Next: Introduction, Up: (dir) [Contents][Index]
This manual documents the Kpathsea library for path searching. It corresponds to version 6.3.3, released in February 2021.
| • Introduction | Overview and history. | |
| • unixtex.ftp | Obtaining TeX software. | |
| • Security | Who can write what files, etc. | |
| • TeX directory structure | Managing the horde of TeX input files. | |
| • Path searching | How filename lookups work. | |
| • TeX support | Special support for TeX-related file lookups. | |
| • Programming | How to use Kpathsea features in your program. | |
| • Reporting bugs | Where and how to report bugs. | |
| • Index | General index. | |
Next: unixtex.ftp, Previous: Top, Up: Top [Contents][Index]
This manual corresponds to version 6.3.3 of the Kpathsea library, released in February 2021.
The library’s fundamental purpose is to return a filename from a list of directories specified by the user, similar to what shells do when looking up program names to execute.
The following software, all of which is maintained in parallel, uses this library:
Other software that we do not maintain also uses it.
Kpathsea is now maintained as part of the TeX Live distribution (https://tug.org/texlive), which includes several more Kpathsea-using programs. For information on configuration, building, installing, and more, see Building TeX Live.
The library is still actively maintained. If you have comments or suggestions, please send along (see Reporting bugs).
The Kpathsea library is distributed under the GNU Library General Public License (LGPL), version 2.1 or (at your option) any later version. In short, this means if you write a program using the library, you must (offer to) distribute the source to the library, along with any changes you have made, and allow anyone to modify the library source and distribute their modifications. It does not mean you have to distribute the source to your program using the library, although we hope you will. See accompanying files for the text of the GNU licenses, or https://gnu.org/licenses.
If you know enough about TeX to be reading this manual, then you (or your institution) should consider joining the TeX Users Group (if you’re already a member, thanks!). TUG produces the periodical TUGboat, sponsors an annual meeting and publishes the proceedings, and arranges courses on TeX for all levels of users throughout the world. See https://tug.org for information.
| • History |
Up: Introduction [Contents][Index]
This section is for those people who are curious about how the library came about. If you like to read historical accounts of software, we urge you to seek out the GNU Autoconf manual and the “Errors of TeX” paper by Don Knuth, published in his book Digital Typography, among other places.
[Karl writes.] My first ChangeLog entry for Web2c seems to be
February 1990, but I may have done some work before then. In any
case, Tim Morgan and I were jointly maintaining it for a time. (I
should mention here that Tim had made Web2c into a real distribution
long before I had ever used it or even heard of it, and Tom Rokicki
did the original implementation. When I started, I was using
pxp and pc on VAX 11/750’s and the hot new Sun 2
machines.)
It must have been later in 1990 and 1991 that I started working on TeX for the Impatient. Dvips, Xdvi, Web2c, and the GNU fontutils (which I was also writing at the time) all used different environment variables, and, more importantly, had different bugs in their path searching. This became extremely painful, as I was stressing everything to the limit working on the book. I also desperately wanted to implement subdirectory searching, since I couldn’t stand putting everything in one big directory, and also couldn’t stand having to explicitly specify cm, pandora, … in a path.
In the first incarnation, I just hacked separately on each program—that was the original subdirectory searching code in both Xdvi and Dvips. That is, I tried to go with the flow in each program, rather than changing the program’s calling sequences to conform to new routines.
Then, as bugs inevitably appeared, I found I was fixing the same thing three times (Web2c and fontutils were already sharing code, since I maintained both of those—there was no Dvipsk or Xdvik or Dviljk at this point). After a while, I finally started sharing source files. They weren’t yet a library, though. I just kept things up to date with shell scripts. (I was developing on a 386 running ISC 2.2 at the time, and so didn’t have symbolic links. An awful experience.)
The ChangeLogs for Xdvik and Dvipsk record initial releases of those distributions in May and June 1992. I think it was because I was tired of the different configuration strategies of each program, not so much because of the path searching. Autoconf was being developed by David MacKenzie and others, and I was adapting it to TeX and friends.
I started to make a separate library that other programs could link with on my birthday in April 1993, according to the ChangeLog. I don’t remember exactly why I finally took the time to make it a separate library; a conversation with david zuhn initiated it. Just seemed like it was time.
Dviljk got started in March 1994 after I bought a Laserjet 4. (Kpathsea work got suspended while Norm Walsh and I, with Gustaf Neumann’s help, implemented a way for TeX to get at all those neat builtin LJ4 fonts … such a treat to have something to typeset in besides Palatino!)
By spring of 1995, I had implemented just about all the path-searching features in Kpathsea that I plan to, driven beyond my initial goals by Thomas Esser and others. I then started to integrate Web2c with Kpathsea. After the release of a stable Web2c, I hope to be able to stop development, and turn most of my attention back to making fonts for GNU. (Always assuming Micros**t hasn’t completely obliterated Unix by then, or that software patents haven’t stopped software development by anybody smaller than a company with a million-dollar-a-year legal budget. Which is actually what I think is likely to happen, but that’s another story…)
[Olaf writes.] At the end of 1997, Unix is still alive and kicking, individuals still develop software, and Web2c development still continues. Karl had been looking for some time for someone to take up part of the burden, and I volunteered.
[Karl writes again.] Indeed, time goes on. As of 2006 or so, Olaf’s available time for Kpathsea was reduced, and I started taking overall care of it again, although I did not do any significant new development. In 2009, Taco Hoekwater implemented a major rearrangement to make the library suitable for use within the MetaPost library (see Programming overview). Also, for some years now, Peter Breitenlohner has made many improvements to the infrastructure and kept it up-to-date with respect to the overall TeX Live build, where Kpathsea is now maintained.
Next: Security, Previous: Introduction, Up: Top [Contents][Index]
This is ftp://tug.org/tex/unixtex.ftp, a.k.a. https://tug.org/unixtex.ftp, last updated 29 February 2020. Email tex-k@tug.org with comments or questions.
The principal free TeX distribution for Unix-like systems is TeX Live, on the web at http://tug.org/texlive. The pages there describe many ways to acquire and/or build TeX, over the Internet or on physical media, both the sources and precompiled binaries for many systems, either standalone or as part of various operating system distributions.
Web2c, Kpathsea, Dvips, and Dviljk, among others, are no longer released as a separate packages. Their sources are now maintained as part of TeX Live.
The host ftp.cs.stanford.edu is the original source for the files for which Donald Knuth is directly responsible: tex.web, plain.tex, etc. However, unless you want to undertake the project of building your TeX system from scratch, it is more reliable and less work to retrieve these files as part of a larger package.
In any case, the Stanford ftp site is not the canonical source for anything except what was created as part of Knuth’s original TeX, so do not rely on any other files available there being up-to-date. The best place to check for up-to-date files is CTAN (the Comprehensive TeX Archive Network), https://ctan.org.
Next: TeX directory structure, Previous: unixtex.ftp, Up: Top [Contents][Index]
None of the programs in the TeX system require any special system privileges, so there’s no first-level security concern of people gaining illegitimate root access.
A TeX document, however, can write to arbitrary files, e.g., ~/.rhosts, and thus an unwitting user who runs TeX on a random document is vulnerable to a trojan horse attack. This loophole is closed by default, but you can be permissive if you so desire in texmf.cnf. See tex invocation in Web2c. MetaPost has the same issue.
Dvips, Xdvi, and TeX can also execute shell commands under some circumstances. To disable this, see the ‘-R’ option in Option details in Dvips, the xdvi man page, and tex invocation in Web2c, respectively.
Another security issue arises because it’s very useful—almost
necessary—to make arbitrary fonts on user demand with mktexpk
and friends. Where do these files get installed? By default, the
mktexpk distributed with Kpathsea assumes a world-writable
/var/tmp directory; this is a simple and convenient approach, but
it may not suit your situation because it means that a local cache of
fonts is created on every machine.
To avoid this duplication, many people consider a shared, globally
writable font tree desirable, in spite of the potential security
problems. To do this you should change the value of VARTEXFONTS
in texmf.cnf to refer to some globally known directory.
See mktex configuration.
The first restriction you can apply is to make newly-created directories under texmf be append-only with an option in mktex.cnf. See mktex configuration.
Another approach is to establish a group (or user) for TeX files,
make the texmf tree writable only to that group (or user), and
make mktexpk et al. setgid to that group (or setuid to that
user). Then users must invoke the scripts to install things. (If
you’re worried about the inevitable security holes in scripts, then you
could write a C wrapper to exec the script.)
The mktex… scripts install files with the same read and write permissions as the directory they are installed in. The executable, sgid, suid, and sticky bits are always cleared.
Any directories created by the mktex… scripts have the
same permissions as their parent directory, unless the
appendonlydir feature is used, in which case the sticky bit is
always set.
Next: Path searching, Previous: Security, Up: Top [Contents][Index]
This section describes the default installation hierarchy of the distribution. It conforms to both the GNU coding standards and the TeX directory structure (TDS) standard. For rationale and further explanation, please see those documents. The GNU document is available from https://gnu.org/prep/standards. The TDS document is available from http://mirror.ctan.org/tds (see unixtex.ftp).
In short, here is a skeleton of the default directory structure, extracted from the TDS document:
prefix/ installation root (/usr/local by default) bin/ executables man/ man pages include/ C header files info/ GNU info files lib/ libraries (libkpathsea.*) share/ architecture-independent files texmf/ TDS root bibtex/ BibTeX input files bib/ BibTeX databases base/ base distribution (e.g., ‘xampl.bib’) misc/ single-file databases pkg/ name of a package bst/ BibTeX style files base/ base distribution (e.g., ‘plain.bst’, ‘acm.bst’) misc/ single-file styles pkg/ name of a package doc/ additional documentation dvips/ ‘.pro’, ‘.ps’, ‘psfonts.map’ fonts/ font-related files type/ file type (e.g., ‘tfm’, ‘pk’) mode/ type of output device (types ‘pk’ and ‘gf’ only) supplier/ name of a font supplier (e.g., ‘public’) typeface/ name of a typeface (e.g., ‘cm’) dpinnn/ font resolution (types ‘pk’ and ‘gf’ only) metafont/ Metafont (non-font) input files base/ base distribution (e.g., ‘plain.mf’) misc/ single-file packages (e.g., ‘modes.mf’) pkg/ name of a package (e.g., ‘mfpic’) metapost/ MetaPost input files base/ base distribution (e.g., ‘plain.mp’) misc/ single-file packages pkg/ name of a package support/ support files for MetaPost-related utilities (e.g., ‘trfonts.map’) mft/ ‘MFT’ inputs (e.g., ‘plain.mft’) tex/ TeX input files format/ name of a format (e.g., ‘plain’) base/ base distribution for format (e.g., ‘plain.tex’) misc/ single-file packages (e.g., ‘webmac.tex’) local/ local additions to or local configuration files for format pkg/ name of a package (e.g., ‘graphics’, ‘mfnfss’) generic/ format-independent packages hyphen/ hyphenation patterns (e.g., ‘hyphen.tex’) images/ image input files (e.g., Encapsulated PostScript) misc/ single-file format-independent packages (e.g., ‘null.tex’). pkg/ name of a package (e.g., ‘babel’) web2c/ implementation-dependent files (.pool, .fmt, texmf.cnf, etc.)
