\documentclass[a4paper,twoside]{book} \usepackage{times} \usepackage{courier} \usepackage{helvet} \usepackage{makeidx} \usepackage[landscape,margin=1in,top=1in,bottom=1in]{geometry} \usepackage{color} \usepackage[colorlinks, plainpages=false, linkcolor=black, bookmarksopen, pdfauthor={Nicola Talbot}, pdftitle={Creating Flow Frames for Posters, Brochures or Magazines using flowfram.sty}, pdfkeywords={LaTeX;text frames;posters;brochures}]{hyperref} \usepackage[style=altlist,toc,number=none]{glossary}[2006/07/20] \usepackage{pgf} \usepackage[norotate,ttbnotitle,ttbnum]{flowfram} \usepackage{shapepar} % Define some commands for consistency and indexing \newcommand{\sty}[1]{\textsf{#1}\index{#1@\textsf{#1} package}} \newcommand{\env}[1]{\textsf{#1}\index{#1@\textsf{#1} environment}} \newcommand{\cmdname}[1]{\texttt{\symbol{92}#1}\index{#1@\texttt{\symbol{92}#1}}} \newcommand{\meta}[1]{\textnormal{\textless\textit{#1}\textgreater}} \newcommand{\appname}[1]{\texttt{#1}\index{#1@\texttt{#1}}} \newcommand{\pkgopt}[1]{\textsf{#1}\index{#1@\textsf{#1} option}} \newcommand{\key}[1]{#1\index{frame settings!#1}} % Glossary Stuff \storeglosentry{typeblock}{name=typeblock,description={The area of the page where the main body of the text goes. The width and height of this area are given by \protect\cmdname{textwidth} and \protect\cmdname{textheight}}} \storeglosentry{flow}{name=flow frame,description={The frames in a document such that the contents of the \protect\env{document} environment flow from one frame to the next in the order that they were defined. There must be at least one flow frame on every page.}} \storeglosentry{static}{name=static frame,description={Frames in which text is fixed in place. The contents are fixed until explicitly changed.}} \storeglosentry{dynamic}{name=dynamic frame,description={Frames in which text is fixed in place, but the contents are re-typeset after each page.}} \newcommand*{\staticordynamic}{\useGlosentry{static}{static} or \gls{dynamic}} \storeglosentry{frame}{name=frame,description={A rectangular area of the page in which text can be placed (not to be confused with a frame making command). There are three types: flow, static and dynamic.}} \storeglosentry{fcmd}{name=frame making command,description={A \LaTeX\ command which places some kind of border around its argument. For example: \protect\cmdname{fbox}.}} \storeglosentry{pglist}{name=page list,description={A list of pages. This can either be a single keyword: \texttt{all}, \texttt{odd}, \texttt{even} or \texttt{none}, or it can be a comma-separated list of individual page numbers or page ranges. For example: \texttt{\textless3,5,7-11,\textgreater15} indicates pages 1,2,5,7,8,9,10,11 and all pages after page 15. Note that these numbers refer to the actual value of the page counter, not the absolute physical page number.}} \storeglosentry{pgrange}{name=page range,description={Page ranges can be closed, e.g.\ \texttt{5-10}, or open, e.g. \texttt{\textless7} or \texttt{\textgreater9}.}} \storeglosentry{bbox}{name=bounding box,description={The smallest possible rectangle that completely encompasses the object.}} \newacronym{IDN}{identification number}{description={A unique number assigned to each frame, which you can use to identify the frame when modifying its appearance. Example: if you have defined 3 flow frames, 2 static frames and 1 dynamic frame, the flow frames will have IDNs 1, 2 and 3, the static frames will have IDNs 1 and 2, and the dynamic frame will have IDN 1.}} \newacronym{IDL}{identification label}{description={A unique label which can be assigned to a frame, enabling you to refer to the frame by label instead of by its IDN.}} \makeglossary \makeindex % Page layout stuff % set up some background frames to liven up the title page \newlength{\leftwidth} \newlength{\rightwidth} \computeleftedgeodd{\leftwidth} \setlength{\leftwidth}{-\leftwidth} \addtolength{\leftwidth}{0.4\textwidth} \setlength{\rightwidth}{\paperwidth} \addtolength{\rightwidth}{-\leftwidth} % only defined on page 1 unfortunately the document % has more than one page 1, so will need to change the settings after the title page \vtwotone[1]{\leftwidth}{magenta}{backleft}{\rightwidth}{[cmyk]{0,0.48,0,0}}{backright} % This is for the back cover. \vtwotone[none]{\rightwidth}{[cmyk]{0,0.48,0,0}}{lastbackright}{\leftwidth}{magenta}{lastbackleft} \vtwotonetop[odd]{1cm}{\leftwidth}{magenta}{oddtopleft}{\rightwidth}{[cmyk]{0,0.48,0,0}}{oddtopright} \vtwotonetop[even]{1cm}{\rightwidth}{[cmyk]{0,0.48,0,0}}{eventopleft}{\leftwidth}{magenta}{eventopright} % Set the margin width \setlength{\marginparwidth}{2cm} % now set up main document frames. Each page has a dynamic % frame for the chapter heading, and a flow frame for the % text. \newflowframe{0.6\textwidth}{\textheight}{0pt}{0pt}[main] \newdynamicframe{0.38\textwidth}{\textheight}{0.62\textwidth}{0pt}[chaphead] % swap them round on even pages \setflowframe*{main}{evenx=0.4\textwidth} \setdynamicframe*{chaphead}{evenx=0pt,clear} % make a frames to illustrate shaped frames \newstaticframe[none]{0.38\textwidth}{0.55\textheight}{0.62\textwidth}{0.45\textheight}[shapedt] \setstaticframe*{shapedt}{evenx=0pt} \newstaticframe[none]{0.38\textwidth}{0.45\textheight}{0.62\textwidth}{0pt}[shapedb] \setstaticframe*{shapedb}{evenx=0pt} % set the margins to appear on the spine side of the page \setflowframe*{main}{margin=inner} % put chapter headings in dynamic frame with IDL chaphead \dfchaphead*{chaphead} % append chapter minitocs to same dynamic frame. \appenddfminitoc*{chaphead} % change the style of the chapter headings % numbered chapters: \renewcommand{\DFchapterstyle}[1]{% \raggedright\sffamily\bfseries\Huge\color{blue}\thechapter. #1\par } % unnumbered chapters: \renewcommand{\DFschapterstyle}[1]{\raggedright\sffamily\bfseries\Huge\color{blue} #1\par } % Make thumb tabs (specify each tab to be 0.75in high) \makethumbtabs{0.75in} \enableminitoc % Thumbtabs are grey by default which looks a bit boring, % so change the colours \setthumbtab{1}{backcolor=[rgb]{0.15,0.15,1}} \setthumbtab{2}{backcolor=[rgb]{0.2,0.2,1}} \setthumbtab{3}{backcolor=[rgb]{0.25,0.25,1}} \setthumbtab{4}{backcolor=[rgb]{0.3,0.3,1}} \setthumbtab{5}{backcolor=[rgb]{0.35,0.35,1}} \setthumbtab{6}{backcolor=[rgb]{0.4,0.4,1}} \setthumbtab{7}{backcolor=[rgb]{0.45,0.45,1}} % change the text style on the thumbtabs \newcommand{\thumbtabstyle}[1]{\textsc{\sffamily #1}} \setthumbtab{all}{style=thumbtabstyle,textcolor=white} % set default page style \pagestyle{plain} % Put headers and footers in dynamic frames \makedfheaderfooter \newlength{\xoffset} \computerightedgeodd{\xoffset} \addtolength{\xoffset}{-2cm} \newlength{\yoffset} \computebottomedge{\yoffset} \newcommand{\footstyle}[1]{\bfseries\LARGE #1} % pages is initially set to none, as I don't want the footer to % appear on the title page. \setdynamicframe*{footer}{oddx=\xoffset,y=\yoffset,width=2cm,height=2cm, backcolor=blue,textcolor=white,style=footstyle,pages=none} % now work out the x offset for the even pages \computeleftedgeeven{\xoffset} \setdynamicframe*{footer}{evenx=\xoffset} % Now create some frames for the index, and modify % theindex environment % These are for the odd pages \twocolumninarea[none]{0.6\textwidth}{\textheight}{0pt}{0pt} % Give a label to the last 2 flow frames: \newcounter{N} \newcounter{I} \setcounter{N}{\value{maxflow}} \addtocounter{N}{-2} \whiledo{\value{N}<\value{maxflow}}{% \stepcounter{N}\stepcounter{I} \setflowframe{\value{N}}{label=oddcol\theI}} % These are for the even pages \twocolumninarea[none]{0.6\textwidth}{\textheight}{0.4\textwidth}{0pt} % Give a label to the last 2 flow frames: \setcounter{I}{0} \setcounter{N}{\value{maxflow}} \addtocounter{N}{-2} \whiledo{\value{N}<\value{maxflow}}{% \stepcounter{N}\stepcounter{I} \setflowframe{\value{N}}{label=evencol\theI}} \makeatletter \renewenvironment{theindex}{% \setflowframe*{oddcol1,oddcol2}{pages=odd} \setflowframe*{evencol1,evencol2}{pages=even} \clearpage \mbox{}\framebreak \setflowframe*{main}{pages=none} \setdynamiccontents*{chaphead}{\DFschapterstyle{\indexname}} \addcontentsline{toc}{chapter}{\indexname} \setlength{\parindent}{0pt}% \setlength{\parskip}{0pt plus .3pt}% \let\item\@idxitem}{% \afterpage{% \setflowframe*{main}{pages=all}% \setflowframe{>1}{pages=none}% } \finishthispage } \makeatother \begin{document} % swap frames around for title page \ffswapoddeven*{main} \dfswapoddeven*{chaphead} \title{Creating Flow Frames for Posters, Brochures or Magazines using flowfram.sty v 1.07} \author{Nicola L. C. Talbot} \date{9th March 2007} \pagenumbering{alph} \maketitle %suppress the background \setstaticframe*{backleft}{pages=none} \setstaticframe*{backright}{pages=none} \noindent Dr Nicola Talbot\\ School of Computing Sciences\\ University of East Anglia\\ Norwich. Norfolk. NR4 7TJ.