From ea3699c08ce15cc51cb3fb3c02381b6acd11896b Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Mon, 2 Apr 2012 23:56:18 +0000 Subject: fixltxhyph (2apr12) git-svn-id: svn://tug.org/texlive/trunk@25832 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/latex/fixltxhyph/README | 16 +- .../texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf | Bin 409928 -> 396755 bytes .../source/latex/fixltxhyph/fixltxhyph.dtx | 211 +++++++++++---------- .../texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty | 32 ++-- 4 files changed, 141 insertions(+), 118 deletions(-) (limited to 'Master/texmf-dist') diff --git a/Master/texmf-dist/doc/latex/fixltxhyph/README b/Master/texmf-dist/doc/latex/fixltxhyph/README index 2eed05d224c..c2cedbc9eeb 100644 --- a/Master/texmf-dist/doc/latex/fixltxhyph/README +++ b/Master/texmf-dist/doc/latex/fixltxhyph/README @@ -1,11 +1,11 @@ -FixLtxHyph v.0.3 +FixLtxHyph v.0. FixLtxHyph.sty is a small extension that allows to "correct' a small glitch in hyphenating "words" that are partially emphasized. This happens very frequently in languages such as Catalan, French, Italian, -Romansh, and other where articles and articulated preposition undergo vocalic -elision before a word that starts wit a vowel: example "della eleganza" +Romansh, Friulan, and other where articles and articulated preposition undergo vocalic +elision before a word that starts with a vowel: example "della eleganza" becomes "dell'eleganza" after vocalic elision. Now if "eleganza" is emphasized as in "dell'\emph{eleganza}" the literal string that TeX sees as a word includes the apostrophe, and this is fine @@ -15,15 +15,15 @@ whole string, while it has no problems when hyphenating the same word without emphasis: "del-l'e-le-gan-za". This small package works fine with both pdfLaTeX and XeLaTeX; it has been -tested with the four languages listed above; at the moment of writing -Romansh is not among the languages that are being dealt with by pdfLaTeX -and XeLaTeX, but soon hopefully it will. +tested with the five languages listed above; at the moment of writing +Romansh and Friulan are not among the languages that are being dealt with by pdfLaTeX +and XeLaTeX, but soon hopefully they will. The single FixLtxHyph.dtx file is auto extracting; if you process it with -pdfLaTeX you get both the documentation file in PDF format and the sty file. +pdfLaTeX you get both the documentation file in PDF format and the .sty file. After extraction move the files, as usual, in the three homonymous folders -latex/fixltxhtph/ rooted in source/, doc/ and tex/ respectively. +latex/fixltxhtph/ rooted in source/, doc/, and tex/ respectively. Claudio Beccari 2012 Author maintained diff --git a/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf b/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf index 75ee6c79b92..737d0604e39 100644 Binary files a/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf and b/Master/texmf-dist/doc/latex/fixltxhyph/fixltxhyph.pdf differ diff --git a/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx b/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx index 902826a9604..ab888913a03 100644 --- a/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx +++ b/Master/texmf-dist/source/latex/fixltxhyph/fixltxhyph.dtx @@ -7,7 +7,7 @@ \preamble ______________________________________________________ The FiXLtxHyph package - Copyright (C) 2011 Claudio Beccari + Copyright (C) 2011-2012 Claudio Beccari All rights reserved License information appended @@ -15,7 +15,7 @@ \endpreamble \postamble -Copyright 20112012 Claudio Beccari +Copyright 2011-2012 Claudio Beccari Distributable under the LaTeX Project Public License, version 1.3c or higher (your choice). The latest version of @@ -28,7 +28,7 @@ the derived file fixltxhyph.sty, and the English documentation fixltxhyph.pdf. -By running pdflatex on fixltxhyph.dtx the user gets the sty file, +By running pdflatex on fixltxhyph.dtx the user gets the .sty file, and the English documentation file in pdf format. \endpostamble @@ -46,7 +46,7 @@ and the English documentation file in pdf format. % \iffalse %<*driver> \documentclass{ltxdoc} -\ProvidesFile{fixltxhyph.dtx}[2012/02/17 v.0.3 Documented TeX file for +\ProvidesFile{fixltxhyph.dtx}[2012/04/02 v.0.4 Documented TeX file for the FixLtxHyph package] \GetFileInfo{fixltxhyph.dtx} \usepackage[latin1]{inputenc} @@ -56,7 +56,7 @@ the FixLtxHyph package] \usepackage{multicol} \title{\centering The FixLtxHyph package\protect\\ A small fix in order to hyphenate emphasized words after a vocalic elision\protect\\ -in