This is tlbuild.info, produced by makeinfo version 6.7 from tlbuild.texi. This file documents the TeX Live build system and more. Copyright (C) 2016-2020 Karl Berry. Copyright (C) 2013-2015 Karl Berry & Peter Breitenlohner. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the TeX Users Group. INFO-DIR-SECTION TeX START-INFO-DIR-ENTRY * TLbuild: (tlbuild). TeX Live configuration and development. END-INFO-DIR-ENTRY INFO-DIR-SECTION Individual utilities START-INFO-DIR-ENTRY * install-tl:: Installing TeX Live. * tlmgr:: Managing TeX Live. END-INFO-DIR-ENTRY  File: tlbuild.info, Node: Top, Next: Introduction, Up: (dir) Building TeX Live (2020) ************************ For an overview of this manual, *note Introduction::. * Menu: * Introduction:: About this manual. * Overview of build system:: The TeX Live build system. * Prerequisites:: Requirements for building TeX Live. * Building:: The overall build process. * Installing:: How and where installation happens (or not). * Layout and infrastructure:: Autoconf macros, etc., in detail. * Configure options:: List of all configure options. * Coding conventions:: Conventions to follow. * Continuous integration:: Automated build testing. * install-tl:: The TeX Live installer. * tlmgr:: The native TeX Live package manager. * Index:: General index.  File: tlbuild.info, Node: Introduction, Next: Overview of build system, Prev: Top, Up: Top 1 Introduction ************** This manual (dated March 2020) corresponds to the TeX Live 2020 release. This manual is aimed at system installers and programmers, and focuses on how to configure, build, and develop the TeX Live (TL) sources. It is also available as plain text files in the source tree: 'source/README.*'. The main 'source/README' file in the TL source tree provides maximally-terse information for doing a build, and portability information for different systems, along with 'source/doc/README.solaris'. For information on acquiring the TL sources, see . The canonical source repository uses Subversion, and we have no plans to change this. This manual does not duplicate the information found in other TL documentation resources, such as: * The TeX Live web pages: . * The web page describing how to build the binaries which are distributed with TeX Live: . * The TeX Live user manual: , or run 'texdoc texlive'. * Other TeX-related Texinfo manuals (*note (web2c)::, *note (kpathsea)::, etc.): , or check the 'TeX' category in the GNU Info system. * Package documentation: , or the 'doc.html' file at the top level of the installed TL. As an exception, the full documentation for 'install-tl' and 'tlmgr' is included here as appendices, simply because it is easy to do so. The same text is available online (linked from , or by invoking the program with '--help' (or look at the end of the source).  File: tlbuild.info, Node: Overview of build system, Next: Prerequisites, Prev: Introduction, Up: Top 2 Overview of build system ************************** The TeX Live build system was redesigned in 2009 to consistently use Autoconf, Automake, and Libtool. Thus, running 'configure && make && make check && make install' or the essentially-equivalent top-level 'Build' script suffices to build and install the TL programs. The 'make check' clause performs various tests of the generated programs--not strictly required but strongly recommended. Running 'configure --help' will display a comprehensive list of all 'configure' options. The main components of the TL build system are: 'libs/LIB' Generic libraries. 'texk/LIB' TeX-specific libraries in subdirectories, notably LIB='kpathsea'. (The other one is 'texk/ptexenc'.) 'texk/PROG' TeX-specific programs (that use Kpathsea). 'utils/PROG' Other programs (that don't use Kpathsea). The primary design goal of the build system is modularity. Each program and library module (or package) specifies its own requirements and properties, such as required libraries, whether an installed (system) version of a library can be used, 'configure' options to be seen at the top level, and more. An explicit list of all available modules is kept in a single central place: 'm4/kpse-pkgs.m4'. A second, related goal is to configure and build each library before configuring any other (program or library) module which uses that library. This allows checking for properties and features of a library built as part of the TL tree in much the same way as for a system version of that library. All generic libraries and several programs are maintained independently. The corresponding modules use (most of) the distributed source tree and document any modifications of that source. All this is for the sake of simplifying both upgrading of modules and integrating new modules into the TL build system. (Despite all efforts, neither task is easy.)  File: tlbuild.info, Node: Prerequisites, Next: Building, Prev: Overview of build system, Up: Top 3 Prerequisites *************** Overall, building the TeX Live programs, when using all libraries from the TL source tree, requires C and C++11 compilers and GNU 'make'. If 'make' from your 'PATH' is not GNU make, you can set the 'MAKE' environment variable to whatever is necessary. GNU 'make' is required only because of some third-party libraries, notably FreeType; all the TL-maintained directories (and Automake/Autoconf output in general) work with any reasonable 'make'. A C++11 compiler is similarly required because of the third-party libraries ICU and Poppler; the program 'dvisvgm' also requires C++11. It is possible to build everything else with older compilers, but you have to remove the C++11-dependent sources. *Note Build one package::. A few programs in the tree have additional requirements: 'web2c' requires 'perl' for some tests run by 'make check'. 'xdvik' 'xpdfopen' require X11 headers and libraries, typically in "development" packages that are not installed by default. 'xetex' requires 'fontconfig' (again both headers and library), or, for MacOSX only, the 'ApplicationServices' and 'Cocoa' frameworks. 'xindy' requires GNU 'clisp', 'libsigsegv', and 'libiconv'; additionally, to build the rules and/or documentation: 'perl', 'latex', 'pdflatex'. Lacking the required tools, building these programs must avoided, e.g., 'configure --without-x --disable-xetex --disable-xindy' Modifying source files induces more requirements, as one might expect: * Modification of any '.y' or '.l' source files requires 'bison' or 'flex' to update the corresponding C sources. * Modification of the sources for '.info' files requires 'makeinfo'. * Modification of any part of the build system (M4 macros, 'configure.ac', 'Makefile.am', or their fragments) requires GNU M4, GNU Autoconf, GNU Automake, and GNU Libtool to update the generated files. Furthermore, to reliably reproduce the build files, the original GNU releases of these tools must be used, not any distro packaging of them. *Note Build system tools::, for more discussion. If you haven't modified any source files, and infrastructure tools such as 'autoconf' or 'makeinfo' are still being run, check your timestamps--notably, 'use-commit-times' must be set to 'yes' in your Subversion configuration (*note Build system tools::). Barring buggy commits, no infrastructure tools are needed to do a normal build.  File: tlbuild.info, Node: Building, Next: Installing, Prev: Prerequisites, Up: Top 4 Building ********** The top-level 'Build' script is intended to simplify building the binaries distributed with TeX Live itself--we call this the "native" TL build. It runs 'configure && make world', which builds everything in a subdirectory of the main source tree (default 'Work/'), installs everything in another subdirectory (default 'inst/'), and finally runs 'make check'. The exact directory and command names can be specified via environment variables and a few leading options. All remaining arguments (assignments or options) are passed to the 'configure' script. Please take a look at the './Build' source file for more information; it is a straightforward shell script. An alternative, and the one we will mainly discuss here, is to run 'configure' and 'make' in a suitable empty subdirectory. Building in the source directory itself is not supported (sorry). * Menu: * Build iteration:: What 'configure' and 'make' do in TL. * Build problems:: If the build fails. * Build in parallel:: Simultaneous 'make' processes. * Build distribution:: Making a distribution tarball. * Build one package:: Example of working on just one program. * Build one engine:: Example of building just one TeX engine. * Cross compilation:: Building on host X for target Y.  File: tlbuild.info, Node: Build iteration, Next: Build problems, Up: Building 4.1 Build iteration =================== Running the top-level 'configure' script configures the top level and the subdirectories 'libs', 'utils', and 'texk'. Running 'make' at the top level first iterates over the TeX-specific libraries, and then runs 'make' in 'libs', 'utils', and 'texk' to iterate over the generic libraries, utility programs, and TeX-specific programs, respectively. These iterations consist of two steps: 1. For each library or program module not yet configured, run 'configure', adding the configure option '--disable-build' if the module need not be built, otherwise running 'make all'. 2. For each library or program module that must be built, run 'make' for the selected target(s): 'default' or 'all' to (re-)build, 'check' to run tests, 'install', etc. Running the top-level 'make' a second time iterates again over all the library and program modules, and finds (should find) nothing to be done.  File: tlbuild.info, Node: Build problems, Next: Build in parallel, Prev: Build iteration, Up: Building 4.2 Build problems ================== If configuring or building a module fails, you should first try to find and fix the problem. Failing that, a possible workaround is to remove the subdirectory for that module from the build tree (so 'configure' won't try to run there, and finally rerun the top level 'make' (or './Build' '--no-clean').  File: tlbuild.info, Node: Build in parallel, Next: Build distribution, Prev: Build problems, Up: Building 4.3 Build in parallel ===================== The TL build system carefully formulates dependencies as well as 'make' rules when a tool (such as 'tangle', 'ctangle', and 'convert') creates several output files. This allows for parallel builds ('make -j N' with N>1 or even 'make -j') that can considerably speed up the TL build. Incidentally, a noticeable speed-up can be independently gained by using a configure cache file, i.e., specifying the 'configure' option '-C' (recommended).  File: tlbuild.info, Node: Build distribution, Next: Build one package, Prev: Build in parallel, Up: Building 4.4 Build distribution ====================== Running 'make dist' at the top level creates a tarball 'tex-live-YYYY-MM-DD.tar.xz' from the TL source tree. Running 'make distcheck' also verifies that this tarball suffices to build and install all of TL. This is useful for checking consistency of the source tree and Makefiles, but the result is not a complete or even usable TeX system, since all the support files are lacking; *note Installing::. We do not actually distribute any such tarball, and have no plans to do so.  File: tlbuild.info, Node: Build one package, Next: Build one engine, Prev: Build distribution, Up: Building 4.5 Build one package ===================== To build one package, the basic idea is to use the 'configure' option '--disable-all-pkgs' (*note --disable-all-pkgs::). Then all program and library modules are configured but none are made. However, the 'Makefile's still contain all build rules and dependencies and can be invoked to build an individual program or library, first building any required libraries. Here is an example from start to finish for working on 'dvipdfm-x'. (Unfortunately, this does not suffice for building one, or a subset, of the TeX engines; see the next section.) mkdir mydir && cd mydir # new working directory # Get sources (), e.g.: rsync -a --delete --exclude=.svn --exclude=Work \ tug.org::tldevsrc/Build/source/ . # Create build directory: mkdir Work && cd Work # Do the configure: ../configure --disable-all-pkgs --enable-dvipdfm-x \ -C CFLAGS=-g CXXFLAGS=-g >&outc || echo fail # Do the make: make >&outm || echo fail # Test: cd texk/dvipdfm-x make check Then you can modify source files in 'mydir/texk/dvipdfm-x' and rerun 'make' in 'mydir/Work/texk/dvipdfm-x' to rebuild; that build directory is where the binary ends up and where you can run a debugger, etc. The second line of the 'configure' invocation shows examples of extra things you likely want to specify if you intend to hack the sources (and not just build binaries): the '-C' speeds 'configure' by enabling a cache file, and the 'CFLAGS' and 'CXXFLAGS' settings eliminate compiler optimization for debugging purposes. Of course, you need to actually look at the output and check that things are working. There are many 'configure' options you can tweak as desired; check the output from 'configure --help'. It is also a good idea to run 'make check' after making any changes, to ensure that whatever tests have been written still pass. Finally, the above retrieves the entire TL source tree (several hundred megabytes). It is natural to ask if this is really necessary. Strictly speaking, the answer is no, but it is vastly more convenient to do so. If you cut down the source tree, you must also give additional 'configure' flags to individually disable using system versions of libraries, or the intricacies of the dependencies (such as 'teckit' requiring 'zlib') will have undesired side effects. For an example of this approach, see the 'build-pdftex.sh' script in the 'pdftex' development source (details at ), which is indeed such a cut-down TL source tree. Some libraries and programs require C++11. If you want to build with an older compiler lacking such support, you need to (re)move those source directories; specifying '--disable' for them does not suffice, unfortunately. Specifically, before running 'configure': rm -rf libs/icu libs/poppler libs/graphite2 texk/dvisvgm Also, even with '--disable-all-pkgs', dependencies are (currently) checked. For instance, if a (non-MacOSX) system does not have 'fontconfig', XeTeX cannot be built (*note Prerequisites::), and 'configure' will terminate even with '--disable-xetex'. To proceed without such dependencies, specify '--enable-missing' also. (Patches to improve this would be most welcome.) By default, the 'gcc' compilers will be used if present; otherwise, individual packages may use something different. You can explicitly specify the compilers to be used with the environment variables 'CC', 'CXX', and 'OBJCXX'.  File: tlbuild.info, Node: Build one engine, Next: Cross compilation, Prev: Build one package, Up: Building 4.6 Build one engine ==================== Unfortunately, there is one common case where the steps in the preceding section to build one package (*note Build one package::) do not suffice: wanting to build one, or a subset, of the TeX engines (or other Web2c programs). The simplest way to do this is to disable everything and then explicitly specify what to make. For example, to build only LuaTeX: ./configure --disable-all-pkgs # or ./Build cd Work/texk/web2c # build directory make luatex # specify target This works because the 'make' automatically runs 'configure' as necessary for the dependencies and target. Furthermore, the source tree can be cut down to just what is needed for the given engine (the separate pdfTeX and LuaTeX source repositories do this, if you want to peruse examples). We hope to improve the situation in the future. Patches are welcome.  File: tlbuild.info, Node: Cross compilation, Prev: Build one engine, Up: Building 4.7 Cross compilation ===================== In a cross compilation a "build" system is used to create binaries to be executed on a "host" system with different hardware and/or operating system. In simple cases, the build system can execute binaries for the host system. This typically occurs for bi-arch systems where, e.g., 'i386-linux' binaries can run on 'x86_64-linux' systems and 'win32' binaries can run on 'win64' systems. Although sometimes called "native cross", technically this is not cross compilation at all. In most such cases it suffices to specify suitable compiler flags. It might be useful to add the configure option '--build=HOST' to get the correct canonical host name, but note that this should _not_ be '--host=HOST' (*note (autoconf)Hosts and Cross-Compilation::). In order to build, e.g., 32-bit binaries with 'clang' on a 64-bit MacOSX system one could use: TL_BUILD_ENV="CC='clang -arch i386' \ CXX='clang++ -arch i386' \ OBJCXX='clang++ -arch i386'" \ ./Build --build=i386-apple-darwin * Menu: * Cross configuring:: Configuring for cross compilation. * Cross problems:: Cross compilation problems.  File: tlbuild.info, Node: Cross configuring, Next: Cross problems, Up: Cross compilation 4.7.1 Cross configuring ----------------------- In a standard cross compilation, binaries for the host system cannot execute on the build system and it is necessary to specify the configure options '--host=HOST' and '--build=BUILD' with two different values. Building binaries requires suitable "cross" tools, e.g., compiler, linker, and archiver, and perhaps a "cross" version of 'pkg-config' and similar to locate host system libraries. Autoconf expects that these cross tools are given by their usual variables or found under their usual name prefixed with 'HOST-'. Here a list of such tools and corresponding variables: ar AR freetype-config FT2_CONFIG g++ CXX gcc CC icu-config ICU_CONFIG objdump OBJDUMP pkg-config PKG_CONFIG ranlib RANLIB strip STRIP In order to, e.g., build 'mingw32' binaries on 'x86_64-linux' with a cross compiler found as 'i386-pc-mingw32-gcc' one would specify --host=i386-pc-mingw32 --build=x86_64-linux-gnu or perhaps --host=mingw32 --build=x86_64-linux CC=i386-pc-mingw32-gcc but this latter, especially, might require adding 'CXX' and others. Configure arguments such as 'CFLAGS=...' refer to the cross compiler. If necessary, you can specify compilers and flags for the few auxiliary C and C++ programs required for the build process as configure arguments BUILDCC=... BUILDCPPFLAGS=... BUILDCFLAGS=... BUILDCXX=... BUILDCXXFLAGS=... BUILDLDFLAGS=...  File: tlbuild.info, Node: Cross problems, Prev: Cross configuring, Up: Cross compilation 4.7.2 Cross problems -------------------- The fact that binaries for the host system cannot be executed on the build system causes some problems. One problem is that configure tests using 'AC_RUN_IFELSE' can compile and link the test program but cannot execute it. Such tests should be avoided if possible and otherwise must supply a pessimistic test result. Another problem arises if the build process must execute some (auxiliary or installable) programs. Auxiliary programs can be placed into a subdirectory that is configured natively as is done for 'texk/web2c/web2c', 'texk/dvipsk/squeeze', and 'texk/xdvik/squeeze'. The module 'libs/freetype2' uses the value of 'CC_BUILD', 'BUILD-gcc', 'gcc', or 'cc' as the compiler for the auxiliary program. The situation for installable programs needed by the build process is somewhat different. A rather expensive possibility, chosen for the ICU libraries in module 'libs/icu', is to first compile natively for the build system and in a second step to use these (uninstalled) programs during the cross compilation. This approach would also be possible for the tools such as 'tangle' used in the module 'texk/web2c' to build the WEB programs, but that would require first building a native 'kpathsea' library. To avoid this complication, cross compilation of programs written in (C)WEB requires sufficiently recent installed versions of 'tangle', 'ctangle', 'otangle', and 'tie'. Building 'xindy' requires running the host system 'clisp' binary, thus cross compilation is painful, but possible.  File: tlbuild.info, Node: Installing, Next: Layout and infrastructure, Prev: Building, Up: Top 5 Installing ************ This section discusses the results of 'make install' in the source tree. The main consideration is that 'make install' is not enough to make a usable TeX installation. Beyond the compiled binaries, (thousands of) support files are needed; just as a first example, 'plain.tex' is not in the source tree. These support files are maintained completely independently and are not present in the TL source tree. The best basis for dealing with them is the TeX Live (plain text) database in 'Master/tlpkg/texlive.tlpdb', and/or the TeX Live installer, 'install-tl'. More information is under 'Master/tlpkg' and at . * Menu: * Installation directories:: The prefix, 'bindir', etc., directories. * Linked scripts:: Scripts not maintained in the sources. * Distro builds:: Configuring and building for OS distributions.  File: tlbuild.info, Node: Installation directories, Next: Linked scripts, Up: Installing 5.1 Installation directories ============================ Running 'make install' (or 'make install-strip') installs executables in 'BINDIR', libraries in 'LIBDIR', headers in 'INCLUDEDIR', general data (including "linked scripts", *note Linked scripts::) in 'DATAROOTDIR/texmf-dist', man pages in 'MANDIR', and Info files in 'INFODIR'. The values of these directories are determined by 'configure' and can be specified explicitly as options such as '--prefix=PREFIX' or '--bindir=BINDIR'; otherwise, they are given by their usual Autoconf defaults: PREFIX /usr/local EXEC_PREFIX PREFIX BINDIR EXEC_PREFIX/bin LIBDIR EXEC_PREFIX/lib INCLUDEDIR PREFIX/include DATAROOTDIR PREFIX/share MANDIR DATAROOTDIR/man INFODIR DATAROOTDIR/info except possibly modified as follows: * If the option '--enable-multiplatform' is given, '/PLATFORM' (i.e., the canonical platform name) is appended to 'BINDIR' and 'LIBDIR'. This is implied for a native TL build. * In a native TL build, 'DATAROOTDIR' is set to 'PREFIX', 'INFODIR' is set to 'PREFIX/texmf-dist/doc/info', and 'MANDIR' to 'PREFIX/texmf-dist/doc/man', corresponding to the directories used in the TL distribution. The top-level 'configure' script displays all these installation paths. For the native TL build, the 'Build' script leaves the binaries in './inst/bin/STD-SYSTEM-TRIPLET'. The new binaries are not directly usable from that location; they need to be copied to 'Master/bin/TL-PLATFORM'. The other files and directories that end up in './inst/' are ignored.  File: tlbuild.info, Node: Linked scripts, Next: Distro builds, Prev: Installation directories, Up: Installing 5.2 Linked scripts ================== Quite a few executables are architecture-independent shell, Perl, or other interpreted scripts, rather than compiled binaries. A few are maintained as part of the TL source tree, but most are maintained elsewhere with copies under 'texk/texlive/linked_scripts'. These so-called "linked scripts" are installed under 'DATAROOTDIR/texmf-dist/scripts'; for Unix-like systems a symbolic link is made in 'BINDIR'. For example, a symlink points from 'BINDIR/ps2eps' to 'DATAROOTDIR/texmf-dist/scripts/ps2eps/ps2eps.pl'. For Windows, a standard wrapper binary (copied to, e.g., 'BINDIR/ps2eps.exe') serves the same purpose. The source for the wrapper is in 'texk/texlive/w32_wrapper'. One reason for this is to avoid having many copies of the same script; a more important reason is that it guarantees the scripts will stay in sync across the different supported operating systems. Most important of all, we want the 'BINDIR' resulting from the build to be as close as possible to what is in the TL distribution. At present, there are a few exceptions--Asymptote, Biber, Xindy--and each one creates considerable extra work. We don't want to add more. (See for information about building those exceptions, as well as the 'xz' and 'wget' programs that are used in the TL infrastructure.)  File: tlbuild.info, Node: Distro builds, Prev: Linked scripts, Up: Installing 5.3 Distro builds ================= Although they use the same code base, building for the native TL distribution as shipped by the TeX user groups is typically quite different from a "distro" build needed by, e.g., a full GNU/Linux or BSD operating system distribution. The native TL distribution uses shared libraries only when absolutely necessary ('libc', 'libm', X11 libraries, and 'libfontconfig'). In contrast, a distro typically wants to use as many shared libraries as possible from elsewhere on the system, including TeX-specific libraries such as 'libkpathsea' (even though Kpathsea has never officially been released as a shared library). In addition, the installation paths will, in general, be completely different. Here are the 'configure' options that distro builds are likely to find most relevant: '--disable-native-texlive-build' This must be specified to avoid interference from the many tweaks we do for the native TL build. '--with-banner-add=/SOMEDISTRO' This isn't technically required, but is strongly recommended, so your build and your distro can be distinguished from others. '--enable-shared' Build shared versions of the TeX-specific libraries (uses 'libtool'). '--disable-static' Do not build the static versions of the TeX-specific libraries. '--with-system-LIB' Look for and use a system version of the library LIB. 'configure --help' will give you the list of possibilities. '--with-LIB-includes=DIR' '--with-LIB-libdir=DIR' If needed, allows you to specify where the headers/code are for the given library LIB. '--prefix=/usr' '--prefix=/opt/TeXLive' Or whatever your convention is. The default is '/usr/local' and you shouldn't install there for a distro. '--libdir=\${exec_prefix}/lib64' May be needed for 64-bit bi-architecture (GNU/Linux) systems. You will need to take care of the support files mentioned above (*note Installing::), and many other issues, such as font maps, languages, and formats, independently of the build. Norbert Preining has written a detailed article on adapting TL for distros: . (If the article needs updating in the future, perhaps we will merge it into this document.)  File: tlbuild.info, Node: Layout and infrastructure, Next: Configure options, Prev: Installing, Up: Top 6 Layout and infrastructure *************************** The TeX Live source tree is the subtree rooted at 'Build/source' of the complete TL distribution and contains the sources for all executables distributed by TL, as well as 'configure' scripts and 'make' rules to build and install them together with some of their support files. * Menu: * Build system tools:: Modifying infrastructure files. * Top-level directories:: libs texk utils; am auxdir build-aux m4; doc extra. * Autoconf macros:: TL-specific Autoconf macros. * Library modules:: Handling libraries, with examples. * Program modules:: Handling programs, with examples. * Extending TeX Live:: Adding a new module.  File: tlbuild.info, Node: Build system tools, Next: Top-level directories, Up: Layout and infrastructure 6.1 Build system tools ====================== As mentioned above (*note Prerequisites::), a normal build has few requirements. On the other hand, if you want to modify the TeX Live infrastructure sources, such as 'configure.ac' or 'Makefile.am' files, you will need to have several additional tools installed. In general, the TL build system uses the latest released versions of the GNU build tools, installed directly from the original GNU releases (e.g., by building them with 'configure --prefix=/usr/local/gnu' and having 'PATH' start with '/usr/local/gnu/bin'). We have found that trying to use the versions of these tools packaged for distros causes many extra hassles, so don't do that, tempting as it may be. Currently the versions we use are: autoconf (GNU Autoconf) 2.69 automake (GNU automake) 1.16.1 bison (GNU Bison) 3.5.2 flex 2.6.0 ltmain.sh (GNU libtool) 2.4.6 m4 (GNU M4) 1.4.18 makeinfo (GNU texinfo) 6.7 These versions should be used to update the generated files (e.g., 'configure' or 'Makefile.in') in all or parts of the TL tree after their dependencies have been changed. This can be done explicitly with the top-level 'reautoconf' script or implicitly by using the configure option '--enable-maintainer-mode'. It has often turned out that the bison and flex versions are not critical; however, the autotools versions are. If you don't have the given versions, get them before modifying the build infrastructure. The files in the Subversion repository (see ) are all up to date (barring bugs). For this to be reflected by their timestamps in your checkout, be sure to set 'use-commit-times=yes' in '~/.subversion/config' or the equivalent. If timestamps are wrong, you may also be able to avoid unnecessary runs of 'bison', 'flex', or 'makeinfo' with 'touch' of the generated ('.c', '.h', or '.info') files. With '--enable-maintainer-mode' it may also be necessary to 'touch' first 'aclocal.m4', then 'configure' and 'config.h.in' (or 'c-auto.in'), and finally all 'Makefile.in' files.  