\documentclass[11pt]{article}
\usepackage[osf]{mathpazo}
\usepackage[medium,semibold,scale=0.95]{cabin}
\usepackage{fullpage}
\usepackage{prerex}
\newcommand{\myurl}[1]{\textcolor{blue}{\underline{\textcolor{black}{\url{#1}}}}}
%\def\LaTeX{\mbox{LaTeX}}
\begin{document}

\title{\textsf{prerex.sty}: Prerequisite Charts in \LaTeX\\{\large Version 6.6}}
\author{R. D. Tennent\\\texttt{rdt@cs.queensu.ca}}
\date{\today}
\maketitle 
\thispagestyle{empty}

\section{Description}
\texttt{prerex.sty}
defines macros that 
\LaTeX\ processors
can use
to create charts consisting of labelled course boxes linked by arrows
that represent pre- and co-requisite requirements; see
the example chart in Figure~\ref{chart} on page~\pageref{chart}.
If the source file satisfies the constraints
of the
\textsf{prerex(5)}
format, a chart description may be edited using the
\textsf{prerex(1)}
interactive editor (as well as any conventional text editor).

\begin{figure}\small
\setcounter{diagheight}{40}
\begin{chart}\sf
\text 15,40:{\textsf{\textbf{\Large Computer Science}}}
\reqfullcourse 50,35:{1083}{Comput.\,Sci.\\Concepts}{TTh 10:00}
\reqhalfcourse 25,30:{1303}{Discrete\\Structures}{MWF 9:30}
\reqhalfcourse 30,20:{2813}{Computer\\Organiz.\,I}{MWF 8:30}
  \prereq 50,35,30,20:
  \prereq 25,30,30,20:
\reqhalfcourse 45,20:{2023}{Procedural\\Prog.\,Devel.}{MWF 2:30}
  \prereq 50,35,45,20:
\reqhalfcourse 65,20:{2513}{Informat.\\Systems}{TTh 1:00}
  \coreq 50,35,65,20:
\mini 10,16:{1083}
\reqhalfcourse 10,10:{2333}{Computab.\,\&\\Formal\,Lang.}{TTh 11:30}
  \prereq 25,30,10,10:
  \prereq 10,16,10,10:
\reqhalfcourse 45,10:{2013}{Software\\Engineer.\,I}{MWF 11:30}
  \prereq 45,20,45,10:
\halfcourse 55,10:{2685}{\texttt{C++}\\Program.}{no}
  \prereq 45,20,55,10:
\mini 21,6:{2013}
\reqhalfcourse 15,0:{3323}{Data\\Structures}{MWF 10:30}
  \prereq 25,30,15,0:
  \prereq 21,6,15,0:
\reqhalfcourse 25,0:{3813}{Comput.\\Organiz.\,II}{TTh 8:30}
  \prereq 30,20,25,0:
\reqhalfcourse 35,0:{3413}{Operating\\Systems\,I}{MWF 9:30}
  \prereq 30,20,35,0:
  \recomm 45,10,35,0:
\halfcourse 45,0:{3013}{Software\\Engineer.\,II}{MWF 11:30}
  \prereq 45,10,45,0:
\halfcourse 58,0:{3513}{Database\\Mngt.\,Sys.\,I}{MWF 8:30 pm}
  \prereq 65,20,58,0:
  \prereq 45,10,58,0:
\reqhalfcourse 70,0:{3503}{Sys.\,Anal.\\\&\,Design}{TTh 10:00}
  \prereq 65,20,70,0:
\end{chart}

