/* Copyright 2009-2010 Taco Hoekwater This file is part of LuaTeX. LuaTeX is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. LuaTeX is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU General Public License along with LuaTeX; if not, see . */ #include "ptexlib.h" void fin_align(void); void init_row(void); void init_col(void); #define noDEBUG /*tex It's sort of a miracle whenever \.{\\halign} and \.{\\valign} work, because they cut across so many of the control structures of \TeX. Therefore the present page is probably not the best place for a beginner to start reading this program; it is better to master everything else first. Let us focus our thoughts on an example of what the input might be, in order to get some idea about how the alignment miracle happens. The example doesn't do anything useful, but it is sufficiently general to indicate all of the special cases that must be dealt with; please do not be disturbed by its apparent complexity and meaninglessness. \starttyping \tabskip 2pt plus 3pt \halign to 300pt{u1#v1& \hskip 50pt \tabskip 1pt plus 1fil u2#v2& \hskip 50pt u3#v3\cr \hskip 25pt a1&\omit a2&\vrule\cr \hskip 25pt \noalign\{\vskip 3pt} \hskip 25pt b1\span b2\cr \hskip 25pt \omit&c2\span\omit\cr} \stoptyping Here's what happens: \startitemize \startitem When `\.{\\halign to 300pt\{}' is scanned, the |scan_spec| routine places the 300pt dimension onto the |save_stack|, and an |align_group| code is placed above it. This will make it possible to complete the alignment when the matching `\.\}' is found. \stopitem \startitem The preamble is scanned next. Macros in the preamble are not expanded, except as part of a tabskip specification. For example, if \.{u2} had been a macro in the preamble above, it would have been expanded, since \TeX\ must look for `\.{minus...}' as part of the tabskip glue. A ``preamble list'' is constructed based on the user's preamble; in our case it contains the following seven items: \starttabulate \NC \type{\glue 2pt plus 3pt} \NC the tabskip preceding column 1 \NC \NR \NC \type{\alignrecord} of width $-\infty$ \NC preamble info for column 1 \NC \NR \NC \type{\glue 2pt plus 3pt} \NC the tabskip between columns 1 and 2 \NC \NR \NC \type{\alignrecord} of width $-\infty$ \NC preamble info for column 2 \NC \NR \NC \type{\glue 1pt plus 1fil} \NC the tabskip between columns 2 and 3 \NC \NR \NC \type{\alignrecord} of width $-\infty$ \NC preamble info for column 3 \NC \NR \NC \type{\glue 1pt plus 1fil} \NC the tabskip following column 3 \NC \NR \stoptabulate These ``alignrecord'' entries have the same size as an |unset_node|, since they will later be converted into such nodes. These alignrecord nodes have no |depth| field; this is split into |u_part| and |v_part|, and they point to token lists for the templates of the alignment. For example, the |u_part| field in the first alignrecord points to the token list `\.{u1}', i.e., the template preceding the `\.\#' for column~1. Furthermore, They have a |span_ptr| instead of a |node_attr| field, and these |span_ptr| fields are initially set to the value |end_span|, for reasons explained below. \stopitem \startitem \TeX\ now looks at what follows the \.{\\cr} that ended the preamble. It is not `\.{\\noalign}' or `\.{\\omit}', so this input is put back to be read again, and the template `\.{u1}' is fed to the scanner. Just before reading `\.{u1}', \TeX\ goes into restricted horizontal mode. Just after reading `\.{u1}', \TeX\ will see `\.{a1}', and then (when the {\.\&} is sensed) \TeX\ will see `\.{v1}'. Then \TeX\ scans an |endv| token, indicating the end of a column. At this point an |unset_node| is created, containing the contents of the current hlist (i.e., `\.{u1a1v1}'). The natural width of this unset node replaces the |width| field of the alignrecord for column~1; in general, the alignrecords will record the maximum natural width that has occurred so far in a given column. \stopitem \startitem Since `\.{\\omit}' follows the `\.\&', the templates for column~2 are now bypassed. Again \TeX\ goes into restricted horizontal mode and makes an |unset_node| from the resulting hlist; but this time the hlist contains simply `\.{a2}'. The natural width of the new unset box is remembered in the |width| field of the alignrecord for column~2. \stopitem \startitem A third |unset_node| is created for column 3, using essentially the mechanism that worked for column~1; this unset box contains `\.