\\ United Kingdom\\ \url{http://theoval.cmp.uea.ac.uk/~nlct/} \frontmatter % swap frames back again \ffswapoddeven*{main} \dfswapoddeven*{chaphead} \tableofcontents \thumbtabindex %\tocandthumbtabindex % not enough room for this % make the footers appear from this point on \setdynamicframe*{footer}{pages=all} \clearpage \mainmatter \chapter{Introduction} \enablethumbtabs \pagenumbering{arabic} The \sty{flowfram} package is a \LaTeXe\ package designed to enable you to create text \gls{frame}s in a document such that the contents of the \env{document} environment flow from one \gls{frame} to the next in the order that they were defined. This is useful for creating posters or magazines or any other form of document that does not conform to the standard one or two column layout. The \sty{flowfram} package provides three types of \gls{frame}: \gls{flow}s, \gls{static}s and \gls{dynamic}s with dimensions and positions specified by the user\footnote{Can I have arbitrary shaped frames? See \autoref{sec:parshape}}. The main contents of the document environment flow from one \gls{flow} to the next in the order of definition, whereas the contents of the static and dynamic frames are set explicitly using commands described in \autoref{sec:modattr}. Note that unless otherwise stated, all co-ordinates are relative to the bottom left hand corner of the \gls{typeblock}. If you have a two-sided document, the absolute position of the \gls{typeblock} may vary depending on the values of \cmdname{oddsidemargin} and \cmdname{evensidemargin}, and all the \gls{frame}s will shift accordingly unless otherwise indicated. Since floats (such as figures and tables) can only go in \gls{flow}s, this package provides the additional environments: \env{staticfigure} and \env{statictable} which can be used in \gls{static}s and \gls{dynamic}s. Unlike their \env{figure} and \env{table} counterparts, they are fixed in place, and so do not take an optional placement specifier. The \cmdname{caption} and \cmdname{label} commands can be used within \env{staticfigure} and \env{statictable} as usual, but it is recommended that you \cmdname{protect} the \cmdname{label} command, otherwise the label may end up being multiply defined. The standard \env{figure} and \env{table} commands will behave as usual in the \gls{flow}s, but their starred versions, \env{figure*} and \env{table*} behave no differently from \env{figure} and \env{table}\footnote{This is because of the arbitrary layout of the flow frames.}. This package has only been tested with a limited number of class files and packages. Since it modifies the output routine, it is likely to conflict with any other package which also does this. You should load \sty{flowfram} \emph{after} \sty{hyperref} and any colour package (e.g.\ \sty{color}). \section{Draft Option} The \sty{flowfram} package has the package option \texttt{draft} which will draw the \gls{bbox}es for each \gls{frame} defined. At the bottom right of each \gls{bbox} (except for the \gls{bbox} denoting the \gls{typeblock}), a marker will be shown in the form: [\meta{T}:\meta{idn};\meta{idl}], where \meta{T} is a single letter denoting the \gls{frame} type, \meta{idn} is the \IDN\ for the \gls{frame} and \meta{idl} is the \IDL\ for that \gls{frame}. Values of \meta{T} are: \texttt{F} (\gls{flow}), \texttt{S} (\gls{static}) or \texttt{D} (\gls{dynamic}). Markers of the form: [M:\meta{idn}] indicate that the \gls{bbox} is the area taken up by the margin for \gls{flow} with \IDN\ \meta{idn}. Note that even if a \gls{frame} has been rotated, the \gls{bbox} will not be rotated. If you want to show or hide specific types of bounding boxes, you can use one of the following commands: \begin{itemize} \item \cmdname{showtypeblocktrue} Display the \gls{bbox} for the \gls{typeblock}. \item \cmdname{showtypeblockfalse} Do not display the \gls{bbox} for the \gls{typeblock}. \item \cmdname{showmarginstrue} Display the \gls{bbox} for the margins. \item \cmdname{showmarginsfalse} Do not display the \gls{bbox} for the margins. \item \cmdname{showframebboxtrue} Display the \gls{bbox} for the \gls{frame}s. \item \cmdname{showframebboxfalse} Do not display the \gls{bbox} for the \gls{frame}s. \end{itemize} You can see the layout for the current page (irrespective of whether or not the \texttt{draft} option has been set) using the command: \cmdname{flowframeshowlayout} The \sty{flowfram} package also has the options \pkgopt{nocolor} and \pkgopt{norotate} for previewers that can not process colour or rotating specials. (Otherwise you may end up with large black rectangles obscuring your text, instead of the pale background colour you were hoping for.) \section{Frame Stacking Order} \label{sec:stacking} The material on each page is placed in the following order: \begin{enumerate} \item Each \gls{static} defined for that page in ascending order of \IDN. \item Each \gls{flow} defined for that page in ascending order of \IDN. \item Each \gls{dynamic} defined for that page in ascending order of \IDN. \item \useGlosentry{bbox}{Bounding boxes} if the \texttt{draft} package option has been used. \end{enumerate} This ordering can be used to determine if you want something to overlay or underlay everything else on the page. Note that the \gls{frame}s do not interact with each other. If you have two or more overlapping frames, the text in each \gls{frame} will not attempt to wrap around the other frames, but will simply overwrite them.\footnote{Can I have arbitrary shaped frames? See \autoref{sec:parshape}.} \chapter{Defining New Frames} \section{Flow Frames} The \gls{flow} is the principle type of \gls{frame}. The text of the \env{document} environment will flow from one \gls{frame} to the next in order of definition. Each \gls{flow} has an associated width, height, position on the page, and optionally a border. To define a new \gls{flow} use:\\[10pt] \cmdname{newflowframe}\verb/[/\meta{page list}\verb+]{+% \meta{width}\verb/}{/% \meta{height}\verb/}{/% \meta{x}\verb/}{/% \meta{y}\verb/}[/% \meta{label}\verb/]/\\[10pt] where \meta{width} is the width of the \gls{frame}, \meta{height} is the height of the \gls{frame}, (\meta{x},\meta{y}) is the position of the bottom left hand corner of the \gls{frame} relative to the bottom left hand corner of the \gls{typeblock}\footnote{See \autoref{itm:absval} on page~\pageref{itm:absval} if you want to convert from absolute page co-ordinates to co-ordinates relative to the typeblock}. The first optional argument, \meta{page list}, indicates the list of pages for which this \gls{frame} is defined. A \gls{pglist} can either be specified by the keywords: \texttt{all}, \texttt{odd}, \texttt{even} or \texttt{none}, or by a comma-separated list of either individual page numbers or \useGlosentry{pgrange}{page ranges}. If \meta{page list} is omitted, \texttt{all} is assumed. A \gls{pgrange} can be a closed range (e.g.\ \verb+2-8+) or an open range (e.g.\ \verb+<10+ or \verb/>5/). For example: \verb'<3,5,7-11,>15' indicates pages 1, 2, 5, 7, 8, 9, 10, 11 and all pages greater than page 15. These page numbers refer to the value of the page counter\footnote{why can't I use the page number format? See item~\ref{itm:whynot} on page~\pageref{itm:whynot}}, so if you have a page~i and a page~1, they will both have the same layout (unless you change the page range setting somewhere between the two pages). Each \gls{frame} has its own unique \IDN, corresponding to the order in which it was defined. So the first \gls{flow} to be defined has the \IDN~1, the second has \IDN~2, and so on. This number can then be used to identify the \gls{frame} when you want to modify its settings. Alternatively, you can assign a unique \IDL\ to the \gls{frame} using the final optional argument \meta{label}. By default, the \gls{flow} will not have a border, but the starred form, \cmdname{newflowframe*}, will place a plain border around the \gls{flow}. Note that if the document continues beyond the last defined \gls{flow} (for example, the \gls{flow}s have only been defined on pages~1 to~10, but the document contains 11 pages) then a single \gls{flow} will be defined, emulating one column mode for all subsequent pages. In this document, I have used the command \begin{verbatim} \newflowframe{0.6\textwidth}{\textheight}{0pt}{0pt}[main] \end{verbatim} to define the main \gls{flow}\footnote{the position for the even pages is set using \cmdname{setflowframe} defined in \autoref{sec:modattr}} (i.e.\ this one.) \subsection{Prematurely Ending a Flow Frame} \label{sec:framebreak} You can force text to move immediately to the next defined \gls{flow} using one of the commands: \cmdname{newpage}, \cmdname{pagebreak} or \cmdname{framebreak}. The first two work in an analogous way to the way they work in standard two column mode. The latter, \cmdname{framebreak}, is required when a paragraph spans two \useGlosentry{flow}{flow frames} of different widths, as \TeX's output routine does not adjust to the new value of \cmdname{hsize} until the last paragraph of the previous \gls{frame} has ended. As a result, the end of the paragraph at the beginning of the new \gls{flow} retains the width of the previous \gls{flow}. If you want to start a new page, rather than simply move to the next \gls{frame}, use the command \cmdname{finishthispage} or \cmdname{clearpage}, or for two-sided documents, to start on the next odd page do \cmdname{cleardoublepage}. \section{Static Frames} A \gls{static} is a rectangular area in which text neither flows into, nor flows out of\footnote{By ``neither flows into nor flows out of'' I mean you have to explicitly set the contents of this frame. Note that it may appear to contain text if another frame overlaps it, but this text belongs to the other frame.