\input texinfo @c -*-texinfo -*- @c %**start of header @setfilename epspdf.info @settitle Epspdf and epspdftk User Guide 0.6 @dircategory TeX @direntry * EpsPDF: (epspdf). Portable GUI- and command-line EPS/PS/PDF conversion @end direntry @afourpaper @c %**end of header @c Actually, we do not produce html anymore @ifhtml @alias chapter = unnumbered @alias section = unnumberedsec @alias subsection = unnumberedsubsec @end ifhtml @tex \input pstexi @end tex @iftex @textfonts @rm @raggedbottom @hyphenation{epspdf-tk epspdf} @end iftex @set version 0.6.3 @set homepage http://tex.aanhet.net/epspdf/ @setchapternewpage off @paragraphindent none @copying This manual is for epspdf, version @value{version}. Copyright @copyright{} 2006, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016 Siep Kroonenberg. @quotation Copying and distribution of this file, with or without modification, are permitted in any medium without royalty provided the copyright notice and this notice are preserved. This file is offered as-is, without any warranty. @end quotation @end copying @titlepage @sp 1 @ifnotinfo @center @image{images/logo,,.4in} @end ifnotinfo @sp 2 @center @titlefont {Epspdf and epspdftk User Manual} @sp 1 @center A cross-platform GUI- and command-line converter for [e]ps and pdf @sp 2 @center Siep Kroonenberg (@email{n dot s dot kroonenberg at rug dot nl}) @vskip 0pt plus 1filll @insertcopying @end titlepage @contents @ifnottex @node Top, Usage, (dir), (dir) @top Epspdf and epspdftk @insertcopying @end ifnottex @menu * Usage:: * Command-line usage:: * Notes on PostScript and pdf:: * Bitmapped graphics for @LaTeX{} and pdflatex:: * Troubleshooting:: * Change history:: @detailmenu --- The Detailed Node Listing --- Usage * Overview:: * Viewing:: * Conversion options:: * Converting:: * The configuration screen:: Command-line usage * Option summary:: Notes on PostScript and pdf * Bitmapped and vector:: * Font embedding:: * Eps preview headers:: * Bounding- and other boxes:: * Orientation:: * Exporting PostScript or pdf from Windows programs:: Bitmapped graphics for @LaTeX{} and pdflatex * Linux:: * Mac OS X:: * Windows:: Troubleshooting * No options for output format visible:: * Ghostscript stackunderflow error:: * Part of the graphic gets cut off:: * Fonts look ugly:: * The page has been converted to a bitmap:: * Temporary files are not removed:: * Resources for troubleshooting:: Change history * Version 0.6:: * Version 0.5:: * Version 0.4:: @end detailmenu @end menu @node Usage, Command-line usage, Top, Top @chapter Usage @menu * Overview:: * Viewing:: * Conversion options:: * Converting:: * The configuration screen:: @end menu @node Overview, Viewing, Usage, Usage @section Overview Epspdftk converts files between eps, pdf and general PostScript. The main screen lets you open a file, select some options and convert the file. When opening a file, epspdf tries to find out file type and, in the case of a pdf file, the number of pages. This information is displayed in the box in the upper part of the screen. @ifnotinfo @noindent @image{images/main_w8,,3in} @iftex @hfill @end iftex @image{images/cnv_linux,,3in} @end ifnotinfo @node Viewing, Conversion options, Overview, Usage @section Viewing The View button at the bottom of the screen calls an external viewer. @i{Windows and OS X:} Epspdftk simply tries to use the default Open command. Under Linux the PostScript- and pdf viewers are configurable; see @ref{The configuration screen}. The View button is grayed if epspdf thinks that there is no previewer for the current file. @node Conversion options, Converting, Viewing, Usage @section Conversion options @anchor{gray}@i{Grayscaling:} Grayscaling is now done by Ghostscript itself and should ``just work''. @i{Compute tight boundingbox:} This option is only available if a single page is converted. @i{Page selection:} The only possibilities are selecting a single page or selecting all pages. Converting to eps implies selecting a single page. For general PostScript files, there is no quick way to determine the number of pages, so the program may not check beforehand whether you picked an existing page. If you don't like that, convert the entire document to pdf first -- which will be done behind the scenes anyhow. Specifying options such as grayscaling or page selection may require a multistep conversion. @node Converting, The configuration screen, Conversion options, Usage @section Converting The