From a1e6a7b727e6acf25eeacbacc20345b721b416c4 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Thu, 16 Dec 2021 21:25:06 +0000 Subject: texlogsieve (16dec21) git-svn-id: svn://tug.org/texlive/trunk@61328 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/scripts/texlogsieve/texlogsieve | 4022 +++++++++++++++++++++ 1 file changed, 4022 insertions(+) create mode 100755 Master/texmf-dist/scripts/texlogsieve/texlogsieve (limited to 'Master/texmf-dist/scripts') diff --git a/Master/texmf-dist/scripts/texlogsieve/texlogsieve b/Master/texmf-dist/scripts/texlogsieve/texlogsieve new file mode 100755 index 00000000000..699bfa972da --- /dev/null +++ b/Master/texmf-dist/scripts/texlogsieve/texlogsieve @@ -0,0 +1,4022 @@ +#!/usr/bin/env texlua + +-- texlogsieve - filter and summarize LaTeX log files +-- +-- Copyright (C) 2021 Nelson Lago +-- +-- This program is free software: you can redistribute it and/or modify +-- it under the terms of the GNU General Public License as published by +-- the Free Software Foundation, either version 3 of the License, or +-- (at your option) any later version. +-- +-- This program is distributed in the hope that it will be useful, +-- but WITHOUT ANY WARRANTY; without even the implied warranty of +-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-- GNU General Public License for more details. +-- +-- You should have received a copy of the GNU General Public License +-- along with this program. If not, see . +-- +-- Code etc: https://gitlab.com/lago/texlogsieve + +--[[ + +---------------- +THE TeX LOG FILE +---------------- + +TeX uses three low-level commands for logging: + + 1. \message -> outputs to both the console and the log file (most + low-level TeX messages, such as open/close files, shipouts etc. + behave *more or less* as if they were generated by \message) + + 2. \write with an unallocated stream identifier (typically, 0) -> + also outputs to both the console and the log file. + + 2. \write with a negative stream identifier (typically, -1) -> outputs + to the log file only + +\write and \message behave differently: + + * Normally, \write appends a line feed character (LF) to the text, so + a sequence of \write commands results in multiple lines. + + * \message checks whether the last thing that was sent out was another + \message; if so, it adds a space character and outputs the text (both + the previous text and the new one are on the same line, separated by + a space), otherwise it just outputs the text (in this case, the new + text is at the beginning of a line). Note, however, that there are + some \message's that are not separated by spaces, such as "))". + Also, in most cases (I could not figure out when this fails, but it + happens often), if \message realizes the new text will not fit in + the current line (the line would exceed max_print_line characters), + instead of wrapping the line as usual, it may output a LF and start + the text on a new line. + + * \write also checks if the last thing that was sent out was a message; + if so, it sends LF before the text, so that it starts at the + beginning of a line (it also sends LF after the text too, as always) + +Therefore, in the console, text output with \write always appears on a +new line. A sequence of calls to \message also always starts on a new +line, but the texts of all of them appear on the same line, separated +by spaces. + +However, things get messy in the log file. Basically, \message and +\write0 modify the same filedescriptor, while \write-1 modifies a +different filedescriptor. This means \message and \write0 are unaware +of \write-1 and vice-versa. As a result, the spaces and LFs that are +added according to what is output to the console get mixed up with what +is written only to the log file with \write-1. Therefore, there may be +unexpected empty lines or lines that start with a space character in +the log file. + +The LaTeX command \GenericInfo uses \write-1, while \GenericWarning +uses \write0. TeX and LaTeX also define \wlog, which is an alias for +\write-1; LaTeX defines \typeout, which is an alias for \write0. Some +packages define their own aliases; for example, pgfcore.code.tex does +\def\pgf@typeout{\immediate\write0}, graphics.sty does \let\Gin@log\wlog, +etc. Package infwarerr provides a compatibility layer for the LaTeX +standard logging commands, so that they can be used both in LaTeX and +in plain TeX, as \@PackageInfo, \@ClassWarning etc. + +With that in mind, we will consider that there are five kinds of message +in the LaTeX log file: + + * Ordinary messages -> messages that start at the beginning of the line + and end at the end of the line (they are created with \write), such as + + Document Class: book 2019/08/27 