\input texinfo @setfilename dvips.info @settitle Dvips: A DVI-to-PostScript translator @set version 2024.1 @set month-year February 2024 @copying This manual documents Dvips version @value{version} (@value{month-year}), a program to translate a DVI file into PostScript. You may freely use, modify and/or distribute this file. @end copying @c Define a new index for filenames and options. @defcodeindex fl @defcodeindex op @c Put everything in one index (arbitrarily chosen to be the concept index). @syncodeindex fl cp @syncodeindex fn cp @syncodeindex ky cp @syncodeindex op cp @syncodeindex pg cp @syncodeindex vr cp @dircategory TeX @direntry * DVI-to-PostScript: (dvips). Translating TeX DVI files to PostScript. * afm2tfm: (dvips)Invoking afm2tfm. Making Type 1 fonts available to TeX. * dvips: (dvips)Invoking Dvips. DVI-to-PostScript translator. @end direntry @titlepage @title Dvips: A DVI-to-PostScript Translator @subtitle for version @value{version} @subtitle @value{month-year} @author Tomas Rokicki @author @url{https://tug.org/dvips} @page @insertcopying @vskip 0pt plus 1filll @end titlepage @summarycontents @contents @ifnottex @node Top @top Dvips @insertcopying @menu * Why Dvips:: Why use Dvips? * Installation:: How to compile and install Dvips. * Invoking Dvips:: Command-line options, configuration files, etc. * Paper size and landscape:: Changing the paper dimensions. * Interaction with PostScript:: TeX meets Dvips meets PostScript. * PostScript fonts:: Installing and using PostScript fonts. * Color:: Using color with Dvips. * Index:: General index. @end menu @end ifnottex @node Why Dvips @chapter Why use Dvips? The Dvips program has a number of features that set it apart from other PostScript drivers for @TeX{}. This rather long section describes the advantages of using Dvips, and may be skipped if you are just interested in learning how to use the program. @xref{Installation}, for details of compilation and installation. The Dvips driver generates excellent, standard PostScript, that can be included in other documents as figures or printed through a variety of spoolers. The generated PostScript requires very little printer memory, so very complex documents with a lot of fonts can easily be printed even on PostScript printers without much memory, such as the original Apple LaserWriter. The PostScript output is also compact, requiring less disk space to store and making it feasible as a transfer format. Even those documents that are too complex to print in their entirety on a particular printer can be printed, since Dvips will automatically split such documents into pieces, reclaiming the printer memory between each piece. The Dvips program supports graphics in a natural way, allowing PostScript graphics to be included and automatically scaled and positioned in a variety of ways. Printers with any resolution are supported, even if they have different resolutions in the horizontal and vertical directions. High resolution output is supported for typesetters, including an option that compresses the bitmap fonts so that typesetter virtual memory is not exhausted. This option also significantly reduces the size of the PostScript file and decoding in the printer is very fast. Missing fonts can be automatically generated if Metafont exists on the system, or fonts can be converted from GF to PK format on demand. If a font cannot be generated, a scaled version of the same font at a different size can be used instead, although Dvips will complain loudly about the poor aesthetics of the resulting output. One of the most important features is the support of virtual fonts, which add an entirely new level of flexibility to @TeX{}. Dvips even comes with its own Afm2tfm program that can create the virtual fonts and @TeX{} font metric files automatically from Adobe font metric files. Source is provided and freely distributable, so adding a site-specific feature is possible. Adding such features is made easier by the highly modular structure of the program. @cindex Rokicki, Tomas Tom Rokicki wrote and maintains the original Dvips program. @node Installation @chapter Installation @cindex configuration, of Dvips @cindex compilation @cindex installation, of Dvips @c ifset version @c (A copy of this chapter is in the distribution file @file{dvipsk/INSTALL}.) @c end ifset Installing Dvips is mostly the same as installing any Kpathsea-using program. Therefore, for the basic steps involved, @pxref{Installation,,, kpathsea, Kpathsea}. For solutions to common installation problems and information on how to report a bug, see the file @file{kpathsea/BUGS} (@pxref{Bugs,,, kpathsea, Kpathsea}). For solutions to Dvips-specific problems, @pxref{Debug options}. Dvips does require some additional installation, detailed in the sections below. Also, to configure color devices, @pxref{Color device configuration}. @menu * config.ps installation:: Printer and site Dvips configuration. * PostScript font installation:: Many PostScript fonts are freely available. * Ghostscript installation:: A free PostScript interpreter. * Diagnosing problems:: Some common runtime difficulties. @end menu @node config.ps installation @section @file{config.ps} installation @flindex config.ps @r{installation} @cindex installation of @file{config.ps} @cindex printer configuration @cindex paper size, default @cindex configuration files, creating Dvips has its own configuration files: a file @file{config.ps} for sitewide defaults, and a file @file{config.@var{printer}} for each printer (output device). Since these are site-specific, @code{make install} does not create them; you must create them yourself. (These Dvips configuration files are independent of the Kpathsea configuration file @file{texmf.cnf} (@pxref{Config files,,,kpathsea, Kpathsea}). @flindex config.proto @cindex prototype printer configuration file @cindex printer configuration file, prototype @cindex configuration files, prototype Dvips configuration files contents and searching are described fully in @ref{Config files}. The simplest way to create a new configuration file is to copy and modify the file @file{dvipsk/contrib/config.proto}, seasoning with options to your taste from @ref{Config files}. Here is @file{config.proto} for your reading pleasure: @example @include contrib/config.proto @end example @node PostScript font installation @section PostScript font installation @cindex installation of PostScript fonts @cindex fonts, installation of PostScript @cindex PostScript fonts, installing To use PostScript fonts with @TeX{} and Dvips, you need both metric files (@file{.tfm} and @file{.vf}) and the outlines (@file{.pfa} or @file{.pfb}). @xref{Font concepts}. Current @TeX{} systems come with support for 35 base PostScript fonts and many more. @cindex fonts, system PostScript @cindex PostScript fonts, on your system @flindex psfonts.map If you have additional PostScript fonts, you can make them available to Dvips by (1)@tie{}giving them appropriate filenames; and (2)@tie{}running Afm2tfm (@pxref{Making a font available}) to make TFM and VF metrics for @TeX{} and Dvips to use. Also add them to @file{psfonts.map} (@pxref{psfonts.map}); this file must contain everything available in the system. The @code{updmap} program is usually used to maintain @file{psfonts.map}; run @samp{updmap --help} for lots of information about how it works. @node Ghostscript installation @section Ghostscript installation @cindex Ghostscript installation @pindex gs @r{installation} @cindex Deutsch, Peter @cindex Epson printers @cindex previewing Dvips output @cindex PostScript previewers @cindex PDF files, making @cindex Aladdin Ghostscript Ghostscript is a PostScript interpreter freely available to end-users, originally written by Peter Deutsch. It can read the PostScript produced by Dvips and render it on your monitor, or for another device (e.g., an Epson printer) that does not support PostScript, or in PDF format. The latest version is available via @url{https://ghostscript.com}. @cindex Theisen, Tim @pindex ghostview @cindex Ghostview, and no @samp{N} @cindex EPS, and Ghostview @cindex standard PostScript, required by Ghostview @findex %%Page@r{, required by Ghostview} The program Ghostview, originally written by Johannes Plass and Tim Theisen, provides typical previewing capabilities (next page/previous page, magnification, etc.). It requires Ghostscript to run, and files in structured PostScript, specifically with @samp{%%Page} comments (no @samp{N} in @file{config.ps}). The current version is known as GV, and is available from @url{https://www.gnu.org/software/gv}. @node Diagnosing problems @section Diagnosing problems @cindex problems @cindex trouble @cindex debugging You've gone through all the trouble of installing Dvips, carefully read all the instructions in this manual, and still can't get something to work. The following sections provide some helpful hints if you find yourself in such a situation. For details on effective bug reporting, common installation problems, and @code{mktexpk} problems, @pxref{Bugs,,, kpathsea, Kpathsea}. A good first debugging operation is to set the environment variable @env{DVIPSDEBUG}, which will display any configuration and map files read by Dvips. This way you can be sure it's finding the files and settings you expect. @menu * Debug options:: Getting diagnostics. * No output:: No output at all. * Small or inverted:: Output too small or inverted. * Printer errors:: The printer sends back errors. * Long documents fail:: Long documents fail to print. * Including graphics fails:: Figures don't work. @end menu @node Debug options @subsection Debug options @cindex debugging options @cindex options, debugging The @samp{-d} flag to Dvips helps in tracking down certain errors. The parameter to this flag is an integer that tells what errors are currently being tracked. To track a certain class of debug messages, specify the appropriate number given below; if you wish to track multiple classes, sum the numbers of the classes you wish to track. To track all classes, you can use @code{-1}. You can also set the environment variable @env{KPATHSEA_DEBUG} instead of using @samp{-d}. Some of these debugging options are actually provided by Kpathsea (@pxref{Debugging, , , kpathsea, Kpathsea}). The classes are: @table @asis @item 1 specials @item 2 paths @item 4 fonts @item 8 pages @item 16 headers @item 32 font compression @item 64 files @item 128 (omitted) @item 256 config files @item 512 Kpathsea @code{stat} calls @item 1024 Kpathsea hash table lookups @item 2048 Kpathsea path element expansion @item 4096 Kpathsea path searches @end table @node No output @subsection No output at all @cindex output, none @cindex no output at all @cindex failure, to print at all If you are not getting any output at all, even from the simplest one-character file (for instance, @samp{\ \bye}), then something is very wrong. Practically any file sent to a PostScript laser printer should generate some output, at the very least a page detailing what error occurred, if any. Talk to your system administrator about downloading a PostScript error handler. (Adobe distributes a good one called @samp{ehandler.ps}.) @flindex ehandler.ps @cindex PowerPage PostScript implementation @cindex Shinko CHC-S446i printer @cindex Mitsubishi Shinko CHC-S446i printer It is possible, especially if you are using non-Adobe PostScript, that your PostScript interpreter is broken. Even then it should generate an error message. Dvips tries to work around as many bugs as possible in common non-Adobe PostScript interpreters, but doubtless it misses a few. PowerPage Revision 1, Interpreter Version 20001.001, on a Mitsubishi Shinko CHC-S446i color thermal dye sublimation printer is known to be unable to print with any but builtin fonts. If Dvips gives any strange error messages, or compilation on your machine generated a lot of warnings, perhaps the Dvips program itself is broken. Try using the debug options to determine where the error occurred (@pxref{Debug options}). It is possible your spooler is broken and is misinterpreting the structured comments. Try the @samp{-N} flag to turn off structured comments and see what happens. @node Small or inverted @subsection Output too small or inverted @cindex output, too small @cindex output, inverted @cindex inverted output @cindex too-small output @cindex save/restore, and inverted output If some documents come out inverted or too small, probably your spooler is not supplying an end of job indicator at the end of each file. (This commonly happens on small machines that don't have spoolers.) You can force Dvips to do this with the @samp{-F} flag (or @samp{F} config file option), but this generates files with a terminating binary character (control-D). You can also try using the @samp{-s} flag (or @samp{s} config file option) to enclose the entire job in a save/restore pair. @xref{Command-line options}, and @ref{Config files}. @node Printer errors @subsection Error messages from printer @cindex printer errors @cindex error messages from printer @cindex failure, and printer errors @cindex @t{bop undefined} error If your printer returns error messages, the error message gives very good information on what might be going wrong. One of the most common error messages is @samp{bop undefined}. This is caused by old versions of Transcript and other spoolers that do not properly parse the setup section of the PostScript. To fix this, turn off structured comments with the @samp{-N} option, but it'd be best to get your spooling software updated. @cindex VM exhausted @cindex printer memory exhausted @cindex memory of printer exhausted Another error message is @samp{VM exhausted}. Some printers indicate this error by locking up, others quietly reset. This is caused by Dvips thinking that the printer has more memory than it actually does, and then printing a complicated document. To fix this, try lowering the @samp{m} parameter in the configuration file; use the debug option to make sure you adjust the correct file. Other errors may indicate you are trying to include graphics that don't nest properly in other PostScript documents, among other things. Try the PostScript file on a QMS PS-810 or other Adobe PostScript printer if you have one, or Ghostscript (@pxref{Ghostscript installation}); it might be a problem with the printer itself. @node Long documents fail @subsection Long documents fail to print @cindex long documents not printing @cindex failure, of long documents This is usually caused by incorrectly specifying the amount of memory the printer has in the configuration file; see the previous section. @node Including graphics fails @subsection Including graphics fails @cindex including graphics fails @cindex graphics inclusion fails @cindex failure, to include graphics The most common problem with including graphics is an incorrect bounding box (@pxref{Bounding box}). Complain to whoever wrote the software that generated the file if the bounding box is indeed incorrect. @cindex Illustrator, workaround for Another possible problem is that the figure you are trying to include does not nest properly; there are certain rules PostScript applications must follow when generating files to be included. The Dvips program includes work-arounds for such errors in Adobe Illustrator and other programs, but there are certainly applications that haven't been tested. One possible thing to try is the @samp{-K} flag which strips the comments from an included figure. This might be necessary if the PostScript spooling software does not read the structured comments correctly. Use of this flag will break graphics from some applications, though, since some applications read the PostScript file from the input stream, looking for a particular comment. @cindex binary files, not supported Any application which generates graphics output containing raw binary (not ASCII hex) will probably fail with Dvips. @node Invoking Dvips @chapter Invoking Dvips @cindex command-line options @cindex options, Dvips @cindex invoking Dvips Dvips reads a DVI file as output by (for example) @TeX{}, and converts it to PostScript, taking care of builtin or downloaded PostScript fonts, font reencoding, color, etc. These features are described in other chapters in this document. There many ways to control Dvips' behavior: configuration files, environment variables, and command-line options. @menu * Basic usage:: * Command-line options:: * Environment variables:: * Config files:: @end menu @node Basic usage @section Basic usage of Dvips @cindex usage, basic To use Dvips at its simplest, simply type @example dvips foo @end example @noindent where @file{foo.dvi} is the output of @TeX{} that you want to print. The default output is to a corresponding file @file{foo.ps}; Dvips may also have been locally configured to output directly to a printer by default. If you use fonts that have not been used on your system before, they may be automatically generated; this process can take a few minutes, so progress reports appear by default. The next time that document is printed, these fonts will have been saved in the proper directories, so printing will go much faster. (If Dvips tries to endlessly generate the same fonts over and over again, it hasn't been installed properly. @xref{Unable to generate fonts,,, kpathsea, Kpathsea}.) Many options are available (see the next section). For a brief summary of available options, run @example dvips --help @end example @node Command-line options @section Command-line options Dvips has a plethora of command line options. Reading through this section will give a good idea of the capabilities of the driver. @menu * Option summary:: Quick listing, from Dvips --help. * Option details:: More information about each option. @end menu @node Option summary @subsection Option summary @cindex options, summary Here is a handy summary of the options; it