The probsoln package is designed for teachers or lecturers who want to create problem sheets for their students. This package was designed with mathematics problems in mind, but can be used for other subjects as well. The idea is to create a file containing a large number of problems with their solutions which can be read in by LATEX, and then select a number of problems to typeset. This means that once the database has been set up, each year you can easily create a new problem sheet that is sufficiently different from the previous year, thus preventing the temptation of current students seeking out the previous year’s students, and checking out their answers. There is also an option that can be passed to the package to determine whether or not the solutions should be printed. In this way, one file can either produce the student’s version or the teacher’s version.
The following options may be passed to this package:
As from version 3.02, problems and solutions may contain verbatim text, but you must use the fragile (or fragile=true) option for the associated environments.
Alternatively, if most of your problems contain verbatim, you can globally set this option using:
You can switch off this option using fragile=false.
The fragile option writes information to a temporary file. This defaults to \jobname.vrb but the name may be changed. The extension (.vrb) is given by:
The base name (\jobname) is given by:
In addition to the answers and noanswers package options, it is also possible to show or suppress the solutions using
and
respectively.
The boolean variable showanswers determines whether the answers should be displayed. You can use this value with the ifthen package to specify different text depending on whether the solutions should be displayed. For example:
Alternatively you can use \ifshowanswers…\else…\fi:
For longer passages, you can use the environments
and
For example:
The above will only display the question if showanswers is false and will only display the solution if showanswers is true. If you want the question to appear in the answer sheet as well as the solution, then don’t put the question in the onlyproblem environment:
If you use onlysolution within the defproblem environment, the problem will be tagged as having a solution and will be added to the list used by \foreachsolution. The optional argument of onlysolution (and onlyproblem) is inherited from the parent defproblem setting.
The commands and environments described in this section are provided to assist formatting problems and their solutions.
By default, this is equivalent to
\par\noindent\textbf{\solutionname}: ⟨text⟩
Note that the probsoln package will only define the solution environment if it is not already defined.
The textenum environment is like the enumerate environment but is in-line. It uses the same counter that the enumerate environment would use at that level so the question can be compact but the answer can use enumerate instead. For example:
In this example, the items in the question are brief, so an enumerate environment would result in a lot of unnecessary white space, but the answers require more space, so an enumerate environment is more appropriate. Since the textenum environment uses the same counters as the enumerate environment, the question and answer sheets use consistent labelling. Note that there are other packages available on CTAN that you can use to create in-line lists. Check the TeX Catalogue for further details.
You can use the commands \correctitem and \incorrectitem in place of \item. If the solutions are suppressed, these commands behave in the same way as \item, otherwise they format the item label using one of the commands: \correctitemformat \incorrectitemformat
For example:
The default definition of \correctitemformat puts a frame around the label.
It is possible to construct a problem sheet with solutions using the commands described in the previous sections, however it is also possible to define a set of problems for later use. In this way you can create an external file containing many problems some or all of which can be loaded and used in a document. The probsoln package has a default data set labelled “default” in which you can store problems. Alternatively, you can create multiple data sets. You can then iterate through each problem in a problem set. You can use a previously defined problem more than once, which means that by judicious use of onlyproblem, onlysolution or the showanswers boolean variable in conjunction with \showanswers and \hideanswers, you can print the solutions in a different location to the questions (for example in an appendix).
This defines the problem whose label is given by ⟨label⟩. The label must be unique for a given data set and should not contain active characters or a comma. (Active characters include the special characters such as $ and &, but some packages may make other symbols active, such as the colon (:) character. For example, the ngerman and babel packages make certain punctuation active. Check the relevant package documentation for details.)
If defproblem occurs in the document or is included via \input or \include, then the problem will be added to the default data set. If defproblem occurs in an external file that is loaded using one of the commands defined in §8 Loading Problems From External Files then the problem will be added to the specified data set.
The contents of the defproblem environment should be the text that defines the problem. This may include any of the commands defined in §4 Showing and Hiding Solutions and §5 General Formatting Commands.
