\documentclass[12pt]{article}
\listfiles
\usepackage{filecontents}
\begin{filecontents*}{demo0.dat}
    0.1414    0.0052
    0.2828    0.0217
    0.4243    0.0480
    0.5657    0.0890
    0.7071    0.1375
    0.8485    0.1906
    0.9899    0.2663
    1.1314    0.3580
    1.2728    0.4644
    1.4142    0.5801
    1.5556    0.7033
    1.6971    0.8899
    1.8385    1.1143
    1.9799    1.2593
    2.1213    1.5692
    2.2627    3.2331
    2.4042    4.4097
    2.5456    5.8186
    2.6870    7.4441
    2.8284    8.2287
\end{filecontents*}

\begin{filecontents*}{demo1.dat}
1 99447169
2 110351058
3 123557238
4 138346129
5 145050826
6 160363212
7 174000394
8 183856559
9 189128691
10 197634845
11 213257357
12 216899512
13 230152738
14 224144907
15 247410024
16 261168438
17 252920343
18 326153799
19 319442110
20 310351522
21 381919943
22 438043888
23 357527766
24 603304997
\end{filecontents*}

\begin{filecontents*}{demo2.dat}
  1989 3.08
  1990 3.84
  1991 4.08
  1992 3.21
  1993 5.23
  1994 2.97
  1995 2.53
  1996 2.8
  1997 2.78
  1998 3.15
  1999 2.32
  2000 2.4
  2001 2.46
\end{filecontents*}
\begin{filecontents*}{demo3.dat}
  1989 3.08
  1990 3.1
  1991 3.08
  1992 3.21
  1993 5.0
  1994 2.27
  1995 3.53
  1996 3.8
  1997 2.8
  1998 4.15
  1999 3.32
  2000 1.4
  2001 2.46
\end{filecontents*}


\usepackage[T1]{fontenc}
\usepackage[latin1]{inputenc}
\usepackage{pamathx}
\usepackage[scaled]{luximono}
%\usepackage{mathptmx}
\usepackage[lmargin=2.5cm,bmargin=3cm]{geometry}
\usepackage{tabularx}
\usepackage{graphicx}
\usepackage[svgnames,dvipsnames]{pstricks}
\usepackage{framed,xspace,multirow,caption}
\usepackage{pst-eucl}
\usepackage{pstricks-add}
\let\pstricksaddFV\fileversion
\def\PST{\texttt{PSTricks}}
\newcommand*\PostScript{\textsf{PostScript}\xspace}
%
%
\usepackage{longtable}
\usepackage{pifont}
\def\textat{\protect\makeatletter\texttt{@}\protect\makeatother}
\makeatletter
\renewcommand*\l@section{\@dottedtocline{1}{1.5em}{2.5em}}
\renewcommand*\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}}
\renewcommand*\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}}
\renewcommand*\l@paragraph{\@dottedtocline{4}{10em}{5em}}
\renewcommand*\l@subparagraph{\@dottedtocline{5}{12em}{6em}}
\makeatother
\let\psEllipticArc\psellipticarc
\let\psEllipticArcN\psellipticarcn
\let\psWedgeEllipse\psellipticwedge
%\parindent=0pt
\newcommand\verbI[1]{{\small\texttt{#1}}}
\newcommand\CMD[1]{{\texttt{\textbackslash#1}}}
\let\param\texttt
%
\newcommand{\pstEllipse}[5][]{%
  \psset{#1}
  \parametricplot{#4}{#5}{#2\space t cos mul #3\space t sin mul}%
}
%
\newcommand{\pstEllipseWedge}[5][]{%
  \psset{#1}
  \pscustom{%
    \parametricplot{#4}{#5}{#2\space t cos mul #3\space t sin mul}%
    \psline(! #2\space #5\space cos mul #3\space #5\space sin mul)%
       (0,0)%
       (! #2\space #4\space cos mul #3\space #4\space sin mul)%
  }%
}
%
\psset{subgriddiv=0,griddots=5,gridlabels=7pt}
%
\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}}
\def\PS{PostScript}
%
%\renewcommand{\ttdefault}{ul9}% Luxi Mono

\parindent=0pt
\parskip=1ex plus 5pt

\usepackage[colorlinks,linktocpage]{hyperref}
\makeatletter
\def\verbatim@font{\small\normalfont\ttfamily}
\makeatother
\usepackage{showexpl}
\lstset{preset=\raggedright}
\usepackage{amsmath}

\newdimen\fullWidth 
\makeatletter
\renewcommand\ON{%
  \gdef\lst@alloverstyle##1{%
    \fboxrule=0pt
    \fboxsep=0pt
    \fcolorbox{DarkBlue}{DarkBlue}{\textcolor{white}{\bfseries\strut##1}}%
}}
\renewcommand\OFF{%
  \xdef\lst@alloverstyle##1{##1}%
}

\makeatother
\lstset{escapechar=§}


\begin{document}
\fullWidth=\linewidth
\advance\fullWidth by \marginparsep
\advance\fullWidth by \marginparwidth

\title{\texttt{pstricks-add}\\additionals Macros for \texttt{pstricks}%
%\thanks{%
%    This document was written with \texttt{Kile: 1.7 (Qt: 3.1.1; KDE: 3.3;}
%    \url{http://sourceforge.net/projects/kile/}) and the PDF output
%    was build with VTeX/Free (\url{http://www.micropress-inc.com/linux})}
\\
    \small v.\pstricksaddFV}
\author{Dominique Rodriguez and Herbert Vo\ss}
\date{\today}

\maketitle

\begin{abstract}
This version of \verb+pstricks-add+ needs \verb+pstricks.tex+ version >1.04 from June 2004,
otherwise the additional macros may not work as espected. The ellipsis
material and the option \verb+asolid+ (renamed to \verb+eofill+) are 
\index{fillstyle!eofill@\texttt{eofill}}
now part of the new \verb+pstricks.tex+ package, available at CTAN or at
\url{http://perce.de/LaTeX/}. \verb+pstricks-add+ will for ever be an experimental and
dynamical package, try it at your own risk.
 
\begin{itemize}
\item It is important to load \verb+pstricks-add+ as \textbf{last} PSTricks related package, otherwise
a lot of the macros won't work in the expected way. 
\item \verb+pstricks-add+ uses the extended version of the keyval package. So be sure, that
you have installed \verb+pst-xkey+ which is part of the \verb+xkeyval+-package and that all
packages, that uses the old keyval interface are loaded \textbf{before} the \verb+xkeyval+.\cite{xkeyval}
\item the option \verb+tickstyle+ from \verb+pst-plot+ is no more supported, use \verb+ticksize+ instead.
\item the option \verb+xyLabel+ is no more supported, use the option \verb+labelFontSize+ instead.
\end{itemize}

\end{abstract}

\clearpage
\tableofcontents

\clearpage
%--------------------------------------------------------------------------------------
\part{\texttt{pstricks}}
%--------------------------------------------------------------------------------------

%--------------------------------------------------------------------------------------
\section{Numeric functions}
%--------------------------------------------------------------------------------------

All macronames contain a \textat{} in their name, because they are only for internal use,
but it is no problem to use it as the other macros. One can define another name without 
a \textat{}:
\begin{verbatim}
\makeatletter
\let\pstdivide\pst@divide
\makeatother
\end{verbatim}

or put the macro inside of the \verb+\makeatletter+ -- \verb+\makeatother+ sequence.

%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}divide}}
%--------------------------------------------------------------------------------------

\verb+pstricks+ itself has its own divide macro, called \verb+\pst@divide+ which 
can divide two lengthes and saves the quotient as a floating point number:
\index{Division}
%
\begin{verbatim}
\pst@divide{<dividend>}{<divisor>}{<result as a macro>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\makeatletter
\pst@divide{34pt}{6pt}\quotient \quotient\\
\pst@divide{-6pt}{34pt}\quotient \quotient
\makeatother
\end{LTXexample}

\noindent this gives the output $5.66666$. The result is not a length!

%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}mod}}
%--------------------------------------------------------------------------------------
\verb+pstricks-add+ defines an additional numeric function for the modulus:
\index{Modulus}

\begin{verbatim}
\pst@mod{<integer>}{<integer>}{<result as a macro>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\makeatletter
\pst@mod{34}{6}\modulo \modulo\\
\pst@mod{25}{-6}\modulo \modulo
\makeatother
\end{LTXexample}

\noindent this gives the output $4$. Using this internal numeric functions in documents
requires a setting inside the \verb+makeatletter+ and \verb+makeatother+ environment.
It makes some sense to define a new macroname in the preamble to use it throughou, e.g.
\verb+\let\modulo\pst@mod+.

%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}max}}
%--------------------------------------------------------------------------------------

\begin{verbatim}
\pst@max{<integer>}{<integer>}{<result as count register>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\newcount\maxNo
\makeatletter
\pst@max{-34}{-6}\maxNo \the\maxNo\\
\pst@max{0}{11}\maxNo \the\maxNo
\makeatother
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}maxdim}}
%--------------------------------------------------------------------------------------

\begin{verbatim}
\pst@maxdim{<dimension>}{<dimension>}{<result as dimension register>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\newdimen\maxDim
\makeatletter
\pst@maxdim{34cm}{1234pt}\maxDim \the\maxDim\\
\pst@maxdim{34cm}{123pt}\maxDim \the\maxDim
\makeatother
\end{LTXexample}

%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}abs}}
%--------------------------------------------------------------------------------------

\begin{verbatim}
\pst@abs{<integer>}{<result as a count register>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\newcount\absNo
\makeatletter
\pst@abs{-34}\absNo \the\absNo\\
\pst@abs{4}\absNo \the\absNo
\makeatother
\end{LTXexample}

%--------------------------------------------------------------------------------------
\subsection{\CMD{pst\textat{}absdim}}
%--------------------------------------------------------------------------------------

\begin{verbatim}
\pst@absdim{<dimension>}{<result as a dimension register>}
\end{verbatim}

\begin{LTXexample}[width=2cm]
\newdimen\absDim
\makeatletter
\pst@absdim{-34cm}\absDim \the\absDim\\
\pst@absdim{4sp}\absDim \the\absDim
\makeatother
\end{LTXexample}
%
\subsection{Reading angle values}
By default \PST\ checks the input value of angles. With the optional argument 
\verb+angleCheck+ this internal check can be disabled. Then \PST\ passes the 
input straight to \PS\ and it is possible to do some calculating by using
\PS\ code. 

\begin{LTXexample}[width=4cm]
\def\angleA{0 }% space after value
\def\angleB{45 }
\begin{pspicture}(4,3)
\psarc[angleCheck=false,linecolor=red,showpoints=true]%
  (0,0){3}{ \angleA }{ \angleB 0.5 mul 30 add }
\end{pspicture}
\end{LTXexample}

Without disabling the angle check, the above code causes an error because
of the second argument, which is not a correct angle value.

%--------------------------------------------------------------------------------------
\section{Dashed Lines}
%--------------------------------------------------------------------------------------
Tobias Nähring implemented an enhanced feature for dashed lines. The number
of arguments is no more limited.

\begin{verbatim}
dash=value1[unit] value2[unit] ...
\end{verbatim}

\begin{LTXexample}[width=0.4\linewidth]
\psset{linewidth=2.5pt,unit=0.6}
\begin{pspicture}(-5,-4)(5,4)
 \psgrid[subgriddiv=0,griddots=10,gridlabels=0pt]
  \psset{linestyle=dashed}
  \pscurve[dash=5mm 1mm 1mm 1mm,linewidth=0.1](-5,4)(-4,3)(-3,4)(-2,3)
  \psline[dash=5mm 1mm 1mm 1mm 1mm 1mm 1mm 1mm 1mm 1mm](-5,0.9)(5,0.9)
  \psccurve[linestyle=solid](0,0)(1,0)(1,1)(0,1)
  \psccurve[linestyle=dashed,dash=5mm 2mm 0.1 0.2,linetype=0](0,0)(-2.5,0)(-2.5,-2.5)(0,-2.5)
  \pscurve[dash=3mm 3mm 1mm 1mm,linecolor=red,linewidth=2pt](5,-4)(5,2)(4.5,3.5)(3,4)(-5,4)
\end{pspicture}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\section{\CMD{rmultiput}: a multiple \CMD{rput}}
%--------------------------------------------------------------------------------------
\verb+PSTricks+ already knows a \verb+multirput+, which puts a box n times with
a difference of $dx$ and $dy$ relativ to each other. It is not possible to put
it with a different distance from one point to the next one. This is possible
with \verb+rmultiput+:
\begin{verbatim}
\rmultiput[<options>]{<any material>}(x1,y1)(x2,y2) ... (xn,yn)
\rmultiput*[<options>]{<any material>}(x1,y1)(x2,y2) ... (xn,yn)
\end{verbatim}

\begin{LTXexample}[width=6.2cm]
\psset{unit=0.75}
\begin{pspicture}(-4,-4)(4,4)
\rmultiput[rot=45]{\red\psscalebox{3}{\ding{250}}}%
    (-2,-4)(-2,-3)(-3,-3)(-2,-1)(0,0)(1,2)(1.5,3)(3,3)
\rmultiput[rot=90,ref=lC]{\blue\psscalebox{2}{\ding{253}}}%
    (-2,2.5)(-2,2.5)(-3,2.5)(-2,1)(1,-2)(1.5,-3)(3,-3)
\psgrid[subgriddiv=0,gridcolor=lightgray]
\end{pspicture}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\section{\CMD{psrotate}: Rotating objects}
%--------------------------------------------------------------------------------------
\CMD{rput} also has an optional argument for rotating objects, but always
depending to the \CMD{rput} coordinates. With \CMD{psrotate}  the rotating
center can be placed anywhere. The rotation is done with \verb+\pscustom+,
all optional arguments are only valid if they are part of the \verb+\pscustom+
macro.
\begin{verbatim}
\psrotate[options](x,y){rot angle}{<object>}
\end{verbatim}

\begin{LTXexample}[width=0.4\linewidth]
\psset{unit=0.75}
\begin{pspicture}(-0.5,-3.5)(8.5,4.5)
  \psaxes{->}(0,0)(-0.5,-3)(8.5,4.5)
  \psdots[linecolor=red,dotscale=1.5](2,1)
  \psarc[linecolor=red,linewidth=0.4pt,showpoints=true]
        {->}(2,1){3}{0}{60}
  \pspolygon[linecolor=green,linewidth=1pt](2,1)(5,1.1)(6,-1)(2,-2)
  \psrotate[linecolor=blue,linewidth=1pt](2,1){60}{
    \pspolygon(2,1)(5,1.1)(6,-1)(2,-2)}
\end{pspicture}
\end{LTXexample}


\clearpage
\iffalse
%--------------------------------------------------------------------------------------
\section{\CMD{pslineII}: Colored lines}
%--------------------------------------------------------------------------------------
The dashed lines are by default black and white lines. The new macro \verb|\pslineII|
offers two-color lines and has the same syntax as \verb|\psline|.

\begin{LTXexample}[width=8cm]
\begin{pspicture}(0,-0.5)(7,0.5)
\pslineII[linewidth=5pt,arrowscale=2]{o-o}(0,0)(7,0)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{The options}
%--------------------------------------------------------------------------------------

\begin{center}
\begin{tabular}{l|p{6cm}}
name & meaning\\\hline
\verb|dashColorI| & first color, default is \verb|black|\tabularnewline
\verb|dashColorII| & second color, default is \verb|red|\tabularnewline
\verb|dashNo| & the difference in per cent of the colored lines, default is $0.2$\tabularnewline
\verb|linecap| & \parbox[t]{6cm}{how two lines are connected.\\
	0: no modification\\
	1: rounded edges\\
	2: an additional half square at both ends}
\end{tabular}
\end{center}

\verb|dashNo| can have values greater than $1$. In this case the value will be taken as an absolute width in the pt unit. Only this unit is possible!

\begin{LTXexample}[width=3.5cm]
\psset{linewidth=2pt}
\begin{pspicture}(3,3)
  \pslineII{->}(0,0)(3,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{linewidth=2pt}
\begin{pspicture}(3,3)
  \pslineII[dashColorI=blue]{->}(0,0)(3,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{linewidth=2pt}
\begin{pspicture}(3,3)
  \pslineII[dashColorI=blue,dashNo=15]{->}(0,0)(3,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{linewidth=2pt}
\begin{pspicture}(3,3)
  \pslineII[dashColorI=blue,linecap=1,%
      dashNo=0.3,linewidth=0.5](0,0)(2,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[pos=t]
\psset{linewidth=15pt,dashNo=10}
\begin{pspicture}(0,1)(10,-6)
  \pslineII[linecap=2](0,0)(5,0)(5,-5)(0,-5)(0,0)
  \rput{45}(7,-2.5){%
    \pslineII[linecap=1,dashColorI=yellow,%
       dashColorII=cyan](0,0)(5,0)(5,-5)(0,-5)(0,0)%
}
\end{pspicture}
\end{LTXexample}

\clearpage

\fi

%--------------------------------------------------------------------------------------
\section{\CMD{psbrace}}
%--------------------------------------------------------------------------------------
\subsection{Syntax}
\begin{verbatim}
\psbrace[<options>](<A>)(<B>){<text>}
\end{verbatim}

\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,4)
\psgrid[subgriddiv=0,griddots=10]
\pnode(0,0){A}
\pnode(4,4){B}
\psbrace[linecolor=red,ref=lC](A)(B){Text I}
\psbrace[linecolor=blue,ref=lC](3,4)(0,1){Text II}
\end{pspicture}
\end{LTXexample}

\bigskip
The option \verb|\specialCoor| is enabled, so that all types of coordinates are possible, (nodename), ($x,y$), ($nodeA|nodeB$), ...

%--------------------------------------------------------------------------------------
\subsection{Options}
%--------------------------------------------------------------------------------------

Additional to all other available options from \verb|pstricks| or the other related packages,  there are two new option, named  \verb|braceWidth| and \verb|bracePos|. All important ones are shown in the following table.

\begin{center}
\begin{tabular}{l|l}
name & meaning\\\hline
\verb|braceWidth| & default is $0.35$\\
\verb|bracePos| & relative position (default is $0.5$)\\
\verb|linearc| & absolute value for the arcs (default is $2$mm)\\
\verb|nodesepA| & x-separation (default is $0pt$)\\
\verb|nodesepB| & y-separation (default is $0pt$)\\
\verb|rot| & additional rotating for the text (default is $0$)\\
\verb|ref| & reference point for the text (default is c)
\end{tabular}
\end{center}

By default the text is written perpedicular to the brace line and can be changed with
the \verb|pstricks| option \verb|rot=...|. The text parameter can take any object and
may also be empty. The reference point can be any value of the combination of \verb|l| (left) 
or \verb|r| (right) and \verb|b| (bottom) or \verb|B| (Baseline) or \verb|C| (center) 
or \verb|t| (top), where the default is \verb|c|, the center of the object.

%--------------------------------------------------------------------------------------
%\subsection{Examples}
%--------------------------------------------------------------------------------------

\begin{LTXexample}
\begin{pspicture}(8,2.5)
\psbrace(0,0)(0,2){\fbox{Text}}%
\psbrace[nodesepA=20pt](2,0)(2,2){\fbox{Text}}
\psbrace[ref=lC](4,0)(4,2){\fbox{Text}}
\psbrace[ref=lt,rot=90,nodesepB=-15pt](6,0)(6,2){\fbox{Text}}
\psbrace[ref=lt,rot=90,nodesepA=-5pt,nodesepB=15pt](8,2)(8,0){\fbox{Text}}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}
\def\someMath{$\int\limits_1^{\infty}\frac{1}{x^2}\,dx=1$}
\begin{pspicture}(8,2.5)
\psbrace(0,0)(0,2){\someMath}%
\psbrace[nodesepA=30pt](2,0)(2,2){\someMath}
\psbrace[ref=lC](4,0)(4,2){\someMath}
\psbrace[ref=lt,rot=90,nodesepB=-30pt](6,0)(6,2){\someMath}
\psbrace[ref=lt,rot=90,nodesepB=30pt](8,2)(8,0){\someMath}
\end{pspicture}
\end{LTXexample}

%$

\begin{LTXexample}
\begin{pspicture}(\linewidth,5)
\psbrace(0,0.5)(\linewidth,0.5){\fbox{Text}}%
\psbrace[bracePos=0.25,nodesepB=-10pt,rot=90](0,2)(\linewidth,2){\fbox{Text}}
\psbrace[ref=lC,nodesepA=-3.5cm,nodesepB=-15pt,rot=90](0,4)(\linewidth,4){%
   \fbox{some very, very long wonderful Text}}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=8cm,wide]
\psset{unit=0.8}
\begin{pspicture}(10,11)
\psgrid[subgriddiv=0,griddots=10]
\pnode(0,0){A}
\pnode(4,6){B}
\psbrace[ref=lC](A)(B){One}
\psbrace[rot=180,nodesepA=-5pt,ref=rb](B)(A){Two}
\psbrace[linecolor=blue,bracePos=0.25,braceWidth=1,ref=lB](8,1)(1,7){Three}
\psbrace[braceWidth=-1,rot=180,ref=rB](8,1)(1,7){Four}
\psbrace[linearc=0.5,linecolor=red,linewidth=3pt,braceWidth=1.5,%
  bracePos=0.25,ref=lC](8,1)(8,9){A}
\psbrace(4,9)(6,9){}
\psbrace(6,9)(6,7){}
\psbrace(6,7)(4,7){}
\psbrace(4,7)(4,9){}
\psset{linecolor=red}
\psbrace[ref=lb](7,10)(3,10){I}
\psbrace[ref=lb,bracePos=0.75](3,10)(3,6){II}
\psbrace[ref=lb](3,6)(7,6){III}
\psbrace[ref=lb](7,6)(7,10){IV}
\end{pspicture}
\end{LTXexample}

%$

\begin{LTXexample}[wide,width=5cm]
\[
\begin{pmatrix}
    \Rnode[vref=2ex]{A}{~1} \\
    & \ddots \\
    && \Rnode[href=2]{B}{1} \\
    &&& \Rnode[vref=2ex]{C}{0} \\
    &&&& \ddots \\
    &&&&& \Rnode[href=2]{D}{0}~ \\
\end{pmatrix}
\]
\psbrace[linewidth=0.1pt,rot=-90,nodesep=0.2](B)(A){\small n times}
\psbrace[linewidth=0.1pt,rot=-90,nodesep=0.2](D)(C){\small n times}
\end{LTXexample}


It is also possible to put a vertical brace around a default paragraph. This works
with setting two invisible nodes at the beginning and the end of the paragraph.
Inentation is possible with a minipage.

\begin{framed}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\noindent\rnode{A}{}

\vspace*{-1ex}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\vspace*{-2ex}
\noindent\rnode{B}{}\psbrace[linecolor=red](A)(B){}

Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\medskip
\hfill\begin{minipage}{0.95\linewidth}
\noindent\rnode{A}{}

\vspace*{-1ex}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\vspace*{-2ex}
\noindent\rnode{B}{}\psbrace[linecolor=red](A)(B){}
\end{minipage}
\end{framed}

\begin{lstlisting}
\begin{framed}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\noindent\rnode{A}{}

\vspace*{-1ex}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\vspace*{-2ex}
\noindent\rnode{B}{}\psbrace[linecolor=red](A)(B){}

Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\medskip
\hfill\begin{minipage}{0.95\linewidth}
\noindent\rnode{A}{}

\vspace*{-1ex}
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.
Some nonsense text, which is nothing more than nonsense.

\vspace*{-2ex}
\noindent\rnode{B}{}\psbrace[linecolor=red](A)(B){}
\end{minipage}
\end{framed}
\end{lstlisting}

\clearpage

%--------------------------------------------------------------------------------------
\section{Random dots}
%--------------------------------------------------------------------------------------
The syntax of the new macro \verb+\psRandom+ is:

\begin{verbatim}
\psRandom[<option>]{}
\psRandom[<option>]{<clip path>}
\psRandom[<option>](<xMax,yMax>){<clip path>}
\psRandom[<option>](<xMin,yMin>)(<xMax,yMax>){<clip path>}
\end{verbatim}

If there is no area for the dots defined, then \verb+(0,0)(1,1)+ in the actual
scale is used for placing the dots. This area should be greater than the clipping
path to be sure that the dots are placed over the full area. The clipping path can
be everything. If no clipping path is given, then the frame \verb+(0,0)(1,1)+
in user coordinates is used.  The new options are:
 
\begin{center}
\begin{tabular}{l|l|l}
name & default\\\hline
\verb|randomPoints| &   \verb|1000| & number of random dots\tabularnewline
\verb|color| & \verb+false+ & random color\tabularnewline
\end{tabular}
\end{center}


\begin{LTXexample}[width=0.3\linewidth]
\psset{unit=5cm}
\begin{pspicture}(1,1)
  \psRandom[dotsize=1pt,fillstyle=solid](1,1){\pscircle(0.5,0.5){0.5}}
\end{pspicture}
\begin{pspicture}(1,1)
  \psRandom[dotsize=2pt,randomPoints=5000,color,%
      fillstyle=solid](1,1){\pscircle(0.5,0.5){0.5}}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=0.4\linewidth]
\psset{unit=5cm}
\begin{pspicture}(1,1)
  \psRandom[randomPoints=200,dotsize=8pt,dotstyle=+]{}
\end{pspicture}
\begin{pspicture}(1.5,1)
  \psRandom[dotsize=5pt,color](0,0)(1.5,0.8){\psellipse(0.75,0.4)(0.75,0.4)}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}
\psset{unit=2.5cm}
\begin{pspicture}(0,-1)(3,1)
  \psRandom[dotsize=4pt,dotstyle=o,linecolor=blue,fillcolor=red,%
     fillstyle=solid,randomPoints=1000]%
      (0,-1)(3,1){\psplot{0}{3.14}{ x 114 mul sin }}
\end{pspicture}
\end{LTXexample}

\psset{unit=1cm}

\clearpage
%%  %--------------------------------------------------------------------------------------
%%  \section{Dice}
%%  %--------------------------------------------------------------------------------------
%%  \CMD{psdice} creates the view of a dice. The number on the dice is the only parameter. 
%%  The optional parameters, like the color can be used as usual. The macro is a box of 
%%  dimension zero and is placed
%%  at the current point. Use  the \CMD{rput} macro to place it anywhere. The only 
%%  special option name is \verb+dicescale+, with a default setting of \verb+1+. In this
%%  case the dice has a size of $1\mathrm{cm}\times1\mathrm{cm}$.
%%  
%%  \begin{center}
%%  \begin{pspicture}(-1,-1)(8,8)
%%  \multido{\iA=1+1}{6}{%
%%    \rput(\iA,7.5){\Huge\psdice[dicescale=0.75,linecolor=red]{\iA}}
%%    \rput(! -0.5 7 \iA\space sub){\Huge\psdice[dicescale=0.75,linecolor=green]{\iA}}%
%%    \multido{\iB=1+1}{6}{%
%%      \fpAdd{\iA}{\iB}{\iSum}
%%      \pnode(! \iA\space 7 \iB\space sub ){p\iA\iB}
%%      \rput(! \iA\space 7 \iB\space sub){\iSum}
%%  }}
%%  %
%%  \ncbox[linearc=0.35,nodesep=0.4,linestyle=dashed]{p15}{p51}
%%  \ncbox[linearc=0.35,nodesep=0.4,linestyle=dotted]{p11}{p66}
%%  \rput{90}(-1.5,3.5){1. dice}
%%  \rput{0}(3.5,8.5){2. dice}
%%  \psline[linewidth=1.5pt](0.25,0.5)(0.25,8)
%%  \psline[linewidth=1.5pt](-1,6.75)(6.5,6.75)
%%  %
%%  \end{pspicture}
%%  \end{center}
%%  
%%  \begin{lstlisting}
%%  \begin{pspicture}(-1,-1)(8,8)
%%  \multido{\iA=1+1}{6}{%
%%    \rput(\iA,7.5){\Huge\psdice[dicescale=0.75,linecolor=red]{\iA}}
%%    \rput(! -0.5 7 \iA\space sub){\Huge\psdice[dicescale=0.75,linecolor=green]{\iA}}%
%%    \multido{\iB=1+1}{6}{%
%%      \fpAdd{\iA}{\iB}{\iSum}
%%      \pnode(! \iA\space 7 \iB\space sub ){p\iA\iB}
%%      \rput(! \iA\space 7 \iB\space sub){\iSum}
%%  }}
%%  %
%%  \ncbox[linearc=0.35,nodesep=0.4,linestyle=dashed]{p15}{p51}
%%  \ncbox[linearc=0.35,nodesep=0.4,linestyle=dotted]{p11}{p66}
%%  \rput{90}(-1.5,3.5){1. dice}
%%  \rput{0}(3.5,8.5){2. dice}
%%  \psline[linewidth=1.5pt](0.25,0.5)(0.25,8)
%%  \psline[linewidth=1.5pt](-1,6.75)(6.5,6.75)
%%  %
%%  \end{pspicture}
%%  \end{lstlisting}
%%  
%%  
%%  \clearpage
%--------------------------------------------------------------------------------------
\section{Arrows}
%--------------------------------------------------------------------------------------
\subsection{Definition}
%--------------------------------------------------------------------------------------
\verb|pstricks-add| defines the following ''arrows``:

\begin{center}
  \bgroup
  \def\myline#1{\psline[linecolor=red,linewidth=1pt]{#1}(0,1ex)(1.3,1ex)}%
  \psset{arrowscale=1.5}
  \begin{tabular}{cp{1.8cm}l}%
    Value & Example & Name \\[2pt]\hline
    \verb/-/      & \myline{-}      & None\\
    \verb/<->/    & \myline{<->}    & Arrowheads.\\
    \verb/>-</    & \myline{>-<}    & Reverse arrowheads.\\
    \verb/<<->>/  & \myline{<<->>}  & Double arrowheads.\\
    \verb/>>-<</  & \myline{>>-<<}  & Double reverse arrowheads.\\
    \verb/|-|/    & \myline{|-|}    & T-bars, flush to endpoints.\\
    \verb/|*-|*/  & \myline{|*-|*}  & T-bars, centered on endpoints.\\
    \verb/[-]/    & \myline{[-]}    & Square brackets.\\
    \verb/]-[/    & \myline{]-[}    & Reversed square brackets.\\
    \verb/(-)/    & \myline{(-)}    & Rounded brackets.\\
    \verb/)-(/    & \myline{)-(}    & Reversed rounded brackets.\\
    \verb/o-o/    & \myline{o-o}    & Circles, centered on endpoints.\\
    \verb/*-*/    & \myline{*-*}    & Disks, centered on endpoints.\\
    \verb/oo-oo/  & \myline{oo-oo}  & Circles, flush to endpoints.\\
    \verb/**-**/  & \myline{**-**}  & Disks, flush to endpoints.\\
    \verb/|<->|/  & \myline{|<->|}  & T-bars and arrows.\\
    \verb/|>-<|/  & \myline{|>-<|}  & T-bars and reverse arrows.\\
    \verb/h-h|/   & \myline{h-h}    & left/right hook arrows.\\
    \verb/H-H|/   & \myline{H-H}    & left/right hook arrows.\\
  \end{tabular}
  \egroup
\end{center}



You can also mix and match, e.g., \verb/->/, \verb/*-)/ and \verb/[->/ are all valid values
of the \verb|arrows| parameter. The parameter can be set with
\begin{verbatim}
\psset{arrows=<type>}
\end{verbatim}

\noindent or for some macros with a special option, like\\[5pt]
\noindent\verb|\psline[<general options>]{<arrow type>}(A)(B)|\\
\noindent\verb/\psline[linecolor=red,linewidth=2pt]{|->}(0,0)(0,2)/ \ \psline[linecolor=red,linewidth=2pt]{|->}(0,0)(0,2)

\subsection{Multiple arrows}
There are two new options which are only valid for the arrow type \verb+<<+ or \verb+>>+.
\verb+nArrow+ sets both, the \verb+nArrowA+ and the  \verb+nArrowB+ parameter. The meaning 
is declared in the following tables. Without setting one of these parameters the behaviour
is like the one described in the old PSTricks manual.

\begin{center}
  \begin{tabular}{lc}%
    Value & Meaning \\[2pt]\hline
    \verb+->>+   & \ -A \\
    \verb+<<->>+ & A-A\\
    \verb+<<-+   & A-\ \\
    \verb+>>-+   & B-\ \\
    \verb+-<<+   & \ -B\\
    \verb+>>-<<+ & B-B\\
    \verb+>>->>+ & B-A\\
    \verb+<<-<<+ & A-B
  \end{tabular}
\end{center}




\begin{center}
  \bgroup
  \psset{linecolor=red,linewidth=1pt,arrowscale=2}%
  \begin{tabular}{lp{2.8cm}}%
    Value & Example \\[2pt]\hline
    \verb+\psline{->>}(0,1ex)(2.3,1ex)+  & \psline{->>}(0,1ex)(2.3,1ex) \\
    \verb+\psline[nArrowsA=3]{->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3]{->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=5]{->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=5]{->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline{<<-}(0,1ex)(2.3,1ex)+  & \psline{<<-}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=3]{<<-}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3]{<<-}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=5]{<<-}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=5]{<<-}(0,1ex)(2.3,1ex)\\
    \verb+\psline{<<->>}(0,1ex)(2.3,1ex)+  & \psline{<<->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=3]{<<->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3]{<<->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=5]{<<->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=5]{<<->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline{<<-|}(0,1ex)(2.3,1ex)+  & \psline{<<-|}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=3]{<<-<<}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3]{<<-<<}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=5]{<<-o}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=5]{<<-o}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=3,nArrowsB=4]{<<-<<}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3,nArrowsB=4]{<<-<<}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=3,nArrowsB=4]{>>->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=3,nArrowsB=4]{>>->>}(0,1ex)(2.3,1ex)\\
    \verb+\psline[nArrowsA=1,nArrowsB=4]{>>->>}(0,1ex)(2.3,1ex)+  & \psline[nArrowsA=1,nArrowsB=4]{>>->>}(0,1ex)(2.3,1ex)\\
  \end{tabular}
  \egroup
\end{center}


\clearpage
\subsection{\texttt{hookarrow}}
\begin{LTXexample}
\psset{arrowsize=8pt,arrowlength=1,linewidth=1pt,nodesep=2pt,shortput=tablr}
\large
\begin{psmatrix}[colsep=12mm,rowsep=10mm]
        &   & $R_2$            \\
        &   &   0   &   & $R_3$\\
$e_b:S$ & 1 &       & 1 & 0    \\
        &   &   0              \\
        &   &   $R_1$          \\
\end{psmatrix}
\ncline{h-}{1,3}{2,3}<{$e_{r2}$}>{$f_{r2}$}
\ncline{-h}{2,3}{3,2}<{$e_1$}
\ncline{-h}{3,1}{3,2}^{$e_s$}_{$f_{s}$}
\ncline{-h}{3,2}{4,3}>{$e_3$}<{$f_3$}
\ncline{-h}{4,3}{3,4}>{$e_4$}<{$f_4$}
\ncline{-h}{3,4}{2,3}>{$e_2$}<{$f_2$}
\ncline{-h}{3,4}{3,5}^{$e_5$}
\ncline{-h}{3,5}{2,5}<{$e_{r3}$}>{$f_{r3}$}
\ncline{-h}{4,3}{5,3}<{$e_{r1}$}>{$f_{r1}$}
\end{LTXexample}



