# Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2024 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \
	$(top_srcdir)/m4/kpse-common.m4 \
	$(top_srcdir)/m4/kpse-cxx-hack.m4 \
	$(top_srcdir)/m4/kpse-freetype2-flags.m4 \
	$(top_srcdir)/m4/kpse-gd-flags.m4 \
	$(top_srcdir)/m4/kpse-gmp-flags.m4 \
	$(top_srcdir)/m4/kpse-graphite2-flags.m4 \
	$(top_srcdir)/m4/kpse-harfbuzz-flags.m4 \
	$(top_srcdir)/m4/kpse-icu-flags.m4 \
	$(top_srcdir)/m4/kpse-kpathsea-flags.m4 \
	$(top_srcdir)/m4/kpse-libpaper-flags.m4 \
	$(top_srcdir)/m4/kpse-libpng-flags.m4 \
	$(top_srcdir)/m4/kpse-lt-hack.m4 \
	$(top_srcdir)/m4/kpse-mktex.m4 \
	$(top_srcdir)/m4/kpse-mpfi-flags.m4 \
	$(top_srcdir)/m4/kpse-mpfr-flags.m4 \
	$(top_srcdir)/m4/kpse-options.m4 \
	$(top_srcdir)/m4/kpse-pixman-flags.m4 \
	$(top_srcdir)/m4/kpse-pkgs.m4 \
	$(top_srcdir)/m4/kpse-potrace-flags.m4 \
	$(top_srcdir)/m4/kpse-pplib-flags.m4 \
	$(top_srcdir)/m4/kpse-ptexenc-flags.m4 \
	$(top_srcdir)/m4/kpse-setup.m4 \
	$(top_srcdir)/m4/kpse-teckit-flags.m4 \
	$(top_srcdir)/m4/kpse-warnings.m4 \
	$(top_srcdir)/m4/kpse-web2c.m4 $(top_srcdir)/m4/kpse-win32.m4 \
	$(top_srcdir)/m4/kpse-xpdf-flags.m4 \
	$(top_srcdir)/m4/kpse-zlib-flags.m4 \
	$(top_srcdir)/m4/kpse-zziplib-flags.m4 \
	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
	$(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
	$(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \
	$(top_srcdir)/version.ac \
	$(top_srcdir)/utils/autosp/ac/withenable.ac \
	$(top_srcdir)/utils/axodraw2/ac/withenable.ac \
	$(top_srcdir)/utils/devnag/ac/withenable.ac \
	$(top_srcdir)/utils/lacheck/ac/withenable.ac \
	$(top_srcdir)/utils/m-tx/ac/withenable.ac \
	$(top_srcdir)/utils/pmx/ac/withenable.ac \
	$(top_srcdir)/utils/ps2eps/ac/withenable.ac \
	$(top_srcdir)/utils/t1utils/ac/withenable.ac \
	$(top_srcdir)/utils/texdoctk/ac/withenable.ac \
	$(top_srcdir)/utils/tpic2pdftex/ac/withenable.ac \
	$(top_srcdir)/utils/vlna/ac/withenable.ac \
	$(top_srcdir)/utils/xindy/ac/withenable.ac \
	$(top_srcdir)/utils/xindy/ac/xindy.ac \
	$(top_srcdir)/utils/xindy/ac/clisp.ac \
	$(top_srcdir)/utils/xml2pmx/ac/withenable.ac \
	$(top_srcdir)/utils/xpdfopen/ac/withenable.ac \
	$(top_srcdir)/texk/web2c/ac/withenable.ac \
	$(top_srcdir)/texk/web2c/ac/web2c.ac \
	$(top_srcdir)/texk/afm2pl/ac/withenable.ac \
	$(top_srcdir)/texk/bibtex-x/ac/withenable.ac \
	$(top_srcdir)/texk/bibtex-x/ac/bibtex-x.ac \
	$(top_srcdir)/texk/chktex/ac/withenable.ac \
	$(top_srcdir)/texk/cjkutils/ac/withenable.ac \
	$(top_srcdir)/texk/detex/ac/withenable.ac \
	$(top_srcdir)/texk/dtl/ac/withenable.ac \
	$(top_srcdir)/texk/dvi2tty/ac/withenable.ac \
	$(top_srcdir)/texk/dvidvi/ac/withenable.ac \
	$(top_srcdir)/texk/dviljk/ac/withenable.ac \
	$(top_srcdir)/texk/dviout-util/ac/withenable.ac \
	$(top_srcdir)/texk/dvipdfm-x/ac/withenable.ac \
	$(top_srcdir)/texk/dvipng/ac/withenable.ac \
	$(top_srcdir)/texk/dvipng/ac/dvipng.ac \
	$(top_srcdir)/texk/dvipos/ac/withenable.ac \
	$(top_srcdir)/texk/dvipsk/ac/withenable.ac \
	$(top_srcdir)/texk/dvisvgm/ac/withenable.ac \
	$(top_srcdir)/texk/gregorio/ac/withenable.ac \
	$(top_srcdir)/texk/gsftopk/ac/withenable.ac \
	$(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \
	$(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \
	$(top_srcdir)/texk/makeindexk/ac/withenable.ac \
	$(top_srcdir)/texk/makejvf/ac/withenable.ac \
	$(top_srcdir)/texk/mendexk/ac/withenable.ac \
	$(top_srcdir)/texk/musixtnt/ac/withenable.ac \
	$(top_srcdir)/texk/ps2pk/ac/withenable.ac \
	$(top_srcdir)/texk/psutils/ac/withenable.ac \
	$(top_srcdir)/texk/seetexk/ac/withenable.ac \
	$(top_srcdir)/texk/tex4htk/ac/withenable.ac \
	$(top_srcdir)/texk/ttf2pk2/ac/withenable.ac \
	$(top_srcdir)/texk/ttfdump/ac/withenable.ac \
	$(top_srcdir)/texk/upmendex/ac/withenable.ac \