File: tlbuild.info, Node: Top-level directories, Next: Autoconf macros, Prev: Build system tools, Up: Layout and infrastructure 6.2 Top-level directories ========================= Here is a brief description of the top-level directories in the TeX Live source tree. As mentioned at the beginning of *note Overview of build system::, the main source directories are 'texk/' (TeX-specific programs and libraries), 'utils/' (additional programs), and 'libs/' (generic libraries). In addition, the top-level directories 'am/' and 'm4/' contain 'Makefile.am' fragments and Autoconf macros, respectively, used in many places. Specifically, the file 'm4/kpse-pkgs.m4' contains lists of all program and library modules; missing modules are silently ignored. (This helps in creating cut-down source trees.) Each module contributes fragments (in separate files) defining its capabilities and requirements to the 'configure.ac' scripts at the top-level and in the subdirectories 'libs', 'utils', and 'texk'. The fragments from program modules supply 'configure' options to disable or enable building them; those from library modules specify if an installed (system) version of that library can be used. This ultimately determines which modules need to be built--although all modules must be configured for the benefit of 'make' targets such as 'dist' or 'distcheck'. The top-level 'build-aux/' directory contains the common files 'compile', 'config.guess', 'config.sub', 'depcomp', etc. used by most packages. These are taken from the GNU Gnulib sources (), which in turn synchronizes with any ultimate upstream repository. There are independent copies of some of these in a few other places, e.g., 'libs/freetype2/freetype-*/builds/unix/'. The 'reautoconf' script does not touch those, but a TL cron job keeps them in sync (nightly). When the top-level './Build' script is used to build TL, two more two more top-level directories appear: 'Work/' for the build tree, and 'inst/' for the install tree (from 'make install'). These names (and everything else about 'Build''s operation) can be changed by setting environment variables before running it; see the script source.  File: tlbuild.info, Node: Autoconf macros, Next: Library modules, Prev: Top-level directories, Up: Layout and infrastructure 6.3 Autoconf macros =================== Here we describe a few of the Autoconf macros used in several modules--many more are defined in the sources; see the top-level 'm4/' directory. These general macros are supplemented by module-specific macros in directories such as 'texk/dvipng/m4/'; some of those are described in following sections (*note Library modules:: and *note Program modules::). * Menu: * Setup: General setup macros. * Programs: Macros for programs. * Compilers: Macros for compilers. * Libraries: Macros for libraries. * Flags: Macros for library and header flags. * Windows: Macros for Windows.  File: tlbuild.info, Node: General setup macros, Next: Macros for programs, Up: Autoconf macros 6.3.1 General setup macros -------------------------- The TL sources use two general setup macros: -- Macro: KPSE_BASIC (NAME, [MORE-OPTIONS]) Initialize the basic TL infrastructure for module NAME: 'AM_INIT_AUTOMAKE([foreign MORE-OPTIONS])' 'AM_MAINTAINER_MODE' 'KPSE_COMPILER_WARNINGS' and make sure the C compiler understands function prototypes. This is used for all generic library and program modules. -- Macro: KPSE_COMMON (NAME, [MORE-OPTIONS]) Like 'KPSE_BASIC' but add: 'LT_PREREQ([2.2.6])' 'LT_INIT([win32-dll])' 'AC_SYS_LARGEFILE' 'AC_FUNC_FSEEKO' along with checks for frequently used functions, headers, types, and structures. This is used for TeX-specific modules.  File: tlbuild.info, Node: Macros for programs, Next: Macros for compilers, Prev: General setup macros, Up: Autoconf macros 6.3.2 Macros for programs ------------------------- Macros for program checks: -- Macro: KPSE_CHECK_LATEX Set 'LATEX' to the first of 'latex', 'elatex', or 'lambda' which exists in 'PATH', or to 'no' if none of them exists. Call 'AC_SUBST' for 'LATEX'. The result of this test can be overridden by setting the 'LATEX' environment variable or the cache variable 'ac_cv_prog_LATEX'. -- Macro: KPSE_CHECK_PDFLATEX Check for 'pdflatex' in 'PATH' and set 'PDFLATEX'. -- Macro: KPSE_CHECK_PERL Check for 'perl' or 'perl5' in 'PATH' and set 'PERL'. -- Macro: KPSE_PROG_LEX Call 'AC_PROG_LEX' and add the flag '-l' for 'flex'.  File: tlbuild.info, Node: Macros for compilers, Next: Macros for libraries, Prev: Macros for programs, Up: Autoconf macros 6.3.3 Macros for compilers -------------------------- Macros for compiler-related checks: -- Macro: KPSE_COMPILER_WARNINGS When using the (Objective) C/C++ compiler, set 'WARNING_[OBJ]C[XX]FLAGS' to suitable warning flags (depending on the value given to or implied for '--enable-compiler-warnings'). Call 'AC_SUBST' for them. At present this assumes GNU compiler warning options, but could be extended to others if necessary. This macro caches its results in the 'kpse_cv_warning_cflags', ... variables. -- Macro: KPSE_COMPILER_VISIBILITY When using the C or C++ compiler, try to set 'VISIBILITY_C[XX]FLAGS' to flags to hide external symbols. Call 'AC_SUBST' for this variable. At present this only tests for the compiler option '-fvisibility=hidden', but could be extended if necessary. This macro caches its results in the 'kpse_cv_visibility_cflags' or 'kpse_cv_visibility_cxxflags' variable. -- Macro: KPSE_CXX_HACK Provide the configure option '--enable-cxx-runtime-hack'. If enabled and when using 'g++', try to statically link with 'libstdc++', notably improving portability of the resulting binary. This macro caches its result in the 'kpse_cv_cxx_hack' variable.  File: tlbuild.info, Node: Macros for libraries, Next: Macros for library and header flags, Prev: Macros for compilers, Up: Autoconf macros 6.3.4 Macros for libraries -------------------------- One macro for a library check: -- Macro: KPSE_LARGEFILE (VARIABLE, [EXTRA-DEFINE]) Call 'AC_SYS_LARGEFILE' and 'AC_FUNC_FSEEKO' and append suitable '-D' flags (optionally including '-DEXTRA-DEFINE') to VARIABLE.  File: tlbuild.info, Node: Macros for library and header flags, Next: Macros for Windows, Prev: Macros for libraries, Up: Autoconf macros 6.3.5 Macros for library and header flags ----------------------------------------- Each library module 'libs/LIB' or 'texk/LIB' is supplemented by a macro 'KPSE_LIB_FLAGS' (all uppercase) that provides make variables for that library. E.g., for 'libs/libpng': -- Macro: KPSE_LIBPNG_FLAGS Provide the configure option '--with-system-libpng'. Set and 'AC_SUBST' 'make' variables for modules using this library (either an installed version or from the TeX Live tree): 'LIBPNG_INCLUDES' for use in 'CPPFLAGS', 'LIBPNG_LIBS' for use in 'LDADD', 'LIBPNG_DEPEND' for use as a Makefile dependency, 'LIBPNG_RULE' for the 'make' rules to rebuild the library. -- Macro: KPSE_ADD_FLAGS (NAME) Temporarily extend 'CPPFLAGS' and 'LIBS' with the values required for the library module 'NAME'. -- Macro: KPSE_RESTORE_FLAGS Restore 'CPPFLAGS' and 'LIBS' to their original values. As an example, the 'configure.ac' file for a hypothetical program 'utils/foo' using 'libpng', and hence 'zlib', would contain KPSE_ZLIB_FLAGS KPSE_LIBPNG_FLAGS and its 'Makefile.am' would be along these lines: bin_PROGRAMS = foo AM_CPPFLAGS = ${LIBPNG_INCLUDES} ${ZLIB_INCLUDES} foo_LDADD = ${LIBPNG_LIBS} ${ZLIB_LIBS} foo_DEPENDENCIES = ${ZLIB_DEPEND} ${LIBPNG_DEPEND} ## Rebuild libz @ZLIB_RULE@ ## Rebuild libpng @LIBPNG_RULE@ If it were necessary to examine whether certain 'zlib' or 'libpng' features were available, 'configure.ac' should be continued this way: KPSE_ADD_FLAGS([zlib]) ... # tests for 'zlib' features, if any KPSE_ADD_FLAGS([libpng]) ... # tests for 'libpng' features KPSE_RESTORE_FLAGS # restore 'CPPFLAGS' and 'LIBS'  File: tlbuild.info, Node: Macros for Windows, Prev: Macros for library and header flags, Up: Autoconf macros 6.3.6 Macros for Windows ------------------------ Windows differs in several aspects from Unix-like systems, many of them due to the lack of symbolic links. -- Macro: KPSE_CHECK_WIN32 Check if compiling for a Windows system. The result is either 'no' for Unix-like systems (including Cygwin), 'mingw32' for Windows with GCC, or 'native' for Windows with MSVC. The result is cached in the 'kpse_cv_have_win32' variable. -- Macro: KPSE_COND_WIN32 Call 'KPSE_CHECK_WIN32' and define the Automake conditional 'WIN32' ('true' if the value of 'kpse_cv_have_win32' is not 'no'). -- Macro: KPSE_COND_MINGW32 Call 'KPSE_COND_WIN32' and define the Automake conditional 'MINGW32' ('true' if the value of 'kpse_cv_have_win32' is 'mingw32'). -- Macro: KPSE_COND_WIN32_WRAP Call 'KPSE_COND_WIN32' and define the Automake conditional 'WIN32_WRAP' ('true' if the standard Windows wrapper ('texk/texlive/w32_wrapper/runscript.exe') exists. This wrapper is used on Windows instead of symlinks for the "linked scripts" (*note Linked scripts::). -- Macro: KPSE_WIN32_CALL Call 'KPSE_COND_WIN32' and check if the file 'texk/texlive/w32_wrapper/callexe.c' exists; if it does, create a symlink in the build tree. Compiling 'callexe.c' with '-DEXEPROG='"FOO.exe"'' and installing 'callexe.exe' as 'BAR.exe' is used on Windows instead of a symlink 'BAR->FOO' for Unix-like systems.  File: tlbuild.info, Node: Library modules, Next: Program modules, Prev: Autoconf macros, Up: Layout and infrastructure 6.4 Library modules =================== Here we discuss some specifics for a few of the libraries in TL, both for the details themselves, and as a way of illuminating the general structure and variation. * Menu: * png library:: 'libs/libpng' * zlib library:: 'libs/zlib' * freetype library:: 'libs/freetype2' * kpathsea library:: 'texk/kpathsea'  File: tlbuild.info, Node: png library, Next: zlib library, Up: Library modules 6.4.1 The 'png' library in 'libs/libpng' ---------------------------------------- The "generic" 'png' library uses the source tree in the subdirectory 'libpng-src/', with all modifications for TL recorded in 'TLpatches/*'. The 'configure.ac' fragment 'ac/withenable.ac' contains KPSE_WITH_LIB([libpng], [zlib]) to specify the module name and indicate the dependency on 'zlib'. A third literal argument ''tree'' would specify that the library from the TeX Live tree cannot be replaced by a system version. That not being the case here, a second fragment 'ac/libpng.ac' contains KPSE_TRY_LIB([libpng], [#include ], [png_structp png; png_voidp io; png_rw_ptr fn; png_set_read_fn(png, io, fn);]) thus providing the simple C code #include int main () { png_structp png; png_voidp io; png_rw_ptr fn; png_set_read_fn(png, io, fn); return 0; } which Autoconf uses to verify the usability of a system version with C code. The analogous macro 'KPSE_TRY_LIBXX' would check using C++. These fragments are included by the 'configure.ac' at the top level of TL ('Build/source/configure.ac'). For this library, like many other modules, a proxy build system for TL is used, consisting of our own 'configure.ac', 'Makefile.am', 'include/Makefile.am'; the distributed build system is not used. (Consequently, a few generated files and auxiliary scripts are removed from the distributed source tree.) The public headers 'png.h', 'pngconf.h', and 'pnglibconf.h' are "installed" (as symlinks) under 'include/' in the build tree exactly as they are for a system version under, e.g., '/usr/include/'. The module is supplemented by the file 'm4/kpse-libpng-flags.m4' that defines the M4 macro 'KPSE_LIBPNG_FLAGS' used by all modules depending on this library in their 'configure.ac' to generate the 'make' variables 'LIBPNG_INCLUDES' for use in 'CPPFLAGS', 'LIBPNG_LIBS' for use in 'LDADD', 'LIBPNG_DEPEND' for use as dependencies, and 'LIBPNG_RULE' for the 'make' rules to rebuild the library. 'm4/kpse-libpng-flags.m4' also supplies the configure option '--with-system-libpng', which then uses 'pkg-config' to determine the flags required for the system library.  File: tlbuild.info, Node: zlib library, Next: freetype library, Prev: png library, Up: Library modules 6.4.2 The 'zlib' library in 'libs/zlib' --------------------------------------- This generic library is very much analogous to 'libpng', but without the dependency on any other library. The file 'm4/kpse-zlib-flags.m4' supplies the configure option '--with-system-zlib', as well as '--with-zlib-includes' and '--with-zlib-libdir' to specify non-standard locations of the 'zlib' headers and/or library.  File: tlbuild.info, Node: freetype library, Next: kpathsea library, Prev: zlib library, Up: Library modules 6.4.3 The 'freetype' library in 'libs/freetype2' ------------------------------------------------ This module uses a wrapper build system. In contrast to the proxy build described earlier, the wrapper build has an almost trivial 'configure.ac' and a 'Makefile.am' which invokes the 'configure' and 'make' in the distributed source, followed by 'make install' with the TL build tree as destination. In other words, this actually uses the build system provided by upstream (possibly patched). The flags required for the system library are obtained through 'freetype-config'.  File: tlbuild.info, Node: kpathsea library, Prev: freetype library, Up: Library modules 6.4.4 The 'kpathsea' library in 'texk/kpathsea' ----------------------------------------------- This is one of the TeX-specific libraries that are maintained as part of TeX Live (*note (kpathsea)::); the other is 'ptexenc'. These TeX libraries are Libtool libraries (static and/or shared) and are installed by 'make install' together with the programs. They are, however, not part of the TL DVD as distributed by TeX user groups, and have never been officially released for standalone use. It is possible, and probably useful for distro builds (*note Distro builds::), to specify the configure option '--with-system-kpathsea' in order to use a system version of the library. Programs outside the TL tree should use 'pkg-config' for the required flags. In addition to 'kpathsea/ac/withenable.ac' and 'kpathsea/ac/kpathsea.ac' here there is a third fragment 'kpathsea.ac/mktex.ac', included by both 'withenable.ac' and 'configure.ac', which supplies configure options such as '--enable-mktextfm-default'. These determine the compile time default of whether or not to run 'mktextfm' (and similar) to generate a missing '.tfm' (or whatever) file. In any case, however, the command line options '-mktex=tfm' or '-no-mktex=tfm' for the TeX-like engines override this default.  File: tlbuild.info, Node: Program modules, Next: Extending TeX Live, Prev: Library modules, Up: Layout and infrastructure 6.5 Program modules =================== As with libraries (*note Library modules::), here we discuss the details for a few of the programs in TL. * Menu: * t1utils package:: 'utils/t1utils' * xindy package:: 'utils/xindy' * xdvik package:: 'texk/xdvik' * asymptote:: 'utils/asymptote'  File: tlbuild.info, Node: t1utils package, Next: xindy package, Up: Program modules 6.5.1 The 't1utils' package in 'utils/t1utils' ---------------------------------------------- Here we use the distributed source tree 't1utils-src' with modifications documented in 'TLpatches/*' and a proxy build system consisting of 'configure.ac' and 'Makefile.am'. The fragment 'ac/withenable.ac' contains KPSE_ENABLE_PROG([t1utils]) specifying the module name without any dependencies, and supplies the configure option '--disable-t1utils'.  File: tlbuild.info, Node: xindy package, Next: xdvik package, Prev: t1utils package, Up: Program modules 6.5.2 The 'xindy' package in 'utils/xindy' ------------------------------------------ This module uses the distributed source tree 'xindy-src/' with modifications documented in 'TLpatches/*', and a wrapper 'configure.ac' and 'Makefile.am' that descends into 'xindy-src'. The 'xindy' build requires a 'make' that supports a 'VPATH' build, can handle all targets, and do not refer to '${top_srcdir}' or '${top_builddir}'. The fragment 'xindy/ac/withenable.ac' contains KPSE_ENABLE_PROG([xindy], , [disable]) m4_include(kpse_TL[utils/xindy/ac/xindy.ac]) m4_include(kpse_TL[utils/xindy/ac/clisp.ac]) where 'disable' in the third argument indicates that 'xindy' is only built if explicitly enabled by the user with 'configure --enable-xindy' (the need for 'clisp' makes it too painful to enable by default). The additional fragments 'ac/xindy.ac' and 'ac/clisp.ac' specify more 'configure' options to be seen at the top level, with 'ac/xindy.ac' also included by 'configure.ac'.  File: tlbuild.info, Node: xdvik package, Next: asymptote, Prev: xindy package, Up: Program modules 6.5.3 The 'xdvik' package in 'texk/xdvik' ----------------------------------------- This package is maintained as part of the TeX Live tree with sources in its own directory ('texk/xdvik/'). The fragment 'xdvik/ac/withenable.ac' contains dnl extra_dirs = texk/xdvik/squeeze KPSE_ENABLE_PROG([xdvik], [kpathsea freetype2], [x]) m4_include(kpse_TL[texk/xdvik/ac/xdvik.ac]) thus specifying dependencies on the 'kpathsea', 'freetype', and X11 libraries. The M4 comment (following 'dnl') signals the subsidiary 'squeeze/configure.ac'. This is needed because the main executable 'xdvi-bin' (to be installed as, e.g., 'xdvi-xaw') is for the 'host' system whereas the auxiliary program 'squeeze/squeeze' has to run on the 'build' system; in a cross compilation, these differ. The additional fragment 'ac/xdvik.ac' is also included by 'configure.ac' and supplies the configure option '--with-xdvi-x-toolkit' also seen at the top level.  File: tlbuild.info, Node: asymptote, Prev: xdvik package, Up: Program modules 6.5.4 The subdirectory 'utils/asymptote' ---------------------------------------- This subdirectory contains the sources for 'asy' and 'xasy' but due to its complexity and prerequisites (e.g., OpenGL) it is not part of the TL build system. These programs must be built and installed independently, but are included on the TL DVD together with their support files. See .  File: tlbuild.info, Node: Extending TeX Live, Prev: Program modules, Up: Layout and infrastructure 6.6 Extending TeX Live ====================== This section outlines the basic process for adding new packages to the TL build system. In any case, a new package directory 'foo' should contain the original sources, modified only with changes necessary for TL, in 'foo/foo-src'. The changes should be documented in 'foo/TLpatches/*', and also be submitted upstream whenever reasonable. In addition, 'foo/' will need the usual Automake build-related files ('configure.ac', 'Makefile.am', etc. Please maintain 'foo/ChangeLog' for all TL changes. * Menu: * Adding a new program module:: * Adding a new generic library module:: * Adding a new TeX-specific library module::  File: tlbuild.info, Node: Adding a new program module, Next: Adding a new generic library module, Up: Extending TeX Live 6.6.1 Adding a new program module --------------------------------- A TeX-specific program module in a subdirectory 'texk/PROG' may use the TeX-specific libraries and is included by adding its name 'PROG' to the M4 list 'kpse_texk_pkgs' defined in 'm4/kpse-pkgs.m4'. A generic program module in a subdirectory 'utils/PROG' must not use the TeX-specific libraries and is included by adding its name 'PROG' to the M4 list 'kpse_utils_pkgs' in 'm4/kpse-pkgs.m4'. In either case, the subdirectory 'texk/PROG' or 'utils/PROG' must provide a fragment 'ac/withenable.ac' that contains the M4 macro 'KPSE_ENABLE_PROG' defined in 'm4/kpse-setup.m4' with 'PROG' as the mandatory first argument and three optional arguments: 1. a list of required libraries from the TL tree; 2. a list of options: 'disable' if this module is not to be built without the configure option '--enable-PROG', 'native' if cross compilation is not possible, 'x' if the program requires X11 libraries; 3. a comment added to the help text for the 'configure' option '--enable-PROG' or '--disable-PROG'. If the module requires specific 'configure' options to be seen at the top level, they should be defined in an additional fragment 'ac/PROG.ac' included from 'ac/withenable.ac' and 'configure.ac'. Usually, the new program is maintained somewhere outside of TeX Live. In that case, as above, we put the upstream sources into a subdirectory 'PROG-src' (e.g., 'utils/newprog/newprog-src'). We do not typically run 'configure' in this original '...-src' directory, but only in our own directory; but we do compile using the source files in '...-src'. So, to summarize the files that we must (usually) create: 'ac/withenable.ac' The 'KPSE_ENABLE_PROG' call just explained. 'configure.ac' 'Makefile.am' By merging the contents of the original 'configure.ac' (if provided) and a comparable program already in TL. There is no magic recipe, it's necessary to think about needs to be done in the original vs. in TeX Live. 'TLpatches/TL-Changes' Actions taken after getting the original source tree; typically removal of derived or unused common files. 'TLpatches/patch-...' If any changes are needed to the original sources, record the patches here so they can be applied next time. And send them upstream so that perhaps they won't have to be. 'ChangeLog' Record all TL-specific changes, now and in the future. Then, run GNU 'autoreconf' in the new directory (*note Build system tools::). After that works, 'svn add' the necessary files, including the generated 'Makefile.in aclocal.m4 configure', and 'svn:ignore' the Automake cache 'autom4te.cache'. (This is so people checking out the TL source tree do not have to run any autotools, but can simply run 'configure'.) Then, run the TL tool 'reautoconf' in the top-level TL 'source/' directory, to incorporate the new program into the build tree. Then, run (and rerun) a build until the program compiles and tests successfully, probably involving rerunning autoreconf in the source directory, 'make' in the build directory, etc. After final success, don't forget to commit.  File: tlbuild.info, Node: Adding a new generic library module, Next: Adding a new TeX-specific library module, Prev: Adding a new program module, Up: Extending TeX Live 6.6.2 Adding a new generic library module ----------------------------------------- A generic library module in a subdirectory 'libs/LIB' must not depend on TeX-specific libraries, by definition. It is included by adding its name 'LIB' to the M4 macro 'kpse_libs_pkgs' in 'm4/kpse-pkgs.m4'--before any other libraries from the TeX Live tree on which it depends. As with program modules, the subdirectory 'libs/LIB' must contain the sources and build system for the library (and any installable support programs) and a fragment 'ac/withenable.ac' that contains the M4 macro 'KPSE_WITH_LIB' defined in 'm4/kpse-setup.m4' with 'LIB' as the mandatory first argument and two optional arguments: a list of required libraries from the TL tree, and a list of options: for libraries, currently there is only one--specify 'tree' if this library cannot be replaced by a system version. If a system version can be used, a second fragment 'ac/LIB.ac' is needed, containing the M4 macro 'KPSE_TRY_LIB' (or 'KPSE_TRY_LIBXX') with 'LIB' as the mandatory first argument and two additional arguments for the Autoconf macro 'AC_LANG_PROGRAM' used to compile and link a small C (or C++) program as sanity check for using the system library. In addition a file 'm4/kpse-LIB-flags' (at the top level) must define the M4 macro 'KPSE_LIB_FLAGS' (all uppercase) setting up the 'make' variables 'LIB_INCLUDES', 'LIB_LIBS', 'LIB_DEPEND', and 'LIB_RULE' with the values required for 'CPPFLAGS', 'LDADD', dependencies, and a (multi-line) 'make' rule to rebuild the library when necessary. All of that is needed for the library from the TL tree and, if supported, for a system version. If a system library is allowed, 'KPSE_LIB_FLAGS' also provides the configure option '--with-system-LIB' and uses the additional M4 macro 'KPSE_LIB_SYSTEM_FLAGS' to generate the 'make' variables for a system library. In addition, the definition of the M4 macro 'KPSE_ALL_SYSTEM_FLAGS' in 'm4/kpse-pkgs.m4' must be extended by the line: 'AC_REQUIRE([KPSE_LIB_SYSTEM_FLAGS])'  File: tlbuild.info, Node: Adding a new TeX-specific library module, Prev: Adding a new generic library module, Up: Extending TeX Live 6.6.3 Adding a new TeX-specific library module ---------------------------------------------- A TeX-specific library module in a subdirectory 'texk/LIB' may depend on other TeX-specific libraries but must not depend on any generic library from the TL tree. It is included in the same general ways as a generic library (see the previous section), with these modifications: * The library name 'LIB' is added to the M4 macro 'kpse_texlibs_pkgs', which is also in 'm4/kpse-pkgs.m4'. * The fragment 'ac/withenable.ac' must use 'KPSE_WITH_TEXLIB'.  File: tlbuild.info, Node: Configure options, Next: Coding conventions, Prev: Layout and infrastructure, Up: Top 7 Configure options ******************* Corresponding to the large number of program and library modules there are a large number 'configure' options, most of which are described here. The command 'configure --help' at the top level gives an exhaustive list of all global options and a few important module-specific ones, whereas, e.g., 'texk/lcdf-typetools/configure --help' also displays the 'lcdf-typetools' specific options, which are not shown at the top level. The help text also mentions several influential environment variables, but for TeX Live it is better to specify them as assignments on the command line. The './Build' script used to make the binaries shipped with TeX Live invokes the top-level 'configure' with a few additional options (*note Building::). The defaults discussed below are those for the actual 'configure' script; invoking 'configure' via './Build' yields different results. Defaults for most options are set at the top level and propagated explicitly to all subdirectories. Options specified on the command line are checked for consistency but never modified. * Menu: * Global configure options:: * Program-specific configure options:: * Library-specific configure options:: * Variables for configure::  File: tlbuild.info, Node: Global configure options, Next: Program-specific configure options, Up: Configure options 7.1 Global configure options ============================ Here are the global configure options. * Menu: * --disable-native-texlive-build:: * --prefix --bindir ...:: * --disable-largefile:: * --disable-missing:: * --enable-compiler-warnings=LEVEL:: * --enable-cxx-runtime-hack:: * --enable-maintainer-mode:: * --enable-multiplatform:: * --enable-shared:: * --enable-silent-rules:: * --without-ln-s:: * --without-x::  File: tlbuild.info, Node: --disable-native-texlive-build, Next: --prefix --bindir ..., Up: Global configure options 7.1.1 '--disable-native-texlive-build' -------------------------------------- If enabled (the default), build for a TL binary distribution as shipped by the TeX user groups. This requires GNU 'make' and implies '--enable-multiplatform' and '--enable-cxx-runtime-hack' (unless they are explicitly disabled), and enforces '--disable-shared'. If building TL for a GNU/Linux or other distribution, this should be disabled and system versions of most libraries should be used (*note Distro builds::). A related option, '--enable-texlive-build', is automatically passed to all subdirectories (and cannot be disabled). Subdirectories that can also be built independently from the TL tree (such as 'utils/xindy' and 'texk/dvipng') but cooperate with TL can use this option to enable TL-specific adaptations, such as installation paths.  