From 7565be950065c44ddd2808eed2e63588d89768a7 Mon Sep 17 00:00:00 2001
From: Karl Berry <karl@freefriends.org>
Date: Sun, 20 May 2007 20:42:15 +0000
Subject: new latex package mlist (19may07)

git-svn-id: svn://tug.org/texlive/trunk@4323 c570f23f-e606-0410-a88d-b1316a301751
---
 Master/texmf-dist/source/latex/mlist/mlist.dtx | 1380 ++++++++++++++++++++++++
 Master/texmf-dist/source/latex/mlist/mlist.ins |   61 ++
 2 files changed, 1441 insertions(+)
 create mode 100644 Master/texmf-dist/source/latex/mlist/mlist.dtx
 create mode 100644 Master/texmf-dist/source/latex/mlist/mlist.ins

(limited to 'Master/texmf-dist/source')

diff --git a/Master/texmf-dist/source/latex/mlist/mlist.dtx b/Master/texmf-dist/source/latex/mlist/mlist.dtx
new file mode 100644
index 00000000000..4b12378256e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/mlist/mlist.dtx
@@ -0,0 +1,1380 @@
+% \iffalse meta-comment
+%
+%
+% Copyright (C) 2007 by Will Robertson <wspr81@gmail.com>
+% 
+% Distributable under the LaTeX Project Public License,
+% version 1.3c or higher (your choice). The latest version of
+% this license is at: http://www.latex-project.org/lppl.txt
+%
+% This work is "maintained" (as per LPPL maintenance status) 
+% by Will Robertson.
+% 
+% This work consists of the file  mlist.dtx
+%           and the derived files mlist.sty and mlist.pdf.
+%
+%
+%<*internalbatchfile>
+\begingroup
+%</internalbatchfile>
+%<*batchfile>
+\input docstrip.tex
+\keepsilent
+\preamble
+
+  __________________________________
+  Copyright (C) 2006  Will Robertson
+
+  License information appended.
+
+
+\endpreamble
+\postamble
+
+Copyright (C) 2007 by Will Robertson <wspr81@gmail.com>
+
+Distributable under the LaTeX Project Public License,
+version 1.3c or higher (your choice). The latest version of
+this license is at: http://www.latex-project.org/lppl.txt
+
+This work is "maintained" (as per LPPL maintenance status) 
+by Will Robertson.
+
+This work consists of the file  \jobname.dtx
+          and the derived files \jobname.sty and \jobname.pdf.
+
+\endpostamble
+\askforoverwritefalse
+\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}
+                              \from{\jobname.dtx}{defaults}}}
+\generate{\file{\jobname.ins}{\from{\jobname.dtx}{batchfile}}}
+\nopreamble\nopostamble
+\generate{\file{README.txt}{\from{\jobname.dtx}{readme}}}
+\generate{\file{dtx-style.sty}{\from{\jobname.dtx}{dtx-style}}}
+%</batchfile>
+%<batchfile>\endbatchfile
+%<*internalbatchfile>
+\endgroup
+\immediate\write18{makeindex -s gind.ist -o \jobname.ind  \jobname.idx}
+\immediate\write18{makeindex -s gglo.ist -o \jobname.gls  \jobname.glo}
+\immediate\write18{mv README.txt README}
+%</internalbatchfile>
+%
+%<*driver>
+\documentclass{ltxdoc}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+%\OnlyDescription
+\usepackage{dtx-style}
+\begin{document}
+  \DocInput{\jobname.dtx}
+\end{document}
+%</driver>
+%
+%<*readme>
+_________________
+The MLIST package
+v0.4
+
+This package defines the commands \newvect, \newmatr, and \newfunc for
+creating macros to typeset vectors, matrices, and functions. For
+example, Logical indexing can then be used to refer to elements or
+arguments without hard-coding the symbols in the document:
+
+    \newvect\myvect{V}[elem=a,b,c]
+    \myvect{1,2,3}
+
+produces
+
+    \left( V_a, V_b, V_c \right)
+
+All aspects of the typeset appearance can be adjusted, and new `mlists'
+can be defined to represent other mathematical constructs.
+
+Consider this package an exploration of separation of form and content
+for some mathematical constructions. I hope you find it useful.
+
+______________
+Will Robertson
+wspr 81 [at] gmail [dot] com
+
+Copyright 2007
+Distributed under the LaTeX Project Public License
+
+%</readme>
+%
+% \fi
+%
+% \GetFileInfo{\jobname.sty}
+% \CheckSum{0}
+% \makeatletter
+%
+% \title{Logical markup for lists}
+% \author{Will Robertson}
+% \date{\filedate \qquad \fileversion}
+%
+% \maketitle
+%
+% \tableofcontents
+% \clearpage
+%
+% \section{Introduction}
+%
+% One of \LaTeX's lauded features is its separation of form and
+% content. When writing a document, they say, you can just focus on
+% the words. Well, that may be well and good for prose, but
+% mathematicians have frequently been left out in the cold. A funny
+% situation, considering \LaTeX's main audience.
+%
+% Recently, the \pkg{cool} package appeared, marking the first
+% large-scale format-independent method of writing maths in
+% \LaTeX. Need to change the brackets surrounding the arguments of
+% \cmd\sin\ and \cmd\cos, or switch from $\tan^{-1}$ to $\arctan$
+% throughout an entire document? No worries.
+%
+% This sort of initiative will allow much easier transfer of
+% mathematics from such software packages as Mathematica and Matlab,
+% if it becomes popular enough.
+%
+% This package, \pkg{\jobname}, provides a method to write various
+% sorts of mathematical lists without having to worry about
+% formatting.  When I say `lists', I mean things like
+% $\vect{A}=\vect{A}{1,2,3}$; to me as a mechanical engineer, vectors
+% and matrices; but the package is more general than that, I hope.
+%
+% You can use \pkg{\jobname} straight away with
+% \codeline \cmd\usepackage\texttt{\char`\{\jobname\char`\}}\\
+% and
+% \codeline |$\vect{A}=\vect{A}{1,2,3}$|\\
+% to get the example in the previous paragraph, but \emph{please}
+% keep reading to learn its more useful features.
+%
+% \section{Basic Functionality}\seclabel{vect}
+%
+% \subsection{Prototypical example: vector notation}
+%
+% \DescribeMacro{\newvect}
+% This example demonstrates why I wrote this package. The control
+% sequence \cmd\dist\ is defined as a vector with any number of elements.  The
+% vector and its elements can be subsequently referred to without
+% hard-coding any of the mathematical symbols or brackets used.
+% \begin{example}{}
+% \newvect\dist{D}[elem={r,\phi,\theta}]
+% \[ \dist \qquad \dist{2}
+%          \qquad \dist{1,2,3} \]
+% \end{example}
+%
+% \subsection{Matrix and function notation}
+%
+% So the basic idea of this package is to separate the formatting and
+% content of mathematical objects. The above example showed vector
+% notation, and there are two more `data structures' that are defined
+% `out of the box'.
+%
+% \DescribeMacro{\newmatr} The second example is for matrices, which
+% one might consider quite similar to vectors; but by default the
+% formatting internally uses \pkg{amsmath}'s |{bmatrix}|
+% environment. Note that it's a very good idea to give your maths
+% objects actual \emph{names} rather than shorthands like |\M|---who
+% knows if you'll still be calling it `M' in ten years time?
+% \begin{example}{}
+% \newmatr\massm{M}[elem={m,0;0,m+M}]
+% \[ \massm \qquad \massm{4}
+%           \qquad \massm{1,2;3,4} \]
+% \end{example}
+%
+% Again, it is possible then to change the brackets used for matrices
+% throughout an entire document (or collection of documents) without
+% changing the fundamental markup of the mathematics itself.