Some concrete examples for most file types:
/usr/local/bin/tex /usr/local/man/man1/xdvi.1 /usr/local/info/kpathsea.info /usr/local/lib/libkpathsea.a /usr/local/share/texmf/bibtex/bst/base/plain.bst /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmr10.600pk /usr/local/share/texmf/fonts/source/public/pandora/pnr10.mf /usr/local/share/texmf/fonts/tfm/public/cm/cmr10.tfm /usr/local/share/texmf/fonts/type1/adobe/utopia/putr.pfa /usr/local/share/texmf/metafont/base/plain.mf /usr/local/share/texmf/metapost/base/plain.mp /usr/local/share/texmf/tex/plain/base/plain.tex /usr/local/share/texmf/tex/generic/hyphen/hyphen.tex /usr/local/share/texmf/web2c/tex.pool /usr/local/share/texmf/web2c/tex.fmt /usr/local/share/texmf/web2c/texmf.cnf
Next: TeX support, Previous: TeX directory structure, Up: Top [Contents][Index]
This chapter describes the generic path searching mechanism Kpathsea provides. For information about searching for particular file types (e.g., TeX fonts), see the next chapter.
This section, with minor differences, has been translated into several other languages (Chinese, Spanish, Russian, Japanese, French, German, …) as part of the TeX Live guide; see https://tug.org/texlive/doc.html for links.
| • Searching overview | Basic scheme for searching. | |
| • Path sources | Where search paths can be defined. | |
| • Path expansion | Special constructs in search paths. | |
| • Casefolding search | Fallback to case-insensitive search. | |
| • Filename database | Using an externally-built list to search. | |
| • Invoking kpsewhich | Standalone path lookup. |
Next: Path sources, Up: Path searching [Contents][Index]
A search path is a colon-separated list of path elements, which are directory names with a few extra frills. A search path can come from (a combination of) many sources; see below. To look up a file ‘foo’ along a path ‘.:/dir’, Kpathsea checks each element of the path in turn: first ./foo, then /dir/foo, returning the first match (or possibly all matches).
The “colon” and “slash” mentioned here aren’t necessarily ‘:’ and ‘/’ on non-Unix systems. Kpathsea tries to adapt to other operating systems’ conventions.
To check a particular path element e, Kpathsea first sees if a prebuilt database (see Filename database) applies to e, i.e., if the database is in a directory that is a prefix of e. If so, the path specification is matched against the contents of the database.
If the database does not exist, or does not apply to this path element, or contains no matches, the filesystem is searched (if this was not forbidden by the specification with ‘!!’ and if the file being searched for must exist). Kpathsea constructs the list of directories that correspond to this path element, and then checks in each for the file being searched for. (To help speed future lookups of files in the same directory, the directory in which a file is found is floated to the top of the directory list.)
The “file must exist” condition comes into play with VF files and input files read by the TeX ‘\openin’ command. These files might very well not exist (consider cmr10.vf), and so it would be wrong to search the disk for them. Therefore, if you fail to update ls-R when you install a new VF file, it will not be found.
Each path element is checked in turn: first the database, then the disk. If a match is found, the search stops and the result is returned (unless the search explicitly requested all matches). This avoids possibly-expensive processing of path specifications that are never needed on a particular run.
On Unix-like systems, if no match is found by any of the above, and the path element allows checking the filesystem (per the above), a final check is made for a case-insensitive match. Thus, looking for a name like ‘./FooBar.TeX’ will match a file ‘./foobar.tex’, and vice versa. This is not done on Windows. See Casefolding search.
Although the simplest and most common path element is a directory name, Kpathsea supports additional features in search paths: layered default values, environment variable names, config file values, users’ home directories, and recursive subdirectory searching. Thus, we say that Kpathsea expands a path element, meaning transforming all the magic specifications into the basic directory name or names. This process is described in the sections below. It happens in the same order as the sections.
Exception to all of the above: If the filename being searched for is absolute or explicitly relative, i.e., starts with ‘/’ or ‘./’ or ‘../’, Kpathsea simply checks if that file exists, with a fallback to a casefolding match if needed and enabled, as described above.
Ordinarily, if Kpathsea tries to access a file or directory that
cannot be read, it gives a warning. This is so you will be alerted to
directories or files that accidentally lack any read permission (for
example, a lost+found directory). If you prefer not to see
these warnings, include the value ‘readable’ in the
TEX_HUSH environment variable or config file value.
This generic path searching algorithm is implemented in kpathsea/pathsearch.c. It is employed by a higher-level algorithm when searching for a file of a particular type (see File lookup, and Glyph lookup).
Next: Path expansion, Previous: Searching overview, Up: Path searching [Contents][Index]
A search path or other configuration value can come from many sources. In the order in which Kpathsea looks for them:
--cnf-line, available in
kpsewhich and most TeX engines. See Path searching options.
A user-set environment variable, e.g., TEXINPUTS.
Environment variables with an underscore and the program name appended
override; for example, TEXINPUTS_latex overrides TEXINPUTS
if the program being run is named ‘latex’.
You can see each of these values for a given search path by using the debugging options (see Debugging).
These sources may be combined via default expansion (see Default expansion).
| • Config files | Kpathsea’s runtime config files (texmf.cnf). |
Up: Path sources [Contents][Index]
As mentioned above, Kpathsea reads runtime configuration files
named texmf.cnf for search path and other definitions. The
search path used to look for these configuration files is named
TEXMFCNF, and is constructed in the usual way, as described
above, except that configuration files cannot be used to define the
path, naturally; also, an ls-R database is not used to search for
them.
Kpathsea reads all texmf.cnf files in the search path, not just the first one found; definitions in earlier files override those in later files. Thus, if the search path is ‘.:$TEXMF’, values from ./texmf.cnf override those from $TEXMF/texmf.cnf.
If Kpathsea cannot find any texmf.cnf file, it reports a
warning including all the directories it checked. If you don’t want
to see this warning, set the environment variable
KPATHSEA_WARNING to the single character ‘0’ (zero, not
oh).
While (or instead of) reading this description, you may find it helpful to look at the distributed texmf.cnf, which uses or at least mentions most features. The format of texmf.cnf files follows:
% this is a comment var = a%b % but the value of var will be "a%b"
variable [. progname] [=] value
where the ‘=’ and surrounding whitespace is optional.
argv[0] is)
progname or progname.{exe,bat,cmd,...}. Most
notably, this allows different flavors of TeX to have different
search paths. The progname value is used literally, without
variable or other expansions.
The ‘$var.prog’ feature is not available on the right-hand side; instead, you must use an additional variable (see below for example).
A ‘;’ in value is translated to ‘:’ if running under Unix, in order to have a single texmf.cnf that can support both Unix and Windows systems. This translation happens with any value, not just search paths, but fortunately in practice ‘;’ is not needed in other values.
Here is a configuration file fragment illustrating most of these points:
% TeX input files -- i.e., anything to be found by \input or \openin ... latex209_inputs = .:$TEXMF/tex/latex209//:$TEXMF/tex// latex2e_inputs = .:$TEXMF/tex/latex//:$TEXMF/tex// TEXINPUTS = .:$TEXMF/tex// TEXINPUTS.latex209 = $latex209_inputs TEXINPUTS.latex2e = $latex2e_inputs TEXINPUTS.latex = $latex2e_inputs
This format has some similarity to Bourne shell scripts—change the
comment character to #, disallow spaces around the =,
and get rid of the .name convention, and it could be run
through the shell. However, there seemed little advantage in this,
since all the information would have to passed back to Kpathsea and
parsed there anyway, since the sh process couldn’t affect its
parent’s environment.
The combination of spaces being ignored before the . of a
program name qualifer and the optional ‘=’ for the assignment has
an unexpected consequence: if the value begins with a literal ‘.’
and the ‘=’ is omitted, the intended value is interpreted as a
program name. For example, a line var .;/some/path is taken as
an empty value for var running under the program named
‘;/some/path’. To diagnose this, Kpathsea warns if the program
name contains a path separator or other special character. The
simplest way to avoid the problem is to use the =.
Exactly when a character will be considered special or act as itself depends on the context in which it is used. The rules are inherent in the multiple levels of interpretation of the configuration (parsing, expansion, search, …) and so cannot be concisely stated, unfortunately. There is no general escape mechanism; in particular, ‘\’ is not an “escape character” in texmf.cnf files. When it comes choosing directory names for installation, it is safest to avoid them all.
The implementation of all this is in kpathsea/cnf.c.
Next: Casefolding search, Previous: Path sources, Up: Path searching [Contents][Index]
Kpathsea recognizes certain special characters and constructions in search paths, similar to that in shells. As a general example: ‘~$USER/{foo,bar}//baz’ expands to all subdirectories under directories foo and bar in $USER’s home directory that contain a directory or file baz.
These expansions are explained in the sections below.
| • Default expansion | a: or :a or a::b expands to a default. | |
| • Variable expansion | $foo and ${foo} expand to environment values. | |
| • Tilde expansion | ~ and ~user expand to home directories. | |
| • Brace expansion | a{foo,bar}b expands to afoob abarb. | |
| • KPSE_DOT expansion | . is replaced with $KPSE_DOT if it is defined. | |
| • Subdirectory expansion | a// and a//b recursively expand to subdirs. |
Next: Variable expansion, Up: Path expansion [Contents][Index]
If the highest-priority search path (see Path sources) contains an extra colon (i.e., leading, trailing, or doubled), Kpathsea inserts at that point the next-highest-priority search path that is defined. If that inserted path has an extra colon, the same happens with the next-highest. (An extra colon in the compile-time default value has unpredictable results, so installers beware.)
For example, given an environment variable setting
setenv TEXINPUTS /home/karl:
and a TEXINPUTS value from texmf.cnf of
.:$TEXMF//tex
then the final value used for searching will be:
/home/karl:.:$TEXMF//tex
Put another way, default expansion works on “formats” (search paths), and not directly on environment variables. Example, showing the trailing ‘:’ ignored in the first case and expanded in the second:
$ env TTFONTS=/tmp: kpsewhich --expand-path '$TTFONTS' /tmp $ env TTFONTS=/tmp: kpsewhich --show-path=.ttf /tmp:.:/home/olaf/texmf/fonts/truetype//:...
Since Kpathsea looks for multiple configuration files, it would be natural to expect that (for example) an extra colon in ./texmf.cnf would expand to the path in $TEXMF/texmf.cnf. Or, with Dvips’ configuration files, that an extra colon in config.$PRINTER would expand to the path in config.ps. This doesn’t happen. It’s not clear this would be desirable in all cases, and trying to devise a way to specify the path to which the extra colon should expand seemed truly baroque.
Technicality: Since it would be useless to insert the default value in more than one place, Kpathsea changes only one extra ‘:’ and leaves any others in place (they will eventually be ignored). Kpathsea checks first for a leading ‘:’, then a trailing ‘:’, then a doubled ‘:’.
You can trace this by debugging “paths” (see Debugging). Default expansion is implemented in the source file kpathsea/kdefault.c.
Next: Tilde expansion, Previous: Default expansion, Up: Path expansion [Contents][Index]
‘$foo’ or ‘${foo}’ in a path element is replaced by (1) the value of an environment variable ‘foo’ (if defined); (2) the value of ‘foo’ from texmf.cnf (if defined); (3) the empty string.
If the character after the ‘$’ is alphanumeric or ‘_’, the variable name consists of all consecutive such characters. If the character after the ‘$’ is a ‘{’, the variable name consists of everything up to the next ‘}’ (braces may not be nested around variable names). Otherwise, Kpathsea gives a warning and ignores the ‘$’ and its following character.
You must quote the $’s and braces as necessary for your shell.
Shell variable values cannot be seen by Kpathsea, i.e., ones
defined by set in C shells and without export in Bourne
shells.
For example, given
setenv tex /home/texmf
setenv TEXINPUTS .:$tex:${tex}prev
the final TEXINPUTS path is the three directories:
.:/home/texmf:/home/texmfprev
The ‘.progname’ suffix on variables and ‘_progname’ on environment variable names are not implemented for general variable expansions. These are only recognized when search paths are initialized (see Path sources).