\subsection{\texttt{hookrightarrow} and \texttt{hookleftarrow}}
This is another type of an arrow and abbreviated with \verb+H+. The length and width of the hook
is set by the new options \verb+hooklength+ and \verb+hookwidth+, which are by default set to
%
\begin{verbatim}
\psset{hooklength=3mm,hookwidth=1mm}
\end{verbatim}
%
If the line begins with a right hook then the line ends with a left hook and vice versa:

\begin{LTXexample}[width=3cm]
\begin{pspicture}(3,4)
\psline[linewidth=5pt,linecolor=blue,hooklength=5mm,hookwidth=-3mm]{H->}(0,3.5)(3,3.5)
\psline[linewidth=5pt,linecolor=red,hooklength=5mm,hookwidth=3mm]{H->}(0,2.5)(3,2.5)
\psline[linewidth=5pt,hooklength=5mm,hookwidth=3mm]{H-H}(0,1.5)(3,1.5)
\psline[linewidth=1pt]{H-H}(0,0.5)(3,0.5)
\end{pspicture}
\end{LTXexample}



\begin{LTXexample}[width=7.25cm]
$\begin{psmatrix}
E&W_i(X)&&Y\\
&&W_j(X)
\psset{arrows=->,nodesep=3pt,linewidth=2pt}
\everypsbox{\scriptstyle}
\ncline[linecolor=red,arrows=H->,%
  hooklength=4mm,hookwidth=2mm]{1,1}{1,2}       
\ncline{1,2}{1,4}^{\tilde{t}}
\ncline{1,2}{2,3}<{W_{ij}}
\ncline{2,3}{1,4}>{\tilde{s}}
\end{psmatrix}$
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{ArrowInside} Option}
%--------------------------------------------------------------------------------------

It is now possible to have arrows inside the lines and not only at the beginning or
the end. The new defined options

\psset{arrowscale=2,linecolor=red,unit=1cm,linewidth=1.5pt}
\begin{longtable}{l|p{9cm}|p{2.2cm}}
Name & Example & Output\\\hline
\endfirsthead
Name & Example & Output\\\hline
\endhead
\texttt{ArrowInside} &
	\texttt{\textbackslash psline[ArrowInside=->](0,0)(2,0)} &
	\psline[ArrowInside=->](0,0.1)(2,0.1) \\
\texttt{ArrowInsidePos} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsidePos=0.25](0,0)(2,0)}
& \psline[ArrowInside=->, ArrowInsidePos=0.25](0,0.1)(2,0.1) \\
\texttt{ArrowInsidePos} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsidePos=10](0,0)(2,0)}
& \psline[ArrowInside=->, ArrowInsidePos=10](0,0.1)(2,0.1) \\
\texttt{ArrowInsideNo} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsideNo=2](0,0)(2,0)}
& \psline[ArrowInside=->, ArrowInsideNo=2](0,0.1)(2,0.1) \\
\texttt{ArrowInsideOffset} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsideNo=2,\%}
	\hspace*{20pt}\texttt{ArrowInsideOffset=0.1](0,0)(2,0)}
& \psline[ArrowInside=->, ArrowInsideNo=2,ArrowInsideOffset=0.1](0,0.1)(2,0.1) \\
%
\texttt{ArrowInside} & \texttt{\textbackslash psline[ArrowInside=->]\{->\}(0,0)(2,0)} &
	\psline[ArrowInside=->]{->}(0,0)(2,0)\\
\texttt{ArrowInsidePos} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsidePos=0.25]\{->\}(0,0)(2,0)}
	& \psline[ArrowInside=->, ArrowInsidePos=0.25]{->}(0,0)(2,0) \\
\texttt{ArrowInsidePos} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsidePos=10]\{->\}(0,0)(2,0)}
	& \psline[ArrowInside=->, ArrowInsidePos=10]{->}(0,0)(2,0) \\
\texttt{ArrowInsideNo} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsideNo=2]\{->\}(0,0)(2,0)}
	& \psline[ArrowInside=->, ArrowInsideNo=2]{->}(0,0)(2,0) \\
\texttt{ArrowInsideOffset} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{ArrowInsideNo=2,\%}
	\hspace*{20pt}\texttt{ArrowInsideOffset=0.1]\{->\}(0,0)(2,0)}
	& \psline[ArrowInside=->, ArrowInsideNo=2,ArrowInsideOffset=0.1]{->}(0,0)(2,0) \\
%
\texttt{ArrowFill} & \texttt{\textbackslash psline[ArrowFill=false,\%}
	\hspace*{20pt}\texttt{arrowinset=0]\{->\}(0,0)(2,0)} &
	\psline[ArrowFill=false,arrowinset=0]{->}(0,0)(2,0)\\
\texttt{ArrowFill} & \texttt{\textbackslash psline[ArrowFill=false,\%}
	\hspace*{20pt}\texttt{arrowinset=0]\{<<->>\}(0,0)(2,0)} &
	\psline[ArrowFill=false,arrowinset=0]{<<->>}(0,0)(2,0)\\
\texttt{ArrowFill} & \texttt{\textbackslash psline[ArrowInside=->,\%}
	\hspace*{20pt}\texttt{arrowinset=0,\%}\hspace{30pt}
	\hspace*{20pt}\texttt{ArrowFill=false,\%}\hspace{30pt}
	\hspace*{20pt}\texttt{ArrowInsideNo=2,\%}
	\hspace*{20pt}\texttt{ArrowInsideOffset=0.1]\{->\}(0,0)(2,0)}
	& \psline[ArrowInside=->, ArrowFill=false,ArrowInsideNo=2,ArrowInsideOffset=0.1]{->}(0,0)(2,0) \\
\end{longtable}

\medskip
Without the default arrow definition there is only the one inside the line, defined
by the type and
the position. The position is relative to the length of the whole line. $0.25$ means
at $25\%$ of the
line length. The peak of the arrow gets the coordinates which are calculated by the
macro. If you want arrows with an abolute position difference, then choose a
value greater than \verb|1|, e.g. \verb|10| which places an arrow every 10 pt. The
default unit \verb|pt| cannot be changed.

\noindent
\begin{tabularx}{\linewidth}{@{\color{red}\vrule width 2pt}lX@{}}
& The \verb+ArrowInside+ takes only arrow definitions like \verb+->+ into account. 
Arrows from right to left (\verb+<-+) are not possible and ignored. If you need
such arrows, change the order of the pairs of coordinates for the line or curve macro. 
\end{tabularx}

%--------------------------------------------------------------------------------------
\subsection{\texttt{ArrowFill} Option}
%--------------------------------------------------------------------------------------

By default all arrows are filled polygons. With the option \verb|ArrowFill=false| there
are ''white``  arrows. Only for the beginning/end arrows they are empty, the inside arrows
are overpainted with the line.


\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=red,arrowinset=0]{<->}(0,0)(3,0)
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=red,arrowinset=0,ArrowFill=false]{<->}(0,0)(3,0)
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=red,arrowinset=0,arrowsize=0.2,ArrowFill=false]{<->}(0,0)(3,0)
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=blue,arrowscale=6,ArrowFill=true]{>>->>}(0,0)(3,0)
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=blue,arrowscale=6,ArrowFill=false]{>>->>}(0,0)(3,0)
\rule{3cm}{0pt}\\[30pt]
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=blue,arrowscale=6,ArrowFill=true]{>|->|}(0,0)(3,0)
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=3}
\psline[linecolor=blue,arrowscale=6,ArrowFill=false]{>|->|}(0,0)(3,0)%
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{Examples}
%--------------------------------------------------------------------------------------

All examples are printed with \verb|\psset{arrowscale=2,linecolor=red}|.
\subsubsection{\CMD{psline}}

\bigskip
\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=->]{|<->|}(2,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-|]{|-|}(2,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=->,ArrowInsideNo=2]{->}(2,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=->,ArrowInsideNo=2,ArrowInsideOffset=0.1]{->}(2,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-*]{->}(0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-*,ArrowInsidePos=0.25]{->}(0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-*,ArrowInsidePos=0.25,ArrowInsideNo=2]{->}%
   (0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=->, ArrowInsidePos=0.25]{->}%
        (0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[linestyle=none,ArrowInside=->,ArrowInsidePos=0.25]{->}%
        (0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-<, ArrowInsidePos=0.75]{->}%
     (0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true,ArrowInside=-*}
\psline(0,0)(2,1)(3,0)(4,0)(6,2)
\psset{linestyle=none}
\psline[ArrowInsidePos=0](0,0)(2,1)(3,0)(4,0)(6,2)
\psline[ArrowInsidePos=1](0,0)(2,1)(3,0)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,5)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=->,ArrowInsidePos=20](0,0)(3,0)%
       (3,3)(1,3)(1,5)(5,5)(5,0)(7,0)(6,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,2)
\psset{arrowscale=2,ArrowFill=true}
\psline[ArrowInside=-|]{<->}(0,2)(2,0)(3,2)(4,0)(6,2)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsubsection{\CMD{pspolygon}}
%--------------------------------------------------------------------------------------
% Polygons (\pspolygon macro)

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,3)
\psset{arrowscale=2}
\pspolygon[ArrowInside=-|](0,0)(3,3)(6,3)(6,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,3)
\psset{arrowscale=2}
\pspolygon[ArrowInside=->,ArrowInsidePos=0.25]%
     (0,0)(3,3)(6,3)(6,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,3)
\psset{arrowscale=2}
\pspolygon[ArrowInside=->,ArrowInsideNo=4]%
       (0,0)(3,3)(6,3)(6,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,3)
\psset{arrowscale=2}
\pspolygon[ArrowInside=->,ArrowInsideNo=4,%
   ArrowInsideOffset=0.1](0,0)(3,3)(6,3)(6,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,3)
\psset{arrowscale=2}
 \pspolygon[ArrowInside=-|](0,0)(3,3)(6,3)(6,1)
 \psset{linestyle=none,ArrowInside=-*}
 \pspolygon[ArrowInsidePos=0](0,0)(3,3)(6,3)(6,1)
 \pspolygon[ArrowInsidePos=1](0,0)(3,3)(6,3)(6,1)
 \psset{ArrowInside=-o}
 \pspolygon[ArrowInsidePos=0.25](0,0)(3,3)(6,3)(6,1)
 \pspolygon[ArrowInsidePos=0.75](0,0)(3,3)(6,3)(6,1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\begin{pspicture}(6,5)
\psset{arrowscale=2}
  \pspolygon[ArrowInside=->,ArrowInsidePos=20]%
    (0,0)(3,0)(3,3)(1,3)(1,5)(5,5)(5,0)(7,0)(6,3)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsubsection{\CMD{psbezier}}
%--------------------------------------------------------------------------------------
% Bezier curves (\psbezier macro)

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(3,3)
\psset{arrowscale=2}
  \psbezier[ArrowInside=-|](1,1)(2,2)(3,3)
  \psset{linestyle=none,ArrowInside=-o}
  \psbezier[ArrowInsidePos=0.25](1,1)(2,2)(3,3)
  \psbezier[ArrowInsidePos=0.75](1,1)(2,2)(3,3)
  \psset{linestyle=none,ArrowInside=-*}
  \psbezier[ArrowInsidePos=0](1,1)(2,2)(3,3)
  \psbezier[ArrowInsidePos=1](1,1)(2,2)(3,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
\psset{arrowscale=2}
  \psbezier[ArrowInside=->,showpoints=true]%
     {*-*}(2,3)(3,0)(4,2)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
\psset{arrowscale=2}
  \psbezier[ArrowInside=->,showpoints=true,%
      ArrowInsideNo=2](2,3)(3,0)(4,2)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
\psset{arrowscale=2}
  \psbezier[ArrowInside=->,showpoints=true,%
      ArrowInsideNo=2,ArrowInsideOffset=-0.2]{->}(2,3)(3,0)(4,2)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=5.5cm]
\begin{pspicture}(5,3)
\psset{arrowscale=2}
  \psbezier[ArrowInsideNo=9,ArrowInside=-|,%
    showpoints=true]{*-*}(1,3)(3,0)(5,3)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
\psset{arrowscale=2}
  \psset{ArrowInside=-|}
  \psbezier[ArrowInsidePos=0.25,showpoints=true]{*-*}(2,3)(3,0)(4,2)
  \psset{linestyle=none}
  \psbezier[ArrowInsidePos=0.75](2,3)(3,0)(4,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=5.5cm]
\begin{pspicture}(5,6)
\psset{arrowscale=2}
  \pnode(3,4){A}\pnode(5,6){B}\pnode(5,0){C}
  \psbezier[ArrowInside=->,%
     showpoints=true](A)(B)(C)
  \psset{linestyle=none,ArrowInside=-<}
  \psbezier[ArrowInsideNo=4](A)(B)(C)
  \psset{ArrowInside=-o}
  \psbezier[ArrowInsidePos=0.1](A)(B)(C)
  \psbezier[ArrowInsidePos=0.9](A)(B)(C)
  \psset{ArrowInside=-*}
  \psbezier[ArrowInsidePos=0.3](A)(B)(C)
  \psbezier[ArrowInsidePos=0.7](A)(B)(C)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[pos=t]
\begin{pspicture}(-3,-5)(15,5)
  \psbezier[ArrowInsideNo=19,%
      ArrowInside=->,ArrowFill=false,%
      showpoints=true]{->}(-3,0)(5,-5)(8,5)(15,-5)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsubsection{\CMD{pcline}}
%--------------------------------------------------------------------------------------
These examples need the package \verb|pst-node|.

% Lines (\pcline macro)
\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,1)
\psset{arrowscale=2}
\pcline[ArrowInside=->](0,0)(2,1)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,1)
\psset{arrowscale=2}
\pcline[ArrowInside=->]{<->}(0,0)(2,1)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,1)
\psset{arrowscale=2}
\pcline[ArrowInside=-|,ArrowInsidePos=0.75]{|-|}(0,0)(2,1)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=2.5cm]
\psset{arrowscale=2}
\pcline[ArrowInside=->,ArrowInsidePos=0.65]{*-*}(0,0)(2,0)
\naput[labelsep=0.3]{\large$g$}
\end{LTXexample}


\begin{LTXexample}[width=2.5cm]
\psset{arrowscale=2}
\pcline[ArrowInside=->,ArrowInsidePos=10]{|-|}(0,0)(2,0)
\naput[labelsep=0.3]{\large$l$}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsubsection{\CMD{pccurve}}
%--------------------------------------------------------------------------------------
These examples also need the package \verb|pst-node|.

\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2}
\pccurve[ArrowInside=->,ArrowInsidePos=0.65,showpoints=true]{*-*}(0,0)(2,2)
\naput[labelsep=0.3]{\large$h$}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=2.5cm]
\begin{pspicture}(2,2)
\psset{arrowscale=2}
\pccurve[ArrowInside=->,ArrowInsideNo=3,showpoints=true]{|->}(0,0)(2,2)
\naput[labelsep=0.3]{\large$i$}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,4)
\psset{arrowscale=2}
\pccurve[ArrowInside=->,ArrowInsidePos=20]{|-|}(0,0)(4,4)
\naput[labelsep=0.3]{\large$k$}
\end{pspicture}
\end{LTXexample}

\clearpage
%--------------------------------------------------------------------------------------
\section{\CMD{psFormatInt}}
%--------------------------------------------------------------------------------------
There exist some packages and a lot of code to format an integer like $1\,000\,000$
or $1,234,567$ (in Europe $1.234.567$). But all packages expect a real number as
argument and cannot handle macros as an argument. For this case \verb|pstricks-add|
has a macro \verb|psFormatInt| which can handle both:

\begin{LTXexample}[width=3cm]
\psFormatInt{1234567}\\
\psFormatInt[intSeparator={,}]{1234567}\\
\psFormatInt[intSeparator=.]{1234567}\\
\psFormatInt[intSeparator=$\cdot$]{1234567}\\
\def\temp{965432}
\psFormatInt{\temp}
\end{LTXexample}

With the option \verb|intSeparator| the symbol can be changed to any any non-number character.


%--------------------------------------------------------------------------------------
\section{Color}
%--------------------------------------------------------------------------------------
%--------------------------------------------------------------------------------------
\subsection{Transparent colors}
%--------------------------------------------------------------------------------------
With the new defined fillstyle \verb|transparent|
\index{transparent@\texttt{transparent}}
\index{fillstyle!transparent@\texttt{transparent}}
and running the \verb|ps2pdf14| script to create the \verb|pdf| document, one can use the
\verb+transpalpha+ keyword to define a value for the alpha channel to get a transparent
color. Possible values are $0\le\mathrm{transpalpha}\le1$ which is a range from
totally transparent and not transparent. Without using the \verb|pdf14| format
it is not possible to get the transparency effect. The following example shows
the transparency effect for the values \verb|transpalpha=0.4| and \verb|transpalpha=0.8|.

% run through latex -> dvips -> ps2pdf14(!) and view 
% with Acrobat >= 5.0

\vfill
\begin{center}
\bgroup
\psset{fillstyle=transparent,linestyle=none}
\multido{\rA=0.4+0.4}{2}{
  \begin{pspicture}(-3.25,-3.25)(3.25,3.25)
    \pscircle[fillcolor=green,transpalpha=\rA](2;135){2cm}
    \pscircle[fillcolor=red,transpalpha=\rA](2;45){2cm}
    \pscircle[fillcolor=blue,transpalpha=\rA](1;-90){2cm}
  \end{pspicture}
}
\egroup
\end{center}


\begin{lstlisting}
\psset{fillstyle=transparent,linestyle=none}
\multido{\rA=0.4+0.4}{2}{
  \begin{pspicture}(-3.25,-3.25)(3.25,3.25)
    \pscircle[fillcolor=green,transpalpha=\rA](2;135){2cm}
    \pscircle[fillcolor=red,transpalpha=\rA](2;45){2cm}
    \pscircle[fillcolor=blue,transpalpha=\rA](1;-90){2cm}
  \end{pspicture}
}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsection{,,Manipulating Transparent colors''}
%--------------------------------------------------------------------------------------

\verb+pstricks-add+ simulates transparency with hatch lines:
\begin{lstlisting}
\def\defineTColor{\@ifnextchar[{\defineTColor@i}{\defineTColor@i[]}}
\def\defineTColor@i[#1]#2#3{%     transparency "Colors"
  \newpsstyle{#2}{%
     fillstyle=vlines,hatchwidth=0.1\pslinewidth,
     hatchsep=1\pslinewidth,hatchcolor=#3,#1%
  }%
}
\defineTColor{TRed}{red}
\defineTColor{TGreen}{green}
\defineTColor{TBlue}{blue}
\end{lstlisting}

There are three predefined "'transparent"` colors \verb+TRed+, \verb+TGreen+, \verb+TBlue+.
They are used as \PST styles and not as colors:

\resetOptions
\bgroup
\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(-3,-5)(5,5)
\psframe(-1,-3)(5,5) % objet de base
\psrotate(2,-2){15}{%
  \psframe[style=TRed](-1,-3)(5,5)}
\psrotate(2,-2){30}{%
  \psframe[style=TGreen](-1,-3)(5,5)}
\psrotate(2,-2){45}{%
  \psframe[style=TBlue](-1,-3)(5,5)}
\psframe[linewidth=3pt](-1,-3)(5,5)
\psdots[dotstyle=+,dotangle=45,dotscale=3](2,-2) % centre de la rotation
\end{pspicture}
\end{LTXexample}
\egroup

%--------------------------------------------------------------------------------------
\subsection{Calculated colors}
%--------------------------------------------------------------------------------------
The \verb+xcolor+ package (version 2.6) has a new feature for defining colors:
\begin{verbatim}
  \definecolor[ps]{<name>}{<model>}{< PS code >}
\end{verbatim}

\verb+model+ can be one of the color models, which PostScript will understand, e.g. \verb+rgb+.
With this definition the color is calculated on PostScript side.
\begin{LTXexample}[pos=t,preset=\centering]
\definecolor[ps]{bl}{rgb}{tx@addDict begin  Red Green Blue end}%
\psset{unit=1bp}
\begin{pspicture}(0,-30)(400,100)
\multido{\iLAMBDA=0+1}{400}{%
  \pstVerb{
    \iLAMBDA\space 379 add dup /lambda exch def
    tx@addDict begin  wavelengthToRGB end 
  }%
  \psline[linecolor=bl](\iLAMBDA,0)(\iLAMBDA,100)%
}
\psaxes[yAxis=false,Ox=350,dx=50bp,Dx=50]{->}(-29,-10)(420,100)
\uput[-90](420,-10){$\lambda$[\textsf{nm}]}
\end{pspicture}
\end{LTXexample}


\begin{center}
\newcommand{\Touch}{%
\psframe[linestyle=none,fillstyle=solid,fillcolor=bl,dimen=middle](0.1,0.75)}
\definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end}%
% Echelle 1cm <-> 40 nm
%         1 nm <-> 0.025 cm
\psframebox[fillstyle=solid,fillcolor=black]{%
\begin{pspicture}(-1,-0.5)(12,1.5)
\multido{\iLAMBDA=380+2}{200}{%
  \pstVerb{
    /lambda \iLAMBDA\space def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! lambda 0.025 mul 9.5 sub 0){\Touch}
}
\multido{\n=0+1,\iDiv=380+40}{11}{%
    \psline[linecolor=white](\n,0.1)(\n,-0.1)
    \uput[270](\n,0){\textbf{\white\iDiv}}}
    \psline[linecolor=white]{->}(11,0)
    \uput[270](11,0){\textbf{\white$\lambda$(nm)}}
\end{pspicture}}

\psframebox[fillstyle=solid,fillcolor=black]{%
\begin{pspicture}(-1,-0.5)(12,1)
  \pstVerb{
    /lambda 656 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 656 0.025 mul 9.5 sub 0){\Touch}
  \pstVerb{
    /lambda 486 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 486 0.025 mul 9.5 sub 0){\Touch}
   \pstVerb{
    /lambda 434 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 434 0.025 mul 9.5 sub 0){\Touch}
  \pstVerb{
    /lambda 410 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 410 0.025 mul 9.5 sub 0){\Touch}
\multido{\n=0+1,\iDiv=380+40}{11}{%
    \psline[linecolor=white](\n,0.1)(\n,-0.1)
    \uput[270](\n,0){\textbf{\white\iDiv}}}
    \psline[linecolor=white]{->}(11,0)
    \uput[270](11,0){\textbf{\white$\lambda$(nm)}}
\end{pspicture}}

Spectrum of hydrogen emission (Manuel Luque)
\end{center}

\begin{lstlisting}
\newcommand{\Touch}{%
\psframe[linestyle=none,fillstyle=solid,fillcolor=bl,dimen=middle](0.1,0.75)}
\definecolor[ps]{bl}{rgb}{tx@addDict begin Red Green Blue end}%
% Echelle 1cm <-> 40 nm
%         1 nm <-> 0.025 cm
\psframebox[fillstyle=solid,fillcolor=black]{%
\begin{pspicture}(-1,-0.5)(12,1.5)
\multido{\iLAMBDA=380+2}{200}{%
  \pstVerb{
    /lambda \iLAMBDA\space def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! lambda 0.025 mul 9.5 sub 0){\Touch}
}
\multido{\n=0+1,\iDiv=380+40}{11}{%
    \psline[linecolor=white](\n,0.1)(\n,-0.1)
    \uput[270](\n,0){\textbf{\white\iDiv}}}
    \psline[linecolor=white]{->}(11,0)
    \uput[270](11,0){\textbf{\white$\lambda$(nm)}}
\end{pspicture}}

\psframebox[fillstyle=solid,fillcolor=black]{%
\begin{pspicture}(-1,-0.5)(12,1)
  \pstVerb{
    /lambda 656 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 656 0.025 mul 9.5 sub 0){\Touch}
  \pstVerb{
    /lambda 486 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 486 0.025 mul 9.5 sub 0){\Touch}
   \pstVerb{
    /lambda 434 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 434 0.025 mul 9.5 sub 0){\Touch}
  \pstVerb{
    /lambda 410 def
    lambda
    tx@addDict begin  wavelengthToRGB end
  }%
 \rput(! 410 0.025 mul 9.5 sub 0){\Touch}
\multido{\n=0+1,\iDiv=380+40}{11}{%
    \psline[linecolor=white](\n,0.1)(\n,-0.1)
    \uput[270](\n,0){\textbf{\white\iDiv}}}
    \psline[linecolor=white]{->}(11,0)
    \uput[270](11,0){\textbf{\white$\lambda$(nm)}}
\end{pspicture}}

Spectrum of hydrogen emission (Manuel Luque)
\end{lstlisting}



%--------------------------------------------------------------------------------------
\subsection{Gouraud shading}
%--------------------------------------------------------------------------------------
\begin{quotation}
Gouraud shading is a method used in computer graphics to simulate the differing effects of 
light and colour across the surface of an object. In practice, Gouraud shading is used to 
achieve smooth lighting on low-polygon surfaces without the heavy computational requirements 
of calculating lighting for each pixel. The technique was first presented by Henri Gouraud in 1971.\\
~\hfill{\small \url{http://www.wikipedia.org}}
\end{quotation}

PostScript level 3 supports this kind of shading and it could only be seen with Acroread 7
or younger. Die Syntax is easy:

\begin{verbatim}
  \psGTriangle(x1,y1)(x2,y2)(x3,y3){color1}{color2}{color3}
\end{verbatim}

\psset{unit=0.75cm}

\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(0,-.25)(10,10)
  \psGTriangle(0,0)(5,10)(10,0){red}{green}{blue}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(0,-.25)(10,10)
  \psGTriangle*(0,0)(9,10)(10,3){black}{white!50}{red!50!green!95}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(0,-.25)(10,10)
  \psGTriangle*(0,0)(5,10)(10,0){-red!100!green!84!blue!86}
                               {-red!80!green!100!blue!40}
                               {-red!60!green!30!blue!100}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[pos=t,preset=\centering]
\definecolor{rose}{rgb}{1.00, 0.84, 0.88}
\definecolor{vertpommepasmure}{rgb}{0.80, 1.0, 0.40}
\definecolor{fushia}{rgb}{0.60, 0.30, 1.0}
\begin{pspicture}(0,-.25)(10,10)
  \psGTriangle(0,0)(5,10)(10,0){rose}{vertpommepasmure}{fushia}
\end{pspicture}
\end{LTXexample}

\newpage
%--------------------------------------------------------------------------------------
\part{\texttt{pst-node}}
%--------------------------------------------------------------------------------------

\iffalse
\section{\CMD{nclineII}}
%--------------------------------------------------------------------------------------
The dashed lines are black and white by default. The new macro \verb|\nclineII|
offers two-color lines and has the same syntax as \verb|\ncline|:
\begin{verbatim}
\ncline[<options>]{<Node A>}{<Node B>}
\end{verbatim}

\begin{LTXexample}[width=0.2\linewidth]
\circlenode[linecolor=blue,linewidth=2pt]{A}{A}%
\hspace{9cm}\circlenode[linecolor=cyan,linewidth=2pt]{B}{B}
\nclineII[linewidth=5pt]{A}{B}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{The options}
%--------------------------------------------------------------------------------------

These options are all defined in the package \verb|pstricks-add|.

\medskip
\begin{tabularx}{\linewidth}{l|X}
name & meaning\\\hline
\verb|dashColorI| & first color, default is \verb|black|\tabularnewline
\verb|dashColorII| & second color, default is \verb|red|\tabularnewline
\verb|dashNo| & The ratio of dashColorI to dashColorII, the default is $0.2$\tabularnewline
\end{tabularx}
\medskip

\verb|dashNo| can have values greater than $1$. In this case the value will be taken as an absolute width in the pt unit. Only this unit is possible!

%--------------------------------------------------------------------------------------
\subsection{Examples}
%--------------------------------------------------------------------------------------
\begin{LTXexample}[width=4.5cm]
\circlenode{A}{A}\hspace*{3cm}\dianode{B}{B}%
\nclineII[linewidth=8pt,dashColorI=blue]{A}{B}
\end{LTXexample}

\begin{LTXexample}[width=4.5cm]
\circlenode{A}{A}\hspace*{3cm}\circlenode{B}{B}%
\nclineII[dashColorI=blue,linewidth=3pt,dashNo=15]{->}{A}{B}
\end{LTXexample}

\begin{LTXexample}[width=4.5cm]
\dianode{A}{A}\hspace*{3cm}\circlenode{B}{B}%
\nclineII[dashColorI=blue,linecap=1,dashNo=0.3,linewidth=0.5]{A}{B}
\end{LTXexample}

\psset{unit=1cm}

%--------------------------------------------------------------------------------------
\section{\CMD{pclineII}}
%--------------------------------------------------------------------------------------
This is nearly the same macro as \verb|\psline| from the main \pnode{C}\verb|pstricks| package.
\begin{verbatim}
\pcline[<options>](<Node A>)(<Node B>)
\end{verbatim}

\begin{LTXexample}
\circlenode[linecolor=blue,linewidth=2pt]{A}{A}%
\hspace*{6cm}\circlenode[linecolor=cyan,linewidth=2pt]{B}{B}
\pclineII[linewidth=5pt](A)(B)
\end{LTXexample}


\begin{LTXexample}
\raggedright This macro makes only sense when connecting two ''invisible`` nodes, 
like this connection from here\pnode{D}\pclineII{->}(D)(C){} 
to the above word \verb|pstricks|.
\end{LTXexample}

\fi

%--------------------------------------------------------------------------------------
\section{\CMD{ncdiag} and \CMD{pcdiag}}
%--------------------------------------------------------------------------------------
With the new option \verb|lineAngle| the lines drawn by the \verb|ncdiag| macro
can now have a specified gradient. Without this option one has to define the two
arms (which maybe zero) and PSTricks draws the connection between them. Now there
is only a static \verb|armA|, the second one \verb|armB| is calculated when an angle
\verb|lineAngle| is defined. This angle is the gradient of the intermediate line
between the two arms. The syntax of \verb|ncdiag| is

\begin{verbatim}
\ncdiag[<options>]{<Node A>}{<Node B>}
\pcdiag[<options>](<Node A>)(<Node B>)
\end{verbatim}


\begin{tabularx}{\linewidth}{l|X}
name & meaning\\\hline
\verb|lineAngle| & angle of the intermediate line segment. Default is 0, which is the same than using \verb|ncdiag| without the \verb|lineAngle| option.\tabularnewline
\end{tabularx}


\resetOptions
\begin{LTXexample}[width=5.5cm]
\begin{pspicture}(5,6)
  \circlenode{A}{A}\quad\circlenode{C}{C}%
    \quad\circlenode{E}{E}
  \rput(0,4){\circlenode{B}{B}}
  \rput(1,5){\circlenode{D}{D}}
  \rput(2,6){\circlenode{F}{F}}
  \psset{arrowscale=2,linearc=0.2,%
    linecolor=red,armA=0.5, angleA=90,angleB=-90}
  \ncdiag[lineAngle=20]{->}{A}{B}
  \ncput*[nrot=:U]{line I}
  \ncdiag[lineAngle=20]{->}{C}{D}
  \ncput*[nrot=:U]{line II}
  \ncdiag[lineAngle=20]{->}{E}{F}
  \ncput*[nrot=:U]{line III}
\end{pspicture}
\end{LTXexample}


The \verb|ncdiag| macro sets the \verb|armB| dynamically to the calculated value. Any
user setting of \verb|armB| is overwritten by the macro. The \verb|armA| could be set to
a zero length:


\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
  \rput(0.5,0.5){\circlenode{A}{A}}
  \rput(3.5,3){\circlenode{B}{B}}
  {\psset{linecolor=red,arrows=<-,arrowscale=2}
  \ncdiag[lineAngle=60,%
      armA=0,angleA=0,angleB=180]{A}{B}
  \ncdiag[lineAngle=60,%
      armA=0,angleA=90,angleB=180]{A}{B}}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,3)
  \rput(1,0.5){\circlenode{A}{A}}
  \rput(4,3){\circlenode{B}{B}}
  {\psset{linecolor=red,arrows=<-,arrowscale=2}
  \ncdiag[lineAngle=60,%
      armA=0.5,angleA=0,angleB=180]{A}{B}
  \ncdiag[lineAngle=60,%
      armA=0,angleA=70,angleB=180]{A}{B}
  \ncdiag[lineAngle=60,%
      armA=0.5,angleA=180,angleB=180]{A}{B}}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=4.5cm]
\begin{pspicture}(4,5.5)
  \cnode*(0,0){2pt}{A}%
  \cnode*(0.25,0){2pt}{C}%
  \cnode*(0.5,0){2pt}{E}%
  \cnode*(0.75,0){2pt}{G}%
  \cnode*(2,4){2pt}{B}%
  \cnode*(2.5,4.5){2pt}{D}%
  \cnode*(3,5){2pt}{F}%
  \cnode*(3.5,5.5){2pt}{H}%
  {\psset{arrowscale=2,linearc=0.2,%
    linecolor=red,armA=0.5, angleA=90,angleB=-90}
  \pcdiag[lineAngle=20]{->}(A)(B)
  \pcdiag[lineAngle=20]{->}(C)(D)
  \pcdiag[lineAngle=20]{->}(E)(F)
  \pcdiag[lineAngle=20]{->}(G)(H)}
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\section{\CMD{ncdiagg} and \CMD{pcdiagg}}
%--------------------------------------------------------------------------------------
This is nearly the same than \verb+\ncdiag+ except that \verb+armB=0+ and the \verb+angleB+
value is computed by the macro, so that the line ends at the node with an angle
like a \verb+\pcdiagg+ line. The syntax of \verb|ncdiagg|/\verb+pcdiagg+ is

\begin{verbatim}
\ncdiag[<options>]{<Node A>}{<Node B>}
\pcdiag[<options>](<Node A>)(<Node B>)
\end{verbatim}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(4,6)
  \psset{linecolor=black}
  \circlenode{A}{A}%
  \quad\circlenode{C}{C}%
  \quad\circlenode{E}{E}
  \rput(0,4){\circlenode{B}{B}}
  \rput(1,5){\circlenode{D}{D}}
  \rput(2,6){\circlenode{F}{F}}
  {\psset{arrowscale=2,linearc=0.2,linecolor=red,armA=0.5, angleA=90}
  \ncdiagg[lineAngle=-160]{->}{A}{B}
  \ncput*[nrot=:U]{line I}
  \ncdiagg[lineAngle=-160]{->}{C}{D}
  \ncput*[nrot=:U]{line II}
  \ncdiagg[lineAngle=-160]{->}{E}{F}
  \ncput*[nrot=:U]{line III}}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(4,6)
  \psset{linecolor=black}
  \cnode*(0,0){2pt}{A}%
  \cnode*(0.25,0){2pt}{C}%
  \cnode*(0.5,0){2pt}{E}%
  \cnode*(0.75,0){2pt}{G}%
  \cnode*(2,4){2pt}{B}%
  \cnode*(2.5,4.5){2pt}{D}%
  \cnode*(3,5){2pt}{F}%
  \cnode*(3.5,5.5){2pt}{H}%
  {\psset{arrowscale=2,linearc=0.2,linecolor=red,armA=0.5, angleA=90}
  \pcdiagg[lineAngle=20]{->}(A)(B)
  \pcdiagg[lineAngle=20]{->}(C)(D)
  \pcdiagg[lineAngle=20]{->}(E)(F)
  \pcdiagg[lineAngle=20]{->}(G)(H)}
\end{pspicture}
\end{LTXexample}

The only catch for \verb+\ncdiagg+ is, that you need the right value for \verb+lineAngle+.
If the node connection is on the wrong side
of the second node, then choose the corresponding angle, e.g.: if $20$ is wrong then take
$-160$, the corresponding to $180$.


\begin{LTXexample}[width=4cm]
\begin{pspicture}(4,1.5)
  \circlenode{a}{A}
  \rput[l](3,1){\rnode{b}{H}}
  \ncdiagg[lineAngle=60,angleA=180,armA=.5,nodesepA=3pt,linecolor=blue]{b}{a}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=4cm]
\begin{pspicture}(4,1.5)
  \circlenode{a}{A}
  \rput[l](3,1){\rnode{b}{H}}
  \ncdiagg[lineAngle=60,armA=.5,nodesepB=3pt,linecolor=blue]{a}{b}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=4cm]
\begin{pspicture}(4,1.5)
  \circlenode{a}{A}
  \rput[l](3,1){\rnode{b}{H}}
  \ncdiagg[lineAngle=-120,armA=.5,nodesepB=3pt,linecolor=blue]{a}{b}
\end{pspicture}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\section{\CMD{ncbarr}}
%--------------------------------------------------------------------------------------
This has the same behaviour as \verb+ncbar+, but has 5 segments and all are
horizontal ones. This is the reason why \verb+angleA+ must be $0$ or alternative $180$.
All other values are set to $0$ by the macro. The intermediate horizontal line is
symmetrical to the distance of the two nodes.