+%
+% \DescribeMacro{\newfunc} Finally, here's something a little
+% different. Vector and matrices are both quite similar. But it takes
+% only a slight stretch to extend the syntax of this package to things
+% completely different---such as functions:\label{func-example}
+% \begin{example}{}
+% \newfunc\traj{T}[elem={x_0;x,t},index={1;2,3}]
+% \[ \traj \qquad \traj{2} \qquad \traj{2,3} \]
+% \end{example}
+% 
+% For example, Mathematica users may wish to typeset their arguments
+% with square brackets in their own documents but not for published
+% papers. To hammer home the point: this can be now done for an entire
+% document with a simple switch.
+%
+% \subsubsection{Non-specific commands}
+% Sometimes you don't always want to define new macros for one-off
+% maths expressions.  Accompanying the \cmd\newvect, \cmd\newmatr, and
+% \cmd\newfunc\ macros are \cmd\vect, \cmd\matr, and \cmd\func, which
+% can be used for single cases:
+% \begin{example}{}
+% \[ \vect{V}{a,b,c}   \qquad 
+%    \matr{M}{a,b;c,d} \qquad 
+%    \func{f}{x_0;x,t}     \]
+% \end{example}
+%
+% This usage is generally not recommended except in isolated cases.
+%
+% \subsection{An example of some actual maths}
+% 
+% Here's a practical example using \cmd\matr\ that I think demonstrates
+% well the advantages of using this package:
+% \begin{example}{}
+% \newmatr\state{x}
+%   [elem={x_1;\dot x_1},index={1;2}]
+% \newmatr\dyn{A}
+%   [elem={0,1;-K/M,-C/M},
+%    index={1,2;3,4}]
+% \[ \dot{\state{}} = \dyn{}\state{} \]
+% \[ \state{} = \state \]
+% \[ \dyn{} = \dyn \]
+% \[ \frac\partial{\partial t} 
+%     \state = \dyn \state \]
+% \end{example}
+%
+% There's a lot more semantic meaning in that mathematical \TeX\ source than if it were hard-coded without this package.
+%
+% \subsection{Elements and indexing}\seclabel{indexing}
+%
+% For context for the following explanations, here's our first example again:
+% \begin{example}{}
+% \newvect\dist{D}[elem={r,\phi,\theta}]
+% \[ \dist \qquad \dist{2} \qquad \dist{1,2,3} \]
+% \end{example}
+% \newvect\dist{D}[elem={r,\phi,\theta}]
+%
+% Each command created like \cmd\dist\ takes zero or one arguments, as shown
+% above. Unlike regular \LaTeX\ commands with optional arguments, these still
+% use curly braces, and an empty argument is equivalent (by default) to omitting the argument altogether:
+% \codeline |\dist{}|~$\to~\dist{}$\quad$\equiv$\quad|\dist|~$\to~\dist$ .
+%
+% While numerical indexing is used to extract \opt{elem} items from
+% the list, \emph{any} argument can be used instead that is passed
+% through directly: 
+% \codeline |\dist{x^2}|~$\to~\dist{x^2}$ .
+%
+% As we saw for the matrix examples, the input may actually be
+% `two-dimensional'; as well as being comma-separated, elements (and
+% sets of elements) may also be separated by semi-colons: 
+% \codeline |\dist{x;y;z}|~$\to~\dist{x;y;z}$ .
+%
+% Input elements can also be specified with semi-colon separators to
+% match up with two-dimensional element indexing. There are two ways
+% to reference these elements: with a linear index from one to the
+% number of elements in |elem|; or with `implicit indexing' that
+% starts from one for every semi-colon list. Implicit indices are
+% prefix with the |@| symbol.\footnote{The implicit indexing syntax
+%   will work \emph{even if} \cmd\makeatletter\ is in effect.} An
+% example is useful to show how this works:
+% \begin{example}{}
+% \newvect\V{V}[elem={a,b,c;x,y,z}]
+% \[ \V=\V{1,2,3;4,5,6} \]
+% \[ \V=\V{4,5,6} \]
+% \[ \V=\V{1,2,3;@1,@2,@3} \]
+% \end{example}
+%
+% See \tabref{index-syntax} for a more detailed example of the indexing system.
+%
+% \begin{table}
+%  \topcaption{How two-dimension lists elements are indexed. The first row shows the input list via \opt{elem=\{\}}. The second and third rows respectively show the direct index and implicit index required to reference the elements of the list.}
+% \tablabel{index-syntax}
+% \centering
+% \begin{tabular}{@{}l@{\quad\{~}c@{~,~}c@{~,~}c@{~;~}c@{~,~}c@{~;~}c@{~\}}}
+% \toprule
+% List           & a  & b  & c  & d  & e  & f  \\
+% Direct index   & 1  & 2  & 3  & 4  & 5  & 6  \\
+% Implicit index & @1 & @2 & @3 & @1 & @2 & @1 \\
+% \bottomrule
+% \end{tabular}
+% \end{table}
+%
+% You can also set the default element list when defining a vector. In this case, an empty list argument is not equivalent to omitting one:
+% \begin{example}{}
+% \newvect\LL{L}[elem={i,j,k},index={1,2,3}]
+% $\LL$ \quad vs.\quad $\LL{}$ 
+%       \quad vs.\quad $\LL{1,2} $
+% \end{example}
+%
+% This was shown originally in the function example on page~\pageref{func-example}.
+%
+% \subsection{Shorthand indices and empty elements}
+%
+% Shorthands are defined to allow things that
+% \emph{aren't} elements into the list.
+% In this example, the semi-colon separation is shown with the
+% \cmd\dots\ shorthand `|:|' and the \cmd\cdot\ shorthand `|.|'.
+% \begin{example}{}
+% \newvect\mset{M}
+% \[ \mset=\mset{1,2,:,5;a,b,.,d} \]
+% \end{example}
+%
+% More shorthands will be defined in the future via 
+% an extensible mechanism that does not yet exist.
+%
+%  Empty arguments are ignored (where `empty' $\equiv$ empty or whitespace). 
+% \begin{example}{}
+% \newvect\nset{N}
+% \[ \nset=\nset{1,,,3, ,5;;,2,;} \]
+% \end{example}
+%
+% \subsection{\cmd\dots}
+%
+% Finally, some macros are defined in order to be able to typeset
+% unknown ranges ($1,2,\dots,N$) without hard-coding the symbol of the
+% maximum element. Similarly, it is also useful to denote a
+% `mid-range' element somewhere inside the ellipses. Note the equivalence in defining the mid and last elements and indexing them.
+% \begin{example}{}
+% \newvect\W{W}[elem={i,j,k,:,w}]
+% \newvect\Y{Y}[elem={i,j,k,:,p,:,y}]
+% \[ \W=\W{1,2,:,\LAST-1,\LAST} \]
+% \[ \Y=\Y{1,2,:,\MID,:,\LAST} \]
+% \end{example}
+%
+% \noindent The \cmd\MID\ and \cmd\LAST\ control sequences are `implicit' for two dimensional lists:
+%
+% \begin{example}{}
+% \newvect\X{X}[%
+%   elem={i,j,k,:,m,:,w;ii,jj,kk,:,mm,:,ww}]
+% \[ \X{1,:,\MID,:,\LAST;@1,:,\MID,:,\LAST} \]
+% \[ \X{1,2,3;4,5,6} \]
+% \end{example}
+%
+% Finally, note well above that any |{:,X}| pairs for mid/last element definitions do \emph{not} add to the direct index numbering.