The problem may optionally take ⟨n⟩ arguments (where ⟨n⟩ is from 0 to 9). The arguments can be referenced in the definition via #1,…,#9. If ⟨n⟩ is omitted then the problem doesn’t take any arguments. The following example defines a problem with one argument:
The second optional argument ⟨default args⟩ supplies default problem arguments that will automatically be used within \thisproblem when used in \foreachproblem in conjunction with the package option usedefaultargs. (See §9 Iterating Through Datasets.) For example:
This is a shortcut command for:
\begin{defproblem}[⟨n⟩][⟨default args⟩]{⟨label⟩}%
⟨problem⟩%
\begin{onlysolution}%
\begin{solution}%
⟨solution⟩%
\end{solution}%
\end{onlysolution}%
\end{defproblem}
For example:
is equivalent to
(In this example, the argument will need to be a positive number to avoid a double minus in the answer. If you want to perform floating point arithmetic on the arguments, then try the fp or pgfmath packages.)
Alternatively, if you want to supply default arguments to use when iterating through problems with \foreachproblem:
This is a shortcut for:
\begin{defproblem}[⟨n⟩][⟨default args⟩]{⟨label⟩}%
⟨definition⟩%
\end{defproblem}
Once you have defined a problem using defproblem or \newproblem (see §6 Defining a Problem), you can later display the problem using:
where ⟨data set⟩ is the name of the data set that contains the problem (the default data set is used if omitted), ⟨label⟩ is the label identifying the required problem and ⟨arg1⟩, …, ⟨argN⟩ are the arguments to pass to the problem, if the problem was defined to have arguments (where N is the number of arguments specified when the problem was defined).
For example, in the previous section the problem diffcos was defined to have one argument, so it can be used as follows:
This will be equivalent to:
You can store all your problem definitions (see §6 Defining a Problem) in an external file. These problems can all be appended to the default data set by including the file via \input or they can be appended to other data sets using one of the commands described below. Once you have loaded all the required problems, you can iterate through the data sets using the commands described in §9 Iterating Through Datasets. Note that the commands below will create a new data set, if the named data set doesn’t exist.
This will load all problems defined in ⟨filename⟩ and append them to the specified data set, in the order in which they are defined in the file. If ⟨data set⟩ is omitted, the default data set will be used. If ⟨data set⟩ doesn’t exist, it will be created.
This is like \loadallproblems, but only those problems whose label is listed in the comma-separated list ⟨labels⟩ are loaded. For example, if I have some problems defined in the file derivatives.tex, then
will only load the problems whose labels are diffsin and diffcos, respectively. All the other problems in the file will remain undefined.
This is the reverse of \loadselectedproblems. This loads all problems except those whose labels are listed in ⟨exception list⟩.
This randomly loads ⟨n⟩ problems from ⟨filename⟩ and adds them to the given data set. If ⟨data set⟩ is omitted, the default data set is assumed. Note that the problems will be added to the data set in a random order, not in the order in which they were defined. There must be at least ⟨n⟩ problems defined in ⟨filename⟩.
This is similar to \loadrandomproblems except that it won’t load those problems whose labels are listed in ⟨exception list⟩. If you want to automatically exclude problems included in previous documents, see §8.1 Randomly Selecting Problems Not Selected in Previous Documents.
Note that the random number generator has been modified in version 3.01 in order to fix a bug. If you want to ensure that your random numbers are compatible with earlier versions, you can switch to the old generator using
Suppose you have a large set of questions that you want to randomly select for assignments and exams. The chances are, you don’t want to include questions that have been previously set for, say, the last three years. That is, you don’t want to select questions the students may already have seen. As from version 3.03, you can now do this.
The probsoln package defaults to the UK academic year, which starts in September. If this isn’t appropriate, you can change it using:
where ⟨n⟩ is the number of the month. (1 = January, 2 = February, etc.)
