\documentclass{article} \usepackage{censor} \parindent 0in \parskip 1em \begin{document} \vspace*{0in} \begin{center} \LARGE The \textsf{censor} Package\\ \small \rule{0in}{1em}Tools for Producing Redacted Documents\\ \large \rule{0in}{2em} Steven B. Segletes\\ steven.b.segletes.civ@mail.mil\\ \rule{0em}{2em}2013/02/19\\ v3.0 \end{center} \section{Introduction} The \textsf{censor} package allows a convenient redaction/censor capability to be employed, for those who need to protect restricted information, as well as for those who are forced to work in a more inefficient environment when dealing with restricted information. Let us assume you have a document for internal use, containing some restricted (\textit{i.e.}, private, sensitive, proprietary or classified) information. To give a very short (fictitious) example: {\addtolength{\leftskip}{2.3em} RESTRICTED SOURCE: \hrulefill \verb|The Liberty missile, with charge diameter (CD) of 80~mm, |\\ \verb|revealed a penetration capability of 1.30 1.19, and |\\ \verb|1.37~CD in three recent tests into armor steel.| RESTRICTED OUTPUT: \hrulefill The Liberty missile, with charge diameter (CD) of 80~mm, revealed a penetration capability of 1.30 1.19, and 1.37~CD in three recent tests into armor steel. \hrulefill } Censor/redaction capabilities are desirable to sanitize the information. This would accomplish two things: allow for wider distribution of the output and/or allow a less sensitive output to be stored locally with fewer storage controls. There are two modes in which the censor package can be used: (i) when the source (.tex file) remains restricted/secure; and (ii) when the source (.tex file) is public/unsecure. \clearpage \section{Mode I: Restricted/Secure Source (.tex file)} In this mode, you create the source in a restricted/secure environment, but would like to produce output that can be more widely distributed, or stored in a less restricted location. With the addition of \verb|\usepackage{censor}| to your document preamble, the \verb|\censor| command becomes accessible to block out key identifiers: {\addtolength{\leftskip}{2.3em} CENSORED RESTRICTED SOURCE: \hrulefill \verb|The \censor{Liberty} missile, with charge diameter (CD) of|\\ \verb|\censor{80}~mm, revealed a penetration capability of 1.30|\\ \verb|1.19, and 1.37~CD in three recent tests into armor steel.| CENSORED NO-LONGER-RESTRICTED OUTPUT: \hrulefill The \censor{Liberty} missile, with charge diameter (CD) of \censor{80}~mm, revealed a penetration capability of 1.30 1.19, and 1.37~CD in three recent tests into armor steel. \hrulefill } The censored version of the output is (presumably) less sensitive in its content, and my be stored in or distributed to a less sensitive environment (\textit{e.g.}, as a hardcopy). The censored words are not part of the output document (hardcopy or electronic), even though the space allocated for the redaction is identical to the original word being redacted. The document may also be printed out in its restricted (uncensored) form, merely with the addition of the \verb|\StopCensoring| command at the beginning of the document: {\addtolength{\leftskip}{2.3em} UNCENSORED RESTRICTED SOURCE: \hrulefill \verb|\StopCensoring|\\ \verb| |\\ \verb|The \censor{Liberty} missile, with charge diameter (CD) of|\\ \verb|\censor{80}~mm, revealed a penetration capability of 1.30,|\\ \verb|1.19, and 1.37~CD in three recent tests into armor steel.| UNCENSORED RESTRICTED OUTPUT: \hrulefill \StopCensoring The \censor{Liberty} missile, with charge diameter (CD) of \censor{80}~mm, revealed a penetration capability of 1.30, 1.19, and 1.37~CD in three recent tests into armor steel. \hrulefill } As of version 3.0, the ability to censor ``boxed'' objects like images and/or tabular environments is made possible with the \verb|\censorbox| command. As an example, one could use the following source: {\addtolength{\leftskip}{2.3em} UNCENSORED RESTRICTED SOURCE: \hrulefill \verb|The \censor{Liberty} missile, with charge diameter (CD) of|\\ \verb|\censor{80}~mm, revealed a penetration capability into armor|\\ \verb|steel, as detailed in Table 1.