This is kpathsea.info, produced by makeinfo version 6.3 from kpathsea.texi. This file documents the Kpathsea library for path searching. Copyright (C) 1996-2017 Karl Berry & Olaf Weber. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the TeX Users Group. INFO-DIR-SECTION TeX START-INFO-DIR-ENTRY * Kpathsea: (kpathsea). File lookup along search paths. * kpsewhich: (kpathsea)Invoking kpsewhich. TeX file searching. * mktexfmt: (kpathsea)mktex scripts. Format (fmt/base/mem) generation. * mktexlsr: (kpathsea)Filename database. Update ls-R. * mktexmf: (kpathsea)mktex scripts. MF source generation. * mktexpk: (kpathsea)mktex scripts. PK bitmap generation. * mktextex: (kpathsea)mktex scripts. TeX source generation. * mktextfm: (kpathsea)mktex scripts. TeX font metric generation. END-INFO-DIR-ENTRY  File: kpathsea.info, Node: Top, Next: Introduction, Up: (dir) Kpathsea library **************** This manual documents the Kpathsea library for path searching. It corresponds to version 6.2.3, released in April 2017. * Menu: * Introduction:: Overview and history. * unixtex.ftp:: Obtaining TeX software. * Security:: Who can write what files, etc. * TeX directory structure:: Managing the horde of TeX input files. * Path searching:: How filename lookups work. * TeX support:: Special support for TeX-related file lookups. * Programming:: How to use Kpathsea features in your program. * Reporting bugs:: Where and how to report bugs. * Index:: General index.  File: kpathsea.info, Node: Introduction, Next: unixtex.ftp, Prev: Top, Up: Top 1 Introduction ************** This manual corresponds to version 6.2.3 of the Kpathsea library, released in April 2017. The library's fundamental purpose is to return a filename from a list of directories specified by the user, similar to what shells do when looking up program names to execute. The following software, all of which is maintained in parallel, uses this library: * Dviljk (see the 'dvilj' man page) * Dvipsk (*note (dvips)::) * GNU font utilities (*note (fontu)::) * Web2c (*note (web2c)::) * Xdvik (see the 'xdvi' man page) Other software that we do not maintain also uses it. Kpathsea is now maintained as part of the TeX Live distribution (). For information on configuration, building, installing, and more, *note (tlbuild)::. The library is still actively maintained. If you have comments or suggestions, please send along (*note Reporting bugs::). The Kpathsea library is distributed under the GNU Library General Public License (LGPL). In short, this means if you write a program using the library, you must (offer to) distribute the source to the library, along with any changes you have made, and allow anyone to modify the library source and distribute their modifications. It does not mean you have to distribute the source to your program, although we hope you will. See accompanying files for the text of the GNU licenses, or . If you know enough about TeX to be reading this manual, then you (or your institution) should consider joining the TeX Users Group (if you're already a member, thanks!). TUG produces the periodical 'TUGboat', sponsors an annual meeting and publishes the proceedings, and arranges courses on TeX for all levels of users throughout the world. See for information. * Menu: * History::  File: kpathsea.info, Node: History, Up: Introduction 1.1 History =========== This section is for those people who are curious about how the library came about. If you like to read historical accounts of software, we urge you to seek out the GNU Autoconf manual and the "Errors of TeX" paper by Don Knuth, published in his book 'Digital Typography', among other places. [Karl writes.] My first ChangeLog entry for Web2c seems to be February 1990, but I may have done some work before then. In any case, Tim Morgan and I were jointly maintaining it for a time. (I should mention here that Tim had made Web2c into a real distribution long before I had ever used it or even heard of it, and Tom Rokicki did the original implementation. When I started, I was using 'pxp' and 'pc' on VAX 11/750's and the hot new Sun 2 machines.) It must have been later in 1990 and 1991 that I started working on 'TeX for the Impatient'. Dvips, Xdvi, Web2c, and the GNU fontutils (which I was also writing at the time) all used different environment variables, and, more importantly, had different bugs in their path searching. This became extremely painful, as I was stressing everything to the limit working on the book. I also desperately wanted to implement subdirectory searching, since I couldn't stand putting everything in one big directory, and also couldn't stand having to explicitly specify 'cm', 'pandora', ... in a path. In the first incarnation, I just hacked separately on each program--that was the original subdirectory searching code in both Xdvi and Dvips. That is, I tried to go with the flow in each program, rather than changing the program's calling sequences to conform to new routines. Then, as bugs inevitably appeared, I found I was fixing the same thing three times (Web2c and fontutils were already sharing code, since I maintained both of those--there was no Dvipsk or Xdvik or Dviljk at this point). After a while, I finally started sharing source files. They weren't yet a library, though. I just kept things up to date with shell scripts. (I was developing on a 386 running ISC 2.2 at the time, and so didn't have symbolic links. An awful experience.) The ChangeLogs for Xdvik and Dvipsk record initial releases of those distributions in May and June 1992. I think it was because I was tired of the different configuration strategies of each program, not so much because of the path searching. Autoconf was being developed by David MacKenzie and others, and I was adapting it to TeX and friends. I started to make a separate library that other programs could link with on my birthday in April 1993, according to the ChangeLog. I don't remember exactly why I finally took the time to make it a separate library; a conversation with david zuhn initiated it. Just seemed like it was time. Dviljk got started in March 1994 after I bought a Laserjet 4. (Kpathsea work got suspended while Norm Walsh and I, with Gustaf Neumann's help, implemented a way for TeX to get at all those neat builtin LJ4 fonts ... such a treat to have something to typeset in besides Palatino!) By spring of 1995, I had implemented just about all the path-searching features in Kpathsea that I plan to, driven beyond my initial goals by Thomas Esser and others. I then started to integrate Web2c with Kpathsea. After the release of a stable Web2c, I hope to be able to stop development, and turn most of my attention back to making fonts for GNU. (Always assuming Micros**t hasn't completely obliterated Unix by then, or that software patents haven't stopped software development by anybody smaller than a company with a million-dollar-a-year legal budget. Which is actually what I think is likely to happen, but that's another story...) [Olaf writes.] At the end of 1997, Unix is still alive and kicking, individuals still develop software, and Web2c development still continues. Karl had been looking for some time for someone to take up part of the burden, and I volunteered. [Karl writes again.] Indeed, time goes on. As of 2006 or so, Olaf's available time for Kpathsea became rather reduced, and I started taking overall care of it again, although I did not do any significant new development. In 2009, Taco Hoekwater made a major rearrangement to make the library suitable for use within the MetaPost library (*note Programming overview::). Also, for some years now, Peter Breitenlohner has made many improvements to the infrastructure and kept up-to-date with respect to the overall TeX Live build, where Kpathsea is now maintained.  File: kpathsea.info, Node: unixtex.ftp, Next: Security, Prev: Introduction, Up: Top 2 'unixtex.ftp': Obtaining TeX ****************************** This is , last updated 13 June 2010. Also available as . Email with comments or questions. The principal free TeX distribution for Unix-like systems is TeX Live, on the web at . The pages there describe many ways to acquire and build TeX, over the Internet or on physical media, both the sources and precompiled binaries for many systems, either standalone or as part of various operating system distributions. Web2C, Kpathsea, Dvips, and Dviljk are no longer released as a separate packages. Their sources are now maintained as part of TeX Live. The host ftp.cs.stanford.edu is the original source for the files for which Donald Knuth is directly responsible: 'tex.web', 'plain.tex', etc. However, unless you want to undertake the very significant project of building your TeX installation from scratch, it is far more reliable and less work to retrieve these files as part of a larger package In any case, the Stanford ftp site is not the canonical source for anything except what was created as part of Knuth's original TeX, so do not rely on any other files available there being up-to-date. The best place to check for up-to-date files is CTAN (the Comprehensive TeX Archive Network), .  File: kpathsea.info, Node: Security, Next: TeX directory structure, Prev: unixtex.ftp, Up: Top 3 Security ********** None of the programs in the TeX system require any special system privileges, so there's no first-level security concern of people gaining illegitimate root access. A TeX document, however, can write to arbitrary files, e.g., '~/.rhosts', and thus an unwitting user who runs TeX on a random document is vulnerable to a trojan horse attack. This loophole is closed by default, but you can be permissive if you so desire in 'texmf.cnf'. *Note (web2c)tex invocation::. MetaPost has the same issue. Dvips, Xdvi, and TeX can also execute shell commands under some circumstances. To disable this, see the '-R' option in *note (dvips)Option details::, the xdvi man page, and *note (web2c)tex invocation::, respectively. Another security issue arises because it's very useful--almost necessary--to make arbitrary fonts on user demand with 'mktexpk' and friends. Where do these files get installed? By default, the 'mktexpk' distributed with Kpathsea assumes a world-writable '/var/tmp' directory; this is a simple and convenient approach, but it may not suit your situation because it means that a local cache of fonts is created on every machine. To avoid this duplication, many people consider a shared, globally writable font tree desirable, in spite of the potential security problems. To do this you should change the value of 'VARTEXFONTS' in 'texmf.cnf' to refer to some globally known directory. *Note mktex configuration::. The first restriction you can apply is to make newly-created directories under 'texmf' be append-only with an option in 'mktex.cnf'. *Note mktex configuration::. Another approach is to establish a group (or user) for TeX files, make the 'texmf' tree writable only to that group (or user), and make 'mktexpk' et al. setgid to that group (or setuid to that user). Then users must invoke the scripts to install things. (If you're worried about the inevitable security holes in scripts, then you could write a C wrapper to exec the script.) The 'mktex...' scripts install files with the same read and write permissions as the directory they are installed in. The executable, sgid, suid, and sticky bits are always cleared. Any directories created by the 'mktex...' scripts have the same permissions as their parent directory, unless the 'appendonlydir' feature is used, in which case the sticky bit is always set.  File: kpathsea.info, Node: TeX directory structure, Next: Path searching, Prev: Security, Up: Top 4 TeX directory structure ************************* This section describes the default installation hierarchy of the distribution. It conforms to both the GNU coding standards and the TeX directory structure (TDS) standard. For rationale and further explanation, please see those documents. The GNU document is available from . The TDS document is available from (*note unixtex.ftp::). In short, here is a skeleton of the default directory structure, extracted from the TDS document: PREFIX/ installation root ('/usr/local' by default) bin/ executables man/ man pages include/ C header files info/ GNU info files lib/ libraries ('libkpathsea.*') share/ architecture-independent files texmf/ TDS root bibtex/ BibTeX input files bib/ BibTeX databases base/ base distribution (e.g., 'xampl.bib') misc/ single-file databases PKG/ name of a package bst/ BibTeX style files base/ base distribution (e.g., 'plain.bst', 'acm.bst') misc/ single-file styles PKG/ name of a package doc/ additional documentation dvips/ '.pro', '.ps', 'psfonts.map' fonts/ font-related files TYPE/ file type (e.g., 'tfm', 'pk') MODE/ type of output device (types 'pk' and 'gf' only) SUPPLIER/ name of a font supplier (e.g., 'public') TYPEFACE/ name of a typeface (e.g., 'cm') dpiNNN/ font resolution (types 'pk' and 'gf' only) metafont/ Metafont (non-font) input files base/ base distribution (e.g., 'plain.mf') misc/ single-file packages (e.g., 'modes.mf') PKG/ name of a package (e.g., 'mfpic') metapost/ MetaPost input files base/ base distribution (e.g., 'plain.mp') misc/ single-file packages PKG/ name of a package support/ support files for MetaPost-related utilities (e.g., 'trfonts.map') mft/ 'MFT' inputs (e.g., 'plain.mft') tex/ TeX input files FORMAT/ name of a format (e.g., 'plain') base/ base distribution for FORMAT (e.g., 'plain.tex') misc/ single-file packages (e.g., 'webmac.tex') local/ local additions to or local configuration files for FORMAT PKG/ name of a package (e.g., 'graphics', 'mfnfss') generic/ format-independent packages hyphen/ hyphenation patterns (e.g., 'hyphen.tex') images/ image input files (e.g., Encapsulated PostScript) misc/ single-file format-independent packages (e.g., 'null.tex'). PKG/ name of a package (e.g., 'babel') web2c/ implementation-dependent files ('.pool', '.fmt', 'texmf.cnf', etc.) Some concrete examples for most file types: /usr/local/bin/tex /usr/local/man/man1/xdvi.1 /usr/local/info/kpathsea.info /usr/local/lib/libkpathsea.a /usr/local/share/texmf/bibtex/bst/base/plain.bst /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmr10.600pk /usr/local/share/texmf/fonts/source/public/pandora/pnr10.mf /usr/local/share/texmf/fonts/tfm/public/cm/cmr10.tfm /usr/local/share/texmf/fonts/type1/adobe/utopia/putr.pfa /usr/local/share/texmf/metafont/base/plain.mf /usr/local/share/texmf/metapost/base/plain.mp /usr/local/share/texmf/tex/plain/base/plain.tex /usr/local/share/texmf/tex/generic/hyphen/hyphen.tex /usr/local/share/texmf/web2c/tex.pool /usr/local/share/texmf/web2c/tex.fmt /usr/local/share/texmf/web2c/texmf.cnf  File: kpathsea.info, Node: Path searching, Next: TeX support, Prev: TeX directory structure, Up: Top 5 Path searching **************** This chapter describes the generic path searching mechanism Kpathsea provides. For information about searching for particular file types (e.g., TeX fonts), see the next chapter. * Menu: * Searching overview:: Basic scheme for searching. * Path sources:: Where search paths can be defined. * Path expansion:: Special constructs in search paths. * Filename database:: Using an externally-built list to search. * Invoking kpsewhich:: Standalone path lookup.  File: kpathsea.info, Node: Searching overview, Next: Path sources, Up: Path searching 5.1 Searching overview ====================== A "search path" is a colon-separated list of "path elements", which are directory names with a few extra frills. A search path can come from (a combination of) many sources; see below. To look up a file 'foo' along a path '.:/dir', Kpathsea checks each element of the path in turn: first './foo', then '/dir/foo', returning the first match (or possibly all matches). The "colon" and "slash" mentioned here aren't necessarily ':' and '/' on non-Unix systems. Kpathsea tries to adapt to other operating systems' conventions. To check a particular path element E, Kpathsea first sees if a prebuilt database (*note Filename database::) applies to E, i.e., if the database is in a directory that is a prefix of E. If so, the path specification is matched against the contents of the database. If the database does not exist, or does not apply to this path element, or contains no matches, the filesystem is searched (if this was not forbidden by the specification with '!!' and if the file being searched for must exist). Kpathsea constructs the list of directories that correspond to this path element, and then checks in each for the file being searched for. (To help speed future lookups of files in the same directory, the directory in which a file is found is floated to the top of the directory list.) The "file must exist" condition comes into play with VF files and input files read by the TeX '\openin' command. These files might very well not exist (consider 'cmr10.vf'), and so it would be wrong to search the disk for them. Therefore, if you fail to update 'ls-R' when you install a new VF file, it will not be found. Each path element is checked in turn: first the database, then the disk. If a match is found, the search stops and the result is returned. This avoids possibly-expensive processing of path specifications that are never needed on a particular run. (Unless the search explicitly requested all matches.) Although the simplest and most common path element is a directory name, Kpathsea supports additional features in search paths: layered default values, environment variable names, config file values, users' home directories, and recursive subdirectory searching. Thus, we say that Kpathsea "expands" a path element, meaning transforming all the magic specifications into the basic directory name or names. This process is described in the sections below. It happens in the same order as the sections. Exception to all of the above: If the filename being searched for is absolute or explicitly relative, i.e., starts with '/' or './' or '../', Kpathsea simply checks if that file exists. Ordinarily, if Kpathsea tries to access a file or directory that cannot be read, it gives a warning. This is so you will be alerted to directories or files that accidentally lack any read permission (for example, a 'lost+found' directory). If you prefer not to see these warnings, include the value 'readable' in the 'TEX_HUSH' environment variable or config file value. This generic path searching algorithm is implemented in 'kpathsea/pathsearch.c'. It is employed by a higher-level algorithm when searching for a file of a particular type (*note File lookup::, and *note Glyph lookup::).  