is printed out when you run Dvips with no arguments or with the standard @samp{--help} option. @opindex --help @verbatiminclude dvips.help @node Option details @subsection Option details @cindex option, details of Many of the parameterless options listed here can be turned off by suffixing the option with a zero (@samp{0}); for instance, to turn off page reversal, use @samp{-r0}. Such options are marked with a trailing @samp{*}. @table @samp @item - @opindex - @cindex options, reading from standard input @cindex standard input, reading options from Read additional options from standard input after processing the command line. @item --help @opindex --help Print a usage message and exit. @item --version @opindex --version Print the version number and exit. @item -a* @opindex -a @cindex memory, conserving Conserve memory by making three passes over the DVI file instead of two and only loading those characters actually used. Generally only useful on machines with a very limited amount of memory, like some PCs. @item -A @opindex -A @cindex odd pages only Print only the odd pages. This option uses @TeX{} page numbers, not physical page numbers. @item -b @var{num} @opindex -b @var{num} @vindex /#copies @cindex copies, duplicated page bodies @cindex color separations Generate @var{num} copies of each page, but duplicating the page body rather than using the @samp{/#copies} PostScript variable. This can be useful in conjunction with a header file setting @samp{bop-hook} to do color separations or other neat tricks. @item -B @opindex -B @cindex even pages only @cindex double-sided printing Print only the even pages. This option uses @TeX{} page numbers, not physical page numbers. @item -bitmapfontenc @var{option} @opindex -bitmapfontenc @var{option} @cindex bitmap font encoding Turns bitmap font encoding to @samp{off}, @samp{on} (no warnings for missing bitmap font encodings), or @samp{strict} (with warnings for missing bitmap font encodings). @item -c @var{num} @opindex -c @var{num} @vindex /#copies @cindex copies, uncollated @cindex uncollated copies Generate @var{num} consecutive copies of every page, i.e., the output is uncollated. This merely sets the builtin PostScript variable @samp{/#copies}. @item -C @var{num} @opindex -C @var{num} @cindex copies, collated @cindex collated copies Generate @var{num} copies, but collated (by replicating the data in the PostScript file). Slower than the @samp{-c} option, but easier on the hands, and faster than resubmitting the same PostScript file multiple times. @item -d @var{num} @opindex -d @var{num} @cindex debugging Set the debug flags, showing what Dvips (thinks it) is doing. This will work unless Dvips has been compiled without the @samp{DEBUG} option (not recommended). @xref{Debug options}, for the possible values of @var{num}. Use @samp{-d -1} as the first option for maximum output. @item -D @var{num} @opindex -D @var{num} @cindex resolution, setting Set both the horizontal and vertical resolution to @var{num}, given in dpi (dots per inch). This affects the choice of bitmap fonts that are loaded and also the positioning of letters in resident PostScript fonts. Must be between 10 and 10000. This affects both the horizontal and vertical resolution. If a high resolution (something greater than 400 dpi, say) is selected, the @samp{-Z} flag should probably also be used. If you are using fonts made with Metafont, such as Computer Modern, @file{mktexpk} needs to know about the value for @var{num} that you use or Metafont will fail. See the file @url{ftp://ftp.tug.org/tex/modes.mf} for a list of resolutions and mode names for most devices. @item -e @var{num} @opindex -e @var{num} @cindex maxdrift @cindex accuracy in positioning @cindex positioning accuracy Maximum drift in pixels of each character from its `true' resolution-independent position on the page. The default value of this parameter is resolution dependent (it is the number of entries in the list [100, 200, 300, 400, 500, 600, 800, 1000, 1200, 1600, 2000, 2400, 2800, 3200, @dots{}] that are less than or equal to the resolution in dots per inch). Allowing individual characters to `drift' from their correctly rounded positions by a few pixels, while regaining the true position at the beginning of each new word, improves the spacing of letters in words. @item -E* @opindex -E @cindex EPSF, generating @cindex tight bounding box, finding @cindex bounding box, finding tight Generate an EPSF file with a tight bounding box. This only looks at marks made by characters and rules, not by any included graphics. In addition, it gets the glyph metrics from the TFM file, so characters that print outside their enclosing TFM box may confuse it. In addition, the bounding box might be a bit too loose if the character glyph has significant left or right side bearings. Nonetheless, this option works well enough for creating small EPSF files for equations or tables or the like. (Of course, Dvips output, especially when using bitmap fonts, is resolution-dependent and thus does not make very good EPSF files, especially if the images are to be scaled; use these EPSF files with care.) For multiple page input files, also specify @samp{-i} to get each page as a separate EPSF file; otherwise, all the pages are overlaid in the single output file. @item -f* @opindex -f @cindex filter, running as a @cindex standard I/O @cindex pipes, not readable @vindex PRINTER@r{, avoided with @samp{-f}} Run as a filter. Read the DVI file from standard input and write the PostScript to standard output. The standard input must be seekable, so it cannot be a pipe. If your input must be a pipe, write a shell script that copies the pipe output to a temporary file and then points Dvips at this file. This option also disables the automatic reading of the @code{PRINTER} environment variable; use @samp{-P$PRINTER} after the @samp{-f} to read it anyway. It also turns off the automatic sending of control-D if it was turned on with the @samp{-F} option or in the configuration file; use @samp{-F} after the @samp{-f} to send it anyway. @item -F* @opindex -F @cindex EOF @cindex control-D @cindex printer, driving directly @cindex spooler, lacking Write control-D (ASCII code 4) as the very last character of the PostScript file. This is useful when Dvips is driving the printer directly instead of working through a spooler, as is common on personal systems. On systems shared by more than one person, this is not recommended. @item -G* @opindex -G @cindex low characters, shifting @cindex non-printing characters, shifting Shift non-printing characters (ASCII 0-32, 127) to higher-numbered positions. This was useful to work around bugs in old versions of Adobe's PDF reader. It's more likely to cause problems nowadays. @item -h @var{name} @opindex -h @var{name} @cindex header file, downloading @cindex userdict@r{, used for header files} Prepend @var{name} as an additional header file, or, if @var{name} is @samp{-}, suppress inclusion of default header files. If @code{-h} is given multiple times, the headers are included in the order given. Any definitions in the header file get added to the PostScript @samp{userdict}. @item -i* @opindex -i @cindex sections output, in separate files @cindex multiple output files @cindex output files, multiple Make each section be a separate file; a @dfn{section} is a part of the document processed independently, most often created to avoid memory overflow. The filenames are created replacing the suffix of the supplied output file name by a three-digit sequence number. This option is most often used in conjunction with the @samp{-S} option which sets the maximum section length in pages; if @samp{-i} is specified and @samp{-S} is not, each page is output as a separate file. For instance, some phototypesetters cannot print more than ten or so consecutive pages before running out of steam; these options can be used to automatically split a book into ten-page sections, each to its own file. On the other hand, if your document uses very large fonts or very large included figures, Dvips might take it upon itself to split the output into unwanted sections, to try to avoid overflowing printer memory. @xref{Headers and memory usage}, for ways to handle this. @item -j* @opindex -j @r{for partial font downloading} Download only needed characters from Type 1 fonts. This is the default in the current release. Some debugging flags trace this operation (@pxref{Debug options}). You can also control partial downloading on a per-font basis (@pxref{psfonts.map}). @item -k* @opindex -k @r{for cropmarks} @cindex cropmarks @flindex crop.pro Print crop marks. This option increases the paper size (which should be specified, either with a paper size special or with the @samp{-T} option) by a half inch in each dimension. It translates each page by a quarter inch and draws cross-style crop marks. It is mostly useful with typesetters that can set the page size automatically. This works by downloading @file{crop.pro}. @item -K* @opindex -K @cindex comments, removing included @findex %%Page@r{, removing} Remove comments in included PostScript graphics, font files, and headers; only necessary to get around bugs in spoolers or PostScript post-processing programs. Specifically, the @samp{%%Page} comments, when left in, often cause difficulties. Use of this flag can cause other graphics to fail, however, since the PostScript header macros from some software packages read portion the input stream line by line, searching for a particular comment. @item -l [=]@var{num}[.@var{pageseq}] @opindex -l [=]@var{num}[.@var{pageseq}] @cindex last page printed @cindex page, last printed @cindex page numbers, multiple repetitions of @cindex physical page number, and @samp{-l} @cindex absolute page number, and @samp{-l} The last page printed will be the first one numbered @var{num}; the default is the last page in the document. By default, @var{num} is compared to @TeX{}'s idea of the page number (more precisely, the @code{\count0} value written in the DVI file). But if @var{num} is prefixed by an equals sign, then it (and the argument to the @samp{-p} option, if specified) is treated as a physical (absolute) page number, Thus, using @samp{-l =9} will end the output with the ninth page of the document, no matter what the pages are actually numbered. On the other hand, if @var{pageseq} is specified, the @var{pageseq}th occurrence of the given @TeX{} page number is used. For example, @samp{-l 99.2} says to end with the second page numbered 99 in the document. The @samp{=} and @var{lastseq} features aren't useful together. @item -L* @opindex -L @cindex @samp{papersize} special, first vs.@: last By default or with @code{-L1}, the last @samp{papersize} special wins; with @code{-L0}, the first special wins. @xref{@samp{papersize} special}. @item -landscaperotate* @opindex -landscaperotate @cindex landscaperotate When looking for matching paper sizes, permit rotation of page content on the page to match the given size; the default, as of Dvips 2022.1, is not to do this. It should not be needed in modern systems with normal print spoolers, and can be harmful when converting to PDF (@pxref{Config file paper sizes}). This option accepts an optional suffix of 0 (to explicitly disable) or 1 (to explicitly enable); if the option is specified without a suffix, it enables the behavior. @item -m* @opindex -m @cindex manual feed Specify manual feed, if supported by the output device. @item -mode @var{mode} @opindex -mode @var{mode} @cindex mode name, specifying @cindex Metafont mode, specifying Use @var{mode} as the Metafont device name for path searching and font generation. This overrides any value from configuration files. With the default paths, explicitly specifying the mode also makes the program assume the fonts are in a subdirectory named @var{mode}. @xref{TeX directory structure,, @TeX{} directory structure, kpathsea, Kpathsea}. If Metafont does not understand the @var{mode} name, see @ref{Unable to generate fonts,,, kpathsea, Kpathsea}. @item -M* @opindex -M @cindex font generation, avoiding @pindex mktexpk@r{, avoiding} @flindex missfont.log @comment this description repeated in kpathsea.texi Turns off automatic font generation (@file{mktexpk}). If @code{mktexpk}, the invocation is appended to a file @file{missfont.log} (by default) in the current directory. You can then execute the log file to create the missing files after fixing the problem. @vindex TEXMFOUTPUT @vindex MISSFONT_LOG If the current directory is not writable and the environment variable or configuration file value @samp{TEXMFOUTPUT} is set, its value is used. Otherwise, nothing is written. The name @samp{missfont.log} is overridden by the @samp{MISSFONT_LOG} environment variable or configuration file value. @item -n @var{num} @opindex -n @var{num} @cindex maximum pages printed @cindex pages, maximum printed Print at most @var{num} pages. Default is 100000. @item -N* @opindex -N @cindex structured comments @cindex TranScript @findex %%Page@r{, not generating} Turns off generation of structured comments such as @samp{%%Page}; this may be necessary on some systems that try to interpret PostScript comments in weird ways, or on some PostScript printers. Old versions of TranScript in particular cannot handle modern Encapsulated PostScript. Beware: This also disables page movement, etc., in PostScript viewers such as Ghostview. @item -noomega @opindex -noomega @cindex Omega extensions @cindex p@TeX{} extensions Disable the use of Omega extensions when interpreting DVI files. By default, the additional opcodes @samp{129} and @samp{134} are recognized by Dvips as Omega or p@TeX{} extensions and interpreted as requests to set 2-byte characters. @item -noptex @opindex -noptex @cindex p@TeX{} extensions Disable the use of p@TeX{} extensions when interpreting DVI files. By default, the additional opcodes @samp{130} and @samp{135} are recognized by Dvips as Omega extensions and interpreted as requests to set 3-byte characters, and @samp{255} as request to change the typesetting direction. The only drawback is that the virtual font array will (at least temporarily) require 65536 or more positions instead of the default 256 positions, i.e., the memory requirements of Dvips will be somewhat larger. If you find this unacceptable or encounter another problem with the Omega or p@TeX{} extensions, you can switch off the p@TeX{} extension by using @samp{-noptex}, or both by using @samp{-noomega} (but please do send a bug report if you find such problems, @pxref{Bugs,,, kpathsea, Kpathsea}). @item -o @var{name} @opindex -o @var{name} @cindex output, redirecting @cindex standard output, output to Send output to the file @var{name}. If @samp{-o} is specified without @var{name} (i.e., it is the last thing on the command line), the default is @samp{@var{file}.ps} where the input DVI file was @samp{@var{file}.dvi}. If @samp{-o} isn't given at all, the configuration file default is used. @findex popen @r{for output} @kindex - @r{as output filename} @kindex ! @r{starting output filename} @kindex | @r{starting output filename} @cindex lpr spooler, MS-DOS emulation @cindex spooling to lpr on MS-DOS If @var{name} is @samp{-}, output goes to standard output. If the first character of @var{name} is @samp{!} or @samp{|}, then the remainder will be used as an argument to @code{popen}; thus, specifying @samp{|lpr} as the output file will automatically queue the file for printing as usual. (The MS-DOS version will print to the local printer device @file{PRN} when @var{name} is @samp{|lpr} and a program by that name cannot be found.) @samp{-o} disables the automatic reading of the @code{PRINTER} environment variable, and turns off the automatic sending of control-D. See the @samp{-f} option for how to override this. @item -O @var{x-offset},@var{y-offset} @opindex -O @var{x-offset},@var{y-offset} @cindex offset pages @cindex printer offset Move the origin by @var{x-offset},@var{y-offset}, a comma-separated pair of dimensions such as @samp{.1in,-.3cm} (@pxref{@samp{papersize} special}). The origin of the page is shifted from the default position (of one inch down, one inch to the right from the upper left corner of the paper) by this amount. This is usually best specified in the printer-specific configuration file. @flindex testpage.tex This is useful for a printer that consistently offsets output pages by a certain amount. You can use the file @file{testpage.tex} to determine the correct value for your printer. Be sure to do several runs with the same @code{O} value---some printers vary widely from run to run. @findex bop-hook@r{, and offset pages} If your printer offsets every other page consistently, instead of every page, your best recourse is to use @samp{bop-hook} (@pxref{PostScript hooks}). @item -p [=]@var{num}[.@var{pageseq}] @opindex -p [=]@var{num}[.@var{pageseq}] @cindex first page printed @cindex page, first printed @cindex physical page number, and @samp{-p} @cindex absolute page number, and @samp{-p} Exactly analogous to @code{-l} (q.v.), but specifying the first page number to be printed (processed). @item -pp @var{first}-@var{last} @opindex -pp @var{first}-@var{last} @cindex page range @opindex -pp @var{range} Print pages @var{first} through @var{last}; equivalent to @samp{-p @var{first} -l @var{last}}, except that multiple @samp{-pp} options accumulate, unlike @samp{-p} and @samp{-l}. The @samp{-} separator can also be @samp{:}. @item -P @var{printer} @opindex -P @var{printer} @flindex config.ps Read the configuration file @file{config.@var{printer}} (@file{@var{printer}.cfg} on MS-DOS), which typically sets the output name (most likely @samp{o |lpr -P@var{printer}}), resolution, Metafont mode, and perhaps other printer-specific defaults. It works best to put sitewide defaults in the one master @samp{config.ps} file and only things that vary from printer to printer in the @samp{config.