File: tlbuild.info, Node: --prefix --bindir ..., Next: --disable-largefile, Prev: --disable-native-texlive-build, Up: Global configure options 7.1.2 '--prefix', '--bindir', ... --------------------------------- These standard Autoconf options specify various installation directories as usual. For the complete list, *note Installation directories::. Also as usual, all values are prefixed by the value of 'DESTDIR', if set, on the 'make' command line (*note Installation in a temporary location: (automake)Staged Installs.).  File: tlbuild.info, Node: --disable-largefile, Next: --disable-missing, Prev: --prefix --bindir ..., Up: Global configure options 7.1.3 '--disable-largefile' --------------------------- Omit large file support (LFS), which is needed on most 32-bit Unix systems for files with 2GB or more. Regardless of this option, the size of 'DVI' and 'GF' files must always be <2GB, due to the file format specifications. With LFS, there is no fixed limit on the size of PDF files created by 'pdftex' or PostScript files created by 'dvips'. The size of PDF images included by 'pdftex' or 'luatex' must, however, be <2GB when using 'poppler' version 0.22 or before (even on 64-bit systems with LFS).  File: tlbuild.info, Node: --disable-missing, Next: --enable-compiler-warnings=LEVEL, Prev: --disable-largefile, Up: Global configure options 7.1.4 '--disable-missing' ------------------------- Immediately terminate the build process if a requested program or feature must be disabled, e.g., due to missing libraries. This can help when figuring out a specific (sub)set of modules to enable.  File: tlbuild.info, Node: --enable-compiler-warnings=LEVEL, Next: --enable-cxx-runtime-hack, Prev: --disable-missing, Up: Global configure options 7.1.5 '--enable-compiler-warnings='LEVEL ---------------------------------------- Enable various levels of compiler warnings for C, C++, and/or Objective C: the LEVEL value can be one of: 'no min yes max all'. The default is 'yes' in 'maintainer-mode' (see below) and 'min' otherwise. This option defines the variables 'WARNING_[OBJ]C[XX]FLAGS', but these variables are not consistently used in all library and program modules. At present, these warning flags assume options from the GNU compilers.  File: tlbuild.info, Node: --enable-cxx-runtime-hack, Next: --enable-maintainer-mode, Prev: --enable-compiler-warnings=LEVEL, Up: Global configure options 7.1.6 '--enable-cxx-runtime-hack' --------------------------------- If enabled (as it is for the native TL build), when using 'g++', try to statically link with 'libstdc++', thus improving portability of the resulting binary. *Note Macros for compilers::.  File: tlbuild.info, Node: --enable-maintainer-mode, Next: --enable-multiplatform, Prev: --enable-cxx-runtime-hack, Up: Global configure options 7.1.7 '--enable-maintainer-mode' -------------------------------- Enable 'make' rules and dependencies not useful (and sometimes confusing) to the casual user. This requires current versions of the GNU build tools (*note Build system tools::), as it automatically rebuilds infrastructure files as needed. *Note 'missing' and 'AM_MAINTAINER_MODE': (automake)maintainer-mode.  File: tlbuild.info, Node: --enable-multiplatform, Next: --enable-shared, Prev: --enable-maintainer-mode, Up: Global configure options 7.1.8 '--enable-multiplatform' ------------------------------ If enabled (as it is for the native TL build) and '--bindir=DIR' or '--libdir=DIR' are not specified, install executables and libraries in per-platform subdirectories of 'EPREFIX/bin' and 'EPREFIX/lib' where EPREFIX is the value given or implied for 'exec_prefix'. In any case, the values for 'bindir' and 'libdir' are automatically propagated to all subdirectories.  File: tlbuild.info, Node: --enable-shared, Next: --enable-silent-rules, Prev: --enable-multiplatform, Up: Global configure options 7.1.9 '--enable-shared' ----------------------- Build shared versions of the TeX-specific libraries such as 'libkpathsea'. This is not allowed for a native TL build (i.e., '--disable-native-texlive-build' must also be specified).  File: tlbuild.info, Node: --enable-silent-rules, Next: --without-ln-s, Prev: --enable-shared, Up: Global configure options 7.1.10 '--enable-silent-rules' ------------------------------ Enable the use of less verbose build rules. When using GNU 'make' (or any 'make' implementation supporting nested variable expansions), you can specify 'V=1' on the 'make' command line to get more verbosity, or 'V=0' to get less, regardless of this option.  File: tlbuild.info, Node: --without-ln-s, Next: --without-x, Prev: --enable-silent-rules, Up: Global configure options 7.1.11 '--without-ln-s' ----------------------- Required when using a system without a working 'ln -s' to build binaries for a Unix-like system. However, 'make install' will not create anything useful, and might fail.  File: tlbuild.info, Node: --without-x, Prev: --without-ln-s, Up: Global configure options 7.1.12 '--without-x' -------------------- Disable all programs using the X Window System.  File: tlbuild.info, Node: Program-specific configure options, Next: Library-specific configure options, Prev: Global configure options, Up: Configure options 7.2 Program-specific configure options ====================================== Here are (some of) the program-specific 'configure' options. * Menu: * --enable-PROG --disable-PROG:: * --disable-all-pkgs:: * Configure options for texk/web2c:: * Configure options for texk/bibtex-x:: * Configure options for texk/dvipdfm-x:: * Configure options for texk/dvisvgm:: * Configure options for texk/texlive:: * Configure options for texk/xdvik:: * Configure options for utils/xindy::  File: tlbuild.info, Node: --enable-PROG --disable-PROG, Next: --disable-all-pkgs, Up: Program-specific configure options 7.2.1 '--enable-PROG', '--disable-PROG' --------------------------------------- Do or do not build and install the program(s) of module 'PROG'.  File: tlbuild.info, Node: --disable-all-pkgs, Next: Configure options for texk/web2c, Prev: --enable-PROG --disable-PROG, Up: Program-specific configure options 7.2.2 '--disable-all-pkgs' -------------------------- Do not build any program modules by default--only those explicitly enabled. This is useful when one wants to work on only a single program, which is specified with an additional '--enable' option, e.g., '--enable-dvipdfm-x'. It's still simplest to check out and configure the whole source tree, but at least only the program you are interested in, and its dependencies, are built. *Note Build one package::. Without this option, all modules are built except those that are explicitly disabled or specify 'disable' in their 'ac/withenable.ac' fragment.  File: tlbuild.info, Node: Configure options for texk/web2c, Next: Configure options for texk/bibtex-x, Prev: --disable-all-pkgs, Up: Program-specific configure options 7.2.3 Configure options for 'texk/web2c' ---------------------------------------- '--with-banner-add=STR' Add 'STR' to the default version string (which is ''TeX Live YEAR'' or ''Web2C YEAR'') appended to banner lines. This is ignored for a native TL build, but distro builds should specify, e.g., '/SOMEDISTRO'. '--with-editor=CMD' Specify the command 'CMD' to invoke from the 'e' option of TeX and friends, replacing the default 'vi +%d '%s'' for Unix or 'texworks --position=%d "%s"' for Windows. '--with-fontconfig-includes=DIR', '--with-fontconfig-libdir=DIR' Building XeTeX on non-Mac systems requires the 'fontconfig' library headers and code. If one or both of these options are given, the required flags are derived from them; otherwise, they are determined via 'pkg-config' (if present). '--with-mf-x-toolkit' Use the X toolkit ('libXt') for Metafont (the default is to use the lowest-level 'Xlib' support; it seems this has the best chance of working across X installations nowadays). '--disable-dump-share' Make the 'fmt'/'base' dump files architecture dependent (somewhat faster on LittleEndian architectures). '--disable-ipc' Disable TeX's '--ipc' option. '--disable-mf-nowin' Do not build a separate non-graphically-capable Metafont ('mf-nowin'). '--disable-tex', '--enable-etex', ... Do not or do build the various TeX, Metafont, and MetaPost engines (defaults are defined in the fragment 'texk/web2c/ac/web2c.ac'). '--disable-web-progs' Do not build the original WEB programs 'bibtex', ..., 'weave'. Useful if, e.g., you only want to (re)build some engines. '--enable-auto-core' This option causes TeX and Metafont to produce a core dump when a particular hacky filename is encountered, for use in creating preloaded binaries. This is rarely done nowadays. '--enable-libtool-hack' If enabled (which is the default for all platforms), prevents 'libtool' from linking explicitly with dependencies of 'libfontconfig' such as 'libexpat'. '--enable-*win' Include various types of non-X window support for Metafont (EPSF output, 'mftalk', old graphics terminals, ...). '--enable-tex-synctex', '--disable-etex-synctex', ... Build the TeX engines with or without 'SyncTeX' support; ignored for a native TeX Live build. Defaults are defined in 'texk/web2c/ac/web2c.ac'. '--disable-synctex' Do not build the 'SyncTeX' library and tool.  File: tlbuild.info, Node: Configure options for texk/bibtex-x, Next: Configure options for texk/dvipdfm-x, Prev: Configure options for texk/web2c, Up: Program-specific configure options 7.2.4 Configure options for 'texk/bibtex-x' ------------------------------------------- The programs 'bibtex8' and 'bibtexu' have been merged into the module 'bibtex-x' (extended BibTeX). '--disable-bibtex8' Do not build the 'bibtex8' program. '--disable-bibtexu' Do not build the 'bibtexu' program (building 'bibtexu' requires 'ICU' libraries).  File: tlbuild.info, Node: Configure options for texk/dvipdfm-x, Next: Configure options for texk/dvisvgm, Prev: Configure options for texk/bibtex-x, Up: Program-specific configure options 7.2.5 Configure options for 'texk/dvipdfm-x' -------------------------------------------- The former modules 'dvipdfmx' (extended DVI to PDF converter) and 'xdvipdfmx' (the same, as used by XeTeX) have been merged into 'dvipdfm-x' at the source level. Two separate binaries are still created by default. In addition, 'dvipdfm' is created as a symlink to 'dvipdfmx', with backward-compatible (very slightly different) behavior. '--disable-dvipdfmx' Do not build the 'dvipdfmx' program or make the 'dvipdfm' symlink. '--disable-xdvipdfmx' Do not build the 'xdvipdfmx' program.  File: tlbuild.info, Node: Configure options for texk/dvisvgm, Next: Configure options for texk/texlive, Prev: Configure options for texk/dvipdfm-x, Up: Program-specific configure options 7.2.6 Configure options for 'texk/dvisvgm' ------------------------------------------ '--with-system-libgs' Build 'dvisvgm' using installed Ghostscript ('gs') headers and library (not allowed for a native TL build). The default is to load the 'gs' library at runtime if possible, else to disable support for PostScript specials. '--without-libgs' Build 'dvisvgm' without PostScript support at all. Because the dynamic loading just mentioned defeats all attempts at static linking, the result can crash due to library incompatibilities, e.g., on CentOS 5. '--with-libgs-includes=DIR', '--with-libgs-libdir=DIR' Specify non-standard locations of the Ghostscript headers and library.  File: tlbuild.info, Node: Configure options for texk/texlive, Next: Configure options for texk/xdvik, Prev: Configure options for texk/dvisvgm, Up: Program-specific configure options 7.2.7 Configure options for 'texk/texlive' ------------------------------------------ '--disable-linked-scripts' Do not install the "linked scripts" (*note Linked scripts::), except for the TL scripts required to run 'texlinks'.  File: tlbuild.info, Node: Configure options for texk/xdvik, Next: Configure options for utils/xindy, Prev: Configure options for texk/texlive, Up: Program-specific configure options 7.2.8 Configure options for 'texk/xdvik' ---------------------------------------- '--with-gs=FILENAME' Hardwire the location of Ghostscript ('gs') as called by Xdvik. '--with-xdvi-x-toolkit=KIT' Use toolkit 'KIT' for 'xdvik', one of: 'motif xaw xaw3d neXtaw'. The default is 'motif' if available, else 'xaw'. '--enable-xi2-scrolling' Use XInput 2.1 "smooth scrolling" if available (default: yes, except for a native TL build).  File: tlbuild.info, Node: Configure options for utils/xindy, Prev: Configure options for texk/xdvik, Up: Program-specific configure options 7.2.9 Configure options for 'utils/xindy' ----------------------------------------- '--enable-xindy-rules' Build and install 'xindy' rules (default: yes, except for a native TL build). '--enable-xindy-docs' Build and install 'xindy' documentation (default: yes, except for a native TL build). '--with-clisp-runtime=FILENAME' Specifies the full path for the Clisp runtime file ('lisp.run' or 'lisp.exe') to be installed. When specified as 'default' (the default for a native TL build) the path is determined by the Clisp executable; the value 'system' (not allowed for a native TL build, but the default otherwise) indicates that 'xindy' will use the installed version of 'clisp' (which must be identical to the one used to build 'xindy').  File: tlbuild.info, Node: Library-specific configure options, Next: Variables for configure, Prev: Program-specific configure options, Up: Configure options 7.3 Library-specific configure options ====================================== Here are (some of) the library-specific 'configure' options, starting with this generic one: '--with-system-LIB' Use an installed (system) version of the library 'LIB'; this option exists for most libraries, but is not allowed for a native TL build. Using a system version implies also using the system versions of all libraries that LIB depends on. For many libraries '--with-LIB-includes=DIR' and '--with-LIB-libdir=DIR' can specify non-standard search locations; others use 'pkg-config' or similar to determine the required flags. The top-level 'configure' script performs a consistency check for all required system libraries and bails out if tests fail. * Menu: * Configure options for kpathsea:: * Configure options for system poppler::  File: tlbuild.info, Node: Configure options for kpathsea, Next: Configure options for system poppler, Up: Library-specific configure options 7.3.1 Configure options for 'kpathsea' -------------------------------------- '--enable-CMD-default', '--disable-CMD-default' Determine the compile time default for whether or not to run CMD, which is one of: 'mkocp' (Omega compiled translation process file) 'mkofm' (Omega font metrics file) 'mktexfmt' (format/base dump file) 'mktexmf' (Metafont source) 'mktexpk' (PK bitmap font) 'mktextex' (TeX source) 'mktextfm' (TFM file) to generate the specified type of file dynamically. The default can be overridden by the user in any case (*note kpathsea library::).  File: tlbuild.info, Node: Configure options for system poppler, Prev: Configure options for kpathsea, Up: Library-specific configure options 7.3.2 Configure options for system 'poppler' -------------------------------------------- Building XeTeX requires 'poppler', either from the TL tree or system headers and library. Building pdfTeX requires either 'xpdf' from the TeX Live tree or system 'poppler' headers and library. '--with-system-poppler' Use a system version (0.18 or newer) of 'poppler' for LuaTeX (or LuaJITTeX) and XeTeX, and use 'pkg-config' to obtain the required flags. '--with-system-xpdf' Use a system version (0.12 or newer) of 'poppler' (and 'pkg-config') for pdfTeX instead of 'xpdf' from the TL tree. *Note --disable-largefile::.  File: tlbuild.info, Node: Variables for configure, Prev: Library-specific configure options, Up: Configure options 7.4 Variables for configure =========================== The values for these variables can be specified as 'configure' arguments of the form 'VAR=VALUE'. They can also be defined in the environment, but that might not work for cross compilations. 'CC' 'CXX' 'CPPFLAGS' And plenty more. As usual with Autoconf, these variables specify the name (or full path) of compilers, preprocessor flags, and similar. *Note (autoconf)Preset Output Variables::. 'CLISP' Name (or full path) of the 'clisp' executable, used to build 'xindy'. 'FT2_CONFIG' 'ICU_CONFIG' 'PKG_CONFIG' These specify the name (or path) for the 'freetype-config', 'icu-config', and 'pkg-config' commands used to determine the flags required for system versions of 'libfreetype', the ICU libraries, and other libraries, respectively. 'KPSEWHICH' Name (or path) of an installed 'kpsewhich' binary, used by 'make check' to determine the location of, e.g., 'cmbx10.tfm'. 'MAKE' 'SED' And more. Name (or path) of the 'make', 'sed', and similar programs; used at the top level and propagated to all subdirectories. 'PERL' 'LATEX' 'PDFLATEX' Name (or full path) for the 'perl', 'latex', and 'pdflatex' commands used, e.g., to build the 'xindy' documentation.  File: tlbuild.info, Node: Coding conventions, Next: Continuous integration, Prev: Configure options, Up: Top 8 Coding conventions ******************** Ideally, building all of TeX Live with '--enable-compiler-warnings=max' should produce no (GCC) compiler warnings at all. In spite of considerable efforts into that direction we are still far from that goal and there are reasons that we may never fully reach it. Below are some rules about declarations of functions or variables and the use of 'const'. These rules should be applied to the code maintained in the TeX Live tree and for other packages whose maintainers are willing to accept patches. * Menu: * Declarations and definitions:: * Const::  File: tlbuild.info, Node: Declarations and definitions, Next: Const, Up: Coding conventions 8.1 Declarations and definitions ================================ C standards ........... The TeX Live build system no longer supports pre-ANSI C compilers. Thus all function prototypes and definitions must conform to the ANSI C standard (including 'void' in the declaration of C functions with no parameters). On the other hand, TL is built for a wide variety of systems, not all of which support the C99 standard. Therefore using C99 features should be avoided if that can easily be done. In particular, C code must not contain declarations after statements or C++-style comments. If some C99 (or later) constructs must be used, the module should verify that they are available and otherwise provide an alternative. For example, the module 'texk/chktex' uses the C99 function 'stpcpy()' that may or may not be available on a particular system. It uses 'AC_CHECK_DECLS([stpcpy])' in 'configure.ac' to test this, and provides a perhaps less efficient alternative (in the file 'Utility.h'): #if !(defined HAVE_DECL_STPCPY && HAVE_DECL_STPCPY) static inline char *stpcpy(char *dest, const char *src) { return strcpy(dest, src) + strlen(src); } #endif Static functions ................ Functions used in only one file should be declared 'static'; they require no prototype except in forward declarations. Extern functions ................ Functions not declared 'static', usually because they are used in several files, require an ('extern') prototype in exactly one header file, which is included in the file defining the function and in all files using that function--this is the only way to guarantee consistency between definition and use. There should be no 'extern' declarations sprinkled throughout the C code (with or without comments as to where that function is defined). Variable declarations ..................... The declaration of global variables follows analogous rules: they are either declared 'static' if used in only one file or declared 'extern' in exactly one header and instantiated in exactly one file.  File: tlbuild.info, Node: Const, Prev: Declarations and definitions, Up: Coding conventions 8.2 Const ========= The 'const' feature of C is valuable, but easy to mis-use. Function parameters ................... Ideally, a function parameter not modified by the function should be declared as 'const'. This is important in particular for strings ('char*') because the actual arguments are often string literals. It is perfectly legitimate and safe to use a type 'char*' value for a type 'const char*' variable (in an assignment, as initializer, as function argument, or as return value). It is equally safe to use a type 'char**' value for a type 'const char*const*' variable, but not for a type 'const char**' variable since that might cause modification of a quantity supposed to be constant. Getting all 'const' qualifiers right can get quite involved but can almost always be done. There are only a couple notable exceptions: the X11 headers are full of declarations that ought to use 'const' but do not; at one time, 'libfreetype' also did not fully specify 'const', but this has not been checked recently. What must be avoided with 'const' ................................. The GCC compiler warnings "assignment discards qualifiers..." and analogous warnings for "initialization", "passing arg", or "return" must be strenuously avoided in our own code. The only exception is when they are caused by X11 declarations or other third party code. What should be avoided with 'const' ................................... A type cast, e.g., from 'const char*' to 'char*' does not solve any problems; depending on warning options, it may only hide them. Therefore such casts should be avoided whenever possible and otherwise must be carefully analyzed to make sure that they cannot cause the modification of quantities supposed to be constant.  File: tlbuild.info, Node: Continuous integration, Next: install-tl, Prev: Coding conventions, Up: Top 9 Continuous integration ************************ The TeX Live sources are subjected to continuous integration testing on Travis-CI () via a git-svn mirror of the sources that is pushed to Github (). The git-svn mirror is updated (currently) at 30 minute intervals, and only the last commit pushed is tested on Travis-CI. * Menu: * Transfer from Subversion to Github:: * Automatic update of the Git mirror:: * CI testing on Travis-CI:: * Releases on Github::  File: tlbuild.info, Node: Transfer from Subversion to Github, Next: Automatic update of the Git mirror, Up: Continuous integration 9.1 Transfer from Subversion to Github ====================================== The git-svn program () is used to check out the subtree 'Build/source' of the canonical Subversion repository. The author index file used is not maintained in either Git or Subversion but can be provided on request. The initial checkout was done by invoking git svn --authors-file usermap clone \ svn://USER@tug.org/texlive/trunk/Build/source where the 'usermap' file maps Subversion user names to name and emails of the authors. Anonymous checkout is also possible: git svn --authors-file usermap clone \ svn://tug.org/texlive/trunk/Build/source In the following, we will use _admin_ to refer to a user who has read/write access to the TeX Live subversion repository, and is also an administrator of the ''TeX-Live'' team at Github. The above initial checkout has been carried out by _admin_ on the server 'texlive.info'. On Github, a new git repository named 'texlive-source' was created by _admin_ within the 'TeX-Live' "organization" (). The remote was added to the checkout with 'git remote add origin git@github.com:TeX-Live/texlive-source.git'. To automate the update on Github, a new ssh key was generated and added to the 'texlive-source' repository on Github as deployment key. Thus, pushes using this key can only go to the 'texlive-source' repository and not anywhere else. The usage of 'git-svn' requires a strict discipline to keep a linear history in the master branch. Since we are aiming at a pure mirror facility on Github, we have decided to further restrict the 'master' branch of the 'texlive-source' repository on Github to changes by _admin_. This setup allows other developers to branch off 'master' and push their branches to the Github repository, but all updates need to come from the local 'master' (not the one on Github) to Subversion, back to 'master' on 'texlive.info', and from there to Github.  File: tlbuild.info, Node: Automatic update of the Git mirror, Next: CI testing on Travis-CI, Prev: Transfer from Subversion to Github, Up: Continuous integration 9.2 Automatic update of the Git mirror ====================================== _admin_ has installed a cron job on 'texlive.info' running every 30 minute which essentially runs 'git svn rebase' and 'git push' in the 'master' branch of the checkout. The first command fetches the changes from the Subversion repository and updates the 'master' branch with them, and the second pushes changes (if any) to Github.  File: tlbuild.info, Node: CI testing on Travis-CI, Next: Releases on Github, Prev: Automatic update of the Git mirror, Up: Continuous integration 9.3 CI testing on Travis-CI =========================== The 'source' tree of TeX Live contains a top-level file '.travis.yml' which controls the automatic testing on Travis-CI. _admin_ has registered with Travis-CI and allowed access to the Github's 'TeX-Live' organization's 'texlive-source' repository. The default settings are to build the last commit of each push. No further action is necessary on Travis-CI. If changes have been pushed via the cron job above, Travis-CI will automatically checkout the last pushed commit and try building it.  File: tlbuild.info, Node: Releases on Github, Prev: CI testing on Travis-CI, Up: Continuous integration 9.4 Releases on Github ====================== Given a git checkout of 'texlive-source': git pull git tag build-svnNNNN git push --tags and the result will appear at . Releases can also be made manually from that web page (see 'tl-update-bindir' for hints).  File: tlbuild.info, Node: install-tl, Next: tlmgr, Prev: Continuous integration, Up: Top Appendix A install-tl ********************* * Menu: * install-tl NAME:: * install-tl SYNOPSIS:: * install-tl DESCRIPTION:: * install-tl REFERENCES:: * install-tl OPTIONS:: * install-tl PROFILES:: * install-tl ENVIRONMENT VARIABLES:: * install-tl AUTHORS AND COPYRIGHT::  File: tlbuild.info, Node: install-tl NAME, Next: install-tl SYNOPSIS, Up: install-tl A.1 NAME ======== install-tl - TeX Live cross-platform installer  File: tlbuild.info, Node: install-tl SYNOPSIS, Next: install-tl DESCRIPTION, Prev: install-tl NAME, Up: install-tl A.2 SYNOPSIS ============ install-tl [_option_]... install-tl-windows.bat [_option_]... install-tl-advanced.bat [_option_]...  File: tlbuild.info, Node: install-tl DESCRIPTION, Next: install-tl REFERENCES, Prev: install-tl SYNOPSIS, Up: install-tl A.3 DESCRIPTION =============== This installer creates a runnable TeX Live installation from various media, including over the network, from local hard disk, a DVD, etc. The installer works on all platforms supported by TeX Live. For information on initially downloading TeX Live, see . The basic idea of TeX Live installation is for you to choose one of the top-level _schemes_, each of which is defined as a different set of _collections_ and _packages_, where a collection is a set of packages, and a package is what contains actual files. Within the installer, you can choose a scheme, and further customize the set of collections to install, but not the set of the packages. To work at the package level, use 'tlmgr' (reference just below) after the initial installation is complete. The default is 'scheme-full', which installs everything, and this is highly recommended.  