v1.4j Standard LaTeX document class + + For additional information on amsmath, use the `?' option. + + \openout4 = `somefile'. + + * Short messages -> messages that may begin/end anywhere on a line, + because the line they are in may contain multiple messages of + this type (they are created with \message), such as + + ASCII Hyphenation patterns for American English + + ) (/usr/share/texlive/texmf-dist/tex/generic/iftex/iftex.sty + -> these mean 'close last file' and 'open file .../iftex.sty' + + (/usr/share/texlive/texmf-dist/tex/latex/etoolbox/etoolbox.sty) + -> these mean 'open file .../etoolbox.sty' and 'close last file' + (which is etoolbox.sty, obviously) + + )) + -> these mean 'close the last two files' + + [1] [2] [3] + -> these mean 'shipout pages 1, 2, and 3' + + * Multiline messages -> messages that start at the beginning of a line, + continue for a few lines and end at the end of a line (the programmer + explicitly used multiple \write commands, a single \write command + with embedded newline characters, or single/multiple \message + commands with leading/trailing newline characters), such as + + Package biblatex Info: Automatic encoding selection. + (biblatex) Assuming data encoding 'utf8'. + + ************************************* + * Using libertinus math * + ************************************* + + ********************** + * No checksum found! * + ********************** + (from ydoc-doc.sty) + + * "Best-effort" multiline messages -> similar to the previous ones, + but created using multiple \message commands or a single one with + embedded newline characters but no leading and/or trailing newline + characters. They *usually* begin at the beginning of the line and + end at the end of the line because, as mentioned before, TeX usually + inserts a line break if the line would not fit otherwise. However, + that is not always true, especially if max_print_line is large. + Therefore, sometimes the message may begin in the middle of a line + and/or the various lines may be strung together or wrapped. + Examples: + + ***************************************************************** + GFS-Solomos style file by A. Tsolomitis + ***************************************************************** + (from gfssolomos.sty) + + =============== Entering putframe ==================== + \pagegoal =635.97621pt, \pagetotal =368.07768pt. + (from exam.cls) + + * Error messages TODO describe them here + +To complicate things, TeX by default wraps (breaks) any line longer +than max_print_line characters (by default, 79). Since some messages +may be output together on a single line, even short messages may be +broken across lines. At the same time, there are quite a few ordinary +lines that in practice happen to be max_print_line characters long, +which makes detecting line wrapping a real challenge. Also, for no +apparent reason, LuaTeX wraps some lines at max_print_line characters +and others at max_print_line +1 characters. More: I have seen at least +two cases in which TeX "forgot" to wrap a line, and sometimes there is +a blank line between the wrapped line and its continuation line. And +even more! LuaTeX does not break a line in the middle of a multibyte +UTF-8 character. That is obviously a good idea, but it means some lines +may be broken at lengths smaller than max_print_line. While this may +seem rare, it can happen when parts of the document text are included +in the log, as is the case with over/underfull box messages. + +So, if at all possible, it is a very good idea to set max_print_line +to a really large value (such as 100,000), effectively disabling line +wrapping. It was useful in the 1980s, but not anymore (your terminal +or editor wraps automatically). + + +---------------------- +HOW THIS PROGRAM WORKS +---------------------- + +To read this section, pretend for a moment that TeX does not wrap long +lines. + +We have a set of handlers, i.e., objects that process specific kinds +of message. Each handler checks if a given line matches some patterns +to decide whether it is supposed to process it (return true) or not +(return false). + +There is a loop that, at each iteration, reads a new line from the log +file with moreData() and uses chooseHandler() to call each handler in +turn until one of them processes that line. After the right handler +does its thing, it sends the message to the output, erases this input +line and returns true, which causes the loop to restart, skipping the +remaining handlers. + +The loop may behave a little differently in two cases: + + 1. If the handler processes just a part of the input line, which may + happen if the line contains multiple short messages, it removes + the processed data from the line and