+%
+%
+% \section{Generalisation}
+%
+% \DescribeMacro{\newmlist}
+% \DescribeMacro{\renewmlist}
+% The \cmd\newvect\ command that has been
+% often shown previously is an example of a macro created with
+% \cmd\newmlist, which can be considered something like an
+% \emph{instance generator} for the types of lists we're dealing with.
+% Use \cmd\renewmlist\ if the command is already in use.
+%
+% \cmd\newmlist\cs{<list>}\marg{list options} creates macros
+% \cs{<list>} and \cs{new<list>} (and \cs{renew<list>}) that are
+% analogous to \cmd\vect\ and \cmd\newvect\ seen in
+% \secref{vect}. \meta{list options} can contain any of those seen so
+% far in previous \cmd\newvect\ macros, plus more to be introduced
+% soon.
+%
+% In the examples to follow, \cmd\vect\ and \cmd\newvect\ are often
+% still used to demonstrate various options, overriding the defaults.
+%
+% \subsection{Head and element formatting}
+%
+% The \opt{headcmd} and \opt{elemcmd} options are used to alter the
+% formatting of the vector symbol and its elements. They are passed
+% \emph{macros} that take, respectively, one and two arguments that
+% define the formatting.
+%
+% For \cmd\vect, |headcmd=\mathbf| and |elemcmd=\mlistsub|, where
+% \codeline \cmd\mlistsub |{#1}{#2}|~$\to$~|#1_{#2}|.\\
+% \cmd \mlistsup, the
+% analogous command for creating superscripts, is defined by the
+% package in case you need it.
+%
+% In this example, the vector symbol is formatted with an arrow accent,
+% and the elements are exactly as specified in \opt{elem}.
+% \begin{example}{}
+% \newvect\A{A}[%
+%   headcmd=\vec,
+%   elemcmd=\mlistelem,
+%   elem={a,b,c,d}]
+%
+% \[\A \qquad \A{1,2,3,4} \qquad \A{3} \]
+% \end{example}
+%
+% The \cmd\mlistelem\ command (with its friend, \cmd\mlisthead) is defined as follows:
+% \codeline\cmd\mlistelem|{#1}{#2}|~$\to$~|#2|
+% \codeline\cmd\mlisthead|{#1}|~$\to$~|#1|
+%
+% In \secref{indexing}, we saw that list indexing doesn't \emph{have}
+% to be numerical.  In this example, the use of \cmd\@alph\ allows
+% alphabetic subscripts but non-numeric indices will produce errors:
+% \begin{example}{}
+% \makeatletter
+% \newcommand\subalph[2]{#1_{\@alph{#2}}}
+% \makeatother
+% \newvect\A{A}[%
+%   elemcmd=\subalph]
+%
+% \[ \A{1,2,3,4} \qquad \A{3} \]
+% \end{example}
+%
+% \subsection{Delimiter formatting}
+%
+% The \opt{wrap} and \opt{wrapone} options are used to change the way
+% elements are displayed together. Each take two
+% arguments to define the opening and closing material. 
+%
+% By default, if there is more than one element, it is surrounded by
+% square brackets: |wrap=[]|. A single element is typeset naked:
+% |wrapone={}{}|.  If \opt{wrapone} is called with no `|=|' argument, it
+% takes the same value as \opt{wrap}.
+%
+% In this example, the brackets around the sets are changed to
+% parentheses, including single elements. The behaviour for a single
+% element is then changed to use angle brackets:
+% \begin{example}{firstline=2}
+% \parskip1ex
+% \newvect\Q{Q}
+% $\Q + \Q{1} + \Q{a,b}$
+%
+% \newvect\QQ{Q}[wrap=(),wrapone]
+% $\QQ + \QQ{1} + \QQ{a,b}$
+%
+% \newvect\QQQ{Q}[wrapone={\left<}{\right>}]
+% $\QQQ + \QQQ{1} + \QQQ{a,b}$
+% \end{example}
+%
+% Rather than defining the open/close material around a set of
+% elements, it can often be necessary to define a macro that defines
+% the formatting of the set. The \opt{wrapcmd} and \opt{wraponecmd}
+% options are used for this purpose, and take as argument a single
+% macro that accepts two arguments: the list head and the
+% list elements, respectively.
+%
+% \begin{example}{firstline=2}
+% \parskip1ex
+% \newvect\R{R}
+% $\R + \R{1} + \R{a,b}$
+%
+% \newcommand\mywrap[2]{\langle{\color{red}#2}\rangle_{#1}}
+% \newvect\RR{R}[wrapcmd=\mywrap,wraponecmd]
+% $\RR + \RR{1} + \RR{a,b}$
+%
+% \newcommand\mywrapone[2]{\{{\color{green}#2}\}^{#1}}
+% \newvect\RRR{R}[
+%   wrapcmd=\mywrap,
+%   wraponecmd=\mywrapone]
+% $\RRR + \RRR{1} + \RRR{a,b}$
+% \end{example}
+%
+% \pkg{mlist} provides some example commands for this purpose:\par
+% \begingroup\ttfamily
+% \def\mean#1{\string#1 & \expandafter\parse@meaning\meaning#1\@nil}
+% \def\parse@meaning #1:#2->#3\@nil{\detokenize{#3}\\}
+% \begin{tabular}{l@{$~\to~$}l}
+% \mean\mlistnowrap
+% \mean\mlistparen
+% \mean\mlistbrack
+% \mean\mlistbrace
+% \mean\mlistangle
+% \mean\mlistheadparen
+% \mean\mlistheadbrack
+% \mean\mlistheadbrace
+% \mean\mlistheadangle
+% \end{tabular}
+% \endgroup
+%
+% \subsection{Separator formatting}
+%
+% The \opt{sep} and \opt{sepsep} options take one argument that is inserted between items in comma and semi-colon lists, respectively. For example, in the \cmd\matr\ list these are defined with |[sep=&, sepsep=\\]|.
+%
+% Here's another example:
+% \begin{example}{}
+% \newvect\mysum{S}[
+%   sep=+,
+%   wrap={}{},
+%   dots=\cdots]
+% $\mysum{a,b,c,d,:,p,q,r,s,:,x,y,z}$
+% \end{example}
+%
+% \subsection{Global options definition}
+%
+% \DescribeMacro{\mlistsetup} If options aren't specified in
+% \cmd\newmlist\ they are inherited from the global defaults, which
+% may be adjusted with \cmd\mlistsetup\marg{mlist options}. The defaults
+% are shown in \secref[vref]{defaults}.
+%
+% \subsection{Redefining \cmd\vect, \cmd\matr, \cmd\func}
+%
+% This package makes little claim for being imminently usable for most
+% people \emph{out of the box}. I figure there's just too much
+% variety; people need to define their own `mlists' with \cmd\newmlist.
+%
+% If changes to the mlists provided by default with this package
+% are required (as they will be if any aspect of their formatting needs
+% to be adjusted), simply copy their definitions from \secref[vref]{defaults}
+% in a \cmd\renewmlist.
+%
+% In the future I hope to implement a local \cmd\mlistsetup, but not now.
+%
+% 
+%
+% \section{TODO}
+% \begin{itemize}
+% \item changing features of (or adding features to, rather) `newvect'
+%   constructions, rather than overwriting them.
+% \item generalise escaping strings like |:|$\to$|\dots|, etc.
+% \item accents and appended/prepended material migrating inside the
+%   head (and/or each element) argument.