File: tlbuild.info, Node: install-tl REFERENCES, Next: install-tl OPTIONS, Prev: install-tl DESCRIPTION, Up: install-tl A.4 REFERENCES ============== Post-installation configuration, package updates, and more, are handled through *tlmgr*(1), the TeX Live Manager (). The most up-to-date version of this installer documentation is on the Internet at . For the full documentation of TeX Live, see .  File: tlbuild.info, Node: install-tl OPTIONS, Next: install-tl PROFILES, Prev: install-tl REFERENCES, Up: install-tl A.5 OPTIONS =========== As usual, all options can be specified in any order, and with either a leading '-' or '--'. An argument value can be separated from its option by either a space or '='. *-gui* [[=]_module_] If no _module_ is given, starts the Tcl/Tk (see below) GUI installer. If _module_ is given loads the given installer module. Currently the following modules are supported: 'text' The text mode user interface (default on Unix systems). Same as the '-no-gui' option. 'tcl' The Tcl/Tk user interface (default on Macs and Windows). It starts with a small number of configuration options, roughly equivalent to what the wizard option below offers, but a button 'Advanced' takes you to a screen with roughly the same options as the 'perltk' interface. 'wizard' The wizard mode user interface, asking only minimal questions before installing all of TeX Live. 'expert' A generic name for, currently, 'perltk'; it may select a different GUI in the future. 'perltk' The expert GUI installer, providing access to more options. The 'perltk' and 'wizard' modules require the Perl/Tk module (). if Perl/Tk is not available, installation continues in text mode, except on Windows, where all gui options except 'text' are diverted to the default 'tcl' GUI. The 'tcl' GUI requires Tcl/Tk. This is standard on Macs and is often already installed on GNU/Linux. For Windows, TeX Live provides a Tcl/Tk runtime. *-no-gui* Use the text mode installer (default except on Windows and Macs). *-lang* _llcode_ By default, the GUI tries to deduce your language from the environment. The Tcl GUI uses the language detection built into Tcl/Tk; the Perl/Tk GUIs use the 'LC_MESSAGES' environment variable. If that fails you can select a different language by giving this option with a language code (based on ISO 639-1). Currently supported (but not necessarily completely translated) are: English (en, default), Czech (cs), German (de), French (fr), Italian (it), Japanese (ja), Dutch (nl), Polish (pl), Brazilian Portuguese (pt_BR), Russian (ru), Slovak (sk), Slovenian (sl), Serbian (sr), Ukrainian (uk), Vietnamese (vi), simplified Chinese (zh_CN), and traditional Chinese (zh_TW). *-repository* _url|path_ Specify the package repository to be used as the source of the installation. In short, this can be a directory name or a url using http(s), ftp, or scp. The documentation for 'tlmgr' has the details (). For installation, the default is to pick a mirror automatically, using ; the chosen mirror is used for the entire download. You can use the special argument 'ctan' as an abbreviation for this. (See for more about CTAN and its mirrors.) After installation is complete, you can use that installation as the repository for another installation. If you chose to install less than the full scheme containing all packages, the list of available schemes will be adjusted accordingly. *-select-repository* This option allows you to choose a particular mirror from the current list of active CTAN mirrors. This option is supported in the 'text', 'wizard' and 'perltk' installer modes, and will also offer to install from local media if available, or from a repository specified on the command line. It's useful when the (default) automatic redirection does not choose a good host for you. *-all-options* Normally options not relevant to the current platform are not shown (e.g., when running on Unix, Windows-specific options are omitted). Giving this command line option allows configuring such "foreign" settings. *-custom-bin* _path_ If you have built your own set of TeX Live binaries (perhaps because your platform was not supported by TeX Live out of the box), this option allows you to specify the _path_ to a directory where the binaries for the current system are present. The installation will continue as usual, but at the end all files from _path_ are copied over to 'bin/custom/' under your installation directory and this 'bin/custom/' directory is what will be added to the path for the post-install actions. To install multiple custom binary sets, manually rename 'custom' before doing each. For more information on custom binaries, see . For general information on building TeX Live, see . *-debug-translation* In the Perl/Tk GUI modes, this option reports any missing, or more likely untranslated, messages to standard error. Helpful for translators to see what remains to be done. *-force-platform* _platform_ Instead of auto-detecting the current platform, use _platform_. Binaries for this platform must be present and they must actually be runnable, or installation will fail. '-force-arch' is a synonym. *-help*, *-help*, *-?* Display this help and exit. (This help is also on the web at ). Sometimes the 'perldoc' and/or 'PAGER' programs on the system have problems, possibly resulting in control characters being literally output. This can't always be detected, but you can set the 'NOPERLDOC' environment variable and 'perldoc' will not be used. *-in-place* This is a quick-and-dirty installation option in case you already have an rsync or svn checkout of TeX Live. It will use the checkout as-is and will just do the necessary post-install. Be warned that the file 'tlpkg/texlive.tlpdb' may be rewritten, that removal has to be done manually, and that the only realistic way to maintain this installation is to redo it from time to time. This option is not available via the installer interfaces. USE AT YOUR OWN RISK. *-init-from-profile* _profile_file_ Similar to *-profile* (see *note PROFILES: install-tl PROFILES. below), but only initializes the installation configuration from _profile_file_ and then starts a normal interactive session. Environment variables are not ignored. *-logfile* _file_ Write both all messages (informational, debugging, warnings) to _file_, in addition to standard output or standard error. If this option is not given, the installer will create a log file in the root of the writable installation tree, for example, '/usr/local/texlive/YYYY/install-tl.log' for the _YYYY_ release. *-no-cls* For the text mode installer only: do not clear the screen when entering a new menu (for debugging purposes). *-no-persistent-downloads* *-persistent-downloads* For network installs, activating this option makes the installer try to set up a persistent connection using the 'Net::LWP' Perl module. This opens only one connection between your computer and the server per session and reuses it, instead of initiating a new download for each package, which typically yields a significant speed-up. This option is turned on by default, and the installation program will fall back to using 'wget' if this is not possible. To disable usage of LWP and persistent connections, use '-no-persistent-downloads'. *-no-verify-downloads* By default, if a GnuPG 'gpg' binary is found in PATH, downloads are verified against a cryptographic signature. This option disables such verification. The full description is in the Crytographic Verification section of the 'tlmgr' documentation, e.g., *-non-admin* For Windows only: configure for the current user, not for all users. *-portable* Install for portable use, e.g., on a USB stick. Also selectable from within the perltk and text installers. *-print-platform* Print the TeX Live identifier for the detected platform (hardware/operating system) combination to standard output, and exit. '-print-arch' is a synonym. *-profile* _profile_file_ Load _profile_file_ and do the installation with no user interaction, that is, a batch (unattended) install. Environment variables are ignored. See *note PROFILES: install-tl PROFILES. below. *-q* Omit normal informational messages. *-scheme* _scheme_ Schemes are the highest level of package grouping in TeX Live; the default is to use the 'full' scheme, which includes everything. This option overrides that default. You can change the scheme again before the actual installation with the usual menu. The _scheme_ argument may optionally have a prefix 'scheme-'. The list of supported scheme names depends on what your package repository provides; see the interactive menu list. *-v* Include verbose debugging messages; repeat for maximum debugging: '-v -v'. (Further repeats are accepted but ignored.) *-version*, *-version* Output version information and exit. If '-v' is also given, the versions of the TeX Live modules used are also reported.  File: tlbuild.info, Node: install-tl PROFILES, Next: install-tl ENVIRONMENT VARIABLES, Prev: install-tl OPTIONS, Up: install-tl A.6 PROFILES ============ A _profile_ file contains all the values needed to perform an installation. After a normal installation has finished, a profile for that exact installation is written to the file 'tlpkg/texlive.profile'. In addition, from the text menu one can select 'P' to save the current setup as a profile at any time. Such a profile file can be given as the argument to '-profile', for example to redo the exact same installation on a different system. Alternatively, you can use a custom profile, most easily created by starting from a generated one and changing values, or an empty file, which will take all the defaults. As mentioned above, the installer only supports selection by scheme and collections, not individual packages, so packages cannot be specified in profile files either. Use 'tlmgr' to work at the package level. Within a profile file, each line consists of _variable_ [_value_] except for comment lines starting with '#'. The possible variable names are listed below. Values, when present, are either '0' or '1' for booleans, or strings (which must be specified without any quote characters). Leading whitespace is ignored. If the variable 'selected_scheme' is defined and _no_ collection variables at all are defined, then the collections required by the specified scheme (which might change over time) are installed, without explicitly listing them. This eases maintenance of profile files. If any collections are specified in a profile, though, then all desired collections must be given explicitly. For example, a line selected_scheme scheme-small along with definitions for the installation directories (given below under "path options") suffices to install the "small" scheme with all default options. The schemes are described in the 'S' menu in the text installer, or equivalent. Besides 'selected_scheme', here is the list of variable names supported in a profile: *collection options* (prefix 'collection-') Collections are specified with a variable name with the prefix 'collection-' followed by a collection name; there is no value. For instance, 'collection-basic'. The collections are described in the 'C' menu. Schemes and collections (and packages) are ultimately defined by the files in the 'tlpkg/tlpsrc/' source directory. *path options* It is best to define all of these, even though they may not be used in the installation, so as to avoid unintentionally getting a default value that could cause problems later. TEXDIR TEXMFCONFIG TEXMFVAR TEXMFHOME TEXMFLOCAL TEXMFSYSCONFIG TEXMFSYSVAR *installer options* (prefix 'instopt_') 'instopt_adjustpath' (default 0 on Unix, 1 on Windows) Adjust 'PATH' environment variable. 'instopt_adjustrepo' (default 1) Set remote repository to a multiplexed CTAN mirror after installation; see '-repository' above. 'instopt_letter' (default 0) Set letter size paper as the default, instead of a4. 'instopt_portable' (default 0) Install for portable use, e.g., on a USB stick. 'instopt_write18_restricted' (default 1) Enable '\write18' for a restricted set of programs. *tlpdb options* (prefix 'tlpdbopt_') The definitive list is given in 'tlpkg/TeXLive/TLConfig.pm', in the hash '%TeXLive::TLConfig::TLPDBOptions', together with explanations. All items given there _except_ for 'tlpdbopt_location' can be specified. Here is the current list: tlpdbopt_autobackup tlpdbopt_backupdir tlpdbopt_create_formats tlpdbopt_desktop_integration tlpdbopt_file_assocs tlpdbopt_generate_updmap tlpdbopt_install_docfiles tlpdbopt_install_srcfiles tlpdbopt_post_code tlpdbopt_sys_bin tlpdbopt_sys_info tlpdbopt_sys_man tlpdbopt_w32_multi_user *platform options* (prefix 'binary_') For each supported platform in TeX Live (directories under 'bin/'), the variable 'binary_'_PLATFORM_ can be set with value 1. For example: binary_x86_64-linux 1 If no 'binary_' settings are made, the default is whatever the current machine is running. In releases before 2017, many profile variables had different names (not documented here; see the 'install-tl' source). They are accepted and transformed to the names given above. When a profile is written, the names above are always used. For more details on all of the above options, consult the TeX Live installation manual, linked from .  File: tlbuild.info, Node: install-tl ENVIRONMENT VARIABLES, Next: install-tl AUTHORS AND COPYRIGHT, Prev: install-tl PROFILES, Up: install-tl A.7 ENVIRONMENT VARIABLES ========================= For ease in scripting and debugging, 'install-tl' looks for the following environment variables. They are not of interest for normal user installations. 'TEXLIVE_DOWNLOADER' 'TL_DOWNLOAD_PROGRAM' 'TL_DOWNLOAD_ARGS' These override the normal choice of a download program; see the 'tlmgr' documentation, e.g., . 'TEXLIVE_INSTALL_ENV_NOCHECK' Omit the check for environment variables containing the string 'tex'. People developing TeX-related software are likely to have many such variables. 'TEXLIVE_INSTALL_NO_CONTEXT_CACHE' Omit creating the ConTeXt cache. This is useful for redistributors. 'TEXLIVE_INSTALL_NO_IMPORT' Omit check for installing on top of a previous installation and then asking about importing previous settings. 'TEXLIVE_INSTALL_NO_WELCOME' Omit printing the welcome message after successful installation, e.g., when testing. 'TEXLIVE_INSTALL_PREFIX' 'TEXLIVE_INSTALL_TEXDIR' 'TEXLIVE_INSTALL_TEXMFCONFIG' 'TEXLIVE_INSTALL_TEXMFVAR' 'TEXLIVE_INSTALL_TEXMFHOME' 'TEXLIVE_INSTALL_TEXMFLOCAL' 'TEXLIVE_INSTALL_TEXMFSYSCONFIG' 'TEXLIVE_INSTALL_TEXMFSYSVAR' Specify the respective directories. 'TEXLIVE_INSTALL_PREFIX' defaults to '/usr/local/texlive', while 'TEXLIVE_INSTALL_TEXDIR' defaults to the release directory within that prefix, e.g., '/usr/local/texlive/2016'. All the defaults can be seen by running the installer interactively and then typing 'D' for the directory menu. 'NOPERLDOC' Don't try to run the '--help' message through 'perldoc'.  File: tlbuild.info, Node: install-tl AUTHORS AND COPYRIGHT, Prev: install-tl ENVIRONMENT VARIABLES, Up: install-tl A.8 AUTHORS AND COPYRIGHT ========================= This script and its documentation were written for the TeX Live distribution () and both are licensed under the GNU General Public License Version 2 or later. $Id: install-tl 54143 2020-03-06 23:51:18Z karl $  File: tlbuild.info, Node: tlmgr, Next: Index, Prev: install-tl, Up: Top Appendix B tlmgr **************** * Menu: * tlmgr NAME:: * tlmgr SYNOPSIS:: * tlmgr DESCRIPTION:: * tlmgr EXAMPLES:: * tlmgr OPTIONS:: * tlmgr ACTIONS:: * tlmgr CONFIGURATION FILE FOR TLMGR:: * tlmgr CRYPTOGRAPHIC VERIFICATION:: * tlmgr USER MODE:: * tlmgr MULTIPLE REPOSITORIES:: * tlmgr GUI FOR TLMGR:: * tlmgr MACHINE-READABLE OUTPUT:: * tlmgr ENVIRONMENT VARIABLES:: * tlmgr AUTHORS AND COPYRIGHT::  File: tlbuild.info, Node: tlmgr NAME, Next: tlmgr SYNOPSIS, Up: tlmgr B.1 NAME ======== tlmgr - the native TeX Live Manager  File: tlbuild.info, Node: tlmgr SYNOPSIS, Next: tlmgr DESCRIPTION, Prev: tlmgr NAME, Up: tlmgr B.2 SYNOPSIS ============ tlmgr [_option_...] _action_ [_option_...] [_operand_...]  File: tlbuild.info, Node: tlmgr DESCRIPTION, Next: tlmgr EXAMPLES, Prev: tlmgr SYNOPSIS, Up: tlmgr B.3 DESCRIPTION =============== *tlmgr* manages an existing TeX Live installation, both packages and configuration options. For information on initially downloading and installing TeX Live, see . The most up-to-date version of this documentation (updated nightly from the development sources) is available at , along with procedures for updating 'tlmgr' itself and information about test versions. TeX Live is organized into a few top-level _schemes_, each of which is specified as a different set of _collections_ and _packages_, where a collection is a set of packages, and a package is what contains actual files. Schemes typically contain a mix of collections and packages, but each package is included in exactly one collection, no more and no less. A TeX Live installation can be customized and managed at any level. See for all the TeX Live documentation available.  File: tlbuild.info, Node: tlmgr EXAMPLES, Next: tlmgr OPTIONS, Prev: tlmgr DESCRIPTION, Up: tlmgr B.4 EXAMPLES ============ After successfully installing TeX Live, here are a few common operations with 'tlmgr': 'tlmgr option repository ctan' 'tlmgr option repository http://mirror.ctan.org/systems/texlive/tlnet' Tell 'tlmgr' to use a nearby CTAN mirror for future updates; useful if you installed TeX Live from the DVD image and want to have continuing updates. The two commands are equivalent; 'ctan' is just an alias for the given url. Caveat: 'mirror.ctan.org' resolves to many different hosts, and they are not perfectly synchronized; we recommend updating only daily (at most), and not more often. You can choose a particular mirror if problems; the list of all CTAN mirrors with the status of each is at . 'tlmgr update --list' Report what would be updated without actually updating anything. 'tlmgr update --all' Make your local TeX installation correspond to what is in the package repository (typically useful when updating from CTAN). 'tlmgr info' _what_ Display detailed information about a package _what_, such as the installation status and description, of searches for _what_ in all packages. For all the capabilities and details of 'tlmgr', please read the following voluminous information.  File: tlbuild.info, Node: tlmgr OPTIONS, Next: tlmgr ACTIONS, Prev: tlmgr EXAMPLES, Up: tlmgr B.5 OPTIONS =========== The following options to 'tlmgr' are global options, not specific to any action. All options, whether global or action-specific, can be given anywhere on the command line, and in any order. The first non-option argument will be the main action. In all cases, '--'_option_ and '-'_option_ are equivalent, and an '=' is optional between an option name and its value. *-repository* _url|path_ Specify the package repository from which packages should be installed or updated, either a local directory or network location, as below. This overridesthe default package repository found in the installation's TeX Live Package Database (a.k.a. the TLPDB, which is given entirely in the file 'tlpkg/texlive.tlpdb'). This '--repository' option changes the location only for the current run; to make a permanent change, use 'option repository' (see the *note option: tlmgr option. action). As an example, you can choose a particular CTAN mirror with something like this: -repository http://ctan.example.org/its/ctan/dir/systems/texlive/tlnet Of course a real hostname and its particular top-level CTAN directory have to be specified. The list of CTAN mirrors is available at . Here's an example of using a local directory: -repository /local/TL/repository For backward compatibility and convenience, '--location' and '--repo' are accepted as aliases for this option. Locations can be specified as any of the following: '/some/local/dir' 'file:/some/local/dir' Equivalent ways of specifying a local directory. 'ctan' 'http://mirror.ctan.org/systems/texlive/tlnet' Pick a CTAN mirror automatically, trying for one that is both nearby and up-to-date. The chosen mirror is used for the entire download. The bare 'ctan' is merely an alias for the full url. (See for more about CTAN and its mirrors.) 'http://server/path/to/tlnet' Standard HTTP. If the (default) LWP method is used, persistent connections are supported. TL can also use 'curl' or 'wget' to do the downloads, or an arbitrary user-specified program, as described in the 'tlmgr' documentation (). 'https://server/path/to/tlnet' Again, if the (default) LWP method is used, this supports persistent connections. Unfortunately, some versions of 'wget' and 'curl' do not support https, and even when 'wget' supports https, certificates may be rejected even when the certificate is fine, due to a lack of local certificate roots. The simplest workaround for this problem is to use http or ftp. 'ftp://server/path/to/tlnet' If the (default) LWP method is used, persistent connections are supported. 'user@machine:/path/to/tlnet' 'scp://user@machine/path/to/tlnet' 'ssh://user@machine/path/to/tlnet' These forms are equivalent; they all use 'scp' to transfer files. Using 'ssh-agent' is recommended. (Info: , .) If the repository is on the network, trailing '/' characters and/or trailing '/tlpkg' and/or '/archive' components are ignored. *-gui* [_action_] Two notable GUI front-ends for 'tlmgr', 'tlshell' and 'tlcockpit', are started up as separate programs; see their own documentation. 'tlmgr' itself has a graphical interface as well as the command line interface. You can give the option to invoke it, '--gui', together with an action to be brought directly into the respective screen of the GUI. For example, running tlmgr --gui update starts you directly at the update screen. If no action is given, the GUI will be started at the main screen. See *note GUI FOR TLMGR: tlmgr GUI FOR TLMGR. However, the native GUI requires Perl/TK, which is no longer included in TeX Live's Perl distribution for Windows. You may find 'tlshell' or 'tlcockpit' easier to work with. *-gui-lang* _llcode_ By default, the GUI tries to deduce your language from the environment (on Windows via the registry, on Unix via 'LC_MESSAGES'). If that fails you can select a different language by giving this option with a language code (based on ISO 639-1). Currently supported (but not necessarily completely translated) are: English (en, default), Czech (cs), German (de), French (fr), Italian (it), Japanese (ja), Dutch (nl), Polish (pl), Brazilian Portuguese (pt_BR), Russian (ru), Slovak (sk), Slovenian (sl), Serbian (sr), Ukrainian (uk), Vietnamese (vi), simplified Chinese (zh_CN), and traditional Chinese (zh_TW). tlshell shares its message catalog with tlmgr. *-debug-translation* In GUI mode, this switch tells 'tlmgr' to report any untranslated (or missing) messages to standard error. This can help translators to see what remains to be done. *-machine-readable* Instead of the normal output intended for human consumption, write (to standard output) a fixed format more suitable for machine parsing. See the *note MACHINE-READABLE OUTPUT: tlmgr MACHINE-READABLE OUTPUT. section below. *-no-execute-actions* Suppress the execution of the execute actions as defined in the tlpsrc files. Documented only for completeness, as this is only useful in debugging. *-package-logfile* _file_ 'tlmgr' logs all package actions (install, remove, update, failed updates, failed restores) to a separate log file, by default 'TEXMFSYSVAR/web2c/tlmgr.log'. This option allows you to specify a different file for the log. *-pause* This option makes 'tlmgr' wait for user input before exiting. Useful on Windows to avoid disappearing command windows. *-persistent-downloads* *-no-persistent-downloads* For network-based installations, this option (on by default) makes 'tlmgr' try to set up a persistent connection (using the 'LWP' Perl module). The idea is to open and reuse only one connection per session between your computer and the server, instead of initiating a new download for each package. If this is not possible, 'tlmgr' will fall back to using 'wget'. To disable these persistent connections, use '--no-persistent-downloads'. *-pin-file* Change the pinning file location from 'TEXMFLOCAL/tlpkg/pinning.txt' (see *note Pinning: tlmgr Pinning. below). Documented only for completeness, as this is only useful in debugging. *-usermode* Activates user mode for this run of 'tlmgr'; see *note USER MODE: tlmgr USER MODE. below. *-usertree* _dir_ Uses _dir_ for the tree in user mode; see *note USER MODE: tlmgr USER MODE. below. *-verify-repo=[none|main|all]* Defines the level of verification done: If 'none' is specified, no verification whatsoever is done. If 'main' is given and a working GnuPG ('gpg') binary is available, all repositories are checked, but only the main repository is required to be signed. If 'all' is given, then all repositories need to be signed. See *note CRYPTOGRAPHIC VERIFICATION: tlmgr CRYPTOGRAPHIC VERIFICATION. below for details. The standard options for TeX Live programs are also accepted: '--help/-h/-?', '--version', '-q' (no informational messages), '-v' (debugging messages, can be repeated). For the details about these, see the 'TeXLive::TLUtils' documentation. The '--version' option shows version information about the TeX Live release and about the 'tlmgr' script itself. If '-v' is also given, revision number for the loaded TeX Live Perl modules are shown, too.  File: tlbuild.info, Node: tlmgr ACTIONS, Next: tlmgr CONFIGURATION FILE FOR TLMGR, Prev: tlmgr OPTIONS, Up: tlmgr B.6 ACTIONS =========== * Menu: * tlmgr help:: * tlmgr version:: * tlmgr backup:: * tlmgr candidates _pkg_:: * tlmgr check [_option_...] [depends|executes|files|runfiles|texmfdbs|all]:: * tlmgr conf:: * tlmgr dump-tlpdb [_option_...] [--json]:: * tlmgr generate:: * tlmgr gui:: * tlmgr info:: * tlmgr init-usertree:: * tlmgr install [_option_...] _pkg_...:: * tlmgr key:: * tlmgr list:: * tlmgr option:: * tlmgr paper:: * tlmgr path:: * tlmgr pinning:: * tlmgr platform:: * tlmgr postaction:: * tlmgr print-platform:: * tlmgr print-platform-info:: * tlmgr remove [_option_...] _pkg_...:: * tlmgr repository:: * tlmgr restore:: * tlmgr search:: * tlmgr shell:: * tlmgr show:: * tlmgr uninstall:: * tlmgr update [_option_...] [_pkg_...]::  File: tlbuild.info, Node: tlmgr help, Next: tlmgr version, Up: tlmgr ACTIONS B.6.1 help ---------- Display this help information and exit (same as '--help', and on the web at ). Sometimes the 'perldoc' and/or 'PAGER' programs on the system have problems, resulting in control characters being literally output. This can't always be detected, but you can set the 'NOPERLDOC' environment variable and 'perldoc' will not be used.  File: tlbuild.info, Node: tlmgr version, Next: tlmgr backup, Prev: tlmgr help, Up: tlmgr ACTIONS B.6.2 version ------------- Gives version information (same as '--version'). If '-v' has been given the revisions of the used modules are reported, too.  File: tlbuild.info, Node: tlmgr backup, Next: tlmgr candidates _pkg_, Prev: tlmgr version, Up: tlmgr ACTIONS B.6.3 backup ------------ *backup [_option_...] -all* *backup [_option_...] _pkg_...