From 277ca449c86a187fe858defdcd6aa1830d3b2d0d Mon Sep 17 00:00:00 2001
From: Karl Berry <karl@freefriends.org>
Date: Mon, 19 Jul 2010 23:16:46 +0000
Subject: reinstate stex via new .tds.zip

git-svn-id: svn://tug.org/texlive/trunk@19538 c570f23f-e606-0410-a88d-b1316a301751
---
 .../source/latex/stex/problem/problem.dtx          | 540 +++++++++++++++++++++
 1 file changed, 540 insertions(+)
 create mode 100644 Master/texmf-dist/source/latex/stex/problem/problem.dtx

(limited to 'Master/texmf-dist/source/latex/stex/problem/problem.dtx')

diff --git a/Master/texmf-dist/source/latex/stex/problem/problem.dtx b/Master/texmf-dist/source/latex/stex/problem/problem.dtx
new file mode 100644
index 00000000000..b1103449f1b
--- /dev/null
+++ b/Master/texmf-dist/source/latex/stex/problem/problem.dtx
@@ -0,0 +1,540 @@
+% \iffalse meta-comment
+% An Infrastructure for Problems 
+% $URL: https://svn.kwarc.info/repos/stex-content/sty/problem/problem.dtx $ 
+% $Rev: 2674 $; last modified by $Author: deyan $ 
+% $Date: 2010-03-24 04:09:39 +0100 (Wed, 24 Mar 2010) $
+% Copyright (c) 2006-2008 Michael Kohlhase, all rights reserved
+%               this file is released under the
+%               LaTeX Project Public License (LPPL)
+% \fi
+% 
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{problem}[2010/06/25 v0.9c Semantic Markup for Problems]
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{url,float}
+\usepackage[show]{ed}
+\usepackage{latexml}
+\usepackage[solutions,hints,notes]{problem}
+\usepackage{hyperref}
+\makeindex
+\floatstyle{boxed}
+\newfloat{exfig}{thp}{lop}
+\floatname{exfig}{Example}
+\begin{document}\DocInput{problem.dtx}\end{document}
+%</driver>
+% \fi
+% 
+% \CheckSum{1}
+%
+% \changes{v0.9}{2006/09/18}{First Version with Documentation}
+% \changes{v0.9a}{2007/01/02}{Renamed to \texttt{problem.sty}}
+% \changes{v0.9b}{2008/10/01}{added extraction}
+% \changes{v0.9c}{2010/01/03}{based on \texttt{omd.sty} now}
+% 
+% \GetFileInfo{problem.sty}
+% 
+% \MakeShortVerb{\|}
+%
+% \title{An Infrastructure for formatting Problems\thanks{Version {\fileversion} (last revised
+%        {\filedate})}}
+%    \author{Michael Kohlhase\\
+%            Jacobs University, Bremen\\
+%            \url{http://kwarc.info/kohlhase}}
+% \maketitle
+%
+% \begin{abstract}
+%   The |problem| package supplies an infrastructure that allows specify problems and to
+%   reuse them efficiently in multiple environments.
+% \end{abstract}
+% \setcounter{tocdepth}{2}\tableofcontents\newpage
+%
+%\section{Introduction}\label{sec:intro}
+%
+% The |problem| package supplies an infrastructure that allows specify problem.  Problems
+% are text fragments that come with auxiliary functions: hints, notes, and
+% solutions\footnote{for the momenet multiple choice problems are not supported, but may
+%   well be in a future version}. Furthermore, we can specify how long the solution to a
+% given problem is estimated to take and how many points will be awarded for a perfect
+% solution.
+% 
+% Finally, the |problem| package facilitates the management of problems in small files,
+% so that problems can be re-used in multiple environment. 
+% 
+% \section{The User Interface}\label{sec:ui}
+%
+% \subsection{Package Options}
+% The |problem| package takes the options \DescribeMacro{solutions}|solutions| (should
+% solutions be output?), \DescribeMacro{notes}|notes| (should the problem notes be
+% presented?), \DescribeMacro{hints}|hints| (do we give the hints?),
+% \DescribeMacro{pts}|pts| (do we display the points awarded for solving the problem?),
+% \DescribeMacro{min}|min| (do we display the estimated minutes for problem soling). If
+% theses are specified, then the corresponding auxiliary parts of the problems are output,
+% otherwise, they remain invisible.
