From 29d823f65d5adbee3d5264332ad893be27323983 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Sun, 11 Jul 2010 16:41:22 +0000 Subject: imakeidx 1.0 (9jul10) git-svn-id: svn://tug.org/texlive/trunk@19375 c570f23f-e606-0410-a88d-b1316a301751 --- .../texmf-dist/source/latex/imakeidx/imakeidx.dtx | 1157 ++++++++++++++++++++ 1 file changed, 1157 insertions(+) create mode 100644 Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx (limited to 'Master/texmf-dist/source/latex/imakeidx') diff --git a/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx b/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx new file mode 100644 index 00000000000..ac1ee776d09 --- /dev/null +++ b/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx @@ -0,0 +1,1157 @@ +% \iffalse +%<*internal> +\begingroup +\input docstrip.tex +\keepsilent +\usedir{tex/latex/imakeidx} +\preamble + ______________________________________________________ + The imakeidx package for LaTeX + Copyright (C) 2010 Claudio Beccari and Enrico Gregorio + All rights reserved + + License information appended + +\endpreamble +\postamble + +Copyright 2010 Claudio Beccari +Copyright 2010 Enrico Gregorio + +Distributable under the LaTeX Project Public License, +version 1.3c or higher (your choice). The latest version of +this license is at: http://www.latex-project.org/lppl.txt + +This work is "author-maintained" + +This work consists of this file imakeidx.dtx, a README file +and the derived files imakeidx.sty and imakeidx.pdf. + +\endpostamble +\askforoverwritefalse + +\generate{\file{imakeidx.sty}{\from{imakeidx.dtx}{package}}} + +\def\tmpa{plain} +\ifx\tmpa\fmtname\endgroup\expandafter\bye\fi +\endgroup +% +% +%<*driver> +\ProvidesFile{imakeidx.dtx}% +% +%\NeedsTeXFormat{LaTeX2e}[2005/12/01] +%\ProvidesPackage{imakeidx}% +%<*package> + [2010/07/09 v.1.0 Package for typesetting indices in a synchronous mode] +% +%<*driver> +\documentclass{ltxdoc} +\def\prog#1{\textsf{\slshape#1}} +\def\progpdflatex{\textsf{(\textsl{pdf})\textsl{latex}}} +\def\eTeX{\mbox{$\varepsilon$-\TeX}} +\def\Kvalue#1{\textsf{\textsl{#1}}} +\def\pack#1{\textsf{#1}} +\usepackage{multicol} +\usepackage[T1]{fontenc} +\usepackage[latin1]{inputenc} +\usepackage[english]{babel} +\usepackage{textcomp,lmodern,metalogo,booktabs} +\begin{document} +\makeatletter +\GetFileInfo{imakeidx.dtx}% dtx extension required +\title{Package \pack{imakeidx}\thanks{Version number \fileversion; last + revision \filedate.}} +\author{Claudio Beccari\thanks{\texttt{claudio dot beccari at gmail dot it}} + \and Enrico Gregorio\thanks{\texttt{Enrico dot Gregorio at univr dot it}}} +\date{} +\maketitle +\begin{multicols}{2} +\tableofcontents +\end{multicols} +\smallskip +\DocInput{imakeidx.dtx} +\end{document} +% +% \fi +% \CheckSum{733} +% +% \begin{abstract} +% This package exploits the |\write18| facility of modern \TeX\ system +% distributions that allows to run system commands while typesetting a +% document written with the \LaTeX{} mark up. By so doing, the index +% or indices, that are usually typeset at the very end of the +% document, are possibly split and sorted so as to include them in the +% document itself. This process has some minor limitations: it's +% impossible to start an index before all other pages have been +% ejected and to have the automatic run of the index sorting program. +% \end{abstract} +% +% \section{Introduction} +% It's been some years now that the typesetting engine of the \TeX\ +% system is just \prog{pdftex}; the original Knuthian \prog{tex} is +% still corrected by D.\,E.~Knuth himself, but is frozen, according to +% his will; it is still distributed by every \TeX\ distribution, but +% in practice only \prog{pdftex} is used as the interpreter of every +% macro package and the true typesetter engine. The latter is updated +% with the original \prog{tex} corrections, but it is the only one +% that the \LaTeX3 Team maintains and upgrades. +% +% This program \prog{pdftex} was originally born with the facility of +% producing either a pdf output file, as its name suggests, or a dvi +% file. Since then it has been enriched with many upgrades, also with +% regard to the evolution of the PDF language itself. It also +% incorporates the extensions of \eTeX\ and has the ability to open a +% shell so as to call system commands with their arguments. +% +% This facility, since the \TeX~Live 2010 distribution, is official, +% but is sort of restricted, in the sense that the \TeX\ system +% configuration file contains a list of ``safe'' system commands that +% can be run by \prog{pdftex}; presently the only program relevant for +% this package is \prog{makeindex}. This precaution is necessary in +% order to avoid running malicious code. Other programs can be run, +% though, but it's necessary to expressly tell \prog{pdftex} that it +% can do so; this authorisation is given by means of a suitable +% program option, as explained below. +% +% This package will exploit this facility in order to run a perl +% script that is capable of splitting a raw index file into different +% chunks and to run the \prog{makeindex} \TeX\ system program so as to +% sort and format the index entries according to a specified index +% style file. Once the shell is terminated, the \prog{pdftex} program +% resumes its work and possibly prints the various formatted indices +% produced in previous step. In this way the document indices are +% always synchronous with their document and no further \prog{pdftex} +% runs are necessary. +% +% In order to reach this goal, it necessary to enable the +% \prog{pdftex} engine to run the so-called |\write18| facility; +% depending on the distribution and the shell editor that is being +% used to work on a specific document, it is necessary to add +% \texttt{-shell-escape} (or \texttt{-\/-enable-write18} for MiK\TeX) +% to the command with which \prog{pdftex} is launched, possibly by the +% shell editor. If Lua\LaTeX{} is used, it's necessary to specify the +% \texttt{-shell-escape} command line option. +% +%\section{Package usage} +% This package is invoked as usual by means of a \cs{usepackage} command: +% \begin{flushleft} +% \cs{usepackage}\oarg{options}\texttt{\{imakeidx\}} +% \end{flushleft} +% +% The available \meta{options} consist in a comma separated list of +% the following options: +% \begin{description}\def\Item[#1]{\item[\normalfont\ttfamily#1]} +% \Item[makeindex] in order to use the \prog{makeindex} sorting an +% formatting engine; this option is the default and is mutually +% exclusive with the next option. +% \Item[xindy] in order to use the \prog{xindy} sorting and formatting +% engine; \texttt{texindy} is an alias for \texttt{xindy} and actually +% it's the script \prog{texindy} which is called by this package. +% \Item[noautomatic] disables the automatic splitting and running of +% the system programs; this option might be used to save time when one +% knows for sure that the index files are already OK and do not need +% to be refreshed. Actually the time spent in splitting, sorting and +% formatting is so short that this option might be useful only when +% very lengthy indices are being processed. +% \Item[nonewpage] inhibits the new page command to be issued when +% using an article type document class and multiple indices are being +% typeset. We don't see why someone would use multiple indices in an +% article (except possibly for package documentations, which usually +% provide a macro index and a list of changes). +% \Item[quiet] suppresses all messages about manual index +% processing. +% \Item[original] uses the class provided \texttt{theindex} +% environment for typesetting the indices; it is implicitly set if the +% document class option \texttt{twocolumn} has been specified. +% \Item[splitindex] calls the \prog{splitindex} script by Markus Kohm, +% which is included in every \TeX~Live distribution since 2009. With +% this option all index entries, which are written in one raw file, +% are successively split into all the requested index files; in this +% way there is virtually no limit on the number of indices that is +% possible to create for a particular document. +% \end{description} +% +% The last described option deserves an explanation. \LaTeX{} can +% write on a limited number of files during a run, and some of these +% \emph{output streams} are already reserved (among these: aux file, +% table of contents, list of figures, list of tables). When more than +% one index is produced, there's the risk to run off the number of +% writable files, because normally \pack{imakeidx} reserves an output +% stream for each index. So the \texttt{splitindex} option comes to +% rescue: with it only \emph{one} index file is written. At the +% first \cs{printindex} command, the program \prog{splitindex} is +% called; it splits the large index file into as many parts as the +% number of requested indices; after this, \prog{makeindex} (or +% \prog{xindy}) can do its job. In this way only one output stream is +% needed during the \LaTeX{} run. +% +% When should you apply this option, then? With one index it's +% useless, you should begin to consider it for two or more indices and +% definitely use it if you get the error +% \begin{verbatim} +% ! No room for a new \write +% \end{verbatim} +% Apart from this case, with or without it the results are the +% same. See section~\ref{sec:wrong} to see what files are written +% during the \LaTeX{} run with or without the option. +% +% \section{Specific package commands} +% \addtocontents{toc}{\protect\columnbreak\protect\vspace*{.4ex}} +% As it is customary when just one index is produced, the standard +% \LaTeX\ facilities, i.e.\ the commands \cs{makeindex}, \cs{index}, +% and \cs{printindex} must be used. This package redefines them so as +% to produce multiple indices and defines some others. The first three +% of the following commands may be used only in the preamble. +% \begin{description}\def\Item[#1]{\item[\normalfont\ttfamily\cs{#1}]} +% \Item[makeindex] with the syntax:\\[1ex] +% \cs{makeindex}\oarg{key-values}\\[1ex] +% where \meta{key-values} is a comma separated list of key-value +% assignments of the form: \texttt{key=value}; the available +% keys are the following: +% \begin{description}\def\Item[#1]{\item[\normalfont\sffamily\textsl{#1}]} +% \Item[name] is the symbolic name for an index; if this key is not +% specified, it defaults to the value of the \cs{jobname} control +% sequence, in other words the name of the current main \texttt{.tex} +% program file, i.e., the file that |\input|s and/or |\include|s all +% the files of the complete document. This symbolic name is necessary +% only when doing multiple indices and is used with the \cs{index} +% command to point to the right index.\\* +% Example: \texttt{name=nameidx} +% \Item[title] is the title that is typeset at the beginning of the +% specific index; if not specified, the \cs{indexname} value is +% used.\\* Example: \texttt{title=Index of names} +% \Item[program] is the name of the system program that is used to +% sort and format an index; valid choices are \prog{makeindex}, +% \prog{xindy}, or \prog{texindy}. If not specified the program +% specified among the package options is used. If no option is +% specified, \prog{makeindex} is used. In order to use \prog{xindy}, +% it's necessary to call \progpdflatex{} with the shell escape +% command line option.\\* Example: \texttt{program=xindy} +% \Item[options] is the list of options to be passed to the sorting +% and formatting program; this list is a balanced text of program +% options, separated with the syntax required by the sorting and +% formatting program. For example, in order to use a different +% \prog{makeindex} sorting and formatting style \pack{mystyle.ist} and +% avoiding any message in the screen output write \texttt{options=-s +% mystyle} +% \Item[noautomatic] is a boolean key that defaults to \texttt{false}; +% you can set it to \texttt{true} by simply listing its key in the +% key-value list, without necessarily specifying the \texttt{=true} +% part. If specified the index sorting program won't be called during +% the \prog{pdftex} run for this particular index. +% \Item[intoc] is a boolean variable that defaults to \texttt{false}; +% if you want to set it \texttt{true} you must simply list this key in +% the key-value list, with no need of specifying the \texttt{=true} +% part. By setting this key to \texttt{true} an entry for this +% particular index is put in the table of contents. +% \Item[columns] accepts an integer representing the number of columns +% in the index; this is silently ignored if the \texttt{original} or +% the \texttt{twocolumn} options are set; the number can even +% be~$1$.