File: kpathsea.info, Node: Path sources, Next: Path expansion, Prev: Searching overview, Up: Path searching 5.2 Path sources ================ A search path can come from many sources. In the order in which Kpathsea uses them: 1. A user-set environment variable, e.g., 'TEXINPUTS'. Environment variables with an underscore and the program name appended override; for example, 'TEXINPUTS_latex' overrides 'TEXINPUTS' if the program being run is named 'latex'. 2. A program-specific configuration file, e.g., an 'S /a:/b' line in Dvips' 'config.ps' (*note (dvips)Config files::). 3. A line in a Kpathsea configuration file 'texmf.cnf', e.g., 'TEXINPUTS=/c:/d' (see below). 4. The compile-time default (specified in 'kpathsea/paths.h'). You can see each of these values for a given search path by using the debugging options (*note Debugging::). These sources may be combined via default expansion (*note Default expansion::). * Menu: * Config files:: Kpathsea's runtime config files (texmf.cnf).  File: kpathsea.info, Node: Config files, Up: Path sources 5.2.1 Config files ------------------ As mentioned above, Kpathsea reads "runtime configuration files" named 'texmf.cnf' for search path and other definitions. The search path used to look for these configuration files is named 'TEXMFCNF', and is constructed in the usual way, as described above, except that configuration files cannot be used to define the path, naturally; also, an 'ls-R' database is not used to search for them. Kpathsea reads _all_ 'texmf.cnf' files in the search path, not just the first one found; definitions in earlier files override those in later files. Thus, if the search path is '.:$TEXMF', values from './texmf.cnf' override those from '$TEXMF/texmf.cnf'. If Kpathsea cannot find any 'texmf.cnf' file, it reports a warning including all the directories it checked. If you don't want to see this warning, set the environment variable 'KPATHSEA_WARNING' to the single character '0' (zero, not oh). While (or instead of) reading this description, you may find it helpful to look at the distributed 'texmf.cnf', which uses or at least mentions most features. The format of 'texmf.cnf' files follows: * Comments start with '%', either at the beginning of a line or preceded by whitespace, and continue to the end of the line. That is, as with most shells, a '%' in the "middle" of a value does not start a comment. Examples: % this is a comment var = a%b % but the value of var will be "a%b". * Blank lines are ignored. * A '\' at the end of a line acts as a continuation character, i.e., the next line is appended. Whitespace at the beginning of continuation lines is not ignored. * Each remaining line must look like VARIABLE [. PROGNAME] [=] VALUE where the '=' and surrounding whitespace is optional. * The VARIABLE name may contain any character other than whitespace, '=', or '.', but sticking to 'A-Za-z_' is safest. * If '.PROGNAME' is present, the definition only applies if the program that is running is named (i.e., the last component of 'argv[0]' is) PROGNAME or 'PROGNAME.{exe,bat,cmd,...}'. Most notably, this allows different flavors of TeX to have different search paths. * VALUE may contain any characters except '%' and '@'. (These restrictions are only necessary because of the processing done on 'texmf.cnf' at build time, so you can stick those characters in after installation if you have to.) The '$VAR.PROG' feature is not available on the right-hand side; instead, you must use an additional variable (see below for example). A ';' in VALUE is translated to ':' if running under Unix; this is useful to write a single 'texmf.cnf' which can be used under both Unix and Windows. * All definitions are read before anything is expanded, so you can use variables before they are defined (like Make, unlike most other programs). Here is a configuration file fragment illustrating most of these points: % TeX input files -- i.e., anything to be found by \input or \openin ... latex209_inputs = .:$TEXMF/tex/latex209//:$TEXMF/tex// latex2e_inputs = .:$TEXMF/tex/latex//:$TEXMF/tex// TEXINPUTS = .:$TEXMF/tex// TEXINPUTS.latex209 = $latex209_inputs TEXINPUTS.latex2e = $latex2e_inputs TEXINPUTS.latex = $latex2e_inputs This format has obvious similarities to Bourne shell scripts--change the comment character to '#', disallow spaces around the '=', and get rid of the '.NAME' convention, and it could be run through the shell. However, there seemed little advantage in this, since all the information would have to passed back to Kpathsea and parsed there anyway, since the 'sh' process couldn't affect its parent's environment. The implementation of all this is in 'kpathsea/cnf.c'.  File: kpathsea.info, Node: Path expansion, Next: Filename database, Prev: Path sources, Up: Path searching 5.3 Path expansion ================== Kpathsea recognizes certain special characters and constructions in search paths, similar to that in shells. As a general example: '~$USER/{foo,bar}//baz' expands to all subdirectories under directories 'foo' and 'bar' in $USER's home directory that contain a directory or file 'baz'. These expansions are explained in the sections below. * Menu: * Default expansion:: a: or :a or a::b expands to a default. * Variable expansion:: $foo and ${foo} expand to environment values. * Tilde expansion:: ~ and ~user expand to home directories. * Brace expansion:: a{foo,bar}b expands to afoob abarb. * KPSE_DOT expansion:: . is replaced with $KPSE_DOT if it is defined. * Subdirectory expansion:: a// and a//b recursively expand to subdirs.  File: kpathsea.info, Node: Default expansion, Next: Variable expansion, Up: Path expansion 5.3.1 Default expansion ----------------------- If the highest-priority search path (*note Path sources::) contains an "extra colon" (i.e., leading, trailing, or doubled), Kpathsea inserts at that point the next-highest-priority search path that is defined. If that inserted path has an extra colon, the same happens with the next-highest. (An extra colon in the compile-time default value has unpredictable results, so installers beware.) For example, given an environment variable setting setenv TEXINPUTS /home/karl: and a 'TEXINPUTS' value from 'texmf.cnf' of .:$TEXMF//tex then the final value used for searching will be: /home/karl:.:$TEXMF//tex Put another way, default expansion works on "formats" (search paths), and not directly on environment variables. Example, showing the trailing ':' ignored in the first case and expanded in the second: $ env TTFONTS=/tmp: kpsewhich --expand-path '$TTFONTS' /tmp $ env TTFONTS=/tmp: kpsewhich --show-path=.ttf /tmp:.:/home/olaf/texmf/fonts/truetype//:... Since Kpathsea looks for multiple configuration files, it would be natural to expect that (for example) an extra colon in './texmf.cnf' would expand to the path in '$TEXMF/texmf.cnf'. Or, with Dvips' configuration files, that an extra colon in 'config.$PRINTER' would expand to the path in 'config.ps'. This doesn't happen. It's not clear this would be desirable in all cases, and trying to devise a way to specify the path to which the extra colon should expand seemed truly baroque. Technicality: Since it would be useless to insert the default value in more than one place, Kpathsea changes only one extra ':' and leaves any others in place (they will eventually be ignored). Kpathsea checks first for a leading ':', then a trailing ':', then a doubled ':'. You can trace this by debugging "paths" (*note Debugging::). Default expansion is implemented in the source file 'kpathsea/kdefault.c'.  File: kpathsea.info, Node: Variable expansion, Next: Tilde expansion, Prev: Default expansion, Up: Path expansion 5.3.2 Variable expansion ------------------------ '$foo' or '${foo}' in a path element is replaced by (1) the value of an environment variable 'foo' (if defined); (2) the value of 'foo' from 'texmf.cnf' (if defined); (3) the empty string. If the character after the '$' is alphanumeric or '_', the variable name consists of all consecutive such characters. If the character after the '$' is a '{', the variable name consists of everything up to the next '}' (braces may not be nested around variable names). Otherwise, Kpathsea gives a warning and ignores the '$' and its following character. You must quote the $'s and braces as necessary for your shell. _Shell_ variable values cannot be seen by Kpathsea, i.e., ones defined by 'set' in C shells and without 'export' in Bourne shells. For example, given setenv tex /home/texmf setenv TEXINPUTS .:$tex:${tex}prev the final 'TEXINPUTS' path is the three directories: .:/home/texmf:/home/texmfprev The '.PROGNAME' suffix on variables and '_PROGNAME' on environment variable names are not implemented for general variable expansions. These are only recognized when search paths are initialized (*note Path sources::). Variable expansion is implemented in the source file 'kpathsea/variable.c'.  File: kpathsea.info, Node: Tilde expansion, Next: Brace expansion, Prev: Variable expansion, Up: Path expansion 5.3.3 Tilde expansion --------------------- A leading '~' in a path element is replaced by the value of the environment variable 'HOME', or '.' if 'HOME' is not set. On Windows, the environment variable 'USERPROFILE' is checked instead of 'HOME'. A leading '~USER' in a path element is replaced by USER's home directory from the system 'passwd' database. For example, setenv TEXINPUTS ~/mymacros: will prepend a directory 'mymacros' in your home directory to the default path. As a special case, if a home directory ends in '/', the trailing slash is dropped, to avoid inadvertently creating a '//' construct in the path. For example, if the home directory of the user 'root' is '/', the path element '~root/mymacros' expands to just '/mymacros', not '//mymacros'. Tilde expansion is implemented in the source file 'kpathsea/tilde.c'.  File: kpathsea.info, Node: Brace expansion, Next: KPSE_DOT expansion, Prev: Tilde expansion, Up: Path expansion 5.3.4 Brace expansion --------------------- 'x{A,B}y' expands to 'xAy:xBy'. For example: foo/{1,2}/baz expands to 'foo/1/baz:foo/2/baz'. ':' is the path separator on the current system; e.g., on a DOS system, it's ';'. Braces can be nested; for example, 'x{A,B{1,2}}y' expands to 'xAy:xB1y:xB2y'. Multiple non-nested braces are expanded from right to left; for example, 'x{A,B}{1,2}y' expands to 'x{A,B}1y:x{A,B}2y', which expands to 'xA1y:xB1y:xA2y:xB2y'. This feature can be used to implement multiple TeX hierarchies, by assigning a brace list to '$TEXMF', as mentioned in 'texmf.in'. You can also use the path separator instead of the comma. The last example could have been written 'x{A:B}{1:2}y'. Brace expansion is implemented in the source file 'kpathsea/expand.c'.  File: kpathsea.info, Node: KPSE_DOT expansion, Next: Subdirectory expansion, Prev: Brace expansion, Up: Path expansion 5.3.5 'KPSE_DOT' expansion -------------------------- When 'KPSE_DOT' is defined in the environment, it names a directory that should be considered the current directory for the purpose of looking up files in the search paths. This feature is needed by the 'mktex...' scripts *note mktex scripts::, because these change the working directory. You should not ever define it yourself.  File: kpathsea.info, Node: Subdirectory expansion, Prev: KPSE_DOT expansion, Up: Path expansion 5.3.6 Subdirectory expansion ---------------------------- Two or more consecutive slashes in a path element following a directory D is replaced by all subdirectories of D: first those subdirectories directly under D, then the subsubdirectories under those, and so on. At each level, the order in which the directories are searched is unspecified. (It's "directory order", and definitely not alphabetical.) If you specify any filename components after the '//', only subdirectories which match those components are included. For example, '/a//b' would expand into directories '/a/1/b', '/a/2/b', '/a/1/1/b', and so on, but not '/a/b/c' or '/a/1'. You can include multiple '//' constructs in the path. '//' at the beginning of a path is ignored; you didn't really want to search every directory on the system, did you? I should mention one related implementation trick, which I took from GNU find. Matthew Farwell suggested it, and David MacKenzie implemented it. The trick is that in every real Unix implementation (as opposed to the POSIX specification), a directory which contains no subdirectories will have exactly two links (namely, one for '.' and one for '..'). That is to say, the 'st_nlink' field in the 'stat' structure will be two. Thus, we don't have to stat everything in the bottom-level (leaf) directories--we can just check 'st_nlink', notice it's two, and do no more work. But if you have a directory that contains a single subdirectory and 500 regular files, 'st_nlink' will be 3, and Kpathsea has to stat every one of those 501 entries. Therein lies slowness. You can disable the trick by undefining 'ST_NLINK_TRICK' in 'kpathsea/config.h'. (It is undefined by default except under Unix.) Unfortunately, in some cases files in leaf directories are 'stat''d: if the path specification is, say, '$TEXMF/fonts//pk//', then files in a subdirectory '.../pk', even if it is a leaf, are checked. The reason cannot be explained without reference to the implementation, so read 'kpathsea/elt-dirs.c' (search for 'may descend') if you are curious. And if you can find a way to _solve_ the problem, please let me know. Subdirectory expansion is implemented in the source file 'kpathsea/elt-dirs.c'.  File: kpathsea.info, Node: Filename database, Next: Invoking kpsewhich, Prev: Path expansion, Up: Path searching 5.4 Filename database ('ls-R') ============================== Kpathsea goes to some lengths to minimize disk accesses for searches (*note Subdirectory expansion::). Nevertheless, in practice searching each possible directory in typical TeX installations takes an excessively long time. Therefore, Kpathsea can use an externally-built "filename database" file named 'ls-R' that maps files to directories, thus avoiding the need to exhaustively search the disk. A second database file 'aliases' allows you to give additional names to the files listed in 'ls-R'. This can be helpful to adapt to "8.3" filename conventions in source files. The 'ls-R' and 'aliases' features are implemented in the source file 'kpathsea/db.c'. * Menu: * ls-R:: The main filename database. * Filename aliases:: Aliases for those names. * Database format:: Syntax details of the database file.  File: kpathsea.info, Node: ls-R, Next: Filename aliases, Up: Filename database 5.4.1 'ls-R' ------------ As mentioned above, you must name the main filename database 'ls-R'. You can put one at the root of each TeX installation hierarchy you wish to search ('$TEXMF' by default); most sites have only one hierarchy. Kpathsea looks for 'ls-R' files along the 'TEXMFDBS' path, so that should presumably match the list of hierarchies. The recommended way to create and maintain 'ls-R' is to run the 'mktexlsr' script, which is installed in '$(bindir)' ('/usr/local/bin' by default). That script goes to some trouble to follow symbolic links as necessary, etc. It's also invoked by the distributed 'mktex...' scripts. At its simplest, though, you can build 'ls-R' with the command cd /YOUR/TEXMF/ROOT && ls -LAR ./ >ls-R presuming your 'ls' produces the right output format (see the section below). GNU 'ls', for example, outputs in this format. Also presuming your 'ls' hasn't been aliased in a system file (e.g., '/etc/profile') to something problematic, e.g., 'ls --color=tty'. In that case, you will have to disable the alias before generating 'ls-R'. For the precise definition of the file format, see *note Database format::. Regardless of whether you use the supplied script or your own, you will almost certainly want to invoke it via 'cron', so when you make changes in the installed files (say if you install a new LaTeX package), 'ls-R' will be automatically updated. The '-A' option to 'ls' includes files beginning with '.' (except for '.' and '..'), such as the file '.tex' included with the LaTeX tools package. (On the other hand, _directories_ whose names begin with '.' are always ignored.) If your system does not support symbolic links, omit the '-L'. 