2018-07-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi Do a CTAN release following the checklist in the
	file CTAN.  Zip file contents from "make dist" looks OK to me.

2018-07-02  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: typos, underfull boxes, mirror wording.

2018-07-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi:  Finished checking entries against
	latex2e-reference.  Removed that item from xx list.
	(CTAN) Added section.

2018-07-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi:Check entries against
	latex2e-reference.  Through "Modes".

2018-07-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi:Check entries against
	latex2e-reference.  Through the \t's.

2018-07-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi:Check entries against
	latex2e-reference.  Through the \m's.

2018-06-30  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Index): Merge General Index and Concept Index.

	* latex2e.texi (\bigskip & \medskip & \smallskip): one
	anchor for each.

2018-06-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi:Try adding anchors that have URL's that
	are easy to figure out.  Add them in a couple of places, notably
	in lists of parameters.
	(Predefined lengths) Delete, moving contents to \mbox & \makebox.

2018-06-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: Put @noindent's following
	@end examples where they are needed in PDF.

2018-06-29  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Command line options) <-interaction>:
	use @var{mode} to avoid overfull box in index. Use - for printed
	output, and no @ftable.
	(common.texi): minimize url.

2018-06-28  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Command line): both - and -- work in TL,
	and, I hope, in MiKTeX.

2018-06-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: Under- and underfull lines in PDF
	are gone.

2018-06-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: Fix over- and underfull lines in PDF.
	Through page 100.

2018-06-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Command line)  Fix synopsis calling syntax.  Added
	examples of putting commands on the command line,
	and of recovering from errors.  This finishes latex-info; I have
	removed it from the todo's.

2018-06-27  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Terminal input/output) Added synopsis, examples.
	(Command line)  Give synopsis calling syntax.  Expanded
	into sections the command options, including a discussion of shell
	escape.  Put in stub for putting commands on the command line,
	and for recovering from errors.

2018-06-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Front/back matter)  Expanded the entries for the
	table of contents, for the index, and for the glossaries.  Added
	many examples, adjusted wording.  Added description of options for
	.isty files.

2018-06-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Special insertions)  Rearranged the lists so that
        the examples come first.  That eases finding things for readers, since
	all examples are in the same place vertically.  Added Unicode for
	HTML where available.

2018-06-20  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\sbox & \savebox)  Combined the two.  Added examples,
	adjusted wording
	(lrbox)  Adjust wording.
	(\usebox)  Adjust wording, add error messages.

2018-06-19  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\strut)  Added.
	(\mbox & \makebox)  Add examples, cross-references, adjust wording.
	(\fbox & \framebox)  Change name, add examples, adjust wording.

2018-06-18  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: let's make "uppercase" and "lowercase" one word?
	Break some long (>=80 chars) lines, though many remain.

2018-06-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Spaces)  Do vertical spacing commands.
	Add subsections for \bigskip & \medskip & \smallskip, and the
	\bigbreak, etc.  Add examples, particularly tricky was \addvspace.

2018-06-16  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Spaces)  Did horizontal spacing commands.
	Add subsections for \hss and for tie, ~.  Change the two subsections
	on \(SPACE) to one, giving \@ its own subsection.  Add examples, adjust
	wording, add error messages.
        (\mbox & \makebox) Combine the two sections into one.  This needs more
	work, including examples and error messages.

2018-06-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Sectioning)  Add subsections for \appendix and for
	\frontmatter & \mainmatter & \backmatter.  List the sectioning
	parameters secnumdepth and tocdepth.  Add Larger book template in
	part as example of frontmatter, appendix, etc.  Also add article
	template.  Adjust wording of some other sections, such as Tables
	of Contents, to fit changes. Add examples.  Adjust wording of main
	Sectioning section.

2018-06-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Sectioning)  Make subsections for \part, \chapter,
	\section, etc.  Add examples.  Adjust wording of main section.

2018-06-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math miscellany)  Move dots to separate subsection
	under Math symbols.  Move \overline, etc. to separate subsection
	after Math accents.  Move \imath and \jmath to Math symbols.
	Change rest to a menu, with synopses and examples, and error
	messages where appropriate.  Adjust wording.

2018-06-07  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\pagestyle)  Add description of mechanism,
	with example.  Modify description of \makeboth, \makeright.
	* graphics/Makefile  Add.  Make the graphics.
	(list.eps) Have it generated by Asymptote, to make it smaller
	and vector.

2018-06-07  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\pagenumbering)  Add gobble, examples, refs to
	page styles and counters.
	(\maketitle)  Improve example to contain all four declarations.

2018-06-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math spacing)  Adjust wording.
	(Page styles)  Add example, adjust wording.

2018-06-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math functions)  Make the @math{...} stuff not
	appear in the HTML.  Add comment about amsmath allowing users to
	create their own.
	(Math accents)  Make the @math{...} stuff not
	appear in the HTML.

2018-06-05  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math formulas)  Adjust wording, including a suggestion
	that new math docs should use the AMS packages.  Add subsection to
	symbols for Caligraphic, \boldmath, and blackboard bold.

2018-06-04  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Modes)  Include all six modes, with the vertical ones.
	Adjust wording.
	(Making paragraphs) Add \par.  Combine \noindent and \indent.
	Add \parindent to \parskip.

2018-06-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Page breaking)  Next in latex-info.  Adjust wording.
	Add examples and a few error messages.
	(\clearpage & \cleardoublepage) Combine the two into one.

2018-06-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Line breaking)  Next in latex-info (split with
	page breaking).  Adjust wording. Add examples and a few error
	messages.  Adjust wording.
	(sloppypar) Add.

2018-06-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Letters)  Next in latex-info.  Adjust wording.
	(\mlabel) Brought text from fr on customization of label
	printing, added example.

2018-05-31  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Lengths)  Next in latex-info is Lengths.
        Adjust entries, adding examples and error messages.
	(Definitions) \newlength adjusted, examples added.  Make
	synopses fit pattern elsewhere, including adding case of
	no square brackets.  Adjust wording of optargdefault in both
	\newcommand and \newenvironment.

2018-05-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (footnote)  Next in latex-info is Footnotes.
	Fold examples together into Footnotes in Tables subsection.  Move
	Parameters subsection material to \footnote.  Adjust wording.

2018-05-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (thebibliography)  Add examples.  Adjust wording.

2018-05-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (picture)  Add examples.  Adjust wording.
	Add menu items, readjust menu order.  Add examples for many
	menu subjects and adjust wording.

2018-05-24  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (verbatim)  Expand on problems putting
	it in argument of macros, add examples.
	(verse)  Adjust wording.

2018-05-23  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi Continue going through latex-info.  Through that
	doc's Environments.  Adjust wording as it arises.
	(minipage, parbox) Expand on options, add examples.

2018-05-19  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi Continue going through latex-info.  Through that
	doc's Cross References, Commands, Page Layout.  Adjust wording
	as it arises, including adding error messages.

2018-05-18  Karl Berry  <karl@freefriends.org>

	* text: "GNU/Linux", @TeX{} Live, MiK@TeX{}, just @samp.

2018-05-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi Going through http://ctan.org/pkg/latex-info
	(CTAN package latex-info), making sure this doc has everything
	the older one has.  So far, Counters done.  Also adjust wording
	as it arises.

2018-05-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\include & \includeonly)  Combine the two.  Include
	discussion of many edge cases, with examples.
	(Splitting the input)  Add typical case example.
	(\endinput)  Added.
	(\input)  Adjust wording to fit changes.

2018-05-04  Vincent Belaïche  <vincent.belaiche@biosency.com>

	* latex2e-fr.texi (Color): Translate node Color from Jim's r609 —
	subnodes need further translation work.

2018-04-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* Makefile (dist)  Add latex2e-es.pdf.
	* latex2e.texi (list)  Add h0 description accidentally omitted.
	(picture)  Add additional synopsis, adjust wording.

2018-03-22  Vincent Belaïche  <vincent.belaiche@biosency.com>

	* latex2e-fr.texi (All document): Use « tapuscrit » instead or as
	an alternartive to « machine à écrire » for tt font family.
	(Top, Color, Graphics): Add Color and Graphics nodes and sub-nodes
	thereof, without translation.
	(description): Translate edits from Jim r609 2018-03-04

	* latex2e.texi (description): @var{}-ify « text of first item »
	and « text of second item »
	(description): « labeled list of items » -> « list of labeled items »
	(Color package options): @code{}-ify « color » in title, as it is
	the package name.
	(Graphics package options, Graphics package configuration):
	@code{}-ify « graphics » in title, as it is the package name.

2018-03-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* -- Prepare upload distribution to CTAN with correct file mtimes.
	* makedist.sh  Delete.  (Better to use Makefile)
	* CTAN Create Notes on uploading a distribution.

2018-03-28  Karl Berry  <karl@freefriends.org>

	* Makefile (dist): rm zip file before remaking it;
	unzip -l rather than -t for more useful info.

2018-03-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Graphics): Couple of typos, small rewordings.
	* makedist.sh  Create.  Bash script for making .zip for
	a distribution for CTAN.

2018-03-04  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Graphics): Create as a new chapter.  Include all
	commands and options from grfguide.pdf.
	* list.txt Create.  ASCII graphic of the list illustration.

2018-03-04  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Color): Create.  Include all commands and
	options from grfguide.pdf.
	* latex2e.css (code) Create file, so in HTML inside of @math{} the
	code elements will be in monotype.
	* Makefile Include CSS file in texi2html line; put in dependence
	to css file in %.html line.

2018-02-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\spacefactor): Create.  Describe the space factor
	along with the command.  Create sub-menu.
	(\(SPACE) and \@) Move to live below \spacefactor.
	(\frenchspacing) Also move to below \spacefactor.
	(\normalsfcodes) Create, below \spacefactor.

2018-02-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (list): Convert legend for picture from caption
	to a table.

2018-02-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\ignorespaces & \ignorespacesafterend): Create.

2018-02-19  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\list),
	(\item),
	(trivlist): minor wording and formatting updates.
	(\AtBeginDocument, \AtEndDocument): @subsection commands needed.
	Various typos etc. throughout.

2018-02-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (list environment): Move list parameters to this
	entry.

2018-01-02  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (thebibliography, Upper and lower case): Align
	on Karl's r598 edits of 2017-10-29.
	(\protect, Text symbols): Typos.

2017-10-29  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: typos, wording.
	* aspell.en.pws: more exceptions.

2017-10-17  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (document header): Uppercase title 1st
	letter. Make PlainTeX a flag, not sure what the best translation
	of this is.
	(@TeX{} engines, Class and package commands): use @value{PlainTeX} flag.
	(Document class options): Add @PkgIndex{geometry}.
	(\newlenth, \newsavebox, \value): Add Jim's edits of r366 2015-06-20.
	(\providecommand): Add Jim's edits of r348 2015-05-29.
	(\newcommand & \renewcommand): Typo.
	(\newenvironment & \renewenvironment): typo.
	(\newsavebox): Use « baquet » rather than « bac » to translate
	« bin ».
	(Special insertions, Non-English characters): Rename node
	« Non-English characters » to « Additional Latin letters ». Add an
	anchor for backward compatibility.

	* latex2e.texi (Document class options): Add @PkgIndex{geometry}.

2017-10-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi: Mark tabbing node translation from French as TODO.
	(thebibliography): Fix description about \refname, as sometimes it
	is also \bibname.

	* latex2e-fr.texi (Environments): Typo in thebibliography entry.
	(tabbing): Typo.
	(thebibliography): Fix description about \refname, as sometimes it
	is also \bibname.

2017-10-06  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi:  Make EnvIndex and PkgIndex macro usable on the
	same line as text.
	(Low-level font commands): Fix table column width. Fix translation from English.
	(tabbing): Mention algorithm2e and listings packages.
	(Upper and lower case): Mention textcase package.

	* latex2e.texi: Make EnvIndex and PkgIndex macro usable on the
	same line as text.
	(tabbing): Some more translation of the French version. Plus mention
	algorithm2e and listings packages.
	(Upper and lower case): Mention textcase package.

2017-10-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (tabbing): Partial translation of tabbing node
	rewrite, and add examples.
	(Upper and lower case): Use @samp{...} rather than ``...''. Add
	closing @}. Solve overfull box in @example.