@var{printer}} files; @samp{config.ps} is read before @samp{config.@var{printer}}. A configuration file for eventual creation of Adobe PDF files is provided in @samp{config.pdf} and thus can be loaded with @samp{-Ppdf}. It will try to include Type 1 outline fonts into the PostScript file (@pxref{Hypertext caveats}). If no @samp{-P} or @samp{-o} is given, the environment variable @code{PRINTER} is checked. If that variable exists, and a corresponding @file{config.@var{printer}} (@file{@var{printer}.cfg} on MS-DOS) file exists, it is read. @xref{Configuration file searching}. @item -q* @opindex -q @cindex quiet operation @cindex silent operation @cindex warnings, suppressing Run quietly. Don't chatter about pages converted, etc.@:, and report no warnings (only errors) to standard error. @item -r* @opindex -r @cindex reverse pagination Output pages in reverse order. By default, page 1 is output first. @item -R @opindex -R @cindex security @cindex shell command execution, disabling @cindex absolute filenames, disabling @cindex @file{..}-relative filenames Run securely. @samp{-R2} disables both shell command execution in @code{\special} (via @samp{`}, @pxref{Dynamic creation of graphics}) and config files (via the @samp{E} option, @pxref{Configuration file commands}) and opening of any absolute or @file{..}-relative filenames. @samp{-R1}, the default, forbids shell escapes but allows absolute filenames. @samp{-R0} allows both. @item -s* @opindex -s @cindex save/restore, generating global Enclose the output in a global save/restore pair. This causes the file to not be truly conformant, and is thus not recommended, but is useful if you are driving a deficient printer directly and thus don't care too much about the portability of the output to other environments. @item -S @var{num} @opindex -S @var{num} Set the maximum number of pages in each `section'. This option is most commonly used with the @samp{-i} option; see its description above for more information. @item -t @var{papertype} @opindex -t @var{papertype} @cindex paper type @cindex media @cindex letter papertype @cindex legal papertype @cindex ledger papertype @cindex a4 papertype @cindex a3 papertype @cindex landscape papertype @cindex papersize special, and no @samp{-t} Set the paper type to @var{papertype}, usually defined in one of the configuration files, along with the appropriate PostScript code to select it (@pxref{Config file paper sizes}). @itemize @minus{} @item You can also specify a @var{papertype} of @samp{landscape}, which rotates a document by 90 degrees. @item To rotate a document whose paper type is not the default, you can use the @samp{-t} option twice, once for the paper type, and once for @samp{landscape}. @item In general, you should not use any @samp{-t} option when using a @samp{papersize} special, which some @LaTeX{} packages (e.g., @samp{hyperref}) insert. @item One exception is when using a nonstandard paper size that is not already defined in @file{config.ps}; in this case, you need to specify @samp{-t@tie{}unknown}. @item Another exception is when producing multi-page files for further processing; use @samp{-t@tie{}nopaper} to omit any paper size information in the output. (If you just have a single page document, you can use @samp{-E} to get pure EPSF output.) @end itemize @item -title @var{string} @opindex -title @var{str} @cindex title, specifying @cindex output title, specifying @cindex document title, specifying @findex %%Title Use @var{string} as the title in the generated PostScript (@code{%%Title}). If not specified, the default is the basename of the input file; for example, running @code{dvips /foo/bar.dvi} will have a @code{%%Title} of @samp{bar.dvi}. @item -T @var{hsize},@var{vsize} @opindex -T @var{hsize},@var{vsize} Set the paper size to (@var{hsize},@var{vsize}), a comma-separated pair of dimensions such as @samp{.1in,-.3cm} (@pxref{@samp{papersize} special}). It overrides any paper size special in the DVI file. Be careful, as the paper size will stick to a predefined size if there is one close enough. To disable this behavior, use @samp{-tunknown}. @item -u @var{psmapfile} @opindex -u @var{psmapfile} @cindex PostScript font alias file @cindex resident fonts, different in different printers Set @var{psmapfile} to be the file that dvips uses for looking up PostScript font aliases. If @var{psmapfile} begins with a @samp{+} character, then the rest of the name is used as the name of the map file, and the map file is appended to the list of map files (instead of replacing the list). In either case, if the name has no extension, then @samp{.map} is added at the end. @item -U* @opindex -U @cindex Xerox 4045 Disable a PostScript virtual memory-saving optimization that stores the character metric information in the same string that is used to store the bitmap information. This is only necessary when driving the Xerox 4045 PostScript interpreter, which has a bug that puts garbage on the bottom of each character. Not recommended unless you must drive this printer. @item -v @opindex -v Print the dvips version number and exit. @item -V* @opindex -V Download non-resident PostScript fonts as bitmaps. This requires use @pindex mtpk @pindex gsftopk @pindex pstopk of @code{mtpk} or @code{gsftopk} or @code{pstopk} or some combination thereof to generate the required bitmap fonts; these programs are supplied with Dvips. The bitmap must be put into @file{psfonts.map} as the downloadable file for that font. This is useful only for those fonts for which you do not have real outlines, being downloaded to printers that have no resident fonts, i.e., very rarely. @item -x @var{num} @opindex -x @var{num} @cindex magnification, overriding DVI Set the magnification ratio to @math{@var{num}/1000}. Overrides the magnification specified in the DVI file. Must be between 10 and 100000. It is recommended that you use standard magstep values (1095, 1200, 1440, 1728, 2074, 2488, 2986, and so on) to help reduce the total number of PK files generated. @var{num} may be a real number, not an integer, for increased precision. @item -X @var{num} @opindex -X @var{num} @cindex resolution Set the horizontal resolution in dots per inch to @var{num}. @item -y @var{num} @cindex magnification, vertical Set the magnification ratio to @math{@var{num}/1000} times the magnification specified in the DVI file. See @samp{-x} above. @item -Y @var{num} @opindex -Y @var{num} Set the vertical resolution in dots per inch to @var{num.} @cindex resolution @item -z* @opindex -z @r{for recognizing hyperdvi} @cindex hyperdvi extensions, enabling @cindex distillation, and @samp{-z} @cindex PDF files, option for @findex html @r{specials, and @samp{-z}} Pass @samp{html} hyperdvi specials through to the output for eventual distillation into PDF. This is not enabled by default to avoid including the header files unnecessarily, and use of temporary files in creating the output. @xref{Hypertext}. @item -Z* @opindex -Z @r{for compressing bitmap fonts} @cindex compressing bitmap fonts Compress bitmap fonts in the output file, thereby reducing the size of what gets downloaded. Especially useful at high resolutions or when very large fonts are used. May slow down printing, especially on early 68000-based PostScript printers. Generally recommend today, and can be enabled in the configuration file (@pxref{Configuration file commands}). @end table @node Environment variables @section Environment variables @cindex environment variables Dvips looks for many environment variables, to define search paths and other things. The path variables are read as needed, after all configuration files are read, so they override values in the configuration files. (Except for @code{TEXCONFIG}, which defines where the configuration files themselves are found.) @xref{Path specifications,,, kpathsea, Kpathsea}, for details of interpretation of path and other environment variables common to all Kpathsea-using programs. Only the environment variables specific to Dvips are mentioned here. @vtable @code @item DVIPSDEBUG @vindex KPATHSEA_DEBUG Write the absolute path names of any configuration or map files to standard output, for debugging. This isn't done by default because these files are read even before the banner is printed. For voluminous additional debugging, set the environment variable @env{KPATHSEA_DEBUG} to @samp{-1} (@pxref{Debugging,,,kpathsea,Kpathsea}). (If @env{KPATHSEA_DEBUG} is set to any value, it automatically turns on @env{DVIPSDEBUG}.) @item DVIPSFONTS Default path to search for all fonts. Overrides all the font path config file options and other environment variables (@pxref{Supported file formats,,, kpathsea, Kpathsea}). @item DVIPSHEADERS Default path to search for PostScript header files. Overrides the @samp{H} config file option (@pxref{Configuration file commands}). @item DVIPSMAKEPK @pindex mktexpk@r{, changing name} Overrides @samp{mktexpk} as the name of the program to invoke to create missing PK fonts. You can change the arguments passed to the @code{mktexpk} program with the @code{MAKETEXPK} environment variable; @pxref{MakeTeX script arguments,,, kpathsea, Kpathsea}. @item DVIPSRC Specifies the name of the startup file (@pxref{Configuration file searching}) which is read after @file{config.ps} but before any printer-specific configuration files. @item DVIPSSIZES @cindex last-resort font scaling, with @code{DVIPSSIZES} Last-resort sizes for scaling of unfound fonts. Overrides the @samp{R} definition in config files (@pxref{Configuration file commands}). @item PRINTER Determine the default printer configuration file. (Dvips itself does not use @code{PRINTER} to determine the output destination in any way.) @item TEXCONFIG @cindex configuration file path Path to search for Dvips' @file{config.@var{printer}} configuration files, including the base @file{config.ps}. Using this single environment variable, you can override everything else. (The printer-specific configuration files are called @file{@var{printer}.cfg} on MS-DOS, but @file{config.ps} is called by that name on all platforms.) @item TEXPICTS Path to search for included graphics files. Overrides the @samp{S} config file option (@pxref{Configuration file commands}). If not set, @code{TEXINPUTS} is looked for. @xref{Supported file formats,,, kpathsea, Kpathsea}. @end vtable @node Config files @section Dvips configuration files @cindex configuration files This section describes in detail the Dvips-specific @file{config.*} device configuration files (called @file{*.cfg} on MS-DOS), which override the @file{texmf.cnf} configuration files generic to Kpathsea which Dvips also reads (@pxref{Config files,,, kpathsea, Kpathsea}). For information about installing these files, including a prototype file you can copy, @pxref{config.ps installation}. @menu * Configuration file searching:: Where config.* files are searched for. * Configuration file commands:: What can go in a config.* file. @end menu @node Configuration file searching @subsection Configuration file searching @cindex configuration file searching @cindex searching config files, order of The Dvips program loads many different configuration files, so that parameters can be set globally across the system, on a per-device basis, or individually by each user. @enumerate @item @flindex config.ps@r{, searched for} Dvips first reads (if it exists) @file{config.ps}; it is searched for along the path for Dvips configuration files, as described in @ref{Supported file formats,,, kpathsea, Kpathsea}. @item @flindex .dvipsrc@r{, searched for} A user-specific startup file is loaded, so individual users can override any options set in the global file. The environment variable @code{DVIPSRC}, if defined, is used as the specification of the startup file. If this variable is undefined, Dvips uses a platform-specific default name. On Unix Dvips looks for the default startup file under the name @file{$HOME/.dvipsrc}, which is in the user's home directory. On MS-DOS and MS-Windows, where users generally don't have their private directories, the startup file is called @file{dvips.ini} and it is searched for along the path for Dvips configuration files (as described in @ref{Supported file formats,,, kpathsea, Kpathsea}.); users are expected to set this path as they see fit for their taste. @item @opindex -P@var{printer}@r{, and config file searching} The command line is read and parsed: if the @samp{-P@var{device}} option is encountered, at that point @file{config.@var{device}} is loaded. Thus, the printer configuration file can override anything in the site-wide or user configuration file, and it can also override options in the command line up to the point that the @samp{-P} option was encountered. (On MS-DOS, the printer configuration files are called @file{@var{device}.cfg}, since DOS doesn't allow more than 3 characters after the dot in filenames.) @item @vindex PRINTER@r{, and config file searching} If no @samp{-P} option was specified, and also the @samp{-o} and @samp{-f} command line options were not used, Dvips checks the environment variable @code{PRINTER}. If it exists, then @file{config.@var{$PRINTER}} (@file{@var{$PRINTER}.cfg} on MS-DOS) is loaded (if it exists). @end enumerate Because the @file{.dvipsrc} file is read before the printer-specific configuration files, individual users cannot override settings in the latter. On the other hand, the @code{TEXCONFIG} path can be set to anything, so the users can always define their own printer-specific configuration files to be found before the system's. A few command-line options are treated specially, in that they are not overridden by configuration files: @table @samp @item -D As well as setting the resolution, this unsets the mode, if the mode was previously set from a configuration file. If @file{config.$PRINTER} is read, however, any @samp{D} or @samp{M} lines from there will take effect. @item -mode This overrides any mode setting (@samp{M} line) in configuration files. @samp{-mode} does not affect the resolution. @item -o This overrides any output setting (@samp{o} line) in configuration files. @end table The purpose of these special cases is to (1) minimize the chance of having a mismatched mode and resolution (which @samp{mktexpk} cannot resolve), and (2) let command-line options override config files where possible. @node Configuration file commands @subsection Configuration file commands @cindex configuration file options @cindex Dvips configuration file options Most of the configuration file commands are similar to corresponding command line options, but there are a few exceptions. When they are the same, we omit the description here. As with command line options, many may be turned off by suffixing the letter with a zero (@samp{0}). @cindex comments, in configuration files @cindex continuation lines, not supported Within a configuration file, empty lines, and lines starting with a space, asterisk, equal sign, percent sign, or pound sign are ignored. There is no provision for continuation lines. @table @samp @item @@ @var{name hsize vsize} @opindex @@ @r{config command (define paper sizes)} Define paper sizes. @xref{Config file paper sizes}. @item a* @opindex a @r{config command (conserve memory)} Memory conservation. Same as @samp{-a}, @pxref{Option details}. @item b @var{#copies} @opindex b @r{config command (#copies)} Multiple copies. Same as @samp{-b}, @pxref{Option details}. @item bitmapfontenc @var{option} @opindex bitmapfontenc @r{config command (bitmap font encoding)} Turns bitmap font encoding to @samp{off}, @samp{on} (no warnings for missing bitmap font encodings), or @samp{strict} (with warnings for missing bitmap font encodings). @item c @var{filename} @opindex c @r{config command (include another config file)} Include @var{filename} as an additional configuration file, read immediately. @item D @var{dpi} @opindex D @r{config command (dpi)} Output resolution. Same as @samp{-D}, @pxref{Option details}. @item e @var{num} @opindex e @r{config command (maxdrift)} Max drift. Same as @samp{-e}, @pxref{Option details}. @item E @var{command} @opindex E @r{config command (shell escape)} @findex system @r{in config file} @cindex datestamp, in output @cindex shell escape, in config file Executes the command listed with @code{system}(3); can be used to get the current date into a header file for inclusion, for instance. Possibly dangerous; this may be disabled, in which case a warning will be printed if the option is used (and warnings are not suppressed). @item f* @itemx F @opindex f @r{config command (filter)} @opindex F @r{config command (filter)} Run as a filter. Same as @samp{-f}, @pxref{Option details}. @item G* @opindex G @r{config command (character shifting)} Shift low-numbered characters; obsolete. Same as @samp{-G}, @pxref{Option details}. @item h @var{header} @opindex h @r{config command (download additional header)} Prepend @var{header} to output. Same as @samp{h-}; that is, the config file @code{h} directive suppresses any inclusion of standard headers (@pxref{Option details}). @item H @var{path} @opindex H @r{config command (PostScript header path)} @cindex header path, defining @vindex DVIPSHEADERS@r{, overrides} H Use @var{path} to search for PostScript header files. The environment variable @code{DVIPSHEADERS} overrides this. @item i @var{n} @opindex i @r{config command (pages/section)} Make multiple output files. Same as @samp{-i -S @var{n}}, @pxref{Option details}. @item j* @opindex j @r{config command (partial font downloading)} Partially download Type 1 fonts. Same as @samp{-j}, @pxref{Option details}. @item K* @opindex K @r{config command (comment removal)} Remove comments from included PostScript files. Same as @samp{-K}, @pxref{Option details}. @item L* @opindex L @r{config command (last paper size wins)} If zero, the first paper size specified is effective, else the last. Same