%% %% This is file `pageslts-example.tex', %% generated with the docstrip utility. %% %% The original source files were: %% %% pageslts.dtx (with options: `example') %% %% This is a generated file. %% %% Project: pageslts %% Version: 2014/01/19 v1.2c %% %% Copyright (C) 2010 - 2014 by %% H.-Martin M"unch %% Portions of code copyrighted by other people as marked. %% %% IMPORTANT NOTICE: %% On the first page backslash pagenumbering should be called %% (with the appropriate argument out of e.g. %% * roman - Lowercase Roman numerals: i, ii, iii, iv,... %% * Roman - Uppercase Roman numerals: I, II, III, IV,... %% * arabic - Arabic numerals: 1, 2, 3, 4,... %% * alph - Lowercase letters: a, b, c, d,... %% * Alph - Uppercase letters: A, B, C, D,... %% * fnsymbol - Footnote symbols: *, ^^e2^^80^^a0 (ddagger), ^^e2^^80^^a1 (dddagger), %% ^^c2^^a7 (mathsection),... %% ). The command backslash pagenumbering is renewed, but no change %% should be visible to the output text, because only labels are added. %% backslash OrigPagenumbering can be used to get the original meaning %% of backslash pagenumbering, but in that case this package does not %% see the change in the page numbering scheme and will make mistakes. %% The package takes options. %% %% The usual disclaimer applies: %% If it doesn't work right that's your problem. %% (Nevertheless, send an e-mail to the maintainer %% when you find an error in this package.) %% %% This work may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either %% version 1.3c of this license or (at your option) any later %% version. This version of this license is in %% http://www.latex-project.org/lppl/lppl-1-3c.txt %% and the latest version of this license is in %% http://www.latex-project.org/lppl.txt %% and version 1.3c or later is part of all distributions of %% LaTeX version 2005/12/01 or later. %% %% This work has the LPPL maintenance status "maintained". %% %% The Current Maintainer of this work is H.-Martin Muench. %% %% This package first started as a revision of the lastpage %% package of Jeffrey P. Goldberg (jeffrey+news at goldmark dot org), %% but it became obvious that a replacement was needed. %% %% This work consists of the main source file pageslts.dtx %% and the derived files %% pageslts.sty, pageslts.pdf, pageslts.ins, pageslts.drv, %% pageslts-example.tex. %% %% In memoriam Tommy Muench + 2014/01/02. %% \documentclass[british]{article} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \usepackage{lipsum}[2011/04/14]% v1.2 \usepackage[draft]{showkeys}[2007/08/07]% v3.15 %% Use final instead of draft to hide the keys. %% \usepackage{hyperref}[2012/11/06]% v6.83m \hypersetup{% extension=pdf,% plainpages=false,% pdfpagelabels=true,% hyperindex=false,% pdflang={en},% pdftitle={pageslts package example},% pdfauthor={Hans-Martin Muench},% pdfsubject={Example for the pageslts package},% pdfkeywords={LaTeX, pageslts, H.-Martin Muench},% pdfview=Fit,% pdfstartview=Fit,% pdfpagelayout=SinglePage,% bookmarksopen=true% } \usepackage[pagecontinue=true,alphMult=ab,AlphMulti=AB,fnsymbolmult=true,% romanMult=true,RomanMulti=true]{pageslts}[2014/01/19]% v1.2c %% These are the default options. %% \makeatletter \renewcommand{\@evenfoot}% {Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of % \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + % \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + % \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + % \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + % \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + % \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = % \lastpageref{LastPages} pages.% } \renewcommand{\@oddfoot}{\@evenfoot} \def\pagesLTSexampleArabic{3} \def\pagesLTSexamplealph{23} \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}% \makeatother \listfiles \begin{document} \pagenumbering{roman} %% Note the first \pagenumbering immediately behind \begin{document}! %% %%\addtocounter{page}{-2} %% \section*{Example for pageslts} \addcontentsline{toc}{section}{Example for pageslts} \markboth{Example for pageslts}{Example for pageslts} This example demonstrates the most common uses of package\\ \textsf{pageslts}, v1.2c as of 2014/01/19 (HMM).