	* latex2e-fr.texi (Class and package commands, Special insertions)
	(Upper and lower case): Translate Jim's edits from r578 of
	2017-08-06.
	(tabbing): Rewrite this node, and add examples.
	(table): Typo.


2017-10-03  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Class and package commands): Typo.
	(quotation and quote): Typoes.

2017-08-24  Karl Berry  <karl@freefriends.org>

	* latex2e.texi,
	* latex2e-fr.texi (Low-level font commands): remove width percentages.

2017-08-22  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi: push iftexthenelse macro and HAS-MATH flag to common.texi
	(Low-level font commands): Restore cmss & cmtt. `@dmn{}%' -> `%'.

	* latex2e-fr.texi: push iftexthenelse macro and HAS-MATH flag to common.texi
	(Low-level font commands): Restore cmss & cmtt. `@dmn{}%' -> `@dmn{%}'.

	* common.texi: push iftexthenelse macro and HAS-MATH flag to common.texi

2017-08-22  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Low-level font commands): Refer to
	https://ctan.org/pkg/encguide.  Use multitables to achieve Jim's
	goal of having 1st column entry on the same line as 2nd column
	entry, it seems cleaner than itemize + '@t{@ }'. Add comment why
	cmss & cmtt were dropped ?
	(Low-level font commands/\baselinestretch): Some rewording + say
	explicitely that the given example is doubling line skip.

	* latex2e-fr.texi (Layout, Low-level font commands): Translate
	Jim's r363 edits of 2015-06-16, as well as my edits on top of them
	to latex2e.texi made in this revision.

2017-08-09  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* NEWS-fr: Typoes.

	* Makefile.1: Add common.texi to the list of files to be zipped
	into distribution.

2017-08-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (\@startsection) Added defaults for book, article,
	and report classes.

2017-08-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* README-fr: Convert from latin-9 to utf-8 to comply with CTAN
	requirements.

2017-08-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile.1: rename README-fr to README in the zipped archive.

	* NEWS-fr: svn propset keywords to Id for leading timestap to be
	uptodate

	* README-fr: Typoes. Extend the leading English part fo the French
	readme to comply with CTAN requirements.

2017-08-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* README-fr: Port GNA! -> Puszcza. `non officiel' -> `officieux'
	for consistency with manual. Mention other people translate
	`moving argument' by `argument mouvant'.

2017-08-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* NEWS-fr: Add delivery note --- translated from Jim's, thank you
	Jim!

	* Makefile.1 (update-date-en): Make awk version generation script
	for en insensitive to Locale --- due to my migrating from MSYS1 to
	MSYS2.
	(fr,en,es): Robustify output genreric targets for them to concern
	only manual output.
	(tag): Port from GNA! to Puszcza the tag taget.
	(help): document target tag

	* latex2e-fr.{dbk,.dvi,.html,.info,.pdf,.texi,.txt,.xml}: Compilation for August 2017  delivery to CTAN.

2017-08-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Update version & copyright notice for August 2017 delivery to CTAN.

	* latex2e-fr.{dbk,.dvi,.html,.info,.pdf,.texi,.txt,.xml}: Compilation for August 2017  delivery to CTAN.

2017-08-06  Karl Berry  <karl@freefriends.org>

	* README: update for move to puszcza/tug.

2017-08-05  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (Upper and lower case)  Added.

2017-08-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: copyright 2017.

2017-08-01  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Environment, Declaration, \makeatletter and \makeatother)
	(\@@ifstar, \@@startsection): put a sectionning title to node.
	(\@@ifstar): @cindex star-variants with key star-variants.
	(Sectioning): Add anchor to secnumdepth counter for reference from
	\@@startsection node.
	(\@@startsection): Reword the explanation of redefining \section
	as \@@startsection and how \section keeps is standard calling form
	when redefined. heading -> title for consistency. @code{}-ify
	class names, book, report & article. Use anchor to
	secnumdepth. Typoes. rubber -> typically rubber. Solve overfully
	hbox in example by not repeating explanations in examplified LaTeX
	comments, rather make a simple link. style [...] file -> package
	[...] file. redefined [...] sectional units -> redefined [...]
	sectional unit title commands.
	(Class and package commands): Amend Karl's r574 edit of
	2017-07-31, `When a document is processed using that class' ->
	`When a document using that class is processed', as one usually
	specify the class in the document itself, not on the command line,
	although the latter is possible.


	* latex2e-fr.texi (document header): update copyright for
	translation.
	(About this document, Class and package commands): Translate
	Karl's r574 edits of 2017-07-31.
	(Environment, Declaration, \makeatletter and \makeatother)
	(\@@startsection,\@@ifstar): put a sectionning title to node.
	(\@@startsection): Complete translation of Jim's r562 of
	2017-07-26 for this node, w/o moving the node under node
	Sectionning.
	(Sectioning): Add anchor to secnumdepth counter for reference from
	\@@startsection node.

2017-07-31  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Class and package commands): Add \CheckCommand
	and \DeclareRobustCommand as per Jim's r568 2017-07-30 edits + my
	own modifications in latex2e.texi.

	* latex2e.texi (Class and package commands/\CheckCommand): Use &
	define term "long" for long command + improve description.
	(Class and package commands/\DeclareRobustCommand): Improve
	existing description. Add mention to etoolbox macros.

2017-07-31  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile.1: Extend check-dw to handle other languages. Add
	target help.

	* latex2e-fr.texi (document header): update version.
	(About this document): Fix some leftover English/automatic
	translated French. Typo.
	(\pageref): Translate some leftover English.

	* latex2e.texi (document header): update version.


2017-07-31  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile.1: Add targets <lang><format>, like enpdf, frpdf,
	eninfo, etc...

	* latex2e-fr.texi (document header, About this document): Take
	edits from Karl's r333 of 2015-05-12.  and .  Plus all my
	modfifications in latex2e.texi --- like using common.texi for
	project home page and bug report. `http://www.ctan.org/...' ->
	`http://ctan.org/...'.  Reword `non officiel' -> `officieux'.
	(Overview): Take edits from Jim's r412+413 of 2015-08-21.
	(Starting and ending): Typo. rewording `sections' -> `rubriques'.
	(Output files): English quotes `` '' to French quotes
	« ». Concerning .log, add @dfn{fichier journal} (the French for
	``log file''). Typo. Translate leftover English in .lot/.lof/.toc
	cindex.
	(@TeX{} engines): @TeX{} -> @TeX{} de base --- ie Plain-@TeX{}. Typo.
	(@LaTeX{} command syntax): Typo.
	(\makeatletter and \makeatother): Take edits from Jim's r564 of
	2017-07-26.
	(\@@startsection): Preliminary taking into account of Jim's r562
	of 2017-07-26.
	(Class and package commands): Translate leftover English sentance.
	(Floats): Translate leftover English
	title. @PkgIndex{flafter}. Typo. Place URL to F. Mittelback
	article in in round-bracket like in the English version.
	(array): @PkgIndex{amsmath}
	(displaymath): Take edits from Jim's r412 2015-08-21, plus my
	modifications to latex2e.texi.
	(picture): `sections' -> `rubriques'.
	(\oval): English quotes `` '' to French quotes « ».
	(table): Exchange order of \caption and \label in example to align
	on the English version.
	(Units of length): Translate to French leftover English @cindex
	about mu.
	(\parbox): Same change as in latex2e.texi, @dfn{}-ize and
	@cindex-ize `paragraphe mode', so remove @code{} around
	`paragraph'. Typo & some rewording.
	(\today): Translate to French leftover English about datetime package.
	(\addtocontents): @code{}-ify title.
	(\addtocontents): Translate to French this node leftover in
	English.
	(Glossaries): Translate to French leftover English word. Fix translation.
	(Indexes): Typo.

	* common.texi: New file, for flags common to all 3 manuals.

	* latex2e-es.texi: Use common.texi for defining project home page
	and bug report address.

	* latex2e.texi (document header): @include common.texi for URL's
	and other flags that we want to make common between all the translations.
	(document titlepage): take home page URL from common.texi
	(About this document): take home page URL from common.texi, same
	for bug report address. @cindex bug report.
	(Floats): @PkgIndex{flafter}.
	(\@@startsection): @code{}-ify book and report class names.
	(array): @PkgIndex{amsmath}.
	(displaymath): @var{}-ify `math text'. Move upward sentence
	`@LaTeX{} will not break the @var{math text} across lines.' in
	order not to interrupt description about equation
	numbering. @PkgIndex{amsmath}. Suppress verbous sentance `Those
	facilities are the best approach for such output in new
	documents.' and replace by add `significantly more' before
	`extensive displayed equation facilities'. `options' -> `ways' in
	order not to create confusion with package options.
	(\parbox): @dfn{}-ize and @cindex-ize `paragraphe mode', so remove
	@code{} around `paragraph'.
	(\includeonly): Typo.
	(\addcontentsline): extension -> filename extension.

2017-07-31  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (About this document): latex2e frozen, not retired;
	clarify usrguide status.
	(Class and package commands): clarify \NeedsTeXFormat.
	vincent xxx's + other typos.

2017-07-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (\@DeclareRobustCommand): Add.

2017-07-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (\@ifstar): Translate from the French version.
	(\@startsection): Move to Sectioning.

2017-07-27  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile.1 (compare-nodes, compare-nodes-fr, compare-nodes-es):
	new targets to compare node lists between languages. compare-nodes
	is made a synonym of compare-nodes-fr because the Spanish
	translation does not reuse the same node names.

2017-07-26  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (<header comment>): Add reference to
	https://www.latex-project.org/help/books/lc2fr-apb.pdf, as far as
	translation is concerned.
	(Starting and ending): Fix @cindex translation.
	(\@@startsection): Typo.
	(\@@ifstar): Typo.
	(Document classes): Add menu entries `Additional packages' and
	`Class and package construction', as per Jim's r560 edits of 2017-07-21.
	(Document class options): typo.
	(Additional packages): Create new node entry, as per Jim's r560
	edits of 2017-07-21.
	(Class and package commands, Class and package construction): New
	nodes, as per Jim's r560 edits of 2017-07-21.
	(document): Add \AtBeginDocument &
	\AtEndDocument sub node, as per Jim's r397 edits of 2015-08-11.
	(itemize): Typo.

	* latex2e.texi (Class and package construction): Re-word avout
	\makeat's surrounding, because the catcode must be changed outside
	a macro definition, and not within it so that any @-char is
	interpreted as a letter in the definition. Reword `interact' -> `interfere'.
	(Class and package structure): Use an enumerate env for
	enumerating. @dfn{...}-ize name of each part of the class/package file.
	@code{...} -> @file{...} for file names.
	(Class and package commands): Clarify that within
	error/warning/info message, command \space is useful only after a
	command name, as the usual space char can be used otherwise. Fix
	prototype of \DeclareLOption* --- takes no @var{option}.
	(Class and package commands): \IfFileExists, \InputIfFileExists,
	use argument in description. Use @file{...} for file names. Add
	@comment about at-macros for handling release date with more
	refinement.
	(Class and package commands): \ExecuteOptions, push @var{option}
	into @code{...} for @code{\ds@@@var{option}}.
	(Class and package commands): @comment, I do not understand ``that
	you invoked''.
	(Class and package commands): @var{option+s+ list} -> @var{option
	list}.
	(Class and package commands): If your code -> If your _own_ code
	(Class and package commands): Cascaded package loading, clarify
	text about how options get through.
	(Class and package commands): \ProcessOpitons `Execute the code
	+for+ each option' -> `Execute the code _associated with_ each
	option'
	(Class and package commands): @dfn{}-ize `global' and `local'
	options.
	(Class and package commands): Use enumerate env for enumerating.
	(Class and package commands):
	`@code{\ProcessOptions*}@var{\@@options}' ->
	`@code{\ProcessOptions*}', fix this, probably a confusion with
	`ds@...' macros.
	(Class and package commands): \ProvidesClass, \ProvidesPackage,
	give synopsis with and w/o brief additional info.
	(Class and package commands): optional part/portion -> optional
	argument.
	(Class and package commands): Place a version number also in the
	brief additional information, as this is what people usually do.
	(Class and package commands): smcmem -> smcmemo for consistency.
	(Class and package commands): `by using the optional +calls+' ->
	`by using the optional _arguments_'.
	(Class and package commands): \ProvidesFile, relate @var{...}
	arguments and description text.
	(Class and package commands): \RequirePackage, author -> document
	author, to distinguish from class/package authors.

