From 908355bfd70069fa5c62ccdaaac6d39e5da341ff Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Wed, 7 Oct 2015 22:32:58 +0000 Subject: sync git-svn-id: svn://tug.org/texlive/trunk@38582 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/bibtex/bib/beebe/texbook3.bib | 4 +- Master/texmf-dist/scripts/texlive/fmtutil.pl | 17 +- Master/texmf-dist/tex/texinfo/texinfo.tex | 1207 +++++++++++++++-------- 3 files changed, 809 insertions(+), 419 deletions(-) (limited to 'Master/texmf-dist') diff --git a/Master/texmf-dist/bibtex/bib/beebe/texbook3.bib b/Master/texmf-dist/bibtex/bib/beebe/texbook3.bib index c78bee0483a..afbc9ffa5b8 100644 --- a/Master/texmf-dist/bibtex/bib/beebe/texbook3.bib +++ b/Master/texmf-dist/bibtex/bib/beebe/texbook3.bib @@ -17,7 +17,7 @@ %%% telephone = "+1 801 581 5254", %%% FAX = "+1 801 581 4148", %%% URL = "http://www.math.utah.edu/~beebe", -%%% checksum = "12062 16910 69189 679181", +%%% checksum = "10338 16912 69193 679299", %%% email = "beebe at math.utah.edu, beebe at acm.org, %%% beebe at computer.org (Internet)", %%% codetable = "ISO/ASCII", @@ -4902,6 +4902,7 @@ LCCN = "Z253.4.T47 E38 1992", bibdate = "Tue Dec 14 22:47:52 1993", bibsource = "http://www.math.utah.edu/pub/tex/bib/texbook3.bib", + URL = "http://eijkhout.net/texbytopic/", } @Book{Emerson:1987:TTU, @@ -14947,6 +14948,7 @@ LCCN = "????", bibdate = "Tue May 14 11:52:57 MDT 2013", bibsource = "fsz3950.oclc.org:210/WorldCat; + http://www.math.utah.edu/pub/tex/bib/master.bib; http://www.math.utah.edu/pub/tex/bib/texbook3.bib", series = "Dante", acknowledgement = ack-nhfb, diff --git a/Master/texmf-dist/scripts/texlive/fmtutil.pl b/Master/texmf-dist/scripts/texlive/fmtutil.pl index 35ed5b710b4..d01ad7cef1f 100755 --- a/Master/texmf-dist/scripts/texlive/fmtutil.pl +++ b/Master/texmf-dist/scripts/texlive/fmtutil.pl @@ -716,10 +716,11 @@ sub callback_enable_disable_format { if ($alldata->{'merged'}{$fmt}) { my @engs = keys %{$alldata->{'merged'}{$fmt}}; if (($#engs > 0) || ($#engs == -1)) { - print_warning("Selected format $fmt not uniquely defined,\n"); - print_warning("possible format/engines combinations:\n"); + print_warning("Selected format $fmt not uniquely defined;\n"); + print_warning("possible format/engine combinations:\n"); for my $e (@engs) { - print_warning(" $fmt/$e (currently " . $alldata->{'merged'}{$fmt}{$e}{'status'} . ")\n"); + print_warning(" $fmt/$e (currently " + . $alldata->{'merged'}{$fmt}{$e}{'status'} . ")\n"); } print_warning("Please select one by fully specifying $fmt/ENGINE\n"); print_warning("No changes done.\n"); @@ -729,8 +730,8 @@ sub callback_enable_disable_format { return enable_disable_format_engine($tc, $fmt, $engs[0], $mode); } } else { - print_warning("Format $fmt is not defined.\n"); - print_warning("Cannot (de)activate it.\n"); + print_warning("Format $fmt is not defined;\n"); + print_warning("cannot (de)activate it.\n"); return -1; } } @@ -1175,9 +1176,9 @@ Commands: --byhyphen HYPHENFILE (re)create formats that depend on HYPHENFILE --enablefmt FORMATNAME[/ENGINE] enable formatname in config file --disablefmt FORMATNAME[/ENGINE] disable formatname in config file - If more formats share the same name but have - different engines, the ENGINE parameter is - obligatory. + If multiple formats have the same name but + different engines, the /ENGINE specifier is + required. --listcfg list (enabled and disabled) configurations, filtered to available formats --catcfg output the content of the config file diff --git a/Master/texmf-dist/tex/texinfo/texinfo.tex b/Master/texmf-dist/tex/texinfo/texinfo.tex index f773c90b8d5..6a81594bd97 100644 --- a/Master/texmf-dist/tex/texinfo/texinfo.tex +++ b/Master/texmf-dist/tex/texinfo/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2015-07-01.07} +\def\texinfoversion{2015-10-06.21} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, @@ -196,17 +196,6 @@ wide-spread wrap-around } -% Margin to add to right of even pages, to left of odd pages. -\newdimen\bindingoffset -\newdimen\normaloffset -\newdimen\pagewidth \newdimen\pageheight - -% For a final copy, take out the rectangles -% that mark overfull boxes (in case you have decided -% that the text looks ok even though it passes the margin). -% -\def\finalout{\overfullrule=0pt } - % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, % since that produces some useless output on the terminal. We also make @@ -251,6 +240,15 @@ \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount \removelastskip\penalty-200\bigskip\fi\fi} +% Output routine +% + +% For a final copy, take out the rectangles +% that mark overfull boxes (in case you have decided +% that the text looks ok even though it passes the margin). +% +\def\finalout{\overfullrule=0pt } + % Do @cropmarks to get crop marks. % \newif\ifcropmarks @@ -290,6 +288,9 @@ \noexpand\else \the\toks8 % 2: color marks }% } + +% \gettopheadingmarks, \getbottomheadingmarks - extract needed part of mark. +% % \topmark doesn't work for the very first chapter (after the title % page or the contents), so we use \firstmark there -- this gets us % the mark with the chapter defs, unless the user sneaks in, e.g., @@ -310,32 +311,69 @@ \def\prevsectiondefs{} \def\lastcolordefs{} +% Margin to add to right of even pages, to left of odd pages. +\newdimen\bindingoffset +\newdimen\normaloffset +\newdimen\pagewidth \newdimen\pageheight + % Main output routine. +% \chardef\PAGE = 255 \output = {\onepageout{\pagecontents\PAGE}} \newbox\headlinebox \newbox\footlinebox -% \onepageout takes a vbox as an argument. Note that \pagecontents -% does insertions, but you have to call it yourself. +% \onepageout takes a vbox as an argument. +% \shipout a vbox for a single page, adding an optional header, footer, +% cropmarks, and footnote. This also causes index entries for this page +% to be written to the auxiliary files. +% \def\onepageout#1{% \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi % \ifodd\pageno \advance\hoffset by \bindingoffset \else \advance\hoffset by -\bindingoffset\fi % + % Common context changes for both heading and footing. % Do this outside of the \shipout so @code etc. will be expanded in % the headline as they should be, not taken literally (outputting ''code). \def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars} % - \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi - \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% + % Retrieve the information for the headings from the marks in the page, + % and call Plain TeX's \makeheadline and \makefootline, which use the + % values in \headline and \footline. % + % This is used to check if we are on the first page of a chapter. + \ifcase0\topmark\fi + \ifx\thischapter\empty + % See comment for \gettopheadingmarks + \ifcase0\firstmark\fi + \let\curchaptername\thischaptername + \ifcase1\firstmark\fi + \let\prevchaptername\thischaptername + \else + \let\curchaptername\thischaptername + \ifcase1\topmark\fi + \let\prevchaptername\thischaptername + \fi + % + \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi + % + \ifx\curchaptername\prevchaptername + \else + % If on the first page of a chapter, clear @thischapter so it + % doesn't appear in the headline, because the chapter is already + % shown in the chapter heading. + \def\thischapter{}% + \fi + % + \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}% \global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}% % {% + % Set context for writing to auxiliary files like index files. % Have to do this stuff outside the \shipout because we want it to % take effect in \write's, yet the group defined by the \vbox ends % before the \shipout runs. @@ -344,10 +382,10 @@ \normalturnoffactive % \ in index entries must not stay \, e.g., if % the page break happens to be in the middle of an example. % We don't want .vr (or whatever) entries like this: - % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} + % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}} % "\acronym" won't work when it's read back in; % it needs to be - % {\code {{\tt \backslashcurfont }acronym} + % {\code {{\backslashcurfont }acronym} \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi @@ -405,6 +443,7 @@ \newinsert\margin \dimen\margin=\maxdimen +% Main part of page, including any footnotes \def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} {\catcode`\@ =11 \gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi @@ -427,9 +466,13 @@ \def\nsbot{\vbox {\hrule height\cornerlong depth\cornerthick width\cornerthick}} + +% Argument parsing + % Parse an argument, then pass it to #1. The argument is the rest of % the input line (except we remove a trailing comment). #1 should be a % macro which expects an ordinary undelimited TeX argument. +% For example, \def\foo{\parsearg\fooxxx}. % \def\parsearg{\parseargusing{}} \def\parseargusing#1#2{% @@ -448,9 +491,11 @@ }% } -% First remove any @comment, then any @c comment. +% First remove any @comment, then any @c comment. Also remove a @texinfoc +% comment (see \scanmacro for details). Pass the result on to \argcheckspaces. \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} -\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} +\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm} +\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} % Each occurrence of `\^^M' or `\^^M' is replaced by a single space. % @@ -682,6 +727,12 @@ \endgraf % Not \par, as it may have been set to \lisppar. \global\dimen1 = \prevdepth \egroup % End the \vtop. + \addgroupbox + \prevdepth = \dimen1 + \checkinserts +} + +\def\addgroupbox{ % \dimen0 is the vertical size of the group's box. \dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox % \dimen2 is how much space is left on the page (more or less). @@ -694,9 +745,8 @@ \fi \fi \box\groupbox - \prevdepth = \dimen1 - \checkinserts } + % % TeX puts in an \escapechar (i.e., `@') at the beginning of the help % message, so this ends up printing `@group can only ...'