as @samp{-L}, @pxref{Option details}. @item landscaperotate @opindex landscaperotate @r{config command} Permit rotation of page content to match page size. Same as @samp{-landscaperotate}, @pxref{Option details}. @item m @var{num} @opindex m @r{config command (available memory)} @cindex memory available @cindex printer memory Declare @var{num} as the memory available for fonts and strings in the printer. The compile-time default is 180000, but this is typically overridden by @file{config.ps} or other configuration files. This value must be accurate if memory conservation and document splitting is to work correctly. To determine this value, send the following file to the printer: @example %! Hey, we're PostScript /Times-Roman findfont 30 scalefont setfont 144 432 moveto vmstatus exch sub 40 string cvs show pop showpage @end example @noindent The number printed by this file is the total memory free; it is usually best to tell Dvips that the printer has slightly less memory, because many programs download permanent macros that can reduce the memory in the printer. Some systems or printers can dynamically increase the memory available to a PostScript interpreter, in which case this file might return a ridiculously low number; for example, the NeXT computer and Ghostscript. In these cases, a value of, say, 10 million is likely fine. To go all out: If @var{num} is zero or negative, Dvips sets the available memory to a very large number (the maximum integer value in C), the idea being that output is not to a printer and thus no splitting of the output is desirable. The Dvips config file @file{config.maxmem} is provided to do this conveniently, namely with @samp{dvips -Pmaxmem}. @item M @var{mode} @opindex M @r{config command (mf mode)} Metafont mode. Same as @samp{-mode}, @pxref{Option details}. @item N* @opindex N @r{ config command (disable EPS)} Disable structured comments. Beware: This also turns off displaying page numbers or changing to specific page numbers in PostScript viewers. Same as @samp{-N}, @pxref{Option details}. @item o @var{name} @opindex o @r{config command (output destination)} @cindex output file, setting Send output to @var{name}. Same as @samp{-o}, @pxref{Option details}. In the file @file{config.foo}, a setting like this is probably appropriate: @example o |lpr -Pfoo @end example The MS-DOS version will emulate spooling to @code{lpr} by printing to the local printer device @file{PRN} if it doesn't find an executable program by that name in the current directory or along the @code{PATH}. @item O @var{xoff},@var{yoff} @opindex O @r{config command (page offsets)} Origin offset. Same as @samp{-O}, @pxref{Option details}. @item p @r{[+]}@var{name} @opindex p @r{config command (font aliases)} @cindex PostScript font alias file @cindex resident fonts, different in different printers @kindex +@var{psmapfile} Examine @var{name} for PostScript font aliases. Default is @file{psfonts.map}. This option allows you to specify different resident fonts that different printers may have. If @var{name} starts with a @samp{+} character, then the rest of the name (after any leading spaces) is used as an additional map file; thus, it is possible to have local map files pointed to by local configuration files that append to the global map file. This can be used for font families. @item P @var{path} @opindex P @r{config command (PK path)} @vindex PKFONTS@r{, overrides} P @vindex TEXPKS@r{, overrides} P @vindex GLYPHFONTS@r{, overrides} P @vindex TEXFONTS@r{, overrides} P Use @var{path} to search for bitmap PK font files is @var{path}. The @code{PKFONTS}, @code{TEXPKS}, @code{GLYPHFONTS}, and @code{TEXFONTS} environment variables override this. @xref{Supported file formats,,, kpathsea, Kpathsea}. @item q* @itemx Q @opindex q @r{config command (quiet)} @opindex Q @r{config command (quiet)} Run quietly. Same as @samp{-q}, @pxref{Option details}. @item r* @opindex r @r{config command (page reversal)} Page reversal. Same as @samp{-r}, @pxref{Option details}. @item R @var{num1 num2 @dots{}} @opindex R @r{config command (fallback resolution)} @cindex fallback resolutions @cindex default resolutions @cindex last-resort scaling, with @code{R} Define the list of default resolutions for PK fonts. If a font size actually used in a document is not available and cannot be created, Dvips will scale the font found at the closest of these resolutions to the requested size, using PostScript scaling. The resulting output may be ugly, and thus a warning is issued. To turn this last-resort scaling off, use a line with just the @samp{R} and no numbers. The given numbers must be sorted in increasing order; any number smaller than the preceding one is ignored. This is because it is better to scale a font up than down; scaling down can obliterate small features in the character shape. @vindex DVIPSSIZES@r{, overrides} R @vindex TEXSIZES@r{, overrides} R The environment and config file values @samp{DVIPSSIZES} or @samp{TEXSIZES} override this configuration file setting. @vindex default_texsizes @r{Make variable} If no @samp{R} settings or environment variables are specified, a list compiled in during installation is used. This default list is defined by the Makefile variable @samp{default_texsizes}, defined in the file @file{make/paths.make}. @item s* @opindex s @r{config command (global save/restore)} Output global save/restore. Same as @samp{-s}, @pxref{Option details}. @item S @var{path} @opindex S @r{config command (pict path)} @vindex TEXPICTS@r{, overrides} S @vindex TEXINPUTS@r{, overrides} S Use @var{path} to search for special illustrations (Encapsulated PostScript files or psfiles). The @code{TEXPICTS} and then @code{TEXINPUTS} environment variables override this. @item T @var{path} @opindex T @r{config command (TFM path)} @vindex TFMFONTS@r{, overrides} T @vindex TEXFONTS@r{, overrides} T Use @var{path} to search for TFM files. The @code{TFMFONTS} and then @code{TEXFONTS} environment variables overrides this. This path is used for resident fonts and fonts that can't otherwise be found. @item U* @opindex U @r{config command (Xerox 4045)} Work around bug in Xerox 4045 printer. Same as @samp{-U}, @pxref{Option details}. @item V @var{path} @opindex V @r{config command (vf path)} @cindex virtual font path @cindex device dependency, and virtual fonts Use @var{path} to search for virtual font files. This may be device-dependent if you use virtual fonts to simulate actual fonts on different devices. @item W @r{[@var{string}]} @opindex W @r{config command (emit warning)} @cindex warning messages, defining If @var{string} is supplied, write it to standard error after reading all the configuration files; with no @var{string}, cancel any previous @samp{W} message. This is useful in the default configuration file to remind users to specify a printer, for instance, or to notify users about special characteristics of a particular printer. @item X @var{num} @opindex X @r{config command (horizontal resolution)} Horizontal resolution. Same as @samp{-X} (@pxref{Option details}). @item Y @var{num} @opindex Y @r{config command (vertical resolution)} Vertical resolution. Same as @samp{-Y} (@pxref{Option details}). @item Z* @opindex Z @r{config command (compress fonts)} Compress bitmap fonts. Same as @samp{-Z} (@pxref{Option details}). @item z* @opindex z @r{config command (secure mode)} Disables execution of system commands, like @samp{-R} (@pxref{Option details}). If @samp{-R} is specified on the command line, that takes precedence. @end table @node Paper size and landscape @chapter Paper size and landscape orientation @cindex paper size, general Most @TeX{} documents at a particular site are designed to use the local standard paper size (letter size in the United States, A4 elsewhere). The Dvips program can be customized either sitewide or for a particular printer. @cindex landscape orientation, defined @cindex portrait orientation, defined On the other hand, plenty of documents are designed for other paper sizes. For instance, you may want to design a document that has the long edge of the paper horizontal. This can be useful when typesetting booklets, brochures, complex tables, or many other documents. This type of paper orientation is called @dfn{landscape} orientation (the default orientation is called @dfn{portrait}). Alternatively, a document might be designed for ledger or A3 paper. Since the intended paper size in these cases is a document design decision, not a printing decision, such information should be given in the @TeX{} file and not on the Dvips command line. For this reason, Dvips supports a @samp{papersize} special. It is hoped that this special will become standard over time for @TeX{} previewers and other printer drivers. Some @LaTeX{} packages, e.g., @samp{hyperref.sty}, write a @samp{papersize} special into the DVI file. In this case, you need not and should not attempt to override it manually. @menu * @samp{papersize} special:: Specifying the paper size in TeX. * Config file paper sizes:: Specifying printer- and site-specific sizes. * Paper trays:: Changing paper trays automatically. @end menu @node @samp{papersize} special @section @samp{papersize} special @findex papersize @r{special} The format of the @samp{papersize} special is @example \special@{papersize=@var{width},@var{height}@} @end example @noindent @var{width} is the horizontal size of the page, and @var{height} is the vertical size. The dimensions supported are the same as for @TeX{}; namely, in (inches), cm (centimeters), mm (millimeters), pt (points), sp (scaled points), bp (big points, the same as the default PostScript unit), pc (picas), dd (didot points), and cc (ciceros). @findex landscape@r{, as @code{\special}} For a US letter size landscape document, the @samp{papersize} would be: @example \special@{papersize=11in,8.5in@} @end example @noindent An alternate specification of @code{landscape}: @example \special@{landscape@} @end example @noindent This is supported for backward compatibility, but it is hoped that eventually the @samp{papersize} comment will dominate. Of course, such a @code{\special} only informs Dvips of the desired paper size; you must also adjust @code{\hsize} and @code{\vsize} in your @TeX{} document typeset to those dimensions. @findex unknown@r{, paper format for @samp{-t}} When using the @samp{papersize} special, you generally should not also specify @code{-t} on the command line (@pxref{Option details}). The exception is when using a nonstandard paper size that isn't predefined; in this case, use @code{-t@tie{}unknown}. The @samp{papersize} special must occur somewhere on the first page of the document. Some packages, notably @samp{hyperref}, insert this special. By default, if a DVI file contains multiple @samp{papersize} specials, the last one wins; this is also the behavior of the @code{dvipdfmx} driver. If the @code{-L0} command line option or @code{L0} config file command is specified, the first special wins---this was the behavior of Dvips prior to the 2017 release. @node Config file paper sizes @section Configuration file paper size command @cindex paper size configuration file command @cindex configuration file paper size command The @samp{@@} command in a configuration file sets the paper size defaults and options. The first @samp{@@} command defines the default paper size. It has three possible parameters: @example @@ @r{[}@var{name} @r{[}@var{hsize} @var{vsize}@r{]]} @end example If @samp{@@} is specified on a line by itself, with no parameters, it instructs Dvips to discard all previous paper size information (possibly from another configuration file). If three parameters are given, with the first parameter being a name and the second and third being a dimension (as in @samp{8.5in} or @samp{3.2cc}, just like in the @samp{papersize} special), then the option is interpreted as starting a new paper size description, where @var{name} is the name and @var{hsize} and @var{vsize} define the horizontal and vertical size of the sheet of paper, respectively. For example: @example @@ letterSize 8.5in 11in @end example If both @var{hsize} and @var{vsize} are zero (you must still specify units!)@: then any page size will match. If the @samp{@@} character is immediately followed by a @samp{+} sign, then the remainder of the line (after skipping any leading blanks) is treated as PostScript code to send to the printer, presumably to select that particular paper size: @example @@ letter 8.5in 11in @@+ %%BeginPaperSize: Letter @@+ letter @@+ %%EndPaperSize @end example After all that, if the first character of the line is an exclamation point, then the line is put in the initial comments section of the final output file; else, it is put in the setup section of the output file. For example: @example @@ legal 8.5in 14in @@+ ! %%DocumentPaperSizes: Legal @@+ %%BeginPaperSize: Legal @@+ legal @@+ %%EndPaperSize @end example When Dvips has a paper format name given on the command line, it looks for a match by the @var{name}; when it has a @samp{papersize} special, it looks for a match by dimensions. The best match found (from the paper size information in the configuration file) is used. The dimensions must match within 5bp. If nothing matches, a warning is printed and the first paper size with zero dimensions is used; this should be the @code{unknown} paper size definition mentioned below, resulting in the actual dimensions being used. @cindex landscaperotate configuration file command @cindex landscaperotate command line option In versions of Dvips prior to 2022.1, if the paper size specified did not match one of the defined paper sizes, Dvips considered rotated page content and rotated paper sizes for a match. This provided some automatic support for landscape mode on raw printers, but today it can be harmful when generating PDF. (Specifically, the @samp{/MediaBox} then ends up with rotated values, which is not expected by PDF viewers, e.g., when a document intentionally has a single page rotated.) Further, on all recent computer systems, this facility is typically provided instead by a print spooler that considers the bounding box of the document and inserts appropriate media selection commands as part of the print job. So, this automatic rotation is no longer done by default by Dvips. If you want to enable it, the @samp{-landscaperotate} command line option or @samp{landscaperotate} configuration file option can be used. @xref{Option details}. @cindex zero dimensions and setting paper size If your printer has a command to set a special paper size, then give dimensions of @samp{0in 0in}; the PostScript code that sets the paper size can refer to the dimensions the user requested as @samp{hsize} and @samp{vsize}; these will be macros defined in the PostScript that return the requested size in default PostScript units. Also, some printers want @samp{BeginPaperSize} comments and paper size setting commands; others (such as the NeXT) want @samp{PaperSize} comments and they will handle setting the paper size. So paper size entries should typically specify both. @findex unknown@r{, paper format for @samp{-t}} When using a paper size that is not already defined in @file{config.ps}, you probably want to say @samp{-t@tie{}unknown} on the command line; the @code{unknown} paper size definition in @file{config.ps} has the requisite PostScript incantation to set the PostScript page size, as just described. @findex nopaper@r{, paper format for @samp{-t}} If you want no paper size information in the output at all, use @samp{-t@tie{}nopaper}. This is useful with multi-page output that will be processed further. If you just have a single page document, you can use @samp{-E} to get pure EPSF output. @flindex mkdvipspapers The Perl 5 script @file{contrib/configs/mkdvipspapers} in the distribution directory may help in determining appropriate paper size definitions. @flindex config.ps @r{paper sizes} @findex letter @r{paper size} @findex a4 @r{paper size} Notwithstanding the above, the default @code{letter} and @code{a4} paper size definitions in @file{config.ps} execute the @code{setpagedevice} operator if it exists (it was defined in PostScript Level@tie{}2), or the @samp{letter} or @samp{a4} operator if they exist (they are nonstandard and thus perhaps cause failures on certain (unknown) printers). Not executing any page size definition at all confuses PostScript conversion programs such as @command{ps2pdf}, so we want to execute one if we can. @findex letterSize @r{paper size} @findex A4size @r{paper size} The @code{letterSize} and @code{A4Size} paper size definitions are now synonyms for @code{letter} and @code{a4}. @node Paper trays @section Paper trays @cindex paper trays @cindex dual paper trays @cindex multiple paper trays @cindex HP4Si printer and paper trays @findex bop-hook Some printers, such as the Hewlett-Packard HP4si, have multiple paper trays. You can set up Dvips to take advantage of this using the @code{bop-hook} PostScript variable (@pxref{PostScript hooks}). @cindex letterhead tray For example, suppose you have an alternate tray stocked with letterhead paper; the usual tray has the usual paper. You have a document where you want the first page printed on letterhead, and the remaining pages on the usual paper. You can create a header file, say @file{firstletterhead.PS}, with the following (PostScript) code (@code{bop-hook} is passed the current physical page number, which starts at zero): @example /bop-hook @{ dup 0 eq @{ @var{alternatetray} @} @{ @var{normaltray} @} ifelse @} def @end example @noindent where @var{alternatetray} and @var{normaltray} are the appropriate commands to select the paper trays. On the 4SI, @var{alternatetray} is @samp{statusdict begin 1 setpapertray end} and @var{normaltray} is @samp{statusdict begin 0 setpapertray end}. Then, include the file with either @itemize @bullet @item the @samp{-h} command-line