|\\ \verb||\\ \verb|\begin{table}[ht]|\\ \verb|\begin{center}|\\ \verb|\textbf{Table 1. \censor{Liberty} Missile Test Data}\\|\\ \verb|\censorbox{%|\\ \verb| \small\begin{tabular}{cc}|\\ \verb| Standoff & Penetration \\|\\ \verb| (CD) & (CD) \\|\\ \verb| \hline|\\ \verb| 5.0 & 1.30 \\|\\ \verb| 6.0 & 1.19 \\|\\ \verb| 6.8 & 1.37\\|\\ \verb| \end{tabular}%|\\ \verb|}|\\ \verb|\end{center}|\\ \verb|\end{table}|\\ \hrulefill } in order to turn, what would otherwise be the following restricted output into a censored, unrestricted table. {\addtolength{\leftskip}{2.3em} UNCENSORED RESTRICTED OUTPUT: \hrulefill The Liberty missile, with charge diameter (CD) of 80~mm, revealed a penetration capability into armor steel, as detailed in Table 1. \begin{table}[ht] \begin{center} \textbf{Table 1. Liberty Missile Test Data}\\ \small\begin{tabular}{cc} Standoff & Penetration \\ (CD) & (CD) \\ \hline 5.0 & 1.30 \\ 6.0 & 1.19 \\ 6.8 & 1.37\\ \end{tabular} \end{center} \end{table} \clearpage CENSORED UNRESTRICTED OUTPUT: \hrulefill The \censor{Liberty} missile, with charge diameter (CD) of \censor{80}~mm, revealed a penetration capability into armor steel, as detailed in Table 1. \begin{table}[ht] \begin{center} \textbf{Table 1. \censor{Liberty} Missile Test Data}\\ \censorbox{% \small\begin{tabular}{cc} Standoff & Penetration \\ (CD) & (CD) \\ \hline 5.0 & 1.30 \\ 6.0 & 1.19 \\ 6.8 & 1.37\\ \end{tabular}% } \end{center} \end{table} \par \hrulefill } Additionally, as of version 2.0, there is provided a block-censor capability, for redacting larger blocks of text. This new command is \verb|\blackout|, and is used in the form \verb|\blackout{Block of text}|. This nice thing about this command is that it can stretch across line boundaries conveniently (and across paragraph boundaries, a little less conveniently). For example, {\addtolength{\leftskip}{2.3em} UNCENSORED RESTRICTED SOURCE: \hrulefill \verb|\blackout{|\\ \verb|The Liberty missile, with charge diameter (CD) of 80~mm,|\\ \verb|revealed a penetration capability of 1.30, 1.19, and 1.37~CD|\\ \verb|in three recent tests into armor steel.}| CENSORED UNRESTRICTED OUTPUT: \hrulefill \blackout{% The Liberty missile, with charge diameter (CD) of 80~mm, revealed a penetration capability of 1.30, 1.19, and 1.37~CD in three recent tests into armor steel.} \hrulefill } There are several caveats regarding the use of \verb|\blackout|. First, its argument cannot, without help, extend across paragraph boundaries. The help needed by \textsf{censor} is to insert the token \verb|\bpar| on your blank lines that would normally constitute paragraph boundaries, as shown in the example below: \verb|\blackout{|\\ \verb|First paragraph to censor.|\\ \verb| \bpar|\\ \verb|Second paragraph to censor.}|\\ \vspace{-0.7em}% will appear as \blackout{ First paragraph to censor. \bpar Second paragraph to censor.} Secondly, the argument cannot end on so-called ``glue,'' such as a space or a carriage return. The following examples are, thus, bad forms of the \verb|\blackout| command: \verb|\blackout{Ends in space. Bad form }| \verb|\blackout{Ends in carriage return. Bad form|\\ \verb|}| Thirdly, periods are not censored (as of version 2.1). This is done because it is necessary to preserve the period-space combination that signifies end-of-sentence. In this way, {\LaTeX} can preserve spacing in the redacted version that is identical to the unredacted version. Fourthly, \verb|\blackout| does not work across environment boundaries, such as math