{u3\\vrule v3}'. The vertical rule in this case has running dimensions that will later extend to the height and depth of the whole first row, since each |unset_node| in a row will eventually inherit the height and depth of its enclosing box. \stopitem \startitem The first row has now ended; it is made into a single unset box comprising the following seven items: \starttyping \glue 2pt plus 3pt \unsetbox for 1 column: u1a1v1 \glue 2pt plus 3pt \unsetbox for 1 column: a2 \glue 1pt plus 1fil \unsetbox for 1 column: u3\vrule v3 \glue 1pt plus 1fil \stoptyping The width of this unset row is unimportant, but it has the correct height and depth, so the correct baselineskip glue will be computed as the row is inserted into a vertical list. \stopitem \startitem Since `\.{\\noalign}' follows the current \.{\\cr}, \TeX\ appends additional material (in this case \.{\\vskip 3pt}) to the vertical list. While processing this material, \TeX\ will be in internal vertical mode, and |no_align_group| will be on |save_stack|. \stopitem \startitem The next row produces an unset box that looks like this: \starttyping \glue 2pt plus 3pt \unsetbox for 2 columns: u1b1v1u2b2v2 \glue 1pt plus 1fil \unsetbox for 1 column: {(empty)} \glue 1pt plus 1fil \stoptyping The natural width of the unset box that spans columns 1~and~2 is stored in a ``span node,'' which we will explain later; the |span_ptr| field of the alignrecord for column~1 now points to the new span node, and the |span_ptr| of the span node points to |end_span|. \stopitem \startitem The final row produces the unset box \starttyping \glue 2pt plus 3pt\cr \unsetbox for 1 column: {(empty)} \glue 2pt plus 3pt\cr \unsetbox for 2 columns: u2c2v2 \glue 1pt plus 1fil \stoptyping A new span node is attached to the alignrecord for column 2. \stopitem \startitem The last step is to compute the true column widths and to change all the unset boxes to hboxes, appending the whole works to the vertical list that encloses the \.{\\halign}. The rules for deciding on the final widths of each unset column box will be explained below. \stopitem \stopitemize Note that as \.{\\halign} is being processed, we fearlessly give up control to the rest of \TeX. At critical junctures, an alignment routine is called upon to step in and do some little action, but most of the time these routines just lurk in the background. It's something like post-hypnotic suggestion. We have mentioned that alignrecords contain no |height| or |depth| fields. Their |glue_sign| and |glue_order| are pre-empted as well, since it is necessary to store information about what to do when a template ends. This information is called the |extra_info| field. */ /*tex The pointer to \ token list: */ #define u_part(A) vlink((A)+depth_offset) /*tex The pointer to \ token list */ #define v_part(A) vinfo((A)+depth_offset) /*tex A column spanning list */ #define span_ptr(A) vinfo((A)+1) /*tex Info to remember during template */ #define extra_info(A) vinfo((A)+list_offset) /*tex Alignments can occur within alignments, so a small stack is used to access the alignrecord information. At each level we have a |preamble| pointer, indicating the beginning of the preamble list; a |cur_align| pointer, indicating the current position in the preamble list; a |cur_span| pointer, indicating the value of |cur_align| at the beginning of a sequence of spanned columns; a |cur_loop| pointer, indicating the tabskip glue before an alignrecord that should be copied next if the current list is extended; and the |align_state| variable, which indicates the nesting of braces so that \.{\\cr} and \.{\\span} and tab marks are properly intercepted. There also are pointers |cur_head| and |cur_tail| to the head and tail of a list of adjustments being moved out from horizontal mode to vertical~mode, and alike |cur_pre_head| and |cur_pre_tail| for pre-adjust lists. The current values of these nine quantities appear in global variables; when they have to be pushed down, they are stored in 6-word nodes, and |align_ptr| points to the topmost such node. */ /*tex This could be in |texnodes.h| but it's documented here. */ /*tex The current preamble list: */ #define preamble vlink(align_head) /*tex The current position in the preamble list: */ pointer cur_align = null; /*tex The start of the currently spanned columns in the preamble list: */ pointer cur_span = null; /*tex A place to copy when extending a periodic preamble: */ pointer cur_loop = null; /*tex The most recently pushed-down alignment stack node: */ pointer align_ptr = null; /*tex Adjustment list pointers: */ pointer cur_head = null, cur_tail = null; /*tex Pre-adjustment list pointers: */ pointer cur_pre_head = null, cur_pre_tail = null; /*tex The |align_state| and |preamble| variables are initialized elsewhere. Alignment stack maintenance is handled by a pair of trivial routines called |push_alignment| and |pop_alignment|. (HH:) It makes not much sense to add support for an \.