}. The contents must be set explicitly, and once set, the contents of the \gls{static} will remain the same on each page until it is explicitly changed. Thus, a \gls{static} can be used, for example, to make a company logo appear in the same place on every page. As from version 1.03 it is now possible to have \gls{static}s with non-rectangular contents, see \autoref{sec:parshape} for further details. A new \gls{static} is defined using the command:\\[10pt] \cmdname{newstaticframe}\verb/[/\meta{page list}\verb+]{+% \meta{width}\verb/}{/% \meta{height}\verb/}{/% \meta{x}\verb/}{/% \meta{y}\verb/}[/% \meta{label}\verb/]/\\[10pt] where, as with \cmdname{newflowframe}, \meta{width} is the width of the \gls{static}, \meta{height} is the height of the \gls{static}, (\meta{x},\meta{y}) is the position of the bottom left hand corner of the \gls{static} relative to the bottom left hand corner of the \gls{typeblock}. The first optional argument, \meta{page list}, indicates the \gls{pglist} for which this \gls{static} should appear, and the final optional argument, \meta{label} is a unique textual \IDL\ which you can use to identify this \gls{static}. If no label is specified, you can refer to this \gls{static} by its unique \IDN. The first \gls{static} defined has \IDN~1, the second has \IDN~2, and so on. As with \cmdname{newflowframe}, there is a starred version \cmdname{newstaticframe*} which will place a border around that \gls{static}. To set the contents of a particular \gls{static}, you can either use the \env{staticcontents} environment:\\[10pt] \verb/\begin{staticcontents}{/\meta{IDN}\verb+}+\\ \meta{contents}\\ \verb/\end{staticcontents}/\\[10pt] where \meta{IDN} is the unique \IDN\ associated with that \gls{static} and \meta{contents} is the contents of the \gls{static}, or you can use the command:\\[10pt] \cmdname{setstaticcontents}\verb/{/\meta{IDN}\verb+}{+\meta{contents}\verb!}!\\[10pt] which will do the same thing. There are starred versions available for both the environment and the command to enable you to identify the \gls{static} by its associated \IDL\ rather than its \IDN :\\[10pt] \verb/\begin{staticcontents*}{/\meta{IDL}\verb+}+\\ \meta{contents}\\ \verb/\end{staticcontents*}/\\[10pt] or the equivalent:\\[10pt] \cmdname{setstaticcontents*}\verb/{/\meta{IDL}\verb+}{+\meta{contents}\verb!}! \section{Dynamic Frames} A \gls{dynamic} is similar to a \gls{static}, but its contents are re-typeset on each page. (A \gls{static} stores its contents in a savebox, whereas a \gls{dynamic} stores its contents in a macro). As from version 1.03 it is now possible to have \gls{dynamic}s with non-rectangular contents, see \autoref{sec:parshape} for further details. To create a new \gls{dynamic}, use the command:\\[10pt] \cmdname{newdynamicframe}\verb/[/\meta{page list}\verb+]{+% \meta{width}\verb/}{/% \meta{height}\verb/}{/% \meta{x}\verb/}{/% \meta{y}\verb/}[/% \meta{label}\verb/]/\\[10pt] The parameters are exactly the same as for \cmdname{newflowframe} and \cmdname{newstaticframe}. Again, each \gls{dynamic} has an associated unique \IDN, starting from 1 for the first \gls{dynamic} defined, and a unique \IDL\ can also be set using the final optional argument \meta{label}. As with the other \gls{frame} types, there is also a starred version \cmdname{newdynamicframe*} which will place a plain border around the \gls{dynamic}. For example, in this document I have used the command \begin{verbatim} \newdynamicframe{0.38\textwidth}{\textheight}{0.62\textwidth}{0pt}[chaphead] \end{verbatim} which has created the \gls{frame} on the right on odd pages, and on the left on even pages (the position for the even pages is set using \cmdname{setdynamicframe} defined in \autoref{sec:modattr}). The contents of a \gls{dynamic} are set using the command:\\[10pt] \cmdname{setdynamiccontents}\verb/{/\meta{id}\verb+}{+\meta{contents}\verb'}'\\[10pt] where \meta{id} is the unique \IDN\ associated with that \gls{dynamic}, and \meta{contents} is the contents of the \gls{dynamic}. Alternatively, if you have assigned an \IDL, \meta{label}, to the \gls{dynamic}, you can use the starred version:\\[10pt] \cmdname{setdynamiccontents*}\verb/{/\meta{label}\verb+}{+\meta{contents}\verb'}'\\[10pt] There is no environment equivalent. You can additionally append text to a \gls{dynamic} using either:\\[10pt] \cmdname{appenddynamiccontents}\verb/{/\meta{id}\verb+}{+\meta{contents}\verb'}'\\[10pt] or:\\[10pt] \cmdname{appenddynamiccontents*}\verb/{/\meta{label}\verb+}{+\meta{contents}\verb'}'\\[10pt] You can make the chapter titles (if \cmdname{chapter} is defined) appear in a dynamic frame using the command \cmdname{dfchaphead}\verb"{"\meta{IDN}\verb"}" where \meta{IDN} is the \IDN\ of the dynamic frame. There is also a starred version of this command if you want to use the \IDL\ instead of the \IDN. For example, in this document, I used the command: \begin{verbatim} \dfchaphead*{chaphead} \end{verbatim} The headers and footers can be turned into \gls{dynamic}s using the command \cmdname{makedfheaderfooter}. This will create two \gls{dynamic}s with \IDL{}s \texttt{header} and \texttt{footer}. The page style will be used as usual, but you can then move or resize the header and footer using \cmdname{setdynamicframe} (described next). \section{Determining the Location of the Typeblock} \label{sec:typeblockloc} As mentioned above, when you create new \useGlosentry{frame}{frames}, you must specify their location relative to the \gls{typeblock}, but what if you want to position a \gls{frame} a set distance from the edge of the paper? The \sty{flowfram} package provides the following commands that compute the distance from the \gls{typeblock} to the paper boundary: \begin{itemize} \item \cmdname{computeleftedgeodd}\verb"{"\meta{length}\verb"}" Compute the position of the left edge of the (odd) page, relative to the left side of the \gls{typeblock}, and store the result in \cmdname{length}. \item \cmdname{computeleftedgeeven}\verb"{"\meta{length}\verb"}" As above, but for even pages. \item \cmdname{computetopedge}\verb"{"\meta{length}\verb"}" Compute the top edge of the page, relative to the bottom of the \gls{typeblock}, and store the result in \meta{length}. \item \cmdname{computebottomedge}\verb"{"\meta{length}\verb"}" Compute the bottom edge of the page, relative to the bottom of the \gls{typeblock}, and store the result in \meta{length} \item \cmdname{computerightedgeodd}\verb"{"\meta{length}\verb"}" Compute the position of the right edge of the (odd) page, relative to the left side of the \gls{typeblock}, and store the result in \cmdname{length}. \item \cmdname{computerightedgeeven}\verb"{"\meta{length}\verb"}" As above, but for even pages. \end{itemize} Note that in all cases, \meta{length} should be a \LaTeX\ length command. For example, if you want to create a frame whose bottom left corner is one inch from the left edge of the page and half an inch from the bottom edge of the page (this assumes odd and even pages have the same margins): \begin{verbatim} % define two new lengths to represent the x and y coords \newlength{\myX} \newlength{\myY} % compute the distance from the typeblock to the paper edge \computeleftedgeodd{\myX} \computebottomedge{\myY} % Add the absolute co-ordinates to get co-ordinates % relative to the typeblock \addtolength{\myX}{1in} \addtolength{\myY}{0.5in} \end{verbatim} \chapter{Modifying Frame Attributes} \label{sec:modattr} Once you have defined the \useGlosentry{flow}{flow frames}, \useGlosentry{static}{static frames} and \useGlosentry{dynamic}{dynamic frames}, their attributes can be changed. The three types of \gls{frame} mostly have the same set of attributes, but some are specific to a certain type. \\[10pt] \useGlosentry{flow}{Flow frame} attributes are modified using either the command:\\[10pt] \cmdname{setflowframe}\verb/{/\meta{idn list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the starred version:\\[10pt] \cmdname{setflowframe*}\verb/{/\meta{label list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the attributes for all \useGlosentry{flow}{flow frames} can be set using:\\[10pt] \cmdname{setallflowframes}\verb+{+\meta{key-val list}\verb!}! \\[10pt] \useGlosentry{static}{Static frame} attributes are modified using either the command:\\[10pt] \cmdname{setstaticframe}\verb/{/\meta{idn list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the starred version:\\[10pt] \cmdname{setstaticframe*}\verb/{/\meta{label list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the attributes for all \useGlosentry{static}{static frames} can be set using:\\[10pt] \cmdname{setallstaticframes}\verb+{+\meta{key-val list}\verb!}! \\[10pt] \useGlosentry{dynamic}{Dynamic frame} attributes are modified using either the command:\\[10pt] \cmdname{setdynamicframe}\verb/{/\meta{idn list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the starred version:\\[10pt] \cmdname{setdynamicframe*}\verb/{/\meta{label list}\verb+}{+\meta{key-val list}\verb!}!\\[10pt] or the attributes for all \useGlosentry{dynamic}{dynamic frames} can be set using:\\[10pt] \cmdname{setalldynamicframes}\verb+{+\meta{key-val list}\verb!