Variable expansion is implemented in the source file kpathsea/variable.c.
Next: Brace expansion, Previous: Variable expansion, Up: Path expansion [Contents][Index]
A leading ‘~’ in a path element is replaced by the value of the
environment variable HOME, or . if HOME is not
set. On Windows, the environment variable USERPROFILE is
checked instead of HOME.
A leading ‘~user’ in a path element is replaced by user’s home directory from the system passwd database.
For example,
setenv TEXINPUTS ~/mymacros:
will prepend a directory mymacros in your home directory to the default path.
As a special case, if a home directory ends in ‘/’, the trailing slash is dropped, to avoid inadvertently creating a ‘//’ construct in the path. For example, if the home directory of the user ‘root’ is ‘/’, the path element ‘~root/mymacros’ expands to just ‘/mymacros’, not ‘//mymacros’.
Tilde expansion is implemented in the source file kpathsea/tilde.c.
Next: KPSE_DOT expansion, Previous: Tilde expansion, Up: Path expansion [Contents][Index]
‘x{a,b}y’ expands to ‘xay:xby’. For example:
foo/{1,2}/baz
expands to ‘foo/1/baz:foo/2/baz’. ‘:’ is the path separator on the current system; e.g., on a Windows system, it’s ‘;’.
Braces can be nested; for example, ‘x{A,B{1,2}}y’ expands to ‘xAy:xB1y:xB2y’.
Multiple non-nested braces are expanded from right to left; for example, ‘x{A,B}{1,2}y’ expands to ‘x{A,B}1y:x{A,B}2y’, which expands to ‘xA1y:xB1y:xA2y:xB2y’.
This feature can be used to implement multiple TeX hierarchies, by
assigning a brace list to $TEXMF, as mentioned in
texmf.in.
You can also use the path separator instead of the comma. The last example could have been written ‘x{A:B}{1:2}y’ (on Unix).
Brace expansion is implemented in the source file kpathsea/expand.c.
Next: Subdirectory expansion, Previous: Brace expansion, Up: Path expansion [Contents][Index]
KPSE_DOT expansionWhen KPSE_DOT is defined in the environment, it names a directory
that should be considered the current directory for the purpose of
looking up files in the search paths. This feature is needed by the
‘mktex…’ scripts mktex scripts, because these
change the working directory. You should not ever define it yourself.
Previous: KPSE_DOT expansion, Up: Path expansion [Contents][Index]
Two or more consecutive slashes in a path element following a directory d is replaced by all subdirectories of d: first those subdirectories directly under d, then the subsubdirectories under those, and so on. At each level, the order in which the directories are searched is unspecified. (It’s “directory order”, and definitely not alphabetical.)
If you specify any filename components after the ‘//’, only subdirectories which match those components are included. For example, ‘/a//b’ would expand into directories /a/1/b, /a/2/b, /a/1/1/b, and so on, but not /a/b/c or /a/1.
You can include multiple ‘//’ constructs in the path.
‘//’ at the beginning of a path is ignored; you didn’t really want to search every directory on the system, did you?
I should mention one related implementation trick, which I took from GNU find. Matthew Farwell suggested it, and David MacKenzie implemented it.
The trick is that in every real Unix implementation (as opposed to the
POSIX specification), a directory which contains no subdirectories will
have exactly two links (namely, one for . and one for ..).
That is to say, the st_nlink field in the ‘stat’ structure
will be two. Thus, we don’t have to stat everything in the bottom-level
(leaf) directories—we can just check st_nlink, notice it’s two,
and do no more work.
But if you have a directory that contains a single subdirectory and 500
regular files, st_nlink will be 3, and Kpathsea has to stat every
one of those 501 entries. Therein lies slowness.
You can disable the trick by undefining ST_NLINK_TRICK in
kpathsea/config.h. (It is undefined by default except under Unix.)
Unfortunately, in some cases files in leaf directories are
stat’d: if the path specification is, say,
‘$TEXMF/fonts//pk//’, then files in a subdirectory
‘…/pk’, even if it is a leaf, are checked. The reason
cannot be explained without reference to the implementation, so read
kpathsea/elt-dirs.c (search for ‘may descend’) if you are
curious. And if you find a way to solve the problem, please let me
know.
Subdirectory expansion is implemented in the source file kpathsea/elt-dirs.c.
Next: Filename database, Previous: Path expansion, Up: Path searching [Contents][Index]
In Kpathsea version 6.3.0 (released with TeX Live 2018), a new fallback search was implemented on Unix-like systems, including Macs: for each path element in turn, if no match is found by the normal search, and the path element allows for checking the filesystem, a second check is made for a case-insensitive match.
This is enabled at compile-time on Unix systems, and enabled at
runtime by setting the configuration variable
texmf_casefold_search, to a true value, e.g., ‘1’; this is
done by default in TeX Live.
| • Rationale | ||
| • Examples |
Next: Casefolding examples, Up: Casefolding search [Contents][Index]
The purpose of the fallback casefolding search is to ease moving complex documents between case-insensitive (file)systems and case-sensitive ones. In particular, Apple decided to make the default filesystem on Macs be case-insensitive some years ago, and this has exacerbated a problem of people creating documents that use, say, an image under the name foo.jpg, while the actual file is named foo.JPG or Foo.jpg. It works on the Mac but if the document is transferred and run on a standard case-sensitive Unix (file)system, the file can’t be found, due only to differences in case.
This same problematic scenario has always existed on Windows, but for whatever reason, it has become much more common since Apple also went to a case-insensitive filesystem. Hence the relatively late change to the Kpathsea behavior.
The fallback case-insensitive search is omitted at compile-time on Windows, where (for practical purposes) all file names are case-insensitive at the kernel level, and so the normal search will already have definitively matched or not. Therefore, search results in unusual cases can be different on Windows and Unix—but this has always been true.
Previous: Casefolding rationale, Up: Casefolding search [Contents][Index]
The casefolding implementation prefers exact matches to casefolded matches within a given path element, so as to retain most compatibility. Backward compatibility is not perfect, however, as a casefolded match may be found in an earlier path element than an exact match was previously found (see example #4 below). Still, preferring the match in the earlier element seemed potentially less confusing than otherwise, and is in fact consistent with past behavior on Windows. Since case mismatches are rare to begin with, and name collisions with respect only to case thus even more rare, the hope is that it will not cause difficulties in practice.
If it’s desirable in a given situation to have the exact same search
behavior as previously, that can be accomplished by setting the
configuration variable texmf_casefold_search to ‘0’
(see Path sources).
Some examples to illustrate the new behavior follow.
Example #1: suppose the file ./foobar.tex exists. Now,
searching for ./FooBar.TeX (or any other case variation) will
succeed, returning ./foobar.tex—the name as stored on disk.
In previous releases, or if texmf_casefold_search is false, the
search would fail.
Example #2: suppose we are using a case-sensitive (file)system, and the search path is ‘.:/somedir’, and the files ./foobar.tex and /somedir/FooBar.TeX both exist. Both now and previously, searching for foobar.tex returns ./foobar.tex. However, searching for FooBar.TeX now returns ./foobar.tex instead of /somedir/FooBar.TeX; this is the incompatibility mentioned above. Also (as expected), searching for FOOBAR.TEX (or whatever variation) will now return ./foobar.tex, whereas before it would fail. Searching for all (‘kpsewhich --all’) foobar.tex will return both matches.
Example #3: same as example #2, but on a case-insensitive (file)system: both now and previously, searching for FooBar.TeX returns ./foobar.tex, since the system considers that a match. The Kpathsea casefolding never comes into play.
Example #4: if we have (on a case-sensitive system) both ./foobar.tex and ./FOOBAR.TEX, searching with the exact case returns that exact match, now and previously. Searching for FooBar.tex will now return one or the other (chosen arbitrarily), rather than failing. Perhaps unexpectedly, searching for all foobar.tex or FooBar.tex will also return only one or the other, not both (see more below).
Example #5: the font file STIX-Regular.otf is included in TeX Live in the system directory texmf-dist/fonts/opentype/public/stix. Because Kpathsea never searches the disk in the big system directory, the casefolding is not done, and a search for ‘stix-regular.otf’ will fail (on case-sensitive systems), as it always has.
The caveat about not searching the disk amounts to saying that
casefolding does not happen in the trees specified with ‘!!’
(see ls-R), that is, where only database (ls-R) searching
is done. In TeX Live, that is the ‘texmf-local’ and
‘texmf-dist’ trees (also $TEXMFSYSCONFIG and
$TEXMFSYSVAR, but those are rarely noticed). The rationale for
this is that in practice, case mangling happens with user-created
files, not with packages distributed as part of the TeX system.
One more caveat: the purpose of kpsewhich is to exercise the
path searching in Kpathsea as it is actually done. Therefore, as
shown above, ‘kpsewhich --all’ will not return all matches
regardless of case within a given path element. If you want to find
all matches in all directories, find is the best tool, although
the setup takes a couple steps:
kpsewhich -show-path=tex >/tmp/texpath # search path specification kpsewhich -expand-path="`cat /tmp/texpath`" >/tmp/texdirs # all dirs tr ':' '\n' </tmp/texdirs >/tmp/texdirlist # colons to newlines find `cat /tmp/texdirlist` -iname somefile.tex -print </tmp/texdirlist
Sorry that it’s annoyingly lengthy, but implementing this inside
Kpathsea would be a lot of error-prone trouble for something that is
only useful for debugging. If your find does not support
-iname, you can get GNU Find from
https://gnu.org/software/findutils.
The casefolding search is implemented in the source file kpathsea/pathsearch.c. Two implementation points:
access
system call).
Next: Invoking kpsewhich, Previous: Casefolding search, Up: Path searching [Contents][Index]
ls-R)Kpathsea goes to some lengths to minimize disk accesses for searches (see Subdirectory expansion). Nevertheless, in practice searching every possible directory in typical TeX installations takes an excessively long time.
Therefore, Kpathsea can use an externally-built filename database file named ls-R that maps files to directories, thus avoiding the need to exhaustively search the disk.
A second database file aliases allows you to give additional names to the files listed in ls-R.
The ls-R and aliases features are implemented in the source file kpathsea/db.c.
| • ls-R | The main filename database. | |
| • Filename aliases | Aliases for those names. | |
| • Database format | Syntax details of the database file. |
Next: Filename aliases, Up: Filename database [Contents][Index]
As mentioned above, you must name the main filename database
ls-R. You can put one at the root of each TeX installation
hierarchy you wish to search ($TEXMF by default, which expands
to a braced list of several hierarchies in TeX Live).
Kpathsea looks for ls-R files along the TEXMFDBS
path. It is best for this to contain all and only those hierarchies
from $TEXMF which are specified with !!—and also to
specify them with !! in TEXMFDBS. (See the end of this
section for more on !!.)
The recommended way to create and maintain ‘ls-R’ is to run the
mktexlsr script, which is installed in ‘$(bindir)’
(/usr/local/bin by default). That script goes to some trouble to
follow symbolic links as necessary, etc. It’s also invoked by the
distributed ‘mktex…’ scripts.
At its simplest, though, you can build ls-R with the command
cd /your/texmf/root && ls -LAR ./ >ls-R
presuming your ls produces the right output format (see the
section below). GNU ls, for example, outputs in this format.
Also presuming your ls hasn’t been aliased in a system file
(e.g., /etc/profile) to something problematic, e.g., ‘ls
--color=tty’. In that case, you will have to disable the alias before
generating ls-R. For the precise definition of the file format,
see Database format.
