine, but replacements are available through \texttt{apk}. For example, you might use the commands given in \cref{lst:alpine-install}; thanks to \cite{jun-sheaf} for providing these details. \begin{cmhlistings}[style=tcblatex,language=Bash]{\texttt{alpine-install.sh}}{lst:alpine-install} # Installing perl apk --no-cache add miniperl perl-utils # Installing incompatible latexindent perl dependencies via apk apk --no-cache add \ perl-log-dispatch \ perl-namespace-autoclean \ perl-specio \ perl-unicode-linebreak # Installing remaining latexindent perl dependencies via cpan apk --no-cache add curl wget make ls /usr/share/texmf-dist/scripts/latexindent cd /usr/local/bin && \ curl -L https://cpanmin.us/ -o cpanm && \ chmod +x cpanm cpanm -n App::cpanminus cpanm -n File::HomeDir cpanm -n Params::ValidationCompiler cpanm -n YAML::Tiny \end{cmhlistings} Users of NixOS might like to see \href{https://github.com/cmhughes/latexindent.pl/issues/222}{https://github.com/cmhughes/latexindent.pl/issues/222} for tips. \subsubsection{Mac} Users of the Macintosh operating system might like to explore the following commands, for example: \begin{commandshell} brew install perl brew install cpanm cpanm YAML::Tiny cpanm File::HomeDir \end{commandshell} \subsubsection{Windows} Strawberry Perl users on Windows might use \texttt{CPAN client}. All of the modules are readily available on CPAN \cite{cpan}. \texttt{indent.log} will contain details of the location of the Perl modules on your system. \texttt{latexindent.exe} is a standalone executable for Windows (and therefore does not require a Perl distribution) and caches copies of the Perl modules onto your system; if you wish to see where they are cached, use the \texttt{trace} option, e.g \begin{dosprompt} latexindent.exe -t myfile.tex \end{dosprompt} \subsection{The GCString switch}\label{subsec:the-GCString} If you find that the \texttt{lookForAlignDelims} (as in \cref{subsec:align-at-delimiters}) does not work correctly for your language, then you may with to use the \texttt{Unicode::GCString} module \announce*{2022-03-25}{Unicode::GCString}. \index{perl!Unicode GCString module} \index{switches!--GCString demonstration} This can be loaded by calling \texttt{latexindent.pl} with the \texttt{GCString} switch as in \begin{commandshell} latexindent.pl --GCString myfile.tex \end{commandshell} In this case, you will need to have the \texttt{Unicode::GCString} installed in your \texttt{perl} distribution by using, for example, \begin{commandshell} cpanm YAML::Tiny \end{commandshell} Note: this switch does \emph{nothing} for \texttt{latexindent.exe} which loads the module by default. Users of \texttt{latexindent.exe} should not see any difference in behaviour whether they use this switch or not, as \texttt{latexindent.exe} loads the \texttt{Unicode::GCString} module. \section{Updating the path variable}\label{sec:updating-path} \texttt{latexindent.pl} has a few scripts (available at \cite{latexindent-home}) that can update the \texttt{path} variables. Thank you to \cite{jasjuang} for this feature. If you're on a Linux or Mac machine, then you'll want \texttt{CMakeLists.txt} from \cite{latexindent-home}. \subsection{Add to path for Linux} To add \texttt{latexindent.pl} to the path for Linux, follow these steps: \begin{enumerate} \item download \texttt{latexindent.pl} and its associated modules, \texttt{defaultSettings.yaml}, to your chosen directory from \cite{latexindent-home} ; \item within your directory, create a directory called \texttt{path-helper-files} and download \texttt{CMakeLists.txt} and \lstinline!cmake_uninstall.cmake.in! from \cite{latexindent-home}/path-helper-files to this directory; \item run \begin{commandshell} ls /usr/local/bin \end{commandshell} to see what is \emph{currently} in there; \item run the following commands \begin{commandshell} sudo apt-get update sudo apt-get install --no-install-recommends cmake make # or