Catalan, French, Italian and Romansh} +in Catalan, French, Italian, Romansh, and Friulan} \date{\fileversion\space\filedate} \author{Claudio Beccari} \usepackage{array} @@ -72,73 +72,61 @@ in Catalan, French, Italian and Romansh} \end{document} % % \fi -% \CheckSum{48} +% \CheckSum{84} % % \begin{abstract} % This file fixes a small feature of the hyphenation algorithm used by the \TeX\ system % typesetting engines that manifests itself only with those languages that use the % apostrophe for marking a vocalic elision. This small package was set up to fix this -% little undesirable feature in Italian, but it was extended to Catalan, French and the +% little undesirable feature in Italian, but it was extended to Catalan, French, the % future implementation of the fourth official Swiss language Rumantsch Grischun (Romansh -% in English). +% in English) and the future implementation of the Regional Language Friulan, spoken +% and written in North Eastern Italy. This fix operates correctly with both \prog{pdflatex} and \prog{xelatex}. % \end{abstract} % \section{What is the feature to be fixed} -% The four languages Catalan, French, Italian and Romansh use the apostrophe for marking -% the vocalic elision of the ending vowel at the end of prepositions, articles, articulated -% prepositions, definite adjectives, and other words playing similar rôles when they just -% precede nouns, adjectives, verbs, numerals, that start with a vowel. +% The five languages Catalan, French, Italian, Romansh, and Friulan use the apostrophe +% for marking the vocalic elision of the ending vowel at the end of prepositions, articles, +% articulated prepositions, definite adjectives, and other words playing similar rôles when +% they just precede nouns, adjectives, verbs, numerals, that start with a vowel. Probably +% there are other languages that use the apostrophe in a similar way. I can easily upgrade +% this small package if \LaTeX\ users of other languages let me know about such languages. % % This feature is common to most Romance languages (from West to East) from Catalan and % Valencian, to French, Langue d'oc, Occitan, Provençal, Vivaroalpin, Italian, Piedmontese, % Lombard, Romansh, Ladin, Friulian; up to now only Catalan, French and Italian are handled % by the \TeX\ system programs; at the same time most of these languages are minority ones % and are being protected by local legislation or are supported by specific cultural or -% linguistic institutions; only Romansh has got a national/federal legal status in -% Switzerland and is being used in legal and official documents in the Swiss Confederation, -% not only in its area of everyday use, the Kanton Graubunden or Canton Grigioni or -% Chantun Grischun (where seven Romansh varieties are being spoken, besides Swiss -% German, Italian, and other languages). +% linguistic institutions; Romansh has got a national/federal legal status in +% Switzerland and is being used in legal and official documents in the whole Swiss +% Confederation, not only in its area of everyday use, the Kanton Graubunden or Canton +% Grigioni or Chantun Grischun (where seven Romansh varieties are being spoken, besides +% Swiss German, Italian, and other languages). The Friulan language has an official +% regional status in the North-eastern Italian Region Friuli\,-Venezia Giulia. % % This spelling rule is very rigorous in French; I suppose it is also a rigorous rule in -% Catalan and Romansh, but I am not that familiar with these languages even if I can -% understand their written forms. In Italian it used to be a rigorous rule many years ago, -% but nowadays it is less frequently used when plurals are involved. -% Nevertheless apostrophes are practically the only para-alphabetic sign you see in an -% Italian text except for letters and punctuation marks. +% Catalan, Romansh, and Friulan but I am not that familiar with these languages even if I +% can understand their written forms. In Italian it used to be a rigorous rule many years +% ago, but nowadays it is less frequently used when plurals are involved. +% Nevertheless apostrophes are practically the only analphabetic sign you see in an +% Italian text except for letters and punctuation and quotation marks. % -% In order to hyphenate correctly these word combinations all four languages have to +% In order to hyphenate correctly these word combinations all five languages have to % declare the apostrophe, that has a category code of~12, as a glyph with non zero lower -% case code. In facts all four languages declare: +% case code. In facts all five