. @@ -939,12 +989,20 @@ where each line of input produces a line of output.} % @c is the same as @comment % @ignore ... @end ignore is another way to write a comment % -\def\comment{\begingroup \catcode`\^^M=\other% +\def\comment{\begingroup \catcode`\^^M=\active% +\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}% + +{\catcode`\^^M=\active% +\gdef\commentxxx#1^^M{\endgroup% +\futurelet\nexttoken\commentxxxx}% +\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}% +} + +\def\c{\begingroup \catcode`\^^M=\active% \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other% -\commentxxx} -{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}} -% -\let\c=\comment +\cxxx} +{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}} +% See comment in \scanmacro about why the definitions of @c and @comment differ % @paragraphindent NCHARS % We'll use ems for NCHARS, close enough. @@ -1030,45 +1088,8 @@ where each line of input produces a line of output.} % @refill is a no-op. \let\refill=\relax -% If working on a large document in chapters, it is convenient to -% be able to disable indexing, cross-referencing, and contents, for test runs. -% This is done with @novalidate (before @setfilename). -% -\newif\iflinks \linkstrue % by default we want the aux files. -\let\novalidate = \linksfalse - -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \iflinks - \tryauxfile - % Open the new aux file. TeX will close it automatically at exit. - \immediate\openout\auxfile=\jobname.aux - \fi % \openindices needs to do some work in any case. - \openindices - \let\setfilename=\comment % Ignore extra @setfilename cmds. - % - % If texinfo.cnf is present on the system, read it. - % Useful for site-wide @afourpaper, etc. - \openin 1 texinfo.cnf - \ifeof 1 \else \input texinfo.cnf \fi - \closein 1 - % - \comment % Ignore the actual filename. -} - -% Called from \setfilename. -% -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% -} +% @setfilename INFO-FILENAME - ignored +\let\setfilename=\comment % @bye. \outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} @@ -1395,6 +1416,7 @@ output) for that.)} \normalturnoffactive \def\@{@}% \let\/=\empty + \let\xprocessmacroarg=\eatspaces % in case we are in a macro expansion \makevalueexpandable % do we want to go so far as to use \indexnofonts instead of just % special-casing \var here? @@ -1822,8 +1844,10 @@ end % A few fonts for @defun names and args. \setfont\defbf\bfshape{10}{\magstep1}{OT1} \setfont\deftt\ttshape{10}{\magstep1}{OT1TT} +\setfont\defsl\slshape{10}{\magstep1}{OT1TT} \setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf +\let\tenttsl=\defttsl \let\tensl=\defsl \bf} % Fonts for indices, footnotes, small examples (9pt). \def\smallnominalsize{9pt} @@ -1884,6 +1908,7 @@ end % Section fonts (14.4pt). \def\secnominalsize{14pt} \setfont\secrm\rmbshape{12}{\magstep1}{OT1} +\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1} \setfont\secit\itbshape{10}{\magstep2}{OT1IT} \setfont\secsl\slbshape{10}{\magstep2}{OT1} \setfont\sectt\ttbshape{12}{\magstep1}{OT1TT} @@ -1953,8 +1978,10 @@ end % A few fonts for @defun names and args. \setfont\defbf\bfshape{10}{\magstephalf}{OT1} \setfont\deftt\ttshape{10}{\magstephalf}{OT1TT} +\setfont\defsl\slshape{10}{\magstephalf}{OT1TT} \setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT} -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf} +\def\df{\let\tentt=\deftt \let\tenbf = \defbf +\let\tensl=\defsl \let\tenttsl=\defttsl \bf} % Fonts for indices, footnotes, small examples (9pt). \def\smallnominalsize{9pt} @@ -2773,11 +2800,6 @@ end % \def\dmn#1{\thinspace #1} -% @l was never documented to mean ``switch to the Lisp font'', -% and it is not used as such in any manual I can find. We need it for -% Polish suppressed-l. --karl, 22sep96. -%\def\l#1{{\li #1}\null} - % @acronym for "FBI", "NATO", and the like. % We print this one point size smaller, since it's intended for % all-uppercase. @@ -2881,9 +2903,6 @@ end \def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi} \def\finishsup#1{$\ptexsp{\hbox{\selectfonts\lllsize #1}}$}% -% ctrl is no longer a Texinfo command, but leave this definition for fun. -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - % @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. % Ignore unless FMTNAME == tex; then it is like @iftex and @tex, % except specified as a normal braced arg, so no newlines to worry about. @@ -3391,7 +3410,7 @@ end \newtoks\evenfootline % footline on even pages \newtoks\oddfootline % footline on odd pages -% Now make TeX use those variables +% Now make \makeheadline and \makefootline in Plain TeX use those variables \headline={{\textfonts\rm \ifodd\pageno \the\oddheadline \else \the\evenheadline \fi}} \footline={{\textfonts\rm \ifodd\pageno \the\oddfootline @@ -3447,6 +3466,10 @@ end % @everyheadingmarks % @everyfootingmarks +% These define \getoddheadingmarks, \getevenheadingmarks, +% \getoddfootingmarks, and \getevenfootingmarks, each to one of +% \gettopheadingmarks, \getbottomheadingmarks. +% \def\evenheadingmarks{\headingmarks{even}{heading}} \def\oddheadingmarks{\headingmarks{odd}{heading}} \def\evenfootingmarks{\headingmarks{even}{footing}} @@ -3736,7 +3759,12 @@ end \noindent \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% % - \vadjust{\penalty 1200}}% not good to break after first line of item. + \ifinner\else + \vadjust{\penalty 1200}% not good to break after first line of item. + \fi + % We can be in inner vertical mode in a footnote, although an + % @itemize looks awful there. + }% \flushcr } @@ -4358,19 +4386,16 @@ end % except not \outer, so it can be used within macros and \if's. \edef\newwrite{\makecsname{ptexnewwrite}} -% \newindex {foo} defines an index named foo. -% It automatically defines \fooindex such that -% \fooindex ...rest of line... puts an entry in the index foo. -% It also defines \fooindfile to be the number of the output channel for -% the file that accumulates this index. The file's extension is foo. +% \newindex {foo} defines an index named IX. +% It automatically defines \IXindex such that +% \IXindex ...rest of line... puts an entry in the index IX. +% It also defines \IXindfile to be the number of the output channel for +% the file that accumulates this index. The file's extension is IX. % The name of an index should be no more than 2 characters long % for the sake of vms. % \def\newindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 % Open the file - \fi + \expandafter\chardef\csname#1indfile\endcsname=0 \expandafter\xdef\csname#1index\endcsname{% % Define @#1index \noexpand\doindex{#1}} } @@ -4384,14 +4409,19 @@ end \def\defcodeindex{\parsearg\newcodeindex} % \def\newcodeindex#1{% - \iflinks - \expandafter\newwrite \csname#1indfile\endcsname - \openout \csname#1indfile\endcsname \jobname.