any other generator mkdir build && cd build cmake ../path-helper-files sudo make install \end{commandshell} \item run \begin{commandshell} ls /usr/local/bin \end{commandshell} again to check that \texttt{latexindent.pl}, its modules and \texttt{defaultSettings.yaml} have been added. \end{enumerate} To \emph{remove} the files, run \begin{commandshell} sudo make uninstall \end{commandshell} \subsection{Add to path for Windows} To add \texttt{latexindent.exe} to the path for Windows, follow these steps: \begin{enumerate} \item download \texttt{latexindent.exe}, \texttt{defaultSettings.yaml}, \texttt{add-to-path.bat} from \cite{latexindent-home} to your chosen directory; \item open a command prompt and run the following command to see what is \emph{currently} in your \lstinline!%path%! variable; \begin{dosprompt} echo %path% \end{dosprompt} \item right click on \texttt{add-to-path.bat} and \emph{Run as administrator}; \item log out, and log back in; \item open a command prompt and run \begin{dosprompt} echo %path% \end{dosprompt} to check that the appropriate directory has been added to your \lstinline!%path%!. \end{enumerate} To \emph{remove} the directory from your \lstinline!%path%!, run \texttt{remove-from-path.bat} as administrator. \section{Batches of files}\label{sec:batches} You can \announce*{2022-03-25}{batches of files details} instruct \texttt{latexindent.pl} to operate on multiple files. For example, the following calls are all valid \begin{commandshell} latexindent.pl myfile1.tex latexindent.pl myfile1.tex myfile2.tex latexindent.pl myfile*.tex \end{commandshell} We note the following features of the script in relation to the switches detailed in \cref{sec:how:to:use}. \subsection{location of indent.log} If the \texttt{-c} switch is \emph{not} active, then \texttt{indent.log} goes to the directory of the final file called. If the \texttt{-c} switch \emph{is} active, then \texttt{indent.log} goes to the specified directory. \subsection{interaction with -w switch} If the \texttt{-w} switch is active, as in \begin{commandshell} latexindent.pl -w myfile*.tex \end{commandshell} then files will be overwritten individually. Back-up files can be re-directed via the \texttt{-c} switch. \subsection{interaction with -o switch} If \texttt{latexindent.pl} is called using the \texttt{-o} switch as in \begin{commandshell} latexindent.pl myfile*.tex -o=my-output-file.tex \end{commandshell} and there are multiple files to operate upon, then the \texttt{-o} switch is ignored because there is only \emph{one} output file specified. More generally, if the \texttt{-o} switch does \emph{not} have a \texttt{+} symbol at the beginning, then the \texttt{-o} switch will be ignored, and is turned it off. For example \begin{commandshell} latexindent.pl myfile*.tex -o=+myfile \end{commandshell} \emph{will} work fine because \emph{each} \texttt{.tex} file will output to \texttt{myfile.tex} Similarly, \begin{commandshell} latexindent.pl myfile*.tex -o=++ \end{commandshell} \emph{will} work because the `existence check/incrementation' routine will be applied. \subsection{interaction with lines switch} This behaves as expected by attempting to operate on the line numbers specified for each file. See the examples in \cref{sec:line-switch}. \subsection{interaction with check switches} The exit codes for \texttt{latexindent.pl} are given in \vref{tab:exit-codes}. When operating on multiple files with the check switch active, as in \begin{commandshell} latexindent.pl myfile*.tex --check \end{commandshell} then \begin{itemize} \item exit code 0 means that the text from \emph{none} of the files has been changed; \item exit code 1 means that the text from \emph{at least one} of the files been file changed. \end{itemize} The interaction with \texttt{checkv} switch is as in the check switch, but with verbose output. \subsection{when a file does not exist} What happens if one of the files