languages declare: %\begin{verbatim} %\lccode`\'=`\' %\end{verbatim} % or something equivalent. With this little trick, the typesetting engine considers the % apostrophe as a valid word character and treats the whole string as a single word; the % patterns of these languages, of course, take into consideration also the apostrophe so -% that the resulting correct line break points are easily found\footnote{For typesetting -% Romansh and hyphenating it, initially I wrote myself a short language definition file, -% where, among other things, Romansh was considered as a dialect of Italian. In this way I did -% not need to build up the specific Romansh patterns; of course this was done only for thesting -% this small package. -% With my great surprise, my first feeling was that Italian patterns did a pretty -% good job (the common Latin ancestor helps a lot, of course); I spotted only very few final -% syllables without a vowel (which is wrong) and a couple of digraphs wrongly divided. After -% this ``successful'' start, I made up the Romansh hyphenation patters by just modifying the -% Italian ones in order to correct the few errors mentioned above; I checked my Romansh -% patterns aginst the hyphenation rules described in the \emph{Grammatica per l'instrucziun -% dal rumantsch grischun} published by the Department of romance languages and literature -% of the Friburg University, Switzerland. The patterns I produced work pretty well, but they -% are not built up for etimological hyphenation, therefore some prefixex or compound words -% might be divided without respecting the compound word barrier. At the date of writing these -% notes, the Romansh patterns and the language description file have been -% uploaded to the polyglossia and babel teams, but they are not yet available for the -% general user.}: +% that the resulting correct line breaks are easily found: %\begin{center} %\begin{tabular}{l>{\ttfamily}ll} %Catalan & d'aquesta & d'a-ques-ta \\ -%French & l'électricité & l'élec-tri-ci-té \\ +%French & l'électricité & l'élec-tri-ci-té \\ %Italian & dell'eleganza & del-l'e-le-gan-za \\ -%Romansh & l'identitad & l'i-den-ti-tad +%Romansh & l'identitad & l'i-den-ti-tad \\ +%Friulan & l'arbul & l'ar-bul %\end{tabular} %\end{center} % @@ -149,12 +137,13 @@ in Catalan, French, Italian and Romansh} %Catalan & d'\string\emph\{aquesta\} & d'\emph{aquesta} \\ %French & l'\string\emph\{électricité\} & l'\emph{électricité} \\ %Italian & dell'\string\emph\{eleganza\} & dell'\emph{eleganza} \\ -%Romansh & l'\string\emph\{identitad\} & l'\emph{identitad} +%Romansh & l'\string\emph\{identitad\} & l'\emph{identitad} \\ +%Friulan & l'\string\emph\{arbul\} & l'\emph{arbul} %\end{tabular} %\end{center} % % This behavior is easily explained, so that it is not to be considered a bug, but a -% feature; a feature that is annoying only when using the above four named languages. +% feature; a feature that is annoying only when using the above five named languages. % The point is that all \TeX\ system typesetting engines consider a word to be that % character string starting after a character invalid in a word and finishing with the % first token invalid in a word. Notice that when the hyphenating algorithm comes to work @@ -170,29 +159,31 @@ in Catalan, French, Italian and Romansh} % of type (1); (3) an implicit kern. \dots\ Notice that all these letters are % in font~$f$.'' % -% This was a specific programming choice decided by Donald Knuth together with Frank Liang, -% his PhD student who developed the hyphenation algorithm implemented in the typesetting -% engines of the \TeX\ system\footnote{I have been told that Lua\TeX\ is developing -% a different algorithm that eliminates this feature.}. -% As all such decisions, it is a compromise between accuracy and speed. And remember that at -% the beginning \prog{tex} the program was used essentially with English, a language that -% does not use accented letters and uses elision in a much different way as the one we are -% speaking here. The problem did non exist and, I suppose, it will never exist in English. +% This was a specific programming choice decided by Donald~E.\ Knuth together with Frank +% Liang, his PhD student who developed the hyphenation algorithm implemented in the +% typesetting engines of the \TeX\ system\footnote{I have been told that Lua\TeX\ is +% developing a different algorithm that eliminates this feature.