+% 
+% The \DescribeMacro{boxed} option specifies that problems should be formatted in framed
+% boxes so that they are more visible in the text. Finally, the \DescribeMacro{test}|test|
+% option signifies that we are in a test sitution, so this option does not show the
+% solutions (of course), but leaves space for the students to solve them.
+% 
+% The \DescribeMacro{extract}|extract| option can be set if we want to extract a problems
+% file, e.g. to display the solutions, see Section~\ref{sec:user:includeproblem} for a
+% discussion.
+% 
+% \subsection{Problems and Solutions}\label{sec:user:probsols}
+%
+% \DescribeEnv{problem} The main enviornment provided by the |problem| package is
+% (surprise surprise) the |problem| environment. It is used to mark up problems and
+% excercises. The environment takes an optional KeyVal argument with the keys
+% \DescribeMacro{id}|id| as an identifier that can be reference later,
+% \DescribeMacro{pts}|pts| for the points to be gained from this exercise in homework or
+% quiz situations, \DescribeMacro{min}|min| for the estimated minutes needed to solve the
+% problem, and finally \DescribeMacro{title}|title| for an informative title of the
+% problem. For an example of a marked up problem see Figure~\ref{fig:problem} and the
+% resulting markup see Figure~\ref{fig:result}. 
+%
+%\begin{exfig}
+% \begin{verbatim}
+% \usepackage[solutions,hints,pts,min]{problem}
+% \begin{document}
+%   \begin{problem}[id=elefants,pts=10,min=2,title=Fitting Elefants]
+%     How many Elefants can you fit into a Volkswagen beetle?
+%     \begin{hint} Think positively, this is simple!\end{hint}
+%     \begin{exnote}Justify your answer\end{exnote}
+%     \begin{solution}[for=elefants,height=3cm]
+%       Four, two in the front seats, and two in the back.
+%     \end{solution}
+%   \end{problem}
+% \end{document}
+% \end{verbatim}
+% \caption{A marked up Problem}\label{fig:problem}
+% \end{exfig}
+%
+% \DescribeEnv{solution} The |solution| environment can be to specify a solution to a
+% problem. If the \DescribeMacro{solutions}|solutions| option is set or |\solutionstrue|
+% is set in the text, then the solution will be presented in the output. The |solution|
+% environment takes an optional KeyVal argument with the keys \DescribeMacro{id}|id| for
+% an identifier that can be reference \DescribeMacro{for}|for| to specify which problem
+% this is a solution for, and \DescribeMacro{height}|height| that allows to specify the
+% amount of space to be left in test situations (i.e. if the \DescribeMacro{test}|test|
+% option is set in the |\usepackage| statement).
+%
+%\begin{exfig}
+% \begin{minipage}{.9\linewidth}
+% \begin{problem}[id=elefants.prob,title=Fitting Elefants]
+%   How many Elefants can you fit into a Volkswagen beetle?
+%   \begin{hint} Think positively, this is simple!\end{hint}
+%   \begin{exnote}Justify your answer\end{exnote}
+%   \begin{solution}%[for=elefants.prob,height=3cm]
+%     Four, two in the front seats, and two in the back.
+%   \end{solution}
+% \end{problem}
+% \end{minipage}
+% \caption{The Formmatted Problem from Figure~\ref{fig:problem}}\label{fig:result}
+% \end{exfig}
+% 
+% \DescribeEnv{hint}\DescribeEnv{note}, the |hint| and |exnote| environments can be used
+% in a |problem| enviroment to give hints and to make notes that elaborate certain aspects
+% of the problem.
+% 
+% \subsection{Including Problems}\label{sec:user:includeproblem}
+% 
+% The \DescribeMacro{\includeproblem}|\includeproblem| macro can be used to include a
+% problem from another file. It takes an optional KeyVal argument and a second argument
+% which is a path to the file containing the problem (the macro assumes that there is only
+% one problem in the include file). The keys \DescribeMacro{title}|title|,
+% \DescribeMacro{min}|min|, and \DescribeMacro{pts}|pts| specify the problem title, the
+% estimated minutes for solving the problem and the points to be gained, and their values
+% (if given) overwrite the ones specified in the |problem| environment in the included
+% file.