can not be operated upon? \begin{itemize} \item if at least one of the files does not exist and \texttt{latexindent.pl} has been called to act upon multiple files, then the exit code is 3; note that \texttt{latexindent.pl} will try to operate on each file that it is called upon, and will not exit with a fatal message in this case; \item if at least one of the files can not be read and \texttt{latexindent.pl} has been called to act upon multiple files, then the exit code is 4; note that \texttt{latexindent.pl} will try to operate on each file that it is called upon, and will not exit with a fatal message in this case; \item if \texttt{latexindent.pl} has been told to operate on multiple files, and some do not exist and some cannot be read, then the exit code will be either 3 or 4, depending upon which it scenario it encountered most recently. \end{itemize} \section{latexindent-yaml-schema.json} \texttt{latexindent.pl} \announce{2022-01-02}{latexindent-yaml-schema.json} ships with \texttt{latexindent-yaml-schema.json} which might help you when constructing your YAML files. \index{json!schema for YAML files} \subsection{VSCode demonstration} To use \texttt{latexindent-yaml-schema.json} with \texttt{VSCode}, you can use the following steps: \index{VSCode} \index{json!VSCode} \begin{enumerate} \item download \texttt{latexindent-yaml-schema.json} from the \texttt{documentation} folder of \cite{latexindent-home}, save it in whichever directory you would like, noting it for reference; \item following the instructions from \cite{vscode-yaml-demo}, for example, you should install the VSCode YAML extension \cite{vscode-yaml-extentions}; \item set up your \texttt{settings.json} file using the directory you saved the file by adapting \cref{lst:settings.json}; on my Ubuntu laptop this file lives at \texttt{/home/cmhughes/.config/Code/User/settings.json}. \end{enumerate} \begin{widepage} \cmhlistingsfromfile{demonstrations/settings.json}[yaml-TCB]{\texttt{settings.json}}{lst:settings.json} \end{widepage} Alternatively, if you would prefer not to download the json file, you might be able to use an adapted version of \cref{lst:settings-alt.json}. \begin{widepage} \cmhlistingsfromfile{demonstrations/settings-alt.json}[yaml-TCB]{\texttt{settings-alt.json}}{lst:settings-alt.json} \end{widepage} Finally, if your TeX distribution is up to date, then \texttt{latexindent-yaml-schema.json} \emph{should} be in the documentation folder of your installation, so an adapted version of \cref{lst:settings-alt1.json} may work. \begin{widepage} \cmhlistingsfromfile{demonstrations/settings-alt1.json}[yaml-TCB]{\texttt{settings-alt1.json}}{lst:settings-alt1.json} \end{widepage} If you have details of how to implement this schema in other editors, please feel encouraged to contribute to this documentation. \section{Using conda}\label{sec:app:conda} If you use conda you'll only need \begin{commandshell} conda install latexindent.pl -c conda-forge \end{commandshell} this will install the executable and all its dependencies (including perl) in the activate environment. You don't even have to worry about \texttt{defaultSettings.yaml} as it included too, you can thus skip \cref{sec:requiredmodules,sec:updating-path}. \index{conda} You can get a conda installation for example from \cite{conda} or from \cite{anacoda}. \subsection{Sample conda installation on Ubuntu} On Ubuntu I followed the 64-bit installation instructions at \cite{condainstallubuntu} and then I ran the following commands: \begin{commandshell} conda create -n latexindent.pl conda activate latexindent.pl conda install latexindent.pl -c conda-forge conda info --envs conda list conda run latexindent.pl -vv \end{commandshell} I found the details given at \cite{condainstallhelp} to be helpful. \section{pre-commit} Users of \texttt{.git} may be interested \announce{2022-01-21}{pre-commit for latexindent.pl} in exploring the \texttt{pre-commit} tool \cite{pre-commithome}, which is supported by \texttt{latexindent.pl}. Thank you to \cite{tdegeusprecommit} for contributing this feature, and to \cite{holzhausprecommit} for their contribution to it. To use the \texttt{pre-commit} tool, you will need to install \texttt{pre-commit}; sample instructions for Ubuntu are given in \cref{sec:pre-commit-ubuntu}. Once installed, there are two ways to use \texttt{pre-commit}: using \texttt{CPAN} or using \texttt{conda}, detailed in \cref{sec:pre-commit-cpan} and \cref{sec:pre-commit-conda} respectively. \subsection{Sample pre-commit installation on Ubuntu}\label{sec:pre-commit-ubuntu} On Ubuntu I ran the following command: \begin{commandshell} python3 -m pip install pre-commit \end{commandshell} I then updated my path via .bashrc so that it includes the line in \cref{lst:bashrc-update}. \begin{cmhlistings}[style=tcblatex,language=Bash]{\texttt{.bashrc} update}{lst:bashrc-update} ... export PATH=$PATH:/home/cmhughes/.local/bin \end{cmhlistings} \subsection{pre-commit defaults} The default values that are employed by \texttt{pre-commit} are shown in \cref{lst:.pre-commit-yaml-default}. \index{pre-commit!default} \cmhlistingsfromfile{../.pre-commit-hooks.yaml}[yaml-TCB]{\texttt{.pre-commit-hooks.yaml} (default)}{lst:.pre-commit-yaml-default} In particular, the decision has deliberately been made (in collaboration with \cite{holzhausprecommit}) to have the default to employ the following switches: \texttt{overwriteIfDifferent}, \texttt{silent}, \texttt{local}; this is detailed in the lines that specify \texttt{args} in \cref{lst:.pre-commit-yaml-default}. \index{pre-commit!warning} \index{warning!pre-commit} \begin{warning} Users of \texttt{pre-commit} will, by default, have the \texttt{overwriteIfDifferent} switch employed. It is assumed that such users have version control in place, and are intending to overwrite their files. \end{warning} \subsection{pre-commit using CPAN}\label{sec:pre-commit-cpan} To use \texttt{latexindent.pl} with \texttt{pre-commit}, create the file \texttt{.pre-commit-config.yaml} given in \cref{lst:.pre-commit-config.yaml-cpan} in your git-repository. \index{cpan} \index{git} \index{pre-commit!cpan} \cmhlistingsfromfile{demonstrations/pre-commit-config-cpan.yaml}[yaml-TCB]{\texttt{.pre-commit-config.yaml} (cpan)}{lst:.pre-commit-config.yaml-cpan} Once created, you should then be able to run the following command: \begin{commandshell} pre-commit run --all-files \end{commandshell} A few notes about \cref{lst:.pre-commit-config.yaml-cpan}: \begin{itemize} \item the settings given in \cref{lst:.pre-commit-config.yaml-cpan} instruct \texttt{pre-commit} to use \texttt{CPAN} to get dependencies; \item this requires \texttt{pre-commit} and \texttt{perl} to be installed on your system; \item the \texttt{args} lists selected command-line options; the settings in \cref{lst:.pre-commit-config.yaml-cpan} are equivalent to calling \begin{commandshell} latexindent.pl -s myfile.tex \end{commandshell} for each \texttt{.tex} file in your repository; \item to instruct \texttt{latexindent.pl} to overwrite the files in your repository, then you can update \cref{lst:.pre-commit-config.yaml-cpan} so that \texttt{args: [-s, -w]}. \end{itemize} Naturally you can add options, or omit \texttt{-s} and \texttt{-w}, according to your preference. \subsection{pre-commit using conda}\label{sec:pre-commit-conda} You can also rely on \texttt{conda} (detailed in \cref{sec:app:conda}) instead of \texttt{CPAN} for all dependencies, including \texttt{latexindent.pl} itself. \index{conda} \index{git} \index{pre-commit!conda} \cmhlistingsfromfile{demonstrations/pre-commit-config-conda.yaml}[yaml-TCB]{\texttt{.pre-commit-config.yaml} (conda)}{lst:.pre-commit-config.yaml-conda} Once created, you should then be able to run the following command: \begin{commandshell} pre-commit run --all-files \end{commandshell} A few notes about \cref{lst:.pre-commit-config.yaml-cpan}: \begin{itemize} \item the settings given in \cref{lst:.pre-commit-config.yaml-conda} instruct \texttt{pre-commit} to use \texttt{conda} to get dependencies; \item this requires \texttt{pre-commit} and \texttt{conda} to be installed on your system; \item the \texttt{args} lists selected command-line options; the settings in \cref{lst:.pre-commit-config.yaml-cpan} are equivalent to calling \begin{commandshell} conda run latexindent.pl -s myfile.tex \end{commandshell} for each \texttt{.tex} file in your repository; \item to instruct \texttt{latexindent.pl} to overwrite the files in your repository, then you can update \cref{lst:.pre-commit-config.yaml-cpan} so that \texttt{args: [-s, -w]}. \end{itemize} \subsection{pre-commit example using -l, -m switches} Let's consider a small example, with local \texttt{latexindent.pl} settings in \texttt{.latexindent.yaml}. \begin{example} We use the local settings given in \cref{lst:.latexindent.yaml}. \begin{cmhlistings}[style=tcblatex]{\texttt{.latexindent.yaml}}{lst:.latexindent.yaml} onlyOneBackUp: 1 modifyLineBreaks: oneSentencePerLine: manipulateSentences: 1 \end{cmhlistings} and \texttt{.pre-commit-config.yaml} as in \cref{lst:.latexindent.yaml-switches}: \cmhlistingsfromfile{demonstrations/pre-commit-config-demo.yaml}[yaml-TCB]{\texttt{.pre-commit-config.yaml} (demo)}{lst:.latexindent.yaml-switches} Now running \begin{commandshell} pre-commit run --all-files \end{commandshell} is equivalent to running \begin{commandshell} latexindent.pl -l -m -s -w myfile.tex \end{commandshell} for each \texttt{.tex} file in your repository. A few notes about \cref{lst:.latexindent.yaml-switches}: \begin{itemize} \item the \texttt{-l} option was added to use the local \texttt{.latexindent.yaml} (where it was specified to only create one back-up file, as \texttt{git} typically takes care of this when you use \texttt{pre-commit}); \item \texttt{-m} to modify line breaks; in addition to \texttt{-s} to suppress command-line output, and \texttt{-w} to format files in place. \end{itemize} \end{example} \section{logFilePreferences}\label{app:logfile-demo} \Vref{lst:logFilePreferences} describes the options for customising the information given to the log file, and we provide a few demonstrations here. Let's say that we start with the code given in \cref{lst:simple}, and the settings specified in \cref{lst:logfile-prefs1-yaml}. \begin{minipage}{.35\linewidth} \cmhlistingsfromfile{demonstrations/simple.tex}{\texttt{simple.tex}}{lst:simple} \end{minipage} \hfill \begin{minipage}{.6\linewidth} \cmhlistingsfromfile{demonstrations/logfile-prefs1.yaml}[yaml-TCB]{\texttt{logfile-prefs1.yaml}}{lst:logfile-prefs1-yaml} \end{minipage} If we run the following command (noting that \texttt{-t} is active) \begin{commandshell} latexindent.pl -t -l=logfile-prefs1.yaml simple.tex \end{commandshell} then on inspection of \texttt{indent.log} we will find the snippet given in \cref{lst:indentlog}. \begin{cmhlistings}[style=tcblatex,morekeywords={TRACE}]{\texttt{indent.log}}{lst:indentlog} +++++ TRACE: environment found: myenv No ancestors found for myenv Storing settings for myenvenvironments indentRulesGlobal specified (0) for environments, ... Using defaultIndent for myenv Putting linebreak after replacementText for myenv looking for COMMANDS and key = {value} TRACE: Searching for commands with optional and/or mandatory arguments AND key = {value} looking for SPECIAL begin/end TRACE: Searching myenv for special begin/end (see specialBeginEnd) TRACE: Searching myenv for optional and mandatory arguments ... no arguments found ----- \end{cmhlistings} Notice that the information given about \texttt{myenv} is `framed' using \texttt{+++++} and \lstinline!