'ls -LAR /YOUR/TEXMF/ROOT' will also work. But using './' avoids embedding absolute pathnames, so the hierarchy can be easily transported. It also avoids possible trouble with automounters or other network filesystem conventions. Kpathsea warns you if it finds an 'ls-R' file, but the file does not contain any usable entries. The usual culprit is running plain 'ls -R' instead of 'ls -LR ./' or 'ls -R /YOUR/TEXMF/ROOT'. Another possibility is some system directory name starting with a '.' (perhaps if you are using AFS); Kpathsea ignores everything under such directories. Because the database may be out-of-date for a particular run, if a file is not found in the database, by default Kpathsea goes ahead and searches the disk. If a particular path element begins with '!!', however, _only_ the database will be searched for that element, never the disk. If the database does not exist, nothing will be searched. Because this can surprise users ("I see the font 'foo.tfm' when I do an 'ls'; why can't Dvips find it?"), it is not in any of the default search paths.  File: kpathsea.info, Node: Filename aliases, Next: Database format, Prev: ls-R, Up: Filename database 5.4.2 Filename aliases ---------------------- In some circumstances, you may wish to find a file under several names. For example, suppose a TeX document was created using a DOS system and tries to read 'longtabl.sty'. But now it's being run on a Unix system, and the file has its original name, 'longtable.sty'. The file won't be found. You need to give the actual file 'longtable.sty' an alias 'longtabl.sty'. You can handle this by creating a file 'aliases' as a companion to the 'ls-R' for the hierarchy containing the file in question. (You must have an 'ls-R' for the alias feature to work.) The format of 'aliases' is simple: two whitespace-separated words per line; the first is the real name 'longtable.sty', and second is the alias ('longtabl.sty'). These must be base filenames, with no directory components. 'longtable.sty' must be in the sibling 'ls-R'. Also, blank lines and lines starting with '%' or '#' are ignored in 'aliases', to allow for comments. If a real file 'longtabl.sty' exists, it is used regardless of any aliases.  File: kpathsea.info, Node: Database format, Prev: Filename aliases, Up: Filename database 5.4.3 Database format --------------------- The "database" read by Kpathsea is a line-oriented file of plain text. The format is that generated by GNU (and most other) 'ls' programs given the '-R' option, as follows. * Blank lines are ignored. * If a line begins with '/' or './' or '../' and ends with a colon, it's the name of a directory. ('../' lines aren't useful, however, and should not be generated.) * All other lines define entries in the most recently seen directory. /'s in such lines will produce possibly-strange results. * Files with no preceding directory line are ignored. For example, here's the first few lines of 'ls-R' (which totals about 30K bytes) on my system: bibtex dvips fonts ls-R metafont metapost tex web2c ./bibtex: bib bst doc ./bibtex/bib: asi.bib btxdoc.bib ...  File: kpathsea.info, Node: Invoking kpsewhich, Prev: Filename database, Up: Path searching 5.5 'kpsewhich': Standalone path searching ========================================== The Kpsewhich program exercises the path searching functionality independent of any particular application. This can also be useful as a sort of 'find' program to locate files in your TeX hierarchies, perhaps in administrative scripts. It is used heavily in the distributed 'mktex...' scripts. Synopsis: kpsewhich OPTION... FILENAME... The options and filename(s) to look up can be intermixed. Options can start with either '-' or '--', and any unambiguous abbreviation is accepted. * Menu: * Path searching options:: Changing the mode, resolution, etc. * Specially-recognized files:: Default formats for texmf.cnf, etc. * Auxiliary tasks:: Path and variable expansion, etc. * Standard options:: '--help' and '--version'.  File: kpathsea.info, Node: Path searching options, Next: Specially-recognized files, Up: Invoking kpsewhich 5.5.1 Path searching options ---------------------------- Kpsewhich looks up each non-option argument on the command line as a filename, and returns the first file found. Various options alter the path searching behavior: '--all' Report all matches found, one per line. By default, if there is more than one match, just one will be reported (chosen effectively at random). '--dpi=NUM' Set the resolution to NUM; this only affects 'gf' and 'pk' lookups. '-D' is a synonym, for compatibility with Dvips. Default is 600. '--engine=NAME' Set the engine name to NAME. By default it is not set. The engine name is used in some search paths to allow files with the same name but used by different engines to coexist. In particular, since the memory dump files ('.fmt'/'.base'/'.mem') are now stored in subdirectories named for the engine ('tex', 'pdftex', 'xetex', etc.), you must specify an engine name in order to find them. For example, 'cont-en.fmt' typically exists for both 'pdftex' and 'xetex'. With the default path settings, you can use '--engine=/' to look for any dump file, regardless of engine; if a dump file exists for more than one engine, it's indeterminate which one is returned. (The '/' ends up specifying a normal recursive search along the path where the dumps are stored, namely '$TEXMF/web2c{/$engine,}'.) '--format=NAME' Set the format for lookup to NAME. By default, the format is guessed from the filename, with 'tex' being used if nothing else fits. The recognized filename extensions (including any leading '.') are also allowable NAMEs. All formats also have a name, which is the only way to specify formats with no associated suffix. For example, for Dvips configuration files you can use '--format="dvips config"'. (The quotes are for the sake of the shell.) Here's the current list of recognized names and the associated suffixes. *Note Supported file formats::, for more information on each of these. The strings in parentheses are abbreviations recognized only by 'kpsewhich' (not the underlying library calls). They are provided when it would otherwise require an argument containing a space to specify the format, to simplify quoting of calls from shells. gf: gf pk: pk bitmap font (bitmapfont): tfm: .tfm afm: .afm base: .base bib: .bib bst: .bst cnf: .cnf ls-R: ls-R ls-r fmt: .fmt map: .map mem: .mem mf: .mf mfpool: .pool mft: .mft mp: .mp mppool: .pool MetaPost support (mpsupport): ocp: .ocp ofm: .ofm .tfm opl: .opl .pl otp: .otp ovf: .ovf .vf ovp: .ovp .vpl graphic/figure: .eps .epsi tex: .tex .sty .cls .fd .aux .bbl .def .clo .ldf TeX system documentation (doc): texpool: .pool TeX system sources (source): .dtx .ins PostScript header: .pro Troff fonts (trofffont): type1 fonts: .pfa .pfb vf: .vf dvips config (dvipsconfig): ist: .ist truetype fonts: .ttf .ttc .TTF .TTC .dfont type42 fonts: .t42 .T42 web2c files (web2c): other text files (othertext): other binary files (otherbin): misc fonts (miscfont): web: .web .ch cweb: .w .web .ch enc files: .enc cmap files (cmap): subfont definition files: .sfd opentype fonts: .otf pdftex config (pdftexconfig): lig files: .lig texmfscripts: lua: .lua .luatex .luc .luctex .texlua .texluc .tlu font feature files: .fea cid maps: .cid .cidmap mlbib: .mlbib .bib mlbst: .mlbst .bst clua: .dll .so ris: .ris bltxml: .bltxml This option and '--path' are mutually exclusive. '--interactive' After processing the command line, read additional filenames to look up from standard input. '--mktex=FILETYPE' '--no-mktex=FILETYPE' Turn on or off the 'mktex' script associated with FILETYPE. Usual values for FILETYPE are 'pk', 'mf', 'tex', and 'tfm'. By default, all are off in Kpsewhich, even if they are enabled for TeX. This option implies setting '--must-exist'. *Note mktex scripts::. '--mode=STRING' Set the mode name to STRING; this also only affects 'gf' and 'pk' lookups. No default: any mode will be found. *Note mktex script arguments::. '--must-exist' Do everything possible to find the files, notably including searching the disk and running the 'mktex' scripts. By default, only the 'ls-R' database is checked, in the interest of efficiency. '--path=STRING' Search along the path STRING (colon-separated as usual), instead of guessing the search path from the filename. '//' and all the usual expansions are supported (*note Path expansion::). This option and '--format' are mutually exclusive. To output the complete directory expansion of a path, instead of doing a one-shot lookup, see '--expand-path' and '--show-path' in the following section. '--progname=NAME' Set the program name to NAME; default is 'kpsewhich'. This can affect the search paths via the '.PROGNAM' feature in configuration files (*note Config files::). '--subdir=STRING' Report only those matches whose directory part _ends_ with STRING (compared literally, except case is ignored on a case-insensitive operating system). For example, suppose there are two matches for a given name: kpsewhich foo.sty => /some/where/foo.sty /another/place/foo.sty Then we can narrow the result to what we are interested in with '--subdir': kpsewhich --subdir=where foo.sty => /some/where/foo.sty kpsewhich --subdir=place foo.sty => /another/place/foo.sty The string to match must be at the end of the directory part of the match, and it is taken literally, with no pattern matching: kpsewhich --subdir=another foo.sty => The string to match may cross directory components: kpsewhich --subdir=some/where foo.sty => /some/where/foo.sty '--subdir' implies '--all'; if there is more than one match, they will all be reported (in our example, both 'where' and 'place' end in 'e'): kpsewhich --subdir=e => /some/where/foo.sty /another/place/foo.sty Because of the above rules, the presence of a leading '/' is important, since it "anchors" the match to a full component name: kpsewhich --subdir=/lace foo.sty => However, a trailing '/' is immaterial (and ignored), since the match always takes place at the end of the directory part: kpsewhich --subdir=lace/ foo.sty => /another/place/foo.sty The purpose of these rules is to make it convenient to find results only within a particular area of the tree. For instance, a given script named 'foo.lua' might exist within both 'texmf-dist/scripts/pkg1/' and 'texmf-dist/scripts/pkg2/'. By specifying, say, '--subdir=/pkg1', you can be sure of getting the one you are interested in. We only match at the end because a site might happen to install TeX in '/some/coincidental/pkg1/path/', and we wouldn't want to match 'texmf-dist/scripts/pkg2/' that when searching for '/pkg1'.  File: kpathsea.info, Node: Specially-recognized files, Next: Auxiliary tasks, Prev: Path searching options, Up: Invoking kpsewhich 5.5.2 Specially-recognized files for 'kpsewhich' ------------------------------------------------ 'kpsewhich' recognizes a few special filenames on the command line and defaults to using the 'known' file formats for them, merely to save the time and trouble of specifying the format. This is only a feature of 'kpsewhich'; when using the Kpathsea library itself, none of these special filenames are recognized, and it's still up to the caller to specify the desired format. Here is the list of special filenames to 'kpsewhich', along with their corresponding format: 'config.ps' 'dvips config' 'dvipdfmx.cfg' 'other text files' 'fmtutil.cnf' 'web2c files' 'glyphlist.txt' 'map' 'mktex.cnf' 'web2c files' 'pdfglyphlist.txt' 'map' 'pdftex.cfg' 'pdftex config' (although 'pdftex.cfg' is not used any more; look for the file 'pdftexconfig.tex' instead.) 'texmf.cnf' 'cnf' 'XDvi' 'other text files' A user-specified format will override the above defaults. Another useful configuration file in this regard is 'tcfmgr.map', found in 'texmf/texconfig/tcfmgr.map', which records various information about the above configuration files (among others).  File: kpathsea.info, Node: Auxiliary tasks, Next: Standard options, Prev: Specially-recognized files, Up: Invoking kpsewhich 5.5.3 Auxiliary tasks --------------------- Kpsewhich provides some features in addition to path lookup as such: '--debug=NUM' Set debugging options to NUM. *Note Debugging::. '--expand-braces=STRING' Output variable and brace expansion of STRING. *Note Path expansion::. '--expand-path=STRING' Output the complete expansion of STRING, with each element separated by the usual path separator on the current system (';' on Windows, ':' otherwise). This may be useful to construct a custom search path for a format not otherwise supported. To retrieve the search path for a format that is already supported, see '--show-path'. Nonexistent directories are culled from the output: $ kpsewhich --expand-path '/tmp' => /tmp $ kpsewhich --expand-path '/nonesuch' => For one-shot uses of an arbitrary (not built in to Kpathsea) path, see '--path' (*note Path searching options::) '--expand-var=STRING' Output the variable and tilde expansion of STRING the 'mktex...' scripts run 'kpsewhich --expand-var='$TEXMF'' to find the root of the TeX system hierarchy. *Note Path expansion::. '--help-formats' Output information about each supported format (*note Supported file formats::), including the names and abbreviations, variables looked for, and the original path. '--safe-in-name=NAME' '--safe-out-name=NAME' Exit successfully if NAME is safe to open for reading or writing, respectively, else unsuccessfully. No output is written. These tests take account of the related Kpathsea configuration settings (*note Calling sequence::). '--show-path=NAME' Show the path that would be used for file lookups of file type NAME. Either a filename extension ('pk', '.vf', etc.) or an integer can be used, just as with '--format', described in the previous section. '--var-value=VARIABLE' Outputs the value of VARIABLE (a simple identifier like 'TEXMF', with no '$' or other constructs), expanding '$' (*note Variable expansion:: and '~' (*note Tilde expansion::) constructs, but not performing other expansions.  File: kpathsea.info, Node: Standard options, Prev: Auxiliary tasks, Up: Invoking kpsewhich 5.5.4 Standard options ---------------------- Kpsewhich accepts the standard GNU options: * '--help' prints a help message on standard output and exits successfully. * '--version' prints the Kpathsea version number and exits successfully.  File: kpathsea.info, Node: TeX support, Next: Programming, Prev: Path searching, Up: Top 6 TeX support ************* Although the basic features in Kpathsea can be used for any type of path searching, it came about (like all libraries) with a specific application in mind: I wrote Kpathsea specifically for TeX system programs. I had been struggling with the programs I was using (Dvips, Xdvi, and TeX itself) having slightly different notions of how to specify paths; and debugging was painful, since no code was shared. Therefore, Kpathsea provides some TeX-specific formats and features. Indeed, many of the supposedly generic path searching features were provided because they seemed useful in that conTeXt (font lookup, particularly). Kpathsea provides a standard way to search for files of any of the supported file types; glyph fonts are a bit different than all the rest. Searches are based solely on filenames, not file contents--if a GF file is named 'cmr10.600pk', it will be found as a PK file. * Menu: * Supported file formats:: File types Kpathsea knows about. * File lookup:: Searching for most kinds of files. * Glyph lookup:: Searching for bitmap fonts. * Suppressing warnings:: Avoiding warnings via TEX_HUSH. * mktex scripts:: Generating files at runtime.  File: kpathsea.info, Node: Supported file formats, Next: File lookup, Up: TeX support 6.1 Supported file formats ========================== Kpathsea has support for a number of file types. Each file type has a list of environment and config file variables that are checked to define the search path, and most have a default suffix that plays a role in finding files (see the next section). Some also define additional suffixes, and/or a program to be run to create missing files on the fly. Since environment variables containing periods, such as 'TEXINPUTS.latex', are not allowed on some systems, Kpathsea looks for environment variables with an underscore, e.g., 'TEXINPUTS_latex' (*note Config files::). The following table lists the above information. You can also get the list by giving the '--help-formats' option to 'kpsewhich' (*note Auxiliary tasks::). 