From 63e3d08cb2613038c3bdef96d2932629e398b797 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Wed, 11 Jan 2006 23:58:57 +0000 Subject: trunk/Master/texmf-dist/source/latex/vrsion git-svn-id: svn://tug.org/texlive/trunk@584 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/source/latex/vrsion/00readme.vrs | 28 + Master/texmf-dist/source/latex/vrsion/vrsion.dtx | 726 +++++++++++++++++++++ Master/texmf-dist/source/latex/vrsion/vrsion.ins | 50 ++ 3 files changed, 804 insertions(+) create mode 100644 Master/texmf-dist/source/latex/vrsion/00readme.vrs create mode 100644 Master/texmf-dist/source/latex/vrsion/vrsion.dtx create mode 100644 Master/texmf-dist/source/latex/vrsion/vrsion.ins (limited to 'Master/texmf-dist') diff --git a/Master/texmf-dist/source/latex/vrsion/00readme.vrs b/Master/texmf-dist/source/latex/vrsion/00readme.vrs new file mode 100644 index 00000000000..2757c47afab --- /dev/null +++ b/Master/texmf-dist/source/latex/vrsion/00readme.vrs @@ -0,0 +1,28 @@ + +This is the file `00readme.vrs', which accompanies the `vrsion' +package distribution. This package was previously called +`version', but was renamed to minimize the confusion with +the LaTeX 2.09 package `version' by Stephen Bellatoni. My +apologizes for the trouble this may cause the users. + +The package defines a command which produces +a version number in the .dvi-file when LaTeX is run. To use the +package, run LaTeX on `vrsion.ins', this produces the file +`vrsion.sty' which contains the macro definitions. To obtain the +userguide and documentation, run LaTeX on `vrsion.dtx'. + +The 'vrsion' package consists of two files: + vrsion.ins - the installation driver + vrsion.dtx - the macro code and instructions on how to use + the package in `docstrip'-able format. +Anyone is free to re-distribute these files provided the restrictions +mentioned in 'vrsion.ins' are obeyed. These are mainly that the +two files always must be distributed together and that noone is +allowed to distribute the files for profit. + +Inquiries can be sent to: . +This file last modified on 1997/02/22. + +____________________________________________________________________ +Copyright (c) 1997 by Mats Dahlgren. + diff --git a/Master/texmf-dist/source/latex/vrsion/vrsion.dtx b/Master/texmf-dist/source/latex/vrsion/vrsion.dtx new file mode 100644 index 00000000000..91f5ed1889d --- /dev/null +++ b/Master/texmf-dist/source/latex/vrsion/vrsion.dtx @@ -0,0 +1,726 @@ +% +% \iffalse +% +% The first part is a comment to the reader(s) of `vrsion.dtx'. +% +% vrsion.dtx version 1.41, February 22, 1997 +% (c) 1994-1997 by Mats Dahlgren (matsd@homenet.se) +% +% Please see the information in file `vrsion.ins' on how you +% may use and (re-)distribute this file. Run LaTeX on the file +% `vrsion.ins' to get a .sty-file and on vrsion.dtx to obtain the +% instructions. +% +% This file may NOT be distributed if not accompanied by 'vrsion.ins'. +% +%<*driver> +\documentclass[a4paper]{ltxdoc} +\textwidth=150mm +\textheight=210mm +\topmargin=0mm +\oddsidemargin=5mm +\evensidemargin=5mm +\RecordChanges +%\begin{document} + \DocInput{vrsion.dtx} +% \PrintChanges +\end{document} +% +% \fi +% +% \CheckSum{804} +% +% \def\filename{vrsion.dtx} +% \def\fileversion{1.41} +% \def\filedate{1997/02/22}\def\docdate{\filedate} +% \date{\docdate} +% \changes{1.0}{1994/12/28}{First version of `version' package.} +% \changes{1.1}{1995/05/15}{Fixed extra spaces and warning in +% the documentation that \texttt{\textbackslash version} is a fragile +% command. Also changed the name of the package.