}! \\[10pt] In each of the above, \meta{idn list} can either be one of the keywords: \texttt{all}, \texttt{odd} or \texttt{even} (indicating all \useGlosentry{frame}{frames} of that type, \useGlosentry{frame}{frames} of that type whose \IDN\ is odd or \useGlosentry{frame}{frames} of that type whose \IDN\ is even), or it can be a comma-separated list of ID numbers, or \IDN\ ranges. For the starred versions, \meta{label list} should be a comma-separated list of \IDL{}s. Note that you can not use the above keywords, or have ranges with the starred versions. The \meta{key-val list} argument must be a comma-separated list of \meta{key}=\meta{value} pairs, indicating which attributes to modify. The available values are as follows: \begin{description} \item[\key{width}=\meta{length}] The width of the \gls{frame}. \item[\key{height}=\meta{length}] The height of the \gls{frame}. \item[\key{x}=\meta{length}] The x-coordinate of the \gls{frame} for all pages on which it is defined. \item[\key{y}=\meta{length}] The y-coordinate of the \gls{frame} for all pages on which it is defined. \item[\key{evenx}=\meta{length}] The x-coordinate of the \gls{frame} for all even pages on which it is defined, but only if the document is a two-sided document. For example, in this document, I have used the commands \begin{verbatim} \setflowframe*{main}{evenx=0.4\textwidth} \setdynamicframe*{chaphead}{evenx=0pt} \end{verbatim} to switch the positions of the \gls{flow} and \gls{dynamic} containing the document text and chapter headings, respectively, on even pages. You can swap the odd and even values using the commands: \cmdname{ffswapoddeven}\verb"{"\meta{IDN}\verb"}" (for \gls{flow}s) \cmdname{sfswapoddeven}\verb"{"\meta{IDN}\verb"}" (for \gls{static}s) or \cmdname{dfswapoddeven}\verb"{"\meta{IDN}\verb"}". These commands all have starred versions which take the frame's \IDL\ instead of its \IDN. \item[\key{eveny}=\meta{length}] The y-coordinate of the \gls{frame} for all even pages on which it is defined, but only if the document is a two-sided document. \item[\key{oddx}=\meta{length}] The x-coordinate of the \gls{frame} for all odd pages on which it is defined, if the document is two-sided. \item[\key{oddy}=\meta{length}] The y-coordinate of the \gls{frame} for all odd pages on which it is defined, if the document is two-sided. \item[\key{valign}=\meta{pos}] Change the vertical alignment of material inside a \staticordynamic. The value \meta{pos} may be one of: \texttt{c}, \texttt{t} or \texttt{b}. The default for \gls{static}s is \texttt{c}, the default for \gls{dynamic}s is \texttt{t}. This key is not available for \gls{flow}s. \item[\key{label}=\meta{text}] Assign an IDL to the \gls{frame}. (If you do not specify a label when you first define a \gls{frame} it will be given a label identical to its \IDN.) This key is provided to allow the user to label frames that have been generated by certain predefined layout commands described in \autoref{sec:layouts}. \item[\key{border}=\meta{style}] The style of the border around the \gls{frame}, this can take the values: \texttt{none} (no border), \texttt{plain} (plain border) or the name of a \LaTeX\ \gls{fcmd} without the preceding backslash. (I admit the notation is a little confusing, a \gls{fcmd} is a command that places some kind of border around its argument, such as \cmdname{fbox}, or if you are using the \sty{fancybox} package: \cmdname{doublebox}, \cmdname{ovalbox}, \cmdname{Ovalbox} and \cmdname{shadowbox}.) The value \texttt{fbox} is equivalent to \texttt{plain}. For example, to make the first \gls{static} have an oval border: \begin{verbatim} \setstaticframe{1}{border=ovalbox} \end{verbatim} Or you can define your own border: \begin{verbatim} \newcommand{\greenyellowbox}[1]{\fcolorbox{green}{yellow}{#1}} \setstaticframe{1}{border=greenyellowbox} \end{verbatim} \item[\key{offset}=\meta{offset}] The border offset, if it is a user-defined border. This is the distance from the outer edge of the left hand border to the left edge of the \gls{bbox} of the text inside the border. The \sty{flowfram} package is able to compute the border for the following known \gls{fcmd}s: \cmdname{fbox}, \cmdname{ovalbox}, \cmdname{Ovalbox}, \cmdname{doublebox} and \cmdname{shadowbox}. For all other borders, the offset is assumed to be $-$\cmdname{flowframesep}$-$\cmdname{flowframerule}. If you define your own \useGlosentry{fcmd}{frame} \useGlosentry{fcmd}{making} \useGlosentry{fcmd}{command}, you may need to specify the offset explicitly, or the flow/static/dynamic frames may end up shifted to the right or left. The above two examples can compute their own offsets, however, if you were to do, for example: \begin{verbatim} \newcommand{\thickgreenyellowbox}[1]{% {\setlength{\fboxsep}{5pt}\setlength{\fboxrule}{6pt}% \fcolorbox{green}{yellow}{#1}}} \end{verbatim} Then you would have to specify the offset. In this example, the offset is $-5\mathrm{pt}-\mathrm{6pt}=-11\mathrm{pt}$, so you would need to do: \begin{verbatim} \setstaticframe{1}{border=thickgreenyellowbox,offset=-11pt} \end{verbatim} \item[\key{bordercolor}=\meta{colour}] The colour of the border if you are using a standard \gls{fcmd}. The colour can either be specified as, e.g.\ \texttt{green}, or including the colour model, e.g. \verb/[rgb]{0,1,0}/. For example: \begin{verbatim} \setallflowframes{border=doublebox,bordercolor=[rgb]{1,0,0.5}} \end{verbatim} \item[\key{textcolor}=\meta{colour}] The text colour for that \gls{frame}. Again, the colour can either be specified as, e.g.\ \texttt{green}, or including the colour model, e.g. \verb/[rgb]{0,1,0}/. \item[\key{backcolor}=\meta{colour}] The background colour for that \gls{frame}. Again, the colour can either be specified as, e.g.\ \texttt{green}, or including the colour model, e.g. \verb/[rgb]{0,1,0}/. Note that the background colour only extends as far as the \gls{bbox}, not the border. If you want it to extend as far as the border, you will need to define your own border type (see above). \item[\key{pages}=\meta{page list}] The \useGlosentry{pglist}{list of pages} for which the \gls{frame} should appear. This can either have the values: \texttt{all}, \texttt{even}, \texttt{odd} or \texttt{none} (the latter removes the \gls{frame} from that point on---useful if you have multiple pages with the same number), or it can be a comma-separated list of single pages, or \useGlosentry{pgrange}{page ranges}. For example: \begin{verbatim} \setdynamicframe{1}{pages=1,5,8-10} \end{verbatim} \item[\key{margin}=\meta{side}] The side of the \gls{flow} that its corresponding margin should go on. This can take the values \texttt{left}, \texttt{right}, \texttt{inner} or \texttt{outer}. This setting is only available for \gls{flow}s. \item[\key{clear}=\meta{boolean}] If this value is set, the static or dynamic frame will be cleared at the start of the next page, otherwise it will only be cleared on the next occurrence of \cmdname{setstaticcontents} or the \env{staticcontents} environment, or the \cmdname{setdynamiccontents}, depending on the frame type. This value is not set by default. This setting is not available for \gls{flow}s. For example, to prevent the chapter heading reappearing on every page, I have used the command: \begin{verbatim} \setdynamicframe*{chaphead}{clear} \end{verbatim} \item[\key{style}=\meta{cmd}] This should be the name of a command \emph{without} the preceding backslash, to be applied to the contents of the specified \gls{dynamic}. The command may either be a declaration, for example: \begin{verbatim} \setalldynamicframes{style=large} \end{verbatim} which will set the contents of all the dynamic frames in a large font, or it can be a command that takes a single argument, for example: \begin{verbatim} \setalldynamicframes{style=textbf} \end{verbatim} which will make the text for all the dynamic frames come out in bold. To unset a style, do \verb/style=none/. This setting is only available for \gls{dynamic}s. \item[\key{angle}=\meta{n}] Rotate the contents of the \gls{frame} by \meta{n} degrees (new to version 1.02). Note that the \gls{bbox}es will not appear rotated. \item[\key{shape}=\meta{shape command}] Define a shape for the contents of a \gls{static} or \gls{dynamic} (new to version 1.03). If \meta{specs} is \cmdname{relax}, it will be a standard rectangle. See \autoref{sec:parshape} for further details. \end{description} \section{Non-Rectangular Frames} \label{sec:parshape} As from version 1.03, it is now possible to specify non-rectangular \staticordynamic{}s (but not \gls{flow}s). Note that the \gls{bbox} will still appear as a rectangle despite the \gls{frame}'s shape setting. You may use either \TeX's \cmdname{parshape} command, or the \cmdname{shapepar} command defined in Donald~Arseneau's \sty{shapepar} package (if using \cmdname{shapepar}, remember to include the \sty{shapepar} package.) Note that it is better to use \cmdname{parshape} instead of \cmdname{shapepar} as the latter is more restrictive and requires more processing. \begin{description} \item[\cmdname{parshape}] With \cmdname{parshape} you can not have cut-outs in the middle, top or bottom of a frame, however it is possible to have cut-outs in the left or right side of the \gls{frame}. When used with the \key{shape} key for \staticordynamic{}s, the effects of \cmdname{par} and the sectioning commands are modified to allow the paragraph shape to extend beyond a single paragraph, and to allow sectioning commands (but not \cmdname{chapter} or \cmdname{part}). \item[\cmdname{shapepar}] With \cmdname{shapepar} you may have cut-outs, but you may not have any sectioning commands, paragraph breaks, vertical spacing or mathematics. You can simulate a paragraph break using \cmdname{simpar}, but this is not recommended. The size of the shape depends on the amount of text, so the shape will expand or contract as you add or delete text. See the \sty{shapepar} documentation for more details. \end{description} To restore a \gls{frame} to its default rectangular setting use \key{shape}=\cmdname{relax}. For those unfamiliar with \TeX's \cmdname{parshape} command, the syntax is as follows:\\[10pt] \cmdname{parshape}=$n$ $i_1$ $l_1$ $i_2$ $l_2$ \ldots\ $i_n$ $l_n$\\[10pt] where $n$ is the number of ($i_j$ $l_j$) pairs and $i_j$ specifies the left indentation for the $j$th line and $l_j$ specifies the length of the $j$th line. The \gls{static} on the top left was assigned a zigzag shape using: \setstaticframe*{shapedb,shapedt}{pages=all} \begin{verbatim} \setstaticframe*{shapedb}{shape={\parshape=20 0.6\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.1\linewidth 0.4\linewidth 0pt 0.4\linewidth 0.1\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.6\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.1\linewidth 0.4\linewidth 0pt 0.4\linewidth 0.1\linewidth 0.4\linewidth }} \end{verbatim} \setstaticframe*{shapedt}{shape={\parshape=20 0.6\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.1\linewidth 0.4\linewidth 0pt 0.4\linewidth 0.1\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.6\linewidth 0.4\linewidth 0.5\linewidth 0.4\linewidth 0.4\linewidth 0.4\linewidth 0.3\linewidth 0.4\linewidth 0.2\linewidth 0.4\linewidth 0.1\linewidth 0.4\linewidth 0pt 0.4\linewidth 0.1\linewidth 0.4\linewidth }} \begin{staticcontents*}{shapedt} This is an example of a static frame with a non-rectangular shape. This zigzag shape was specified using the \key{shape} key setting in \cmdname{setstaticframe}. The \cmdname{parshape} command was used to set the shape. Using the \key{shape} key rather than explicitly using \cmdname{parshape} within the \env{staticcontents} environment means that I can have paragraph breaks, sectioning commands, and even some mathematics \begin{equation} E=mc^2 \end{equation} whilst retaining the shape. \end{staticcontents*} The syntax for \cmdname{shapepar} is more complicated, see the \sty{shapepar} documentation for more details. In general:\\[10pt] \cmdname{shapepar}\{\meta{shape specs}\}\\[10pt] The \sty{shapepar} package has four predefined shapes: \cmdname{squareshape}, \cmdname{diamondshape}, \cmdname{heartshape} and \cmdname{nutshape}. The \gls{static} on the bottom left was assigned a heart shape using the command: \begin{verbatim} \setstaticframe*{shapedb}{shape={\shapepar\heartshape}} \end{verbatim} To reset the frame back to its original rectangular shape do: \begin{verbatim} \setstaticframe*{shapedb}{shape=\relax} \end{verbatim} \afterpage{\setstaticframe*{shapedt,shapedb}{pages=none}} \setstaticframe*{shapedb}{shape={\shapepar\heartshape}} \begin{staticcontents*}{shapedb} This example has a more complicated shape that can not be generated using \TeX's \cmdname{parshape} command, so \cmdname{shapepar} was used instead. Note that this document must include the \sty{shapepar} package in this instance, whereas no extra packages are required to use \cmdname{parshape}. No mathematics or sectioning commands are allowed here. The shape will expand as more text is added to it. \end{staticcontents*} The \sty{flowfram} package currently does not support any other paragraph shape making commands. Any other commands would have to be used explicitly within the contents of the frame. \chapter{Predefined Layouts} \label{sec:layouts} The \sty{flowfram} package has a number of commands which create \gls{frame}s in a predefined layout. These commands may only be used in the preamble. \section{Column Styles} The standard \LaTeX\ commands \cmdname{onecolumn} and \cmdname{twocolumn} are redefined to create one or two \gls{flow}s that fill the entire \gls{typeblock} separated from each other (in the case of \cmdname{twocolumn}) by a gap of width \cmdname{columnsep}. The height of these \gls{flow}s may not be exactly as high as the \gls{typeblock}, as their height is adjusted to make them an integer multiple of \cmdname{baselineskip}. You can switch off this automatic adjustment using the command: \cmdname{ffvadjustfalse}. The \cmdname{onecolumn} and \cmdname{twocolumn} commands also take an optional argument which is the \gls{pglist} for which those \gls{flow}s are defined. In addition to \cmdname{onecolumn} and \cmdname{twocolumn}, the following commands are also defined: \begin{itemize} \item \cmdname{Ncolumn}\verb"["\meta{pages}\verb"]{"\meta{n}\verb"}" Create \meta{n} column \gls{flow}s each separated by a distance of \cmdname{columnsep}. \item \cmdname{onecolumninarea}\verb"["\meta{pages}\verb"]{"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" This creates a single \gls{flow} to fill the given area, adjusting the height so that it is an integer multiple of \cmdname{baselineskip}. \item \cmdname{twocolumninarea}\verb"["\meta{pages}\verb"]{"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" This creates two column \gls{flow}s separated by a distance of \cmdname{columnsep} filling the entire area specified. \item \cmdname{Ncolumninarea}\verb"["\meta{pages}\verb"]{"\meta{n}\verb"}{"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" A more general form of \cmdname{twocolumninarea} making \meta{n} frames instead of two. \end{itemize} \section{Column Styles with an Additional Frame} As well as the column style of \gls{flow}s defined above, it is also possible to define \meta{n} columns with an additional frame spanning either above or below them. There will be a vertical gap of approximately\footnote{It may not be exact, as the \gls{flow}s are adjusted so that their height is an integer multiple of \cmdname{baselineskip}, which may increase the gap.} \cmdname{vcolumnsep} between the columns and the extra frame. In each of the following definitions, the argument \meta{pages} is the \gls{pglist} for which the \gls{frame}s are defined, \meta{n} is the number of columns required, \meta{type} is the type of frame to go above or below the columns (this may be one of: \texttt{flow}, \texttt{static} or \texttt{dynamic}). The area in which the new frames should fill is defined by \meta{width}, \meta{height} (the width and height of the area) and \meta{x}, \meta{y} (the position of the bottom left hand corner of the area relative to the bottom left hand corner of the \gls{typeblock}.) The height of the additional frame at the top or bottom of the columns is given by \meta{H}. \begin{itemize} \item \cmdname{onecolumntopinarea}\verb"["\meta{pages}\verb"]{"\meta{type}\verb"}{"\meta{H}\verb"}"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" One \gls{flow} with a \meta{type} frame above it, filling the area specified. \item \cmdname{twocolumntopinarea}\verb"["\meta{pages}\verb"]{"\meta{type}\verb"}{"\meta{H}\verb"}"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" Two column style \gls{flow}s with a \meta{type} frame above them, filling the area specified. \item \cmdname{Ncolumntopinarea}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{n}\verb"}{"\meta{H}\verb"}"% \meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"% \meta{y}\verb"}" \meta{n} column style \gls{flow}s with a \meta{type} frame above them, filling the area specified. \item \cmdname{onecolumnbottominarea}\verb"["\meta{pages}\verb"]{"\meta{type}\verb"}{"\meta{H}\verb"}"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" One \gls{flow} with a \meta{type} frame underneath it, filling the area specified. \item \cmdname{twocolumnbottominarea}\verb"["\meta{pages}\verb"]{"\meta{type}\verb"}{"\meta{H}\verb"}"\meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"\meta{y}\verb"}" Two column style \gls{flow}s with a \meta{type} frame below them, filling the area specified. \item \cmdname{Ncolumnbottominarea}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{n}\verb"}{"\meta{H}\verb"}"% \meta{width}\verb"}{"\meta{height}\verb"}{"\meta{x}\verb"}{"% \meta{y}\verb"}" \meta{n} column style \gls{flow}s with a \meta{type} frame below them, filling the area specified. \end{itemize} The following commands are special cases of the above: \begin{itemize} \item \cmdname{onecolumntop}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{H}\verb"}" As \cmdname{onecolumntopinarea} where the area is the entire \gls{typeblock}. \item \cmdname{twocolumntop}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{H}\verb"}" As \cmdname{twocolumntopinarea} where the area is the entire \gls{typeblock}. \item \cmdname{Ncolumntop}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{n}\verb"}{"\meta{H}\verb"}" As \cmdname{Ncolumntopinarea} where the area is the entire \gls{typeblock}. \item \cmdname{onecolumnbottom}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{H}\verb"}" As \cmdname{onecolumnbottominarea} where the area is the entire \gls{typeblock}. \item \cmdname{twocolumnbottom}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{H}\verb"}" As \cmdname{twocolumnbottominarea} where the area is the entire \gls{typeblock}. \item \cmdname{Ncolumnbottom}\verb"["\meta{pages}\verb"]{"% \meta{type}\verb"}{"\meta{n}\verb"}{"\meta{H}\verb"}" As \cmdname{Ncolumnbottominarea} where the area is the entire \gls{typeblock}. \end{itemize} \section{Backdrop Effects} \useGlosentry{static}{Static frames} can be used to produce a backdrop. There are a number of commands which create \gls{static}s that can be used as a backdrop. In the following definitions, \meta{pages} is the \gls{pglist} for which those \gls{static}s are defined (all is the default). For the vertical strips: \meta{xoffset} is the amount by which the frames should be shifted horizontally (0pt by default), \meta{W1} is the width of the first frame, with colour specified by \meta{C1} and \IDL\ \meta{L1}, and so on up to \meta{Wn} the width of the \meta{n}th frame with colour specified by \meta{Cn} and \IDL\ \meta{Ln}. For the vertical strips: \meta{yoffset} is the amount by which the frames should be shifted vertically (0pt by default), \meta{H1} is the height of the first frame, with colour specified by \meta{C1} and \IDL\ \meta{L1}, and so on up to \meta{Hn} the height of the \meta{n}th frame with colour specified by \meta{Cn} and \IDL\ \meta{Ln}. \textbf{NOTE:} unlike the earlier commands, these commands are all relative to the actual page, not the \gls{typeblock}. So an $x$ offset of 0pt indicates the first vertical frame is flush with the left hand edge of the page, and a $y$ offset of 0pt indicates the first horizontal frame is flush with the bottom edge of the page. This is because backdrops tend to span the entire page, not just the \gls{typeblock}. The colour specification must be completely enclosed in braces, e.g.\ \verb"{[rgb]{1,0,1}}" not \verb"[rgb]{1,0,1}". \subsection{Vertical stripe effects} \begin{itemize} \item \cmdname{vtwotone}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{W2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Create a two tone vertical strip effect. (This command was used to create the coloured background on the title page of this document.) \item \cmdname{vNtone}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{n}\verb"}{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\verb"{"\meta{Wn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" Similar to \cmdname{vtwotone} but with \meta{n} \gls{static}s instead of two. \item \cmdname{vtwotonebottom}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{H}\verb"}{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{W2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Similar to \cmdname{vtwotone} but the \gls{static}s are only \meta{H} high, instead of the entire height of the page. The frames are aligned along the bottom edge of the page. \item \cmdname{vtwotonetop}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{H}\verb"}{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{W2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Similar to \cmdname{vtwotone} but the \gls{static}s are only \meta{H} high, instead of the entire height of the page. The frames are aligned along the top edge of the page. (This command was used to create the border effect along the top of every page in this document. Two \cmdname{vtwotonetop} commands were used, one for the even pages, and the other for the odd pages.) \item \cmdname{vNtonebottom}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{H}\verb"}{"\meta{n}\verb"}{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\linebreak \verb"{"\meta{Wn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" More general version of \cmdname{vtwotonebottom} but for \meta{n} frames. \item \cmdname{vNtonetop}\verb"["\meta{pages}\verb"]["\meta{xoffset}\verb"]{"\meta{H}\verb"}{"\meta{n}\verb"}{"\meta{W1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\linebreak \verb"{"\meta{Wn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" More general version of \cmdname{vtwotonetop} but for \meta{n} frames. \end{itemize} \subsection{Horizontal stripe effect} \begin{itemize} \item \cmdname{htwotone}\verb"["\meta{pages}\verb"]["\meta{yoffset}\verb"]{"\meta{H1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{H2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Create a two tone horizontal strip effect. \item \cmdname{hNtone}\verb"["\meta{pages}\verb"]["\meta{yoffset}\verb"]{"\meta{n}\verb"}{"\meta{H1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\linebreak \verb"{"\meta{Hn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" Similar to \cmdname{htwotone} but with \meta{n} \gls{static}s instead of two. \item \cmdname{htwotoneleft}\verb"["\meta{pages}\verb"]["\meta{yoffset}\verb"]{"\meta{W}\verb"}{"\meta{H1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{H2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Similar to \cmdname{htwotone} but the \gls{static}s are only \meta{W} wide, instead of the entire width of the page. The frames are aligned along the left edge of the page. \item \cmdname{htwotoneright}\verb"["\meta{pages}\verb"]["% \meta{yoffset}\verb"]{"\meta{W}\verb"}{"\meta{H1}\verb"}{"% \meta{C1}\verb"}{"\meta{L1}% \verb"}{"\meta{H2}\verb"}{"\meta{C2}\verb"}{"\meta{L2}\verb"}" Similar to \cmdname{htwotone} but the \gls{static}s are only \meta{W} wide, instead of the entire width of the page. The frames are aligned along the right edge of the page. \item \cmdname{hNtoneleft}\verb"["\meta{pages}\verb"]["% \meta{yoffset}\verb"]{"\meta{W}\verb"}{"\meta{n}\verb"}{"% \meta{H1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\linebreak \verb"{"\meta{Hn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" More general version of \cmdname{htwotoneleft} but for \meta{n} frames. \item \cmdname{hNtoneright}\verb"["\meta{pages}\verb"]["% \meta{yoffset}\verb"]{"\meta{W}\verb"}{"\meta{n}\verb"}{"% \meta{H1}\verb"}{"\meta{C1}\verb"}{"\meta{L1}\verb"}"% \ldots\linebreak \verb"{"\meta{Hn}\verb"}{"\meta{Cn}\verb"}{"\meta{Ln}\verb"}" More general version of \cmdname{htwotoneright} but for \meta{n} frames. \end{itemize} \subsection{Background Frame} To make a single \gls{static} covering the entire page, use: \cmdname{makebackgroundframe}\verb"["\meta{pages}\verb"]["\meta{IDL}\verb"]". Note that this \gls{static} should be created before any other \gls{static} as it will obscure all other \gls{static}s created before it if it is given a background colour. \subsection{Vertical and Horizontal Rules} You can create vertical or horizontal rules between two \gls{frame}s using the commands: \begin{itemize} \item \cmdname{insertvrule}\verb"["\meta{y top}\verb"]["% \meta{y bottom}\verb"]{"\meta{T1}\verb"}{"\meta{IDN1}\verb"}{"% \meta{T2}\verb"}{"\meta{IDN2}\verb"}" This creates a new \gls{static} which fits between \meta{T1} \gls{frame} with \IDN\ \meta{IDN1} and \meta{T2} \gls{frame} with \IDN\ \meta{IDN2}, and places a vertical rule in it extending from the highest point of the highest frame to the lowest point of the lowest frame. The first optional argument \meta{y top} (default 0pt) extends the rule by that much above the highest point, and the second optional argument \meta{y bottom} (default 0pt) extends the rule by that much below the lowest point. If either of the optional arguments are negative, the rule will be shortened instead of extended. The width of the rule is given by \cmdname{columnseprule}. \item \cmdname{inserthrule}\verb"["\meta{x left}\verb"]["% \meta{x right}\verb"]{"\meta{T1}\verb"}{"\meta{IDN1}\verb"}{"% \meta{T2}\verb"}{"\meta{IDN2}\verb"}" This creates a new \gls{static} which fits between \meta{T1} \gls{frame} with \IDN\ \meta{IDN1} and \meta{T2} \gls{frame} with \IDN\ \meta{IDN2}, and places a horizontal rule in it extending from the leftmost point of the left frame to the rightmost point of the right frame. The first optional argument \meta{x left} (default 0pt) extends the rule by that much before the leftmost point, and the second optional argument \meta{x right} (default 0pt) extends the rule by that much beyond the rightmost point. If either of the optional arguments are negative, the rule will be shortened instead of extended. The height of the rule is given by \cmdname{columnseprule}. \end{itemize} The default value for \cmdname{columnseprule} is 2pt. Both of the above commands have starred versions which allow you to identify the \gls{frame} by \IDL\ instead of \IDN. The \gls{frame} types, \meta{T1} and \meta{T2} can be one of the following keywords: \texttt{flow}, \texttt{static} or \texttt{dynamic}. \chapter{Thumbtabs and Minitocs} \section{Thumbtabs} On the right hand side of this page, there is a blue rectangle with the chapter number in it. This is a thumbtab, and it gives you a rough idea whereabouts in the document you are when you quickly flick through the pages. Each thumbtab is in fact a dynamic frame, and you can control whether to make the number and/or title appear in the thumbtab by using one or more of the package options: \pkgopt{ttbtitle} (show title---default), \pkgopt{ttbnotitle} (don't show the title), \pkgopt{ttbnum} (show the number) and \pkgopt{ttbnonum} (don't show the number---default). If you want thumbtabs in your document, you need to use the command \begin{center} \cmdname{makethumbtabs}\verb"["\meta{y offset}\verb"]{"\meta{height}\verb"}["\meta{section type}\verb"}" \end{center} in the document preamble. By default, the topmost thumbtab is level with the top of the \gls{typeblock}, but can be shifted vertically using the first optional argument \meta{y offset}. Each thumbtab will be \meta{height} high, and will correspond to the sectioning type \meta{section type}. If \meta{section type} is omitted, chapters will be used if the \cmdname{chapter} command is defined, otherwise sections will be used. The width of the thumbtabs is given by the length \cmdname{thumbtabwidth}, which is 1cm by default. The command \cmdname{thumbtabindex} will display the thumbtab index (all thumbtabs) on the current page. You then need to use the command \cmdname{enablethumbtabs} to start the individual thumbtabs and \cmdname{disablethumbtabs} to make them go away. You can align the table of contents with the thumbtabs\footnote{but only do this if there is enough room on the page!