\paragraph{Notes}
\begin{itemize}
\item
A solid arrow \solidarrow\  indicates a required prerequisite, 
a dotted arrow \dottedarrow\ 
indicates a corequisite (to be taken before or concurrently), and a
dashed arrow \dashedarrow\ indicates a recommended prerequisite.
Core courses are in \boldbox\ boxes; 
other courses (i.e.,~options or prerequisites)
are in \lightbox\ boxes.
\item Timetable abbreviations: M, T, W, Th, F$=$Mon, Tue, Wed, Thur, Fri, resp.; no$=$not offered.
\item \dots
\end{itemize}
\caption{A Prerequisite Chart}
\label{chart}
\end{figure}
\section{Terminology}
A prerequisite chart consists of a number of 
\emph{course boxes},
linked by 
\emph{arrows}.
Courses are either
\emph{half}
or
\emph{full},
and may be 
\emph{required} or \emph{optional} (or neither).
Each course box can contain a course
\emph{code}
(upper left corner),
a course 
\emph{title}
(lower half),
and
\emph{timetable}
information
(upper right corner).
An arrow can be either a \emph{prerequisite} (solid),
a \emph{corequisite} (dotted),
or 
\emph{recommended} (dashed).
When a conventional arrow would be inappropriate, it is possible to use
a
\emph{mini} 
course ``box'' (consisting of just a course code) just above a target box.
Lines of text may be placed anywhere on the chart.
\section{Coordinate System}
A conventional two-dimensional
Cartesian coordinate system is used to specify the locations of
diagram elements.
The
origin (where
$x = 0$
and
$y = 0$)
is at the lower-left corner of the diagram.
The diagram height is configurable; the width is determined by
the values of
\verb|\textwidth|
and
an adjustable
\verb|\unit|
length, which defines the absolute value of a coordinate unit.
It is possible to put a coordinate grid with labelled axes
in the background of a chart.
The coordinates of a
\emph{box,}
\emph{mini,}
or
\emph{text}
are those of its centre point.  
An
\emph{arrow} 
is described by the
coordinates of the centre points of its source and target boxes/minis/texts. 



\section{Usage}
The command
\verb|\usepackage{prerex}|
should appear in the document preamble.
This will define a \LaTeX\ environment 
\begin{list}{}{}
\item \verb|\begin{chart}|\quad$\cdots$\quad \verb|\end{chart}|
\end{list}
within which the commands described in the following sub-sections may be used
to produce course boxes, minis, texts, and arrows. 
The order of commands is not significant except
that the commands for the source and target boxes of an arrow should 
precede
the command for the arrow, and the \verb|\grid| command, if present, should precede
other chart commands.

\subsection{Course Boxes}
The commands producing course boxes have the following forms:
\begin{list}{}{}
\item \verb|\halfcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\item \verb|\reqhalfcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\item \verb|\opthalfcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\item \verb|\fullcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\item \verb|\reqfullcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\item \verb|\optfullcourse | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}|
\end{list}
where
$x,y$
are the coordinates of the 
centerpoint 
of the box, relative to the origin
of the coordinate system at the lower-left corner of the diagram.
The 
\emph{code},
\emph{title},
and
\emph{timetable}
arguments are arbitrary (well-bracketed) text, possibly with \LaTeX\ markup.

The following are similar but take an additional argument to specify
the (non-default) background color of the course box:
\begin{list}{}{}
\item \verb|\halfcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\item \verb|\reqhalfcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\item \verb|\opthalfcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\item \verb|\fullcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\item \verb|\reqfullcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\item \verb|\optfullcoursec | $x,y$ \verb|:{| \emph{code} \verb|}{| \emph{title} \verb|}{| \emph{timetable} \verb|}| \verb|{| \emph{color} \verb|}|
\end{list}

\subsection{Mini Course Boxes and Texts}
A mini course ``box'' is produced by a command of the form
\begin{list}{}{}
\item \verb|\mini| $x,y$ \verb|:{| \emph{code} \verb|}|
\end{list}
A paragraph of text is produced by a command of the form
\begin{list}{}{}
\item \verb|\text| $x,y$ \verb|:{| \emph{text} \verb|}|
\end{list}
There are several differences between minis and texts.
The maximum length allowed for a course-code may be less than that
for texts. A sans-serif font and a reduced font size is
used for a course-code.  A course-code
may be hyperlinked but a text is not (except when the coordinate grid is on).


\subsection{Arrows}
Arrows between course boxes (or minis or texts) are produced
by commands of the form
\begin{list}{}{}
\item \verb|\prereq| $ x_0,y_0,x_1,y_1$\verb|:|
\item \verb|\coreq| $ x_0,y_0,x_1,y_1$\verb|:|
\item \verb|\recomm| $ x_0,y_0,x_1,y_1$\verb|:|
\end{list}
These produce, respectively, solid, dotted, and dashed arrows from
the course box (or mini or text) centered at coordinates
$x_0,y_0$
to the entity centered at coordinates
$x_1,y_1$.