}. +% As all such decisions, it is a compromise between accuracy and speed. And remember that +% at the beginning \prog{tex} the program was used essentially with English, a language +% that does not use accented letters and uses elision in a much different way as the one we +% are speaking here. The problem did non exist and, I suppose, it will never exist in +% English. % % \section{The solutions} % As a compromise I decided to solve the problem in an automatic way only when the second % part of the ``word'' to be hyphenated is emphasized. I suppose it is the most frequent -% situation, although no one can avoid thinking to other situations; for example; the +% situation, although no one can avoid thinking to other situations; for example: the % second part of such ``word'' after the apostrophe is bolded, is colored, is written -% in another font selected on purpose or is in another alphabet, it is in italics, with -% no choice on the inclination; in such cases the solution is manual and remains manual, -% because there are too many possibilities and it is cumbersome to deal with all of them. +% in another font selected on purpose or is in another alphabet, is in italics (with +% no automatic inclination switching); in such cases the solution is manual and remains +% manual, because there are too many possibilities and it is cumbersome to deal with all +% of them. % % But manual or automatic, how should we proceed? Simply we must convince that the % starting letter must not be the start of the part preceding the apostrophe, but what % follows it. -% This is simple: it suffices to put after the apostrophe a unbreakable, zero width glob of -% glue; \TeX\ starts looking for a potential starting letter after the glue. +% This is simple: it suffices to put after the apostrophe an unbreakable, zero width glob +% of glue; \TeX\ starts looking for a potential starting letter after the glue. % Therefore the manual solution consists in defining a short macro such as the following % one: %\begin{verbatim} @@ -204,29 +195,29 @@ in Catalan, French, Italian and Romansh} %\begin{verbatim} %... d'\hz\textbf{aquesta} ... %\end{verbatim} -% The |\hz|, whose name reminds the sentence ``Horizontal skip of an unbreakable Zero width +% The |\hz|, whose name reminds the phrase ``Horizontal skip of an unbreakable Zero width % glob of glue'', finishes the preceding word and sets the grounds for starting the search % of a new starting letter of another word; it will be found after the font selections code % introduced in the horizontal list by the selected font identification. % % The automatic solution, on the opposite, implies a small but substantial modification of % the |\emph| command. In facts the text command uses the text declaration |\em|; on turn -% |\em| is a robusta commanda, that is it is defined as \verb*|\protext\em |: it would be -% very unwise to modify a protected command, so it is necessary to modifiy the ``protected'' -% one, and this operation is not trivial because of the space in the name of this macro. -% In any case if we find out how, we must add |\hz| to the definition of \verb*|\em | before -% its argument, the real text to emphasize, is processed. +% |\em| is a robust command, that is it is defined as \verb*|\protect\em |: it would be +% very unwise to modify a protected command, so it is necessary to modify the +% \texttt{protect}ed one, and this operation is not trivial because of the space in this macro name. +% In any case if we find out how, we must add |\hz| to the definition of \verb*|\em | +% before its argument, the real text to emphasize, is processed. % -% This small package does exactly this, only for the four named languages, and only if +% This small package does exactly this, only for the five named languages, and only if % they are used, and only with the |\emph| command. The |\hz| command is available to the % user in a global way, so that when this package is loaded, the manual solution remains % valid for every language, although in very unlikely situations. % -% It has been tested with the four languages, and -% apparently it works as expected; it has been throughly tested in all situations with -% Italian; it should work properly also in French and in Romansh. The adopted solution -% does not fiddle with active characters and therefore it does not interfere with the -% internal workings and settings of Catalan and the other languages. +% It has been tested with the five languages with both \prog{pdflatex} and \prog{xelatex}, +% and apparently it works as expected; it has been throughly tested in all situations with +% Italian; it should work properly also in French, in Romansh, and in Friulan. The adopted +% solution does not