} +% \changes{1.2}{1995/05/31}{Fixed \textsf{babel} +% incompatibility and made \texttt{\textbackslash version} robust.} +% \changes{1.3}{1996/02/08}{Cosmetics in the installation +% routine, adjustments to changes in \textsf{babel}, making use +% of \textsf{xspace} if loaded, and a working solution to +% problems with \texttt{\textbackslash maketitle} command.} +% \changes{1.4}{1996/06/25}{Fixed incompatibility with the +% \textsf{koma-script} package.} +% \changes{1.41}{1997/02/22}{Upgraded documentation.} +% \MakeShortVerb{\|} +% \title{\textsf{vrsion}\\ -- a \LaTeX{} Macro for version Numbering of +% Files\thanks{This document describes \textsf{vrsion} version +% \fileversion , and was last revised on \docdate.}} +% \author{Mats Dahlgren\\ (\texttt{matsd@homenet.se})} +% \begin{document} +% \maketitle +% \begin{abstract} +% The \textsf{vrsion} package provides a user-friendly way to +% introduce file version numbers in \LaTeX{} documents. +% It remembers the previous version number, also when +% the |.aux|-file is corrupted (due to errors in the +% \LaTeX{} run).\\ \small This file and the package:\ +% Copyright \copyright\ 1994-97 by Mats Dahlgren. All rights +% reserved. +% \end{abstract} +% +% \section{Introduction} +% \DescribeMacro\version +% This package provides one command, |\version|, which +% puts a version number where it appears. The version +% number is increased each time \LaTeX{} is run, +% \textit{i.e.}\ it numbers the |.dvi|-file. If the +% package is loaded but the command |\version| is not +% issued, the present version number is preserved. +% Numbering can be incremented at three different levels: +% units, tenths, and hundreds. A change between two of these +% is obtained by changing the package option. After a change +% of steplength, the previous version number is +% incremented with the new steplength. The version number +% can be held constant by using the command +% \DescribeMacro\keepversion +% |\keepversion|; this enables the version number to be +% printed without being increased. (|\keepversion| can be +% \DescribeMacro\stepversion +% overridden by the command |\stepversion|.) +% +% \section{Userguide} +% \subsection{Requirements} +% The file |vrsion.sty| must be available in the user's +% |TEXINPUTS| directories. It requires \LaTeXe{} of +% 1995/12/01 (or newer). +% +% \subsection{Usage} +% The package is included by stating \\ +% | \usepackage[|\textit{option}|]{vrsion}|\\ +% \DescribeMacro{one} \DescribeMacro{ten} +% \DescribeMacro{hundred} \DescribeMacro{xspace} +% in the document preamble. It can take one of the +% options |one|, |ten|, and |hundred|, and in addition |xspace|. +% To produce a +% version number anywhere in your document you issue the +% \DescribeMacro\version +% command |\version| at the desired place in your \LaTeX{} +% input file.\footnote{Notice that the text ``version'' +% is \textit{not} produced by the +% \texttt{\textbackslash version} command.} The +% version number will then be incremented each time you +% run \LaTeX{} on the file. The command |\version| is +% robust.\footnote{Thanks to Timothy Robertson +% (\texttt{timothyr@cmbr.phys.cmu.edu}) for bringing my +% attention to the problem of \texttt{\textbackslash version} +% being fragile.