leaves the rest. At the next + iteration, no new data is read: the loop processes the remaining + material from the same line. + + 2. If the handler processes the input and expects specific lines of + content to follow, it can preset itself as the next handler, + temporarily bypassing the choice step. + +When the line (or part of it) is not recognized by any handler, it is +appended to unrecognizedBuffer. We may sometimes concatenate multiple +text chunks together here because, during processing, we may break the +line into chunks when in fact it comprises a single message. In any +case, we know for sure that the message (or messages) currently in +unrecognizedBuffer is complete when either (1) we identify the next +short message in the line or (2) we proceed to the next input line. +When either happens, we send the buffer to the output. + +We know most messages, but not all, start at the beginning of a line. +Therefore, we keep two sets of handlers: beginningOfLineHandlers and +anywhereHandlers. We use the boolean atBeginningOfLine to know when +we may skip trying the beginningOfLineHandlers. + +We mentioned that the handler "sends the message to the output". The +handler actually creates a Message object and calls the dispatch() +function to send that object to a coroutine that handles output. The +coroutine aggregates messages by page, generates summaries for some +kinds of message (for example, it may list all undefined references +together) and prints out the report in different formats. + +Sometimes we need to be able to check the content of the next line +to decide what to do about the current line (for example, different +messages may begin with a line like "**********"). So, we do not only +read one line from the input at each iteration; instead, we have a +buffer with the next few lines. When the current line has been +completely processed, moreData() simply refills the buffer and calls +Lines:gotoNextLine(), which makes the next line (line 1) become the +current line (line 0), the following line (line 2) become the next +line (line 1) etc. + +That would be all if TeX did not wrap long lines, but it does. To unwrap +lines when needed, we (1) check that the line is max_print_lines long; +if so, we (2) check whether the next line is the beginning of a known +message; if it is not, we (3) check whether unwrapping lines makes us +recognize a message that was not identified without unwrapping. Because +of 3, we do this in each of the handlers and not beforehand. To unwrap +a line, we simply join the current line with the next one from the +buffer. + +Note that, if you reconfigure the variable max_print_line to a value +larger than 9999 (which is a good thing to do), this program assumes +(quite reasonably) that there is no line wrapping. + + +------------ +THE HANDLERS +------------ + +We want to be able to explicitly recognize as much messages as possible +(and leave the least amount possible for the unrecognizedBuffer) for at +least three reasons: + + 1. A character such as "(", ")", "[", or "]" in an unrecognized message + may confuse the program (these chars may indicate open/close file + and begin/end shipout). If it is part of a known message, it will + not be mistaken for an open/close file etc. + + 2. By default, TeX wraps lines longer than max_print_line characters, + and unwrapping them involves making sure that the following line + is not the start of a new message. For this to be reliable, + unknown messages should be kept to a minimum. + + 3. We can assign severity levels to known messages; unknown messages + must always be handled as high-severity, polluting the output. + +At each iteration, chooseHandler() calls doit() for every handler. The +handler returns true to signal that chooseHandler() should proceed to +the next iteration. It does that if it did "something" to change the +status for the next iteration: + + * It processed a complete message in this iteration (i.e., the whole + message was contained in the current line); + + * It processed the message partially and defined nextHandler; + + * It finalized the processing of a previous partial message (i.e., it + realized the message has ended). This only happens if the handler + was previously set as nextHandler. When this happens, it sometimes + does nothing with the content of the current line, only outputs the + complete message. Still, when the loop restarts, it will no longer + be the nextHandler (and that is "something"). + +A handler must provide: + +1. A doit() method that returns true or false to indicate whether it + actually did something with the current line or not. + +2. A canDoit(position) method that returns true or false to indicate + whether the handler