/*- ****************************************************************************** ****************************************************************************** ** ** MODULE ** ** $RCSfile: utils.c,v $ ** $Revision: 3.71 $ ** $Date: 1996/08/18 20:37:06 $ ** ** DESCRIPTION ** ** A 32-bit implementation of BibTeX v0.99c for MS-DOS, OS/2 2.x, ** Unix and VMS. This C language implementation is based on the ** original WEB source but it has been enhanced to support 8-bit input ** characters and a very large processing capacity. ** ** For documentation describing how to use and build this program, ** see the 00README.TXT file that accompanies this distribution. ** ** MODULE CONTENTS ** ** This module contains the new utility functions that will be used in ** the program. The functions are declared in alphabetical order. ** Functions defined in this module are: ** ** close_file ** debug_msg ** find_file ** open_ip_file ** open_op_file ** mymalloc ** myrealloc ** parse_cmd_line ** report_bibtex_capacity ** report_search_paths ** set_array_sizes ** usage ** ** 8-bit support functions: ** ** c8read_csf ** c8initialise ** c8read_lowercase ** c8read_lowupcase ** c8read_uppercase ** c8read_order ** c8report_8bit_handling ** ** AUTHORS ** ** Original WEB translation to C, conversion to "big" (32-bit) capacity, ** addition of run-time selectable capacity and 8-bit support extensions ** by: ** ** Niel Kempson ** Snowy Owl Systems Limited, Cheltenham, England ** E-mail: kempson@snowyowl.co.uk ** ** 8-bit support extensions also by: ** ** Alejandro Aguilar-Sierra ** Centro de Ciencias de la Atm\'osfera, ** Universidad Nacional Aut\'onoma de M\'exico, M\'exico ** E-mail: asierra@servidor.unam.mx ** ** COPYRIGHT ** ** This implementation copyright (c) 1991-1995 by Niel Kempson ** and copyright (c) 1995 by Alejandro Aguilar-Sierra. ** ** This program is free software; you can redistribute it and/or ** modify it under the terms of the GNU General Public License as ** published by the Free Software Foundation; either version 1, or ** (at your option) any later version. ** ** This program is distributed in the hope that it will be useful, ** but WITHOUT ANY WARRANTY; without even the implied warranty of ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ** General Public License for more details. ** ** You should have received a copy of the GNU General Public License ** along with this program; if not, write to the Free Software ** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ** ** In other words, you are welcome to use, share and improve this ** program. You are forbidden to forbid anyone else to use, share ** and improve what you give them. Help stamp out software-hoarding! ** ** ACKNOWLEDGEMENT ** ** The original BibTeX was written by Oren Patashnik using Donald ** Knuth's WEB system. This format produces a PASCAL program for ** execution and a TeX documented version of the source code. This ** program started as a (manual) translation of the WEB source into C. ** ** CHANGE LOG ** ** $Log: utils.c,v $ ** Revision 3.71 1996/08/18 20:37:06 kempson ** Official release 3.71 (see HISTORY file for details). ** ** Revision 3.70 1996/04/08 10:08:40 kempson ** Final documentation & cosmetic changes for official release 3.70. ** ** Revision 3.6 1995/10/21 22:20:42 kempson ** Fixed numerous bugs, improved error reporting and added the --wolfgang ** option. ** ** Revision 3.5 1995/09/24 20:44:37 kempson ** Many changes for final beta test version. ** ** Revision 3.4 1995/04/09 22:15:43 kempson ** Placed under RCS control ** ****************************************************************************** ****************************************************************************** */ #ifdef HAVE_CONFIG_H #include #endif #include #ifdef WIN32 #include #else #include #endif #ifdef KPATHSEA #include #include #include #include #ifndef WIN32 #include #endif #endif #include "sysdep.h" #include "bibtex.h" #include "datatype.h" #include "gblprocs.h" #include "gblvars.h" #include "utils.h" #include "version.h" /* Include the ICU heads. 23/sep/2009 */ #include "unicode/ustdio.h" #include "unicode/uchar.h" #include "unicode/ucnv.h" #include "unicode/ucol.h" /* ** Useful macros to keep the code nicely formatted. */ #define FSE(_a) fprintf (stderr, _a); #define FSO(_a) fprintf (TERM_OUT, _a); #define LOG_CAPACITY(_a) \ FPRINTF (log_file, " %-15s = %7ld\n", #_a, (long) _a) #define ISEMPTYSTR(_a) ((_a == NULL) || (*_a == '\0')) #define NULLCHECK(_a) (ISEMPTYSTR(_a) ? "" : _a) /*- ** Options supported by the program and parsed by getopt(). Each option ** can be specified by a "traditional" single character argument ** preceeded by a dash (e.g. "-7") or a more descriptive parameter ** preceeded by two dashes (e.g. "--ascii"). Each option is also defined ** as either not taking a value, optinally taking a value or requiring a ** value. */ #define VALUE_NONE 0 #define VALUE_REQD 1 #define VALUE_OPT 2 /* Add the option "-l" for language, and "-o" for location. 23/sep/2009 */ static struct option long_options[] = { {"debug", VALUE_REQD, 0, 'd'}, {"help", VALUE_NONE, 0, '?'}, {"statistics", VALUE_NONE, 0, 's'}, {"trace", VALUE_NONE, 0, 't'}, {"version", VALUE_NONE, 0, 'v'}, {"language", VALUE_REQD, 0, 'l'}, {"location", VALUE_REQD, 0, 'o'}, {"big", VALUE_NONE, 0, 'B'}, {"huge", VALUE_NONE, 0, 'H'}, {"wolfgang", VALUE_NONE, 0, 'W'}, {"min_crossrefs", VALUE_REQD, 0, 'M'}, {"mcites", VALUE_REQD, 0, '\x0A'}, /* obsolete */ {"mentints", VALUE_REQD, 0, '\x0B'}, /* obsolete */ {"mentstrs", VALUE_REQD, 0, '\x0C'}, /* obsolete */ {"mfields", VALUE_REQD, 0, '\x0D'}, /* obsolete */ {"mpool", VALUE_REQD, 0, '\x0E'}, /* obsolete */ {"mstrings", VALUE_REQD, 0, '\x0F'}, {"mwizfuns", VALUE_REQD, 0, '\x10'}, /* obsolete */ {0, 0, 0, 0} }; static const char *getopt_str = ":d:?stvl:o:BHM:W"; /* ** Forward declaration of private functions and variables used in this ** module for 8-bit support. */ #ifdef SUPPORT_8BIT static int c8read_csf (void); static void c8read_lowupcase (void); static void c8read_lowercase (void); static void c8read_order (void); static void c8read_uppercase (void); static void c8report_8bit_handling (void); static FILE *c8_cs_file; static int c8_line; static int sort_weight; #endif /* SUPPORT_8BIT */ /*- **============================================================================ ** allocate_arrays() ** ** Allocate memory dynamically for the large arrays whose size is fixed, ** regardless of the amount memory of memory available. If these arrays are ** declared statically, the linker will complain about an overflowing text ** segment. ** ** Allocate memory dynamically for the large arrays whose size is set ** dynamically, depending on the amount memory of memory available. ** ** AlphaFile_T bib_file[Max_Bib_Files + 1]; ** StrNumber_T bib_list[Max_Bib_Files + 1]; ** ASCIICode_T buffer[Buf_Size + 1]; ** StrNumber_T cite_info[Max_Cites + 1]; ** StrNumber_T cite_list[Max_Cites + 1]; ** Boolean_T entry_exists[Max_Cites + 1]; ** Integer_T entry_ints[Max_Ent_Ints + 1]; ** ASCIICode_T entry_strs[Max_Ent_Strs + 1][ENT_STR_SIZE + 1]; ** ASCIICode_T ex_buf[Buf_Size + 1]; ** StrNumber_T field_info[Max_Fields + 1]; ** FnClass_T fn_type[Hash_Size + 1]; ** ASCIICode_T global_strs[MAX_GLOB_STRS + 1]; ** StrIlk_T hash_ilk[Hash_Size + 1]; ** HashPointer_T hash_next[Hash_Size + 1]; ** StrNumber_T hash_text[Hash_Size + 1]; ** Integer_T ilk_info[Hash_Size + 1]; ** ASCIICode_T name_sep_char[Buf_Size + 1]; ** BufPointer_T name_tok[Buf_Size + 1]; ** ASCIICode_T out_buf[Buf_Size + 1]; ** StrNumber_T s_preamble[Max_Bib_Files + 1]; ** ASCIICode_T str_pool[Pool_Size + 1]; ** PoolPointer_T str_start[Max_Strings + 1]; ** ASCIICode_T sv_buffer[Buf_Size + 1]; ** HashPtr2_T type_list[Max_Cites + 1]; ** HashPtr2_T wiz_functions[Wiz_Fn_Space + 1]; **============================================================================ */ static void allocate_arrays (void) { unsigned long bytes_required; ASCIICode_T *dummy_ptr; int row; debug_msg (DBG_MEM, "Starting to allocate memory for arrays ... "); /* ** AlphaFile_T bib_file[Max_Bib_Files + 1]; */ bytes_required = (Max_Bib_Files + 1) * (unsigned long) sizeof (AlphaFile_T); bib_file = (AlphaFile_T *) mymalloc (bytes_required, "bib_file"); /* ** StrNumber_T bib_list[Max_Bib_Files + 1]; */ bytes_required = (Max_Bib_Files + 1) * (unsigned long) sizeof (StrNumber_T); bib_list = (StrNumber_T *) mymalloc (bytes_required, "bib_list"); /* ** ASCIICode_T buffer[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (ASCIICode_T); buffer = (ASCIICode_T *) mymalloc (bytes_required, "buffer"); /* ** StrNumber_T cite_info[Max_Cites + 1]; */ bytes_required = (Max_Cites + 1) * (unsigned long) sizeof (StrNumber_T); cite_info = (StrNumber_T *) mymalloc (bytes_required, "cite_info"); /* ** StrNumber_T cite_list[Max_Cites + 1]; */ bytes_required = (Max_Cites + 1) * (unsigned