'afm' (Adobe font metrics, *note (dvips)Metric files::) 'AFMFONTS'; suffix '.afm'. 'base' (Metafont memory dump, *note (web2c)Memory dumps::) 'MFBASES', 'TEXMFINI'; suffix '.base'. 'bib' (BibTeX bibliography source, *note (web2c)bibtex invocation::) 'BIBINPUTS', 'TEXBIB'; suffix '.bib'. 'bltxml' (BibLaTeXML bibliography files for Biber, ) 'BLTXMLINPUTS' suffix '.bltxml'. 'bst' (BibTeX style, *note Basic BibTeX style files: (web2c)Basic BibTeX style files.) 'BSTINPUTS'; suffix '.bst'. 'clua' (dynamic libraries for Lua, ) 'CLUAINPUTS' suffixes '.dll' and '.so'. 'cmap' (character map files) 'CMAPFONTS'; suffix '.cmap'. 'cnf' (Runtime configuration files, *note Config files::) 'TEXMFCNF'; suffix '.cnf'. 'cweb' (CWEB input files) 'CWEBINPUTS'; suffixes '.w', '.web'; additional suffix '.ch'. 'dvips config' (Dvips 'config.*' files, such as 'config.ps', *note (dvips)Config files::) 'TEXCONFIG'. 'enc files' (encoding vectors) 'ENCFONTS'; suffix '.enc'. 'fmt' (TeX memory dump, *note (web2c)Memory dumps::) 'TEXFORMATS', 'TEXMFINI'; suffix '.fmt'. 'font cid map' (CJK mapping) 'FONTCIDMAPS' suffix '.cid'. 'font feature files' (primarily for OpenType font features) 'FONTFEATURES' suffix '.fea'. 'gf' (generic font bitmap, *note (dvips)Glyph files::) 'PROGRAMFONTS', 'GFFONTS', 'GLYPHFONTS', 'TEXFONTS'; suffix 'gf'. 'graphic/figure' (Encapsulated PostScript figures, *note (dvips)PostScript figures::) 'TEXPICTS', 'TEXINPUTS'; additional suffixes: '.eps', '.epsi'. 'ist' (makeindex style files) 'TEXINDEXSTYLE', 'INDEXSTYLE'; suffix '.ist'. 'lig files' (ligature definition files) 'LIGFONTS'; suffix '.lig'. 'ls-R' (Filename databases, *note Filename database::) 'TEXMFDBS'. 'map' (Fontmaps, *note Fontmap::) 'TEXFONTMAPS'; suffix '.map'. 'mem' (MetaPost memory dump, *note (web2c)Memory dumps::) 'MPMEMS', 'TEXMFINI'; suffix '.mem'. 'MetaPost support' (MetaPost support files, used by DMP; *note (web2c)dmp invocation::) 'MPSUPPORT'. 'mf' (Metafont source, *note (web2c)mf invocation::) 'MFINPUTS'; suffix '.mf'; dynamic creation program: 'mktexmf'. 'mfpool' (Metafont program strings, *note (web2c)pooltype invocation::) 'MFPOOL', 'TEXMFINI'; suffix '.pool'. 'mft' ('MFT' style file, *note (web2c)mft invocation::) 'MFTINPUTS'; suffix '.mft'. 'misc fonts' (font-related files that don't fit the other categories) 'MISCFONTS' 'mlbib' (MlBibTeX bibliography source) 'MLBIBINPUTS', 'BIBINPUTS', 'TEXBIB'; suffixes '.mlbib', '.mlbib'. 'mlbst' (MlBibTeX style) 'MLBSTINPUTS', 'BSTINPUTS'; suffixes '.mlbst', '.bst'. 'mp' (MetaPost source, *note (web2c)mpost invocation::) 'MPINPUTS'; suffix '.mp'. 'mppool' (MetaPost program strings, *note (web2c)pooltype invocation::) 'MPPOOL', 'TEXMFINI'; suffix '.pool'. 'ocp' (Omega compiled process files) 'OCPINPUTS'; suffix '.ocp'; dynamic creation program: 'MakeOmegaOCP'. 'ofm' (Omega font metrics) 'OFMFONTS', 'TEXFONTS'; suffixes '.ofm', '.tfm'; dynamic creation program: 'MakeOmegaOFM'. 'opentype fonts' (OpenType fonts) 'OPENTYPEFONTS'. 'opl' (Omega property lists) 'OPLFONTS', 'TEXFONTS'; suffix '.opl'. 'otp' (Omega translation process files) 'OTPINPUTS'; suffix '.otp'. 'ovf' (Omega virtual fonts) 'OVFFONTS', 'TEXFONTS'; suffix '.ovf'. 'ovp' (Omega virtual property lists) 'OVPFONTS', 'TEXFONTS'; suffix '.ovp'. 'pdftex config' (PDFTeX-specific configuration files) 'PDFTEXCONFIG'. 'pk' (packed bitmap fonts, *note (dvips)Glyph files::) 'PROGRAMFONTS' (PROGRAM being 'XDVI', etc.), 'PKFONTS', 'TEXPKS', 'GLYPHFONTS', 'TEXFONTS'; suffix 'pk'; dynamic creation program: 'mktexpk'. 'PostScript header' (downloadable PostScript, *note (dvips)Header files::) 'TEXPSHEADERS', 'PSHEADERS'; additional suffix '.pro'. 'ris' (RIS bibliography files, primarily for Biber, ) 'RISINPUTS' suffix '.ris'. 'subfont definition files' (subfont definition files) 'SFDFONTS' suffix '.sfd'. 'tex' (TeX source, *note (web2c)tex invocation::) 'TEXINPUTS'; suffix '.tex'; additional suffixes: none, because such a list cannot be complete; dynamic creation program: 'mktextex'. 'TeX system documentation' (Documentation files for the TeX system) 'TEXDOCS'. 'TeX system sources' (Source files for the TeX system) 'TEXSOURCES'. 'texmfscripts' (Architecture-independent executables distributed in the texmf trees) 'TEXMFSCRIPTS'. 'texpool' (TeX program strings, *note (web2c)pooltype invocation::) 'TEXPOOL', 'TEXMFINI'; suffix '.pool'. 'tfm' (TeX font metrics, *note (dvips)Metric files::) 'TFMFONTS', 'TEXFONTS'; suffix '.tfm'; dynamic creation program: 'mktextfm'. 'Troff fonts' (Troff fonts, used by DMP; *note (web2c)DMP invocation::) 'TRFONTS'. 'truetype fonts' (TrueType outline fonts) 'TTFONTS'; suffixes '.ttf' and '.TTF', '.ttc' and '.TTC', '.dfont'. 'type1 fonts' (Type 1 PostScript outline fonts, *note (dvips)Glyph files::) 'T1FONTS', 'T1INPUTS', 'TEXPSHEADERS', 'DVIPSHEADERS'; suffixes '.pfa', '.pfb'. 'type42 fonts' (Type 42 PostScript outline fonts) 'T42FONTS'. 'vf' (virtual fonts, *note (dvips)Virtual fonts::) 'VFFONTS', 'TEXFONTS'; suffix '.vf'. 'web' (WEB input files) 'WEBINPUTS'; suffix '.web'; additional suffix '.ch'. 'web2c files' (files specific to the web2c implementation) 'WEB2C'. There are two special cases, because the paths and environment variables always depend on the name of the program: the variable name is constructed by converting the program name to upper case, and then appending 'INPUTS'. Assuming the program is called 'foo', this gives us the following table. 'other text files' (text files used by 'foo') 'FOOINPUTS'. 'other binary files' (binary files used by 'foo') 'FOOINPUTS'. If an environment variable by these names are set, the corresponding 'texmf.cnf' definition won't be looked at (unless, as usual, the environment variable value has an extra ':'). *Note Default expansion::. For the font variables, the intent is that: * 'TEXFONTS' is the default for everything. * 'GLYPHFONTS' is the default for bitmap (or, more precisely, non-metric) files. * Each font format has a variable of its own. * Each program has its own font override path as well; e.g., 'DVIPSFONTS' for Dvipsk. Again, this is for bitmaps, not metrics.  File: kpathsea.info, Node: File lookup, Next: Glyph lookup, Prev: Supported file formats, Up: TeX support 6.2 File lookup =============== This section describes how Kpathsea searches for most files (bitmap font searches are the exception, as described in the next section). Here is the search strategy for a file NAME: 1. If the file format defines default suffixes, and the suffix of NAME name is not already a known suffix for that format, try the name with each default appended, and use alternative names found in the fontmaps if necessary. Example: given 'foo.bar', look for 'foo.bar.tex'. 2. Search for NAME, and if necessary for alternative names found in the fontmaps. Example: given 'foo.bar', we also look for 'foo.bar'. 3. If the file format defines a program to invoke to create missing files, run it (*note mktex scripts::). The order in which we search for "suffixed" name (item 1) or the "as-is" name (item 2) is controlled by the 'try_std_extension_first' configuration value. The default set in 'texmf.cnf' is true, since common suffixes are already recognized: 'babel.sty' will only look for 'babel.sty', not 'babel.sty.tex', regardless of this setting. When the suffix is unknown (e.g., 'foo.bar'), both names are always tried; the difference is the order in which they are tried. 'try_std_extension_first' only affects names being looked up which *already* have an extension. A name without an extension (e.g., 'tex story') will always have an extension added first. This algorithm is implemented in the function 'kpathsea_find_file' in the source file 'kpathsea/tex-file.c'. You can watch it in action with the debugging options (*note Debugging::).  File: kpathsea.info, Node: Glyph lookup, Next: Suppressing warnings, Prev: File lookup, Up: TeX support 6.3 Glyph lookup ================ This section describes how Kpathsea searches for a bitmap font in GF or PK format (or either) given a font name (e.g., 'cmr10') and a resolution (e.g., 600). Here is an outline of the search strategy (details in the sections below) for a file NAME at resolution DPI. The search stops at the first successful lookup. 1. Look for an existing file NAME.DPIFORMAT in the specified format(s). 2. If NAME is an alias for a file F in the fontmap file 'texfonts.map', look for F.DPI. 3. Run an external program (typically named 'mktexpk') to generate the font (*note mktex scripts::) 4. Look for FALLBACK.DPI, where FALLBACK is some last-resort font (typically 'cmr10'). This is implemented in 'kpathsea_find_glyph' in 'kpathsea/tex-glyph.c'. * Menu: * Basic glyph lookup:: Features common to all glyph lookups. * Fontmap:: Aliases for fonts. * Fallback font:: Resolutions and fonts of last resort.  File: kpathsea.info, Node: Basic glyph lookup, Next: Fontmap, Up: Glyph lookup 6.3.1 Basic glyph lookup ------------------------ When Kpathsea looks for a bitmap font NAME at resolution DPI in a format FORMAT, it first checks each directory in the search path for a file 'NAME.DPIFORMAT'; for example, 'cmr10.600pk'. Kpathsea looks for a PK file first, then a GF file. If that fails, Kpathsea looks for 'dpiDPI/NAME.FORMAT'; for example, 'dpi600/cmr10.pk'. This is how fonts are typically stored on filesystems (such as DOS) that permit only three-character extensions. If that fails, Kpathsea looks for a font with a close-enough DPI. "Close enough" is defined by the macro 'KPSE_BITMAP_TOLERANCE' in 'kpathsea/tex-glyph.h' to be 'DPI / 500 + 1'. This is slightly more than the 0.2% minimum allowed by the DVI standard ().  File: kpathsea.info, Node: Fontmap, Next: Fallback font, Prev: Basic glyph lookup, Up: Glyph lookup 6.3.2 Fontmap ------------- If a bitmap font or metric file is not found with the original name (see the previous section), Kpathsea looks through any "fontmap" files for an "alias" for the original font name. These files are named 'texfonts.map' and searched for along the 'TEXFONTMAPS' environment/config file variable. All 'texfonts.map' files that are found are read; earlier definitions override later ones. This feature is intended to help in two respects: 1. An alias name is limited in length only by available memory, not by your filesystem. Therefore, if you want to ask for 'Times-Roman' instead of 'ptmr', you can (you get 'ptmr8r'). 2. A few fonts have historically had multiple names: specifically, LaTeX's "circle font" has variously been known as 'circle10', 'lcircle10', and 'lcirc10'. Aliases can make all the names equivalent, so that it no longer matters what the name of the installed file is; TeX documents will find their favorite name. The format of fontmap files is straightforward: * Comments start with '%' and continue to the end of the line. * Blank lines are ignored. * Each nonblank line is broken up into a series of "words": a sequence of non-whitespace characters. * If the first word is 'include', the second word is used as a filename, and it is searched for and read. * Otherwise, the first word on each line is the true filename; * the second word is the alias; * subsequent words are ignored. If an alias has an extension, it matches only those files with that extension; otherwise, it matches anything with the same root, regardless of extension. For example, an alias 'foo.tfm' matches only when 'foo.tfm' is being searched for; but an alias 'foo' matches 'foo.vf', 'foo.600pk', etc. As an example, here is an excerpt from the 'texfonts.map' in the Web2c distribution. It makes the old and new names of the LaTeX circle fonts equivalent. circle10 lcircle10 circle10 lcirc10 lcircle10 circle10 lcircle10 lcirc10 lcirc10 circle10 lcirc10 lcircle10 ... Fontmaps are implemented in the file 'kpathsea/fontmap.c'. The Fontname distribution has much more information on font naming (*note (fontname)::).  File: kpathsea.info, Node: Fallback font, Prev: Fontmap, Up: Glyph lookup 6.3.3 Fallback font ------------------- If a bitmap font cannot be found or created at the requested size, Kpathsea looks for the font at a set of "fallback resolutions". You specify these resolutions as a colon-separated list (like search paths). Kpathsea looks first for a program-specific environment variable (e.g., 'DVIPSSIZES' for Dvipsk), then the environment variable 'TEXSIZES', then a default specified at compilation time (the Make variable 'default_texsizes'). You can set this list to be empty if you prefer to find fonts at their stated size or not at all. Finally, if the font cannot be found even at the fallback resolutions, Kpathsea looks for a fallback font, typically 'cmr10'. Programs must enable this feature by calling 'kpathsea_init_prog' (*note Calling sequence::); the default is no fallback font.  File: kpathsea.info, Node: Suppressing warnings, Next: mktex scripts, Prev: Glyph lookup, Up: TeX support 6.4 Suppressing warnings ======================== Kpathsea provides a way to suppress selected usually-harmless warnings; this is useful at large sites where most users are not administrators, and thus the warnings are merely a source of confusion, not a help. To do this, you set the environment variable or configuration file value 'TEX_HUSH' to a colon-separated list of values. Here are the possibilities: 'all' Suppress everything possible. 'checksum' Suppress mismatched font checksum warnings. 'lostchar' Suppress warnings when a character is missing from a font that a DVI or VF file tries to typeset. 'none' Don't suppress any warnings. 'readable' Suppress warnings about attempts to access a file whose permissions render it unreadable. 'special' Suppresses warnings about an unimplemented or unparsable '\special' command. 'tex-hush.c' defines the function that checks the variable value. Each driver implements its own checks where appropriate.  File: kpathsea.info, Node: mktex scripts, Prev: Suppressing warnings, Up: TeX support 6.5 'mktex' scripts =================== If Kpathsea cannot otherwise find a file, for some file types it is configured by default to invoke an external program to create it dynamically (*note mktex configuration::). These are collectively known as "'mktex' scripts", since most of them are named 'mktex...'. For example, this is useful for fonts (bitmaps, TFM's, and arbitrarily-sizable Metafont sources such as the Sauter and EC fonts), since any given document can use fonts never before referenced. Building all fonts in advance is therefore impractical, if not impossible. It is also useful for the TeX '.fmt' (and Metafont '.base' and Metapost '.mem' files, *note (Web2c)Memory dumps::), where pre-generating every format consumes a lot of both time and space. The script is passed the name of the file to create and possibly other arguments, as explained below. It must echo the full pathname of the file it created (and nothing else) to standard output; it can write diagnostics to standard error. * Menu: * config: mktex configuration. * names: mktex script names. * args: mktex script arguments.  File: kpathsea.info, Node: mktex configuration, Next: mktex script names, Up: mktex scripts 6.5.1 'mktex' configuration --------------------------- The list of file types and program names that can run an external program to create missing files is listed in the next section. In the absence of 'configure' options specifying otherwise, everything but 'mktextex' will be enabled by default. The 'configure' options to change the defaults are: --without-mktexfmt-default --without-mktexmf-default --without-mktexocp-default --without-mktexofm-default --without-mktexpk-default --without-mktextfm-default --with-mktextex-default The 'configure' setting is overridden if the environment variable or configuration file value named for the script is set; e.g., 'MKTEXPK' (*note mktex script arguments::). 'mktexfmt' reads a file 'fmtutil.cnf', typically located in 'texmf/web2c/' to glean its configuration information. The rest of the files and features in this section are primarily intended for the font generation scripts. As distributed, all the scripts source a file 'texmf/web2c/mktex.cnf' if it exists, so you can override various defaults. See 'mktex.opt', for instance, which defines the default mode, resolution, some special directory names, etc. If you prefer not to change the distributed scripts, you can simply create 'mktex.cnf' with the appropriate definitions (you do not need to create it if you have nothing to put in it). 