\\ The used options were \texttt{pagecontinue=true}, \texttt{alphMult=ab}, \texttt{AlphMulti=AB}, \linebreak \texttt{fnsymbolmult=true}, \texttt{romanMult=true}, and \texttt{RomanMulti=true} (the default ones).\\ For more details please see the documentation!\\ \label{keys} To hide the \pageref{keys}{\qquad } use option \texttt{final} instead of \texttt{draft} with the \textsf{showkeys} package (or remove the package call from the preamble of this document).\\ \textbf{Hyperlinks or not:} If the \textsf{hyperref} package is loaded, the references are also hyperlinked:\\ \smallskip Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of % \lastpageref{pagesLTS.roman}(\lastpageref{pagesLTS.roman.local}) + % \lastpageref{pagesLTS.Roman}(\lastpageref{pagesLTS.Roman.local}) + % \lastpageref{pagesLTS.arabic}(\lastpageref{pagesLTS.arabic.local}) + % \lastpageref{pagesLTS.fnsymbol}(\lastpageref{pagesLTS.fnsymbol.local}) + % \lastpageref{pagesLTS.alph}(\lastpageref{pagesLTS.alph.local}) + % \lastpageref{pagesLTS.Alph}(\lastpageref{pagesLTS.Alph.local}) = % \lastpageref{LastPages} pages.\\ If the \textsf{hyperref} package is loaded, but the hyperlinks of the references shall be suppressed, \verb|\pageref*{...}| and \verb|\lastpageref*{...}| can be used:\\ Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of % \lastpageref*{pagesLTS.roman}(\lastpageref*{pagesLTS.roman.local}) + % \lastpageref*{pagesLTS.Roman}(\lastpageref*{pagesLTS.Roman.local}) + % \lastpageref*{pagesLTS.arabic}(\lastpageref*{pagesLTS.arabic.local}) + % \lastpageref*{pagesLTS.fnsymbol}(\lastpageref*{pagesLTS.fnsymbol.local}) + % \lastpageref*{pagesLTS.alph}(\lastpageref*{pagesLTS.alph.local}) + % \lastpageref*{pagesLTS.Alph}(\lastpageref*{pagesLTS.Alph.local}) = % \lastpageref*{LastPages} pages.\\ \textbf{Trademarks} appear throughout this example without any trademark symbol; they are the property of their respective trademark owner. There is no intention of infringement; the usage is to the benefit of the trademark owner.\\ \textbf{Tip}: Use \textit{logical page numbers} for the display of the pdf!\\ (In Adobe Reader XI (11.0.6): \underline{E}dit $>$ Prefere\underline{n}ces (Ctrl+k) $>$ Page Display $>$ Page Content and Information $>$ Use logical page \nolinebreak{\underline{n}umbers.)}\\ You want negative page numbers? Not only arabic, but even roman, Roman, alph, Alph or fnsymbol ones? No problem, e.\,g. just give a\\ \verb|\addtocounter{page}{|-\textit{some number}\verb|}| in the source code of this example file (or uncomment the prepared line)! \bigskip Save per page about $200\unit{ml}$ water, $2\unit{g}$ CO$_{2}$ and $2\unit{g}$ wood:\\ Therefore please print only if this is really necessary. \pagebreak \tableofcontents \newpage \pagenumbering{roman} %% in case the page numbering is changed before, %% otherwise pagesLTS.current.local.roman on this page %% would be undefined \section{roman} \noindent (\texttt{roman} page numbering was started before, because the page numbering scheme was needed to start at the first page, of course.)\\ \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ You can get this also in other formats: \roman{CurrentPage}, \Roman{CurrentPage}, \arabic{CurrentPage}, \fnsymbol{CurrentPage}, \alph{CurrentPage}, \Alph{CurrentPage}. \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ You can get also this in other formats, too: \roman{pagesLTS.current.local.roman}, \Roman{pagesLTS.current.local.roman}, \arabic{pagesLTS.current.local.roman}, \fnsymbol{pagesLTS.current.local.roman}, \alph{pagesLTS.current.local.roman}, \Alph{pagesLTS.current.local.roman}, but probably it only makes sense if page numbering scheme and format are the same, e.\,g.\\ \verb|\Roman{pagesLTS.current.local.Roman}|\\ or \verb|\Alph{pagesLTS.current.local.Alph}|. \verb|\arabic{...}| could make sense even if combined with another page numbering scheme. And this is exactly what \verb|\theCurrentPageLocal| does:\\ \nolinebreak{\verb|\def\theCurrentPageLocal{\arabic{pagesLTS.current.local.