\\* Example: \texttt{columns=3} +% \Item[columnsep] accepts a dimension representing the separation +% between index columns; the default is $35$\,pt as in the standard +% classes.\\* Example: \texttt{columnsep=15pt} +% \Item[columnseprule] is boolean; if it is set, a rule will appear +% between the index columns. +% \end{description} +% \Item[indexsetup] with the syntax:\\[1ex] +% \cs{indexsetup}\oarg{key-values}\\[1ex] +% where again \meta{key-values} is a comma separated list of key-value +% assignments; the available keys are: +% \begin{description}\def\Item[#1]{\item[\normalfont\sffamily\textsl{#1}]} +% \Item[level] which takes as value a sectioning command such as +% \cs{chapter} or \cs{chapter*}. Actually any command with an argument +% will do and will receive the index title as its argument. The +% default is \cs{chapter*} or, if the class doesn't provide chapters, +% \cs{section*}. +% \Item[toclevel] which takes as value a sectioning command +% \emph{name} such as \texttt{section} to indicate the level at which +% we want the indices appear in the table of contents. +% \Item[noclearpage] is a boolean option; when set, no \cs{clearpage} +% will be issued between indices. You might want to set it in order to +% have a `chapter of indices'; in this case you are responsible for +% setting the right value of the above keys. For example +%\begin{verbatim} +% \indexsetup{level=\section*,toclevel=section,noclearpage} +% ... +% \chapter*{Indices} +% \printindex +% \printindex[names] +% \printindex[objects] +%\end{verbatim} +% \Item[firstpagestyle] which takes as value a page style, default +% \texttt{plain}. You might want to set it to \texttt{empty} or some +% other page style defined by the class or by yourselves. +% \Item[headers] which takes as value the left and right marks. You +% might want to use this for disabling automatic uppercasing, by +% saying |headers={\indexname}{\indexname}|; notice that this value +% should always be a pair of braced texts. +% \Item[othercode] which takes as value arbitrary \TeX{} code that +% will be executed at the beginning of index entries typesetting. For +% example you might want to change here the setting of \cs{parskip}. +% \end{description} +% \Item[splitindexoptions] must have as its argument the command line +% option to \prog{splitindex}; this might be necessary on some +% systems. The default is |-m ""|, because we want it only for +% splitting the large index file into its components which are later +% processed by this package. +% \Item[index] with the syntax:\\[1ex] +% \cs{index}\oarg{name}\marg{entry}\\[1ex] +% inserts \meta{entry} into the raw index file; upon splitting it in +% different files, this particular entry is listed in the specific +% index file with name \meta{name}; if no name is specified, this +% \meta{entry} is added to the default index with name +% \cs{jobname}. The \meta{entry} should be written according to the +% particular syntax of the sorting and formatting program. +% \Item[indexprologue] with the syntax:\\*[1ex] +% \cs{indexprologue}\oarg{spacing}\marg{text}\\[1ex] +% is used to define some text to go between the index header and the +% entries; the \meta{spacing} should be a vertical space command such +% as |\vspace{36pt}| (default is \cs{bigskip}), controlling the +% spacing between the prologue and the index proper. The command +% affects only the next index produced by \cs{printindex}. +% \Item[printindex] with the syntax:\\*[1ex] +% \cs{printindex}\oarg{name}\\[1ex] +% is used to typeset the particular index named \meta{name}; if no +% optional argument is specified, the default index with name +% \cs{jobname.ind} is typeset. Actually this command activates all +% the mechanism of closing the output to the raw index file, shelling +% out, possibly calling the \prog{splitindex} script in order to +% divide the single raw file generated by \progpdflatex{} into +% distinct raw files according to the default or specified +% \meta{name}s for each index, calling the sorting and +% formatting program on each of these split raw files (unless +% inhibited by a \Kvalue{noautomatic} option; in which case a warning +% is issued in order to remember the typesetter that this particular +% index has not been processed), producing the sorted and formatted +% \texttt{.ind} files, and eventually inputs and typesets these +% formatted files. \ Deep breath. +% \end{description} +% +% Let's see an example. The sequence of commands +%\begin{verbatim} +% ... +% \usepackage{imakeidx} +% ... +% \makeindex[title=Concept index] +% \makeindex[name=persons,title=Index of names,columns=3] +% ... +% \begin{document} +% ... +% And this is the end of the story. +% +% \printindex +% +% \indexprologue{\small In this index you'll find only +% famous people's names} +% \printindex[persons] +% \end{document} +%\end{verbatim} +% will produce two indices. Entries for the first one must be typed as +% |\index{gnu}|, while entries for the second are of the form +% |\index[persons]{Lamport, Leslie}|. The prologue will be printed +% (full line) only in the ``Index of names'', which will be typeset in +% three columns. +% +% When the \texttt{original} option is set, maybe implicitly because +% of \texttt{twocolumn}, \cs{indexsetup} and the keys +% \Kvalue{columns}, \Kvalue{columnsep} and \Kvalue{columnseprule} for +% \cs{makeindex} have no effect. +% +% \section{If something goes wrong}\label{sec:wrong} +% Since \pack{imakeidx} relies on good cooperation between package +% options and command line options for the \LaTeX{} run, in some cases +% it may happen that the indices are not correctly built or built at +% all. +% +% If you use only \prog{makeindex} and \TeX~Live 2010 or later, then +% you shouldn't need anything special, since \prog{makeindex} is among +% the safe programs allowed to be called during a \LaTeX{} run, be it +% \prog{latex}, \prog{pdflatex} or \prog{xelatex} (or even +% \prog{lualatex}, at present with some glitches). When the options +% \texttt{splitindex}, \texttt{xindy} or \texttt{texindy} are +% specified (globally or locally), the \LaTeX{} run should be called +% with \texttt{-shell-escape} (which is \texttt{--enable-write18} for +% MiK\TeX) or the \texttt{noautomatic} option should be specified when +% loading \pack{imakeidx}. +% +% Let's look at a couple of examples. In both we suppose that the +% document \texttt{mybook.tex} defines two indices through +%\begin{verbatim} +% \makeindex[...] +% \makeindex[name=secondary,...] +%\end{verbatim} +% where |...