option (@pxref{Option details}); or @item the @samp{h} config file option (@pxref{Configuration file commands}); or @item @samp{\special@{header=@var{file}@}} in your @TeX{} document (@pxref{Including headers from TeX,, Including headers from @TeX{}}). @end itemize @node Interaction with PostScript @chapter Interaction with PostScript @cindex interaction with PostScript @cindex PostScript interaction Dvips supports inclusion of PostScript figure files (e.g., Encapsulated PostScript), downloading other header files (e.g., fonts), including literal PostScript code, and hypertext. @menu * PostScript figures:: Including an Encapsulated PostScript figure. * Header files:: Downloading extra definitions. * Literal PS:: Writing literal PostScript code. * Hypertext:: Producing HyperPostScript to make PDF. @end menu @node PostScript figures @section PostScript figures Scaling and including PostScript graphics is a breeze---if the PostScript file is correctly formed. Even if it is not, however, the file can usually be accommodated with just a little more work. @menu * Bounding box:: The %%BoundingBox EPS comment. * \includegraphics:: The LaTeX \includegraphics macro. * EPSF macros:: Including the file in TeX. * psfile special:: The basic special. * Dynamic creation of graphics:: Handling compressed or generated figures. * Fonts in figures:: The %*Font comment. @end menu @node Bounding box @subsection The bounding box comment @cindex bounding box, comment for The most important feature of a good PostScript file from the standpoint of including it in another document is an accurate bounding box comment. Every well-formed PostScript file has a comment describing where on the page the graphic is located, and how big that graphic is. @cindex big points @cindex PostScript units @cindex bounding box, defined This information is given as the lower left and upper right corners of the box just enclosing the graphic, and is thus referred to as the @dfn{bounding box}. These coordinates are given in the default PostScript units (there are precisely 72 PostScript units to the inch, like @TeX{} big points) with respect to the lower left corner of the sheet of paper. @findex %%BoundingBox To see if a PostScript file has a bounding box comment, just look at the first few lines of the file. PostScript files are standard ASCII, so you can use any text editor to do this. If within the first few dozen lines there is a line like @example %%BoundingBox: 25 50 400 300 @end example @noindent (with any reasonable numbers), chances are very good that the file is Encapsulated PostScript and will work easily with Dvips. If the file contains instead a line like @findex atend@r{, bounding box specification} @findex (atend)@r{, bounding box specification} @example %%BoundingBox: (atend) @end example @noindent the file is still probably Encapsulated PostScript, but the bounding box is given at the end of the file. Dvips needs it at the beginning. You can move it with that same text editor, or a simple script. (The bounding box is given in this way when the program that generated the PostScript couldn't know the size in advance, or was too lazy to compute it.) @pindex bbfig @cindex bounding box, determining If the document lacks a @samp{%%BoundingBox:} altogether, you can determine one in a couple of ways. One is to use the @samp{bbfig} program distributed with Dvips in the @file{contrib} directory. This can usually find the correct bounding box automatically; it works best with Ghostscript. @vindex 612 792 @r{bounding box size} If the comment looks like this: @example %%BoundingBox: 0 0 612 792 @end example @noindent the graphic claims to take up an entire sheet of paper. This is usually a symptom of a bug in the program that generated it. The other is to do it yourself: print the file. Now, take a ruler, and make the following measurements (in PostScript units, so measure in inches and multiply by 72): From the left edge of the paper to the leftmost mark on the paper is @var{llx}, the first number. From the bottom edge of the paper to the bottommost mark on the paper is @var{lly}, the second number. From the left edge of the paper to the rightmost mark on the paper is @var{urx}, the third number. The fourth and final number, @var{ury}, is the distance from the bottom of the page to the uppermost mark on the paper. Once you have the numbers, add a comment of the following form as the second line of the document. (The first line should already be a line starting with the two characters @samp{%!}; if it is not, the file probably isn't PostScript.) @example %%BoundingBox: @var{llx} @var{lly} @var{urx} @var{ury} @end example @noindent Or, if you don't want to modify the file, you can simply write these numbers down in a convenient place and give them in your @TeX{} document when you import the graphic, as described in the next section. If the document does not have such a bounding box, or if the bounding box is given at the end of the document, or the bounding box is wrong, please complain to the authors of the software package that generated the file. @node \includegraphics @subsection The \includegraphics macro for @LaTeX{} @cindex \includegraphics @LaTeX{} macro @cindex macros for epsf inclusion Once the figure file has a bounding box comment (see the previous section) you are ready to import the graphic into a La@TeX{} document. For @LaTeX{}2e, you can use the epsf, graphics or graphicx packages, but the last is recommended---it has the most flexible syntax, and is briefly described here. Further information can be found in @file{grfguide} or @file{epslatex}, which should be included in your @LaTeX{} distribution in DVI, PDF, or other formats. (If you are still using La@TeX{} 2.09, use epsf.sty). Just put the following command into your preamble: @example \usepackage[dvips]@{graphicx@} @end example Depending on your system, a suitable driver setup may already be present, so that @LaTeX{} automatically produces DVI files suitable for Dvips. In this case you can leave out the @samp{[dvips]} parameter. Now, at the point you want to include a file @file{foo.eps}, enter a line such as: @example \includegraphics@{foo.eps@} @end example However, it is usually best to omit the file extension and only use @example \includegraphics@{foo@} @end example @noindent because then you can process the same LaTeX file with different @TeX{} engines or DVI converters if you also provide suitable graphics files for them, e.g., @file{foo.pdf} or @file{foo.png}. @cindex bounding box, supplying to @TeX{} The \includegraphics command has many options, specified in @samp{key=value} syntax, to allow you to resize, rotate or trim the included graphic---see @file{grfguide} or @file{epslatex}. If your file does not have a bounding box comment, you can supply the numbers as determined in the previous section, in the same order they would have been in a normal bounding box comment: @example \includegraphics[bb=100 100 500 500]@{foo.ps@} @end example @noindent Now, save your changes and run @LaTeX{} and Dvips; the output should have your graphic positioned at precisely the point you indicated, occupying the proper amount of space. PostScript graphics have their origin in the lower left corner. Therefore, in @TeX{}, a graphic will occupy a box that extends far above the line where it is put in, but has depth zero below it. Combining @samp{\includegraphics} with @samp{\parbox} commands or minipages can sometimes be confusing when this is not taken into account. @node EPSF macros @subsection Using the EPSF macros @cindex EPSF macros @cindex macros for epsf inclusion If you are using @LaTeX{}2e, use the @samp{graphics} or @samp{graphicx} package. @xref{\includegraphics}. If you are using plain @TeX{} or La@TeX{} 2.09, you need @file{epsf.tex} (for plain @TeX{}) and @file{epsf.sty} (for La@TeX{}). For plain @TeX{}, add a line like this near the top of your input file: @flindex epsf.tex @example \input epsf @end example @noindent @flindex epsf.sty If you are using @LaTeX{} 2.09, add the @samp{epsf} style option, as in: @example \documentstyle[12pt,epsf]@{article@} @end example @noindent In any case, the above only needs to be done once, no matter how many figures you plan to include. Now, at the point you want to include a file, enter a line such as: @example \epsffile@{foo.eps@} @end example @findex \leavevmode @cindex bounding box, supplying to @TeX{} If you are using @LaTeX{}, you may need to add @code{\leavevmode} immediately before the @code{\epsffile} command to get certain environments to work correctly. If your file does not have a bounding box comment, you can supply the numbers as determined in the previous section, in the same order they would have been in a normal bounding box comment: @example \epsffile[100 100 500 500]@{foo.ps@} @end example @noindent Now, save your changes and run @TeX{} and Dvips; the output should have your graphic positioned at precisely the point you indicated, occupying the proper amount of space. @findex \epsffile @r{macro} @cindex figures, natural size The @code{\epsffile} macro typesets the figure as a @TeX{} @code{\vbox} at the point of the page that the command is executed. By default, the graphic will have its `natural' width (namely, the width of its bounding box). The @TeX{} box will have depth zero and its natural height. By default, the graphic will be scaled by any DVI magnification in effect, just as is everything else in your document. See the next section for more information on scaling. @vindex \epsfverbosetrue @cindex verbose EPSF processing If you want @TeX{} to report the size of the figure as a message on your terminal when it processes each figure, give the command: @example \epsfverbosetrue @end example @menu * EPSF scaling:: * EPSF clipping:: @end menu @node EPSF scaling @subsubsection EPSF scaling @cindex scaling of figures @cindex figures, scaling Usually, you will want to scale an EPSF figure to some size appropriate for your document, since its natural size is determined by the creator of the EPS file. The best way to do this is to assign the desired size to the @TeX{} @code{\epsfxsize} or @code{\epsfysize} variables, whichever is more convenient for you. That is, put @vindex \epsfxsize @example \epsfxsize=@var{dimen} @end example @noindent right before the call to @code{\epsffile}. Then the width of the @TeX{} box will be @var{dimen} and its height will be scaled proportionately. Similarly, you can set the vertical size with @vindex \epsfysize @example \epsfysize=@var{dimen} @end example @noindent in which case the height will be set and the width scaled proportionally. If you set both, both will be honored, but the aspect ratio of the included graphic may necessarily be distorted, i.e., its contents stretched in one direction or the other. @findex \epsfsize You can resize graphics in a more general way by redefining the @code{\epsfsize} macro. @code{\epsffile} calls this with two parameters: the natural horizontal and vertical sizes of the PostScript graphic. @code{\epsfsize} must expand to the desired horizontal size, that is, the width of the @code{\vbox}. Schematically: @example \def\epsfsize#1#2@{@var{body}@} @end example Some useful definitions of @var{body}: @table @samp @item \epsfxsize This definition (the default) enables the default features listed above, by setting @code{\epsfxsize} to the same value it had before the macro was called. @item #1 Force the natural size by returning the first parameter (the original width). @item 0pt A special case, equivalent to @samp{#1}. @item 0.5#1 Scale to half the natural size. @item \hsize Scale to the current @code{\hsize}. (In @LaTeX{}, use @code{\textwidth} instead of @code{\hsize}.) @item \ifnum#1>\hsize\hsize\else#1\fi If the natural width is greater than the current @code{\hsize}, scale to @code{\hsize}, otherwise use the natural width. @end table @cindex DVI magnification @cindex magnification, DVI @vindex \magnification For compatibility with other PostScript drivers, it is possible to turn off the default scaling of included figures by the DVI magnification with the following @TeX{} command: @vindex /magscale @example \special@{! /magscale false def@} @end example @noindent Use of this command is not recommended because it will make the @code{\epsffile} graphics the ``wrong'' size if global magnification is being used, and it will cause any PostScript graphics to appear improperly scaled and out of position if a DVI to DVI program is used to scale or otherwise modify the document. @findex bop-hook DVI magnification is not applied to any output from code you write in @samp{bop-hook} or its ilk (@pxref{PostScript hooks}), @node EPSF clipping @subsubsection EPSF clipping @cindex clipping of EPSF @cindex bounding box, inaccurate @cindex text in figures, chopped off @cindex lines in figures, wrong width By default, clipping is disabled for included EPSF images. This is because clipping to the bounding box dimensions often cuts off a small portion of the figure, due to slightly inaccurate bounding box arguments. The problem might be subtle; lines around the boundary of the image might be half their intended width, or the tops or bottoms of some text annotations might be sliced off. If you want to turn clipping on, just use the command @example \epsfclipon @end example @noindent and to turn clipping back off, use @example \epsfclipoff @end example @node psfile special @subsection @samp{psfile} special @findex psfile @r{special} The basic special for file inclusion is as follows: @example \special@{psfile=@var{filename}.ps @r{[}@var{key}=@var{value}@r{]} @dots{} @} @end example @noindent This downloads the PostScript file @file{@var{filename}.ps} such that the current point will be the origin of the PostScript coordinate system. The optional @var{key}@t{=}@var{value} assignments allow you to specify transformations on the PostScript. The possible @var{key}s are: @table @samp @item hoffset @opindex hoffset @r{(@samp{psfile} special option)} The horizontal offset (default 0). @item voffset @opindex voffset @r{(@samp{psfile} special option)} The vertical offset (default 0). @item hsize @opindex hsize @r{(@samp{psfile} special option)} The horizontal clipping size (default 612). @item vsize @opindex vsize @r{(@samp{psfile} special option)} The vertical clipping size (default 792). @item hscale @opindex hscale @r{(@samp{psfile} special option)} The horizontal scaling factor, as a percentage (default 100). @item vscale @opindex vscale @r{(@samp{psfile} special option)} The vertical scaling factor, as a percentage (default 100). @item angle @opindex angle @r{(@samp{psfile} special option)} The rotation, in degrees (default 0). @item clip @opindex clip @r{(@samp{psfile} special option)} Enable clipping to the bounding box (default disabled). @item llx, lly, urx, ury @opindex llx @r{(@samp{psfile} special option)} @opindex lly @r{(@samp{psfile} special option)} @opindex urx @r{(@samp{psfile} special option)} @opindex ury @r{(@samp{psfile} special option)} Bounding box of the included image, just as in a @code{%%BoundingBox} comment. Values are in big points, and may be fractional. @item rhi, rwi @opindex rhi @r{(@samp{psfile} special option)} @opindex rwi @r{(@samp{psfile} special option)} Desired width and height of the resulting figure in the output, in tenths of big points (720 to the inch); may be fractional. If both @code{rwi} and @code{rhi} are nonzero, the picture is scaled, possibly losing aspect ratio. If only one of @code{rwi} and @code{rhi} is nonzero, the picture is scaled, preserving aspect ratio. @end table The offsets and sizes are given in PostScript units (big points). Thus, for example: @example \special@{psfile=foo.ps hoffset=72 hscale=90 vscale=90@} @end example @noindent will shift the graphics produced by file @file{foo.ps} right by one inch and will draw it at 0.9 times normal size. Offsets are given relative to the point of the special command, and are unaffected by scaling or rotation. Rotation is counterclockwise about the origin. The order of operations is to rotate the figure, scale it, then offset it. For compatibility with older PostScript drivers, it is possible to change the units that @samp{hscale} and @samp{vscale} are given in. This can be done by redefining @samp{@@scaleunit} @vindex scaleunit in @samp{SDict} @vindex SDict by a @TeX{} command such as @example \special@{! /@@scaleunit 1 def@} @end example @noindent The @samp{@@scaleunit} variable, which is by default 100, is what @samp{hscale} and @samp{vscale} are divided by to yield an absolute scale factor. @node Dynamic creation of graphics @subsection Dynamic creation of PostScript graphics files @cindex dynamic creation of graphics @cindex compressed PostScript @cindex uncompressing PostScript PostScript is an excellent page description language---but it does tend to be rather verbose. Compressing PostScript graphics files can reduce them by factor of five or more. For this reason, if the name of an included PostScript file ends with @file{.Z} or @file{.gz}, Dvips automatically runs @samp{gzip -d}. For example: @example \epsffile[72 72 540 720]@{foo.ps.gz@} @end example @noindent Since the results of such a command are not accessible to @TeX{}, if you use this facility with the @file{epsf} macros, you need to supply the bounding box parameter yourself, as shown. More generally, if the filename parameter to one of the graphics inclusion techniques starts with a left quote (@samp{`}), the parameter is instead interpreted as a command to execute that will send the actual file to standard output. For example: @example \special@{psfile="`gnuplot foo"@} @end example @noindent @flindex gnuplot to include the file @file{foo}. Of course, the command to be executed can be anything, including using a file conversion utility such as @file{tek2ps} or whatever is appropriate. This feature can be disabled with the @samp{-R} command-line option or @samp{R} configuration option. @node Fonts in figures @subsection Fonts in figures @cindex figures and fonts @cindex fonts, in PostScript figures @findex %*Font You can use any font available to @TeX{} and Dvips within a graphics file by putting a @code{%*Font:} line in the leading commentary of the file. Schematically, this looks like: @example %*Font: @var{tfmname} @var{scaledbp} @var{designbp} @var{hex-start}:@var{hex-bitstring} @end example Here is the meaning of each of these elements: @table @var @item tfmname The @TeX{} TFM filename, e.g., @file{cmr10}. You can give the same @var{tfmname} on more than one @samp{%*Font} line; this is useful when the number of characters from the font used needs a longer @var{hex-bitstring} (see item below) than conveniently fits on one line. @item scaledbp The size at which you are using the font, in PostScript points (@TeX{} big points). 