% pdflatex -interaction nonstopmode pst-marble-commands-v1.4.tex \documentclass{article} \usepackage[margin=1cm]{geometry} \usepackage{xcolor} \usepackage{hyperref} %\documentclass[ % 11pt, % english, % BCOR10mm, % DIV12, % bibliography=totoc, % parskip=false, % fleqn, % smallheadings, % headexclude, % footexclude, % oneside, % dvipsnames, % svgnames, % x11names, %]{pst-doc} \pagestyle{empty} \newcommand\mycmd[2]{ \smallskip \qquad {#1} \texttt{#2} } \newcommand\myparam[2]{ \smallskip \qquad \texttt{#1=} \texttt{#2} } \newcommand\myparamb[2]{ \smallskip \qquad \texttt{#1=} \texttt{{\char`\{}#2{\char`\}}} } \definecolor{Mycolor2}{HTML}{008000} \newcommand\rgb{\textit{\textcolor{red}{r}\textcolor{Mycolor2}{g}\textcolor{blue}{b}} } \newcommand\rgbs{\texttt{[}\rgb~...\texttt{]} } \newcommand\Rs{\texttt{[}$R$~...\texttt{]} } %% \parskip5pt \parindent0pt \begin{document} \url{http://people.csail.mit.edu/jaffer/Marbling/pst-marble-commands-v1.4.pdf} \section*{PST-marble Commands and Parameters} \subsection*{Colors} RGB colors can be specified in three formats: \mycmd{\texttt{[ 0.906 0.8 0.608 ]}}{} Red, green, and blue color components between 0 and 1 in square brackets. \mycmd{\texttt{[ 231 204 155 ]}}{} Red, green, and blue color components between 0 and 255 in square brackets. \mycmd{\texttt{(e7cc9b)}}{} Red, green, and blue (\textcolor{red}{Rr}\textcolor{Mycolor2}{Gg}\textcolor{blue}{Bb}) hexadecimal color components between \texttt{00} and \texttt{FF} (or \texttt{ff}) in parentheses. In the command arguments \rgbs indicates a bracketed sequence of colors. For example: \mycmd{\texttt{[(c28847) [231 204 155] [0.635 0.008 0.094]]}}{} \subsection*{Parameters} \texttt{{\char`\\}psMarble[} \textit{parameter-assignment}\texttt{,} \dots{}\texttt{,} \textit{parameter-assignment} \texttt{](}\textit{width}\texttt{,}\textit{height}\texttt{)} \texttt{{\char`\\}psMarble[} \textit{parameter-assignment}\texttt{,} \dots{}\texttt{,} \textit{parameter-assignment} \texttt{]($x-$,$y-$)($x+$,$y+$)} \medskip The comma separated parameter assignments are part of the \texttt{{\char`\\}psMarble} command. In the list below, the default value for each parameter is shown to the right of the parameter name. Note that the values assigned to \texttt{background=}, \texttt{colors=}, \texttt{seed=}, \texttt{actions=}, and \texttt{spractions=} must be enclosed in curly braces \texttt{{\char`\{}{\char`\}}}. \myparamb{background}{[0~0~0]} Specifies the color for regions where paint has not been dropped (or moved to). \myparam{bckg}{true} When \texttt{bckg=false} the background color is not shown. \myparamb{colors}{ [0.275~0.569~0.796] [0.965~0.882~0.302] [0.176~0.353~0.129] [0.635~0.008~0.094] [0.078~0.165~0.518] [0.824~0.592~0.031] [0.059~0.522~0.392] [0.816~0.333~0.475] [0.365~0.153~0.435] [0.624~0.588~0.439] } Specifies a color sequence accessible in paint-dropping commands as \texttt{colors}. \myparam{drawcontours}{false} When \texttt{drawcontours=true} paint contours are drawn with lines; when \texttt{drawcontours=false} contours are filled; \myparam{oversample}{0} When \texttt{oversample=0} a resolution-independent image is produced using contour-rendering. When the number of drops gets too large ($>150$) triangular artifacts start to appear. Changing to \texttt{oversample=1} employs raster-rendering to more quickly compute each image pixel individually. When \texttt{oversample=2} the rendering takes four times as long, but each pixel is the averaged over its four quarters, producing an image nearly as good as \texttt{oversample=0}. When \texttt{oversample} is between 0 and 1, the rendering is on a coarser grid than \texttt{oversample=1}, speeding image production. \myparam{overscan}{1} When the \texttt{overscan} value is greater than 1, proportionally more image (outside of the specified area) is shown, and the specified area is outlined with a dashed rectangular border. This is a utility for developing marblings, new for version 1.4. \myparamb{seed}{Mathematical Marbling} Specifies the random seed used for \texttt{Gaussian-drops} and \texttt{uniform-drops} commands. Changing the \texttt{seed} value changes the positions of all drops from the \texttt{Gaussian-drops} and \texttt{uniform-drops} commands. \myparam{viscosity}{1000} Specifies the overall kinetic viscosity of the virtual tank fluid. Its units are $\rm{mm^2/s}$; the default value of 1000, which is 1000 times more viscous than water, is a typical value for marbling. Increasing \texttt{viscosity} reduces the fluid movement far from the tines. \myparamb{actions}{0 0 36 colors 35 concentric-rings} Specifies the sequence of marbling commands