#1 - \fi + \expandafter\chardef\csname#1indfile\endcsname=0 \expandafter\xdef\csname#1index\endcsname{% \noexpand\docodeindex{#1}}% } +% The default indices: +\newindex{cp}% concepts, +\newcodeindex{fn}% functions, +\newcodeindex{vr}% variables, +\newcodeindex{tp}% types, +\newcodeindex{ky}% keys +\newcodeindex{pg}% and programs. + % @synindex foo bar makes index foo feed into index bar. % Do this instead of @defindex foo if you don't want it as a separate index. @@ -4420,26 +4450,19 @@ end \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}% } -% Define \doindex, the driver for all \fooindex macros. +% Define \doindex, the driver for all index macros. % Argument #1 is generated by the calling \fooindex macro, -% and it is "foo", the name of the index. +% and it the two-letter name of the index. -% \doindex just uses \parsearg; it calls \doind for the actual work. -% This is because \doind is more useful to call from other macros. - -% There is also \dosubind {index}{topic}{subtopic} -% which makes an entry in a two-level index such as the operation index. - -\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} -\def\singleindexer #1{\doind{\indexname}{#1}} +\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx} +\def\doindexxxx #1{\doind{\indexname}{#1}} % like the previous two, but they put @code around the argument. -\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} -\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} +\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx} +\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}} -% Take care of Texinfo commands that can appear in an index entry. -% Since there are some commands we want to expand, and others we don't, -% we have to laboriously prevent expansion for those that we don't. +% Used when writing an index entry out to an index file, to prevent +% expansion of Texinfo commands that can appear in an index entry. % \def\indexdummies{% \escapechar = `\\ % use backslash in output files. @@ -4455,31 +4478,6 @@ end \def\{{{\tt\char123}}% \def\}{{\tt\char125}}% % - % I don't entirely understand this, but when an index entry is - % generated from a macro call, the \endinput which \scanmacro inserts - % causes processing to be prematurely terminated. This is, - % apparently, because \indexsorttmp is fully expanded, and \endinput - % is an expandable command. The redefinition below makes \endinput - % disappear altogether for that purpose -- although logging shows that - % processing continues to some further point. On the other hand, it - % seems \endinput does not hurt in the printed index arg, since that - % is still getting written without apparent harm. - % - % Sample source (mac-idx3.tex, reported by Graham Percival to - % help-texinfo, 22may06): - % @macro funindex {WORD} - % @findex xyz - % @end macro - % ... - % @funindex commtest - % This is not enough to reproduce the bug, but it gives the flavor. - % - % Sample whatsit resulting: - % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} - % - % So: - \let\endinput = \empty - % % Do the redefinitions. \commondummies } @@ -4686,11 +4684,39 @@ end % that we make for arg2 (see \parsemargdef ff.). We want all this to be % expanded for the sake of the index, so we end up just seeing "bar". \let\xeatspaces = \eatspaces + \let\xprocessmacroarg\eatspaces } % For testing: output @{ and @} in index sort strings as \{ and \}. \newif\ifusebracesinindexes +\let\indexlbrace\relax +\let\indexrbrace\relax + +{\catcode`\@=0 +\catcode`\\=13 + @gdef@backslashdisappear{@def\{}} +} + +{ +\catcode`\<=13 +\catcode`\-=13 + \gdef\indexnonalnumdisappear{% + \backslashdisappear + \def-{}% + \def<{}% + \def\@{}% + } + + \gdef\indexnonalnumreappear{% + \useindexbackslash + \let-\normaldash + \let<\normalless + \def\@{@}% + } +} + + % \indexnofonts is used when outputting the strings to sort the index % by, and when constructing control sequence names. It eliminates all % control sequences and just writes whatever the best ASCII sort string @@ -4716,16 +4742,10 @@ end \def\_{\normalunderscore}% \def\-{}% @- shouldn't affect sorting % - % Unfortunately, texindex is not prepared to handle braces in the - % content at all. So for index sorting, we map @{ and @} to strings - % starting with |, since that ASCII character is between ASCII { and }. - \ifusebracesinindexes - \def\lbracechar{\lbracecmd}% - \def\rbracechar{\rbracecmd}% - \else - \def\lbracechar{|a}% - \def\rbracechar{|b}% - \fi + % Unfortunately, texindex < 6.0 is not prepared to handle braces in the + % content at all, so these won't be sorted in ASCII order. + \def\lbracechar{{\indexlbrace}}% + \def\rbracechar{{\indexrbrace}}% \let\{=\lbracechar \let\}=\rbracechar % @@ -4737,7 +4757,7 @@ end \def\L{L}% \def\OE{OE}% \def\O{O}% - \def\TH{ZZZ}% + \def\TH{TH}% \def\aa{aa}% \def\ae{ae}% \def\dh{dzz}% @@ -4749,7 +4769,7 @@ end \def\o{o}% \def\questiondown{?}% \def\ss{ss}% - \def\th{zzz}% + \def\th{th}% % \def\LaTeX{LaTeX}% \def\TeX{TeX}% @@ -4807,14 +4827,17 @@ end {\catcode`\`=\active \gdef\indexlquoteignore{\let`=\empty}} -\let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? % Most index entries go through here, but \dosubind is the general case. % #1 is the index name, #2 is the entry text. \def\doind#1#2{\dosubind{#1}{#2}{}} -% Workhorse for all \fooindexes. +% There is also \dosubind {index}{topic}{subtopic} +% which makes an entry in a two-level index such as the operation index. +% TODO: Two-level index? Operation index? + +% Workhorse for all indexes. % #1 is name of index, #2 is stuff to put there, #3 is subentry -- % empty if called from \doind, as we usually are (the main exception % is with most defuns, which call us directly). @@ -4822,6 +4845,7 @@ end \def\dosubind#1#2#3{% \iflinks {% + \requireopenindexfile{#1}% % Store the main index entry text (including the third arg). \toks0 = {#2}% % If third arg is present, precede it with a space. @@ -4837,7 +4861,49 @@ end \fi } -% Write the entry in \toks0 to the index file: +% Check if an index file has been opened, and if not, open it. +\def\requireopenindexfile#1{% +\ifnum\csname #1indfile\endcsname=0 + \expandafter\newwrite \csname#1indfile\endcsname + \edef\suffix{#1}% + % A .fls suffix would conflict with the file extension for the output + % of -recorder, so use .f1s instead. + \ifx\suffix\indexisfl\def\suffix{f1}\fi + % Open the file + \immediate\openout\csname#1indfile\endcsname \jobname.\suffix + % Using \immediate here prevents an object entering into the current box, + % which could confound checks such as those in \safewhatsit for preceding + % skips. +\fi} +\def\indexisfl{fl} + +% Output \ as {\indexbackslash}, because \ is an escape character in +% the index files. +\let\indexbackslash=\relax +{\catcode`\@=0 \catcode`\\=\active + @gdef@useindexbackslash{@def\{{@indexbackslash}}} +} + +% Definition for writing index entry text. +\def\sortas#1{\ignorespaces}% + +% Definition for writing index entry sort key. Should occur at the at +% the beginning of the index entry, like +% @cindex @sortas{september} \september +% The \ignorespaces takes care of following space, but there's no way +% to remove space before it. +{ +\catcode`\-=13 +\gdef\indexwritesortas{% + \begingroup + \indexnonalnumreappear + \indexwritesortasxxx} +\gdef\indexwritesortasxxx#1{% + \xdef\indexsortkey{#1}\endgroup} +} + + +% Write the entry in \toks0 to the index file. % \def\dosubindwrite{% % Put the index entry in the margin if desired. @@ -4847,14 +4913,20 @@ end % % Remember, we are within a group. \indexdummies % Must do this here, since \bf, etc expand at this stage - \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now - % so it will be output as is; and it will print as backslash. - % - % Process the index entry with all font commands turned off, to - % get the string to sort by. + \useindexbackslash % \indexbackslash isn't defined now so it will be output + % as is; and it will print as backslash. + % Get the string to sort by, by processing the index entry with all + % font commands turned off. {\indexnofonts - \edef\temp{\the\toks0}% need full expansion - \xdef\indexsorttmp{\temp}% + \xdef\indexsortkey{}% + \let\sortas=\indexwritesortas + \indexnonalnumdisappear + \edef\temp{\the\toks0}% + \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas + \ifx\indexsortkey\empty + \xdef\indexsortkey{\temp}% + \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi + \fi }% % % Set up the complete index entry, with both the sort key and @@ -4864,10 +4936,11 @@ end % sorted result. \edef\temp{% \write\writeto{% - \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}% + \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}% }% \temp } +\newbox\dummybox % used above % Take care of unwanted page breaks/skips around a whatsit: % @@ -4993,7 +5066,9 @@ end % as its first line, TeX doesn't complain about mismatched braces % (because it thinks @} is a control sequence). \catcode`\@ = 11 - \openin 1 \jobname.#1s + % See comment in \requireopenindexfile. + \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi + \openin 1 \jobname.