72@dmn{bp} = 72.27@dmn{pt} = 1@dmn{in}. @item designbp The designsize of the font, again in PostScript points. This should match the value in the TFM file @var{tfmname}. Thus, for @file{cmr10}, it should be @samp{9.96265}. @item hex-start The character code of the first character used from the font, specified as two ASCII hexadecimal characters, e.g., @samp{4b} or @samp{4B} for @samp{K}. @item hex-bitstring An arbitrary number of ASCII hexadecimal digits specifying which characters following (and including) @var{hex-start} are used. This is treated as a bitmap. For example, if your figure used the single letter @samp{K}, you would use @samp{4b:8} for @var{hex-start} and @var{hex-bitstring}. If it used @samp{KLMNP}, you would use @samp{4b:f4}. @end table MetaPost's output figures contain lines like this for bitmap fonts used in a MetaPost label (@pxref{MetaPost,,, web2c, Web2c}). @node Header files @section PostScript header files @cindex header files, defined @cindex PostScript header files @dfn{Header files} are bits of PostScript included in the output file; generally they provide support for special features, rather than producing any printed output themselves. You can explicitly request downloading header files if necessary for some figure, or to achieve some special effect. @vindex psheaderdir @flindex .pro @r{prologue files} @flindex .lpro @r{long prologue files} Dvips includes some headers on its own initiative, to implement features such as PostScript font reencoding, bitmap font downloading, handling of @code{\special}'s, and so on. These standard headers are the @file{.pro} files (for ``prologue'') in the installation directory @samp{$(psheaderdir)}; they are created from the @file{.lpro} (``long prologue'') files in the distribution by stripping comments, squeezing blank lines, etc., for maximum efficiency. If you want to peruse one of the standard header files, read the @file{.lpro} version. @vindex userdict@r{, and dictionary files} @cindex dictionary, @code{userdict} The PostScript dictionary stack will be at the @samp{userdict} level when header files are included. @menu * Including headers from TeX:: * Including headers from the command line:: * Headers and memory usage:: @end menu @node Including headers from TeX @subsection Including headers from @TeX{} @cindex including headers in @TeX{} @findex header=@var{file} \special @cindex @TeX{}, including headers in @cindex headers, including in @TeX{} In order to get a particular graphic file to work, a certain font or header file might need to be sent first. The Dvips program provides support for this with the @samp{header} @code{\special}. For instance, to ensure that @file{foo.ps} gets downloaded: @example \special@{header=foo.ps@} @end example @cindex fonts, as header files As another example, if you have some PostScript code that uses a PostScript font not built into your printer, you must download it to the printer. If the font isn't used elsewhere in the document, Dvips can't know you've used it, so you must include it in the same way, as in: @example \special@{header=putr.pfa@} @end example @noindent to include the font definition file for Adobe Utopia Roman. The @code{header} also special allows for specifying some additional code that should be inserted into the PostScript document before and after the file itself, as follows: @example \special@{header=@{foo.ps@} pre=@{pre code@} post=@{post code@}@} @end example @cindex before header, inserting code @cindex after header, inserting code @findex pre @r{code before headers} @findex post @r{code after headers} This will insert @code{pre code} just before @file{foo.ps} and @code{post code} just after. It is required to use the (balanced) braces in @emph{all} of the arguments, including the @code{header}, when using this extended syntax. This allows, for instance, dynamic headers, where some of the content depends on settings from the user in (La)@TeX{}. Another application is the inclusion of graphics inside the PostScript header, so that they can be reused throughout the document, as with logs. That avoids including the same graphic several times. This is implemented in the @file{graphics/graphicx-psmin} package. This extended syntax has one additional feature. When Dvips finds the extended syntax, it will also look in the installed @file{tex/} tree(s) for the header file (@file{foo.ps} in our example), and not only in the current directory and dvips tree as the original syntax does. This is because common graphics may well come with packages which are installed in the @file{tex/} tree. @node Including headers from the command line @subsection Including headers from the command line @cindex including headers from the command line @cindex command line, including headers from @cindex headers, including from the command line You can include headers when you run Dvips, as well as from your document (see the previous section). To do this, run Dvips with the option @samp{-P @var{header}}; this will read the file @file{config.@var{header}}, which in turn can specify a header file to be downloaded with the @samp{h} option. @xref{Configuration file commands}. These files are called @file{@var{header}.cfg} on MS-DOS. @cindex duplex printers @cindex simplex mode on duplex printers @cindex screen frequencies, setting You can arrange for the same file to serve as a @samp{-P} config file and the downloadable header file, by starting the lines of PostScript code with a space, leaving only the @samp{h} line and any comments starting in the first column. As an example, see @file{contrib/volker/config.*} (@file{contrib/volker/*.cfg} on MS-DOS). (These files also perform useful functions: controlling duplex/simplex mode on duplex printers, and setting various screen frequencies; @file{contrib/volker/README} explains further.) @node Headers and memory usage @subsection Headers and memory usage @cindex headers and memory usage @cindex memory usage, and headers @cindex sections of output file, and memory @cindex output file, sectioning of Dvips tries to avoid overflowing the printer's memory by splitting the output files into ``sections'' (see the @samp{-i} option in @ref{Option details}). Therefore, for all header files, Dvips debits the printer VM budget by some value. If the header file has, in its leading commentary a line of the form @findex VMusage @findex %%VMusage @example %%VMusage: @var{min} @var{max} @end example @noindent then @var{max} is used. If there is no @code{%%VMusage} line, then the size (in bytes) of the header file is used as an approximation. If you want a file to be ignored in the sectioning calculations, use @samp{%%VMusage: 0 0}. Illustrations (figure files) are also checked for @code{%%VMusage} line. Therefore, if your document uses very large fonts or very large included figures, Dvips might take it upon itself to split the output into unwanted sections. If this causes problems, the simplest solution is to use @samp{dvips -Pmaxmem}, which reads the Dvips file @file{config.maxmem}, which sets Dvips's idea of the memory available to a very large number. (See the @samp{m} item in @ref{Configuration file commands}.) @node Literal PS @section Literal PostScript @cindex literal PostScript, using @cindex PostScript code, literal You can include literal PostScript code in your document in several ways. @menu * " special:: To include inline PostScript code. * ps special:: Inline PostScript without save/restore. * Literal headers:: Literal PostScript for the whole document. * PostScript hooks:: Specifying code to run in the PS interpreter. * Literal examples:: Neat example. @end menu @node " special @subsection @code{"} special: Literal PostScript @findex " @r{special (literal PostScript)} For simple graphics, or just for experimentation, literal PostScript code can be included. Simply use a @code{\special} beginning with a double quote character @samp{"}; there is no matching closing @samp{"}. For instance, the following (simple) graphic: @iftex @tex \vskip\baselineskip \vbox to 100bp{\vss % a bp is the same as a PostScript unit \special{" newpath 0 0 moveto 100 100 lineto 394 0 lineto closepath gsave 0.8 setgray fill grestore stroke}} @end tex @end iftex @ifinfo [ picture of a grey triangle ] @end ifinfo @noindent was created by typing: @example \vbox to 100bp@{\vss % a bp is the same as a PostScript unit \special@{" newpath 0 0 moveto 100 100 lineto 394 0 lineto closepath gsave 0.8 setgray fill grestore stroke@}@} @end example You are responsible for leaving space for such literal graphics, as with the @code{\vbox} above. @node ps special @subsection @samp{ps} special @findex ps @r{special} @cindex save/restore, and specials Generally, Dvips encloses specials in a PostScript save/restore pair, guaranteeing that the special will have no effect on the rest of the document. The @samp{ps} special, however, allows you to insert literal PostScript instructions without this protective shield; you should understand what you're doing (and you shouldn't change the PostScript graphics state unless you are willing to take the consequences). This command can take many forms because it has had a torturous history; any of the following will work: @example \special@{ps:@var{text}@} \special@{ps::@var{text}@} \special@{ps::[begin]@var{text}@} \special@{ps::[end]@var{text}@} \special@{ps::[nobreak]@var{text}@} @end example @noindent (with longer forms taking precedence over shorter forms, when they are present). @samp{ps::} and @samp{ps::[end]} do no positioning, so they can be used to continue PostScript literals started with @samp{ps:} or @samp{ps::[begin]}. Literal PostScript instructions after @samp{ps::[nobreak]} are @emph{not} broken into lines. This feature may be used to include PostScript comments, for example. @findex plotfile@r{, @samp{ps} subspecial} In addition, the variant @example \special@{ps: plotfile @var{filename}@} @end example @noindent @flindex rotate.tex inserts the contents of @var{filename} verbatim into the output (except for omitting lines that begin with %). An example of the proper use of literal specials can be found in the file @file{rotate.tex}, which makes it easy to typeset text turned in multiples of 90 degrees. @node Literal headers @subsection Literal headers: @samp{!} @code{\special} @cindex literal headers @vindex SDict @r{dictionary} @findex ! @r{special (literal PS header)} @cindex dictionary, @code{SDict} You can download literal PostScript header code in your @TeX{} document, for use with (for example) literal graphics code that you include later. The text of a @code{\special} beginning with an @samp{!} is copied into the output file. A dictionary @code{SDict} will be current when this code is executed; Dvips arranges for @code{SDict} to be first on the dictionary stack when any PostScript graphic is included, whether literally (the @samp{"} special) or through macros (e.g., @file{epsf.tex}). For example: @example \special@{! /reset @{ 0 0 moveto@} def@} @end example @node PostScript hooks @subsection PostScript hooks @cindex PostScript hooks Besides including literal PostScript at a particular place in your document (as described in the previous section), you can also arrange to execute arbitrary PostScript code at particular times while the PostScript is printing. @findex bop-hook @findex eop-hook @findex start-hook @findex end-hook If any of the PostScript names @code{bop-hook}, @code{eop-hook}, @code{start-hook}, or @code{end-hook} are defined in @code{userdict}, they will be executed at the beginning of a page, end of a page, start of the document, and end of a document, respectively. @cindex draft copies @cindex dated output When these macros are executed, the default PostScript coordinate system and origin is in effect. Such macros can be defined in headers added by the @samp{-h} option or the @samp{header=} special, and might be useful for writing, for instance, `DRAFT' across the entire page, or, with the aid of a shell script, dating the document. These macros are executed outside of the save/restore context of the individual pages, so it is possible for them to accumulate information, but if a document must be divided into sections because of memory constraints, such added information will be lost across section breaks. @cindex physical page number, and @code{bop-hook} The single argument to @code{bop-hook} is the physical page number; the first page gets zero, the second one, etc. @code{bop-hook} must leave this number on the stack. None of the other hooks are passed arguments. As an example of what can be done, the following special will write a light grey `DRAFT' across each page in the document: @example \special@{!userdict begin /bop-hook@{gsave 200 30 translate 65 rotate /Times-Roman findfont 216 scalefont setfont 0 0 moveto 0.7 setgray (DRAFT) show grestore@}def end@} @end example @findex %%Page@r{, and multi-page information} Using @code{bop-hook} or @code{eop-hook} to preserve information across pages breaks compliance with the Adobe document structuring conventions, so if you use any such tricks, you may also want to use the @samp{-N} option to turn off structured comments (such as @samp{%%Page}). Otherwise, programs that read your file will assume its pages are independent. @node Literal examples @subsection Literal examples @cindex literal PostScript, examples @cindex examples of literal PostScript To finish off this section, the following examples of literal PostScript are presented without explanation: @example \def\rotninety@{\special@{ps:currentpoint currentpoint translate 90 rotate neg exch neg exch translate@}@}\font\huge=cmbx10 at 14.4truept \setbox0=\hbox to0pt@{\huge A\hss@}\vskip16truept\centerline@{\copy0 \special@{ps:gsave@}\rotninety\copy0\rotninety\copy0\rotninety \box0\special@{ps:grestore@}@}\vskip16truept @end example @iftex @tex \def\rotninety{\special{ps:currentpoint currentpoint translate 90 rotate neg exch neg exch translate}} \font\huge=cmbx10 at 14.4truept \setbox0=\hbox to0pt {\huge A\hss} \vskip16truept \centerline{\copy0\special{ps:gsave} \rotninety\copy0\rotninety\copy0\rotninety \box0\special{ps:grestore}} \vskip16truept @end tex @end iftex @ifinfo [ There are 4 @samp{A} characters, each rotated 90 degrees about a common center point ] @end ifinfo @example \vbox to 2truein@{\special@{ps:gsave 0.3 setgray@}\hrule height 2in width\hsize\vskip-2in\special@{ps:grestore@}\font\big=cminch\big \vss\special@{ps:gsave 1 setgray@}\vbox to 0pt@{\vskip2pt \line@{\hss\hskip4pt NEAT\hss@}\vss@}\special@{ps:0 setgray@}% \hbox@{\raise2pt\line@{\hss NEAT\hss@}\special@{ps:grestore@}@}\vss@} @end example @iftex @tex \smallskip \vbox to 2truein{\special{ps:gsave 0.3 setgray}\hrule height 2in width\hsize\vskip-2in\special{ps:grestore}\font\big=cminch\big \vss\special{ps:gsave 1 setgray}\vbox to 0pt{\vskip2pt \line{\hss\hskip4pt NEAT\hss}\vss}\special{ps:0 setgray}% \hbox{\raise2pt\line{\hss NEAT\hss}\special{ps:grestore}}\vss} @end tex @end iftex @ifinfo [ There is a big gray box with the word @samp{NEAT} inside in big letters ] @end ifinfo @findex \rotninety @findex gsave@r{/}grestore@r{, and literal PS} @findex save@r{/}restore@r{, and literal PS} Some caveats are in order, however. Make sure that each @code{gsave} is matched with a @code{grestore} on the same page. Do not use @code{save} and @code{restore}; they can interact with the PostScript generated by Dvips if care is not taken. Try to understand what the above macros are doing before writing your own. The @code{\rotninety} macro especially has a useful trick that appears again and again. @node Hypertext @section Hyper@TeX{}t @cindex hypertext support @opindex -z @findex html @r{specials} @findex pdfmark Dvips has support for producing hypertext PostScript documents. If you specify the @samp{-z} option, the @file{html:} specials described below will be converted into @samp{pdfmark} PostScript operators to specify links. Without @samp{-z}, @file{html:} specials are ignored. @cindex distiller, for PDF files @cindex PDF files, making The resulting PostScript can then be processed by a distiller program to make a PDF file. (It can still be handled by ordinary PostScript interpreters as well.) Various versions of both PC and Unix distillers are supported; Ghostscript includes limited distiller support (@pxref{Ghostscript installation}). By far the most common @LaTeX{} package used to create hyperlinked output is @code{hyperref} (@url{https://ctan.org/pkg/hyperref}). For plain @TeX{}, the Eplain package has some hyperlink support (@url{https://tug.org/eplain}). @cindex Doyle, Mark @cindex Bhattacharya, Tanmoy @pindex dvihps@r{, hyperdvi to PostScript} This hypertext support (and original form of the documentation) was written by Mark Doyle and Tanmoy Bhattacharya as the @samp{dvihps} program. @menu * Hypertext caveats:: Font quality, missing character psi. * Hypertext specials:: The details on the specials. @end menu @node Hypertext caveats @subsection Hypertext