\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=2}%
\circlenode{X}{X}\\[1cm]
\circlenode{Y}{Y}
\ncbarr[angleA=0,arrows=->,arrowscale=2]{X}{Y}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=2}%
\ovalnode{X}{Xxxxx}\\[1cm]
\circlenode{Y}{Yyyy}
\ncbarr[angleA=180,arrows=->,arrowscale=2,linecolor=red]{X}{Y}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\psset{arrowscale=2}%
\ovalnode{X}{Xxxxx}\\[1cm]
\circlenode{Y}{Yyyy}
\ncbarr[angleA=20,arm=1cm,arrows=->,arrowscale=2]{X}{Y}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\section{\CMD{psRelNode}}
%--------------------------------------------------------------------------------------
With this macro it is possible to put a node relative to a given line. Parameter are
the angle and the length factor:
\begin{verbatim}
\psRelNode(<P0>)(<P1>){<length factor>}{<end node name>}
\psRelLine[<options>](<P0>)(<P1>){<length factor>}{<end node name>}
\end{verbatim}

The length factor depends to the distance of $\overline{P_0P_1}$ and the end node name must
be a valid nodename and shouldn't contain any of the special PostScript characters. There are
two valid options:

\begin{tabularx}{\linewidth}{l|l|X}
name & default & meaning\\\hline
\verb|angle| & $0$ & angle between the given line $\overline{P_0P_1}$ and the new one
$\overline{P_0P_{endNode}}$\tabularnewline
\verb+trueAngle+ & false & defines whether the angle depends to the seen line or to the
mathematical one, which respect the scaling factors \verb+xunit+ and \verb+yunit+.
\end{tabularx}

\begin{LTXexample}[width=7cm]
\begin{pspicture}(7,6)
  \psgrid[gridwidth=0pt,gridcolor=gray,gridlabels=0pt,subgriddiv=2]
  \pnode(3,3){A}\pnode(4,2){B}
  \psline[nodesep=-3,linewidth=0.5pt](A)(B)
  \multido{\iA=0+30}{12}{%
    \psRelNode[angle=\iA](A)(B){2}{C}%
    \qdisk(C){2pt}
    \uput[0](C){\iA}}  
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\section{\CMD{psRelLine}}
%--------------------------------------------------------------------------------------
With this macro it is possible to plot lines relative to a given one. Parameter are
the angle and the length factor:
\begin{verbatim}
\psRelLine(<P0>)(<P1>){<length factor>}{<end node name>}
\psRelLine{<arrows>}(<P0>)(<P1>){<length factor>}{<end node name>}
\psRelLine[<options>](<P0>)(<P1>){<length factor>}{<end node name>}
\psRelLine[<options>]{<arrows>}(<P0>)(<P1>){<length factor>}{<end node name>}
\end{verbatim}

The length factor depends to the distance of $\overline{P_0P_1}$ and the end node name must
be a valid nodename and shouldn't contain any of the special PostScript characters. There are
two valid options which are described in the forgoing section for \verb+\psRelNode+.

The following two figures show the same, the first one with a scaling different to $1:1$,
this is the reason why the end points are on an ellipse and not on a circle like in the
second figure.

\begin{LTXexample}[width=5cm]
\psset{yunit=2,xunit=1}
\begin{pspicture}(-2,-2)(3,2)
\psgrid[subgriddiv=2,subgriddots=10,gridcolor=lightgray]
\pnode(-1,0){A}\pnode(3,2){B}
\psline[linecolor=red](A)(B)
\psRelLine[linecolor=blue,angle=30](-1,0)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=blue,angle=-30](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=90](-1,0)(3,2){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=-90](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(-2,-2)(3,2)
\psgrid[subgriddiv=2,subgriddots=10,gridcolor=lightgray]
\pnode(-1,0){A}\pnode(3,2){B}
\psline[linecolor=red](A)(B)
\psarc[linestyle=dashed](A){2.23}{-90}{135}
\psRelLine[linecolor=blue,angle=30](-1,0)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=blue,angle=-30](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=90](-1,0)(3,2){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=-90](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\end{pspicture}
\end{LTXexample}

\medskip
The following figure has also a different scaling, but has set the option \verb+trueAngle+,
all angles depends to what "you see".

\begin{LTXexample}[width=6.5cm]
\psset{yunit=2,xunit=1}
\begin{pspicture}(-3,-1)(3,2)\psgrid[subgridcolor=lightgray]
\pnode(-1,0){A}\pnode(3,2){B}
\psline[linecolor=red](A)(B)
\psarc(A){2.83}{-45}{135}
\psRelLine[linecolor=blue,angle=30,trueAngle](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=blue,angle=-30,trueAngle](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=90,trueAngle](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\psRelLine[linecolor=magenta,angle=-90,trueAngle](A)(B){0.5}{EndNode}
\qdisk(EndNode){2pt}
\end{pspicture}
\end{LTXexample}

\medskip
Two examples with using \verb+\multido+ to show the behaviour of the options \verb+trueAngle+
and \verb+angle+.

\medskip
\begin{LTXexample}[width=8cm]
\psset{yunit=4,xunit=2}
\begin{pspicture}(-1,0)(3,2)\psgrid[subgridcolor=lightgray]
\pnode(-1,0){A}\pnode(1,1){B}
\psline[linecolor=red](A)(3,2)
\multido{\iA=0+10}{36}{%
  \psRelLine[linecolor=blue,angle=\iA](B)(A){-0.5}{EndNode}
  \qdisk(EndNode){2pt}
}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=8cm]
\psset{yunit=4,xunit=2}
\begin{pspicture}(-1,0)(3,2)\psgrid[subgridcolor=lightgray]
\pnode(-1,0){A}\pnode(1,1){B}
\psline[linecolor=red](A)(3,2)
\multido{\iA=0+10}{36}{%
  \psRelLine[linecolor=magenta,angle=\iA,trueAngle]{->}(B)(A){-0.5}{EndNode}
}
\end{pspicture}
\end{LTXexample}

\begin{center}
\bgroup
\psset{xunit=0.75\linewidth,yunit=0.75\linewidth,trueAngle}%
\begin{pspicture}(1,0.6)%\psgrid
  \pnode(.3,.35){Vk} \pnode(.375,.35){D} \pnode(0,.4){DST1} \pnode(1,.18){DST2}
  \pnode(0,.1){A1}   \pnode(1,.31){A1}
  { \psset{linewidth=.02,linestyle=dashed,linecolor=gray}%
    \pcline(DST1)(DST2) % <- Druckseitentangente
    \pcline(A2)(A1) % <- Anstr"omrichtung
    \lput*{:U}{\small Anstr"omrichtung $v_{\infty}$} }%
  \psIntersectionPoint(A1)(A2)(DST1)(DST2){Hk}
  \pscurve(Hk)(.4,.38)(Vk)(.36,.33)(.5,.32)(Hk)
  \psParallelLine[linecolor=red!75!green,arrows=->,arrowscale=2](Vk)(Hk)(D){.1}{FtE}
  \psRelLine[linecolor=red!75!green,arrows=->,arrowscale=2,angle=90](D)(FtE){4}{Fn}% why "4"?
  \psParallelLine[linestyle=dashed](D)(FtE)(Fn){.1}{Fnr1}
  \psRelLine[linestyle=dashed,angle=90](FtE)(D){-4}{Fnr2} % why "-4"?
  \psline[linewidth=1.5pt,arrows=->,arrowscale=2](D)(Fnr2)
  \psIntersectionPoint(D)([nodesep=2]D)(Fnr1)([offset=-4]Fnr1){Fh}
  \psIntersectionPoint(D)([offset=2]D)(Fnr1)([nodesep=4]Fnr1){Fv}
  \psline[linecolor=blue,arrows=->,arrowscale=2](D)(Fh)
  \psline[linecolor=blue,arrows=->,arrowscale=2](D)(Fv)
  \psline[linestyle=dotted](Fh)(Fnr1)  \psline[linestyle=dotted](Fv)(Fnr1)
  \uput{.1}[0](Fh){\blue $F_{H}$}   \uput{.1}[180](Fv){\blue $F_{V}$}
  \uput{.1}[-45](Fnr1){$F_{R}$}     \uput{.1}[90](Fn){\color{red!75!green}$F_{N}$}
  \uput{.25}[-90](FtE){\color{red!75!green}$F_{T}$}
\end{pspicture}
\egroup
\end{center}
\begin{lstlisting}
\psset{xunit=0.75\linewidth,yunit=0.75\linewidth,trueAngle}%
\end{center}
\begin{pspicture}(1,0.6)%\psgrid
  \pnode(.3,.35){Vk} \pnode(.375,.35){D} \pnode(0,.4){DST1} \pnode(1,.18){DST2}
  \pnode(0,.1){A1}   \pnode(1,.31){A1}
  { \psset{linewidth=.02,linestyle=dashed,linecolor=gray}%
    \pcline(DST1)(DST2) % <- Druckseitentangente
    \pcline(A2)(A1) % <- Anstr"omrichtung
    \lput*{:U}{\small Anstr"omrichtung $v_{\infty}$} }%
  \psIntersectionPoint(A1)(A2)(DST1)(DST2){Hk}
  \pscurve(Hk)(.4,.38)(Vk)(.36,.33)(.5,.32)(Hk)
  \psParallelLine[linecolor=red!75!green,arrows=->,arrowscale=2](Vk)(Hk)(D){.1}{FtE}
  \psRelLine[linecolor=red!75!green,arrows=->,arrowscale=2,angle=90](D)(FtE){4}{Fn}% why "4"?
  \psParallelLine[linestyle=dashed](D)(FtE)(Fn){.1}{Fnr1}
  \psRelLine[linestyle=dashed,angle=90](FtE)(D){-4}{Fnr2} % why "-4"?
  \psline[linewidth=1.5pt,arrows=->,arrowscale=2](D)(Fnr2)
  \psIntersectionPoint(D)([nodesep=2]D)(Fnr1)([offset=-4]Fnr1){Fh}
  \psIntersectionPoint(D)([offset=2]D)(Fnr1)([nodesep=4]Fnr1){Fv}
  \psline[linecolor=blue,arrows=->,arrowscale=2](D)(Fh)
  \psline[linecolor=blue,arrows=->,arrowscale=2](D)(Fv)
  \psline[linestyle=dotted](Fh)(Fnr1)  \psline[linestyle=dotted](Fv)(Fnr1)
  \uput{.1}[0](Fh){\blue $F_{H}$}   \uput{.1}[180](Fv){\blue $F_{V}$}
  \uput{.1}[-45](Fnr1){$F_{R}$}     \uput{.1}[90](Fn){\color{red!75!green}$F_{N}$}
  \uput{.25}[-90](FtE){\color{red!75!green}$F_{T}$}
\end{pspicture}
\end{lstlisting}


%--------------------------------------------------------------------------------------
\section{\CMD{psParallelLine}}
%--------------------------------------------------------------------------------------
With this macro it is possible to plot lines relative to a given one, which is parallel. There is no special parameter here.
\begin{verbatim}
\psParallelLine(<P0>)(<P1>)(<P2>){<length>}{<end node name>}
\psParallelLine{<arrows>}(<P0>)(<P1>)(<P2>){<length>}{<end node name>}
\psParallelLine[<options>](<P0>)(<P1>)(<P2>){<length>}{<end node name>}
\psParallelLine[<options>]{<arrows>}(<P0>)(<P1>)(<P2>){<length>}{<end node name>}
\end{verbatim}

The line starts at $P_2$, is parallel to $\overline{P_0P_1}$ and the length of this
parallel line depends to the length factor. The end node name must
be a valid nodename and shouldn't contain any of the special PostScript characters.

\begin{LTXexample}
\begin{pspicture*}(-5,-4)(5,3.5)
  \psgrid[subgriddiv=0,griddots=5]
  \pnode(2,-2){FF}\qdisk(FF){1.5pt}
  \pnode(-5,5){A}\pnode(0,0){O}
  \multido{\nCountA=-2.4+0.4}{9}{%
    \psParallelLine[linecolor=red](O)(A)(0,\nCountA){9}{P1}
    \psline[linecolor=red](0,\nCountA)(FF)
    \psRelLine[linecolor=red](0,\nCountA)(FF){9}{P2}
  }
  \psline[linecolor=blue](A)(FF)
  \psRelLine[linecolor=blue](A)(FF){5}{END1}
  \psline[linewidth=2pt,arrows=->](2,0)(FF)
\end{pspicture*}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\section{\CMD{psIntersectionPoint}}
%--------------------------------------------------------------------------------------
This macro calculates the intersection point of two lines, given by the four coordinates.
There is no special parameter here.
\begin{verbatim}
\psIntersectionPoint(<P0>)(<P1>)(<P2>)(<P3>){<node name>}
\end{verbatim}

\begin{LTXexample}[width=5.5cm]
\psset{unit=0.5cm}
\begin{pspicture}(-5,-4)(5,5)
  \psaxes{->}(0,0)(-5,-4)(5,5)
  \psline[linecolor=red,linewidth=2pt](-5,-1)(5,5)
  \psline[linecolor=blue,linewidth=2pt](-5,3)(5,-4)
  \qdisk(-5,-1){3pt}\uput[-90](-5,-1){A}
  \qdisk(5,5){3pt}\uput[-90](5,5){B}
  \qdisk(-5,3){3pt}\uput[-90](-5,3){C}
  \qdisk(5,-4){3pt}\uput[-90](5,-4){D}
  \psIntersectionPoint(-5,-1)(5,5)(-5,3)(5,-4){IP}
  \qdisk(IP){5pt}\uput{0.3}[90](IP){IP}
  \psline[linestyle=dashed](IP|0,0)(IP)(0,0|IP)
\end{pspicture}
\end{LTXexample}

\clearpage
%--------------------------------------------------------------------------------------
\section{\CMD{psLNode} and \CMD{psLCNode}}
%--------------------------------------------------------------------------------------
\CMD{psLNode} interpolates the Line $\overline{AB}$ by the given value and sets a node at this
point. The syntax is
%
\begin{verbatim}
\psLNode(P1)(P2){value}{Node name}
\end{verbatim}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(5,5)
\psgrid[subgriddiv=0,griddots=10]
\psset{linecolor=red}
\psline{o-o}(1,1)(5,5)
\psLNode(1,1)(5,5){0.75}{PI}
\qdisk(PI){4pt}
\psset{linecolor=blue}
\psline{o-o}(4,3)(2,5)
\psLNode(4,3)(2,5){-0.5}{PII}
\qdisk(PII){4pt}
\end{pspicture}
\end{LTXexample}


\bigskip
The \CMD{psLCNode} macro builds the linear combination of the two given vectors and stores the end of
the new vector as a node. All vectors start at $(0,0)$, so a \verb+\rput+ maybe appropriate.
 The syntax is
%
\begin{verbatim}
\psLCNode(P1){value 1}(P2){value 2}{Node name}
\end{verbatim}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(5,5)
\psgrid[subgriddiv=0,griddots=10]
\psset{linecolor=black}
\psline[linestyle=dashed]{->}(3,1.5)
\psline[linestyle=dashed]{->}(0.375,1.5)
\psset{linecolor=red}
\psline{->}(2,1)\psline{->}(0.5,2)
\psLCNode(2,1){1.5}(0.5,2){0.75}{PI}
\psline[linewidth=2pt]{->}(PI)
\psset{linecolor=black}
\psline[linestyle=dashed](3,1.5)(PI)
\psline[linestyle=dashed](0.375,1.5)(PI)
\end{pspicture}
\end{LTXexample}

\clearpage

%--------------------------------------------------------------------------------------
\section{\CMD{nlput} and \CMD{psLDNode}}
%--------------------------------------------------------------------------------------
\CMD{ncput} allows to set a label relative to the first node of the last
node connection. With \CMD{nlput} this can be done absolute to a given
node. The syntax is different to the other node connection makros. It uses
internally the macro \CMD{psLDNode} which places a node absolute to 
two given points, starting from the first one.

\begin{verbatim}
\nlput[options](A)(B){distance}{text}
\psLDNode[options](A)(B){distance}{node name}
\end{verbatim}


\begin{LTXexample}[width=5cm]
\begin{pspicture}(5,2)
\pnode(0,0){A}
\pnode(5,2){B}
\ncline{A}{B}
\psLDNode(A)(B){1.5cm}{KN}\qdisk(KN){2pt}
\nlput[nrot=:U](A)(B){1cm}{Test}
\nlput[nrot=:D](A)(B){2cm}{Test}
\nlput[nrot=:U](A)(B){3cm}{Test}
\nlput(A)(B){4cm}{Test}
\end{pspicture}
\end{LTXexample}




\clearpage
%--------------------------------------------------------------------------------------
\part{\texttt{pst-plot}}
%--------------------------------------------------------------------------------------
\section{ New options}
%--------------------------------------------------------------------------------------
The option \verb+tickstyle=full|top|bottom+ is no more working in the \verb+pstricks-add+
package, because everything can be set by the \verb+ticksize+ option. When using the
\verb+comma+ or \verb+trigLabels+ option, the macros \verb+\pshlabel+ and \verb+\psvlabel+
shouldn't be redefined, because the package does it itself in these cases.
{
\ttfamily
\begin{longtable}{lll}
\caption{All new parameters for \texttt{pst-plot}}\\[-5pt]
\textrm{Name}         & \textrm{Type}  & \textrm{Default}\\\hline
\endfirsthead
\textrm{Name}         & \textrm{Type}  & \textrm{Default}\\\hline
\endhead
labelFontSize	      & <fontsize macro>    & \{\} \\
algebraic             & false|true & false\\ %ok
comma                 & false|true & false\\ %ok
xAxis                 & false|true & true\\%ok
yAxis                 & false|true & true\\%ok
xyAxes                & false|true & true\\%ok
xDecimals            & <number> or empty  & \{\}\\%ok
yDecimals            & <number> or empty  & \{\}\\%ok
xyDecimals            & <number> or empty   & \{\}\\%ok
%xLabel               & <anything> & \{\}\\%ok
%yLabel               & <anything> & \{\}\\%ok
%xyLabel               & <anything> & \{\}\\%ok
%tickstyle            & full|top|bottom & full\\%ok
ticks                & <all|x|y|none>   & all\\%ok
labels               & <all|x|y|none>   & all\\%ok
subticks             & <number>         & 0\\
xsubticks            & <number>         & 0\\
ysubticks            & <number>         & 0\\
ticksize             & <length [length]>         & -4pt 4pt\\
subticksize          & <number>         & 0.75\\
tickwidth            & <length>         & 0.5\verb+\pslinewidth+\\
subtickwidth         & <length>         & 0.25\verb+\pslinewidth+\\
tickcolor            & <color>          & black\\
xtickcolor           & <color>          & black\\
ytickcolor           & <color>          & black\\
subtickcolor         & <color>          & darkgray\\
xsubtickcolor        & <color>          & darkgray\\
ysubtickcolor        & <color>          & darkgray\\
ticklinestyle        & solid | dashed | dotted | none & solid\\
subticklinestyle        & solid | dashed | dotted | none & solid\\
xlabelFactor         & <anything> & \{\textbackslash\@ empty\}\\
ylabelFactor         & <anything> & \{\textbackslash\@ empty\}\\
xlogBase              & <number> or empty   & \{\}\\
ylogBase              & <number> or empty   & \{\}\\
xylogBase              & <number> or empty   & \{\}\\
logLines             & <none|x|y|all>   & none\\
ignoreLines          & <number>          & 0\\
nStep                & <number>          & 1\\
nStart               & <number>          & 0\\
nEnd                 & <number> or empty          & \{\}\\
xStep                & <number>          & 0\\
yStep               & <number>          & 0\\
xStart               & <number> or empty         & \{\}\\
yStart               & <number> or empty         & \{\}\\
xEnd               & <number> or empty         & \{\}\\
yEnd               & <number> or empty         & \{\}\\
plotNo            & <number>          & 1\\
plotNoMax         & <number>          & 1\\
xAxisLabel        & <anything> & \{\textbackslash\@ empty\}\\
yAxisLabel        & <anything> & \{\textbackslash\@ empty\}\\
xAxisLabelPos     & <(x,y)> or empty & \{\textbackslash\@ empty\}\\
yAxisLabelPos     & <(x,y)> or empty & \{\textbackslash\@ empty\}\\
llx               & <length>  & 0pt\\
lly               & <length>  & 0pt\\
urx               & <length>  & 0pt\\
ury               & <length>  & 0pt\\
polarplot         & false|true    & false\\
trigLabels        & false|true    & false\\
trigLabelBase        & <number>    & 0\\
ChangeOrder        & false|true    & false\\
\end{longtable}
}


\clearpage
%--------------------------------------------------------------------------------------
\subsection{Changing the label font size with \texttt{labelFontSize}}
%--------------------------------------------------------------------------------------

This option sets the horizontal \textbf{and} vertical font size for the labels.
It will be overwritten when another package or a user defines
\begin{lstlisting}
\def\pshlabel#1{...}
\def\psvlabel#1{...}
\end{lstlisting}

\begin{LTXexample}[width=6cm]
\begin{pspicture}(-0.25,-0.25)(5,2.25)
\psaxes{->}(5,2.25)
\end{pspicture}\\[20pt]
\begin{pspicture}(-0.25,-0.25)(5,2.25)
\psaxes[labelFontSize=\small]{->}(5,2.25)
\end{pspicture}\\[20pt]
\begin{pspicture}(-0.25,-0.25)(5,2.25)
\psaxes[labelFontSize=\footnotesize]{->}(5,2.25)
\end{pspicture}\\[20pt]
\begin{pspicture}(-0.25,-0.25)(5,2.25)
\psaxes[labelFontSize=\tiny]{->}(5,2.25)
\end{pspicture}%
\end{LTXexample}


\clearpage

%--------------------------------------------------------------------------------------
\subsection[\texttt{algebraic}]{\texttt{algebraic}\footnote{This part is adapted from the package \texttt{pst-eqdf}, written by Dominique Rodriguez.}}
%--------------------------------------------------------------------------------------
By default the function of \verb+\psplot+ has to be described in Reversed Polish Notation.
The option \verb+algebraic+ allows to do this in the common algebraic notation. E.g.:

\begin{tabular}{l|l}
RPN & algebraic\\\hline
\verb+x ln+ & \verb+ln(x)+\\
\verb+x cos 2.71 x neg 10 div exp mul+ & \verb+cos(x)*2.71^(-x/10)+\\
\verb+1 x div cos 4 mul+ & \verb+4*cos(1/x)+\\
\verb+t cos t sin+ & \verb+cos(t)|sin(t)+
\end{tabular}

Setting the option \verb$algebraic$ to \verb$true$, allow the user to describe all
expression to be written in the classical algebraic notation (infix notation). The four arithmetic
operarions are obviously defined \verb$+-*/$, and also the exponential operator
\verb$^$. The natural priorities are used : $3+4\times 5^5=3+(4\times (5^5))$, and by default
the computation is done from left to right. The following functions are defined :

\medskip
\begin{tabular}{ll}
\verb$sin$, \verb$cos$, \verb$tan$, \verb$acos$, \verb$asin$ & in radians\\
\verb$log$, \verb$ln$\\
\verb$ceiling$, \verb$floor$, \verb$truncate$, \verb$round$\\
\verb$sqrt$ & square root\\
\verb$abs$ & absolute value\\
\verb$fact$ & for the factorial\\
\verb$Sum$ & for building sums\\
\verb$IfTE$ & for an easy case structure
\end{tabular}

\medskip
These options can be used with \textbf{all} plot macros.

{\bfseries Using the option \verb+algebraic+ implies that all angles have to be used in the
radian unit! }

For the \verb+\parametricplot+ the two parts must be divided by the \verb+|+ character:

\begin{LTXexample}[width=2cm]
\begin{pspicture}(-0.5,-0.5)(0.5,0.5)
\parametricplot[algebraic,linecolor=red]{-3.14}{3.14}{cos(t)|sin(t)}
\end{pspicture}
\end{LTXexample}


\clearpage
\bigskip
%\begin{LTXexample}[pos=t]
\psset{lly=-0.5cm}
\psgraph(-10,-3)(10,2){\linewidth}{6cm}
  \psset{algebraic=true, plotpoints=101}
  \psplot[linecolor=yellow, linewidth=4\pslinewidth]{-10}{10}{2*sin(x)}%
  \psplot[linecolor=red, showpoints=true]{-10}{10}{2*sin(x)}
\endpsgraph
%\end{LTXexample}

\bigskip
\begin{lstlisting}
\psset{lly=-0.5cm}
\psgraph(-10,-3)(10,2){\linewidth}{6cm}
  \psset{algebraic=true, plotpoints=101}
  \psplot[linecolor=yellow, linewidth=4\pslinewidth]{-10}{10}{2*sin(x)}%
  \psplot[linecolor=red, showpoints=true]{-10}{10}{2*sin(x)}
\endpsgraph
\end{lstlisting}


\bigskip
%\begin{LTXexample}[pos=t]
\bgroup
\psset{lly=-0.5cm}
\psgraph(0,-5)(18,3){15cm}{5cm}
  \psset{algebraic,plotpoints=501}
  \psplot[linecolor=yellow, linewidth=4\pslinewidth]{0.01}{18}{ln(x)}%
  \psplot[linecolor=red]{0.01}{18}{ln(x)}
  \psplot[linecolor=yellow,linewidth=4\pslinewidth]{0}{18}{3*cos(x)*2.71^(-x/10)}
  \psplot[linecolor=blue,showpoints=true,plotpoints=51]{0}{18}{3*cos(x)*2.71^(-x/10)}
\endpsgraph
\egroup
%\end{LTXexample}


\bigskip
\begin{lstlisting}
\psset{lly=-0.5cm}
\psgraph(0,-5)(18,3){15cm}{5cm}
  \psset{algebraic,plotpoints=501}
  \psplot[linecolor=yellow, linewidth=4\pslinewidth]{0.01}{18}{ln(x)}%
  \psplot[linecolor=red]{0.01}{18}{ln(x)}
  \psplot[linecolor=yellow,linewidth=4\pslinewidth]{0}{18}{3*cos(x)*2.71^(-x/10)}
  \psplot[linecolor=blue,showpoints=true,plotpoints=51]{0}{18}{3*cos(x)*2.71^(-x/10)}
\endpsgraph
\end{lstlisting}



%--------------------------------------------------------------------------------------
\subsubsection{Using the \texttt{Sum} function}
%--------------------------------------------------------------------------------------

Syntax: \verb+Sum(<index name>,<start>,<step>,<end>,<function>)+

Let's plot the first development of cosine with polynomials:
$\displaystyle\sum_{n=0}^{+\infty}\frac{(-1)^nx^{2n}}{n!}$.

\begin{center}
\bgroup
\psset{algebraic=true,plotpoints=501, yunit=3}
\def\getColor#1{\ifcase#1 black\or red\or magenta\or yellow\or green\or Orange\or blue\or
  DarkOrchid\or BrickRed\or Rhodamine\or OliveGreen\fi}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psclip{\psframe(-7,-1.5)(7,1.5)}
    \psplot{-7}{7}{cos(x)}
    \multido{\n=1+1}{10}{%
      \psplot[linewidth=1pt,linecolor=\getColor{\n}]{-7}{7}{%
         Sum(ijk,0,1,\n,(-1)^ijk*x^(2*ijk)/fact(2*ijk))}}
   \endpsclip
  \psaxes(0,0)(-7,-1.5)(7,1.5)
\end{pspicture}
\egroup
\end{center}
\begin{lstlisting}
\psset{algebraic=true,plotpoints=501, yunit=3}
\def\getColor#1{\ifcase#1 black\or red\or magenta\or yellow\or green\or Orange\or blue\or
  DarkOrchid\or BrickRed\or Rhodamine\or OliveGreen\fi}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psclip{\psframe(-7,-1.5)(7,1.5)}
    \psplot{-7}{7}{cos(x)}
    \multido{\n=1+1}{10}{%
      \psplot[linewidth=1pt,linecolor=\getColor{\n}]{-7}{7}{%
         Sum(ijk,0,1,\n,(-1)^ijk*x^(2*ijk)/fact(2*ijk))}}
   \endpsclip
  \psaxes(0,0)(-7,-1.5)(7,1.5)
\end{pspicture}
\end{lstlisting}

\clearpage
%--------------------------------------------------------------------------------------
\subsubsection{Using the \texttt{IfTE} function}
%--------------------------------------------------------------------------------------
Syntax: \verb+IfTE(<condition>,<true part>,<false part>)+

Nesting of several \verb+IfTE+ are possible and seen in the following examples.
A classical example is a piece wise linear function.

\begin{center}
\begin{pspicture}(-7.5,-2.5)(7.5,6)\psgrid[subgriddiv=1,gridcolor=lightgray]
  \psset{algebraic=true, plotpoints=21,linewidth=2pt}
  \psplot[linecolor=blue]{-7.5}{7.5}{IfTE(x<-6,8+x,IfTE(x<0,-x/3,IfTE(x<3,2*x,9-x)))}
  \psplot[linecolor=red, plotpoints=101]{-7.5}{7.5}{%
      IfTE(2*x<-2^2*sqrt(9),7+x,IfTE(x<0,x^2/18-1,IfTE(x<3,2*x^2/3-1,8-x)))}%
\end{pspicture}
\end{center}


\begin{lstlisting}
\begin{pspicture}(-7.5,-2.5)(7.5,6)\psgrid[subgriddiv=1,gridcolor=lightgray]
  \psset{algebraic=true, plotpoints=21,linewidth=2pt}
  \psplot[linecolor=blue]{-7.5}{7.5}{IfTE(x<-6,8+x,IfTE(x<0,-x/3,IfTE(x<3,2*x,9-x)))}
  \psplot[linecolor=red, plotpoints=101]{-7.5}{7.5}{%
      IfTE(2*x<-2^2*sqrt(9),7+x,IfTE(x<0,x^2/18-1,IfTE(x<3,2*x^2/3-1,8-x)))}%
\end{pspicture}
\end{lstlisting}

When you program a piece-wise defined function you must take care that a 
plotting point must be put on each point where the description changes. Use \verb+showpoints=true+ to
see what's going on, when there is a problem. You are on the save side, when you choose a
big number for \verb+plotpoints+.

\clearpage


\begin{center}
\begin{pspicture}[showgrid=true](-8,-8)(8,8)
  \psset{plotpoints=1000,linewidth=1pt}
  \psplot[algebraic]{-8}{8}{ceiling(x)}
  \psplot[algebraic, linecolor=yellow]{-8}{8}{rand/(2^31-1)+x}
  \psplot[algebraic, linecolor=red]{-8}{8}{floor(x)}
  \psplot[algebraic, linecolor=blue]{-8}{8}{round(x)}
  \psplot[algebraic, linecolor=green]{-8}{8}{truncate(x)}
  \psplot[algebraic, linecolor=cyan]{-8}{8}{div(mul(4,x),7)}
  \psplot[algebraic, linecolor=gray]{-8}{8}{abs(x)+abs(x-3)-abs(5-5*x/7)}
  \psplot[algebraic, linecolor=gray]{-8}{8}{abs(3*cos(x)+1)}
  \psplot[algebraic, linecolor=magenta]{-8}{8}{floor(8*cos(x))}
\end{pspicture}
\end{center}

\begin{lstlisting}
\begin{pspicture}[showgrid=true](-8,-8)(8,8)
  \psset{plotpoints=1000,linewidth=1pt}
  \psplot[algebraic, linecolor=yellow]{-8}{8}{rand/(2^31-1)+x}
  \psplot[algebraic]{-8}{8}{ceiling(x)}
  \psplot[algebraic, linecolor=red]{-8}{8}{floor(x)}
  \psplot[algebraic, linecolor=blue]{-8}{8}{round(x)}
  \psplot[algebraic, linecolor=green]{-8}{8}{truncate(x)}
  \psplot[algebraic, linecolor=cyan]{-8}{8}{div(mul(4,x),7)}
  \psplot[algebraic, linecolor=gray]{-8}{8}{abs(x)+abs(x-3)-abs(5-5*x/7)}
  \psplot[algebraic, linecolor=gray]{-8}{8}{abs(3*cos(x)+1)}
  \psplot[algebraic, linecolor=magenta]{-8}{8}{floor(8*cos(x))}
\end{pspicture}
\end{lstlisting}




%--------------------------------------------------------------------------------------
\subsection{\texttt{comma}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
comma=false|true
\end{verbatim}
Setting this option to true gives labels with a comma as a decimal separator instead
of the dot. \verb|comma| and \verb|comma=true| is the same.