Regardless of whether you use the supplied script or your own, you
will almost certainly want to invoke it via cron, so when you
make changes in the installed files (say if you install a new LaTeX
package), ls-R will be automatically updated. However, for
those using TeX Live or system distributions, the package managers
should run mktexlsr as needed.
The ‘-A’ option to ls includes files beginning with ‘.’
(except for . and ..), such as the file .tex
included with the LaTeX tools package. (On the other hand,
directories whose names begin with ‘.’ are always ignored.)
If your system does not support symbolic links, omit the ‘-L’.
ls -LAR /your/texmf/root will also work. But using
‘./’ avoids embedding absolute pathnames, so the hierarchy can be
easily transported. It also avoids possible trouble with automounters
or other network filesystem conventions.
Kpathsea warns you if it finds an ls-R file, but the file does not contain any usable entries. The usual culprit is running plain ‘ls -R’ instead of ‘ls -LR ./’ or ‘ls -R /your/texmf/root’. Another possibility is some system directory name starting with a ‘.’ (perhaps if you are using AFS); Kpathsea ignores everything under such directories.
If a particular path element begins with ‘!!’, only the database will be searched for that element, never the disk; and if the database does not exist, nothing at all will be searched. In TeX Live, most of the trees are specified with ‘!!’.
For path elements that do not begin with ‘!!’, if the database
exists, it will be used, and the disk will not be searched. However,
in this case, if the database does not exist, the disk will be
searched. In TeX Live, the most notable case of this is the
TEXMFHOME tree, to allow users to add and remove files from
their own tree without having to worry about ls-R.
(Aside: there are uncommon cases where a ‘!!’ tree will be
searched on disk even if the ls-R file exists; they are too
obscure to try to explain here. See pathsearch.c in the source
if you need to know.)
To sum up: do not create an ls-R file unless you also take care
to keep it up to date. Otherwise newly-installed files will not be
found.
Next: Database format, Previous: ls-R, Up: Filename database [Contents][Index]
In some circumstances, you may wish to find a file under several names. For example, suppose a TeX document was created using a DOS system and tries to read longtabl.sty. But now it’s being run on a Unix system, and the file has its original name, longtable.sty. The file won’t be found. You need to give the actual file longtable.sty an alias ‘longtabl.sty’.
You can handle this by creating a file aliases as a companion to the ls-R for the hierarchy containing the file in question. (You must have an ls-R for the alias feature to work.)
The format of aliases is simple: two whitespace-separated words per line; the first is the real name longtable.sty, and second is the alias (longtabl.sty). These must be base filenames, with no directory components. longtable.sty must be in the sibling ls-R.
Also, blank lines and lines starting with ‘%’ or ‘#’ are ignored in aliases, to allow for comments.
If a real file longtabl.sty exists, it is used regardless of any aliases.
Previous: Filename aliases, Up: Filename database [Contents][Index]
The “database” read by Kpathsea is a line-oriented file of plain
text. The format is that generated by GNU (and most other) ls
programs given the ‘-R’ option, as follows.
For example, here’s the first few lines of ls-R (which totals about 30K bytes) on my system:
bibtex dvips fonts ls-R metafont metapost tex web2c ./bibtex: bib bst doc ./bibtex/bib: asi.bib btxdoc.bib …
Previous: Filename database, Up: Path searching [Contents][Index]
kpsewhich: Standalone path searchingThe Kpsewhich program exercises the path searching functionality
independent of any particular application. This can also be useful as a
sort of find program to locate files in your TeX hierarchies,
perhaps in administrative scripts. It is used heavily in the
distributed ‘mktex…’ scripts.
Synopsis:
kpsewhich option… filename…
The options and filename(s) to look up can be intermixed. Options can start with either ‘-’ or ‘--’, and any unambiguous abbreviation is accepted.
| • Path searching options | Changing the mode, resolution, etc. | |
| • Specially-recognized files | Default formats for texmf.cnf, etc. | |
| • Auxiliary tasks | Path and variable expansion, etc. | |
| • Standard options | ‘--help’ and ‘--version’. |
Next: Specially-recognized files, Up: Invoking kpsewhich [Contents][Index]
Kpsewhich looks up each non-option argument on the command line as a filename, and returns the first file found.
Various options alter the path searching behavior:
Report all matches found, one per line. By default, if there is more
than one match, just one will be reported (chosen effectively at
random). Exception: with the glyph formats (pk, gf),
this option has no effect and only the first match is returned.
Explicitly enable or disable the fallback to a case-insensitive search
on Unix platforms (see Casefolding search); no effect on Windows.
The default is enabled, set in texmf.cnf. Disabling
(--no-casefold-search) does not mean that searches magically
become case-sensitive when the underlying (file)system is
case-insensitive, it merely means that Kpathsea does not do any
casefolding itself.
Parse str as if it were a line in the texmf.cnf configuration file (see Config files), overriding settings in the actual configuration files, and also in the environment (see Path sources). This is implemented by making any settings from str in the environment, overwriting any value already there. Thus, an extra colon in a ‘--cnf-line’ value will refer to the value from a configuration file, not a user-set environment variable.
Furthermore, any variable set from str will also be set with the
program name suffix. For example, pdftex
--cnf-line=TEXINPUTS=/foo: will set both TEXINPUTS and
TEXINPUTS_pdftex in the environment (and the value will be
/foo followed by the setting from texmf.cnf, ignoring
any user-set TEXINPUTS).
This behavior is desirable because, in practice, many variables in the
distributed texmf.cnf are program-specific, and the intuitive
behavior is for values set on the command line with --cnf-line
to override them.
Set the resolution to num; this only affects ‘gf’ and ‘pk’ lookups. ‘-D’ is a synonym, for compatibility with Dvips. Default is 600.
Set the engine name to name. By default it is not set. The engine name is used in some search paths to allow files with the same name but used by different engines to coexist.
In particular, since the memory dump files (.fmt/.base/.mem) are now stored in subdirectories named for the engine (tex, pdftex, xetex, etc.), you must specify an engine name in order to find them. For example, cont-en.fmt typically exists for both pdftex and xetex. With the default path settings, you can use ‘--engine=/’ to look for any dump file, regardless of engine; if a dump file exists for more than one engine, it’s indeterminate which one is returned. (The ‘/’ ends up specifying a normal recursive search along the path where the dumps are stored, namely ‘$TEXMF/web2c{/$engine,}’.)
Set the format for lookup to name. By default, the format is guessed from the filename, with ‘tex’ being used if nothing else fits. The recognized filename extensions (including any leading ‘.’) are also allowable names.
All formats also have a name, which is the only way to specify formats with no associated suffix. For example, for Dvips configuration files you can use ‘--format="dvips config"’. (The quotes are for the sake of the shell.)
Here’s the current list of recognized names and the associated suffixes. See Supported file formats, for more information on each of these.
The strings in parentheses are abbreviations recognized only by
kpsewhich (not the underlying library calls). They are
provided when it would otherwise require an argument containing a
space to specify the format, to simplify quoting of calls from shells.
gf: gf pk: pk bitmap font (bitmapfont): tfm: .tfm afm: .afm base: .base bib: .bib bst: .bst cnf: .cnf ls-R: ls-R ls-r fmt: .fmt map: .map mem: .mem mf: .mf mfpool: .pool mft: .mft mp: .mp mppool: .pool MetaPost support (mpsupport): ocp: .ocp ofm: .ofm .tfm opl: .opl .pl otp: .otp ovf: .ovf .vf ovp: .ovp .vpl graphic/figure: .eps .epsi tex: .tex .sty .cls .fd .aux .bbl .def .clo .ldf TeX system documentation (doc): texpool: .pool TeX system sources (source): .dtx .ins PostScript header: .pro Troff fonts (trofffont): type1 fonts: .pfa .pfb vf: .vf dvips config (dvipsconfig): ist: .ist truetype fonts: .ttf .ttc .TTF .TTC .dfont type42 fonts: .t42 .T42 web2c files (web2c): other text files (othertext): other binary files (otherbin): misc fonts (miscfont): web: .web .ch cweb: .w .web .ch enc files: .enc cmap files (cmap): subfont definition files: .sfd opentype fonts: .otf pdftex config (pdftexconfig): lig files: .lig texmfscripts: lua: .lua .luatex .luc .luctex .texlua .texluc .tlu font feature files: .fea cid maps: .cid .cidmap mlbib: .mlbib .bib mlbst: .mlbst .bst clua: .dll .so ris: .ris bltxml: .bltxml
This option and ‘--path’ are mutually exclusive.
After processing the command line, read additional filenames to look up from standard input.
Turn on or off the ‘mktex’ script associated with filetype.
Usual values for filetype are ‘pk’, ‘mf’, ‘tex’,
and ‘tfm’. By default, all are off in Kpsewhich, even if they
are enabled for TeX. This option implies setting
--must-exist. See mktex scripts.
Set the mode name to string; this also only affects ‘gf’ and ‘pk’ lookups. No default: any mode will be found. See mktex script arguments.
Do everything possible to find the files, notably including searching the disk and running the ‘mktex’ scripts. By default, only the ls-R database is checked, in the interest of efficiency.
Search along the path string (colon-separated as usual), instead of guessing the search path from the filename. ‘//’ and all the usual expansions are supported (see Path expansion). This option and ‘--format’ are mutually exclusive. To output the complete directory expansion of a path, instead of doing a one-shot lookup, see ‘--expand-path’ and ‘--show-path’ in the following section.
Set the program name to name; default is ‘kpsewhich’. This can affect the search paths via the ‘.prognam’ feature in configuration files (see Config files).
Report only those matches whose directory part ends with string (compared literally, except case is ignored on a case-insensitive operating system). For example, suppose there are two matches for a given name:
kpsewhich foo.sty ⇒ /some/where/foo.sty /another/place/foo.sty
Then we can narrow the result to what we are interested in with --subdir:
kpsewhich --subdir=where foo.sty ⇒ /some/where/foo.sty kpsewhich --subdir=place foo.sty ⇒ /another/place/foo.sty
The string to match must be at the end of the directory part of the match, and it is taken literally, with no pattern matching:
kpsewhich --subdir=another foo.sty ⇒
The string to match may cross directory components:
kpsewhich --subdir=some/where foo.sty ⇒ /some/where/foo.sty
--subdir implies --all; if there is more than one match, they will all be reported (in our example, both ‘where’ and ‘place’ end in ‘e’):
kpsewhich --subdir=e ⇒ /some/where/foo.sty /another/place/foo.sty
Because of the above rules, the presence of a leading ‘/’ is important, since it “anchors” the match to a full component name:
kpsewhich --subdir=/lace foo.sty ⇒
However, a trailing ‘/’ is immaterial (and ignored), since the match always takes place at the end of the directory part:
kpsewhich --subdir=lace/ foo.sty ⇒ /another/place/foo.sty
The purpose of these rules is to make it convenient to find results only within a particular area of the tree. For instance, a given script named foo.lua might exist within both texmf-dist/scripts/pkg1/ and texmf-dist/scripts/pkg2/. By specifying, say, ‘--subdir=/pkg1’, you can be sure of getting the one you are interested in.
We only match at the end because a site might happen to install TeX in /some/coincidental/pkg1/path/, and we wouldn’t want to match texmf-dist/scripts/pkg2/ that when searching for ‘/pkg1’.
Next: Auxiliary tasks, Previous: Path searching options, Up: Invoking kpsewhich [Contents][Index]
kpsewhichkpsewhich recognizes a few special filenames on the command
line and defaults to using the ‘known’ file formats for them, merely
to save the time and trouble of specifying the format. This is only a
feature of kpsewhich; when using the Kpathsea library
itself, none of these special filenames are recognized, and it’s still
up to the caller to specify the desired format.