{attr} keyword to \.{\\halign} and \.{\\valign} because then we need to decide if we tag rows or cells or both or come up with \.{cellattr} and \.{rowattr} and such. But then it even makes sense to have explicit commands (in addition to the seperator) to tags individual cells. Too muss hassle for now and the advantages are not that large. */ static void push_alignment(void) { /*tex The new alignment stack node: */ pointer p; p = new_node(align_stack_node, 0); vinfo(p + 1) = align_ptr; vlink(p + 1) = cur_align; vinfo(p + 2) = preamble; vlink(p + 2) = cur_span; vinfo(p + 3) = cur_loop; vlink(p + 3) = align_state; vinfo(p + 4) = cur_head; vlink(p + 4) = cur_tail; vinfo(p + 5) = cur_pre_head; vlink(p + 5) = cur_pre_tail; align_ptr = p; cur_head = new_node(temp_node, 0); cur_pre_head = new_node(temp_node, 0); } static void pop_alignment(void) { /*tex The top alignment stack node: */ pointer p; flush_node(cur_head); flush_node(cur_pre_head); p = align_ptr; cur_pre_tail = vlink(p + 5); cur_pre_head = vinfo(p + 5); cur_tail = vlink(p + 4); cur_head = vinfo(p + 4); align_state = vlink(p + 3); cur_loop = vinfo(p + 3); cur_span = vlink(p + 2); preamble = vinfo(p + 2); cur_align = vlink(p + 1); align_ptr = vinfo(p + 1); flush_node(p); } /*tex \TeX\ has eight procedures that govern alignments: |init_align| and |fin_align| are used at the very beginning and the very end; |init_row| and |fin_row| are used at the beginning and end of individual rows; |init_span| is used at the beginning of a sequence of spanned columns (possibly involving only one column); |init_col| and |fin_col| are used at the beginning and end of individual columns; and |align_peek| is used after \.{\\cr} to see whether the next item is \.{\\noalign}. We shall consider these routines in the order they are first used during the course of a complete \.{\\halign}, namely |init_align|, |align_peek|, |init_row|, |init_span|, |init_col|, |fin_col|, |fin_row|, |fin_align|. The preamble is copied directly, except that \.{\\tabskip} causes a change to the tabskip glue, thereby possibly expanding macros that immediately follow it. An appearance of \.{\\span} also causes such an expansion. Note that if the preamble contains `\.{\\global\\tabskip}', the `\.{\\global}' token survives in the preamble and the `\.{\\tabskip}' defines new tabskip glue (locally). */ static void get_preamble_token(void) { RESTART: get_token(); while ((cur_chr == span_code) && (cur_cmd == tab_mark_cmd)) { /*tex This token will be expanded once. */ get_token(); if (cur_cmd > max_command_cmd) { expand(); get_token(); } } if (cur_cmd == endv_cmd) fatal_error("(interwoven alignment preambles are not allowed)"); if ((cur_cmd == assign_glue_cmd) && (cur_chr == glue_base + tab_skip_code)) { scan_optional_equals(); scan_glue(glue_val_level); if (global_defs_par > 0) geq_define(glue_base + tab_skip_code, glue_ref_cmd, cur_val); else eq_define(glue_base + tab_skip_code, glue_ref_cmd, cur_val); goto RESTART; } } /*tex When \.{\\halign} or \.{\\valign} has been scanned in an appropriate mode, \TeX\ calls |init_align|, whose task is to get everything off to a good start. This mostly involves scanning the preamble and putting its information into the preamble list. */ void init_align(void) { /*tex |warning_index| value for error messages */ pointer save_cs_ptr; /*tex for short-term temporary use */ pointer p, r; /*tex \.{\\halign} or \.{\\valign}, usually */ save_cs_ptr = cur_cs; push_alignment(); /*tex enter a new alignment level */ align_state = -1000000; /*tex When \.{\\halign} is used as a displayed formula, there should be no other pieces of mlists present. */ if ((cur_list.mode_field == mmode) && ((cur_list.tail_field != cur_list.head_field) || (incompleat_noad_par != null))) { const char *hlp[] = { "Displays can use special alignments (like \\eqalignno)", "only if nothing but the alignment itself is between $$'s.", "So I've deleted the formulas that preceded this alignment.", NULL }; tex_error("Improper \\halign inside $$'s", hlp); flush_math(); } /*tex Enter a new semantic level. */ push_nest(); /*tex In vertical modes, |prev_depth| already has the correct value. But if we are in |mmode| (displayed formula mode), we reach out to the enclosing