+% 
+% Sometimes we want to collect all the included problems into a separate file that can be
+% typeset independently. The main application is to have course notes into which the
+% problems are included (usually in boxed form to distinguish them from the rest of the
+% text and without solutions) and to have the problems with solutions in a separate file
+% (to encourage students to try and solve the problems before looking up solutions). In
+% this situation set the \DescribeMacro{extract}|extract| option on the notes file
+% \meta{notes}|.tex|, which causes a file \meta{notes}|-solutions.tex| to be generated
+% that has the |\includeproblem| statements with the respective numbers from the main
+% document. This can then be imported into a document with the respective front and
+% backmatter. In particular the frontmatter of the importing will ususlly specify the
+% \DescribeMacro{solutions}|solutions| option to generate solutions.
+% 
+% \subsection{Reporting Metadata}\label{sec:user:reporting}
+% 
+% The sum of the points and estimated minutes (that we specified in the |pts| and |min|
+% keys to the |problem| environment or the |\includeproblem| macro) to the log file and
+% the screen after each run. This is useful in preparing exams, where we want to make sure
+% that the students can indeed solve the problems in an alotted time period.
+% 
+% The |\min| and |\pts| macros allow to specify (i.e. to print to the margin) the
+% distribution of time and reward to parts of a problem, if the |pts| and |pts| package
+% options are set. This allows to give students hints about the estimated time and the
+% points to be awarded.
+%
+% \StopEventually{\newpage\PrintChanges}
+% \newpage
+%
+% \section{The Implementation}\label{sec:implementation}
+%
+% \subsection{Package Options}\label{sec:impl:options}
+% 
+% The first step is to declare (a few) package options that handle whether certain
+% information is printed or not. They all come with their own conditionals that are set by
+% the options.
+%
+%    \begin{macrocode}
+%<*package>
+\newif\ifexnotes\exnotesfalse\DeclareOption{notes}{\exnotestrue}
+\newif\ifhints\hintsfalse\DeclareOption{hints}{\hintstrue}
+\newif\ifsolutions\solutionsfalse\DeclareOption{solutions}{\solutionstrue}
+\newif\ifpts\ptsfalse\DeclareOption{pts}{\ptstrue}
+\newif\ifmin\minfalse\DeclareOption{min}{\mintrue}
+\newif\ifboxed\boxedfalse\DeclareOption{boxed}{\boxedtrue}
+\newif\ifextract\extractfalse\DeclareOption{extract}{\extracttrue}
+\ProcessOptions
+%</package>
+%    \end{macrocode}
+%
+% Then we make sure that the necessary packages are loaded (in the right versions).
+%    \begin{macrocode}
+%<*package>
+\RequirePackage{keyval}[1997/11/10]
+\RequirePackage{xcomment}
+\RequirePackage{sref}
+%</package>
+%    \end{macrocode}
+%
+% Here comes the equivalent header information for {\LaTeXML}, we also initialize the
+% package inclusions. Since {\LaTeXML} currently does not process package options, we have
+% nothing to do.
+%    \begin{macrocode}
+%<*ltxml>
+# -*- CPERL -*-
+package LaTeXML::Package::Pool;
+use strict;
+use LaTeXML::Package;
+RequirePackage('sref');
+%</ltxml>
+%    \end{macrocode}
+%
+% Then we register the namespace of the requirements ontology
+%    \begin{macrocode}
+%<*ltxml>
+RegisterNamespace('prob'=>"http://omdoc.org/ontology/problems#");
+RegisterDocumentNamespace('prob'=>"http://omdoc.org/ontology/problems#");
+%</ltxml>
+%    \end{macrocode}
+%
+% \subsection{Problems and Solutions}\label{sec:impl:probsols}
+% 
+% We now prepare the KeyVal support for problems. The key macros just set appropriate
+% internal macros.
+%
+%    \begin{macrocode}
+%<*package>
+\srefaddidkey[prefix=prob.]{problem}
+\omdaddkey{problem}{pts}
+\omdaddkey{problem}{min}
+\omdaddkey{problem}{title}
+\omdaddkey{problem}{refnum}
+%    \end{macrocode}
+%
+% Then we set up a box and a counter for problems
+%
+%    \begin{macrocode}
+\newsavebox{\probbox}
+\newcounter{problem}[section]
+%    \end{macrocode}
+%
+% \begin{macro}{\prob@number}
+%   We consolidate the problem number into a reusable internal macro
+% \begin{macrocode}
+\def\prob@number{\ifx\inclprob@refnum\@empty
+\ifx\problem@refnum\@empty\thesection.\theproblem\else\problem@refnum\fi
+\inclprob@refnum\fi}
+%    \end{macrocode}
+% \end{macro}
+% 
+% We consolidate the problem header line into a separate internal macro that can be reused
+% in various settings.