| denotes possible options excluding \texttt{name}. +% +% First of all we examine the case when \pack{imakeidx} is called +% \emph{without} \texttt{splitindex}. Two files called +% \texttt{mybook.idx} and \texttt{secondary.idx} will be written +% during the \LaTeX{} run. At the corresponding \cs{printindex} +% command, \prog{makeindex} will act on each of them producing the files +% \texttt{mybook.ind}, \texttt{mybook.ilg}, \texttt{secondary.ind} and +% \texttt{secondary.ilg}. The \texttt{.ind} files contain the relevant +% \texttt{theindex} environment with alphabetized entries, while in +% the \texttt{.ilg} files \prog{makeindex} will write its log. You can +% check in \texttt{mybook.log} whether the \prog{makeindex} run has +% been executed by searching for a line +%\begin{verbatim} +% runsystem(makeindex <...>)...executed +%\end{verbatim} +% where |<...>| stands for the rest of the command line in the +% particular case. If this line is not present, then \prog{makeindex} +% has not been called; this happens when you didn't specify the shell +% escape command line option for the \LaTeX{} run or if you set the +% \texttt{noautomatic} option for the index. +% +% When using \prog{splitindex}, the situation is different. During the +% \LaTeX{} run, only a large index file called \texttt{mybook.idx} file +% gets written; the first \cs{printindex} command will call +% \prog{splitindex} (shell escape \emph{must} be active), which will +% produce the two partial index files \texttt{mybook-mybook.idx} and +% \texttt{mybook-secondary.idx}. These two files will be processed by +% \prog{makeindex} producing the four files +% \texttt{mybook-mybook.ind}, \texttt{mybook-mybook.ilg}, +% \texttt{mybook-secondary.ind} and \texttt{mybook-secondary.ilg}. +% The line +%\begin{verbatim} +% runsystem(splitindex <...>)...executed +%\end{verbatim} +% in \texttt{mybook.log} will tell that the splitting has been done +% (see later on if this doesn't seem true). In table~\ref{tab:files} you +% can see what files are produced when the first two lines are in the +% preamble. +% \begin{table}[tp] +% \centering\begingroup\ttfamily +% \begin{tabular}{rll} +% \toprule +% \multicolumn{3}{c}{\ttfamily\cs{makeindex}\hphantom{[name=secondary]}}\\ +% \multicolumn{3}{c}{\ttfamily\cs{makeindex}[name=secondary]}\\ +% \midrule +% \addlinespace +% &\normalfont without \texttt{splitindex} & +% \normalfont with \texttt{splitindex} \\ +% \cmidrule(lr){2-2} \cmidrule(lr){3-3} +% \addlinespace +% \normalfont(at \cs{begin}\texttt{\{document\}})\\ +% \addlinespace +% &mybook.idx & mybook.idx \\ +% &secondary.idx \\ +% \addlinespace +% \normalfont(at \cs{printindex})\\ +% \addlinespace +% &mybook.ind & mybook-mybook.idx \\ +% &mybook.ilg & mybook-secondary.idx\\ +% &secondary.ind & mybook-mybook.ind\\ +% &secondary.ilg & mybook-mybook.ilg\\ +% & & mybook-secondary.ind \\ +% & & mybook-secondary.ilg \\ +% \bottomrule +% \end{tabular}\endgroup +% \caption{Files written during a \LaTeX{} run}\label{tab:files} +% \end{table} +% +% Everything is the same when using \prog{texindy} for alphabetizing, +% except that, by default, it doesn't write \texttt{.ilg} files. If +% you want them, add |options=-t|\meta{name}|.ilg| to the relevant +% \cs{makeindex} command, in our example it should be +%\begin{verbatim} +% \makeindex[...,options=-t mybook.ilg] +% \makeindex[name=secondary,...,options=-t secondary.ilg] +%\end{verbatim} +% The name of the \texttt{.ilg} file \emph{must} be specified. +% Remember, though, that \prog{xindy} \texttt{.ilg} files may turn out +% to be very large. +% +% When something different from expected appears to take place, check +% also the time stamps of the produced files; if they are older than +% \texttt{mybook.log}, it means that they have not been written in the +% last run. The most common case is that you forgot to activate the shell +% escape feature (which is not necessary with \TeX~Live 2010 or later, +% provided you use only \prog{makeindex}). +% +% Another cause of malfunction might be a wrong option passed to +% \prog{makeindex}, \prog{texindy} or \prog{splitindex}. For example, +% if you specify a style option for \prog{makeindex} such as +% |options=-s mystyle.ist| and the style file is missing or its name +% is mistyped, the run of \prog{makeindex} will result in +% \texttt{mybook.log}, but it will be aborted and the \TeX{} program +% has no control over this process. In this case the \texttt{.ilg} and +% \texttt{.ind} files will not be produced and you can spot the +% problem by checking the time stamps. On some systems a message such as +%\begin{verbatim} +% Index file mystyle.ist not found +% Usage: makeindex [-ilqrcgLT] [-s sty] [-o ind] [-t log] [-p num] +%\end{verbatim} +% may appear on the screen, but often this window gets closed before +% you realize you have a problem. The time stamp is the best clue to +% detect such problems. +% +% Shell hackers may be able to redirect the \texttt{stderr} stream to +% a file, but this requires skills that can't be explained here, +% because they require tens of different tricks, depending on what +% method is used to start a \LaTeX{} run. From the command line, +% assuming \prog{bash}, it would be something like +%\begin{verbatim} +% pdflatex -shell-escape mybook.tex 2>latex-errors +%\end{verbatim} +% If shell hackers know a way to access the exit status of the called +% program, we'd be glad to implement a supplementary check. +% +% \section{Hints} +% Actually this package reaches two goals: (\textit{a})~it typesets +% the indices of a specific document in just one run, and +% (\textit{b})~it lets the author\slash typesetter produce +% documents with multiple indices. +% +% If you redefine