\pagesLTS@pnc}}|.}\\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ When the option \texttt{pagecontinue=false} is used with the \textsf{pageslts} package, the \verb|\lastpageref{pagesLTS.Roman}| will point to the same page as before, but this will have a lower number.\\ The \verb|\lastpageref{pagesLTS.Roman.local}| will not change, because the number of pages does not change (only the page numbers).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{lastpage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-3] \newpage \pagenumbering{Roman} \section{Roman\label{Roman}} \subsection{Common Roman page numbering} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-4] \newpage \subsection{Last page of first Roman sector} \verb|\lastpageref{pagesLTS.Roman}| does \textbf{not} refer to this page (but there: \lastpageref{pagesLTS.Roman}), because the option \texttt{pagecontinue=true} was chosen. When a reference to this page is wanted,\\ \verb|\lastpageref{pagesLTS.Roman.1}| can be used: \lastpageref{pagesLTS.Roman.1}.\\ \bigskip There are \lastpages{Roman}{1}~pages (\verb|\lastpages{Roman}{1}|) in this first Roman sector.\\ The Roman page numbering scheme is continued later in section~\ref{Roman2})! \newpage \pagenumbering{arabic} \section{arabic} \subsection{Standard page numbering} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pagesLTS} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-4] \newpage \subsection[Empty page style]{Also an empty page style is no problem % for the current or total page count} \bigskip \thispagestyle{empty} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-4] \newpage \subsection[addtocounter, setcounter]{Neither % \texttt{\textbackslash addtocounter\{page\}} nor % \texttt{\textbackslash setcounter\{page\}} is a problem for the % current or total page numbers} (Here is an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| in the source code.)\\ \addtocounter{page}{\pagesLTSexampleArabic} \noindent The page (from \verb|\thepage| command): \thepage \\ \noindent Current page (from \verb|\theCurrentPage|\ % command), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (from \verb|\theCurrentPageLocal|\ % command), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal\\ \noindent Last page's number (LastPages): \lastpageref{LastPages}{\hskip3em } (= total number of pages)\\ \lipsum[1-7] \newpage \pagenumbering{fnsymbol} \section{fnsymbol} Adobe Reader XI (11.0.1) does not show the correct page names for all pages with \texttt{fnsymbol} page numbering scheme: \begin{center} \begin{tabular}{c|c|c|c} page & page & \multicolumn{2}{c|}{shown by the Reader} \\ number & name & without & \multicolumn{1}{c|}{with} \\ & & \multicolumn{2}{c|}{\textsf{alphalph} \&\ \textsf{pageslts}}\\ \hline $-2$ & \texttt{LaTeX Error} & & \ensuremath {-\ }\\ $-1$ & \texttt{LaTeX Error} & & \ensuremath {- *}\\ $0$ & (ignored by \LaTeX) & & 0 \\ $1$ & \ensuremath {*} & * & \ensuremath {*} \\ $2$ & \ensuremath {\dagger } & & \\ $3$ & \ensuremath {\ddagger } & & \\ $4$ & \ensuremath {\mathsection } & & \\ $5$ & \ensuremath {\mathparagraph } & & \\ $6$ & \ensuremath {\delimiter "026B30D } & "026B30D & \ensuremath {**} \\ $7$ & \ensuremath {**} & ** & \\ $8$ & \ensuremath {\dagger \dagger } & & \\ $9$ & \ensuremath {\ddagger \ddagger } & & \\ $10$ & \texttt{LaTeX Error} & & \\ $11$ & \texttt{LaTeX Error} & & \ensuremath {***}\\ $12$ & \texttt{LaTeX Error} & & \\ \end{tabular} \end{center} \noindent and so on, while at least the (\ldots\ of \ldots ) part of the page number is displayed correctly.