* If the '--clean' option is not specified, this action makes a backup of the given packages, or all packages given '--all'. These backups are saved to the value of the '--backupdir' option, if that is an existing and writable directory. If '--backupdir' is not given, the 'backupdir' option setting in the TLPDB is used, if present. If both are missing, no backups are made. (The installer sets 'backupdir' to '.../tlpkg/backups', under the TL root installation directory, so it is usually defined; see the *note option: tlmgr option. description for more information.) If the '--clean' option is specified, backups are pruned (removed) instead of saved. The optional integer value _N_ may be specified to set the number of backups that will be retained when cleaning. If 'N' is not given, the value of the 'autobackup' option is used. If both are missing, an error is issued. For more details of backup pruning, see the 'option' action. Options: *-backupdir* _directory_ Overrides the 'backupdir' option setting in the TLPDB. The _directory_ argument is required and must specify an existing, writable directory where backups are to be placed. *-all* If '--clean' is not specified, make a backup of all packages in the TeX Live installation; this will take quite a lot of space and time. If '--clean' is specified, all packages are pruned. *-clean*[=_N_] Instead of making backups, prune the backup directory of old backups, as explained above. The optional integer argument _N_ overrides the 'autobackup' option set in the TLPDB. You must use '--all' or a list of packages together with this option, as desired. *-dry-run* Nothing is actually backed up or removed; instead, the actions to be performed are written to the terminal.  File: tlbuild.info, Node: tlmgr candidates _pkg_, Next: tlmgr check [_option_...] [depends|executes|files|runfiles|texmfdbs|all], Prev: tlmgr backup, Up: tlmgr ACTIONS B.6.4 candidates _pkg_ ---------------------- Shows the available candidate repositories for package _pkg_. See *note MULTIPLE REPOSITORIES: tlmgr MULTIPLE REPOSITORIES. below.  File: tlbuild.info, Node: tlmgr check [_option_...] [depends|executes|files|runfiles|texmfdbs|all], Next: tlmgr conf, Prev: tlmgr candidates _pkg_, Up: tlmgr ACTIONS B.6.5 check [_option_...] [depends|executes|files|runfiles|texmfdbs|all] ------------------------------------------------------------------------ Execute one (or all) check(s) of the consistency of the installation. If no problems are found, there will be no output. (To get a view of what is being done, run 'tlmgr -v check'.) *depends* Lists those packages which occur as dependencies in an installed collection, but are themselves not installed, and those packages which are not contained in any collection. If you call 'tlmgr check collections' this test will be carried out instead since former versions for 'tlmgr' called it that way. *executes* Check that the files referred to by 'execute' directives in the TeX Live Database are present. *files* Checks that all files listed in the local TLPDB ('texlive.tlpdb') are actually present, and lists those missing. *runfiles* List those filenames that are occurring more than one time in the runfiles sections, except for known duplicates. *texmfdbs* Checks related to the 'ls-R' files. If you have defined new trees, or changed the 'TEXMF' or 'TEXMFDBS' variables, it can't hurt to run this. It checks that: - all items in 'TEXMFDBS' have the '!!' prefix. - all items in 'TEXMFBDS' have an 'ls-R' file (if they exist at all). - all items in 'TEXMF' with '!!' are listed in 'TEXMFDBS'. - all items in 'TEXMF' with an 'ls-R' file are listed in 'TEXMFDBS'. Options: *-use-svn* Use the output of 'svn status' instead of listing the files; for checking the TL development repository. (This is run nightly.)  File: tlbuild.info, Node: tlmgr conf, Next: tlmgr dump-tlpdb [_option_...] [--json], Prev: tlmgr check [_option_...] [depends|executes|files|runfiles|texmfdbs|all], Up: tlmgr ACTIONS B.6.6 conf ---------- *conf [texmf|tlmgr|updmap [-conffile _file_] [-delete] [_key_ [_value_]]]* *conf auxtrees [-conffile _file_] [show|add|remove] [_value_]* With only 'conf', show general configuration information for TeX Live, including active configuration files, path settings, and more. This is like running 'texconfig conf', but works on all supported platforms. With one of 'conf texmf', 'conf tlmgr', or 'conf updmap', shows all key/value pairs (i.e., all settings) as saved in 'ROOT/texmf.cnf', the user-specific 'tlmgr' configuration file (see below), or the first found (via 'kpsewhich') 'updmap.cfg' file, respectively. If _key_ is given in addition, shows the value of only that _key_ in the respective file. If option _-delete_ is also given, the value in the given configuration file is entirely removed (not just commented out). If _value_ is given in addition, _key_ is set to _value_ in the respective file. _No error checking is done!_ The 'PATH' value shown by 'conf' is as used by 'tlmgr'. The directory in which the 'tlmgr' executable is found is automatically prepended to the PATH value inherited from the environment. Here is a practical example of changing configuration values. If the execution of (some or all) system commands via '\write18' was left enabled during installation, you can disable it afterwards: tlmgr conf texmf shell_escape 0 The subcommand 'auxtrees' allows adding and removing arbitrary additional texmf trees, completely under user control. 'auxtrees show' shows the list of additional trees, 'auxtrees add' _tree_ adds a tree to the list, and 'auxtrees remove' _tree_ removes a tree from the list (if present). The trees should not contain an 'ls-R' file (or files will not be found if the 'ls-R' becomes stale). This works by manipulating the Kpathsea variable 'TEXMFAUXTREES', in (by default) 'ROOT/texmf.cnf'. Example: tlmgr conf auxtrees add /quick/test/tree tlmgr conf auxtrees remove /quick/test/tree In all cases the configuration file can be explicitly specified via the option '--conffile' _file_, e.g., if you don't want to change the system-wide configuration. Warning: The general facility for changing configuration values is here, but tinkering with settings in this way is strongly discouraged. Again, no error checking on either keys or values is done, so any sort of breakage is possible.  File: tlbuild.info, Node: tlmgr dump-tlpdb [_option_...] [--json], Next: tlmgr generate, Prev: tlmgr conf, Up: tlmgr ACTIONS B.6.7 dump-tlpdb [_option_...] [-json] -------------------------------------- Dump complete local or remote TLPDB to standard output, as-is. The output is analogous to the '--machine-readable' output; see *note MACHINE-READABLE OUTPUT: tlmgr MACHINE-READABLE OUTPUT. section. Options: *-local* Dump the local TLPDB. *-remote* Dump the remote TLPDB. *-json* Instead of dumping the actual content, the database is dumped as JSON. For the format of JSON output see 'tlpkg/doc/JSON-formats.txt', format definition 'TLPDB'. Exactly one of '--local' and '--remote' must be given. In either case, the first line of the output specifies the repository location, in this format: "location-url" "\t" location where 'location-url' is the literal field name, followed by a tab, and _location_ is the file or url to the repository. Line endings may be either LF or CRLF depending on the current platform.  File: tlbuild.info, Node: tlmgr generate, Next: tlmgr gui, Prev: tlmgr dump-tlpdb [_option_...] [--json], Up: tlmgr ACTIONS B.6.8 generate -------------- *generate [_option_...] language* *generate [_option_...] language.dat* *generate [_option_...] language.def* *generate [_option_...] language.dat.lua* The 'generate' action overwrites any manual changes made in the respective files: it recreates them from scratch based on the information of the installed packages, plus local adaptions. The TeX Live installer and 'tlmgr' routinely call 'generate' for all of these files. For managing your own fonts, please read the 'updmap --help' information and/or . For managing your own formats, please read the 'fmtutil --help' information. In more detail: 'generate' remakes any of the configuration files 'language.dat', 'language.def', and 'language.dat.lua' from the information present in the local TLPDB, plus locally-maintained files. The locally-maintained files are 'language-local.dat', 'language-local.def', or 'language-local.dat.lua', searched for in 'TEXMFLOCAL' in the respective directories. If local additions are present, the final file is made by starting with the main file, omitting any entries that the local file specifies to be disabled, and finally appending the local file. (Historical note: The formerly supported 'updmap-local.cfg' and 'fmtutil-local.cnf' are no longer read, since 'updmap' and 'fmtutil' now reads and supports multiple configuration files. Thus, local additions can and should be put into an 'updmap.cfg' of 'fmtutil.cnf' file in 'TEXMFLOCAL'. The 'generate updmap' and 'generate fmtutil' actions no longer exist.) Local files specify entries to be disabled with a comment line, namely one of these: %!NAME --!NAME where 'language.dat' and 'language.def' use '%', and 'language.dat.lua' use '--'. In all cases, the _name_ is the respective format name or hyphenation pattern identifier. Examples: %!german --!usenglishmax (Of course, you're not likely to actually want to disable those particular items. They're just examples.) After such a disabling line, the local file can include another entry for the same item, if a different definition is desired. In general, except for the special disabling lines, the local files follow the same syntax as the master files. The form 'generate language' recreates all three files 'language.dat', 'language.def', and 'language.dat.lua', while the forms with an extension recreates only that given language file. Options: *-dest* _output_file_ specifies the output file (defaults to the respective location in 'TEXMFSYSVAR'). If '--dest' is given to 'generate language', it serves as a basename onto which '.dat' will be appended for the name of the 'language.dat' output file, '.def' will be appended to the value for the name of the 'language.def' output file, and '.dat.lua' to the name of the 'language.dat.lua' file. (This is just to avoid overwriting; if you want a specific name for each output file, we recommend invoking 'tlmgr' twice.) *-localcfg* _local_conf_file_ specifies the (optional) local additions (defaults to the respective location in 'TEXMFLOCAL'). *-rebuild-sys* tells 'tlmgr' to run necessary programs after config files have been regenerated. These are: 'fmtutil-sys --all' after 'generate fmtutil', 'fmtutil-sys --byhyphen .../language.dat' after 'generate language.dat', and 'fmtutil-sys --byhyphen .../language.def' after 'generate language.def'. These subsequent calls cause the newly-generated files to actually take effect. This is not done by default since those calls are lengthy processes and one might want to made several related changes in succession before invoking these programs. The respective locations are as follows: tex/generic/config/language.dat (and language-local.dat) tex/generic/config/language.def (and language-local.def) tex/generic/config/language.dat.lua (and language-local.dat.lua)  File: tlbuild.info, Node: tlmgr gui, Next: tlmgr info, Prev: tlmgr generate, Up: tlmgr ACTIONS B.6.9 gui --------- Start the graphical user interface. See *GUI* below.  File: tlbuild.info, Node: tlmgr info, Next: tlmgr init-usertree, Prev: tlmgr gui, Up: tlmgr ACTIONS B.6.10 info ----------- *info [_option_...] _pkg_...* *info [_option_...] collections* *info [_option_...] schemes* With no argument, lists all packages available at the package repository, prefixing those already installed with 'i'. With the single word 'collections' or 'schemes' as the argument, lists the request type instead of all packages. With any other arguments, display information about _pkg_: the name, category, short and long description, sizes, installation status, and TeX Live revision number. If _pkg_ is not locally installed, searches in the remote installation source. For normal packages (not collections or schemes), the sizes of the four groups of files (run/src/doc/bin files) are shown separately. For collections, the cumulative size is shown, including all directly-dependent packages (but not dependent collections). For schemes, the cumulative size is also shown, including all directly-dependent collections and packages. If _pkg_ is not found locally or remotely, the search action is used and lists matching packages and files. It also displays information taken from the TeX Catalogue, namely the package version, date, and license. Consider these, especially the package version, as approximations only, due to timing skew of the updates of the different pieces. By contrast, the 'revision' value comes directly from TL and is reliable. The former actions 'show' and 'list' are merged into this action, but are still supported for backward compatibility. Options: *-list* If the option '--list' is given with a package, the list of contained files is also shown, including those for platform-specific dependencies. When given with schemes and collections, '--list' outputs their dependencies in a similar way. *-only-installed* If this option is given, the installation source will not be used; only locally installed packages, collections, or schemes are listed. *-only-remote* Only list packages from the remote repository. Useful when checking what is available in a remote repository using 'tlmgr --repo ... --only-remote info'. Note that '--only-installed' and '--only-remote' cannot both be specified. *-data 'item1,item2,...'* If the option '--data' is given, its argument must be a comma separated list of field names from: 'name', 'category', 'localrev', 'remoterev', 'shortdesc', 'longdesc', 'installed', 'size', 'relocatable', 'depends', 'cat-version', 'cat-date', or 'cat-license'. In this case the requested packages' information is listed in CSV format one package per line, and the column information is given by the 'itemN'. The 'depends' column contains the name of all dependencies separated by ':'. *-json* In case '--json' is specified, the output is a JSON encoded array where each array element is the JSON representation of a single 'TLPOBJ' but with additional information. For details see 'tlpkg/doc/JSON-formats.txt', format definition: 'TLPOBJINFO'. If both '--json' and '--data' are given, '--json' takes precedence.  File: tlbuild.info, Node: tlmgr init-usertree, Next: tlmgr install [_option_...] _pkg_..., Prev: tlmgr info, Up: tlmgr ACTIONS B.6.11 init-usertree -------------------- Sets up a texmf tree for so-called user mode management, either the default user tree ('TEXMFHOME'), or one specified on the command line with '--usertree'. See *note USER MODE: tlmgr USER MODE. below.  File: tlbuild.info, Node: tlmgr install [_option_...] _pkg_..., Next: tlmgr key, Prev: tlmgr init-usertree, Up: tlmgr ACTIONS B.6.12 install [_option_...] _pkg_... ------------------------------------- Install each _pkg_ given on the command line, if it is not already installed. It does not touch existing packages; see the 'update' action for how to get the latest version of a package. By default this also installs all packages on which the given _pkg_s are dependent. Options: *-dry-run* Nothing is actually installed; instead, the actions to be performed are written to the terminal. *-file* Instead of fetching a package from the installation repository, use the package files given on the command line. These files must be standard TeX Live package files (with contained tlpobj file). *-force* If updates to 'tlmgr' itself (or other parts of the basic infrastructure) are present, 'tlmgr' will bail out and not perform the installation unless this option is given. Not recommended. *-no-depends* Do not install dependencies. (By default, installing a package ensures that all dependencies of this package are fulfilled.) *-no-depends-at-all* Normally, when you install a package which ships binary files the respective binary package will also be installed. That is, for a package 'foo', the package 'foo.i386-linux' will also be installed on an 'i386-linux' system. This option suppresses this behavior, and also implies '--no-depends'. Don't use it unless you are sure of what you are doing. *-reinstall* Reinstall a package (including dependencies for collections) even if it already seems to be installed (i.e, is present in the TLPDB). This is useful to recover from accidental removal of files in the hierarchy. When re-installing, only dependencies on normal packages are followed (i.e., not those of category Scheme or Collection). *-with-doc* *-with-src* While not recommended, the 'install-tl' program provides an option to omit installation of all documentation and/or source files. (By default, everything is installed.) After such an installation, you may find that you want the documentation or source files for a given package after all. You can get them by using these options in conjunction with '--reinstall', as in (using the 'fontspec' package as the example): tlmgr install --reinstall --with-doc --with-src fontspec This action does not automatically add new symlinks in system directories; you need to run 'tlmgr path add' (*note path: tlmgr path.) yourself if you are using this feature and want new symlinks added.  File: tlbuild.info, Node: tlmgr key, Next: tlmgr list, Prev: tlmgr install [_option_...] _pkg_..., Up: tlmgr ACTIONS B.6.13 key ---------- *key list* *key add _file_* *key remove _keyid_* The action 'key' allows listing, adding and removing additional GPG keys to the set of trusted keys, that is, those that are used to verify the TeX Live databases. With the 'list' argument, 'key' lists all keys. The 'add' argument requires another argument, either a filename or '-' for stdin, from which the key is added. The key is added to the local keyring 'GNUPGHOME/repository-keys.gpg', which is normally 'tlpkg/gpg/repository-keys.gpg'. The 'remove' argument requires a key id and removes the requested id from the local keyring.  File: tlbuild.info, Node: tlmgr list, Next: tlmgr option, Prev: tlmgr key, Up: tlmgr ACTIONS B.6.14 list ----------- Synonym for *note info: tlmgr info.  File: tlbuild.info, Node: tlmgr option, Next: tlmgr paper, Prev: tlmgr list, Up: tlmgr ACTIONS B.6.15 option ------------- *option [-json] [show]* *option [-json] showall|help* *option _key_ [_value_]* The first form, 'show', shows the global TeX Live settings currently saved in the TLPDB with a short description and the 'key' used for changing it in parentheses. The second form, 'showall', is similar, but also shows options which can be defined but are not currently set to any value ('help' is a synonym). Both 'show...' forms take an option '--json', which dumps the option information in JSON format. In this case, both forms dump the same data. For the format of the JSON output see 'tlpkg/doc/JSON-formats.txt', format definition 'TLOPTION'. In the third form, with _key_, if _value_ is not given, the setting for _key_ is displayed. If _value_ is present, _key_ is set to _value_. Possible values for _key_ are (run 'tlmgr option showall' for the definitive list): repository (default package repository), formats (generate formats at installation or update time), postcode (run postinst code blobs) docfiles (install documentation files), srcfiles (install source files), backupdir (default directory for backups), autobackup (number of backups to keep). sys_bin (directory to which executables are linked by the path action) sys_man (directory to which man pages are linked by the path action) sys_info (directory to which Info files are linked by the path action) desktop_integration (Windows-only: create Start menu shortcuts) fileassocs (Windows-only: change file associations) multiuser (Windows-only: install for all users) One common use of 'option' is to permanently change the installation to get further updates from the Internet, after originally installing from DVD. To do this, you can run tlmgr option repository http://mirror.ctan.org/systems/texlive/tlnet The 'install-tl' documentation has more information about the possible values for 'repository'. (For backward compatibility, 'location' can be used as a synonym for 'repository'.) If 'formats' is set (this is the default), then formats are regenerated when either the engine or the format files have changed. Disable this only when you know how and want to regenerate formats yourself whenever needed (which is often, in practice). The 'postcode' option controls execution of per-package postinstallation action code. It is set by default, and again disabling is not likely to be of interest except to developers doing debugging. The 'docfiles' and 'srcfiles' options control the installation of their respective file groups (documentation, sources; grouping is approximate) per package. By default both are enabled (1). Either or both can be disabled (set to 0) if disk space is limited or for minimal testing installations, etc. When disabled, the respective files are not downloaded at all. The options 'autobackup' and 'backupdir' determine the defaults for the actions 'update', 'backup' and 'restore'. These three actions need a directory in which to read or write the backups. If '--backupdir' is not specified on the command line, the 'backupdir' option value is used (if set). The TL installer sets 'backupdir' to '.../tlpkg/backups', under the TL root installation directory. The 'autobackup' option (de)activates automatic generation of backups. Its value is an integer. If the 'autobackup' value is '-1', no backups are removed. If 'autobackup' is 0 or more, it specifies the number of backups to keep. Thus, backups are disabled if the value is 0. In the '--clean' mode of the 'backup' action this option also specifies the number to be kept. The default value is 1, so that backups are made, but only one backup is kept. To setup 'autobackup' to '-1' on the command line, use: tlmgr option -- autobackup -1 The '--' avoids having the '-1' treated as an option. (The '--' stops parsing for options at the point where it appears; this is a general feature across most Unix programs.) The 'sys_bin', 'sys_man', and 'sys_info' options are used on Unix systems to control the generation of links for executables, Info files and man pages. See the 'path' action for details. The last three options affect behavior on Windows installations. If 'desktop_integration' is set, then some packages will install items in a sub-folder of the Start menu for 'tlmgr gui', documentation, etc. If 'fileassocs' is set, Windows file associations are made (see also the 'postaction' action). Finally, if 'multiuser' is set, then adaptions to the registry and the menus are done for all users on the system instead of only the current user. All three options are on by default.  File: tlbuild.info, Node: tlmgr paper, Next: tlmgr path, Prev: tlmgr option, Up: tlmgr ACTIONS B.6.16 paper ------------ *paper [a4|letter]* *<[xdvi|pdftex|dvips|dvipdfmx|context|psutils] paper [_papersize_|-list]*> *paper -json* With no arguments ('tlmgr paper'), shows the default paper size setting for all known programs. With one argument (e.g., 'tlmgr paper a4'), sets the default for all known programs to that paper size. With a program given as the first argument and no paper size specified (e.g., 'tlmgr dvips paper'), shows the default paper size for that program. With a program given as the first argument and a paper size as the last argument (e.g., 'tlmgr dvips paper a4'), set the default for that program to that paper size. With a program given as the first argument and '--list' given as the last argument (e.g., 'tlmgr dvips paper --list'), shows all valid paper sizes for that program. The first size shown is the default. If '--json' is specified without other options, the paper setup is dumped in JSON format. For the format of JSON output see 'tlpkg/doc/JSON-formats.txt', format definition 'TLPAPER'. Incidentally, this syntax of having a specific program name before the 'paper' keyword is unusual. It is inherited from the longstanding 'texconfig' script, which supports other configuration settings for some programs, notably 'dvips'. 'tlmgr' does not support those extra settings.  File: tlbuild.info, Node: tlmgr path, Next: tlmgr pinning, Prev: tlmgr paper, Up: tlmgr ACTIONS B.6.17 path ----------- *path [-w32mode=user|admin] add* *path [-w32mode=user|admin] remove* On Unix, adds or removes symlinks for executables, man pages, and info pages in the system directories specified by the respective options (see the *note option: tlmgr option. description above). Does not change any initialization files, either system or personal. Furthermore, any executables added or removed by future updates are not taken care of automatically; this command must be rerun as needed. On Windows, the registry part where the binary directory is added or removed is determined in the following way: If the user has admin rights, and the option '--w32mode' is not given, the setting _w32_multi_user_ determines the location (i.e., if it is on then the system path, otherwise the user path is changed). If the user has admin rights, and the option '--w32mode' is given, this option determines the path to be adjusted. If the user does not have admin rights, and the option '--w32mode' is not given, and the setting _w32_multi_user_ is off, the user path is changed, while if the setting _w32_multi_user_ is on, a warning is issued that the caller does not have enough privileges. If the user does not have admin rights, and the option '--w32mode' is given, it must be 'user' and the user path will be adjusted. If a user without admin rights uses the option '--w32mode admin' a warning is issued that the caller does not have enough privileges.  File: tlbuild.info, Node: tlmgr pinning, Next: tlmgr platform, Prev: tlmgr path, Up: tlmgr ACTIONS B.6.18 pinning -------------- The 'pinning' action manages the pinning file, see *note Pinning: tlmgr Pinning. below. 'pinning show' Shows the current pinning data. 'pinning add' _repo_ _pkgglob_... Pins the packages matching the _pkgglob_(s) to the repository _repo_. 'pinning remove' _repo_ _pkgglob_... Any packages recorded in the pinning file matching the s for the given repository _repo_ are removed. 'pinning remove _repo_ --all' Remove all pinning data for repository _repo_.  File: tlbuild.info, Node: tlmgr platform, Next: tlmgr postaction, Prev: tlmgr pinning, Up: tlmgr ACTIONS B.6.19 platform --------------- *platform list|add|remove _platform_...* *platform set _platform_* *platform set auto* 'platform list' lists the TeX Live names of all the platforms (a.k.a. architectures), ('i386-linux', ...) available at the package repository. 'platform add' _platform_... adds the executables for each given platform _platform_ to the installation from the repository. 'platform remove' _platform_... removes the executables for each given platform _platform_ from the installation, but keeps the currently running platform in any case. 'platform set' _platform_ switches TeX Live to always use the given platform instead of auto detection. 'platform set auto' switches TeX Live to auto detection mode for platform. Platform detection is needed to select the proper 'xz' and 'wget' binaries that are shipped with TeX Live. 'arch' is a synonym for 'platform'. Options: *-dry-run* Nothing is actually installed; instead, the actions to be performed are written to the terminal.  File: tlbuild.info, Node: tlmgr postaction, Next: tlmgr print-platform, Prev: tlmgr platform, Up: tlmgr ACTIONS B.6.20 postaction ----------------- *postaction [_option_...] install [shortcut|fileassoc|script] [_pkg_...]* *postaction [_option_...] remove [shortcut|fileassoc|script] [_pkg_...]* Carry out the postaction 'shortcut', 'fileassoc', or 'script' given as the second required argument in install or remove mode (which is the first required argument), for either the packages given on the command line, or for all if '--all' is given. Options: *-w32mode=[user|admin]* If the option '--w32mode' is given the value 'user', all actions will only be carried out in the user-accessible parts of the registry/filesystem, while the value 'admin' selects the system-wide parts of the registry for the file associations. If you do not have enough permissions, using '--w32mode=admin' will not succeed. *-fileassocmode=[1|2]* '--fileassocmode' specifies the action for file associations. If it is set to 1 (the default), only new associations are added; if it is set to 2, all associations are set to the TeX Live programs. (See also 'option fileassocs'.) *-all* Carry out the postactions for all packages  File: tlbuild.info, Node: tlmgr print-platform, Next: tlmgr print-platform-info, Prev: tlmgr postaction, Up: tlmgr ACTIONS B.6.21 print-platform --------------------- Print the TeX Live identifier for the detected platform (hardware/operating system) combination to standard output, and exit. '--print-arch' is a synonym.  