2017-07-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (\makeatletter and \makeatother) Give an example
	replacing the \@startsection one that migrated from there.

2017-07-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: (\@startsection) Translate from French.  Add text
	and examples, including example of inventing new sectioning type.

2017-07-21  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: Typos.

2017-07-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi: added class and package commands from clsguide.pdf.

2017-06-09  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (abstract): typo.
	(\raggedleft): typo.
	(\circle): Make \circle & \circle* two different synopsis rather
	than signalling * as an optional argument by square bracketing it.
	(Spacing in math mode): Typo.
	(\hspace): Make \hspace & \hspace* two different synopsis rather
	than signalling * as an optional argument by square bracketing
	it. Typo.
	(\addvspace): Typo (use masculine gender for espace when vertical,
	feminine seems to be used only for horizontal space).
	(tugboat template): Take Karl's edit of 2016-11-30 + translate to
	French --- well maybe I should add that TUG articles have to be
	written in English, and maybe I should add a template for cahiers
	de GUTember.

2016-11-30  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: assorted typos and rewordings.
	- not "itemization"
        - "paragraph" not "paragraphe"
        - "sign" not "signe"
        - "useful" not "usefull"
        Also, "ctan.org" not "www.ctan.org".

	(tugboat template): update.

2016-11-24  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-es.texi: Place the English license in the @copying
	section, and push the translation to an annex.

	* Makefile.1 (fr, en, es): Change dependancy order so that license
	check happens first.
	(license-check-{fr, en, es}): Make the comparison relative to the
	license as in latex2e.texi, and fix `/std/err' to `/dev/stderr'.
	(distclean clean mostlyclean): Add license.texi to the files to be
	cleaned off.
	(txt_files): Remove license.texi from the list of files
	to zip into the distributed archive.

	* Makefile (txt_files): Remove license.texi from the list of files
	to zip into the distributed archive.

2016-11-23  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* license.texi: dos2unix + svn propset svn:eol-style to LF.

	* latex2e.texi (Cross references): Add word label to concept
	index, and make it an @dfn{...} in the node text. `running the
	document' -> `compiling the document'.
	(\label): `number' -> `reference number'.
	(abstract): Solve some overful hbox in @example...@end example
	blocks.

	* latex2e-fr.texi (document header comment): Refer to
	http://gdt.oqlf.gouv.qc.ca/ as one of the source for French
	vocabulary.
	(Cross references, \label, abstract): Same changes as in
	latex2e.texi.
	(Cross references, \label, \pageref, \ref): Take Jim's rev481
	edits + fix some typoes.
	(\includeonly): Fix typo.

	* Makefile.1: Add check-license-<lang> targets to check that the
	license is same as in license.texi

2016-11-21  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* ltx-help.el (latex-help-file): Make this variable a defcustom
	for selecting the manuel translation.

	* latex2e-fr.texi (copying): Restore license text without @include'sion of
	license.texi, make it delimited by @comment's.
	(dircategory): fix `LaTeX2e-fr' -> `latex2e-fr'
	(throughout document): Use proper unbreakable space before colons.
	(tabular, \newtheorem): typoes.
	(\address): @var{...} instead of @code{...} for the argument  + typoes.
	(\cc): typoes + add example from latex2e.texi
	(\closing): typo.
	(\signature): Typoes, translate @var name.
	(Command line): Typoes.

	* latex2e.texi: Restore license text without @inclusion of
	license.texi, make it delimited by @comment's.
	(\cc): Add `, as in:' before example.

2016-11-19  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* license.texi: Ooops... add this file.

2016-11-19  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.{xml,dvi,html,info,pdf,txt}: Make these files again
	for the license.

	* latex2e-fr.texi: Restore original English license text by
	@inclusion of license.texi, and push translation thereof to an
	annex.

	* latex2e.texi: Make license text @include-ed

	* NEWS-fr: Mention that original English license text is restored,
	and translation thereof pushed to an annex.

	* Makefile.1 (txt_files): Add license.texi file.

	* Makefile (txt_files): Add license.texi file.

2016-11-18  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile.1: Make variable txt_tiles a macro, so that NEWS-fr and
	README-fr be delivered instead of NEWS and README for target
	dist-fr.

	* NEWS-fr: add news for November 2016 CTAN delivery.

2016-11-18  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.{xml,dvi,html,info,pdf,txt}: Make these files.

	* latex2e.texi (\makeatletter and \makeatother): Add reference to
	package macros2e.
	(picture): Add reference to package picture.

	* latex2e-fr.texi (\makeatletter and \makeatother): Add reference
	to package macros2e.
	(picture): Fix typos. Add reference to package picture.
	(\protect): Rephrase `argument mobile' to `argument mouvant'

	* README-fr: Make it clear the motivation for changing `argument
	mobile' into `argument mouvant'.

	* Makefile.1 (spell-$(1)): Take in edit by Karl (rev 546) on Makefile

2016-11-15  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Math miscellany): Use `math' instead of `text' for
	the @var{...} name.

	* latex2e-fr.texi (Math miscellany): Use `math' instead of `texte'
	for the @var{...} name. Use `@ifset HAS-MATH' instead of `@iftex'
	for displaying how the example looks like.
	(\(SPACE) and \@@): `@key{espace}' -> `@key{<espace>}' + fix typo
	missing \ in @code{\ }.

2016-10-31  Karl Berry  <karl@freefriends.org>

	* Makefile (spell): A-Z intended in range.

2016-09-14  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.{dbk,html,info,txt,xml,pdf}: Update French manuals.

2016-09-13  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\@@ifstar): New node.

	* latex2e.texi (\makeatletter and \makeatother): Comment that
	documenting \@ifstar is TODO.

2016-09-13  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\newcommand & \renewcommand, Spaces)
	(\(SPACE) and \@@, \(SPACE) after control sequence): Complete
	taking on Karl's rev497 edits.

2016-09-13  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\discretionary, Footnotes in section headings)
	(\newcommand & \renewcommand, Math miscellany, \(SPACE) and \@@)
	(Text symbols): Align on Karl's rev533 changes.
	(\(SPACE) after control sequence): Rename node --- old name was
	``\(SPACE) after CS'' --- as per Karl's rev497 edits.

2016-09-12  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Document class options): Remove @dmn{...} for
	``inches''.

	* latex2e-fr.texi (Document class options): Remove @dmn{...} for
	``pouces''. Use comma instead of point as decimal symbol. Fix
	left-over non translated word ``by''.
	(Floats): Indicate that ``Here'' means ``Ici'', and fix left-over
	non translated word ``For''.

2016-09-09  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Document class options): @dmn{...}-ize the units
	in the text from Jim's rev383 changes.
	(All over document): Create PkgIndex macro and use it to add packages
	to index.

	* latex2e-fr.texi: Take left over Jim's rev383 changes ---
	including further fix from Karl's rev 533. Move HAS_MATH flag
	definition (as per Karl's rev533 changes).  Fix typo inside
	EnvIndex macro definition. Create PkgIndex macro for adding
	packages to index.
	(All over document): Use PkgIndex macro to add packages to index.
	(Overview): Use term ``paquet'' instead of ``paquetage'' in the
	cindex for ``paquet de macro'', to be in line with the text body.
	(Document class options): As compared with Jim's rev383 changes,
	@dmn{...}-ize the units.
	(Math symbols): Fix typo in \uplus entry.

2016-09-07  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Same changes as in latex2e.texi
	(Document class options): Minor editorial change.
	(\newenvironment & \renewenvironment): Align on Karl's rev538
	change, ie clarify that @var{débutdéf} and @var{findéf} are
	executed within a group. Rename @var{débutdéf} and @var{findéf} to
	@var{défdébut} and @var{déffin}

	* latex2e.texi: new iftexthenelse macro.
	(Footnotes in a table): Minor editorial change to avoid overfull hbox.
	(\alph \Alph \arabic \roman \Roman \fnsymbol): Do not mention
	Unicode for PDF output, and show the LaTeX commands producing the
	symbols.
	(\newenvironment & \renewenvironment): clarify that @var{begdefn}
	and @var{enddefn} are executed within a group. Plus clarify that
	_body_ is also treated within a group. Replace word ``executed''
	by ``processed'' because not only execution but also expansion
	prior to it happens within a group.

2016-09-05  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\newenvironment & \renewenvironment): Add an
	@findex for ``group''.

	* latex2e-fr.texi (\newenvironment & \renewenvironment): Align on
	Karl's 2016-09-03, plus some typo/translation fixes. Add an @findex
	for ``groupe''.

	* README-fr,
	* NEWS-fr: New file, translation of NEWS plus some French specifics.

	* README: Clarify that
	https://mail.gna.org/listinfo/latexrefman-discuss is for archives
	and subsription.

2016-09-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Whole file, suppress any trailing blanks.

2016-09-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Top): Fix translation of sub node menu entry text.
	(Overview): Fix spelling. Fix leftover English. ``paquetage de
	macros'' -> ``paquet de macros'', because here work ``package'' is
	less formal (not using the kernel packaging mechanism).
	(@LaTeX{} command syntax): Translate title.
	(Fonts): in ``Low-level font commands'' menu entry, improve
	translation (notably translat ``shape'' by ``allure'').
	(Font styles): Use French guillemets.
	(Low-level font commands): Fix spelling. ``shape'' -> ``allure''
	(Layout): Fix menu entry Texinfoing.
	(\centering): Fix spelling.
	(\centering): Fix typo.
	(minipage): Fix spelling.
	(Footnotes in a table): Fix typo.
	(Lengths): Provide menu entry text index translation where needed.
	(Spaces): Fix spelling + provide ref text translation where needed.

2016-09-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newenvironment & \renewenvironment): wording,
	examples, xref.
	* aspell.en.pws: additions.

2016-08-31  Karl Berry  <karl@freefriends.org>

	* aspell.en.pws: additions.

	* latex2e.texi (Document class options): add a5paper.
	(\discretionary): English description.

	(Footnotes in section headers): wording, add index entries.

	(\newcommand & \renewcommand): more attempts at clarity;
	simplify examples.

	(Math miscellany): add \mathdollar \mathellipsis \mathparagraph
	\mathsection \mathsterling \mathunderscore \mathunderscore.
	(Text symbols): add \textsection, \textquotesingle.

2016-04-12  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Document class options): Improve wording by
	reusing package variable @var{pkg} in the synopsis description.
	(\newcommand & \renewcommand): Fix typo.
	(\newenvironment & \renewenvironment): Use term `positional
	parameter' in addition of `@code{#@var{n}}'. `argument parameters' ->
	`positional parameters'.
	(Reserved characters): `\backslash' -> `\textbackslash' in the
	@findex in accordance with description.

	* latex2e-fr.texi (Document class options): Align \usepackage
	description on latest latex2e.texi, improve wording by reusing
	package variable @var{paquo} in the synopsis description.
	(\newcommand & \renewcommand): Align description on latest
	latex2e.texi by @code{...}-ifying all the occurrence of
	`\@var{cmd}'. Fix typoes.
	(\newenvironment & \renewenvironment): nargs starting from 0
	rather than from 1. Fix typoes. `argument positionnel' ->
	`paramètre positionnel'.
	(Reserved characters): `\backslash' -> `\textbackslash' in the
	@findex in accordance with description. Fix typoes.

2016-04-12  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (top comment, Top): Make version under quotes to
	avoid incorrect French ``de Avril 2016'' or ``du Avril 2016''
	instead of ``d'Avril 2016''.
	(Document classes): Typoes.

	* latex2e-{es,fr}.texi (top comment): Update dates in copyright
	notice up to 2016.

	* latex2e-fr.texi (top comment): `Copyright' -> `Tous droits
	réservés ©' + add ``Vincent Belaïche'' as translator.

2016-04-11  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-es.texi (top comment, Using BibTeX): Replace CTAN
	central server URLs by mirror URLs, after a comment by Petra
	Rübe-Pugliese.

	* latex2e-fr.texi (top comment, Output files, Using BibTeX):
	Replace CTAN central server URLs by mirror URLs, after a comment
	by Petra Rübe-Pugliese.
	(Output files, Using BibTeX): Typoes.

	* latex2e.texi (top comment, Output files): Replace CTAN central
	server URLs by mirror URLs, after a comment by Petra
	Rübe-Pugliese.