'mktex.cnf' has no special syntax; it's an arbitrary Bourne shell script. The distribution contains a sample 'mktex.cnf' for you to copy and modify as you please (it is not installed anywhere). In addition, you can configure a number of features with the 'MT_FEATURES' variable, which you can define: * in 'mktex.opt', as just mentioned; * by editing the file 'mktex.opt', either before 'make install' (in the source hierarchy) or after (in the installed hierarchy); * or in the environment. If none of the options below are enabled, 'mktexpk', 'mktextfm', and 'mktexmf' follow the following procedure to decide where fonts should be installed. Find the tree where the font's sources are, and test the permissions of the 'fonts' directory of that tree to determine whether it is writable. If it is, put the files in the tree in appropriate locations. If it isn't writable, see whether the tree is a system tree (named in 'SYSTEXMF'). If so, the 'VARTEXFONTS' tree is used. In all other cases the working directory is used. The 'appendonlydir' option is enabled by default. 'appendonlydir' Tell 'mktexdir' to create directories append-only, i.e., set their sticky bit (*note (coreutils)Mode Structure::). This feature is silently ignored on non-Unix platforms (e.g. Windows/NT and MS-DOS) which don't support similar functionality. This feature is enabled by default. 'dosnames' Use 8.3 names; e.g., 'dpi600/cmr10.pk' instead of 'cmr10.600pk'. Note that this feature only affects filenames that would otherwise clash with other TeX-related filenames; 'mktex' scripts do nothing about filenames which exceed the 8+3 MS-DOS limits but remain unique when truncated (by the OS) to these limits, and nether do the scripts care about possible clashes with files which aren't related with TeX. For example, 'cmr10.600pk' would clash with 'cmr10.600gf' and is therefore changed when 'dosnames' is in effect, but 'mf.pool' and 'mp.base' don't clash with any TeX-related files and are therefore unchanged. This feature is turned on by default on MS-DOS. If you do not wish 'dosnames' to be set on an MS-DOS platform, you need to set the 'MT_FEATURES' environment variable to a value that doesn't include 'dosnames'. You can also change the default setting by editing 'mktex.opt', but only if you use the 'mktex' shell scripts; the emulation programs don't consult 'mktex.opt'. 'fontmaps' Instead of deriving the location of a font in the destination tree from the location of the sources, the aliases and directory names from the Fontname distribution are used. (*note Introduction: (fontname)Top.). 'nomfdrivers' Let mktexpk and mktextfm create metafont driver files in a temporary directory. These will be used for just one metafont run and not installed permanently. 'nomode' Omit the directory level for the mode name; this is fine as long as you generate fonts for only one mode. 'stripsupplier' Omit the font supplier name directory level. 'striptypeface' Omit the font typeface name directory level. 'strip' Omit the font supplier and typeface name directory levels. This feature is deprecated in favour of 'stripsupplier' and 'striptypeface'. 'varfonts' When this option is enabled, fonts that would otherwise be written in system texmf tree go to the 'VARTEXFONTS' tree instead. The default value in 'kpathsea/Makefile.in' is '/var/tmp/texfonts'. The 'Linux File System Standard' recommends '/var/tex/fonts'. The 'varfonts' setting in 'MT_FEATURES' is overridden by the 'USE_VARTEXFONTS' environment variable: if set to '1', the feature is enabled, and if set to '0', the feature is disabled. 'texmfvar' Force generated files that would go into a system tree (as defined by 'SYSTEXMF') into 'TEXMFVAR'. Starting with teTeX-3.0, the variable 'TEXMFVAR' is always set. The 'varfonts' feature takes precedence if also set. The 'texmfvar' setting in 'MT_FEATURES' is overridden by the 'USE_TEXMFVAR' environment variable: if set to '1', the feature is enabled, and if set to '0', the feature is disabled.  File: kpathsea.info, Node: mktex script names, Next: mktex script arguments, Prev: mktex configuration, Up: mktex scripts 6.5.2 'mktex' script names -------------------------- The following table shows the default name of the script for each of the file types which support runtime generation. 'mktexfmt' ('.fmt', '.base', '.mem') TeX/Metafont/MetaPost formats. This script is also named 'fmtutil', and reads 'fmtutil.cnf' for configuration information. 'mktexmf' ('.mf') Metafont input files. 'mkocp' ('.ocp') Omega compiled process files. 'mkofm' ('.ofm') Omega font metric files. 'mktexpk' ('pk') Glyph fonts. 'mktextex' ('.tex') TeX input files (disabled by default). 'mktextfm' ('.tfm') TFM files. These names can be overridden by an environment variable specific to the program--for example, 'DVIPSMAKEPK' for Dvipsk. If a 'mktex...' script fails, the invocation is appended to a file 'missfont.log' (by default) in the current directory. You can then execute the log file to create the missing files after fixing the problem. If the current directory is not writable and the environment variable or configuration file value 'TEXMFOUTPUT' is set, its value is used. Otherwise, nothing is written. The name 'missfont.log' is overridden by the 'MISSFONT_LOG' environment variable or configuration file value.  File: kpathsea.info, Node: mktex script arguments, Prev: mktex script names, Up: mktex scripts 6.5.3 'mktex' script arguments ------------------------------ The first argument to a 'mktex' script is always the name of the file to be created. In the default 'mktexpk' implementation, additional arguments may also be passed: '--dpi NUM' Sets the resolution of the generated font to NUM. '--mfmode NAME' Sets the Metafont mode to NAME. '--bdpi NUM' Sets the "base dpi" for the font. This must match the mode being used. '--mag STRING' A "magstep" string suitable for the Metafont 'mag' variable. This must match the combination of BDPI and DPI being used. '--destdir STRING' A directory name. If the directory is absolute, it is used as-is. Otherwise, it is appended to the root destination directory set in the script.  File: kpathsea.info, Node: Programming, Next: Reporting bugs, Prev: TeX support, Up: Top 7 Programming ************* This chapter is for programmers who wish to use Kpathsea. *Note Introduction::, for the conditions under which you may do so. * Menu: * Overview: Programming overview. Introduction. * Calling sequence:: Specifics of what to call. * Program-specific files:: How to handle these. * Config: Programming with config files. Getting info from texmf.cnf.  File: kpathsea.info, Node: Programming overview, Next: Calling sequence, Up: Programming 7.1 Programming overview ======================== Aside from this manual, your best source of information is the source to the programs that use Kpathsea (*note Introduction::). Of those, Dviljk is probably the simplest, and hence a good place to start. Xdvik adds VF support and the complication of X resources. Dvipsk adds the complication of its own config files. Web2c is source code I also maintain, so it uses Kpathsea rather straightforwardly, but is of course complicated by the Web to C translation. Finally, Kpsewhich is a small utility program whose sole purpose is to exercise the main path-searching functionality. When looking at these program sources, you should know that previous versions of the library had a different programming interface, to support re-entrancy. In that interface the library function names were prefixed with 'kpse_' instead of 'kpathsea_', and they did not need an instance variable as first argument. This change was made in 2009. Some of the programs mentioned above may still be using the previous interface. Beyond these examples, the '.h' files in the Kpathsea source describe the interfaces and functionality (and of course the '.c' files define the actual routines, which are the ultimate documentation). 'pathsearch.h' declares the basic searching routine. 'tex-file.h' and 'tex-glyph.h' define the interfaces for looking up particular kinds of files. In view of the way the headers depend on each other, it is recommended to use '#include ', which includes every Kpathsea header. If you want to include only specific headers, you should still consider including 'kpathsea/config.h' before including any other Kpathsea header, as it provides symbols used in the other headers. Note that 'kpathsea/config.h' includes 'kpathsea/c-auto.h', which is generated by Autoconf. The library provides no way for an external program to register new file types: 'tex-file.[ch]' must be modified to do this. For example, Kpathsea has support for looking up Dvips config files, even though no program other than Dvips will likely ever want to do so. I felt this was acceptable, since along with new file types should also come new defaults in 'texmf.cnf' (and its descendant 'paths.h'), since it's simplest for users if they can modify one configuration file for all kinds of paths. Kpathsea does not parse any formats itself; it barely opens any files. Its primary purpose is to return filenames. The GNU font utilities does contain libraries to read TFM, GF, and PK files, as do the programs above, of course.  File: kpathsea.info, Node: Calling sequence, Next: Program-specific files, Prev: Programming overview, Up: Programming 7.2 Calling sequence ==================== The typical way to use Kpathsea in your program goes something like this: 1. Call 'kpathsea_new' to create a new library instance. This variable must be passed as the first argument to all the following library functions. The rest of this manual will be using 'kpse' as a placeholder for the name of this variable. 2. Call 'kpathsea_set_program_name' with 'argv[0]' as the second argument; the third argument is a string or 'NULL'. The third argument is used by Kpathsea as the program name for the '.PROGRAM' feature of config files (*note Config files::). If the third argument is 'NULL', the value of the second argument is used. This function must be called before any other use of the Kpathsea library. 'kpathsea_set_program_name' always sets the variables 'kpse->invocation_name' and 'kpse->invocation_short_name'. These variables are used in the error message macros defined in 'kpathsea/lib.h'. It sets the variable 'kpse->program_name' to the program name it uses. It also initializes debugging options based on the environment variable 'KPATHSEA_DEBUG' (if that is set). Finally, it sets the environment variables 'SELFAUTOLOC', 'SELFAUTODIR' and 'SELFAUTOPARENT' to the location, parent and grandparent directory of the executable, removing '.' and '..' path elements and resolving symbolic links. These are used in the default configuration file to allow people to invoke TeX from anywhere. You can use 'kpsewhich --expand-var=\$SELFAUTOLOC', etc., to see the values. 3. Set debugging options. *Note Debugging::. If your program doesn't have a debugging option already, you can define one and set 'kpse->debug' to the number that the user supplies (as in Dviljk and Web2c), or you can just omit this altogether (people can always set 'KPATHSEA_DEBUG'). If you do have runtime debugging already, you need to merge Kpathsea's options with yours (as in Dvipsk and Xdvik). 4. If your program has its own configuration files that can define search paths, you should assign those paths to the 'client_path' member in the appropriate element of the 'kpse->format_info' array. (This array is indexed by file type; see 'tex-file.h'.) See 'resident.c' in Dvipsk for an example. 5. Call 'kpathsea_init_prog' (see 'proginit.c'). It's useful for the DVI drivers, at least, but for other programs it may be simpler to extract the parts of it that actually apply. This does not initialize any paths, it just looks for (and sets) certain environment variables and other random information. (A search path is always initialized at the first call to find a file of that type; this eliminates much useless work, e.g., initializing the BibTeX search paths in a DVI driver.) 6. The routine to actually find a file of type FORMAT is 'kpathsea_find_file'. You can call 'kpathsea_find_file' after doing only the first and second of the initialization steps above--Kpathsea automatically reads the 'texmf.cnf' generic config files, looks for environment variables, and does expansions at the first lookup. 7. To find PK and/or GF bitmap fonts, the routine is 'kpathsea_find_glyph', defined in 'tex-glyph.h'. This returns a structure in addition to the resultant filename, because fonts can be found in so many ways. See the documentation in the source. 8. To actually open a file, not just return a filename, call 'kpathsea_open_file'. This function takes the name to look up and a Kpathsea file format as arguments, and returns the usual 'FILE *'. It always assumes the file must exist, and thus will search the disk if necessary (unless the search path specified '!!', etc.). In other words, if you are looking up a VF or some other file that need not exist, don't use this. 9. TeX can write output files, via the '\openout' primitive; this opens a security hole vulnerable to Trojan horse attack: an unwitting user could run a TeX program that overwrites, say, '~/.rhosts'. Analogous security holes exist for many other programs. To alleviate this, there is a configuration variable 'openout_any', which selects one of three levels of security. When it is set to 'a' (for "any"), no restrictions are imposed. When it is set to 'r' (for "restricted"), filenames beginning with '.' are disallowed (except '.tex' because LaTeX needs it). When it is set to 'p' (for "paranoid") additional restrictions are imposed: an absolute filename must refer to a file in (a subdirectory) of 'TEXMFOUTPUT', and any attempt to go up a directory level is forbidden (that is, paths may not contain a '..' component). The paranoid setting is the default. (For backwards compatibility, 'y' and '1' are synonyms of 'a', while 'n' and '0' are synonyms for 'r'.) The function 'kpathsea_out_name_ok', with a filename as second argument, returns 'true' if that filename is acceptable to be opend for output or 'false' otherwise. 10. Similarly, the function 'kpathsea_in_name_ok', with a filename as second argument, returns 'true' if that filename is acceptable to be opend for input or 'false' otherwise, depending on the value of the configuration variable 'openin_any' (with 'a' as default). 11. To close the kpathsea library instance you are using, call 'kpathsea_finish'. This function closes any open log files and frees the memory used by the instance. Kpathsea also provides many utility routines. Some are generic: hash tables, memory allocation, string concatenation and copying, string lists, reading input lines of arbitrary length, etc. Others are filename-related: default path, tilde, and variable expansion, 'stat' calls, etc. (Perhaps someday I'll move the former to a separate library.) The 'c-*.h' header files can also help your program adapt to many different systems. You will almost certainly want to use Autoconf and probably Automake for configuring and building your software if you use Kpathsea; I strongly recommend using Autoconf and Automake regardless. They are available from .  File: kpathsea.info, Node: Program-specific files, Next: Programming with config files, Prev: Calling sequence, Up: Programming 7.3 Program-specific files ========================== Many programs will need to find some configuration files. Kpathsea contains some support to make it easy to place them in their own directories. The Standard TeX directory structure (*note Introduction: (tds)Top.), specifies that such files should go into a subdirectory named after the program, like 'texmf/ttf2pk'. Two formats, 'kpse_program_text_format' and 'kpse_program_binary_format', use '.:$TEXMF/PROGRAM//' as their compiled-in search path. To override this default, you can use the variable 'PROGRAMINPUTS' in the environment and/or 'texmf.cnf'. That is to say, the name of the variable is constructed by converting the name of the program to upper case, and appending 'INPUTS'. The only difference between these two formats is whether 'kpathsea_open_file' will open the files it finds in text or binary mode.  File: kpathsea.info, Node: Programming with config files, Prev: Program-specific files, Up: Programming 7.4 Programming with config files ================================= You can (and probably should) use the same 'texmf.cnf' configuration file that Kpathsea uses for your program. This helps installers by keeping all configuration in one place. To retrieve a value VAR from config files, the best way is to call 'kpathsea_var_value' on the string 'VAR'. This will look first for an environment variable VAR, then a config file value. The result will be the value found or 'NULL'. This function is declared in 'kpathsea/variable.h'. For an example, see the 'shell_escape' code in 'web2c/lib/texmfmp.c'. The routine to do variable expansion in the context of a search path (as opposed to simply retrieving a value) is 'kpathsea_var_expand', also declared in 'kpathsea/variable.h'. It's generally only necessary to set the search path structure components as explained in the previous section, rather than using this yourself. If for some reason you want to retrieve a value _only_ from a config file, not automatically looking for a corresponding environment variable, call 'kpathsea_cnf_get' (declared in 'kpathsea/cnf.h') with the string VAR. No initialization calls are needed.  