fiddle with active characters and therefore it does not interfere with +% the internal workings and settings of Catalan and the other languages. % % \section{Installation} % With modern \TeX\ distributions these instructions are superfluous; should you need to @@ -252,7 +243,7 @@ in Catalan, French, Italian and Romansh} %\usepackage{fixltxhyph} %\end{verbatim} % -%\ section{Aknowledgements} +%\section{Aknowledgements} %I wish to thank Lorenzo Pantieri who tested the preliminary and the actual versions of % this package and directly or indirectly helped debugging the code, especially in the % preliminary version that used active characters and was particularly buggy. Another @@ -264,40 +255,45 @@ in Catalan, French, Italian and Romansh} % We start by identifying the package and the necessary format file: % \begin{macrocode} %<*style> -\ProvidesPackage{fixltxhyph}[2011/12/25 v.0.1 Small fix for hyphenating +\ProvidesPackage{fixltxhyph}[2011/04/02 v.0.4 Small fix for hyphenating emphasized words preceded by vocalic elision] \NeedsTeXFormat{LaTeX2e}[2011/06/27] % \end{macrocode} -% Then we make sure that the package \texttt{babel} has already been loaded; otherwise -% we warn the user and exit; no patches can be made to an unknown package. +% Then we make sure that the package \texttt{babel} or \texttt{polyglossia} has already +% been loaded; otherwise we warn the user and exit; no patches can be made to an unknown +% package. % \begin{macrocode} -\@ifpackageloaded{babel}{}{% -\PackageWarning{FixLtXHyph}{This package must be loaded after babel}% -\endinput} +\@ifpackageloaded{babel}{}{\@ifpackageloaded{polyglossia}{}{% +\PackageWarning{FixLtXHyph}{This package must be loaded after babel + or polyglossia}% +\endinput}} % \end{macrocode} % % We need the package |etoolbox| in order to perform any action on control sequences -% that contain spaces in their names. +% that contain spaces in their names; we do not need any means to test if we are working +% with \texttt{babel} or with \texttt{polyglossia} because, thanks to the previous +% tests, one of the two packages has certainly been loaded. % \begin{macrocode} -\RequirePackage{etoolbox} +\@ifpackageloaded{etoolbox}{}{\RequirePackage{etoolbox}} % \end{macrocode} % We define a very short command |\hz| in order to have available a handy command -% for inserting an unbreakable zero width glob of glue in case we needed to do some +% for inserting an unbreakable zero-width glob of glue in case we needed to do some % sort of patching by hand. % \begin{macrocode} \newcommand\hz{\nobreak\hskip\z@skip} % \end{macrocode} -% We make patches only if one or more of the four languages Catalan, French, Italian, or -% Romansh has been invoked as an option to \texttt{babel}; if none of these options had -% been selected, evidently the user had his/her thoughts focused on other details, so -% that s/he missed the point that this patch is necessary only for the above mentioned -% four languages. In any case no harm should happen if from now on nothing gets done, -% except for the definition of |hz| that remains available to the user. +% We make patches only if one or more of the five languages Catalan, French, Italian, +% Romansh, or Friulan (or its alias Furlan) has been invoked as an option to \texttt{babel} +% or specified to \texttt{polyglossia}; if none of these options had been selected, +% evidently the user was thinking to other details and missed the point that this patch is +% necessary only for the above mentioned five languages. In any case no harm takes place +% if from now on nothing else gets done, except for the definition of |hz| that remains +% available to the user. % % The next bit of code defines some aliases in order to keep the original meaning of the % declaration |\em|; in order to patch an alias, so as to be able to set the proper -% definitions only for the named four languages and to rest the original situation when a -% change of language takes place. +% definitions only for the named five languages and to restore the original situation when +% a change of language takes place. % \begin{macrocode} \letcs{\FLH@originalem}{em } \let\FLH@newem\FLH@originalem @@ -306,18 +302,35 @@ emphasized words preceded by vocalic elision] % % We then use a repetition cycle based on a list of language names; if the % language with one of the listed names has been invoked as an option to \texttt{babel}, -% then the patched \verb*|\em | definition is made the default, while when changing -% language the original definition is restored: +% or specified to \texttt{polyglossia} then