vertical mode for the |prev_depth| value that produces the correct baseline calculations. */ if (cur_list.mode_field == mmode) { cur_list.mode_field = -vmode; prev_depth_par = nest[nest_ptr - 2].prev_depth_field; } else if (cur_list.mode_field > 0) { cur_list.mode_field = -(cur_list.mode_field); } scan_spec(align_group); /*tex Scan the preamble. */ preamble = null; cur_align = align_head; cur_loop = null; scanner_status = aligning; warning_index = save_cs_ptr; align_state = -1000000; /*tex At this point, |cur_cmd=left_brace|. */ while (true) { /*tex Append the current tabskip glue to the preamble list. */ r = new_param_glue(tab_skip_code); vlink(cur_align) = r; cur_align = vlink(cur_align); if (cur_cmd == car_ret_cmd) { /*tex \.{\\cr} ends the preamble. */ break; } /*tex Scan preamble text until |cur_cmd| is |tab_mark| or |car_ret| and then scan the template \, putting the resulting token list in |hold_token_head|. Spaces are eliminated from the beginning of a template. */ p = hold_token_head; token_link(p) = null; while (1) { get_preamble_token(); if (cur_cmd == mac_param_cmd) break; if ((cur_cmd <= car_ret_cmd) && (cur_cmd >= tab_mark_cmd) && (align_state == -1000000)) { if ((p == hold_token_head) && (cur_loop == null) && (cur_cmd == tab_mark_cmd)) { cur_loop = cur_align; } else { const char *hlp[] = { "There should be exactly one # between &'s, when an", "\\halign or \\valign is being set up. In this case you had", "none, so I've put one in; maybe that will work.", NULL }; back_input(); tex_error("Missing # inserted in alignment preamble", hlp); break; } } else if ((cur_cmd != spacer_cmd) || (p != hold_token_head)) { r = get_avail(); token_link(p) = r; p = token_link(p); token_info(p) = cur_tok; } } r = new_node(align_record_node, 0); vlink(cur_align) = r; /*tex A new align record: */ cur_align = vlink(cur_align); span_ptr(cur_align) = end_span; width(cur_align) = null_flag; u_part(cur_align) = token_link(hold_token_head); /*tex Scan the template \, putting the resulting token list in |hold_token_head|. */ p = hold_token_head; token_link(p) = null; while (1) { CONTINUE: get_preamble_token(); if ((cur_cmd <= car_ret_cmd) && (cur_cmd >= tab_mark_cmd) && (align_state == -1000000)) break; if (cur_cmd == mac_param_cmd) { const char *hlp[] = { "There should be exactly one # between &'s, when an", "\\halign or \\valign is being set up. In this case you had", "more than one, so I'm ignoring all but the first.", NULL }; tex_error("Only one # is allowed per tab", hlp); goto CONTINUE; } r = get_avail(); token_link(p) = r; p = token_link(p); token_info(p) = cur_tok; } r = get_avail(); token_link(p) = r; p = token_link(p); /*tex Put \.{\\endtemplate} at the end: */ token_info(p) = end_template_token; v_part(cur_align) = token_link(hold_token_head); } scanner_status = normal; new_save_level(align_group); if (every_cr_par != null) begin_token_list(every_cr_par, every_cr_text); /*tex Look for \.{\\noalign} or \.{\\omit}. */ align_peek(); } /*tex The tricky part about alignments is getting the templates into the scanner at the right time, and recovering control when a row or column is finished. We usually begin a row after each \.{\\cr} has been sensed, unless that \.{\\cr} is followed by \.{\\noalign} or by the right brace that terminates the alignment. The |align_peek| routine is used to look ahead and do the right thing; it either gets a new row started, or gets a \.{\\noalign} started, or finishes off the alignment. */ void align_peek(void) { RESTART: align_state = 1000000; do { get_x_or_protected(); } while (cur_cmd == spacer_cmd); if (cur_cmd == no_align_cmd) { scan_left_brace(); new_save_level(no_align_group); if (cur_list.mode_field == -vmode) normal_paragraph(); } else if (cur_cmd == right_brace_cmd) { fin_align(); } else if ((cur_cmd == car_ret_cmd) && (cur_chr == cr_cr_code)) { /*tex Ignore \.