long) sizeof (StrNumber_T); cite_list = (StrNumber_T *) mymalloc (bytes_required, "cite_list"); /* ** Boolean_T entry_exists[Max_Cites + 1]; */ bytes_required = (Max_Cites + 1) * (unsigned long) sizeof (Boolean_T); entry_exists = (Boolean_T *) mymalloc (bytes_required, "entry_exists"); /* ** Boolean_T entry_ints[Max_Ent_Ints + 1]; ** allocated when num_ent_ints and num_cites are known */ entry_ints = NULL; /* ** ASCIICode_T entry_strs[Max_Ent_Strs + 1][ENT_STR_SIZE + 1]; ** allocated when num_ent_strs and num_cites are known */ entry_strs = NULL; /* ** ASCIICode_T ex_buf[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (ASCIICode_T); ex_buf = (ASCIICode_T *) mymalloc (bytes_required, "ex_buf"); /* ** StrNumber_T field_info[Max_Fields + 1]; */ bytes_required = (Max_Fields + 1) * (unsigned long) sizeof (StrNumber_T); field_info = (StrNumber_T *) mymalloc (bytes_required, "field_info"); /* ** FnClass_T fn_type[Hash_Size + 1]; */ bytes_required = (Hash_Size + 1) * (unsigned long) sizeof (FnClass_T); fn_type = (FnClass_T *) mymalloc (bytes_required, "fn_type"); /* ** ASCIICode_T global_strs[MAX_GLOB_STRS][GLOB_STR_SIZE + 1]; */ bytes_required = (unsigned long) (MAX_GLOB_STRS) * (GLOB_STR_SIZE + 1) * (unsigned long) sizeof (ASCIICode_T); dummy_ptr = (ASCIICode_T *) mymalloc (bytes_required, "global_strs"); for (row = 0; row < (MAX_GLOB_STRS + 1); row++) { global_strs[row] = dummy_ptr + (row * (GLOB_STR_SIZE + 1)); } /* ** StrIlk_T hash_ilk[Hash_Size + 1]; */ bytes_required = (Hash_Size + 1) * (unsigned long) sizeof (StrIlk_T); hash_ilk = (StrIlk_T *) mymalloc (bytes_required, "hash_ilk"); /* ** HashPointer_T hash_next[Hash_Size + 1]; */ bytes_required = (Hash_Size + 1) * (unsigned long) sizeof (HashPointer_T); hash_next = (HashPointer_T *) mymalloc (bytes_required, "hash_next"); /* ** StrNumber_T hash_text[Hash_Size + 1]; */ bytes_required = (Hash_Size + 1) * (unsigned long) sizeof (StrNumber_T); hash_text = (StrNumber_T *) mymalloc (bytes_required, "hash_text"); /* ** Integer_T ilk_info[Hash_Size + 1]; */ bytes_required = (Hash_Size + 1) * (unsigned long) sizeof (Integer_T); ilk_info = (Integer_T *) mymalloc (bytes_required, "ilk_info"); /* ** ASCIICode_T name_sep_char[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (ASCIICode_T); name_sep_char = (ASCIICode_T *) mymalloc (bytes_required, "name_sep_char"); /* ** BufPointer_T name_tok[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (BufPointer_T); name_tok = (BufPointer_T *) mymalloc (bytes_required, "name_tok"); /* ** ASCIICode_T out_buf[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (ASCIICode_T); out_buf = (ASCIICode_T *) mymalloc (bytes_required, "out_buf"); /* ** StrNumber_T s_preamble[Max_Bib_Files + 1]; */ bytes_required = (Max_Bib_Files + 1) * (unsigned long) sizeof (StrNumber_T); s_preamble = (StrNumber_T *) mymalloc (bytes_required, "s_preamble"); /* ** ASCIICode_T str_pool[Pool_Size + 1]; */ bytes_required = (Pool_Size + 1) * (unsigned long) sizeof (ASCIICode_T); str_pool = (ASCIICode_T *) mymalloc (bytes_required, "str_pool"); /* ** PoolPointer_T str_start[Max_Strings + 1]; */ bytes_required = (Max_Strings + 1) * (unsigned long) sizeof (PoolPointer_T); str_start = (PoolPointer_T *) mymalloc (bytes_required, "str_start"); /* ** ASCIICode_T sv_buffer[Buf_Size + 1]; */ bytes_required = (Buf_Size + 1) * (unsigned long) sizeof (ASCIICode_T); sv_buffer = (ASCIICode_T *) mymalloc (bytes_required, "sv_buffer"); /* ** HashPtr2_T type_list[Max_Cites + 1]; */ bytes_required = (Max_Cites + 1) * (unsigned long) sizeof (HashPtr2_T); type_list = (HashPtr2_T *) mymalloc (bytes_required, "type_list"); /* ** HashPtr2_T wiz_functions[Wiz_Fn_Space + 1]; */ bytes_required = (Wiz_Fn_Space + 1) * (unsigned long) sizeof (HashPtr2_T); wiz_functions = (HashPtr2_T *) mymalloc (bytes_required, "wiz_functions"); } /* allocate_arrays () */ /*- **============================================================================ ** checkdbg() ** ** Examine a string representing different debug options, usually provided ** as a value to a command line option, and return the value as a long ** integer. Return 0 (no debugging) if a valid option was not parsed. **============================================================================ */ static int checkdbg (char *str) { int dbgval = 0; if ((str == NULL) || (*str == '\0')) return (0); if (strstr (str, "all") != NULL) dbgval |= DBG_ALL; if (strstr (str, "csf") != NULL) dbgval |= DBG_CSF; if (strstr (str, "io") != NULL) dbgval |= DBG_IO; if (strstr (str, "mem") != NULL) dbgval |= DBG_MEM; if (strstr (str, "misc") != NULL) dbgval |= DBG_MISC; if (strstr (str, "search") != NULL) dbgval |= DBG_SRCH; return (dbgval); } /* checkdbg() */ /*- **============================================================================ ** checklong() ** ** Examine a string representing an integer, usually provided as a value to ** a command line option, and return the value as a long integer. ** Return -1 if a valid integer was not parsed. **============================================================================ */ static long checklong (char *str) { long value; char *endptr; int len; len = strlen (str); value = strtol (str, &endptr, 10); if (str == endptr) return (-1); if ((endptr - str) < len) return (-1); return (value); } /* checklong() */ /*- **============================================================================ ** close_file() ** ** Close a file - as long as it's open. **============================================================================ */ void close_file (const AlphaFile_T file_pointer) { if (file_pointer != NULL) fclose (file_pointer); } /* close_file() */ /* */ /*void close_u_file (const UFILE * u_file_pointer) { if (u_file_pointer != NULL) u_fclose (u_file_pointer); } */ /*- **============================================================================ ** debug_msg() ** ** Write a debugging message to the stderr stream, but only if the ** appropriate debugging option has been selected. **============================================================================ */ void debug_msg (const int status, const char *printf_fmt, ...) { va_list printf_args; const char *prefix; switch (status) { case DBG_CSF: if ((Flag_debug & DBG_CSF) == 0) return; prefix = "D-CSF"; break; case DBG_IO: if ((Flag_debug & DBG_IO) == 0) return; prefix = "D-I/O"; break; case DBG_MEM: if ((Flag_debug & DBG_MEM) == 0) return; prefix = "D-MEM"; break; case DBG_MISC: if ((Flag_debug & DBG_MISC) == 0) return; prefix = "D-MSC"; break; case DBG_SRCH: if ((Flag_debug & DBG_SRCH) == 0) return; prefix = "D-SCH"; break; default: return; } if (printf_fmt != NULL) { fprintf (stderr, "%s: ", prefix); va_start (printf_args, printf_fmt); vfprintf (stderr, printf_fmt, printf_args); va_end (printf_args); fprintf (stderr, "\n"); fflush (stderr); } } /* debug_msg () */ #ifndef KPATHSEA /*- **============================================================================ ** find_file() ** ** Search along a path for a file. The search path is specified by the ** value of an environment variable which can contain multiple directories, ** separated by an appropriate delimiter. The best known example is the ** PATH environment variable found on DOS, OS/2 and Unix. ** ** If the environment variable is not specified, or it has not been set, ** a 'fallback' path will be used. The current working directory will be ** searched first, then directories along the search path define dby the ** environment variable or fallback path. ** ** If the file is found along the search path, a value of 0 is returned and ** the full file specification is stored in parameter full_file_spec. If ** the file was not found, -1 is returned. **============================================================================ */ int find_file (const char *envvar_name, const char *fallback_path, const char *filename, char *full_file_spec) { char c; int len = 0; char *search_path; debug_msg (DBG_SRCH, "find_file: searching for file name `%s'", filename); debug_msg (DBG_SRCH, "find_file: environment variable for search path = `%s'", (envvar_name == NULL) ? "NULL" : envvar_name); debug_msg (DBG_SRCH, "find_file: fallback path = `%s'", (fallback_path == NULL) ? "NULL" : fallback_path); if ((envvar_name == NULL) || (*envvar_name == '\0')) { search_path = NULL; debug_msg (DBG_SRCH, "find_file: no environment variable specified"); } else { search_path = getenv (envvar_name); debug_msg (DBG_SRCH, "find_file: %s = `%s'", envvar_name, (search_path == NULL) ? "NULL" : search_path); } /* ** If we have a NULL search path because an environment variable name was ** not specified or specified but not defined, we use the fallback ** search path. */ if (search_path == NULL) { debug_msg (DBG_SRCH, "find_file: using fallback search path `%s'", (fallback_path == NULL) ? "NULL" : fallback_path); search_path = (char *) fallback_path; } /* ** Work along the search path looking for the wanted file. Stop when ** the first match is found. */ while (1) { full_file_spec[len] = '\0'; /* ** If the path is not empty, and it doesn't end in '/' or '\', ** append a trailing '/'. */ if (len != 0) { c = full_file_spec[len - 1]; if ((c != '/') && (c != '\\')) strcat (full_file_spec, "/"); } /* ** Append the filename to the path and then test whether the ** file exists. If not, return -1 and an empty string. */ strcat (full_file_spec, filename); debug_msg (DBG_SRCH, "find_file: trying `%s'", full_file_spec); if (access (full_file_spec, 0) == 0) break; if ((search_path == NULL) || (*search_path == '\0')) { full_file_spec[0] = '\0'; return (-1); } len = 0; for (;;) { if ((*search_path != PATH_DELIM) && (*search_path != '\0')) { if (*search_path == '\\') full_file_spec[len] = '/'; else full_file_spec[len] = *search_path; ++len; ++search_path; } else break; } /* end for (;;) */ if (*search_path != '\0') ++search_path; } /* end while (1) */ debug_msg (DBG_SRCH, "find_file: returning `%s'", full_file_spec); return (0); } /* find_file() */ #endif /* ! KPATHSEA */ /*- **============================================================================ ** mymalloc() ** ** Allocate memory for a specified array and check whether the allocation ** was successful. If not, issue an error message and cause the program ** to stop with a fatal exit status. ** Allocate at least 1 byte, otherwise malloc may return NULL. **============================================================================ */ void *mymalloc (const unsigned long bytes_required, const char *array_name) { void *ptr; ptr = malloc (bytes_required ? bytes_required : 1); if (ptr == NULL) { printf ("\nFatal error: couldn't allocate %lu bytes for array `%s'", bytes_required, array_name); mark_fatal (); debug_msg (DBG_MISC, "calling longjmp (Exit_Program_Flag) ... "); longjmp (Exit_Program_Flag, 1); } else { debug_msg (DBG_MEM, "allocated %7lu bytes for array `%s'", bytes_required, array_name); } return (ptr); } /* mymalloc () */ /*- **============================================================================ ** myrealloc() ** ** Reallocate memory for a specified array and check whether the allocation ** was successful. If not, issue an error message and cause the program ** to stop with a fatal exit status. ** Allocate at least 1 byte, otherwise realloc may return NULL. **============================================================================ */ void *myrealloc (void *old_ptr, const unsigned long bytes_required, const char *array_name) { void *ptr; if (old_ptr == NULL) return mymalloc (bytes_required, array_name); ptr = realloc (old_ptr, bytes_required ? bytes_required : 1); if (ptr == NULL) { printf ("\nFatal error: couldn't reallocate %lu bytes for array `%s'", bytes_required, array_name); mark_fatal (); debug_msg (DBG_MISC, "calling longjmp (Exit_Program_Flag) ... "); longjmp (Exit_Program_Flag, 1); } else { debug_msg (DBG_MEM, "reallocated %7lu bytes for array `%s'", bytes_required, array_name); } return (ptr); } /* myrealloc () */ /*- **============================================================================ ** open_ip_file() ** ** Open a file for input after locating it using one of the five predefined ** search strategies defined by the parameter "search_path". This parameter ** can take 5 values: ** ** AUX_FILE - used for locating .aux files. Search for the file along the ** path defined by the environment variable AUX_INPUT_ENVVAR or ** if it is not defined, use the fallback path defined by ** AUX_INPUT_PATH. ** ** BIB_FILE - used for locating .bib files. Search for the file along the ** path defined by the environment variable BIB_INPUT_ENVVAR or ** if it is not defined, use the fallback path defined by ** BIB_INPUT_PATH. ** ** BST_FILE - used for locating .bst files. Search for the file along the ** path defined by the environment variable BST_INPUT_ENVVAR or ** if it is not defined, use the fallback path defined by ** BST_INPUT_PATH. ** ** CSF_FILE - used for locating .csf files. Search for the file along the ** path defined by the environment variable CSF_INPUT_ENVVAR or ** if it is not defined, use the fallback path defined by ** CSF_INPUT_PATH. ** ** NO_SEARCH_PATH - only look for the file in the current directory. ** ** Searching for the file is delegated to the function find_file(), and ** only if it was successful, does this function attempt to open the file. **============================================================================ */ FILE *open_ip_file (Integer_T search_path) { const char *filename = (const char *) name_of_file; #ifdef KPATHSEA string full_filespec; #else char full_filespec[FILE_NAME_SIZE + 1]; #endif FILE *fptr; int status; switch (search_path) { case AUX_FILE_SEARCH_PATH: #ifdef KPATHSEA status = ((full_filespec = kpse_find_file(filename, kpse_tex_format, false)) == NULL); #else status = find_file (AUX_INPUT_ENVVAR, AUX_INPUT_PATH, filename, full_filespec); #endif break; case BIB_FILE_SEARCH_PATH: #ifdef KPATHSEA status = ((full_filespec = kpse_find_file(filename, kpse_bib_format, false)) == NULL); #else status = find_file (BIB_INPUT_ENVVAR, BIB_INPUT_PATH, filename, full_filespec); #endif break; case BST_FILE_SEARCH_PATH: #ifdef KPATHSEA status = ((full_filespec = kpse_find_file(filename, kpse_bst_format, false)) == NULL); #else status = find_file (BST_INPUT_ENVVAR, BST_INPUT_PATH, filename, full_filespec); #endif break; case CSF_FILE_SEARCH_PATH: #ifdef KPATHSEA status = ((full_filespec = kpse_find_file(filename, kpse_bst_format, false)) == NULL); #else status = find_file (CSF_INPUT_ENVVAR, CSF_INPUT_PATH, filename, full_filespec); #endif break; case NO_SEARCH_PATH: default: #ifdef KPATHSEA status = ((full_filespec = kpse_find_file(filename, kpse_program_text_format, false)) == NULL); #else status = find_file (NULL, NULL, filename, full_filespec); #endif break; } /* end switch (search_path) */ /* ** find_file() will return zero if the file was found somewhere ** along the search path. If it does, try to open the file. */ if (status == 0) { debug_msg (DBG_IO, "open_ip_file: trying to open `%s' ... ", full_filespec); #ifdef KPATHSEA if (!kpse_in_name_ok(full_filespec)) goto not_ok; fptr = fopen (full_filespec, FOPEN_R_MODE); free (full_filespec); #else # if defined(MSDOS) || defined(OS2) fptr = fopen (full_filespec, "rt"); # endif # if defined(UNIX) || defined(VMS) fptr = fopen (full_filespec, "r"); #endif #endif /* ! KPATHSEA */ } /* ** Otherwise, return a NULL pointer. */ else { not_ok: debug_msg (DBG_IO, "open_ip_file: unable to open `%s' ... ", full_filespec); fptr = NULL; } return (fptr); } /* open_ip_file() */ /*- **============================================================================ ** open_op_file() ** ** Open a file for output in the current working directory. If the operating ** system makes a distinction between text and non-text files, make sure ** that the file is opened in "text" mode. **============================================================================ */ FILE *open_op_file (void) { const char *tmp_file_name = (const char *) name_of_file; FILE *fptr; debug_msg (DBG_IO, "open_op_file: trying to open `%s' ... ", tmp_file_name); /* ** Make sure that we open the output file as a "text" file. This ** varies according to the operating system. */ #if defined(KPATHSEA) if (kpse_out_name_ok(tmp_file_name)) fptr = fopen(tmp_file_name, FOPEN_W_MODE); else fptr = NULL; #else # if defined(MSDOS) || defined(OS2) fptr = fopen (tmp_file_name, "wt"); # endif # ifdef UNIX fptr = fopen (tmp_file_name, "w"); # endif # ifdef VMS fptr = fopen (tmp_file_name, "w", "rfm=var", "rat=cr"); # endif #endif /* ! KPATHSEA */ if (fptr == NULL) { printf ("open_op_file: error opening `%s'\n", tmp_file_name); } return (fptr); } /* open_op_file() */ /*- **============================================================================ ** parse_cmd_line() ** ** Parse the command line used to launch BibTeX and set options accordingly. ** Most of the work is done by the GNU getopt() function to support these ** long and short options: ** ** -? --help display this help text ** -7 --traditional operate in the traditional 7-bit mode ** -8 --8bit force 8-bit mode, even if no CS file ** -c --csfile FILE read FILE as the BibTeX character set ** and sort definition file ** -d --debug TYPE report debugging information. TYPE is one or ** more of all, csf, io, mem, misc, search. ** -s --statistics report internal statistics ** -t --trace report execution tracing ** -v --version report BibTeX version\n ** -B --big set large BibTeX capacity ** -H --huge set huge BibTeX capacity ** -W --wolfgang set really huge BibTeX capacity for Wolfgang ** -M --min_crossrefs ## set ## as the minimum number of cross refs ** required for automatic inclusion of the cross ** referenced entry in the citation list ** (default = 2) ** --mcites ## ignored ** --mentints ## ignored ** --mentstrs ## ignored ** --mfields ## ignored ** --mpool ## ignored ** --mstrings ## allow ## unique strings ** --mwizfuns ## ignored **============================================================================ */ void parse_cmd_line (int argc, char **argv) { int c; int no_files; Flag_7bit = FALSE; Flag_8bit = FALSE; Flag_big = FALSE; Flag_debug = FALSE; Flag_huge = FALSE; Flag_wolfgang = FALSE; Flag_stats = FALSE; Flag_trace = FALSE; Str_auxfile = NULL; Str_csfile = NULL; /* For the input of the option language and location. 