+%
+% \begin{macro}{\prob@heading}
+%   We consolidate the problem header line into a separate internal macro that can be
+%   reused in various settings.
+% \begin{macrocode}
+\def\prob@heading{Problem \prob@number%
+\ifx\sref@id\@empty\else{\sref@label@id{Problem \thesection.\theproblem}}\fi%
+\ifx\inclprob@title\@empty% if there is no outside title
+\ifx\problem@title\@empty{:\quad}\else{\quad(\problem@title)\hfill\\}\fi
+\else\quad(\inclprob@title)\hfill\\\fi}% else show the outside title
+%    \end{macrocode}
+% \end{macro}
+% 
+% With this in place, we can now define the |problem| environment. It comes in two shapes,
+% depending on whether we are in boxed mode or not. In both cases we increment the problem
+% number and output the points and minutes (depending) on whehter the respective options
+% are set.
+% \begin{environment}{problem}
+%    \begin{macrocode}
+\ifboxed
+\newenvironment{problem}[1][]{\omdsetkeys{problem}{#1}\sref@target%
+\stepcounter{problem}\show@pts\show@min\record@problem%
+\begin{lrbox}{\probbox}\begin{minipage}{.9\textwidth}}
+{\end{minipage}\end{lrbox}
+\setbox0=\hbox{\begin{minipage}{.9\textwidth}%
+\noindent\textbf\prob@heading\rm%
+\end{minipage}}
+\smallskip\noindent\fbox{\vbox{\box0\vspace*{.2em}\usebox\probbox}}\smallskip}
+\else
+\newenvironment{problem}[1][]{\omdsetkeys{problem}{#1}\sref@target%
+\stepcounter{problem}\show@pts\show@min\record@problem%
+\par\noindent\textbf\prob@heading\rm}
+{\smallskip}
+\fi%boxed
+%</package>
+%    \end{macrocode}
+% \end{environment}
+% 
+% Note that we allow hints and solutions in the body of a |problem| environment so we have
+% to allow the |omdoc:CMP| and |omdoc:p| elements to autoclose. 
+%
+%    \begin{macrocode}
+%<*ltxml>
+DefCMPEnvironment('{problem} OptionalKeyVals:problem',
+     "<omdoc:exercise ?&KeyVal(#1,'id')(xml:id='&KeyVal(#1,'id')')()"
+    .  "prob:dummy='for the namespace'"
+    .   "?#locator(stex:srcref='#locator')()>"
+    .    "?&KeyVal(#1,'title')(<dc:title ?#locator(stex:srcref='#locator')()>&KeyVal(#1,'title')</dc:title>)()"
+    .    "?&KeyVal(#1,'min')(<omdoc:meta property='prob:solvedinminutes' "
+    .       "?#locator(stex:srcref='#locator')()>&KeyVal(#1,'min')</omdoc:meta>)()"
+    .    "?&KeyVal(#1,'pts')(<omdoc:meta property='prob:points' "
+    .       "?#locator(stex:srcref='#locator')()>&KeyVal(#1,'pts')</omdoc:meta>)()"
+    .   "<omdoc:CMP ?#locator(stex:srcref='#locator')()><omdoc:p>#body"
+    ."</omdoc:exercise>\n");
+%</ltxml>
+%    \end{macrocode}
+%
+% \begin{macro}{\record@problem}
+%   This macro records information about the problems in the |*.aux| file. 
+%    \begin{macrocode}
+%<*package>
+\def\record@problem{\protected@write\@auxout{}%
+{\string\@problem{\prob@number}%
+{\ifx\inclprob@pts\@empty\problem@pts\else\inclprob@pts\fi}%
+{\ifx\inclprob@min\@empty\problem@min\else\inclprob@min\fi}}}
+%</package>
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@problem}
+%   This macro acts on a problem's record in the |*.aux| file. It does not have any
+%   functionality here, but can be redefined elsewhere (e.g. in the |assignment|
+%   package). 
+%    \begin{macrocode}
+%<*package>
+\def\@problem#1#2#3{}
+%</package>
+%    \end{macrocode}
+% \end{macro}
+% 
+% The |solution| environment is similar to the |problem| environment, only that it is
+% independent of the boxed mode. It also has it's own keys that we need to define first.