File: tlbuild.info, Node: tlmgr print-platform-info, Next: tlmgr remove [_option_...] _pkg_..., Prev: tlmgr print-platform, Up: tlmgr ACTIONS B.6.22 print-platform-info -------------------------- Print the TeX Live platform identifier, TL platform long name, and original output from guess.  File: tlbuild.info, Node: tlmgr remove [_option_...] _pkg_..., Next: tlmgr repository, Prev: tlmgr print-platform-info, Up: tlmgr ACTIONS B.6.23 remove [_option_...] _pkg_... ------------------------------------ Remove each _pkg_ specified. Removing a collection removes all package dependencies (unless '--no-depends' is specified), but not any collection dependencies of that collection. However, when removing a package, dependencies are never removed. Options: *-all* Uninstalls all of TeX Live, asking for confirmation unless '--force' is also specified. *-backup* *-backupdir* _directory_ These options behave just as with the *note update: (update)tlmgr update [_option_...] [...]. action (q.v.), except they apply to making backups of packages before they are removed. The default is to make such a backup, that is, to save a copy of packages before removal. The *note restore: tlmgr restore. action explains how to restore from a backup. *-no-depends* Do not remove dependent packages. *-no-depends-at-all* See above under *note install: tlmgr install [_option_...] _pkg_... (and beware). *-force* By default, removal of a package or collection that is a dependency of another collection or scheme is not allowed. With this option, the package will be removed unconditionally. Use with care. A package that has been removed using the '--force' option because it is still listed in an installed collection or scheme will not be updated, and will be mentioned as 'forcibly removed' in the output of 'tlmgr update --list'. *-dry-run* Nothing is actually removed; instead, the actions to be performed are written to the terminal. This action does not automatically remove symlinks to executables from system directories; you need to run 'tlmgr path remove' (*note path: tlmgr path.) yourself if you are using this feature and want stale symlinks removed.  File: tlbuild.info, Node: tlmgr repository, Next: tlmgr restore, Prev: tlmgr remove [_option_...] _pkg_..., Up: tlmgr ACTIONS B.6.24 repository ----------------- *repository list* *repository list _path|url|tag_* *repository add _path_ [_tag_]* *repository remove _path|tag_* *repository set _path_[#_tag_] [_path_[#_tag_] ...]* *repository status* This action manages the list of repositories. See *note (MULTIPLE_REPOSITORIES):: below for detailed explanations. The first form, 'repository list', lists all configured repositories and the respective tags if set. If a path, url, or tag is given after the 'list' keyword, it is interpreted as the source from which to initialize a TL database and lists the contained packages. This can also be an otherwise-unused repository, either local or remote. If the option '--with-platforms' is specified in addition, for each package the available platforms (if any) are also listed. The form 'repository add' adds a repository (optionally attaching a tag) to the list of repositories, while 'repository remove' removes a repository, either by full path/url, or by tag. The form 'repository set' sets the list of available repositories to the items given on the command line, overwriting previous settings. The form 'repository status' reports the verification status of the loaded repositories with the format of one repository per line with fields separated by a single space: The tag (which can be the same as the url); = the url; = iff machine-readable output is specified, the verification code (a number); = a textual description of the verification status, as the last field extending to the end of line. That is, in normal (not machine-readable) output, the third field (numeric verification status) is not present. In all cases, one of the repositories must be tagged as 'main'; otherwise, all operations will fail!  File: tlbuild.info, Node: tlmgr restore, Next: tlmgr search, Prev: tlmgr repository, Up: tlmgr ACTIONS B.6.25 restore -------------- *restore [_option_...] _pkg_ [_rev_]* *restore [_option_...] -all* Restore a package from a previously-made backup. If '--all' is given, try to restore the latest revision of all package backups found in the backup directory. Otherwise, if neither _pkg_ nor _rev_ are given, list the available backup revisions for all packages. With _pkg_ given but no _rev_, list all available backup revisions of _pkg_. When listing available packages, 'tlmgr' shows the revision, and in parenthesis the creation time if available (in format yyyy-mm-dd hh:mm). If (and only if) both _pkg_ and a valid revision number _rev_ are specified, try to restore the package from the specified backup. Options: *-all* Try to restore the latest revision of all package backups found in the backup directory. Additional non-option arguments (like _pkg_) are not allowed. *-backupdir* _directory_ Specify the directory where the backups are to be found. If not given it will be taken from the configuration setting in the TLPDB. *-dry-run* Nothing is actually restored; instead, the actions to be performed are written to the terminal. *-force* Don't ask questions. *-json* When listing backups, the option '--json' turn on JSON output. The format is an array of JSON objects ('name', 'rev', 'date'). For details see 'tlpkg/doc/JSON-formats.txt', format definition: 'TLBACKUPS'. If both '--json' and '--data' are given, '--json' takes precedence.  File: tlbuild.info, Node: tlmgr search, Next: tlmgr shell, Prev: tlmgr restore, Up: tlmgr ACTIONS B.6.26 search ------------- *search [_option_...] _what_* *search [_option_...] -file _what_* *search [_option_...] -all _what_* By default, search the names, short descriptions, and long descriptions of all locally installed packages for the argument _what_, interpreted as a (Perl) regular expression. Options: *-file* List all filenames containing _what_. *-all* Search everything: package names, descriptions and filenames. *-global* Search the TeX Live Database of the installation medium, instead of the local installation. *-word* Restrict the search of package names and descriptions (but not filenames) to match only full words. For example, searching for 'table' with this option will not output packages containing the word 'tables' (unless they also contain the word 'table' on its own).  File: tlbuild.info, Node: tlmgr shell, Next: tlmgr show, Prev: tlmgr search, Up: tlmgr ACTIONS B.6.27 shell ------------ Starts an interactive mode, where tlmgr prompts for commands. This can be used directly, or for scripting. The first line of output is 'protocol' _n_, where _n_ is an unsigned number identifying the protocol version (currently 1). In general, tlmgr actions that can be given on the command line translate to commands in this shell mode. For example, you can say 'update --list' to see what would be updated. The TLPDB is loaded the first time it is needed (not at the beginning), and used for the rest of the session. Besides these actions, a few commands are specific to shell mode: protocol Print 'protocol _n_', the current protocol version. help Print pointers to this documentation. version Print tlmgr version information. quit, end, bye, byebye, EOF Exit. restart Restart 'tlmgr shell' with the original command line; most useful when developing 'tlmgr'. load [local|remote] Explicitly load the local or remote, respectively, TLPDB. save Save the local TLPDB, presumably after other operations have changed it. get [_var_] =item set [_var_ [_val_]] Get the value of _var_, or set it to _val_. Possible _var_ names: 'debug-translation', 'machine-readable', 'no-execute-actions', 'require-verification', 'verify-downloads', 'repository', and 'prompt'. All except 'repository' and 'prompt' are booleans, taking values 0 and 1, and behave like the corresponding command line option. The 'repository' variable takes a string, and sets the remote repository location. The 'prompt' variable takes a string, and sets the current default prompt. If _var_ or then _val_ is not specified, it is prompted for.  File: tlbuild.info, Node: tlmgr show, Next: tlmgr uninstall, Prev: tlmgr shell, Up: tlmgr ACTIONS B.6.28 show ----------- Synonym for *note info: tlmgr info.  File: tlbuild.info, Node: tlmgr uninstall, Next: tlmgr update [_option_...] [_pkg_...], Prev: tlmgr show, Up: tlmgr ACTIONS B.6.29 uninstall ---------------- Synonym for *note remove: tlmgr remove [_option_...] _pkg_....  File: tlbuild.info, Node: tlmgr update [_option_...] [_pkg_...], Prev: tlmgr uninstall, Up: tlmgr ACTIONS B.6.30 update [_option_...] [_pkg_...] -------------------------------------- Updates the packages given as arguments to the latest version available at the installation source. Either '--all' or at least one _pkg_ name must be specified. Options: *-all* Update all installed packages except for 'tlmgr' itself. If updates to 'tlmgr' itself are present, this gives an error, unless also the option '--force' or '--self' is given. (See below.) In addition to updating the installed packages, during the update of a collection the local installation is (by default) synchronized to the status of the collection on the server, for both additions and removals. This means that if a package has been removed on the server (and thus has also been removed from the respective collection), 'tlmgr' will remove the package in the local installation. This is called "auto-remove" and is announced as such when using the option '--list'. This auto-removal can be suppressed using the option '--no-auto-remove' (not recommended, see option description). Analogously, if a package has been added to a collection on the server that is also installed locally, it will be added to the local installation. This is called "auto-install" and is announced as such when using the option '--list'. This auto-installation can be suppressed using the option '--no-auto-install' (also not recommended). An exception to the collection dependency checks (including the auto-installation of packages just mentioned) are those that have been "forcibly removed" by you, that is, you called 'tlmgr remove --force' on them. (See the 'remove' action documentation.) To reinstall any such forcibly removed packages use '--reinstall-forcibly-removed'. To reiterate: automatic removals and additions are entirely determined by comparison of collections. Thus, if you manually install an individual package 'foo' which is later removed from the server, 'tlmgr' will not notice and will not remove it locally. (It has to be this way, without major rearchitecture work, because the tlpdb does not record the repository from which packages come from.) If you want to exclude some packages from the current update run (e.g., due to a slow link), see the '--exclude' option below. *-self* Update 'tlmgr' itself (that is, the infrastructure packages) if updates to it are present. On Windows this includes updates to the private Perl interpreter shipped inside TeX Live. If this option is given together with either '--all' or a list of packages, then 'tlmgr' will be updated first and, if this update succeeds, the new version will be restarted to complete the rest of the updates. In short: tlmgr update --self # update infrastructure only tlmgr update --self --all # update infrastructure and all packages tlmgr update --force --all # update all packages but *not* infrastructure # ... this last at your own risk, not recommended! *-dry-run* Nothing is actually installed; instead, the actions to be performed are written to the terminal. This is a more detailed report than '--list'. *-list* [_pkg_] Concisely list the packages which would be updated, newly installed, or removed, without actually changing anything. If '--all' is also given, all available updates are listed. If '--self' is given, but not '--all', only updates to the critical packages (tlmgr, texlive infrastructure, perl on Windows, etc.) are listed. If neither '--all' nor '--self' is given, and in addition no _pkg_ is given, then '--all' is assumed (thus, 'tlmgr update --list' is the same as 'tlmgr update --list --all'). If neither '--all' nor '--self' is given, but specific package names are given, those packages are checked for updates. *-exclude* _pkg_ Exclude _pkg_ from the update process. If this option is given more than once, its arguments accumulate. An argument _pkg_ excludes both the package _pkg_ itself and all its related platform-specific packages _pkg.ARCH_. For example, tlmgr update --all --exclude a2ping will not update 'a2ping', 'a2ping.i386-linux', or any other 'a2ping.'_ARCH_ package. If this option specifies a package that would otherwise be a candidate for auto-installation, auto-removal, or reinstallation of a forcibly removed package, 'tlmgr' quits with an error message. Excludes are not supported in these circumstances. This option can also be set permanently in the tlmgr config file with the key 'update-exclude'. *-no-auto-remove* [_pkg_...] By default, 'tlmgr' tries to remove packages in an existing collection which have disappeared on the server, as described above under '--all'. This option prevents such removals, either for all packages (with '--all'), or for just the given _pkg_ names. This can lead to an inconsistent TeX installation, since packages are not infrequently renamed or replaced by their authors. Therefore this is not recommended. *-no-auto-install* [_pkg_...] Under normal circumstances 'tlmgr' will install packages which are new on the server, as described above under '--all'. This option prevents any such automatic installation, either for all packages (with '--all'), or the given _pkg_ names. Furthermore, after the 'tlmgr' run using this has finished, the packages that would have been auto-installed _will be considered as forcibly removed_. So, if 'foobar' is the only new package on the server, then tlmgr update --all --no-auto-install is equivalent to tlmgr update --all tlmgr remove --force foobar Again, since packages are sometimes renamed or replaced, using this option is not recommended. *-reinstall-forcibly-removed* Under normal circumstances 'tlmgr' will not install packages that have been forcibly removed by the user; that is, removed with 'remove --force', or whose installation was prohibited by '--no-auto-install' during an earlier update. This option makes 'tlmgr' ignore the forcible removals and re-install all such packages. This can be used to completely synchronize an installation with the server's idea of what is available: tlmgr update --reinstall-forcibly-removed --all *-backup* *-backupdir* _directory_ These two options control the creation of backups of packages _before_ updating; that is, backing up packages as currently installed. If neither option is given, no backup will made. If '--backupdir' is given and specifies a writable directory then a backup will be made in that location. If only '--backup' is given, then a backup will be made to the directory previously set via the *note option: tlmgr option. action (see below). If both are given then a backup will be made to the specified _directory_. You can also set options via the *note option: tlmgr option. action to automatically make backups for all packages, and/or keep only a certain number of backups. 'tlmgr' always makes a temporary backup when updating packages, in case of download or other failure during an update. In contrast, the purpose of this '--backup' option is to save a persistent backup in case the actual _content_ of the update causes problems, e.g., introduces an TeX incompatibility. The *note restore: tlmgr restore. action explains how to restore from a backup. *-no-depends* If you call for updating a package normally all depending packages will also be checked for updates and updated if necessary. This switch suppresses this behavior. *-no-depends-at-all* See above under *note install: tlmgr install [_option_...] _pkg_... (and beware). *-force* Force update of normal packages, without updating 'tlmgr' itself (unless the '--self' option is also given). Not recommended. Also, 'update --list' is still performed regardless of this option. If the package on the server is older than the package already installed (e.g., if the selected mirror is out of date), 'tlmgr' does not downgrade. Also, packages for uninstalled platforms are not installed. 'tlmgr' saves a copy of the 'texlive.tlpdb' file used for an update with a suffix representing the repository url, as in 'tlpkg/texlive.tlpdb.'_long-hash-string_. These can be useful for fallback information, but if you don't like them accumulating (e.g., 'mirror.ctan.org' resolves to many different hosts, each resulting in a possibly different hash), it's harmless to delete them. This action does not automatically add or remove new symlinks in system directories; you need to run 'tlmgr' *note path: tlmgr path. yourself if you are using this feature and want new symlinks added.  File: tlbuild.info, Node: tlmgr CONFIGURATION FILE FOR TLMGR, Next: tlmgr CRYPTOGRAPHIC VERIFICATION, Prev: tlmgr ACTIONS, Up: tlmgr B.7 CONFIGURATION FILE FOR TLMGR ================================ 'tlmgr' reads two configuration files: one is system-wide, in 'TEXMFSYSCONFIG/tlmgr/config', and the other is user-specific, in 'TEXMFCONFIG/tlmgr/config'. The user-specific one is the default for the 'conf tlmgr' action. (Run 'kpsewhich -var-value=TEXMFSYSCONFIG' or '... TEXMFCONFIG ...' to see the actual directory names.) A few defaults corresponding to command-line options can be set in these configuration files. In addition, the system-wide file can contain a directive to restrict the allowed actions. In these config files, empty lines and lines starting with # are ignored. All other lines must look like: key = value where the spaces are optional but the '=' is required. The allowed keys are: 'auto-remove', value 0 or 1 (default 1), same as command-line option. 'gui-expertmode', value 0 or 1 (default 1). This switches between the full GUI and a simplified GUI with only the most common settings. 'gui-lang' _llcode_, with a language code value as with the command-line option. 'no-checksums', value 0 or 1 (default 0, see below). 'persistent-downloads', value 0 or 1 (default 1), same as command-line option. 'require-verification', value 0 or 1 (default 0), same as command-line option. 'update-exclude', value: comma-separated list of packages (no space allowed). Same as the command line option '--exclude' for the action 'update'. 'verify-downloads', value 0 or 1 (default 1), same as command-line option. The system-wide config file can contain one additional key: 'allowed-actions' _action1_ [,_action_,...] The value is a comma-separated list of 'tlmgr' actions which are allowed to be executed when 'tlmgr' is invoked in system mode (that is, without '--usermode'). This allows distributors to include the 'tlmgr' in their packaging, but allow only a restricted set of actions that do not interfere with their distro package manager. For native TeX Live installations, it doesn't make sense to set this. The 'no-checksums' key needs more explanation. By default, package checksums computed and stored on the server (in the TLPDB) are compared to checksums computed locally after downloading. 'no-checksums' disables this process. The checksum algorithm is SHA-512. Your system must have one of (looked for in this order) the Perl 'Digest::SHA' module, the 'openssl' program (), the 'sha512sum' program (from GNU Coreutils, ), or finally the 'shasum' program (just to support old Macs). If none of these are available, a warning is issued and 'tlmgr' proceeds without checking checksums. (Incidentally, other SHA implementations, such as the pure Perl and pure Lua modules, are much too slow to be usable in our context.) 'no-checksums' avoids the warning.  File: tlbuild.info, Node: tlmgr CRYPTOGRAPHIC VERIFICATION, Next: tlmgr USER MODE, Prev: tlmgr CONFIGURATION FILE FOR TLMGR, Up: tlmgr B.8 CRYPTOGRAPHIC VERIFICATION ============================== 'tlmgr' and 'install-tl' perform cryptographic verification if possible. If verification is performed and successful, the programs report '(verified)' after loading the TLPDB; otherwise, they report '(not verified)'. But either way, by default the installation and/or updates proceed normally. If a program named 'gpg' is available (that is, found in 'PATH'), by default cryptographic signatures will be checked: we require the main repository be signed, but not any additional repositories. If 'gpg' is not available, by default signatures are not checked and no verification is carried out, but 'tlmgr' still proceeds normally. The behavior of the verification can be controlled by the command line and config file option 'verify-repo' which takes one of the following values: 'none', 'main', or 'all'. With 'none', no verification whatsoever is attempted. With 'main' (the default) verification is required only for the main repository, and only if 'gpg' is available; though attempted for all, missing signatures of subsidiary repositories will not result in an error. Finally, in the case of 'all', 'gpg' must be available and all repositories need to be signed. In all cases, if a signature is checked and fails to verify, an error is raised. Cryptographic verification requires checksum checking (described just above) to succeed, and a working GnuPG ('gpg') program (see below for search method). Then, unless cryptographic verification has been disabled, a signature file ('texlive.tlpdb.*.asc') of the checksum file is downloaded and the signature verified. The signature is created by the TeX Live Distribution GPG key 0x0D5E5D9106BAB6BC, which in turn is signed by Karl Berry's key 0x0716748A30D155AD and Norbert Preining's key 0x6CACA448860CDC13. All of these keys are obtainable from the standard key servers. Additional trusted keys can be added using the 'key' action. * Menu: * tlmgr Configuration of GnuPG invocation::  File: tlbuild.info, Node: tlmgr Configuration of GnuPG invocation, Up: tlmgr CRYPTOGRAPHIC VERIFICATION B.8.1 Configuration of GnuPG invocation --------------------------------------- The executable used for GnuPG is searched as follows: If the environment variable 'TL_GNUPG' is set, it is tested and used; otherwise 'gpg' is checked; finally 'gpg2' is checked. Further adaptation of the 'gpg' invocation can be made using the two environment variables 'TL_GNUPGHOME', which is passed to 'gpg' as the value for '--homedir', and 'TL_GNUPGARGS', which replaces the default options '--no-secmem-warning --no-permission-warning'.  File: tlbuild.info, Node: tlmgr USER MODE, Next: tlmgr MULTIPLE REPOSITORIES, Prev: tlmgr CRYPTOGRAPHIC VERIFICATION, Up: tlmgr B.9 USER MODE ============= 'tlmgr' provides a restricted way, called "user mode", to manage arbitrary texmf trees in the same way as the main installation. For example, this allows people without write permissions on the installation location to update/install packages into a tree of their own. 'tlmgr' is switched into user mode with the command line option '--usermode'. It does not switch automatically, nor is there any configuration file setting for it. Thus, this option has to be explicitly given every time user mode is to be activated. This mode of 'tlmgr' works on a user tree, by default the value of the 'TEXMFHOME' variable. This can be overridden with the command line option '--usertree'. In the following when we speak of the user tree we mean either 'TEXMFHOME' or the one given on the command line. Not all actions are allowed in user mode; 'tlmgr' will warn you and not carry out any problematic actions. Currently not supported (and probably will never be) is the 'platform' action. The 'gui' action is currently not supported, but may be in a future release. Some 'tlmgr' actions don't need any write permissions and thus work the same in user mode and normal mode. Currently these are: 'check', 'help', 'list', 'print-platform', 'print-platform-info', 'search', 'show', 'version'. On the other hand, most of the actions dealing with package management do need write permissions, and thus behave differently in user mode, as described below: 'install', 'update', 'remove', 'option', 'paper', 'generate', 'backup', 'restore', 'uninstall', 'symlinks'. Before using 'tlmgr' in user mode, you have to set up the user tree with the 'init-usertree' action. This creates _usertree_'/web2c' and _usertree_'/tlpkg/tlpobj', and a minimal _usertree_'/tlpkg/texlive.tlpdb'. At that point, you can tell 'tlmgr' to do the (supported) actions by adding the '--usermode' command line option. In user mode the file _usertree_'/tlpkg/texlive.tlpdb' contains only the packages that have been installed into the user tree using 'tlmgr', plus additional options from the "virtual" package '00texlive.installation' (similar to the main installation's 'texlive.tlpdb'). All actions on packages in user mode can only be carried out on packages that are known as 'relocatable'. This excludes all packages containing executables and a few other core packages. Of the 2500 or so packages currently in TeX Live the vast majority are relocatable and can be installed into a user tree. Description of changes of actions in user mode: * Menu: * tlmgr User mode install:: * tlmgr User mode backup, restore, remove, update:: * tlmgr User mode generate, option, paper::  File: tlbuild.info, Node: tlmgr User mode install, Next: tlmgr User mode backup, restore, remove, update, Up: tlmgr USER MODE B.9.1 User mode install ----------------------- In user mode, the 'install' action checks that the package and all dependencies are all either relocated or already installed in the system installation. If this is the case, it unpacks all containers to be installed into the user tree (to repeat, that's either 'TEXMFHOME' or the value of '--usertree') and add the respective packages to the user tree's 'texlive.tlpdb' (creating it if need be). Currently installing a collection in user mode installs all dependent packages, but in contrast to normal mode, does _not_ install dependent collections. For example, in normal mode 'tlmgr install collection-context' would install 'collection-basic' and other collections, while in user mode, _only_ the packages mentioned in 'collection-context' are installed. If a package shipping map files is installed in user mode, a backup of the user's 'updmap.cfg' in 'USERTREE/web2c/' is made, and then this file regenerated from the list of installed packages.  File: tlbuild.info, Node: tlmgr User mode backup, restore, remove, update, Next: tlmgr User mode generate, option, paper, Prev: tlmgr User mode install, Up: tlmgr USER MODE B.9.2 User mode backup, restore, remove, update ----------------------------------------------- In user mode, these actions check that all packages to be acted on are installed in the user tree before proceeding; otherwise, they behave just as in normal mode.  