2016-04-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* NEWS: Add NEWS entry for the Apr 2016 release --- assuming
	English will be released also.

	* Makefile.1 (dist-xx, dist): Fix pior check that there aren't any
	uncommited changes before making the zip.

2016-04-07  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.{dbk,html,info,txt,xml,pdf}: Update French manuals
	for distribution 2016-04-08 to CTAN.

2016-04-07  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Updated @set UPDATED.

	* aspell.es.pws: new file.

	* aspell.fr.pws: new file.

	* Makefile.1: new file evolved from Makefile, to be merged
	later-on with Makefile once Karl has more time to review it and
	validate the design. Compared to orignal Makefile the changes are
	as follows, where xx denotes the language, ie is a two letter word
	in {en,fr,es}:

	- make it futureproof w.r.t. to new languages addition.

	- make it safer:
	  - test for uncommitted changes before preparing distribution zip
	  - automate @set UPDATED flag before preparing distribution zip

	- add target dist-xx, to prepare distribution for language xx only, this
	  triggers automatic update of @set UPDATED flag for the corresponding
	  language

	- modify spell and spell-en target so as to support all languages. I had
	  to add custom dicitionnary for fr and es. spell will check all the
	  languages, use spell-en for English only. My aspell seems to be too
	  old to support --mode=texinfo, so I could not test it.

	- modify target dist so that french is added to the zip file. Please
	  note that dist will not trigger automatic update of the @set UPDATED
	  flag, before Makefile cannot know which manual has been updated and
	  which not. This will also make the uncommitted check.

	- add target updated-date-xx to automatically update @set UPDATED flag
	  in the xx manual

	- add target updated-xx to do updated-date-xx + rebuild all outputs for
	  xx

	- add target tag to make a tag, you can use this as follows for default
	  CTAN tag (which is `ctanYYYY-MM-DDTHH:mm:SS', where
	  YYYY-MM-DDTHH:mm:SS is an ISO time stamp):

		make tag

	  or you can do this for make tag `foo' with message `Some message':

		make tag TAG=foo "MESSAGE=Some message"


2016-04-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi: Add EnvIndex macro to make indexing environments
	consistent and throughout the manual. Replace any @findex of an
	environment by a call to this macro.

	* latex2e-fr.texi:  Same as latex2e.texi.
	(filecontents): Typoes.
	(table): Typo (table evironment name mistakenly translated to
	French).
	(\\): Typoes.
	(\enlargethispage): translate cindex entry to French.

	* latex2e-es.texi: Same as latex2e.texi.
	(filecontents): Align to latest text in latex2e{,-fr}.texi.

2016-04-02  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-es.texi: Add @BES and @BESU macro definitions.
	(Símbolos de Texto): Use @BES macro rather than @math for
	\textperiodcentered so that the other-than-PDF is clean. `$' ->
	`\$' for \textdollar.

	* latex2e.texi (Text symbols): Use @BES macro rather than @math
	for \textperiodcentered and \trademark so that the other-than-PDF
	is clean. `$' -> `\$' for \textdollar.
	(\makeatletter and \makeatother): re-indent
	\@startsection example for solving the overfull hbox in the PDF
	output.
	* latex2e-fr.texi (Text symbols): \textquestiondown
	Typo. \textexclamdown `haut en bas' -> `culbuté'. Use @BES macro
	rather than @math for \textperiodcentered and \trademark so that
	the other-than-PDF is clean. `$' -> `\$' for \textdollar. `marque
	de fabrique' -> `marque de commerce' for \texttrademark.
	(\@@startsection): re-indent \@startsection example for solving
	the overfull hbox in the PDF output, and fix some wrong reference.

2016-03-31  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.{dbk,dvi,html,info,pdf,texi,txt,xml}: make fr.

2016-03-29  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Line breaking): Improve translation of
	break/breaking, use `saut/sauter à' rather than `rupture/rompre'.
	(Spaces): Typo.
	(Special insertions): Typo.
	(Text symbols): Fix typo adding `comp' into
	`\textcapitalcompwordmark' and `\textascendercompwordmark', and
	translate this item.
	(Math miscellany): Same change as in latex2e.texi
	(\bigskip \medskip \smallskip): Same change as in latex2e.texi

	* latex2e.texi (Math miscellany): Remove @findex useless as we are in an ftable.
	(\bigskip \medskip \smallskip): Replace @table by @ftable, and
	remove @findex corresponding to @item's
	(Text symbols): Fix typo adding `comp' into
	`\textcapitalcompwordmark' and `\textascendercompwordmark'


2016-03-17  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	Reword descrition of \epsilon and \varepsilon.

	* latex2e.texi (Math symbols): About \epsilon ``Greek-letter'' ->
	``lunate'', plus add some notice that ``Similar to Greek text
	letter''. About \varepsilon ``curly'' or ``rounded small'' ->
	``script small letter''.

	* latex2e-fr.texi (Math symbols): About \varepsilon ``en forme de
	3 retourné'' -> ``minuscule de ronde''.

2016-03-15  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Math symbols): Fix compilation errors.

	* latex2e-fr.texi (Math symbols): Fix compilation errors.

2016-03-14  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi Define flags NotInPlainTeX, NeedsAMSSymb and
	NeedsSTIX, in order to factorize text of `Math symbols' node.
	(Math symbols): Remove that \varnothing is reverse of \emptyset,
	but make it variant. Add items for \revemptyset and varnothing.
	Factorize text with news flags flags NotInPlainTeX, NeedsAMSSymb
	and NeedsSTIX.  \rangle, fix unicode code point.  \smile: add
	`smile' into meaning.

	* latex2e-fr.texi (Math symbols): Progress translation of this
	node and make same changes as for latex2e.texi.

2016-03-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Top): Typoe in `Modes' menu entry.
	(eqnarray): `or' -> `ou'.
	(Math symbols): Progress translation of this node + same changes
	as in latex2e.texi.
	(Modes): Typoes + same changes as in latex2e.texi.
	(\ensuremath): new node.
	(\(SPACE) and \@@): `guillemet anglais' -> `guillemet-apostrophe'.
	(Text symbols): Progess translation of this node + same changes as
	in latex2e.texi.

	* latex2e.texi (Math symbols): Remove description how to make
	\leadsto mode independent, and add a reference to new node
	\ensuremath. Also clarify "Unless said otherwise" for this that
	these commands are only available in math mode as this is not true
	for \ldots.
	(Modes): Point to new node \ensuremath
	(\ensuremath): new node.
	(Text symbols): Add pilcrow character for \P, similar change for \S.

2016-03-06  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Math symbols): Progress translation of this node.

2016-02-29  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\circle): Use term ``disque'', in addition to
	``cercle plein'' (solid circle). @dmn{...}-ify unit.
	(\makebox (picture)): Typo.
	(Math symbols): Progress translation of this node.

2016-02-22  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Text symbols): Fix @code{'}->@code{''} for \textquotedblright
	(Splitting the input): @dfn{...}-ify `root file' and add it to concept index
	(\include): Replace `See next section' -> `See @ref{\includeonly}'.
	(\includeonly): `@var{file}s' -> `@var{file1}, @var{file2}, @dots{}'

	* latex2e-fr.texi (\alph \Alph \arabic \roman \Roman \fnsymbol): `croix-mortuaire' -> `obèle'
	(Math symbols): Progress translation of this node.
	(Text symbols): Start translation of this node.
	(\thinspace): `imbriqué' -> `emboîté', as per Cahier GUTenberg #49 glossary
	(Text symbols): Fix @code{'}->@code{''} for \textquotedblright
	(Splitting the input, \include, \includeonly, \input): Translate these nodes.
	(Splitting the input): @dfn{...}-ify `root file' and add it to concept index
	(\include): Replace `See next section' -> `See @ref{\includeonly}'.
	(\includeonly): `@var{file}s' -> `@var{file1}, @var{file2}, @dots{}'

2016-02-15  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\noindent): `..' -> `...'.

	* latex2e-fr.texi (About this document, @LaTeX{} command syntax)
	(Document class options, Document class options)
	(Page layout parameters, Sectioning, enumerate, \item, \line)
	(\thicklines, \thinlines, \cite, \newtheorem, \newtheorem, \newtheorem)
	(\alph \Alph \arabic \roman \Roman \fnsymbol, \signature): @tie{} -> UTF-8
	unbreakable space.
	(Environment): `..' -> `...' + translation of text in example.
	(\centering): Typo.
	(quotation and quote, \newenvironment & \renewenvironment)
	(\noindent, \signature): `..' -> `...'.
	(Math symbols): Progress translation + @tie{} -> UTF-8 unbreakable
	space.

2016-02-11  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (abstract): @code{...}-ify words `article' &
	`report' when they refer to classes.
	(array): @code{...}-ify words `array' when it refers to
	environment.
	(array): Ellipsis `..' -> `...'.
	(\multicolumn): Add empty blank line after `@end example'.

	* latex2e-fr.texi: Throughout document align on Cahier GUTenberg #49 glossary the following:
	`indentation/indenter' -> `renfoncement/renfoncer', `en mode affichage' -> `en hors-texte'.
	(\@@startsection): `@var{indent}' -> `@var{retrait}', indent(ation) -> retrait or renfoncement.
	(Document class options): Added flegn concerns display mode formula only.
	(Environments): `mise en vedette' -> `en hors texte'
	(abstract): `abtracts' -> `résumé', and update translating this
	node as per Jim's rev 486 of 2015-12-05T13:22:45+01 edit.
	(Environment): Ellipsis `..' -> `...', and add
	`Voir @ref{Environments} pour une liste des environnements.' as
	per Jim's rev 486 of 2015-12-05T13:22:45+01 edit.
	(array): Update translation ad per Jim's edits rev 391 of
	2015-08-02T22:57:00+02 and with fixes from rev 469 by Karl of
	2015-11-01T23:58:36+01, and rev 503 by Karl of
	2016-02-10T00:11:11+01
	(eqnarray): `style d'affichage' -> `hors texte'.
	(itemize, minipage, quotation and quote): `Indentation' -> `Renfoncement'.
	(tabular): Ellipsis `..' -> `...', from rev 469 by Karl of
	2015-11-01T23:58:36+01. Typo.
	(\multicolumn): Update translation as per Jim's edit rev 390 of
	2015-08-02T20:08:26+02
	(\verb): Typo.
	(verse): indent(ation) -> retrait or renfoncement.
	(\\): Ellipsis `..' -> `...', from rev 469 by Karl of
	2015-11-01T23:58:36+01.
	(\footnotetext): Typo.
	(Making paragraphs, \indent, \noindent): indent(ation) -> retrait
	or renfoncement.
	(Letters):  `style d'affichage' -> `hors texte'. indente -> renfonce.


2016-02-09  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (array): the directive is just p{...}, not @p{...}.
	Noted by Vincent.

2016-02-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (lrbox): Use Synopsis instead of in-line
	@code{...}. `cmd' -> `\@var{cmd}'. @ref{...}-ify @code{\sbox}.
	(\raisebox): @var{...}-ify some synopsis arguments.
	(\addcontentsline): Remove args from @findex entry. Use synopis
	rather than in-line @code{...}. Specify @var{unit} to be `figure',
	resp. `table', when @var{ext} is `lof', resp. `lot'. Use `text'
	everywhere instead of `text', `entry' and `name'. Fix `\contentsline'
	description. Add third argument `num' to  `\contentsline' and describe it.
	(Indexes): Clarify `extension' is a filename extension. Add
	missing antislash to \printindex and \indexspace.
	(Letters): Typo. @code{...}-ify word `letter' when the environment
	name. Add word `body' concerning whatever lies in the letter
	environment body.
	(\closing): @var{...}-ify argument.

	* latex2e-fr.texi: In file header, add reference to the
	French/English LaTeX glossary published in the ``Cahier
	GUTenberg'' #49 (2017), page 19--45.
	(Top): Typo.
	(itemize): Typo.
	(\discretionary): Typo.
	(\vfill): Translate this node.
	(\vspace): Take fixes from rev 469 by Karl (2015-11-01T23:58:36+01).
	(\opening): Take fixes from rev 469 by Karl (2015-11-01T23:58:36+01).
	(lrbox): Translate this node.
	(\raisebox): Complete translation of this node.
	(Front/back matter): Typo.
	(Tables of contents): `article' -> `entrée', as per Cahier GUTenberg #49 glossary.
	(\addcontentsline): Translate this node, with same edits as in latex2e.texi.
	(\addtocontents): Translate this node.
	(Glossaries): Translate this node.
	(Indexes): Translate this node, with same edits as in latex2e.texi.
	(Letters): Typoes. `clôture' -> `salutation'. Typo. Complete
	translation with same edits as in latex2e.texi.
	(\address): Translate this node.
	(\cc): Translate this node.
	(\closing): Translate this node with same edits as in latex2e.texi.
	(\encl): Translate this node.
	(\location): Translate this node.
	(\makelabels): Typo.
	(\opening): Typo.