+% \item optional arguments for \cmd\MID\ and \cmd\LAST\ (for explicit indexing).
+% \item coercing one type of list into another 
+%       (and retrieving non-wrapped lists as a special case)
+% \item use ltx3!
+% \end{itemize}
+%
+%\iffalse
+%<*defaults>
+%\fi
+%
+% \section{The default definitions}
+% \seclabel{defaults}
+%
+% This is the code that appears in the package itself to set up the
+% default options and mlists.
+%
+% \subsection{Global options}
+% These are inherited by mlists that do not their own respective
+% options. Geared towards \cmd\vect, essentially.
+%    \begin{macrocode}
+\mlistsetup{%
+  sep={,},
+  sepsep={;},
+  wrapcmd=\mlistparen,
+  wrapone={}{},
+  dots=\dots,
+  dot={\,\cdot\,},
+  elemcmd=\mlistelem,
+  headcmd=\mathbf,
+  index={},
+}
+%    \end{macrocode}
+%
+% \subsection{Provided mlists}
+%
+% Redefine these with \cmd\renewmlist\ to effect your own formatting
+% of these mlists. Note that these assume certain global defaults (see
+% above), so some aspects of their formatting can be changed with
+% \cmd\mlistsetup.
+%
+% \begin{macro}{\vect}
+% By default |\vect{V}=\vect{V}{a,b,c}| $\to$ $\vect{V}=\vect{V}{a,b,c}$.
+%    \begin{macrocode}
+\newmlist\vect[  
+  wrapcmd=\mlistparen,
+  wraponecmd=\mlistnowrap,
+  elemcmd=\mlistsub,
+  headcmd=\mathbf,
+]
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\matr}
+% By default |\matr{M}=\matr{M}{a,b;c,d}| $\to$ $\matr{M}=\matr{M}{a,b;c,d}$.
+%    \begin{macrocode}
+\newmlist\matr[
+  sep=&,
+  sepsep=\\,
+  elemcmd=\mlistelem,
+  wrap={\begin{bmatrix}}
+       {\end{bmatrix}},
+]
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\func}
+% By default, |\func{f}=\func{f}{x,y,z}| $\to$ $\func{f}=\func{f}{x,y,z}$.
+%    \begin{macrocode}
+\newmlist\func[
+  headcmd=\mlisthead,
+  elemcmd=\mlistelem,
+  wrapcmd=\mlistheadparen,
+  wraponecmd,
+]
+%    \end{macrocode}
+% \end{macro}
+%
+% \section{Prior art}
+%
+% With \CTAN\ getting so big these days, it's quite necessary to
+% undertake extensive literature reviews before writing your own
+% package. I've been burned before, spending a couple of days playing
+% with ideas and then realising that someone's already done what I wanted.
+% So this time I looked before I jumped.
+%
+% \paragraph{easyvector}
+% The most similar package to this one (that I could find) is
+% \pkg{easyvector}.
+% \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=easyvector|}
+% Superficially, there are a number of similarities, but it didn't
+% quite do what I wanted. Here's an example demonstrating the creation
+% of new vector macros:
+% \begin{example}{}
+% \newvector[Z,\mathbf{Z}]{X}
+% \[ \X = (\X[i,j;k]) \qquad 
+%    \X[1,2,3] \neq \X![1,2,3] \]
+% \end{example}
+%
+% Note that each macro refers only to a single vector element. This is a package
+% to simplify input (and abstract formatting) of vectors with complex notation.
+% \pkg{easyvector} also allows you to customise the form of the
+% vectors it produces, but this is rather inflexible without a good
+% deal of work.
+% \begin{example}{}
+% \def\myindex[#1,#2,#3]{_{#1_{#2}}^{#3}}
+% \newcustomvector[\mathtt{b},\mathbf{b}]{bb}\myindex
+% \[ \bb \qquad \bb[1,2,3] \qquad \bb[3,2,1] \]
+% \end{example}
+%
+% Note also that the main symbol (`$\mathtt{b}$', here) is not
+% available even in this case, so prepended sub-/superscripts are not possible.
+%
+% Has the interesting option to reference matrix row/column sub-vectors: (careful to ensure \cmd\makeatother\ manually)
+% \makeatother
+% \begin{example}{}
+% \newvector(W)[wvec]
+% \[ \wvec = (\wvec[@,j]) \qquad \wvec[a,b;@] \]
+% \end{example}
+% \makeatletter
+%
+% I like this idea of `shorthand' symbols.
+%
+% \paragraph{\pkg{vector}}
+% The package \pkg{vector} 
+%  \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=vector|}
+% provides a few commands for setting vector and matrix symbols, shown in \tabref{vectorpkg}.
+% Just a few basic macros to simplify input, but not really to separate form and content.
+%  
+% \pkg{vector} provided the inspiration to add |\dots| ideas to this package. It also highlights that
+% something specific should be done with accents in general and provide a content macro for unit vectors.
+%
+% \begin{table}
+% \centering
+% \begin{tabular}{@{}ccccccc@{}}
+% \toprule
+% |\bvec| & |\buvec| & |\svec| & |\suvec| & |\uvec| & |\uuvec| & |\irvec| \\
+% \bvec{a} & \buvec{a} & \svec{a} & \suvec{a} & \uvec{a} & \uuvec{a} & \irvec{a} \\
+% \bottomrule
+% \end{tabular}
+% \caption{Commands defined by the \pkg{vector} package. 
+%   \cmd\uvec\ and \cmd\uuvec\ can be configured to produce an under-tilde instead.
+%   \cmd\irvec\ takes an optional argument for `$n$' and can be configured (globally) to begin from a different index.}
+%  \label{tab:vectorpkg}
+% \end{table}
+%
+% \paragraph{hhtensor}
+% The hhtensor package 
+%  \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=hhtensor|}
+% provides a few content-based macros with global options to specify their appearance.
+% \cmd\vec, \cmd\matr\, and \cmd\tens\ are provided for vectors, matrices, and tensors, with
+% mathematical symbols \cmd\dcdot\ to denote double scalar products, and \cmd\trans\ for printing
+% an upright superscript `T' to denote the transpose operator.
+% 
+% This package was the inspiration for pre-defined macros for specific meanings.
+% While I approve of defining the transpose symbol, it's outside the scope of \pkg\jobname.
+%
+% \paragraph{Other tensor packages}
+% There are three main packages for typesetting tensors. 
+% These start to stray from the interest of \pkg\jobname.
+% The relevant packages are 
+% \pkg{tensind},
+%    \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=tensind|}
+% \pkg{tensor},
+%    \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=tensor|}
+% and \pkg{mattens}.
+%    \note{\url|http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=mattens|}
+% Each focuses on typesetting various forms of tensor notation, which differ from what
+% this package is trying to do. Integration between this package and those three above are possible,
+% but has not yet been investigated.
+%
+%\iffalse
+%</defaults>
+%\fi
+%
+% \StopEventually{}
+%
+% \clearpage
+% \part{\pkg{\jobname} implementation}
+%\iffalse
+%<*package>
+%\fi
+%
+% \section{Setup code}
+% This is the package.