Convert and save... button calls up a file save dialog. After a successful conversion, the result becomes the new current file, so you can judge the result by pressing the View button again. @node The configuration screen, , Converting, Usage @section The configuration screen @ifnotinfo @image{images/config_lnx,3in} @end ifnotinfo Epspdftk also has a configuration screen. The settings here are preserved between sessions. @subsection Configuring viewers Under Unix, the preferred PostScript- and pdf viewers can be configured in this screen. Epspdf looks for a number of PostScript- and pdf viewers, from which you can select one, but you can also enter one manually. For Windows and Mac OS X, there is no such configuration option. Epspdf will use the program associated with the file type, which can be configured outside epspdf. @subsection Options for converting to pdf Double-check the setting ``Target use'' under ``Conversion to pdf''. ``prepress'' is for pdfs which are going to be printed commercially. The options prepress, printer and default will try to embed all fonts. Often, printshops insist on this. With luck, Ghostscript fonts and system fonts will be used for fonts which were not originally embedded. Note that ``printer'' may not work with some versions of Ghostscript, due to a bug in the handling of color. On the other hand, you may prefer ``screen'' if file size is a concern. See also the Ghostscript documentation, in particular Use.htm and Ps2pdf.htm. Specifying anything other than ``default'' may cause an additional conversion step and possibly also loss of high-level structure. As to pdf versions: this is a trade-off between more features for higher versions and better compatibility for lower versions -- although even version 1.4 is far from bleeding-edge. Converting to a lower version may lead to rasterization of vector data and (much) larger file sizes. For prepress use, the printshop or publisher may require a low version number but otherwise leave this at ``default''. @subsection Options for converting to PostScript For conversion the other way you may opt @i{not} to use pdftops even if it is available. In this case, the conversion will be done by Ghostscript. With older Ghostscript versions, characters may be converted to drawn shapes or little bitmaps, so use pdftops if available. With newer Ghostscript versions, with an eps2write rather than an epswrite output device, Ghostscript does a much better job. Under an older MikTeX without bundled pdftops, this is also the place to point the program to the location of pdftops.exe. @node Command-line usage, Notes on PostScript and pdf, Usage, Top @chapter Command-line usage epspdf.tlu is the backend of epspdftk, but it can also be used standalone. It shares configuration settings with epspdftk.tcl. The first parameter of the epspdftk GUI program is interpreted as startup directory for the file browser. Epspdf itself has a more elaborate command-line interface. Below, we assume that there is a suitable wrapper or symlink for epspdf on your searchpath. This is the case if you installed epspdf as a TeX Live package. Basic usage of epspdf itself: @example epspdf [@var{options}] @var{infile} [@var{outfile}] @end example @menu * Option summary:: @end menu @node Option summary, , Command-line usage, Command-line usage @section Option summary Typing @kbd{epspdf --help} gives you the following summary: @example $ epspdf --help Epspdf version 0.6.3 Copyright (c) 2006, 2008, 2009, 2010, 2011, 2013, 2014, 2015, 2016 Siep Kroonenberg Convert between [e]ps and pdf formats Usage: epspdf[.tlu] [options] infile [outfile] Default for outfile is file.pdf if infile is file.eps or file.ps Default for outfile is file.eps if infile is file.pdf -p, --page, --pagenumber PNUM Page number; must be a positive integer -g, --grey, --gray, -G, --GREY, --GRAY Convert to grayscale -b, --bbox, --BoundingBox Compute tight boundingbox -T, --target TARGET One of screen, ebook, printer, prepress or default -N, --pdfversion VERSION One of 1.2, 1.3, 1.4 or default -U Use pdftops if available -I Reverses the above -s, --save Save some settings to configuration file -i, --info Info: display detected filetype and exit -d Debug: do not remove temp files -v, --version Display version info and exit -h, --help Display this help message and exit @end example @node Notes on PostScript and pdf, Bitmapped graphics for @LaTeX{} and pdflatex, Command-line usage, Top @chapter Notes on PostScript and pdf @menu * Bitmapped and vector:: * Font embedding:: * Eps preview headers:: * Bounding- and other boxes:: * Orientation:: * Exporting PostScript or pdf from Windows programs:: @end menu @node Bitmapped and vector, Font embedding, Notes on PostScript and pdf, Notes on PostScript and pdf @section Bitmapped and vector Pictures can be described either in terms of pixels, or more abstractly, in terms of geometric shapes, fonts and text. Bitmapped or pixel-based graphics are appropriate for photographs and screenshots, but less so for diagrams and spreadsheet-generated graphics. A file in PostScript- or pdf format can contain both types of graphic data. Vector graphics can be freely scaled without losing sharpness or becoming pixellated. If bitmapped graphics are enlarged too much, individual pixels become apparent. With low-resolution bitmaps this happens sooner than with high-resolution bitmaps, but high-resolution bitmaps have (much) larger file sizes, and take longer to process. So avoid converting vector to bitmap. However, converting from bitmap to vector is also best avoided, since it is very hard to do well. Epspdf normally avoids conversion from vector to bitmap and never converts the other way. With the screen- and ebook ``Target use'' option, included bitmaps tend to be downsampled, i.e. reduced to a lower resolution. @node Font embedding, Eps preview headers, Bitmapped and vector, Notes on PostScript and pdf @section Font embedding When converting to pdf, Ghostscript handles font embedding differently depending on the ``Target use'' option. According to the Ghostscript documentation, it embeds all fonts without exception for prepress- and printer settings. Epspdf enforces this also for default settings. For screen- and ebook settings, standard fonts such as Times may be omitted. @node Eps preview headers, Bounding- and other boxes, Font embedding, Notes on PostScript and pdf @section Eps preview headers Preview headers are quietly stripped from eps files. These preview headers are used by e.g. desktop-publishing software to represent eps files on screen without having to interpret the PostScript code itself. Epspdf currently has no option to preserve or add them. @node Bounding- and other boxes, Orientation, Eps preview headers, Notes on PostScript and pdf @section Bounding- and other boxes A PostScript file may have a page size and a boundingbox defined. A pdf file may have a mediabox, a trimbox and various other boxes. Ghostscript by itself normally converts the PostScript page -- which is anchored at (0,0) -- to the pdf mediabox. Conversion from eps to pdf usually translates the bottom-left corner to the (0,0) origin and sets the page to the size of the graphic. Anything outside the boundingbox should be cut off. I have seen Illustrator-generated pdf files with negative coordinates for the lower-left corner. However, this does not seem to cause problems. @node Orientation, Exporting PostScript or pdf from Windows programs, Bounding- and other boxes, Notes on PostScript and pdf @section Orientation There appears to be no reliable way to set orientation for PostScript- and pdf files. This may result part of a graphic being cut off after conversion or even everything falling outside the page / mediabox / boundingbox. @node Exporting PostScript or pdf from Windows programs, , Orientation, Notes on PostScript and pdf @section Exporting PostScript or pdf from Windows programs Microsoft Office 2010 can now export to pdf, either the entire document or a selection. This removes a major headache for Windows users. As a last resort, you can ``print'' to a PostScript file. From some programs, you can print a selection. A suitable driver which comes with Windows is Generic / MS Publisher Color Printer. Pay attention to the printer properties: choose ``Outline'' for font downloading and avoid the ``Optimize for speed'' setting for PostScript Output Option. In my tests, ``Encapsulated PostScript'' did not look very promising either. Try e.g. ``Archive'' instead. These options can be found under the Advanced button. @node Bitmapped graphics for @LaTeX{} and pdflatex, Troubleshooting, Notes on PostScript and pdf, Top @chapter Bitmapped graphics for @LaTeX{} and pdflatex pdflatex can use graphics in .png format (best for screenshots) and .jpg format (best for photographs) directly. However, for @LaTeX{} you are stuck with .eps format. Tips for