can/should process the line given by "position" + (we use this to identify wrapped lines, as explained later). + +3. An init() method to do any necessary setup after the command line + has been read (it is ok to do nothing). The easiest way to do this + is to "inherit" from HandlerPrototype. + +4. For handlers that deal with messages that can appear in the middle + of a line, a lookahead(position) method to indicate whether there is + a message that the handler can/should process in the line indicated + by "position", even if there is something else in the line before + that message. + +Besides true/false, canDoit() also returns a table with extra data. In +some cases, this table is empty; in others, the handler's doit() method +knows what to do with it. There are two places outside the handler +itself where this data is used: + +1. In handleUnrecognizedMessage(), where we call lookahead() and use + the value of "first" that should be embedded in this table. + +2. In Lines:noHandlersForNextLine(), where we treat openParensHandler + and openSquareBracketHandler specially and read file/page data from + them. + +A simple handler: +----------------- + + exampleHandler = {} + exampleHandler.pattern = '^%s*L3 programming layer %b<> xparse %b<>' + + function exampleHandler:init() + end + + function exampleHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first, last = string.find(line, self.pattern) + if first == nil then return false + return true, {first = first, last = last} + end + + function exampleHandler:doit() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + local msg = Message:new() + msg.severity = DEBUG + msg.content = string.sub(Lines.current, 1, data.last) + dispatch(msg) + Lines:handledChars(data.last) + return true + end + + function exampleHandler:lookahead(position) + local tmp = self.pattern + self.pattern = string.sub(self.pattern, 2) -- remove leading '^' + local result, data = self:canDoit() + self.pattern = tmp + return result, data + end + +There are two special handlers, which we use as prototypes +(https://www.lua.org/pil/16.1.html ) and derive some other handlers +from: + + - stringsHandler - handles a list of predefined multiline strings + that may or may not begin at the beginning of a line and may or may + not end at the end of a line. We identify where the last line of + the message ends and remove that from the input line, leaving the + rest for the next handler. In general, the pattern we look for in + each line should match the whole line and should not end with + something like ".*", unless we are absolutely sure that (1) each line + always ends at the end of the line and (2) the line is short enough + that it is never wrapped (which also implies that the first line + always starts at the start of the line). This handler is quite + complex because it has to deal with many different scenarios. We + derive other handlers from the basic prototype so that we can assign + different severity levels to each one. Derived handlers differ from + the prototype only by severity level and the set of patterns to + search for. + + - genericLatexHandler -> handles the multiline messages generated by + the \PackageInfo, \ClassWarning etc. LaTeX commands. The handler + does not need to know in advance the text for all these messages; + it looks for generic patterns instead and extracts from the message + itself the name of the package and severity level. It is able to + identify multiline messages by checking if the following lines are + prefixed with a specific pattern, so it can also handle messages + with an unknown number of lines. We derive other handlers from the + basic prototype because, for each kind of message, we use a different + set of pattern captures, and we need to treat these differently. + Derived handlers differ from the prototype by the set of patterns + to search for and by the unpackData() method, which deals with the + specific pattern captures. + + +---------------- +UNWRAPPING LINES +---------------- + +As mentioned, each handler has a canDoit(position) method, where +"position" is the line number in the Lines input buffer (0 is the +current line, 1 is the next line etc.). As expected, doit() calls +canDoit() to check whether it should proceed of not. However, that +is not all: if canDoit() fails to find a match, it checks whether the +line might be a wrapped line. To detect a wrapped line, canDoit() +uses Lines:seemsWrapped() to do three things: + +1. Check that the line is the "right" size (in Lines:wrappingLength()) + +2. Check that the next line is not the beginning of a known message + (in Lines:noHandlersForNextLine()) + +3. Check whether unwrapping the line actually gives us something, i.e., + the