} Depending on the option +% used, the version number will be an integer (no option +% or option |one|), a number with one decimal (option +% |ten|), or a two-decimal number (option |hundred|). +% If the option |xspace| is specified, the \textsf{xspace} +% package is loaded and its features are benefited from. (If +% the \textsf{xspace} package is loaded by a separate +% |\usepackage| statement or by another package, its features +% are used by \textsf{vrsion}.) +% +% When changing from one option (of |one|, |ten|, or |hundred|) +% to another, the previous +% format of the version number will be changed according +% to the new option. If a smaller increment is +% specified, the next increment will simply append one +% digit |1| to the old version number; \textit{e.g.}\ a +% change from option |ten| to |hundred| after version 3.2 +% will result in version 3.21. If a larger increment is +% specified, the old version number will be truncated +% before the increment; \textit{e.g.}\ a change from +% option |hundred| to |ten| after version 3.25 +% will result in version 3.3. You should (normally) not +% use the command |\version| more once in a document. +% The version number is stored in a file with extension +% `|vrs|' in the default directory. (The full name of this +% file is |\jobname.vrs|.) +% +% If you want your document to contain a version +% number without having it incremented each time +% you run \LaTeX{}, you should issue the command +% \DescribeMacro\keepversion +% |\keepversion| in the document (preamble). This +% switches off the incrementation mechanism and prevents +% the package from writing an updated |.vrs|-file. +% The |\keepversion| command can be cancelled at +% any later place in the document by issuing the +% \DescribeMacro\stepversion +% command |\stepversion|. The action taken by the +% |\version| command is determined by which of these +% two was last issued. +% +% Typically, you would load the \textsf{vrsion} package +% with the desired option and use the command +% |\version| where you want your document to state +% its version number. Normally, you would have the +% |\keepversion| command in the preamble, but +% comment it out on the first \LaTeX{} run when you +% prepare to print a new version and then have the +% |\keepversion| in action during the \LaTeX{} runs +% needed to resolve the references. +% +% When it is desired to repeat the version number +% several times in a document, issue a +% |\keepversion| directly after the first use of +% |\version|. This will then produce the same +% version number at all occurrences; and the version +% number will be incremented according to the use of +% |\keepversion| in the preamble. +% +% If the increase of the version number is to occur +% at any stage later than the fist occurrence of +% |\version|, the occurrence of |\version| +% which is to increase the version number should be +% preceeded by a |\stepversion| command (and +% followed by |\keepversion| to prevent further +% increments). The author can not think of any +% reason why this should be desired, but it can be +% achieved anyway$\ldots$ +% +% \subsection{Known Problems} +% \begin{itemize} +% \item At the present (\filedate), \textsf{vrsion} does not +% work properly with neither the \textsf{letter} nor the +% \textsf{scrlettr} document classes. +% \item The |\vrsion| package is not working properly with the +% |\include{|\textit{file}|}| command; use |\input{|\textit{file}|}| +% instead. +% \item If the command |\version| is issued more than once +% in a document, the version number will be incremented +% at each occurrence and produce different version +% numbers at the different occurrences (unless +% |\keepversion| is in effect). This may typically be a +% problem if you use |\version| in the page header or footer. +% This is avoided if |\keepversion| is issued somewhere on the +% second page. +% \end{itemize} +% +% \section{History} +% The first version of the package was released in late +% December of 1994. The package +% was created with useful help and ideas from Johan +% Fr\"oberg (\texttt{emgion@physchem.kth.se}). \par +% The \textsf{vrsion} package version \fileversion{} has +% been tested with \LaTeXe{} of +% 1996/06/01 running +% \TeX{} 3.14159 under OpenVMS. Please send bug reports +% (see below), corrections, additions, suggestions, +% \textit{etc.