caveats @cindex hypertext caveats @cindex Computer Modern in PostScript @cindex hypertext and bitmap fonts @cindex hypertext caveats @cindex embedding Type 1 fonts @cindex PDF files, font quality If you intend to go all the way to PDF, you may want to use the standard 35 PostScript fonts exclusively, since other fonts are embedded as bitmaps by default. The Adobe PDF readers are extremely slow when dealing with bitmap fonts and the results look terrible on the screen. Printouts will probably look fine, but may not take full advantage of a high-resolution printer. Alternatively, you can have your fonts embedded as Type 1 scalable outlines. The resulting PostScript files may be larger, but can be effectively rasterized at any resolution. They can also be converted to PDF files that can be used effectively at any screen or printer resolution. To get the TeX fonts embedded in the PostScript file as Type 1 fonts, add @samp{-Ppdf} to the dvips command line switches. The printout for a run should look something like this: @smallexample dvips report -Ppdf -o report.ps This is dvips(k) 5.86 Copyright 1999 Radical Eye Software (www.radicaleye.com) ' TeX output 2001.06.15:0837' -> report.ps . [1] [2] [3] [4] @end smallexample An entry like "" indicates success: dvips found the Computer Modern Roman 10 point font in a PostScript Font Binary file, translated it to an ASCII encoding, and embedded it. You can confirm this by examining the PostScript output file, looking for the section starting @code{%%BeginFont: CMR10} followed by an entry @code{/FontType 1 def}. The @samp{-Ppdf} option requires that the relevant outline (@file{.pfa} or @file{.pfb}) files be installed (@pxref{Font concepts}). For example, the @file{cmr10} file might be in @file{/usr/share/texmf/fonts/type1/bluesky/cm/cmr10.pfb}. Your TeX distribution may make those fonts available in a separate optional package (e.g., @code{tetex-extra} in Debian). Failing that, commercial versions of the Computer Modern fonts are available from Blue Sky; public domain versions, in particular, the lm and cm-super font families, are available from CTAN and in @TeX{} distributions. You can convert a PostScript file to PDF using @code{distill}, which comes with Adobe Acrobat, or @code{ps2pdf}, which comes with Ghostscript. The @code{ps2pdf} that comes with @code{Ghostscript} version 6.0 or earlier will not embed Type 1 fonts. Current recommendations are GNU Ghostscript 6.51 or Aladdin Ghostscript 7.0. You can check the fonts in a PDF file with Acrobat Reader by selecting the menu entries @samp{File|Document Info|Fonts}. @cindex psi character missing @cindex trailing spaces, dropped @cindex spaces, dropped trailing Also, the Adobe distillers prior to 2.1 drop trailing space characters (character code 32) from strings. Unfortunately, the PostScript fonts use this character code for characters other than space (notably the Greek letter psi in the @code{Symbol} font), and so these characters are dropped. This bug is fixed in version 2.1. If you can't upgrade, one workaround is to change all the trailing blanks in strings to a character code that isn't in the font. This works because the default behavior is to substitute a blank for a missing character, i.e., the distiller is fooled into substituting the right character. For instance, with the Blue Sky fonts, you can globally replace @samp{ )} with @samp{\200)} (with @code{sed}, for example) and get the desired result. With the public domain fonts, you will probably have to use a character code in the range 128 to 191 since these fonts duplicate the first 32 characters starting at 192 to avoid MS-DOS problems. For more information on the use of TeX to produce PDF files, see the article ``Creating quality Adobe PDF files from @TeX{} with DVIPS'' by Kendall Whitehouse of Adobe. Adobe seems not to offer the article any more, but copies are available elsewhere: @display @url{http://www.math.hawaii.edu/~ralph/MathOnWeb/TeXPDF.html} @url{http://www.utdallas.edu/~cantrell/online/543e.html} @end display @node Hypertext specials @subsection Hypertext specials @cindex hypertext specials @cindex specials, hypertext @cindex Smith, Arthur Current support for the World Wide Web in the @TeX{} system does not involve modifying @TeX{} itself. We need only define some specials; Arthur Smith (@email{apsmith@@aps.org}), Tanmoy Bhattacharya, and Paul Ginsparg originally proposed and implemented the following: @example html: html: html: html: html: @end example Like all @TeX{} @code{\special}'s, these produce no visible output, and are uninterpreted by @TeX{} itself. They are instructions to DVI processors only. @cindex uniform resource locator @cindex extended URL @cindex URL, extended for @TeX{} @cindex Murphy, Tim Here, @var{xurl} is a standard WWW uniform resource locator (URL), possibly extended with a @samp{#@var{type}.@var{string}} construct, where @var{type} is @samp{page}, @samp{section}, @samp{equation}, @samp{reference} (for bibliographic references), @samp{figure}, @samp{table}, etc. For example, @smallexample \special@{html:@} @end smallexample @noindent is a link to equation (1.1) in an example document by Tim Murphy. @cindex URL, definition See the URL @url{http://www.w3.org/hypertext/WWW/Addressing/Addressing.html} for a precise description of base URL's. Descriptions of the @code{\special}'s: @ftable @samp @item href @cindex links, hypertext Creates links in your @TeX{} document. For example: @example \special@{html:@}\TeX\ Users Group\special@{html:@} @end example @noindent The user will be able to click on the text `@TeX{} Users Group' while running Xdvi and get to the TUG home page. (By the way, this is for illustration. In practice, you most likely want to use macros to insert the @code{\special} commands; reference above.) @item name @cindex Anderson, Laurie Defines URL targets in your @TeX{} documents, so links can be resolved. For example: @example \special@{html:@}Paradise\special@{html:@} is exactly where you are right now. @end example This will resolve an @samp{href="#paradise"}. You'll also have to change the catcode of @samp{#}, etc. It's usually easiest to use existing macro packages which take care of all the details, such as @file{hyperref} for @LaTeX{}. The @url{http://arxiv.org/hypertex/, HyperTeX FAQ} has more information. @item img @flindex mailcap @r{and hypertext} Links to an arbitrary external file. Interactively, a viewer is spawned to read the file according to the file extension and your @file{mailcap} file (see the Xdvi documentation). @item base Defines a base URL that is prepended to all the @code{name} targets. Typically unnecessary, as the name of the DVI file being read is used by default. @end ftable The @samp{img} and @samp{base} tags are not yet implemented in Dvips or the NeXTSTEP DVI viewer. @node PostScript fonts @chapter PostScript fonts @cindex PostScript fonts Dvips supports the use of PostScript fonts in @TeX{} documents. To use a PostScript font conveniently, you need to prepare a corresponding virtual font; the program Afm2tfm, supplied with Dvips, helps with that. All the necessary support for the standard 35 PostScript fonts (@samp{AvantGarde-Book} through @samp{ZapfDingbats}), plus other freely or commonly available PostScript fonts is available along with Dvips. To use these fonts, you need do nothing beyond what is mentioned in the installation procedure (@pxref{Installation}). This chapter is therefore relevant only if you are installing new PostScript fonts not supplied with Dvips. (Or if you're curious.) @menu * Font concepts:: Metrics, glyphs, virtual fonts, and encodings. * Making a font available:: Installing and using a PostScript font. * Invoking afm2tfm:: Creating TFM and AFM files for a virtual font. * psfonts.map:: Defining available PostScript fonts. @end menu @node Font concepts @section Font concepts @cindex font concepts The information needed to typeset using a particular font is contained in two files: a @dfn{metric file} that contains shape-independent information and a @dfn{glyph file} that contains the actual shapes of the font's characters. A @dfn{virtual font} is an optional additional file that can specify special ways to construct the characters. @TeX{} itself (or @LaTeX{}) look only at the metric file, but DVI drivers such as Dvips look at all three of these files. An @dfn{encoding file} defines the correspondence between the code numbers of the characters in a font and their descriptive names. Two encoding files used together can describe a reencoding that rearranges, i.e., renumbers, the characters of a font. @menu * Metric files:: Shape-independent font information. * Glyph files:: Character shapes. * Virtual fonts:: Constructing one font from others. * Encodings:: Character codes and character names. * Bitmap font encodings:: Encodings for bitmapped fonts. * PostScript typesetting:: How PostScript typesets a character. @end menu @node Metric files @subsection Metric files @cindex metric files A @dfn{metric file} describes properties of the font that are independent of what the characters actually look like. Aside from general information about the font itself, a metric file has two kinds of information: information about individual characters, organized by character code, and information about sequences of characters. The per-character information specifies the width, height, depth, and italic correction of each character in the font. Any might be zero. @cindex kerning, defined @cindex ligature, defined In addition to information on individual characters, the metric file specifies @dfn{kerning}, i.e., adding or removing space between particular character pairs. It further specifies @dfn{ligature} information: when a sequence of input characters should be typeset as a single (presumably different) ``ligature'' character. For example, it's traditional for the input @samp{fi} to be typeset as `fi', not as `@r{f}@r{i}' (with the dot of the `i' colliding with `f'). (In English, the only common ligatures are fi, fl, ff, ffi, and ffl.) Different typesetting systems use different metric file formats: @itemize @bullet @item @cindex afm files @flindex .afm @r{Adobe metric files} Each PostScript font has an @dfn{Adobe font metrics} (@samp{.afm}) file. These files are plain text, so you can inspect them easily. You can get AFM files for Adobe's fonts from @url{ftp://ftp.adobe.com/pub/adobe/Fonts/AFMs}. @item @cindex tfm files @flindex .tfm @r{@TeX{} font metric files} @TeX{} uses @dfn{@TeX{} font metrics} (@samp{.tfm}) files. When you say @samp{\font = @var{font}} in your @TeX{} document, @TeX{} reads a file named @samp{@var{font}.tfm}. (Well, except for the @file{texfonts.map} feature; @pxref{Fontmap,,, kpathsea, Kpathsea}). @TeX{} can then calculate the space occupied by characters from the font when typesetting. In addition, the DVI drivers you use to print or view the DVI file produced by @TeX{} may need to look at the TFM file. @cindex property list files @pindex tftopl @pindex pltotf @flindex .pl @r{property list files} TFM files are binary (and hence are typically much smaller than AFM files). You can use the @code{tftopl} program (@pxref{tftopl invocation,,, web2c, Web2c}) that comes with @TeX{} to transform a TFM file into a human-readable ``property list'' (@samp{.pl}) file. You can also edit a PL file and transform it back to a @TeX{}-readable TFM with the companion program @code{pltotf} (@pxref{pltotf invocation,,, web2c, Web2c}). Editing metrics by hand is not something you're likely to want to do often, but the capability is there. @item @cindex pfm files @flindex .pfm @r{printer font metric files} ATM and other typesetting systems use @dfn{printer font metric} (@samp{.pfm}) files. These are binary files. They are irrelevant in the @TeX{} world, and not freely available, so we will not discuss them further. @end itemize The Afm2tfm program distributed with Dvips converts an AFM file to a TFM file and performs other useful transformations as well. @xref{Invoking afm2tfm}. @node Glyph files @subsection Glyph files @cindex glyph files Although a metric file (see the previous section) contains information about the spatial and other properties of the character at position 75, say, it contains nothing about what the character at position 75 actually looks like. The glyphs---the actual shapes of the letterforms in a font---are defined by other files, which we call glyph files. @TeX{} itself only reads the TFM file for a font; it does not need to know character shapes. A @dfn{glyph file} is a file that defines the shapes of the characters in a font. The shapes can be defined either by outlines or by bitmaps. @cindex outline fonts @cindex arcs @cindex splines PostScript fonts are defined as @dfn{outline fonts}: Each character in the font is defined by giving the mathematical curves (lines, arcs, and splines) that define its contours. Different sizes of a character are generated by linearly scaling a single shape. For example, a 10-point `A' is simply half the size of a 20-point `A'. Nowadays, outline fonts usually also contain @dfn{hints}---additional information to improve the appearance of the font at small sizes or low resolutions. @cindex Type 1 fonts @cindex pfa files @cindex pfb files @flindex .pfa @r{printer font ascii files} @flindex .pfb @r{printer font binary files} Although various kinds of PostScript outline fonts exist, by far the most common, and the only one we will consider, is called @dfn{Type 1}. The glyph files for PostScript Type 1 fonts typically have names ending in @samp{.pfa} (``printer font ASCII'') or @samp{.pfb} (``printer font binary''). @cindex bitmap fonts @flindex .mf @r{Metafont source files} @cindex Metafont source files In contrast, glyph files for Computer Modern and the other standard @TeX{} fonts are @dfn{bitmap fonts}, generated from Metafont (@samp{.mf}) descriptions. The Metafont program distributed with @TeX{} generates bitmaps from these descriptions. @cindex pk files @flindex .@var{nnn}pk @r{packed font bitmaps} The glyph files for @TeX{} bitmap fonts are usually stored in @dfn{packed font} (PK) files. The names of these files end in @samp{.@var{nnn}pk}, where @var{nnn} is the resolution of the font in dots per inch. For example, @file{cmr10.600pk} contains the bitmaps for the @samp{cmr10} font at a resolution of 600@dmn{dpi}. (On DOS filesystems, it's more likely @file{dpi600\cmr10.pk}.) @cindex gf files @pindex gftopk Metafont actually outputs @dfn{generic font} (GF) files, e.g., @file{cmr10.600gf}, but the GF files are usually converted immediately to PK format (using the @code{gftopk} utility that comes with @TeX{}) since PK files are smaller and contain the same information. (The GF format is a historical artifact.) @node Virtual fonts @subsection Virtual fonts @cindex virtual fonts A @dfn{virtual font} is constructed by extracting characters from one or more existing fonts and rearranging them, or synthesizing new characters in various ways. The explanation in this manual is intended to suffice for understanding enough about virtual fonts to use them with Dvips. It isn't a reference manual on virtual fonts. For more information: The primary document on virtual fonts is Donald@tie{}E. Knuth, @cite{TUGboat} 11(1), Apr.@: 1990, pp.