23/sep/2009 */ Flag_language = FALSE; Str_language = NULL; Flag_location = FALSE; Str_location = NULL; while (1) { int option_index = 0; c = getopt_long (argc, argv, getopt_str, long_options, &option_index); if (c == EOF) break; switch (c) { case '?': /**************** -?, --help ***************/ usage (NULL); break; case 'B': /**************** -B, --big ****************/ Flag_big = TRUE; break; case 'd': /**************** -d, --debug **************/ if ((optarg == NULL) || (*optarg == '\0')) Flag_debug = DBG_ALL; else Flag_debug = checkdbg (optarg); break; case 'H': /**************** -H, --huge ***************/ Flag_huge = TRUE; break; case 'M': /**************** -M, --min_crossrefs ******/ M_min_crossrefs = checklong (optarg); if (M_min_crossrefs < 0) { mark_fatal (); usage ("invalid minimum cross references `%s'\n", optarg); } break; case 's': /**************** -s, --statistics *********/ Flag_stats = TRUE; break; case 't': /**************** -t, --trace **************/ Flag_trace = TRUE; break; case 'v': /**************** -v, --version ************/ FPRINTF (TERM_OUT, "%s\n", BANNER); FPRINTF (TERM_OUT, "Implementation: %s\n", IMPLEMENTATION); FPRINTF (TERM_OUT, "Release version: %s\n", VERSION); debug_msg (DBG_MISC, "calling longjmp (Exit_Program_Flag) ... "); longjmp (Exit_Program_Flag, 1); break; /* Get the option, and change the flag. 23/sep/2009 */ case 'l': Flag_language =TRUE; Str_language = optarg; break; case 'o': Flag_location =TRUE; Str_location = optarg; break; case 'W': /**************** -W, --wolfgang ***********/ Flag_wolfgang = TRUE; break; case '\x0A': /**************** --mcites *****************/ case '\x0B': /**************** --mentints ***************/ case '\x0C': /**************** --mentstrs ***************/ case '\x0D': /**************** --mfields ****************/ case '\x0E': /**************** --mpool *****************/ case '\x10': /**************** --mwizfuns ***************/ (void) checklong (optarg); /******** ignored ********/ break; case '\x0F': /**************** --mstrings ***************/ M_strings = checklong (optarg); if (M_strings < 0) { mark_fatal (); usage ("invalid max number of strings `%s'\n", optarg); } break; default: /**************** Unknown argument ********/ mark_fatal (); usage ("unknown option"); } /* end switch (c) */ } /* end while (1) */ /* ** Check that a single .aux file was specified. */ no_files = argc - optind; if (no_files == 1) Str_auxfile = argv[optind]; else if (no_files < 1) { mark_fatal (); usage ("no aux file specified"); } else { mark_fatal (); usage ("only one aux file may be specified"); } /* ** Check for contradictory options */ if (Flag_7bit && Flag_8bit) { mark_fatal (); usage ("can't specify --traditional and --8bit"); } if ((Flag_big && Flag_huge) || (Flag_big && Flag_wolfgang) || (Flag_huge && Flag_wolfgang)) { mark_fatal (); usage ("can only specify one of --big, --huge and --wolfgang"); } if ((Str_csfile != NULL) && (Flag_7bit)) { mark_fatal (); usage ("can't specify --csfile and --traditional"); } if ((Str_csfile != NULL) && (Flag_8bit)) { mark_fatal (); usage ("can't specify --csfile and --8bit"); } /* ** Check for options which have not been #defined into the code */ #ifndef DEBUG if (Flag_debug) FSO ("BibTeX: debugging support was not compiled into this version\n"); #endif /* DEBUG */ #ifndef STAT if (Flag_stats) FSO ("BibTeX: statistics support was not compiled into this version\n"); #endif /* STAT */ #ifndef TRACE if (Flag_trace) FSO ("BibTeX: tracing support was not compiled into this version\n"); #endif /* TRACE */ } /* parse_cmd_line() */ /*- **============================================================================ ** report_bibtex_capacity() ** ** If the log file has been opened, indicate BibTeX's capacity by reporting ** the size/values of some key values and arrays. Anything in mixed case ** has been set at run-time. **============================================================================ */ void report_bibtex_capacity (void) { if (log_file != NULL) { FPRINTF (log_file, "BibTeX's capacity set as follows:\n\n"); LOG_CAPACITY (AUX_STACK_SIZE); LOG_CAPACITY (Buf_Size); LOG_CAPACITY (ENT_STR_SIZE); LOG_CAPACITY (GLOB_STR_SIZE); LOG_CAPACITY (Hash_Prime); LOG_CAPACITY (Hash_Size); LOG_CAPACITY (LIT_STK_SIZE); LOG_CAPACITY (Max_Bib_Files); LOG_CAPACITY (Max_Cites); LOG_CAPACITY (Max_Fields); LOG_CAPACITY (MAX_GLOB_STRS); LOG_CAPACITY (MAX_PRINT_LINE); LOG_CAPACITY (Max_Strings); LOG_CAPACITY (Min_Crossrefs); LOG_CAPACITY (MIN_PRINT_LINE); LOG_CAPACITY (Pool_Size); LOG_CAPACITY (SINGLE_FN_SPACE); LOG_CAPACITY (Wiz_Fn_Space); FPRINTF (log_file, "\n"); } } /* report_bibtex_capacity() */ /*- **============================================================================ ** report_search_paths() ** ** Report the environment variables and fallback search paths used by ** BibTeX for locating input files. **============================================================================ */ void report_search_paths (void) { #ifndef KPATHSEA /* ** Define a couple of useful macros to simplify reporting of the desired ** information. */ #define REPORT_SEARCH_PATH(_a,_b,_c) \ debug_msg (DBG_SRCH, "Search strategy for %s files:", _a); \ debug_msg (DBG_SRCH, " search path environment variable: %s", NULLCHECK (_b)); \ if (! ISEMPTYSTR (_b)) { \ char *ptr; \ ptr = getenv (_b); \ debug_msg (DBG_SRCH, " %s value: %s", _b, NULLCHECK (ptr)); \ } \ debug_msg (DBG_SRCH, " fallback search path: %s", NULLCHECK (_c)); #define REPORT_SEARCH_FILE(_a,_b,_c) \ debug_msg (DBG_SRCH, "Default %s file:", _a); \ debug_msg (DBG_SRCH, " file name environment variable: %s", NULLCHECK (_b)); \ if (! ISEMPTYSTR (_b)) { \ char *ptr; \ ptr = getenv (_b); \ debug_msg (DBG_SRCH, " %s value: %s", _b, NULLCHECK (ptr)); \ } \ debug_msg (DBG_SRCH, " fallback file name: %s", NULLCHECK (_c)); /* ** Now report the information. */ REPORT_SEARCH_PATH (".aux", AUX_INPUT_ENVVAR, AUX_INPUT_PATH); REPORT_SEARCH_PATH (".bib", BIB_INPUT_ENVVAR, BIB_INPUT_PATH); REPORT_SEARCH_PATH (".bst", BST_INPUT_ENVVAR, BST_INPUT_PATH); REPORT_SEARCH_PATH (".csf", CSF_INPUT_ENVVAR, CSF_INPUT_PATH); REPORT_SEARCH_FILE (".csf", CSF_FILE_ENVVAR, CSF_FILE_NAME); #endif /* ! KPATHSEA */ } /* report_search_paths() */ /*- **============================================================================ ** compute_hash_prime() ** ** We use the algorithm from Knuth's \.{primes.web} to compute ** |hash_prime| as the smallest prime number not less than 85\% ** of |hash_size| (and |>=128|). ** ** This algorithm uses two arrays |primes| and |mult|. We use the ** already allocated |hash_next| and |hash_text| for that purpose. ** **============================================================================ */ #define primes hash_next #define mult hash_text static void compute_hash_prime (void) { Integer32_T Hash_Want = (Hash_Size / 20) * 17; /* 85\% of |hash_size| */ Integer32_T k = 1; /*number of prime numbers $p_i$ in |primes| */ Integer32_T j = 1; /* a prime number candidate */ Integer32_T o = 2; /* number of odd multiples of primes in |mult| */ Integer32_T square = 9; /* $p_o^2$ */ Integer32_T n; /* loop index */ Boolean_T j_prime; /* is |j| a prime? */ debug_msg (DBG_MEM, "Computing Hash_Prime ... "); primes[k] = Hash_Prime = 2; while (Hash_Prime < Hash_Want) { do { j += 2; if (j == square) { mult[o++] = j; j += 2; square = primes[o] * primes[o]; } n = 2; j_prime = TRUE; while ((n < o) && j_prime) { while (mult[n] < j) mult[n] += 2 * primes[n]; if (mult[n++] == j) j_prime = FALSE; } } while (!j_prime); primes[++k] = Hash_Prime = j; } } /*- **============================================================================ ** set_array_sizes() ** ** Allocate memory dynamically for the large arrays whose size is set ** dynamically, depending on the amount memory of memory available. ** ** On virtual memory operating systems, there is not normally a problem ** allocating memory; the array sizes can be predetermined and memory ** allocated at run-time. ** ** Parameter Cmd Standard --big --huge --wolfgang ** ------------------------------------------------------------------ ** Buf_Size *** initialy 20000, increased as required *** ** Hash_Prime *** computed from Hash_Size *** ** Hash_Size *** determined from