\resetOptions
\medskip
\begin{LTXexample}[width=5.5cm]
\begin{pspicture}(-0.5,-0.5)(5,5.5)
\psaxes[Dx=1.5,Dy=0.5,comma]{->}(5,5)
\psplot[linecolor=red,linewidth=3pt]{0}{4.5}%
   {x 180 mul 1.52 div cos 2 mul 2.5 add}
\psline[linestyle=dashed](0,2.5)(4.5,2.5)
\end{pspicture}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\subsection{\texttt{xyAxes}, \texttt{xAxis} and \texttt{yAxis}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
xyAxes=true|false
xAxis=true|false
yAxis=true|false
\end{verbatim}

Sometimes there is only a need for one axis with ticks. In this case you can set one
of the following options to false. The \verb+xyAxes+ makes only sense, when you want
to set both, x and y to true with only one command again to the default, because with
\verb+xyAxes=false+ you get nothing with the \verb+psaxes+ macro.


\resetOptions%
\begin{LTXexample}
\begin{pspicture}(5,1)
\psaxes[yAxis=false,linecolor=blue]{->}(0,0.5)(5,0.5)
\end{pspicture}
\begin{pspicture}(1,5)
\psaxes[xAxis=false,linecolor=red]{->}(0.5,0)(0.5,5)
\end{pspicture}
\begin{pspicture}(1,5)
\psaxes[xAxis=false,linecolor=red]{->}(0.5,0)(0.5,5)
\end{pspicture}\hspace{2em}
\begin{pspicture}(1,5)
\psaxes[xAxis=false,linecolor=red,labelsep=-20pt]{->}(0.5,0)(0.5,5)
\end{pspicture}%
\begin{pspicture}(1,5)
\psaxes[xAxis=false,linecolor=red]{->}(0.5,0)(0.501,5)
\end{pspicture}%
\end{LTXexample}

As seen in the example, a single y axis gets the labels on the right side. This can be
changed in two ways, first with the option \verb+labelsep+ and second with a very
short and therefore invisible x-axis (right example). 

%--------------------------------------------------------------------------------------
\subsection{\texttt{xyDecimals}, \texttt{xDecimals} and \texttt{yDecimals}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
xyDecimals=<number>
xDecimals=<any>
yDecimals=<any>
\end{verbatim}
By default the labels of the axes get numbers with or without decimals, just depending to the
numbers. With these options \verb|??Decimals| it is possible to determine the decimals,
where the option \verb|xyDecimals| sets this identical for both axes.
The default setting \verb|{}| means, that you'll get the standard behaviour.


\begin{LTXexample}[width=6cm]
\begin{pspicture}(-1.5,-0.5)(5,3.75)
  \psaxes[xyDecimals=2]{->}(0,0)(4.5,3.5)
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}
\psset{xunit=10cm,yunit=0.01cm,labelFontSize=\footnotesize}
\begin{pspicture}(-0.3,-150)(1.5,550.0)
  \psaxes[Dx=0.25,Dy=100,ticksize=-4pt 0,comma=true,%
    xDecimals=3,yDecimals=1]{->}(0,0)(0,-100)(1.4,520)
\end{pspicture}
\end{LTXexample}

\resetOptions

\iffalse

%--------------------------------------------------------------------------------------
\subsection{\texttt{tickstyle}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
tickstyle=full|bottom|top
\end{verbatim}

This option is already in the \verb+pst-plot+ package and only mentioned here for
some completness.

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[tickstyle=bottom,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}\\[0.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[tickstyle=bottom,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticksize=0 4pt,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}\\[0.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticksize=0 4pt,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}


The \verb+tickstyle+ option changes the position of the labels by default.
If you want the labels on the other side of an axis, then use the options
\verb+labelsep+ or set the ticks with \verb+ticksize+.


\fi


%--------------------------------------------------------------------------------------
\subsection{\texttt{ticks}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
ticks=all|x|y|none
\end{verbatim}

This option is also already in the \verb+pst-plot+ package and only mentioned here for
some completness.

\begin{LTXexample}[width=3.5cm]
\psset{ticksize=6pt}
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=all,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=y,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=x,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=none,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{labels}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
labels=all|x|y|none
\end{verbatim}

This option is also already in the \verb+pst-plot+ package and only mentioned here for
some completness.

\begin{LTXexample}[width=3.5cm]
\psset{ticksize=6pt}
\begin{pspicture}(-1,-1)(2,2)
\psaxes[labels=all,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[labels=y,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[labels=x,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[labels=none,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{ticksize}, \texttt{xticksize}, \texttt{yticksize}}
%--------------------------------------------------------------------------------------

With this new option the recent \verb+tickstyle+ option of \verb+pst-plot+ is obsolete
and no more supported by \verb+pstricks-add+.

Syntax:
\begin{verbatim}
ticksize=value[unit]
ticksize=value[unit] value[unit]
xticksize=value[unit]
xticksize=value[unit] value[unit]
yticksize=value[unit]
yticksize=value[unit] value[unit]
\end{verbatim}

\verb+ticksize+ sets both values. The first one is left/below and the optional second
one is right/above of the coordinate axis. The old setting \verb+tickstyle=bottom+ is
now easy to realize, e.g.: \verb+ticksize=-6pt 0+, or vice versa, if the coordinates
are set from positive to negative values.

\medskip
\begin{LTXexample}[width=6cm]
\psset{arrowscale=3}
\begin{pspicture}(-1.5,-1.5)(4,3.5)
  \psaxes[ticksize=0.5cm]{->}(0,0)(-1.5,-1.5)(4,3.5)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6cm]
\psset{arrowscale=3}
\begin{pspicture}(-1.5,-1.5)(4,3.5)
  \psaxes[xticksize=-10pt 0,yticksize=0 10pt]{->}(0,0)(-1.5,-1.5)(4,3.5)
\end{pspicture}
\end{LTXexample}

A grid is also possible by setting the values to the max/min coordinates.

\begin{LTXexample}[width=6cm]
\psset{arrowscale=3}
\begin{pspicture}(-.5,-.5)(5,4.5)
  \psaxes[ticklinestyle=dashed,ticksize=0 4cm]{->}(0,0)(-.5,-.5)(5,4.5)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{subticks}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
subticks=<number>
\end{verbatim}

By default subticks cannot have labels.

\begin{LTXexample}[width=3.5cm]
\psset{ticksize=6pt}
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=all,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=y,subticks=5]{->}(0,0)(-1,-1)(2,2)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=x,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\begin{pspicture}(-1,-1)(2,2)
\psaxes[ticks=none,subticks=5]{->}(0,0)(2,2)(-1,-1)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{subticksize}, \texttt{xsubticksize}, \texttt{ysubticksize}}
%--------------------------------------------------------------------------------------

Syntax:
\begin{verbatim}
subticksize=value
xsubticksize=value
ysubticksize=value
\end{verbatim}

\verb+subticksize+ sets both values, which are relative to the ticksize length and 
can have any number. 1 sets it to the same length as the main ticks.

\begin{LTXexample}[preset=\centering,pos=t]
\psset{yunit=1.5cm,xunit=3cm}
\begin{pspicture}(-1.25,-4.75)(3.25,.75)
  \psaxes[xticksize=-4.5 0.5,ticklinestyle=dashed,subticks=5,xsubticksize=1,%
     ysubticksize=0.75,xsubticklinestyle=dotted,xsubtickwidth=1pt,
     subtickcolor=gray]{->}(0,0)(-1,-4)(3.25,0.5)
\end{pspicture}
\end{LTXexample}

\clearpage

%--------------------------------------------------------------------------------------
\subsection{\texttt{tickcolor}, \texttt{subtickcolor}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
tickcolor=<color>
xtickcolor=<color>
ytickcolor=<color>
subtickcolor=<color>
xsubtickcolor=<color>
ysubtickcolor=<color>
\end{verbatim}

\verb+tickcolor+ and \verb+subtickcolor+ set both for the x- and the y-Axis.

\begin{LTXexample}[preset=\centering,pos=t]
\begin{pspicture}(0,-0.75)(10,1)
\psaxes[labelsep=2pt,yAxis=false,labelFontSize=\footnotesize,%
  labelsep=-10pt,ticksize=0 10mm,subticks=10,subticksize=0.75,%
  tickcolor=red,subtickcolor=blue,tickwidth=1pt,%
  subtickwidth=0.5pt](10.01,0)
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=5cm]
\begin{pspicture}(5,-0.75)(10,1)
\psaxes[labelsep=2pt,yAxis=false,labelFontSize=\footnotesize,%
  labelsep=5pt,ticksize=0 -10mm,subticks=10,subticksize=0.75,%
  tickcolor=red,subtickcolor=blue,tickwidth=1pt,%
  subtickwidth=0.5pt,Ox=5](5,0)(5,0)(10.01,0)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{ticklinestyle} and \texttt{subticklinestyle}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
ticklinestyle=solid|dashed|dotted|none
xticklinestyle=solid|dashed|dotted|none
yticklinestyle=solid|dashed|dotted|none
subticklinestyle=solid|dashed|dotted|none
xsubticklinestyle=solid|dashed|dotted|none
ysubticklinestyle=solid|dashed|dotted|none
\end{verbatim}

\verb+ticklinestyle+ and \verb+subticklinestyle+ set both values for the x and y axis. The
value \verb+none+ doesn't really makes sense, because it is the same to 
\verb+[sub]ticklines=0+

\begin{LTXexample}[preset=\centering,pos=t]
\psset{unit=4cm}
\pspicture(-0.15,-0.15)(2.5,1)
  \psaxes[axesstyle=frame,logLines=y,xticksize=0 1,xsubticksize=1,%
    ylogBase=10,tickcolor=red,subtickcolor=blue,tickwidth=1pt,%
    subticks=20,xsubticks=10,xticklinestyle=dashed,%
    xsubticklinestyle=dashed](2.5,1)
\endpspicture
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsection{\texttt{loglines}}
%--------------------------------------------------------------------------------------
Syntax:
\begin{verbatim}
loglines=all|x|y
\end{verbatim}

\begin{LTXexample}[width=5.5cm]
\pspicture(0,-1)(5,5)
   \psaxes[subticks=5,axesstyle=frame,xylogBase=10,logLines=all](5,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[preset=\centering,pos=t]
\psset{unit=4cm}
\pspicture(-0.15,-0.15)(2.5,3)
  \psaxes[axesstyle=frame,logLines=y,xticksize=0 3,xsubticksize=1,%
    ylogBase=10,tickcolor=red,subtickcolor=blue,tickwidth=1pt,%
    subticks=20,xsubticks=10](2.5,3)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[preset=\centering,pos=t]
\psset{unit=4}
\pspicture(-0.5,-0.3)(3,1.2)
   \psaxes[axesstyle=frame,logLines=x,xlogBase=10,Dy=0.5,%
     tickcolor=red,subtickcolor=blue,tickwidth=1pt,ysubticks=5,xsubticks=10](3,1)
\endpspicture
\end{LTXexample}

%--------------------------------------------------------------------------------------
\subsection{\texttt{xylogBase}, \texttt{xlogBase} and \texttt{ylogBase}}
%--------------------------------------------------------------------------------------
There are additional options \verb|xylogBase | xlogBase | ylogBase| to get one or both axes with logarithm labels.
For an intervall of [$10^{-3} ... 10^2$] choose a \verb|pstricks| intervall of [-3,2]. \verb|pstricks| takes $0$ as the origin of this axes, which is wrong
if we want to have a logarithm axes. With the options \verb|Oy| and \verb|Ox| we can set
the origin to $-3$, so that the first label gets $10^{-3}$. If this is not done by the
user then \verb|pstricks-add| does it by default. An alternative is to set these
parameters to empty values \verb|Ox={},Oy={}|, in this case \verb|pstricks-add| does nothing.


%------------------------------------------------------------------------------------
\subsubsection{\texttt{xylogBase}}
%------------------------------------------------------------------------------------
This mode is in math also called double logarithm. It is a combination of the two forgoing modes and the function is now $y=\log x$ and is shown in the following example.

\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-3.5,-3.5)(3.5,3.5)
  \psplot[linewidth=2pt,linecolor=red]{0.001}{3}{x log}
  \psaxes[xylogBase=10,Oy=-3]{<->}(-3,-3)(3.5,3.5)
  \uput[-90](3.5,-3){x}
  \uput[180](-3,3.5){y}
  \rput(2.5,1){$y=\log x$}
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------------
\subsubsection{\texttt{ylogBase}}
%--------------------------------------------------------------------------------------------
The values for the \texttt{psaxes} y-coordinate are now the exponents to the base $10$ and for the right function to the base $e$: $10^{-3} \ldots 10^1$ which corresponds to the given y-intervall $-3\ldots 1.5$, where only integers as exponents are possible. These logarithm labels have no effect to the internal used units. To draw the logarithm function we have to use the math function
\[y=\log\{\log x\}\]
\[y=\ln\{\ln x\}\]
with an drawing intervall of $1.001\ldots 6$.

\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-0.5,-3.5)(6.5,1.5)
  \psaxes[ylogBase=10]{<->}(0,-3)(6.5,1.5)
  \uput[-90](6.5,-3){x}
  \uput[0](0,1.4){y}
  \rput(5,1){$y=\log x$}
  \psplot[linewidth=2pt,%
  plotpoints=100,linecolor=red]{1.001}{6}{x log log} % log(x)
\end{pspicture}
\end{LTXexample}

\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-0.5,-3.5)(6.5,1.5)
  \psplot[linewidth=2pt,plotpoints=100,linecolor=red]%
    {1.04}{6}{/ln {log 0.4343 div} def x ln ln} % log(x)
  \psaxes[ylogBase=e]{<->}(0,-3)(6.5,1.5)
  \uput[-90](6.5,-3){x}
  \uput[0](0,1.5){y}
  \rput(5,1){$y=\ln x$}
\end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=7cm]
  \begin{pspicture}(-0.5,1.75)(6.5,4.5)
    \psaxes[ylogBase=10,Oy=2]{<->}(0,2)(0,2)(6.5,4.5)
  \end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=7cm]
  \begin{pspicture}(-0.5,-0.25)(6.5,4.5)
    \psplot{0}{6}{x x cos add log}                       % x   + cox(x)
    \psplot[linecolor=red]{0}{6}{x 3 exp x cos add log}  % x^3 + cos(x)
    \psplot[linecolor=cyan]{0}{6}{x 5 exp x cos add log} % x^5 + cos(x)
    \psaxes[ylogBase=10]{<->}(6.5,4.5)
  \end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-0.5,-1.25)(6.5,4.5)
  \psplot{0}{6}{x x cos add log}                       % x   + cox(x)
  \psplot[linecolor=red]{0}{6}{x 3 exp x cos add log}  % x^3 + cos(x)
  \psplot[linecolor=cyan]{0}{6}{x 5 exp x cos add log} % x^5 + cos(x)
  \psaxes[ylogBase=10]{<->}(0,-1)(0,-1)(6.5,4.5)
\end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=4cm]
\begin{pspicture}(2.5,1.75)(6.5,4.5)
  \psplot[linecolor=cyan]{3}{6}{x 5 exp x cos add log} % x^5 + cos(x)
  \psaxes[ylogBase=10,Ox=3,Oy=2]{->}(3,2)(3,2)(6.5,4.5)
\end{pspicture}
\end{LTXexample}





%--------------------------------------------------------------------------------------
\subsubsection{\texttt{xlogBase}}
%--------------------------------------------------------------------------------------
Now we have to use the easy math function $y=x$ because the x axis is still $\log x$.

\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-3.5,-3.5)(3.5,3.5)
  \psplot[linewidth=2pt,linecolor=red]{-3}{3}{x} % log(x)
  \psplot[linewidth=2pt,linecolor=blue]{-1.3}{1.5}{x 0.4343 div} % ln(x)
  \psaxes[ylogBase=10,Oy=-3,Ox=-3]{->}(-3,-3)(3.5,3.5)
  \uput[-90](3.5,-3){x}
  \uput[180](-3,3.5){y}
  \rput(2.5,1){$y=\log x$}
  \rput[lb](0,-1){$y=\ln x$}
\end{pspicture}
\end{LTXexample}

\begin{center}
\psset{yunit=3cm,xunit=2cm}
\begin{pspicture}(-1.25,-1.25)(4.25,1.5)
  \uput[-90](4.25,-1){x}
  \uput[0](-1,1){y}
  \rput(0,1){$y=\sin x$}
  \psplot[linewidth=2pt,plotpoints=5000,linecolor=red]{-1}{3.5}{10 x exp sin }
  \psaxes[xlogBase=10,Oy=-1]{->}(-1,-1)(4.25,1.25)
\end{pspicture}
\end{center}

\begin{lstlisting}
\psset{yunit=3cm,xunit=2cm}
\begin{pspicture}(-1.25,-1.25)(4.25,1.5)
  \uput[-90](4.25,-1){x}
  \uput[0](-1,1){y}
  \rput(0,1){$y=\sin x$}
  \psplot[linewidth=2pt,plotpoints=5000,linecolor=red]{-1}{3.5}{10 x exp sin }
  \psaxes[xlogBase=10,Oy=-1]{->}(-1,-1)(4.25,1.25)
\end{pspicture}
\end{lstlisting}


\begin{LTXexample}[width=7cm]
\begin{pspicture}(-3.5,-2.5)(3.5,2.5)
  \psaxes[xlogBase=10]{->}(0,0)(-3.5,-2.5)(3.5,2.5)
  \psplot{-2.5}{2.5}{10 x exp log}
\end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-3.5,-2.5)(3.5,2.5)
  \psaxes[xlogBase=10,Ox={},Oy={}]{->}(0,0)(-3.5,-2.5)(3.5,2.5)
  \psplot{-2.5}{2.5}{10 x exp log}
\end{pspicture}
\end{LTXexample}


%------------------------------------------------------------------------------------
\subsubsection{No logstyle (\texttt{xylogBase=\{\}})}
%------------------------------------------------------------------------------------
This is only a demonstration that the default option \verb|logBase={}| still works ... :-)

\medskip
\begin{LTXexample}[width=7cm]
\begin{pspicture}(-3.5,-0.5)(3.5,2.5)
  \psplot[linewidth=2pt,linecolor=red,xylogBase={}]{0.5}{3}{x log} % log(x)
  \psaxes{->}(0,0)(-3.5,0)(3.5,2.5)
  \uput[-90](3.5,0){x}
  \uput[180](0,2.5){y}
  \rput(2.5,1){$y=\log x$}
\end{pspicture}
\end{LTXexample}


\newpage
%--------------------------------------------------------------------------------------
\subsection{\texttt{subticks}, \texttt{tickwidth} and \texttt{subtickwidth}}
%--------------------------------------------------------------------------------------


\begin{center}
\psset{arrowscale=3}
 \psaxes[labelsep=2pt,yAxis=false,subticks=8]{->}(0,0)(-5,-1)(5,1)\\[1cm]
 \psaxes[yAxis=false,subticks=4,ticksize=-4pt 0]{->}(0,0)(5,1)(-5,-1)\\
 \psaxes[yAxis=false,subticks=4,ticksize=-10pt 0]{->}(0,0)(-5,-5)(5,5)\\[1cm]
 \psaxes[yAxis=false,subticks=10,ticksize=0 -10pt,labelsep=15pt]{->}(0,0)(-5,-5)(5,5)\\[1cm]
 \psaxes[yAxis=false,subticks=4,ticksize=0 10pt,labelsep=-15pt]{->}(0,0)(5,5)(-5,-5)\\[1cm]
 \psaxes[yAxis=false,subticks=4,ticksize=0 -10pt]{->}(0,0)(5,5)(-5,-5)\\[0.25cm]
 \psaxes[yAxis=false,subticks=0]{->}(0,0)(-5,-5)(5,5)\\[1cm]
 \psaxes[yAxis=false,subticks=0,tickcolor=red,linecolor=blue]{->}(0,0)(5,5)(-5,-5)\\
 \psaxes[yAxis=false,subticks=5,tickwidth=2pt,subtickwidth=1pt]{->}(0,0)(-5,-5)(5,5)\\[1cm]
 \psaxes[yAxis=false,subticks=0,tickcolor=red]{->}(0,0)(5,5)(-5,-5)
\end{center}
\begin{lstlisting}[xrightmargin=-1.75cm]
\psset{arrowscale=3}
\psaxes[labelsep=2pt,yAxis=false,subticks=8]{->}(0,0)(-5,-1)(5,1)\\[1cm]
\psaxes[yAxis=false,subticks=4,ticksize=-4pt 0]{->}(0,0)(5,1)(-5,-1)\\
\psaxes[yAxis=false,subticks=4,ticksize=-10pt 0]{->}(0,0)(-5,-5)(5,5)\\[1cm]
\psaxes[yAxis=false,subticks=10,ticksize=0 -10pt,labelsep=15pt]{->}(0,0)(-5,-5)(5,5)\\[1cm]
\psaxes[yAxis=false,subticks=4,ticksize=0 10pt,labelsep=-15pt]{->}(0,0)(5,5)(-5,-5)\\[1cm]
\psaxes[yAxis=false,subticks=4,ticksize=0 -10pt]{->}(0,0)(5,5)(-5,-5)\\[0.25cm]
\psaxes[yAxis=false,subticks=0]{->}(0,0)(-5,-5)(5,5)\\[1cm]
\psaxes[yAxis=false,subticks=0,tickcolor=red,linecolor=blue]{->}(0,0)(5,5)(-5,-5)\\
\psaxes[yAxis=false,subticks=5,tickwidth=2pt,subtickwidth=1pt]{->}(0,0)(-5,-5)(5,5)\\[1cm]
\psaxes[yAxis=false,subticks=0,tickcolor=red]{->}(0,0)(5,5)(-5,-5)
\end{lstlisting}
   
\vspace*{4cm}
\begin{center}
  \psset{arrowscale=3}
  \psaxes[xAxis=false,subticks=8]{->}(0,0)(-5,-5)(5,5)\hspace{2em}
  \psaxes[xAxis=false,subticks=4]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
  \psaxes[xAxis=false,subticks=4,ticksize=0 4pt]{->}(0,0)(-5,-5)(5,5)\hspace{3em}
  \psaxes[xAxis=false,subticks=4,ticksize=-4pt 0]{->}(0,0)(-5,-5)(5,5)\hspace{1em}
  \psaxes[xAxis=false,subticks=4,ticksize=0 4pt]{->}(0,0)(5,5)(-5,-5)\hspace{2em}
  \psaxes[xAxis=false,subticks=4,ticksize=-4pt 0,linecolor=red]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
  \psaxes[xAxis=false,subticks=0]{->}(0,0)(-5,-5)(5,5)\hspace{1em}
  \psaxes[xAxis=false,subticks=0,tickcolor=red,linecolor=blue]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
  \psaxes[xAxis=false,subticks=5,tickwidth=2pt,subtickwidth=1pt]{->}(0,0)(-5,-5)(5,5)\hspace{2em}
  \psaxes[xAxis=false,subticks=5,tickcolor=red,tickwidth=2pt,%
      ticksize=10pt,subtickcolor=blue,subticksize=0.75]{->}(0,0)(5,5)(-5,-5)
\end{center}

\vspace*{5cm}
\begin{lstlisting}[xrightmargin=-1.75cm]
\psset{arrowscale=3}
\psaxes[xAxis=false,subticks=8]{->}(0,0)(-5,-5)(5,5)\hspace{2em}
\psaxes[xAxis=false,subticks=4]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
\psaxes[xAxis=false,subticks=4,ticksize=0 4pt]{->}(0,0)(-5,-5)(5,5)\hspace{3em}
\psaxes[xAxis=false,subticks=4,ticksize=-4pt 0]{->}(0,0)(-5,-5)(5,5)\hspace{1em}
\psaxes[xAxis=false,subticks=4,ticksize=0 4pt]{->}(0,0)(5,5)(-5,-5)\hspace{2em}
\psaxes[xAxis=false,subticks=4,ticksize=-4pt 0,linecolor=red]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
\psaxes[xAxis=false,subticks=0]{->}(0,0)(-5,-5)(5,5)\hspace{1em}
\psaxes[xAxis=false,subticks=0,tickcolor=red,linecolor=blue]{->}(0,0)(5,5)(-5,-5)\hspace{4em}
\psaxes[xAxis=false,subticks=5,tickwidth=2pt,subtickwidth=1pt]{->}(0,0)(-5,-5)(5,5)\hspace{2em}
\psaxes[xAxis=false,subticks=5,tickcolor=red,tickwidth=2pt,%
  ticksize=10pt,subtickcolor=blue,subticksize=0.75]{->}(0,0)(5,5)(-5,-5)
\end{lstlisting}
 
\begin{LTXexample}[width=5.5cm]
\pspicture(5,5.5)
\psaxes[subticks=4,ticksize=6pt,subticksize=0.5,%
   tickcolor=red,subtickcolor=blue]{->}(5.4,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=5.5cm]
\pspicture(5,5.5)
   \psaxes[subticks=5,ticksize=0 6pt,subticksize=0.5]{->}(5.4,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=5.5cm]
\pspicture(5,5.5)
   \psaxes[subticks=5,ticksize=-6pt 0,subticksize=0.5]{->}(5.4,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\pspicture(-3,-3)(3,3.5)
   \psaxes[subticks=5,ticksize=0 6pt,subticksize=0.5]{->}(0,0)(3,3)(-3,-3)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=6.5cm]
\pspicture(0,0.5)(-3,-3)
   \psaxes[subticks=5,ticksize=-6pt 0,subticksize=0.5,linecolor=red]{->}(-3,-3)
\endpspicture
\end{LTXexample}



\begin{LTXexample}[width=5.5cm]
\psset{axesstyle=frame}
\pspicture(5,5.5)
   \psaxes[subticks=4,tickcolor=red,subtickcolor=blue](5,5)
\endpspicture
\end{LTXexample}

\vspace{1cm}
\begin{LTXexample}[width=5.5cm]
\pspicture(5,5.5)
   \psaxes[subticks=5,subticksize=1,subtickcolor=lightgray](5,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=5.5cm]
\pspicture(5,5.5)
   \psaxes[subticks=2,subticksize=1,subtickcolor=lightgray](5,5)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\pspicture(3,4.5)
   \psaxes[subticks=5,ticksize=-7pt 0](3,4)
\endpspicture
\end{LTXexample}


\begin{LTXexample}[width=3.5cm]
\pspicture(0,1)(-3,-4)
   \psaxes[subticks=5](-3,-4)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\pspicture(3,4.5)
   \psaxes[axesstyle=axes,subticks=5](3,4)
\endpspicture
\end{LTXexample}

\begin{LTXexample}[width=3.5cm]
\pspicture(0,1)(-3,-4)
  \psaxes[axesstyle=axes,subticks=5,%
    ticksize=0 10pt,labelsep=13pt](-3,-4)
\endpspicture
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{\texttt{xlabelFactor} and \texttt{ylabelFactor}}
%--------------------------------------------------------------------------------------
When having big numbers as data records then it makes sense to write the values
as ${<number>\cdot 10^{<exp>}}$. These new options allow to define the additional part
of the value.

\resetOptions
\begin{LTXexample}
\readdata{\data}{demo1.dat}
\pstScalePoints(1,0.000001){}{}% (x,y){additional x operator}{y op}
\psset{llx=-1cm,lly=-1cm}
\psgraph[ylabelFactor={\cdot 10^6},Dx=5,Dy=100](0,0)(25,750){8cm}{5cm} 
   \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\endpsgraph
\pstScalePoints(1,1){}{}% reset
\end{LTXexample}

\clearpage
%--------------------------------------------------------------------------------------
\subsection{Plot style \texttt{bar} and option \texttt{barwidth}}
%--------------------------------------------------------------------------------------
This option allows to draw bars for the data records. The width of the bars
is controlled by the option \verb+barwidth+, which is set by default to
value of \verb+0.25cm+, which is the total width.

\def\barData{
0 0.03
1 0.11
2 0.28
3 0.84
4 6.70
5 8.55
6 8.77
7 11.09
8 7.18
9 6.20
10 5.78
11 4.19
12 2.37
13 2.26
14 1.68
15 1.03
16 1.37
17 1.34
18 0.92
19 0.67
20 0.87
21 1.20
22 1.98
23 3.99
24 5.08
25 5.17
26 5.78
27 4.44
28 0.11 
}

\begin{LTXexample}[preset=\centering,pos=t]
\psset{xunit=.44cm,yunit=.3cm}
\begin{pspicture}(-2,-3)(29,13)
  \psaxes[axesstyle=axes,Ox=1466,Oy=0,Dx=4,Dy=2,%
     ylabelFactor={\,\%}]{-}(29,12)
  \listplot[shadow=true,linecolor=blue,plotstyle=bar,barwidth=0.3cm,
     fillcolor=red,fillstyle=solid]{\barData}
  \rput{90}(-3,6.25){Amount}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[preset=\centering,pos=t]
\psset{xunit=.44cm,yunit=.3cm}
\begin{pspicture}(-2,-3)(29,13)
  \psaxes[axesstyle=axes,Ox=1466,Oy=0,Dx=4,Dy=2,%
     ylabelFactor={\,\%}]{-}(29,12)
  \listplot[linecolor=blue,plotstyle=bar,barwidth=0.3cm,
     fillcolor=red,fillstyle=crosshatch]{\barData}
  \rput{90}(-3,6.25){Amount}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[preset=\centering,pos=t]
\psset{xunit=.44cm,yunit=.3cm}
\begin{pspicture}(-2,-3)(29,13)
  \psaxes[axesstyle=axes,Ox=1466,Oy=0,Dx=4,Dy=2,%
     ylabelFactor={\,\%}]{-}(29,12)
  \listplot[linecolor=blue,plotstyle=bar,barwidth=0.3cm,
     fillcolor=red,fillstyle=vlines]{\barData}
  \listplot[showpoints=true]{\barData}
  \rput{90}(-3,6.25){Amount}
\end{pspicture}
\end{LTXexample}

%--------------------------------------------------------------------------------------
\subsection{\texttt{trigLabels} and \texttt{trigLabelBase} -- axis with trigonmetrical units}
%--------------------------------------------------------------------------------------
With the option \verb+trigLabels=true+ the labels on the x axis are trigonometrical ones.
The option \verb+trigLabelBase+ set the demoninator of fraction. The default value of
0 is the same as no fraction.
The following constants are are defined in the package:
\begin{lstlisting}
\def§\ON§\psPiFour§\OFF§{12.566371}
\def§\ON§\psPiTwo§\OFF§{6.283185}
\def§\ON§\psPi§\OFF§{3.14159265}
\def§\ON§\psPiH§\OFF§{1.570796327}
\newdimen\pstRadUnit
\newdimen\pstRadUnitInv
§\ON§\pstRadUnit§\OFF§=1.047198cm % this is pi/3
§\ON§\pstRadUnitInv§\OFF§=0.95493cm % this is 3/pi
\end{lstlisting}



Because it is a bit complicating to set the right values, we show some more examples
here.

For \textbf{all} following examples in this section we did a global\\ \lstinline[frame=single]|\psset{trigLabels=true,labelFontSize=\small}|.



\psset{trigLabels,labelFontSize=\small}
Translating the decimal ticks to geometrical makes no real sense,
because every 1 xunit (1cm) is a tick and the last one at 6cm.

\begin{minipage}{0.4\fullWidth}
\begin{pspicture}[trigLabels=true](-0.5,-1.25)(6.5,1.25)%
  \pnode(5,0){A}%
  \psaxes{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)%
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)%
  \pnode(5,0){A}%
  \psaxes{->}(0,0)(-.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}
\end{lstlisting}
\end{minipage}

\begin{minipage}{0.4\fullWidth}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)%
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\begin{pspicture}(-0.5,-1.25)(10,1.25)%
  \psaxes[§\ON§trigLabelBase=3§\OFF§]{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}
\end{lstlisting}
\end{minipage}



Modifing the ticks to have the last one exactly at the end is possible
with a different dx value ($\frac{\pi}{3}\approx 1.047$):


\begin{minipage}{0.4\fullWidth}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(\psPiTwo,0){C}%
  \psaxes[dx=\pstRadUnit]{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(\psPiTwo,0){C}%
  \psaxes[§\ON§dx=\pstRadUnit§\OFF§]{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}%
\end{lstlisting}
\end{minipage}


\begin{minipage}{0.4\fullWidth}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(5,0){B}%
  \psaxes[dx=\pstRadUnit,trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(5,0){B}%
  \psaxes[dx=\pstRadUnit,§\ON§trigLabelBase=3§\OFF§] {->}(0,0)(-0.5,-1.25)(\psPiTwo,1.25)
\end{pspicture}%
\end{lstlisting}
\end{minipage}

\ncline[linestyle=dashed,linewidth=0.4pt]{A}{B}

Set globaly everything in radiant unit. Now 6 units on the $x$-axis
are $6\pi$. Using \verb+trigLabelBase=3+ reduces this value to $2\pi$, a.s.o.

\bigskip
\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(6,0){D}%
  \psaxes{->}(0,0)(-0.5,-1.25)(6.5,1.25)%
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{§\ON§xunit=\pstRadUnit§\OFF§}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)\pnode(6,0){D}%
  \psaxes{->}(0,0)(-0.5,-1.25)(6.5,1.25)%
\end{pspicture}%
\end{lstlisting}
\end{minipage}
\ncline[linestyle=dashed,linewidth=0.4pt]{C}{D}


\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{§\ON§xunit=\pstRadUnit§\OFF§}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[§\ON§trigLabelBase=3§\OFF§]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{lstlisting}
\end{minipage}



\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=4]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{§\ON§xunit=\pstRadUnit§\OFF§}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[§\ON§trigLabelBase=4§\OFF§]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{lstlisting}
\end{minipage}

\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=6]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{§\ON§xunit=\pstRadUnit§\OFF§}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[§\ON§trigLabelBase=6§\OFF§]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
\end{pspicture}%
\end{lstlisting}
\end{minipage}



The best way seems to be setting the $x$-unit to \verb+\pstRadUnit+. Plotting a
function doesn't consider the value for \verb+trigLabelBase+, it has to be done by
the user. The first example sets the unit locally for the \verb+\psplot+
back to 1cm, which is needed, because we use this unit on PostScript side.

