From 7bf8c88cd07f473b84d7f83b490350d433fed142 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Sun, 21 Mar 2010 23:23:02 +0000 Subject: vruler doc update (21mar10) git-svn-id: svn://tug.org/texlive/trunk@17523 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/tex/latex/vruler/vruler.sty | 396 ++++++++++++++++++++++++++ 1 file changed, 396 insertions(+) create mode 100644 Master/texmf-dist/tex/latex/vruler/vruler.sty (limited to 'Master/texmf-dist/tex/latex/vruler') diff --git a/Master/texmf-dist/tex/latex/vruler/vruler.sty b/Master/texmf-dist/tex/latex/vruler/vruler.sty new file mode 100644 index 00000000000..ec38f478f12 --- /dev/null +++ b/Master/texmf-dist/tex/latex/vruler/vruler.sty @@ -0,0 +1,396 @@ +% VERTICAL RULERS 2.3 Oct 1996 for Latex 2.09 or 2e, plain TeX, amsTeX +% by Zhuhan JIANG, University of New England, Australia NSW 2351. +% Email: zhuhan@neumann.une.edu.au +% +% PURPOSE: Make a vertical ruler, numbering consecutively so that +% any part of an article can be pinpointed immediately. +% Move vruler freely up and down, left and right. +% +% There are no packages to my knowledge that number lines +% one by one without missing certain lines, particularly +% when there are many maths equations in the text. So vruler +% is a good alternative for people writing text of versatile +% format or lots of maths formulas. +% COMMANDS: +% \setvruler[][][][][]% +% [][][][] +% +% \unsetvruler % optional +% +% +% distance between two consecutive vruler markings +% first marking reading +% is the line count increment +% number of digits required for ruler markings +% =0 if each page has same vruler marking, =1 if otherwise +% horizontal shift for odd pages +% from the default value for the vruler +% horizontal shift for even pages +% from the default value for the vruler +% vertical shift from default value for vruler +% height of vertical ruler +% +% \vrulercount - next mark reading on the vertical ruler +% +% \setdefault{cmdname}{n}{default_1}{..}{default_n} (re)set macro +% \cmdname[#1][..][#n] to take default_1 to default_n respectively, +% so that \cmdname[][xy] is same as \cmdname[default_1][xy][default..]. +% You don't need to use \setdefault unless you would like to change +% the default setting for macros in vruler.sty or elsewhere. +% +% DEFAULTS: +% The parameters of \setvruler admit defaults. +% Hence e.g. \setvruler alone is same as +% \setvruler[10pt][1][1][4][1][0pt][0pt][0pt][\textheight] +% and e.g. \setvruler[][20] is same as \setvruler[10pt][20] +% +% NOTES: +% 1. If you are using multicol.sty, then you might want to move +% the vruler into the center to separate the columns. +% +% 2. If you use \topskip other than the default value, then +% you will have to alter and parameters +% in \setvruler accordingly (which is simple). +% +% 3. It is best to choose baselineskip as so that line +% synchronisation is often optimal. Use e.g. 5+ to denote +% the line immediately after marking number 5 if necessary. +% +% 4. In twosided book style in LaTeX2e, the initial numbering +% of title page via \begin{titlepage} is actually onepage +% away. To overcome this, either do not include title page in +% the vruler environment, or set initial number #2 +% to a number (a page ahead) so that the resulting +% initial number is what one needs. +% +% 5. Version 1.0 of VRULER.STY for LaTeX is released in +% July 1993. +% +% EXAMPLE: see end of this file. +% You may run the example