yourself the \texttt{theindex} environment, please +% remember not to number the chapter or section that introduces the +% index if you ask for the \Kvalue{intoc} option; either use the +% commands \cs{chapter*} or the \cs{section*} respectively and the +% \Kvalue{intoc} option or don't use this option and redefine your +% \texttt{theindex} environment with numbered chapter or section +% commands, that will put the index titles directly into the table of +% contents. You may use the \pack{idxlayout} package by Thomas Titz, +% which offers many functions for index typesetting customization and +% is compatible with our package; remember to load \pack{idxlayout} +% after \pack{imakeidx}. This package has a similar function to our +% \cs{indexprologue}, called \cs{setindexprenote}; however +% \pack{idxlayout} doesn't reset the index prologue, which must be +% declared anew or disabled with \cs{noindexprenote} before the next +% \cs{printindex} command. +% +% If by chance you get double entries into the table of contents, +% eliminate the \Kvalue{intoc} option from your calls; your class and +% packages are already taking care of it. The package \pack{tocbibind} +% should be loaded with the \texttt{noindex} option, otherwise it +% would interfere with our redefinition of \texttt{theindex}. +% +% If you redefine your \texttt{theindex} environment by means of other +% packages, pay attention that these redefine a real \texttt{theindex} +% environment with this very name; if they create an environment with +% a different name, \pack{imakeidx} can't take care of the indices +% production (in particular the \TeX\ system program \prog{makeindex} +% creates a sorted and formatted \texttt{.ind} file that refers +% explicitly to the \texttt{theindex} environment), and it can't take +% care of the table of contents entry and of the position of the hyper +% link anchor needed to navigate your document by means of hyper +% links. +% +% Use freely the options and the key values in order to reach the +% desired results, but you are advised to prepare in advance the +% styles for composing the various indices in a proper way; for +% example, if you use a titled style for the index, where the index +% sections are distinguished with a bold face title or alphabetic +% letter, you have to set up a \texttt{.ist} file, such as +% \texttt{myindexstyle.ist}, made up like this: +%\begin{verbatim} +% headings_flag 1 +% heading_prefix "\\par\\penalty-50\\textbf{" +% heading_suffix "}\\\\\*\~\\\\\*" +% symhead_positive "Symbols" +% symhead_negative "symbols" +% numhead_positive "Numbers" +% numhead_negative "numbers" +% delim_0 ",\~" +%\end{verbatim} +% where the numeric and non alphabetic entries have different +% titles. But, say, you are making also an index where the entries are +% file names, and for some names only the extension is entered; the +% extensions start with a dot, so the sorting program will sort these +% names at the beginning of the sorted index file, but you won't like +% to have +% a title such as ``Symbols''; you probably prefer to have a title +% such as ``Extensions''; therefore you have to prepare a different +% index style file, such as this one: +%\begin{verbatim} +% headings_flag 1 +% heading_prefix "\\par\\penalty-50\\textbf{" +% heading_suffix "}\\\\\*\~\\\\\*" +% symhead_positive "Extensions" +% symhead_negative "extensions" +% numhead_positive "Numbers" +% numhead_negative "numbers" +% delim_0 ",\~" +%\end{verbatim} +% +% This done, besides requiring the use of this package, you have to +% declare the \cs{makeindex} command with the necessary options; pay a +% particular attention to the options that involve the index symbolic +% name, the index title, the index style, the fact that the index +% titles shall appear in the table of contents, and if you are +% preparing an e-book, you probably would like to hyper link both the +% page numbers and the index titles to the proper locations. +% \prog{pdflatex} will do everything for you but be careful not to +% confuse it with illogical index entries. +% +% Especially with multiple indices it is important that you are +% consistent in putting the right information in the right index and +% with a consistent mark-up. Define yourself appropriate macros so +% that, for example, personal names are consistently typeset, say, in +% caps and small caps and are entered into a specific index; you may +% even create one command to typeset the name in the document and +% replicate the same name in the index. +% +% Of course there is no program that can decide at your place what and +% where to index each piece of information; this is a task for +% humans. Soooooo\dots +% \begin{center} HAPPY \TeX{}ING!\end{center} +% +% \StopEventually{} +% \section{Implementation} +% The heading to the file is in common with the documentation file, +% and has already been taken care of. But we require the +% \pack{xkeyval} package, in order to handle the key-value lists. +% +% Notice that in order to create e specific name space such as to +% avoid possible conflicts with other packages, all the commands +% defined in this package are prefixed with the string \texttt{imki@}. +% \begin{macrocode} +\RequirePackage{xkeyval} +% \end{macrocode} +% +% We define the various options and their defaults. After +% \cs{ProcessOptions}, we set anyway the \texttt{original} option if +% the document class has been given the \texttt{twocolumn} option, +% which is incompatible with \pack{multicol}. We define also an +% internal alias for |\immediate\write18|, a rudimentary check for the +% typesetting engine and a macro for modifying the command line call +% to \prog{splitindex}. Lua\TeX{} is recognized later by the +% value~$255$ to the internal parameter \cs{imki@shellescape}. +% \begin{macrocode} +\DeclareOption{xindy}{\def\imki@progdefault{texindy}} +\DeclareOption{texindy}{\def\imki@progdefault{texindy}} +\DeclareOption{makeindex}{\def\imki@progdefault{makeindex}} +\newif\ifimki@disableautomatic +\DeclareOption{noautomatic}{\imki@disableautomatictrue} +\newif\ifimki@nonewpage +\DeclareOption{nonewpage}{% + \imki@nonewpagetrue\imki@disableautomatictrue +} +\newif\ifimki@splitindex +\DeclareOption{splitindex}{\imki@splitindextrue} +\newif\ifimki@original +\DeclareOption{original}{\imki@originaltrue} +\DeclareOption{quiet}{\AtEndOfPackage{% + \let\imki@finalmessage\@gobble + \let\imki@splitindexmessage\relax}} +\ExecuteOptions{makeindex} +\ProcessOptions\relax + +\if@twocolumn\imki@originaltrue\fi +\def\imki@exec{\immediate\write18} +\def\imki@engine{(pdf)latex} +\ifdefined\XeTeXversion\def\imki@engine{xelatex}\fi +\ifdefined\directlua % luatex doesn't have \(pdf)shellescape + \def\imki@engine{lualatex}\chardef\imki@shellescape\@cclv +\fi +\edef\imki@splitindexoptions{-m \string"\string"} +\def\splitindexoptions#1{\g@addto@macro\imki@splitindexoptions{ #1}} +\@onlypreamble\splitindexoptions +% \end{macrocode} +% +% ^^A A - incompatibilities and emulation +% +% While experimenting we found out that some classes or packages are +% either incompatible with this one, or must be faked in order to +% pretend they have been loaded. +% +% Unfortunately there is a serious incompatibility with the +% \pack{memoir} class. In facts \pack{memoir} puts all index entries +% in the main \texttt{.aux} file and extracts them to the various raw +% index files at |\end{document}| time. This means that no raw index +% file output stream has been defined, and therefore this package +% can't close it; moreover it can't typeset the indices before +% |\end{document}| because they are not yet available. Therefore if +% this one is the active class chosen for typesetting the whole +% document, this package outputs an error message and exits. +% \begin{macrocode} +\@ifclassloaded{memoir}{% + \PackageError{imakeidx}{Incompatible package won't be loaded} + {This package is incompatible with memoir, sorry}\endinput}{} +% \end{macrocode} +% On the opposite we pretend that package \pack{makeidx} or package +% \pack{multind} have been loaded, so that \pack{hyperref} can play +% with their commands, that are substantially the same as those used +% here. By so doing those packages are inhibited from being loaded +% after this one. +% \begin{macrocode} +\@namedef{ver@makeidx.sty}{3000/12/31} +\@ifpackageloaded{multind} + {\PackageError{imakeidx}{Incompatible package `multind' loaded} + {This package is incompatible with multind, don't load both.% + \MessageBreak\@ehc}} + {\@namedef{ver@multind.sty}{3000/12/31}} +% \end{macrocode} +% At the same time we redefine some commands defined by \pack{makeidx} +% and we define the default English names for the \cs{see} and +% \cs{seealso} commands. We use \cs{providecommand} so that, if +% \pack{makeidx} has already been loaded, we do not redefine things +% that have already been defined. +% \begin{macrocode} +\providecommand*\see[2]{\emph{\seename} #1} +\providecommand*\seealso[2]{\emph{\alsoname} #1} +\providecommand*\seename{see} +\providecommand*\alsoname{see also} +% \end{macrocode} +% +% ^^A C - \makeindex +% +% From here on, some commands are duplicated; this depends on the +% fact that the behavior must be different when using \prog{splitindex} or +% not. The memory occupied by the useless commands will be cleared at the +% end of package. +% \begin{macrocode} +\providecommand*\makeindex{} % to use \renewcommand safely +\renewcommand{\makeindex}[1][]{\imki@makeindex{#1}} +% \@onlypreamble\makeindex % Already in latex.ltx +% \end{macrocode} +% This package implementation of \cs{makeindex} sets default values +% for the keys, then evaluates its argument (which is the optional +% argument to \cs{makeindex}) and calls two other macros. After that +% we have to reset the defaults. +% \begin{macrocode} +\def\imki@makeindex#1{% + \def\imki@name{\jobname}% + \def\imki@title{\indexname}% + \edef\imki@program{\imki@progdefault}% + \let\imki@options\space + \KV@imki@noautomaticfalse\KV@imki@intocfalse + \setkeys{imki}{#1}% + \ifimki@splitindex\KV@imki@noautomaticfalse\fi + \imki@build\imki@name + \imki@startidx\imki@name + \imki@resetdefaults +} +% \end{macrocode} +% +% Here are the keys. As usual, the \texttt{imki} prefix is used to +% distinguish anything that is being defined in this package, even the +% keys. +% \begin{macrocode} +\define@key{imki}{name}{\def\imki@name{#1}} +\define@key{imki}{title}{\def\imki@title{#1}} +\define@choicekey{imki}{program}[\imki@val\imki@nr] + {makeindex,xindy,texindy}{% + \ifcase\imki@nr\relax + \def\imki@program{makeindex}% + \or + \def\imki@program{texindy}% + \or + \def\imki@program{texindy}% + \fi} +\define@key{imki}{options}{\def\imki@options{ #1 }} +\define@boolkey{imki}{noautomatic}[true]{} +\define@boolkey{imki}{intoc}[true]{} +\define@key{imki}{columns}{\def\imki@columns{#1}} +\define@key{imki}{columnsep}{\def\imki@columnsep{#1}} +\define@boolkey{imki}{columnseprule}[true]{} +\def\imki@resetdefaults{% + \def\imki@options{ }% + \def\imki@columns{2}\def\imki@columnsep{35\p@}% + \KV@imki@columnseprulefalse + \KV@imki@intocfalse\KV@imki@noautomaticfalse} +\imki@resetdefaults +% \end{macrocode} +% +% The control sequence \cs{imki@build} defines a control sequence to +% hold the setup for an index to be used when the index is sorted and +% printed +% \begin{macrocode} +\def\imki@build#1{% + \toks@{}% + \imki@dokey\imki@title + \imki@dokey\imki@program + \imki@dokey\imki@options + \imki@dokey\imki@columns + \imki@dokey\imki@columnsep + \ifKV@imki@noautomatic + \addto@hook\toks@{\KV@imki@noautomatictrue}% + \else + \addto@hook\toks@{\KV@imki@noautomaticfalse}% + \fi + \ifKV@imki@intoc + \addto@hook\toks@{\KV@imki@intoctrue}% + \else + \addto@hook\toks@{\KV@imki@intocfalse}% + \fi + \ifKV@imki@columnseprule + \addto@hook\toks@{\KV@imki@columnsepruletrue}% + \else + \addto@hook\toks@{\KV@imki@columnseprulefalse}% + \fi + \expandafter\edef\csname imki@set@#1\endcsname{\the\toks@}% +} +% \end{macrocode} +% Comand \cs{imki@dokey} receives as argument the text of the values +% assigned to certain keys, and adds them to the options token list. +% \begin{macrocode} +\def\imki@dokey#1{% + \expandafter\addto@hook\expandafter\toks@\expandafter{% + \expandafter\def\expandafter#1\expandafter{#1}}} +% \end{macrocode} +% +% Command \cs{imki@startidx} defines the output stream(s); the macro +% with suffix \texttt{split} is used when \Kvalue{splitindex} is not +% enabled, the one with suffix \texttt{unique} is used otherwise. In +% the case of many