File: tlbuild.info, Node: tlmgr User mode generate, option, paper, Prev: tlmgr User mode backup, restore, remove, update, Up: tlmgr USER MODE B.9.3 User mode generate, option, paper --------------------------------------- In user mode, these actions operate only on the user tree's configuration files and/or 'texlive.tlpdb'. creates configuration files in user tree  File: tlbuild.info, Node: tlmgr MULTIPLE REPOSITORIES, Next: tlmgr GUI FOR TLMGR, Prev: tlmgr USER MODE, Up: tlmgr B.10 MULTIPLE REPOSITORIES ========================== The main TeX Live repository contains a vast array of packages. Nevertheless, additional local repositories can be useful to provide locally-installed resources, such as proprietary fonts and house styles. Also, alternative package repositories distribute packages that cannot or should not be included in TeX Live, for whatever reason. The simplest and most reliable method is to temporarily set the installation source to any repository (with the '-repository' or 'option repository' command line options), and perform your operations. When you are using multiple repositories over a sustained length of time, however, explicitly switching between them becomes inconvenient. Thus, it's possible to tell 'tlmgr' about additional repositories you want to use. The basic command is 'tlmgr repository add'. The rest of this section explains further. When using multiple repositories, one of them has to be set as the main repository, which distributes most of the installed packages. When you switch from a single repository installation to a multiple repository installation, the previous sole repository will be set as the main repository. By default, even if multiple repositories are configured, packages are _still_ _only_ installed from the main repository. Thus, simply adding a second repository does not actually enable installation of anything from there. You also have to specify which packages should be taken from the new repository, by specifying so-called "pinning" rules, described next. * Menu: * tlmgr Pinning::  File: tlbuild.info, Node: tlmgr Pinning, Up: tlmgr MULTIPLE REPOSITORIES B.10.1 Pinning -------------- When a package 'foo' is pinned to a repository, a package 'foo' in any other repository, even if it has a higher revision number, will not be considered an installable candidate. As mentioned above, by default everything is pinned to the main repository. Let's now go through an example of setting up a second repository and enabling updates of a package from it. First, check that we have support for multiple repositories, and have only one enabled (as is the case by default): $ tlmgr repository list List of repositories (with tags if set): /var/www/norbert/tlnet Ok. Let's add the 'tlcontrib' repository (this is a real repository hosted at ) with the tag 'tlcontrib': $ tlmgr repository add http://contrib.texlive.info/current tlcontrib Check the repository list again: $ tlmgr repository list List of repositories (with tags if set): http://contrib.texlive.info/current (tlcontrib) /var/www/norbert/tlnet (main) Now we specify a pinning entry to get the package 'classico' from 'tlcontrib': $ tlmgr pinning add tlcontrib classico Check that we can find 'classico': $ tlmgr show classico package: classico ... shortdesc: URW Classico fonts ... - install 'classico': $ tlmgr install classico tlmgr: package repositories: ... [1/1, ??:??/??:??] install: classico @tlcontrib [737k] In the output here you can see that the 'classico' package has been installed from the 'tlcontrib' repository ('@tlcontrib'). Finally, 'tlmgr pinning' also supports removing certain or all packages from a given repository: $ tlmgr pinning remove tlcontrib classico # remove just classico $ tlmgr pinning remove tlcontrib --all # take nothing from tlcontrib A summary of 'tlmgr pinning' actions is given above.  File: tlbuild.info, Node: tlmgr GUI FOR TLMGR, Next: tlmgr MACHINE-READABLE OUTPUT, Prev: tlmgr MULTIPLE REPOSITORIES, Up: tlmgr B.11 GUI FOR TLMGR ================== The graphical user interface for 'tlmgr' requires Perl/Tk . For Unix-based systems Perl/Tk (as well as Perl of course) has to be installed outside of TL. has a list of invocations for some distros. For Windows the necessary modules are no longer shipped within TeX Live, so you'll have to have an external Perl available that includes them. We are talking here about the GUI built into tlmgr itself, not about the other tlmgr GUIs, which are: tlshell (Tcl/Tk-based), tlcockpit (Java-based) and, only on Macs, TeX Live Utility. These are invoked as separate programs. The GUI mode of tlmgr is started with the invocation 'tlmgr gui'; assuming Tk is loadable, the graphical user interface will be shown. The main window contains a menu bar, the main display, and a status area where messages normally shown on the console are displayed. Within the main display there are three main parts: the 'Display configuration' area, the list of packages, and the action buttons. Also, at the top right the currently loaded repository is shown; this also acts as a button and when clicked will try to load the default repository. To load a different repository, see the 'tlmgr' menu item. Finally, the status area at the bottom of the window gives additional information about what is going on. * Menu: * tlmgr Main display:: * tlmgr Menu bar:: * tlmgr GUI options::  File: tlbuild.info, Node: tlmgr Main display, Next: tlmgr Menu bar, Up: tlmgr GUI FOR TLMGR B.11.1 Main display ------------------- * Menu: * tlmgr Display configuration area:: * tlmgr Package list area:: * tlmgr Main display action buttons::  File: tlbuild.info, Node: tlmgr Display configuration area, Next: tlmgr Package list area, Up: tlmgr Main display B.11.1.1 Display configuration area ................................... The first part of the main display allows you to specify (filter) which packages are shown. By default, all are shown. Changes here are reflected right away. Status Select whether to show all packages (the default), only those installed, only those _not_ installed, or only those with update available. Category Select which categories are shown: packages, collections, and/or schemes. These are briefly explained in the *note DESCRIPTION: tlmgr DESCRIPTION. section above. Match Select packages matching for a specific pattern. By default, this searches both descriptions and filenames. You can also select a subset for searching. Selection Select packages to those selected, those not selected, or all. Here, "selected" means that the checkbox in the beginning of the line of a package is ticked. Display configuration buttons To the right there are three buttons: select all packages, select none (a.k.a. deselect all), and reset all these filters to the defaults, i.e., show all available.  File: tlbuild.info, Node: tlmgr Package list area, Next: tlmgr Main display action buttons, Prev: tlmgr Display configuration area, Up: tlmgr Main display B.11.1.2 Package list area .......................... The second are of the main display lists all installed packages. If a repository is loaded, those that are available but not installed are also listed. Double clicking on a package line pops up an informational window with further details: the long description, included files, etc. Each line of the package list consists of the following items: a checkbox Used to select particular packages; some of the action buttons (see below) work only on the selected packages. package name The name (identifier) of the package as given in the database. local revision (and version) If the package is installed the TeX Live revision number for the installed package will be shown. If there is a catalogue version given in the database for this package, it will be shown in parentheses. However, the catalogue version, unlike the TL revision, is not guaranteed to reflect what is actually installed. remote revision (and version) If a repository has been loaded the revision of the package in the repository (if present) is shown. As with the local column, if a catalogue version is provided it will be displayed. And also as with the local column, the catalogue version may be stale. short description The short description of the package.  File: tlbuild.info, Node: tlmgr Main display action buttons, Prev: tlmgr Package list area, Up: tlmgr Main display B.11.1.3 Main display action buttons .................................... Below the list of packages are several buttons: Update all installed This calls 'tlmgr update --all', i.e., tries to update all available packages. Below this button is a toggle to allow reinstallation of previously removed packages as part of this action. The other four buttons only work on the selected packages, i.e., those where the checkbox at the beginning of the package line is ticked. Update Update only the selected packages. Install Install the selected packages; acts like 'tlmgr install', i.e., also installs dependencies. Thus, installing a collection installs all its constituent packages. Remove Removes the selected packages; acts like 'tlmgr remove', i.e., it will also remove dependencies of collections (but not dependencies of normal packages). Backup Makes a backup of the selected packages; acts like 'tlmgr backup'. This action needs the option 'backupdir' set (see 'Options -' General>).  File: tlbuild.info, Node: tlmgr Menu bar, Next: tlmgr GUI options, Prev: tlmgr Main display, Up: tlmgr GUI FOR TLMGR B.11.2 Menu bar --------------- The following entries can be found in the menu bar: 'tlmgr' menu The items here load various repositories: the default as specified in the TeX Live database, the default network repository, the repository specified on the command line (if any), and an arbitrarily manually-entered one. Also has the so-necessary 'quit' operation. 'Options menu' Provides access to several groups of options: 'Paper' (configuration of default paper sizes), 'Platforms' (only on Unix, configuration of the supported/installed platforms), 'GUI Language' (select language used in the GUI interface), and 'General' (everything else). Several toggles are also here. The first is 'Expert options', which is set by default. If you turn this off, the next time you start the GUI a simplified screen will be shown that display only the most important functionality. This setting is saved in the configuration file of 'tlmgr'; see *note CONFIGURATION FILE FOR TLMGR: tlmgr CONFIGURATION FILE FOR TLMGR. for details. The other toggles are all off by default: for debugging output, to disable the automatic installation of new packages, and to disable the automatic removal of packages deleted from the server. Playing with the choices of what is or isn't installed may lead to an inconsistent TeX Live installation; e.g., when a package is renamed. 'Actions menu' Provides access to several actions: update the filename database (aka 'ls-R', 'mktexlsr', 'texhash'), rebuild all formats ('fmtutil-sys --all'), update the font map database ('updmap-sys'), restore from a backup of a package, and use of symbolic links in system directories (not on Windows). The final action is to remove the entire TeX Live installation (also not on Windows). 'Help menu' Provides access to the TeX Live manual (also on the web at ) and the usual "About" box.  File: tlbuild.info, Node: tlmgr GUI options, Prev: tlmgr Menu bar, Up: tlmgr GUI FOR TLMGR B.11.3 GUI options ------------------ Some generic Perl/Tk options can be specified with 'tlmgr gui' to control the display: '-background' _color_ Set background color. '-font "' _fontname_ _fontsize_ '"' Set font, e.g., 'tlmgr gui -font "helvetica 18"'. The argument to '-font' must be quoted, i.e., passed as a single string. '-foreground' _color_ Set foreground color. '-geometry' _geomspec_ Set the X geometry, e.g., 'tlmgr gui -geometry 1024x512-0+0' creates the window of (approximately) the given size in the upper-right corner of the display. '-xrm' _xresource_ Pass the arbitrary X resource string _xresource_. A few other obscure options are recognized but not mentioned here. See the Perl/Tk documentation () for the complete list, and any X documentation for general information.  File: tlbuild.info, Node: tlmgr MACHINE-READABLE OUTPUT, Next: tlmgr ENVIRONMENT VARIABLES, Prev: tlmgr GUI FOR TLMGR, Up: tlmgr B.12 MACHINE-READABLE OUTPUT ============================ With the '--machine-readable' option, 'tlmgr' writes to stdout in the fixed line-oriented format described here, and the usual informational messages for human consumption are written to stderr (normally they are written to stdout). The idea is that a program can get all the information it needs by reading stdout. Currently this option only applies to the *note update: tlmgr update [_option_...] [_pkg_...], *note install: tlmgr install [_option_...] _pkg_..., and *note option: tlmgr option. actions. * Menu: * tlmgr Machine-readable update and install output:: * tlmgr Machine-readable option output::  File: tlbuild.info, Node: tlmgr Machine-readable update and install output, Next: tlmgr Machine-readable option output, Up: tlmgr MACHINE-READABLE OUTPUT B.12.1 Machine-readable 'update' and 'install' output ----------------------------------------------------- The output format is as follows: fieldname "\t" value ... "end-of-header" pkgname status localrev serverrev size runtime esttot ... "end-of-updates" other output from post actions, not in machine readable form The header section currently has two fields: 'location-url' (the repository source from which updates are being drawn), and 'total-bytes' (the total number of bytes to be downloaded). The _localrev_ and _serverrev_ fields for each package are the revision numbers in the local installation and server repository, respectively. The _size_ field is the number of bytes to be downloaded, i.e., the size of the compressed tar file for a network installation, not the unpacked size. The runtime and esttot fields are only present for updated and auto-install packages, and contain the currently passed time since start of installation/updates and the estimated total time. Line endings may be either LF or CRLF depending on the current platform. 'location-url' _location_ The _location_ may be a url (including 'file:///foo/bar/...'), or a directory name ('/foo/bar'). It is the package repository from which the new package information was drawn. 'total-bytes' _count_ The _count_ is simply a decimal number, the sum of the sizes of all the packages that need updating or installing (which are listed subsequently). Then comes a line with only the literal string 'end-of-header'. Each following line until a line with literal string 'end-of-updates' reports on one package. The fields on each line are separated by a tab. Here are the fields. _pkgname_ The TeX Live package identifier, with a possible platform suffix for executables. For instance, 'pdftex' and 'pdftex.i386-linux' are given as two separate packages, one on each line. _status_ The status of the package update. One character, as follows: 'd' The package was removed on the server. 'f' The package was removed in the local installation, even though a collection depended on it. (E.g., the user ran 'tlmgr remove --force'.) 'u' Normal update is needed. 'r' Reversed non-update: the locally-installed version is newer than the version on the server. 'a' Automatically-determined need for installation, the package is new on the server and is (most probably) part of an installed collection. 'i' Package will be installed and isn't present in the local installation (action install). 'I' Package is already present but will be reinstalled (action install). _localrev_ The revision number of the installed package, or '-' if it is not present locally. _serverrev_ The revision number of the package on the server, or '-' if it is not present on the server. _size_ The size in bytes of the package on the server. The sum of all the package sizes is given in the 'total-bytes' header field mentioned above. _runtime_ The run time since start of installations or updates. _esttot_ The estimated total time.  File: tlbuild.info, Node: tlmgr Machine-readable option output, Prev: tlmgr Machine-readable update and install output, Up: tlmgr MACHINE-READABLE OUTPUT B.12.2 Machine-readable 'option' output --------------------------------------- The output format is as follows: key "\t" value If a value is not saved in the database the string '(not set)' is shown. If you are developing a program that uses this output, and find that changes would be helpful, do not hesitate to write the mailing list.  File: tlbuild.info, Node: tlmgr ENVIRONMENT VARIABLES, Next: tlmgr AUTHORS AND COPYRIGHT, Prev: tlmgr MACHINE-READABLE OUTPUT, Up: tlmgr B.13 ENVIRONMENT VARIABLES ========================== 'tlmgr' uses many of the standard TeX environment variables, as reported by, e.g., 'tlmgr conf' (*note conf: tlmgr conf.). In addition, for ease in scripting and debugging, 'tlmgr' looks for the following environment variables. These are not of interest for normal user installations. 'TEXLIVE_COMPRESSOR' This variable allows selecting a different compressor program for backups and intermediate rollback containers. The order of selection is: 1. If the environment variable 'TEXLIVE_COMPRESSOR' is defined, use it; abort if it doesn't work. Possible values: 'lz4', 'gzip', 'xz'. The necessary options are added internally. 2. If lz4 is available (either from the system or TL) and working, use that. 3. If gzip is available (from the system) and working, use that. 4. If xz is available (either from the system or TL) and working, use that. lz4 and gzip are faster in creating tlmgr's local backups, hence they are preferred. The unconditional use of xz for the tlnet containers is unaffected, to minimize download sizes. 'TEXLIVE_DOWNLOADER' 'TL_DOWNLOAD_PROGRAM' 'TL_DOWNLOAD_ARGS' These options allow selecting different download programs then the ones automatically selected by the installer. The order of selection is: 1. If the environment variable 'TEXLIVE_DOWNLOADER' is defined, use it; abort if the specified program doesn't work. Possible values: 'lwp', 'curl', 'wget'. The necessary options are added internally. 2. If the environment variable 'TL_DOWNLOAD_PROGRAM' is defined (can be any value), use it together with 'TL_DOWNLOAD_ARGS'; abort if it doesn't work. 3. If LWP is available and working, use that (by far the most efficient method, as it supports persistent downloads). 4. If curl is available (from the system) and working, use that. 5. If wget is available (either from the system or TL) and working, use that. TL provides 'wget' binaries for platforms where necessary, so some download method should always be available. 'TEXLIVE_PREFER_OWN' By default, compression and download programs provided by the system, i.e., found along 'PATH' are preferred over those shipped with TeX Live. This can create problems with systems that are too old, and so can be overridden by setting the environment variable 'TEXLIVE_PREFER_OWN' to 1. In this case, executables shipped with TL will be preferred. Extra compression/download programs not provided by TL, such as gzip, lwp, and curl, are still checked for on the system and used if available, per the above. 'TEXLIVE_PREFER_OWN' only applies when the program being checked for is shipped with TL, namely the lz4 and xz compressors and wget downloader. Exception: on Windows, the 'tar.exe' shipped with TL is always used, regardless of any setting.  File: tlbuild.info, Node: tlmgr AUTHORS AND COPYRIGHT, Prev: tlmgr ENVIRONMENT VARIABLES, Up: tlmgr B.14 AUTHORS AND COPYRIGHT ========================== This script and its documentation were written for the TeX Live distribution () and both are licensed under the GNU General Public License Version 2 or later. $Id: tlmgr.pl 54118 2020-03-05 22:27:22Z karl $  File: tlbuild.info, Node: Index, Prev: tlmgr, Up: Top Index ***** [index] * Menu: * --bindir configure option: --prefix --bindir .... (line 6) * --bindir configure option <1>: --enable-multiplatform. (line 6) * --build=HOST: Cross configuring. (line 6) * --disable-all-packages: Build one package. (line 6) * --disable-all-pkgs: --disable-all-pkgs. (line 6) * --disable-bibtex8: Configure options for texk/bibtex-x. (line 9) * --disable-bibtexu: Configure options for texk/bibtex-x. (line 12) * --disable-dump-share: Configure options for texk/web2c. (line 27) * --disable-dvipdfmx: Configure options for texk/dvipdfm-x. (line 12) * --disable-etex-synctex: Configure options for texk/web2c. (line 59) * --disable-ipc: Configure options for texk/web2c. (line 31) * --disable-largefile: --disable-largefile. (line 6) * --disable-linked-scripts: Configure options for texk/texlive. (line 6) * --disable-mf-nowin: Configure options for texk/web2c. (line 34) * --disable-missing: --disable-missing. (line 6) * --disable-native-texlive-build: --disable-native-texlive-build. (line 6) * --disable-PROG: --enable-PROG --disable-PROG. (line 6) * --disable-synctex: Configure options for texk/web2c. (line 64) * --disable-tex: Configure options for texk/web2c. (line 37) * --disable-web-progs: Configure options for texk/web2c. (line 41) * --disable-xdvipdfmx: Configure options for texk/dvipdfm-x. (line 15) * --enable-*win for Metafont window support: Configure options for texk/web2c. (line 55) * --enable-auto-core: Configure options for texk/web2c. (line 45) * --enable-compiler-warnings=LEVEL: --enable-compiler-warnings=LEVEL. (line 6) * --enable-cxx-runtime-hack: Macros for compilers. (line 29) * --enable-etex: Configure options for texk/web2c. (line 37) * --enable-libtool-hack: Configure options for texk/web2c. (line 50) * --enable-maintainer-mode: Build system tools. (line 28) * --enable-maintainer-mode <1>: --enable-maintainer-mode. (line 6) * --enable-missing to ignore dependencies: Build one package. (line 71) * --enable-mktextfm-default: kpathsea library. (line 18) * --enable-multiplatform: --enable-multiplatform. (line 6) * --enable-PROG: --enable-PROG --disable-PROG. (line 6) * --enable-shared: --enable-shared. (line 6) * --enable-silent-rules: --enable-silent-rules. (line 6) * --enable-tex-synctex: Configure options for texk/web2c. (line 59) * --enable-texlive-build: --disable-native-texlive-build. (line 15) * --enable-xi2-scrolling: Configure options for texk/xdvik. (line 13) * --enable-xindy-docs: Configure options for utils/xindy. (line 10) * --enable-xindy-rules: Configure options for utils/xindy. (line 6) * --host=HOST: Cross configuring. (line 6) * --libdir configure option: --enable-multiplatform. (line 6) * --no-clean Build option: Build problems. (line 6) * --prefix configure option: --prefix --bindir .... (line 6) * --with-banner-add=STR: Configure options for texk/web2c. (line 6) * --with-clisp-runtime=FILENAME: Configure options for utils/xindy. (line 14) * --with-editor=CMD: Configure options for texk/web2c. (line 11) * --with-fontconfig-includes=DIR: Configure options for texk/web2c. (line 16) * --with-fontconfig-libdir=DIR: Configure options for texk/web2c. (line 16) * --with-gs=FILENAME: Configure options for texk/xdvik. (line 6) * --with-LIB-includes=DIR, -libdir: Library-specific configure options. (line 16) * --with-libgs-includes, -libdir: Configure options for texk/dvisvgm. (line 17) * --with-system-kpathsea: kpathsea library. (line 13) * --with-system-LIB: Adding a new generic library module. (line 34) * --with-system-LIB <1>: Library-specific configure options. (line 9) * --with-system-libgs: Configure options for texk/dvisvgm. (line 6) * --with-system-poppler: Configure options for system poppler. (line 11) * --with-system-xpdf: Configure options for system poppler. (line 15) * --with-xdvi-x-toolkit: xdvik package. (line 21) * --with-xdvi-x-toolkit=KIT: Configure options for texk/xdvik. (line 9) * --without-libgs: Configure options for texk/dvisvgm. (line 12) * --without-ln-s: --without-ln-s. (line 6) * --without-x: --without-x. (line 6) * -C configure option: Build in parallel. (line 11) * -j make option: Build in parallel. (line 6) * adapting TeX Live for distros: Distro builds. (line 54) * adding a new generic library: Adding a new generic library module. (line 6) * adding a new program: Adding a new program module. (line 6) * adding a new TeX-specific library: Adding a new TeX-specific library module. (line 6) * adding to TeX Live: Extending TeX Live. (line 6) * am/ top-level directory: Top-level directories. (line 14) * ANSI C: Declarations and definitions. (line 6) * ApplicationServices Mac framework, required by xetex: Prerequisites. (line 31) * asymptote: Linked scripts. (line 23) * asymptote <1>: asymptote. (line 6) * Autoconf: Overview of build system. (line 6) * autoconf macros: Autoconf macros. (line 6) * Automake: Overview of build system. (line 6) * biber: Linked scripts. (line 23) * bibtex-x: Configure options for texk/bibtex-x. (line 6) * bibtex8: Configure options for texk/bibtex-x. (line 6) * bibtexu: Configure options for texk/bibtex-x. (line 6) * BSD distro: Distro builds. (line 6) * build directory, required: Building. (line 17) * build iteration: Build iteration. (line 6) * build on demand: Build one package. (line 6) * build one engine: Build one engine. (line 6) * build one package: Build one package. (line 6) * build problems: Build problems. (line 6) * Build script: Building. (line 6) * build system, design of: Overview of build system. (line 6) * build-aux/ top-level directory: Top-level directories. (line 30) * BUILDCC, BUILDCFLAGS, ...: Cross configuring. (line 42) * building: Building. (line 6) * building a distribution: Build distribution. (line 6) * building in parallel: Build in parallel. (line 6) * C++11, removing dependent sources: Build one package. (line 64) * C++11, required: Prerequisites. (line 15) * C, ANSI, required: Declarations and definitions. (line 6) * C99, avoided: Declarations and definitions. (line 6) * cache file, for configure: Build in parallel. (line 11) * cache for configure: Build in parallel. (line 6) * callexe.c: Macros for Windows. (line 32) * CC: Variables for configure. (line 10) * CC=C-COMPILER: Build one package. (line 78) * CC_BUILD: Cross problems. (line 13) * chktex: Declarations and definitions. (line 18) * clisp: Variables for configure. (line 18) * CLISP: Variables for configure. (line 17) * CLISP <1>: Configure options for utils/xindy. (line 14) * clisp, required by xindy: Prerequisites. (line 35) * Cocoa Mac framework, required by xetex: Prerequisites. (line 31) * coding conventions: Coding conventions. (line 6) * compilers, C and C++11: Prerequisites. (line 6) * config.guess, config.sub, ...: Top-level directories. (line 30) * configure options: Configure options. (line 6) * configure options, for bibtex-x: Configure options for texk/bibtex-x. (line 6) * configure options, for dvipdfm-x: Configure options for texk/dvipdfm-x. (line 6) * configure options, for dvisvgm: Configure options for texk/dvisvgm. (line 6) * configure options, for kpathsea: Configure options for kpathsea. (line 6) * configure options, for system poppler: Configure options for system poppler. (line 6) * configure options, for texk/texlive: Configure options for texk/texlive. (line 6) * configure options, for web2c: Configure options for texk/web2c. (line 6) * configure options, for xdvik: Configure options for texk/xdvik. (line 6) * configure options, for xindy: Configure options for utils/xindy. (line 6) * configure options, global: Global configure options. (line 6) * configure options, library-specific: Library-specific configure options. (line 6) * configure options, program-specific: Program-specific configure options. (line 6) * configure variables: Variables for configure. (line 6) * configuring, for cross compilation: Cross configuring. (line 6) * const: Const. (line 6) * continuous integration: Continuous integration. (line 6) * conventions, coding: Coding conventions. (line 6) * CPPFLAGS: Variables for configure. (line 12) * cross compilation: Cross compilation. (line 6) * cross compilation configuring: Cross configuring. (line 6) * cross compilation problems: Cross problems. (line 6) * cross compilation, with host binary: xdvik package. (line 14) * ctangle: Cross problems. (line 26) * CXX: Variables for configure. (line 11) * CXX=C++-COMPILER: Build one package. (line 78) * declarations and definitions, in source code: Declarations and definitions. (line 6) * declarations before statements, avoiding: Declarations and definitions. (line 6) * dependencies, with several output files: Build in parallel. (line 6) * DESTDIR: --prefix --bindir .... (line 9) * directories, for installation: Installation directories. (line 6) * directories, top-level: Top-level