\indexname s \ifeof 1 % \enddoublecolumns gets confused if there is no text in the index, % and it loses the chapter title and the aux file entries for the @@ -5001,43 +5076,96 @@ end % there is some text. \putwordIndexNonexistent \else + \catcode`\\ = 0 + \escapechar = `\\ % % If the index file exists but is empty, then \openin leaves \ifeof % false. We have to make TeX try to read something from the file, so % it can discover if there is anything in it. - \read 1 to \temp + \read 1 to \thisline \ifeof 1 \putwordIndexIsEmpty \else % Index files are almost Texinfo source, but we use \ as the escape % character. It would be better to use @, but that's too big a change % to make right now. - \def\indexbackslash{\backslashcurfont}% - \catcode`\\ = 0 - \escapechar = `\\ + \def\indexbackslash{\ttbackslash}% + \let\indexlbrace\{ % Likewise, set these sequences for braces + \let\indexrbrace\} % used in the sort key. \begindoublecolumns - \input \jobname.#1s + \let\entryorphanpenalty=\indexorphanpenalty + % + % Read input from the index file line by line. + \loopdo + \ifeof1 + \let\firsttoken\relax + \else + \read 1 to \nextline + \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}% + \act + \fi + \thisline + % + \ifeof1\else + \let\thisline\nextline + \repeat + %% \enddoublecolumns \fi \fi \closein 1 \endgroup} +\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken} +\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1} + +\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx} +\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next} + % These macros are used by the sorted index file itself. % Change them to control the appearance of the index. -\def\initial#1{{% - % Some minor font changes for the special characters. - \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt - % +{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13 +\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13 +\catcode`\$=3 +\gdef\initialglyphs{% + % Some changes for non-alphabetic characters. Using the glyphs from the + % math fonts looks more consistent than the typewriter font used elsewhere + % for these characters. + \def\indexbackslash{\math{\backslash}}% + \let\\=\indexbackslash + % + % Can't get bold backslash so don't use bold forward slash + \catcode`\/=13 + \def/{{\secrmnotbold \normalslash}}% + \def-{{\normaldash\normaldash}}% en dash `--' + \def^{{\chapbf \normalcaret}}% + \def~{{\chapbf \normaltilde}}% + \def\_{% + \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }% + \def|{$\vert$}% + \def<{$\less$}% + \def>{$\gtr$}% + \def+{$\normalplus$}% +}} + +\def\initial{% + \bgroup + \initialglyphs + \initialx +} + +\def\initialx#1{% % Remove any glue we may have, we'll be inserting our own. \removelastskip % % We like breaks before the index initials, so insert a bonus. + % The glue before the bonus allows a little bit of space at the + % bottom of a column to reduce an increase in inter-line spacing. \nobreak - \vskip 0pt plus 3\baselineskip - \penalty 0 - \vskip 0pt plus -3\baselineskip + \vskip 0pt plus 5\baselineskip + \penalty -300 + \vskip 0pt plus -5\baselineskip % % Typeset the initial. Making this add up to a whole number of % baselineskips increases the chance of the dots lining up from column @@ -5045,24 +5173,24 @@ end % we need before each entry, but it's better. % % No shrink because it confuses \balancecolumns. - \vskip 1.67\baselineskip plus .5\baselineskip - \leftline{\secbf #1}% + \vskip 1.67\baselineskip plus 1\baselineskip + \leftline{\secfonts \kern-0.05em \secbf #1}% + % \secfonts is inside the argument of \leftline so that the change of + % \baselineskip will not affect any glue inserted before the vbox that + % \leftline creates. % Do our best not to break after the initial. \nobreak \vskip .33\baselineskip plus .1\baselineskip -}} + \egroup % \initialglyphs +} + +\newdimen\entryrightmargin +\entryrightmargin=0pt % \entry typesets a paragraph consisting of the text (#1), dot leaders, and % then page number (#2) flushed to the right margin. It is used for index % and table of contents entries. The paragraph is indented by \leftskip. % -% A straightforward implementation would start like this: -% \def\entry#1#2{... -% But this freezes the catcodes in the argument, and can cause problems to -% @code, which sets - active. This problem was fixed by a kludge--- -% ``-'' was active throughout whole index, but this isn't really right. -% The right solution is to prevent \entry from swallowing the whole text. -% --kasal, 21nov03 \def\entry{% \begingroup % @@ -5070,38 +5198,46 @@ end % affect previous text. \par % - % Do not fill out the last line with white space. - \parfillskip = 0in - % % No extra space above this paragraph. \parskip = 0in % + % When reading the text of entry, convert explicit line breaks + % from @* into spaces. The user might give these in long section + % titles, for instance. + \def\*{\unskip\space\ignorespaces}% + \def\entrybreak{\hfil\break}% + % + % A bit of stretch before each entry for the benefit of balancing + % columns. + \vskip 0pt plus0.5pt + % + % Badness calculation for paragraph affected by - + % How much \indexdotfill is stretched, or how much \parfillskip is shrunk + % Number of lines (\linepenalty) + % % Do not prefer a separate line ending with a hyphen to fewer lines. \finalhyphendemerits = 0 % - % \hangindent is only relevant when the entry text and page number - % don't both fit on one line. In that case, bob suggests starting the - % dots pretty far over on the line. Unfortunately, a large - % indentation looks wrong when the entry text itself is broken across - % lines. So we use a small indentation and put up with long leaders. + % Word spacing - no stretch + \spaceskip=\fontdimen2\font minus \fontdimen4\font % - % \hangafter is reset to 1 (which is the value we want) at the start - % of each paragraph, so we need not do anything with that. - \hangindent = 2em + \linepenalty=1000 % Discourage line breaks. + \hyphenpenalty=5000 % Discourage hyphenation. % - % When the entry text needs to be broken, just fill out the first line - % with blank space. - \rightskip = 0pt plus1fil + % Ragged right margin, but not for the last line with the leaders in it. + % When an index entry spans lines, this stretch competes with the stretch + % in \indexdotfill to determine how the line will be split. + \rightskip=\entryrightmargin + \advance\rightskip by 0pt plus .6\hsize % - % A bit of stretch before each entry for the benefit of balancing - % columns. - \vskip 0pt plus1pt - % - % When reading the text of entry, convert explicit line breaks - % from @* into spaces. The user might give these in long section - % titles, for instance. - \def\*{\unskip\space\ignorespaces}% - \def\entrybreak{\hfil\break}% + % \parfillskip is at the end of the line with the page number + \parfillskip=0pt + % Cancel the \rightskip stretch + \advance \parfillskip by 0pt plus -.6\hsize + % Determine how far we can stretch into the margin. + % This allows, e.g., "Appendix H GNU Free Documentation License" to fit + % on one line. + \advance \parfillskip by 0pt minus .6\entryrightmargin % % Swallow the left brace of the text (first parameter): \afterassignment\doentry @@ -5109,6 +5245,8 @@ end } \def\entrybreak{\unskip\space\ignorespaces}% \def\doentry{% + % Save the text of the entry in a \vtop. + \global\setbox\entryindexbox=\vtop\bgroup \bgroup % Instead of the swallowed brace. \noindent \aftergroup\finishentry @@ -5122,32 +5260,73 @@ end % cursed by a Unix daemon. \setbox\boxA = \hbox{#1}% \ifdim\wd\boxA = 0pt - \ % + \null\nobreak\hfill\ % \else % - % If we must, put the page number on a line of its own, and fill out - % this line with blank space. (The \hfil is overwhelmed with the - % fill leaders glue in \indexdotfill if the page number does fit.) - \hfil\penalty50 \null\nobreak\indexdotfill % Have leaders before the page number. % - % The `\ ' here is removed by the implicit \unskip that TeX does as - % part of (the primitive) \par. Without it, a spurious underfull - % \hbox ensues. \ifpdf - \pdfgettoks#1.% - \ \the\toksA + \pdfgettoks#1.