converting to .eps: @menu * Linux:: * Mac OS X:: * Windows:: @end menu @node Linux, Mac OS X, Bitmapped graphics for @LaTeX{} and pdflatex, Bitmapped graphics for @LaTeX{} and pdflatex @section Linux @table @emph @item sam2p This command-line bitmap-to-PostScript/pdf conversion utility is available from @url{http://code.google.com/p/sam2p/} and may already be packaged for your distribution. It produces very small files: @samp{sam2p image.png image.eps} @item ImageMagick/convert @command{convert} from the ImageMagick package is a command-line utility: @samp{convert image.png image.eps} @item The GIMP This is the premier open source image editing program. It is often pre-installed on Linux, and is also available for other platforms. The GIMP can save in eps- and pdf format. @end table @node Mac OS X, Windows, Linux, Bitmapped graphics for @LaTeX{} and pdflatex @section Mac OS X Mac OS X's built-in Preview application can read most bitmapped formats and save them as pdf or PostScript. In fact, in many cases it is an excellent alternative to epspdf. @node Windows, , Mac OS X, Bitmapped graphics for @LaTeX{} and pdflatex @section Windows I know of no built-in facility for converting bitmaps to eps or pdf. However, many image editors can convert to eps or pdf. A couple of command-line utilities: @example sam2p image.png image.eps @end example or @example bmeps -c image.png image.eps @end example sam2p is distributed with TeX Live (Windows only), bmeps both with TeX Live and with MikTeX. Without the @code{-c} option, bmeps produces a grayscale image. It produces larger files than sam2p. With TeX Live, you can convert to eps by right-clicking an image in Windows Explorer and ``open'' with @emph{bitmap2eps}, which uses sam2p or bmeps in the background. @node Troubleshooting, Change history, Bitmapped graphics for @LaTeX{} and pdflatex, Top @chapter Troubleshooting @menu * No options for output format visible:: * Ghostscript stackunderflow error:: * Part of the graphic gets cut off:: * Fonts look ugly:: * The page has been converted to a bitmap:: * Temporary files are not removed:: * Resources for troubleshooting:: @end menu @node No options for output format visible, Ghostscript stackunderflow error, Troubleshooting, Troubleshooting @section No options for output format visible Widen the window, to make the output format radio buttons visible. @node Ghostscript stackunderflow error, Part of the graphic gets cut off, No options for output format visible, Troubleshooting @section Ghostscript stackunderflow error Some Ghostscript versions, @emph{e.g.} 9.10, have an error in color handling when converting to pdf: selecting ``printer'' as target may lead to an error @code{stackunderflow in .setdistillerparams}. If you run into this, use the ``default'' or ``prepress'' target instead. @node Part of the graphic gets cut off, Fonts look ugly, Ghostscript stackunderflow error, Troubleshooting @section Part of the graphic gets cut off If the PostScript file was generated with the Windows PostScript driver, experiment with the PostScript Output option. Don't choose Optimize for Speed. @node Fonts look ugly, The page has been converted to a bitmap, Part of the graphic gets cut off, Troubleshooting @section Fonts look ugly If Ghostscript has to do the conversion from pdf to ps then text may not remain text, but may be replaced by bitmaps. Newer Ghostscript versions tend to do better in this respect than older ones, but as to preserving fonts, the pdftops utility may still handle more cases. It is part of the xpdf suite and of the Poppler utilities. @node The page has been converted to a bitmap, Temporary files are not removed, Fonts look ugly, Troubleshooting @section The page has been converted to a bitmap This may happen if the page contains features such as transparency which are not supported by intermediate formats. Set pdf target use and target version both to ``default'' to avoid unnecessary conversions: @code{-T default -N default} @node Temporary files are not removed, Resources for troubleshooting, The page has been converted to a bitmap, Troubleshooting @section Temporary files are not removed @itemize @item Command-line: make sure that you did not specify the option @code{-d}. @item Epspdftk GUI: make sure that `Remove temp files' is checked. @item Windows: this platform is notorious for excessive file locking. I already inserted a Windows-specific delay before attempting to delete the temporary files, but this is not always enough. However, you should have no trouble removing temporary files manually. @end itemize @node Resources for troubleshooting, , Temporary files are not removed, Troubleshooting @section Resources for troubleshooting @i{Logfile.