-----! respectively. \section{Encoding indentconfig.yaml}\label{app:encoding} In relation to \vref{sec:indentconfig}, Windows users that encounter encoding issues with \texttt{indentconfig.yaml}, may wish to run the following command in either \texttt{cmd.exe} or \texttt{powershell.exe}: \begin{dosprompt} chcp \end{dosprompt} They may receive the following result \begin{dosprompt} Active code page: 936 \end{dosprompt} and can then use the settings given in \cref{lst:indentconfig-encoding1} within their \texttt{indentconfig.yaml}, where 936 is the result of the \texttt{chcp} command. \cmhlistingsfromfile{demonstrations/encoding1.yaml}[yaml-TCB]{\texttt{encoding} demonstration for \texttt{indentconfig.yaml}}{lst:indentconfig-encoding1} \section{dos2unix linebreak adjustment} \yamltitle{dos2unixlinebreaks}*{integer} If you use \texttt{latexindent.pl} on a dos-based Windows file on Linux \announce{2021-06-19}{dos2unix linebreaks} then you may find that trailing horizontal space is not removed as you hope. In such a case, you may wish to try setting \texttt{dos2unixlinebreaks} to 1 and employing, for example, the following command. \begin{commandshell} latexindent.pl -y="dos2unixlinebreaks:1" myfile.tex \end{commandshell} See \cite{bersbersbers} for further dertails. \section{Differences from Version 2.2 to 3.0}\label{app:differences} There are a few (small) changes to the interface when comparing Version 2.2 to Version 3.0. Explicitly, in previous versions you might have run, for example, \index{switches!-o demonstration} \begin{commandshell} latexindent.pl -o myfile.tex outputfile.tex \end{commandshell} whereas in Version 3.0 you would run any of the following, for example, \index{switches!-o demonstration} \begin{commandshell} latexindent.pl -o=outputfile.tex myfile.tex latexindent.pl -o outputfile.tex myfile.tex latexindent.pl myfile.tex -o outputfile.tex latexindent.pl myfile.tex -o=outputfile.tex latexindent.pl myfile.tex -outputfile=outputfile.tex latexindent.pl myfile.tex -outputfile outputfile.tex \end{commandshell} noting that the \emph{output} file is given \emph{next to} the \texttt{-o} switch. The fields given in \cref{lst:obsoleteYaml} are \emph{obsolete} from Version 3.0 onwards. \cmhlistingsfromfile{demonstrations/obsolete.yaml}[yaml-obsolete]{Obsolete YAML fields from Version 3.0}{lst:obsoleteYaml} There is a slight difference when specifying indentation after headings; specifically, we now write \texttt{indentAfterThisHeading} instead of \texttt{indent}. See \cref{lst:indentAfterThisHeadingOld,lst:indentAfterThisHeadingNew} \begin{minipage}{.45\textwidth} \cmhlistingsfromfile{demonstrations/indentAfterThisHeadingOld.yaml}[yaml-TCB]{\texttt{indentAfterThisHeading} in Version 2.2}{lst:indentAfterThisHeadingOld} \end{minipage}% \hfill \begin{minipage}{.45\textwidth} \cmhlistingsfromfile{demonstrations/indentAfterThisHeadingNew.yaml}[yaml-TCB]{\texttt{indentAfterThisHeading} in Version 3.0}{lst:indentAfterThisHeadingNew} \end{minipage}% To specify \texttt{noAdditionalIndent} for display-math environments in Version 2.2, you would write YAML as in \cref{lst:noAdditionalIndentOld}; as of Version 3.0, you would write YAML as in \cref{lst:indentAfterThisHeadingNew1} or, if you're using \texttt{-m} switch, \cref{lst:indentAfterThisHeadingNew2}. \index{specialBeginEnd!update to displaymath V3.0} \begin{minipage}{.45\textwidth} \cmhlistingsfromfile{demonstrations/noAddtionalIndentOld.yaml}[yaml-TCB]{\texttt{noAdditionalIndent} in Version 2.2}{lst:noAdditionalIndentOld} \end{minipage}% \hfill \begin{minipage}{.45\textwidth} \cmhlistingsfromfile{demonstrations/noAddtionalIndentNew.yaml}[yaml-TCB]{\texttt{noAdditionalIndent} for \texttt{displayMath} in Version 3.0}{lst:indentAfterThisHeadingNew1} \cmhlistingsfromfile{demonstrations/noAddtionalIndentNew1.yaml}[yaml-TCB]{\texttt{noAdditionalIndent} for \texttt{displayMath} in Version 3.0}{lst:indentAfterThisHeadingNew2} \end{minipage}% \mbox{}\hfill \begin{minipage}{.25\textwidth} \hrule \hfill\itshape End\\\mbox{}\hfill\mbox{}\rlap{\hfill\includegraphics{logo}} \end{minipage}