}\ to me at \texttt{matsd@physchem.kth.se}. +% +% \subsection{Changes from previous versions} +% +% In \textsf{vrsion} (|version|) version 1.0 the macro +% |\@skrivner| caused extra +% space to be inserted in front of the version number. With +% \textsf{vrsion} version 1.1 and later this is avoided. +% +% In version 1.1 the \textsf{vrsion} package had incompatibility +% problems with the \textsf{babel} package.\footnote{Thanks to Peter +% Ryder (\texttt{ryder@theo.physik.uni-bremen.de}) for +% bringing my attention to this problem.} With \textsf{vrsion} +% version 1.2 this problem is eliminated. Also, the command +% |\version| has been made robust. +% +% In version 1.3, some adjustments to changes in the \textsf{babel} +% package have been made,\footnote{Thanks to Cornelius C.\ Noack +% (\texttt{noack@physik.uni-bremen.de}) for bringing my attention to +% the re-appearance of the \textsf{babel} incompatibility.} +% if the \textsf{xspace} package is +% loaded, its features are made use of. Also, some problems with +% |\maketitle| issuing extra blank page(s) have been +% eliminated,\footnote{Thanks to Ludek Matyska (\texttt{ludek@muni.cz}) +% for pointing out this problem.} it +% seems (at least for the \textsf{article}, \textsf{report}, and +% \textsf{book} classes). Furthermore, some cosmetics +% in the installation routine have been added. +% +% Version 1.4 eliminated an incompatibility with +% the \textsf{koma-script} package. The incompatibility was that +% some features of \textsf{koma-script}'s version of the +% |\maketitle| command were lost when \textsf{vrsion} was +% loaded.\footnote{Thanks to Christofer P.\ Baron +% (\texttt{baron@iml.fgh.de}) for bringing my attention to this +% problem.} Furthermore, some |\typeout| statements have been +% removed and the processing order of some of the macro +% definitions has been changed. +% +% \section{Sending a Bug Report} +% \textsf{vrsion} is most likely to contain bugs. +% Reports of bugs in the package are most welcome. +% When filing a bug report, +% please take the following actions: +% \begin{enumerate} +% \item Ensure your problem is not due to your inputfile; +% \item Ensure your problem is not due to +% your own package(s) or class(es); +% \item Ensure your problem is not covered in the section +% ''Known Problems'' above; +% \item Try to locate the problem by writing a minimal +% \LaTeX{} input file which reproduces the problem. +% Include the command\\ +% | \setcounter{errorcontextlines}{999}|\\ +% in your input; +% \item Run your file through \LaTeX ; +% \item Send a description of your problem, the input file +% and the log file via e-mail to:\\ \hspace*{5mm} +% \texttt{matsd@homenet.se}. +% \end{enumerate} +% \bigskip +% +% {\itshape Enjoy your \LaTeX!\raisebox{-\baselineskip}{mats d.}} +% \StopEventually{\par\vfill\hfill{\scriptsize Copyright +% \copyright{} 1996-97 by Mats Dahlgren.}} +% \newpage +% +% \section{The Code} +% For the interested reader(s), here is a short description +% of the code. +% +% First, the package should identify itself: +% \iffalse +%<*paketkod> +% \fi +% \begin{macrocode} +\NeedsTeXFormat{LaTeX2e}[1995/12/01] +\ProvidesPackage{vrsion}% + [1997/02/22 version numbering of LaTeX files (v.1.41).] +% \end{macrocode} +% \par Some counters and booleans used +% are to be defined first. Also the user commands +% |\keepversion| and |\stepversion|, which only (re-)set +% the |Keepversion| boolean, are defined. +% \begin{macrocode} +\newcounter{versionnr} +\newcounter{versionnrten}[versionnr] +\newcounter{versionnrhundred}[versionnrten] +\@addtoreset{versionnrhundred}{versionnr} +\newif\ifKeepversion \Keepversionfalse +\newif\ifxspc \xspcfalse +\newcommand{\keepversion}{\global\Keepversiontrue} +\newcommand{\stepversion}{\global\Keepversionfalse} +% \end{macrocode} +% \par Next, the options are declared. The declaration of +% option |one| is the default version of the |\version| +% macro. If the boolean +% |Keepversion| (set by the command |\keepversion|) is +% true, no increase of the version number is preformed, +% nor is anything written to the |.vrs|-file. The command +% |\@skrivner| is responsible for writing the |.vrs|-file +% (``skriv ner'' is Swedish for ``write down''). +% \begin{macrocode} +\DeclareOption{one}{% +\DeclareRobustCommand{\version}{% + \ifKeepversion \else + \stepcounter{versionnr}% + \@skrivner + \fi + \theversionnr% + \@ifundefined{xspace}{}{\xspace}% +} +} +% \end{macrocode} +% The |ten| option modifies the |\version| command to +% produce a decimal number and steps the integer version +% number if the decimal part reaches 10. +% \begin{macrocode} +\DeclareOption{ten}{% + \DeclareRobustCommand{\version}{% + \ifKeepversion \else + \stepcounter{versionnrten}% + \ifnum\theversionnrten=10\stepcounter{versionnr} \fi + \@skrivner + \fi + \theversionnr .\theversionnrten% + \@ifundefined{xspace}{}{\xspace}% + } +} +% \end{macrocode} +% The option |hundred| does the same as |ten|, but with +% a two-decimal number. +% \begin{macrocode} +\DeclareOption{hundred}{% + \DeclareRobustCommand{\version}{% + \ifKeepversion \else + \stepcounter{versionnrhundred}% + \ifnum\theversionnrhundred=10\stepcounter{versionnrten} \fi + \ifnum\theversionnrten=10\stepcounter{versionnr} \fi + \@skrivner + \fi + \theversionnr .\theversionnrten\theversionnrhundred% + \@ifundefined{xspace}{}{\xspace}% + } +} +% \end{macrocode} +% The |xspace| option, which only forces the \textsf{xspace} package +% to be loaded, is quite short in the code: +% \begin{macrocode} +\DeclareOption{xspace}{\global\xspctrue} +% \end{macrocode} +% All other options which may be specified are to be +% ignored: +% \begin{macrocode} +\DeclareOption*{\OptionNotUsed} +% \end{macrocode} +% \par Now we can process the options, and -- if requested -- load +% the \textsf{xspace} package. +% \begin{macrocode} +\ExecuteOptions{one} +\ProcessOptions +\ifxspc\RequirePackage{xspace}\fi +% \end{macrocode} +% \par Now the task is to define the internals. The macro +% |\vrsFile| simply holds the name of the |.vrs|-file to +% use. The macro |\@skrivner| writes the version number +% counters to a file +% in a format which is easy to deal with in +% \LaTeX{}, a name-wise change\footnote{This was nessecary +% to make \texttt{vrsion} compatible with \textsf{babel}.} +% of the the ordinary |\label| format. The internal +% macro |\@vrs| is used to avoid problems with label +% change warnings and to avoid trouble with missing +% version number information in the |.aux|-file when +% |\keepversion| is used. As an aid, the dummy-counter +% |VrsNr| is used. +% \begin{macrocode} +\def\vrsFile{\jobname.vrs} +\newwrite\@vrs +\newcounter{VrsNr} +\def\@skrivner{% + \setcounter{VrsNr}{\@partaux}% + \addtocounter{VrsNr}{1}% + \let\@vrs=\theVrsNr% + \immediate\openout\@vrs\vrsFile% + \immediate\write\@vrs{\relax}% + \immediate\write\@vrs{% + \string\vrslabel{versionsnummer}{{\theversionnr}{\thepage}}}% + \immediate\write\@vrs{% + \string\vrslabel{versionsnummertio}{{\theversionnrten}{\thepage}}}% + \immediate\write\@vrs{% + \string\vrslabel{versionsnummerhundra}{{\theversionnrhundred}{\thepage}} +}% + \immediate\closeout\@vrs{}% +} +% \end{macrocode} +% \par\textsf{babel} compatibility +% is obtained by defining special |\label| and |\ref| commands. +% \begin{macrocode} +\@ifundefined{bbl@ref}{\let\vrsref=\ref}{\let\vrsref=\bbl@ref} +\@ifundefined{bbl@newlabel}{\let\vrslabel=\newlabel}% +{\let\vrslabel=\bbl@newlabel} +% \end{macrocode} +% \par If it exists, the file |\jobname.vrs| should +% be read, and the counters set accordingly. If this file +% is missing, the counters should be zero. +% \begin{macrocode} +\IfFileExists{\vrsFile}{\@@input\vrsFile% + \setcounter{versionnr}{\vrsref{versionsnummer}}% + \setcounter{versionnrten}{\vrsref{versionsnummertio}}% + \setcounter{versionnrhundred}{\vrsref{versionsnummerhundra}}% + }{% + \typeout{No file \vrsFile.}% + \setcounter{versionnr}{\z@}% + \setcounter{versionnrten}{\z@}% + \setcounter{versionnrhundred}{\z@}% +} +% \end{macrocode} +% \par To prevent |\maketitle| from creating extra blank pages, +% some commands from the \LaTeXe{} kernel have to be slightly +% modified. To make sure we use the desired definitions, the +% changes are issued in an |\AtBeginDocument| command. (The +% changes are that a few |\newpage| commands have been removed and +% that a |\cleardoublepage| has been removed for the \textsf{book} +% class.) To cope with the incompatibility of the +% \textsf{koma-script} package, different modified definitions are +% used. Which is to be used is tested in an |\@ifundefined| +% statement. +% \begin{macrocode} +\AtBeginDocument{% +\@ifundefined{subject}{% +\if@titlepage + \renewcommand\maketitle{\begin{titlepage}% + \let\footnotesize\small + \let\footnoterule\relax + \let \footnote \thanks + \null\vfil + \vskip 60\p@ + \begin{center}% + {\LARGE \@title \par}% + \vskip 3em% + {\large + \lineskip .75em% + \begin{tabular}[t]{c}% + \@author + \end{tabular}\par}% + \vskip 1.5em% + {\large \@date \par}% + \end{center}\par + \@thanks + \vfil\null + \end{titlepage}% + \setcounter{footnote}{0}% + \global\let\thanks\relax + \global\let\maketitle\relax + \global\let\@thanks\@empty + \global\let\@author\@empty + \global\let\@date\@empty + \global\let\@title\@empty + \global\let\title\relax + \global\let\author\relax + \global\let\date\relax + \global\let\and\relax +} +\else +\renewcommand\maketitle{\par + \begingroup + \renewcommand\thefootnote{\@fnsymbol\c@footnote}% + \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}% + \long\def\@makefntext##1{\parindent 1em\noindent + \hb@xt@1.8em{% + \hss\@textsuperscript{\normalfont\@thefnmark}}##1}% + \if@twocolumn + \ifnum \col@number=\@ne + \@maketitle + \else + \twocolumn[\@maketitle]% + \fi + \else + \global\@topnum\z@ + \@maketitle + \fi + \thispagestyle{plain}\@thanks + \endgroup + \setcounter{footnote}{0}% + \global\let\thanks\relax + \global\let\maketitle\relax + \global\let\@maketitle\relax + \global\let\@thanks\@empty + \global\let\@author\@empty + \global\let\@date\@empty + \global\let\@title\@empty + \global\let\title\relax + \global\let\author\relax + \global\let\date\relax + \global\let\and\relax +} +\def\@maketitle{% + \null + \vskip 2em% + \begin{center}% + \let \footnote \thanks + {\LARGE \@title \par}% + \vskip 1.5em% + {\large + \lineskip .5em% + \begin{tabular}[t]{c}% + \@author + \end{tabular}\par}% + \vskip 1em% + {\large \@date}% + \end{center}% + \par + \vskip 1.5em} +\fi% +\renewenvironment{titlepage}{% + \if@twocolumn + \@restonecoltrue\onecolumn + \else + \@restonecolfalse + \fi + \thispagestyle{empty}% + \setcounter{page}\@ne + }% + {\if@restonecol\twocolumn \else \newpage \fi + \if@twoside\else + \setcounter{page}\@ne + \fi + } +}{% +% \end{macrocode} +% So much for the ordinary \LaTeXe{} kernel code. Next follows +% the code borrowed from the \textsf{koma-script} bundle by Markus +% Kohm,\footnote{Special thanks to Markus Kohm +% (\texttt{Markus\underline{\space}Kohm@ka2.maus.de}) +% for letting me incorporate this +% code.} also with some modifications. +% \begin{macrocode} +\if@titlepage + \newcommand*\maketitle[1][1]{\begin{titlepage}% + \setcounter{page}{#1} + \let\footnotesize\small + \let\footnoterule\relax + \let\footnote\thanks + \ifx\@extratitle\@empty \else + \noindent\@extratitle\next@tpage\thispagestyle{empty} + \fi + \ifx\@titlehead\@empty \else + \noindent\begin{minipage}[t]{\textwidth} + \@titlehead + \end{minipage}\par + \fi + \null\vfill + \begin{center} + \ifx\@subject\@empty \else + {\Large \@subject \par} + \vskip 3em + \fi + {\huge {\sectfont \@title \par}} + \vskip 3em + {\Large \lineskip 0.75em + \begin{tabular}[t]{c} + \@author + \end{tabular}\par} + \vskip 1.5em + {\Large \@date \par} + \vskip \z@ \@plus3fill + {\Large \@publishers \par} + \vskip 3em + \end{center}\par + \@thanks + \vfill\null + \if@twoside\next@tpage + \noindent\begin{minipage}[t]{\textwidth} + \@uppertitleback + \end{minipage}\par + \vfill + \noindent\begin{minipage}[b]{\textwidth} + \@lowertitleback + \end{minipage} + \fi + \ifx\@dedication\@empty \else + \next@tpage\null\vfill + {\centering \Large \@dedication \par} + \vskip \z@ \@plus3fill + \if@twoside \next@tpage \fi + \fi + \end{titlepage} + \setcounter{footnote}{0}% + \global\let\thanks\relax + \global\let\maketitle\relax + \global\let\@thanks\@empty + \global\let\@author\@empty + \global\let\@date\@empty + \global\let\@title\@empty + \global\let\@extratitle\@empty + \global\let\@titlehead\@empty + \global\let\@subject\@empty + \global\let\@publishers\@empty + \global\let\@uppertitleback\@empty + \global\let\@lowertitleback\@empty + \global\let\@dedication\@empty + \global\let\author\relax + \global\let\title\relax + \global\let\extratitle\relax + \global\let\titlehead\relax + \global\let\subject\relax + \global\let\publishers\relax + \global\let\uppertitleback\relax + \global\let\lowertitleback\relax + \global\let\dedication\relax + \global\let\date\relax + \global\let\and\relax} +\else + \newcommand*\maketitle[1][1]{\par + \begingroup + \renewcommand\thefootnote{\@fnsymbol\c@footnote}% + \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}% + \long\def\@makefntext##1{\parindent 1em\noindent + \hb@xt@1.8em{% + \hss\@textsuperscript{\normalfont\@thefnmark}}##1}% + \if@twocolumn + \ifnum \col@number=\@ne + \@maketitle + \else + \twocolumn[\@maketitle]% + \fi + \else + \global\@topnum\z@ + \@maketitle + \fi + \thispagestyle{plain}\@thanks + \endgroup + \setcounter{footnote}{0}% + \let\thanks\relax + \let\maketitle\relax + \let\@maketitle\relax + \global\let\@thanks\@empty + \global\let\@author\@empty + \global\let\@date\@empty + \global\let\@title\@empty + \global\let\@extratitle\@empty + \global\let\@titlehead\@empty + \global\let\@subject\@empty + \global\let\@publishers\@empty + \global\let\@uppertitleback\@empty + \global\let\@lowertitleback\@empty + \global\let\@dedication\@empty + \global\let\author\relax + \global\let\title\relax + \global\let\extratitle\relax + \global\let\titlehead\relax + \global\let\subject\relax + \global\let\publishers\relax + \global\let\uppertitleback\relax + \global\let\lowertitleback\relax + \global\let\dedication\relax + \global\let\date\relax + \global\let\and\relax} +\fi +\def\@maketitle{% + \let\footnote\thanks + \ifx\@extratitle\@empty \else + \noindent\@extratitle \next@tpage \if@twoside \null\next@tpage \fi + \fi + \ifx\@titlehead\@empty \else + \noindent\begin{minipage}[t]{\textwidth} + \@titlehead + \end{minipage}\par + \fi + \null + \vskip 2em% + \begin{center}% + \ifx\@subject\@empty \else + {\Large \@subject \par} + \vskip 1.5em + \fi + {\huge \@title \par}% + \vskip 1.5em% + {\Large + \lineskip .5em% + \begin{tabular}[t]{c}% + \@author + \end{tabular}\par}% + \vskip 1em% + {\Large \@date \par}% + \vskip \z@ \@plus 1em + {\Large \@publishers \par} + \ifx\@dedication\@empty \else + \vskip 2em + {\Large \@dedication \par} + \fi + \end{center}% + \par + \vskip 2em}% +\renewenvironment{titlepage}{% + \if@twocolumn + \@restonecoltrue\onecolumn + \else + \@restonecolfalse + \fi + \thispagestyle{empty}% + \if@compatibility + \setcounter{page}{0} + \fi}% + {\if@restonecol\twocolumn \else \newpage \fi}% +}% +} +% \end{macrocode} +% \par This brings us to the end of \textsf{vrsion}. Hope you'll +% enjoy it! +% \iffalse +% +% \fi +% +% \Finale +% +\endinput diff --git a/Master/texmf-dist/source/latex/vrsion/vrsion.ins b/Master/texmf-dist/source/latex/vrsion/vrsion.ins new file mode 100644 index 00000000000..73c07485020 --- /dev/null +++ b/Master/texmf-dist/source/latex/vrsion/vrsion.ins @@ -0,0 +1,50 @@ +% +% This is file `vrsion.ins', the installation file for the +% `vrsion' package. Last revised 1997/02/22. +% +% Copyright (c) 1994-1997 by Mats Dahlgren . +% All rights reserved. +% +% You may use the 'vrsion' package freely, but at your own +% risk. The author of vrsion.dtx and vrsion.ins (the +% complete 'vrsion' package distribution) can not be held +% responsible for any consequence of your using any of these +% files, or files created from these, including hardware, +% software, and data damage. You may not make any changes to +% the files vrsion.dtx or vrsion.ins. You may incorporate +% the code from these files in other files under different +% names, provided the original author is given full credit for +% his work and that you yourself take the complaints from the +% user(s) of your file(s). You may freely distribute the +% files vrsion.dtx and vrsion.ins, provided: 1. You do not +% take money for the distribution or use of these files except +% for a nominal charge for diskettes and postage; and 2. You +% always distribute 'vrsion.dtx' and 'vrsion.ins' together +% at the same time. +% +\def\batchfile{vrsion.ins} +\input docstrip.tex + +\keepsilent +\preamble + +Copyright (c) 1994-1997 by Mats Dahlgren . +All rights reserved. See the file `vrsion.ins' for information +on how you may (re-)distribute the `vrsion' package files. + +\endpreamble +\generate{\file{vrsion.sty}{\from{vrsion.dtx}{paketkod}}% +} + +\Msg{************************************************************} +\Msg{ } +\Msg{ To finish the installation you have to move the file} +\Msg{ `vrsion.sty' into a directory searched by TeX.} +\Msg{ } +\Msg{ To produce the documentation run the file `vrsion.dtx'} +\Msg{ through LaTeX.} +\Msg{ } +\Msg{***********************************************************} +%% +%% end of file vrsion.ins +%% -- cgit v1.2.3