Here is the list of special filenames to kpsewhich, along
with their corresponding format:
dvips config
‘other text files’
‘web2c files’
‘map’
‘web2c files’
‘map’
‘pdftex config’ (although pdftex.cfg is not used any more; look for the file pdftexconfig.tex instead.)
‘cnf’
‘other text files’
A user-specified format will override the above defaults.
Another useful configuration file in this regard is tcfmgr.map, found in texmf/texconfig/tcfmgr.map, which records various information about the above configuration files (among others).
Next: Standard options, Previous: Specially-recognized files, Up: Invoking kpsewhich [Contents][Index]
Kpsewhich provides some features in addition to path lookup as such:
Set debugging options to num. See Debugging.
Output variable, tilde, and brace expansion of string, which is assumed to be a single path element. See Path expansion.
Output the complete expansion of string, with each element separated by the usual path separator on the current system (‘;’ on Windows, ‘:’ otherwise). This may be useful to construct a custom search path for a format not otherwise supported. To retrieve the search path for a format that is already supported, see ‘--show-path’.
Nonexistent directories are culled from the output:
$ kpsewhich --expand-path '/tmp' ⇒ /tmp $ kpsewhich --expand-path '/nonesuch' ⇒
For one-shot uses of an arbitrary (not built in to Kpathsea) path, see ‘--path’ (see Path searching options).
Output the variable and tilde expansion of string. For example,
with the usual texmf.cnf, ‘kpsewhich
--expand-var='$TEXMF'’ returns the TeX system hierarchy root(s).
See Path expansion. The specified string can contain
anything, though, not just variable references. This calls
kpse_var_expand (see Programming with config files).
Output information about each supported format (see Supported file formats), including the names and abbreviations, variables looked for, and the original path.
Exit successfully if name is safe to open for reading or writing, respectively, else unsuccessfully. No output is written. These tests take account of the related Kpathsea configuration settings (see Calling sequence).
Show the path that would be used for file lookups of file type name. Either a filename extension (‘pk’, ‘.vf’, etc.) or an integer can be used, just as with ‘--format’, described in the previous section.
Like ‘--var-value’ (next), but also expands ‘{...}’ constructs. (see Brace expansion). Thus, the value is assumed to possibly be several path elements, and ‘~’ is expanded at the beginning of each. The path separator is changed to that of the current system in the expansion.
Example: ‘FOO='.;~' kpsewhich --var-brace-value=FOO’ outputs (on a Unix-ish system) ‘.:/home/karl’, supposing the latter is the current user’s home directory. Note that the ‘;’ in the source value, as commonly used in texmf.cnf, has changed to a ‘:’, as the normal path separator on the current system. On a Windows-ish system, the ‘;’ would remain.
Outputs the value of variable (a simple identifier like ‘TEXMFDIST’, with no ‘$’ or other constructs), expanding ‘$’ (see Variable expansion) and ‘~’ (see Tilde expansion) constructs in the value. ‘~’ expansion happens at the beginning of the overall value and at the beginning of a variable expansion, but not arbitrarily within the string. Braces are not expanded.
Example: ‘--var-value=texmf_casefold_search’ outputs (if the default is not changed) ‘1’.
Example to contrast with ‘--var-brace-value’: ‘FOO='.;~' kpsewhich --var-value=FOO’ outputs ‘.;~’, i.e., the same as the input value, on all systems.
Previous: Auxiliary tasks, Up: Invoking kpsewhich [Contents][Index]
Kpsewhich accepts the standard GNU options:
Next: Programming, Previous: Path searching, Up: Top [Contents][Index]
Although the basic features in Kpathsea can be used for any type of path searching, it came about, as usual, with a specific application in mind: I wrote Kpathsea specifically for TeX system programs. I had been struggling with the programs I was using (Dvips, Xdvi, and TeX itself) having slightly different notions of how to specify paths; and debugging was painful, since no code was shared.
Therefore, Kpathsea provides some TeX-specific formats and features. Indeed, many of the purportedly generic path searching features were provided because they seemed useful in that conTeXt (font lookup, particularly).
Kpathsea provides a standard way to search for files of any of the supported file types; glyph fonts are a bit different than all the rest. Searches are based solely on names of files, not their contents—if a GF file is (mis)named cmr10.600pk, it will be found as a PK file.
| • Supported file formats | File types Kpathsea knows about. | |
| • File lookup | Searching for most kinds of files. | |
| • Glyph lookup | Searching for bitmap fonts. | |
| • Suppressing warnings | Avoiding warnings via TEX_HUSH. | |
| • mktex scripts | Generating files at runtime. |
Next: File lookup, Up: TeX support [Contents][Index]
Kpathsea has support for a number of file types. Each file type has a list of environment and config file variables that are checked to define the search path, and most have a default suffix that plays a role in finding files (see the next section). Some also define additional suffixes, and/or a program to be run to create missing files on the fly.
Since environment variables containing periods, such as ‘TEXINPUTS.latex’, are not allowed on some systems, Kpathsea looks for environment variables with an underscore, e.g., ‘TEXINPUTS_latex’ (see Config files).
The following table lists the above information. You can also get the
list by giving the ‘--help-formats’ option to kpsewhich
(see Auxiliary tasks).
(Adobe font metrics, see Metric files in Dvips)
AFMFONTS;
suffix ‘.afm’.
(Metafont memory dump, see Memory dumps in Web2c)
MFBASES, TEXMFINI;
suffix ‘.base’.
(BibTeX bibliography source, see bibtex invocation in Web2c)
BIBINPUTS, TEXBIB;
suffix ‘.bib’.
(BibLaTeXML bibliography files for Biber, https://ctan.org/pkg/biber)
BLTXMLINPUTS
suffix ‘.bltxml’.
(BibTeX style, see Basic BibTeX
style files in Web2c)
BSTINPUTS;
suffix ‘.bst’.
(dynamic libraries for Lua, https://ctan.org/pkg/luatex)
CLUAINPUTS
suffixes ‘.dll’ and ‘.so’.
(character map files)
CMAPFONTS;
suffix ‘.cmap’.
(Runtime configuration files, see Config files)
TEXMFCNF;
suffix ‘.cnf’.
(CWEB input files)
CWEBINPUTS;
suffixes ‘.w’, ‘.web’;
additional suffix ‘.ch’.
(Dvips ‘config.*’ files, such as config.ps, see Config
files in Dvips)
TEXCONFIG.
(encoding vectors)
ENCFONTS;
suffix ‘.enc’.
(TeX memory dump, see Memory dumps in Web2c)
TEXFORMATS, TEXMFINI;
suffix ‘.fmt’.
(CJK mapping)
FONTCIDMAPS
suffix ‘.cid’.
(primarily for OpenType font features)
FONTFEATURES
suffix ‘.fea’.
(generic font bitmap, see Glyph files in Dvips)
programFONTS, GFFONTS, GLYPHFONTS, TEXFONTS;
suffix ‘gf’.
(Encapsulated PostScript figures, see PostScript figures in Dvips)
TEXPICTS, TEXINPUTS;
additional suffixes: ‘.eps’, ‘.epsi’.
(makeindex style files)
TEXINDEXSTYLE, INDEXSTYLE;
suffix ‘.ist’.
(ligature definition files)
LIGFONTS;
suffix ‘.lig’.
(Filename databases, see Filename database)
TEXMFDBS.
(Fontmaps, see Fontmap)
TEXFONTMAPS;
suffix ‘.map’.
(MetaPost memory dump, see Memory dumps in Web2c)
MPMEMS, TEXMFINI;
suffix ‘.mem’.
(MetaPost support files, used by DMP; see dmp invocation in Web2c)
MPSUPPORT.
(Metafont source, see mf invocation in Web2c)
MFINPUTS;
suffix ‘.mf’;
dynamic creation program: mktexmf.
(Metafont program strings, see pooltype invocation in Web2c)
MFPOOL, TEXMFINI;
suffix ‘.pool’.
(MFT style file, see mft invocation in Web2c)
MFTINPUTS;
suffix ‘.mft’.
(font-related files that don’t fit the other categories)
MISCFONTS
(MlBibTeX bibliography source)
MLBIBINPUTS, BIBINPUTS, TEXBIB;
suffixes ‘.mlbib’, ‘.mlbib’.
(MlBibTeX style)
MLBSTINPUTS, BSTINPUTS;
suffixes ‘.mlbst’, ‘.bst’.
(MetaPost source, see mpost invocation in Web2c)
MPINPUTS;
suffix ‘.mp’.
(MetaPost program strings, see pooltype invocation in Web2c)
MPPOOL, TEXMFINI;
suffix ‘.pool’.
(Omega compiled process files)
OCPINPUTS;
suffix ‘.ocp’;
dynamic creation program: MakeOmegaOCP.
(Omega font metrics)
OFMFONTS, TEXFONTS;
suffixes ‘.ofm’, ‘.tfm’;
dynamic creation program: MakeOmegaOFM.
(OpenType fonts)
OPENTYPEFONTS.
(Omega property lists)
OPLFONTS, TEXFONTS;
suffix ‘.opl’.
(Omega translation process files)
OTPINPUTS;
suffix ‘.otp’.
(Omega virtual fonts)
OVFFONTS, TEXFONTS;
suffix ‘.ovf’.
(Omega virtual property lists)
OVPFONTS, TEXFONTS;
suffix ‘.ovp’.
(PDFTeX-specific configuration files)
PDFTEXCONFIG.
(packed bitmap fonts, see Glyph files in Dvips)
PROGRAMFONTS (program being ‘XDVI’, etc.),
PKFONTS, TEXPKS, GLYPHFONTS, TEXFONTS;
suffix ‘pk’;
dynamic creation program: mktexpk.
(downloadable PostScript, see Header files in Dvips)
TEXPSHEADERS, PSHEADERS;
additional suffix ‘.pro’.
(RIS bibliography files, primarily for Biber, https://ctan.org/pkg/biber)
RISINPUTS
suffix ‘.ris’.
(subfont definition files)
SFDFONTS
suffix ‘.sfd’.
(TeX source, see tex invocation in Web2c)
TEXINPUTS;
suffix ‘.tex’;
additional suffixes: none, because such a list cannot be complete;
dynamic creation program: mktextex.
(Documentation files for the TeX system)
TEXDOCS.
(Source files for the TeX system)
TEXSOURCES.
(Architecture-independent executables distributed in the texmf trees)
TEXMFSCRIPTS.
(TeX program strings, see pooltype invocation in Web2c)
TEXPOOL, TEXMFINI;
suffix ‘.pool’.
(TeX font metrics, see Metric files in Dvips)
TFMFONTS, TEXFONTS;
suffix ‘.tfm’;
dynamic creation program: mktextfm.
(Troff fonts, used by DMP; see DMP invocation in Web2c)
TRFONTS.
(TrueType outline fonts) TTFONTS; suffixes ‘.ttf’ and
‘.TTF’, ‘.ttc’ and ‘.TTC’, ‘.dfont’.
(Type 1 PostScript outline fonts, see Glyph files in Dvips)
T1FONTS, T1INPUTS, TEXPSHEADERS, DVIPSHEADERS;
suffixes ‘.pfa’, ‘.pfb’.
(Type 42 PostScript outline fonts) T42FONTS.
(virtual fonts, see Virtual fonts in Dvips)
VFFONTS, TEXFONTS;
suffix ‘.vf’.
(WEB input files)
WEBINPUTS;
suffix ‘.web’;
additional suffix ‘.ch’.
(files specific to the web2c implementation)
WEB2C.