by simply removing the line +% containing \endinput +% +%BEGINMACROS +% +\ifx\VrulerDefined\undefined\let\next\relax\else +\message{NOT reloaded}\let\next\endinput\fi\next +\xdef\VrulerDefined{}% avoid TeX output routine manipulated twice. +% +\message{2.3 <24/10/96>}% +% +{\catcode`\@=11\relax \def\temp@macro{\space\space\space\space}% +\wlog{\temp@macro VRULER version 2.3 Octorber 1996 By Z Jiang}% +\wlog{\temp@macro University of New England, Australia}% +\wlog{\temp@macro Email: zhuhan@neumann.une.edu.au}}% +\xdef\EntryVruler{\the\catcode`\@}\catcode`\@=11\relax % SAVE @'s STATUS +\let\temp@@@macro=\wlog\def\wlog#1{}% +% +\newdimen\temp@dim \newdimen\b@xheight\newdimen\lineh@ight +\newbox\outputb@x\newbox\bufferbox\newbox\tempb@x +\newcount\refn@\newcount\tot@l\newcount\rulercount +\let\@outputpage@backup\@outputpage \let\plainoutput@backup\plainoutput +% +% NUMBER with left flushed zeros \fillzeros[] +\newcount\temp@@ \newcount\temp@ +\def\fillzeros[#1]#2{\temp@@=#2\relax\ifnum\temp@@<0\temp@@=-\temp@@\fi +\temp@=1 % +\loop\ifnum\temp@@<10 \else \divide\temp@@ by 10 \advance\temp@ by 1 \fi + \ifnum\temp@@=10\relax\temp@@=11\relax\fi \ifnum\temp@@>10 \repeat +\ifnum#2<0\advance\temp@1\relax-\fi +\loop\ifnum\temp@<#1\relax0\advance\temp@1\relax\fi \ifnum\temp@<#1 \repeat +\temp@@=#2\relax\ifnum\temp@@<0\temp@@=-\temp@@\fi \relax\the\temp@@}% +% +% PLAIN TEX adjustment +\ifx\textheight\undefined + \newdimen \textheight \newdimen \textwidth \textheight=\vsize \textwidth=\hsize + \font\tiny=cmr5 \let\c@page\pageno \def\oddsidemargin{0pt}% + \let\evensidemargin\oddsidemargin \def\headsep{2\topskip}% +\fi +% +% \makevruler[][][][][] +\def\makevruler[#1][#2][#3][#4][#5]{\begingroup\offinterlineskip +\textheight=#5\vbadness=10000\vfuzz=120ex\overfullrule=0pt% +\global\setbox\bufferbox=\vbox to \textheight{% +{\parskip=0pt\hfuzz=150em\b@xheight=\textheight +\lineh@ight=#1\global\rulercount=#2% +\tot@l\b@xheight\divide\tot@l\lineh@ight\advance\tot@l2% +\refn@1\vskip-\lineh@ight\vskip1ex% +\loop\setbox\tempb@x=\hbox to0cm{{\tiny\hfil\fillzeros[#4]\rulercount}}% +\ht\tempb@x\lineh@ight\dp\tempb@x0pt\box\tempb@x\break +\advance\refn@1\global\advance\rulercount#3\relax +\ifnum\refn@<\tot@l\repeat}}\endgroup}% +% +% MAKE VRULER into \box\outputb@x +\def\SET[#1][#2][#3][#4][#5][#6][#7][#8][#9]{% +\ifRuler@Started\else\global\rulercount=#2\fi \global\Ruler@Startedtrue +\begingroup\hbadness=10000\hfuzz=150em +\ifnum#5=0\makevruler[#1][#2][#3][#4][#9]\else +\makevruler[#1][\rulercount][#3][#4][#9]\fi\endgroup +\begingroup\vfuzz=120ex\vbadness=10000% +\global\setbox\outputb@x=\vbox{\b@xheight=\ht\bufferbox +\hbox{\hskip-50pt % default initial adjustment + \advance\b@xheight#8\lower\b@xheight% + \hbox{\ifodd\c@page\hskip#6\else\hskip#7\fi \copy\bufferbox}\nobreak + \hskip50pt \nobreak \ifodd\c@page \hskip-#6 \else\hskip-#7 \fi \nobreak + \lower\ht\tempb@x\hbox{\box\tempb@x}}}\endgroup }% +% +\newtoks\toksone\newtoks\tokstwo\newtoks\toksthree +\newtoks\toksfour\newtoks\toksfive \newif\ifRuler@Started \Ruler@Startedfalse +\def\set@vruler[#1][#2][#3][#4][#5][#6][#7][#8][#9]{% +\ifx\pageno\undefined % this is considered as LaTeX + % we assume all LaTeX versions have \@outputpage in the form of + % \@outputpage= ...\vbox{ ... \vbox{...}...