{\\crcr}. */ goto RESTART; } else { /*tex Start a new row. */ init_row(); /*tex Start a new column and replace what we peeked at. */ init_col(); } } /*tex The parameter to |init_span| is a pointer to the alignrecord where the next column or group of columns will begin. A new semantic level is entered, so that the columns will generate a list for subsequent packaging. */ static void init_span(pointer p) { push_nest(); if (cur_list.mode_field == -hmode) { space_factor_par = 1000; } else { prev_depth_par = ignore_depth; normal_paragraph(); } cur_span = p; } /*tex To start a row (i.e., a `row' that rhymes with `dough' but not with `bough'), we enter a new semantic level, copy the first tabskip glue, and change from internal vertical mode to restricted horizontal mode or vice versa. The |space_factor| and |prev_depth| are not used on this semantic level, but we clear them to zero just to be tidy. */ void init_row(void) { push_nest(); cur_list.mode_field = (-hmode - vmode) - cur_list.mode_field; if (cur_list.mode_field == -hmode) space_factor_par = 0; else prev_depth_par = 0; tail_append(new_glue(preamble)); subtype(cur_list.tail_field) = tab_skip_code + 1; cur_align = vlink(preamble); cur_tail = cur_head; cur_pre_tail = cur_pre_head; init_span(cur_align); } /*tex When a column begins, we assume that |cur_cmd| is either |omit| or else the current token should be put back into the input until the \ template has been scanned. (Note that |cur_cmd| might be |tab_mark| or |car_ret|.) We also assume that |align_state| is approximately 1000000 at this time. We remain in the same mode, and start the template if it is called for. */ void init_col(void) { extra_info(cur_align) = cur_cmd; if (cur_cmd == omit_cmd) align_state = 0; else { back_input(); begin_token_list(u_part(cur_align), u_template); } /*tex now |align_state=1000000| */ } /*tex The scanner sets |align_state| to zero when the \ template ends. When a subsequent \.{\\cr} or \.{\\span} or tab mark occurs with |align_state=0|, the scanner activates the following code, which fires up the \ template. We need to remember the |cur_chr|, which is either |cr_cr_code|, |cr_code|, |span_code|, or a character code, depending on how the column text has ended. This part of the program had better not be activated when the preamble to another alignment is being scanned, or when no alignment preamble is active. */ void insert_vj_template(void) { if ((scanner_status == aligning) || (cur_align == null)) fatal_error("(interwoven alignment preambles are not allowed)"); cur_cmd = extra_info(cur_align); extra_info(cur_align) = cur_chr; if (cur_cmd == omit_cmd) begin_token_list(omit_template, v_template); else begin_token_list(v_part(cur_align), v_template); align_state = 1000000; } /*tex Determine the stretch order */ #define determine_stretch_order() do { \ if (total_stretch[filll]!= 0) o = filll; \ else if (total_stretch[fill] != 0) o = fill; \ else if (total_stretch[fil] != 0) o = fil; \ else if (total_stretch[sfi] != 0) o = sfi; \ else o=normal; \ } while (0) /*tex Determine the shrink order */ #define determine_shrink_order() do { \ if (total_shrink[filll] != 0) o = filll; \ else if (total_shrink[fill] != 0) o = fill; \ else if (total_shrink[fil] != 0) o = fil; \ else if (total_shrink[sfi] != 0) o = sfi; \ else o=normal; \ } while (0) /*tex When the |endv| command at the end of a \ template comes through the scanner, things really start to happen; and it is the |fin_col| routine that makes them happen. This routine returns |true| if a row as well as a column has been finished. */ boolean fin_col(void) { /*tex the alignrecord after the current one */ pointer p; /*tex temporary pointers for list manipulation */ pointer q, r; /*tex a new span node */ pointer s; /*tex a new unset box */ pointer u; /*tex natural width */ scaled w; /*tex order of infinity */ unsigned char o; /*tex span counter */ halfword n; if (cur_align == null) confusion("endv"); q = vlink(cur_align); if (q == null) confusion("endv"); if (align_state < 500000) fatal_error("(interwoven alignment preambles are not allowed)"); p = vlink(q); /*tex If the preamble list has been traversed, check that the row has ended. */ if ((p == null) && (extra_info(cur_align) < cr_code)) { if (cur_loop != null) { /*tex Lengthen the preamble periodically: */ r = new_node(align_record_node, 0); vlink(q) = r; /*tex A new align record: */ p = vlink(q); span_ptr(p) = end_span; width(p) = null_flag; cur_loop = vlink(cur_loop); /*tex Copy the templates from node |cur_loop| into node |p|. */ q = hold_token_head; r = u_part(cur_loop); while (r != null) { s = get_avail(); token_link(q) = s; q = token_link(q); token_info(q) = token_info(r); r = token_link(r); } token_link(q) = null; u_part(p) = token_link(hold_token_head); q = hold_token_head; r = v_part(cur_loop); while (r != null) { s = get_avail(); token_link(q) = s; q = token_link(q); token_info(q) = token_info(r); r = token_link(r); } token_link(q) = null; v_part(p) = token_link(hold_token_head); cur_loop = vlink(cur_loop); r = new_glue(cur_loop); vlink(p) = r; } else { const char *hlp[] = { "You have given more \\span or & marks than there were", "in the preamble to the \\halign or \\valign now in progress.", "So