File: kpathsea.info, Node: Reporting bugs, Next: Index, Prev: Programming, Up: Top 8 Reporting bugs **************** If you have problems or suggestions, please report them to using the bug checklist below. Please report bugs in the documentation; not only factual errors or inconsistent behavior, but unclear or incomplete explanations, typos, wrong fonts, ... * Menu: * Bug checklist:: What to include in a good bug report. * Mailing lists:: Joining the bugs or announcements mailing lists. * Debugging:: Analyzing runtime problems. * Logging:: Recording searches. * Common problems:: When things go wrong.  File: kpathsea.info, Node: Bug checklist, Next: Mailing lists, Up: Reporting bugs 8.1 Bug checklist ================= Before reporting a bug, please check below to be sure it isn't already known (*note Common problems::). Bug reports should be sent via electronic mail to . The general principle is that a good bug report includes all the information necessary for reproduction. Therefore, to enable investigation, your report should include the following: * The version number(s) of the program(s) involved, and of Kpathsea itself. You can get the former by giving a sole option '--version' to the program, and the latter by running 'kpsewhich --version'. The 'NEWS' and 'ChangeLog' files also contain the version number. * The hardware, operating system (including version), compiler, and 'make' program you are using (the output of 'uname -a' is a start on the first two, though incomplete). * Any options you gave to 'configure'. This is recorded in the 'config.status' files. If you are reporting a bug in 'configure' itself, it's probably system-dependent, and it will be unlikely the maintainers can do anything useful if you merely report that thus-and-such is broken. Therefore, you need to do some additional work: for some bugs, you can look in the file 'config.log' where the test that failed should appear, along with the compiler invocation and source program in question. You can then compile it yourself by hand, and discover why the test failed. Other 'configure' bugs do not involve the compiler; in that case, the only recourse is to inspect the 'configure' shell script itself, or the Autoconf macros that generated 'configure'. * The log of all debugging output, if the bug is in path searching. You can get this by setting the environment variable 'KPATHSEA_DEBUG' to '-1' before running the program. Please look at the log yourself to make sure the behavior is really a bug before reporting it; perhaps "old" environment variable settings are causing files not to be found, for example. * The contents of any input files necessary to reproduce the bug. For bugs in DVI-reading programs, for example, this generally means a DVI file (and any EPS or other files it uses)--TeX source files are helpful, but the DVI file is required, because that's the actual program input. * If you are sending a patch (do so if you can!), please do so in the form of a context diff ('diff -c') against the original distribution source. Any other form of diff is either not as complete or harder for me to understand. Please also include a 'ChangeLog' entry. * If the bug involved is an actual crash (i.e., core dump), it is easy and useful to include a stack trace from a debugger (I recommend the GNU debugger GDB (). If the cause is apparent (a 'NULL' value being dereferenced, for example), please send the details along. If the program involved is TeX or Metafont, and the crash is happening at apparently-sound code, however, the bug may well be in the compiler, rather than in the program or the library (*note TeX or Metafont failing: TeX or Metafont failing.). * Any additional information that will be helpful in reproducing, diagnosing, or fixing the bug.  File: kpathsea.info, Node: Mailing lists, Next: Debugging, Prev: Bug checklist, Up: Reporting bugs 8.2 Mailing lists ================= Web2c and Kpathsea in general are discussed on the mailing list . You can subscribe and peruse the archives on the web . You do not need to join to submit a report, nor will it affect whether you get a response. Be aware that large data files are sometimes included in bug reports. If this is a problem for you, do not join the list. If you are looking for general TeX help, such as how to install a full TeX system or how to use LaTeX, please see .  File: kpathsea.info, Node: Debugging, Next: Logging, Prev: Mailing lists, Up: Reporting bugs 8.3 Debugging ============= Kpathsea provides a number of runtime debugging options, detailed below by their names and corresponding numeric values. When the files you expect aren't being found, the thing to do is enable these options and examine the output. You can set these with some runtime argument (e.g., '-d') to the program; in that case, you should use the numeric values described in the program's documentation (which, for Dvipsk and Xdvik, are different than those below). It's best to give the '-d' (or whatever) option first, for maximal output. Dvipsk and Xdvik have additional program-specific debugging options as well. You can also set the environment variable 'KPATHSEA_DEBUG'; in this case, you should use the numbers below. If you run the program under a debugger and set the instance variable 'kpse->debug', also use the numbers below. In any case, by far the simplest value to use is '-1', which will turn on all debugging output. This is usually better than guessing which particular values will yield the output you need. Debugging output always goes to standard error, so you can redirect it easily. For example, in Bourne-compatible shells: dvips -d -1 ... 2>/tmp/debug It is sometimes helpful to run the standalone Kpsewhich utility (*note Invoking kpsewhich::), instead of the original program. In any case, you cannot use the names below; you must always use somebody's numbers. (Sorry.) To set more than one option, just sum the corresponding numbers. 'KPSE_DEBUG_STAT (1)' Report 'stat'(2) calls. This is useful for verifying that your directory structure is not forcing Kpathsea to do many additional file tests (*note Slow path searching::, and *note Subdirectory expansion::). If you are using an up-to-date 'ls-R' database (*note Filename database::), this should produce no output unless a nonexistent file that must exist is searched for. 'KPSE_DEBUG_HASH (2)' Report lookups in all hash tables: 'ls-R' and 'aliases' (*note Filename database::); font aliases (*note Fontmap::); and config file values (*note Config files::). Useful when expected values are not being found, e.g.., file searches are looking at the disk instead of using 'ls-R'. 'KPSE_DEBUG_FOPEN (4)' Report file openings and closings. Especially useful when your system's file table is full, for seeing which files have been opened but never closed. In case you want to set breakpoints in a debugger: this works by redefining 'fopen' ('fclose') to be 'kpse_fopen_trace' ('kpse_fclose_trace'). 'KPSE_DEBUG_PATHS (8)' Report general path information for each file type Kpathsea is asked to search. This is useful when you are trying to track down how a particular path got defined--from 'texmf.cnf', 'config.ps', an environment variable, the compile-time default, etc. This is the contents of the 'kpse_format_info_type' structure defined in 'tex-file.h'. 'KPSE_DEBUG_EXPAND (16)' Report the directory list corresponding to each path element Kpathsea searches. This is only relevant when Kpathsea searches the disk, since 'ls-R' searches don't look through directory lists in this way. 'KPSE_DEBUG_SEARCH (32)' Report on each file search: the name of the file searched for, the path searched in, whether or not the file must exist (when drivers search for 'cmr10.vf', it need not exist), and whether or not we are collecting all occurrences of the file in the path (as with, e.g., 'texmf.cnf' and 'texfonts.map'), or just the first (as with most lookups). This can help you correlate what Kpathsea is doing with what is in your input file. 'KPSE_DEBUG_VARS (64)' Report the value of each variable Kpathsea looks up. This is useful for verifying that variables do indeed obtain their correct values. 'GSFTOPK_DEBUG (128)' Activates debugging printout specific to 'gsftopk' program. 'MAKETEX_DEBUG (512)' If you use the optional 'mktex' programs instead of the traditional shell scripts, this will report the name of the site file ('mktex.cnf' by default) which is read, directories created by 'mktexdir', the full path of the 'ls-R' database built by 'mktexlsr', font map searches, 'MT_FEATURES' in effect, parameters from 'mktexnam', filenames added by 'mktexupd', and some subsidiary commands run by the programs. 'MAKETEX_FINE_DEBUG (1024)' When the optional 'mktex' programs are used, this will print additional debugging info from functions internal to these programs. Debugging output from Kpathsea is always written to standard error, and begins with the string 'kdebug:'. (Except for hash table buckets, which just start with the number, but you can only get that output running under a debugger. See comments at the 'hash_summary_only' variable in 'kpathsea/db.c'.)  File: kpathsea.info, Node: Logging, Next: Common problems, Prev: Debugging, Up: Reporting bugs 8.4 Logging =========== Kpathsea can record the time and filename found for each successful search. This may be useful in finding good candidates for deletion when your filesystem is full, or in discovering usage patterns at your site. To do this, define the environment or config file variable 'TEXMFLOG'. The value is the name of the file to append the information to. The file is created if it doesn't exist, and appended to if it does. Each successful search turns into one line in the log file: two words separated by a space. The first word is the time of the search, as the integer number of seconds since "the epoch", i.e., UTC midnight 1 January 1970 (more precisely, the result of the 'time' system call). The second word is the filename. For example, after 'setenv TEXMFLOG /tmp/log', running Dvips on 'story.dvi' appends the following lines: 774455887 /usr/local/share/texmf/dvips/config.ps 774455887 /usr/local/share/texmf/dvips/psfonts.map 774455888 /usr/local/share/texmf/dvips/texc.pro 774455888 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmbx10.600pk 774455889 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmsl10.600pk 774455889 /usr/local/share/texmf/fonts/pk/ljfour/public/cm/cmr10.600pk 774455889 /usr/local/share/texmf/dvips/texc.pro Only filenames that are absolute are recorded, to preserve some semblance of privacy. In addition to this Kpathsea-specific logging, 'pdftex' provides an option '-recorder' to write the names of all files accessed during a run to the file 'BASEFILE.fls'. Finally, most systems provide a general tool to output each system call, thus including opening and closing files. It might be named 'strace', 'truss', 'struss', or something else.  File: kpathsea.info, Node: Common problems, Prev: Logging, Up: Reporting bugs 8.5 Common problems =================== Here are some common problems with configuration, compilation, linking, execution, ... * Menu: * Unable to find files:: If your program can't find fonts (or whatever). * Slow path searching:: If it takes forever to find anything. * Unable to generate fonts:: If mktexpk fails. * TeX or Metafont failing:: Likely compiler bugs.  File: kpathsea.info, Node: Unable to find files, Next: Slow path searching, Up: Common problems 8.5.1 Unable to find files -------------------------- If a program complains it cannot find fonts (or other input files), any of several things might be wrong. In any case, you may find the debugging options helpful. *Note Debugging::. * Perhaps you simply haven't installed all the necessary files; the basic fonts and input files are distributed separately from the programs. *Note unixtex.ftp::. * You have (perhaps unknowingly) told Kpathsea to use search paths that don't reflect where the files actually are. One common cause is having environment variables set from a previous installation, thus overriding what you carefully set in 'texmf.cnf' (*note Supported file formats::). System '/etc/profile' or other files such may be the culprit. * Your files reside in a directory that is only pointed to via a symbolic link, in a leaf directory and is not listed in 'ls-R'. Unfortunately, Kpathsea's subdirectory searching has an irremediable deficiency: If a directory D being searched for subdirectories contains plain files and symbolic links to other directories, but no true subdirectories, D will be considered a leaf directory, i.e., the symbolic links will not be followed. *Note Subdirectory expansion::. You can work around this problem by creating an empty dummy subdirectory in D. Then D will no longer be a leaf, and the symlinks will be followed. The directory immediately followed by the '//' in the path specification, however, is always searched for subdirectories, even if it is a leaf. Presumably you would not have asked for the directory to be searched for subdirectories if you didn't want it to be. * If the fonts (or whatever) don't already exist, 'mktexpk' (or 'mktexmf' or 'mktextfm') will try to create them. If these rather complicated shell scripts fail, you'll eventually get an error message saying something like 'Can't find font FONTNAME'. The best solution is to fix (or at least report) the bug in 'mktexpk'; the workaround is to generate the necessary fonts by hand with Metafont, or to grab them from a CTAN site (*note unixtex.ftp::). * There is a bug in the library. *Note Reporting bugs::.  File: kpathsea.info, Node: Slow path searching, Next: Unable to generate fonts, Prev: Unable to find files, Up: Common problems 8.5.2 Slow path searching ------------------------- If your program takes an excessively long time to find fonts or other input files, but does eventually succeed, here are some possible culprits: * Most likely, you just have a lot of directories to search, and that takes a noticeable time. The solution is to create and maintain a separate 'ls-R' file that lists all the files in your main TeX hierarchy. *Note Filename database::. Kpathsea always uses 'ls-R' if it's present; there's no need to recompile or reconfigure any of the programs. * Your recursively-searched directories (e.g., '/usr/local/share/texmf/fonts//'), contain a mixture of files and directories. This prevents Kpathsea from using a useful optimization (*note Subdirectory expansion::). It is best to have only directories (and perhaps a 'README') in the upper levels of the directory structure, and it's very important to have _only_ files, and no subdirectories, in the leaf directories where the dozens of TFM, PK, or whatever files reside. In any case, you may find the debugging options helpful in determining precisely when the disk or network is being pounded. *Note Debugging::.  File: kpathsea.info, Node: Unable to generate fonts, Next: TeX or Metafont failing, Prev: Slow path searching, Up: Common problems 8.5.3 Unable to generate fonts ------------------------------ Metafont outputs fonts in bitmap format, tuned for a particular device at a particular resolution, in order to allow for the highest-possible quality of output. Some DVI-to-whatever programs, such as Dvips, try to generate these on the fly when they are needed, but this generation may fail in several cases. If 'mktexpk' runs, but fails with this error: mktexpk: Can't guess mode for NNN dpi devices. mktexpk: Use a config file to specify the mode, or update me. you need to ensure the resolution and mode match; just specifying the resolution, as in '-D 360', is not enough. You can specify the mode name with the '-mode' option on the Dvips command line, or in a Dvips configuration file (*note (dvips)Config files::), such as 'config.ps' in your document directory, '~/.dvipsrc' in your home directory, or in a system directory (again named 'config.ps'). (Other drivers use other files, naturally.) For example, if you need 360dpi fonts, you could include this in a configuration file: D 360 M lqmed If Metafont runs, but generates fonts at the wrong resolution or for the wrong device, most likely 'mktexpk''s built-in guess for the mode is wrong, and you should override it as above. See for a list of resolutions and mode names for most devices (additional submissions are welcome). If Metafont runs but generates fonts at a resolution of 2602dpi (and prints out the name of each character as well as just a character number, and maybe tries to display the characters), then your Metafont base file probably hasn't been made properly. (It's using the default 'proof' mode, instead of an actual device mode.) To make a proper 'plain.base', assuming the local mode definitions are contained in a file 'modes.mf', run the following command (assuming Unix): inimf "plain; input modes; dump" Then copy the 'plain.base' file from the current directory to where the base files are stored on your system ('/usr/local/share/texmf/web2c' by default), and make a link (either hard or soft) from 'plain.base' to 'mf.base' in that directory. *Note (web2c)inimf invocation::. If 'mf' is a command not found at all by 'mktexpk', then you need to install Metafont (*note unixtex.ftp::).  