+%
+%    \begin{macrocode}
+\ProvidesPackage{mlist}
+  [2007/05/19 v0.4 Typesetting maths lists]
+%    \end{macrocode}
+%
+% \PrintChanges
+% \changes{v0.1}{27/04/2007}{Code tidy up; first decent version.}
+% \changes{v0.2}{30/04/2007}{More documentation; list indexing not finalised.}
+% \changes{v0.3}{2007/05/02}{List indexing decided; empty arguments ignored.}
+%
+% \subsection{User shorthands}
+%
+% For |headcmd|:
+%    \begin{macrocode}
+\let\mlisthead\@firstofone
+%    \end{macrocode}
+% For |elemcmd|:
+%    \begin{macrocode}
+\let\mlistelem\@secondoftwo
+\newcommand\mlistsub  [2]{#1_{#2}}
+\newcommand\mlistsup  [2]{#1^{#2}}
+%    \end{macrocode}
+% For |wrapcmd|:
+%    \begin{macrocode}
+\let\mlistnowrap\@secondoftwo
+\newcommand\mlistparen[2]{\left(#2\right)}
+\newcommand\mlistbrack[2]{\left[#2\right]}
+\newcommand\mlistbrace[2]{\left\{#2\right\}}
+\newcommand\mlistangle[2]{\left<#2\right>}
+\newcommand\mlistheadparen[2]{#1\left(#2\right)}
+\newcommand\mlistheadbrack[2]{#1\left[#2\right]}
+\newcommand\mlistheadbrace[2]{#1\left\{#2\right\}}
+\newcommand\mlistheadangle[2]{#1\left<#2\right>}
+%    \end{macrocode}
+%
+%
+%
+% \subsection{Packages}
+%    \begin{macrocode}
+\RequirePackage{xkeyval,ifmtarg}
+%    \end{macrocode}
+% \subsection{Code we need}
+% More temporary conditionala and counters and things:
+%    \begin{macrocode}
+\unless\ifdefined\if@tempswb\newif\if@tempswb\fi
+\unless\ifdefined\if@tempswc\newif\if@tempswc\fi
+\unless\ifdefined\@tempcntc\newcount\@tempcntc\fi
+\def\@gobblenil#1\@nil{}
+%    \end{macrocode}
+% Some specific things:
+%    \begin{macrocode}
+\newif\if@mlist@warn
+%    \end{macrocode}
+% Semi-colon delimited iteration (adapted from ltx2e).
+%    \begin{macrocode}
+\long\def\@sfor#1:=#2\do#3{%
+  \expandafter\def\expandafter\@sfortmp\expandafter{#2}%
+  \ifx\@sfortmp\@empty\else
+    \expandafter\@sforloop#2;\@nil;\@nil\@@#1{#3}%
+  \fi}
+\long\def\@sforloop#1;#2;#3\@@#4#5{%
+  \def#4{#1}%
+  \ifx #4\@nnil \else
+    #5%
+    \def#4{#2}%
+    \ifx #4\@nnil \else
+      #5%
+      \@siforloop #3\@@#4{#5}%
+    \fi
+  \fi}
+\long\def\@siforloop#1;#2\@@#3#4{%
+  \def#3{#1}%
+  \ifx #3\@nnil
+    \expandafter\@fornoop 
+  \else
+    #4\relax\expandafter\@siforloop
+  \fi
+  #2\@@#3{#4}}
+%    \end{macrocode}
+%
+% ltx3-inspired syntax. \cmd\def@c\ still needs arguments to be supplied to it.
+%    \begin{macrocode}
+\providecommand\let@cc[2]{%
+  \expandafter\let\csname#1\expandafter\endcsname\csname#2\endcsname}
+\providecommand\def@c[1]{%
+  \expandafter\def\csname#1\endcsname}
+\providecommand\def@co[2]{%
+  \def@c{#1\expandafter}\expandafter{#2}}
+%    \end{macrocode}
+% Shorthand to test for optional brace arguments:
+%    \begin{macrocode}
+\newcommand\@ifnextbrace{\expandafter\@ifnextchar\bgroup}
+%    \end{macrocode}
+% Shorthand string definitions for ifx tests:
+%    \begin{macrocode}
+\def\mlist@colon{:}
+\def\mlist@period{.}
+%    \end{macrocode}
+% This is for checking for |@| with an `other' catcode:
+%    \begin{macrocode}
+\makeatother
+\expandafter\def\csname mlist@ampersat\endcsname{@}
+\makeatletter
+%    \end{macrocode}
+% (`Ampersat' is a name for |@| I find amusing. That symbol doesn't seem to
+% have a definitive official name.)
+%
+% \section{keyval options}
+%
+% \begin{macro}{\mlistsetup}
+% \darg{keyval options}
+% User command to set global defaults for mlists.
+%    \begin{macrocode}
+\newcommand\mlistsetup[1]{\setkeys[mlist]{sym}{#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \pkg{xkeyval} makes it easy for us to define a whole slew of options
+% that simply save their argument to a macro.
+%    \begin{macrocode}
+\define@cmdkeys[mlist]{sym}[mlist@]{%
+  symbol,index,sep,sepsep,elem,
+  elemcmd,headcmd,dot,dots} 
+%    \end{macrocode}
+% 
+% \subsection{Wrapping}
+% The wrapcmd options also just save their argument, but wraponecmd
+% takes wrapcmd as a default:
+%    \begin{macrocode}
+\define@key[mlist]{sym}{wrapcmd}{\let\mlist@wrap#1}
+\define@key[mlist]{sym}{wraponecmd}[\mlist@wrap]{\let\mlist@wrapone#1}
+%    \end{macrocode}
+% The wrap and wrapone options need a bit more logic in them:
+%    \begin{macrocode}
+\define@key[mlist]{sym}{wrap}{%
+  \def\mlist@wrap##1##2{\@firstoftwo#1##2\@secondoftwo#1}}
+\define@key[mlist]{sym}{wrapone}[]{%
+  \ifx\relax#1\relax
+    \let\mlist@wrapone\mlist@wrap
+  \else
+    \def\mlist@wrapone##1##2{\@firstoftwo#1##2\@secondoftwo#1}%
+  \fi}
+%    \end{macrocode}
+% 
+% \subsection{Element definition}
+%
+% Takes as input a two dimension list with comma-separated elements
+% and semicolon-separated lists of elements:
+% \codeline |#1| $\to$ |{1,2,3;4,5;6}| .
+%
+% Elements could be numerical or arbitrary \TeX\ code.
+%    \begin{macrocode}
+\define@key[mlist]{sym}{elem}{%
+%    \end{macrocode}
+% It would be easier for all involved if I used specific counters for
+% the following. For now, they're generic and harder to comprehend in
+% six months:
+% \begin{description}[nolistsep]
+% \item[\cmd\@tempcnta] Number of semicolon list.
+% \item[\cmd\@tempcntb] Element number of this comma list.
+% \item[\cmd\@tempcntc] Combined element number.
+% \end{description}
+%    \begin{macrocode}
+  \@tempcnta\z@
+  \@tempcntb\z@
+  \@tempcntc\z@
+%    \end{macrocode}
+% Iterate over every semicolon list.  Set \cs{if@tempswa} true only
+% after every |:| element, for each semicolon list.  Maybe we should
+% use a counter for this, instead?
+%    \begin{macrocode}
+  \@sfor\@jj:=#1\do{%
+    \advance\@tempcnta\@ne
+    \@tempcntb\z@
+    \@tempswafalse
+%    \end{macrocode}
+% Iterate over every comma list:
+%    \begin{macrocode}
+    \@for\@ii:=\@jj\do{%
+%    \end{macrocode}
+% If the element is |:|, set the switch for the next comma-iteration.
+%    \begin{macrocode}
+      \ifx\@ii\mlist@colon
+        \@tempswatrue
+      \else
+%    \end{macrocode}
+% If the previous element was |:|, save the `last' element: (TODO: add
+% error check for too many |:|).  If we've already defined the `last'
+% element and run into |:| again, that means we actually wanted `mid'
+% so make the redefinition. This should only happen once anyway so it
+% can occur every time \cs{if@tempswa} is true.