	$(top_srcdir)/texk/xdvik/ac/withenable.ac \
	$(top_srcdir)/texk/xdvik/ac/xdvik.ac \
	$(top_srcdir)/texk/texlive/ac/withenable.ac \
	$(top_srcdir)/texk/texlive/ac/texlive.ac \
	$(top_srcdir)/libs/pplib/ac/withenable.ac \
	$(top_srcdir)/libs/harfbuzz/ac/withenable.ac \
	$(top_srcdir)/libs/icu/ac/withenable.ac \
	$(top_srcdir)/libs/teckit/ac/withenable.ac \
	$(top_srcdir)/libs/graphite2/ac/withenable.ac \
	$(top_srcdir)/libs/zziplib/ac/withenable.ac \
	$(top_srcdir)/libs/xpdf/ac/withenable.ac \
	$(top_srcdir)/libs/mpfi/ac/withenable.ac \
	$(top_srcdir)/libs/mpfr/ac/withenable.ac \
	$(top_srcdir)/libs/gmp/ac/withenable.ac \
	$(top_srcdir)/libs/cairo/ac/withenable.ac \
	$(top_srcdir)/libs/pixman/ac/withenable.ac \
	$(top_srcdir)/libs/gd/ac/withenable.ac \
	$(top_srcdir)/libs/potrace/ac/withenable.ac \
	$(top_srcdir)/libs/freetype2/ac/withenable.ac \
	$(top_srcdir)/libs/libpng/ac/withenable.ac \
	$(top_srcdir)/libs/libpaper/ac/withenable.ac \
	$(top_srcdir)/libs/luajit/ac/withenable.ac \
	$(top_srcdir)/libs/lua53/ac/withenable.ac \
	$(top_srcdir)/libs/zlib/ac/withenable.ac \
	$(top_srcdir)/texk/ptexenc/ac/withenable.ac \
	$(top_srcdir)/texk/kpathsea/ac/withenable.ac \
	$(top_srcdir)/texk/kpathsea/ac/mktex.ac \
	$(top_srcdir)/texk/kpathsea/ac/kpathsea.ac \
	$(top_srcdir)/texk/ptexenc/ac/ptexenc.ac \
	$(top_srcdir)/libs/zlib/ac/zlib.ac \
	$(top_srcdir)/libs/libpaper/ac/libpaper.ac \
	$(top_srcdir)/libs/libpng/ac/libpng.ac \
	$(top_srcdir)/libs/freetype2/ac/freetype2.ac \
	$(top_srcdir)/libs/potrace/ac/potrace.ac \
	$(top_srcdir)/libs/gd/ac/gd.ac \
	$(top_srcdir)/libs/pixman/ac/pixman.ac \
	$(top_srcdir)/libs/cairo/ac/cairo.ac \
	$(top_srcdir)/libs/gmp/ac/gmp.ac \
	$(top_srcdir)/libs/mpfr/ac/mpfr.ac \
	$(top_srcdir)/libs/xpdf/ac/xpdf.ac \
	$(top_srcdir)/libs/zziplib/ac/zziplib.ac \
	$(top_srcdir)/libs/graphite2/ac/graphite2.ac \
	$(top_srcdir)/libs/teckit/ac/teckit.ac \
	$(top_srcdir)/libs/icu/ac/icu.ac \
	$(top_srcdir)/libs/harfbuzz/ac/harfbuzz.ac \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/am/dist_hook.am \
	$(srcdir)/am/recurse.am $(top_srcdir)/build-aux/ar-lib \
	$(top_srcdir)/build-aux/compile \
	$(top_srcdir)/build-aux/config.guess \
	$(top_srcdir)/build-aux/config.sub \
	$(top_srcdir)/build-aux/install-sh \
	$(top_srcdir)/build-aux/ltmain.sh \
	$(top_srcdir)/build-aux/missing ChangeLog README \
	build-aux/ar-lib build-aux/compile build-aux/config.guess \
	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
	build-aux/ltmain.sh build-aux/missing build-aux/texinfo.tex \
	build-aux/ylwrap
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
      ; rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
GZIP_ENV = -9
DIST_ARCHIVES = $(distdir).tar.xz
DIST_TARGETS = dist-xz
# Exists only to be overridden by the user if desired.
AM_DISTCHECK_DVI_TARGET = dvi
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
ACLOCAL = @ACLOCAL@ --force
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CONF_SUBDIRS = @CONF_SUBDIRS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
FT2_CONFIG = @FT2_CONFIG@
GREP = @GREP@
ICU_CONFIG = @ICU_CONFIG@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAKE_SUBDIRS = @MAKE_SUBDIRS@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
WARNING_CFLAGS = @WARNING_CFLAGS@
WARNING_CXXFLAGS = @WARNING_CXXFLAGS@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_DISTCHECK_CONFIGURE_FLAGS = -C
distuninstallcheck_listfiles = find . -type f -o -type l -print
distcleancheck_listfiles = find . -type f -o -type l -print
EXTRA_DIST = \
	Build \
	README.0overview \
	README.1prerequisites \
	README.2building \
	README.3installing \
	README.4layout \
	README.5configure \
	README.6cross \
	README.7coding \
	build-aux/README.TL \
	m4/ChangeLog \
	m4/README \
	reautoconf

