From b6527411e29abb30e6ef7dd0166517b674a55753 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Fri, 12 Jan 2007 14:44:40 +0000 Subject: minutes update (to lose old big pdfs from blindtext?) git-svn-id: svn://tug.org/texlive/trunk@3383 c570f23f-e606-0410-a88d-b1316a301751 --- .../texmf-dist/source/latex/minutes/blindtext.dtx | 686 --------------------- .../texmf-dist/source/latex/minutes/blindtext.ins | 35 -- 2 files changed, 721 deletions(-) delete mode 100644 Master/texmf-dist/source/latex/minutes/blindtext.dtx delete mode 100644 Master/texmf-dist/source/latex/minutes/blindtext.ins (limited to 'Master/texmf-dist/source') diff --git a/Master/texmf-dist/source/latex/minutes/blindtext.dtx b/Master/texmf-dist/source/latex/minutes/blindtext.dtx deleted file mode 100644 index e37f2f12712..00000000000 --- a/Master/texmf-dist/source/latex/minutes/blindtext.dtx +++ /dev/null @@ -1,686 +0,0 @@ -% ^^A CTAN:macros/latex/contrib/supported/minutes -\def\fileversion{V1.4} -\def\filedate{2003/12/14} -% ^^A For index and changes, run: -% ^^A makeindex -s gglo -o blindtext.gls blindtext.glo -% ^^A makeindex -s gind -o blindtext.ind blindtext.idx -% -% \CheckSum{451} -%% -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -% \DoNotIndex{\" , \-, \flqq,\frqq, \ ,\def, \begin, \end} -% \DoNotIndex{\csname,\endcsname, \expandafter, \global, \newcommand} -% \DoNotIndex{\advance, \filedate, \fileversion, \MessageBreak} -% \DoNotIndex{\newcount, \newcounter, \newif, \or} -% \DoNotIndex{\if, \else, \fi, \ifcase, \ifdefined, \ifnum, \ifx, \loop, \repeat} -% \DoNotIndex{\heartsuit} -% \DoNotIndex{\NeedsTeXFormat, \providecommand, \ProvidesPackage, \relax, \RequirePackage} -% \DoNotIndex{\par, \chapter, \section, \subsection, \subsubsection, \paragraph, } -% \DoNotIndex{\selectlanguage, \stepcounter, \ss, \space, \setcounter} -% \DoNotIndex{\value, \typeout, \long, \renewcommand} -% -% \iffalse -%<*driver> -\documentclass{ltxdoc} -%\documentclass{refart} -%\usepackage{doc} -\usepackage[german,english]{babel} -\usepackage{blindtext} -\usepackage{makeidx} -\IfFileExists{hyperref.sty}{\usepackage{hyperref}}{} -\CodelineIndex -\makeindex -%\OnlyDescription -\begin{document} - \DocInput{Blindtext.dtx} -\end{document} -% -% -%<*package> -% \fi -% -% \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package -% \newcommand*{\Lenv}[1]{\texttt {#1}} ^^A typeset a package -% -% \title{Blindtext.sty:\\ -% Creating text for testing/ -% Texterzeugung zum testen} -% -% \author{Knut Lickert\\knut@lickert.net} -% \maketitle -% -%\begin{abstract} -%\selectlanguage{english} -%This packet create text with the commands \verb|\blindtext| and -%\verb|\Blindtext|. -%With this created text you can get an impression of the look -%of new classes and packages. -% -%\selectlanguage{german} -%Mit diesem Paket kann man lange Texte erzeugen, ohne lange -%Texte einzugeben. -%Sinn ist die Erzeugung langer Beispieltexte, ohne den -%Quelltext lang zu machen. -%\end{abstract} -% -%\selectlanguage{english} -%\section{Overview/{\"U}bersicht} -%\subsection{The commands/Die Kommandos} -%\begin{figure} -%\renewcommand{\arraystretch}{1.1} -%\begin{tabular}{p{0.3\textwidth}*{2}{p{0.3\textwidth}}}\hline -%Command/Makro & englisch & german \\\hline -%\verb|\blinddocument| & creates a document & erzeugt ein Dokument\\ -%\verb|\Blinddocument| & creates a big document & erzeugt ein gro{\ss}es Dokument\\ -%\verb|\blindtext| & creates text & erzeugt Text\\ -%\verb|\Blindtext| & creates more text & erzeugt mehr Text\\ -%\verb|\blindlist{env}| & creates a list & erzeugt eine Liste\\ -%\verb|\blindlistoptional|\newline\hspace*{2em}\verb|{env}| & creates a list with \verb|\item[]| & erzeugt eine Liste mit \verb|\item[]|\\ -%\verb|\blindlistlist[level]{env}| & creates cascaded lists & erzeugt geschachtelte Listen\\ -%\verb|\Blindlist{env}| & creates a big list & erzeugt eine gro{\ss}e Liste\\ -%\verb|\Blindlistoptional|\newline\hspace*{2em}\verb|{env}| & creates a big list with \verb|\item[]| & erzeugt eine gro{\ss}e Liste mit \verb|\item[]|\\ -%\verb|\blinditemize| & creates an itemize list & erzeugt eine itemize-Liste\\ -%\verb|\blindenumerate| & creates an enumerate list & erzeugt eine enume\-ra\-te-Liste\\ -%\verb|\blinddescription| & creates a description list & erzeugt eine des\-crip\-tion-Liste\\\hline -%$\sim$[x] & repetition & Wiederholungsfaktor\\ -% ^^A%\verb|\lovetext| & I love you in different languages & mehrsprachig: Ich liebe dich\\ -%\end{tabular} -%\caption{Command Overview} -%\end{figure} -% -% \DescribeMacro{\blinddocument} -% {\verb|\blinddocument|} create a document with sections, -% subsections\ldots and lists (\Lenv{itemize}, -% \Lenv{enumerate} and \Lenv{description}). -% \DescribeMacro{\Blinddocument} -% {\verb|\Blinddocument|} create a -% document with bigger sections, subsections\ldots and longer -% lists.\par -% -% The smallest document to check the look of a class would be: -% \begin{quote} -% \begin{verbatim} -% \documentclass{} -% \usepackage{blindtext} -% \begin{document} -% \blinddocument -% \end{document} -% \end{verbatim} -% \end{quote} -% -% \DescribeMacro{\blindtext} -% \verb|\blindtext[x]| create a text. The optional parameter defines a -% repetition. Default for the repetition is one and can be modified -% with \verb|\setcounter{blindtext}{1}|. -% -% \DescribeMacro{\Blindtext} -% {\verb|\Blindtext[x][y]|} create $x$ paragraphs with the text of -% {\verb|\blindtext|}. The first optional parameter defines a -% repetition of the paragraphs. Default for the repetition is five -% and can be modified with \verb|\setcounter{Blindtext}{5}|. The -% second optional parameter is given to \verb|\blindtext|. -% -% It is possible to add a start and end sequence for each paragraph. -% -% \DescribeMacro{\parstart} -% \DescribeMacro{\parend} -% The two macros \verb|\parstart| and \verb|\parend| define a -% starting and ending sequence for each paragraph in -% \verb|\Blindtext|. -% -% \DescribeMacro{\blindlist} -% {\verb|\blindlist{env}[x]|} create a list, the type is defined by the -% obligatory parameter. The optional parameter defines a repetition. -% Default for the repetition is five and can be modified with -% \verb|\setcounter{blindlist}{x}|. -% -% \DescribeMacro{\blindlistlist} -% {\verb|\blindlistlist[level]{env}[x]|} creates cascaded lists up to -% level \verb|level|, the type is defined by the second obligatory -% parameter. The optional parameter defines a repetition. Default is the -% same like in \verb|\blindlist|. -% -% \DescribeMacro{\Blindlist} -% \verb|\Blindlist{env}[x]| create a list with long texts. The optional parameter defines a -% repetition. Default for the repetition is five and can be modified -% with \verb|\setcounter{blindlist}{x}|. -% -% \DescribeMacro{\blindlistoptional} -% {\verb|\blindlistoptional{env}[x]|} create a list with \verb|\item[]|. The -% list is defined by the obligatory parameter. The optional -% parameter defines a repetition. Default for the repetition is five -% and can be modified with \verb|\setcounter{blindlist}{x}|. -% -% \DescribeMacro{\Blindlistoptional} -% \verb|\Blindlistoptional| create a list like -% \verb|\blindlistoptional| with long texts. -% -% \DescribeMacro{\blinditemize} \DescribeMacro{\Blinditemize} -% \DescribeMacro{\blindenumerate} \DescribeMacro{\Blindenumerate} -% \DescribeMacro{\blinddescription} \DescribeMacro{\Blinddescription} -% This commands are a abbreviation for \verb|\blindlist{itemize}|, \verb|\blindlist{enumerate}| -% and \verb|\blindlist{description}|. -% -% \StopEventually -% -% \selectlanguage{english} -% \section{Implementation/Implementierung} -% -% \begin{macrocode} -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{blindtext}[\filedate\space\fileversion\space% - blindtext-Package] -\typeout{Minutes-Package} -\RequirePackage{xspace} -% \end{macrocode} -% Just in case the french quote are not defined -% \begin{macrocode} -\providecommand{\frqq}{} -\providecommand{\flqq}{} -% \end{macrocode} -% -% First we need some counters for the number of repetitions of the -% text and the paragraphs. -% \begin{macrocode} -\newcounter{blindtext}\setcounter{blindtext}{1} -\newcounter{Blindtext}\setcounter{Blindtext}{5} -% \end{macrocode} -% -% \begin{macro}{\blindtext} -% -% \verb|\blindtext[x]| write $x\times$ a sentence. -% The default is stored in the counter \verb|blindtext|. This value -% can be changed with \verb|\setcounter{blindtext}{1}|. -% -% \begin{macrocode} -\newcommand{\blindtext}[1][\value{blindtext}]{ -\newcount\xx\xx=1 -\loop -\blindtext@text -\ifnum\xx<#1\advance\xx by 1 -\repeat -} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\Blindtext} -% \verb|\Blindtext[x][y]| execute $x\times$\verb|\blindtext[y]|. Each -% \verb|\blindtext[y]| built a paragraph. -% The default is stored in the counter \verb|Blindtext|. This value -% can be changed with \verb|\setcounter{Blindtext}{5}|. -% The counter \verb|blindtext@numBlindtext| stores the first -% optional parameter to be used in \verb|\blindtext@Blindtext|. -% \begin{macrocode} -\newcount\blindtext@numBlindtext -\newcommand{\Blindtext}[1][\value{Blindtext}]{ -\blindtext@numBlindtext=#1 -\blind@Blindtext} -% \end{macrocode} -% \end{macro} %^^ABlindtext -% -% \begin{macro}{\blind@Blindtext} -% This macro continue \verb|\Blindtext| with a second optional parameter. -% -% Each paragraph starts and end with a text, which can be defined with -% \verb|\starttext| or \verb|\endtext|. -% \begin{macrocode} -\newcommand{\blind@Blindtext}[1][\value{blindtext}]{ -\newcount\yy\yy=1 -\loop -{\blindtext@parstart\blindtext[#1]\blindtext@parend\par} -\ifnum\yy<\blindtext@numBlindtext\advance\yy by 1 -\repeat -} -% \end{macrocode} -% \end{macro}%^^A{\blind@Blindtext} -% -% \begin{macro}{\parstart} -% \begin{macro}{\parend} -% \begin{macrocode} -\newcommand{\blindtext@parstart}{} %Text at start of paragraph -\newcommand{\blindtext@parend}{} %Text at end of paragraph -\newcommand{\parstart}[1]{\renewcommand{\blindtext@parstart}{#1}} -\newcommand{\parend}[1]{\renewcommand{\blindtext@parend}{#1}} -% \end{macrocode} -% \end{macro}%^^A{\parstart} -% \end{macro}%^^A{\parend} -% -% \section{Lists} -% Here I define some flags to decide in the lists, if we have to -% create big items and if we need the optional parameter at -% \verb|\item|. This flags are reset in \verb|\blind@list|.\par -% The counter \verb|blindlist| define the default number of items in a list. -% The counter \verb|blindlistitem| is needed by \verb|\blindtext@count| -% to write a text like 'first', 'second'\ldots. -% \begin{macrocode} -\newif\ifblind@long\blind@longfalse -\newif\ifblind@optional\blind@optionalfalse -\newcounter{blindlist} -\newcounter{blindlistlevel}%Up tu X level -\newcounter{blindlist@level}%internal counter -\newcount\blind@listitem -% \end{macrocode} -% -% \begin{macro}{\blindlist} -% \begin{macro}{\blind@listtype} -% \verb|\blindlist{env}[x]| write a env-list with $x$ items. -% The default is stored in the counter \verb|blindlist|. This value -% can be changed with \verb|\setcounter{blindlist}{1}|. -% The type of list is stored in \verb|\blind@listtype|. -% \begin{macrocode} -%% ^^A----------------------------------------------------------- -\newcommand{\blindlist}[1]{ -\def\blind@listtype{#1} -\setcounter{blind@levelcount}{1} -\blind@list -} -% \end{macrocode} -% \end{macro}%^^A{\blindlist} -% \end{macro}%^^A{\blind@listtype} -% -% \begin{macro}{\blind@list} -% This macro continue the macro \verb|\blindlist| and with the -% optional parameter. After the printout, we reset the flags and the -% counter for the list text. -% \begin{macrocode} -\newcommand{\blind@list}[1][5]{ -\setcounter{blindlist}{#1} -\addtocounter{blindlist@level}{1}%depth of list -\blind@listitem=1 -\begin{\blind@listtype} -\blind@items -\end{\blind@listtype} -\blind@longfalse -\blind@optionalfalse -} -% \end{macrocode} -% \end{macro}%^^A{\blind@list} -% -% \begin{macro}{\blindlistlist} -% \verb|\blindlistlist[num]{env}[x]| writes cascaded lists up to level num. -% \begin{macrocode} -\newcommand{\blindlistlist}[2][4]{ -\setcounter{blindlistlevel}{#1} -\setcounter{blindlist@level}{0}%deepest reached level -\setcounter{blind@levelcount}{1}%actual level for printout -\def\blind@listtype{#2} -\blind@list -} -% \end{macrocode} -% \end{macro}%^^A{\blindlistlist} -% \begin{macro}{\blindlistlistoptional} -% Like \verb|\blindlistlist[num]{env}[x]| but for environment with optional parameters. -% \begin{macrocode} -\newcommand{\blindlistlistoptional}{ -\blind@optionaltrue -\blindlistlist -} -% \end{macrocode} -% \end{macro}%^^A{\blindlistlistoptional} -% -% \begin{macro}{\blinditemize} -% \begin{macro}{\blindenumerate} -% Some default macros for the standard environments. -% \begin{macrocode} -\newcommand{\blinditemize}{\blindlist{itemize}} -\newcommand{\blindenumerate}{\blindlist{enumerate}} -% \end{macrocode} -% \end{macro}%^^A{\blinditemize} -% \end{macro}%^^A{\blindenumerate} -% -% \verb|\Blindlist[x]| write a list with $x$ items. -% The default is stored in the counter \verb|blindlist|. This value -% can be changed with \verb|\setcounter{blindlist}{1}|. -% -% -% \begin{macro}{\Blindlist} -% \begin{macrocode} -\newcommand{\Blindlist}[1]{ -\blind@longtrue -\blindlist{#1} -} -% \end{macrocode} -% \end{macro}%^^A{\Blindlist} -% -% \begin{macro}{\Blinditemize} -% \begin{macro}{\Blindenumerate} -% Some default macros for the standard environments. -% \begin{macrocode} -\newcommand{\Blinditemize}{\Blindlist{itemize}} -\newcommand{\Blindenumerate}{\Blindlist{enumerate}} -% \end{macrocode} -% \end{macro}%^^A{\Blinditemize} -% \end{macro}%^^A{\Blindenumerate} -% -% \begin{macro}{\blindlistoptional} -% Here we start a list with \verb|\item[]|. So we set the flag for optional -% parameter and start the normal list. -% \begin{macrocode} -\newcommand{\blindlistoptional}[1]{ -\blind@optionaltrue -\blindlist{#1} -} -% \end{macrocode} -% \end{macro}%^^A{\blindlistoptional} -% -% \begin{macro}{\Blindlistoptional} -% Now a big list with optional parameter at \verb|\item|. -% \begin{macrocode} -\newcommand{\Blindlistoptional}[1]{ -\blind@optionaltrue -\blind@longtrue -\blindlist{#1} -} -% \end{macrocode} -% \end{macro}%^^A{\blindlistoptional} -% -% \begin{macro}{\blinddescription} -% \begin{macro}{\Blinddescription} -% Some default macros for the standard environment description. -% \begin{macrocode} -\newcommand{\blinddescription}{\blindlistoptional{description}} -\newcommand{\Blinddescription}{\Blindlistoptional{description}} -\newcounter{listcount} -\newcounter{blind@levelcount} -% \end{macrocode} -% \end{macro}%^^A{\blinddescription} -% \end{macro}%^^A{\Blinddescription} -% -% \begin{macro}{\blind@items} -% Here the \verb|\item| are written. -% A local counter