Arrows by default have a
non-zero curvature (unless they are very short).  It is possible to override the default curvature 
for a particular arrow by using
the instructions
\begin{list}{}{}
\item \verb|\prereqc| $ x_0,y_0,x_1,y_1;c$\verb|:|
\item \verb|\coreqc| $ x_0,y_0,x_1,y_1;c$\verb|:|
\item \verb|\recommc| $ x_0,y_0,x_1,y_1;c$\verb|:|
\end{list}
where
$c$
is an integer in the range $0$--$100$ specifying the desired curvature; for example, 
$c= 0$
will produce a 
straight 
arrow. To change the default curvature for all arrows, the user program may redefine the
\verb|\DefaultCurvature|
command.
\subsection{Web Links}
\label{WebLinks}
Course boxes and minis may be hyperlinked.
The default URL for course boxes is 
\emph{course-code}\verb|.html|
where
\emph{course-code}
is
the 
\emph{code}
argument
of the course box. The URL scheme may be changed by the user 
by re-defining the 
\verb|\CourseURL|
command; see Section~\ref{Configuration}.
\subsection{Coordinate Grid}
The following command produces a coordinate grid with labelled axes, which is
useful while editing a diagram: 
\begin{list}{}{}
\item \verb|\grid|
\end{list}
This is normally placed before all the other chart commands so that
grid lines are in the background, covered by course boxes, minis, texts, and arrows,
as in Figure~\ref{grid} on page~\pageref{grid}. 

The \verb|\grid| command
also redefines the \verb|CourseURL| command 
so that, in suitable PDF viewers, 
if the mouse cursor is placed over a box, mini, or midpoint of an arrow,
the \emph{coordinates} of the box/mini/text(or the coordinates of the source \emph{and} target
of the arrow) will be displayed 
either in the 
status bar
or in a
``tooltip.'' 
This coordinate display make it easier to edit chart descriptions.
When the grid is on, the mid-point of every arrow is highlighted by 
a ``bullet''.

The 
\texttt{prerex}
package at 
\url{http://mirror.ctan.org/graphics/prerex/}
contains source code for a graphical frontend 
\texttt{vprerex} to the \texttt{prerex} 
editor. It incorporates a minimalistic prerex-enabled PDF viewer
which allows coordinates of course boxes,
arrows, and
background points to be captured in the X selection clipboard (for pasting into a 
command being composed at the 
\texttt{prerex} 
prompt).