or tabular mode. You can blackout text in the table, cell by cell; But you cannot blackout the whole tabular environment with the \verb|\blackout| command (instead should use the \verb|\censorbox| command for tabular environments). Finally, the argument to \verb|\blackout| can employ tokens; However, the tokens are expanded into one large blackout, regardless of whether the expanded token contains spaces. Thus \verb|\blackout{\today}| becomes \blackout{\today}, in spite of the fact that \verb|\today|, given at the moment by \today, constains spaces. \clearpage \section{Mode II: Public/Unsecure Source (.tex file)} This mode is envisioned for users who must bear a large level of inconvenience to work in a restricted/secure environment (generally meaning in a location physically removed from one's desk). Its use is envisioned to allow a large percentage of a document to be created in an public/unsecure environment, with only the restricted details being completed in a restricted/secure environment. After including the \verb|\usepackage{censor}| command in the document preamble, the \verb|\censor*| and \verb|\censorbox*| commands becomes accessible. The way this author envisions its use is as follows: {\addtolength{\leftskip}{2.3em} CENSORED UNRESTRICTED SOURCE: \hrulefill \verb|% KEYWORD IDENTIFIERS:|\\ \verb|\def\Missile{\censor*{7}}|\\ \verb|\def\Size{\censor*{2}}|\\ \verb|\def\TableOne{\censorbox*[\small]{26}{5}{3.5}}|\\ \verb||\\ \verb|The {\Missile} missile, with charge diameter (CD) of|\\ \verb|{\Size}~mm, revealed a penetration capability ranging from|\\ \verb|1.19--1.37~CD in three recent tests into armor steel, as|\\ \verb|detailed in Table 1.|\\ \verb||\\ \verb|\begin{table}[ht]|\\ \verb|\begin{center}|\\ \verb|\textbf{Table 1. {\Missile} Missile Test Data}\\|\\ \verb|{\TableOne}|\\ \verb|\end{center}|\\ \verb|\end{table}|\\ CENSORED UNRESTRICTED OUTPUT: \hrulefill \def\Missile{\censor*{7}} \def\Size{\censor*{2}} \def\TableOne{\censorbox*[\small]{26}{5}{3.5}} The {\Missile} missile, with charge diameter (CD) of {\Size}~mm, revealed a penetration capability ranging from 1.19--1.37~CD in three recent tests into armor steel, as detailed in Table 1. \begin{table}[ht] \begin{center} \textbf{Table 1. {\Missile} Missile Test Data}\\ {\TableOne} \end{center} \end{table} \hrulefill } In this way, the source (.tex file) contains no restricted information, and may thus be prepared in an unrestricted environment. The argument to the \verb|\censor*| command is a number representing the approximate width of the redaction (in ex's). In the case of the \verb|\censorbox*| command, it has three mandatory arguments and one optional argument (note that the unstarred form of the \verb|\censorbox| command has not three, but one, mandatory arguments). The mandatory arguments to \verb|\censorbox*| are box width (in ex's), box height (in multiples of \verb|\baselineskip|) and finally the depth below the baseline where the bottom of the box should be (in multiples of \verb|\baselineskip|). The optional argument can include commands that you want in force for the \verb|\censorbox| command, most typically fontsize commands, which will affect the size of the an ex and \verb|\baselineskip|. Because the redaction width is only approximate, it is possible that the censored and uncensored originals might have differing text justification. In the text, the curly braces are placed around the keyword identifiers so as to produce the proper interaction with the surrounding whitespace and punctuation. Because the source (.tex) file contains no restricted information, the use of \verb|\StopCensoring| cannot (in and of itself) produce the restricted document. Rather it will produce the following: {\addtolength{\leftskip}{2.3em} UNCENSORED UNRESTRICTED OUTPUT: \hrulefill \StopCensoring \def\Missile{\censor*{7}} \def\Size{\censor*{2}} \def\TableOne{\censorbox*[\small]{26}{5}{3.5}} The {\Missile} missile, with charge diameter (CD) of {\Size}~mm, revealed a penetration capability ranging from 1.19--1.37~CD in three recent tests into armor steel, as detailed in Table 1. \begin{table}[ht] \begin{center} \textbf{Table 1. {\Missile} Missile Test Data}\\ {\TableOne} \end{center} \end{table} \hrulefill } In order to produce the uncensored, restricted output, the unrestricted source file must be moved into the restricted/secure environment and be subject to a small amount of additional editing. Once in the restricted environment, the source (.tex file) may be edited such that the censored keyword identifiers are filled in with their restricted values and, in the process, changing the \verb|\censor*| and \verb|\censorbox*| commands to \verb|\censor| and \verb|\censorbox|, respectively. This and the addition of the \verb|\StopCensoring| command to the file will produce the uncensored, restricted result: \clearpage{\addtolength{\leftskip}{2.3em} UNCENSORED NO-LONGER-UNRESTRICTED SOURCE: \hrulefill \verb|\StopCensoring|\\ \verb|\def\Missile{\censor{Liberty}}|\\ \verb|\def\Size{\censor{80}}|\\ \verb|\def\TableOne{\censorbox{%|\\ \verb| \begin{tabular}{cc}|\\ \verb| Standoff & Penetration \\|\\ \verb| (CD) & (CD) \\|\\ \verb| \hline|\\ \verb| 5.0 & 1.30 \\|\\ \verb| 6.0 & 1.19 \\|\\ \verb| 6.8 & 1.37\\|\\ \verb| \end{tabular}%|\\ \verb|}}|\\ \verb||\\ \verb|The {\Missile} missile, with charge diameter (CD) of|\\ \verb|{\Size}~mm, revealed a penetration capability ranging|\\ \verb|from 1.19--1.37~CD in three recent tests into armor|\\ \verb|steel, as detailed in Table 1.|\\ \verb||\\ \verb|\begin{table}[ht]|\\ \verb|\begin{center}|\\ \verb|\textbf{Table 1. {\Missile} Missile Test Data}\\|\\ \verb|{\TableOne}|\\ \verb|\end{center}|\\ \verb|\end{table}|\\ UNCENSORED RESTRICTED OUTPUT: \hrulefill \StopCensoring \def\Missile{\censor{Liberty}} \def\Size{\censor{80}} \def\TableOne{\censorbox{% \begin{tabular}{cc} Standoff & Penetration \\ (CD) & (CD) \\ \hline 5.0 & 1.30 \\ 6.0 & 1.19 \\ 6.8 & 1.37\\ \end{tabular}% }} The {\Missile} missile, with charge diameter (CD) of {\Size}~mm, revealed a penetration capability ranging from 1.19--1.37~CD in three recent tests into armor steel, as detailed in Table 1. \begin{table}[ht] \begin{center} \textbf{Table 1. {\Missile} Missile Test Data}\\ {\TableOne} \end{center} \end{table} \hrulefill } The only changes required of the document were at the very beginning, among the keyword identifiers. The primary text of the source document remained unaltered. Note also that the censored, unrestricted output may also be obtained from the no-longer-unrestricted source by removing the \verb|\StopCensoring| command at the beginning of the file. It is not envisioned that the \verb|\blackout| command, discussed in the prior section, is used in this mode, where the source file is in an unsecure environment. \clearpage \section{Summary \& Miscellany} The complete set of commands available to the \textsf{censor} package, to bring about text redaction, are:\\ {~\\ \verb| \censor{|\it text\tt\}\\ \verb| \censor*{|\it width mult.\tt\}\\ \verb| \censorbox[|\it pre-commands\tt]\{\it object box\tt\}\\ \verb| \censorbox*[|\it pre-commands\tt]\{\it width mult.\tt\}\{\it height mult.\tt\}\{\it depth mult.