2016-02-05  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (Line breaking, \discretionary): Add node
	\discreionary, need completion.
	(\protect): `they must be' -> `one solution is', as there are
	alternative solution consisting in robustification of fragile
	command. Move concept index entry "moving arguments" next to
	concept first occurrence. Fix typo.

	* latex2e-fr.texi (Line breaking, \discretionary): Add \discretionary node
	(\linebreak & \nolinebreak): Translate this node.
	(Page breaking): Translate this node.
	(\protect): Translate this node, with same changes as in latex2e.texi.

2016-02-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Spacing in math mode):  Add @xref{\thinspace} to
	the \thinspace entry.
	(Math miscellany): Complete translation of this node. Clarify
	discretionary multiplication and add example. Make TeX output only
	when compilation is with TeX and fix some of the examples.
	(\(SPACE) and \@@): Typo.
	(\thinspace): Translate this node.
	(Boxes): Translate intro in this node.

	* latex2e.texi (Spacing in math mode): Add @xref{\thinspace} to
	the \thinspace entry.
	(Math miscellany): Clarify discretionary multiplication and add
	example. Make TeX output only when compilation is with TeX and fix
	some of the examples.

2016-02-02  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Reword copyright notice from
	Automatic-translation French to real French.
	(Environments): Remove spurious space.
	(tabular): Typo.
	(\hyphenation): Translate this node.
	(\newenvironment & \renewenvironment): Typo. Align on change done by Jim
	on rev 482 2015-11-30T12:06:12.
	(\newcommand & \renewcommand): Align on changes done by Jim on rev
	345 2015-05-27T02:05:34+02. Also `@var{cmd}' or `@var{\cmd}' ->
	`@cmd{\@var{cmd}}'.
	(Math miscellany): Start translation of this node.
	(Spaces): Typo in menu.
	(\(SPACE) after CS): Typo. Translate remain pieces left over in
	English, notably title. Align on rev 497 2016-02-01 by Karl (ie
	make only a brief mention of xspace), plus my rewording in
	latex2e.texi.

	* latex2e.texi (\newcommand & \renewcommand): `@var{cmd}' or
	`@var{\cmd}' -> `@cmd{\@var{cmd}}'
	(\typein): `@var{cmd}' -> `@cmd{\@var{cmd}}'. Add `starred form' to concept index.
	(\(SPACE) after control sequence): Rewording mention that xspace
	alter standard behaviour. I gather the the intention was not to
	say that individual commands alter the standard behaviour --- as
	xspace package does --- but rather that some individual command do
	not following the standard behaviour, and amongst them, those
	defined with the xspace package.

2016-02-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\(SPACE) after control sequence): replace xspace
	details with a mere mention.  Rename node from
	\(SPACE) after control sequence.
	(\newcommand & \renewcommand): don't say "command".

2016-01-30  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newcommand & \renewcommand): mention "\ "
	after control sequences, as noted by Vincent.

2016-01-27  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Marginal notes): Typoes.
	(Subscripts & superscripts): Typo.
	(Math functions): Translate this node to French.
	(Math accents): Translate this node to French.
	(Math miscellany): Initiate translation  of this node to French.
	(Non-English characters): Translate this node to French.
	(\today): Translate this node to French.

	* latex2e.texi (Math functions): make `\sup' formatted as a math
	operator when in TeX output, update comment accordingly.
	(Additional Latin letters): Add information that \dh, \DH, \dj,
	\DJ, \th and \TH do not exist in OT1 font encoding --- I got this
	infomation from the comprehensive package.
	(Additional Latin letters): \ng & \NG, `Latin' -> `Lappish'.
	(\today): @samp-ify the example date.
	(\today): Add information about localization by multilingual
	packages & classes.

2016-01-26  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Additional Latin letters): rename from
	Non-English characters (leave anchor behind).  Suggestion from
	Vincent, 25 Jan 2016 17:27:30.

2016-01-24  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\item): oops, should have been a subsection.
	(throughout): use three dots consistently for displayed ellipses;
	will fix in-text ellipses later.

2016-01-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Environment[s], \item): fix undefined references.
	(cross-reference): replace with "cross reference", for consistency.

2016-01-22  Karl Berry  <karl@freefriends.org>

	* aspell.en.pws: add more exceptions.
	* latex2e.texi: fix typos, refilling.

2016-01-15  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\setlength, \addtolength, \settodepth)
	(\settoheight, \settowidth): Place synopsis in a Synopsis
	paragraph, rather than in title, simplify title, use \@var{len}
	for the length command (rather than \gnat). Add ``length command''
	to concept index of \selength node with @dfn-fying it, and remove
	quote in the other nodes.
	(Predefined lengths): Make the formula defining \totalheight a
	math formula.

	* latex2e-fr.texi (Floats): Typo
	(\setlength, \addtolength, \settodepth, \settoheight)
	(\settowidth, Predefined lengths): Translate these nodes to
	French, with taking into account changes done to latex2e.texi
	(Special insertions): Fix menu entry syntax.
	(Reserved characters): Translate this node to French
	(Symbols by font position): Add this node, after update made to
	latex2e.texi

2015-12-14  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Top): section->rubrique, sectionement->rubricage
	(@LaTeX{} command syntax): Add node ``\makeatletter and \makeatother''.
	(\makeatletter and \makeatother): New node, translated from
	English version, plus improvement as changes in latex2e.texi, plus
	\@startsection example made a separate node with more information.
	(\@@startsection): New node.

	* latex2e.texi (\makeatletter and \makeatother): Change ``read by
	TeX and LaTeX'' to ``read by TeX for LaTeX''. Change ``character
	code'' to ``character category code'', and introduce term
	``catcode''. Use the term ``private commands'' for commands with
	an ``@'' in their names. Improve wording about command names with
	a single non-letter. Suppress chiasmus of ``\documentclass and
	\usepackage'' w.r.t. ``.sty and .cls files''.  Add TODO @comment
	about making \@startsection a separate node, see French version.
	(\makelabels) Add reminder TODO comment to align on French
	version.

2015-12-10  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (array, center): Adjust wording, add examples.

2015-12-05  Kevin Ryde <user42_kevin@yahoo.com.au>

	* ltx-help.el (ltxh-buffer-substring): defalias to use
	'buffer-substring-no-properties if available.
	(latex-help-get-cmd-alist): support :: and (line 123).
	Mail of 03 Dec 2015 17:49:05.

2015-12-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (abstract): Add examples.

2015-12-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\onecolumn, \twocolumn): Adjust wording (make
	first sentence a one-sentence description).

2015-12-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\flushbottom): Adjust wording.

2015-12-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newtheorem): Add case of no optional arguments
	to synopsis, with summary in body.

2015-11-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcommand and \newenvironment): Minor wording
	adjustments, mostly for consistency with subsequent practice.

2015-11-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Cross references): Add examples, and description of
	forward references.

2015-11-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Counters): Adjust wording and add examples
	for \setcounter and \addtocounter.

2015-11-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Counters): Add variable `counter' to description
	of the counter-formatting commands.  (From latex.texinfo.)

2015-11-27  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\makeatletter and \makeatother): Adjust wording.

2015-11-26  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\newsavebox, \newtheorem, \newfont): Complete
	translation of this node, and align on latest English version.

	* latex2e.texi (\newtheorem): Typo.
	(\newfont): `11pt' -> `1100' in the example, when the at clause
	has the `scaled FACTOR' form.

2015-11-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\makeatletter and \makeatother): Add node for this,
	as a subnode of the description of definition of commands.

2015-11-25  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Reserved characters): Split out symbols by font
	position.  Distinguish between output in text body font and
	output in typewriter font.

2015-11-09  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\newcommand & \renewcommand): Introduce the
	concept of positional parameter.
	(\newenvironment & \renewenvironment): Remove the text that
	starred & nonstarred forms have the same effect, and restore the
	original text that starred forms ban the use of \par in arguments.
	Tell that the only allowed characters in environment names are
	letters and character `*'. Use the term positional parameter, and
	tell that expansion is within begdefn, not within environment,
	which was misleading. @samp{...}-ify `Shakespear' outside of
	@example...@end example.

	* latex2e-fr.texi (Output files): Typo.
	(tabular): Typoes.
	(\newcommand & \renewcommand): Typo. Introduce the concept of positional parameter.
	(\newenvironment & \renewenvironment): Complete the translation
	and make the same text improvements as in latex2e.texi.

2015-11-06  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (\parbox): Tell that `position=m' equates the
	default behaviour.

	* latex2e.texi (\parbox): Same as latex2e-fr.texi.

2015-11-05  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\fussy): Typo.

	* latex2e-fr.texi (verbatim): Translate this node.
	(\verb): Clean-up left over English words.
	(\obeycr & \restorecr, \fussy, \sloppy): Translate this node.

2015-11-04  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (tabular): wording `@code{*-expression}' -> `@code{*}-expression'.

	* latex2e-fr.texi (tabular): Complete translation of this node.

2015-11-03  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\parbox): Correct description of \parbox vertical
	alignment after comment from Denis Bitouzé.

	* latex2e-fr.texi (\parbox): Same as for latex2e.texi.

2015-11-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\vspace): mention behavior if used in hmode.

	* latex2e.texi (throughout): consistently use ... instead of
	.. for code ellipses.

2015-10-27  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (enumerate): Typo.
	(itemize): Restore missing example.
	(thebibliography): `label' -> `étiquette', `cite_key' ->
	`clef_de_cite'. Change wording concerning `\refname' in standard classes.
	(\bibitem, \cite, \nocite, Using BibTeX, theorem): Translate this node.
	(\cleardoublepage, \newpage): Improve wording `page actuelle' ->
	`page courante'.
	(\typeout): Typo `\espace' -> `\space'.

	* latex2e.texi (\bibitem): 1/ Add to concept index "citation
	key". 2/ @var{...}-ify word label where applicable for consistency
	with @var{cite_key}. 3/ `see next section' -> `@pxref{\cite}'.
	(\cite): 1/ Add reference to node \bibitem. 2/ @samp{...}-ify the
	example possibly produced typeset text.
	(\nocite): Add `Synopsis:' and `@example ... @end example'
	encapsulation thereof.
	(Using BibTeX): 1/ `@var{style}' -> `@var{bibstyle}'. 2/
	`@file{@var{bibfile}.bib}' -> `@file{@var{bibfile1}.bib},
	@file{@var{bibfile2}.bib}, @dots{}'.

2015-10-27  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (titlepage): Add example.

2015-10-25  Jim Hefferon  <jhefferon@smcvt.edu>

	* Correct errors reported by CTAN, including my lack
	of a SVN $Id tag for the README.

2015-10-24  Jim Hefferon  <jhefferon@smcvt.edu>

	* New release, version of October 2015, for CTAN, since there
	were lots of updates over the summer.  Just English for the
	moment; we need to smooth the process for other languages.

	* Makefile (distzip): the phony target was not doing the recipies;
	changed name of a variable to distzip.

2015-10-12  Karl Berry  <karl@freefriends.org>

	* Makefile (dist): remove spanish stuff, just do english.

2015-10-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes): Add remark that getting biblio
	references in footnotes depends on the bibliographic style.

2015-10-11  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Page breaking): Translate menu entries
	(\cleardoublepage, \clearpage, \newpage, \enlargethispage)
	(\pagebreak & \nopagebreak): Translate these nodes
	(Footnotes, \footnote, \footnotemark, \footnotetext)
	(Footnotes in a table, Footnotes in section headings): Take into
	account Jim's edits of 2015-10-09, 2015-10-04, 2015-10-03, &
	2015-09-29.

	* latex2e.texi (\cleardoublepage, \clearpage): Clarify that only
	pending floating tables & figures are cleared.
	(\newpage): `see @code{\clearpage} above' -> `@pxref{\clearpage}'
	(Footnotes): Make the exact quotation of Noël Coward, and correct
	his first name spelling.