directories. (line 6) * discards qualifiers warning: Const. (line 30) * dist and distcheck targets for make: Build distribution. (line 6) * distribution tarball, making: Build distribution. (line 6) * distro, building for: Distro builds. (line 6) * dvipdfm-x: Configure options for texk/dvipdfm-x. (line 6) * dvipdfmx: Configure options for texk/dvipdfm-x. (line 6) * dvisvgm: Configure options for texk/dvisvgm. (line 6) * engine, building one: Build one engine. (line 6) * environment variables, for configure: Configure options. (line 16) * exec_prefix: --enable-multiplatform. (line 6) * extending TeX Live: Extending TeX Live. (line 6) * extern functions: Declarations and definitions. (line 41) * failure to build: Build problems. (line 6) * flags, macros for library and header: Macros for library and header flags. (line 6) * fontconfig library, required by xetex: Prerequisites. (line 31) * FreeType: Prerequisites. (line 11) * freetype cross compiling: Cross problems. (line 13) * freetype library: freetype library. (line 6) * freetype-config: freetype library. (line 13) * freetype-config <1>: Variables for configure. (line 24) * FT2_CONFIG: Variables for configure. (line 21) * gcc, default compilers: Build one package. (line 78) * general setup macros: General setup macros. (line 6) * generic library module, adding: Adding a new generic library module. (line 6) * Ghostscript location for Xdvik: Configure options for texk/xdvik. (line 6) * git-svn: Transfer from Subversion to Github. (line 6) * global configure options: Global configure options. (line 6) * gmake, required: Prerequisites. (line 11) * GNU make, required: Prerequisites. (line 11) * GNU tools, needed for building: Build system tools. (line 6) * GNU/Linux distro: Distro builds. (line 6) * Gnulib, used for common files: Top-level directories. (line 30) * ICU cross compiling: Cross problems. (line 20) * ICU libraries: Variables for configure. (line 24) * icu-config: Variables for configure. (line 24) * ICU_CONFIG: Variables for configure. (line 22) * infrastructure, tools needed for: Build system tools. (line 6) * inst/ top-level directory: Top-level directories. (line 39) * install-tl, TeX Live installer: Installing. (line 8) * installation directories: Installation directories. (line 6) * installing: Installing. (line 6) * interprocess communication: Configure options for texk/web2c. (line 31) * introduction: Introduction. (line 6) * iteration through sources, by configure and make: Build iteration. (line 6) * kpathsea library: kpathsea library. (line 6) * kpathsea.ac: kpathsea library. (line 18) * kpse-libpng-flags.m4: png library. (line 46) * kpse-pkgs.m4: Overview of build system. (line 30) * kpse-zlib-flags.m4: zlib library. (line 6) * kpsewhich: Variables for configure. (line 30) * KPSEWHICH: Variables for configure. (line 29) * KPSE_ADD_FLAGS: Macros for library and header flags. (line 20) * KPSE_ALL_SYSTEM_FLAGS: Adding a new generic library module. (line 34) * KPSE_BASIC: General setup macros. (line 8) * KPSE_CHECK_LATEX: Macros for programs. (line 8) * KPSE_CHECK_PDFLATEX: Macros for programs. (line 15) * KPSE_CHECK_PERL: Macros for programs. (line 18) * KPSE_CHECK_WIN32: Macros for Windows. (line 9) * KPSE_COMMON: General setup macros. (line 16) * KPSE_COMPILER_VISIBILITY: Macros for compilers. (line 18) * KPSE_COMPILER_WARNINGS: Macros for compilers. (line 8) * KPSE_COND_MINGW32: Macros for Windows. (line 19) * KPSE_COND_WIN32: Macros for Windows. (line 15) * KPSE_COND_WIN32_WRAP: Macros for Windows. (line 24) * kpse_cv_cxx_hack: Macros for compilers. (line 33) * kpse_cv_have_win32: Macros for Windows. (line 10) * kpse_cv_visibility_c[xx]flags: Macros for compilers. (line 25) * kpse_cv_warning_cflags: Macros for compilers. (line 15) * KPSE_CXX_HACK: Macros for compilers. (line 28) * KPSE_ENABLE_PROG: Adding a new program module. (line 14) * KPSE_LARGEFILE: Macros for libraries. (line 8) * KPSE_LIBPNG_FLAGS: Macros for library and header flags. (line 10) * KPSE_LIBPNG_FLAGS <1>: png library. (line 46) * kpse_libs_pkgs: Adding a new generic library module. (line 6) * KPSE_LIB_FLAGS: Macros for library and header flags. (line 6) * KPSE_LIB_FLAGS <1>: Adding a new generic library module. (line 26) * KPSE_LIB_SYSTEM_FLAGS: Adding a new generic library module. (line 34) * KPSE_PROG_LEX: Macros for programs. (line 21) * KPSE_RESTORE_FLAGS: Macros for library and header flags. (line 24) * kpse_texk_pkgs: Adding a new program module. (line 6) * kpse_texlibs_pkgs: Adding a new TeX-specific library module. (line 11) * KPSE_TRY_LIB: png library. (line 18) * KPSE_TRY_LIB <1>: Adding a new generic library module. (line 20) * KPSE_TRY_LIBXX: png library. (line 31) * KPSE_TRY_LIBXX <1>: Adding a new generic library module. (line 20) * kpse_utils_pkgs: Adding a new program module. (line 10) * KPSE_WIN32_CALL: Macros for Windows. (line 31) * KPSE_WITH_LIB: Adding a new generic library module. (line 11) * KPSE_WITH_TEXLIB: Adding a new TeX-specific library module. (line 14) * large file support: --disable-largefile. (line 6) * LATEX: Variables for configure. (line 40) * layout of sources: Layout and infrastructure. (line 6) * LFS (large file support): --disable-largefile. (line 6) * libexpat, dependency of libfontconfig: Configure options for texk/web2c. (line 50) * libfontconfig, hack for avoiding linking dependencies: Configure options for texk/web2c. (line 50) * libfreetype: Variables for configure. (line 24) * libfreetype, and const: Const. (line 21) * libpng library: png library. (line 6) * library module, generic, adding: Adding a new generic library module. (line 6) * library module, TeX-specific, adding: Adding a new TeX-specific library module. (line 6) * library modules: Library modules. (line 6) * library-specific configure options: Library-specific configure options. (line 6) * libsigsegv, required by xindy: Prerequisites. (line 35) * libstc++, statically linking: Macros for compilers. (line 29) * Libtool: Overview of build system. (line 6) * libtool, hack for avoiding excessive linking: Configure options for texk/web2c. (line 50) * libXt: Configure options for texk/web2c. (line 22) * linked scripts: Linked scripts. (line 6) * linking C++ libraries statically: Macros for compilers. (line 29) * lisp.run, lisp.exe: Configure options for utils/xindy. (line 14) * LittleEndian architectures: Configure options for texk/web2c. (line 27) * m4/ top-level directory: Top-level directories. (line 14) * macros, for compilers: Macros for compilers. (line 6) * macros, for libraries: Macros for libraries. (line 6) * macros, for library and header flags: Macros for library and header flags. (line 6) * macros, for programs: Macros for programs. (line 6) * macros, for Windows: Macros for Windows. (line 6) * macros, general setup: General setup macros. (line 6) * MAKE: Variables for configure. (line 33) * make -t: Build system tools. (line 43) * make rules, verbose vs. silent: --enable-silent-rules. (line 6) * mf-nowin: Configure options for texk/web2c. (line 34) * mingw32: Cross configuring. (line 27) * MINGW32, Automake conditional: Macros for Windows. (line 20) * mktex.ac: kpathsea library. (line 18) * mktextfm: kpathsea library. (line 18) * modules, for libraries: Library modules. (line 6) * modules, for programs: Program modules. (line 6) * motif: Configure options for texk/xdvik. (line 9) * native cross compilation: Cross compilation. (line 10) * OBJCXX=OBJC-COMPILER: Build one package. (line 78) * one engine, building: Build one engine. (line 6) * one package, building: Build one package. (line 6) * OpenGL, required for Asymptote: asymptote. (line 6) * operating system distribution, building for: Distro builds. (line 6) * otangle: Cross problems. (line 26) * overall build process: Building. (line 6) * parallel build: Build in parallel. (line 6) * paths, for installation: Installation directories. (line 6) * PDF files, size of: --disable-largefile. (line 11) * PDFLATEX: Variables for configure. (line 41) * PERL: Variables for configure. (line 39) * perl, required by web2c, etc.: Prerequisites. (line 23) * PKG_CONFIG: Variables for configure. (line 23) * plain.tex, not in source tree: Installing. (line 8) * png library: png library. (line 6) * poppler: Configure options for system poppler. (line 6) * PostScript files, size of: --disable-largefile. (line 11) * Preining, Norbert: Distro builds. (line 54) * preloaded binaries: Configure options for texk/web2c. (line 45) * prerequisites for building: Prerequisites. (line 6) * problems with build: Build problems. (line 6) * program module, adding: Adding a new program module. (line 6) * program modules: Program modules. (line 6) * program-specific configure options: Program-specific configure options. (line 6) * proxy build system: png library. (line 36) * reautoconf: Build system tools. (line 28) * requirements for building: Prerequisites. (line 6) * runscript.exe: Macros for Windows. (line 25) * scripts, linked and not maintained: Linked scripts. (line 6) * scrolling, smooth: Configure options for texk/xdvik. (line 13) * SED: Variables for configure. (line 34) * setup macros, general: General setup macros. (line 6) * shared libraries, using vs. avoiding: Distro builds. (line 11) * size of PDF and PS files: --disable-largefile. (line 11) * size of source tree: Build one package. (line 53) * source code declarations: Declarations and definitions. (line 6) * source directory building, not supported: Building. (line 17) * source tree: Layout and infrastructure. (line 6) * squeeze: Cross problems. (line 13) * squeeze/configure.ac: xdvik package. (line 14) * static functions: Declarations and definitions. (line 35) * static linking for C++: Macros for compilers. (line 29) * stpcpy: Declarations and definitions. (line 18) * Subversion repository: Build system tools. (line 38) * support files, separate from build: Installing. (line 8) * symlinks, used for scripts: Linked scripts. (line 6) * synctex: Configure options for texk/web2c. (line 59) * synctex <1>: Configure options for texk/web2c. (line 64) * system distribution, building for: Distro builds. (line 6) * t1utils package: t1utils package. (line 6) * tangle: Cross problems. (line 26) * tests, running: Overview of build system. (line 6) * TeX-specific library module, adding: Adding a new TeX-specific library module. (line 6) * texlive.tlpdb, TeX Live database: Installing. (line 8) * tie: Cross problems. (line 26) * timestamps, in repository: Build system tools. (line 38) * tools, for building: Build system tools. (line 6) * top-level directories: Top-level directories. (line 6) * touching files to avoid rerunning: Build system tools. (line 43) * Travis-CI: Continuous integration. (line 6) * travis.yml: CI testing on Travis-CI. (line 6) * type cast from const, avoiding: Const. (line 38) * use-commit-times, Subversion: Build system tools. (line 38) * variable declarations, in source code: Declarations and definitions. (line 52) * variables for configure: Variables for configure. (line 6) * warning, discards qualifiers: Const. (line 30) * WARNING_C[XX]FLAGS: Macros for compilers. (line 9) * web2c program: Cross problems. (line 13) * web2c.ac: Configure options for texk/web2c. (line 37) * wget: Linked scripts. (line 23) * WIN32, Automake conditional: Macros for Windows. (line 16) * WIN32_WRAP, Automake conditional: Macros for Windows. (line 25) * Windows, invoking scripts on: Linked scripts. (line 6) * Windows, macros for: Macros for Windows. (line 6) * withenable.ac, for new modules: Adding a new program module. (line 14) * Work/ top-level directory: Top-level directories. (line 39) * wrapper binary for scripts on Windows: Linked scripts. (line 6) * wrapper build system: freetype library. (line 6) * X toolkit: Configure options for texk/web2c. (line 22) * X11 development, required by X clients: Prerequisites. (line 27) * X11 headers, and const: Const. (line 21) * xasy: asymptote. (line 6) * xaw: Configure options for texk/xdvik. (line 9) * xdvik: xdvik package. (line 6) * xdvik <1>: Configure options for texk/xdvik. (line 6) * xdvipdfmx: Configure options for texk/dvipdfm-x. (line 6) * xindy: Linked scripts. (line 23) * xindy <1>: xindy package. (line 6) * xindy <2>: Configure options for utils/xindy. (line 6) * xindy cross compiling requires clisp: Cross problems. (line 33) * XInput: Configure options for texk/xdvik. (line 13) * Xlib: Configure options for texk/web2c. (line 22) * xpdf as library: Configure options for system poppler. (line 6) * xz: Linked scripts. (line 23) * zlib library: zlib library. (line 6)  Tag Table: Node: Top1208 Node: Introduction2118 Node: Overview of build system3943 Node: Prerequisites5994 Node: Building8603 Node: Build iteration9989 Node: Build problems11030 Node: Build in parallel11484 Node: Build distribution12088 Node: Build one package12736 Node: Build one engine16415 Node: Cross compilation17464 Node: Cross configuring18744 Node: Cross problems20421 Node: Installing22083 Node: Installation directories23103 Node: Linked scripts24921 Node: Distro builds26412 Node: Layout and infrastructure28788 Node: Build system tools29619 Node: Top-level directories31836 Node: Autoconf macros34072 Node: General setup macros34834 Node: Macros for programs35709 Node: Macros for compilers36510 Node: Macros for libraries37918 Node: Macros for library and header flags38344 Node: Macros for Windows40255 Node: Library modules41842 Node: png library42331 Node: zlib library44679 Node: freetype library45194 Node: kpathsea library45890 Node: Program modules47269 Node: t1utils package47697 Node: xindy package48242 Node: xdvik package49356 Node: asymptote50415 Node: Extending TeX Live50911 Node: Adding a new program module51694 Node: Adding a new generic library module55033 Node: Adding a new TeX-specific library module57262 Node: Configure options57960 Node: Global configure options59341 Node: --disable-native-texlive-build59883 Node: --prefix --bindir ...60845 Node: --disable-largefile61385 Node: --disable-missing62086 Node: --enable-compiler-warnings=LEVEL62487 Node: --enable-cxx-runtime-hack63143 Node: --enable-maintainer-mode63563 Node: --enable-multiplatform64092 Node: --enable-shared64665 Node: --enable-silent-rules65036 Node: --without-ln-s65488 Node: --without-x65835 Node: Program-specific configure options66023 Node: --enable-PROG --disable-PROG66666 Node: --disable-all-pkgs66939 Node: Configure options for texk/web2c67722 Node: Configure options for texk/bibtex-x70260 Node: Configure options for texk/dvipdfm-x70803 Node: Configure options for texk/dvisvgm71579 Node: Configure options for texk/texlive72460 Node: Configure options for texk/xdvik72881 Node: Configure options for utils/xindy73502 Node: Library-specific configure options74392 Node: Configure options for kpathsea75394 Node: Configure options for system poppler76143 Node: Variables for configure76907 Node: Coding conventions78333 Node: Declarations and definitions79048 Node: Const81222 Node: Continuous integration83086 Node: Transfer from Subversion to Github83750 Node: Automatic update of the Git mirror85912 Node: CI testing on Travis-CI86494 Node: Releases on Github87203 Node: install-tl87643 Node: install-tl NAME88012 Node: install-tl SYNOPSIS88170 Node: install-tl DESCRIPTION88428 Node: install-tl REFERENCES89488 Node: install-tl OPTIONS90012 Ref: install-tl *-gui* [[=]_module_]90353 Ref: install-tl text90561 Ref: install-tl tcl90681 Ref: install-tl wizard91023 Ref: install-tl expert91156 Ref: install-tl perltk91278 Ref: install-tl *-no-gui*91824 Ref: install-tl *-lang* _llcode_91914 Ref: install-tl *-repository* _url|path_92670 Ref: install-tl *-select-repository*93558 Ref: install-tl *-all-options*93994 Ref: install-tl *-custom-bin* _path_94249 Ref: install-tl *-debug-translation*95083 Ref: install-tl *-force-platform* _platform_95302 Ref: install-tl *-help*, *--help*, *-?*95546 Ref: install-tl *-in-place*95959 Ref: install-tl *-init-from-profile* _profile_file_96504 Ref: install-tl *-logfile* _file_96773 Ref: install-tl *-no-cls*97124 Ref: install-tl *-no-persistent-downloads*97272 Ref: install-tl *-persistent-downloads*97297 Ref: install-tl *-no-verify-downloads*97915 Ref: install-tl *-non-admin*98278 Ref: install-tl *-portable*98371 Ref: install-tl *-print-platform*98510 Ref: install-tl *-profile* _profile_file_98708 Ref: install-tl *-q*98929 Ref: install-tl *-scheme* _scheme_98991 Ref: install-tl *-v*99465 Ref: install-tl *-version*, *--version*99620 Node: install-tl PROFILES99754 Ref: install-tl instopt_adjustpath (default 0 on Unix, 1 on Windows)102620 Ref: install-tl instopt_adjustrepo (default 1)102696 Ref: install-tl instopt_letter (default 0)102833 Ref: install-tl instopt_portable (default 0)102924 Ref: install-tl instopt_write18_restricted (default 1)103020 Node: install-tl ENVIRONMENT VARIABLES104359 Ref: install-tl TEXLIVE_DOWNLOADER104737 Ref: install-tl TL_DOWNLOAD_PROGRAM104760 Ref: install-tl TL_DOWNLOAD_ARGS104780 Ref: install-tl TEXLIVE_INSTALL_ENV_NOCHECK104984 Ref: install-tl TEXLIVE_INSTALL_NO_CONTEXT_CACHE105186 Ref: install-tl TEXLIVE_INSTALL_NO_IMPORT105295 Ref: install-tl TEXLIVE_INSTALL_NO_WELCOME105447 Ref: install-tl TEXLIVE_INSTALL_PREFIX105569 Ref: install-tl TEXLIVE_INSTALL_TEXDIR105595 Ref: install-tl TEXLIVE_INSTALL_TEXMFCONFIG105626 Ref: install-tl TEXLIVE_INSTALL_TEXMFVAR105654 Ref: install-tl TEXLIVE_INSTALL_TEXMFHOME105683 Ref: install-tl TEXLIVE_INSTALL_TEXMFLOCAL105713 Ref: install-tl TEXLIVE_INSTALL_TEXMFSYSCONFIG105747 Ref: install-tl TEXLIVE_INSTALL_TEXMFSYSVAR105778 Ref: install-tl NOPERLDOC106149 Node: install-tl AUTHORS AND COPYRIGHT106213 Node: tlmgr106626 Node: tlmgr NAME107111 Node: tlmgr SYNOPSIS107243 Node: tlmgr DESCRIPTION107433 Node: tlmgr EXAMPLES108532 Ref: tlmgr tlmgr option repository ctan108783 Ref: tlmgr tlmgr option repository http://mirror.ctan.org/systems/texlive/tlnet108855 Ref: tlmgr tlmgr update --list109460 Ref: tlmgr tlmgr update --all109553 Ref: tlmgr tlmgr info _what_109710 Node: tlmgr OPTIONS109972 Ref: tlmgr *--repository* _url|path_110492 Ref: tlmgr /some/local/dir111678 Ref: tlmgr file:/some/local/dir111707 Ref: tlmgr ctan111780 Ref: tlmgr http://mirror.ctan.org/systems/texlive/tlnet111833 Ref: tlmgr http://server/path/to/tlnet112174 Ref: tlmgr https://server/path/to/tlnet112555 Ref: tlmgr ftp://server/path/to/tlnet113023 Ref: tlmgr user@machine:/path/to/tlnet113155 Ref: tlmgr scp://user@machine/path/to/tlnet113196 Ref: tlmgr ssh://user@machine/path/to/tlnet113237 Ref: tlmgr *--gui* [_action_]113630 Ref: tlmgr *--gui-lang* _llcode_114443 Ref: tlmgr *--debug-translation*115179 Ref: tlmgr *--machine-readable*115382 Ref: tlmgr *--no-execute-actions*115650 Ref: tlmgr *--package-logfile* _file_115843 Ref: tlmgr *--pause*116097 Ref: tlmgr *--persistent-downloads*116252 Ref: tlmgr *--no-persistent-downloads*116280 Ref: tlmgr *--pin-file*116774 Ref: tlmgr *--usermode*116992 Ref: tlmgr *--usertree* _dir_117112 Ref: tlmgr *--verify-repo=[none|main|all]*117238 Node: tlmgr ACTIONS118137 Node: tlmgr help118998 Node: tlmgr version119475 Node: tlmgr backup119738 Ref: tlmgr *backup [_option_...] --all*119909 Ref: tlmgr *backup [_option_...] _pkg_...*119942 Ref: tlmgr *--backupdir* _directory_121008 Ref: tlmgr *--all*121225 Ref: tlmgr *--clean*[=_N_]121477 Ref: tlmgr *--dry-run*121804 Node: tlmgr candidates _pkg_121934 Node: tlmgr check [_option_...] [depends|executes|files|runfiles|texmfdbs|all]122289 Ref: tlmgr *depends*122803 Ref: tlmgr *executes*123145 Ref: tlmgr *files*123260 Ref: tlmgr *runfiles*123396 Ref: tlmgr *texmfdbs*123533 Ref: tlmgr - all items in TEXMFDBS have the !! prefix.123763 Ref: tlmgr - all items in TEXMFBDS have an ls-R file (if they exist at all).123839 Ref: tlmgr - all items in TEXMF with !! are listed in TEXMFDBS.123904 Ref: tlmgr - all items in TEXMF with an ls-R file are listed in TEXMFDBS.123979 Ref: tlmgr *--use-svn*124004 Node: tlmgr conf124145 Ref: tlmgr *conf [texmf|tlmgr|updmap [--conffile _file_] [--delete] [_key_ [_value_]]]*124433 Ref: tlmgr *conf auxtrees [--conffile _file_] [show|add|remove] [_value_]*124497 Node: tlmgr dump-tlpdb [_option_...] [--json]126912 Ref: tlmgr *--local*127345 Ref: tlmgr *--remote*127384 Ref: tlmgr *--json*127422 Node: tlmgr generate127993 Ref: tlmgr *generate [_option_...] language*128189 Ref: tlmgr *generate [_option_...] language.dat*128228 Ref: tlmgr *generate [_option_...] language.def*128267 Ref: tlmgr *generate [_option_...] language.dat.lua*128310 Ref: tlmgr *--dest* _output_file_130637 Ref: tlmgr *--localcfg* _local_conf_file_131213 Ref: tlmgr *--rebuild-sys*131336 Node: tlmgr gui132151 Node: tlmgr info132329 Ref: tlmgr *info [_option_...] _pkg_...*132491 Ref: tlmgr *info [_option_...] collections*132525 Ref: tlmgr *info [_option_...] schemes*132555 Ref: tlmgr *--list*134085 Ref: tlmgr *--only-installed*134399 Ref: tlmgr *--only-remote*134587 Ref: tlmgr *--data item1,item2,...*134891 Ref: tlmgr *--json* 1135472 Node: tlmgr init-usertree135855 Node: tlmgr install [_option_...] _pkg_...136236 Ref: tlmgr *--dry-run* 1136744 Ref: tlmgr *--file*136861 Ref: tlmgr *--force*137083 Ref: tlmgr *--no-depends*137303 Ref: tlmgr *--no-depends-at-all*137462 Ref: tlmgr *--reinstall*137862 Ref: tlmgr *--with-doc*138240 Ref: tlmgr *--with-src*138253 Node: tlmgr key138981 Ref: tlmgr *key list*139139 Ref: tlmgr *key add _file_*139157 Ref: tlmgr *key remove _keyid_*139179 Node: tlmgr list139773 Node: tlmgr option139935 Ref: tlmgr *option [--json] [show]*140090 Ref: tlmgr *option [--json] showall|help*140121 Ref: tlmgr *option _key_ [_value_]*140147 Node: tlmgr paper144725 Ref: tlmgr *paper [a4|letter]*144874 Ref: tlmgr *<[xdvi|pdftex|dvips|dvipdfmx|context|psutils] paper [_papersize_|--list]*>144950 Ref: tlmgr *paper --json*144965 Node: tlmgr path146180 Ref: tlmgr *path [--w32mode=user|admin] add*146341 Ref: tlmgr *path [--w32mode=user|admin] remove*146378 Node: tlmgr pinning147863 Ref: tlmgr pinning show148104 Ref: tlmgr pinning add _repo_ _pkgglob_...148177 Ref: tlmgr pinning remove _repo_ _pkgglob_...148296 Ref: tlmgr pinning remove _repo_ --all148449 Node: tlmgr platform148503 Ref: tlmgr *platform list|add|remove _platform_...*148689 Ref: tlmgr *platform set _platform_*148716 Ref: tlmgr *platform set auto*148737 Ref: tlmgr *--dry-run* 2149614 Node: tlmgr postaction149733 Ref: tlmgr *postaction [_option_...] install [shortcut|fileassoc|script] [_pkg_...]*149963 Ref: tlmgr *postaction [_option_...] remove [shortcut|fileassoc|script] [_pkg_...]*150037 Ref: tlmgr *--w32mode=[user|admin]*150352 Ref: tlmgr *--fileassocmode=[1|2]*150768 Ref: tlmgr *--all* 1151053 Node: tlmgr print-platform151108 Node: tlmgr print-platform-info151439 Node: tlmgr remove [_option_...] _pkg_...151739 Ref: tlmgr *--all* 2152223 Ref: tlmgr *--backup*152333 Ref: tlmgr *--backupdir* _directory_ 1152359 Ref: tlmgr *--no-depends* 1152764 Ref: tlmgr *--no-depends-at-all* 1152826 Ref: tlmgr *--force* 1152929 Ref: tlmgr *--dry-run* 3153402 Node: tlmgr repository153738 Ref: tlmgr *repository list*153926 Ref: tlmgr *repository list _path|url|tag_*153960 Ref: tlmgr *repository add _path_ [_tag_]*153993 Ref: tlmgr *repository remove _path|tag_*154025 Ref: tlmgr *repository set _path_[#_tag_] [_path_[#_tag_] ...]*154079 Ref: tlmgr *repository status*154100 Ref: tlmgr The tag (which can be the same as the url);155327 Node: tlmgr restore155805 Ref: tlmgr *restore [_option_...] _pkg_ [_rev_]*155984 Ref: tlmgr *restore [_option_...] --all*156014 Ref: tlmgr *--all* 3156714 Ref: tlmgr *--backupdir* _directory_ 2156928 Ref: tlmgr *--dry-run* 4157109 Ref: tlmgr *--force* 2157241 Ref: tlmgr *--json* 2157287 Node: tlmgr search157614 Ref: tlmgr *search [_option_...] _what_*157778 Ref: tlmgr *search [_option_...] --file _what_*157815 Ref: tlmgr *search [_option_...] --all _what_*157851 Ref: tlmgr *--file* 1158071 Ref: tlmgr *--all* 4158133 Ref: tlmgr *--global*158222 Ref: tlmgr *--word*158349 Node: tlmgr shell158664 Ref: tlmgr protocol159399 Ref: tlmgr help 1159463 Ref: tlmgr version 1159516 Ref: tlmgr quit, end, bye, byebye, EOF159584 Ref: tlmgr restart159605 Ref: tlmgr load [local|remote]159728 Ref: tlmgr save159798 Ref: tlmgr get [_var_] =item set [_var_ [_val_]]159921 Node: tlmgr show160522 Node: tlmgr uninstall160689 Node: tlmgr update [_option_...] [_pkg_...]160919 Ref: tlmgr *--all* 5161290 Ref: tlmgr *--self*163469 Ref: tlmgr *--dry-run* 5164233 Ref: tlmgr *--list* [_pkg_]164410 Ref: tlmgr *--exclude* _pkg_165099 Ref: tlmgr *--no-auto-remove* [_pkg_...]165899 Ref: tlmgr *--no-auto-install* [_pkg_...]166383 Ref: tlmgr *--reinstall-forcibly-removed*167145 Ref: tlmgr *--backup* 1167680 Ref: tlmgr *--backupdir* _directory_ 3167706 Ref: tlmgr *--no-depends* 2168872 Ref: tlmgr *--no-depends-at-all* 2169075 Ref: tlmgr *--force* 3169178 Node: tlmgr CONFIGURATION FILE FOR TLMGR170198 Ref: tlmgr auto-remove, value 0 or 1 (default 1), same as command-line option.171205 Ref: tlmgr gui-expertmode, value 0 or 1 (default 1). This switches between the full GUI and a simplified GUI with only the most common settings.171342 Ref: tlmgr gui-lang _llcode_, with a language code value as with the command-line option.171424 Ref: tlmgr no-checksums, value 0 or 1 (default 0, see below).171478 Ref: tlmgr persistent-downloads, value 0 or 1 (default 1), same as command-line option.171558 Ref: tlmgr require-verification, value 0 or 1 (default 0), same as command-line option.171638 Ref: tlmgr update-exclude, value: comma-separated list of packages (no space allowed). Same as the command line option --exclude for the action update.171786 Ref: tlmgr verify-downloads, value 0 or 1 (default 1), same as command-line option.171862 Ref: tlmgr allowed-actions _action1_ [,_action_,...] The value is a comma-separated list of tlmgr actions which are allowed to be executed when tlmgr is invoked in system mode (that is, without --usermode).172131 Node: tlmgr CRYPTOGRAPHIC VERIFICATION173219 Node: tlmgr Configuration of GnuPG invocation175392 Node: tlmgr USER MODE176030 Node: tlmgr User mode install178876 Node: tlmgr User mode backup, restore, remove, update180020 Node: tlmgr User mode generate, option, paper180462 Node: tlmgr MULTIPLE REPOSITORIES180838 Node: tlmgr Pinning182567 Node: tlmgr GUI FOR TLMGR184490 Node: tlmgr Main display186139 Node: tlmgr Display configuration area186391 Ref: tlmgr Status186752 Ref: tlmgr Category186916 Ref: tlmgr Match187102 Ref: tlmgr Selection187283 Ref: tlmgr Display configuration buttons187487 Node: tlmgr Package list area187670 Ref: tlmgr a checkbox188254 Ref: tlmgr package name188390 Ref: tlmgr local revision (and version)188489 Ref: tlmgr remote revision (and version)188864 Ref: tlmgr short description189161 Node: tlmgr Main display action buttons189206 Ref: tlmgr Update all installed189472 Ref: tlmgr Update189844 Ref: tlmgr Install189894 Ref: tlmgr Remove190080 Ref: tlmgr Backup190258 Node: tlmgr Menu bar190415 Ref: tlmgr tlmgr menu190638 Ref: tlmgr Options menu190946 Ref: tlmgr Actions menu192029 Ref: tlmgr Help menu192457 Node: tlmgr GUI options192591 Ref: tlmgr -background _color_192837 Ref: tlmgr -font " _fontname_ _fontsize_ "192902 Ref: tlmgr -foreground _color_193060 Ref: tlmgr -geometry _geomspec_193112 Ref: tlmgr -xrm _xresource_193304 Node: tlmgr MACHINE-READABLE OUTPUT193573 Node: tlmgr Machine-readable update and install output194383 Ref: tlmgr location-url _location_195659 Ref: tlmgr total-bytes _count_195875 Ref: tlmgr _pkgname_196285 Ref: tlmgr _status_196495 Ref: tlmgr d196573 Ref: tlmgr f196633 Ref: tlmgr u196812 Ref: tlmgr r196858 Ref: tlmgr a196981 Ref: tlmgr i197159 Ref: tlmgr I197278 Ref: tlmgr _localrev_197380 Ref: tlmgr _serverrev_197487 Ref: tlmgr _size_197599 Ref: tlmgr _runtime_197768 Ref: tlmgr _esttot_197838 Node: tlmgr Machine-readable option output197871 Node: tlmgr ENVIRONMENT VARIABLES198383 Ref: tlmgr TEXLIVE_COMPRESSOR198894 Ref: tlmgr TEXLIVE_DOWNLOADER199742 Ref: tlmgr TL_DOWNLOAD_PROGRAM199765 Ref: tlmgr TL_DOWNLOAD_ARGS199785 Ref: tlmgr TEXLIVE_PREFER_OWN200811 Node: tlmgr AUTHORS AND COPYRIGHT201635 Node: Index202033  End Tag Table  Local Variables: coding: utf-8 End: