From ba638983f65249bb548bd1441329c5d6c0fccbde Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Sat, 6 Aug 2016 22:37:51 +0000 Subject: tocdata (6aug16) git-svn-id: svn://tug.org/texlive/trunk@41810 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/source/latex/tocdata/tocdata.dtx | 980 +++++++++++++++++++++ Master/texmf-dist/source/latex/tocdata/tocdata.ins | 46 + 2 files changed, 1026 insertions(+) create mode 100644 Master/texmf-dist/source/latex/tocdata/tocdata.dtx create mode 100644 Master/texmf-dist/source/latex/tocdata/tocdata.ins (limited to 'Master/texmf-dist/source') diff --git a/Master/texmf-dist/source/latex/tocdata/tocdata.dtx b/Master/texmf-dist/source/latex/tocdata/tocdata.dtx new file mode 100644 index 00000000000..1b6fc2a4a97 --- /dev/null +++ b/Master/texmf-dist/source/latex/tocdata/tocdata.dtx @@ -0,0 +1,980 @@ +% \iffalse meta-comment +% +% Copyright 2016 Brian Dunn +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3 +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of LaTeX +% version 2005/12/01 or later. +% +% \fi +% +% \iffalse +%\NeedsTeXFormat{LaTeX2e}[1999/12/01] +%\ProvidesPackage{tocdata} +% [2016/07/11 v0.11 Adds author/artist to TOC entries.] +% +%<*driver> +\documentclass{ltxdoc} + + +\newcommand{\mypackagename}{tocdata} + +\newcommand{\quicksummary}{% +Optionally prints author, artist, or other data on a line +of the \acro{TOC}/\acro{LOF}. +} + + +\usepackage{lmodern} +% \usepackage{libertine} +\usepackage[T1]{fontenc} +\usepackage[utf8]{inputenc} +\usepackage{textcomp} % provides \degree, \textquotesingle, \textmu + +\usepackage{newunicodechar} +\newunicodechar{ff}{ff} +\newunicodechar{fi}{fi} +\newunicodechar{fl}{fl} +\newunicodechar{ffi}{ffi} +\newunicodechar{ffl}{ffl} +% \newunicodechar{°}{\degree} +\newunicodechar{ρ}{\ensuremath{\rho}} +\newunicodechar{⨯}{\texttimes} +\newunicodechar{⁄}{\textfractionsolidus} +% \newunicodechar{®}{\textregistered} +% \newunicodechar{©}{\textcopyright} +\newunicodechar{—}{---} +\newunicodechar{–}{--} +% \newunicodechar{”}{''} +% \newunicodechar{“}{``} +% \newunicodechar{§}{\S} +% \newunicodechar{¶}{\P} +% \newunicodechar{†}{\dag} +\newunicodechar{‡}{\ddag} + +\usepackage{microtype} + +\usepackage[log-declarations=false]{xparse} + +\usepackage[svgnames]{xcolor} +\definecolor{myurlcolor}{rgb}{0,0,.7} +\definecolor{mylinkcolor}{rgb}{.7,0,0} +\definecolor{codecolor}{rgb}{0,.4,.2} +\definecolor{overviewcolor}{rgb}{0,.2,.4} + + +\usepackage{graphicx} +\graphicspath{{images/}} + +\usepackage{multicol} + +\usepackage{enumitem} + +\usepackage{array} +\usepackage{longtable} +\usepackage{booktabs} + +\usepackage[normalem]{ulem} + +% \usepackage{verbatim} +\usepackage{fancyvrb} + +\usepackage{comment} +\excludecomment{testing} + +% \usepackage{morefloats} +% \usepackage{marginfix} + + + + +\usepackage{titletoc} +% \usepackage{tocloft} + + +\usepackage{titleps} + +\newpagestyle{pageheadfoot}{ + \headrule + \sethead{\pkg{\mypackagename}}{}{\thepage} +% \renewcommand{\makefootrule}{\rule[2.5ex]{\linewidth}{.4pt}} + \setfoot{}{}{} +} + +\pagestyle{pageheadfoot} + + + + +\usepackage[pdftex,bookmarks=true,hidelinks,% +colorlinks,linkcolor=mylinkcolor,urlcolor=myurlcolor,% +pageanchor=true,hyperindex=false, +]{hyperref} + +\hypersetup{% +pdfinfo={% +Title={LaTeX \mypackagename{} package},% +Author={Brian Dunn},% +Subject={LaTeX tocdata package},% +Keywords={LaTeX, tocdata, contents}% +}} + + +\usepackage{cleveref} + +\newcommand{\lmacro}[1]{\textbackslash#1} +\newcommand{\cmds}[1]{\texttt{#1}} +\newcommand{\env}[1]{\texttt{#1}} +\newcommand{\pkg}[1]{\textsf{\textbf{#1}}} +\newcommand{\acro}[1]{\textsc{\lowercase{#1}}} +\newcommand{\DescType}[1]{\raggedleft{\scriptsize#1}\quad} +\newcommand{\DescribeCommand}[1]{\leavevmode\marginpar{\DescType{Cmd}\bfseries\texttt{#1}}\index{#1 (command)}\ignorespaces} +\newcommand{\DescribeFile}[1]{\leavevmode\marginpar{\DescType{File}\bfseries\texttt{#1}}\index{#1 (file)}\index{files:>#1}\ignorespaces} +\newcommand{\DescribePackage}[1]{\leavevmode\marginpar{\DescType{Pkg}\bfseries\textsf{#1}}\index{#1 (package)}\index{packages:>#1}\ignorespaces} +\newcommand{\DescribeBoolean}[1]{\leavevmode\marginpar{\DescType{Bool}\texttt{#1}}\index{#1 (boolean)}\index{booleans:>#1}\ignorespaces} +\newcommand{\DescribeLength}[1]{\leavevmode\marginpar{\DescType{Len}\cmd{#1}}\index{\cmd{#1} (length)}\index{lengths:>\cmd{#1}}\ignorespaces} +\newcommand{\DescribeCounter}[1]{\leavevmode\marginpar{\DescType{Ctr}\texttt{#1}}\index{#1 (counter)}\index{counters:>#1}\ignorespaces} +\newcommand{\DescribeSimple}[1]{\leavevmode\marginpar{\raggedleft\texttt{#1}}\index{#1}\ignorespaces} +\renewcommand{\PrintEnvName}[1]{\strut \MacroFont {\scriptsize{}Env\quad}#1\ } + + +\newcommand{\tikz}{Ti\textit{k}z} +\newcommand{\htmlfive}{\acro{HTML}\oldstylenums{5}} +\newcommand{\cssthree}{\acro{CSS}\oldstylenums{3}} + +\newcommand{\goesto}{$\Rightarrow$} + +\newenvironment{docsidebar}[1][] +{\par\addvspace{1.5ex}% +\hfill\minipage{.9\linewidth} +\raggedright#1 +%\smallskip\hrule\medskip +} +{ +% \smallskip\hrule +\endminipage\hspace*{\fill}\par\addvspace{1.5ex}} + +\makeatletter +\newcommand{\watchout}[1][]{% +\@bsphack% +\marginpar{\hspace*{\fill}\includegraphics[height=3ex]{symbol_warning.pdf} +\textcolor{DarkRed}{#1}}% +\@esphack% +} +\makeatother + + + + +\setlength{\marginparsep}{1em} +\setlength{\marginparpush}{.7ex} +\setlength{\parindent}{0em} +\setlength{\parskip}{2ex} +\setlength{\IndexMin}{40ex} + +\usepackage{\mypackagename} + +\setcounter{IndexColumns}{2} +\setcounter{GlossaryColumns}{1} + +\DisableCrossrefs +\CodelineIndex +\RecordChanges +\begin{document} + \DocInput{\mypackagename.dtx} +\end{document} +% +% \fi +% +% \CheckSum{0} +% +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} + +% \changes{v0.10}{2016/05/05}{\ 2016/05/05 Initial version.} +% \changes{v0.11}{2016/07/11}{\ 2016/07/11 Minor docs improvements in spelling, grammar, formatting.} + + + +% \GetFileInfo{\mypackagename.sty} +% +% \DoNotIndex{\newcommand,\renewcommand,\addtocounter,\begin,\end,\begingroup,\endgroup} +% \DoNotIndex{\global,\ifbool,\ifthenelse,\isequivalentto,\let} +% \DoNotIndex{\booltrue,\boolfalse} +% \expandafter\DoNotIndex\expandafter{\detokenize{\(,\),\,,\\,\#,\$,\%,\^,\_,\~,\ ,\&,\{,\}}} +% +% \renewcommand{\listfigurename}{List of Illustrations} +% \begin{titlepage} +% \centering +% \vfill +% ^^A \includegraphics[width=.3\linewidth]{\mypackagename_logo.pdf} +% \vfill +% {\Huge The \textbf{\mypackagename} package} +% +% \fileversion{} --- \filedate +% +% \bigskip +% +% {\small\copyright{} 2016} Brian Dunn\\ \small \texttt{bd@BDTechConcepts.com} +% +% \vspace{.5in} +% +% {\normalsize\textup{\quicksummary}} +% +% +% \vfill +% +% +% ^^A % \title{The \pkg{lwarp} package\thanks{This document +% ^^A % corresponds to \pkg{lwarp}~\fileversion, +% ^^A % dated \filedate.}} +% ^^A % \author{{\small\copyright{} 2016} Brian Dunn\\ \small \texttt{bd@BDTechConcepts.com}} +% ^^A % \published{} +% ^^A % \subtitle{\textup{\LaTeX{} to HTML5}} +% ^^A % +% ^^A % \maketitle +% +% \vfill +% +% \begin{abstract} +% Describes a method for adding information such as an author or artist to +% each line of a table of contents or list of figures entry, +% after the title and just before page number. +% This is commonly done in the table of contents of an anthology, for example. +% +% Support is provided for the \pkg{titletoc} and \pkg{tocloft} packages. +% \end{abstract} +% +% \vspace*{\fill} +% \vspace*{\fill} +% \vspace*{\fill} +% \end{titlepage} +% +% \tableofcontents +% \clearpage +% \listoffigures +% ^^A \listoftables +% +% +% \thispagestyle{pageheadfoot} +% +% \clearpage +% +% \sectionauthor{Introduction}{Brian}{Dunn} +% +% \begin{figure} +% \setlength{\fboxsep}{0pt} +% \centering +% \fbox{\includegraphics[width=2in]{go_problem.png}} +% \captionartist{The