2015-10-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Multiple references to a footnote): Add this node.
	Adjust related nodes.

2015-10-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes of footnotes): Add this node.

2015-10-10  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\makelabels): Add more on how to customize
	label sizes, etc.

2015-10-09  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi (Environments): Merge menu entries for nodes
	quote & quotations after Jim's edits of 2015-09-28
	(quotation and quote): Merge nodes quote & quotations after Jim's
	edits of 2015-09-28
	(tabbing): Translate this node.

2015-10-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes in a section heading): Add node,
	provide examples.

2015-10-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\makelabels): @var{...}-ify argument 'to addess',
	and @code{...}-ify class name.
	(\signature): Improve wording. Remove spurious space before '\\'
	in the \signature example with picture.

	* latex2e-fr.texi (Low-level font commands): typo.
	(\item): typo.
	(Letters): Translate from Jim's updates.
	(Letters): Remove menu entries for \startbreaks & stopbreaks, as
	per Jim's update.
	(\makelabels): Translate from Jim's updates and improve text
	significantly.
	(\name): Translate this node.
	(\opening): Translate this node.
	(\ps): Add synopsis, as per Jim's update.
	(\signature): Translate this node.
	(\startbreaks, \stopbreaks): Remove nodes \startbreaks &
	stopbreaks, as per Jim's update.
	(\telephone): Take into account Jim's updates.

2015-10-04  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes in a table): Provide examples.
	Fold minipage discussion into opening.

2015-10-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes, Footnotes in a table): Provide examples.
	This is a confusing topic.

2015-09-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Footnotes): Provide examples.

2015-09-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\quotation and \quote): Combine the two,
	contrast them, provide example.

2015-09-27  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Letters): \opening is required.

2015-09-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\makelabel): Reword, add examples.  Omit \stopbreaks
	and \startbreaks as those are not user-directed commands.

2015-09-25  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\signature): Reword, add examples.

2015-09-23  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Letters \address, \closing, \location): Add examples.
	The intent of \location is hard to understand; for Willy the Mailboy?

2015-09-23  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Letters): Add synopsis, examples.

2015-09-22  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (filecontents): Add Jim's 2015-09-18 (r439) edits.
	(\addvspace): Add Jim's 2015-09-13 (r432) edits.
	(\vspace): Translate this node.

	* latex2e.texi (filecontents): Use `write' instead of  `create' also in concept index. Improve wording


	* latex2e{,-es,-fr}.texi: Improve Emacs cookie to force LF eol

	* latex2e{,-es,-fr}.{dbk,html,info,txt,xml}: Set svn property svn:eol-style to LF

	* latex2e-{es,fr}.{dbk,html,info,txt,xml}: Compile these files
	again, because of eol problem.

2015-09-21  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-{es,fr}.{dbk,dvi,html,info,pdf,txt,xml}: Compile these files

	* latex2e-fr.texi (\addvspace): typo.

2015-09-18  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (filecontents): Corrections suggested by JB.

2015-09-17  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* ChangeLog: Correct typo on Jim's surname Hefferson->Hefferon.

	* latex2e.texi (Subscripts & superscripts): typo sub->super. Improve wording.
	(\hrulefill \dotfill): Use `@dmn{...}' rather than
	`@tie{}...' for the spacing to unit.

	* latex2e-fr.texi (\newline): Translate this node.
	(figure): place \label after caption, following Jim's 2015-09-11
	change.
	(Subscripts & superscripts): translate Jim's 2015-09-15 update.
	(\hrulefill \dotfill) Merge nodes \hrulefill and \dotfill, and
	take Jim's 2015-09-13 additions

2015-09-15  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Subscripts & superscripts): Add examples.

2015-09-15  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (Starting and ending): Add @cindex environment
	(Spaces, \(SPACE) and \@@, \(SPACE) after CS): Move text how to
	control space gobbling after a control sequence from node
	`\(SPACE) and \@@' to a new node `\(SPACE) after CS', and add more
	tricks to do that.

	* latex2e-fr.texi (Starting and ending)
	(Spaces, \(SPACE) and \@@, \(SPACE) after CS)(Spaces): Same
	changes as for latex2e.texi.
        (Overview): add @: after some abbrev ending periods.
	(Font styles): Follow Karl's changes of
	2015-04-26, "deux choses très différentes"->"deux constructions
	sans relation l'une avec l'autre"
	(Starting and ending): Follows Karl's change of 2015-04-26
	(\- (hyphenation)): Translate this node.
	(\noindent): Follow Jim's changes of 2015-09-14: example + how to
	suppress indentation in a whole document.
	(Spaces, \@@, \(SPACE)): rename node \AT->\@@ following Karl's
	change of 2015-05-05, and \SPACE->(SPACE) following Jim's change
	of 2015-09-08.
	(\frenchspacing) Add new nodes, following Jim's edits of 2015-09-12.
	(beamer template, book template): Follow Karl's changes of
	2015-04-26: transpose to make alphabetical.
	(beamer template, tugboat template, beamer template): Translate
	these nodes.
	(Command line): Follow Karl's changes of 2015-04-26: xref TeX
	engines, --help, etc.
	(eqnarray): Follows Karl's change 2015-04-26 `much
	like'->`similar', plus typo.


2015-09-14  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\noindent): Add example.

2015-09-14  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (Spacing in math mode): Add missing @findex entries
	for \thickspace, \medspace & \thinspace. Typo tht->that.

	* latex2e-fr.texi (Units of length, Spacing in math mode):
	Translate these nodes, move the math spacing to the `Spacing in
	math mode' node, following the Jim's 2015-09-06 change.

2015-09-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\hrulefill \dotfill): Add example, merge the
	two nodes.

2015-09-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\addvspace): Add explanation, and link to
	Lengths.

2015-09-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\vspace, \vfill): Add wording and example to
	each node.

2015-09-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\frenchspacing): Move node to Spacing.

2015-09-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\frenchspacing): Add this node.

2015-09-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newline): Add description of what happens in
	a table.  Add example.

2015-09-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\\): Split \\ from \\*.  Mention
	\newline.  Add example.

2015-09-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\(SPACE) and \@): Combine the two nodes.  Include
	description of \@ both before and after a period.

2015-09-08  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\(SPACE)): Extend explanation.  Change name to
	include the parens (possible a newbie would type \SPACE?)

2015-09-07  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Lengths, \hspace): Give a definition of rigid
	and rubber lengths, and of infinite stretchability.  Adjust
	definition of \hspace to not use square braces as metacharacter.

2015-09-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Spacing in math mode): Move math mode lengths
	to here and add whether they work also in text mode.

2015-09-04  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi: Add macroes BES & BESU to support compilation of math symbols with texi2pdf.
	(Symbolic footnotes): Complete translation of this node
	(Making paragraphs): typo ligne->lignes.
	(Marginal notes): Translate this node.
	(Math formulas): Translate this node.
	(Subscripts & superscripts): Translate this node.
	(Math symbols): Initiate translation of this node (not yet complete...).
	(Spacing in math mode): Translate section title.
	(\thispagestyle): Translate this node.
	(Spaces): typo, change gender of word `espace' (feminine instead
	of masculine as far as spacing is concerned).

	* latex2e.texi: Add macroes BES & BESU to support compilation of math symbols with texi2pdf.
	(Math symbols): typo succceeds-> succeeds, (symbols \succ & \succeq).
	(Marginal notes): Add reference to Document class options as far
	as one-sided, two-sided and two-column layouts are concerned.
	(Subscripts & superscripts): Use @var{...} instead of @i{...} for argument `exp'.
	(Math symbols): Use macros BES and BESU in roder to fix broken texi2pdf compilation.
	(Math symbols): typo operatior->operator (symbols \cap, \circ, \cup, \bigodot, \oplus, \otimes
	(Math symbols): symbol \varsigma : variant \pi->\sigma ; symbol \vartheta : variant \pi->\vartheta.
	(\makebox): reword is specified->can be overriden, because width is optional.
	(\makebox): @code{...}-ify environment name picture.

2015-08-29  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (\linethickness): Typo.
	(\thicklines, \thinlines, \shortstack, \/, \hrulefill)
	(\bigskip \medskip \smallskip, tabular, Lengths, \dotfill, \addvspace): Translate this node.
	(table): Typo.
	(Units of length): Add this node from Jim's 2015-08-26 edits.

	* latex2e.texi (Lengths): Make `length' a @dfn{...} rather than a @code{...}.
	(Units of length): add concept index entries `ex' and `m-width'
	 (\addvspace): @var{...}-ify word `length'.


2015-08-27  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (Units of length): Use `@dmn{...}' rather than
	`@tie{}...' in new node added by Jim.

2015-08-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Units of length): Add new node in Lengths.

2015-08-25  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (tabular): typo : horozontal->horizontal.

2015-08-24  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (picture): (width,height)(x offset,y offset)->(@var{width},@var{height})(@var{xoffset},@var{yoffset})
	(picture): make position a concept index entry, and @dfn{...}-ize it.
	(picture): Improve wording as far as the two arguments of picture environment are concerned.

	* latex2e-fr.texi (minipage): complete translation of this node.
	(picture): Translate this node.
	(\framebox (picture)): @var{width}->@var{largeur}

2015-08-23  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (file preamble): Add comment about glossary
	resources useful for French translation
	(file preamble) improve wording.
	(Layout): add Float menu entry, as per Jim Hefferon's 2015-08-22 and 2015-08-21 changes.
	(Floats, figure, table) Translate Jim Hefferon's 2015-08-22 and
	2015-08-21 changes to French.
	(\centering): typo
	(flushleft, \raggedright): Improve wording.
	(flushright, \raggedleft): Translate these nodes.
	(quotation, Making paragraphs): ligne blanche->ligne à blanc

	* latex2e.texi (Floats): typo insert comma.
	(Floats): figure->float
	(Floats): make "float page" a concept index entry, and @dfn{...} it.
	(Floats): restrict the word "specifier" to one letter element of
	parameter, use word "argument" for the full string of specifiers.
	(Floats): typo acceptible->acceptable
	(figure): text->title, improve @var name
	(flushright): string->control sequence
	(table): make title a @var, and add missing optional loftitle argument.

2015-08-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Floats): Change some wording, move description of
	how float body is typeset to figure and table nodes.

2015-08-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (various): Corrected Subversion mistake overwriting
	changes in other spots.

2015-08-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Floats, figure, table): Break the float material
	common out to a separate node.  Add descriptions of how to deal
	with issues.  Shrink the figure and table nodes by the common
	material.

2015-08-20  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (Output files, @TeX{} engines, \line)
	(Glossaries): Remove @acronym on Karl's request
	(\raggedright): Translate this node to French.

	* latex2e.texi (Output files, @TeX{} engines): Remove @acronym on Karl's request

	* latex2e-es.texi (Glosarios): Remove @acronym on Karl's request

2015-08-19  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\parbox): reword.
	(flushleft): missing period.

	* Makefile (xref_suffixes): no auxs or tocs.

2015-08-19  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (flushleft): string->control sequence.

	* latex2e-fr.texi (flushleft): Translate this node. Reword string->control sequence.

	* Makefile (xref_suffixes): New variable usable for realclean target doing a *real* clean.

	* latex2e.texi (\oval): Reword 'portion' to 'half' and also add
	optional arguments 'tr', 'br', 'bl' and 'tl'.

	* latex2e-fr.texi (Top, Starting and ending): Starting &
	ending->Starting and ending, node renaming.
	(Overview): typo in chapter title
	(Overview): Translates 2015-08-14/18 changes by Jim Hefferon,
	this implies making node 'Starting and ending' a subnode of node
	'Top', and creating new nodes 'Output files', '@TeX{} engines' and
	'@LaTeX{} command syntax'
	(Environment, Declaration): new nodes, sbubnodes of '@LaTeX{}
	command syntax', translated from 2015-08-14 change by Jim
	Hefferon.
	(description, enumerate): Translate 2015-08-17 changes by Jim
	Hefferon.
	(list, \item): Translate 2015-08-13 changes by Jim Hefferon: add
	\item node, and subordiante it to list node.
	(\multiput): Finalize translation of this node.
	(\oval): Translate this node, with rewording portion->half. Add
	also optional arguments 'tr', 'br', 'bl' and 'tl'.