}... , where 2nd \vbox + % contains the true content. + \toksfive=\expandafter{\@outputpage\s@ftymark}%temp toks + \long\def\parse@macro ##1\vbox##2##3\s@ftymark{% + \def\part@@one{##1}\def\part@@two{##2}\def\part@@three{##3}}% + \expandafter\parse@macro\the\toksfive + \let\part@one\part@@one \let\part@five\part@@three + \toksfive=\expandafter{\part@@two\s@ftymark}% + \expandafter\parse@macro\the\toksfive + \let\part@two\part@@one \let\part@three\part@@two \let\part@four\part@@three + \toksone=\expandafter{\part@one}\tokstwo=\expandafter{\part@two}% + \toksthree=\expandafter{\part@three}\toksfour=\expandafter{\part@four}% + \toksfive=\expandafter{\part@five}% +% +\edef\@outputpage{\the\toksone \noexpand\vbox{\the\tokstwo \noexpand\vbox{% + \noexpand\SET[\noexpand#1][\noexpand#2][\noexpand#3][\noexpand#4][\noexpand#5][\noexpand#6][\noexpand#7][\noexpand#8][\noexpand#9]% + \noexpand\temp@dim=\noexpand\textheight + \noexpand\advance\noexpand\temp@dim by \noexpand\headsep + \noexpand\hbox{% box things together + \noexpand\rlap{\noexpand\raise\temp@dim\box\outputb@x}% + \noexpand\setbox\noexpand\tempb@x=\noexpand\vbox{\the\toksthree}% + \noexpand\box\noexpand\tempb@x}\the\toksfour}}\the\toksfive}% +% +\else % now for plain TeX +\def\plainoutput{\textheight=\vsize \SET[#1][#2][#3][#4][#5][#6][#7][#8][#9]% + \setbox\tempb@x\vbox{\makeheadline\pagebody\makefootline}%from plain.tex + \shipout \vbox {\hbox{\hskip 15pt + \rlap{\temp@dim=\textheight\advance\temp@dim by \headsep + \raise\temp@dim\box\outputb@x }\hskip-15pt \box\tempb@x }}% + \advancepageno \ifnum\outputpenalty>-\@MM \else\dosupereject\fi }% +\fi}% +% +\def\unsetvruler{\Ruler@Startedfalse \let\@outputpage\@outputpage@backup + \let\plainoutput\plainoutput@backup}% +% +\ifx\new@measures\undefined\let\setvruler\set@vruler\fi +% +% LEAVE MACROS +\let\wlog\temp@@@macro\let\temp@@@macro\undefined@ +\catcode`\@=\EntryVruler\relax +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% if you delete everything below, the macros are still valid, +% except that you have to specify all the macro parameters for +% \setvruler explicitly and completely +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% +\xdef\EntryVruler{\the\catcode`\@}\catcode`\@=11\relax +% +% NEW MEASURES etc (parameter defaulting mechanism given by macros below) +\def\new@measures{% + \def\temp@@macro##1##2##3{\expandafter\ifx\csname ##3temp##2##1\endcsname + \relax\edef\next{\noexpand\csname new##1\noexpand\endcsname + \csname ##3temp##2##1\endcsname}% + \else\let\next\relax\fi\next}% + \def\temp@macro##1{% + \temp@@macro{##1}{@}{}\temp@@macro{##1}{@@}{}\temp@@macro{##1}{@@@}{}}% + \temp@macro{count}\temp@macro{toks}\temp@macro{box}\temp@macro{read}% + \temp@@macro{if}{@}{if}\temp@@macro{if}{@@}{if}\temp@@macro{if}{@@@}{if}% + \def\temp@@macro##1{\expandafter\ifx\csname temp##1dim\endcsname + \relax\edef\next{\noexpand\csname newdimen\noexpand\endcsname + \csname temp##1dim\endcsname}% + \else\let\next\relax\fi\next}% + \temp@@macro{@}\temp@@macro{@@}\temp@@macro{@@@}% +}% +\let\temp@@@macro=\wlog\def\wlog#1{}\new@measures +% +%%% GENERAL STACK +\def\make@STKcount{\csname newcount\endcsname + \STKcount\global\STKcount=0\relax}% +\ifx\STKcount\undefined@ + \def\next{\make@STKcount}\else\def\next{}\fi +\next % ensures stack pointer not flushed if this piece of code + % is loaded again +% +\long\def\push#1{\global\advance\STKcount1\relax +\expandafter\gdef\csname STK\the\STKcount\string~\endcsname{#1}}% +% +\def\popnil{\expandafter\let\expandafter\temp@macro + \csname STK\the\STKcount\string~\endcsname + \ifnum\STKcount>0\global\expandafter\let + \csname STK\the\STKcount\string~\endcsname=\undefined@ + \global\advance\STKcount-1% + \else + \def\temp@macro{}\global\STKcount=0% + \fi\relax % \temp@macro for pop +}% +% +\def\pop{\popnil\temp@macro}% +% +%% GET PARAMETERS +\long\def\get@nepara[#1][#2]{{\def\next@{#2}% +\ifx\next@\empty\push{#1}\else\push{#2}\fi}\ag@in}% +% +\long\def\get@para\left@#1\right@{% +\def\check@{% + \ifx[\next@ \def\full@####1{\get@nepara[#1]####1}% + \else \def\full@{\get@nepara[#1][#1]}\fi + \full@}% +\futurelet\next@\check@}% +% +\long\def\do@nepara\left@#1\right@#2\p@r@end{% +\gdef\p@r@data{#2}\global\advance\p@r@count1\get@para\left@#1\right@}% +% +\def\ag@in{\ifx\p@r@data\empty \def\next@{\relax +\getp@r@s\run@CMD}\else +\def\next@{\expandafter\do@nepara\p@r@data\p@r@end}\fi +\next@}% +% +\def\run@CMD{\csname STK\the\STKcount\string~\endcsname}% +% +\def\num@to@word#1{\ifcase #1 \or + \def\temp@macro{one}\or \def\temp@macro{two}\or + \def\temp@macro{three}\or \def\temp@macro{four}\or + \def\temp@macro{five}\or \def\temp@macro{six}\or + \def\temp@macro{seven}\or \def\temp@macro{eight}\or + \def\temp@macro{nine}\else \def\temp@macro{}\fi +\temp@toks=\expandafter{\temp@macro}}% +% +\temp@@count=1 % make nine newtoks, if they don't already exist +\loop \num@to@word{\temp@@count}% + \expandafter\ifx\csname p@r@\the\temp@toks\endcsname\relax + \temp@@toks={newtoks}\expandafter\csname\expandafter\the + \expandafter\temp@@toks\expandafter\endcsname + \csname p@r@\the\temp@toks\endcsname\fi + \advance\temp@@count by 1 \ifnum\temp@@count<10 \repeat +% +\ifx\p@r@count\undefined \newcount\p@r@count\fi +\long\def\st@ckparas#1\p@r@end{% +\global\p@r@count=0\gdef\p@r@data{#1}\ag@in}% +% +% PARAMETER ASSIGNMENT % use \temp@count +\def\getp@r@s{\temp@count=\p@r@count +{\loop + \ifnum\temp@count>0 % + \expandafter\let\expandafter + \temp@macro\csname STK\the\STKcount\string~\endcsname + \ifcase\temp@count + \or \global\p@r@one=\expandafter{\temp@macro}% + \or \global\p@r@two=\expandafter{\temp@macro}% + \or \global\p@r@three=\expandafter{\temp@macro}% + \or \global\p@r@four=\expandafter{\temp@macro}% + \or \global\p@r@five=\expandafter{\temp@macro}% + \or \global\p@r@six=\expandafter{\temp@macro}% + \or \global\p@r@seven=\expandafter{\temp@macro}% + \or \global\p@r@eight=\expandafter{\temp@macro}% + \or \global\p@r@nine=\expandafter{\temp@macro}% + \else \errmessage{Parameter capacity exceeded.}% + % this should never happen: TeX's max para no. is 9 + \fi + \global\expandafter\let + \csname STK\the\STKcount\string~\endcsname=\undefined@% + \global\advance\STKcount-1% + \global\advance\temp@count-1\relax + \fi + \ifnum\temp@count>0 % +\repeat}}% +% +\def\clrp@r@s{%GLOBALLY clear +\global\p@r@one={}\global\p@r@two={}\global\p@r@three={}% +\global\p@r@four={}\global\p@r@five={}\global\p@r@six={}% +\global\p@r@seven={}\global\p@r@eight={}\global\p@r@nine={}}% +% +\def\read@paras#1{\temp@@@count=1 %use \temp@@@count and \temp@@count + \loop \num@to@word{\the\temp@@@count}\csname p@r@\the\temp@toks\endcsname={}% + \advance\temp@@@count by 1 \ifnum\temp@@@count<10 \repeat + \temp@@@count=1 \temp@@count=#1 % + \def\read@one@para##1{\num@to@word{\temp@@@count}% + \def\temp@macro{\left@ ##1\right@}% + \temp@@@toks=\expandafter{\temp@macro}% + \csname p@r@\the\temp@toks\endcsname\expandafter{\temp@macro}% + \advance\temp@@@count by 1 \read@continue}% + \def\read@continue{\num@to@word{\temp@@@count}% which uses \temp@macro + \ifnum\temp@@@count>\temp@@count \let\next@@\make@default + \edef\temp@@macro{\the\p@r@one\the\p@r@two\the\p@r@three\the\p@r@four + \the\p@r@five\the\p@r@six\the\p@r@seven\the\p@r@eight\the\p@r@nine}% + \else \let\next@@\read@one@para + \fi \next@@}\read@continue}% +% +\def\make@@default#1#2{\temp@count=#2\relax \temp@@count=1 %used \temp@@macro + \loop \num@to@word{\temp@@count}% + \ifnum\temp@@count>\temp@count \csname p@r@\the\temp@toks\endcsname={}% + \else \csname p@r@\the\temp@toks\endcsname + =\expandafter{\expandafter[\expandafter + \the\csname p@r@\the\temp@toks\endcsname]}\fi + \advance\temp@@count by 1 % + \ifnum\temp@@count<10 \repeat + \edef\temp@macro{\the\p@r@one\the\p@r@two\the\p@r@three\the\p@r@four + \the\p@r@five\the\p@r@six\the\p@r@seven\the\p@r@eight\the\p@r@nine}% + \temp@toks=\expandafter{\temp@macro}% + \temp@@toks=\expandafter{\temp@@macro}% + \expandafter\let\expandafter\temp@macro\csname #1\endcsname + \expandafter\ifx\csname #1@ raw\endcsname\relax + \expandafter\let\csname #1@ raw\endcsname\temp@macro\fi + \expandafter\edef\csname#1\endcsname{% + \noexpand\push{\noexpand\edef\noexpand\next@@{% + \noexpand\noexpand \noexpand \csname \noexpand#1@ raw\noexpand\endcsname + \the\temp@toks}% + \noexpand\popnil\noexpand\clrp@r@s\noexpand\next@@}\noexpand\st@ckparas + \the\temp@@toks \noexpand\p@r@end}}% +% +% \setdefalut{cmdname}{n}{default1}{..}{default_n} +% then \cmdname[#1][..][#n] can be defaulted. +\def\setdefault#1#2{\def\make@default{\make@@default{#1}{#2}}\read@paras{#2}} +% +% best strategy (e.g) to define \foo[#1][#2]{#3} so as to default #1 and #2 +% while making #3 compulsory in brace bracket. +% 1. define \foo@[#1][#2]#3 as normal (what you wish) +% 2. define \foo[#1][#2]#{\foo@[#1][#2]} to make {#3} mandatory +% 3. use \setdefault{foo}{2}{one}{two} to default #1=one and #2 to two +% +% DEFAULT MECHANISM END: this piece of code can be included in any +% package and can be reloaded any times without overruning the resources. +% +%%%%%%% make defaults %%%%%%%%%%% +\setdefault{setvruler}{9}{12pt}{1}{1}{4}{1}{0pt}{0pt}{0pt}{\textheight}% +% +\let\wlog\temp@@@macro\let\temp@@@macro\undefined@ +\catcode`\@=\EntryVruler\relax +\endinput +% +%ENDMACROS +% +% Application example +\documentstyle[vruler,twoside]{article} + \setlength{\textwidth}{2.5in} + \setlength{\oddsidemargin}{3cm} + \setlength{\evensidemargin}{6cm} + \overfullrule=0pt \parindent=0pt +\begin{document} +\advance\textwidth 3cm %2cm is better for plain TeX +\setvruler [][][][][][\textwidth] + This is a simple example, in which we have + placed vertical rulers on the left for + odd numbered pages and on the right for + even numbered pages. \newpage + + This is the second page and is thus an even + numbered page. Please see that the vertical + ruler is now on the right, and is approximately + of the same distance from the text margin as + the vertical ruler on the first page from + the left margin there. \newpage +\unsetvruler + The following pages, in fact only this page, will + not be appended with the vertical rulers.\newpage +\setvruler[][\rulercount] + This page will be added with the vertical ruler again. + Here the numbering marking of the vertical ruler picks + up where it was left. Nevertheless, we may start with + any new number. \newpage + + This is another page. Please see that both this and + the previous pages have vruler on the left side. +\end{document} -- cgit v1.2.3