\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[xunit=1cm,linecolor=red,linewidth=1.5pt]{0}{\psPiTwo}{x RadtoDeg sin}
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[§\ON§xunit=1cm§\OFF§,linecolor=red,linewidth=1.5pt]{0}{§\ON§\psPiTwo§\OFF§}{x RadtoDeg sin}
\end{pspicture}
\end{lstlisting}
\end{minipage}


\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[linecolor=red,linewidth=1.5pt]{0}{6}{x Pi 3 div mul RadtoDeg sin}
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[trigLabelBase=3]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[linecolor=red,linewidth=1.5pt]{0}{6}{x §\ON§Pi 3 div mul §\OFF§RadtoDeg sin}
\end{pspicture}
\end{lstlisting}
\end{minipage}


\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[dx=1.5]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[xunit=.5cm,linecolor=red,linewidth=1.5pt]{0}{\psPiFour}{x RadtoDeg sin}
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[§\ON§dx=1.5§\OFF§]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[§\ON§xunit=0.5cm§\OFF§,linecolor=red,linewidth=1.5pt]{0}{§\ON§\psPiFour§\OFF§}{x RadtoDeg sin}
\end{pspicture}
\end{lstlisting}
\end{minipage}


\begin{minipage}{0.4\fullWidth}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[dx=0.75,trigLabelBase=2]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[xunit=.5cm,linecolor=red,linewidth=1.5pt]{0}{\psPiFour}{x RadtoDeg sin}
\end{pspicture}
\end{minipage}%
\begin{minipage}{0.6\fullWidth}
\begin{lstlisting}
\psset{xunit=\pstRadUnit}%
\begin{pspicture}(-0.5,-1.25)(6.5,1.25)
  \psaxes[§\ON§dx=0.75§\OFF§,§\ON§trigLabelBase=2§\OFF§]{->}(0,0)(-0.5,-1.25)(6.5,1.25)
  \psplot[§\ON§xunit=0.5cm§\OFF§,linecolor=red,linewidth=1.5pt]{0}{\psPiFour}{x RadtoDeg sin}
\end{pspicture}
\end{lstlisting}
\end{minipage}


It is also possible to set the $x$ unit and $dx$ value to get the labels
right. But this needs some more understanding how it really works. 
A \verb+xunit=1.570796327+ sets the unit to $\pi/2$ and a  \verb+dx=0.666667+
then puts every $2/3$ of the unit a tick mark and a label. The length of
the $x$-axis is 6.4 units which is $6.4\cdot 1.570796327cm\approx 10cm$.
The function then is plotted from $0$ to $3\pi=9.424777961$. 




\begin{center}
\psset{unit=1cm}
\begin{pspicture}(-0.5,-1.25)(10,1.25)
  \psaxes[xunit=1.570796327,showorigin=false,trigLabelBase=3,dx=0.666667]{->}(0,0)(-0.5,-1.25)(6.4,1.25)
  \psplot[linecolor=red,linewidth=1.5pt]{0}{9.424777961}{%
	x RadtoDeg dup sin exch 1.1 mul cos add}
\end{pspicture}
\end{center}
\begin{lstlisting}
\begin{pspicture}(-0.5,-1.25)(10,1.25)
  \psaxes[§\ON§xunit=1.570796327§\OFF§,§\ON§trigLabelBase=3§\OFF§,§\ON§dx=0.666667§\OFF§]{->}(0,0)(-0.5,-1.25)(6.4,1.25)
  \psplot[linecolor=red,linewidth=1.5pt]{0}{§\ON§9.424777961§\OFF§}{%
	x RadtoDeg dup sin exch 1.1 mul cos add}
\end{pspicture}
\end{lstlisting}

\begin{center}
\psset{unit=1cm}
\begin{pspicture}(-0.5,-1.25)(10,1.25)
  \psaxes[xunit=\psPi,dx=0.25]{->}(0,0)(-0.25,-1.25)(3.2,1.25)
  \psplot[xunit=0.25,plotpoints=500,linecolor=red,linewidth=1.5pt]{0}{37.70}{%
	x RadtoDeg dup sin exch 1.1 mul cos add}
\end{pspicture}
\end{center}
\begin{lstlisting}
\psset{§\ON§unit=1cm§\OFF§}
  \psplot[§\ON§xunit=0.25§\OFF§,§\ON§plotpoints=500§\OFF§,linecolor=red,linewidth=1.5pt]{0}{37.70}{%
	x RadtoDeg dup sin exch 1.1 mul cos add}
\end{pspicture}
\end{lstlisting}


\begin{center}
\psset{unit=1cm}
\begin{pspicture}(-0.5,-2)(10,2)
  \psplot[xunit=0.0625,linecolor=red,linewidth=1.5pt,plotpoints=5000]{0}{150.80}{%
	x RadtoDeg dup sin exch 1.1 mul cos add}
  \psaxes[xunit=\psPi,dx=0.5,Dx=8,subticks=2]{->}(0,0)(-0.1,-2)(3.2,2)
\end{pspicture}
\end{center}
\begin{lstlisting}
\psset{§\ON§unit=1cm§\OFF§}
\begin{pspicture}(-0.5,-1.25)(10,1.25)
  \psplot[§\ON§xunit=0.0625§\OFF§,linecolor=red,linewidth=1.5pt,%
      §\ON§plotpoints=5000§\OFF§]{0}{150.80}%
	{x RadtoDeg dup sin exch 1.1 mul cos add}
  \psaxes[§\ON§xunit=\psPi§\OFF§,§\ON§dx=0.5§\OFF§,§\ON§Dx=8§\OFF§]{->}(0,0)(-0.25,-1.25)(3.2,1.25)
\end{pspicture}
\end{lstlisting}


\begin{center}
\psset{unit=1cm}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psaxes[trigLabels=true,xunit=\psPi]{->}(0,0)(-2.2,-1.5)(2.2,1.5)
  \psplot[linecolor=red,linewidth=1.5pt]{-7}{7}{x RadtoDeg sin}
\end{pspicture}
\end{center}
\begin{lstlisting}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psaxes[trigLabels=true,§\ON§xunit=\psPi§\OFF§]{->}(0,0)(-2.2,-1.5)(2.2,1.5)
  \psplot[linecolor=red,linewidth=1.5pt]{-7}{7}{x RadtoDeg sin}
\end{pspicture}
\end{lstlisting}


\begin{center}
\psset{unit=1cm}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psaxes[trigLabels=true,
	trigLabelBase=2,dx=\psPiH,xunit=\psPi]{->}(0,0)(-2.2,-1.5)(2.2,1.5)
  \psplot[linecolor=red,linewidth=1.5pt]{-7}{7}{x RadtoDeg sin}
\end{pspicture}
\end{center}
\begin{lstlisting}
\begin{pspicture}(-7,-1.5)(7,1.5)
  \psaxes[trigLabels=true,
	trigLabelBase=2,dx=\psPiH,xunit=\psPi]{->}(0,0)(-2.2,-1.5)(2.2,1.5)
  \psplot[linecolor=red,linewidth=1.5pt]{-7}{7}{x RadtoDeg sin}
\end{pspicture}
\end{lstlisting}


\psset{trigLabels=false}



%------------------------------------------------------------------------------------
\subsection{New options for \CMD{readdata}}
%------------------------------------------------------------------------------------


By default the macros \verb|\readdata| reads every
data record, which could be annoying when you have some text lines at top of your
data files or when there are more than 10000 records to read. 


\verb|pstricks-add| defines two additional keys \verb|ignoreLines| and \verb|nStep|, which allows
to ignore preceeding lines, e.g. \verb|ignoreLines=2|, or to read only a selected part of the data records,
e.g. \verb|nStep=10|, only every 10\textsuperscript{th} records is saved.

\begin{lstlisting}
\readdata[ignoreLines=2]{\dataA}{stressrawdata.dat}
\readdata[nStep=10]{\dataA}{stressrawdata.dat}
\end{lstlisting}

The default value for  \verb+ignoreLines+ is $0$ and for \verb+nStep+ is $1$.
the following data file has two text lines which shall be ignored by the \verb+\readdata+ macro:

\begin{LTXexample}[width=4cm]
\begin{filecontents*}{pstricks-add-data9.dat}
some nonsense in this line ï¿½ï¿½ï¿½time forcex forcey
0 0.2
1 1
2 4
\end{filecontents*}
\readdata[ignoreLines=2]{\data}{pstricks-add-data9.dat}
\pspicture(2,4)
  \listplot[showpoints=true]{\data}
  \psaxes{->}(2,4)
\endpspicture
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{New options for \texttt{\textbackslash listplot}}
%--------------------------------------------------------------------------------------
By default the plot macros \verb|\dataplot|, \verb|\fileplot| and \verb|\listplot| plot every
data record. The package \verb|pst-plot-add| defines additional keys \verb|nStep, nStart, nEnd| and \verb|xStep, xStart, xEnd|, which allows
to plot only a selected part of the data records, e.g. \verb|nStep=10|. These "n" options mark the number of the record to be plot ($0,1,2,...$) and the "x" ones the x-values of the data records.


\begin{center}
\begin{tabular}{l|l}
Name & Default setting\\\hline
\verb|nStart| &  \verb|1|\\
\verb|nEnd|   &  \verb|{}|\\
\verb|nStep|  &  \verb|1|\\
\verb|xStart| &  \verb|{}|\\
\verb|xEnd|   &  \verb|{}|\\
\verb|yStart| &  \verb|{}|\\
\verb|yEnd|   &  \verb|{}|\\
\verb|xStep|  &  \verb|0|\\
\verb|plotNo|  &  \verb|1|\\
\verb|plotNoMax|  &  \verb|1|\\
\verb|ChangeOrder|  &  \verb|false|
\end{tabular}
\end{center}

These new options are only available
for the \verb|\listplot| macro, which is not a real limitation, because all data records can be read
from a file with the \verb|\readdata| macro (see example files or \cite{dtk02.2:jackson.voss:plot-funktionen}):
\begin{verbatim}
\readdata[nStep=10]{\data}{/home/voss/data/data1.dat}
\end{verbatim}

The use \verb|nStep| and \verb|xStep| options make only real sense when also using the
option \verb|plotstyle=dots|. Otherwise the coordinates are connected by a line as usual. Also the \verb|xStep| option needs increasing x values.
Pay attention that \verb+nStep+ can be used for \verb+\readdata+ and for \verb+\listplot+. If used
in both macros than the effect is multiplied, e.g. \verb+\readdata+ with \verb+nStep=5+ and
\verb+\listplot+ with \verb+nStep=10+ means, that only every 50\textsuperscript{th} data records
is read and plotted.

When both, \verb|x/yStart/End| are defined then the values are also compared with
both values.


%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{nStep/xStep}}
%--------------------------------------------------------------------------------------

The datafile \verb|data.dat| contains $1000$ data records. The thin blue line is the plot
of all records with the plotstyle option \verb|curve|.

\begin{LTXexample}[preset=\centering,pos=t]
\readdata{\data}{examples/data.dat}
\psset{xunit=0.125mm,yunit=0.0002mm}
\begin{pspicture}(-80,-30000)(1000,270000)
\psaxes[Dx=100,dx=100,Dy=50000,dy=50000](1000,250000)
\listplot[nStep=50,linewidth=3pt,linecolor=red,plotstyle=dots]{\data}
\listplot[linewidth=1pt,linecolor=blue]{\data}
\end{pspicture}
\end{LTXexample}




%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{nStart/xStart}}
%--------------------------------------------------------------------------------------

\begin{LTXexample}[preset=\centering,pos=t]
\readdata{\data}{examples/data.dat}
\psset{xunit=0.125mm,yunit=0.0002mm}
\begin{pspicture}(-80,-30000)(1000,270000)
\psaxes[Dx=100,dx=100,Dy=50000,dy=50000](1000,250000)
\listplot[nStart=200,linewidth=3pt,linecolor=blue]{\data}
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{nEnd/xEnd}}
%--------------------------------------------------------------------------------------

\begin{LTXexample}[preset=\centering,pos=t]
\readdata{\data}{examples/data.dat}
\psset{xunit=0.125mm,yunit=0.0002mm}
\begin{pspicture}(-80,-30000)(1000,310000)
\psaxes[axesstyle=frame,Dx=100,dx=100,Dy=50000,dy=50000](1000,300000)
\listplot[nEnd=800,linewidth=3pt,linecolor=blue]{\data}
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsubsection{Example for all new options}
%--------------------------------------------------------------------------------------

\begin{LTXexample}[preset=\centering,pos=t]
\readdata{\data}{examples/data.dat}
\psset{xunit=0.125mm,yunit=0.0002mm}
\begin{pspicture}(-80,-30000)(1000,310000)
\psaxes[axesstyle=frame,Dx=100,dx=100,Dy=50000,dy=50000](1000,300000)
\listplot[nStart=200, nEnd=800, nStep=50,linewidth=3pt,linecolor=blue,%
	plotstyle=dots]{\data}
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{xStart}}
%--------------------------------------------------------------------------------------

This example shows the use of the same plot with different units and different
\verb|xStart| value. The blue curve is the original plot of the data records.
To show the important part of the curve there is another one plotted with a
greater \verb|yunit| and a start value of \verb|xStart=0.35|. This makes it
possible to have a kind of a zoom to the original graphic.

\begin{center}
\psset{xunit=10cm, yunit=0.01cm}
\readdata{\data}{examples/data3.dat}
\begin{pspicture}(-0.1,-100)(1.5,700.0)
  \psaxes[Dx=0.25,Dy=100,dy=100\psyunit,ticksize=-4pt 0,%
    labelFontSize={\footnotesize}]{->}(0,0)(0,-100)(1.4,520)
  \uput[0](1.4,0){\textsf{t [s]}}
  \rput(-0.125,200){\psrotateleft{\small flow [ml/s]}}
  \listplot[linewidth=2pt, linecolor=blue]{\data}
  \rput(0.4,300){
    \pscustom[yunit=0.04cm, linewidth=1pt]{%
      \listplot[xStart=0.355]{\data}
      \psline(1,-2.57)(1,0)(0.355,0)
      \fill[fillstyle=hlines,fillcolor=gray,hatchwidth=0.4pt,hatchsep=1.5pt,hatchcolor=red]%
      \psline[linewidth=0.5pt]{->}(0.7,0)(1.05,0)
    }%
  }
  \psline[linewidth=.01]{->}(0.75,300)(0.4,20)
  \psline[linewidth=.01]{->}(1,290)(1.1,440)
  \rput(1.1,470){\footnotesize leak volume}
  \psline[linewidth=.01]{->}(0.78,200)(1,100)
  \rput[l](1.02,100){\footnotesize closing volume}
\end{pspicture}
\end{center}


\begin{lstlisting}
\psset{xunit=10cm, yunit=0.01cm}
\readdata{\data}{examples/data3.dat}
\begin{pspicture}(-0.1,-100)(1.5,700.0)
  \psaxes[Dx=0.25,Dy=100,dy=100\psyunit,ticksize=-4pt 0,%
    labelFontSize={\footnotesize}]{->}(0,0)(0,-100)(1.4,520)
  \uput[0](1.4,0){\textsf{t [s]}}
  \rput(-0.125,200){\psrotateleft{\small flow [ml/s]}}
  \listplot[linewidth=2pt, linecolor=blue]{\data}
  \rput(0.4,300){
    \pscustom[yunit=0.04cm, linewidth=1pt]{%
      \listplot[xStart=0.355]{\data}
      \psline(1,-2.57)(1,0)(0.355,0)
      \fill[fillstyle=hlines,fillcolor=gray,hatchwidth=0.4pt,hatchsep=1.5pt,hatchcolor=red]%
      \psline[linewidth=0.5pt]{->}(0.7,0)(1.05,0)
    }%
  }
  \psline[linewidth=.01]{->}(0.75,300)(0.4,20)
  \psline[linewidth=.01]{->}(1,290)(1.1,440)
  \rput(1.1,470){\footnotesize leak volume}
  \psline[linewidth=.01]{->}(0.78,200)(1,100)
  \rput[l](1.02,100){\footnotesize closing volume}
\end{pspicture}
\end{lstlisting}



\resetOptions
%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{yStart}/\texttt{yEnd}}
%--------------------------------------------------------------------------------------

\begin{LTXexample}[preset=\centering,pos=t]
\readdata{\data}{examples/data.dat}
\psset{xunit=0.125mm,yunit=0.0002mm}
\begin{pspicture}(-80,-30000)(1000,310000)
  \psaxes[axesstyle=frame,Dx=100,dx=100,Dy=50000,dy=50000](1000,300000)
  \psset{linewidth=0.1pt, linestyle=dashed,linecolor=red}
  \psline(0,40000)(1000,40000)
  \psline(0,175000)(1000,175000)
  \listplot[yStart=40000, yEnd=175000,linewidth=3pt,linecolor=blue,plotstyle=dots]{\data}
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{plotNo/plotNoMax}}
%--------------------------------------------------------------------------------------
By default the plot macros expect \verb+x|y+ data records, but
when having data files with multiple values for y, like:
\begin{verbatim}
x y1 y2 y3 y4 ... yMax
x y1 y2 y3 y4 ... yMax
...
\end{verbatim}

you can select the y value which should be plotted. The option \verb+plotNo+ marks the plotted
value (default $1$) and the option \verb+plotNoMax+ tells \verb+pst-plot+ how many $y$ values are
present. There are no real restrictions in the maximum number for \verb+plotNoMax+.

We have the following data file:
\begin{verbatim}
[% file examples/data.dat
0    0    3.375    0.0625
10    5.375    7.1875    4.5
20    7.1875    8.375    6.25
30    5.75    7.75    6.6875
40    2.1875    5.75    5.9375
50    -1.9375    2.1875    4.3125
60    -5.125    -1.8125    0.875
70    -6.4375    -5.3125    -2.6875
80    -4.875    -7.1875    -4.875
90    0    -7.625    -5.625
100    5.5    -6.3125    -5.8125
110    6.8125    -2.75    -4.75
120    5.25    2.875    -0.75
]%
\end{verbatim}

\noindent which holds data records for multiple plots (\verb+x y1 y2 y3+). This can be plotted
without any modification to the data file:

\begin{LTXexample}[preset=\centering,pos=t]
\readdata\Data{examples/dataMul.dat}
\psset{xunit=0.1cm, yunit=0.5cm,lly=-0.5cm}
\begin{pspicture}(0,-7.5)(150,10)
\psaxes[Dx=10,Dy=2.5]{->}(0,0)(0,-7.5)(150,7.5)
\psset{linewidth=2pt,plotstyle=line}
\listplot[linecolor=green,plotNo=1,plotNoMax=3]{\Data}
\listplot[linecolor=red,plotNo=2,plotNoMax=3]{\Data}
\listplot[linecolor=blue,plotNo=3,plotNoMax=3]{\Data}
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsubsection{Example for \texttt{changeOrder}}
%--------------------------------------------------------------------------------------
It is only possible to fill the region between two listplots 
with \verb+\pscustom+ if one of both has the values in a reverse
order. Otherwise we do not get a closed path. With the option \verb+ChangeOrder+
the values are used in a reverse order:

\begin{LTXexample}[pos=t,preset=\centering]
\begin{filecontents*}{test.dat}
  0 3 8 
  2 4 7
  5 5 5.5
  7 3.5 5
  10 2 9
\end{filecontents*}
\begin{psgraph}[axesstyle=frame,ticklinestyle=dotted,ticksize=0 10](0,0)(10,10){4in}{2in}%
   \readdata{\data}{test.dat}%
   \pscustom[fillstyle=solid,fillcolor=gray]{%
     \listplot[plotNo=2,plotNoMax=2]{\data}%
     \listplot[plotNo=1,plotNoMax=2,ChangeOrder]{\data}} 
\end{psgraph}
\end{LTXexample}





%--------------------------------------------------------------------------------------
\section{Polar plots}
%--------------------------------------------------------------------------------------

With the option \verb+polarplot=false|true+ it is possible to use \verb+\psplot+
in polar mode:
\begin{verbatim}
\psplot[polarplot=true,...]{<start angle>}{<end angle>}{<r(alpha)>}
\end{verbatim}

The equation in PostScript code is interpreted as a function $r=f(\alpha)$, e.g. for the
circle with radius 1 as $r=\sqrt{\sin^2x+\cos^2x}$:

\begin{verbatim}
x sin dup mul x cos dup mul add sqrt 
\end{verbatim}


\medskip
\begin{LTXexample}[width=6cm]
\resetOptions
\psset{plotpoints=200,unit=0.75}
\begin{pspicture}*(-5,-5)(3,3)
  \psaxes[labelsep=.75mm,arrowlength=1.75,ticksize=2pt,%
    labelFontSize=\footnotesize,%
    linewidth=0.17mm]{->}(0,0)(-4.99,-4.99)(3,3)
  \rput[Br](3,-.35){$x$}
  \rput[tr](-.15,3){$y$}
  \rput[Br](-.15,-.35){$0$}
  \psset{linewidth=.35mm,polarplot=true}
  \psplot[linecolor=red]{140}{310}{3 neg x sin mul x cos mul x sin 3 exp x cos 3 exp add div}
  \psplot[linecolor=cyan]{140}{310}{6 neg x sin mul x cos mul x sin 3 exp x cos 3 exp add div}
  \psplot[linecolor=blue]{140}{310}{9 neg x sin mul x cos mul x sin 3 exp x cos 3 exp add div}
\end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=5cm]
\resetOptions
\psset{plotpoints=200,unit=1}
\begin{pspicture}(-2.5,-2.5)(2.5,2.5)% Ulrich Dirr
 \psaxes[labelsep=.75mm,arrowlength=1.75,%
    ticksize=2pt,linewidth=0.17mm]{->}(0,0)(-2.5,-2.5)(2.5,2.5)
  \rput[Br](2.5,-.35){$x$}
  \rput[tr](-.15,2.5){$y$}
  \rput[Br](-.15,-.35){$0$}
  \psset{linewidth=.35mm,plotstyle=curve,polarplot=true}
  \psplot[linecolor=red]{0}{360}{x cos 2 mul x sin mul}
  \psplot[linecolor=green]{0}{360}{x cos 3 mul x sin mul}
  \psplot[linecolor=blue]{0}{360}{x cos 4 mul x sin mul}
\end{pspicture}
\end{LTXexample}



\medskip
\begin{LTXexample}[width=8cm]
\psset{plotpoints=200,unit=0.5}
\begin{pspicture}(-8.5,-8.5)(9,9)% Ulrich Dirr 
\psaxes[Dx=2,dx=2,Dy=2,dy=2,labelsep=.75mm,%
  arrowlength=1.75,ticksize=2pt,linewidth=0.17mm]{->}(0,0)(-8.5,-8.5)(9,9)
\rput[Br](9,-.7){$x$}
\rput[tr](-.3,9){$y$}
\rput[Br](-.3,-.7){$0$}
%
\psset{linewidth=.35mm,plotstyle=curve,polarplot=true}
\psplot[linecolor=blue]{0}{720}{8 2.5 x mul sin mul}
\end{pspicture}
\end{LTXexample}


\resetOptions

%--------------------------------------------------------------------------------------
\section{\CMD{pstScalePoints}}
%--------------------------------------------------------------------------------------
The syntax is
\begin{verbatim}
\pstScalePoints(xScale,xScale){xPS}{yPS}
\end{verbatim}

\verb+xScale,yScale+ are decimal values as scaling factors, the \verb+xPs+ and \verb+yPS+
are additional PostScript code to the x- and y-values of the data records. This macro
is only valid for the \CMD{listplot} macro! 

\resetOptions
\begin{LTXexample}[width=6cm]
\def\data{%
  0 0 1 3 2 4 3 1
  4 2 5 3 6 6 }
\begin{pspicture}(-0.5,-1)(6,6)
  \psaxes{->}(0,0)(6,6)
  \listplot[showpoints=true,%
    linecolor=red]{\data}
  \pstScalePoints(1,0.5){}{3 add}
  \listplot[showpoints=true,%
    linecolor=blue]{\data}
\end{pspicture}
\end{LTXexample}

\bigskip
\verb+\pstScalePoints(1,0.5){}{3 add}+ means that \textbf{first} the value $3$ is added
to the $y$ values and \textbf{second} this value is scaled with the factor $0.5$.
As seen for the blue line for $x=0$ we get $y(0)=(0+3)\cdot 0.5=1.5$.

Changes with \verb+\pstScalePoints+ are always global to all following \verb+\listplot+
macros. This is the reason why it is a good idea to reset the values at the end of the
\verb+pspicture+ environment.

\begin{verbatim}
\pstScalePoints(1,1){}{}
\end{verbatim}


%--------------------------------------------------------------------------------------
\part{New commands and environments}
%--------------------------------------------------------------------------------------

%--------------------------------------------------------------------------------------
\section{\texttt{psgraph} environment}
%--------------------------------------------------------------------------------------
This new environment does the scaling, it expects as parameter the values (without units!) for the
coordinate system and the values of the physical width and height (with units!). The syntax is:

\begin{verbatim}
\psgraph[<axes options>]{<arrows>}%
    (xOrig,yOrig)(xMin,yMin)(xMax,yMax){xLength}{yLength}
...
\endpsgraph

\begin{psgraph}[<axes options>]{<arrows>}%
    (xOrig,yOrig)(xMin,yMin)(xMax,yMax){xLength}{yLength}
...
\end{psgraph}
\end{verbatim}

where the options are valid \textbf{only} for the the \verb+\psaxes+ macro. The first
two arguments have the usual \verb+PSTricks+ behaviour.
\begin{itemize}
  \item if \verb+(xOrig,yOrig)+ is missing, it is substituted to  \verb+(xMin,xMax)+;
  \item if \verb+(xOrig,yOrig)+ \textbf{and} \verb+(xMin,yMin)+ are missing, they are both 
	substituted to \verb+(0,0)+.
\end{itemize}

The y-length maybe given as !, then the macro uses the same unit as for the x-axis.

%-----------------------------------------------------------------------------

\begin{center}
\readdata{\data}{demo1.dat}
\pstScalePoints(1,0.000001){}{}% (x,y){additional x operator}{y op}
\psset{llx=-1cm,lly=-1cm}
\begin{psgraph}[axesstyle=frame,xticksize=0 759,yticksize=0 25,%
    subticks=0,ylabelFactor={\cdot 10^6},%
    Dx=5,dy=100\psyunit,Dy=100](0,0)(25,750){10cm}{6cm} % parameters
   \listplot[linecolor=red,linewidth=2pt,showpoints=true]{\data}
\end{psgraph}
\end{center}

\begin{lstlisting}
\readdata{\data}{demo1.dat}
\pstScalePoints(1,0.000001){}{}% (x,y){additional x operator}{y op}
\psset{llx=-1cm,lly=-1cm}
§\ON§\begin{psgraph}§\OFF§[axesstyle=frame,xticksize=0 759,yticksize=0 25,%
    subticks=0,ylabelFactor={\cdot 10^6},%
    Dx=5,dy=100\psyunit,Dy=100](0,0)(25,750){10cm}{6cm} % parameters
   \listplot[linecolor=red,linewidth=2pt,showpoints=true]{\data}
§\ON§\end{psgraph}§\OFF§
\end{lstlisting}

%-----------------------------------------------------------------------------

In the following example, the y unit gets the same value as the one for the x-axis.
\begin{center}
\psset{llx=-1cm,lly=-0.5cm,ury=0.5cm}
\begin{psgraph}(0,0)(5,3){6cm}{!} % x-y-axis with same unit
   \psplot[linecolor=red,linewidth=1pt]{0}{5}{x dup mul 10 div}
\end{psgraph}
\end{center}

\begin{lstlisting}
\psset{llx=-1cm,lly=-0.5cm,ury=0.5cm}
\begin{psgraph}(0,0)(5,3){6cm}§\ON§{!}§\OFF§ % x-y-axis with same unit
   \psplot[linecolor=red,linewidth=1pt]{0}{5}{x dup mul 10 div}
\end{psgraph}
\end{lstlisting}

%-----------------------------------------------------------------------------

\begin{center}
\readdata{\data}{demo1.dat}
\psset{xAxisLabel=x-Axes,yAxisLabel=y-Axes,llx=-.5cm,ury=0.5cm%
   xAxisLabelPos={3cm,-1cm},yAxisLabelPos={-1.5cm,2.5cm}}
\pstScalePoints(1,0.00000001){}{}
\begin{psgraph}[axesstyle=frame,xticksize=0 7.5,yticksize=0 25,subticksize=1,%
     ylabelFactor={\cdot 10^8},Dx=5,Dy=1,xsubticks=2](0,0)(25,7.5){5.5cm}{5cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\end{psgraph}
\end{center}

\begin{lstlisting}
\readdata{\data}{demo1.dat}
\psset{§\ON§xAxisLabel§\OFF§=x-Axes,§\ON§yAxisLabel§\OFF§=y-Axes,llx=-.5cm,ury=0.5cm%
   §\ON§xAxisLabelPos§\OFF§={3cm,-1cm},§\ON§yAxisLabelPos§\OFF§={-1.5cm,2.5cm}}
\pstScalePoints(1,0.00000001){}{}
\begin{psgraph}[axesstyle=frame,xticksize=0 7.5,yticksize=0 25,subticksize=1,%
     §\ON§ylabelFactor§\OFF§={\cdot 10^8},Dx=5,Dy=1,xsubticks=2](0,0)(25,7.5){5.5cm}{5cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\end{psgraph}
\end{lstlisting}

%-----------------------------------------------------------------------------

\begin{LTXexample}[pos=t,preset=\centering]
\readdata{\data}{demo1.dat}
\psset{llx=-0.5cm,lly=-1cm}
\pstScalePoints(1,0.000001){}{}
\psgraph[arrows=->,Dx=5,dy=200\psyunit,Dy=200,%
    subticks=5,ticksize=-10pt 0,tickwidth=0.5pt,%
    subtickwidth=0.1pt](0,0)(25,750){5.5cm}{5cm}
\listplot[linecolor=red,linewidth=2pt,showpoints=true,]{\data}
\endpsgraph
\end{LTXexample}

%-----------------------------------------------------------------------------

\begin{center}
\readdata{\data}{demo1.dat}
\pstScalePoints(1,0.2){}{log}
\psset{lly=-0.75cm}
\psgraph[ylogBase=10,Dx=5,Dy=1,subticks=5](0,0)(25,2){12cm}{4cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\endpsgraph
\end{center}

\begin{lstlisting}
\readdata{\data}{demo1.dat}
\pstScalePoints(1,0.2){}{log}
\psset{lly=-0.75cm}
\psgraph[§\ON§ylogBase§\OFF§=10,Dx=5,Dy=1,subticks=5](0,0)(25,2){12cm}{4cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\endpsgraph
\end{lstlisting}

%-----------------------------------------------------------------------------

\begin{LTXexample}[pos=t,preset=\centering]
\readdata{\data}{demo0.dat}
\psset{lly=-0.75cm,ury=0.5cm}
\pstScalePoints(1,1){}{log}
\begin{psgraph}[arrows=->,Dx=0.5,ylogBase=10,Oy=-1,xsubticks=10,%
     ysubticks=2](0,-3)(3,1){12cm}{4cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\end{psgraph}
\end{LTXexample}


\begin{LTXexample}[pos=t,preset=\centering]
\psset{lly=-0.75cm,ury=0.5cm}
\readdata{\data}{demo0.dat}
\pstScalePoints(1,1){}{log}
\psgraph[arrows=->,Dx=0.5,ylogBase=10,Oy=-1,subticks=4](0,-3)(3,1){6cm}{3cm}
  \listplot[linecolor=red, linewidth=2pt, showpoints=true]{\data}
\endpsgraph
\end{LTXexample}


%-----------------------------------------------------------------------------
\begin{center}
\readdata{\data}{demo2.dat}%
\readdata{\dataII}{demo3.dat}%
\pstScalePoints(1,1){1989 sub}{}
\psset{llx=-0.5cm,lly=-1cm, xAxisLabel=Year,yAxisLabel=Whatever,%
     xAxisLabelPos={2in,-0.4in},yAxisLabelPos={-0.4in,1in}}
\psgraph[axesstyle=frame,Dx=2,Ox=1989,subticks=2](0,0)(12,6){4in}{2in}%
  \listplot[linecolor=red,linewidth=2pt]{\data}
  \listplot[linecolor=blue,linewidth=2pt]{\dataII}
  \listplot[linecolor=cyan,linewidth=2pt,yunit=0.5]{\dataII}
\endpsgraph
\end{center}

\begin{lstlisting}
\readdata{\data}{demo2.dat}%
\readdata{\dataII}{demo3.dat}%
\pstScalePoints(1,1){1989 sub}{}
\psset{llx=-0.5cm,lly=-1cm, §\ON§xAxisLabel§\OFF§=Year,§\ON§yAxisLabel§\OFF§=Whatever,%
     §\ON§xAxisLabelPos§\OFF§={2in,-0.4in},§\ON§yAxisLabelPos§\OFF§={-0.4in,1in}}
\psgraph[axesstyle=frame,Dx=2,Ox=1989,subticks=2](0,0)(12,6){4in}{2in}%
  \listplot[linecolor=red,linewidth=2pt]{\data}
  \listplot[linecolor=blue,linewidth=2pt]{\dataII}
  \listplot[linecolor=cyan,linewidth=2pt,yunit=0.5]{\dataII}
\endpsgraph
\end{lstlisting}
%-----------------------------------------------------------------------------

\begin{LTXexample}[pos=t,preset=\centering]
\readdata{\data}{demo2.dat}%
\readdata{\dataII}{demo3.dat}%
\psset{llx=-0.5cm,lly=-0.75cm}
\pstScalePoints(1,1){1989 sub}{2 sub}
\begin{psgraph}[axesstyle=frame,Dx=2,Ox=1989,Oy=2,subticks=2](0,0)(12,4){6in}{3in}%
  \listplot[linecolor=red,linewidth=2pt]{\data}
  \listplot[linecolor=blue,linewidth=2pt]{\dataII}
  \listplot[linecolor=cyan,linewidth=2pt,yunit=0.5]{\dataII}
\end{psgraph}
\end{LTXexample}

%\newpage
An example with ticks on every side of the frame:

\begin{center}
\def\data{0 0 1 1 2 4 3 9}
\psset{lly=-0.5cm}
\begin{psgraph}[axesstyle=frame,ticksize=0 4pt](0,0)(3.0,9.0){12cm}{5cm}
  \psaxes[axesstyle=frame,labels=none,ticksize=-4pt 0](3,9)(0,0)(3,9)
  \listplot[linecolor=red,linewidth=2pt]{\data}
\end{psgraph}
\end{center}

\begin{lstlisting}
\def\data{0 0 1 1 2 4 3 9}
\psset{lly=-0.5cm}
\begin{psgraph}[axesstyle=frame,ticksize=0 4pt](0,0)(3.0,9.0){12cm}{5cm}
  \psaxes[axesstyle=frame,labels=none,ticksize=-4pt 0](3,9)(0,0)(3,9)
  \listplot[linecolor=red,linewidth=2pt]{\data}
\end{psgraph}
\end{lstlisting}


%-------------------------------------------------------------------------------------------
\subsection{The new options}
%-------------------------------------------------------------------------------------------

\begin{center}
\begin{tabular}{>{\tt}l>{\tt}ll}
\textrm{name} & \textrm{default} & meaning\\\hline
xAxisLabel & x & label for the x-axis\\
yAxisLabel & y & label for the y-axis\\
xAxisLabelPos & \{\} & where to put the x-label\\
yAxisLabelPos & \{\} & where to put the y-label\\
llx & 0pt & trim for the lower left x\\
lly & 0pt & trim for the lower left y\\
urx & 0pt & trim for the upper right x\\
ury & 0pt & trim for the upper right y
\end{tabular}
\end{center}

There is one restriction in using the trim parameters, they must been set
\textbf{before} \verb+psgraph+ is called. They are senseless, when using
as parameters of \verb+psgraph+ itself.