	* latex2e.texi (Overview): file-> input file, for sake of clarity.
	(Overview): Programs that implementation @LaTeX{}->Programs that
	can compile @LaTeX{} source.
	(Output files, @TeX{} engines): Use @acronym{...} for DVI and PDF.
	(@TeX{} engines): command->system command, for sake of clarity.
	(@LaTeX{} command syntax): command->command names, for sake of clarity.

2015-08-18  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (eqnarray, equation): Add more description.  Add
	example to eqnarray.  Add note about amsmath to equation.

2015-08-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (enumerate): Add more description. Combine best
	parts of this and description description.

2015-08-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (description): Add error message if \item is
	left out.

2015-08-14  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Environment, Declaration): Create these two nodes
	subordinate to LaTeX command syntax.  Refer node item to LaTeX
	command syntax.

2015-08-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (list, \item): Add node for this command, subordinate to
	the list node.

2015-08-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (array): Fix description of optional position
	argument for array.

2015-08-12  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (displaymath): Integral wrong. Couple of other
	typos.

2015-08-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (document): Add nodes for \AtBeginDocument and
	\AtEndDocument.

2015-08-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (displaymath): Add detail and an example.  Include
	note on why $$ is not recommended.

2015-08-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (description): Add detail and an example.

2015-08-08  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (center, \centering): Add detail, including
	distinguishing the two and examples.

2015-08-05  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e.texi (\indent): remove "width of" concering concerning
	\parindent length.

	* latex2e-es.texi (Acentos): Change "sobre" to "debajo de" for \b
	(\indent): change "al ancho de la longitud" to "la longitud"
	concerning \parindent length.

	* latex2e-fr.texi (Tables of contents): Translation of this node.
	(\alph \Alph \arabic \roman \Roman \fnsymbol, Boxes): Typoes.

2015-08-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (array): Adjust wording.

2015-08-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (array): Refer to tabular for details.  Add suggestion
	to use amsmath to get fences, and change example to make
	justification vaguely defensible.

2015-08-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (multicolumn): Adjust description of how intercolumn
	material is placed.  I shall get this right eventually, I suppose.

2015-08-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (multicolumn, vline, cline, hline): Adjust
	wording.

2015-07-31  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (vline, cline, hline): Add examples.  Also describe
	how columns are counted.

2015-07-30  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (Top): Correct menu item French translation for "Making paragraphs"
	(itemize): typo, remove left-over English word "dash"
	(Making paragraphs): typoes.
	(\indent, \noindent, \parskip, \parbox): Translate to French these nodes.

	* latex2e.texi (Text symbols): Correct -- for --- for en-dash

2015-07-29  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-es.texi (Acentos): Make references between \underbar and \b.

	* latex2e.texi (Accents): Make references between \underbar and \b.

	* latex2e-fr.texi (Accents, quote): Translate these nodes.
	(Accents): Make references between \underbar and \b.

2015-07-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (tabular, multicolumn): Add more content,
	and examples.

2015-07-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Page layout parameters): Add marginal notes
	parameters; correct some default values and adjust wording
	for uniformity.

2015-07-15  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Page layout parameters): Add paperheight
	and paperwidth; also list those sizes in Document class options.

2015-07-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Done all symbols.

2015-07-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Through the S's.

2015-07-10  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Through the P's.

2015-07-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Into the P's.  Move
	the unicode glyph to the start of each entry to make
	easier scanning for the desired symbol.

2015-07-08  Vincent Belaïche  <vincent.belaiche@gmail.com>

	* latex2e-fr.texi (Line breaking, \savebox): Translation to French.
	(Sectioning): Typo.

2015-07-08  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Through the N's.

2015-07-07  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Through the M's.

2015-07-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): More L's.

2015-07-05  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Unicode code points into L's.

2015-07-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Unicode code points through G.

2015-07-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Unicode code points through D.

2015-07-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Unicode code points through B.

2015-07-01  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Math symbols): Add unicode code points to a few;
	experiment with relevant info.

2015-06-23  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\flushbottom, \raggedbottom): Expand definition.
	Change word from `declaration' to `command'.

2015-06-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\twocolumn): Expand definition of the two-column
	parameters.

2015-06-21  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\twocolumn): Expand definition of the double
	float parameters.

202015-06-20  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\twocolumn): Add example.

2015-06-20  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\value, \newlength): wording.

2015-06-19  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Document class options): mention the geometry package.
	(@TeX{} engines) <xelatex>: mention xdv files.
	(\newcommand & \renewcommand): reorder examples; still in process.

2015-06-18  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newsavebox): wording.

2015-06-17  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newfont): put obsolete note earlier.
	(\newtheorem): wording.

2015-06-16  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Low-level font commands): reformat the tables.

2015-06-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Low-level font commands): More about options.

2015-06-11  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Low-level font commands): Add some information about
	options.

2015-06-09  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: Let's consistently have one blank line
	between the sectioning command and the following index entries,
	one blank line above @example, and two blank lines above @node.
	It's a theory ...
        (\newfont): wording.  Typos.

2015-06-09  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newfont): Couple of minor wording changes.

2015-06-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newfont): Expand definition.  Add example.
	Warn that it is obsolete.

2015-06-06  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newtheorem): Expand definition.  Add examples
	covering both optional arguments.

2015-06-05  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newsavebox): Expand definition.

2015-06-04  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Document class options): To a4paper, etc.,
	add note that pdflatex, xelatex, lualatex do not set physical
	page size.

2015-06-03  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\value): Expand description, put in warning about
	\protect, add examples.

2015-06-02  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\protect): Expand description, add examples.

2015-05-30  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newlength): Add details, including that the name
	must begin with a backslash.

2015-05-29  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\providecommand): Add node.

2015-05-28  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcommand & \renewcommand): Realized environments
	do delimit scope.

2015-05-27  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcommand & \renewcommand): Copy recent edits to
	\newcommand over to \newenvironment; make needed adjustments.

2015-05-26  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcommand & \renewcommand): Add two fine points
	about \newcommand.

2015-05-25  Karl Berry  <karl@freefriends.org>

	* Makefile (texi2html_top): New variable.
	(texi2html): use it.

	* latex2e.texi (\label),
	(Font styles),
	(\newcounter, \stepcounter, \refstepcounter),
	(\newcommand & \renewcommand):
	tweak new and old examples and text.
	(Math formulas): Consistently use "xx" with "not in plain".

2015-05-25  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcommand & \renewcommand): Add examples.  Drop
	square brackets around * since square brackets are significant.

2015-05-22  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\label): Add example of \label picking up
	numbering in two places.

2015-05-19  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Font styles): Add that \mathxx commands do not
	nest.  Move them to make a different, third, area.  Break \emph out of
	non-semantic command list.

2015-05-17  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (many nodes): Corrections to typos reported by
	Justin Gassner.

2015-05-16  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\newcounter, \stepcounter, \refstepcounter): Expand
	definitions, particularly of the definition of one counter numbered
	within the other.

2015-05-15  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (\usecounter): Expand definition; give example.

2015-05-13  Jim Hefferon  <jhefferon@smcvt.edu>

	* latex2e.texi (Counters): reword to clarify backslash.

2015-05-12  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (@settitle): unofficial.
	(About this document): reword a bit.
	(UPDATED): now it's May.
	More indexing.

	* Makefile (check-dw): new target.
	* latex2e.texi: remove doubled words.

	* Makefile (txt_files): add aspell.en.pws.
	(check-en): try spell-en first.

2015-05-08  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Non-English characters): tersely define \dj \DJ
	and \ng \NG (without typesetting).
	* Makefile (spell): exclude \command names.
	* aspell.en.pws: new file.

2015-05-08  Jim Hefferon  <jhefferon@smcvt.edu>
        and Karl Berry  <karl@freefriends.org>

        * latex2e.texi (LaTeX command syntax): (Re-)include description of
        command syntax, inspired by alt-latex-info.

2015-05-08  Karl Berry  <karl@freefriends.org>

	* Makefile (en, es, fr, spell, svr, svd): new targets.
	(all): rework target.
	(all_suffixes, txt_files): new vars.

2015-05-07  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: some typos.
	* latex2e-es.texi: can't use \sup with current texinfo.tex.
	* Makefile: simplify to be maintainable at the cost of some
	redundancy (sorry, Vincent).

2015-05-06  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\alph \Alph \arabic \roman \Roman \fnsymbol):
	use @U to show the footnote symbols.

2015-05-05  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: More indexing.  Always ", etc.".  Use of @dmn.
	(Modes): re-paragraph the descriptions.
	(\@@): Rename from \AT, now that Texinfo can handle @ in node names.

2015-04-26  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Starting and ending): rename from
	Starting & ending.  Leave anchor behind.

	* latex2e.texi (Starting & ending): make a section.
	Notes for a new syntax section.
	More on the example document.
	From Jim, 22 Apr 2015 15:06:24 +0000.
	(beamer template, book template): transpose to make alphabetical.
	(Command line): xref TeX engines, --help, etc.

2015-04-23  Jim Hefferon  <jhefferon@smcvt.edu>
        and Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Output files, TeX engines): new nodes.
	Jim's original msg, 20 Apr 2015 12:42:23.
	(Independently, eliminate some "very"s throughout.)

2015-04-20  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (About this document, Overview): more clearly
	separate these nodes.  From Jim, 14 Apr 2015 19:57:21.

	* latex2e.texi (Document classes): Add descriptions of built-in
	LaTeX classes.  From Jim, 12 Apr 2015 22:10:47.

2015-04-10  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Font styles): mention \nocorr and \nocorrlist.
	(\/): mention automatic insertion from \textit and \itshape, etc.
	From Jim, 10 Apr 2015 00:13:39.

2015-04-08  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\bigskip \medskip \smallskip): add defaults,
	other tweaks.  From Jim Hefferon, 7 Apr 2015 23:45:50.

2015-04-07  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: start update for 2015.
	Index pict2e (was curve2e) and other packages.
	(\put): format synopsis like others, etc.
	(\newcounter): metavar name supercounter.

2015-02-22  Karl Berry  <karl@freefriends.org>

	* Makefile (texi2html): use -c TOP_NODE_UP_URL
	 (to be in next Texinfo release).

	* latex2e.texi (Math functions): avoid \sup, since @sup
	is now a Texinfo command (for the next release).

	* latex2e.texi (\alph \Alph \arabic \roman \Roman \fnsymbol):
	\Roman for second @item.  Typo reported by Jose Atria.

2014-11-19  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Progress translation to French

	* Makefile: add targets check-fr, check-en & check-es.

	* latex2e.texi (node figure): typo occuped->occupied.
	(node filecontents): Make it clear that it is about
	files not documents.

2014-10-20  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile: Add target `check' to compile each manual once with tex
	and once with makeinfo. This is faster than using target `all'.

2014-10-19  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\setcounter): replace @var{\counter} by @var{counter}

	* latex2e-es.texi (\setcounter): Same change as latex2e.texi

	* latex2e-fr.texi (\setcounter): Same change as latex2e.texi.
	Progress Translation to French.

2014-10-17  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-es.texi (\pagenumbering): use @backslashchar{} within
	@vincentb in order to compile with tex.

2014-10-17  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newcommand & \renewcommand): fix explanation of
	optarg; its default value is never "def", that was a misreading
	of latex209.dtx.  Rename to optargval.  From Vincent.

	* latex2e.texi (\alph): avoid UTF-8 or @document*, sorry.
	(\thinspace): this is not the place to use @dmn.
	(figure) <bottomnumber, etc.>: these are counters not control
	sequences, so no \.

	* latex2e-es.texi (\put): @vincentb, not @vincenb.

2014-09-25  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\put): Make coordinates within @var{...} and add
	explicit reference to them in the text.
	(\usebox): typo add missing closing curly bracket

	* latex2e-es.texi (\put): Same as latex2e.texi (except that
	\usebox node was ok).

	* latex2e-fr.texi (nodes \put, \usebox): Same as
	latex2e.texi. Progress translation to French.

2014-09-19  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (document header): Set @documentencoding and
	@documentlanguage.
	(document footer): Add Emacs file local variable to specify
	ispell dictionary.