@: 13--23, ``Virtual Fonts: More Fun for Grand Wizards'' (@url{mirror.ctan.org/info/virtual-fonts.knuth}). (Don't be intimidated by the subtitle.) @cindex vf files @cindex vpl files A virtual font (@samp{.vf}) file specifies, for each character in the virtual font, a recipe for typesetting that character. A VF file, like a TFM file, is in a compressed binary format. The @code{vftovp} and @code{vptovf} programs convert a VF file to a human-readable VPL (virtual property list) format and back again. @xref{vftovp invocation,,, web2c, Web2c}, and @ref{vptovf invocation,,, web2c, Web2c}. @cindex base fonts In the case of a PostScript font @var{f} being used in a straightforward way, the recipe says: character @var{i} in the VF font is character @var{j} in font @var{f}. The font @var{f} is called a @dfn{base font}. For example, the VF file could remap the characters of the PostScript font to the positions where @TeX{} expects to find them. @xref{Encodings}. Since @TeX{} reads only TFM files, not VF's, each VF must have a corresponding TFM for use with @TeX{}. This corresponding TFM is created when you run @code{vptovf}. @cindex expansion, of virtual fonts @cindex virtual font expansion You can @dfn{expand} virtual fonts into their base fonts with DVIcopy (@pxref{dvicopy invocation,,, web2c, Web2c}). This is useful if you are using a DVI translator that doesn't itself understand vf's. @pindex ptex @r{JFM} @pindex uptex @r{JFM} @cindex Japanese font metric file @cindex JFM file, and virtual font fallback If a virtual font has no entry at a given codepoint and the first @code{MAPFONT} designates an (u)pTeX JFM, we designate the glyph of the same codepoint in the TFM(JFM) with the smallest font ID. This feature helps to reduce the size of Japanese virtual fonts. For more information about the extensive support of Japanese in TeX, see @url{https://github.com/texjporg}. @node Encodings @subsection Encodings @cindex encodings Every font, whatever its type, has an @dfn{encoding}, that specifies the correspondence between ``logical'' characters and character codes. For example, the ASCII encoding specifies that the character numbered 65 (decimal) is an uppercase `A'. The encoding does not specify what the character at that position looks like; there are lots of ways to draw an `A', and a glyph file (@pxref{Glyph files}) tells how. Nor does it specify how much space that character occupies; that information is in a metric file (@pxref{Metric files}). @cindex Computer Modern, encoding of @TeX{} implicitly assumes a particular encoding for the fonts you use with it. For example, the plain @TeX{} macro @code{\'}, which typesets an acute accent over the following letter, assumes the acute accent is at position 19 (decimal). This happens to be true of standard @TeX{} fonts such as Computer Modern, as you might expect, but it is not true of normal PostScript fonts. It's possible but painful to change all the macros that assume particular character positions. A better solution is to create a new font with the information for the acute accent at position 19, where @TeX{} expects it to be. @xref{Making a font available}. @cindex PostScript encoding @cindex encoding files @cindex encoding vectors, defined PostScript represents encodings as a sequence of 256 character names called an @dfn{encoding vector}. An @dfn{encoding file} (@samp{.enc}) gives such a vector, together with ligature and kerning information (with which we are not concerned at the moment). These encoding files are used by the Afm2tfm program. Encoding files are also downloaded to the PostScript interpreter in your printer if you use one of them in place of the default encoding vector for a particular PostScript font. @flindex dvips.enc @flindex 8r.enc @flindex texmext.enc @flindex texmital.enc @flindex texmsym.enc @flindex reencode/*.enc Examples of encodings: the @file{dvips.enc} encoding file that comes with the Fontname distribution (@url{http://tug.org/fontname}) is a good (but not perfect) approximation to the @TeX{} encoding for @TeX{}'s Computer Modern text fonts. This is the encoding of the fonts that originated with Dvips, such as @file{ptmr.tfm}. The distribution includes many other encoding files; for example, @file{8r.enc}, which is the base font for the current PostScript font distribution, and three corresponding to the @TeX{} mathematics fonts: @file{texmext.enc} for math extensions, @file{texmital.enc} for math italics, and @file{texmsym.enc} for math symbols. @node Bitmap font encodings @subsection Bitmap font encodings @cindex bitmap font encodings @cindex font encodings, bitmap @cindex encodings, for bitmap fonts To dvips, bitmapped fonts do not have any notion of linguistics; they are simply a vector of glyphs. By comparison, PostScript fonts are required to contain an encoding vector that at least provides glyph names; these names can permit PostScript and PDF viewers to extract legible text from PostScript and PDF output. Unlike previous versions, dvips versions 2020 and later add glyph naming information to Type 3 bitmapped fonts (if they can locate such information) as an Encoding vector. This provides some support for search, for copy and paste, and even some limited support for accessibility. The @samp{bitmapfontenc} command line option (@pxref{Option details} and @code{bitmapfontenc} configuration option (@pxref{Configuration file commands}) enable and disable this functionality; by default it is set to enabled, without warnings. @flindex dvips-all.enc To do this, dvips must find encoding information for the bitmapped fonts. It does this by first searching for a font-specific encoding file; for instance, for cmr10, it will search for @file{dvips-cmr10.enc} in the standard encoding path. If it does not find such a file, it will search for a @file{dvips-all.enc} file which contains a base set of encodings for many fonts. The specific syntax of an encoding file is unspecified, except that it must be a PostScript fragment that leaves exactly one object on the operand stack. (This is different from the encoding files used to define encodings for PostScript fonts, described earlier). Normally that object is just an array of 256 names; in this case, that array is used as the encoding vector for the font. Alternatively, the object can be a procedure that, when executed, leaves a legal encoding vector on the stack. This second option is made available to support future enhancements that may add additional constructs to the font dictionary to enhance the interpretation of font characters. The @file{dvips-all.enc} file contains encodings for many fonts, and it is loaded by dvips at most once. The format is just a sequence of font names, one per line, each terminated by a colon, followed by the encoding to use for those files. @cindex bounding box, for bitmap fonts @cindex coordinate system, for bitmap fonts As part of its operation, to enable heuristics in PostScript and PDF viewers to properly identify word breaks and column gutters, dvips also generates a modified font bounding box and a modified font coordinate system. @node PostScript typesetting @subsection How PostScript typesets a character @cindex typesetting in PostScript @cindex character lookup procedure in PostScript The output of Dvips is a program in the PostScript language that instructs your (presumably PostScript-capable) printer how to typeset your document by transforming it into toner on paper. Your printer, in turn, contains a PostScript interpreter that carries out the instructions in this typesetting program. The program must include the definition of any PostScript fonts that you use in your document. Fonts built into your printer (probably the standard 35: @samp{Times-Roman}, @samp{ZapfDingbats}, @dots{}) are defined within the interpreter itself. Other fonts must be downloaded as pfa or pfb files (@pxref{Glyph files}) from your host (the computer on which you're running Dvips). You may be wondering exactly how a PostScript interpreter figures out what character to typeset, with this mass of metrics, glyphs, encodings, and other information. (If you're not wondering, skip this section @dots{}) @findex show @r{PostScript operator} The basic PostScript operator for imaging characters is @code{show}. Suppose you've asked @TeX{} to typeset an `S'. This will eventually wind up in the Dvips output as the equivalent of this PostScript operation: @example (S) show @end example @noindent Here is how PostScript typesets the `S': @enumerate @item @cindex ASCII character codes, used by PostScript PostScript interpreters use ASCII; therefore `S' is represented as the integer 83. (Any of the 256 possible characters representable in a standard 8-bit byte can be typeset.) @item @cindex current font, in PostScript @cindex dictionary, PostScript language A PostScript @dfn{dictionary} is a mapping of names to arbitrary values. A font, to the interpreter, is a dictionary which contains entries for certain names. (If these entries are missing, the interpreter refuses to do anything with that font.) PostScript has a notion of ``the current font''---whatever font is currently being typeset in. @item @cindex encoding vectors, in Type 1 fonts @findex Encoding @r{Type 1 dictionary} One of the mandatory entries in a font dictionary is @samp{Encoding}, which defines the encoding vector (@pxref{Encodings}) for that font. This vector of 256 names maps each possible input character to a name. @item The interpreter retrieves the entry at position 83 of the encoding vector. This value is a PostScript name: @code{/S}. @item @findex CharStrings @r{Type 1 dictionary} @cindex dictionary, @code{CharStrings} For Type 1 fonts (we're not going to discuss anything else), the interpreter now looks up @code{/S} as a key in a dictionary named @code{CharStrings}, another mandatory entry in a font dictionary. @item @cindex hints @cindex character definitions in PostScript The value of @code{S} in @code{CharStrings} is the equivalent of a series of standard PostScript commands like @samp{curveto}, @samp{lineto}, @samp{fill}, and so on. These commands are executed to draw the character. There can also be @dfn{hint information} that helps adapt the character to low-resolution rasters. (@xref{Glyph files}.) The commands are actually represented in a more compact way than standard PostScript source; see the Type 1 book for details. @end enumerate This method for typesetting characters is used in both Level 1 and Level 2 PostScript. See the PostScript reference manuals for more information. @node Making a font available @section Making a PostScript font available @cindex installing fonts @cindex fonts, installing To make a PostScript font available in a @TeX{} document, you need to install the font on your system and then define it within the document. Once you have installed the font, of course, it is available for any document thereafter and you don't need to reinstall it. You must have an AFM file for any font you install. Unless the font is built into your printer, you must also have a PFA or PFB file. In the following examples, we use the font @samp{Times-Roman} to illustrate the process. But you should use the prebuilt fonts for Times and the other standard fonts, rather than rebuilding them. The prebuilt fonts are made using a more complicated process than that described here, to make them work as well as possible with @TeX{}. So following the steps in this manual will not generate files identical to the distributed ones. @xref{PostScript font installation}, for pointers to the prebuilt fonts. Installation of a PostScript font proceeds in three steps. @xref{Font concepts}, for descriptions of the various files involved. @enumerate @item Run @code{afm2tfm} to create a TFM file for the original font, and the VPL form of the virtual font: @example afm2tfm Times-Roman -v ptmr rptmr @end example @item Run @code{vptovf} to generate a VF and TFM file for the virtual font from the VPL file: @example vptovf ptmr.vpl ptmr.vf ptmr.tfm @end example @item Insert an entry for the font in @file{psfonts.map} (@pxref{psfonts.map}): @example rptmr Times-Roman } signs, you can make the ligature scanning operation skip that many resulting characters before proceeding. This works just like in Metafont. For example, the `fi' ligature is specified with @w{@samp{f i =: fi ;}}. A more convoluted ligature is @samp{one one |=:|>> exclam ;} which separates a pair of adjacent @code{1}'s with an exclamation point, and then skips over two of the resulting characters before continuing searching for ligatures and kerns. You cannot give more @t{>}'s than @t{|}'s in an ligature operation, so there are a total of eight possibilities: @example =: |=: |=:> =:| =:|> |=:| |=:|> |=:|>> @end example The default set of ligatures and kerns built in to Afm2tfm is: @example % LIGKERN question quoteleft =: questiondown ; % LIGKERN exclam quoteleft =: exclamdown ; % LIGKERN hyphen hyphen =: endash ; endash hyphen =: emdash ; % LIGKERN quoteleft quoteleft =: quotedblleft ; % LIGKERN quoteright quoteright =: quotedblright ; % LIGKERN space @{@} * ; * @{@} space ; 0 @{@} * ; * @{@} 0 ; % LIGKERN 1 @{@} * ; * @{@} 1 ; 2 @{@} * ; * @{@} 2 ; 3 @{@} * ; * @{@} 3 ; % LIGKERN 4 @{@} * ; * @{@} 4 ; 5 @{@} * ; * @{@} 5 ; 6 @{@} * ; * @{@} 6 ; % LIGKERN 7 @{@} * ; * @{@} 7 ; 8 @{@} * ; * @{@} 8 ; 9 @{@} * ; * @{@} 9 ; @end example @node Special font effects @subsection Special font effects @cindex oblique fonts @cindex slanted fonts @cindex fonts, slanted Besides the reencodings described in the previous section, Afm2tfm can do other manipulations. (Again, it's best to use the prebuilt fonts rather than attempting to remake them.) @samp{-s @var{slant}} makes an obliqued variant, as in: @example afm2tfm Times-Roman -s .167 -v ptmro rptmro @end example @noindent This creates @file{ptmro.vpl} and @file{rptmro.tfm}. To use this font, put the line @findex SlantFont @example rptmro Times-Roman ".167 SlantFont" @end example @noindent @flindex psfonts.map into @file{psfonts.map}. Then @samp{rptmro} (our name for the obliqued Times) will act as if it were a resident font, although it is actually constructed from Times-Roman via the PostScript routine @code{SlantFont} (which will slant everything 1/6 to the right, in this case). @cindex expanded fonts @cindex fonts, expanded Similarly, you can get an expanded font with @example afm2tfm Times-Roman -e 1.2 -v ptmrre rptmrre @end example @noindent and by recording the pseudo-resident font @findex ExtendFont @example rptmrre Times-Roman "1.2 ExtendFont" @end example @noindent in @file{psfonts.map}. You can also create a small caps font with a command such as @cindex small caps fonts @cindex fonts, small caps @example afm2tfm Times-Roman -V ptmrc rptmrc @end example @noindent This will generate a set of pseudo-small caps mapped into the usual lowercase positions and scaled down to 0.8 of the normal cap dimensions. You can also specify the scaling as something other than the default 0.8: @example afm2tfm Times-Roman -c 0.7 -V ptmrc rptmrc @end example It is unfortunately not possible to increase the width of the small caps independently of the rest of the font. If you want a really professional looking set of small caps, you need to acquire a small caps font. @findex PaintType @cindex outline fonts @cindex fonts, outlined To change the @code{PaintType} in a font from filled (0) to outlined (2), you can add @code{"/PaintType 2 store"} to @file{psfonts.map}, as in the following: @example rphvrl Helvetica "/PaintType 2 store" @end example Afm2tfm writes to standard output the line you need to add to @file{psfonts.map} to use that font, assuming the font is resident in the printer; if the font is not resident, you must add the @samp{<@var{filename}} command to download the font. Each identical line only needs to be specified once in the @samp{psfonts.map} file, even though many different fonts (small caps variants, or ones with different output encodings) may be based on it. @node Afm2tfm options @subsection Afm2tfm options @cindex options, to Afm2tfm @cindex afm2tfm options Synopsis: @example afm2tfm [@var{option}]@dots{} @var{afmfile}[.afm] [@var{tfmfile}[.tfm]] @end example Afm2tfm reads @var{afmfile} and writes a corresponding (but ``raw'', see below) TFM file. If @var{tfmfile} is not supplied, the base name of the AFM file is extended with @samp{.tfm} to get the output filename. The simplest example: @example afm2tfm Times-Roman rptmr @end example @cindex accents, wrong @cindex raw tfm files @noindent The TFM file thus created is @dfn{raw} because it omits ligature and kern information, and does no character remapping; it contains only the character information in the AFM file in TFM format, which is the form that @TeX{} understands. The characters have the same code in the TFM file as in the AFM file. For text fonts, this means printable ASCII characters will work ok, but little else, because standard PostScript fonts have a different encoding scheme than the one that plain @TeX{} expects (@pxref{Encodings}). Although the encodings agree for most printable ASCII characters, other characters such as ligatures and accents vary. Thus, in practice, it's almost always desirable to create a virtual font as well with the @samp{-v} or @samp{-V} option. @xref{Making a font available}. The command line options to Afm2tfm: @table @samp @item -a @opindex -a @cindex accent height adjustment, omitting By default, Afm2tfm looks for precomposed accented characters, such as tdieresis, and possibly adjusts the height of the basic letter (t) upward so that the result of using @code{\accent} (as in @code{\"t}) is visually the same as the precomposed characters. The @code{-a} option omits such adjustments, so that all characters' heights remain as they are given in the AFM file. (Until Afm2tfm 8.4, released in 2016, heights could also be adjusted downward, but this is no longer the case.) @item -c @var{ratio} @opindex -c @var{ratio} @cindex scaling small caps See @samp{-V}; overrides the default ratio of 0.8 for the scaling of small caps. @item -e @var{ratio} @opindex -e @var{ratio} @cindex expanded fonts @cindex condensed fonts Stretch characters horizontally by @var{ratio}; if less than 1.0, you get a condensed font. @item -O @opindex -O @cindex octal character codes Output all character codes in the @samp{vpl} file as octal numbers, not names; this is useful for symbol or other special-purpose fonts where character names such as @samp{A} have no meaning. @item -p @var{ps-enc} @opindex -p @var{ps-enc} Use @var{ps-enc} for the destination (PostScript) encoding of the font; @var{ps-enc} must be mentioned as a header file for the font in @samp{psfonts.map}. @xref{Changing PostScript encodings}. @item -s @var{slant} @opindex -s @var{slant} @cindex slanted fonts, making Slant characters to the right by @var{slant}. If @var{slant} is negative, the letters slope to the left (or they might be upright if you start with an italic font). @item -t @var{tex-enc} @opindex -t @var{tex-enc} Use @var{tex-enc} for the target (@TeX{}) encoding of the font. Ligature and kern information may also be specified in @var{file}. @var{file} is not mentioned in @file{psfonts.map}. @item -T @var{ps-tex-enc} @opindex -T @var{ps-tex-enc} Use @var{ps-tex-enc} for both the PostScript and target @TeX{} encodings of the font. Equivalent to @samp{-p @var{file} -t @var{file}}. @item -u @opindex -u Use only those characters specified in the @TeX{} encoding, and no others. By default, Afm2tfm tries to include all characters in the input font, even those not present in the @TeX{} encoding (it puts them into otherwise-unused positions, arbitrarily). @item -v @var{vpl-file} @opindex -v @var{vpl-file} Output a VPL (virtual property list) file, as well as a TFM file. @item -V @var{vpl-file} @opindex -V @var{vpl-file} Same as @samp{-v}, but the virtual font generated is a pseudo small caps font obtained by scaling uppercase letters by 0.8 to typeset lowercase. This font handles accented letters and retains proper kerning. @end table @node psfonts.map @section @file{psfonts.map}: PostScript font catalog @flindex psfonts.map @cindex non-resident fonts @cindex downloading PostScript fonts @cindex fonts, downloading The @file{psfonts.map} file associates a PostScript font with related files and constructs. Each line has the format: @example @var{filename} @var{PostScript-name} @var{options} @end example @kindex < @r{font downloading} For example, the line @example rpstrn StoneInformal