} using the command \cmdname{tocandthumbtabindex} instead of the commands \cmdname{tableofcontents} and \cmdname{thumbtabindex}. If you are using the \sty{hyperref} package, the text on the thumbtab index will be a hyperlink to the corresponding part of the document. Note that you may need to shift the thumbtabs vertically up or down to make sure that they align correctly with the table of contents. The format of the text on the thumbtabs is given by the command \cmdname{thumbtabindexformat} for the thumbtab index entries, and \cmdname{thumbtabformat} for the individual thumbtabs. By default the text on the thumbtabs will be rotated, but as rotating is not implemented by some previewers, the package option \pkgopt{norotate} is provided, which will stack the letters vertically. This does not look as good as the rotated text. In addition, some previewers do not put the hyperlink in the correct place when the link has been rotated, so this may also cause a problem. The thumbtab attributes can be changed using \cmdname{setthumbtab}\verb"{"\meta{n}\verb"}{"\meta{key value list}\verb"}", where \meta{n} is the thumbtab number starting from 1 (for the top thumbtab) to \verb"\value{maxthumbtabs}" (for the bottom thumbtab). Note that these numbers are not related to the \gls{frame} \IDN{}s. To just change the settings for the thumbtab index, use \cmdname{setthumbtabindex}\verb"{"\meta{n}\verb"}{"\meta{key value list}\verb"}". The \meta{key value list} for both these commands is the same as that for \cmdname{setdynamicframe}. By default, the thumbtabs have a grey background. In this document, I have used: \begin{verbatim} \setthumbtab{1}{backcolor=[rgb]{0.15,0.15,1}} \setthumbtab{2}{backcolor=[rgb]{0.2,0.2,1}} \setthumbtab{3}{backcolor=[rgb]{0.25,0.25,1}} \setthumbtab{4}{backcolor=[rgb]{0.3,0.3,1}} \setthumbtab{5}{backcolor=[rgb]{0.35,0.35,1}} \setthumbtab{6}{backcolor=[rgb]{0.4,0.4,1}} \setthumbtab{7}{backcolor=[rgb]{0.45,0.45,1}} \end{verbatim} to change the thumbtab background colour to shades of blue. I have also changed the style of the thumbtab text using: \begin{verbatim} \newcommand{\thumbtabstyle}[1]{\textsc{\sffamily #1}} \setthumbtab{all}{style=thumbtabstyle,textcolor=white} \end{verbatim} Given that I have specified white text, why does the thumbtab index have black text? This is because the text on the thumbtab index is a hyperlink, and I have used \verb"linkcolor=black" with the hyperref package. \section{Minitocs} In this document, after each chapter heading, there is a mini table of contents for that chapter. To enable minitocs, use the command \cmdname{enableminitoc}\verb"["\meta{section type}\verb"]". The default \meta{section type} is the same as the thumbtabs. If you want the minitocs to appear in a \gls{dynamic}, you can use \cmdname{appenddfminitoc}\verb"{"\meta{IDN}\verb"}" where \meta{IDN} is the \IDN\ of the appropriate \gls{dynamic}. There is also a starred version available if you want to use the \IDL\ instead of the \IDN. For example, in this document I have used the command: \begin{verbatim} \appenddfminitoc*{chaphead} \end{verbatim} in the preamble, which has appended the minitocs to the \gls{dynamic} with \IDL\ \texttt{chaphead}. The style of the minitoc text is given by the command \cmdname{minitocstyle} which takes one argument, the contents of the minitoc. This command may be redefined if you want to change the minitoc style. The gap before the minitoc is given by the length \cmdname{beforeminitocskip} and the gap after the minitoc is given by the length \cmdname{afterminitocskip}. These lengths may be changed using \cmdname{setlength}. \chapter{Global Values} The following macros can be changed using \cmdname{renewcommand}: \begin{itemize} \item \cmdname{setffdraftcolor} This sets the colour of the \gls{bbox} when it is displayed in draft mode. The default value is: \verb/\color[gray]{0.8}/. For example, if you want a darker grey, do: \begin{verbatim} \renewcommand{\setffdraftcolor}{\color[gray]{0.3}} \end{verbatim} \item \cmdname{setffdrafttypeblockcolor} This sets the colour of the \gls{bbox} of the \gls{typeblock} when it is displayed in draft mode. The default value is: \verb/\color[gray]{0.9}/. For example, if you want a medium grey, do: \begin{verbatim} \renewcommand{\setffdrafttypeblockcolor}{\color[gray]{0.5}} \end{verbatim} \item \cmdname{fflabelfont} This sets the font size for the \gls{bbox} markers in draft mode. The default value is: \verb/\small\sffamily/. For example, if you want a larger font, do: \begin{verbatim} \renewcommand{\fflabelfont}{\large\sffamily} \end{verbatim} \end{itemize} The following are lengths, which can be changed using \cmdname{setlength}: \begin{itemize} \item \cmdname{fflabelsep} This is the distance from the right hand side of the \gls{bbox} at which to place the \gls{bbox} marker. The default value is: \texttt{1pt} \item \cmdname{flowframesep} This is the gap between the text of the \gls{frame} and its border, for the standard border types. \item \cmdname{flowframerule} This is the width of the \gls{frame}'s border, if using a border given by a \useGlosentry{fcmd}{frame} \useGlosentry{fcmd}{making command} that uses \cmdname{fboxsep} to set its border width (e.g.\ \cmdname{fbox}). \item \cmdname{sdfparindent} This is the paragraph indentation within \staticordynamic{}s. The default value is 0pt. \item \cmdname{vcolumnsep} This is the approximate vertical distance between the top frame and the column frames when using \cmdname{Ncolumnhead} etc. (The height of the \gls{flow} may be adjusted to make it an integer multiple of \cmdname{baselineskip}.) \item \cmdname{columnsep} This is the horizontal distance between the column frames when using \cmdname{Ncolumn} or \cmdname{Ncolumnhead} etc \end{itemize} \chapter{Troubleshooting} \section{General Queries} \begin{enumerate} \item If all my \gls{flow}s are only defined on, say, pages 1-10, what happens if I then add some extra text so that the document exceeds 10 pages? The output routine will create a new \gls{flow} the size of the \gls{typeblock}, and use that. \item Can I use the formatted page number in \gls{pglist}s? No. \item\label{itm:whynot} Why not? When the output routine finishes with one \gls{flow} it looks for the next \gls{flow} defined on that page, if there are none left, it then searches through the \gls{pglist} of all the defined \gls{flow}s to see if the next page lies in that range, if there are none defined on that page, it ships out that page, and tries the next page. This gives rise to two problems: \begin{enumerate} \item \LaTeX\ is not clairvoyant. If it is currently on page 14, and on the next page the page numbering changes to A, it has no way of knowing this until it has reached that point, which it hasn't yet. So it is looking for a \gls{flow} defined on page~15, not on page~A. \item How does \LaTeX\ tell if page C lies between pages A and D? It would require an algorithm that can convert from a formatted number back to an integer. Given that there are many different ways of formatting the value of a counter (besides the standard Roman and alphabetical formats) it would be impossible to write an algorithm to do this for some arbitrary format. \end{enumerate} \item Can I have an arbitrarily shaped \gls{frame}? \label{itm:parshape} You can assign certain irregular shapes to \staticordynamic{}s, using the \key{shape} key (see \autoref{sec:parshape}). Note that the \gls{bbox} will still appear as a rectangle with the dimensions of the given \gls{frame} which may not correspond to the assigned shape. This function is not available for \gls{flow}s. \item Why has the text from my \gls{flow} appeared in a \gls{static} or \gls{dynamic}? Assuming you haven't inadvertently set that text as the contents of the \staticordynamic, the frames are most likely overlapping (see \autoref{sec:stacking}). In an attempt to clarify what's going on, suppose you have defined a \gls{static}, a \gls{dynamic} and two \gls{flow}s. The following is an approximate\footnote{The pedantic may point out that \TeX\ may make several attempts to fill in the flow frames depending on penalties and so on.