I'll assume that you meant to type \\cr instead.", NULL }; extra_info(cur_align) = cr_code; tex_error("Extra alignment tab has been changed to \\cr", hlp); } } if (extra_info(cur_align) != span_code) { unsave(); new_save_level(align_group); /*tex Package an unset box for the current column and record its width. */ if (cur_list.mode_field == -hmode) { adjust_tail = cur_tail; pre_adjust_tail = cur_pre_tail; u = filtered_hpack(cur_list.head_field, cur_list.tail_field, 0, additional, align_set_group, -1, 0, 0); w = width(u); cur_tail = adjust_tail; adjust_tail = null; cur_pre_tail = pre_adjust_tail; pre_adjust_tail = null; } else { u = filtered_vpackage(vlink(cur_list.head_field), 0, additional, 0, align_set_group, -1, 0, 0); w = height(u); } /*tex This represents a span count of 1: */ n = min_quarterword; if (cur_span != cur_align) { /*tex Update width entry for spanned columns. */ q = cur_span; do { incr(n); q = vlink(vlink(q)); } while (q != cur_align); if (n > max_quarterword) { /*tex This can happen, but won't. */ confusion("too many spans"); } q = cur_span; while (span_span(span_ptr(q)) < n) { q = span_ptr(q); } if (span_span(span_ptr(q)) > n) { s = new_span_node(span_ptr(q), n, w); span_ptr(q) = s; } else if (width(span_ptr(q)) < w) { width(span_ptr(q)) = w; } } else if (w > width(cur_align)) { width(cur_align) = w; } type(u) = unset_node; span_count(u) = (quarterword) n; determine_stretch_order(); glue_order(u) = o; glue_stretch(u) = total_stretch[o]; determine_shrink_order(); glue_sign(u) = o; glue_shrink(u) = total_shrink[o]; pop_nest(); vlink(cur_list.tail_field) = u; cur_list.tail_field = u; /*tex Copy the tabskip glue between columns. */ tail_append(new_glue(vlink(cur_align))); subtype(cur_list.tail_field) = tab_skip_code + 1; if (extra_info(cur_align) >= cr_code) { return true; } init_span(p); } align_state = 1000000; do { get_x_or_protected(); } while (cur_cmd == spacer_cmd); cur_align = p; init_col(); return false; } /*tex A span node is a 3-word record containing |width|, |span_span|, and |span_ptr| fields. The |span_span| field indicates the number of spanned columns; the |span_ptr| field points to a span node for the same starting column, having a greater extent of spanning, or to |end_span|, which has the largest possible |span_span| field; the |width| field holds the largest natural width corresponding to a particular set of spanned columns. A list of the maximum widths so far, for spanned columns starting at a given column, begins with the |span_ptr| field of the alignrecord for that column. The code has to make sure that there is room for |span_ptr| in both the alignrecord and the span nodes, which is why |span_ptr| replaces |node_attr|. The |new_span_node| function is defined in |texnodes.c|. */ /*tex This is normally |alink|: */ #ifndef span_span # define span_span(A) vlink((A)+1) #endif /*tex At the end of a row, we append an unset box to the current vlist (for \.{\\halign}) or the current hlist (for \.{\\valign}). This unset box contains the unset boxes for the columns, separated by the tabskip glue. Everything will be set later. */ void fin_row(void) { /*tex The new unset box: */ pointer p; if (cur_list.mode_field == -hmode) { p = filtered_hpack(cur_list.head_field, cur_list.tail_field, 0, additional, fin_row_group, -1, 0, 0); pop_nest(); if (cur_pre_head != cur_pre_tail) append_list(cur_pre_head, cur_pre_tail); append_to_vlist(p,lua_key_index(alignment)); if (cur_head != cur_tail) append_list(cur_head, cur_tail); } else { p = filtered_vpackage(vlink(cur_list.head_field), 0, additional, max_depth_par, fin_row_group, -1, 0, 0); pop_nest(); vlink(cur_list.tail_field) = p; cur_list.tail_field = p; space_factor_par = 1000; } type(p) = unset_node; glue_stretch(p) = 0; if (every_cr_par != null) begin_token_list(every_cr_par, every_cr_text); align_peek(); /*tex Note that |glue_shrink(p)=0| since |glue_shrink==shift_amount|. */ } /*tex Finally, we will reach the end of the alignment, and we can breathe a sigh of relief that memory hasn't overflowed. All the unset boxes will now be set so that the columns line up, taking due account of spanned columns. */ void fin_align(void) { /*tex registers for the list operations */ pointer p, q, r, s, u, rr; /*tex width of column */ scaled t, w; /*tex shift offset for unset boxes */ scaled o; /*tex matching span amount */ halfword n; /*tex temporary storage for |overfull_rule| */ scaled rule_save; /*tex temporary storage for |prev_depth| */ halfword pd; /*tex temporary storage for |new_glue| */ halfword