There are two special cases, because the paths and environment variables always depend on the name of the program: the variable name is constructed by converting the program name to upper case, and then appending ‘INPUTS’. Assuming the program is called ‘foo’, this gives us the following table.
(text files used by ‘foo’)
FOOINPUTS.
(binary files used by ‘foo’)
FOOINPUTS.
If an environment variable by these names are set, the corresponding texmf.cnf definition won’t be looked at (unless, as usual, the environment variable value has an extra ‘:’). See Default expansion.
For the font variables, the intent is that:
TEXFONTS is the default for everything.
GLYPHFONTS is the default for bitmap (or, more precisely,
non-metric) files.
DVIPSFONTS for Dvipsk. Again, this is for bitmaps, not metrics.
Next: Glyph lookup, Previous: Supported file formats, Up: TeX support [Contents][Index]
This section describes how Kpathsea searches for most files (bitmap font searches are the exception, as described in the next section).
Here is the search strategy for a file name:
The order in which we search for “suffixed” name (item 1) or the “as-is” name (item 2) is controlled by the try_std_extension_first configuration value. The default set in texmf.cnf is true, since common suffixes are already recognized: ‘babel.sty’ will only look for ‘babel.sty’, not ‘babel.sty.tex’, regardless of this setting.
When the suffix is unknown (e.g., ‘foo.bar’), both names are always tried; the difference is the order in which they are tried.
try_std_extension_first only affects names being looked up which *already* have an extension. A name without an extension (e.g., ‘tex story’) will always have an extension added first.
This algorithm is implemented in the function
kpathsea_find_file in the source file
kpathsea/tex-file.c. You can watch it in action with the
debugging options (see Debugging).
Next: Suppressing warnings, Previous: File lookup, Up: TeX support [Contents][Index]
This section describes how Kpathsea searches for a bitmap font in GF or PK format (or either) given a font name (e.g., ‘cmr10’) and a resolution (e.g., 600).
Here is an outline of the search strategy (details in the sections below) for a file name at resolution dpi. The search stops at the first successful lookup.
This is implemented in kpathsea_find_glyph in
kpathsea/tex-glyph.c.
| • Basic glyph lookup | Features common to all glyph lookups. | |
| • Fontmap | Aliases for fonts. | |
| • Fallback font | Resolutions and fonts of last resort. |
Next: Fontmap, Up: Glyph lookup [Contents][Index]
When Kpathsea looks for a bitmap font name at resolution dpi in a format format, it first checks each directory in the search path for a file ‘name.dpiformat’; for example, ‘cmr10.600pk’. Kpathsea looks for a PK file first, then a GF file.
If that fails, Kpathsea looks for ‘dpidpi/name.format’; for example, ‘dpi600/cmr10.pk’. This is how fonts are typically stored on filesystems (such as DOS) that permit only three-character extensions.
If that fails, Kpathsea looks for a font with a close-enough dpi.
“Close enough” is defined by the macro KPSE_BITMAP_TOLERANCE in
kpathsea/tex-glyph.h to be dpi / 500 + 1. This is
slightly more than the 0.2% minimum allowed by the DVI standard
(CTAN:/dviware/driv-standard/level-0).
Next: Fallback font, Previous: Basic glyph lookup, Up: Glyph lookup [Contents][Index]
If a bitmap font or metric file is not found with the original name (see
the previous section), Kpathsea looks through any fontmap files
for an alias for the original font name. These files are named
texfonts.map and searched for along the TEXFONTMAPS
environment/config file variable. All texfonts.map files that
are found are read; earlier definitions override later ones.
This feature is intended to help in two respects:
The format of fontmap files is straightforward:
If an alias has an extension, it matches only those files with that extension; otherwise, it matches anything with the same root, regardless of extension. For example, an alias ‘foo.tfm’ matches only when foo.tfm is being searched for; but an alias ‘foo’ matches foo.vf, foo.600pk, etc.
As an example, here is an excerpt from the texfonts.map in the Web2c distribution. It makes the old and new names of the LaTeX circle fonts equivalent.
circle10 lcircle10 circle10 lcirc10 lcircle10 circle10 lcircle10 lcirc10 lcirc10 circle10 lcirc10 lcircle10 …
Fontmaps are implemented in the file kpathsea/fontmap.c. The Fontname distribution has much more information on font naming (see Filenames for TeX fonts).
Previous: Fontmap, Up: Glyph lookup [Contents][Index]
If a bitmap font cannot be found or created at the requested size,
Kpathsea looks for the font at a set of fallback resolutions. You
specify these resolutions as a colon-separated list (like search paths).
Kpathsea looks first for a program-specific environment variable (e.g.,
DVIPSSIZES for Dvipsk), then the environment variable
TEXSIZES, then a default specified at compilation time (the Make
variable default_texsizes). You can set this list to be empty if
you prefer to find fonts at their stated size or not at all.
Finally, if the font cannot be found even at the fallback resolutions,
Kpathsea looks for a fallback font, typically cmr10. Programs
must enable this feature by calling kpathsea_init_prog
(see Calling sequence); the default is no fallback font.
Next: mktex scripts, Previous: Glyph lookup, Up: TeX support [Contents][Index]
Kpathsea provides a way to suppress selected usually-harmless warnings;
this is useful at large sites where most users are not administrators,
and thus the warnings are merely a source of confusion, not a help. To
do this, you set the environment variable or configuration file value
TEX_HUSH to a colon-separated list of values. Here are the
possibilities:
Suppress everything possible.
Suppress mismatched font checksum warnings.
Suppress warnings when a character is missing from a font that a DVI or VF file tries to typeset.
Don’t suppress any warnings.
Suppress warnings about attempts to access a file whose permissions render it unreadable.
Suppresses warnings about an unimplemented or unparsable ‘\special’ command.
tex-hush.c defines the function that checks the variable value. Each driver implements its own checks where appropriate.
Previous: Suppressing warnings, Up: TeX support [Contents][Index]
If Kpathsea cannot otherwise find a file, for some file types it is
configured by default to invoke an external program to create it
dynamically (see mktex configuration). These are collectively
known as mktex scripts, since most of them are named
mktex....
For example, this is useful for fonts (bitmaps, TFM’s, and arbitrarily-sizable Metafont sources such as the Sauter and EC fonts), since any given document can use fonts never before referenced. Building all fonts in advance is therefore impractical, if not impossible.
It is also useful for the TeX ‘.fmt’ (and Metafont ‘.base’ and Metapost ‘.mem’ files, see Memory dumps in web2c), where pre-generating every format consumes a lot of both time and space.
The script is passed the name of the file to create and possibly other arguments, as explained below. It must echo the full pathname of the file it created (and nothing else) to standard output; it can write diagnostics to standard error.
| • config | ||
| • names | ||
| • args |
Next: mktex script names, Up: mktex scripts [Contents][Index]
The list of file types and program names that can run an external
program to create missing files is listed in the next section. In the
absence of configure options specifying otherwise, everything
but mktextex will be enabled by default. The configure
options to change the defaults are:
--without-mktexfmt-default --without-mktexmf-default --without-mktexocp-default --without-mktexofm-default --without-mktexpk-default --without-mktextfm-default --with-mktextex-default
The configure setting is overridden if the environment variable
or configuration file value named for the script is set; e.g.,
MKTEXPK (see mktex script arguments).
mktexfmt reads a file fmtutil.cnf, typically located in
texmf/web2c/ to glean its configuration information. The rest
of the files and features in this section are primarily intended for
the font generation scripts.
As distributed, all the scripts source a file texmf/web2c/mktex.cnf if it exists, so you can override various defaults. See mktex.opt, for instance, which defines the default mode, resolution, some special directory names, etc. If you prefer not to change the distributed scripts, you can simply create mktex.cnf with the appropriate definitions (you do not need to create it if you have nothing to put in it). mktex.cnf has no special syntax; it’s an arbitrary Bourne shell script. The distribution contains a sample mktex.cnf for you to copy and modify as you please (it is not installed anywhere).
In addition, you can configure a number of features with the
MT_FEATURES variable, which you can define:
If none of the options below are enabled, mktexpk,
mktextfm, and mktexmf follow the following procedure to
decide where fonts should be installed. Find the tree where the font’s
sources are, and test the permissions of the ‘fonts’ directory of
that tree to determine whether it is writable. If it is, put the files
in the tree in appropriate locations. If it isn’t writable, see whether
the tree is a system tree (named in SYSTEXMF). If so, the
VARTEXFONTS tree is used. In all other cases the working
directory is used.
The ‘appendonlydir’ option is enabled by default.
Tell mktexdir to create directories append-only, i.e., set
their sticky bit (see Mode Structure in GNU Core
Utilities). This feature is silently ignored on non-Unix platforms
(e.g. Windows/NT and MS-DOS) which don’t support similar functionality.
This feature is enabled by default.
Use 8.3 names; e.g., dpi600/cmr10.pk instead of cmr10.600pk. Note that this feature only affects filenames that would otherwise clash with other TeX-related filenames; mktex scripts do nothing about filenames which exceed the 8+3 MS-DOS limits but remain unique when truncated (by the OS) to these limits, and nether do the scripts care about possible clashes with files which aren’t related with TeX. For example, cmr10.600pk would clash with cmr10.600gf and is therefore changed when ‘dosnames’ is in effect, but mf.pool and mp.base don’t clash with any TeX-related files and are therefore unchanged.
This feature is turned on by default on MS-DOS. If you do not wish
‘dosnames’ to be set on an MS-DOS platform, you need to set the
MT_FEATURES environment variable to a value that doesn’t include
‘dosnames’. You can also change the default setting by editing
mktex.opt, but only if you use the mktex shell scripts;
the emulation programs don’t consult mktex.opt.
Instead of deriving the location of a font in the destination tree from the location of the sources, the aliases and directory names from the Fontname distribution are used. (see Introduction in Fontname).
Let mktexpk and mktextfm create metafont driver files in a temporary directory. These will be used for just one metafont run and not installed permanently.
Omit the directory level for the mode name; this is fine as long as you generate fonts for only one mode.
Omit the font supplier name directory level.
Omit the font typeface name directory level.
Omit the font supplier and typeface name directory levels. This feature is deprecated in favour of ‘stripsupplier’ and ‘striptypeface’.
When this option is enabled, fonts that would otherwise be written in
system texmf tree go to the VARTEXFONTS tree instead. The
default value in kpathsea/Makefile.in is
/var/tmp/texfonts. The Linux File System Standard
recommends /var/tex/fonts.
The ‘varfonts’ setting in MT_FEATURES is overridden by the
USE_VARTEXFONTS environment variable: if set to ‘1’, the
feature is enabled, and if set to ‘0’, the feature is disabled.
Force generated files that would go into a system tree (as defined by
SYSTEXMF) into TEXMFVAR. Starting with teTeX-3.0, the
variable TEXMFVAR is always set. The ‘varfonts’ feature takes
precedence if also set.
The ‘texmfvar’ setting in MT_FEATURES is overridden by the
USE_TEXMFVAR environment variable: if set to ‘1’, the
feature is enabled, and if set to ‘0’, the feature is disabled.
Next: mktex script arguments, Previous: mktex configuration, Up: mktex scripts [Contents][Index]
The following table shows the default name of the script for each of the file types which support runtime generation.
(‘.fmt’, ‘.base’, ‘.mem’) TeX/Metafont/MetaPost
formats. This script is also named fmtutil, and reads
fmtutil.cnf for configuration information.
(‘.mf’) Metafont input files.
(‘.ocp’) Omega compiled process files.
(‘.ofm’) Omega font metric files.
(‘pk’) Glyph fonts.
(‘.tex’) TeX input files (disabled by default).