is defined and the \verb|\item| is written. The -% type of \verb|\item| is influenced by the flags. -% \begin{macrocode} -\newcommand{\blind@items}{ -\setcounter{listcount}{1} -\loop -\ifblind@optional - \ifblind@long - \item[\blindtext@countitem] \blindtext@text - \else - \item[\blindtext@count] \blindtext@item - \fi -\else%\blind@optionalfalse - \ifblind@long - \item \blindtext@text - \else - \item \blindtext@countitem - \fi -\fi%\ifblind@optional -% \end{macrocode} -% Loop for cascaded lists. -% \changes{V1.3}{2003-05-18}{Cascaded lists} -% \begin{macrocode} -{\loop - \ifnum\value{blindlistlevel}>\value{blindlist@level} - \addtocounter{blind@levelcount}{1} - \blind@list[\value{blindlist}]\relax - \addtocounter{blind@levelcount}{-1} - \setcounter{listcount}{1} -\repeat} -\ifnum\value{listcount}<\value{blindlist}\addtocounter{listcount}{1} -% \end{macrocode} -% Correction for nested values. -% \begin{macrocode} -% \end{macrocode} -% Close the loop -% \begin{macrocode} -\repeat -} -% \end{macrocode} -% \end{macro}%^^A{\blind@item} -%% ^^A----------------------------------------------------------- -% \section{A sample document} -% \begin{macro}{\blinddocument} -% \verb|\blinddocument| adds a document with \verb|\chapter|, -% \verb|\section|\ldots, texts and lists (itemize, enumerate, -% description). -% \begin{macrocode} -\newcommand{\blinddocument}{ -\@ifundefined{chapter}{}{% - \chapter{\blindtext@heading 0 (chapter)}\blindtext% - } -\section{ \blindtext@heading 1 (section)} \blindtext -\subsection{ \blindtext@heading 2 (subsection)} \blindtext -\subsubsection{ \blindtext@heading 3 (subsubsection)} \blindtext -\paragraph{ \blindtext@heading 4 (paragraph)} \blindtext -\section{\blindtext@list} -\subsection{\blindtext@listEx (itemize)} - \blinditemize - \subsubsection{\blindtext@listEx (4*itemize)} - \blindlistlist{itemize}[2] -\subsection{\blindtext@listEx (enumerate)} - \blindenumerate - \subsubsection{\blindtext@listEx (4*enumerate)} - \blindlistlist{enumerate}[2] -\subsection{\blindtext@listEx (description)} - \blinddescription - \subsubsection{\blindtext@listEx (4*description)} - \blindlistlistoptional{description}[2] -} -% \end{macrocode} -% \end{macro}%^^A{\blinddocument} -% -% \begin{macro}{\Blinddocument} -% \verb|\blinddocument| adds a document with \verb|\chapter|, -% \verb|\section|\ldots, texts and lists (itemize, enumerate, -% description). -% \begin{macrocode} -\newcommand{\Blinddocument}{ -\@ifundefined{chapter}{}{% - \chapter{\blindtext@heading 0 (chapter)}\blindtext% - } -\section{ \blindtext@heading 1 (section)} \Blindtext -\subsection{ \blindtext@heading 2 (subsection)} \Blindtext -\subsubsection{ \blindtext@heading 3 (subsection)} \Blindtext -\paragraph{ \blindtext@heading 4 (paragraph)} \Blindtext -\section{\blindtext@list} -\subsection{\blindtext@listEx (itemize)} - \Blinditemize - \subsubsection{\blindtext@listEx (4*itemize)} - \blind@longtrue - \blindlistlist{itemize}[2] -\subsection{\blindtext@listEx (enumerate)} - \Blindenumerate - \subsubsection{\blindtext@listEx (4*enumerate)} - \blind@longtrue - \blindlistlist{enumerate}[2] -\subsection{\blindtext@listEx (description)} - \Blinddescription - \subsubsection{\blindtext@listEx (4*description)} - \blind@longtrue - \blindlistlistoptional{description}[2] -} -% \end{macrocode} -% \end{macro}%^^A{\Blinddocument} -% -%% ^^A----------------------------------------------------------- -% \section{The texts} -% \begin{macro}{\addto} -% If babel is not loaded, we need the command \verb|\addto|. -% \begin{macrocode} -%\providecommand{\addto}[2]{#2} -\@ifundefined{addto}{ -\@ifpackageloaded{babel}{}{ -\PackageWarning{blindtext}{% -You are not using babel.sty -> Language by random\MessageBreak -Kein babel.sty verwendet -> Zufallssprache}} -\newcommand{\addto}[2]{#2} -}{} -% \end{macrocode} -% \end{macro}%^^A\addto -% -% \subsection{Default without language} -% First all texts without any language. If you make a new translation, please -% define all this macros. -% \begin{macrocode} -\def\blindtext@text{Text} -\def\blindtext@count{\ifcase\blind@listitem\or - First\or Second %... - \else Last\blind@listitem=0\fi - \global\advance\blind@listitem by 1 -}%\blindtext@count} -\def\blindtext@item{itemtext} -\def\blindtext@countitem{\blindtext@count\ \blindtext@item} -\def\blindtext@heading{Heading on level\xspace} -\def\blindtext@list{Lists} -\def\blindtext@listEx{Example for list\xspace} -% \end{macrocode} -% -% \subsection{English Texts} -% \begin{macrocode} -\addto\extrasenglish{ -\def\blindtext@text{ -Hello, here is some text without a meaning. This text should show, -how a printed text will look like at this place. If you read this -text, you will get no information. Really? Is there no -information? Is there a difference between this text and some -nonsense like \frqq Huardest gefburn\flqq? Kjift -- Never mind! A -blind text like this gives you information about the selected -font, how the letters are written and the impression of the look. -This text should contain all letters of the alphabet and it should -be written in of the original language. There is no need for a -special contents, but the length of words should match to the -language.}%\blindtext@text -} -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasenglish{ -\def\blindtext@count{\ifcase\value{listcount}\or - First\or Second \or Third \or Fourth\or Fivth\or - Sixth\or Seventh\or Eighth \or Ninth\or Tenth\or - Eleventh\or Twelfth - \else Another - \fi -}%\blindtext@count -\def\blindtext@item{item in a list} %, level~\arabic{blindlist@level}} -} %\addto\extrasenglish -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasenglish{ - \def\blindtext@heading{Heading on level\xspace} - \def\blindtext@list{Lists} - \def\blindtext@listEx{Example for list\xspace} -} %\addto\extrasenglish -% -% \end{macrocode} -% \subsection{German Texts} -% -% \begin{macrocode} -\addto\extrasgerman{ -\def\blindtext@text{ -Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer -diesen Text liest, ist selbst schuld. Der Text gibt lediglich den -Grauwert der Schrift an. Ist das wirklich so? Ist es -gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein -Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift -- -mitnichten! Ein Blindtext bietet mir wichtige Informationen. An -ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie -harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit -oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele -verschiedene Buchstaben enthalten und in der Originalsprache -gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar -sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen -nicht dem eigentlichen Zweck, da sie eine -falsche Anmutung vermitteln.}%\blindtext@text -} -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasgerman{ -\def\blindtext@count{\ifcase\value{listcount}\or - Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or - Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or - Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter - \else Noch ein\fi -}%\blindtext@count -\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}} -}% %\addto\extrasgerman -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasgerman{ - \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace} - \def\blindtext@list{Listen} - \def\blindtext@listEx{Beispiel einer Liste\xspace} -} %\addto\extrasgerman -% -% If the packet \Lpack{german} is loaded, select the language. -% \begin{macrocode} -\@ifpackageloaded{german}{\selectlanguage{german}}{} -% \end{macrocode} -% -% \subsection{German - New typesetting} -% \begin{macrocode} -\addto\extrasngerman{ -\def\blindtext@text{ -Dies hier ist ein Blindtext zum Testen von Textausgaben. Wer -diesen Text liest, ist selbst schuld. Der Text gibt lediglich den -Grauwert der Schrift an. Ist das wirklich so? Ist es -gleich\-g\"ul\-tig ob ich schreibe: \frqq Dies ist ein -Blindtext\flqq\ oder \frqq Huardest gefburn\flqq? Kjift -- -mitnichten! Ein Blindtext bietet mir wichtige Informationen. An -ihm messe ich die Lesbarkeit einer Schrift, ihre Anmutung, wie -harmonisch die Figuren zueinander stehen und pr\"u\-fe, wie breit -oder schmal sie l\"auft. Ein Blindtext sollte m\"og\-lichst viele -verschiedene Buchstaben enthalten und in der Originalsprache -gesetzt sein. Er mu\ss\ keinen Sinn ergeben, sollte aber lesbar -sein. Fremdsprachige Texte wie \frqq Lorem ipsum\flqq\ dienen -nicht dem eigentlichen Zweck, da sie eine -falsche Anmutung vermitteln.}%\blindtext@text -} -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasngerman{ -\def\blindtext@count{\ifcase\value{listcount}\or - Erster\or Zweiter \or Dritter \or Vierter \or F{\"u}nfter \or - Sechster \or Siebter\or Achter \or Neunter \or Zehnter\or - Elfter \or Zw{\"o}lfter \or Dreizehnter \or Vierzehnter - \else Noch ein\fi -}%\blindtext@count -\def\blindtext@item{Listenpunkt, Stufe~\arabic{blind@levelcount}} -}% %\addto\extrasgerman -% \end{macrocode} -% -% \begin{macrocode} -\addto\extrasngerman{ - \def\blindtext@heading{{\"U}berschrift auf Ebene\xspace} - \def\blindtext@list{Listen} - \def\blindtext@listEx{Beispiel einer Liste\xspace} -} %\addto\extrasngerman -% -% If the packet \Lpack{ngerman} is loaded, select the language. -% \begin{macrocode} -\@ifpackageloaded{ngerman}{\selectlanguage{ngerman}}{} -% \end{macrocode} -% -% \section{Some other macros} -% \changes{V1.2b}{2001/05/25}{Add macros vieltext and alotoftext} -% \begin{macro}{\alotoftext} -% \begin{macrocode} -\let\alotoftext=\blindtext -% \end{macrocode} -% \end{macro}%^^A\alotoftext -% -% \Finale -% \PrintIndex -% \end{document} -% diff --git a/Master/texmf-dist/source/latex/minutes/blindtext.ins b/Master/texmf-dist/source/latex/minutes/blindtext.ins deleted file mode 100644 index 20275f130ef..00000000000 --- a/Master/texmf-dist/source/latex/minutes/blindtext.ins +++ /dev/null @@ -1,35 +0,0 @@ -\def\batchfile{blindtext.ins} -\input docstrip.tex -\keepsilent -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -\preamble ----------------------------------------------------------------------- -The original file is loadable from CTAN on: -macros/latex/contrib/supported/minutes - -Name of contribution: minutes -Name and email: Knut Lickert -Location on CTAN: tex-archive/macros/latex/contrib/supported/lickert -Summary description: Package for writing text -License type: Free - -Announcement text: -blindtext.sty: - Style to create text. - Can be used to create examples with a lot text to become a feeling - for the look of classes, packages... ----------------------------------------------------------------------- -\endpreamble - -\generateFile{blindtext.sty}{f}{\from{blindtext.dtx}{package}} - -\Msg{***************************************************************} -\Msg{*} -\Msg{* To finish the installation you have to copy the files } -\Msg{*} -\Msg{*\space\space *.sty, *.cfg into a directory searched by TeX} -\Msg{*} -\Msg{***************************************************************} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -\endinput -- cgit v1.2.3