to perform. The default is a single command dropping 35 colors in the \texttt{colors} sequence. The available commands are listed below. \myparamb{spractions}{} Specifies the sequence of spray commands to perform. Spray commands are performed after marbling. \newpage \subsection*{Dropping Paint} \mycmd{$x$ $y$ $R_d$ \rgb}{drop} Places a drop of color \rgb and radius $R_d$ centered at location $x,y$. \mycmd{$x$ $y$ $R_i$ \rgbs $n$}{concentric-rings} Places $n$ rings in color sequence \rgbs centered at location $x,y$, each ring having thickness $R_i$. \mycmd{$x$ $y$ $\theta$ \Rs \rgbs $R_d$}{line-drops} Places drops of colors \rgbs (in sequence) of radius $R_d$ in a line through $x,y$ at $\theta$ degrees clockwise from vertical at distances \Rs from $x,y$. \mycmd{$x$ $y$ {\texttt{[}$\Omega_x$~...\texttt{]} } {\texttt{[}$\Omega_y$~...\texttt{]} } $\theta$ \rgbs $R_d$}{serpentine-drops} Places drops of colors \rgbs of radius $R_d$ in a serpentine pattern (starting lower left to right; right to left; left to right...) at offsets $\Omega_x \times \Omega_y$ centered at location $x,y$ and rotated by $\theta$ degrees clockwise from vertical. Orders of $\Omega_x$ and $\Omega_y$ matter. \mycmd{$x$ $y$ $R$ $\theta$ $S$ $\delta$ \rgbs $n$ $R_d$}{coil-drops} Places $n$ drops of colors \rgbs (in sequence) of radius $R_d$ in an arc or spiral centered at $x,y$ starting at radius $R$ and $\theta$ degrees clockwise from vertical, moving $S$ along the arc and incrementing the arc radius by $\delta$ after each drop. \mycmd{$x$ $y$ $R$ $\theta$ $\epsilon$ \rgbs $n$ $R_d$}{Gaussian-drops} Places $n$ drops of colors \rgbs of radius $R_d$ randomly in a circular or elliptical disk centered at $x,y$ having mean radius $R$, $\theta$ degrees clockwise from vertical, and length-to-width ratio $\epsilon$. For a circular disk, 63\,\% of drops are within radius $R$, 87\,\% of drops are within $R\,\sqrt{2}$, and 98\,\% of drops are within radius $2\,R$. \mycmd{$x$ $y$ $L_x$ $L_y$ $\theta$ \rgbs $n$ $R_d$}{uniform-drops} Places $n$ drops of colors \rgbs of radius $R_d$ randomly in a $L_x$ by $L_y$ rectangle centered at location $x,y$ and rotated by $\theta$ degrees clockwise from vertical. \subsection*{Deformations} \mycmd{$\theta$ \Rs $V$ $S$ $D$}{rake} Pulls tines of diameter $D$ at $\theta$ degrees from the y-axis through the virtual tank at velocity $V$, moving fluid on the tine path a distance $S$. The tine paths are spaced \Rs from the tank center at their nearest points. \mycmd{$x_b$ $y_b$ $x_e$ $y_e$ $V$ $D$}{stylus} Pulls a single tine of diameter $D$ from $x_b,y_b$ to $x_e,y_e$ at velocity $V$. Legacy \texttt{stroke} also works. \mycmd{$x$ $y$ \Rs $\omega$ $\theta$ $D$}{stir} Pulls tines of diameter $D$ in circular tracks of radii \Rs (negative $R$ is counterclockwise) around location $x,y$ at angular velocity $\omega$. The maximum angle through which fluid is moved is $\theta$ degrees. \mycmd{$x$ $y$ $\Gamma$ $t$}{vortex} Rotates fluid clockwise around location $x,y$ as would result from an impulse of circulation $\Gamma$ after time $t$. At small $t$ the rotational shear is concentrated close to the center. As time passes the shear propagates outward. \mycmd{$\theta$ $\lambda$ $\Omega$ $S$}{wiggle} Applies sinsusoidal wiggle with period $\lambda$ and maximum displacement $S$ to whole tank. With $\theta=0$, a point at $x,y$ is moved to $x+S\,\sin(360\,y/\lambda+\Omega),y$. \mycmd{$\theta$ $R$}{shift} Shifts tank by $R$ at $\theta$ degrees clockwise from vertical. \mycmd{\texttt{[} $n$ $S$ $\Omega$}{tines} \texttt{]} The tines command and its arguments are replaced by a sequence of $n$ numbers. The difference between adjacent numbers is $S$ and the center number is $\Omega$ when $n$ is odd and $S/2-\Omega$ when $n$ is even. \subsection*{Spray Actions} Spray actions are intended for drops small enough that they don't noticeably move paint boundaries. The radii of spray droplets are the cube roots of log-normal distributed values with mean $R_d$. \mycmd{$x$ $y$ $R$ $\theta$ $\epsilon$ \rgbs $n$ $R_d$}{Gaussian-spray} Places $n$ drops of colors \rgbs randomly in a circular or elliptical disk centered at $x,y$ having mean radius $R$, $\theta$ degrees clockwise from vertical, and length-to-width ratio $\epsilon$. For a circular disk, 63\,\% of drops are within radius $R$, 87\,\% of drops are within $R\,\sqrt{2}$, and 98\,\% of drops are within radius $2\,R$. \mycmd{$x$ $y$ $L_x$ $L_y$ $\theta$ \rgbs $n$ $R_d$}{uniform-spray} Places $n$ drops of colors \rgbs randomly in a $L_x$ by $L_y$ rectangle centered at location $x,y$ and rotated by $\theta$ degrees clockwise from vertical. \end{document}