% + \hskip\skip\thinshrinkable\the\toksA \else - \ #1% + \hskip\skip\thinshrinkable #1% \fi \fi + % Parameters for formatting this paragraph, reset for each paragraph. + % + % \hangindent is only relevant when the entry text and page number + % don't both fit on one line. In that case, bob suggests starting the + % dots pretty far over on the line. Unfortunately, a large + % indentation looks wrong when the entry text itself is broken across + % lines. So we use a small indentation and put up with long leaders. + % + \hangafter = 1 + \hangindent = 1em \par + \egroup % The \vtop \endgroup + % delay text of entry until after penalty + \bgroup\aftergroup\insertindexentrybox + \entryorphanpenalty +} + +\newskip\thinshrinkable +\skip\thinshrinkable=.15em minus .15em + +\newbox\entryindexbox +\def\insertindexentrybox{% +\lineskip=.8ex plus .6ex % This comes into effect when the \vtop has a large + % depth due to the paragraph in it having several + % lines. +\box\entryindexbox} + +% Default is no penalty +\let\entryorphanpenalty\egroup + +% Used from \printindex. \firsttoken should be the first token +% after the \entry. If it's not another \entry, we are at the last +% line of a group of index entries, so insert a penalty to discourage +% orphaned index entries. +\long\def\indexorphanpenalty{% + \def\isentry{\entry}% + \ifx\firsttoken\isentry + \else + \unskip\penalty 9000 + % The \unskip here stops breaking before the glue. It relies on the + % \vskip above being there, otherwise there is an error + % "You can't use `\unskip' in vertical mode". There has to be glue + % in the current vertical list that hasn't been added to the + % "current page". See Chapter 24 of the TeXbook. This contradicts + % Section 8.3.7 in "TeX by Topic," though. + \fi + \egroup % now comes the box added with \aftergroup } % Like plain.tex's \dotfill, except uses up at least 1 em. +% Using a finite stretch encourages several words to appear on a second line +% if the entry is broken. \def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill} + \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus .4\hsize} \def\primary #1{\line{#1\hfil}} @@ -5174,6 +5353,9 @@ end \newbox\partialpage \newdimen\doublecolumnhsize +\newtoks\savedtopmark % Used in \begindoublecolumns +\newtoks\savedfirstmark + \def\begindoublecolumns{\begingroup % ended by \enddoublecolumns % Grab any single-column material above us. \output = {% @@ -5194,9 +5376,23 @@ end \unvbox\PAGE \kern-\topskip \kern\baselineskip }% + % Save \topmark and \firstmark + \global\savedtopmark=\expandafter{\topmark}% + \global\savedfirstmark=\expandafter{\firstmark}% }% \eject % run that output routine to set \partialpage % + % We recover the two marks that the last output routine saved in order + % to propagate the information in marks added around a chapter heading, + % which could be otherwise be lost by the time the final page is output. + % + \mark{\the\savedtopmark}% Only mark in page passed to following \output. + \output = {% + \setbox0=\box\PAGE % clear box 255 + }abc\eject + % + \mark{\the\savedfirstmark}% + % % Use the double-column output routine for subsequent pages. \output = {\doublecolumnout}% % @@ -5227,7 +5423,7 @@ end } % The double-column output routine for all double-column pages except -% the last. +% the last, which is done by \balancecolumns. % \def\doublecolumnout{% \splittopskip=\topskip \splitmaxdepth=\maxdepth @@ -5309,28 +5505,47 @@ end \pagegoal = \vsize } % -% Called at the end of the double column material. +% Only called for the last of the double column material. \doublecolumnout +% does the others. \def\balancecolumns{% \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120. \dimen@ = \ht0 \advance\dimen@ by \topskip \advance\dimen@ by-\baselineskip - \divide\dimen@ by 2 % target to split to - %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}% - \splittopskip = \topskip - % Loop until we get a decent breakpoint. - {% - \vbadness = 10000 - \loop - \global\setbox3 = \copy0 - \global\setbox1 = \vsplit3 to \dimen@ - \ifdim\ht3>\dimen@ - \global\advance\dimen@ by 1pt - \repeat - }% - %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}% - \setbox0=\vbox to\dimen@{\unvbox1}% - \setbox2=\vbox to\dimen@{\unvbox3}% + \ifdim\dimen@<14\baselineskip + % Don't split a short final column in two. + \setbox2=\vbox{}% + \else + \divide\dimen@ by 2 % target to split to + \dimen@ii = \dimen@ + \splittopskip = \topskip + % Loop until the second column is no higher than the first + {% + \vbadness = 10000 + \loop + \global\setbox3 = \copy0 + \global\setbox1 = \vsplit3 to \dimen@ + % Remove glue from bottom of first column to + % make sure it is higher than the second. + \global\setbox1 = \vbox{\unvbox1\unpenalty\unskip}% + \ifdim\ht3>\ht1 + \global\advance\dimen@ by 1pt + \repeat + }% + \multiply\dimen@ii by 4 + \divide\dimen@ii by 5 + \ifdim\ht3<\dimen@ii + % Column heights are too different, so don't make their bottoms + % flush with each other. The glue at the end of the second column + % allows a second column to stretch, reducing the difference in + % height between the two. + \setbox0=\vbox to\dimen@{\unvbox1\vfill}% + \setbox2=\vbox to\dimen@{\unvbox3\vskip 0pt plus 0.3\ht0}% + \else + \setbox0=\vbox to\dimen@{\unvbox1}% + \setbox2=\vbox to\dimen@{\unvbox3}% + \fi + \fi % \pagesofar } @@ -5351,6 +5566,10 @@ end \let\lastnode=\empty % no node to associate with \writetocentry{part}{#1}{}% but put it in the toc \headingsoff % no headline or footline on the part page + % This outputs a mark at the end of the page that clears \thischapter + % and \thissection, as is done in \startcontents. + \let\pchapsepmacro\relax + \chapmacro{}{Yomitfromtoc}{}% \chapoddpage \endgroup } @@ -5595,9 +5814,6 @@ end % @centerchap is like @unnumbered, but the heading is centered. \outer\parseargdef\centerchap{% - % Well, we could do the following in a group, but that would break - % an assumption that \chapmacro is called at the outermost level. - % Thus we are safer this way: --kasal, 24feb04 \let\centerparametersmaybe = \centerparameters \unnmhead0{#1}% \let\centerparametersmaybe = \relax @@ -5721,7 +5937,11 @@ end % Define plain chapter starts, and page on/off switching for it. \def\chapbreak{\dobreak \chapheadingskip {-4000}} + +% Start a new page \def\chappager{\par\vfill\supereject} + +% \chapoddpage - start on an odd page for a new chapter % Because \domark is called before \chapoddpage, the filler page will % get the headings for the next chapter, which is wrong. But we don't % care -- we just disable all headings on the filler page. @@ -5757,7 +5977,7 @@ end \CHAPPAGon -% Chapter opening. +% \chapmacro - Chapter opening. % % #1 is the text, #2 is the section type (Ynumbered, Ynothing, % Yappendix, Yomitfromtoc), #3 the chapter number. @@ -6151,7 +6371,7 @@ end \savepageno = \pageno \begingroup % Set up to handle contents files properly. \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -\contentsrightmargin % Don't use the full line length. + \entryrightmargin=\contentsrightmargin % Don't use the full line length. % % Roman numerals for page numbers. \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi @@ -6256,7 +6476,7 @@ end % Chapters, in the main contents. \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} -% + % Chapters, in the short toc. % See comments in \dochapentry re vbox and related settings. \def\shortchapentry#1#2#3#4{% @@ -6271,7 +6491,7 @@ end \setbox0 = \hbox{\putwordAppendix{} M}% \hbox to \wd0{\putwordAppendix{} #1\hss}} % -\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}} +\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}} % Unnumbered chapters. \def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}} @@ -6304,6 +6524,8 @@ end \def\dochapentry#1#2{% \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip \begingroup + % Move the page numbers slightly to the right + \advance\entryrightmargin by -0.05em \chapentryfonts \tocentry{#1}{\dopageno\bgroup#2\egroup}% \endgroup @@ -6416,6 +6638,24 @@ end % start of the next paragraph will insert \parskip. % \def\aboveenvbreak{{% + % =10000 instead of <10000 because of a special case in \itemzzz and + % \sectionheading, q.v. + \ifnum \lastpenalty=10000 \else + \advance\envskipamount by \parskip + \endgraf + \ifdim\lastskip<\envskipamount + \removelastskip + \ifnum\lastpenalty<10000 + % Penalize breaking before the environment, because preceding text + % often leads into it. + \penalty100 + \fi + \vskip\envskipamount + \fi + \fi +}} + +\def\afterenvbreak{{% % =10000 instead of <10000 because of a special case in \itemzzz and % \sectionheading, q.v. \ifnum \lastpenalty=10000 \else @@ -6431,8 +6671,6 @@ end \fi }} -\let\afterenvbreak = \aboveenvbreak - % \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will % also clear it, so that its embedded environments do the narrowing again. \let\nonarrowing=\relax @@ -6476,7 +6714,7 @@ end % collide with the section heading. \ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi % - \vbox\bgroup + \setbox\groupbox=\vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop \hbox\bgroup @@ -6500,6 +6738,7 @@ end \egroup \cartbot \egroup + \addgroupbox \checkinserts } @@ -6977,7 +7216,7 @@ end \temp } -% \domakedefun \deffn \deffnx \deffnheader +% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) } % % Define \deffn and \deffnx, without parameters. % \deffnheader has to be defined explicitly. @@ -7315,34 +7554,44 @@ end } \fi -\def\scanmacro#1{\begingroup +\let\aftermacroxxx\relax +\def\aftermacro{\aftermacroxxx} + +% alias because \c means cedilla in @tex or @math +\let\texinfoc=\c + +% Used at the time of macro expansion. +% Argument is macro body with arguments substituted +\def\scanmacro#1{% \newlinechar`\^^M \let\xeatspaces\eatspaces + % Reduce doubled backslashes to one + \def\xprocessmacroarg{\passargtomacro\eatspaces}% % - % Undo catcode changes of \startcontents and \doprintindex - % When called from @insertcopying or (short)caption, we need active - % backslash to get it printed correctly. Previously, we had - % \catcode`\\=\other instead. We'll see whether a problem appears - % with macro expansion. --kasal, 19aug04 - \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ - % - % ... and for \example: - \spaceisspace + % Process the macro body under the current catcode regime. + \scantokens{#1\texinfoc}\aftermacro% % - % The \empty here causes a following catcode 5 newline to be eaten as - % part of reading whitespace after a control sequence. It does not - % eat a catcode 13 newline. There's no good way to handle the two - % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX - % would then have different behavior). See the Macro Details node in - % the manual for the workaround we recommend for macros and - % line-oriented commands. - % - \scantokens{#1\empty}% -\endgroup} + % The \c is to remove the \newlinechar added by \scantokens, and + % can be noticed by \parsearg. + % The \aftermacro allows a \comment at the end of the macro definition + % to duplicate itself past the final \newlinechar added by \scantokens: + % this is used in the definition of \group to comment out a newline. We + % don't do the same for \c to support Texinfo files with macros that ended + % with a @c, which should no longer be necessary. + % We avoid surrounding the call to \scantokens with \bgroup and \egroup + % to allow macros to open or close groups themselves. +} \def\scanexp#1{% + \bgroup + % Undo catcode changes of \startcontents and \printindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. + % FIXME: This may not be needed. + %\catcode`\@=0 \catcode`\\=\active \escapechar=`\@ \edef\temp{\noexpand\scanmacro{#1}}% \temp + \egroup } \newcount\paramno % Count of parameters @@ -7408,7 +7657,6 @@ end \catcode`\+=\other \catcode`\<=\other \catcode`\>=\other - \catcode`\@=\other \catcode`\^=\other \catcode`\_=\other \catcode`\|=\other @@ -7418,37 +7666,29 @@ end \def\scanargctxt{% used for copying and captions, not macros. \scanctxt + \catcode`\@=\other \catcode`\\=\other \catcode`\^^M=\other } \def\macrobodyctxt{% used for @macro definitions \scanctxt + \catcode`\ =\other + \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other \catcode`\^^M=\other \usembodybackslash } -\def\macroargctxt{% used when scanning invocations +% Used when scanning braced macro arguments. Note, however, that catcode +% changes here are ineffectual if the macro invocation was nested inside +% an argument to another Texinfo command. +\def\macroargctxt{% \scanctxt - \catcode`\\=0 + \catcode`\^^M=\other + \catcode`\\=\active } -% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes" -% for the single characters \ { }. Thus, we end up with the "commands" -% that would be written @\ @{ @} in a Texinfo document. -% -% We already have @{ and @}. For @\, we define it here, and only for -% this purpose, to produce a typewriter backslash (so, the @\ that we -% define for @math can't be used with @macro calls): -% -\def\\{\normalbackslash}% -% -% We would like to do this for \, too, since that is what makeinfo does. -% But it is not possible, because Texinfo already has a command @, for a -% cedilla accent. Documents must use @comma{} instead. -% -% \anythingelse will almost certainly be an error of some kind. \def\macrolineargctxt{% used for whole-line arguments without braces \scanctxt @@ -7526,59 +7766,36 @@ end \fi } -% This makes use of the obscure feature that if the last token of a -% is #, then the preceding argument is delimited by -% an opening brace, and that opening brace is not consumed. -% +% \getargs -- Parse the arguments to a @macro line. Set \macname to +% the name of the macro, and \argl to the braced argument list. \def\getargs#1{\getargsxxx#1{}} \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} \def\getmacname#1 #2\relax{\macname={#1}} \def\getmacargs#1{\def\argl{#1}} +% This made use of the feature that if the last token of a +% is #, then the preceding argument is delimited by +% an opening brace, and that opening brace is not consumed. -% For macro processing make @ a letter so that we can make -% private-to-Texinfo macro names. -\edef\texiatcatcode{\the\catcode`\@} -\catcode `@=11\relax - -% Parse the optional {params} list. Set up \paramno and \paramlist -% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH -% in the params list to some hook where the argument is to be expanded. If -% there are less than 10 arguments that hook is to be replaced by ##N where N +% Parse the optional {params} list to @macro or @rmacro. +% Set \paramno to the number of arguments, +% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a +% three-param macro.) Define \macarg.BLAH for each BLAH in the params +% list to some hook where the argument is to be expanded. If there are +% less than 10 arguments that hook is to be replaced by ##N where N % is the position in that list, that is to say the macro arguments are to be % defined `a la TeX in the macro body. % % That gets used by \mbodybackslash (above). % -% We need to get `macro parameter char #' into several definitions. -% The technique used is stolen from LaTeX: let \hash be something -% unexpandable, insert that wherever you need a #, and then redefine -% it to # just before using the token list produced. -% -% The same technique is used to protect \eatspaces till just before -% the macro is used. -% -% If there are 10 or more arguments, a different technique is used, where the -% hook remains in the body, and when macro is to be expanded the body is -% processed again to replace the arguments. -% -% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the -% argument N value and then \edef the body (nothing else will expand because of -% the catcode regime underwhich the body was input). +% If there are 10 or more arguments, a different technique is used: see +% \parsemmanyargdef. % -% If you compile with TeX (not eTeX), and you have macros with 10 or more -% arguments, no macro can have more than 256 arguments (else error). -% \def\parsemargdef#1;{% \paramno=0\def\paramlist{}% \let\hash\relax - \let\xeatspaces\relax + % \hash is redefined to `#' later to get it into definitions + \let\processmacroarg\relax \parsemargdefxxx#1,;,% - % In case that there are 10 or more arguments we parse again the arguments - % list to set new definitions for the \macarg.BLAH macros corresponding to - % each BLAH argument. It was anyhow needed to parse already once this list - % in order to count the arguments, and as macros with at most 9 arguments - % are by far more frequent than macro with 10 or more arguments, defining - % twice the \macarg.BLAH macros does not cost too much processing power. \ifnum\paramno<10\relax\else \paramno0\relax \parsemmanyargdef@@#1,;,% 10 or more arguments @@ -7589,10 +7806,47 @@ end \else \let\next=\parsemargdefxxx \advance\paramno by 1 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname - {\xeatspaces{\hash\the\paramno}}% + {\processmacroarg{\hash\the\paramno}}% \edef\paramlist{\paramlist\hash\the\paramno,}% \fi\next} +% \parsemacbody, \parsermacbody +% +% Read recursive and nonrecursive macro bodies. (They're different since +% rec and nonrec macros end differently.) +% +% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro +% body to be transformed. +% Set \macrobody to the body of the macro, and call \defmacro. +% +{\catcode`\ =\other\long\gdef\parsemacbody#1@end macro{% +\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}% +{\catcode`\ =\other\long\gdef\parsermacbody#1@end rmacro{% +\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}% + +% Make @ a letter, so that we can make private-to-Texinfo macro names. +\edef\texiatcatcode{\the\catcode`\@} +\catcode `@=11\relax + +%%%%%%%%%%%%%% Code for > 10 arguments only %%%%%%%%%%%%%%%%%% + +% If there are 10 or more arguments, a different technique is used, where the +% hook remains in the body, and when macro is to be expanded the body is +% processed again to replace the arguments. +% +% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the +% argument N value and then \edef the body (nothing else will expand because of +% the catcode regime under which the body was input). +% +% If you compile with TeX (not eTeX), and you have macros with 10 or more +% arguments, no macro can have more than 256 arguments (else error). +% +% In case that there are 10 or more arguments we parse again the arguments +% list to set new definitions for the \macarg.BLAH