Max_Strings *** ** Max_Bib_Files *** initialy 20, increased as required *** ** Max_Cites *** initialy 750, increased as required *** ** Max_Ent_Ints *** as required *** ** Max_Ent_Strs *** as required *** ** Max_Fields *** initialy 5000, increased as required *** ** Max_Strings Y 4,000 10,000 19,000 30,000 ** Pool_Size *** initialy 65,000, increased as required *** ** Wiz_Fn_Space *** initialy 3000, increased as required *** ** ------------------------------------------------------------------ ** **============================================================================ */ void set_array_sizes (void) { debug_msg (DBG_MEM, "Setting BibTeX's capacity ... "); Max_Strings = 4000; Min_Crossrefs = 2; if (Flag_big) { Max_Strings = 10000; } if (Flag_huge) { Max_Strings = 19000; } if (Flag_wolfgang) { Max_Strings = 30000; } Buf_Size = BUF_SIZE; Max_Bib_Files = MAX_BIB_FILES; Max_Cites = MAX_CITES; Max_Fields = MAX_FIELDS; if (M_min_crossrefs > 0) Min_Crossrefs = M_min_crossrefs; Pool_Size = POOL_SIZE; if (M_strings > 0) Max_Strings = M_strings; if (Max_Strings < 4000) Max_Strings = 4000; Hash_Size = Max_Strings; if (Hash_Size < 5000) Hash_Size = 5000; Wiz_Fn_Space = WIZ_FN_SPACE; allocate_arrays (); compute_hash_prime (); debug_msg (DBG_MEM, "Hash_Prime = %d, Hash_Size = %d", Hash_Prime, Hash_Size); debug_msg (DBG_MEM, "Buf_Size = %d, Max_Bib_Files = %d", Buf_Size, Max_Bib_Files); debug_msg (DBG_MEM, "Max_Cites = %d, Max_Fields = %d", Max_Cites, Max_Fields); debug_msg (DBG_MEM, "Max_Strings = %d, Pool_Size = %d", Max_Strings, Pool_Size); debug_msg (DBG_MEM, "Min_Crossrefs = %d, Wiz_Fn_Space = %d", Min_Crossrefs, Wiz_Fn_Space); /*- ** Check that the key values are sensible. These checks are stolen ** from initialize(), but the error messages are more informative. */ debug_msg(DBG_MISC, "Sanity checking capacity values ... "); if (Hash_Prime < 128) usage ("Hash_Prime (%d) must be >= 128", Hash_Prime); if (Hash_Prime > Hash_Size) usage ("Hash_Prime (%d) must be <= Hash_Size (%d)", Hash_Prime, Hash_Size); /* ** The original WEB version of BibTeX imposed a maximum value of ** 16321 on Hash_Prime. A WEB constant was defined: ** ** MAX_HASH_VALUE = (Hash_Prime + Hash_Prime - 2 + 127) ** ** but, because WEB constants are limited to 32767, Hash_Prime was ** consequently limited to a maximum of (32767 + 2 - 127) / 2 = 16321. ** ** We're using C #defines, so that limit doesn't apply. The ** following original sanity check is therefore commented out. ** ** if (Hash_Prime >= (16384 - 64)) ** usage ("Hash_Prime (%d) must be < %d", Hash_Prime, (16384-64)); */ if (Max_Strings > Hash_Size) usage ("Max_Strings (%d) must be <= Hash_Size (%d)", Max_Strings, Hash_Size); if (Max_Cites > Max_Strings) usage ("Max_Cites (%d) must be <= Max_Strings (%d)", Max_Cites, Max_Strings); } /* set_array_sizes() */ /*- **============================================================================ ** usage() ** ** Display a helpful message reporting the command line options ** supported by this version of BibTeX. If a message string is ** provided, this is displayed first. **============================================================================ */ void usage (const char *printf_fmt, ...) { va_list printf_args; if (printf_fmt != NULL) { fprintf (stderr, "BibTeXu: "); va_start (printf_args, printf_fmt); vfprintf (stderr, printf_fmt, printf_args); va_end (printf_args); fprintf (stderr, "\n"); } FSO ("\nUsage: bibtexu [options] aux-file\n\n"); FSO (" Valid options are:\n\n"); FSO (" -? --help display this help text\n"); #ifdef DEBUG FSO (" -d --debug TYPE report debugging information. TYPE is one\n"); FSO (" or more of all, csf, io, mem, misc, search.\n"); #endif /* DEBUG */ #ifdef STAT FSO (" -s --statistics report internal statistics\n"); #endif /* STAT */ #ifdef TRACE FSO (" -t --trace report execution tracing\n"); #endif /* TRACE */ FSO (" -v --version report BibTeX version\n\n"); FSO (" -l --language input the option language, ex: -l fr\n"); FSO (" -o --location input the option location, ex: -o fr\n\n"); FSO (" -B --big same as --mstrings 10000\n"); FSO (" -H --huge same as --mstrings 19000\n"); FSO (" -W --wolfgang same as --mstrings 30000\n"); FSO (" -M --min_crossrefs ## set min_crossrefs to ##\n"); FSO (" --mstrings ## allow ## unique strings\n"); debug_msg (DBG_MISC, "calling longjmp (Exit_Program_Flag) ... "); longjmp (Exit_Program_Flag, 1); } /* usage() */ /*- ****************************************************************************** ****************************************************************************** ** ** Functions specifically for 8-bit support. ** ** c8read_csf ** c8initialise ** c8read_lowercase ** c8read_lowupcase ** c8read_uppercase ** c8read_order ** c8report_8bit_handling ** ****************************************************************************** ****************************************************************************** */ #ifdef SUPPORT_8BIT /* ** Useful definitions. */ #define c8is_alpha(c) (isalpha(c) || c > 127) #define c8is_alphanumeric(c) (isalnum(c) || c > 127) #define SORT_LAST 4095 /*- **============================================================================ ** c8initialise () ** ** Initialise BibTeX's handling of 8-bit character sets. The steps are: ** ** o initialise default behaviour for sorting and upper/lowercase ** o if appropriate, read and parse the CS file ** o use CS data to set behaviour for sorting and upper/lowercase ** o update xchr/xord arrays for 8-bit characters. These arrays ** are initialised for ASCII character sets in the original ** initialize() function. Further initialisation for 8-bit ** characters is performed here to minimise "contamination" of ** the original BibTeX code. ** ** We have to deal with three modes of operation: ** ** --traditional - the original BibTeX behaviour ** --8bit - every character with a code > 127 is treated as ** a letter ** default - a CS file is read and parsed to define sorting order ** and how 8-bit characters should be handled **============================================================================ */ void c8initialise (void) { int ascii_case_diff = 'a' - 'A'; int c; int status; /* ** Traditional mode (--traditional, -7) results in identical behaviour ** to the original BibTeX. ** ** o sort order by character code value ('A'=65 ... 'z'=122) ** o upper/lowercase relationships for A..Za..z established ** o no CS file read ** o only characters < 128 allowed ** o no need to update xchr/xord arrays */ if (Flag_7bit) { for (c = 0; c <= 255; c++) { c8order[c] = c; c8lowcase[c] = (UChar_T) c; c8upcase[c] = (UChar_T) c; } for (c = 'A'; c <= 'Z'; c++) { c8lowcase[c] = (UChar_T) (c + ascii_case_diff); c8upcase[c + ascii_case_diff] = (UChar_T) c; } for (c = 128; c <= 255; c++) lex_class[c] = ILLEGAL; } /* ** Raw 8-bit (--8bit, -8). ** ** o sort order by character code value ('A'=65 ... 'z'=122) ** o upper/lowercase relationships for A..Za..z established ** o no CS file read ** o need to update xchr/xord arrays ** o characters > 127 allowed and all treated as type ALPHA */ else if (Flag_8bit) { for (c = 0; c <= 255; c++) { c8order[c] = c; c8lowcase[c] = (UChar_T) c; c8upcase[c] = (UChar_T) c; } for (c = 'A'; c <= 'Z'; c++) { c8lowcase[c] = (UChar_T) (c + ascii_case_diff); c8upcase[c + ascii_case_diff] = (UChar_T) c; } for (c = 128; c <= 255; c++) xchr[c] = (char) c; for (c = 128; c <= 255; c++) xord[xchr[c]] = (ASCIICode_T) c; for (c = 128; c <= 255; c++) lex_class[c] = ALPHA; } /* ** Default initialisation using CS file. ** ** o no sort order defined - all set to weight SORT_LAST ** o upper/lowercase relationships for A..Za..z established ** o only characters < 128 allowed initially ** o a CS file is read and parsed by BibTeX to modify these defaults ** o need to update xchr/xord/lex_class arrays after reading CS file */ else { for (c = 0; c <= 255; c++) { c8order[c] = SORT_LAST; c8lowcase[c] = (UChar_T) c; c8upcase[c] = (UChar_T) c; } c8order[32] = 0; for (c = 'A'; c <= 'Z'; c++) { c8lowcase[c] = (UChar_T) (c + ascii_case_diff); c8upcase[c + ascii_case_diff] = (UChar_T) c; } for (c = 128; c <= 255; c++) xchr[c] = (char) c; for (c = 128; c <= 255; c++) xord[xchr[c]] = (ASCIICode_T) c; for (c = 128; c <= 255; c++) lex_class[c] = ILLEGAL; /* ** Read the CS file. If it was read and parsed OK, update the ** definition of 8-bit characters. If an 8-bit character is defined ** in any section of the CS file, it is treated as type ALPHA. */ if ((status = c8read_csf ()) == TRUE) { for (c = 128; c <= 255; c++) if ((c8order[c] != SORT_LAST) || (c8lowcase[c] != c) || (c8upcase[c] != c)) lex_class[c] = ALPHA; } } /* end if (Flag_7bit) */ /* ** If the CSF debugging option has been selected, report results. */ if ((Flag_debug & DBG_CSF)) c8report_8bit_handling (); } /* c8initialise () */ /*- **============================================================================ ** c8read_csf() ** ** Read the Case and Sorting definitions (CS) File. Steps taken are: ** ** o determine which CS file should be opened ** o open the CS file ** o look for valid CS file sections (\lowupcase, \lowercase, ** \uppercase, \order) and delegate parsing of each section to the ** appropriate function ** o close the CS file ** ** Returns TRUE if a CS file was successfully read and parsed, FALSE ** otherwise. **============================================================================ */ int c8read_csf (void) { int c, i; int in_comment; #define SX_BUF_SIZE 15 /* a section name: "order", "uppercase", "lowercase", or "lowupcase". */ char sx[SX_BUF_SIZE + 1]; #ifndef KPATHSEA char *value; #endif /* ** Construct the name of the CS file to be used: ** ** 1. If the --csfile option was specified, use its value. ** or ** 2. If CSF_FILE_ENVVAR is defined to a non-empty value, it ** contains the name of an environment variable. The value of ** this environment variable will be used as the default CS file. */ if (Str_csfile == NULL) { #ifdef KPATHSEA /* FIXME: this default value should be stored in texmf.in */ Str_csfile = xstrdup("88591lat.csf"); #else if (strlen (CSF_FILE_ENVVAR) != 0) { debug_msg (DBG_CSF, "c8read_csf: --csfile not set, checking '%s'", CSF_FILE_ENVVAR); value = getenv (CSF_FILE_ENVVAR); if (value == NULL) debug_msg (DBG_CSF, "c8read_csf: %s = `NULL'", CSF_FILE_ENVVAR); else debug_msg (DBG_CSF, "c8read_csf: %s = `%s'", CSF_FILE_ENVVAR, value); /* ** If the environment variable has a non-empty value, use it ** as the file specifaction for the default CS file. */ if ((value != NULL) && (*value != '\0')) Str_csfile = strdup (value); else { PRINT_LN ("Warning: cannot open CS file: --csfile not specfied"); PRINT_LN2 ("and environment variable %s has no value.", CSF_FILE_ENVVAR); return FALSE; } } else { PRINT_LN ("Warning: cannot open CS file: --csfile not specified"); PRINT_LN ("and default environment variable not specified."); return FALSE; } /* if (strlen (CSF_FILE_ENVVAR) != 0) */ #endif /* KPATHSEA */ } /* if (Str_csfile == NULL) */ /* ** Make sure that we have ended up with a CS file name. If not, ** return FALSE; */ if ((Str_csfile == NULL) || (*Str_csfile == '\0')) { PRINT_LN ("Warning: cannot open CS file: empty --csfile value specified."); return FALSE; } /* ** If the CS file name doesn't contain a '.', append ".csf". */ free (name_of_file); name_of_file = (unsigned char *) mymalloc (strlen (Str_csfile) + 5, "name_of_file"); strcpy (name_of_file, Str_csfile); if (strchr (name_of_file, '.') == NULL) strcat (name_of_file, ".csf"); name_length = strlen (name_of_file); debug_msg (DBG_CSF, "c8read_csf: trying to open CS file `%s' ...", name_of_file); /* ** Attempt to open the CS file, using the CS file search path if ** necessary. If the open fails, return FALSE. */ if (! a_open_in (&c8_cs_file, CSF_FILE_SEARCH_PATH)) { PRINT_LN2 ("Error: cannot open CS file: %s", name_of_file); return FALSE; } PRINT_LN2 ("The 8-bit codepage and sorting file: %s", name_of_file); /* ** The main loop for reading the CS file. */ c8_line = 1; while (! feof (c8_cs_file)) { /* ** Read the CS file until a '\\' character is found, denoting the ** start of a major section. Comments begin with a '%' and ** anything else on the same line is ignored. */ in_comment = FALSE; do { c = getc (c8_cs_file); if (c == '\n') { ++c8_line; in_comment = FALSE; } if (c == '%') in_comment = TRUE; if ((c == '\\') && (in_comment == FALSE)) break; } while (!feof (c8_cs_file)); /* ** If we break out of the do loop on EOF, there were no more ** sections in the CS file. Exit the main reading loop. */ if (feof (c8_cs_file)) break; /* ** After '\', a section name must be found. This name is a word ** composed only of lower case ASCII letters. */ i = 0; do { c = getc (c8_cs_file); if ((c >= 'a') && (c <= 'z')) sx[i++] = c; else break; } while (!feof (c8_cs_file) && (i < SX_BUF_SIZE)); sx[i] = '\0'; /* ** A '{' should follow the section name, but it could be preceeded ** by whitespace, comments or newlines. */ if (c != '{') do { if (c == '\n') { ++c8_line; in_comment = FALSE; } if (c == '%') in_comment = TRUE; if ((c == '{') && (in_comment == FALSE)) break; c = getc (c8_cs_file); } while (!feof (c8_cs_file)); /* ** The major sections supported in the CS file are: \order{}, ** \uppercase{}, \lowercase{} and \lowupcase{}. Anything else will ** be ignored. Known sections are processed until they terminate ** and then the loop starts again. */ if (strcmp (sx, "order") == 0) c8read_order (); else if (strcmp (sx, "uppercase") == 0) c8read_uppercase (); else if (strcmp (sx, "lowercase") == 0) c8read_lowercase (); else if (strcmp (sx, "lowupcase") == 0) c8read_lowupcase (); else { PRINT_LN2 ("Unknown section on line in CS file %s", Str_csfile); PRINT_LN3 ("%04d: \\%s", c8_line, buffer); } } /* while (! feof (c8_cs_file)) */ /* ** Finished reading, close the CS file then return TRUE. */ close_file (c8_cs_file); return TRUE; } /* c8read_csf () */ /*- **============================================================================ ** c8read_lowercase() ** ** Read and parse the \lowercase section of the CS file. This section is ** used to define the upper -> lower case relationship of pairs of specified ** characters. It should normally only be used if the relationship ** isn't symmetrical - use \lowupcase if it is. ** ** The syntax of the \lowercase section is: ** ** \lowercase{ ** % Comment begins with a percent sign ** ** ... ** ** } ** ** Notes: ** ** o characters can be entered normally, or in TeX notation for ** character codes, i.e. ^^XX, where XX is the hexadecimal value. ** ** o reading of the \lowercase section ends when the first '}' character ** is reached, so '}' can't be included in a case relationship pair. ** You can't use ^^7d either. ** ** o '%' is used to introduce a trailing comment, so '%' can't be included ** in the \lowercase section. You can't use ^^25 either. ** ** o you cannot redefine the lower case equivalent of an ASCII character ** (code < 128). In other words, all "left hand" characters in the ** relationship pairs must have codes > 127. **============================================================================ */ static void c8read_lowercase (void) { int c; int uppercase_val; debug_msg (DBG_CSF, "reading the \\lowercase section ... "); uppercase_val = -1; /* ** Keep reading characters until the end of the section is encountered ** at a '}' or EOF is reached. */ c = getc (c8_cs_file); while ((c != '}') && !feof (c8_cs_file)) { /* ** Characters may be specified using the TeX syntax for the ** 8-bit code, i.e. ^^XX, where XX is the hexadecimal value. ** We should really check the result of this fscanf(). Read the ** character code and then start the while loop again. */ if (c == '^') fscanf (c8_cs_file, "^%x", &c); /* ** If we have reached the end of a line, simply increment the ** line count. */ if (c == '\n') { c8_line++; } /* ** If we encounter a '%', it signifies the start of a comment. ** Ignore characters until the end of line is reached. */ else if (c == '%') { do { c = getc(c8_cs_file); } while ((c != '\n') && (! feof( c8_cs_file))); continue; } /* ** The normal case is for alpha characters to be included in the ** case relationship. Alpha characters are assumed to be ASCII ** alpha (A..Za..z) plus any character with a code > 127. */ else if (c8is_alpha (c)) { /* ** The case relationship consists of a pair of alpha characters ** separated by whitespace. In the \lowercase section, the pair ** is in the order . We ** must remember which character we are looking for - this is ** achieved by setting uppercase_val to -1 when we are ** looking for the first character of a pair. ** ** If uppercase_val is < 0, we treat the current character as ** the upper case member of the pair and set uppercase_val ** accordingly. */ if (uppercase_val < 0) uppercase_val = c; else { /* ** We are not allowed to redefine the lower case ** equivalent of an ASCII character. */ if (uppercase_val < 127) { PRINT_LN2 ("Error: attempt to redefine lower case of " "an ASCII character [0x%02x]", uppercase_val); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } /* ** All OK, so set the appropriate element of the c8lowcase ** array and reset the value of uppercase_val to signify ** that we are looking for the next pair. */ else { c8lowcase[uppercase_val] = c; uppercase_val = -1; } } } /* end if */ /* ** Get the next character from the file and start the loop again. */ c = getc (c8_cs_file); } /* end while */ /* ** The only normal reason for breaking out of the while loop is that ** we encountered '}' at the end of the \lowercase section. Two ** conditions should be true: ** ** (uppercase_val = -1) - there is an unmatched character ** (c == '}') - the terminating '}' has been read */ if (uppercase_val != -1){ PRINT_LN ("Error: unmatched character pair in \\lowercase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } if (c != '}') { PRINT_LN ("Error: unexpected end of file in \\lowercase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } debug_msg (DBG_CSF, "finished reading the \\lowercase section."); } /* c8read_lowercase () */ /*- **============================================================================ ** c8read_lowupcase() ** ** Read and parse the \lowupcase section of the CS file. This section is ** used to define the lower -> upper and upper -> lower case relationship ** of pairs of specified characters. It is only used if the relationship ** is symmetrical - use \lowercase or \uppercase if it isn't. ** ** The syntax of the \lowupcase section is: ** ** \uppercase{ ** % Comment begins with a percent sign ** ** ... ** ** } ** ** Notes: ** ** o characters can be entered normally, or in TeX notation for ** character codes, i.e. ^^XX, where XX is the hexadecimal value. ** ** o reading of the \lowupcase section ends when the first '}' character ** is reached, so '}' can't be included in a case relationship pair. ** You can't use ^^7d either. ** ** o '%' is used to introduce a trailing comment, so '%' can't be included ** in the \lowupcase section. You can't use ^^25 either. ** ** o you cannot redefine the lower or upper case equivalent of an ASCII ** character (code < 128). In other words, all characters in the ** relationship pairs must have codes > 127. **============================================================================ */ static void c8read_lowupcase (void) { int c; int lowercase_val; debug_msg (DBG_CSF, "reading the \\lowupcase section ... "); lowercase_val = -1; /* ** Keep reading characters until the end of the section is encountered ** at a '}' or EOF is reached. */ c = getc (c8_cs_file); while ((c != '}') && !feof (c8_cs_file)) { /* ** Characters may be specified using the TeX syntax for the ** 8-bit code, i.e. ^^XX, where XX is the hexadecimal value. ** We should really check the result of this fscanf(). */ if (c == '^') fscanf (c8_cs_file, "^%x", &c); /* ** If we have reached the end of a line, simply increment the ** line count. */ if (c == '\n') { c8_line++; } /* ** If we encounter a '%', it signifies the start of a comment, ** unless it was translated from a ^^xx sequence. ** Ignore characters until the end of line is reached. */ else if (c == '%') { do { c = getc(c8_cs_file); } while ((c != '\n') && (! feof( c8_cs_file))); continue; } /* ** The normal case is for alpha characters to be included in the ** case relationship. Alpha characters are assumed to be ASCII ** alpha (A..Za..z) plus any character with a code > 127. */ else if (c8is_alpha (c)) { /* ** The case relationship consists of a pair of alpha characters ** separated by whitespace. In the \lowupcase section, the pair ** is in the order . We ** must remember which character we are looking for - this is ** achieved by setting lowercase_val to -1 when we are ** looking for the first character of a pair. ** ** If lowercase_val is < 0, we treat the current character as ** the lower case member of the pair and set lowercase_val ** accordingly. */ if (lowercase_val < 0) lowercase_val = c; else { /* ** We are not allowed to redefine the lower or upper case ** equivalent of an ASCII character. */ if (lowercase_val < 127) { PRINT_LN2 ("Error: attempt to redefine upper case of " "an ASCII character [0x%02x]", lowercase_val); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } else if (c < 127) { PRINT_LN2 ("Error: attempt to redefine lower case of " "an ASCII character [0x%02x]", c); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } /* ** All OK, so set the appropriate element of the c8lowcase ** and c8upcase arrays, then reset the value of lowercase_val ** to signify that we are looking for the next pair. */ else { c8lowcase[c] = lowercase_val; c8upcase[lowercase_val] = c; lowercase_val = -1; } } } /* end if */ /* ** Get the next character from the file and start the loop again. */ c = getc (c8_cs_file); } /* end while */ /* ** The only normal reason for breaking out of the while loop is that ** we encountered '}' at the end of the \lowupcase section. Two ** conditions should be true: ** ** (lowercase_val = -1) - there is an unmatched character ** (c == '}') - the terminating '}' has been read */ if (lowercase_val != -1){ PRINT_LN ("Error: unmatched character pair in \\lowupcase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } if (c != '}') { PRINT_LN ("Error: unexpected end of file in \\lowupcase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } debug_msg (DBG_CSF, "finished reading the \\lowupcase section."); } /* c8read_lowupcase () */ /*- **============================================================================ ** c8read_order() ** ** Read and parse the \order section of the CS file. This section is ** used to define the sorting order of characters in the 8-bit character ** set. ** ** The syntax of the \order section is: ** ** \order{ ** % Comment begins with a percent sign ** ** - ** _ ** ... ** ** } ** ** Notes: ** ** o characters can be entered normally, or in TeX notation for ** character codes, i.e. ^^XX, where XX is the hexadecimal value. ** ** o reading of the \order section ends when the first '}' character ** is reached, so '}' can't be included in the \order section. You ** can't use ^^7d either. ** ** o '%' is used to introduce a trailing comment, so '%' can't be included ** in the \order section. You can't use ^^25 either. ** ** o All characters on the same line are given the same sorting weight. ** ** o The construct is used to denote that ** all characters in the range to should be given the ** same sorting weight. For example, "A _ Z a _ z" would cause all ** ASCII alphabetical characters to have the same sorting weight and ** would be equivalent to placing all 26 characters on the same line. ** ** o The construct is used to denote that all ** characters in the range to should be given an ** ascending set of sorting weights, starting with and ** ending with . For example, "A - Z" would cause all ** upper case ASCII alphabetical characters to be sorted in ** ascending order and would be equivalent to placing 'A' on the ** first line, 'B' on the second, through to 'Z' on the 26th line. ** ** o the characters at the beginning of the order section are given a ** lower sorting weight than characters occuring later. When ** sorting alphabetically, characters with the lowest weight come ** first. ** ** o all characters not in the \order section (including ASCII characters) ** are given the same very high sorting weight to ensure that they ** come last when sorting alphabetically. **============================================================================ */ static void c8read_order (void) { int c, i; int c_previous = 0; int c_previous_previous = 0; int seen_chars; debug_msg (DBG_CSF, "reading the \\order section ... "); sort_weight = 1; seen_chars = FALSE; /* ** Keep reading characters until the end of the section is ** encountered at a '}' or EOF is reached. */ c = getc (c8_cs_file); while ((c != '}') && (! feof (c8_cs_file))) { /* ** If we have reached the end of a line, the next line denotes ** characters with an increased sorting weight. Any other ** characters with a value less than ' ' are ignored. */ if (c == '\n') { if (seen_chars) sort_weight++; c8_line++; seen_chars = FALSE; } else if (c < ' ') { debug_msg (DBG_CSF, "ignoring char 0x%02X on line %d of CS file", c, c8_line); } else if (c > ' ') { /* ** Characters may be specified using the TeX syntax for the ** 8-bit code, i.e. ^^XX, where XX is the hexadecimal value. ** We should really check the result of this fscanf(). Read the ** character code and then start the while loop again. */ if (c == '^') fscanf (c8_cs_file, "^%x", &c); /* ** If we encounter a '%', it signifies the start of a comment. ** Ignore characters until the end of line is reached. */ if (c == '%') { do { c = getc(c8_cs_file); } while ((c != '\n') && (! feof( c8_cs_file))); continue; } /* ** The normal case is for alpha characters to be included ** in the sorting sequence. Alpha characters are ASCII alpha ** plus any character with a code > 127. */ else if (c8is_alphanumeric (c) || c == ' ') { /* ** If the previous char was '-', we expect this char to ** terminate a "X-Y" sequence. The character before ** the '-' must also be an alpha type. The characters in ** the sequence are assigned an increasing sort weight. */ if (c_previous == '-') { if (c8is_alphanumeric (c_previous_previous)) { for (i = c_previous_previous; i < c; i++) c8order[i] = sort_weight++; seen_chars = TRUE; } else { PRINT_LN ("Error: non-alphanumeric character " "starts X-Y sequence"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } /* ** If the previous char was '_', we expect this char to ** terminate a "X_Y" sequence. The character before ** the '_' must also be an alpha type. The characters in ** the sequence are assigned the same sort weight. */ } else if (c_previous == '_') { if (c8is_alphanumeric (c_previous_previous)) { for (i = c_previous_previous; i < c; i++) c8order[i] = sort_weight; seen_chars = TRUE; } else { PRINT_LN ("Error: non-alphanumeric character " "starts X_Y sequence"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } } c8order[c] = sort_weight; seen_chars = TRUE; } /* ** The only other non-alpha characters allowed are '-' & '_'. */ else if ((c != '-') && (c != '_')) { PRINT_LN ("Error: only '-' or '_' may follow an " "alpha character"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } /* ** Keep an up-to-date note of the two previous values of c. */ c_previous_previous = c_previous; c_previous = c; } /* end if */ /* ** Get the next character and start the loop again. */ c = getc (c8_cs_file); } /* end while */ /* ** If c isn't '}', we ran into EOF. */ if (c != '}') { PRINT_LN ("Error: unexpected end of file in \\order section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } debug_msg (DBG_CSF, "finished reading the \\order section."); } /* c8read_order () */ /*- **============================================================================ ** c8read_uppercase() ** ** Read and parse the \uppercase section of the CS file. This section is ** used to define the lower -> upper case relationship of pairs of specified ** characters. It should normally only be used if the relationship ** isn't symmetrical - use \lowupcase if it is. ** ** The syntax of the \uppercase section is: ** ** \uppercase{ ** % Comment begins with a percent sign ** ** ... ** ** } ** ** Notes: ** ** o characters can be entered normally, or in TeX notation for ** character codes, i.e. ^^XX, where XX is the hexadecimal value. ** ** o reading of the \uppercase section ends when the first '}' character ** is reached, so '}' can't be included in a case relationship pair. ** You can't use ^^7d either. ** ** o '%' is used to introduce a trailing comment, so '%' can't be included ** in the \uppercase section. You can't use ^^25 either. ** ** o you cannot redefine the upper case equivalent of an ASCII character ** (code < 128). In other words, all "left hand" characters in the ** relationship pairs must have codes > 127. **============================================================================ */ static void c8read_uppercase (void) { int c; int lowercase_val; debug_msg (DBG_CSF, "reading the \\uppercase section ... "); lowercase_val = -1; /* ** Keep reading characters until the end of the section is encountered ** at a '}' or EOF is reached. */ c = getc (c8_cs_file); while ((c != '}') && (! feof (c8_cs_file))) { /* ** Characters may be specified using the TeX syntax for the ** 8-bit code, i.e. ^^XX, where XX is the hexadecimal value. ** We should really check the result of this fscanf(). */ if (c == '^') fscanf (c8_cs_file, "^%x", &c); /* ** If we have reached the end of a line, simply increment the ** line count. */ if (c == '\n') { c8_line++; } /* ** If we encounter a '%', it signifies the start of a comment. ** Ignore characters until the end of line is reached. */ else if (c == '%') { do { c = getc(c8_cs_file); } while ((c != '\n') && (! feof( c8_cs_file))); continue; } /* ** The normal case is for alpha characters to be included in the ** case relationship. Alpha characters are assumed to be ASCII ** alpha (A..Za..z) plus any character with a code > 127. */ else if (c8is_alpha (c)) { /* ** The case relationship consists of a pair of alpha characters ** separated by whitespace. In the \uppercase section, the pair ** is in the order . We ** must remember which character we are looking for - this is ** achieved by setting lowercase_val to -1 when we are ** looking for the first character of a pair. ** ** If lowercase_val is < 0, we treat the current character as ** the lower case member of the pair and set lowercase_val ** accordingly. */ if (lowercase_val < 0) lowercase_val = c; else { /* ** We are not allowed to redefine the upper case ** equivalent of an ASCII character. */ if (lowercase_val < 127) { PRINT_LN2 ("Error: attempt to redefine upper case of " "an ASCII character [0x%02x]", lowercase_val); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } /* ** All OK, so set the appropriate element of the c8lowcase ** array and reset the value of lowercase_val to signify ** that we are looking for the next pair. */ else { c8upcase[lowercase_val] = c; lowercase_val = -1; } } } /* end if */ /* ** Get the next character from the file and start the loop again. */ c = getc (c8_cs_file); } /* end while */ /* ** The only normal reason for breaking out of the while loop is that ** we encountered '}' at the end of the \uppercase section. Two ** conditions should be true: ** ** (lowercase_val = -1) - there is an unmatched character ** (c == '}') - the terminating '}' has been read */ if (lowercase_val != -1){ PRINT_LN ("Error: unmatched character pair in \\uppercase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } if (c != '}') { PRINT_LN ("Error: unexpected end of file in \\uppercase section"); PRINT_LN3 ("Context: line %04d: of CS file %s", c8_line, Str_csfile); } debug_msg (DBG_CSF, "finished reading the \\uppercase section."); } /* c8read_uppercase () */ /* **============================================================================ ** c8report_8bit_handling() ** ** Report the internal status of BibTeX's 8-bit character set handling. The ** information reported is: ** ** o 8-bit characters defined as type ALPHA ** o character codes with upper case equivalents ** o character codes with lower case equivalents ** o the character codes in sorting weight order **============================================================================ */ void c8report_8bit_handling (void) { int c; int column; int weight; /* ** Exit immediately if the CSF debugging option hasn't been selected. */ if ((Flag_debug & DBG_CSF) == 0) return; /* ** Report the 8-bit characters defined as type ALPHA, 16 to a row. */ fprintf (stderr, "\nD-CSF: 8-bit ALPHA characters\n"); fprintf (stderr, "D-CSF: ----------------------\n"); for (c = 128; c <= 255; c += 16) { fprintf (stderr, "D-CSF: %02x: ", c); for (column = 0; column < 16; column++) { if (lex_class[c + column] == ALPHA) fprintf (stderr, "%c ", c + column); else fputs (". ", stderr); } fputc ('\n', stderr); } /* ** Report the lower / upper case relationships, three pairs to a row. */ fprintf (stderr, "\nD-CSF: Characters with upper case equivalents\n"); fprintf (stderr, "D-CSF: --------------------------------------"); column = 0; for (c = 1; c <= 255; c++) if (c8upcase[c] != c) { if ((column % 3) == 0) fprintf (stderr, "\nD-CSF: %c [%02x] <<< %c [%02x]", c, (int) c, c8upcase[c], (int) c8upcase[c]); else fprintf (stderr, " %c [%02x] <<< %c [%02x]", c, (int) c, c8upcase[c], (int) c8upcase[c]); ++column; } /* ** Report the upper / lower case relationships, three pairs to a row. */ fprintf (stderr, "\n\nD-CSF: Characters with lower case equivalents\n"); fprintf (stderr, "D-CSF: --------------------------------------"); column = 0; for (c = 1; c <= 255; c++) if (c8lowcase[c] != c) { if ((column % 3) == 0) fprintf (stderr, "\nD-CSF: %c [%02x] >>> %c [%02x]", c, (int) c, c8lowcase[c], (int) c8lowcase[c]); else fprintf (stderr, " %c [%02x] >>> %c [%02x]", c, (int) c, c8lowcase[c], (int) c8lowcase[c]); ++column; } /* ** Report character codes in sorting weight order. If BibTeX is ** operating in --traditional or --8bit mode, sorting order is simply ** character code order. In that case, just give an abbreviated ** summary. */ fprintf (stderr, "\n\nD-CSF: Characters in sorting order\n"); fprintf (stderr, "D-CSF: ---------------------------\n"); if (Flag_7bit || Flag_8bit) { fprintf (stderr, "D-CSF: 00: [00]\n"); fprintf (stderr, "D-CSF: 01: [01]\n"); fprintf (stderr, "D-CSF: .. ....\n"); fprintf (stderr, "D-CSF: 41: A [41]\n"); fprintf (stderr, "D-CSF: .. ....\n"); fprintf (stderr, "D-CSF: 5a: Z [5a]\n"); fprintf (stderr, "D-CSF: .. ....\n"); fprintf (stderr, "D-CSF: 61: a [61]\n"); fprintf (stderr, "D-CSF: .. ....\n"); fprintf (stderr, "D-CSF: 7a: z [7a]\n"); fprintf (stderr, "D-CSF: .. ....\n"); fprintf (stderr, "D-CSF: fe: [fe]\n"); fprintf (stderr, "D-CSF: ff: [ff]\n\n"); } /* ** When a CS file has been used, sort_weight will be set to the value of ** the highest sorting weight. Report every character with a given ** sorting weight, for 0 <= weight < sort_weight. */ else { for (weight = 0; weight < sort_weight; weight++) { fprintf (stderr, "D-CSF: %02x: ", weight); for (c = 0; c <= 255; c++) { if (c8order[c] == weight) fprintf (stderr, "%c [%02x] ", c, c); } fputc ('\n', stderr); } fprintf (stderr, "D-CSF: (All other characters are sorted " "equally after any of the above.)\n\n"); } } /* c8report_8bit_handling() */ #endif /* SUPPORT_8BIT */