(‘.tfm’) TFM files.
These names can be overridden by an environment variable specific
to the program—for example, DVIPSMAKEPK for Dvipsk.
If a mktex… script fails, the invocation is appended to a
file missfont.log (by default) in the current directory. You can
then execute the log file to create the missing files after fixing the
problem.
If the current directory is not writable and the environment variable or
configuration file value TEXMFOUTPUT is set, its value is
used. Otherwise, nothing is written. The name ‘missfont.log’ is
overridden by the MISSFONT_LOG environment variable or
configuration file value.
Previous: mktex script names, Up: mktex scripts [Contents][Index]
The first argument to a mktex script is always the name of the file to be created.
In the default mktexpk implementation, additional arguments may also be passed:
Sets the resolution of the generated font to num.
Sets the Metafont mode to name.
Sets the “base dpi” for the font. This must match the mode being used.
A “magstep” string suitable for the Metafont mag variable.
This must match the combination of bdpi and dpi being used.
A directory name. If the directory is absolute, it is used as-is. Otherwise, it is appended to the root destination directory set in the script.
Next: Reporting bugs, Previous: TeX support, Up: Top [Contents][Index]
This chapter is for programmers who wish to use Kpathsea. See Introduction, for the conditions under which you may do so (in short, it is released under LGPLv2.1 or later).
| • Overview | Introduction. | |
| • Calling sequence | Specifics of what to call. | |
| • Program-specific files | How to handle these. | |
| • Config | Getting info from texmf.cnf. |
Next: Calling sequence, Up: Programming [Contents][Index]
Aside from this manual, your best source of information is the source to the programs that use Kpathsea (see Introduction). First, Kpsewhich is a small utility program whose sole purpose is to exercise the main path-searching functionality. Of the drivers, Dviljk is probably the simplest full application program. Xdvik adds VF support and the complication of X resources. Dvipsk adds the complication of its own config files. Web2c is source code I also maintain, so it uses Kpathsea rather straightforwardly, but is of course complicated by the Web to C translation.
When looking at these program sources, you should know that previous
versions of the library had a different programming interface; the
current interface supports re-entrancy. Historically, the library
function names were prefixed with kpse_ instead of
kpathsea_, and they did not need an instance variable as first
argument. This change was made in 2009. The old functions will never
disappear, and can reliably continue to be used when they suffice, as
they do for the programs above. The main application using the
re-entrant API is the MetaPost library used by MetaPost and LuaTeX.
Beyond these examples, the .h files in the Kpathsea source
describe the interfaces and functionality (and of course the .c
files define the actual routines, which are the ultimate documentation).
pathsearch.h declares the basic searching routine.
tex-file.h and tex-glyph.h define the interfaces for
looking up particular kinds of files. In view of the way the headers
depend on each other, it is recommended to use #include
<kpathsea/kpathsea.h>, which includes every Kpathsea header.
If you want to include only specific headers, you should still consider including kpathsea/config.h before including any other Kpathsea header, as it provides symbols used in the other headers. Note that kpathsea/config.h includes kpathsea/c-auto.h, which is generated by Autoconf.
The library provides no way for an external program to register new file types: tex-file.[ch] must be modified to do this. For example, Kpathsea has support for looking up Dvips config files, even though no program other than Dvips will likely ever want to do so. I felt this was acceptable, since along with new file types should also come new defaults in texmf.cnf (and its descendant paths.h), since it’s simplest for users if they can modify one configuration file for all kinds of paths.
Kpathsea does not parse any formats itself; it barely opens any files. Its primary purpose is to return filenames. The GNU font utilities does contain libraries to read TFM, GF, and PK files, as do the programs above, of course.
Next: Program-specific files, Previous: Programming overview, Up: Programming [Contents][Index]
The typical way to use Kpathsea in your program goes something like this:
kpathsea_new to create a new library instance. This variable
must be passed as the first argument to all the following library functions.
The rest of this manual will be using kpse as a placeholder for
the name of this variable.
kpathsea_set_program_name with argv[0] as the second
argument; the third argument is a string or NULL. The third
argument is used by Kpathsea as the program name for the
.program feature of config files (see Config files).
If the third argument is NULL, the value of the second argument
is used. This function must be called before any other use of the
Kpathsea library.
kpathsea_set_program_name always sets the variables
kpse->invocation_name and kpse->invocation_short_name.
These variables are used in the error message macros defined in
kpathsea/lib.h. It sets the variable
kpse->program_name to the program name it uses.
It also initializes debugging options based on the environment
variable KPATHSEA_DEBUG (if that is set).
Finally, it sets the environment variables SELFAUTOLOC, SELFAUTODIR
and SELFAUTOPARENT to the location, parent and grandparent
directory of the executable, removing . and .. path
elements and resolving symbolic links. These are used in the default
configuration file to allow people to invoke TeX from anywhere. You
can use ‘kpsewhich --expand-var=\$SELFAUTOLOC’, etc., to see the
values.
kpse->debug to the number that the user supplies (as in Dviljk
and Web2c), or you can just omit this altogether (people can always set
KPATHSEA_DEBUG). If you do have runtime debugging already, you
need to merge Kpathsea’s options with yours (as in Dvipsk and Xdvik).
client_path member in
the appropriate element of the kpse->format_info array. (This
array is indexed by file type; see tex-file.h.) See
resident.c in Dvipsk for an example.
kpathsea_init_prog (see proginit.c). It’s useful for the
DVI drivers, at least, but for other programs it may be simpler to
extract the parts of it that actually apply. This does not initialize
any paths, it just looks for (and sets) certain environment variables
and other random information. (A search path is always initialized at
the first call to find a file of that type; this eliminates much useless
work, e.g., initializing the BibTeX search paths in a DVI driver.)
kpathsea_find_file after doing only the first and second of the
initialization steps above—Kpathsea automatically reads the
texmf.cnf generic config files, looks for environment variables,
and does expansions at the first lookup.
kpathsea_find_glyph, defined in
tex-glyph.h. This returns a structure in addition to the
resultant filename, because fonts can be found in so many ways. See the
documentation in the source.
kpathsea_open_file. This function takes the name to look up and a
Kpathsea file format as arguments, and returns the usual FILE *.
It always assumes the file must exist, and thus will search the disk if
necessary (unless the search path specified ‘!!’, etc.). In other
words, if you are looking up a VF or some other file that need not
exist, don’t use this.
\openout primitive; this opens
a security hole vulnerable to Trojan horse attack: an unwitting user could
run a TeX program that overwrites, say, ~/.rhosts. Analogous
security holes exist for many other programs. To alleviate this, there is a
configuration variable openout_any, which selects one of three levels
of security. When it is set to ‘a’ (for “any”), no restrictions are
imposed. When it is set to ‘r’ (for “restricted”), filenames
beginning with ‘.’ are disallowed (except .tex because LaTeX
needs it). When it is set to ‘p’ (for “paranoid”) additional
restrictions are imposed: an absolute filename must refer to a file in (a
subdirectory) of TEXMFOUTPUT, and any attempt to go up a directory
level is forbidden (that is, paths may not contain a ‘..’ component).
The paranoid setting is the default. (For backwards compatibility, ‘y’
and ‘1’ are synonyms of ‘a’, while ‘n’ and ‘0’ are
synonyms for ‘r’.) The function kpathsea_out_name_ok, with a
filename as second argument, returns true if that filename is
acceptable to be opend for output or false otherwise.
kpathsea_in_name_ok, with a filename as
second argument, returns true if that filename is acceptable to be
opend for input or false otherwise, depending on the value of the
configuration variable openin_any (with ‘a’ as default).
kpathsea_finish. This function closes any open log files and
frees the memory used by the instance.
Kpathsea also provides many utility routines. Some are generic: hash
tables, memory allocation, string concatenation and copying, string
lists, reading input lines of arbitrary length, etc. Others are
filename-related: default path, tilde, and variable expansion,
stat calls, etc. (Perhaps someday I’ll move the former to a
separate library.)
The c-*.h header files can also help your program adapt to many different systems. You will almost certainly want to use Autoconf and probably Automake for configuring and building your software if you use Kpathsea; I strongly recommend using Autoconf and Automake regardless. They are available from https://gnu.org/software.
Next: Programming with config files, Previous: Calling sequence, Up: Programming [Contents][Index]
Many programs will need to find some configuration files. Kpathsea contains some support to make it easy to place them in their own directories. The Standard TeX directory structure (see Introduction in A Directory Structure for TeX files), specifies that such files should go into a subdirectory named after the program, like ‘texmf/ttf2pk’.
Two formats, ‘kpse_program_text_format’ and
‘kpse_program_binary_format’, use .:$TEXMF/program//
as their compiled-in search path. To override this default, you can
use the variable PROGRAMINPUTS in the environment and/or
‘texmf.cnf’. That is to say, the name of the variable is
constructed by converting the name of the program to upper case, and
appending INPUTS.
The only difference between these two formats is whether
kpathsea_open_file will open the files it finds in text or binary
mode.
Previous: Program-specific files, Up: Programming [Contents][Index]
You can (and probably should) use the same texmf.cnf
configuration file that Kpathsea uses for your program. This helps
installers by keeping all configuration in one place.
To retrieve a value for a configuration variable var, the best
way is to call kpathsea_var_value on the string
var. This will look first for an environment variable
var, then a config file value. The result will be the value
found or ‘NULL’. This function is declared in
kpathsea/variable.h. For an example, see the
shell_escape code in web2c/lib/texmfmp.c.
The routine to do full variable and tilde expansion of an arbitrary
string in the context of a search path (as opposed to simply
retrieving a value) is kpathsea_var_expand, also declared in
kpathsea/variable.h. However, it’s generally only necessary to
set the search path structure components as explained in the previous
section instead of using this directly. Because of its usage with any
input string, undefined $FOO constructs in the argument to
kpathsea_var_expand are returned literally ("$FOO"),
while undefined ${FOO} constructs are expanded to the empty
string.
If for some reason you want to retrieve a value only from a
config file, not automatically looking for a corresponding environment
variable, call kpathsea_cnf_get (declared in kpathsea/cnf.h)
with the string var.
No initialization calls are needed.
Next: Index, Previous: Programming, Up: Top [Contents][Index]
If you have problems or suggestions, please report them to tex-k@tug.org using the bug checklist below.
Please report bugs in the documentation; not only factual errors or inconsistent behavior, but unclear or incomplete explanations, typos, wrong fonts, …
| • Bug checklist | What to include in a good bug report. | |
| • Mailing lists | Joining the bugs or announcements mailing lists. | |
| • Debugging | Analyzing runtime problems. | |
| • Logging | Recording searches. | |
| • Common problems | When things go wrong. |
Next: Mailing lists, Up: Reporting bugs [Contents][Index]
Before reporting a bug, please check below to be sure it isn’t already known (see Common problems).
Bug reports should be sent via electronic mail to tex-k@tug.org.
The general principle is that a good bug report includes all the information necessary for reproduction. Therefore, to enable investigation, your report should include the following:
make program you are using (the output of uname -a is a
start on the first two, though incomplete).
configure. This is recorded in the
config.status files.
If you are reporting a bug in ‘configure’ itself, it’s probably
system-dependent, and it will be unlikely the maintainers can do
anything useful if you merely report that thus-and-such is broken.
Therefore, you need to do some additional work: for some bugs, you can
look in the file config.log where the test that failed should
appear, along with the compiler invocation and source program in
question. You can then compile it yourself by hand, and discover why
the test failed. Other ‘configure’ bugs do not involve the
compiler; in that case, the only recourse is to inspect the
configure shell script itself, or the Autoconf macros that
generated configure.