macros corresponding to +% each BLAH argument. It was anyhow needed to parse already once this list +% in order to count the arguments, and as macros with at most 9 arguments +% are by far more frequent than macro with 10 or more arguments, defining +% twice the \macarg.BLAH macros does not cost too much processing power. \def\parsemmanyargdef@@#1,{% \if#1;\let\next=\relax \else @@ -7608,15 +7862,6 @@ end \advance\paramno by 1\relax \fi\next} -% These two commands read recursive and nonrecursive macro bodies. -% (They're different since rec and nonrec macros end differently.) -% -\catcode `\@\texiatcatcode -\long\def\parsemacbody#1@end macro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% -\long\def\parsermacbody#1@end rmacro% -{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% -\catcode `\@=11\relax \let\endargs@\relax \let\nil@\relax @@ -7645,9 +7890,6 @@ end \getargvals@@ \fi } - -% Internal for \getargsval@. -% \def\getargvals@@{% \ifx\paramlist\nilm@ % Some sanity check needed here that \argvaluelist is also empty. @@ -7755,16 +7997,7 @@ end \next } -% Save the token stack pointer into macro #1: -\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}} -% -% Restore the token stack pointer from number in macro #1: -\def\texirestoretoksstackpoint#1{\expandafter\mathchardef - \expandafter\@cclvi#1\relax} -% Variant \newtoks that can be used non-\outer: -\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi} - -% Tailing missing arguments are set to empty. +% Trailing missing arguments are set to empty. % \def\setemptyargvalues@{% \ifx\paramlist\nilm@ @@ -7795,81 +8028,115 @@ end \long\def#2{#4}% } -% This defines a Texinfo @macro. There are eight cases: recursive and -% nonrecursive macros of zero, one, up to nine, and many arguments. -% Much magic with \expandafter here. + +%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%% + + + +% Remove following spaces at the expansion stage. +% This works because spaces are discarded before each argument when TeX is +% getting the arguments for a macro. +% This must not be immediately followed by a }. +\long\def\gobblespaces#1{#1} + +% This defines a Texinfo @macro or @rmacro, called by \parsemacbody. +% \macrobody has the body of the macro in it, with placeholders for +% its parameters, looking like "\processmacroarg{\hash 1}". +% \paramno is the number of parameters +% \paramlist is a TeX parameter text, e.g. "#1,#2,#3," +% There are eight cases: recursive and nonrecursive macros of zero, one, +% up to nine, and many arguments. % \xdef is used so that macro definitions will survive the file -% they're defined in; @include reads the file inside a group. +% they're defined in: @include reads the file inside a group. % \def\defmacro{% \let\hash=##% convert placeholders to macro parameter chars - \ifrecursive + \ifnum\paramno=1 + \def\processmacroarg{\gobblespaces}% + % This removes the pair of braces around the argument. We don't + % use \eatspaces, because this can cause ends of lines to be lost + % when the argument to \eatspaces is read, leading to line-based + % commands like "@itemize" not being read correctly. + \else + \def\processmacroarg{\xprocessmacroarg}% + \let\xprocessmacroarg\relax + \fi + \ifrecursive %%%%%%%%%%%%%% Recursive %%%%%%%%%%%%%%%%%%%%%%%%%%%%% \ifcase\paramno % 0 \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\scanmacro{\temp}}% + \noexpand\scanmacro{\macrobody}}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% \bgroup \noexpand\braceorline - \expandafter\noexpand\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% - \egroup\noexpand\scanmacro{\temp}}% + \expandafter\noexpand\csname\the\macname @@@\endcsname}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname{% + \noexpand\gobblespaces##1\empty}% + % The \empty is for \gobblespaces in case #1 is empty + }% + \expandafter\xdef\csname\the\macname @@@@\endcsname##1{% + \egroup\noexpand\scanmacro{\macrobody}}% \else \ifnum\paramno<10\relax % at most 9 \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \noexpand\csname\the\macname @@\endcsname}% + \expandafter\xdef\csname\the\macname @@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \csname\the\macname @@@\endcsname + \paramlist{\egroup\noexpand\scanmacro{\macrobody}}% \else % 10 or more \expandafter\xdef\csname\the\macname\endcsname{% \noexpand\getargvals@{\the\macname}{\argl}% }% - \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble \fi \fi - \else + \else %%%%%%%%%%%%%%%%%%%%%% Non-recursive %%%%%%%%%%%%%%%%%%%%%%%%%% \ifcase\paramno % 0 \expandafter\xdef\csname\the\macname\endcsname{% - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% + \noexpand\scanmacro{\macrobody}}% \or % 1 \expandafter\xdef\csname\the\macname\endcsname{% \bgroup \noexpand\braceorline - \expandafter\noexpand\csname\the\macname xxx\endcsname}% - \expandafter\xdef\csname\the\macname xxx\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@\endcsname}% + \expandafter\xdef\csname\the\macname @@@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@@\endcsname{% + \noexpand\gobblespaces##1\empty}% + % The \empty is for \gobblespaces in case #1 is empty + }% + \expandafter\xdef\csname\the\macname @@@@\endcsname##1{% \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% + \noexpand\scanmacro{\macrobody}% + }% \else % at most 9 \ifnum\paramno<10\relax \expandafter\xdef\csname\the\macname\endcsname{% \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\noexpand\csname\the\macname @@\endcsname}% + \expandafter\xdef\csname\the\macname @@\endcsname##1{% + \expandafter\noexpand\csname\the\macname @@@\endcsname ##1,}% \expandafter\expandafter \expandafter\xdef \expandafter\expandafter - \csname\the\macname xxx\endcsname + \csname\the\macname @@@\endcsname \paramlist{% \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% + \noexpand\scanmacro{\macrobody}% + }% \else % 10 or more: \expandafter\xdef\csname\the\macname\endcsname{% \noexpand\getargvals@{\the\macname}{\argl}% }% - \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .body\endcsname\macrobody \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse \fi \fi @@ -7879,16 +8146,86 @@ end \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} + +{\catcode`\@=0 \catcode`\\=13 +@catcode`@_=11 + +% Call #1 with a list of tokens #2, with any doubled backslashes in #2 +% compressed to one. +@gdef@passargtomacro#1#2{% + @def@the_macro{#1}% + @def@pending_backslash{}% + @def@finish{@finish}% + @def@arg_result{}% + @let@next_token=@relax + @add_segment#2\@finish\% +} + +% Input stream is just after a backslash. If the next token is not a +% backslash, process the rest of the argument; otherwise, remove the next +% token. +@gdef@look_ahead{% + @futurelet@next_token@look_aheadzzz} +@gdef@look_aheadzzz{% + @ifx@next_token\% + @let@next=@gobble_and_check_finish + @else + @let@next=@add_segment + @fi@next +} + +% Double backslash found. Add a single backslash here. +@gdef@gobble_and_check_finish#1{% + @add_the_backslash + @def@pending_backslash{}% + @futurelet@next_token@add_segment +} + +% append a backslash to \arg_result +@gdef@add_the_backslash{% + @expandafter@gdef@expandafter@arg_result@expandafter{@arg_result\}% +} + +% Input stream is either at the start of the argument, or just after a +% backslash sequence, either a lone backslash, or a doubled backslash. +% \next_token contains the first token in the input stream: if it is \finish, +% finish; otherwise, append to \arg_result the segment of the argument up until +% the next backslash. \pending_backslash contains a backslash to represent +% a backslash just before the start of the input stream that has not been +% added to \arg_result. +@gdef@add_segment#1\{% +@ifx@next_token@finish + @let@next=@call_the_macro% +@else + @let@next=@look_ahead + % + % append to @arg_result + % token list registers might be better + @expandafter@expandafter@expandafter@gdef + @expandafter@expandafter@expandafter@arg_result + @expandafter@expandafter@expandafter{% + @expandafter@arg_result + @pending_backslash#1}% + @def@pending_backslash{\}% +@fi@next} + +@gdef@call_the_macro{@expandafter@the_macro@expandafter{@arg_result}} + +} + % \braceorline MAC is used for a one-argument macro MAC. It checks % whether the next non-whitespace character is a {. It sets the context % for reading the argument (slightly different in the two cases). Then, -% to read the argument, in the whole-line case, it then calls the -% regular \parsearg MAC; in the lbrace case, it just calls MAC itself. +% to read the argument, in the whole-line case, it then calls the regular +% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC. % \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% - \ifx\nchar\bgroup\macroargctxt - \else\macrolineargctxt\expandafter\parsearg + \ifx\nchar\bgroup + \macroargctxt + \expandafter\passargtomacro + \else + \macrolineargctxt\expandafter\parsearg \fi \macnamexxx} @@ -7970,6 +8307,7 @@ end \pdfmkdest{#1}% \iflinks {% + \requireauxfile \atdummies % preserve commands, but don't expand them \edef\writexrdef##1##2{% \write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef @@ -8009,9 +8347,12 @@ end % node name, #4 the name of the Info file, #5 the name of the printed % manual. All but the node name can be omitted. % -\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} -\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} -\def\ref#1{\xrefX[#1,,,,,,,]} +\def\pxref{\putwordsee{} \xrefXX} +\def\xref{\putwordSee{} \xrefXX} +\def\ref{\xrefXX} + +\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX} +\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]} % \newbox\toprefbox \newbox\printedrefnamebox @@ -8155,6 +8496,12 @@ end % % output the `page 3'. \turnoffactive \putwordpage\tie\refx{#1-pg}{}% + \ifx,\tokenafterxref + \else\ifx.