ng; /*tex The |align_group| was for individual entries: */ if (cur_group != align_group) confusion("align1"); unsave(); /*tex The |align_group| was for the whole alignment: */ if (cur_group != align_group) confusion("align0"); unsave(); if (nest[nest_ptr - 1].mode_field == mmode) { o = display_indent_par; } else { o = 0; } /*tex Go through the preamble list, determining the column widths and changing the alignrecords to dummy unset boxes. It's time now to dismantle the preamble list and to compute the column widths. Let $w_{ij}$ be the maximum of the natural widths of all entries that span columns $i$ through $j$, inclusive. The alignrecord for column~$i$ contains $w_{ii}$ in its |width| field, and there is also a linked list of the nonzero $w_{ij}$ for increasing $j$, accessible via the |info| field; these span nodes contain the value $j-i+|min_quarterword|$ in their |link| fields. The values of $w_{ii}$ were initialized to |null_flag|, which we regard as $-\infty$. The final column widths are defined by the formula $$w_j=\max_{1\L i\L j}\biggl( w_{ij}-\sum_{i\L k1$. Then $w_2=w_{22}$. Then replace $w_{3j}$ by $\max(w_{3j},w_{2j}-t_2-w_2)$ for all $j>2$; and so on. If any $w_j$ turns out to be $-\infty$, its value is changed to zero and so is the next tabskip. */ q = vlink(preamble); do { flush_list(u_part(q)); flush_list(v_part(q)); p = vlink(vlink(q)); if (width(q) == null_flag) { /*tex Nullify |width(q)| and the tabskip glue following this column. */ width(q) = 0; r = vlink(q); reset_glue_to_zero(r); } if (span_ptr(q) != end_span) { /*tex Merge the widths in the span nodes of |q| with those of |p|, destroying the span nodes of |q|. Merging of two span-node lists is a typical exercise in the manipulation of linearly linked data structures. The essential invariant in the following |repeat| loop is that we want to dispense with node |r|, in |q|'s list, and |u| is its successor; all nodes of |p|'s list up to and including |s| have been processed, and the successor of |s| matches |r| or precedes |r| or follows |r|, according as |link(r)=n| or |link(r)>n| or |link(r) n) { s = span_ptr(s); n = span_span(span_ptr(s)) + 1; } if (span_span(r) < n) { span_ptr(r) = span_ptr(s); span_ptr(s) = r; decr(span_span(r)); s = r; } else { if (width(r) > width(span_ptr(s))) width(span_ptr(s)) = width(r); flush_node(r); } r = u; } while (r != end_span); } type(q) = unset_node; span_count(q) = min_quarterword; height(q) = 0; depth(q) = 0; glue_order(q) = normal; glue_sign(q) = normal; glue_stretch(q) = 0; glue_shrink(q) = 0; q = p; } while (q != null); /*tex Package the preamble list, to determine the actual tabskip glue amounts, and let |p| point to this prototype box. Now the preamble list has been converted to a list of alternating unset boxes and tabskip glue, where the box widths are equal to the final column sizes. In case of \.{\\valign}, we change the widths to heights, so that a correct error message will be produced if the alignment is overfull or underfull. */ decr(save_ptr); pack_begin_line = -cur_list.ml_field; if (cur_list.mode_field == -vmode) { rule_save = overfull_rule_par; /*tex Prevent the rule from being packaged. */ overfull_rule_par = 0; p = hpack(preamble, saved_value(0), saved_level(0), -1); overfull_rule_par = rule_save; } else { q = vlink(preamble); do { height(q) = width(q); width(q) = 0; q = vlink(vlink(q)); } while (q != null); p = filtered_vpackage(preamble, saved_value(0), saved_level(0), max_depth_par, preamble_group, -1, 0, 0); q = vlink(preamble); do { width(q) = height(q); height(q) = 0; q = vlink(vlink(q)); } while (q != null); } pack_begin_line = 0; /*tex Set the glue in all the unset boxes of the current list. */ q = vlink(cur_list.head_field); s = cur_list.head_field; while (q != null) { if (!is_char_node(q)) { if (type(q) == unset_node) { /*tex We set the unset box |q| and the unset boxes in it. The unset box |q| represents a row that contains one or more unset boxes, depending on how soon \.