The start year is the calender year in effect when the academic year started. For example, if this is the academic year 2011/12, then the start year is 2011. This is automatically set to the start of the current academic year. It is also updated when \SetStartMonth is used.1 If you want to set it to a specific year, you can use:
For example: \SetStartYear{2008} indicates the academic year 2008/9.
There are two files concerned with previously used labels. They are:
This file keeps track of all the labels used in the current document from the previous LATEX run. Note that if you want to delete this file, first clear it using
in place of \ExcludePreviousFile{⟨file⟩}, described below. The argument ⟨file⟩ is the previously used labels file described above. \ClearUsedFile will remove all labels in the current used labels file from the previously used labels file and clear the current used labels file. Once this file is empty, it may then be deleted.
Before loading randomly selected problems, first specify the previously used labels file with the command:
where ⟨file name⟩ is the name of the previously used file. The optional argument ⟨number of years⟩ specifies the year cut-off. This defaults to 3, which means that only those labels used this year or the previous 2 years will be kept. Any problems used before then may be reused.
Suppose I’m lecturing a first year undergraduate mathematics course (designated, say, mth101). I want to set assignments on each topic and an exam at the end of the year (as well as a resit or second sitting paper). I’ve got databases with problems for each topic, but the first and second sitting exams mustn’t include any of the problems used in the assignments or any problems used in assignments or exams for the previous two academic years. I’m going to arrange my directory structure as follows:
Once you have defined all your problems for a given data set, you can use an individual problem with \useproblem (see §7 Using a Problem) but it is more likely that you will want to iterate through all the problems so that you don’t need to remember the labels of all the problems you have defined.
This does ⟨body⟩ for each problem in the given data set. If ⟨data set⟩ is omitted, the default data set is used. Within ⟨body⟩ you can use
to use the current problem and
to access the current label. If the problem requires arguments, and no default arguments were supplied in the problem definition or the package option usedefaultargs was not used, then you will be prompted for arguments, so if you want to use this approach you will need to use LATEX in interactive mode. If you do provide arguments, they will be stored in the event that you need to iterate through the data set again. The arguments will be included in \thisproblem, so you only need to use \thisproblem without having to specify \useproblem.
For example, to iterate through all problems in the default data set:
This is equivalent to \foreachsolution, but only iterates through problems that contain the onlysolution environment. Note that you still need to use \showanswers or the answers package option for the contents of the onlysolution environment to appear.
This does ⟨body⟩ for each of the defined data sets. Within ⟨body⟩, ⟨cmd⟩ will be set to the name of the current data set. For example, to display all problems in all data sets:
Suppose I have two external files called derivatives.tex and probspaces.tex which define problems using both onlyproblem and onlysolution for example:
I can write a document that creates two data sets, one for the derivative problems and one for the problems about probability spaces. I can then use \hideanswers and iterate through the require data set to produce the problems. Later, I can use \showanswers and iterate over all problems defined in both data sets to produce the chapter containing all the answers. When displaying the questions, I have taken advantage of the fact that I can cross-reference items within an enumerate environment, and redefined \theenumi to label the questions according to the chapter. The cross-reference label is constructed from the problem label and is referenced in the answer section to ensure that the answers have the same label as the questions.
This package provides a pseudo-random number generator that is used by \loadrandomproblems. As noted earlier the random number generator has been modified in version 3.01 in order to fix a bug. If you want to ensure that your random numbers are compatible with earlier versions, you can switch to the old generator using
This sets the seed to ⟨n⟩ which must be a non-zero integer. For example, to generate a different set of random numbers every time you LATEX your document,2 put the following in your preamble:
or to generate a different set of random numbers every year you LATEX your document:
This stores the current seed in the count register specified by ⟨register⟩. For example:
Generates a random integer from 1 to ⟨n⟩ and stores in the count register specified by ⟨register⟩. For example, the following generates an integer from 1 to 10 and stores it in the register \myreg:
Generates a random integer from ⟨min⟩ to ⟨max⟩ and stores in the given counter. For example, the following generates a random number between 3 and 8 (inclusive) and stores it in the counter myrand.