\tokenafterxref + \else\ifx;\tokenafterxref + \else\ifx)\tokenafterxref + \else,% add a , if xref not followed by punctuation + \fi\fi\fi\fi \fi\fi \fi \endlink @@ -8225,6 +8572,7 @@ end % If its value is nonempty, SUFFIX is output afterward. % \def\refx#1#2{% + \requireauxfile {% \indexnofonts \otherbackslash @@ -8288,6 +8636,23 @@ end \fi } +% If working on a large document in chapters, it is convenient to +% be able to disable indexing, cross-referencing, and contents, for test runs. +% This is done with @novalidate at the beginning of the file. +% +\newif\iflinks \linkstrue % by default we want the aux files. +\let\novalidate = \linksfalse + +% Used when writing to the aux file, or when using data from it. +\def\requireauxfile{% + \iflinks + \tryauxfile + % Open the new aux file. TeX will close it automatically at exit. + \immediate\openout\auxfile=\jobname.aux + \fi + \global\let\requireauxfile=\relax % Only do this once. +} + % Read the last existing aux file, if any. No error if none exists. % \def\tryauxfile{% @@ -8761,6 +9126,7 @@ end % \floatlabel-lof. Besides \floatident, we include the short % caption if specified, else the full caption if specified, else nothing. {% + \requireauxfile \atdummies % % since we read the caption text in the macro world, where ^^M @@ -10186,8 +10552,8 @@ directory should work if nowhere else does.} \def\activedoublequote{{\tt\char34}} \let"=\activedoublequote \catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde -\chardef\hat=`\^ -\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat +\chardef\hatchar=`\^ +\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat \catcode`\_=\active \def_{\ifusingtt\normalunderscore\_} @@ -10204,6 +10570,8 @@ directory should work if nowhere else does.} \catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr \catcode`\+=\active \def+{{\tt \char 43}} \catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix +\catcode`\-=\active \let-=\normaldash + % used for headline/footline in the output routine, in case the page % breaks in the middle of an @tex block. @@ -10218,12 +10586,6 @@ directory should work if nowhere else does.} % in principle, all other definitions in \tex have to be undone too. } -% If a .fmt file is being used, characters that might appear in a file -% name cannot be active until we have parsed the command line. -% So turn them off again, and have \everyjob (or @setfilename) turn them on. -% \otherifyactive is called near the end of this file. -\def\otherifyactive{\catcode`+=\other \catcode`\_=\other} - % Used sometimes to turn off (effectively) the active characters even after % parsing them. \def\turnoffactive{% @@ -10242,23 +10604,22 @@ directory should work if nowhere else does.} % \doublebackslash is two of them (for the pdf outlines). {\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}} -% In texinfo, backslash is an active character; it prints the backslash +% In Texinfo, backslash is an active character; it prints the backslash % in fixed width font. \catcode`\\=\active % @ for escape char from now on. -% The story here is that in math mode, the \char of \backslashcurfont -% ends up printing the roman \ from the math symbol font (because \char -% in math mode uses the \mathcode, and plain.tex sets -% \mathcode`\\="026E). It seems better for @backslashchar{} to always -% print a typewriter backslash, hence we use an explicit \mathchar, +% Print a typewriter backslash. For math mode, we can't simply use +% \backslashcurfont: the story here is that in math mode, the \char +% of \backslashcurfont ends up printing the roman \ from the math symbol +% font (because \char in math mode uses the \mathcode, and plain.tex +% sets \mathcode`\\="026E). Hence we use an explicit \mathchar, % which is the decimal equivalent of "715c (class 7, e.g., use \fam; % ignored family value; char position "5C). We can't use " for the % usual hex value because it has already been made active. -@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} -@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents. -% On startup, @fixbackslash assigns: -% @let \ = @normalbackslash +@def@ttbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} +@let@backslashchar = @ttbackslash % @backslashchar{} is for user documents. + % \rawbackslash defines an active \ to do \backslashcurfont. % \otherbackslash defines an active \ to be a literal `\' character with % catcode other. We switch back and forth between these. @@ -10266,8 +10627,7 @@ directory should work if nowhere else does.} @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of -% the literal character `\'. Also revert - to its normal character, in -% case the active - from code has slipped in. +% the literal character `\'. % {@catcode`- = @active @gdef@normalturnoffactive{% @@ -10278,40 +10638,66 @@ directory should work if nowhere else does.} @let+=@normalplus @let<=@normalless @let>=@normalgreater - @let\=@normalbackslash @let^=@normalcaret @let_=@normalunderscore @let|=@normalverticalbar @let~=@normaltilde + @let\=@ttbackslash @markupsetuplqdefault @markupsetuprqdefault @unsepspaces } } -% Make _ and + \other characters, temporarily. -% This is canceled by @fixbackslash. -@otherifyactive +% If a .fmt file is being used, characters that might appear in a file +% name cannot be active until we have parsed the command line. +% So turn them off again, and have @fixbackslash turn them back on. +@catcode`+=@other @catcode`@_=@other +% \enablebackslashhack - allow file to begin `\input texinfo' +% % If a .fmt file is being used, we don't want the `\input texinfo' to show up. % That is what \eatinput is for; after that, the `\' should revert to printing % a backslash. -% -@gdef@eatinput input texinfo{@fixbackslash} -@global@let\ = @eatinput +% If the file did not have a `\input texinfo', then it is turned off after +% the first line; otherwise the first `\' in the file would cause an error. +% This is used on the very last line of this file, texinfo.tex. +% We also use @c to call @fixbackslash, in case ends of lines are hidden. +{ +@catcode`@^=7 +@catcode`@^^M=13@gdef@enablebackslashhack{% + @global@let\ = @eatinput% + @catcode`@^^M=13% + @def@c{@fixbackslash@c}% + @def ^^M{@let^^M@secondlinenl}% + @gdef @secondlinenl{@let^^M@thirdlinenl}% + @gdef @thirdlinenl{@fixbackslash}% +}} + +{@catcode`@^=7 @catcode`@^^M=13% +@gdef@eatinput input texinfo#1^^M{@fixbackslash}} -% On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\' in the file would cause an error. This macro tries to fix -% that, assuming it is called before the first `\' could plausibly occur. -% Also turn back on active characters that might appear in the input -% file name, in case not using a pre-dumped format. -% @gdef@fixbackslash{% - @ifx\@eatinput @let\ = @normalbackslash @fi + @ifx\@eatinput @let\ = @ttbackslash @fi + @catcode13=5 % regular end of line + @let@c=@texinfoc + % Also turn back on active characters that might appear in the input + % file name, in case not using a pre-dumped format. @catcode`+=@active @catcode`@_=@active + % + % If texinfo.cnf is present on the system, read it. + % Useful for site-wide @afourpaper, etc. This macro, @fixbackslash, gets + % called at the beginning of every Texinfo file. Not opening texinfo.cnf + % directly in this file, texinfo.tex, makes it possible to make a format + % file for Texinfo. + % + @openin 1 texinfo.cnf + @ifeof 1 @else @input texinfo.cnf @fi + @closein 1 } + % Say @foo, not \foo, in error messages. @escapechar = `@@ @@ -10351,3 +10737,4 @@ directory should work if nowhere else does.} @ignore arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115 @end ignore +@enablebackslashhack -- cgit v1.2.3