{\\cr} occurred in that row. */ if (cur_list.mode_field == -vmode) { type(q) = hlist_node; subtype(q) = align_row_list; width(q) = width(p); } else { type(q) = vlist_node; subtype(q) = align_row_list; height(q) = height(p); } glue_order(q) = glue_order(p); glue_sign(q) = glue_sign(p); glue_set(q) = glue_set(p); shift_amount(q) = o; r = vlink(list_ptr(q)); if (type(r) != unset_node) { formatted_error("alignment","bad box"); } s = vlink(list_ptr(p)); do { /*tex We set the glue in node |r| and change it from an unset node. A box made from spanned columns will be followed by tabskip glue nodes and by empty boxes as if there were no spanning. This permits perfect alignment of subsequent entries, and it prevents values that depend on floating point arithmetic from entering into the dimensions of any boxes. */ n = span_count(r); t = width(s); w = t; u = hold_head; while (n > min_quarterword) { decr(n); /*tex Append tabskip glue and an empty box to list |u|, and update |s| and |t| as the prototype nodes are passed. */ s = vlink(s); ng = new_glue(s); vlink(u) = ng; u = vlink(u); subtype(u) = tab_skip_code + 1; t = t + width(s); if (glue_sign(p) == stretching) { if (stretch_order(s) == glue_order(p)) t = t + round(float_cast(glue_set(p)) * float_cast(stretch(s))); } else if (glue_sign(p) == shrinking) { if (shrink_order(s) == glue_order(p)) t = t - round(float_cast(glue_set(p)) * float_cast(shrink(s))); } s = vlink(s); rr = new_null_box(); vlink(u) = rr; u = vlink(u); t = t + width(s); subtype(u) = align_cell_list; if (cur_list.mode_field == -vmode) { width(u) = width(s); } else { type(u) = vlist_node; height(u) = width(s); } } if (cur_list.mode_field == -vmode) { /*tex Make the unset node |r| into an |hlist_node| of width |w|, setting the glue as if the width were |t|. */ height(r) = height(q); depth(r) = depth(q); if (t == width(r)) { glue_sign(r) = normal; glue_order(r) = normal; set_glue_ratio_zero(glue_set(r)); } else if (t > width(r)) { glue_sign(r) = stretching; if (glue_stretch(r) == 0) set_glue_ratio_zero(glue_set(r)); else glue_set(r) = unfloat((double) (t - width(r)) / glue_stretch(r)); } else { glue_order(r) = glue_sign(r); glue_sign(r) = shrinking; if (glue_shrink(r) == 0) set_glue_ratio_zero(glue_set(r)); else if ((glue_order(r) == normal) && (width(r) - t > glue_shrink(r))) set_glue_ratio_one(glue_set(r)); else glue_set(r) = unfloat((double) (width(r) - t) / glue_shrink(r)); } width(r) = w; type(r) = hlist_node; subtype(r) = align_cell_list; } else { /*tex Make the unset node |r| into a |vlist_node| of height |w|, setting the glue as if the height were |t|. */ width(r) = width(q); if (t == height(r)) { glue_sign(r) = normal; glue_order(r) = normal; set_glue_ratio_zero(glue_set(r)); } else if (t > height(r)) { glue_sign(r) = stretching; if (glue_stretch(r) == 0) set_glue_ratio_zero(glue_set(r)); else glue_set(r) = unfloat((t - height(r)) / glue_stretch(r)); } else { glue_order(r) = glue_sign(r); glue_sign(r) = shrinking; if (glue_shrink(r) == 0) set_glue_ratio_zero(glue_set(r)); else if ((glue_order(r) == normal) && (height(r) - t > glue_shrink(r))) set_glue_ratio_one(glue_set(r)); else glue_set(r) = unfloat((height(r) - t) / glue_shrink(r)); } height(r) = w; type(r) = vlist_node; subtype(r) = align_cell_list; } shift_amount(r) = 0; if (u != hold_head) { /*tex Append blank boxes to account for spanned nodes. */ vlink(u) = vlink(r); vlink(r) = vlink(hold_head); r = u; } r = vlink(vlink(r)); s = vlink(vlink(s)); } while (r != null); } else if (type(q) == rule_node) { /*tex Make the running dimensions in rule |q| extend to the boundaries of the alignment. */ if (is_running(width(q))) width(q) = width(p); if (is_running(height(q))) height(q) = height(p); if (is_running(depth(q))) depth(q) = depth(p); if (o != 0) { r = vlink(q); vlink(q) = null; q = hpack(q, 0, additional, -1); shift_amount(q) = o; subtype(q) = align_cell_list; vlink(q) = r; vlink(s) = q; } } } s = q; q = vlink(q); } flush_node_list(p); pop_alignment(); /*tex We now have a completed alignment, in the list that starts at |cur_list.head_field| and ends at |cur_list.tail_field|. This list will be merged with the one that encloses it. (In case the enclosing mode is |mmode|, for displayed formulas, we will need to insert glue before and after the display; that part of the program will be deferred until we're more familiar with such operations.) */ pd = prev_depth_par; p = vlink(cur_list.head_field); q = cur_list.tail_field; pop_nest(); if (cur_list.mode_field == mmode) { finish_display_alignment(p, q, pd); } else { prev_depth_par = pd; vlink(cur_list.tail_field) = p; if (p != null) cur_list.tail_field = q; if (cur_list.mode_field == vmode) { if (!output_active) lua_node_filter_s(buildpage_filter_callback,lua_key_index(alignment)); build_page(); } } } /*tex The token list |omit_template| just referred to is a constant token list that contains the special control sequence \.{\\endtemplate} only. */ void initialize_alignments(void) { token_info(omit_template) = end_template_token; span_span(end_span) = max_quarterword + 1; span_ptr(end_span) = null; }