+% 
+%    \begin{macrocode}
+%<*package>
+\define@key{soln}{id}{\def\soln@id{#1}}
+\define@key{soln}{for}{\def\soln@for{#1}}
+\define@key{soln}{height}{\def\soln@height{#1}}
+\ifsolutions
+\newenvironment{solution}[1][]%
+{\hrule\smallskip{\bf Solution: }\begin{small}}%
+{\hrule\end{small}}
+\else\newxcomment[]{solution}\fi
+% \newsavebox{\solution@box}
+% \newlength{\solution@width}
+% \setlength{\solution@width}{14cm}
+% \newenvironment{solution}[1][]%
+% {\begin{lrbox}{\solution@box}\begin{minipage}{\solution@width}
+% \hrule\smallskip{\bf Solution: }\small}
+% {\smallskip\hrule\end{minipage}\end{lrbox}
+% \ifsolutions\begin{center}\usebox{\solution@box}\end{center}\fi}
+%</package>
+%<*ltxml>
+DefKeyVal('soln','id','Semiverbatim');
+DefKeyVal('soln','height','Semiverbatim');
+DefKeyVal('soln','for','Semiverbatim');
+DefCMPEnvironment('{solution} OptionalKeyVals:soln',
+	       "<omdoc:solution ?&KeyVals(#1,'for')(for='&KeyVal(#1,'for')')() ?#locator(stex:srcref='#locator')()>"
+	     . "#body"
+	     . "</omdoc:solution>");
+%</ltxml>
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+%<*package>
+\ifexnotes
+\newenvironment{exnote}[1][]%
+{\par\noindent\hrule\smallskip{\bf Note: }\small}
+{\smallskip\hrule}
+\else%ifexnotes
+\newxcomment[]{exnote}
+\fi%ifexnotes
+\ifhints
+\newenvironment{hint}[1][]%
+{\par\noindent\hrule\smallskip{\bf Hint: }\small}
+{\smallskip\hrule}
+\else%ifhints
+\newxcomment[]{hint}
+\fi%ifhints
+%</package>
+%<*ltxml>
+DefCMPEnvironment('{exnote}',
+   "<omdoc:hint ?#locator(stex:srcref='#locator')()>"
+  .  "<omdoc:CMP ?#locator(stex:srcref='#locator')()>"
+  .    "<omdoc:p>#body<omdoc:p>"
+  .  "</omdoc:CMP>"
+  ."</omdoc:hint>");
+DefCMPEnvironment('{hint}',
+   "<omdoc:hint ?#locator(stex:srcref='#locator')()>"
+  .  "<omdoc:CMP ?#locator(stex:srcref='#locator')()>"
+  .    "<omdoc:p>#body</omdoc:p>"
+  .  "</omdoc:CMP>"
+  ."</omdoc:hint>");
+DefConstructor('\pts{}',"");
+DefConstructor('\min{}',"");
+%</ltxml>
+%    \end{macrocode}
+% 
+% \subsection{Including Problems}\label{sec:impl:includeproblem}
+%
+% The first action is to make a \meta{jobname}|-problems.tex| file, if the |extract|
+% option is set.
+% 
+%    \begin{macrocode}
+%<*package>
+\ifextract
+\newwrite\problem@file
+\immediate\openout\problem@file=\jobname-problems.tex
+\AtEndDocument{\closeout\problem@file}
+\fi
+%</package>
+%    \end{macrocode}
+%
+% \begin{macro}{\includeproblem}
+%   The |\includeproblem| command is essentially a glorified |\input| statement, it sets
+%   some internal macros first that overwrite the local points. After that (so that the
+%   included problem had time to step the problem number) it writes the |\includeproblem|
+%   statement to the problems file, if the |extract| option is set. Here we add a key
+%   |refnum=\prob@num| to the inlcudeproblem, so that we can remember the number from the
+%   main document.\ednote{do something about the overwriting of problem metadata in the
+%     {\LaTeXML} binding.}
+% 
+%    \begin{macrocode}
+%<*package>
+\omdaddkey{inclprob}{pts}
+\omdaddkey{inclprob}{min}
+\omdaddkey{inclprob}{title}
+\omdaddkey{inclprob}{refnum}
+\clear@inclprob@keys
+\newcommand{\includeproblem}[2][]{%