File: kpathsea.info, Node: TeX or Metafont failing, Prev: Unable to generate fonts, Up: Common problems 8.5.4 TeX or Metafont failing ----------------------------- If TeX or Metafont get a segmentation fault or otherwise fail while running a normal input file, the problem is usually a compiler bug (unlikely as that may sound). Even if the trip and trap tests are passed, problems may lurk. Optimization occasionally causes trouble in programs other than TeX and Metafont themselves, too. Insufficient swap space may also cause core dumps or other erratic behavior. For a workaround, if you enabled any optimization flags, it's best to omit optimization entirely. In any case, the way to find the facts is to run the program under the debugger and see where it's failing. Also, if you have trouble with a system C compiler, I advise trying the GNU C compiler. And vice versa, unfortunately; but in that case I also recommend reporting a bug to the GCC mailing list; see *note (gcc)Bugs::. To report compiler bugs effectively requires perseverance and perspicacity: you must find the miscompiled line, and that usually involves delving backwards in time from the point of error, checking through TeX's (or whatever program's) data structures. Things are not helped by all-too-common bugs in the debugger itself. Good luck.  File: kpathsea.info, Node: Index, Prev: Reporting bugs, Up: Top Index ***** [index] * Menu: * !! in path specifications: ls-R. (line 51) * $ expansion: Variable expansion. (line 6) * --all: Path searching options. (line 12) * --color=tty: ls-R. (line 21) * --debug=NUM: Auxiliary tasks. (line 9) * --dpi=NUM: Path searching options. (line 17) * --engine=NAME: Path searching options. (line 21) * --expand-braces=STRING: Auxiliary tasks. (line 12) * --expand-path=STRING: Auxiliary tasks. (line 16) * --expand-var=STRING: Auxiliary tasks. (line 34) * --format=NAME: Path searching options. (line 37) * --help: Standard options. (line 8) * --help-formats: Auxiliary tasks. (line 39) * --interactive: Path searching options. (line 119) * --mktex=FILETYPE: Path searching options. (line 124) * --mode=STRING: Path searching options. (line 130) * --must-exist: Path searching options. (line 135) * --no-mktex=FILETYPE: Path searching options. (line 124) * --path=STRING: Path searching options. (line 140) * --progname=NAME: Path searching options. (line 148) * --safe-in-name=NAME: Auxiliary tasks. (line 45) * --safe-out-name=NAME: Auxiliary tasks. (line 45) * --show-path=NAME: Auxiliary tasks. (line 51) * --subdir=STRING: Path searching options. (line 153) * --var-value=VARIABLE: Auxiliary tasks. (line 57) * --version: Standard options. (line 11) * --with-mktextex-default: mktex configuration. (line 12) * --without-mktexfmt-default: mktex configuration. (line 12) * --without-mktexmf-default: mktex configuration. (line 12) * --without-mktexocp-default: mktex configuration. (line 12) * --without-mktexofm-default: mktex configuration. (line 12) * --without-mktexpk-default: mktex configuration. (line 12) * --without-mktextfm-default: mktex configuration. (line 12) * -1 debugging value: Debugging. (line 23) * -A option to ls: ls-R. (line 33) * -D NUM: Path searching options. (line 17) * -L option to ls: ls-R. (line 38) * . directories, ignored: ls-R. (line 33) * . files: ls-R. (line 33) * .2602gf: Unable to generate fonts. (line 36) * .afm: Supported file formats. (line 22) * .base: Supported file formats. (line 26) * .bib: Supported file formats. (line 30) * .bltxml: Supported file formats. (line 34) * .bst: Supported file formats. (line 38) * .cid: Supported file formats. (line 68) * .cmap: Supported file formats. (line 46) * .cnf: Supported file formats. (line 49) * .dll: Supported file formats. (line 42) * .enc: Supported file formats. (line 61) * .eps: Supported file formats. (line 79) * .epsi: Supported file formats. (line 79) * .fea: Supported file formats. (line 71) * .fmt: Supported file formats. (line 64) * .ist: Supported file formats. (line 84) * .lig: Supported file formats. (line 88) * .map: Supported file formats. (line 94) * .mem: Supported file formats. (line 97) * .mf: Supported file formats. (line 105) * .mft: Supported file formats. (line 113) * .mlbib: Supported file formats. (line 121) * .mlbst: Supported file formats. (line 125) * .mp: Supported file formats. (line 129) * .ocp: Supported file formats. (line 137) * .ofm: Supported file formats. (line 141) * .opl: Supported file formats. (line 148) * .otp: Supported file formats. (line 151) * .ovf: Supported file formats. (line 154) * .ovp: Supported file formats. (line 157) * .pfa: Supported file formats. (line 211) * .pfb: Supported file formats. (line 211) * .pk: Supported file formats. (line 164) * .pool: Supported file formats. (line 109) * .pool <1>: Supported file formats. (line 133) * .pool <2>: Supported file formats. (line 195) * .pro: Supported file formats. (line 169) * .rhosts, writable by TeX: Security. (line 10) * .ris: Supported file formats. (line 173) * .sfd: Supported file formats. (line 177) * .so: Supported file formats. (line 42) * .tex: Supported file formats. (line 180) * .tex file, included in ls-R: ls-R. (line 33) * .tfm: Supported file formats. (line 199) * .ttc: Supported file formats. (line 207) * .ttf: Supported file formats. (line 207) * .vf: Supported file formats. (line 219) * .w: Supported file formats. (line 53) * .web: Supported file formats. (line 53) * .web <1>: Supported file formats. (line 223) * / may not be /: Searching overview. (line 13) * /, trailing in home directory: Tilde expansion. (line 19) * //: Subdirectory expansion. (line 6) * /etc/profile: Unable to find files. (line 14) * /etc/profile and aliases: ls-R. (line 21) * /var/tmp/texfonts: mktex configuration. (line 113) * 2602gf: Unable to generate fonts. (line 36) * 8.3 filenames, using: mktex configuration. (line 68) * : may not be :: Searching overview. (line 13) * :: expansion: Default expansion. (line 6) * \, line continuation in texmf.cnf: Config files. (line 37) * \openin: Searching overview. (line 31) * \special, suppressing warnings about: Suppressing warnings. (line 31) * { expansion: Brace expansion. (line 6) * ~ expansion: Tilde expansion. (line 6) * absolute filenames: Searching overview. (line 52) * access warnings: Searching overview. (line 56) * AFMFONTS: Supported file formats. (line 22) * aliases for fonts: Fontmap. (line 6) * aliases, for filenames: Filename aliases. (line 6) * all: Suppressing warnings. (line 13) * all matches, finding: Path searching options. (line 12) * alphabetical order, not: Subdirectory expansion. (line 6) * announcement mailing list: Mailing lists. (line 6) * API, re-entrant: Programming overview. (line 16) * append-only directories and mktexpk: Security. (line 36) * appendonlydir: mktex configuration. (line 60) * arguments to mktex: mktex script arguments. (line 6) * argv[0]: Calling sequence. (line 14) * autoconf, recommended: Calling sequence. (line 117) * automounter, and ls-R: ls-R. (line 40) * auxiliary tasks: Auxiliary tasks. (line 6) * Bach, Johann Sebastian: Default expansion. (line 41) * backslash-newline: Config files. (line 37) * basic glyph lookup: Basic glyph lookup. (line 6) * Berry, Karl: History. (line 12) * BIBINPUTS: Supported file formats. (line 30) * BIBINPUTS <1>: Supported file formats. (line 121) * blank lines, in texmf.cnf: Config files. (line 35) * BLTXMLINPUTS: Supported file formats. (line 34) * brace expansion: Brace expansion. (line 6) * Breitenlohner, Peter: History. (line 78) * BSTINPUTS: Supported file formats. (line 38) * BSTINPUTS <1>: Supported file formats. (line 125) * bug address: Reporting bugs. (line 6) * bug checklist: Bug checklist. (line 6) * bug mailing list: Mailing lists. (line 6) * bugs, reporting: Reporting bugs. (line 6) * c-*.h: Calling sequence. (line 117) * c-auto.h: Programming overview. (line 33) * cache of fonts, local: Security. (line 22) * calling sequence: Calling sequence. (line 6) * ChangeLog entry: Bug checklist. (line 52) * checklist for bug reports: Bug checklist. (line 6) * checksum: Suppressing warnings. (line 16) * circle fonts: Fontmap. (line 19) * client_path in kpse->format_info: Calling sequence. (line 47) * CLUAINPUTS: Supported file formats. (line 42) * CMAPFONTS: Supported file formats. (line 46) * cmr10, as fallback font: Fallback font. (line 15) * cmr10.vf: Searching overview. (line 31) * cnf.c: Config files. (line 86) * cnf.h: Programming with config files. (line 23) * comments, in fontmap files: Fontmap. (line 27) * comments, in texmf.cnf: Config files. (line 27) * comments, making: Introduction. (line 28) * common features in glyph lookup: Basic glyph lookup. (line 6) * common problems: Common problems. (line 6) * compilation value, source for path: Path sources. (line 20) * compiler bugs: TeX or Metafont failing. (line 6) * compiler bugs, finding: TeX or Metafont failing. (line 24) * conditions for use: Introduction. (line 31) * config files: Config files. (line 6) * config files, for Kpathsea-using programs: Calling sequence. (line 47) * config files, programming with: Programming with config files. (line 6) * config.h: Programming overview. (line 33) * config.log: Bug checklist. (line 24) * config.ps: Specially-recognized files. (line 16) * config.ps, search path for: Supported file formats. (line 57) * config.status: Bug checklist. (line 27) * configuration bugs: Bug checklist. (line 27) * configuration file, source for path: Path sources. (line 17) * configuration files as shell scripts.: Config files. (line 79) * configuration of mktex scripts: mktex configuration. (line 6) * configure options for mktex scripts: mktex configuration. (line 12) * context diff: Bug checklist. (line 52) * continuation character: Config files. (line 37) * core dumps, reporting: Bug checklist. (line 58) * crashes, reporting: Bug checklist. (line 58) * CWEBINPUTS: Supported file formats. (line 53) * database search: Searching overview. (line 17) * database, for filenames: Filename database. (line 6) * database, format of: Database format. (line 6) * debug.h: Debugging. (line 6) * debugger: Bug checklist. (line 58) * debugging: Debugging. (line 6) * debugging options, in Kpathsea-using program: Calling sequence. (line 39) * debugging output: Debugging. (line 27) * default expansion: Default expansion. (line 6) * default_texsizes: Fallback font. (line 6) * device, wrong: Unable to generate fonts. (line 29) * directories, making append-only: mktex configuration. (line 61) * directory permissions: Security. (line 51) * directory structure, for TeX files: TeX directory structure. (line 6) * disabling mktex scripts: mktex configuration. (line 6) * disk search: Searching overview. (line 22) * disk searching, avoiding: ls-R. (line 51) * disk usage, reducing: Logging. (line 6) * doc files: Supported file formats. (line 185) * DOS compatible names: mktex configuration. (line 68) * dosnames: mktex configuration. (line 67) * dot files: ls-R. (line 33) * doubled colons: Default expansion. (line 6) * dpiNNN directories: mktex configuration. (line 68) * DVILJMAKEPK: mktex script names. (line 32) * DVILJSIZES: Fallback font. (line 6) * dvipdfmx.cfg: Specially-recognized files. (line 19) * DVIPSFONTS: Supported file formats. (line 254) * DVIPSHEADERS: Supported file formats. (line 211) * DVIPSMAKEPK: mktex script names. (line 32) * DVIPSSIZES: Fallback font. (line 6) * dynamic creation of files: mktex scripts. (line 6) * EC fonts, and dynamic source creation: mktex scripts. (line 6) * elt-dirs.c: Subdirectory expansion. (line 41) * elt-dirs.c <1>: Subdirectory expansion. (line 48) * enabling mktex scripts: mktex configuration. (line 6) * ENCFONTS: Supported file formats. (line 61) * engine name: Path searching options. (line 21) * environment variable, source for path: Path sources. (line 9) * environment variables for TeX: Supported file formats. (line 6) * environment variables in paths: Variable expansion. (line 6) * environment variables, old: Unable to find files. (line 14) * epoch, seconds since: Logging. (line 15) * error message macros: Calling sequence. (line 22) * excessive startup time: Slow path searching. (line 6) * expand.c: Brace expansion. (line 26) * expanding symlinks: Calling sequence. (line 31) * expansion, default: Default expansion. (line 6) * expansion, path element: Searching overview. (line 43) * expansion, search path: Path expansion. (line 6) * expansion, subdirectory: Subdirectory expansion. (line 6) * expansion, tilde: Tilde expansion. (line 6) * expansion, variable: Variable expansion. (line 6) * explicitly relative filenames: Searching overview. (line 52) * extensions, filename: File lookup. (line 24) * externally-built filename database: Filename database. (line 6) * extra colons: Default expansion. (line 6) * failed mktex... script invocation: mktex script names. (line 35) * fallback font: Fallback font. (line 6) * fallback resolutions: Fallback font. (line 6) * FAQ, Kpathsea: Common problems. (line 6) * Farwell, Matthew: Subdirectory expansion. (line 22) * file formats, supported: Supported file formats. (line 6) * file lookup: File lookup. (line 6) * file permissions: Security. (line 47) * file types, registering new: Programming overview. (line 39) * filename aliases: Filename aliases. (line 6) * filename database: Filename database. (line 6) * filenames, absolute or explicitly relative: Searching overview. (line 52) * files, unable to find: Unable to find files. (line 6) * filesystem search: Searching overview. (line 22) * floating directories: Searching overview. (line 22) * fmtutil: mktex script names. (line 10) * fmtutil.cnf: Specially-recognized files. (line 22) * fmtutils.cnf: mktex configuration. (line 24) * font alias files: Fontmap. (line 6) * font generation failures: Unable to generate fonts. (line 6) * font of last resort: Fallback font. (line 6) * font set, infinite: mktex scripts. (line 6) * FONTCIDMAPS: Supported file formats. (line 68) * FONTFEATURES: Supported file formats. (line 71) * fontmap files: Fontmap. (line 6) * fontmaps: mktex configuration. (line 86) * fontmaps <1>: mktex configuration. (line 87) * fontname: mktex configuration. (line 87) * fontnames, arbitrary length: Fontmap. (line 15) * FOOINPUTS: Supported file formats. (line 236) * FOOINPUTS <1>: Supported file formats. (line 239) * fopen, redefined: Debugging. (line 54) * format of external database: Database format. (line 6) * ftp.cs.stanford.edu: unixtex.ftp. (line 20) * ftp.tug.org: unixtex.ftp. (line 6) * fundamental purpose of Kpathsea: Introduction. (line 6) * gdb, recommended: Bug checklist. (line 58) * gf: Supported file formats. (line 75) * GFFONTS: Supported file formats. (line 75) * globally writable directories: Security. (line 30) * glyph lookup: Glyph lookup. (line 6) * glyph lookup bitmap tolerance: Basic glyph lookup. (line 15) * GLYPHFONTS: Supported file formats. (line 75) * GLYPHFONTS <1>: Supported file formats. (line 164) * glyphlist.txt: Specially-recognized files. (line 25) * GNU C compiler bugs: TeX or Metafont failing. (line 19) * GNU General Public License: Introduction. (line 31) * group-writable directories: Security. (line 40) * GSFTOPK_DEBUG (128): Debugging. (line 88) * hash table buckets, printing: Debugging. (line 105) * hash table routines: Calling sequence. (line 110) * hash_summary_only variable for debugging: Debugging. (line 105) * history of Kpathsea: History. (line 6) * Hoekwater, Taco: History. (line 78) * home directories in paths: Tilde expansion. (line 6) * HOME, as ~ expansion: Tilde expansion. (line 6) * identifiers, characters valid in: Config files. (line 47) * include fontmap directive: Fontmap. (line 30) * INDEXSTYLE: Supported file formats. (line 84) * input lines, reading: Calling sequence. (line 110) * interactive query: Path searching options. (line 119) * interface, not frozen: Introduction. (line 28) * introduction: Introduction. (line 6) * kdebug:: Debugging. (line 105) * kdefault.c: Default expansion. (line 48) * Knuth, Donald E.: History. (line 6) * Knuth, Donald E., archive of programs by: unixtex.ftp. (line 20) * Kpathsea config file, source for path: Path sources. (line 17) * kpathsea.h: Programming overview. (line 24) * kpathsea_cnf_get: Programming with config files. (line 23) * KPATHSEA_DEBUG: Calling sequence. (line 28) * KPATHSEA_DEBUG <1>: Debugging. (line 18) * kpathsea_find_file: File lookup. (line 38) * kpathsea_find_file <1>: Calling sequence. (line 62) * kpathsea_find_glyph: Glyph lookup. (line 26) * kpathsea_finish: Calling sequence. (line 106) * kpathsea_init_prog: Fallback