KPATHSEA_DEBUG
to ‘-1’ before running the program. Please look at the log
yourself to make sure the behavior is really a bug before reporting it;
perhaps “old” environment variable settings are causing files not to
be found, for example.
NULL value being dereferenced, for
example), please send the details along. If the program involved is
TeX or Metafont, and the crash is happening at apparently-sound
code, however, the bug may well be in the compiler, rather than in the
program or the library (see TeX or
Metafont failing).
Next: Debugging, Previous: Bug checklist, Up: Reporting bugs [Contents][Index]
Web2c and Kpathsea in general are discussed on the mailing list tex-k@tug.org. You can subscribe and peruse the archives on the web https://lists.tug.org/tex-k.
You do not need to join to submit a report, nor will it affect whether you get a response. Be aware that large data files are sometimes included in bug reports. If this is a problem for you, do not join the list.
If you are looking for general TeX help, such as how to install a full TeX system or how to use LaTeX, please see https://tug.org/begin.html.
Next: Logging, Previous: Mailing lists, Up: Reporting bugs [Contents][Index]
Kpathsea provides a number of runtime debugging options, detailed below by their names and corresponding numeric values. When the files you expect aren’t being found, the thing to do is enable these options and examine the output.
You can set these with some runtime argument (e.g., ‘-d’) to the program; in that case, you should use the numeric values described in the program’s documentation (which, for Dvipsk and Xdvik, are different than those below). It’s best to give the ‘-d’ (or whatever) option first, for maximal output. Dvipsk and Xdvik have additional program-specific debugging options as well.
You can also set the environment variable KPATHSEA_DEBUG; in this
case, you should use the numbers below. If you run the program under a
debugger and set the instance variable kpse->debug, also use the numbers
below.
In any case, by far the simplest value to use is ‘-1’, which will turn on all debugging output. This is usually better than guessing which particular values will yield the output you need.
Debugging output always goes to standard error, so you can redirect it easily. For example, in Bourne-compatible shells:
dvips -d -1 … 2>/tmp/debug
It is sometimes helpful to run the standalone Kpsewhich utility (see Invoking kpsewhich), instead of the original program.
In any case, you cannot use the names below; you must always use somebody’s numbers. (Sorry.) To set more than one option, just sum the corresponding numbers.
KPSE_DEBUG_STAT (1)
Report ‘stat’(2) calls. This is useful for verifying that your directory structure is not forcing Kpathsea to do many additional file tests (see Slow path searching, and see Subdirectory expansion). If you are using an up-to-date ls-R database (see Filename database), this should produce no output unless a nonexistent file that must exist is searched for.
KPSE_DEBUG_HASH (2)
Report lookups in all hash tables: ls-R and aliases (see Filename database); font aliases (see Fontmap); and config file values (see Config files). Useful when expected values are not being found, e.g.., file searches are looking at the disk instead of using ls-R.
KPSE_DEBUG_FOPEN (4)
Report file openings and closings. Especially useful when your system’s file table is full, for seeing which files have been opened but never closed. In case you want to set breakpoints in a debugger: this works by redefining ‘fopen’ (‘fclose’) to be ‘kpse_fopen_trace’ (‘kpse_fclose_trace’).
KPSE_DEBUG_PATHS (8)
Report general path information for each file type Kpathsea is asked to
search. This is useful when you are trying to track down how a
particular path got defined—from texmf.cnf, config.ps,
an environment variable, the compile-time default, etc. This is the
contents of the kpse_format_info_type structure defined in
tex-file.h.
KPSE_DEBUG_EXPAND (16)
Report the directory list corresponding to each path element Kpathsea searches. This is only relevant when Kpathsea searches the disk, since ls-R searches don’t look through directory lists in this way.
KPSE_DEBUG_SEARCH (32)
Report on each file search: the name of the file searched for, the path searched in, whether or not the file must exist (when drivers search for cmr10.vf, it need not exist), and whether or not we are collecting all occurrences of the file in the path (as with, e.g., texmf.cnf and texfonts.map), or just the first (as with most lookups). This can help you correlate what Kpathsea is doing with what is in your input file.
KPSE_DEBUG_VARS (64)
Report the value of each variable Kpathsea looks up. This is useful for verifying that variables do indeed obtain their correct values.
GSFTOPK_DEBUG (128)
Activates debugging printout specific to gsftopk program.
MAKETEX_DEBUG (512)
If you use the optional mktex programs instead of the
traditional shell scripts, this will report the name of the site file
(mktex.cnf by default) which is read, directories created by
mktexdir, the full path of the ls-R database built by
mktexlsr, font map searches, MT_FEATURES in effect,
parameters from mktexnam, filenames added by
mktexupd, and some subsidiary commands run by the programs.
MAKETEX_FINE_DEBUG (1024)
When the optional mktex programs are used, this will print
additional debugging info from functions internal to these programs.
Debugging output from Kpathsea is always written to standard error, and
begins with the string ‘kdebug:’. (Except for hash table buckets,
which just start with the number, but you can only get that output
running under a debugger. See comments at the hash_summary_only
variable in kpathsea/db.c.)
Next: Common problems, Previous: Debugging, Up: Reporting bugs [Contents][Index]
Kpathsea can record the time and filename found for each successful search. This may be useful in finding good candidates for deletion when your filesystem is full, or in discovering usage patterns at your site.
To do this, define the environment or config file variable
TEXMFLOG. The value is the name of the file to append the
information to. The file is created if it doesn’t exist, and appended
to if it does.
Each successful search turns into one line in the log file: two words
separated by a space. The first word is the time of the search, as the
integer number of seconds since “the epoch”, i.e., UTC midnight 1
January 1970 (more precisely, the result of the time system
call). The second word is the filename.
For example, after setenv TEXMFLOG /tmp/log, running Dvips on
story.dvi appends the following lines:
774455887 /usr/local/share/texmf/dvips/config.ps 774455887 /usr/local/share/texmf/dvips/psfonts.map 774455888 /usr/local/share/texmf/dvips/texc.pro 774455888 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmbx10.600pk 774455889 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmsl10.600pk 774455889 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmr10.600pk 774455889 /usr/local/share/texmf/dvips/texc.pro
Only filenames that are absolute are recorded, to preserve some semblance of privacy.
In addition to this Kpathsea-specific logging, pdftex
provides an option -recorder to write the names of all files
accessed during a run to the file basefile.fls.
Finally, most systems provide a general tool to output each system
call, thus including opening and closing files. It might be named
strace, truss, struss, or something
else.
Previous: Logging, Up: Reporting bugs [Contents][Index]
Here are some common problems with configuration, compilation, linking, execution, …
| • Unable to find files | If your program can’t find fonts (or whatever). | |
| • Slow path searching | If it takes forever to find anything. | |
| • Unable to generate fonts | If mktexpk fails. | |
| • TeX or Metafont failing | Likely compiler bugs. |
Next: Slow path searching, Up: Common problems [Contents][Index]
If a program complains it cannot find fonts (or other input files), any of several things might be wrong. In any case, you may find the debugging options helpful. See Debugging.
Unfortunately, Kpathsea’s subdirectory searching has an irremediable deficiency: If a directory d being searched for subdirectories contains plain files and symbolic links to other directories, but no true subdirectories, d will be considered a leaf directory, i.e., the symbolic links will not be followed. See Subdirectory expansion.
You can work around this problem by creating an empty dummy subdirectory in d. Then d will no longer be a leaf, and the symlinks will be followed.
The directory immediately followed by the ‘//’ in the path specification, however, is always searched for subdirectories, even if it is a leaf. Presumably you would not have asked for the directory to be searched for subdirectories if you didn’t want it to be.
mktexpk (or
mktexmf or mktextfm) will try to create them. If
these rather complicated shell scripts fail, you’ll eventually get an
error message saying something like ‘Can't find font
fontname’. The best solution is to fix (or at least report) the
bug in mktexpk; the workaround is to generate the necessary
fonts by hand with Metafont, or to grab them from a CTAN site
(see unixtex.ftp).
Next: Unable to generate fonts, Previous: Unable to find files, Up: Common problems [Contents][Index]
If your program takes an excessively long time to find fonts or other input files, but does eventually succeed, here are some possible culprits:
It is best to have only directories (and perhaps a README) in the upper levels of the directory structure, and it’s very important to have only files, and no subdirectories, in the leaf directories where the dozens of TFM, PK, or whatever files reside.
In any case, you may find the debugging options helpful in determining precisely when the disk or network is being pounded. See Debugging.
Next: TeX or Metafont failing, Previous: Slow path searching, Up: Common problems [Contents][Index]
Metafont outputs fonts in bitmap format, tuned for a particular device at a particular resolution, in order to allow for the highest-possible quality of output. Some DVI-to-whatever programs, such as Dvips, try to generate these on the fly when they are needed, but this generation may fail in several cases.
If mktexpk runs, but fails with this error:
mktexpk: Can't guess mode for nnn dpi devices. mktexpk: Use a config file to specify the mode, or update me.
you need to ensure the resolution and mode match; just
specifying the resolution, as in -D 360, is not enough.
You can specify the mode name with the -mode option on the
Dvips command line, or in a Dvips configuration file (see Config
files in Dvips), such as config.ps in your document
directory, ~/.dvipsrc in your home directory, or in a system
directory (again named config.ps). (Other drivers use other
files, naturally.)
For example, if you need 360dpi fonts, you could include this in a configuration file:
D 360 M lqmed
If Metafont runs, but generates fonts at the wrong resolution or for
the wrong device, most likely mktexpk’s built-in guess for the
mode is wrong, and you should override it as above.
See https://ctan.org/pkg/modes for a list of resolutions and mode names for most devices (additional submissions are welcome).
If Metafont runs but generates fonts at a resolution of 2602dpi
(and prints out the name of each character as well as just a character
number, and maybe tries to display the characters), then your Metafont
base file probably hasn’t been made properly. (It’s using the default
proof mode, instead of an actual device mode.) To make a proper
plain.base, assuming the local mode definitions are contained in
a file modes.mf, run the following command (assuming Unix):
inimf "plain; input modes; dump"
Then copy the plain.base file from the current directory to where the base files are stored on your system (/usr/local/share/texmf/web2c by default), and make a link (either hard or soft) from plain.base to mf.base in that directory. See inimf invocation in Web2c.
If mf is a command not found at all by mktexpk, then you
need to install Metafont (see unixtex.ftp).
Previous: Unable to generate fonts, Up: Common problems [Contents][Index]
If TeX or Metafont get a segmentation fault or otherwise fail while running a normal input file, the problem is usually a compiler bug (unlikely as that may sound). Even if the trip and trap tests are passed, problems may lurk. Optimization occasionally causes trouble in programs other than TeX and Metafont themselves, too.
For a workaround, if you enabled any optimization flags, it’s best to omit optimization entirely. In any case, the way to find the facts is to run the program under the debugger and see where it’s failing.
Also, if you have trouble with a system C compiler, I advise trying the GNU C compiler. And vice versa, unfortunately; but in that case I also recommend reporting a bug to the GCC mailing list; see Bugs in Using and Porting GNU CC.
To report compiler bugs effectively requires perseverance and perspicacity: you must find the miscompiled line, and that usually involves delving backwards in time from the point of error, checking through TeX’s (or whatever program’s) data structures. Good luck.
Previous: Reporting bugs, Up: Top [Contents][Index]
| Jump to: | !
$
-
.
/
2
8
:
;
=
\
{
~
A B C D E F G H I K L M N O P Q R S T U V W X Z |
|---|
| Jump to: | !
$
-
.
/
2
8
:
;
=
\
{
~
A B C D E F G H I K L M N O P Q R S T U V W X Z |
|---|