+%    \begin{macrocode}
+        \if@tempswa
+          \let@cc{mlist@\the\@tempcnta @mid}{mlist@\the\@tempcnta @last}%
+          \def\@tempa{\def@c{mlist@\the\@tempcnta @last}}%
+          \expandafter\@tempa\expandafter{\@ii}%
+        \else        
+%    \end{macrocode}
+% Otherwise, bump up the counters and define the elements. There are
+% two definitions we used for the element indexing. As an example, if 
+% we're up to index $(3,1)$ of a list like $\{a,b,c;d,e;f\}$ then we define
+% \codeline |\mlist@3@1| $\to$ elem $f$ , and
+% \codeline |\mlist@@6| $\to$ elem $f$ . \\
+% (Index $3,1$ is the sixth in the list.) 
+%    \begin{macrocode}
+          \advance\@tempcntb\@ne
+          \advance\@tempcntc\@ne
+          \def@co{mlist@\the\@tempcnta @\the\@tempcntb}{\@ii}%
+          \def@co{mlist@@\the\@tempcntc}{\@ii}%
+        \fi
+      \fi}%
+%    \end{macrocode}
+% If swa is true, we are in an element after a |:|, so turn it off.
+% TODO: I guess no more regular elements can turn up anyway so this is
+% probably overkill!
+%    \begin{macrocode}
+    \if@tempswa\@tempswafalse\fi}}
+%    \end{macrocode}
+% \changes{v0.3}{2007/05/09}{Tidied up the \cmd\MID/\cmd\LAST\ element
+%   stuff a bit.}
+%
+% \subsection{Shorthand definitions}
+%
+% Currently defunct:
+%    \begin{macrocode}
+\define@key[mlist]{sym}{shorthand}{%
+  \mlist@def@shorthand#1%
+  \def@c{mlist@@\@tempa\expandafter}\expandafter{\@tempb}}
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+\def\mlist@def@shorthand#1#{%
+  \def\@tempa{\string#1}
+  \def\@tempb}
+%    \end{macrocode}
+%
+% \section{List indexing}
+%
+% How do I want indexing to work?  Originally, the input was a one
+% dimensional list with the output directly following the indexing:
+% \begin{verbatim}
+% A = {a1,a2,a3,a4}
+% A{1,2;3,4} == {a1,a2;a3,a4}
+% \end{verbatim}
+% I tried a couple of other things, but went back to this idea plus the
+% implicit indexing.
+%
+% \begin{macro}{\@mlist}
+%   \darg{keyval options} 
+%   This is the \cmd\setkeys\ wrapper, which
+%   sets macros for us in various ways depending on how it has been
+%   called and then moves on to do the actual list indexing,
+%   extraction, and typesetting.
+%    \begin{macrocode}
+\newcommand\@mlist[1]{%
+  \begingroup
+  \let\mlist@list@elems\@empty
+  \@tempcnta\@ne
+  \mlist@count
+%    \end{macrocode}
+% The \cmd\setkeys\ code to extract our mlist is flanked by some scary
+% code to protect ourselves inside things like |{array}|
+% environments. Thanks Morten.
+%    \begin{macrocode}
+  \iffalse{\fi\ifnum0=`}\fi
+  \setkeys[mlist]{sym}{#1}%
+  \ifnum0=`{\fi\iffalse}\fi
+%    \end{macrocode}
+% These macros only exist inside an mlist index:
+%    \begin{macrocode}
+  \def\MID{\csname mlist@\the\@tempcnta @mid\endcsname}%
+  \def\LAST{\csname mlist@\the\@tempcnta @last\endcsname}%
+%    \end{macrocode}
+% If there are no optional arguments, typeset the plain vector symbol.
+%    \begin{macrocode}
+  \ifx\@empty\mlist@index\relax
+    \def\mlist@list{\mlist@headcmd{\mlist@symbol}}%
+  \else
+%    \end{macrocode}
+% Otherwise, iterate over every semicolon-separated list.
+%    \begin{macrocode}
+    \@tempcnta\z@
+    \@tempswafalse
+    \@sfor\@jj:=\mlist@index\do{%
+      \let\@jj\@jj
+      \advance\@tempcnta\@ne
+      \mlist@count
+      \expandafter\@ifmtarg\expandafter{\@jj}{}% ignore if empty
+        {\if@tempswa\mlist@add\mlist@sepsep\fi
+         \@tempswatrue}%
+%    \end{macrocode}
+% And (sub-)iterate over every comma-separated list:
+%    \begin{macrocode}
+      \@tempcntb\z@
+      \@tempswbfalse
+      \@for\@ii:=\@jj\do{%
+        \let\@ii\@ii
+        \advance\@tempcntb\@ne
+%    \end{macrocode}
+% Now grab the symbol we're up to.
+% When it's empty:
+%    \begin{macrocode}
+        \expandafter\@ifmtarg\expandafter{\@ii}%
+          {\advance\@tempcntb\m@ne
+           \mlist@add{\@gobble}}
+%    \end{macrocode}
+% When it's not empty:
+%    \begin{macrocode}
+          {\if@tempswb\mlist@add\mlist@sep\fi
+           \@tempswbtrue
+           \ifx\@ii\mlist@colon
+             \mlist@add{\mlist@dots\@gobble}%
+           \else
+             \ifx\@ii\mlist@period
+               \mlist@add{\mlist@dot\@gobble}%
+             \else
+               \mlist@add{\mlist@elemcmd{\mlist@symbol}}%
+             \fi
+           \fi}%
+%    \end{macrocode}
+% Parse the index to see if it's an implicit reference of the form
+% |@|$n$. swc is true if the index is implicit: (and we assume |@|
+% will be only used in an implicit-indexing context. TODO: fix this!)
+%    \begin{macrocode}
+          \mlist@parse@implicit
+          \if@tempswc
+            \mlist@add@ifcs{%
+              mlist@\the\@tempcnta @\expandafter\@gobble\@ii
+            }{\@ii}%
+          \else
+%    \end{macrocode}
+% Because \cmd\@ii, \cmd\@jj\ can contain any possible index that
+% might be passed through the macro, we use eTeX's \cmd\detokenize\ to
+% prevent expansion of any weird argument that might be given.
+%    \begin{macrocode}
+            \mlist@add@ifcs{%
+              mlist@@\expandafter\detokenize\expandafter{\@ii}%
+            }{\@ii}%
+          \fi
+        }%
+%    \end{macrocode}
+% That was the end of comma-separated iteration.
+%    \begin{macrocode}
+      }%
+%    \end{macrocode}
+% That was the end of semicolon-separated iteration.
+%    \begin{macrocode}
+    \def\mlist@list{\mlist@wrap{\mlist@symbol}{\mlist@list@elems}}%
+%    \end{macrocode}
+% If only have a single element:        
+%    \begin{macrocode}
+    \ifnum\@tempcnta=\@ne
+      \ifnum\@tempcntb=\@ne
+        \let\mlist@wrap\mlist@wrapone
+      \fi
+    \fi
+  \fi
+  \mlist@list
+  \endgroup}
+%    \end{macrocode}
+% TODO: move \cmd\mlist@list\ after the endgroup?
+% \changes{v0.4}{2007/05/17}{Eliminated \cmd\global\ no longer
+%   required since I separated the list creation and typesetting.}
+% \changes{v0.4}{2007/05/19}{Simplified `single index' code.}
+% \end{macro}
+%
+% \begin{macro}{\mlist@add}
+% Used in the above to build up the \cmd\mlist@list\ list.