Opening Challenge} +% [Problem 1-2, from \textit{Gokyo Shumyo}] +% {Hayashi}{Genbi} +% \end{figure} + +% +% Anthologies may be printed with the author alongside each title in the +% table of contents. +% +% Many commonly-recommended methods for doing this with \LaTeX, such as those linked to in +% section \ref{sec:othermethods}, place the author above or below the title and +% page number, but seldom on the same line. +% +% The \pkg{tocdata} package provides some basic infrastructure to help +% add some information to a line in the table of contents, after the title +% and just before the page number. This function requires the use of either +% the \pkg{titletoc} or \pkg{tocloft} packages. +% +% Additionally, +% user-level macros are provided which add the author's name to a chapter or section, +% and add the artist's name and optional additional text to a figure. +% Author and artist names are also added to the index. +% +% As examples of the use of these high-level macros, +% the major section headings of this documentation +% have the author's name applied, and additional illustrations are supplied as well. +% The results are demonstrated in the table of contents, list of figures, and the index. +% +% +% \clearpage +% +% \sectionauthor[Other Methods]{Other Methods}{Various}{Authors} +% \label{sec:othermethods} +% +% For other methods which place the author on a separate line from the title, see the +% following. +% +% Note that these methods will be preferable if a larger amount of information +% is to be placed for each title, such that it usually would not all fit on one line +% \watchout[Too much text!] +% in the table of contents. +% +% \href +% {http://tex.stackexchange.com/questions/47554/add-authors-name-automatically-while-building-toc} +% {http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 47554/add-authors-name-automatically-while-building-toc} +% +% \href +% {http://tex.stackexchange.com/questions/110218/add-author-before-chapter-title-in-toc} +% {http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 110218/add-author-before-chapter-title-in-toc} +% +% \href +% {http://tex.stackexchange.com/questions/156862/displaying-author-for-each-chapter-in-book} +% {http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 156862/displaying-author-for-each-chapter-in-book}% +% +% +% \begin{figure} +% \setlength{\fboxsep}{0pt} +% \centering +% \fbox{\includegraphics[height=3in]{engineer.jpg}} +% \captionartist +% [The Crazy Engineer] +% {The Crazy Engineer}[Illustration from \textit{The Crazy Engineer} \\ \textit{McGuffey's Fifth Eclectic Reader}]{H. F.}{Farny} +% \end{figure} +% +% +% \clearpage +% +% \begin{figure} +% \centering +% \includegraphics[width=3in]{astronometer_herschel.jpg} +% \captionartist +% {Astronometer\label{fig:astronometer}} +% [Astronometer made to compare the light of certain stars by the intervention of the moon.] +% [Sir]{John}{Herschel}[, 1st Baronet KH FRS] +% \end{figure} +% +% \sectionauthor{How to use \pkg{tocdata}}{Brian}{Dunn} +% +% This section shows how to use the \pkg{tocdata} package. +% +% There are several layers of macros: +% \begin{itemize} +% \item The lowest level provides the basic infrastructure for inserting information +% into the table of contents, along with hooks for the \pkg{titletoc} and \pkg{tocloft} packages. +% \item The intermediate-level macro is \cs{tocdata}, which may be used to manually +% add a piece of data to a \cs{chapter}, \cs{section}, or \cs{caption}. +% \cs{tocdatafont} is also provided to control the appearance of this data in the \acro{TOC}/\acro{LOF}. +% \item At the highest level is a sample implementation of user-level macros which provides +% an easy way to create chapters, sections, and figures with associated authors and artists, +% along with supplemental information for figures and automatic index entries for both. +% \end{itemize} +% +% +% \subsection{Basic Setup} +% +% +% +% \subsubsection{Preamble} +% +% \pkg{tocdata} requires the use of either the \pkg{tocloft} or \pkg{titletoc} package. +% +% In the preamble, use: +% +% +% \begin{docsidebar} +% |\usepackage{tocloft}| +% +% |\usepackage{tocdata}| +% \end{docsidebar} +% +% -\textit{or}- +% +% \begin{docsidebar} +% |\usepackage{titletoc}| +% +% |\usepackage{tocdata}| +% \end{docsidebar} +% +% +% +% \begin{docsidebar} +% If using \pkg{titletoc}: +% Note that the user should not use the \cs{dottedcontents} macro, as this +% is not patched for use with \pkg{tocdata}. Use \cs{titlecontents} instead, +% inserting the \cs{TD@usetocdata} macro as shown below. +% \end{docsidebar} +% \vspace{-6ex}\watchout[\cs{dottedcontents}]\vspace{6ex} +% +% \subsubsection{Font control in the TOC/LOF} +% +% To control the font used for the author on the table-of-contents line, +% the default is: +% +% \begin{docsidebar} +% |\newcommand{\tocdatafont}[1]{{\normalfont\textit{\small#1}}}| +% \end{docsidebar} +% +% You may change to other font options, such as: +% +% \begin{docsidebar} +% |\renewcommand{\tocdatafont}[1]{\normalfont\textsc{\footnotesize#1}}| +% \end{docsidebar} +% +% +% \subsection{Mid-level applications} +% +% Should the user only wish to add a bit of text into the \acro{TOC}/\acro{LOF}, +% the \cs{tocdata} macro may be used just before the sectioning or caption command, +% as shown next. +% +% \subsubsection{Adding TOC data per section} +% Before each \cs{chapter} or \cs{section} which is to have an author or other data: +% +% \begin{docsidebar} +% |\tocdata{toc}{Author's Name}| \\ +% |\chapter{Chapter Title}| \quad -\textit{or}- \quad |\section{Section Title}| +% \end{docsidebar} +% +% +% \subsubsection{Adding LOF data per figure} +% Before each \cs{caption} which is to have an artist: +% +% \begin{docsidebar} +% |\tocdata{lof}{Artist's Name}| \\ +% |\caption{Figure Title}| +% \end{docsidebar} +% +% You may wish to print the artist's name in the figure as well. +% +% +% \subsection{High-level user macros} +% +% Additional macros are given in section \ref{sec:usermacros}. +% These are user-level sectioning and captioning commands which add the +% names to the \acro{TOC} and \acro{LOF}, +% and also add the artist's name and optional additional text +% to a figure (as in Figure \ref{fig:quail}), +% and also add the names to the index. +% An optional prefix and suffix may be attached to the names (as in Figure \ref{fig:astronometer}), +% and these will be printed at the section heading or caption, but not +% in the \acro{TOC}/\acro{LOF} or in the index. +% +% These macros may be ignored or modified as needed. +% +% \subsubsection{Sectioning commands with authors} +% +% \DescribeMacro{\chapterauthor} +% To use these macros, do not use \cs{tocdata} as shown above, but instead use, +% in the place of \cs{chapter}: +% +% \begin{docsidebar} +% |\chapterauthor[TOC entry]{Title}[Prefix]{First}{Last}[Suffix]| +% \end{docsidebar} +% +% \DescribeMacro{\sectionauthor} +% or, in the place of \cs{section}: +% +% \begin{docsidebar} +% |\sectionauthor[TOC entry]{Title}[Prefix]{First}{Last}[Suffix]| +% \end{docsidebar} +% +% \subsubsection{Figure captions with artist names and add'l text} +% +% \DescribeMacro{\captionartist} +% For figures, in the place of \cs{caption}: +% +% \begin{docsidebar} +% |\captionartist[LOF entry]{Title}[Text][Prefix]{First}{Last}[Suffix]| +% \end{docsidebar} +% +% If you are using the optional prefix, the optional text must also be given, even if it +% is empty. For example, use: +% \watchout[Optional arguments] +% \begin{docsidebar} +% |\captionartist{Title}|\textcolor{red}{|[]|}|[Sir]{Isaac}{Newton}| +% +% \medskip +% +% \footnotesize (If only one optional argument is given before the first name, it will be +% interpreted as the optional text, not as the optional prefix.) +% \end{docsidebar} +% +% \DescribeMacro{\captionartist*} +% If you are using the \pkg{caption} package or another package which +% supports \cs{caption*}, you may use \cs{captionartist*} with \pkg{tocdata}. +% The artist and supplemental text will still be printed below the figure, +% and an unnumbered caption will be generated, even though a \acro{LOF} entry will not be made. +% +% Should you mistakenly use \cs{captionartist*} without the \pkg{caption} package, +% expect to get a caption with a visible star in it. +% \watchout[\pkg{caption} package] +% To fix the problem:\\ +% \hspace*{1em} |\usepackage{caption}| +% +% \subsubsection{Formatting in sections and figures} +% +% \DescribeMacro{\tocdatachapprint} +% \DescribeMacro{\tocdatasecprint} +% To change the formatting of the author names printed after +% each chapter or section, or to remove them entirely, use +% these macros, as described in section \ref{sec:usermacros} on page \pageref{sec:usermacros}: +% +% +% \DescribeMacro{\tocdatafigprint} +% \DescribeMacro{\tocdatafigtextprint} +% To change the formatting of a figure's artist's name and optional text, +% use these macros, also described in section \ref{sec:usermacros}. +% +% +% \StopEventually{\PrintChanges +% \PrintIndex +% +% \begin{figure}[hbp] +% \centering +% \setlength{\fboxsep}{2ex} +% {\fontsize{100}{120}\selectfont$\Omega$} +% \captionartist{Omega --- The End}{Greek}{Alphabet} +% \end{figure} +%} +% +% \begin{figure}[hbp] +% \setlength{\fboxsep}{0pt} +% \centering +% \fbox{\includegraphics[width=3in]{quail.jpg}} +% \captionartist{Quail\label{fig:quail}} +% [Illustration from \textit{About Quail} \\ \textit{McGuffey's Fifth Eclectic Reader}] +% {Alexander}{Pope} +% \end{figure} +% +% +% \clearpage +% +% \sectionauthor{Implementation}{Brian}{Dunn} +% +% \begin{figure} +% \centering +% \includegraphics[width=3in]{diagram_sunbeam.jpg} +% \captionartist +% {Diagram Of A Sunbeam}[] +% [Sir]{Isaac}{Newton} +% \end{figure} +% +% Below, the \pkg{tocdata} code section contains the low-level code used to +% place the data into the table of contents and list of figures, as well as +% the code to control the font used while doing so. +% +% Next are sections used to support \pkg{titletoc} and \pkg{tocloft}. +% +% Finally, the high-level macros are provided. The user may ignore or redefine these +% as desired. +% +% +% \subsection{Requirements} +% \begin{macrocode} +\RequirePackage{xparse} +\RequirePackage{etoolbox} +% \end{macrocode} + + +% \subsection{\pkg{tocdata} code} +% \begin{macro}{\TD@thistocdata} +% Storage for the data to be added to the end of the \acro{TOC} entry: +% \begin{macrocode} +\newcommand{\TD@thistocdata}{} +% \end{macrocode} +% \end{macro} + +% \begin{macro}{\settocdata} +% Written to the |.toc| or |.lof| file, assigns \cs{thistocdata}: +% \begin{macrocode} +\newcommand{\settocdata}[1]{\renewcommand{\TD@thistocdata}{#1}} +% \end{macrocode} +% \end{macro} + +% \begin{macro}{\tocdata} \marg{|toc| or |lof|} \marg{text} +% +% To be called by a higher-level macro to assign data to a |.toc| or |.lof| file: +% \begin{macrocode} +\newcommand{\tocdata}[2]{% +\@bsphack\addtocontents{#1}{\protect\settocdata{#2}}\@esphack% +} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\tocdatafont} \marg{text} +% +% Controls the font for the \acro{TOC} data. +% +% |\renewcommand{\tocdatafont}[1]{\textit{#1}}|, etc. +% +% \begin{macrocode} +\newcommand{\tocdatafont}[1]{{\normalfont\textit{\small#1}}} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\TD@usetocdata} +% +% To be inserted into low-level \acro{TOC}-generation code where the data should appear. +% +% See the example using \pkg{titletoc}, below. +% +% Prints the data, then clears the storage so it is not printed again. +% \begin{macrocode} +\newcommand{\TD@usetocdata}{% +\tocdatafont{\TD@thistocdata}% +\global\def\TD@thistocdata{}% +} +% \end{macrocode} +% \end{macro} + + +% \subsection{\pkg{titletoc} support} +% +% \begin{figure} +% \centering +% \setlength{\fboxsep}{2ex} +% +% {\fontsize{140}{160}\selectfont$\pi$} +% \captionartist{Pi --- A Work of Art\label{fig:workofart}}{Greek}{Alphabet} +% \end{figure} +% +% +% If \pkg{titletoc} is loaded, patch macros for its use: +% \begin{macrocode} +\@ifpackageloaded{titletoc}{ +% \end{macrocode} +% + +% \DescribeMacro{\titlecontents} +% A set of \pkg{titletoc} commands which set up the formatting of the +% \acro{TOC} entries. These are patched to include the tocdata just after +% the leader (|titlerule*|), and just before the page number. +% +% These macros also include spacing commands, and thus may need to be +% redefined by the user. +% +% Note that the user should not use the \cs{dottedcontents} macro, as this +% is not patched for use with \pkg{tocdata}. Use \cs{titlecontents} instead, +% \watchout[\cs{dottedcontents}] +% inserting the \cs{TD@usetocdata} macro as shown below. +% \begin{macrocode} +\@ifundefined{chapter} +{} +{ +\titlecontents{chapter}[0em]{}{\contentslabel{2.5em}}{}{% +% \dotfill +\titlerule*[.75pc]{.}% +% +% \end{macrocode} +% The new patch goes here: +% \begin{macrocode} +\TD@usetocdata% <-- newly added for the tocdata package +% +\contentspage}[\vspace{-.5ex}] +} +% \end{macrocode} +% Likewise for sections: +% \begin{macrocode} +\titlecontents{section}[2.5em]{}{\contentslabel{2.5em}}{}{% +% \dotfill +\titlerule*[.75pc]{.}% +\TD@usetocdata% +\contentspage}[\vspace{-.5ex}] +% \end{macrocode} +% Likewise for figures: +% \begin{macrocode} +\titlecontents{figure}[0em]{}{\contentslabel{3em}}{}{% +% \dotfill +\titlerule*[1pc]{.}% +\TD@usetocdata% +\contentspage}[\vspace{-.5ex}] +% \end{macrocode} + +% \begin{macrocode} +}% end of titletoc loaded +{% titletoc is not loaded +}% end of \@ifpackageloaded{titletoc} +% \end{macrocode} + + +% \subsection{\pkg{tocloft} support} +% +% If \pkg{tocloft} is loaded, the following patches are applied: +% \begin{macrocode} +\@ifpackageloaded{tocloft} +{ +% \end{macrocode} +% If the documentclass includes a chapter level: +% \begin{macrocode} +\if@cfthaschapter +% \end{macrocode} +% \DescribeMacro{\cftXleader} A set of commands used by \cs{tocloft} to +% typeset the leader between the title and the page number. +% These are patched to print the tocdata just after the leader. +% \begin{macrocode} +\renewcommand{\cftchapleader}{\bfseries\cftdotfill{\cftchapdotsep}\TD@usetocdata} +\renewcommand{\cftsecleader}{\normalfont\cftdotfill{\cftsecdotsep}\TD@usetocdata} +\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata} +\else +% \end{macrocode} +% If there is no chapter level: +% \begin{macrocode} +\renewcommand{\cftsecleader}{\bfseries\cftdotfill{\cftsecdotsep}\TD@usetocdata} +\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata} +\fi +}% end of tocloft patches +{}% tocloft not loaded +% \end{macrocode} + +% It is possible to patch the regular \LaTeX{} code here. +% Look at |book.cls| and |article.cls|, +% for the macros \cs{l@chapter} and \cs{l@section}, and look in the \LaTeX{} +% |source2e.pdf| for \cs{\@dottedtocline}. +% +% +% +% +% \clearpage +% +% \subsection{User-level macros} +% \label{sec:usermacros} +% +% \begin{figure} +% \centering +% \includegraphics[width=3in]{newton_astrolabe.jpg} +% \captionartist{Sir Isaac Newton's Astrolabe}[][Sir]{Isaac}{Newton} +% \end{figure} +% +% +% Example user-level macros follow. +% +% These macros are in addition to the standard sectioning and caption commands, +% adding first and last names for the table of contents and list of figures. +% For chapters and sections, the author's name with optional prefix and suffix +% are also added below the title. +% For figures, \cs{captionauthor} also prints the figure's artist's +% name with optional prefix and suffix just below the figure. +% +% The regular sectioning and caption commands may still be used for anything +% which does not have an author/artist name. +% +% +% \begin{macro}{\tocdatachapprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix} +% +% User-redefinable macro to print the author's name underneath the chapter title. +% +% \begin{macrocode} +\@ifundefined{chapter} +{}% if no chapters +{% only of chapters exists in this documentclass: +\newcommand{\tocdatachapprint}[4] +{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}} +}% end of chapters-only +% \end{macrocode} +% To remove the author's name, redefine this as a null function taking four arguments: +% \begin{docsidebar} +% |\renewcommand{\tocdatachapprint}[4]{}| +% \end{docsidebar} +% \end{macro} +% +% \begin{macro}{\tocdatasecprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix} +% +% User-redefinable macro to print the author's name underneath the section title. +% +% \begin{macrocode} +\newcommand{\tocdatasecprint}[4] +{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}} +% \end{macrocode} +% To remove the author's name, redefine this as a null function taking four arguments: +% \begin{docsidebar} +% |\renewcommand{\tocdatasecprint}[4]{}| +% \end{docsidebar} +% \end{macro} +% +% \begin{macro}{\chapterauthor} * \oarg{2:TOC entry} \marg{3:title} +% \oarg{4:prefix} \marg{5:first} \marg{6:last} \oarg{7:suffix} +% \begin{macrocode} +\@ifundefined{chapter} +{}% if no chapters +{% only of chapters exists in this documentclass: +\NewDocumentCommand{\chapterauthor}{s o m O{} m m O{}}{% +% \end{macrocode} +% The starred version does not create a \acro{TOC} entry, +% so it is used as-is: +% \begin{macrocode} +\IfBooleanTF{#1}% star: +{\chapter*{#3\tocdatachapprint{#4}{#5}{#6}{#7}}} +% \end{macrocode} +% The un-starred version appears in the \acro{TOC}, so add the author's name: +% \begin{macrocode} +{% no star: +\tocdata{toc}{#5 #6} +% \end{macrocode} +% Create the chapter depending on the optional name: +% \begin{macrocode} +\IfValueTF{#2} +{\chapter[#2]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}} +{\chapter[#3]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}} +} +% \end{macrocode} +% Create an index entry depending on whether there is a first name: +% \begin{macrocode} +\ifblank{#5} +{\index{#6}} +{\index{#6, #5}} +}% end of \chapterauthor +}% end of \@ifundefined{chapter} +% \end{macrocode} +% \end{macro} + + +% \begin{macro}{\sectionauthor} * \oarg{2:TOC entry} \marg{3:title} +% \oarg{4:prefix} \marg{5:first} \marg{6:last} \oarg{7:suffix} +% \begin{macrocode} +\NewDocumentCommand{\sectionauthor}{s o m O{} m m O{}}{% +% \end{macrocode} +% The starred version does not create a \acro{TOC} entry, +% so it is simply used as-is: +% \begin{macrocode} +\IfBooleanTF{#1}% star: +{\section*{#3\tocdatasecprint{#4}{#5}{#6}{#7}}} +% \end{macrocode} +% The un-starred version appears in the \acro{TOC}, so add the author's name: +% \begin{macrocode} +{% no star: +\tocdata{toc}{#5 #6} +% \end{macrocode} +% Create the section depending on the optional name: +% \begin{macrocode} +\IfValueTF{#2} +{\section[#2]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}} +{\section[#3]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}} +} +% \end{macrocode} +% Create an index entry depending on whether there is a first name: +% \begin{macrocode} +\ifblank{#5} +{\index{#6}} +{\index{#6, #5}} +} +% \end{macrocode} +% \end{macro} + + +% \begin{macro}{\tocdatafigprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix} +% +% User-redefinable macro to print the artist's name underneath the figure. +% +% +% \begin{macrocode} +\newcommand{\tocdatafigprint}[4]{% +\addvspace{1ex}% +{\centering\footnotesize\textsc{{#1 #2 #3#4}}\par}% +} +% \end{macrocode} +% To remove the artist's name, redefine this as a null function taking four arguments: +% \begin{docsidebar} +% |\renewcommand{\tocdatafigprint}[4]{}| +% \end{docsidebar} +% \end{macro} +% +% +% \begin{macro}{\tocdatafigtextprint} \marg{first} \marg{last} +% +% User-redefinable macro to print the artist's name underneath the figure. +% +% \begin{macrocode} +\newcommand{\tocdatafigtextprint}[1]{% +\addvspace{1ex}% +{\centering\footnotesize#1\par}% +} +% \end{macrocode} +% \end{macro} + +% \begin{macro}{\captionartist} * \oarg{2:LOF entry} \marg{3:title} +% \oarg{4:supplemental text} +% \oarg{5: prefix} \marg{6:first} \marg{7:last} \oarg{8:suffix} +% +% This macro adds optional supplemental text, which will be printed below the +% artist's name and above the caption, presuming that the caption is generated +% below the figure. +% +% If using the optional prefix, the optional text must also be given, even if it +% is empty. For example, use: +% \watchout[Optional arguments] +% \begin{docsidebar} +% |\captionartist{Title}|\textcolor{red}{|[]|}|[Sir]{Isaac}{Newton}| +% +% \medskip +% +% \footnotesize (If only one optional argument is given before the first name, it will be +% interpreted as the optional text, not as the optional prefix.) +% \end{docsidebar} +% \begin{macrocode} +\NewDocumentCommand{\captionartist}{s o m O{} O{} m m O{}}{% +% \end{macrocode} +% Print the artist's name next to the figure: +% \begin{macrocode} +\par\tocdatafigprint{#5}{#6}{#7}{#8} +% \end{macrocode} +% If supplemental text is provided, print it below the author: +% \begin{macrocode} +\ifblank{#4}{}{\par\tocdatafigtextprint{#4}} +% \end{macrocode} +% If starred, there should be no \acro{TOC} entry, so do not add tocdata. +% Use \cs{caption*} from the \pkg{caption} or similar packages. +% \begin{macrocode} +\IfBooleanTF{#1}% +{% starred +\IfValueTF{#2}{\caption*[#2]{#3}}{\caption*{#3}}% +}% +{% no starred +% \end{macrocode} +% No starred, so remember the artist's name for inclusion in the \acro{LOF}: +% \begin{macrocode} +\tocdata{lof}{#6 #7}% +% \end{macrocode} +% Create the caption depending on the optional name: +% \begin{macrocode} +\IfValueTF{#2}{\caption[#2]{#3}}{\caption{#3}}% +} +% \end{macrocode} +% Create an index entry depending on whether there is a first name: +% \begin{macrocode} +\ifblank{#6}% +{\index{#7}}% +{\index{#7, #6}}% +} +% \end{macrocode} +% \end{macro} +% +% \begin{figure}[hbp] +% \setlength{\fboxsep}{0pt} +% \centering +% \fbox{\includegraphics[width=4in]{lacquer_go_board.jpg}} +% \captionartist{Lacquer Go Board}[From the series, \textit{Uma Zukushi}.]{Katsushika}{Hokusai} +% \end{figure} +% +% +% +% +% ^^A At end: +% +% \clearpage +% ^^A \pagestyle{plain} +% \phantomsection +% \tocdata{toc}{Automated} +% \addcontentsline{toc}{section}{Change History and \indexname} +% +% \pagestyle{plain} +% +% \Finale +\endinput diff --git a/Master/texmf-dist/source/latex/tocdata/tocdata.ins b/Master/texmf-dist/source/latex/tocdata/tocdata.ins new file mode 100644 index 00000000000..85a47ccc63e --- /dev/null +++ b/Master/texmf-dist/source/latex/tocdata/tocdata.ins @@ -0,0 +1,46 @@ +%% tocdata.ins +%% Copyright 2016 Brian Dunn +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3 +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3 or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is Brian Dunn. +%% +%% This work consists of the files lwarp.dtx and lwarp.ins +%% and the derived file lwarp.sty. +\input docstrip.tex +\keepsilent +\usedir{tex/latex/ package } +\preamble +This is a generated file. +Copyright 2016 Brian Dunn + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3 +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of LaTeX +version 2005/12/01 or later. +\endpreamble +\generate{\file{tocdata.sty}{\from{tocdata.dtx}{package}}} +\Msg{*********************************************************} +\Msg{*} +\Msg{* To finish the installation you have to move the} +\Msg{* following file into a directory searched by TeX:} +\Msg{*} +\Msg{* \space\space tocdata.sty} +\Msg{*} +\Msg{* To produce the documentation run the file tocdata.dtx} +\Msg{* through LaTeX.} +\Msg{*} +\Msg{* Happy TeXing!} +\Msg{*********************************************************} +\endbatchfile -- cgit v1.2.3