\medskip
\resetOptions

\begin{center}
\readdata{\data}{demo2.dat}%
\readdata{\dataII}{demo3.dat}%
\psset{llx=-1cm,lly=-1.25cm,urx=0.5cm,ury=0.1in,xAxisLabel=Year,%
   yAxisLabel=Whatever,xAxisLabelPos={.4\linewidth,-0.4in},%
   yAxisLabelPos={-0.4in,2in}}
\pstScalePoints(1,1){1989 sub}{}
\psframebox[linestyle=dashed,boxsep=0pt]{%
\begin{psgraph}[axesstyle=frame,Ox=1989,subticks=2](0,0)(12,6){0.8\linewidth}{2.5in}%
  \listplot[linecolor=red,linewidth=2pt]{\data}%
  \listplot[linecolor=blue,linewidth=2pt]{\dataII}%
  \listplot[linecolor=cyan,linewidth=2pt,yunit=0.5]{\dataII}%
\end{psgraph}%
}
\end{center}


\begin{lstlisting}
\readdata{\data}{demo2.dat}%
\readdata{\dataII}{demo3.dat}%
\psset{llx=-1cm,lly=-1.25cm,urx=0.5cm,ury=0.1in,xAxisLabel=Year,%
   yAxisLabel=Whatever,xAxisLabelPos={.4\linewidth,-0.4in},%
   yAxisLabelPos={-0.4in,2in}}
\pstScalePoints(1,1){1989 sub}{}
\psframebox[linestyle=dashed,boxsep=0pt]{%
\begin{psgraph}[axesstyle=frame,Ox=1989,subticks=2](0,0)(12,6){0.8\linewidth}{2.5in}%
  \listplot[linecolor=red,linewidth=2pt]{\data}%
  \listplot[linecolor=blue,linewidth=2pt]{\dataII}%
  \listplot[linecolor=cyan,linewidth=2pt,yunit=0.5]{\dataII}%
\end{psgraph}%
}
\end{lstlisting}


\pstScalePoints(1,1){}{}% reset


%--------------------------------------------------------------------------------------
\subsection{Problems}
%--------------------------------------------------------------------------------------
Floating point operations in \TeX\ are a real mess, which causes a lot of problems
when there are very small oder very big units. With the options of \verb+\pst-plot+
it is possible to choose normal units (whatever this may be ...), but plotting
the data as usual.

\begin{LTXexample}[pos=t]
\begin{filecontents*}{test.dat}
3.2345 34.5
3.2364 65.4
3.2438 50.2
\end{filecontents*}

\psset{lly=-0.5cm,llx=-1cm}
\readdata{\data}{test.dat}
\pstScalePoints(1,1){3.23 sub 100 mul}{}
\begin{psgraph}[Ox=3.23,Dx=0.01,dx=\psxunit,Dy=10](0,0)(3,70){0.8\linewidth}{5cm}%
  \listplot[showpoints=true,plotstyle=curve]{\data}
\end{psgraph}
\end{LTXexample}

This example shows some important facts:
\begin{itemize}
\item \verb+3.23 sub 100 mul+: the x values are now $0.45; 0.64; 1.38$
\item \verb+Ox=3.23+: the origin of the x axis is set to $3.23$
\item \verb+Dx=0.01+: the increment of the labels
\item \verb+dx=\psxunit+: uses the calculated unit value to get every unit a label
\item \verb+Dy=10+: increase the y labels by 10
\end{itemize}

Using the internal \verb+\psxunit+ one can have dynamical x-units, depending to
the linewidth od the document.

\resetOptions

%--------------------------------------------------------------------------------------
\section{\CMD{psStep}}
%--------------------------------------------------------------------------------------
\verb+\psStep+ caclulates a step function for the upper or lower sum or the max/min
of the Riemann integral definition of a given function. The available option is

\verb+StepType=lower|upper|Riemann+

with \verb+lower+ as the default setting. The syntax of the function is

\verb+\psStep[options](x1,x2){n}{function}+


(x1,x2) is the given Intervall for the step wise caculated function,
n is the number of the rectangles and \verb+function+ is the mathematical function
in postfix or algebraic notation (with \verb+algebraic=true+).

\begin{center}
\bgroup
\begin{pspicture}(-0.5,-0.5)(10,3) \psaxes{->}(10,3)
 \psplot[plotpoints=100,linewidth=1.5pt,algebraic,%
    labelFontSize=\footnotesize]{0}{10}{sqrt(x)}
 \psStep[linecolor=magenta,StepType=upper,fillstyle=hlines](0,9){9}{x sqrt}
 \psStep[linecolor=blue,fillstyle=vlines](0,9){9}{x sqrt }
\end{pspicture}

\psset{plotpoints=200}
\begin{pspicture}(-0.5,-2.25)(10,3)  \psaxes{->}(0,0)(0,-2.25)(10,3)
 \psplot[linewidth=1.5pt,algebraic,labelFontSize=\footnotesize]{0}{10}{sqrt(x)*sin(x)}
 \psStep[algebraic,linecolor=magenta,StepType=upper](0,9){20}{sqrt(x)*sin(x)}
 \psStep[linecolor=blue,linestyle=dashed](0,9){20}{x sqrt x RadtoDeg sin mul}
\end{pspicture}

\psset{yunit=1.25cm}
\begin{pspicture}(-0.5,-1.5)(10,1.5) \psaxes{->}(0,0)(0,-1.5)(10,1.5)
 \psStep[algebraic,StepType=Riemann,fillstyle=solid,fillcolor=black!10](0,10){50}%
    {sqrt(x)*cos(x)*sin(x)}
 \psplot[linewidth=1.5pt,algebraic,labelFontSize=\footnotesize]%
    {0}{10}{sqrt(x)*cos(x)*sin(x)}
\end{pspicture}

\psset{unit=1.5cm}
\begin{pspicture}[plotpoints=200](-0.5,-3)(10,2.5) 
  \psStep[algebraic,fillstyle=solid,fillcolor=yellow](0.001,9.5){40}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \psStep[algebraic,StepType=Riemann,fillstyle=solid,fillcolor=blue](0.001,9.5){40}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \psaxes{->}(0,0)(0,-2.75)(10,2.5)
  \psplot[algebraic,linecolor=white,labelFontSize=\footnotesize]%
    {0.001}{9.75}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \uput[90](6,1.2){$f(x)=2\cdot\sqrt{x}\cdot\cos{(\ln{x})}\cdot\sin{x}$}
\end{pspicture}
\egroup
\end{center}


\begin{lstlisting}
\begin{pspicture}(-0.5,-0.5)(10,3) \psaxes{->}(10,3)
 \psplot[plotpoints=100,linewidth=1.5pt,algebraic,%
    labelFontSize=\footnotesize]{0}{10}{sqrt(x)}
 \psStep[linecolor=magenta,§\ON§StepType=upper§\OFF§,fillstyle=hlines](0,9){9}{x sqrt}
 \psStep[linecolor=blue,fillstyle=vlines](0,9){9}{x sqrt }
\end{pspicture}

\psset{plotpoints=200}
\begin{pspicture}(-0.5,-2.25)(10,3)  \psaxes{->}(0,0)(0,-2.25)(10,3)
 \psplot[linewidth=1.5pt,algebraic,labelFontSize=\footnotesize]{0}{10}{sqrt(x)*sin(x)}
 \psStep[algebraic,linecolor=magenta,StepType=upper](0,9){20}{sqrt(x)*sin(x)}
 \psStep[linecolor=blue,linestyle=dashed](0,9){20}{x sqrt x RadtoDeg sin mul}
\end{pspicture}

\psset{yunit=1.25cm}
\begin{pspicture}(-0.5,-1.5)(10,1.5) \psaxes{->}(0,0)(0,-1.5)(10,1.5)
 \psStep[§\ON§algebraic§\OFF§,§\ON§StepType=Riemann§\OFF§,fillstyle=solid,fillcolor=black!10](0,10){50}%
    {sqrt(x)*cos(x)*sin(x)}
 \psplot[linewidth=1.5pt,algebraic,labelFontSize=\footnotesize]%
    {0}{10}{sqrt(x)*cos(x)*sin(x)}
\end{pspicture}

\psset{unit=1.5cm}
\begin{pspicture}[plotpoints=200](-0.5,-3)(10,2.5) 
  \psStep[algebraic,fillstyle=solid,fillcolor=yellow](0.001,9.5){40}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \psStep[algebraic,StepType=Riemann,fillstyle=solid,fillcolor=blue](0.001,9.5){40}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \psaxes{->}(0,0)(0,-2.75)(10,2.5)
  \psplot[algebraic,linecolor=white,labelFontSize=\footnotesize]%
    {0.001}{9.75}{2*sqrt(x)*cos(ln(x))*sin(x)}
  \uput[90](6,1.2){$f(x)=2\cdot\sqrt{x}\cdot\cos{(\ln{x})}\cdot\sin{x}$}
\end{pspicture}
\end{lstlisting}


%--------------------------------------------------------------------------------------
\section[\CMD{psplotTangent}]{\CMD{psplotTangent}}
%--------------------------------------------------------------------------------------
There is an additional option, named \verb+Derive+ vor an alternative function (see
following example) to calculate the slope of the tangent. This will be in general the
first derivation, but can also be any other function. If this option is different to
to the default value  \verb+Derive=default+,
then this function is taken to calculate the slope. For the other cases, \verb+pstricks-add+
builds a secant with -0.00005<x<0.00005, calculates the slope and takes this for the
tangent. This maybe problematic in some cases of special functions or $x$ values, then it may be appropriate to use the
Derivate option.

The macro expects three parameters:

\begin{description}
\item[$x$]: the $x$ value of the function for which the tangent should be calculated
\item[$dx$]: the $dx$ to both sides of the $x$ value
\item[$f(x)$]: the function in infix (with option \verb+algebraic+) or the default 
postfix (PostScript) notation 
\end{description}

The following examples show the use of the algebraic option together with the Derive option.
Remember that using the \verb+algebraic+ option implies that the angles have to be in the
radian unit!

\begin{center}
\bgroup
\def\F{x RadtoDeg dup dup cos exch 2 mul cos add exch 3 mul cos add}
\def\Fp{x RadtoDeg dup dup sin exch 2 mul sin 2 mul add exch 3 mul sin 3 mul add neg}
\psset{plotpoints=1001}
\begin{pspicture}(-7.5,-2.5)(7.5,4)%X\psgrid
  \psaxes{->}(0,0)(-7.5,-2)(7.5,3.5)
  \psplot[linewidth=3\pslinewidth]{-7}{7}{\F}
  \psset{linecolor=red, arrows=<->, arrowscale=2}
  \multido{\n=-7+1}{8}{\psplotTangent{\n}{1}{\F}}
  \psset{linecolor=magenta, arrows=<->, arrowscale=2}%
  \multido{\n=0+1}{8}{\psplotTangent[linecolor=blue, Derive=\Fp]{\n}{1}{\F}}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\def\F{x RadtoDeg dup dup cos exch 2 mul cos add exch 3 mul cos add}
\def\Fp{x RadtoDeg dup dup sin exch 2 mul sin 2 mul add exch 3 mul sin 3 mul add neg}
\psset{plotpoints=1001}
\begin{pspicture}(-7.5,-2.5)(7.5,4)%X\psgrid
  \psaxes{->}(0,0)(-7.5,-2)(7.5,3.5)
  \psplot[linewidth=3\pslinewidth]{-7}{7}{\F}
  \psset{linecolor=red, arrows=<->, arrowscale=2}
  \multido{\n=-7+1}{8}{\psplotTangent{\n}{1}{\F}}
  \psset{linecolor=magenta, arrows=<->, arrowscale=2}%
  \multido{\n=0+1}{8}{\psplotTangent[linecolor=blue, §\ON§Derive=\Fp§\OFF§]{\n}{1}{\F}}
\end{pspicture}
\end{lstlisting}


\begin{center}
\bgroup
\def\Falg{cos(x)+cos(2*x)+cos(3*x)}   \def\Fpalg{-sin(x)-2*sin(2*x)-3*sin(3*x)}
\begin{pspicture}(-7.5,-2.5)(7.5,4)%\psgrid
  \psaxes{->}(0,0)(-7.5,-2)(7.5,3.5)
  \psplot[linewidth=1.5pt,algebraic,plotpoints=500]{-7.5}{7.5}{\Falg}
  \multido{\n=-7+1}{8}{\psplotTangent[linecolor=red,arrows=<->,arrowscale=2,algebraic]{\n}{1}{\Falg}}
  \multido{\n=0+1}{8}{\psplotTangent[linecolor=magenta,%
     arrows=<->,arrowscale=2,algebraic,Derive={\Fpalg}]{\n}{1}{\Falg}}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\def\Falg{cos(x)+cos(2*x)+cos(3*x)}   \def\Fpalg{-sin(x)-2*sin(2*x)-3*sin(3*x)}
\begin{pspicture}(-7.5,-2.5)(7.5,4)%\psgrid
  \psaxes{->}(0,0)(-7.5,-2)(7.5,3.5)
  \psplot[linewidth=1.5pt,algebraic,plotpoints=500]{-7.5}{7.5}{\Falg}
  \multido{\n=-7+1}{8}{\psplotTangent[linecolor=red,arrows=<->,arrowscale=2,algebraic]{\n}{1}{\Falg}}
  \multido{\n=0+1}{8}{\psplotTangent[linecolor=magenta,%
     arrows=<->,arrowscale=2,algebraic,§\ON§Derive={\Fpalg}§\OFF§]{\n}{1}{\Falg}}
\end{pspicture}
\end{lstlisting}

The next example shows the use of \verb+Derive+ option to draw the perpendicular line of the
tangent.

\begin{LTXexample}[width=8cm,wide]
\begin{pspicture}(-0.5,-0.5)(7.25,7.25)
  \def\Func{10 x div}
  \psaxes[arrowscale=1.5]{->}(7,7)
  \psplot[linewidth=2pt,algebraic]{1.5}{5}{10/x}
  \psplotTangent[linewidth=.5\pslinewidth,linecolor=red,algebraic]{3}{2}{10/x}
  \psplotTangent[linewidth=.5\pslinewidth,linecolor=blue,algebraic,Derive=(x*x)/10]{3}{2}{10/x}
  \psline[linestyle=dashed](!0 /x 3 def \Func)(!3 /x 3 def \Func)(3,0)
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\subsection{A \texttt{polarplot} example}
%--------------------------------------------------------------------------------------

Let's work with the classical cardioid : $\rho=2(1+\cos(\theta))$
and $\displaystyle \frac{d\rho}{d\theta}=-2\sin(\theta)$. The Derive option always expects the
$\frac{d\rho}{d\theta}$ value and uses internally the equation for the derivation of implicit 
defined functions:

\[
\frac{dy}{dx}=\frac{\rho\prime\cdot\sin\theta + x}{\rho\prime\cdot\cos\theta - y}
\]
where $x=r\cdot\cos\theta$ and $y=r\cdot\sin\theta$


\begin{LTXexample}[width=6cm,wide]
\begin{pspicture}(-1,-3)(5,3)%\psgrid[subgridcolor=lightgray]
  \psaxes{->}(0,0)(-1,-3)(5,3)
  \psplot[polarplot,linewidth=3\pslinewidth,linecolor=blue,%
     plotpoints=500]{0}{360}{1 x cos add 2 mul}
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6cm,wide]
\begin{pspicture}(-1,-3)(5,3)%\psgrid[subgridcolor=lightgray]
  \psaxes{->}(0,0)(-1,-3)(5,3)
  \psplot[polarplot,linewidth=3\pslinewidth,linecolor=blue,plotpoints=500]{0}{360}{1 x cos add 2 mul}
  \multido{\n=0+36}{10}{%
     \psplotTangent[polarplot,linecolor=red,arrows=<->]{\n}{1.5}{1 x cos add 2 mul} }
\end{pspicture}
\end{LTXexample}

\begin{LTXexample}[width=6cm,wide]
\begin{pspicture}(-1,-3)(5,3)%\psgrid[subgridcolor=lightgray]
  \psaxes{->}(0,0)(-1,-3)(5,3)
  \psplot[polarplot,linewidth=3\pslinewidth,linecolor=blue,algebraic,plotpoints=500]{0}{6.289}{2*(1+cos(x))}
  \multido{\r=0.000+0.314}{21}{%
     \psplotTangent[polarplot,Derive=-2*sin(x),algebraic,linecolor=red,arrows=<->]{\r}{1.5}{2*(1+cos(x))} }
\end{pspicture}
\end{LTXexample}



%--------------------------------------------------------------------------------------
\subsection{A \CMD{parametricplot} example}
%--------------------------------------------------------------------------------------

Let's work with a Lissajou curve : 
 $\displaystyle\left\{\begin{array}{l}x=3.5\cos(2t)\\y=3.5\sin(6t)\end{array}\right.$
whose derivative is :
 $\displaystyle\left\{\begin{array}{l}x=-7\sin(2t)\\y=21\cos(6t)\end{array}\right.$

The parameter must be the letter $t$ instead of $x$ and when using the \verb+algebraic+ option
divide the two equations by a | (see example).

\begin{LTXexample}[pos=t,wide]
\def\Lissa{t dup 2 RadtoDeg mul cos 3.5 mul exch 6 mul RadtoDeg sin 3.5 mul}%
\psset{yunit=0.6}
\begin{pspicture}(-4,-4)(4,6)
  \parametricplot[plotpoints=500,linewidth=3\pslinewidth]{0}{3.141592}{\Lissa}
  \multido{\r=0.000+0.314}{11}{%
    \psplotTangent[linecolor=red,arrows=<->]{\r}{1.5}{\Lissa} }
  \multido{\r=0.157+0.314}{11}{%
    \psplotTangent[linecolor=blue,arrows=<->]{\r}{1.5}{\Lissa} }
\end{pspicture}\hfill%
\def\LissaAlg{3.5*cos(2*t)|3.5*sin(6*t)}  \def\LissaAlgDer{-7*sin(2*t)|21*cos(6*t)}%
\begin{pspicture}(-4,-4)(4,6)
  \parametricplot[algebraic,plotpoints=500,linewidth=3\pslinewidth]{0}{3.141592}{\LissaAlg}
  \multido{\r=0.000+0.314}{11}{%
    \psplotTangent[algebraic,linecolor=red,arrows=<->]{\r}{1.5}{\LissaAlg} }
  \multido{\r=0.157+0.314}{11}{%
    \psplotTangent[algebraic,linecolor=blue,arrows=<->,%
       Derive=\LissaAlgDer]{\r}{1.5}{\LissaAlg} }
\end{pspicture}
\end{LTXexample}



\resetOptions

\section{Successive derivatives of a function}

The new PostScript function \verb$Derive$ has been added for plotting 
the succesive derivatives of a
function. It must be used wiht the \verb|algebaic| option. This function has two
arguments:

\begin{enumerate}
\item a positive integer with define the order of the derivative, obviously $0$ means the
  function itself!
\item a function of variable $x$ which can be any function using the common operators,
\end{enumerate}

Do not think that the derivative is approximated, the internal PostScript engine will
compute the real derivative using a formal derivative engine.

The following diagram contains the plot of the polynomial:

\[ f(x)=\sum_{i=0}^{14}\frac{(-1)^{i}x^{2i}}{i!}=1-\frac{x^2}{2}+\frac{x^4}{4!}-\frac{x^6}{6!}+\frac{x^8}{8!}-
          \frac{x^{10}}{10!}+\frac{x^{12}}{12!}-\frac{x^{14}}{14!}\]

and of its 15 first derivatives. It is the sequence definition of the cosine.


\begin{LTXexample}[pos=t,wide,preset=\centering]
\psset{unit=2}
\def\getColor#1{\ifcase#1 Tan\or RedOrange\or magenta\or yellow\or green\or Orange\or blue\or
  DarkOrchid\or BrickRed\or Rhodamine\or OliveGreen\or Goldenrod\or Mahogany\or
  OrangeRed\or CarnationPink\or RoyalPurple\or Lavender\fi}
\begin{pspicture}[showgrid=true](0,-1.2)(7,1.5)
  \psclip{\psframe[linestyle=none](0,-1.1)(7,1.1)}
  \multido{\in=0+1}{16}{%
     \psplot[linewidth=1pt,algebraic=true,linecolor=\getColor{\in},linewidth=1pt]{0}{7}
      {Derive(\in,1-x^2/2+x^4/24-x^6/720+x^8/40320-x^10/3628800+x^12/479001600-x^14/87178291200)}}
  \endpsclip
\end{pspicture}
\end{LTXexample}
  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%  \subsection{Other examples}


\begin{LTXexample}[width=3.5cm]
\begin{pspicture}[shift=-2.5,showgrid=true,linewidth=1pt](0,-2)(3,3)
  \psplot[algebraic=true]{.001}{3}{x*ln(x)}  % f(x)
  \psplot[algebraic=true,linecolor=red]{.05}{3}{Derive(1,x*ln(x))} % f'(x)=1+ln(x)
\end{pspicture}
\end{LTXexample}


\section{Variable step for plotting a curve}
\subsection{Theory}

As you know with the \verb$\psplot$ macro, the curve is plotted using a piece wise
linear curve. The step is given by the parameter \texttt{plotpoints}. For
each step between $x_i$ and $x_{i+1}$, the area defined between the curve and its
approximation (a segment) is majored by this formula :

\begin{minipage}[m]{.5\linewidth}
\[|\varepsilon|\le\frac{M_2(f)(x_{i+1}-x_i)^3}{12}\]

$M_2(f)$ is a majorant of the second derivative of $f$ in the interval $[x_i;x_{i+1}]$.
\end{minipage}
{\psset{unit=1cm, showpoints=false}
\begin{pspicture}[shift=-2,showgrid=true](0,-1)(6,3)
  \pscurve(0,0)(1,1)(3,2.2)(5,2)(6,1)\psline(1,1)(5,2)
  \psline(.5,0)(5.5,0)\psline(1,0)(1,1)\psline(5,0)(5,2)
  \rput[t](1,-.1){$x_n$}\rput[t](5,-.1){$x_{n+1}$}
  \psclip{\pscustom{\psecurve(0,0)(1,1)(3,2.2)(5,2)(6,1)\psline(5,2)}}
    \psframe[fillstyle=solid, fillcolor=gray](0,0)(5,5)
  \endpsclip
  \rput*(3,1.8){$\varepsilon$}
\end{pspicture}}

The parameter \verb$VarStep$ (\verb$false$ by default) activates the variable step
algorithm. It is set to a tolerance defines by the parameter \verb$VarStepEpsilon$
(\verb+default+ by default, accept real value). If this parameter is not set by the
user, then it is automatically computed using the default first step given by the
parameter \verb+plotpoints+. Then, for each step, $f''(x_n)$ and $f''(x_{n+1})$ are
computed and the smaller is used as $M_2(f)$, and then the step is approximated. This
means that the step is constant for a second order polynomials.

  %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
  \subsection{The cosine}

  Different value for the tolerance from $0.01$ to $0.000\,1$, a factor $10$ between
  each of them. In black, there is the classical \verb+psplot+ behavior, and in
  magenta the default variable step behavior.

\begin{center}
\bgroup
\psset{algebraic=true, VarStep=true, unit=2, showpoints=true, linecolor=red}
\begin{pspicture}(-0,-1)(3.14,2)\psgrid
  \psplot[VarStepEpsilon=.01]{0}{3.14}{cos(x)}
  \psplot[VarStepEpsilon=.001]{0}{3.14}{cos(x)+.15}
  \psplot[VarStepEpsilon=.0001]{0}{3.14}{cos(x)+.3}
  \psplot[linecolor=magenta]{0}{3.14}{cos(x)+.45}
  \psplot[VarStep=false, linewidth=2\pslinewidth, linecolor=black]{-0}{3.14}{cos(x)+.6}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{algebraic=true, VarStep=true, unit=2, showpoints=true, linecolor=red}
\begin{pspicture}[showgrid=true](-0,-1)(3.14,2)
  \psplot[VarStepEpsilon=.01]{0}{3.14}{cos(x)}
  \psplot[VarStepEpsilon=.001]{0}{3.14}{cos(x)+.15}
  \psplot[VarStepEpsilon=.0001]{0}{3.14}{cos(x)+.3}
  \psplot[linecolor=magenta]{0}{3.14}{cos(x)+.45}
  \psplot[VarStep=false,linewidth=1pt,linecolor=black]{-0}{3.14}{cos(x)+.6}
\end{pspicture}
\end{lstlisting}


\subsection{The neperian Logarithm}

A really classical example wich gives a bad beginning, the tolerance is set to $0.001$.

\begin{center}
\bgroup
\psset{algebraic=true, VarStep=true, linecolor=red, showpoints=true}
\begin{pspicture}[showgrid=true](0,-5)(16,4)
  \psplot[VarStep=false, linecolor=black]{.01}{16}{ln(x)+1}
  \psplot[linecolor=magenta]{.51}{16}{ln(x-1/2)+1/2}
  \psplot[VarStepEpsilon=.001]{1.01}{16}{ln(x-1)}
  \psplot[VarStepEpsilon=.01]{1.51}{16}{ln(x-1.5)-100/200}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{algebraic=true, VarStep=true, linecolor=red, showpoints=true}
\begin{pspicture}[showgrid=true](0,-5)(16,4)
  \psplot[VarStep=false, linecolor=black]{.01}{16}{ln(x)+1}
  \psplot[linecolor=magenta]{.51}{16}{ln(x-1/2)+1/2}
  \psplot[VarStepEpsilon=.001]{1.01}{16}{ln(x-1)}
  \psplot[VarStepEpsilon=.01]{1.51}{16}{ln(x-1.5)-100/200}
\end{pspicture}
\end{lstlisting}


\clearpage
\subsection{Sinus of the inverse of $x$}
Impossible to draw, but let's try!

\begin{center}
\bgroup
\psset{xunit=64,algebraic,VarStep,linecolor=red,showpoints=true,linewidth=1pt}
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.0001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.00001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.000001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStep=false, linecolor=black]{.01}{.25}{sin(1/x)}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{xunit=64,algebraic,VarStep,linecolor=red,showpoints=true,linewidth=1pt}
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.0001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.00001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStepEpsilon=.000001]{.01}{.25}{sin(1/x)}
\end{pspicture}\\
\begin{pspicture}[showgrid=true](0,-1)(.5,1)
  \psplot[VarStep=false, linecolor=black]{.01}{.25}{sin(1/x)}
\end{pspicture}
\end{lstlisting}





\subsection{A really complex function}

Just appreciate the difference between the normal behavior and the plotting with the
\texttt{varStep} option. The function is :

\[f(x)=x-\frac{x^2}{10}+\ln(x)+\cos(2x)+\sin(x^2)-1\]

\begin{center}
\bgroup
\psset{xunit=3, algebraic, VarStep, showpoints=true}
\begin{pspicture}[showgrid=true](0,-2)(5,6)
  \psplot[VarStepEpsilon=.0005, linecolor=red]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)}
  \psplot[linecolor=magenta]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)+.5}
  \psplot[VarStep=false]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)-1}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{xunit=3, algebraic, VarStep, showpoints=true}
\begin{pspicture}[showgrid=true](0,-2)(5,6)
  \psplot[VarStepEpsilon=.0005, linecolor=red]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)}
  \psplot[linecolor=magenta]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)+.5}
  \psplot[VarStep=false]{.1}{5}{x-x^2/10+ln(x)+cos(2*x)+sin(x^2)-1}
\end{pspicture}
\end{lstlisting}


\subsection{A hyperbola}

\begin{center}
\bgroup
\psset{algebraic=true, showpoints=true, unit=0.75}
\begin{pspicture}(-5,-4)(9,6)
  \psplot[linecolor=black]{-5}{1.8}{(x-1)/(x-2)}
  \psplot[VarStep=true, VarStepEpsilon=.001, linecolor=red]{2.2}{9}{(x-1)/(x-2)}
  \psaxes{->}(0,0)(-5,-4)(9,6)
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{algebraic=true, showpoints=true, unit=0.75}
\begin{pspicture}(-5,-4)(9,6)
  \psplot[linecolor=black]{-5}{1.8}{(x-1)/(x-2)}
  \psplot[VarStep=true, VarStepEpsilon=.001, linecolor=red]{2.2}{9}{(x-1)/(x-2)}
  \psaxes{->}(0,0)(-5,-4)(9,6)
\end{pspicture}
\end{lstlisting}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\subsection{Successive derivatives of a polynom}

\begin{center}
\bgroup
\psset{unit=2, algebraic=true, VarStep=true, showpoints=true, VarStepEpsilon=.001}
\def\getColor#1{\ifcase#1 Tan\or RedOrange\or magenta\or yellow\or green\or Orange\or blue\or
  DarkOrchid\or BrickRed\or Rhodamine\or OliveGreen\or Goldenrod\or Mahogany\or
  OrangeRed\or CarnationPink\or RoyalPurple\or Lavender\fi}
\begin{pspicture}[showgrid=true](0,-1.2)(7,1.5)
  \psclip{\psframe[linestyle=none](0,-1.1)(7,1.1)}
  \multido{\in=0+1}{16}{%
    \psplot[algebraic=true, linecolor=\getColor{\in}]{0.1}{7}
    {Derive(\in,Sum(i,0,1,7,(-1)^i*x^(2*i)/Fact(2*i)))}}
  \endpsclip
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=2, algebraic=true, VarStep=true, showpoints=true, VarStepEpsilon=.001}
\def\getColor#1{\ifcase#1 Tan\or RedOrange\or magenta\or yellow\or green\or Orange\or blue\or
  DarkOrchid\or BrickRed\or Rhodamine\or OliveGreen\or Goldenrod\or Mahogany\or
  OrangeRed\or CarnationPink\or RoyalPurple\or Lavender\fi}
\begin{pspicture}[showgrid=true](0,-1.2)(7,1.5)
  \psclip{\psframe[linestyle=none](0,-1.1)(7,1.1)}
  \multido{\in=0+1}{16}{%
    \psplot[algebraic=true, linecolor=\getColor{\in}]{0.1}{7}
    {Derive(\in,Sum(i,0,1,7,(-1)^i*x^(2*i)/Fact(2*i)))}}
  \endpsclip
\end{pspicture}
\end{lstlisting}


\subsection{The variable step algorithm together with the \texttt{IfTE} primitive}

\begin{center}
\bgroup
\psset{unit=1.5, algebraic, VarStep, showpoints=true, VarStepEpsilon=.001}
\begin{pspicture}[showgrid=true](-7,-2)(2,4)
  \psplot{-7}{2}{IfTE(x<-5,-(x+5)^3/2,IfTE(x<0,0,x^2))}
  \psplot{-7}{2}{5*x/9+26/9}
  \psplot[linecolor=blue]{-7}{2}{(x+7)^30/9^30*4.5-1/2}
  \psplot[linecolor=red]{-6.9}{2}
      {IfTE(x<-6,ln(x+7),IfTE(x<-3,x+6,IfTE(x<0.1415926,sin(x+3)+3,3.1415926-x)))}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=1.5, algebraic, VarStep, showpoints=true, VarStepEpsilon=.001}
\begin{pspicture}[showgrid=true](-7,-2)(2,4)
  \psplot{-7}{2}{IfTE(x<-5,-(x+5)^3/2,IfTE(x<0,0,x^2))}
  \psplot{-7}{2}{5*x/9+26/9}
  \psplot[linecolor=blue]{-7}{2}{(x+7)^30/9^30*4.5-1/2}
  \psplot[linecolor=red]{-6.9}{2}
      {IfTE(x<-6,ln(x+7),IfTE(x<-3,x+6,IfTE(x<0.1415926,sin(x+3)+3,3.1415926-x)))}
\end{pspicture}
\end{lstlisting}



\subsection{Using \CMD{parametricplot}}

\begin{center}
\bgroup
\psset{unit=2.5}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=red,VarStep=true, showpoints=true,
                VarStepEpsilon=.0001]
                {-3.14}{3.14}{cos(3*t)|sin(2*t)}
\end{pspicture}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=blue,VarStep=true, showpoints=false,
                VarStepEpsilon=.0001]
                {-3.14}{3.14}{cos(3*t)|sin(2*t)}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=3}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=red,VarStep=true, showpoints=true,
                VarStepEpsilon=.0001]
                {-3.14}{3.14}{cos(3*t)|sin(2*t)}
\end{pspicture}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=blue,VarStep=true, showpoints=false,
                VarStepEpsilon=.0001]
                {-3.14}{3.14}{cos(3*t)|sin(2*t)}
\end{pspicture}
\end{lstlisting}


\begin{center}
\bgroup
\psset{unit=2.5}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=red,VarStep=true, showpoints=true,
                VarStepEpsilon=.0001]
                {0}{47.115}{cos(5*t)|sin(3*t)}
\end{pspicture}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=blue,VarStep=true, showpoints=false,
                VarStepEpsilon=.0001]
                {0}{47.115}{cos(5*t)|sin(3*t)}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=2.5}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=red,VarStep=true, showpoints=true,
                VarStepEpsilon=.0001]
                {0}{47.115}{cos(5*t)|sin(3*t)}
\end{pspicture}
\begin{pspicture}[showgrid=true](-1,-1)(1,1)
\parametricplot[algebraic=true,linecolor=blue,VarStep=true, showpoints=false,
                VarStepEpsilon=.0001]
                {0}{47.115}{cos(5*t)|sin(3*t)}
\end{pspicture}
\end{lstlisting}


\begin{center}
\bgroup
\psset{xunit=.5}
\begin{pspicture}[showgrid=true](0,0)(12.566,2)
\parametricplot[algebraic,linecolor=red,VarStep, showpoints=true,
        VarStepEpsilon=.01]{0}{12.566}{t+cos(-t-PI/2)|1+sin(-t-PI/2)}
\end{pspicture}
%
\begin{pspicture}[showgrid=true](0,0)(12.566,2)
\parametricplot[algebraic,linecolor=blue,VarStep, showpoints=false,
        VarStepEpsilon=.001]{0}{12.566}{t+cos(-t-PI/2)|1+sin(-t-PI/2)}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{xunit=.5}
\begin{pspicture}[showgrid=true](0,0)(12.566,2)
\parametricplot[algebraic,linecolor=red,VarStep, showpoints=true,
        VarStepEpsilon=.01]{0}{12.566}{t+cos(-t-PI/2)|1+sin(-t-PI/2)}
\end{pspicture}
%
\begin{pspicture}[showgrid=true](0,0)(12.566,2)
\parametricplot[algebraic,linecolor=blue,VarStep, showpoints=false,
        VarStepEpsilon=.001]{0}{12.566}{t+cos(-t-PI/2)|1+sin(-t-PI/2)}
\end{pspicture}
\end{lstlisting}