\begin{figure}\small
\setcounter{diagheight}{40}
\begin{chart}\sf
\grid
\text 15,40:{\textsf{\textbf{\Large Computer Science}}}
\reqfullcourse 50,35:{1083}{Comput.\,Sci.\\Concepts}{TTh 10:00}
\reqhalfcourse 25,30:{1303}{Discrete\\Structures}{MWF 9:30}
\reqhalfcourse 30,20:{2813}{Computer\\Organiz.\,I}{MWF 8:30}
  \prereq 25,30,30,20:
  \prereq 50,35,30,20:
\reqhalfcourse 45,20:{2023}{Procedural\\Prog.\,Devel.}{MWF 2:30}
  \prereq 50,35,45,20:
\reqhalfcourse 65,20:{2513}{Informat.\\Systems}{TTh 1:00}
  \coreq 50,35,65,20:
\mini 10,16:{1083}
\reqhalfcourse 10,10:{2333}{Computab.\,\&\\Formal\,Lang.}{TTh 11:30}
  \prereq 10,16,10,10:
  \prereq 25,30,10,10:
\reqhalfcourse 45,10:{2013}{Software\\Engineer.\,I}{MWF 11:30}
  \prereq 45,20,45,10:
\halfcourse 55,10:{2685}{\texttt{C++}\\Program.}{no}
  \prereq 45,20,55,10:
\mini 21,6:{2013}
\reqhalfcourse 15,0:{3323}{Data\\Structures}{MWF 10:30}
  \prereq 21,6,15,0:
  \prereq 25,30,15,0:
\reqhalfcourse 25,0:{3813}{Comput.\\Organiz.\,II}{TTh 8:30}
  \prereq 30,20,25,0:
\reqhalfcourse 35,0:{3413}{Operating\\Systems\,I}{MWF 9:30}
  \recomm 45,10,35,0:
  \prereq 30,20,35,0:
\halfcourse 45,0:{3013}{Software\\Engineer.\,II}{MWF 11:30}
  \prereq 45,10,45,0:
\halfcourse 58,0:{3513}{Database\\Mngt.\,Sys.\,I}{MWF 8:30 pm}
  \prereq 45,10,58,0:
  \prereq 65,20,58,0:
\reqhalfcourse 70,0:{3503}{Sys.\,Anal.\\\&\,Design}{TTh 10:00}
  \prereq 65,20,70,0:
\end{chart}
\vspace*{2ex}
\caption{A Prerequisite Chart with a Coordinate Grid}
\label{grid}
\end{figure}
\subsection{Stand-Alone Commands}
The following commands may be used outside a 
\verb|chart|
environment, such as in the explanatory notes for a chart:
\begin{center}
\begin{tabular}{lc}
\verb|\solidarrow| & \solidarrow\\
\verb|\dottedarrow| & \dottedarrow \\
\verb|\dashedarrow| & \dashedarrow \\
\verb|\lightbox|  & \sf\small\lightbox \\
\verb|\boldbox|   & \sf\small\boldbox \\
\verb|\dottedbox|   & \sf\small\dottedbox \\
\end{tabular}
\end{center}

\section{Dependencies}
\sloppypar
This implementation of 
\verb|prerex.sty|
uses 
\verb|pgf|
(version~3.0.0 or later)
with add-on package
\verb|tikz|.
The following additional packages are used:
\verb|multido|,
\verb|relsize|,
\verb|calc|,
\verb|textcomp|,
\verb|xcolor|,
and 
\verb|hyperref|.
\emph{Either} \verb\pdflatex\
\emph{or}
\verb\xelatex\
\emph{or}
\verb\latex\, followed by \verb\dvips\ and, possibly, \verb\ps2pdf\
\emph{or}
\verb\latex\ (with suitable driver options), followed by either \verb\dvipdfmx\
or \verb\dvisvgm\ may be used.  

\pagebreak


\section{Installation}

\begin{enumerate}
  \item install the most recent version of 
\verb\pgf\ from \url{http://sourceforge.net/projects/pgf/}.
  \item  copy \verb|prerex.sty| to \emph{your-texmf-tree}\verb|/tex/latex/misc|
  \item copy \verb|doc/prerex.{tex,pdf}| to \emph{your-texmf-tree}\verb|/doc/latex/misc|
  \item if necessary, refresh the \TeX\ database (e.g., \verb|texhash|)
  \item on a \textsc{Unix}-like system, copy \verb|doc/prerex.5| and \verb|doc/prerex.sty.7| to sub-directories of a \verb|man| directory on your 
    \verb|MANPATH|
\end{enumerate}

\section{Configuration} 
\label{Configuration}
The following are defined by the style file but may be re-defined by the
user:
\begin{list}{}{}
\item \verb|\newcommand{\DefaultCurvature}{20}|
\end{list}
where the argument should be in the range $0$--$100$; $0$ means no curvature.
\begin{list}{}{}
\item \verb|\newcommand{\CourseURL}[3]{./#3.html}|
\end{list}
where the arguments supplied at the call are the $x$ and $y$ coordinates
of the box or mini and the course code.
\begin{list}{}{}
\item \verb|\newcommand{\background}{yellow!15}|
\end{list}
which specifies the default background color of course boxes.
\begin{list}{}{}
\item \verb|\setlength{\unit}{5.7816pt}|
\end{list}
which defines the absolute size of a coordinate unit;
this yields 10 pixels per
coordinate unit if the chart is converted to an image at 125 dpi.
\begin{list}{}{}
\item \verb|\newcommand{\dpi}{125}| 
\item \verb|\newcommand{\PixelsPerUnit}{10}| 
\end{list}
\begin{list}{}{}
\item \verb|\setcounter{diagheight}{75}|
\end{list}
which is the 
$y$-coordinate
of the top of the diagram (reduced to $65$ in landscape mode);
the nominal diagram width is 
\verb|\textwidth|~$\div$~\verb|\unit|~$+ 10$.