the patched \verb*|\em | definition is made +% the default, while when changing language the original definition is restored; we define a macro that contains the language names: % \begin{macrocode} -\def\@tempB{catalan,french,italian,romansh} -\@for\@tempA:=\@tempB\do{% -\expandafter\ifx\csname captions\@tempA\endcsname\relax\else -\expandafter\addto\csname extras\@tempA\endcsname{\cslet{em }{\FLH@newem}}% -\expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}\fi} +\def\@tempB{catalan,french,italian,romansh,friulan,furlan} +% \end{macrocode} +% then we perform the above mentioned cycles; we have to distinguish if we are using +% \texttt{polyglossia} or \texttt{babel} because the internal setting and resetting macros +% of these two packages have different names; they are all made up by the agglutination of +% a prefixx to the language name, so we have to build the macro names to patch with the +% usual deferred name contraction by means of |\expandafter| and |\csname| with its +% companion |\endcsname|. +% \begin{macrocode} +\@ifpackageloaded{polyglossia}% +{\@for\@tempA:=\@tempB\do{% + \expandafter\ifx\csname captions\@tempA\endcsname\relax\else + \expandafter\addto\csname noextras@\@tempA\endcsname{\cslet{em }{\FLH@originalem}}% + \expandafter\addto\csname blockextras@\@tempA\endcsname{\cslet{em }{\FLH@newem}}% + \expandafter\addto\csname inlineextras@\@tempA\endcsname{\cslet{em }{\FLH@newem}}% + \fi}% +}{\@for\@tempA:=\@tempB\do{% + \expandafter\ifx\csname captions\@tempA\endcsname\relax\else + \expandafter\addto\csname extras\@tempA\endcsname{\cslet{em }{\FLH@newem}}% + \expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}% + \fi}% +} % \end{macrocode} % -% Eventually the documented file is terminated and its final commands are issued. -%\begin{macrocode} +% This documented file is now terminated and its final commands are issued. +% \begin{macrocode} \endinput % % \end{macrocode} diff --git a/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty b/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty index 2061d4af150..1a422ed757a 100644 --- a/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty +++ b/Master/texmf-dist/tex/latex/fixltxhyph/fixltxhyph.sty @@ -7,29 +7,39 @@ %% fixltxhyph.dtx (with options: `style') %% ______________________________________________________ %% The FiXLtxHyph package -%% Copyright (C) 2011 Claudio Beccari +%% Copyright (C) 2011-2012 Claudio Beccari %% All rights reserved %% %% License information appended %% -\ProvidesPackage{fixltxhyph}[2011/12/25 v.0.1 Small fix for hyphenating +\ProvidesPackage{fixltxhyph}[2011/04/02 v.0.4 Small fix for hyphenating emphasized words preceded by vocalic elision] \NeedsTeXFormat{LaTeX2e}[2011/06/27] -\@ifpackageloaded{babel}{}{% -\PackageWarning{FixLtXHyph}{This package must be loaded after babel}% -\endinput} -\RequirePackage{etoolbox} +\@ifpackageloaded{babel}{}{\@ifpackageloaded{polyglossia}{}{% +\PackageWarning{FixLtXHyph}{This package must be loaded after babel + or polyglossia}% +\endinput}} +\@ifpackageloaded{etoolbox}{}{\RequirePackage{etoolbox}} \newcommand\hz{\nobreak\hskip\z@skip} \letcs{\FLH@originalem}{em } \let\FLH@newem\FLH@originalem \preto\FLH@newem{\hz} -\def\@tempB{catalan,french,italian,romansh} -\@for\@tempA:=\@tempB\do{% +\def\@tempB{catalan,french,italian,romansh,friulan,furlan} +\@ifpackageloaded{polyglossia}% +{\@for\@tempA:=\@tempB\do{% +\expandafter\ifx\csname captions\@tempA\endcsname\relax\else +\expandafter\addto\csname noextras@\@tempA\endcsname{\cslet{em }{\FLH@originalem}}% +\expandafter\addto\csname blockextras@\@tempA\endcsname{\cslet{em }{\FLH@newem}}% +\expandafter\addto\csname inlineextras@\@tempA\endcsname{\cslet{em }{\FLH@newem}}% +\fi}% +}{\@for\@tempA:=\@tempB\do{% \expandafter\ifx\csname captions\@tempA\endcsname\relax\else \expandafter\addto\csname extras\@tempA\endcsname{\cslet{em }{\FLH@newem}}% -\expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}\fi} +\expandafter\addto\csname noextras\@tempA\endcsname{\cslet{em }{\FLH@originalem}}% +\fi}% +} %% -%% Copyright 20112012 Claudio Beccari +%% Copyright 2011-2012 Claudio Beccari %% %% Distributable under the LaTeX Project Public License, %% version 1.3c or higher (your choice). The latest version of @@ -42,7 +52,7 @@ emphasized words preceded by vocalic elision] %% documentation fixltxhyph.pdf. %% %% -%% By running pdflatex on fixltxhyph.dtx the user gets the sty file, +%% By running pdflatex on fixltxhyph.dtx the user gets the .sty file, %% and the English documentation file in pdf format. %% %% -- cgit v1.2.3