font. (line 15) * kpathsea_init_prog <1>: Calling sequence. (line 53) * kpathsea_in_name_ok: Calling sequence. (line 101) * kpathsea_new: Calling sequence. (line 9) * kpathsea_open_file: Calling sequence. (line 74) * kpathsea_out_name_ok: Calling sequence. (line 82) * kpathsea_set_program_name: Calling sequence. (line 14) * kpathsea_var_value: Programming with config files. (line 10) * KPATHSEA_WARNING: Config files. (line 18) * kpse->debug: Debugging. (line 6) * kpse->debug <1>: Debugging. (line 18) * kpse->debug variable: Calling sequence. (line 39) * kpse->format_info: Calling sequence. (line 47) * kpse->invocation_name: Calling sequence. (line 22) * kpse->invocation_short_name: Calling sequence. (line 22) * kpse->program_name: Calling sequence. (line 22) * kpsewhich: Invoking kpsewhich. (line 6) * Kpsewhich, and debugging: Debugging. (line 31) * KPSE_BITMAP_TOLERANCE: Basic glyph lookup. (line 15) * KPSE_DEBUG_EXPAND (16): Debugging. (line 68) * KPSE_DEBUG_FOPEN (4): Debugging. (line 53) * KPSE_DEBUG_HASH (2): Debugging. (line 46) * KPSE_DEBUG_PATHS (8): Debugging. (line 60) * KPSE_DEBUG_SEARCH (32): Debugging. (line 74) * KPSE_DEBUG_STAT (1): Debugging. (line 38) * KPSE_DEBUG_VARS (64): Debugging. (line 83) * KPSE_DOT expansion: KPSE_DOT expansion. (line 6) * kpse_format_info_type: Debugging. (line 61) * last-resort font: Fallback font. (line 6) * lcircle10: Fontmap. (line 19) * leading colons: Default expansion. (line 6) * leaf directories wrongly guessed: Unable to find files. (line 21) * leaf directory trick: Subdirectory expansion. (line 22) * license for using the library: Introduction. (line 31) * LIGFONTS: Supported file formats. (line 88) * lines, reading arbitrary-length: Calling sequence. (line 110) * Linux File System Standard: mktex configuration. (line 113) * local cache of fonts: Security. (line 22) * log file: Logging. (line 6) * logging successful searches: Logging. (line 6) * lost+found directory: Searching overview. (line 56) * lostchar: Suppressing warnings. (line 19) * ls-R: Supported file formats. (line 91) * ls-R database file: ls-R. (line 6) * ls-R, simplest build: ls-R. (line 18) * MacKenzie, David: History. (line 44) * MacKenzie, David <1>: Subdirectory expansion. (line 22) * magic characters: Searching overview. (line 13) * mailing lists: Mailing lists. (line 6) * MAKETEX_DEBUG (512): Debugging. (line 91) * MAKETEX_FINE_DEBUG (1024): Debugging. (line 100) * memory allocation routines: Calling sequence. (line 110) * metafont driver files: mktex configuration. (line 93) * Metafont failures: TeX or Metafont failing. (line 6) * Metafont installation: Unable to generate fonts. (line 51) * Metafont making too-large fonts: Unable to generate fonts. (line 36) * Metafont using the wrong device: Unable to generate fonts. (line 29) * MFBASES: Supported file formats. (line 26) * MFINPUTS: Supported file formats. (line 105) * MFPOOL: Supported file formats. (line 109) * MFTINPUTS: Supported file formats. (line 113) * MISCFONTS: Supported file formats. (line 117) * mismatched checksum warnings: Suppressing warnings. (line 17) * missfont.log: mktex script names. (line 35) * MISSFONT_LOG: mktex script names. (line 40) * missing character warnings: Suppressing warnings. (line 20) * mkocp: mktex script names. (line 18) * mkofm: mktex script names. (line 21) * mktex script configuration: mktex configuration. (line 6) * mktex script names: mktex script names. (line 6) * mktex scripts: mktex scripts. (line 6) * mktex.cnf: Specially-recognized files. (line 28) * mktex.cnf <1>: mktex configuration. (line 29) * mktex.opt: mktex configuration. (line 29) * mktex.opt <1>: mktex configuration. (line 39) * mktexdir: mktex configuration. (line 61) * mktexfmt: mktex script names. (line 10) * mktexmf: mktex script names. (line 15) * mktexpk: mktex script names. (line 24) * mktexpk can't guess mode: Unable to generate fonts. (line 12) * mktextex: mktex script names. (line 27) * mktextfm: mktex script names. (line 30) * MLBIBINPUTS: Supported file formats. (line 121) * MLBSTINPUTS: Supported file formats. (line 125) * mode directory, omitting: mktex configuration. (line 98) * Morgan, Tim: History. (line 12) * MPINPUTS: Supported file formats. (line 129) * MPMEMS: Supported file formats. (line 97) * MPPOOL: Supported file formats. (line 133) * MPSUPPORT: Supported file formats. (line 101) * MT_FEATURES: mktex configuration. (line 39) * multiple TeX hierarchies: Brace expansion. (line 20) * must exist: Searching overview. (line 31) * names for mktex scripts: mktex script names. (line 6) * Neumann, Gustaf: History. (line 56) * NFS and ls-R: ls-R. (line 40) * nomfdrivers: mktex configuration. (line 92) * nomode: mktex configuration. (line 97) * none: Suppressing warnings. (line 23) * null pointers, dereferencing: Bug checklist. (line 58) * numeric debugging values: Debugging. (line 34) * obtaining TeX: unixtex.ftp. (line 6) * OCPINPUTS: Supported file formats. (line 137) * OFMFONTS: Supported file formats. (line 141) * online Metafont display, spurious: Unable to generate fonts. (line 36) * OPENTYPEFONTS: Supported file formats. (line 145) * optimization caveat: TeX or Metafont failing. (line 15) * options for debugging: Debugging. (line 6) * OTPINPUTS: Supported file formats. (line 151) * overview of path searching: Searching overview. (line 6) * overview of programming with Kpathsea: Programming overview. (line 6) * OVFFONTS: Supported file formats. (line 154) * OVPFONTS: Supported file formats. (line 157) * path expansion: Path expansion. (line 6) * path searching: Path searching. (line 6) * path searching options: Path searching options. (line 6) * path searching, overview: Searching overview. (line 6) * path searching, standalone: Invoking kpsewhich. (line 6) * path sources: Path sources. (line 6) * pathsearch.h: Programming overview. (line 24) * pc Pascal compiler: History. (line 12) * pdfglyphlist.txt: Specially-recognized files. (line 31) * pdftex.cfg: Specially-recognized files. (line 34) * PDFTEXCONFIG: Supported file formats. (line 161) * pdftexconfig.tex: Specially-recognized files. (line 34) * permission denied: Searching overview. (line 56) * permissions, directory: Security. (line 51) * permissions, file: Security. (line 47) * PKFONTS: Supported file formats. (line 164) * plain.base: Unable to generate fonts. (line 46) * privacy, semblance of: Logging. (line 32) * problems, common: Common problems. (line 6) * proginit.h: Calling sequence. (line 53) * program-varying paths: Supported file formats. (line 12) * programming overview: Programming overview. (line 6) * programming with config files: Programming with config files. (line 6) * programming with Kpathsea: Calling sequence. (line 6) * programs using the library: Introduction. (line 13) * proof mode: Unable to generate fonts. (line 36) * PSHEADERS: Supported file formats. (line 169) * pxp Pascal preprocessor: History. (line 12) * quoting variable values: Variable expansion. (line 17) * re-entrant API: Programming overview. (line 16) * readable: Suppressing warnings. (line 26) * reading arbitrary-length lines: Calling sequence. (line 110) * recording successful searches: Logging. (line 6) * relative filenames: Searching overview. (line 52) * reporting bugs: Reporting bugs. (line 6) * resident.c: Calling sequence. (line 47) * resolution, setting: Path searching options. (line 17) * resolutions, last-resort: Fallback font. (line 6) * retrieving TeX: unixtex.ftp. (line 6) * right-hand side of variable assignments: Config files. (line 56) * RISINPUTS: Supported file formats. (line 173) * Rokicki, Tom: History. (line 12) * root user: Tilde expansion. (line 19) * runtime configuration files: Config files. (line 6) * runtime debugging: Debugging. (line 6) * Sauter fonts, and dynamic source creation: mktex scripts. (line 6) * scripts for file creation: mktex scripts. (line 6) * search path, defined: Searching overview. (line 6) * searching for files: File lookup. (line 6) * searching for glyphs: Glyph lookup. (line 6) * searching overview: Searching overview. (line 6) * searching the database: Searching overview. (line 17) * searching the disk: Searching overview. (line 22) * security considerations: Security. (line 6) * SELFAUTODIR: Calling sequence. (line 31) * SELFAUTOLOC: Calling sequence. (line 31) * SELFAUTOPARENT: Calling sequence. (line 31) * sending patches: Bug checklist. (line 52) * setgid scripts: Security. (line 40) * SFDFONTS: Supported file formats. (line 177) * shell scripts as configuration files: Config files. (line 79) * shell variables: Variable expansion. (line 17) * shell_escape, example for code: Programming with config files. (line 10) * site overrides for mktex...: mktex configuration. (line 29) * skeleton TeX directory: TeX directory structure. (line 6) * slow startup time: Slow path searching. (line 6) * source files: Supported file formats. (line 188) * sources for search paths: Path sources. (line 6) * special: Suppressing warnings. (line 30) * stack trace: Bug checklist. (line 58) * standalone path searching: Invoking kpsewhich. (line 6) * standard error and debugging output: Debugging. (line 27) * standard options: Standard options. (line 6) * startup time, excessive: Slow path searching. (line 6) * string routines: Calling sequence. (line 110) * strip: mktex configuration. (line 107) * stripsupplier: mktex configuration. (line 101) * striptypeface: mktex configuration. (line 104) * st_nlink: Subdirectory expansion. (line 26) * ST_NLINK_TRICK: Subdirectory expansion. (line 38) * subdirectory searching: Subdirectory expansion. (line 6) * suffixes, filename: File lookup. (line 24) * suggestions, making: Introduction. (line 28) * Sun 2: History. (line 12) * supplier directory, omitting: mktex configuration. (line 102) * supplier directory, omitting <1>: mktex configuration. (line 108) * supported file formats: Supported file formats. (line 6) * suppressing warnings: Suppressing warnings. (line 6) * symbolic links not found: Unable to find files. (line 21) * symbolic links, and ls-R: ls-R. (line 38) * symlinks, resolving: Calling sequence. (line 31) * system C compiler bugs: TeX or Metafont failing. (line 19) * T1FONTS: Supported file formats. (line 211) * T1INPUTS: Supported file formats. (line 211) * T42FONTS: Supported file formats. (line 216) * tcfmgr.map: Specially-recognized files. (line 46) * TDS: TeX directory structure. (line 6) * TeX directory structure: TeX directory structure. (line 6) * TeX environment variables: Supported file formats. (line 6) * TeX failures: TeX or Metafont failing. (line 6) * TeX file lookup: File lookup. (line 6) * TeX glyph lookup: Glyph lookup. (line 6) * TeX support: TeX support. (line 6) * TeX Users Group: Introduction. (line 40) * tex-file.c: File lookup. (line 38) * tex-file.h: Programming overview. (line 24) * tex-glyph.c: Glyph lookup. (line 26) * tex-glyph.h: Programming overview. (line 24) * tex-k@tug.org: Mailing lists. (line 6) * tex-k@tug.org (bug address): Reporting bugs. (line 6) * tex.web: unixtex.ftp. (line 20) * TEXBIB: Supported file formats. (line 30) * TEXBIB <1>: Supported file formats. (line 121) * TEXCONFIG: Supported file formats. (line 57) * TEXDOCS: Supported file formats. (line 185) * TEXFONTMAPS: Supported file formats. (line 94) * TEXFONTS: Supported file formats. (line 75) * TEXFONTS <1>: Supported file formats. (line 164) * TEXFONTS <2>: Supported file formats. (line 199) * TEXFONTS <3>: Supported file formats. (line 219) * texfonts.map: Fontmap. (line 6) * TEXFORMATS: Supported file formats. (line 64) * TEXINDEXSTYLE: Supported file formats. (line 84) * TEXINPUTS: Supported file formats. (line 79) * TEXINPUTS <1>: Supported file formats. (line 180) * TEXMF: TeX directory structure. (line 6) * texmf.cnf: Specially-recognized files. (line 38) * texmf.cnf missing, warning about: Config files. (line 18) * texmf.cnf, and variable expansion: Variable expansion. (line 6) * texmf.cnf, definition for: Config files. (line 6) * texmf.cnf, source for path: Path sources. (line 17) * TEXMFCNF: Config files. (line 6) * TEXMFCNF <1>: Supported file formats. (line 49) * TEXMFDBS: ls-R. (line 6) * TEXMFDBS <1>: Supported file formats. (line 91) * TEXMFINI: Supported file formats. (line 26) * TEXMFINI <1>: Supported file formats. (line 64) * TEXMFINI <2>: Supported file formats. (line 97) * TEXMFLOG: Logging. (line 10) * TEXMFOUTPUT: mktex script names. (line 40) * TEXMFSCRIPTS: Supported file formats. (line 191) * texmfvar: mktex configuration. (line 122) * TEXMFVAR: mktex configuration. (line 123) * TEXPICTS: Supported file formats. (line 79) * TEXPKS: Supported file formats. (line 164) * TEXPOOL: Supported file formats. (line 195) * TEXPSHEADERS: Supported file formats. (line 169) * TEXPSHEADERS <1>: Supported file formats. (line 211) * TEXSIZES: Fallback font. (line 6) * TEXSOURCES: Supported file formats. (line 188) * TEX_HUSH: Searching overview. (line 56) * TEX_HUSH <1>: Suppressing warnings. (line 6) * TFMFONTS: Supported file formats. (line 199) * tilde expansion: Tilde expansion. (line 6) * tilde.c: Tilde expansion. (line 25) * time system call: Logging. (line 15) * tolerance for glyph lookup: Basic glyph lookup. (line 15) * trailing / in home directory: Tilde expansion. (line 19) * trailing colons: Default expansion. (line 6) * TRFONTS: Supported file formats. (line 203) * trick for detecting leaf directories: Subdirectory expansion. (line 22) * trojan horse attack: Security. (line 10) * try_std_extension_first: File lookup. (line 24) * TTFONTS: Supported file formats. (line 207) * tug.org: unixtex.ftp. (line 6) * typeface directory, omitting: mktex configuration. (line 105) * typeface directory, omitting <1>: mktex configuration. (line 108) * unable to find files: Unable to find files. (line 6) * unable to generate fonts: Unable to generate fonts. (line 6) * uname: Bug checklist. (line 20) * unixtex.ftp: unixtex.ftp. (line 6) * unknown special warnings: Suppressing warnings. (line 31) * unreadable file warnings: Suppressing warnings. (line 27) * unreadable files: Searching overview. (line 56) * unusable ls-R warning: ls-R. (line 45) * usage patterns, finding: Logging. (line 6) * USERPROFILE, as ~ expansion: Tilde expansion. (line 6) * USE_TEXMFVAR: mktex configuration. (line 128) * USE_VARTEXFONTS: mktex configuration. (line 118) * varfonts: mktex configuration. (line 112) * variable expansion: Variable expansion. (line 6) * variable.c: Variable expansion. (line 32) * variable.h: Programming with config files. (line 10) * VARTEXFONTS: mktex configuration. (line 113) * VAX 11/750: History. (line 12) * version numbers, determining: Bug checklist. (line 15) * VF files, not found: Searching overview. (line 31) * VFFONTS: Supported file formats. (line 219) * Vojta, Paul: History. (line 30) * Walsh, Norman: History. (line 56) * warning about unusable ls-R: ls-R. (line 45) * warning, about missing texmf.cnf: Config files. (line 18) * warnings, file access: Searching overview. (line 56) * warnings, suppressing: Suppressing warnings. (line 6) * WEB2C: Supported file formats. (line 227) * Weber, Olaf: History. (line 73) * WEBINPUTS: Supported file formats. (line 223) * whitespace, in fontmap files: Fontmap. (line 27) * whitespace, not ignored on continuation lines: Config files. (line 37) * www.tug.org: unixtex.ftp. (line 6) * XDvi: Specially-recognized files. (line 41) * XDVIFONTS: Supported file formats. (line 254) * XDVIMAKEPK: mktex script names. (line 32) * XDVISIZES: Fallback font. (line 6) * zuhn, david: History. (line 50)  Tag Table: Node: Top1480 Node: Introduction2260 Node: History4206 Node: unixtex.ftp8803 Node: Security10298 Node: TeX directory structure12802 Node: Path searching16850 Node: Searching overview17508 Node: Path sources20903 Node: Config files21961 Node: Path expansion25888 Node: Default expansion26837 Node: Variable expansion28907 Node: Tilde expansion30308 Node: Brace expansion31288 Node: KPSE_DOT expansion32213 Node: Subdirectory expansion32726 Node: Filename database35080 Node: ls-R36134 Node: Filename aliases39029 Node: Database format40207 Node: Invoking kpsewhich41220 Node: Path searching options42175 Node: Specially-recognized files50095 Node: Auxiliary tasks51450 Node: Standard options53789 Node: TeX support54145 Node: Supported file formats55497 Node: File lookup63162 Node: Glyph lookup64911 Node: Basic glyph lookup66035 Node: Fontmap66915 Node: Fallback font69336 Node: Suppressing warnings70248 Node: mktex scripts71375 Node: mktex configuration72590 Node: mktex script names78393 Node: mktex script arguments79779 Node: Programming80658 Node: Programming overview81180 Node: Calling sequence83877 Node: Program-specific files90409 Node: Programming with config files91432 Node: Reporting bugs92744 Node: Bug checklist93422 Node: Mailing lists96894 Node: Debugging97569 Node: Logging102646 Node: Common problems104513 Node: Unable to find files104990 Node: Slow path searching107400 Node: Unable to generate fonts108775 Node: TeX or Metafont failing111246 Node: Index112599  End Tag Table