NEVER_DIST = `find . $(NEVER_NAMES)`
NEVER_NAMES = -name .svn
NEVER_NAMES_SUB = -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)'
NEVER_NAMES_LT = -o -name .libs -o -name '*.lo'

# Files not to be distributed
SUBDIRS = . doc $(MAKE_SUBDIRS) libs utils texk
DIST_SUBDIRS = auxdir/auxsub doc $(CONF_SUBDIRS) libs utils texk
recurse_this = 
recurse_top = 
cf_silent = $(cf_silent_@AM_V@)
cf_silent_ = $(cf_silent_@AM_DEFAULT_V@)
cf_silent_0 = --silent
cf_silent_1 = 
CONFIG_AUX = $(recurse_top)subsubdir-conf.cmd
# Run texlinks here since the binaries won't be there
# at install-data, and fmtutil.cnf won't be there at install-exec,
# and there is no install-hook or install-local.
texlinks_dir = texk/texlive/tl_support

# should be harmless to run it, but just in case:
build_info_target = buildinfo
@cross_FALSE@check_target = check

# Allow for skipping make check if needed.
@cross_TRUE@check_target = skip
all: all-recursive

.SUFFIXES:
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
	esac;
$(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

distdir-am: $(DISTFILES)
	$(am__remove_distdir)
	$(AM_V_at)$(MKDIR_P) "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-hook
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)
dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-zstd: distdir
	tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	*.tar.zst*) \
	  zstd -dc $(distdir).tar.zst | $(am__untar) ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am:

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:

.MAKE: $(am__recursive_targets) install-am install-exec-am \
	install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
	am--refresh check check-am clean clean-cscope clean-generic \
	clean-libtool cscope cscopelist-am ctags ctags-am dist \
	dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
	distclean-generic distclean-libtool distclean-tags \
	distcleancheck distdir distuninstallcheck dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-exec-hook install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags tags-am uninstall uninstall-am

.PRECIOUS: Makefile

dist-hook:
	cd "$(distdir)" && rm -rf $(NEVER_DIST)

all-local: recurse

.PHONY: recurse
recurse: $(CONFIG_AUX)
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	list='$(CONF_SUBDIRS)'; for one_dir in $$list; do \
	  if test ! -f $$one_dir/Makefile; then \
	    test -d $$one_dir || $(MKDIR_P) $$one_dir; \
	    cmd=`cat $(CONFIG_AUX) | sed "s,auxdir/auxsub,$(recurse_this)$$one_dir,g"`; \
	    case " $(MAKE_SUBDIRS) " in \
	      *" $$one_dir "*) skip=;; \
	      *) skip=' --disable-build';; \
	    esac; \
	    (cd $$one_dir && echo "=== configuring in $$one_dir (`pwd`)" && \
	      if $(AM_V_P); then echo "make: running $(SHELL) $$cmd$$skip"; fi && \
	      CONFIG_SHELL=$(SHELL) && export CONFIG_SHELL && \
	      eval $(SHELL) $$cmd$$skip $(cf_silent) || \
	        { echo "=== configuring in $$one_dir failed"; exit 1; }) && \
	    if test "x$$skip" = x; then \
	      echo "Making all in $$one_dir" && \
	      (cd $$one_dir && $(MAKE) $(AM_MAKEFLAGS) all); \
	    fi || eval $$failcom; \
	  fi; \
	done; test -z "$$fail"

$(CONFIG_AUX):
	@echo "configure in $(recurse_top)auxdir/auxsub failed to create the file $@"
	exit 1

# (end of recurse.am)

# This (world) is the default target for the ./Build script in TeX Live.
.PHONY: world
world: all
# Serialize 'make all' and 'make install-strip'.
	@echo "top-level make $@: running install-strip..."
	$(MAKE) $(AM_MAKEFLAGS) install-strip
#
# Just in case it's not a full checkout.
	if test -d "$(texlinks_dir)"; then \
	  echo "top-level make $@: making run-texlinks in $(texlinks_dir) ..."; \
	  cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks; \
	else :; fi
#
	@echo "top-level make $@: running $(check_target)..."
	$(MAKE) $(AM_MAKEFLAGS) $(check_target)
#
	@echo "top-level make $@ done."

# create file buildinfo.log in working directory, to record relevant
# information about the build environment.
buildinfo:
	-env MAKE="$(MAKE)" LDFLAGS="$(LDFLAGS)" \
	    CC="$(CC)" CFLAGS="$(CFLAGS)" \
	    CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" \
	    OBJCXX="$(OBJCXX)" OBJCXXFLAGS="$(OBJCXXFLAGS)" \
	$(srcdir)/doc/buildinfo.sh >buildinfo.log

# run buildinfo first.
all-recursive: buildinfo

install-exec-hook:
	@echo "WARNING: make install does not result in a usable TeX!"
	@echo "  ! The binaries require the myriad support files."
	@echo "  ! See http://tug.org/texlive/distro.html"
	@echo "  ! and http://tug.org/texlive/build.html#deploy, for example."
skip:
.PHONY: skip

# Convenience targets to run texlinks and reautoconf.
.PHONY: texlinks
texlinks:
	cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks

# Special target to run TRIP and TRAP tests and create diffs.
.PHONY: triptrap
triptrap:
	cd texk && $(MAKE) $(AM_MAKEFLAGS) $@

# We aren't trying to keep make dist working. Sorry.
distdir:
	@echo "Sorry, we don't try to keep make dist working in TeX Live."
	@echo
	@echo "You can retrieve the development and/or released sources"
	@echo "  in various ways: https://tug.org/texlive/svn"
	@echo
	@echo "For info on how to integrate the built binaries into a runnable"
	@echo "  system, see: https://tug.org/texlive/build.html#deploy"
	@echo
	@echo "The result of make install is not usable by itself."
	@false

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%