	* latex2e.texi (\pagenumbering): Clarify that \pagenumber
	also resets page number to 1.
	(\alph \Alph \arabic \roman \Roman \fnsymbol):
	add UTF-8 symbols next to symbol names for \fnsymbol.
	(\newcounter): rename @var{cnt} ->
	@var{countername}, and @var{countername} -> @var{super}, and make
	it explicit in the text that @var{super} is the name of a counter.
	(\newlength): @code{length} command -> @dfn{length} command.
	(document footer): Add Emacs file local variable to specify
	encoding.

	* latex2e-es.texi: Similar changes as latex2e.texi.
	(\newlength): Also translate length to longitud, as this is
	not a reserved word, we just mean an instruction to manage one
	length.

	* latex2e-fr.texi: Similar changes as latex2e.texi. Progress
	translation to French.

2014-09-10  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (\thinspace): em -> @dmn{em}.

	* latex2e-es.texi (\thinspace): same as latex2e.texi.

	* latex2e-fr.texi:  Progress translation to French.

2014-09-08  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-fr.texi: Progress translation to French.

	* latex2e.texi (node Modes): replace `-' by `---', and `The box
	make by' by `The box made by'.
	(node Math miscellany): correct typo `for examp*l*e'.

2014-08-30  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e-es.texi (\vector): correct bug involved by renaming
	y-slop/x-slop to declivex/declivey --- as I used @vincentb macro
	encapsulation to mark my change, it made \ of \vector no longer a
	"other" character.

2014-08-29  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* Makefile: add definition of variable all, for clean to work. Add
	squeaky as a synonym of realclean. Add in comment generic line for
	other language being zipped to to dist.

	* latex2e-fr.texi: Progression traduction

	* latex2e.texi (node Page layout parameters): correct typo clase -> classes
	(node array): `in that row' -> `in each row of that column

	* latex2e-es.texi (node array): `el número de elementos y deben
	tener el formato' -> `cual formato debe tener cada linea en esta
	columna'


2014-08-24  Vincent Belaïche  <vincentb1@users.sourceforge.net>

	* latex2e.texi (node Boxes): add @code{...} encapsulation.
	(\dashbox): replace @code{...} by @var{...} for \dashbox
	parameters in last sentence. (nodes \line & Glossaries) add
	@acronym{...} around CTAN.
	(\makebox of picture): use @example environment for the
	synopsis, and @var{...} for the parameters.
	(\vector): rename x-slope, and x both to xslope, respectively
	for y-slope and y, and use consistently @var{...} encapsulation.

	* latex2e-es.texi (node Cajas): same as latex2e.texi.
	(\dashbox): same as latex2e.texi. Rename parameter
	@var{dlargo} to @var{glargo}, with 'g' for guión (aka
	dash).
	(nodes \line & Glossarios): same as latex2e.texi.
	(\makebox of picture): same as latex2e.texi.
	(\vector): same as latex2e.texi.

	* latex2e-fr.texi (node Boxes): same as latex2e.texi.
	(\dashbox): same as latex2e.texi.
	(nodes \line & Glossaries): same as latex2e.texi.
	(\makebox of picture): same as latex2e.texi.
	(\vector): same as latex2e.texi.
	Progress further translation to French.

2014-08-17  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi: (node Layout) Add @code{...} around \headheight
	and \footskip in `Page layout parameters' menu entry

	* latex2e-es.texi: Same change as in latex2e.texi

	* latex2e-fr.texi: Same change as in latex2e.texi. Continue
	progressing translation to French.

2014-08-11  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi: Add @code{...} encapsulation in some places to
	class names letter, slides, book, report, article, and to
	environement theorem.
	(Document class options) Add missing closing bracket.

	* latex2e-es.texi: Same changes as for latex2e.texi.

	* latex2e-fr.texi: Same changes as for latex2e.texi. Progress
	translation to French.


2014-08-10  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi: (Overview) change wording about case sensitivity.

	* latex2e-es.texi: (Descripción) same change change as for latex2e.texi about case sensitivity.

	* latex2e-fr.texi: (Overview) same change change as for
	latex2e.texi about case sensitivity. (Whole document) Put in place
	same structure as for original and progress translation.

2014-08-01  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e-fr.texi: Creation --- still very approximate & preliminary...

	* Makefile: Make it generic

2014-07-20  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi (\LaTeXe),
	* latex2e-es.texi (\LaTeXe): document LaTeX2e log.

2014-05-19  Karl Berry  <karl@freefriends.org>

	* May 2014 release for TeX Live 2014.

2014-02-28  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (filecontents): tweak language.
	(Font styles): mention my disagreement with the oft-stated
	notion that \tt, et al., are "obsolete".

2014-02-27  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi (filecontents): Clarify that LaTeX2e default
	filecontents environment DOES NOT overwrite existing files, you
	need filecontents package for that.

	* latex2e-es.texi (filecontents): Align on the English version.

2014-02-26  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e-es.texi: Align Spanish translation with changes made by
	Karl on 2014-02-23, and also some changes done before that.

2014-02-25  Vincent Belaïche  <vincent.b.1@hotmail.fr>

	* latex2e.texi: Correct typo, rm duplicate 2014 in copyright notice.

2014-02-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (@title): put the "unofficial" label here,
	not just the subtitle.
	(Typefaces): Rename to "Fonts", since the chapter is about both,
	and the latter is far more commonly used.  Also fix truncated
	sentence about italic correction.

2014-02-02  Vincent Belaiche  <vincent.b.1@hotmail.fr>

	* latex2e-es.texi (\includeonly, \input): correct @code for
	@section titles, plus \@fnsymbol not \fnsymbol.
	http://gna.org/bugs/?21582

2014-01-31  Karl Berry  <karl@freefriends.org>

	* latex2e-es.texi (filecontents): new node from
	Vincent Belaiche. http://gna.org/bugs/?21569
	* latex2e.texi: likewise, plus edits.

2013-05-13  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Font styles): mention \oldstylenums.
	(picture): \unitlength default is 1pt.

2013-04-25  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\newcommand & \renewcommand): mention * form;
	try to clarify optional arg defaults.
	(beamer template): link to one of the many web pages about this.
	(\AT): make example output better match input.

2013-04-25  Mandar Mitra  <mandar.mitra@gmail.com>

	* ltx-help.el (latex-help): handle try-completion returning a
	string for a partial match, vs. t for exact match.

2013-04-25  Karl Berry  <karl@freefriends.org>

	* ltx-help.el: untabify, doc fixes.

2012-05-10  Karl Berry  <karl@freefriends.org>

	* May 2012 release for TeX Live 2012.

	* latex2e.texi (About this document): mention a few other docs.
	(eqnarray): don't use it; reference Madsen article
	(figure): ! float specifier, \*number parameters.
	(Math accents): mention \mathring.

2012-04-25  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: Index \extracolsep, template list at
	http://tug.org/interest.html#latextemplates, other template updates,
	etc.

2011-05-12  Karl Berry  <karl@freefriends.org>

	* May 2011 release for TeX Live 2011.

	* latex2e.texi (Text symbols): \texttwelveudash is a 2/3 em-dash,
	and remove spurious duplicate \textordfeminine entry.
	Report from Eric Jablow, 12 Apr 2011 05:17:47.

2011-05-05  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Document templates): Add link to
	http://www.howtotex.com/templates.

2011-05-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Overview): mention other engines, etc.
	(About this document): new node, for bug address, home page, etc.

	* latex2e.texi (Page layout parameters): discuss \linewidth
	vs. \columnwidth vs. \textwidth vs. \hsize in more detail.

2010-09-03  Karl Berry  <karl@freefriends.org>

	* latex2e-es.texi: translation to Spanish, from Nacho Pacheco,
	27 Aug 2010 19:15:47.
	* Makefile: also build the Spanish.

2010-09-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: update TUGboat sample.

	* Makefile (%.html): use new perl makeinfo (texi2html), so no need
	for g_t kludge.

2010-07-12  Karl Berry  <karl@freefriends.org>

	* July 2010 release for TL 2010.

	* latex2e.texi (Text symbols): add many from ltoutenc.

2009-12-25  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Symbolic footnotes): new section.

2009-11-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Accents): add \underbar, although it isn't an accent.
	(Math miscellany): better distinguish \underline and \underbar.

2009-10-27  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Line breaking, Page breaking): move to earlier,
	matching top-level @menu.

2009-09-07  Karl Berry  <karl@freefriends.org>

	* September 2009 release for TL 2009.

2009-04-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Indexes): add considerably more info.

2008-06-12  Karl Berry  <karl@freefriends.org>

	* 2.0 release for ctan.org/get/doc/latex-info, and TeX Live 2008.

2007-11-05  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \put \raggedbottom

2007-11-04  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \ps \psi \Psi \pushtabs

2007-11-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \protect

2007-10-29  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (math): \Pr \prec \preceq \prime \prod \propto.

2007-10-28  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Text symbols): \poptabs \pounds.

2007-10-25  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \perp \phi \pi \Pi \pm \pmod

2007-10-24  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \part \partial

2007-10-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \parskip

2007-10-22  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \parsep

2007-10-21  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \parindent

2007-10-20  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \parbox

2007-10-17  Karl Berry  <karl@freefriends.org>

	*  latex2e.texi: \paragraph \parallel

2007-10-16  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \pagestyle

2007-10-15  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \pagenumberingstyle \pageref

2007-10-11  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \oplus \oslash \otimes

2007-10-10  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \onecolumn \opening

2007-10-08  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \dot \oe \OE \oint \omega \Omega \ominus

2007-10-07  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\oddsidemargin)

2007-10-06  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \obeycr, \restorecr; split page/line breaking into
	separate chapters.

2007-10-05  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \not \notin \nu \nwarrow \o \O

2007-10-04  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\normalmarginpar \normalsize)

2007-10-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \nopagebreak

2007-06-27  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \flat \flushbottom

2007-06-26  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \evensidemargin \exists \exp \fbox \fboxrule
	\fboxsep

2007-06-25  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \epsilon \equiv \eta

2007-06-24  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \em \emptyset \encl

2007-06-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \doublerulesep \downarrow \Downarrow \ell

2007-06-22  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \dot \doteq \dotfill

2007-06-21  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \displaystyle

2007-06-20  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \deg \delta \Delta \det \diamond \Diamong
	\diamondsuit \dim \div

2007-06-19  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \ddag \ddagger \ddot

2007-06-18  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \dblfloatpagefraction \dblfloatsep
	\dbltextfloatsep \dbltopfraction

2007-06-17  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \day \month \year; put xref chapter earlier.

2007-06-16  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \dashbox \dashv \date

2007-06-15  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \d \dag \dagger

2007-06-14  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \cos \cosh \cot \coth \cup

2007-06-13  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \cong \coprod \copyright

2007-06-12  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \columnsep \columnseprule \columnwidth

2007-06-11  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \cline \closing \clubsuit

2007-06-03  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \chi \circ \circle[*]

2007-06-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \centering \chapter \check

2007-05-31  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \caption \cc \cdot \cdots

2007-05-30  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \cal \cap

2007-05-24  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \bottomfraction, \bowtie, \Box, \breve, \bullet, \c.

2007-05-23  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \boldmath, \bot.

2007-05-22  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\bigskip, \bmod)

2007-05-21  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Math Symbols): \big operators

2007-05-19  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Using BibTeX): \bibliography, \bibliographystyle

2007-05-18  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\bf, \bibitem)

2007-05-17  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (verse environment, \beta)

2007-05-15  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (titlepage, verbatim): environments.
	(\verb).

2007-05-14  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (theorem): environment.

2007-05-12  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (tabbing): environment.

2007-04-12  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\AT): new node for \@.

2007-04-11  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (tabbing): \a' \a` \a= for accents.

2007-04-10  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (Accents): \~ for tilde accent.

2007-04-09  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \|

2007-04-06  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \\ in its various contexts

2007-04-02  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: macron accent
	* latex2e.texi (Accents): \= for macron.

2007-04-01  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: \: \; \<

2007-03-30  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: through \.

2007-03-28  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: remove unneeded @page, fix over/underfull boxes, etc.

2007-03-27  Karl Berry  <karl@freefriends.org>

	* latex2e.texi: remove node pointers
	* latex2e.texi: \*: discretionary multiplication.

2007-03-21  Karl Berry  <karl@freefriends.org>

	* latex2e.texi (\SPACE): new node.

	* latex2e.texi: remove comments, single space after @node for ease
	of searching.

(This ChangeLog file is in the public domain.)