\resetOptions


\section{New math functions and their derivative}

\subsection{The inverse sin and its derivative}

\begin{center}
\bgroup
\psset{unit=1.5}
\begin{pspicture}[showgrid=true](-1,-2)(1,2)
  \psplot[linecolor=blue,algebraic]{-1}{1}{asin(x)}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,-2)(1,2)
  \psplot[linecolor=blue]{-.999}{.999}{asin(x)}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-1,0)(1,4)
  \psplot[linecolor=blue]{-.97}{.97}{Derive(1,asin(x))}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.0001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,0)(1,4)
  \psplot[linecolor=blue]{-.97}{.97}{Derive(1,asin(x))}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=1.5}
\begin{pspicture}[showgrid=true](-1,-2)(1,2)
  \psplot[linecolor=blue,algebraic]{-1}{1}{asin(x)}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,-2)(1,2)
  \psplot[linecolor=blue]{-.999}{.999}{asin(x)}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-1,0)(1,4)
  \psplot[linecolor=red]{-.97}{.97}{Derive(1,asin(x))}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.0001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,0)(1,4)
  \psplot[linecolor=red]{-.97}{.97}{Derive(1,asin(x))}
\end{pspicture}
\end{lstlisting}


\subsection{The inverse cosine and its derivative}

\begin{center}
\bgroup
\psset{unit=1.5}
\begin{pspicture}[showgrid=true](-1,0)(1,3)
  \psplot[linecolor=blue,algebraic]{-1}{1}{acos(x)}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,0)(1,3)
  \psplot[linecolor=blue]{-.999}{.999}{acos(x)}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-1,-4)(1,-1)
  \psplot[linecolor=blue]{-.97}{.97}{Derive(1,acos(x))}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.0001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,-4)(1,-1)
  \psplot[linecolor=blue]{-.97}{.97}{Derive(1,acos(x))}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{unit=1.5}
\begin{pspicture}[showgrid=true](-1,0)(1,3)
  \psplot[linecolor=blue,algebraic]{-1}{1}{acos(x)}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,0)(1,3)
  \psplot[linecolor=blue]{-.999}{.999}{acos(x)}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-1,-4)(1,-1)
  \psplot[linecolor=red]{-.97}{.97}{Derive(1,acos(x))}
\end{pspicture}
\hspace{1em}
\psset{algebraic, VarStep, VarStepEpsilon=.0001, showpoints=true}
\begin{pspicture}[showgrid=true](-1,-4)(1,-1)
  \psplot[linecolor=red]{-.97}{.97}{Derive(1,acos(x))}
\end{pspicture}
\end{lstlisting}



\subsection{The inverse tangente and its derivative}

\begin{center}
\bgroup
\begin{pspicture}[showgrid=true](-4,-2)(4,2)
\psset{algebraic=true}
  \psplot[linecolor=blue,linewidth=1pt]{-4}{4}{atg(x)}
  \psplot[linecolor=red,VarStep, VarStepEpsilon=.0001, showpoints=true]{-4}{4}{Derive(1,atg(x))}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-4,-2)(4,2)
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=blue]{-4}{4}{atg(x)}
  \psplot[linecolor=red]{-4}{4}{Derive(1,atg(x))}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\begin{pspicture}[showgrid=true](-4,-2)(4,2)
\psset{algebraic=true}
  \psplot[linecolor=blue,linewidth=1pt]{-4}{4}{atg(x)}
  \psplot[linecolor=red,VarStep, VarStepEpsilon=.0001, showpoints=true]{-4}{4}{Derive(1,atg(x))}
\end{pspicture}
\hspace{1em}
\begin{pspicture}[showgrid=true](-4,-2)(4,2)
\psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=blue]{-4}{4}{atg(x)}
  \psplot[linecolor=red]{-4}{4}{Derive(1,atg(x))}
\end{pspicture}
\end{lstlisting}

\subsection{Hyperbolique functions}

\begin{center}
\bgroup
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{sh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{ch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{th(x)}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\hspace{1em}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{sh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{ch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{th(x)}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{sh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{ch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{th(x)}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\hspace{1em}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{sh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{ch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{th(x)}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\end{lstlisting}



\begin{center}
\bgroup
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{Derive(1,sh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{Derive(1,ch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{Derive(1,th(x))}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\hspace{1em}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{Derive(1,sh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{Derive(1,ch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{Derive(1,th(x))}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true,linewidth=1pt}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{Derive(1,sh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{Derive(1,ch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{Derive(1,th(x))}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\hspace{1em}
\begin{pspicture}(-3,-4)(3,4)
\psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-2}{2}{Derive(1,sh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{-2}{2}{Derive(1,ch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-3}{3}{Derive(1,th(x))}
  \psaxes{->}(0,0)(-3,-4)(3,4)
\end{pspicture}
\end{lstlisting}



\begin{center}
\bgroup
\begin{pspicture}(-7,-3)(7,3)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Argsh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{1}{7}{Argch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-.99}{.99}{Argth(x)}
  \psaxes{->}(0,0)(-7,-3)(7,3)
\end{pspicture}\\[\baselineskip]
\begin{pspicture}(-7,-3)(7,3)
  \psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Argsh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{1.001}{7}{Argch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-.99}{.99}{Argth(x)}
  \psaxes{->}(0,0)(-7,-3)(7,3)
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\begin{pspicture}(-7,-3)(7,3)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Argsh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{1}{7}{Argch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-.99}{.99}{Argth(x)}
  \psaxes{->}(0,0)(-7,-3)(7,3)
\end{pspicture}\\[\baselineskip]
\begin{pspicture}(-7,-3)(7,3)
  \psset{algebraic, VarStep, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Argsh(x)}
  \psplot[linecolor=blue,linewidth=1pt]{1.001}{7}{Argch(x)}
  \psplot[linecolor=green,linewidth=1pt]{-.99}{.99}{Argth(x)}
  \psaxes{->}(0,0)(-7,-3)(7,3)
\end{pspicture}
\end{lstlisting}



\begin{center}
\bgroup
\begin{pspicture}(-7,-0.5)(7,6)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Derive(1,Argsh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{1.014}{7}{Derive(1,Argch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-.9}{.9}{Derive(1,Argth(x))}
  \psaxes{->}(0,0)(-7,0)(7,6)
\end{pspicture}\\[\baselineskip]
\begin{pspicture}(-7,-0.5)(7,6)
\psset{algebraic=true}
  \psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Derive(1,Argsh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{1.014}{7}{Derive(1,Argch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-.9}{.9}{Derive(1,Argth(x))}
  \psaxes{->}(0,0)(-7,0)(7,6)
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\begin{pspicture}(-7,-0.5)(7,6)
\psset{algebraic=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Derive(1,Argsh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{1.014}{7}{Derive(1,Argch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-.9}{.9}{Derive(1,Argth(x))}
  \psaxes{->}(0,0)(-7,0)(7,6)
\end{pspicture}\\[\baselineskip]
\begin{pspicture}(-7,-0.5)(7,6)
\psset{algebraic=true}
  \psset{algebraic=true, VarStep=true, VarStepEpsilon=.001, showpoints=true}
  \psplot[linecolor=red,linewidth=1pt]{-7}{7}{Derive(1,Argsh(x))}
  \psplot[linecolor=blue,linewidth=1pt]{1.014}{7}{Derive(1,Argch(x))}
  \psplot[linecolor=green,linewidth=1pt]{-.9}{.9}{Derive(1,Argth(x))}
  \psaxes{->}(0,0)(-7,0)(7,6)
\end{pspicture}
\end{lstlisting}

\clearpage
%--------------------------------------------------------------------------------------
\section[\CMD{psplotDiffEqn} -- solving diffential equations]{\CMD{psplotDiffEqn} -- solving diffential equations}
%--------------------------------------------------------------------------------------


 A differential euqation of first order is like

\begin{align} y^\prime=f(x,y,y^\prime) \end{align}


where $y$ is a function of  $x$. We define some vectors $Y=[y, y', \cdots , y^{(n-1)}]$ 
und $Y^\prime=[y^\prime, y^{\prime\prime}, \cdots , y^{n}]$, depending to the order $n$. 
The syntax of the macro is

\begin{verbatim}
\psplotDiffEqn[options]{x0}{x1}{y0}{f(x,y,y',...)}
\end{verbatim}

\begin{itemize}\setlength\itemsep{0pt}\setlength\parsep{0pt}\setlength\parskip{0pt}
\item \verb+options+: the \verb+\psplotDiffEqn+ specific options and all other of PSTricks, which
make sense;
\item $x_0$: the start value;
\item $x_1$: the end value of the definition interval;
\item $y_0$: the initial values for $y(x_0)\ y'(x_0)\ \ldots$;
\item $f(x,y,y',...)$: the differential equation, depending to the number of initial values, e.g.:
    \verb+{0 1}+ for $y_0$ are two initial values, so that we have a differential equation of
    second order $f(x,y,y')$ and the macro leaves $y\ y'$ on the stack.
\end{itemize}

The new options are:


\begin{itemize}\setlength\itemsep{0pt}\setlength\parsep{0pt}\setlength\parskip{0pt}
\item \param{method}: integration method (\verb+euler+ for order 1 euler method, \verb+rk4+ for
  4\textsuperscript{th} order Runge-Kutta method);
\item \param{whichabs}: select the abscissa for plotting the graph, by default it is
  $x$, but you can specify a number which represent a position in the vector $y$;
\item \param{whichord}: same as precedent for the ordinate, by default $y(0)$;
\item \param{plotfuncx}: describe a ps function for the abscissa, parameter
  \param{whichabs} becomes useless;
\item \param{plotfuncy}: idem for ordoinate;
\item \param{buildvector}: boolean parameter for specifying the input-output of the
  $f$ description:
  \begin{description}
  \item[\texttt{true}] (default): $y$ is put on the stack element by element, $y'$
    must be given in the same way;
  \item[\texttt{false}]: $y$ is put on the stack as a vector, $y'$ must be returned
  in the same way;
  \end{description}

\item \param{algebraic}: algebraic description for $f$, \param{buildvector}
  parameter is useless when activating this option.
\end{itemize}



\subsection{Variable step for differential equations}

A new algorithm has been added for adjusting the step according to the variations of
the curve. The parameter \verb+method+ has a new possible value : \verb+varrkiv+ to
activate the \textsc{Runge-Kutta} method with variable step, then the parameter
\verb+varsteptol+ (real value; \verb+.01+ by default) can control the tolerance of
the algortihm.

\begin{center}
\bgroup
\def\Funct{neg}\def\FunctAlg{-y[0]}
\psset{xunit=1.5, yunit=8, showpoints=true}
\begin{pspicture}[showgrid=true](0,0)(10,1.2)
  \psplot[linewidth=6\pslinewidth, linecolor=green, showpoints=false]{0}{10}{2.71828182846 x neg exp}
  \psplotDiffEqn[linecolor=magenta, method=varrkiv, varsteptol=.1, plotpoints=2]{0}{10}{1}{\Funct}
  \rput(0,.0){\psplotDiffEqn[linecolor=blue, method=varrkiv, varsteptol=.01, plotpoints=2]{0}{10}{1}{\Funct}}
  \rput(0,.1){\psplotDiffEqn[linecolor=Orange, method=varrkiv, varsteptol=.001, plotpoints=2]{0}{10}{1}{\Funct}}
  \rput(0,.2){\psplotDiffEqn[linecolor=red, method=varrkiv, varsteptol=.0001, plotpoints=2]{0}{10}{1}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(3.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](3.3,.9){\small RK ordre 4 : $\varepsilon<10^{-1}$}
  \rput*(3.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](3.3,.8){\small RK ordre 4 : $\varepsilon<10^{-2}$}
  \rput*(3.3,.7){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](3.3,.7){\small RK ordre 4 : $\varepsilon<10^{-3}$}
  \rput*(3.3,.6){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](3.3,.6){\small RK ordre 4 : $\varepsilon<10^{-4}$}
  \rput*(3.3,.5){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](3.3,.5){\small solution exacte}
\end{pspicture}
\captionof{figure}{Equation $y'=-y$ with $y_0=1$.} \label{fig:minusexpvarstep}
\egroup
\end{center}


\begin{lstlisting}[wide=true]
\def\Funct{neg}\def\FunctAlg{-y[0]}
\psset{xunit=1.5, yunit=8, showpoints=true}
\begin{pspicture}[showgrid=true](0,0)(10,1.2)
  \psplot[linewidth=6\pslinewidth, linecolor=green, showpoints=false]{0}{10}{2.71828182846 x neg exp}
  \psplotDiffEqn[linecolor=magenta, method=varrkiv, varsteptol=.1, plotpoints=2]{0}{10}{1}{\Funct}
  \rput(0,.0){\psplotDiffEqn[linecolor=blue, method=varrkiv, varsteptol=.01, plotpoints=2]{0}{10}{1}{\Funct}}
  \rput(0,.1){\psplotDiffEqn[linecolor=Orange, method=varrkiv, varsteptol=.001, plotpoints=2]{0}{10}{1}{\Funct}}
  \rput(0,.2){\psplotDiffEqn[linecolor=red, method=varrkiv, varsteptol=.0001, plotpoints=2]{0}{10}{1}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(3.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](3.3,.9){\small RK ordre 4 : $\varepsilon<10^{-1}$}
  \rput*(3.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](3.3,.8){\small RK ordre 4 : $\varepsilon<10^{-2}$}
  \rput*(3.3,.7){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](3.3,.7){\small RK ordre 4 : $\varepsilon<10^{-3}$}
  \rput*(3.3,.6){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](3.3,.6){\small RK ordre 4 : $\varepsilon<10^{-4}$}
  \rput*(3.3,.5){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](3.3,.5){\small solution exacte}
\end{pspicture}
\end{lstlisting}



\begin{center}
\bgroup
\def\Funct{exch neg}
\psset{xunit=1.5, yunit=5, method=varrkiv, showpoints=true}%%
\def\quatrepi{12.5663706144}
\begin{pspicture}(0,-1)(10,1.3)
  \psaxes{->}(0,0)(0,-1)(10,1.3)
  \psplot[linewidth=4\pslinewidth, linecolor=green, algebraic=true]{0}{10}{cos(x)}
  \rput(0,.0){\psplotDiffEqn[linecolor=magenta, plotpoints=7, varsteptol=.1]{0}{10}{1 0}{\Funct}}
  \rput(0,.0){\psplotDiffEqn[linecolor=blue, plotpoints=201, varsteptol=.01]{0}{10}{1 0}{\Funct}}
  \rput(0,.1){\psplotDiffEqn[linewidth=2\pslinewidth, linecolor=red, varsteptol=.001]{0}{10}{1 0}{\Funct}}
  \rput(0,.2){\psplotDiffEqn[linecolor=black, varsteptol=.0001]{0}{10}{1 0}{\Funct}}
  \rput(0,.3){\psplotDiffEqn[linecolor=Orange, varsteptol=.00001]{0}{10}{1 0}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(2.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](2.3,.9){\small $\varepsilon<10^{-1}$}
  \rput*(2.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](2.3,.8){\small $\varepsilon<10^{-2}$}
  \rput*(2.3,.7){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](2.3,.7){\small $\varepsilon<10^{-3}$}
  \rput*(2.3,.6){\psline[linecolor=black](-.75cm,0)}
  \rput*[l](2.3,.6){\small $\varepsilon<10^{-4}$}
  \rput*(2.3,.5){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](2.3,.5){\small $\varepsilon<10^{-5}$}
  \rput*(2.3,.4){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](2.3,.4){\small solution exacte}
\end{pspicture}
\captionof{figure}{Equation $y''=-y$}\label{fig:trigfunc}
\egroup
\end{center}

\begin{lstlisting}[wide=true]
\def\Funct{exch neg}
\psset{xunit=1.5, yunit=5, method=varrkiv, showpoints=true}%%
\def\quatrepi{12.5663706144}
\begin{pspicture}(0,-1)(10,1.3)
  \psaxes{->}(0,0)(0,-1)(10,1.3)
  \psplot[linewidth=4\pslinewidth, linecolor=green, algebraic=true]{0}{10}{cos(x)}
  \rput(0,.0){\psplotDiffEqn[linecolor=magenta, plotpoints=7, varsteptol=.1]{0}{10}{1 0}{\Funct}}
  \rput(0,.0){\psplotDiffEqn[linecolor=blue, plotpoints=201, varsteptol=.01]{0}{10}{1 0}{\Funct}}
  \rput(0,.1){\psplotDiffEqn[linewidth=2\pslinewidth, linecolor=red, varsteptol=.001]{0}{10}{1 0}{\Funct}}
  \rput(0,.2){\psplotDiffEqn[linecolor=black, varsteptol=.0001]{0}{10}{1 0}{\Funct}}
  \rput(0,.3){\psplotDiffEqn[linecolor=Orange, varsteptol=.00001]{0}{10}{1 0}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(2.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](2.3,.9){\small $\varepsilon<10^{-1}$}
  \rput*(2.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](2.3,.8){\small $\varepsilon<10^{-2}$}
  \rput*(2.3,.7){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](2.3,.7){\small $\varepsilon<10^{-3}$}
  \rput*(2.3,.6){\psline[linecolor=black](-.75cm,0)}
  \rput*[l](2.3,.6){\small $\varepsilon<10^{-4}$}
  \rput*(2.3,.5){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](2.3,.5){\small $\varepsilon<10^{-5}$}
  \rput*(2.3,.4){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](2.3,.4){\small solution exacte}
\end{pspicture}
\end{lstlisting}




\begin{center}
\bgroup
\def\Funct{exch}
\psset{xunit=4, yunit=1, method=varrkiv, showpoints=true}%%
\def\quatrepi{12.5663706144}
\begin{pspicture}(0,-0.5)(3,11)
  \psaxes{->}(0,0)(3,11)
  \psplot[linewidth=4\pslinewidth, linecolor=green, algebraic=true]{0}{3}{ch(x)}
  \rput(0,.0){\psplotDiffEqn[linecolor=magenta, varsteptol=.1]{0}{3}{1 0}{\Funct}}
  \rput(0,.3){\psplotDiffEqn[linecolor=blue, varsteptol=.01]{0}{3}{1 0}{\Funct}}
  \rput(0,.6){\psplotDiffEqn[linecolor=red, varsteptol=.001]{0}{3}{1 0}{\Funct}}
  \rput(0,.9){\psplotDiffEqn[linecolor=black, varsteptol=.0001]{0}{3}{1 0}{\Funct}}
  \rput(0,1.2){\psplotDiffEqn[linecolor=Orange, varsteptol=.00001]{0}{3}{1 0}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(2.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](2.3,.9){\small $\varepsilon<10^{-1}$}
  \rput*(2.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](2.3,.8){\small $\varepsilon<10^{-2}$}
  \rput*(2.3,.7){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](2.3,.7){\small $\varepsilon<10^{-3}$}
  \rput*(2.3,.6){\psline[linecolor=black](-.75cm,0)}
  \rput*[l](2.3,.6){\small $\varepsilon<10^{-4}$}
  \rput*(2.3,.5){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](2.3,.5){\small $\varepsilon<10^{-5}$}
  \rput*(2.3,.4){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](2.3,.4){\small solution exacte}
\end{pspicture}
\captionof{figure}{Equation $y''=y$}
\egroup
\end{center}

\begin{lstlisting}[wide=true]
\def\Funct{exch}
\psset{xunit=4, yunit=1, method=varrkiv, showpoints=true}%%
\def\quatrepi{12.5663706144}
\begin{pspicture}(0,-0.5)(3,11)
  \psaxes{->}(0,0)(3,11)
  \psplot[linewidth=4\pslinewidth, linecolor=green, algebraic=true]{0}{3}{ch(x)}
  \rput(0,.0){\psplotDiffEqn[linecolor=magenta, varsteptol=.1]{0}{3}{1 0}{\Funct}}
  \rput(0,.3){\psplotDiffEqn[linecolor=blue, varsteptol=.01]{0}{3}{1 0}{\Funct}}
  \rput(0,.6){\psplotDiffEqn[linecolor=red, varsteptol=.001]{0}{3}{1 0}{\Funct}}
  \rput(0,.9){\psplotDiffEqn[linecolor=black, varsteptol=.0001]{0}{3}{1 0}{\Funct}}
  \rput(0,1.2){\psplotDiffEqn[linecolor=Orange, varsteptol=.00001]{0}{3}{1 0}{\Funct}}
  \psset{linewidth=4\pslinewidth,showpoints=false}
  \rput*(2.3,.9){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](2.3,.9){\small $\varepsilon<10^{-1}$}
  \rput*(2.3,.8){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](2.3,.8){\small $\varepsilon<10^{-2}$}
  \rput*(2.3,.7){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](2.3,.7){\small $\varepsilon<10^{-3}$}
  \rput*(2.3,.6){\psline[linecolor=black](-.75cm,0)}
  \rput*[l](2.3,.6){\small $\varepsilon<10^{-4}$}
  \rput*(2.3,.5){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](2.3,.5){\small $\varepsilon<10^{-5}$}
  \rput*(2.3,.4){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](2.3,.4){\small solution exacte}
\end{pspicture}
\end{lstlisting}





\subsection{Equation of second order}

Here is the traditionnal simulation of two stars attracting each other according to
the classical gravitation law in $\displaystyle\frac{1}{r^2}$. In 2-Dimensions, the system to be
solved is composed of four second order differential equations. In order to be
described, each of them gives two first order equations, then we obtain a 8 sized vectorial
equation. In the following example the masses of the stars are 1 and 20.

\[
\left\{
\begin{array}[m]{l}
  x''_1=\displaystyle\frac{M_2}{r^2}\cos(\theta)\\
  y''_1=\displaystyle\frac{M_2}{r^2}\sin(\theta)\\
  x''_2=\displaystyle\frac{M_1}{r^2}\cos(\theta)\\
  y''_2=\displaystyle\frac{M_1}{r^2}\sin(\theta)\\
\end{array}
\right.
\mbox{ avec }
\left\{
\begin{array}[m]{l}
  r^2=(x_1-x_2)^2+(y_1-y_2)^2\\
  \cos(\theta)=\displaystyle\frac{(x_1-x_2)}{r}\\
  \sin(\theta)=\displaystyle\frac{(y_1-y_2)}{r}\\
\end{array}
\right.
\mbox{%
\begin{pspicture}[shift=-2](5,4)\psset{arrowscale=2}
  \psframe[linewidth=.75\pslinewidth](5,4)
  \pstGeonode[PosAngle={-90,90}](1,1){M_1}(4,3){M_2}
  \pstHomO[HomCoef=.33, PointSymbol=none]{M_1}{M_2}[F_1]
  \psline[arrows=->](M_1)(F_1)
  \pstHomO[HomCoef=.33, PointSymbol=none]{M_2}{M_1}[F_2]
  \psline[arrows=->, arrowscale=2](M_2)(F_2)
  \pstGeonode[PointSymbol=none, PointName=none](M_2|M_1){A}
  \psline[linewidth=.5\pslinewidth](M_1)(A)
  \pstMarkAngle{A}{M_1}{M_2}{$\theta$}
  \ncline[linewidth=.5\pslinewidth, offset=.5, arrows=<->]{M_1}{M_2}
  \ncput*{$r$}
\end{pspicture}}
\]

\begin{table}[!htbp]
  \centering\small
    \begin{tabular}{|l@{}>{\ttfamily}l@{}>{ \ttfamily \%\% }l|}
      \hline
      && x1 y1 x'1 y'1 x2 y2 x'2 y'2\\
      &/yp2 exch def /xp2 exch def /ay2 exch def /ax2 exch def&mise en variables\\
      &/yp1 exch def /xp1 exch def /ay1 exch def /ax1 exch def&mise en variables\\
      &/ro2 ax2 ax1 sub dup mul ay2 ay1 sub dup mul add def&calcul de r*r\\
      &xp1 yp1&\\
      &ax2 ax1 sub ro2 sqrt div ro2 div&calcul de x''1\\
      &ay2 ay1 sub ro2 sqrt div ro2 div&calcul de y''1\\
      &xp2 yp2&\\
      &3 index -20 mul&calcul de x''2=-20x''1\\
      &3 index -20 mul&calcul de y''2=-20y''1\\
      \hline
    \end{tabular}
    \caption{\PostScript source code for the gravitational interaction}\label{intgravcode}
\end{table}

\begin{table}[!htbp]
  \centering
    \small\newcommand{\POW}{\symbol{'136}}
    \begin{tabular}{|l@{}>{\ttfamily}l@{}>{ \ttfamily \%\% }l|}
      \hline
      &y[2]|&y'[0]\\
      &y[3]|&y'[1]\\
      &(y[4]-y[0])/((y[4]-y[0])\POW 2+(y[5]-y[1])\POW 2)\POW 1.5|&y'[2]=y''[0]\\
      &(y[5]-y[1])/((y[4]-y[0])\POW 2+(y[5]-y[1])\POW 2)\POW 1.5|&y'[3]=y''[1]\\
      &y[6]|&y'[4]\\
      &y[7]|&y'[5]\\
      &20*(y[0]-y[4])/((y[4]-y[0])\POW 2+(y[5]-y[1])\POW 2)\POW 1.5|&y'[6]=y''[4]\\
      &20*(y[1]-y[5])/((y[4]-y[0])\POW 2+(y[5]-y[1])\POW 2)\POW 1.5&y'[7]=y''[5]\\
      \hline
    \end{tabular}
    \caption{Algebraic description for the gravitational interaction}\label{intgravalgcode}
\end{table}

\newcommand\Grav{%
  /yp2 exch def /xp2 exch def /ay2 exch def /ax2 exch def
  /yp1 exch def /xp1 exch def /ay1 exch def /ax1 exch def
  /ro2 ax2 ax1 sub dup mul ay2 ay1 sub dup mul add def
  xp1 yp1
  ax2 ax1 sub ro2 sqrt div ro2 div
  ay2 ay1 sub ro2 sqrt div ro2 div
  xp2 yp2
  3 index -20 mul
  3 index -20 mul}
\newcommand\GravAlg{%
  y[2]|y[3]|%
  (y[4]-y[0])/((y[4]-y[0])^2+(y[5]-y[1])^2)^1.5|%
  (y[5]-y[1])/((y[4]-y[0])^2+(y[5]-y[1])^2)^1.5|%
  y[6]|y[7]|%
  20*(y[0]-y[4])/((y[4]-y[0])^2+(y[5]-y[1])^2)^1.5|%
  20*(y[1]-y[5])/((y[4]-y[0])^2+(y[5]-y[1])^2)^1.5}
%%  0  1   2   3  4  5   6   7
%% x1 y1 x'1 y'1 x2 y2 x'2 y'2


\begin{LTXexample}[width=5cm,wide]
\def\InitCond{ 1  1  .1  0 -1 -1  -2   0}
\begin{pspicture}[shift=-2,showgrid=true](-3,-1.75)(2,1.5)
  \psplotDiffEqn[whichabs=0, whichord=1, linecolor=blue, method=rk4, plotpoints=100]{0}{3.95}{\InitCond}{\Grav}
  \psset{showpoints=true,whichabs=4, whichord=5}
  \psplotDiffEqn[linecolor=black, method=varrkiv, varsteptol=.0001, plotpoints=200]{0}{3.9}{\InitCond}{\Grav}
\end{pspicture}
\end{LTXexample}
\vspace{-2ex}
\captionof{figure}{Gravitational interaction : fixed landmark, trajectory of the stars}\label{fig:InterGravRepFix}



\bigskip
\begin{LTXexample}[width=5cm,wide]
\def\InitCond{ 1  1  .1  0 -1 -1  -2   0}
\begin{pspicture}[shift=-1.5,showgrid=true](-4,-1.75)(1,1)
  \psplotDiffEqn[linecolor=red, plotpoints=200,method=varrkiv, varsteptol=.0001, showpoints=true,
      plotfuncx=y dup 4 get exch 0 get sub,
      plotfuncy=dup 5 get exch 1 get sub ]{0}{3.9}{\InitCond}{\Grav}
\end{pspicture}
\end{LTXexample}
\vspace{-2ex}
\captionof{figure}{Gravitational interaction : landmark defined by one star}\label{fig:IGnewrep}


\begin{center}
\bgroup
\def\InitCond{ 1  1  .1   0 -1 -1  -2   0}
\psset{xunit=2}
\begin{pspicture}[showgrid=true](0,0)(8,9)
  \psset{showpoints=true}
  \psplotDiffEqn[linecolor=red, method=varrkiv, plotpoints=2, varsteptol=.0001,
      plotfuncy=dup 6 get dup mul exch 7 get dup mul add sqrt]{0}{8}{\InitCond}{\Grav}
  \psplotDiffEqn[linecolor=blue, method=varrkiv, plotpoints=2, varsteptol=.0001,
      plotfuncy=dup 2 get dup mul exch 3 get dup mul add sqrt]{0}{8}{\InitCond}{\Grav}
\end{pspicture}
\egroup
\captionof{figure}{Gravitational interaction : vitessesspeed of the stars}
\end{center}

\begin{lstlisting}
\psset{xunit=2}
\begin{pspicture}[showgrid=true](0,0)(8,9)
  \psset{showpoints=true}
  \psplotDiffEqn[linecolor=red, method=varrkiv, plotpoints=2, varsteptol=.0001,
      plotfuncy=dup 6 get dup mul exch 7 get dup mul add sqrt]{0}{8}{\InitCond}{\Grav}
  \psplotDiffEqn[linecolor=blue, method=varrkiv, plotpoints=2, varsteptol=.0001,
      plotfuncy=dup 2 get dup mul exch 3 get dup mul add sqrt]{0}{8}{\InitCond}{\Grav}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{Simple equation of first order $y'=y$}
%--------------------------------------------------------------------------------------

For the initial value $y(0)=1$ we have the solution $y(x)=e^x$. $y$ is always
on the stack, so we have to do nothing. Using the \verb+algebraic+ option, we write it
as \verb$y[0]$. The following example shows different solutions depending to the number of plotpoints
with $y_0=1$:


\begin{center}
\bgroup
\psset{xunit=4, yunit=.4}
\begin{pspicture}(3,19)\psgrid[subgriddiv=1]
  \psplot[linewidth=6\pslinewidth, linecolor=green]{0}{3}{Euler x exp}
  \psplotDiffEqn[linecolor=magenta,plotpoints=16,algebraic=true]{0}{3}{1}{y[0]}
  \psplotDiffEqn[linecolor=blue,plotpoints=151]{0}{3}{1}{}
  \psplotDiffEqn[linecolor=red,method=rk4,plotpoints=15]{0}{3}{1}{}
  \psplotDiffEqn[linecolor=Orange,method=rk4,plotpoints=4]{0}{3}{1}{}
  \psset{linewidth=4\pslinewidth}
  \rput*(0.35,19){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](0.35,19){\small Euler order 1 $h=0{,}2$}
  \rput*(0.35,17){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](0.35,17){\small Euler order 1 $h=0{,}02$}
  \rput*(0.35,15){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](0.35,15){\small RK ordre 4 $h=1$}
  \rput*(0.35,13){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](0.35,13){\small RK ordre 4 $h=0{,}2$}
  \rput*(0.35,11){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](0.35,11){\small solution exacte}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{xunit=4, yunit=.4}
\begin{pspicture}(3,19)\psgrid[subgriddiv=1]
  \psplot[linewidth=6\pslinewidth, linecolor=green]{0}{3}{Euler x exp}
  \psplotDiffEqn[linecolor=magenta,plotpoints=16,algebraic=true]{0}{3}{1}{y[0]}
  \psplotDiffEqn[linecolor=blue,plotpoints=151]{0}{3}{1}{}
  \psplotDiffEqn[linecolor=red,method=rk4,plotpoints=15]{0}{3}{1}{}
  \psplotDiffEqn[linecolor=Orange,method=rk4,plotpoints=4]{0}{3}{1}{}
  \psset{linewidth=4\pslinewidth}
  \rput*(0.35,19){\psline[linecolor=magenta](-.75cm,0)}
  \rput*[l](0.35,19){\small Euler order 1 $h=0{,}2$}
  \rput*(0.35,17){\psline[linecolor=blue](-.75cm,0)}
  \rput*[l](0.35,17){\small Euler order 1 $h=0{,}02$}
  \rput*(0.35,15){\psline[linecolor=Orange](-.75cm,0)}
  \rput*[l](0.35,15){\small RK ordre 4 $h=1$}
  \rput*(0.35,13){\psline[linecolor=red](-.75cm,0)}
  \rput*[l](0.35,13){\small RK ordre 4 $h=0{,}2$}
  \rput*(0.35,11){\psline[linecolor=green](-.75cm,0)}
  \rput*[l](0.35,11){\small solution exacte}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{$y'=\displaystyle\frac{2-ty}{4-t^2}$}% $
%--------------------------------------------------------------------------------------

For the initial value $y(0)=1$ the exact solution is $y(x)=\displaystyle\frac{t+\sqrt{4-t^2}}{2}$.
The function $f$ described in PostScript code is like (y ist still on the stack):
\begin{verbatim}
x              %% y x
mul            %% x*y
2 exch sub     %% 2-x*y
4 x dup mul    %% 2-x*y 4 x^2
sub            %% 2-x*y 4-x^2
div            %% (2-x*y)/(4-x^2)
\end{verbatim}
\noindent
The following example uses $y_0=1$.