\\ \bigskip Without option \texttt{fnsymbolmult=true} of the \textsf{pageslts} package (and the help of \textsc{Heiko Oberdiek}'s \textsf{alphalph} package), after page~9 (\textquotedblleft \ensuremath {\ddagger \ddagger }\textquotedblright ) (and also for negative page numbers) there would just appear a \begin{quote} \begin{verbatim} LaTeX Error: Counter too large See the LaTeX manual or LaTeX Companion for explanation. You've lost some text. Try typing to proceed. If that doesn't work, type X to quit. \end{verbatim} \end{quote} Now the page numbers after 5 (\ensuremath {\mathparagraph }) are continued with the doubled \textquotedblleft number\textquotedblright{} of the first, second, third,\ldots\ page (\ensuremath {**}, \ensuremath {\dagger \dagger }, \ensuremath {\ddagger \ddagger }, \ensuremath {\mathsection \mathsection }, \ensuremath {\mathparagraph \mathparagraph }), and after the tenth page the \textquotedblleft number\textquotedblright{} is tripled (\ensuremath {***}, \ensuremath {\dagger \dagger \dagger },\ldots). Page zero is named 0 and negative pages just named like the positive ones with addition of a minus sign~($-$). \bigskip \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-60] \newpage \pagenumbering{Roman} \section{Roman - again!\label{Roman2}} The page number would start with \textquotedblleft I\textquotedblright{} again -- but for the \textsf{pageslts} package (with option \texttt{pagecontinue=true}, or with option just \texttt{pagecontinue}, or even just \nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}). This package remembered the (\arabic{pagesLTS.double.Roman}-1)\footnote{% OK, here you have to compute this value for yourself, but % subtracting one should be manageable for \TeX{}nicians.} pages already done in Roman output, and therefore continues with page \textquotedblleft \thepage \textquotedblright .\\ If you want to start with \textquotedblleft I\textquotedblright{} all over again, you will have two pages with the same name, but nevertheless you can do this by using option \texttt{pagecontinue=false} or a \verb|\setcounter{page}{1}|\ here (not demonstrated in this example file).\\ \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-6] \newpage \verb|\lastpageref{pagesLTS.Roman}| does \textbf{not} refer to this page (but there: \lastpageref{pagesLTS.Roman}), because the option \texttt{pagecontinue=true} was chosen. When a reference to this page is wanted,\\ \verb|\lastpageref{pagesLTS.Roman.2}| can be used: \lastpageref{pagesLTS.Roman.2}.\\ \bigskip There are \lastpages{Roman}{2}~pages (\verb|\lastpages{Roman}{2}|) in this second Roman sector.\\ The Roman page numbering scheme is continued later in section~\ref{Roman3})! \newpage \pagenumbering{alph} \section{alph\label{alph}} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-4] \newpage Without option \texttt{alphMult=ab} of the \textsf{pageslts} (and the help of \textsc{Heiko Oberdiek's} \textsf{alphalph} package), after page \textquotedblleft z\textquotedblright{} there would just appear a \begin{quote} \begin{verbatim} LaTeX Error: Counter too large See the LaTeX manual or LaTeX Companion for explanation. You've lost some text. Try typing to proceed. If that doesn't work, type X to quit. \end{verbatim} \end{quote} Now the page numbers are continued aa, ab, ac,\ldots\ (aa, bb, cc,\ldots\ is also possible, see the \textsf{pageslts} documentation).\\ To demonstrate this, we add a\\ \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}|\\ in the source code here. \addtocounter{page}{\pagesLTSexamplealph} \bigskip \lipsum[1-18] \newpage \pagenumbering{Roman} \section{Roman - third time!\label{Roman3}} The page number would start with \textquotedblleft I\textquotedblright{} again -- but for the \textsf{pageslts} package (with option \texttt{pagecontinue=true}, or with option just \texttt{pagecontinue}, or even just \nolinebreak{with\textbf{out}} option \texttt{pagecontinue=false}). This package remembered the (\arabic{pagesLTS.double.Roman}-1)\footnote{OK, here % you have to compute this value for yourself, but % subtracting one should be managable for \TeX nicians.} pages already done in Roman output, and therefore continues with page \textquotedblleft \thepage \textquotedblright .\\ If you want to start with \textquotedblleft I\textquotedblright{} all over again, you will have (at least) two pages with the same name, but nevertheless you can do this by using option \texttt{pagecontinue=false} instead of \texttt{pagecontinue=true} (not demonstrated here).