Randomly selects ⟨n⟩ values from the comma-separated list given by ⟨list⟩ and iterates through this subset. On each iteration it sets ⟨cmd⟩ to the current value and does ⟨text⟩. For example, the following will load a randomly selected problem from two of the listed files (where file1.tex, file2.tex and file3.tex are files containing at least one problem):
Version 3.0 of the probsoln package completely changed the structure of the package, but the commands described in this section have been provided to maintain compatibility with earlier versions. The only problems that are likely to occur are those where commands are contained within groups. This will effect any commands that are contained in external files that are outside of the arguments to \newproblem and \newproblem*. However, since the external files had to be parsed twice in order to load the problems, this shouldn’t be an issue as adding anything other than problem definitions in those files would be problematic anyway.
The other likely difference is where the random generator is used in a group. This includes commands such as \selectrandomly. For example, if your document contained something like:
Then using versions prior to v3.0 will produce a different set of random numbers since the second \selectrandomly is in a different level of grouping. If you want to ensure that the document produces exactly the same random set with the new version as with the old version, you will need to get and set the random number seed. For example, the above would need to be modified so that it becomes:
This is now equivalent to:
{\loadrandomproblems[⟨filename⟩]{⟨n⟩}{⟨filename⟩}}%
\foreachproblem[⟨filename⟩]{\PSNitem\thisproblem\endPSNitem}
This is now equivalent to:
{\loadallproblems[⟨filename⟩]{⟨filename⟩}}%
\foreachproblem[⟨filename⟩]{\PSNitem\thisproblem\endPSNitem}
Note that in both the above cases, a new data set is created with the same name as the file name.
B
C
\ClearUsedFile 2
\correctitem 3
\correctitemformat 4
D
defproblem (environment) 5, 6, 7, 8, 9, 10, 11, 12
\doforrandN 13
E
enumerate (environment) 14, 15, 16
environments:
defproblem 17, 18, 19, 20, 21, 22, 23, 24
enumerate 25, 26, 27
onlyproblem 28, 29, 30, 31, 32, 33, 34
onlysolution 35, 36, 37, 38, 39, 40, 41
solution 42, 43, 44
textenum 45
\ExcludePreviousFile 46
F
\foreachdataset 47
\foreachproblem 48, 49, 50
\foreachsolution 51, 52
fp package 53
fragile 54
I
\ifshowanswers 58, 59
ifthen package 60
\include 61
\incorrectitem 62
\incorrectitemformat 63
\input 64, 65
\item 66
L
\loadallproblems 67
\loadexceptproblems 68
\loadrandomexcept 69
\loadrandomproblems 70, 71
\loadselectedproblems 72
N
\newproblem 73, 74, 75, 76
\newproblem* 77, 78, 79
ngerman package 80
O
onlyproblem (environment) 81, 82, 83, 84, 85, 86, 87
onlysolution (environment) 88, 89, 90, 91, 92, 93, 94
P
package options:
answers 95, 96, 97
draft 98
final 99
noanswers 100, 101
nousedefaultargs 102
usedefaultargs 103, 104, 105
pgfmath package 106
probsoln package 107, 108, 109
\ProbSolnFragileExt 110
\ProbSolnFragileFile 111
\PSNgetrandseed 112
\PSNrandom 113
\PSNrandseed 114
\PSNuseoldrandom 115, 116
R
\random 117
S
\selectallproblems 118
\selectrandomly 119, 120
\SetStartMonth 121
\SetStartYear 122
\SetUsedFileName 123
\showanswers 124, 125, 126, 127
showanswers boolean variable 128, 129, 130, 131
solution (environment) 132, 133, 134
\solutionname 135
T
textenum (environment) 136
\theenumi 137
\thisproblem 138, 139, 140, 141
\thisproblemlabel 142