\tt\}\\ \verb| \blackout{|\it extended text passage\tt\}\\ \verb| \bpar|\\ \verb| \StopCensoring|\\ \verb| \RestartCensoring|\\ ~\\} The star ({\tt*}) version of the commands is envisioned when the source document is being created in an unsecure environment, whereas, the unstarred version is when the document source may be created in a secure environment. In the star ({\tt*}) commands, width multipliers are given in ex's, whereas height and depth multipliers are given in multiples of \verb|\baselineskip|. The depth indicates the distance below the baseline where the bottom of a boxed object is to be placed (this command has a more direct effect for inline use, whereas use within environments is often overridden by the environment). The use of pre-commands will typically be fontsize commands, so that measurements of ex's and \verb|\baselineskip| are done in a relevant fontsize. The \verb|\bpar| command is provided as a paragraph separator for use with \verb|\blackout|, for censoring across paragraph boundaries. Censoring may be dynamically turned off and on in a document with the use of the \verb|\StopCensoring| and \verb|\RestartCensoring| commands, respectively. The default is censoring `on.' I have found that, in certain cases (for example, with captions created using the \textsf{boxhandler} package), the censorbox command needs to be protected by way of \verb|\protect\censorbox{...}|. It is preferable not to apply \verb|\censor| to whitespace, or text justification could be adversely affected. If one wishes to censor a multi-word phrase, such as ``Little Bo Peep,'' it is recommended to do it as follows:\\ \verb| \blackout{Little Bo Peep}|\\ If such a phrase is to be used repeatedly through a document, it is most convenient to place it as a keyword identifier:\\ \verb| \def\Name{\blackout{Little Bo Peep}}|\\ such that subsequent reference is done indirectly:\\ \verb| We examine the life of {\Name} in this report| The source code for \textsf{censor} is so short as to be included below: \verb|\ProvidesPackage{censor}|\\ \verb|[2013/02/19 v3.00|\\ \verb| Provides capability for redaction of sensitive information]|\\ \verb||\\ \verb|\usepackage{pbox}|\\ \verb|\usepackage{ifnextok}|\\ \verb||\\ \verb|\newcommand\censor{\@ifstar{\@cenlen}{\@cenword}}|\\ \verb| \newcommand\@cenlen[1]{\protect\rule[-.3ex]{#1 ex}{2.1ex}}|\\ \verb| \newcommand\@cenword[1]{%|\\ \verb| \protect\rule[-.3ex]{\widthofpbox{#1}}{2.1ex}}|\\ \verb||\\ \verb|\newcommand\un@censor{\@ifstar{\un@cenlen}{\un@cenword}}|\\ \verb| \newcommand\un@cenlen[1]{\protect\underline{\hspace{#1 ex}}}|\\ \verb| \newcommand\un@cenword[1]{#1}|\\ \verb||\\ \verb|\newcommand\StopCensoring{%|\\ \verb| \let\censor\un@censor%|\\ \verb| \let\censorbox\un@censorbox%|\\ \verb|}|\\ \verb|\newcommand\RestartCensoring{%|\\ \verb| \renewcommand\censor{\@ifstar{\@cenlen}{\@cenword}}%|\\ \verb| \renewcommand\censorbox{\@ifstar{\censor@dim}{\censor@box}}%|\\ \verb|}|\\ \verb||\\ \verb|\def\stringend{$}|\\ \verb|\def\blackout#1{\censor@Block#1\stringend}|\\ \verb|\def\censor@Block{\IfNextToken\stringend{\@gobble}%|\\ \verb| {\IfNextToken\@sptoken{ \bl@t{\censor@Block}}%|\\ \verb| {\bl@t{\censor@Block}}}}|\\ \verb||\\ \verb|% V2.00 DEFINITION:|\\ \verb|% \def\bl@t#1#2{\censor{#2}#1}|\\ \verb||\\ \verb|% V2.10 DEFINITION:|\\ \verb|\def\bl@t#1#2{\if\bpar#2\par\else\if.#2#2\else\censor{#2}\fi\fi#1}|\\ \verb|\def\bpar{_}|\\ \verb||\\ \verb|% ALTERNATE DEFINITION IF ABOVE PROVES PROBLEMATIC|\\ \verb|%\def\bl@t#1#2{\if.#2#2\else\censor{#2}\fi#1} % JUST PERIODS, NO \bpar|\\ \verb||\\ \verb|\newcommand\censorbox{\@ifstar{\censor@dim}{\censor@box}}|\\ \verb| \newcommand\censor@dim[4][]{{#1%|\\ \verb| \rule[-#4\baselineskip]{#2ex}{#3\baselineskip}}}|\\ \verb| \newcommand\censor@box[2][]{#1\setbox0\hbox{#2}%|\\ \verb| \rule[-\the\dp0]{\the\wd0}{\the\ht0+\the\dp0}}|\\ \verb||\\ \verb|\newcommand\un@censorbox{\@ifstar{\un@censor@dim}{\un@censor@box}}|\\ \verb| \newcommand\un@censor@dim[4][]{{#1%|\\ \verb| \fbox{\rule[-#4\baselineskip]{0ex}{#3\baselineskip}|\\ \verb| \rule{#2ex}{0ex}}}}|\\ \verb| \newcommand\un@censor@box[2][]{#1#2}|\\ \verb||\\ \verb|% NOTE: A \protect\censorbox{} MAY BE REQUIRED INSIDE SOME ENVIRONMENTS|\\ \verb||\\ \verb|\endinput|\\ \end{document}