+%    \begin{macrocode}
+\newcommand\mlist@add[1]{%
+  \expandafter\gdef
+  \expandafter\mlist@list@elems
+  \expandafter{\mlist@list@elems#1}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mlist@count}
+%   This macro is used to increment the counter used in
+%   \cmd\MID/\cmd\LAST\ during the actual typesetting of the indexed
+%   elements.
+%    \begin{macrocode}
+\def\mlist@count{%
+  \expandafter\mlist@add
+  \expandafter{%
+  \expandafter\@tempcnta\the\@tempcnta\relax}}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mlist@add@ifcs}
+%   Pretty specific macro to save some repetition.  Uses
+%   \cmd\mlist@add\ to add the first argument as a csname if it
+%   exists, otherwise adds the literal second argument.
+%    \begin{macrocode}
+\newcommand\mlist@add@ifcs[2]{%
+  \ifcsname#1\endcsname
+    \expandafter\@firstoftwo
+  \else
+    \expandafter\@secondoftwo
+  \fi{\expandafter\mlist@add\expandafter{\expandafter{\csname#1\endcsname}}}
+     {\expandafter\mlist@add\expandafter{\expandafter{#2}}}}
+%    \end{macrocode}
+% \end{macro}
+% 
+% \begin{macro}{\mlist@parse@implicit}
+%   Parses the index to see if it's an implicit reference: |@|$n$. The
+%   idea is to expand out the index, set a conditional if the first
+%   char is an |@|, and then gobble up the whole thing. We do this
+%   twice for the two common catcodes that |@| could be.
+%    \begin{macrocode}
+\def\mlist@parse@implicit{%
+  \@tempswcfalse
+  \def\@tempb{%
+    \expandafter\@ifnextchar\mlist@ampersat
+      {\@tempswctrue\@gobblenil}
+      {\@tempswcfalse\@gobblenil}}%
+  \expandafter\@tempb\@ii\@nil
+  \unless\if@tempswc
+    \def\@tempb{%
+      \@ifnextchar @
+        {\@tempswctrue\@gobblenil}
+        {\@tempswcfalse\@gobblenil}}%
+    \expandafter\@tempb\@ii\@nil
+  \fi}
+%    \end{macrocode}
+% \changes{v0.3}{2007/05/09}{Added second check to \cmd\@ifnextchar
+%   |@| for catcode letter.}
+% \end{macro}
+% 
+% \section{List creation}
+%
+% This is the idea behind the user level macros of the package:
+% \begin{verbatim}
+% \newmlist\vect{all-vect-opts}
+% \vect{v}{ind} == \@mlist{symbol={v},all-vect-opts,index={ind}}
+%
+% \newvect\vv{v}[this-v-options]
+% \vv[ind] == \@mlist{symbol={v},all-vect-opts,this-v-options,index={ind}}
+% \end{verbatim}
+%
+% \begin{macro}{\newmlist}
+% \begin{macro}{\renewmlist}
+% \darg{control sequence}
+% \oarg{keyval options}
+%   Things get pretty hairy because I have to do all the optional
+%   argument processing manually. I'd be better off using the
+%   \pkg{suffix} package, but the code works for now. \ltx3 will make
+%   things much easier.
+%    \begin{macrocode}
+\newcommand\newmlist[1]{%
+  \@mlist@warntrue
+  \@ifnextchar[%]
+    {\@defmlist@opt{#1}}
+    {\@defmlist@noopt{#1}}}
+\newcommand\renewmlist[1]{%
+  \@mlist@warnfalse
+  \@ifnextchar[%]
+    {\@defmlist@opt{#1}}
+    {\@defmlist@noopt{#1}}}
+\def\@defmlist@opt#1[#2]{\@defmlist{#1}{#2}}
+\def\@defmlist@noopt#1{\@defmlist{#1}{}}
+%    \end{macrocode}
+% Processing |#1| = thislist-cmd, |#2| = all-thislist-opts
+%    \begin{macrocode}
+\newcommand\@defmlist[2]{%
+  \if@mlist@warn
+    \ifdefined#1
+      \PackageError{mlist}{Command \string#1 already defined}
+        {\string#1 will be overwritten}%
+    \fi
+  \fi
+%    \end{macrocode}
+% Plain usage: (e.g., |\vect{a}{1,2,3}|)
+%    \begin{macrocode}
+  \protected\def#1##1{%
+    \@ifnextbrace
+      {\csname\string#1@opt\endcsname{##1}}
+      {\csname\string#1@noopt\endcsname{##1}}}%
+  \def@c{\string#1@opt}##1##2{%
+    \csname\string#1\endcsname{##1}{##2}}%
+  \def@c{\string#1@noopt}##1{%
+    \csname\string#1\endcsname{##1}{}}%
+  \def@c{\string#1}##1##2{%
+    \@mlist{symbol=##1,#2,index={##2}}}%
+%    \end{macrocode}
+% mlist macro definitions: (e.g., |\newvect{A}[...]|)
+% Processing |##1| = this-sym-cmd, |##2| = symbol, |##3| = this-sym-options
+%    \begin{macrocode}
+  \def@c{new\expandafter\@gobble\string#1}##1##2{%
+    \@mlist@warntrue
+    \@ifnextchar[%]
+      {\csname @new\string#1@opt\endcsname{##1}{##2}}
+      {\csname @new\string#1@noopt\endcsname{##1}{##2}}}%
+  \def@c{renew\expandafter\@gobble\string#1}##1##2{%
+    \@mlist@warnfalse
+    \@ifnextchar[%]
+      {\csname @new\string#1@opt\endcsname{##1}{##2}}
+      {\csname @new\string#1@noopt\endcsname{##1}{##2}}}%
+  \def@c{@new\string#1@opt}##1##2[##3]{%
+    \csname @new\string#1\endcsname{##1}{##2}{##3}}%
+  \def@c{@new\string#1@noopt}##1##2{%
+    \csname @new\string#1\endcsname{##1}{##2}{}}%
+  \def@c{@new\string#1}##1##2##3{%
+    \if@mlist@warn
+      \ifdefined##1
+        \PackageError{mlist}{Command \string##1 already defined}
+          {You cannot overwrite previous definition of \string##1}%
+      \fi
+    \fi
+    \protected\def##1{%
+      \@ifnextbrace
+        {\csname @new\string##1@opt\endcsname}
+        {\@mlist{symbol=##2,#2,##3}}}%
+    \def@c{@new\string##1@opt}####1{%
+      \@mlist{symbol=##2,#2,##3,index={####1}}}}%
+  }
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% 
+% \begin{example}{firstline=2}
+% \raggedright\ttfamily\slshape
+% \def\@mlist#1{MLIST: #1\par}
+% \newmlist\testlist[opt1=one]
+% \newtestlist\testone{S}
+% \testone
+% \testone{1,2,3}
+% \newtestlist\testtwo{T}[opt2=two]
+% \testtwo
+% \testtwo{1,2,3}
+% \end{example}
+%
+%
+%\iffalse
+%</package>
+%\fi
+%
+%
+%\iffalse
+%<*dtx-style>
+%    \begin{macrocode}
+\ProvidesPackage{dtx-style}
+
+\errorcontextlines=999
+
+\def\@dotsep{1000}
+\setcounter{tocdepth}{2}
+\setlength\columnseprule{0.1pt}
+\renewcommand\tableofcontents{\relax
+  \begin{multicols}{2}[\section*{\contentsname}]\small
+    \@starttoc{toc}\relax
+  \end{multicols}}
+
+\setcounter{IndexColumns}{2}
+\renewenvironment{theglossary}