indices, the symbolic name for an index named +% `pippo' is \cs{pippo@idxfile} corresponding to the file +% \texttt{pippo.idx}. When \Kvalue{splitindex} is enabled, the only +% output stream is called \cs{@indexfile} as in standard \LaTeX, +% corresponding to \cs{jobname.idx}. +% \begin{macrocode} +\def\imki@startidxsplit#1{% + \if@filesw + \def\index{\@bsphack + \@ifnextchar [{\@index}{\@index[\jobname]}} + \expandafter\newwrite\csname #1@idxfile\endcsname + \immediate\openout \csname #1@idxfile\endcsname #1.idx\relax + \typeout{Writing index file #1.idx}% + \fi} +% \end{macrocode} +% We define a switch which is set to true when a \cs{makeindex} command is given: +% with \Kvalue{splitindex} we open only one stream. +% \begin{macrocode} +\newif\ifimki@startedidx +\def\imki@startidxunique#1{% + \if@filesw + \ifimki@startedidx\else + \newwrite\@indexfile + \immediate\openout\@indexfile\jobname.idx% + \global\imki@startedidxtrue + \fi + \def\index{\@bsphack + \@ifnextchar [{\@index}{\@index[\jobname]}} + \expandafter\let\csname #1@idxfile\endcsname\@empty + \typeout{Started index file #1}% + \fi} +% \end{macrocode} +% +% ^^A D - \index +% +% Provide a default definition for \cs{index}; when a \cs{makeindex} +% command is given and \LaTeX\ is writing on auxiliary files, +% \cs{index} will be redefined, as seen before. When index files are +% written, \cs{index} always calls \cs{@index}. Some code is borrowed +% from \pack{memoir.cls}, but heavily modified. We want \cs{@wrindex} +% to be defined with two arguments, so that \pack{hyperref} can hook +% into it just like it does with the similar commands defined by the +% old packages \pack{multind} and \pack{index}. +% \begin{macrocode} +\renewcommand{\index}[2][]{\@bsphack\@esphack} +\def\@index[#1]{% + \@ifundefined{#1@idxfile}% + {\PackageWarning{imakeidx}{Undefined index file `#1'}% + \begingroup + \@sanitize + \imki@nowrindex}% + {\edef\@idxfile{#1}% + \begingroup + \@sanitize + \@wrindex\@idxfile}} +\def\imki@nowrindex#1{\endgroup\@esphack} +% \end{macrocode} +% +% Command \cs{@wrindex} must be duplicated; we have to call it the +% same as usual in order to support \pack{hyperref}. But the real name +% will be given at the end. +% \begin{macrocode} +\def\imki@wrindexsplit#1#2{% + \expandafter\protected@write\csname#1@idxfile\endcsname{}% + {\string\indexentry{#2}{\thepage}}% + \endgroup + \@esphack} +\def\imki@wrindexunique#1#2{% + \protected@write\@indexfile{}% + {\string\indexentry[#1]{#2}{\thepage}}% + \endgroup + \@esphack} +% \end{macrocode} +% +% ^^A E - \printindex +% +% Compilation of the indices is disabled if \texttt{-shell-escape} has +% not been given or the restricted mode is not active; in this case we +% emit a warning. \XeTeX{} has \cs{shellescape} instead of +% \cs{pdfshellescape}, so we take care of this (hoping that users or +% packages don't define a \cs{shellescape} command). In any case we +% define an internal version of this command. In the case of +% \prog{luatex} we can't emit the proper messages and hope that Heiko +% Oberdiek will update \pack{pdftexcmds}; for the moment we set +% \cs{imki@shellescape} to~$1$. The conditional +% \cs{ifKV@imki@noautomatic} is defined by \cs{define@boolkey} above. +% +% \begin{macrocode} +\def\imki@shellwarn{} +\ifdefined\imki@shellescape % luatex >= 0.60 + \chardef\imki@shellescape=\@ne +% \RequirePackage{pdftexcmds}% +% \chardef\imki@shellescape=\pdf@shellescape +\else + \@ifundefined{shellescape} + {\let\imki@shellescape\pdfshellescape} + {\let\imki@shellescape\shellescape} +\fi +\ifnum\imki@shellescape=\z@ + \let\KV@imki@noautomaticfalse\KV@imki@noautomatictrue + \KV@imki@noautomatictrue + \def\imki@shellwarn{\MessageBreak or call \imki@engine\space with + -shell-escape} +\fi +% \end{macrocode} +% Do the same if \Kvalue{noautomatic} has been given as an option. +% \begin{macrocode} +\ifimki@disableautomatic + \let\KV@imki@noautomaticfalse\KV@imki@noautomatictrue + \KV@imki@noautomatictrue +\fi +% \end{macrocode} +% +% Now we set up the \texttt{theindex} environment. If the +% \texttt{original} option is set, we simply patch the class +% definition in order to call the macro that does the work related to +% the table of contents. Otherwise we define a new \texttt{theindex} +% environment, based on the standard, but using, if the number of +% columns is greater than one, the \texttt{multicols} environment. +% Users needing a different setup can use the \cs{indexsetup} command. +% \begin{macrocode} +\ifimki@original + \expandafter\def\expandafter\theindex\expandafter{\expandafter + \imki@maybeaddtotoc\theindex} +\else + \RequirePackage{multicol} + \renewenvironment{theindex} + {\imki@maybeaddtotoc + \imki@indexlevel{\indexname}\imki@indexheaders + \thispagestyle{\imki@firstpagestyle}% + \ifnum\imki@columns>\@ne + \columnsep \imki@columnsep + \ifx\imki@nextidxprologue\relax + \begin{multicols}{\imki@columns} + \else + \begin{multicols}{\imki@columns}[\imki@idxprologue] + \fi + \else + \imki@idxprologue + \fi + \global\let\imki@idxprologue\relax + \parindent\z@ + \parskip\z@ \@plus .3\p@\relax + \columnseprule \ifKV@imki@columnseprule.4\p@\else\z@\fi + \raggedright + \let\item\@idxitem + \imki@othercode} + {\ifnum\imki@columns>\@ne\end{multicols}\fi +% \clearpage +} +\fi +% \end{macrocode} +% +% The command \cs{indexsetup} may be used to customize some aspects of +% index formatting. +% \begin{macrocode} +\def\imki@indexlevel{% + \@ifundefined{chapter}{\section}{\chapter}*} +\define@key{imkiindex}{level}{\def\imki@indexlevel{#1}} +\def\imki@toclevel{% + \@ifundefined{chapter}{section}{chapter}} +\define@key{imkiindex}{toclevel}{\def\imki@toclevel{#1}} +\define@boolkey{imkiindex}{noclearpage}[true]{\let\imki@clearpage\relax} +\def\imki@indexheaders{% + \@mkboth{\MakeUppercase\indexname}{\MakeUppercase\indexname}} +\define@key{imkiindex}{headers}{\def\imki@indexheaders{\markboth#1}} +\def\imki@firstpagestyle{plain} +\define@key{imkiindex}{firstpagestyle}{\def\imki@firstpagestyle{#1}} +\let\imki@othercode\relax +\define@key{imkiindex}{othercode}{\def\imki@othercode{#1}} +\newcommand{\indexsetup}[1]{% + \ifimki@original\else\setkeys{imkiindex}{#1}\fi} +\@onlypreamble\indexsetup +% \end{macrocode} +% +% The command \cs{indexprologue} sets the internal version which is +% always \cs{let} to \cs{relax} during |\begin{theindex}|. +% \begin{macrocode} +\newcommand{\indexprologue}[2][\bigskip]{% + \long\gdef\imki@idxprologue{{#2\par}#1}} +% \end{macrocode} +% +% Now we provide the relevant \cs{printindex} macros by transferring +% the real job to a secondary macro \cs{imki@putindex} after due +% checks and messages. +% \begin{macrocode} +\providecommand*{\printindex}{} +\renewcommand*{\printindex}[1][\jobname]{% + \@ifundefined{#1@idxfile}{\imki@error{#1}}{\imki@putindex{#1}}} + +\def\imki@error#1{% + \def\@tempa{#1}\def\@tempb{\jobname}% + \ifx\@tempa\@tempb + \let\imki@optarg\@empty + \else + \def\imki@optarg{[#1]}% + \fi + \PackageError{imakeidx} + {Misplaced \protect\printindex\imki@optarg} + {You are not making this index, as no appropriate + \protect\makeindex\MessageBreak + command has been issued in the preamble.