\begin{verbatim}
\newcommand{\InitCond}{1}
\newcommand{\Func}{x mul 2 exch sub 4 x dup mul sub div}
\newcommand{\FuncAlg}{(2-x*y[0])/(4-x^2)}
\end{verbatim}

\begin{center}
\bgroup
\psset{xunit=6.4, yunit=9.6, showpoints=false}
\begin{pspicture}(0,1)(2,1.5)  \psgrid[griddots=10](0,1)(2,1.5)
  { \psset{linewidth=4\pslinewidth,linecolor=lightgray}
  \psplot{0}{1.8}{x dup dup mul 4 exch sub sqrt add 2 div}
  \psplot{1.8}{2}{x dup dup mul 4 exch sub sqrt add 2 div} }
  \def\InitCond{1}
  \def\Func{x mul 2 exch sub 4 x dup mul sub div}
  \psplotDiffEqn[linecolor=magenta, plotpoints=20]{0}{1.9}{\InitCond}{\Func}
  \psplotDiffEqn[linecolor=blue, plotpoints=191]{0}{1.9}{\InitCond}{\Func}
  \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11,%
     algebraic=true]{0}{1.9}{\InitCond}{(2-x*y[0])/(4-x^2)}
  \psplotDiffEqn[linecolor=Orange, method=rk4, plotpoints=21,%
     algebraic=true]{0}{1.9}{\InitCond}{(2-x*y[0])/(4-x^2)}
  \psset{linewidth=4\pslinewidth}\small
  \rput*(0,1.4){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](0,1.4){Euler order 1 $h=0{,}1$}
  \rput*(0,1.35){\psline[linecolor=blue](-.75cm,0)}\rput*[l](0,1.35){Euler order 1 $h=0{,}01$}
  \rput*(0,1.3){\psline[linecolor=Orange](-.75cm,0)}\rput*[l](0,1.3){RK order 4 $h=0{,}19$}
  \rput*(0,1.25){\psline[linecolor=red](-.75cm,0)}\rput*[l](0,1.25){RK order 4 $h=0{,}095$}
  \rput*(0,1.2){\psline[linecolor=lightgray](-.75cm,0)}\rput*[l](0,1.2){exactly}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}[xrightmargin=-1cm,xleftmargin=-1cm]
\psset{xunit=6.4, yunit=9.6, showpoints=false}
\begin{pspicture}(0,1)(2,1.7)  \psgrid[subgriddiv=5]
  { \psset{linewidth=4\pslinewidth,linecolor=lightgray}
  \psplot{0}{1.8}{x dup dup mul 4 exch sub sqrt add 2 div}
  \psplot{1.8}{2}{x dup dup mul 4 exch sub sqrt add 2 div} }
  \def\InitCond{1}
  \def\Func{x mul 2 exch sub 4 x dup mul sub div}
  \psplotDiffEqn[linecolor=magenta, plotpoints=20]{0}{1.9}{\InitCond}{\Func}
  \psplotDiffEqn[linecolor=blue, plotpoints=191]{0}{1.9}{\InitCond}{\Func}
  \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11,%
     algebraic=true]{0}{1.9}{\InitCond}{(2-x*y[0])/(4-x^2)}
  \psplotDiffEqn[linecolor=Orange, method=rk4, plotpoints=21,%
     algebraic=true]{0}{1.9}{\InitCond}{(2-x*y[0])/(4-x^2)}
  \psset{linewidth=4\pslinewidth}
  \rput*(0.3,1.6){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](0.3,1.6){\small Euler order 1 $h=0{,}1$}
  \rput*(0.3,1.55){\psline[linecolor=blue](-.75cm,0)}\rput*[l](0.3,1.55){\small Euler order 1 $h=0{,}01$}
  \rput*(0.3,1.5){\psline[linecolor=Orange](-.75cm,0)}\rput*[l](0.3,1.5){\small RK order 4 $h=0{,}19$}
  \rput*(0.3,1.45){\psline[linecolor=red](-.75cm,0)}\rput*[l](0.3,1.45){\small RK order 4 $h=0{,}095$}
  \rput*(0.3,1.4){\psline[linecolor=lightgray](-.75cm,0)}\rput*[l](0.3,1.4){\small exactly}
\end{pspicture}
\end{lstlisting}


%--------------------------------------------------------------------------------------
\subsubsection{$y'=-2xy$}
%--------------------------------------------------------------------------------------

For $y(-1)=\frac{1}{e}$ we get $y(x)=e^{-x^2}$.

\begin{center}
\bgroup
\psset{unit=4}
\begin{pspicture}(-1,0)(3,1.1)\psgrid
  \psplot[linewidth=4\pslinewidth,linecolor=gray]{-1}{3}{Euler x dup mul neg exp}
  \psset{plotpoints=9}
  \psplotDiffEqn[linecolor=cyan]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psplotDiffEqn[linecolor=yellow, method=rk4]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psset{plotpoints=21}
  \psplotDiffEqn[linecolor=blue]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psplotDiffEqn[linecolor=Orange, method=rk4]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psset{linewidth=2\pslinewidth}
  \rput*(2,1){\psline[linecolor=Orange](-0.25,0)}
  \rput*[l](2,1){RK}
  \rput*(2,.9){\psline[linecolor=blue](-0.25,0)}
  \rput*[l](2,.9){\textsc{Euler}-1}
  \rput*(2,.8){\psline[linecolor=gray](-0.25,0)}
  \rput*[l](2,.8){solution}
\end{pspicture}
\egroup
\end{center}


\begin{lstlisting}
\psset{unit=4}
\begin{pspicture}(-1,0)(3,1.1)\psgrid
  \psplot[linewidth=4\pslinewidth,linecolor=gray]{-1}{3}{Euler x dup mul neg exp}
  \psset{plotpoints=9}
  \psplotDiffEqn[linecolor=cyan]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psplotDiffEqn[linecolor=yellow, method=rk4]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psset{plotpoints=21}
  \psplotDiffEqn[linecolor=blue]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psplotDiffEqn[linecolor=Orange, method=rk4]{-1}{3}{1 Euler div}{x -2 mul mul}
  \psset{linewidth=2\pslinewidth}
  \rput*(2,1){\psline[linecolor=Orange](-0.25,0)}
  \rput*[l](2,1){RK}
  \rput*(2,.9){\psline[linecolor=blue](-0.25,0)}
  \rput*[l](2,.9){\textsc{Euler}-1}
  \rput*(2,.8){\psline[linecolor=gray](-0.25,0)}
  \rput*[l](2,.8){solution}
\end{pspicture}
\end{lstlisting}


%--------------------------------------------------------------------------------------
\subsubsection{Spirale of Cornu}
%--------------------------------------------------------------------------------------

The integrals of Fresnel :
\begin{align} x & =\int^t_0\cos\frac{\pi t^2}{2}\mathrm{d}t \\
 y & =\int^t_0\sin\frac{\pi t^2}{2}\mathrm{d}t \\
\intertext{with}
 \dot{x} &= \cos\frac{\pi t^2}{2} \\
 \dot{y} & =\sin\frac{\pi t^2}{2} 
 \end{align}

\begin{lstlisting}
\psset{unit=8}
\begin{pspicture}(1,1)\psgrid[subgriddiv=5]
  \psplotDiffEqn[whichabs=0,whichord=1,linecolor=red,method=rk4,algebraic,%
     plotpoints=500,showpoints=true]{0}{10}{0 0}{cos(Pi*x^2/2)|sin(Pi*x^2/2)}
\end{pspicture}
\end{lstlisting}


\begin{center}
\bgroup
\psset{unit=8}
\begin{pspicture}(1,1)\psgrid[subgriddiv=5]
  \psplotDiffEqn[whichabs=0,whichord=1,linecolor=red,method=rk4,algebraic,%
     plotpoints=500,showpoints=true]{0}{10}{0 0}{cos(Pi*x^2/2)|sin(Pi*x^2/2)}
\end{pspicture}
\egroup
\end{center}



%--------------------------------------------------------------------------------------
\subsubsection{Lotka-Volterra}
%--------------------------------------------------------------------------------------

The Lotka-Volterra model describes interactions between two species in an ecosystem, a predator and a prey. This represents our first multi-species model. Since we are considering two species, the model will involve two equations, one which describes how the prey population changes and the second which describes how the predator population changes.

For concreteness let us assume that the prey in our model are rabbits, and that the predators are foxes. If we let $R(t)$ and $F(t)$ represent the number of rabbits and foxes, respectively, that are alive at time t, then the Lotka-Volterra model is:

\begin{align}
\dot R &= a\cdot R - b\cdot R\cdot F\\
\dot F &= e\cdot b\cdot R\cdot F - c\cdot F
\end{align}

where the parameters are defined by:
\begin{description}
\item[a] is the natural growth rate of rabbits in the absence of predation,
\item[c] is the natural death rate of foxes in the absence of food (rabbits),
\item[b] is the death rate per encounter of rabbits due to predation,
\item[e] is the efficiency of turning predated rabbits into foxes. 
\end{description}

The Stella model representing the Lotka-Volterra model will be slightly more complex than the single species models we've dealt with before. The main difference is that our model will have two stocks (reservoirs), one for each species. Each species will have its own birth and death rates. In addition, the Lotka-Volterra model involves four parameters rather than two. All told, the Stella representation of the Lotka-Volterra model will use two stocks, four flows, four converters and many connectors.

\bgroup
\def\InitCond{ 0 10 10}%% xa ya xl
\def\Faiglelapin{\Vaigle*(y[2]-y[0])/sqrt(y[1]^2+(y[2]-y[0])^2)|%
                 -\Vaigle*y[1]/sqrt(y[1]^2+(y[2]-y[0])^2)|%
                 -\Vlapin}
\def\Vlapin{1}  \def\Vaigle{1.6}  
\psset{unit=.7,subgriddiv=0,gridcolor=lightgray,method=adams,algebraic,%
   plotpoints=20,showpoints=true}
\begin{pspicture}(-3,-8.25)(8,10)\psgrid[griddots=10]
 \psplotDiffEqn[plotfuncy=pop 0,whichabs=2,linecolor=red]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[whichabs=0,whichord=1,linecolor=black,method=rk4]{0}{10}{\InitCond}{\Faiglelapin}
  \psplotDiffEqn[whichabs=0,whichord=1,linecolor=blue]{0}{10}{\InitCond}{\Faiglelapin}
\end{pspicture}\hfill
\begin{pspicture}(0,-0.25)(10,14)\psgrid
 \psplotDiffEqn[plotfuncy=dup 1 get dup mul exch dup 0 get exch 2 get sub dup
    mul add sqrt,linecolor=red,method=rk4]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[plotfuncy=dup 1 get dup mul exch dup 0 get exch 2 get sub dup
    mul add sqrt,linecolor=blue]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[plotfuncy=pop Func aload pop pop dup mul exch dup mul add sqrt,
    linecolor=yellow]{0}{10}{\InitCond}{\Faiglelapin}
\end{pspicture}
\egroup
\begin{lstlisting}[label={fig:aiglelapin}]
\def\InitCond{ 0 10 10}%% xa ya xl
\def\Faiglelapin{\Vaigle*(y[2]-y[0])/sqrt(y[1]^2+(y[2]-y[0])^2)|%
                 -\Vaigle*y[1]/sqrt(y[1]^2+(y[2]-y[0])^2)|%
                 -\Vlapin}
\def\Vlapin{1}  \def\Vaigle{1.6}  
\psset{unit=.7,subgriddiv=0,gridcolor=lightgray,method=adams,algebraic,%
   plotpoints=20,showpoints=true}
\begin{pspicture}(-3,-8)(5,10)\psgrid[griddots=10]
 \psplotDiffEqn[plotfuncy=pop 0,whichabs=2,linecolor=red]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[whichabs=0,whichord=1,linecolor=black,method=rk4]{0}{10}{\InitCond}{\Faiglelapin}
  \psplotDiffEqn[whichabs=0,whichord=1,linecolor=blue]{0}{10}{\InitCond}{\Faiglelapin}
\end{pspicture}\hfill
\begin{pspicture}(10,12)\psgrid
 \psplotDiffEqn[plotfuncy=dup 1 get dup mul exch dup 0 get exch 2 get sub dup
    mul add sqrt,linecolor=red,method=rk4]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[plotfuncy=dup 1 get dup mul exch dup 0 get exch 2 get sub dup
    mul add sqrt,linecolor=blue]{0}{10}{\InitCond}{\Faiglelapin}
 \psplotDiffEqn[plotfuncy=pop Func aload pop pop dup mul exch dup mul add sqrt,
    linecolor=yellow]{0}{10}{\InitCond}{\Faiglelapin}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{$y''=y$}
%--------------------------------------------------------------------------------------

Beginning with the initial equation $\displaystyle y(x)=Ae^x+Be^{-x}$ we get the hyperbolic
trigonometrical functions.

\begin{center}
\bgroup
\def\Funct{exch}   \psset{xunit=5cm, yunit=0.75cm}
\begin{pspicture}(0,-0.25)(2,7)\psgrid[subgriddiv=1,griddots=10]
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler x exp}  %%e^x
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{1 1}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{1 1}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{1 1}{\Funct}
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler dup x exp  %%ch(x)
    exch x neg exp add 2 div}
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{1 0}{\Funct}
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler dup x exp    
     exch x neg exp sub 2 div}  %%sh(x)
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{0 1}{\Funct}
 \rput*(1.3,.9){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](1.3,.9){\small\textsc{Euler} ordre 1 $h=1$}
 \rput*(1.3,.8){\psline[linecolor=blue](-.75cm,0)}\rput*[l](1.3,.8){\small\textsc{Euler} ordre 1 $h=0{,}1$}
 \rput*(1.3,.7){\psline[linecolor=red](-.75cm,0)}\rput*[l](1.3,.7){\small RK ordre 4 $h=1$}
 \rput*(1.3,.6){\psline[linecolor=green](-.75cm,0)}\rput*[l](1.3,.6){\small solution exacte}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}[label={fig:minusexp}]
\def\Funct{exch}   \psset{xunit=5cm, yunit=0.75cm}
\begin{pspicture}(0,-0.25)(2,7)\psgrid[subgriddiv=1,griddots=10]
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler x exp}  %%e^x
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{1 1}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{1 1}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{1 1}{\Funct}
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler dup x exp  %%ch(x)
    exch x neg exp add 2 div}
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{1 0}{\Funct}
 \psplot[linewidth=4\pslinewidth, linecolor=green]{0}{2}{Euler dup x exp    
     exch x neg exp sub 2 div}  %%sh(x)
 \psplotDiffEqn[linecolor=magenta, plotpoints=11]{0}{2}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=blue, plotpoints=101]{0}{2}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=11]{0}{2}{0 1}{\Funct}
 \rput*(1.3,.9){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](1.3,.9){\small\textsc{Euler} ordre 1 $h=1$}
 \rput*(1.3,.8){\psline[linecolor=blue](-.75cm,0)}\rput*[l](1.3,.8){\small\textsc{Euler} ordre 1 $h=0{,}1$}
 \rput*(1.3,.7){\psline[linecolor=red](-.75cm,0)}\rput*[l](1.3,.7){\small RK ordre 4 $h=1$}
 \rput*(1.3,.6){\psline[linecolor=green](-.75cm,0)}\rput*[l](1.3,.6){\small solution exacte}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{$y''=-y$}
%--------------------------------------------------------------------------------------
\begin{center}
\bgroup
\def\Funct{exch neg}
\psset{xunit=1, yunit=4}
\def\quatrepi{12.5663706144}%%4pi=12.5663706144
\begin{pspicture}(0,-1.25)(\quatrepi,1.25)\psgrid[subgriddiv=1,griddots=10]
 \psplot[linewidth=4\pslinewidth,linecolor=green]{0}{\quatrepi}{x RadtoDeg cos}%%cos(x)
 \psplotDiffEqn[linecolor=blue, plotpoints=201]{0}{3.1415926}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=31]{0}{\quatrepi}{1 0}{\Funct}
 \psplot[linewidth=4\pslinewidth,linecolor=green]{0}{\quatrepi}{x RadtoDeg sin}  %%sin(x)
 \psplotDiffEqn[linecolor=blue,plotpoints=201]{0}{3.1415926}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=red,method=rk4, plotpoints=31]{0}{\quatrepi}{0 1}{\Funct}
 \rput*(3.3,.9){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](3.3,.9){\small Euler order 1 $h=1$}
 \rput*(3.3,.8){\psline[linecolor=blue](-.75cm,0)}\rput*[l](3.3,.8){\small Euler order 1 $h=0{,}1$}
 \rput*(3.3,.7){\psline[linecolor=red](-.75cm,0)}\rput*[l](3.3,.7){\small RK ordre 4 $h=1$}
 \rput*(3.3,.6){\psline[linecolor=green](-.75cm,0)}\rput*[l](3.3,.6){\small solution exacte}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}[label={fig:minusexp2}]
\def\Funct{exch neg}
\psset{xunit=1, yunit=4}
\def\quatrepi{12.5663706144}%%4pi=12.5663706144
\begin{pspicture}(0,-1.25)(\quatrepi,1.25)\psgrid[subgriddiv=1,griddots=10]
 \psplot[linewidth=4\pslinewidth,linecolor=green]{0}{\quatrepi}{x RadtoDeg cos}%%cos(x)
 \psplotDiffEqn[linecolor=blue, plotpoints=201]{0}{3.1415926}{1 0}{\Funct}
 \psplotDiffEqn[linecolor=red, method=rk4, plotpoints=31]{0}{\quatrepi}{1 0}{\Funct}
 \psplot[linewidth=4\pslinewidth,linecolor=green]{0}{\quatrepi}{x RadtoDeg sin}  %%sin(x)
 \psplotDiffEqn[linecolor=blue,plotpoints=201]{0}{3.1415926}{0 1}{\Funct}
 \psplotDiffEqn[linecolor=red,method=rk4, plotpoints=31]{0}{\quatrepi}{0 1}{\Funct}
 \rput*(3.3,.9){\psline[linecolor=magenta](-.75cm,0)}\rput*[l](3.3,.9){\small Euler order 1 $h=1$}
 \rput*(3.3,.8){\psline[linecolor=blue](-.75cm,0)}\rput*[l](3.3,.8){\small Euler order 1 $h=0{,}1$}
 \rput*(3.3,.7){\psline[linecolor=red](-.75cm,0)}\rput*[l](3.3,.7){\small RK ordre 4 $h=1$}
 \rput*(3.3,.6){\psline[linecolor=green](-.75cm,0)}\rput*[l](3.3,.6){\small solution exacte}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{The mechanical pendulum: $y''=-\frac{g}{l}\sin(y)$}% $
%--------------------------------------------------------------------------------------

Pour des faibles oscillations $\sin(y)\simeq y$:

\[ y(x)=y_0\cos\left(\sqrt{\frac{g}{l}}x\right) \]

The function $f$ is writen in PostScript code:

\begin{verbatim}
exch RadtoDeg sin -9.8 mul %% y' -gsin(y)
\end{verbatim}

\begin{center}
\bgroup
\def\Func{y[1]|-9.8*sin(y[0])}
\psset{yunit=2,xunit=4,algebraic=true,linewidth=1.5pt}
\begin{pspicture}(0,-2.25)(3,2.25)\psgrid[subgriddiv=2,griddots=10]
  \psplot[linewidth=3\pslinewidth, linecolor=Orange]{0}{3}{.1*cos(sqrt(9.8)*x)}
  \psset{method=rk4,plotpoints=50,linecolor=blue}
  \psplotDiffEqn{0}{3}{.1 0}{\Func}
  \psplot[linewidth=3\pslinewidth,linecolor=Orange]{0}{3}{.25*cos(sqrt(9.8)*x)}
  \psplotDiffEqn{0}{3}{.25 0}{\Func}
  \psplotDiffEqn{0}{3}{.5 0}{\Func}
  \psplotDiffEqn{0}{3}{1 0}{\Func}
  \psplotDiffEqn[plotpoints=100]{0}{3}{Pi 2 div 0}{\Func}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}[label=fig:second]
\def\Func{y[1]|-9.8*sin(y[0])}
\psset{yunit=2,xunit=4,algebraic=true,linewidth=1.5pt}
\begin{pspicture}(0,-2.25)(3,2.25)\psgrid[subgriddiv=2,griddots=10]
  \psplot[linewidth=3\pslinewidth, linecolor=Orange]{0}{3}{.1*cos(sqrt(9.8)*x)}
  \psset{method=rk4,plotpoints=50,linecolor=blue}
  \psplotDiffEqn{0}{3}{.1 0}{\Func}
  \psplot[linewidth=3\pslinewidth,linecolor=Orange]{0}{3}{.25*cos(sqrt(9.8)*x)}
  \psplotDiffEqn{0}{3}{.25 0}{\Func}
  \psplotDiffEqn{0}{3}{.5 0}{\Func}
  \psplotDiffEqn{0}{3}{1 0}{\Func}
  \psplotDiffEqn[plotpoints=100]{0}{3}{Pi 2 div 0}{\Func}
\end{pspicture}
\end{lstlisting}

%--------------------------------------------------------------------------------------
\subsubsection{$y''=-\frac{y'}{4}-2y$}% $
%--------------------------------------------------------------------------------------

Pour $y_0=5$ et $y'_0=0$ la solution est :

\[ 
5e^{-\frac{x}{8}}\left(\cos\left(\omega x\right)+\frac{\sin(\omega x)}{8\omega}\right)
\mbox{ avec } \omega=\frac{\sqrt{127}}{8}
\]

\iffalse
La fonction $f$ est dï¿½rite par le code PostScript suivant :

\begin{verbatim}
dup             %% y y' y'
3 1 roll        %% y' y y'
-4 div          %% y' y y'/-4
exch            %% y' y'/-4 y
2 mul           %% y' y'/-4 2y
sub             %% y' y'/-4-2y
\end{verbatim}

\fi
\begin{center}
\bgroup
\psset{xunit=.6,yunit=0.8,plotpoints=500}
\begin{pspicture}(0,-4.25)(26,5.25)
  \psgrid[subgriddiv=0,gridcolor=lightgray,linewidth=1.5pt]
  \psplot[plotpoints=200,linewidth=4\pslinewidth,linecolor=gray]{0}{26}{%
     Euler x -8 div exp x 127 sqrt 8 div mul RadtoDeg dup cos 5 mul exch sin 127 sqrt div 5 mul add mul}
  \psplotDiffEqn[linecolor=red,linewidth=5\pslinewidth]{0}{26}{5 0}
     {dup 3 1 roll -4 div exch 2 mul sub}
  \psplotDiffEqn[linecolor=black,algebraic]{0}{26}{5 0} {y[1]|-y[1]/4-2*y[0]}
  \psset{method=rk4, plotpoints=50}
  \psplotDiffEqn[linecolor=blue,linewidth=5\pslinewidth]{0}{26}{5 0}{%
      dup 3 1 roll -4 div exch 2 mul sub}
  \psplotDiffEqn[linecolor=black,algebraic=true]{0}{26}{5 0}{y[1]|-y[1]/4-2*y[0]}
\end{pspicture}
\egroup
\end{center}

\begin{lstlisting}
\psset{xunit=.6,yunit=0.8,plotpoints=500}
\begin{pspicture}(0,-4.25)(26,5.25)
  \psgrid[subgriddiv=0,gridcolor=lightgray,linewidth=1.5pt]
  \psplot[plotpoints=200,linewidth=4\pslinewidth,linecolor=gray]{0}{26}{%
     Euler x -8 div exp x 127 sqrt 8 div mul RadtoDeg dup cos 5 mul exch sin 127 sqrt div 5 mul add mul}
  \psplotDiffEqn[linecolor=red,linewidth=5\pslinewidth]{0}{26}{5 0}
     {dup 3 1 roll -4 div exch 2 mul sub}
  \psplotDiffEqn[linecolor=black,algebraic]{0}{26}{5 0} {y[1]|-y[1]/4-2*y[0]}
  \psset{method=rk4, plotpoints=50}
  \psplotDiffEqn[linecolor=blue,linewidth=5\pslinewidth]{0}{26}{5 0}{%
      dup 3 1 roll -4 div exch 2 mul sub}
  \psplotDiffEqn[linecolor=black,algebraic=true]{0}{26}{5 0}{y[1]|-y[1]/4-2*y[0]}
\end{pspicture}
\end{lstlisting}

\iffalse

\newpage
%--------------------------------------------------------------------------------------
\subsubsection{Gravitation: two stars and more}
%--------------------------------------------------------------------------------------

\iffalse 
L'exemple le plus complexe dans l'ï¿½riture de $f$, mais aussi dans l'ï¿½uilibrage de
la simulation\footnote{n'hï¿½itez pas ï¿½modifier des paramï¿½res, ajouter des astres,
  et vous verrez que le systï¿½e solaire est miraculeux : il est stable !}. $f$ est
gï¿½ï¿½ique : elle peut traiter un nombre d'astres quelconques chacun ayant sa propre
masse. Dans cette section on va en faire interagir quatre. Cela donne pour le moteur
d'affichage un systï¿½e de 16 ï¿½uations du premier ordre ï¿½rï¿½oudre, et le rï¿½ultat
est remarquable.

\fi
                x1 y1 x'1 y'1 x2 y2 x'2 y'2 x3 y3 x'3    y'3  x4   y4  x'4  y'4
  \def\InitCond{ 1  1   0   0 -1 -1  -2   2  3  3 2.86 -2.86 5.5 -3.5 -2.1 -2.1}
  \def\tMAX{10}
  \newcommand{\MunMdeux}{40}
  \newcommand{\MdeuxMtrois}{40}
  \psset{unit=1, showpoints=false, plotpoints=400}%%plotpoints=375}
  \newcommand{\Test}{
    %% masses des astres
    /Weigth [ 40 1 1 2 ] def
    /NbAstor Weigth length def
    /ABVect { 3 -1 roll exch sub 3 1 roll sub exch } def
    %% calculs des distances entre masses
    1 1 NbAstor 1 sub {
      dup /i exch def 1 add 1 NbAstor {
        /j exch def
        y i 1 sub 4 mul get y j 1 sub 4 mul get sub dup mul
        y i 1 sub 4 mul 1 add get y j 1 sub 4 mul 1 add get sub dup mul add
        } for
      } for
    NbAstor dup 1 sub mul 2 div cvi array astore /ro2 exch def
    %% calculs des forces
    1 1 NbAstor {
      /i exch def
      y i 1 sub 4 mul 4 getinterval aload pop 4 2 roll
      /xf 0 def /yf 0 def
      1 1 NbAstor {
        dup i eq
        { pop }
        { /j exch def
        2 copy y j 1 sub 4 mul 2 getinterval aload pop ABVect
        Weigth j 1 sub get
        ro2 i j 2 copy lt { exch } if dup
        dup 1 sub dup NbAstor mul 3 1 roll mul 2 div sub 3 1 roll sub add 1 sub
        cvi get dup sqrt mul div exch 1 index mul 3 1 roll mul exch
        yf add /yf exch def xf add /xf exch def } ifelse
        } for pop pop xf neg yf neg 
      } for
      NbAstor 4 mul array astore
    }

\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(-9,-6.25)(6,6)
 \psgrid[subgriddiv=0,gridcolor=lightgray](-9,-6)(6,6)
 \psset{buildvector=true,method=rk4,linewidth=1.5pt}
 \psplotDiffEqn[whichabs=0,whichord=1,linecolor=blue]{0}{\tMAX}{\InitCond}{\Test}
 \psplotDiffEqn[whichabs=4,whichord=5,linecolor=red]{0}{\tMAX}{\InitCond}{\Test}
 \psplotDiffEqn[whichabs=4,whichord=5,linecolor=Orange,method=adams]{0}{\tMAX}{\InitCond}{\Test}
 \psplotDiffEqn[whichabs=8,whichord=9,linecolor=magenta]{0}{\tMAX}{\InitCond}{\Test}
 \psplotDiffEqn[whichabs=12,whichord=13,linecolor=green]{0}{\tMAX}{\InitCond}{\Test}
 \psplotDiffEqn[whichabs=12,whichord=13,linecolor=yellow,method=adams]{0}{\tMAX}{\InitCond}{\Test}
\end{pspicture}
\end{LTXexample}


\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(-10,-7.25)(5,5)
  \psgrid[subgriddiv=0,gridcolor=lightgray](-10,-7)(5,5)
  \psset{buildvector=true,method=rk4,linewidth=1.5pt}
  \psplotDiffEqn[linecolor=red,plotfuncx=y dup 4 get exch 0 get sub ,
     plotfuncy=dup 5 get exch 1 get sub ]{0}{\tMAX}{\InitCond}{\Test}
  \psplotDiffEqn[linecolor=magenta,plotfuncx=y dup 8 get exch 0 get sub ,
     plotfuncy=dup 9 get exch 1 get sub ]{0}{\tMAX}{\InitCond}{\Test}
  \psplotDiffEqn[linecolor=green,plotfuncx=y dup 12 get exch 0 get sub ,
     plotfuncy=dup 13 get exch 1 get sub ]{0}{\tMAX}{\InitCond}{\Test}
\end{pspicture}
\end{LTXexample}

\fi


%--------------------------------------------------------------------------------------
\section{\CMD{psMatrixPlot}}
%--------------------------------------------------------------------------------------
\begin{filecontents}{matrix.dat}
/dotmatrix [ %
0  1  1  0  0  0  0  1	1  1
0  1  1	 0  1  1  1  0	1  0
1  0  1	 1  0  0  0  1	1  0
0  0  1	 0  0  0  0  0	1  1
1  1  1	 1  1  0  1  0	0  1
0  0  1	 1  0  1  0  1	1  1
1  0  0	 0  1  1  0  0	0  1
0  0  0	 1  1  1  0  1	1  0
1  1  0	 0  0  0  1  0	0  1
1  0  1	 0  0  1  1  1	0  0
] def 
\end{filecontents}


This macro allows to visualize a matrix. The datafile must be defined as a PostScript matrix
named \verb+/dotmatrix+:
\begin{verbatim}
/dotmatrix [ %  <------------ important line
0  1  1  0  0  0  0  1  1  1
0  1  1	 0  1  1  1  0  1  0
1  0  1	 1  0  0  0  1  1  0
0  0  1	 0  0  0  0  0  1  1
1  1  1	 1  1  0  1  0  0  1
0  0  1	 1  0  1  0  1  1  1
1  0  0	 0  1  1  0  0  0  1
0  0  0	 1  1  1  0  1  1  0
1  1  0	 0  0  0  1  0  0  1
1  0  1  0  0  1  1  1  0  0
] def        %  <------------ important line
\end{verbatim}

Important is only the value 0, in this case there happens nothing and for all other
cases a dot is printed. The syntax of the macro is:
\begin{verbatim}
  \psMatrixPlot[options]{rows}{columns}{data file}
\end{verbatim}

The matrix is scanned line by line from the the first one to the last. In general it
looks vice versa than the above listed matrix, the first row $0\,1\,1\,0\,0\,0\,0\,1\,1\,1$
is the first plotted line ($y=1$). With the option \verb+ChangeOrder=true+ it looks exactly like
the above view.

\bgroup
\begin{center}
%\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(-0.5,-0.75)(11,11)
  \psaxes{->}(11,11)
  \psMatrixPlot[dotsize=1.1cm,dotstyle=square*,linecolor=magenta]%
    {10}{10}{matrix.dat}
  \psMatrixPlot[dotsize=.5cm,dotstyle=o,ChangeOrder]{10}{10}{matrix.dat}
\end{pspicture}
%\end{LTXexample}

\begin{lstlisting}
\begin{pspicture}(-0.5,-0.75)(11,11)
  \psaxes{->}(11,11)
  \psMatrixPlot[dotsize=1.1cm,dotstyle=square*,linecolor=magenta]%
    {10}{10}{matrix.dat}
  \psMatrixPlot[dotsize=.5cm,dotstyle=o,ChangeOrder]{10}{10}{matrix.dat}
\end{pspicture}
\end{lstlisting}

\begin{LTXexample}[pos=t,preset=\centering]
\begin{pspicture}(-0.5,-0.75)(11,11)
  \psaxes{->}(11,11)
  \psMatrixPlot[dotscale=3,dotstyle=*,linecolor=blue]{10}{8}{matrix.dat}
\end{pspicture}
\end{LTXexample}
\end{center}
\egroup

%--------------------------------------------------------------------------------------
\section{\CMD{psforeach}}
%--------------------------------------------------------------------------------------

The macro \CMD{psforeach} allows a loop with an individuell increment.

\begin{verbatim}
\psforeach{variable}{value list}{action}
\end{verbatim}

\begin{LTXexample}
\begin{pspicture}[showgrid=true](5,5)
  \psforeach{\nA}{0, 1, 1.5, 3, 5}{%
    \psdot[dotscale=3](\nA,\nA)}
\end{pspicture}
\end{LTXexample}


%--------------------------------------------------------------------------------------
\section{\CMD{resetOptions}}
%--------------------------------------------------------------------------------------

Sometimes it is difficult to know what options, which are changed inside a long document,
are different to the default one. With this
macro all options depending to \verb+pst-plot+ can be reset. This depends to all
options of the packages \verb+pstricks+, \verb+pst-plot+ and \verb+pst-node+.


\appendix


%--------------------------------------------------------------------------------------
\section{PostScript}
%--------------------------------------------------------------------------------------

PostScript uses the stack system and the LIFO system, "'Last In, First Out"`.

\newlength{\Li}\settowidth{\Li}{Function}
\begin{table}[htbp]
  \begin{center}{\ttfamily
    \begin{tabular}{|l|r@{ $\rightarrow$ }l|}\hline
    \multirow{2}{\Li}{\normalfont Function}&\multicolumn{2}{c|}{\normalfont Meaning}\\
    &\normalfont on stack before & \normalfont after\\\hline\hline
    add&$x\quad y$&$x+y$\\\hline
    sub&$x\quad y$&$x-y$\\\hline
    mul&$x\quad y$&$x\times y$\\\hline
    div&$x\quad y$&$x\div y$\\\hline
    sqrt&$x$&$\sqrt{x}$\\\hline
    abs&$x$&$|x|$\\\hline
    neg&$x$&$-x$\\\hline
    cos&$x$&$\cos(x)$ ($x$ in degrees)\\\hline
    sin&$x$&$\sin(x)$ ($x$  in degrees)\\\hline
    tan&$x$&$\tan(x)$ ($x$  in degrees)\\\hline
    atan&$y\quad x$&$\angle{(\vec{Ox};\vec{OM})}$ (in degrees of $M(x,y)$)\\\hline
    ln&$x$&$\ln(x)$\\\hline
    log&$x$&$\log(x)$\\\hline
    array&$n$&\normalfont$v$ (of dimension $n$)\\\hline
    aload&$v$&$x_1\quad x_2\quad \cdots\quad x_n\quad v$\\\hline
    astore&$x_1\quad x_2\quad \cdots\quad x_n\quad v$&$v$\\\hline
    pop&$x$&\\\hline
    dup&$x\quad x$&\\\hline
    roll&$x_1\quad x_2\quad \cdots\quad x_n\quad n p$&\\\hline
  \end{tabular}}
    \caption{Some primitive PostScript macros}\label{tab:primpost}
  \end{center}
\end{table}


%--------------------------------------------------------------------------------------
\section{Credits}
%--------------------------------------------------------------------------------------
{Hendri Adriaens | } 
{Martin Chicoine | }
{Ulrich Dirr | } 
{Hubert G\"a\ss lein |}
{Denis Girou | } 
{Peter Hutnick | } 
{Christophe Jorssen | } 
{Uwe Kern | } 
{Manuel Luque | } 
{Jens-Uwe Morawski |}
{Tobias N\"ahring |}
{Rolf Niepraschk |}
{Alan Ristow |}
{Arnaud Schmittbuhl |}
{Timothy Van Zandt}



\nocite{*}
\bgroup
\raggedright
\bibliographystyle{plain}
\bibliography{pstricks-add-doc}
\egroup

%--------------------------------------------------------------------------------------
\section{Change log}
%--------------------------------------------------------------------------------------

See file Changes

%\clearpage
%\section{The code}

%\lstinputlisting{pstricks-add.tex}


\end{document}