+\bgroup\omdsetkeys{inclprob}{#1}\input{#2}\ifsolutions\newpage\fi\egroup
+\ifextract\def\@test{#1}
+\def\prob@num{\ifx\inclprob@refnum\@empty\thesection.\theproblem\else\inclprob@refnum\fi}
+\def\inclprob@keys{#1\ifx\@test\@empty\else,\fi refnum=\prob@num}
+\protected@write\problem@file{}{\string\includeproblem[\inclprob@keys]{#2}}
+\fi}
+%</package>
+%<*ltxml>
+DefKeyVal('prob','pts','Semiverbatim');
+DefKeyVal('prob','min','Semiverbatim');
+DefKeyVal('prob','title','Semiverbatim');
+DefConstructor('\includeproblem OptionalKeyVals:prob Semiverbatim',
+   "<omdoc:ref xref='#2' ?#locator(stex:srcref='#locator')() "
+  .     "prob:dummy='for the namespace'>"
+  .  "?&KeyVal(#1,'title')(<dc:title ?#locator(stex:srcref='#locator')()>&KeyVal(#1,'title')</dc:title>)()"
+  .  "?&KeyVal(#1,'min')(<omdoc:meta property='prob:solvedinminutes' "
+  .     "?#locator(stex:srcref='#locator')()>&KeyVal(#1,'min')</omdoc:meta>)()"
+  .  "?&KeyVal(#1,'pts')(<omdoc:meta property='prob:points' "
+  .     "?#locator(stex:srcref='#locator')()>&KeyVal(#1,'pts')</omdoc:meta>)()"
+  ."</omdoc:ref>");
+%</ltxml>
+%    \end{macrocode}
+% \end{macro}
+%
+%    \begin{macrocode}
+%<*ltxml>
+Tag('omdoc:exercise',afterOpen=>\&numberIt);
+Tag('omdoc:solution',afterOpen=>\&numberIt);
+Tag('omdoc:hint',afterOpen=>\&numberIt);
+%</ltxml>
+%    \end{macrocode}
+%
+% \subsection{Reporting Metadata}
+%
+%    \begin{macrocode}
+%<*package>
+\def\pts#1{\ifpts\marginpar{#1 pt}\fi}
+\def\min#1{\ifmin\marginpar{#1 min}\fi}
+%</package>
+%<*ltxml>
+%</ltxml>
+%    \end{macrocode}
+%
+%    \begin{macrocode}
+%<*package>
+\AtEndDocument{\ifpts\message{Total: \arabic{pts} points}\fi
+\ifmin\message{Total: \arabic{min} minutes}\fi}
+%</package>
+%<*ltxml>
+%</ltxml>
+%    \end{macrocode}
+%
+% \begin{macro}{\show@pts}
+%   The |\show@pts| shows the points: if no points are given from the outside and also no
+%   points are given locally do nothing, else show and add. If there are outside points
+%   then we show them in the margin.
+%    \begin{macrocode}
+%<*package>
+\newcounter{pts}
+\def\show@pts{\ifx\inclprob@pts\@empty% 
+\ifx\problem@pts\@empty\else%
+\ifpts\marginpar{\problem@pts pt\smallskip}\addtocounter{pts}{\problem@pts}\fi%
+\fi\else%
+\ifpts\marginpar{\inclprob@pts pt\smallskip}\addtocounter{pts}{\inclprob@pts}\fi%
+\fi}
+%    \end{macrocode}
+% \end{macro}
+% and now the same for the minutes
+% \begin{macro}{\show@min}
+%    \begin{macrocode}
+\newcounter{min}
+\def\show@min{\ifx\inclprob@min\@empty%
+\ifx\problem@min\@empty\else%
+\ifmin\marginpar{\problem@min min}\addtocounter{min}{\problem@min}\fi%
+\fi\else%
+\ifmin\marginpar{\inclprob@min min}\addtocounter{min}{\inclprob@min}\fi
+\fi}
+%</package>
+%    \end{macrocode}
+% \end{macro}
+% 
+% \subsection{Finale}
+% Finally, we need to terminate the file with a success mark for perl.
+%    \begin{macrocode}
+%<ltxml>1;
+%    \end{macrocode}
+% \Finale
+\endinput
+
+% \iffalse
+% LocalWords:  GPL structuresharing STR dtx pts keyval xcomment CPERL DefKeyVal
+%%% Local Variables: 
+%%% mode: doctex
+%%% TeX-master: t
+%%% End: 
+% \fi
+% LocalWords:  RequirePackage Semiverbatim DefEnvironment OptionalKeyVals soln
+% LocalWords:  exnote DefConstructor inclprob
-- 
cgit v1.2.3