\\ \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-3] \newpage \lastpageref{pagesLTS.Roman} (\verb|\lastpageref{pagesLTS.Roman}|) \textbf{does} refers to this page, because the option \texttt{pagecontinue=true} was chosen. Also\\ \verb|\lastpageref{pagesLTS.Roman.3}| can be used: \lastpageref{pagesLTS.Roman.3}.\\ \bigskip There are \lastpages{Roman}{3}~pages (\verb|\lastpages{Roman}{3}|) in this third Roman sector.\\ \newpage \pagenumbering{Alph} \section{Alph} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \lipsum[1-3] Without option \texttt{alphMulti=AB} of the \textsf{pageslts} (and the help of \textsc{Heiko Oberdiek's} \textsf{alphalph} package), after page \textquotedblleft Z\textquotedblright{} there would just appear a \begin{quote} \begin{verbatim} LaTeX Error: Counter too large See the LaTeX manual or LaTeX Companion for explanation. You've lost some text. Try typing to proceed. If that doesn't work, type X to quit. \end{verbatim} \end{quote} Now the page numbers are continued AA, AB, AC,\ldots\ (AA, BB, CC,\ldots\ is also possible, see the \textsf{pageslts} documentation).\\ This is not demonstrated here, but see section~\ref{alph}. \newpage \section{The End} \noindent First page (\verb|\lastpageref{pagesLTS.0}|): \lastpageref{pagesLTS.0}\\ \noindent The page (\verb|\thepage|): \thepage \\ \noindent Current page (\verb|\theCurrentPage|), i.\,e. counted continuously from the first page): \theCurrentPage \\ \noindent CurrentPageLocal (\verb|\theCurrentPageLocal|), i.\,e. counted continuously from the first page of the current page numbering scheme): \theCurrentPageLocal \\ \noindent Last roman page (pagesLTS.roman): \lastpageref{pagesLTS.roman}{\hskip4em } (There are \lastpageref{pagesLTS.roman.local} pages with roman numbers.)\\ \noindent Last Roman page (pagesLTS.Roman): \lastpageref{pagesLTS.Roman}{\hskip3em } (There are \lastpageref{pagesLTS.Roman.local}~pages with Roman numbers:\\ \lastpages{Roman}{1}~pages in the first Roman sector (\pageref{Roman}{\hskip3em }-\lastpageref{pagesLTS.Roman.1}{\hskip3em }),\\ \lastpages{Roman}{2}~pages in the second Roman sector (\pageref{Roman2}{\hskip3em }-\lastpageref{pagesLTS.Roman.2}{\hskip3em }), and\\ \lastpages{Roman}{3}~pages in the third Roman sector (\pageref{Roman3}{\hskip3em }-\lastpageref{pagesLTS.Roman.3}{\hskip3em }).\\ \noindent Last arabic page (pagesLTS.arabic): \lastpageref{pagesLTS.arabic}{\hskip5em } (There are only \lastpageref{pagesLTS.arabic.local} pages with arabic numbers, because an \verb|\addtocounter{page}{|\pagesLTSexampleArabic\verb|}| was used.)\\ \noindent Last fnsymbol page (pagesLTS.fnsymbol): \lastpageref{pagesLTS.fnsymbol} \\ (\verb|\lastpageref{pagesLTS.fnsymbol}| -- never \verb|\pageref{pagesLTS.fnsymbol}|!)\\ (There are \lastpageref{pagesLTS.fnsymbol.local} pages with fnsymbol numbers.)\\ \noindent Last alph page (pagesLTS.alph): \lastpageref{pagesLTS.alph}{\hskip4em } (There are only \lastpageref{pagesLTS.alph.local} pages with alph numbers, because an \verb|\addtocounter{page}{|\pagesLTSexamplealph\verb|}| was used.)\\ \noindent Last Alph page (pagesLTS.Alph): \lastpageref{pagesLTS.Alph}{\hskip4em } (There are \lastpageref{pagesLTS.Alph.local} pages with Alph numbers.)\\ \noindent Last page's \textit{name} (LastPage): \lastpageref{LastPage}\\ \noindent Very last page's \textit{name} (VeryLastPage): \lastpageref{VeryLastPage}\\ (\texttt{LastPage} and \texttt{VeryLastPage} are identical, unless a package with output \linebreak \verb|\AtEndDocument| after the \textsf{pageslts} package was added.)\\ \noindent Last page's \textit{number} (LastPages): \lastpageref{LastPages}{\hskip3em } (=~total number of pages)\\ \medskip \noindent Page \thepage\ (\theCurrentPage; local: \theCurrentPageLocal) of % \lastpageref{pagesLTS.roman} (\lastpageref{pagesLTS.roman.local}) + % \lastpageref{pagesLTS.Roman} (\lastpageref{pagesLTS.Roman.local}) + % \lastpageref{pagesLTS.arabic} (\lastpageref{pagesLTS.arabic.local}) + % \lastpageref{pagesLTS.fnsymbol} (\lastpageref{pagesLTS.fnsymbol.local}) + % \lastpageref{pagesLTS.alph} (\lastpageref{pagesLTS.alph.local}) + % \lastpageref{pagesLTS.Alph} (\lastpageref{pagesLTS.Alph.local}) = % \lastpageref{LastPages} pages. \end{document} \endinput %% %% End of file `pageslts-example.tex'.