The following define the thicknesses of the three kinds of arrows,
and the thickness of bold boxes:
\begin{list}{}{}
\item
\verb|\newcommand{\solidwidth}{0.5pt}|
\item
\verb|\newcommand{\dottedwidth}{0.8pt}|
\item
\verb|\newcommand{\dashedwidth}{0.5pt}|
\item
\verb|\newcommand{\boldwidth}{1.0pt}|
\end{list}

The following command is used to change to a smaller size for course codes,
timetable information, and mini-course codes:
\begin{list}{}{}
\item
\verb|\newcommand{\smallersize}{\relsize{-3}}|
\end{list}

The following command defines the baseline adjustment for the stand-alone arrows and boxes;
this parameter is font-dependent.
\begin{list}{}{}
\item
\verb|\newcommand{\baselineAdj}{-0.5ex}|
\end{list}

\section{Conversion to Scalable Vector Graphic Format}

Scalable Vector Graphics (SVG) is an emerging standard for high-quality graphics. It is supported
by all modern browsers natively, making it ideal for posting charts on the web.  
An SVG image is comparable in quality
to a PDF chart and, when compressed, is comparable in size.  
The \texttt{dvisvgm}\footnote{%
\myurl{http://dvisvgm.sourceforge.net/}; also available from CTAN and in TeXLive.}
program may be used to produce a (compressed) SVG image directly from \verb\latex\ output. 

Another approach is to use \texttt{pdf2svg}\footnote{%
\myurl{http://www.cityinthesky.co.uk/opensource/pdf2svg/}},
a small program that uses \texttt{poppler} and \texttt{cairo} libraries
to convert a PDF page to a scalable vector-graphic image.  
From version 0.2.3, \verb\pdf2svg\  inserts clickable
links into the SVG image and supports a scaling option.

Unfortunately, many web \emph{servers} are not properly configured for \texttt{svgz} content.
If you encounter this problem, check out the link appropriate to your server software below:
\begin{itemize}
\item Apache\footnote{%
\myurl{http://kaioa.com/node/45}}

\item Microsoft Internet Information Services (IIS)\footnote{%
\myurl{http://forums.iis.net/t/1175276.aspx}}

\item thttpd\footnote{%
\myurl{http://opensource.dyc.edu/bugzilla3/show_bug.cgi?id=3}}

\item nginx\footnote{%
\myurl{http://trac.nginx.org/nginx/ticket/372}}

\end{itemize}

\section{Implementation Details}

\subsection{Boxes}

To improve the appearance, boxes are drawn with slightly rounded corners.  The half-course
boxes are assigned a minimum height to give a more uniform appearance to horizontal
rows of such boxes. 
The mini and text boxes have white frames and their
fill colour is white, which is assumed to be the background colour of the chart.
A text box is not normally hyperlinked; however, if the coordinate grid is
on, it is hyperlinked and its chart coordinates are encoded in the URI.  

\subsection{Arrows}
Arrows with a small height and arrows whose
source and target points have equal x or y coordinates are always drawn straight
(using a specialized and simpler macro)  unless an explicit
non-zero curvature argument is provided.

If the coordinate grid is on, a hyperlink with the source and target coordinates is placed
at the mid-point of the arrow.

A wider background white edge is drawn below an arrow to 
improve the appearance
of crossing arrows; the background also
ensures visibility of the
arrow when the coordinate grid is on.

\subsection{Coordinate Grid and Associated Changes}
When the coordinate grid is drawn, the \texttt{CourseURL} command
is re-defined to pass node coordinates in URIs. Also,
two ``anchor'' hyperlinks are inserted at the southwest and northeast corners
of the diagram to allow prerex-enabled
PDF viewers to compute chart coordinates.

\section{License}
\verb|prerex.sty|, \verb|prerex.sty.7|, \verb|README.prerex| and this document may be distributed and/or modified under the
conditions of the \LaTeX\ Project Public License.
\end{document}