+  {\small\list{}{}
+     \item\relax
+     \glossary@prologue\GlossaryParms 
+     \let\item\@idxitem \ignorespaces 
+     \def\pfill{\hspace*{\fill}}}
+  {\endlist}
+
+\usepackage[svgnames]{xcolor}
+\usepackage{amsmath,array,bm,booktabs,calc,enumitem,fancyvrb,graphicx,ifthen,longtable,refstyle,subfig,topcapt,varioref,\jobname}
+
+\usepackage{easyvector,vector,tensind}
+\usepackage{url}
+
+\usepackage[sc,osf]{mathpazo}
+
+\linespread{1.069}      % A bit more space between lines
+\frenchspacing         % Remove ugly extra space after punctuation
+  
+\definecolor{niceblue}{rgb}{0.2,0.4,0.8}
+\newenvironment{example}[1]
+  {\VerbatimEnvironment
+   \def\Options{#1}%
+   \begin{VerbatimOut}[gobble=2]{\examplefilename}}
+  {\end{VerbatimOut}\relax
+   \typesetexample}
+
+\fvset{formatcom=\color{niceblue}}
+\DefineShortVerb{\|}
+
+\def\theCodelineNo{\textcolor{niceblue}{\sffamily\tiny\arabic{CodelineNo}}}
+
+\let\examplesize\normalsize
+\let\auxwidth\relax
+
+\newlength\examplewidth\newlength\verbatimwidth
+\newlength\exoutdent   \newlength\exverbgap
+\setlength\exverbgap{1em}
+\setlength\exoutdent{-0.15\textwidth}
+\newsavebox\verbatimbox
+\edef\examplefilename{\jobname.example}
+
+\newcommand\typesetexample{\relax
+   \smallskip
+   \noindent
+   \begin{minipage}{\linewidth}
+   \color{niceblue}
+   \hrulefill\par
+   \edef\@tempa{[gobble=0,fontsize=\noexpand\small,\Options]}%
+   \begin{lrbox}{\verbatimbox}\relax
+     \expandafter\BVerbatimInput\@tempa{\examplefilename}%
+   \end{lrbox}
+   \begin{list}{}{\setlength\itemindent{0pt}
+                  \setlength\leftmargin\exoutdent
+                  \setlength\rightmargin{0pt}}\item
+   \ifx\auxwidth\relax
+     \setlength\verbatimwidth{\wd\verbatimbox}%
+   \else
+     \setlength\verbatimwidth{\auxwidth}%
+   \fi
+   \begin{minipage}[c]{\textwidth-\exoutdent-\verbatimwidth-\exverbgap}
+     \catcode`\%=14\centering\linespread{1.6}\input\examplefilename\relax
+   \end{minipage}\hfill
+   \begin{minipage}[c]{\verbatimwidth}
+     \usebox\verbatimbox
+   \end{minipage}
+   \end{list}
+   \par\noindent\hrulefill
+   \end{minipage}
+   \smallskip}
+
+\newcommand*\setverbwidth[1]{\def\auxwidth{#1}}
+
+\newcommand*\name[1]{{#1}}
+\newcommand*\pkg[1]{\textsf{#1}}
+\newcommand*\feat[1]{\texttt{#1}}
+\newcommand*\opt[1]{\texttt{#1}}
+
+\newcommand*\ltx[1]{%
+  \ifx3#1\relax
+    \textsc{ltx3}%
+  \else
+    \LaTeXe
+  \fi}
+
+\newcommand*\note[1]{\unskip\footnote{#1}}
+
+\let\latin\textit
+\def\eg{\latin{e.g.}}
+\def\Eg{\latin{E.g.}}
+\def\ie{\latin{i.e.}}
+\def\etc{\@ifnextchar.{\latin{etc}}{\latin{etc.}\@}}
+
+\def\STIX{\textsc{stix}}
+\def\MacOSX{Mac~OS~X}
+\def\ascii{\textsc{ascii}}
+\def\OMEGA{Omega}
+\def\CTAN{\textsc{ctan}}
+
+\newcounter{argument}
+\g@addto@macro\endmacro{\setcounter{argument}{0}}
+\newcommand*\darg[1]{%
+  \stepcounter{argument}%
+  {\ttfamily\char`\#\theargument~:~}#1\par\noindent\ignorespaces}
+\newcommand*\doarg[1]{%
+  \stepcounter{argument}%
+  {\ttfamily\makebox[0pt][r]{[}\char`\#\theargument]:~}#1\par\noindent\ignorespaces}
+
+\def\codeline{\par\hspace{\parindent}}% two \indents in total
+
+\newcommand\unichar[2]{\textsc{\MakeLowercase{u+#1: #2}}}
+
+\setlength\parindent{2em}
+
+%    \end{macrocode}
+%</dtx-style>
+%\fi
+%
+% \typeout{*************************************************************}
+% \typeout{*}
+% \typeout{* To finish the installation you have to move the following}
+% \typeout{* file into a directory searched by XeTeX:}
+% \typeout{*}
+% \typeout{* \space\space\space unicode-math.sty}
+% \typeout{* \space\space\space unicode-math.tex}
+% \typeout{*}
+% \typeout{*************************************************************}
+%
+\endinput
diff --git a/Master/texmf-dist/source/latex/mlist/mlist.ins b/Master/texmf-dist/source/latex/mlist/mlist.ins
new file mode 100644
index 00000000000..1c92b536d71
--- /dev/null
+++ b/Master/texmf-dist/source/latex/mlist/mlist.ins
@@ -0,0 +1,61 @@
+%%
+%% This is file `mlist.ins',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% mlist.dtx  (with options: `batchfile')
+%% 
+%%   __________________________________
+%%   Copyright (C) 2006  Will Robertson
+%% 
+%%   License information appended.
+%% 
+\input docstrip.tex
+\keepsilent
+\preamble
+
+  __________________________________
+  Copyright (C) 2006  Will Robertson
+
+  License information appended.
+
+\endpreamble
+\postamble
+
+Copyright (C) 2007 by Will Robertson <wspr81@gmail.com>
+
+Distributable under the LaTeX Project Public License,
+version 1.3c or higher (your choice). The latest version of
+this license is at: http://www.latex-project.org/lppl.txt
+
+This work is "maintained" (as per LPPL maintenance status)
+by Will Robertson.
+
+This work consists of the file  \jobname.dtx
+          and the derived files \jobname.sty and \jobname.pdf.
+
+\endpostamble
+\askforoverwritefalse
+\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}
+                              \from{\jobname.dtx}{defaults}}}
+\generate{\file{\jobname.ins}{\from{\jobname.dtx}{batchfile}}}
+\nopreamble\nopostamble
+\generate{\file{README.txt}{\from{\jobname.dtx}{readme}}}
+\generate{\file{dtx-style.sty}{\from{\jobname.dtx}{dtx-style}}}
+\endbatchfile
+%% 
+%% Copyright (C) 2007 by Will Robertson <wspr81@gmail.com>
+%% 
+%% Distributable under the LaTeX Project Public License,
+%% version 1.3c or higher (your choice). The latest version of
+%% this license is at: http://www.latex-project.org/lppl.txt
+%% 
+%% This work is "maintained" (as per LPPL maintenance status)
+%% by Will Robertson.
+%% 
+%% This work consists of the file  mlist.dtx
+%%           and the derived files mlist.sty and mlist.pdf.
+%% 
+%%
+%% End of file `mlist.ins'.
-- 
cgit v1.2.3