} analogy: \TeX\ has a sheet of paper on the table, and has pencilled\footnote{actually it hasn't drawn anything really, but it has in its mind's eye.} in a rectangle denoting the \gls{typeblock}. The paper is put to one side for now. \TeX\ also has four rectangular sheets of transparent paper. The first (which I shall call sheet~1) represents the \gls{static}, the next two (which I shall call sheets~2 and~3) represent the \gls{flow}s, and the last one (which I shall call sheet~4) represents the \gls{dynamic}. \TeX\ starts work on filling sheet~2 with the document text. Once it has put as much text on that sheet as it considers possible (according to its views on aesthetics), it puts sheet~2 into the ``in tray'', and then continues on sheet~3. While it's filling in sheets~2 and~3, if it encounters a command or environment that tells it what to put in the \gls{static}, it fills in sheet~1 and then puts sheet~1 into the ``in tray'' and resumes where it left off on sheet~2 or~3. Similarly, if it encounters a command that tells it what to put in the \gls{dynamic}, it stops what it's doing, fills in sheet~4, then puts sheet~4 into the ``in tray'', and resumes where it left off. Only when it has finished sheet~3 (the last \gls{flow} defined on that page), will it gather together all the transparent sheets, and fix them onto the page starting with sheet~1 through to sheet~4, measuring the bottom left hand corner of each transparent sheet relative to the bottom left hand corner of the \gls{typeblock}. \TeX\ will then put that page aside, and start work on the next page. If two or more of the transparent sheets overlap, you will see through the top one into the one below (unless of course the top one has been painted over, either by setting a background colour, or by adding an image that has a non-transparent background.) Note that it's also possible that the overlap is caused by an overfull hbox that's causing the text to poke out the side of the \gls{flow} into a neighbouring \gls{frame}. \item Why do I get lots of overfull hbox messages? Probably because you have narrow \gls{frame}s. \item What happens if I use a command or environment that switches to two-column mode (e.g. \env{theindex})? As from version 1.01, any \cmdname{onecolumn} or \cmdname{twocolumn} commands that occur outside of the preamble will print the contents of the optional argument, and issue a warning. It is recommended that you set up your own frames for use in the index. \item How do I change the vertical alignment of material inside a \staticordynamic? Use the \key{valign} key in \cmdname{setstaticframe} or \cmdname{setdynamicframe} (new to version 1.03). \item\label{itm:absval} How do I compute the distance from the edge of the page instead of the typeblock? See \autoref{sec:typeblockloc}. \end{enumerate} \section{Unexpected Output} \begin{enumerate} \item The lines at the beginning of my \gls{flow}s are the wrong width. This is a problem that will occur if you have \gls{flow}s with different widths, as the change in \cmdname{hsize} does not come into effect until a paragraph break. So if you have a paragraph that spans two \gls{flow}s, the end of the paragraph at the beginning of the second \gls{flow} will retain the width it had at the start of the paragraph at the bottom of the previous \gls{flow}. You can fix the problem by inserting \cmdname{framebreak} at the point where the \gls{frame} break occurs (see \autoref{sec:framebreak}). \item My \gls{frame}s shift to the right when I add a border. This may occur if you use a border that is not recognised by the \sty{flowfram} package. You will need to set the offset using the \texttt{offset} key (see \autoref{sec:modattr}). \item I have a vertical white strip along the right hand side of every page. This can happen if you have, say, an A4 document, and ghostscript has letter as the default paper size. You can change the default paper size by editing the file \verb|gs_init.ps|. Change: \begin{verbatim} % Optionally choose a default paper size other than U.S. letter. % (a4) \end{verbatim} to: \begin{verbatim} % Optionally choose a default paper size other than U.S. letter. (a4) \end{verbatim} \item I don't have any output. All your \gls{flow}s are empty. \TeX\ doesn't put the frames onto the page until it has finished putting text into the \gls{flow}s. So if there is no text to go in the \gls{flow}s it won't output the page. If you only want the \gls{static}s or \gls{dynamic}s filled in, and nothing outside of them, just do \verb|\mbox{}\finishthispage|. This will put an invisible something with zero area into your \gls{flow}, but it's enough to convince \TeX\ that the document contains some text. \item The last page hasn't appeared. See the previous answer. \item There is no paragraph indentation inside my \staticordynamic{}s. The paragraph indentation in \staticordynamic{}s is governed by the length \cmdname{sdfparindent} which is set to 0pt by default. To make the indentation the same as that used by \gls{flow}s place the following in the preamble: \begin{verbatim} \setlength{\sdfparindent}{\parindent} \end{verbatim} \item My section numbering is in the wrong order Remember that the contents of the \gls{dynamic}s are not set until the page is shipped out, and the contents will be set in the order of \IDN, so if you have any sectioning commands occuring within \gls{dynamic}s, they may not be set in the same order as they are in your input file. \item The contents of my \staticordynamic\ have shifted to the left when I used \cmdname{parshape} This will happen if your \cmdname{parshape} specification exceeds the linewidth. For example: \begin{verbatim} \parshape=1 0.4\linewidth 0.7\linewidth \end{verbatim} This specifies a line with overall length \verb"1.1\linewidth" which is too long. \end{enumerate} \section{Error Messages} \begin{enumerate} \item \verb/Illegal unit of measure (pt inserted)/ All lengths must have units. Remember to include the units when defining new \gls{frame}s. The following keys require lengths: \texttt{width}, \texttt{height}, \texttt{x}, \texttt{y} and \texttt{offset}\footnote{% \texttt{offset} can also have the value \texttt{compute}}. \item \verb/Missing number, treated as zero/ \LaTeX\ is expecting a number. There are a number of possible causes: \begin{enumerate} \item You have used an \IDL\ instead of an \IDN. If you want to refer to a frame by its label, you need to remember to use the starred versions of the \verb/\set/\meta{type}\verb/frame/ commands, or when setting the contents of \gls{static}s or \gls{dynamic}s. \item When specifying page lists, you have mixed keywords with page ranges. For example: \texttt{1,even} is invalid. \end{enumerate} \item \verb/Flow frame IDL '/\meta{label}\verb+' already defined+ All \useacronym[s]{IDL} within each \gls{frame} type must be unique. There are similar error messages for duplicate \useacronym[s]{IDL} for \gls{static}s and \gls{dynamic}s. \item \verb/Can't find flow frame id/ You have specified a non-existent \gls{flow} \IDL. There are similar error messages for \gls{static}s and \gls{dynamic}s. Check to make sure you have spelt the label correctly, and check you are using the correct \gls{frame} type command. (For example, if a \gls{static} has the \IDL\ \texttt{mylabel}, and you attempt to do \verb/\setflowframe*{mylabel}{/\meta{options}\verb/}/, then you will get this error, because \texttt{mylabel} refers to a \gls{static} not a \gls{flow}.) \item \verb/Key 'clear' is boolean/ The \texttt{clear} key can only have the values \texttt{true} or \texttt{false}. \item \verb/Key 'clear' not available/ The \texttt{clear} key is only available for \staticordynamic{}s. \item \verb/Key 'style' not available/ The \texttt{style} key is only available for \gls{dynamic}s. \item \verb/Key 'margin' not available/ The \texttt{margin} key is only available for \gls{flow}s. \item \verb/Key 'shape' not available/ The \texttt{shape} key is only available for \staticordynamic{}s. \item \verb/Dynamic frame style '/\meta{style}\verb+' not defined+ The specified style \meta{style} must be the name of a command without the preceding backslash. It is possible that you have mis-spelt the name, or you have forgotten to define the command. \item \verb/Argument of \fbox has an extra }/ This error will occur if you do, say, \verb/border=\fbox/ instead of \verb/border=fbox/. Remember not to include the initial backslash. \item \verb/Not in outer par mode/ You can not have floats (such as figures, tables or marginal notes) in \staticordynamic{}s. If you want a figure or table within a \staticordynamic\ use \env{staticfigure} or \env{statictable}. \item \verb/Somethings wrong---maybe missing \item/ Assuming that all your list type of environments start with \cmdname{item}, this may be caused by something going wrong with the toc (table of contents), ttb (thumbtab) or aux (auxiliary) files in the previous run. Try deleting them, and try again. \end{enumerate} \disablethumbtabs \printglossary \printindex % have a backcover: \setdynamicframe*{footer}{pages=none} \setstaticframe*{lastbackleft,lastbackright}{pages=even} \mbox{}\finishthispage \end{document}