}} +% \end{macrocode} +% +% We define a command to do a \cs{cleardoublepage} if the option +% \Kvalue{openright} holds (in classes where \Kvalue{twoside} is +% meaningful). In case \cs{chapter} is defined but not +% \cs{if@openright}, we assume that the class wants ``open right''. +% \begin{macrocode} +\def\imki@clearpage{% + \@ifundefined{chapter} + {\clearpage} % article and similar classes + {\@ifundefined{if@openright} + {\cleardoublepage} + {\if@openright + \cleardoublepage + \else + \clearpage + \fi} + }} +% \end{macrocode} +% +% We need a helper macro to do a check in order to avoid a loop and +% the hook where to insert the table of contents related stuff. +% \begin{macrocode} +\def\imki@check@indexname{\indexname} +\providecommand*\imki@maybeaddtotoc{} +% \end{macrocode} +% Two helper macros for preparing the final messages to the user. +% \begin{macrocode} +\def\imki@finalmessage#1{% + \expandafter\edef\csname imki@message#1\endcsname + {\imki@program\imki@options#1.idx} + \AtEndDocument{\PackageWarning{imakeidx}{% + Remember to run \imki@engine\space again after calling\MessageBreak + `\@nameuse{imki@message#1}'\imki@shellwarn\@gobble}}} +\def\imki@splitindexmessage{% + \AtEndDocument{\PackageWarningNoLine{imakeidx}{% + Remember to run \imki@engine\space again after calling\MessageBreak + `splitindex' and processing the indices\imki@shellwarn}}} +% \end{macrocode} +% +% Here is a helper macro for deciding whether to call the external +% utility or to issue a final message. In \cs{imki@makeindexname} we +% put the name of the only program allowed by default +% (\prog{makeindex}). If the list is updated, we can supplement the +% list here, maybe defining a list macro; for now this is +% sufficient. The temporary switch \cs{if@tempswa} is set to true if +% automatic processing is possible, so that the main macro can take +% the appropriate action. +% \begin{macrocode} +\def\imki@makeindexname{makeindex} +\def\imki@decide{% + \@tempswafalse + \ifimki@splitindex % splitindex is not "safe" + \ifnum\imki@shellescape=\@ne\@tempswatrue\fi + \else + \ifx\imki@program\imki@makeindexname % nor is texindy + \ifnum\imki@shellescape=\tw@\@tempswatrue\fi + \fi + \ifnum\imki@shellescape=\@ne\@tempswatrue\fi + \fi + \ifKV@imki@noautomatic + \@tempswafalse + \fi} +% \end{macrocode} +% We now define the main macro that puts the specified index file into +% the document and possibly orders to add the index title to the +% table of contents. It is duplicated as usual. The argument |#1| is +% the specific symbolic name of the index. In particular if the +% \Kvalue{intoc} option has been specified, the hook +% \cs{imki@maybeaddtotoc} is defined in such a way that the relevant +% information is added to the \texttt{toc} file. The +% \cs{phantomsection} command is necessary when using \pack{hyperref}; +% here it is hidden as argument to \cs{@nameuse}, so it is equivalent +% to \cs{relax} and does nothing if \pack{hyperref} has not been +% loaded. +% \begin{macrocode} +\def\imki@putindexsplit#1{% + \ifimki@nonewpage\else + \imki@clearpage + \fi + \immediate\closeout\csname #1@idxfile\endcsname + \let\imki@indexname\indexname % keep \indexname + \@nameuse{imki@set@#1}\imki@decide + \if@tempswa % we can call the external program + \imki@exec{\imki@program\imki@options#1.idx}% + \else + \imki@finalmessage{#1}% + \fi + \ifKV@imki@intoc + \def\imki@maybeaddtotoc{\@nameuse{phantomsection}% + \addcontentsline{toc}{\imki@toclevel}{\imki@title}}% + \else + \def\imki@maybeaddtotoc{}% + \fi + \ifx\imki@title\imki@check@indexname\else + \def\indexname{\imki@title}% + \fi + \@input@{#1.ind} + \let\indexname\imki@indexname % restore \indexname +} + +\newif\ifimki@splitdone +\def\imki@putindexunique#1{% + \ifimki@nonewpage\else + \imki@clearpage + \fi + \let\imki@indexname\indexname % keep \indexname + \@nameuse{imki@set@#1}\imki@decide + \if@tempswa % we can call the external program + \ifimki@splitdone\else + \immediate\closeout\@indexfile + \imki@exec{splitindex \imki@splitindexoptions\space\jobname.idx}% + \global\imki@splitdonetrue + \fi + \else + \ifimki@splitdone\else + \imki@splitindexmessage\global\imki@splitdonetrue + \fi + \fi + \if@tempswa % we can call the external program + \imki@exec{\imki@program\imki@options\jobname-#1.idx}% + \fi + \ifKV@imki@intoc + \def\imki@maybeaddtotoc{\@nameuse{phantomsection}% + \addcontentsline{toc}{\imki@toclevel}{\imki@title}}% + \else + \def\imki@maybeaddtotoc{}% + \fi + \ifx\imki@title\imki@check@indexname\else + \def\indexname{\imki@title}% + \fi + \@input@{\jobname-#1.ind} + \let\indexname\imki@indexname % restore \indexname +} +% \end{macrocode} +% +% ^^A F - Final decisions +% +% At this point, we choose the meaning of the relevant commands, +% reclaiming the space occupied by the discarded ones +% \begin{macrocode} +\ifimki@splitindex + \let\imki@startidx\imki@startidxunique + \let\@wrindex\imki@wrindexunique + \let\imki@putindex\imki@putindexunique + \let\imki@startidxsplit\@undefined + \let\imki@wrindexsplit\@undefined + \let\imki@putindexsplit\@undefined +\else + \let\imki@startidx\imki@startidxsplit + \let\@wrindex\imki@wrindexsplit + \let\imki@putindex\imki@putindexsplit + \let\imki@startidxunique\@undefined + \let\imki@wrindexunique\@undefined + \let\imki@putindexunique\@undefined +\fi +% \end{macrocode} +% The end. +% \Finale -- cgit v1.2.3