} The GUI has a button for viewing log output. This same output is also written to a file @file{epspdf.log}. For Linux/Unix/Mac OS X this is in a subdirectory .epspdf of your home directory; for Windows it is in a subdirectory epspdf of @file{%APPDATA%}. This APPDATA directory may be @file{c:\Users\@var{your user name}\AppData\Roaming} or @file{c:\Documents and Settings\@var{your user name}\Application Data}. Type @example echo %APPDATA% @end example in a Command Prompt window to find out which. The logfile lists all epspdf calls and all Ghostscript- and pdftops calls plus error information. @i{Temporary files.} The temporary files may give clues as well. Uncheck the button ``Remove temp files'', or for the command-line version, give a -d parameter to keep the temporary files. Check the log(file) as to which temporary files have been created. @anchor{Documentation}@i{Ghostscript- and pdftops documentation.} For Ghostscript, the most important files are Ps2pdf.htm and Use.htm. For pdftops, type @kbd{pdftops -h}. For Unix, there is also a man page, and for Windows there is a file pdftops.txt in the distribution zip. @node Change history, , Troubleshooting, Top @chapter Change history @menu * Version 0.6:: * Version 0.5:: * Version 0.4:: @end menu @node Version 0.6, Version 0.5, Change history, Change history @section Version 0.6 The command-line backend component has been rewritten in texlua and therefore no longer needs an external scripting language. Grayscaling is now done by Ghostscript's color options for pdf output. This also works for bitmaps. Croppping of pdfs is now accomplished by running luatex on a suitable wrapper file (same method as Heiko Oberdiek's pdfcrop). Such a conversion preserves advanced features which might otherwise get lost during a PostScript round-trip. I no longer own a Mac, and therefore no longer try to provide an AppleScript wrapper. The current version has no provisions for custom Ghostscript- or pdftops parameters. The corresponding command-line options are accepted but have no effect. @node Version 0.5, Version 0.4, Version 0.6, Change history @section Version 0.5 The GUI has been rewritten in Tcl/Tk, removing the dependence on the Ruby/Tk interface library. The Windows installer now installs a small Ruby subset and the standard epspdf distribution, but with epspdftk.tcl replaced with a starpack: a single executable containing @file{epspdftk.tcl} and a Tcl/Tk runtime. See @url{http://wiki.tcl.tk/52}. Epspdf now uses its own subdirectory for both the logfile and the configuration file. For Linux/Unix/Mac OS X this is @file{$HOME/.epspdf}, for Windows it is @file{%APPDATA%\epspdf}. On all supported platforms, settings are stored in the file @file{config} in this directory. Under Windows, the registry is no longer used for this. A button has been added to view log output. There is a second new button ``Remove temp files'', which is normally checked, causing temporary files to be deleted after each conversion. Unchecking this button may be useful for troubleshooting. In previous versions, temporary files were deleted at the end of the entire epspdftk session but that has become less practical now that the GUI and epspdf itself have become two separate programs. The ``Open with...'' option for Windows has been dropped for technical reasons. The ``--version'' option now prints the version string instead of setting the desired pdf version. The ``--info'' option now also prints the number of pages for pdf files. @node Version 0.4, , Version 0.5, Change history @section Version 0.4 Hi-res boundingboxes are now supported. By default, conversion from eps to pdf now uses the hires boundingbox as ``page'' to determine the page dimensions of the pdf file. Other conversions preserve or generate a hires boundingbox. Under Windows, the new version looks for an installed @TeX{} and will use its private Ghostscript if it cannot find a separately installed Ghostscript. @TeX{} Live's pdftops, being on the searchpath, will be used unless epspdf finds another copy first. There is now a ``-v'' (lowercase) option to print the version string. @ifhtml @section @url{index.html,Main page} @end ifhtml @bye