unwrapped line matches something that its two separate parts + did not. + +The problem is in step (2): this entails calling canDoit() from all +handlers on the following line, which means that it may be called many +times and may even call itself on a different line. Therefore, it is +essential that canDoit() have no side effects, i.e., it should not set +any state besides the return values. For the same reason, canDoit() +cannot alter the content of the Lines buffer when it tries to unwrap a +line; it should only use temporary variables instead (not only that: +if unwrapping does not yield a match, we do not want to do it either). + +canDoit() may, however, return a "hint" about the line wrapping - either +the text or the pattern that finally matched. Some handlers do that and, +in doit(), take the string or pattern found by canDoit() and unwrap +lines until finding a match to that string or pattern. Others cannot do +this due to various reasons and need to repeat the work already done +by canDoit() (the code is different, however). + +Note also that some handlers, such as underOverFullBoxHandler and +genericLatexHandler, cannot do (3), as they do not know in advance +how the end of a given message should look like. The bottom line is, +line unwrapping is done in many different ways according to context. + +Finally, this all means that we may call canDoit() from all handlers on +a given line many times. This gets really bad with stringsHandler: for +a sequence of k consecutive lines that are max_print_line long, this +handler alone is O(n^{k+1}), where n is the number of patterns that it +checks for (around 40). A previous implementation proved this to be +impractical, so we work around this problem with memoization. + + +----------------------------------------- +DETAILS ABOUT UNDER/OVERFULL BOX MESSAGES +----------------------------------------- + +These are actually several different messages: + +Overfull \[hv]box (Npt too wide) SOMEWHERE +Underfull \[hv]box (badness N) SOMEWHERE + +Possible SOMEWHEREs: + +1. detected at line N + -> this is something like a makebox (horizontal) or parbox (vertical) + with an explicit size argument. For hboxes, this is followed by + the offending text. + +2. has occurred while \output is active + -> If horizontal, this is probably in a header, footer or something + similar; if vertical, the vertical glues got too stretched + +3. in alignment at lines LINE NUMBERS + -> the problematic box is part of a tabular or math alignment + environment. The lines correspond to the whole align structure, + not only the problematic box. This should only appear as an + horizontal problem. This is followed by the offending text, but + it is more often than not just a bunch of "[]" to indicate nested + boxes + +4. in paragraph at lines LINE NUMBERS + -> "Normal" text. This also only appears as an horizontal problem. + This is followed by the offending text, which may include a + few "[]" for whatsits, glues etc. In particular, the text often + begins with "[]", indicating the left margin glue. + +In the log file, all under/overfull box messages are followed by a +description of the boxes involved. This is *not* normally included in +the console output (but it may be, depending on \tracingonline). The +level of detail of this description is controlled by \showboxdepth +and \showboxbreadth. The default for these in LaTeX is -1, which means +this description is omitted and replaced by "[]", so it looks like this: + +Underfull \vbox (badness 10000) detected at line 128 + [] <-- this is the description + +If the message includes the offending text, the description comes +after it: + +Underfull \hbox (badness 3417) in paragraph at lines 128--128 + []\T1/LibertinusSerif-TLF/b/n/14.4 (+20) Some document text... + [] <-- this is the description + +If there is no offending text, the description may appear in the same +line as the under/overfull box message (both are \message's). The +offending text, if any, always starts at the beginning of a line and +ends at the end of a line. + +About the description: https://tex.stackexchange.com/a/367589/217608 + +This all means that handling these messages from a pipe is different +than from the log file, because in the log file you know there will +be a "[]" after the message. What we do here is check whether that +string is there; if it is, we remove it. + +under/overfull messages that do not include the offending text are +\message's and, therefore, there may be extra text (such as a shipout) +on the same line. + +--]] + + +--[[ ##################################################################### ]]-- +--[[ ################ INIT, MAIN LOOP, CHOOSING HANDLER ################## ]]-- +--[[ ##################################################################### ]]-- + + DEBUG = 0 + INFO = 1 + WARNING = 2 +CRITICAL = 3 + UNKNOWN = 4 + +function main(arg) + processCommandLine(arg) + initializeGlobals() + initializeKpse() + registerHandlers() + registerSummaries() + convertFilterStringsToPatterns() + + while moreData() do + if nextHandler == nil then + chooseHandler() + else + handler = nextHandler + nextHandler = nil + handler:doit() + end + end + + -- dispatch remaining messages, if any + epilogueHandler:flush() + flushUnrecognizedMessages() + dispatch(nil) -- end the output coroutine +end + +function moreData() + -- if there is remaining data from the previous iteration, + -- we leave everything as-is for it to be processed now + local tmp = Lines.current + if tmp ~= nil and string.len(tmp) > 0 then return true end + + -- Refill the buffer. A simple experiment suggests 8 lines + -- is enough, but why not use a higher value? + while Lines:numLines() < 15 do + tmp = logfile:read("*line") + if tmp == nil then break end + -- We *need* to remove blank lines here because + -- sometimes a wrapped line is followed by a blank + -- line, which messes our detection of wrapped lines. + if string.len(tmp) > 0 then Lines:append(tmp) end + end + + -- proceed to the next line + flushUnrecognizedMessages() + Lines:gotoNextLine() + + return Lines.current ~= nil +end + +--[[ +chooseHandler() never tries to process more than one message in a single +iteration for at least three reasons: + + * There may be no more data available on the current line, so we + need to call moreData(); + + * Maybe the next handler is one that we have already tried in this + iteration; skipping it and trying others may fail; + + * Maybe the handler that last processed the data predefined the next + handler, and we should not interfere with that. +--]] + +function chooseHandler() + -- Some messages can only appear at the beginning of a line + if Lines.atBeginningOfLine then + for _, candidateHandler in ipairs(beginningOfLineHandlers) do + if candidateHandler:doit() then return end + end + end + + -- Others may appear anywhere + for _, candidateHandler in ipairs(anywhereHandlers) do + if candidateHandler:doit() then return end + end + + -- No handler succeeded, which means this is an unrecognized message + -- (or a fragment of one); Add to unrecognizedBuffer. + handleUnrecognizedMessage() +end + +function handleUnrecognizedMessage() + -- Before sending this to the unrecognizedBuffer, check if + -- there is another known message later on this same line. + + local last = string.len(Lines.current) + + for _, handler in ipairs(anywhereHandlers) do + local match, data = handler:lookahead() + if match and data.first -1 < last then last = data.first -1 end + end + + unrecognizedBuffer = unrecognizedBuffer .. string.sub(Lines.current, 1, last) + Lines:handledChars(last) +end + +function flushUnrecognizedMessages() + unrecognizedBuffer = trim(unrecognizedBuffer) + if unrecognizedBuffer == "" then return end + + local msg = Message:new() + msg.content = unrecognizedBuffer + dispatch(msg) + unrecognizedBuffer = "" +end + +-- Setup initial status (lots of globals, sue me) +function initializeGlobals() + + -- Chunks of text that were not recognized by any handler + unrecognizedBuffer = "" + + -- The user may choose to silence some files. When one of these is + -- opened/closed, this is set to true or false accordingly. The value + -- is then used by Message:new() + mute = false + + -- List of files that TeX had open at a given time during processing + openFiles = Stack:new() + + -- "List" of currently active shipouts. There is only ever one shipout + -- active at any time, but we borrow the design of openFiles because + -- there may be "[" and "]" characters that do not correspond to any + -- shipout, so we use this to keep track of them. + shipouts = Stack:new() + + -- Counter, so we know the physical page number + numShipouts = 0 + + -- map physicalPage (from numShipouts) to latexPage (LaTeX counter) + latexPages = {} + + -- After printing each message, the output coroutine stores them + -- in currentPageMessages. When it receives a shipout message, + -- it traverses currentPageMessages adding the page number it + -- just learned about to each of the messages, calls :toSummary() + -- for each of them and and clears currentPageMessages (we do this + -- so the data in the summaries may include the page numbers). The + -- objects representing the summary for each kind of message are + -- stored in summaries, so after all messages we can just traverse + -- this list calling :toString() and get all the summaries. The + -- summaries table is populated by registerSummaries(). + currentPageMessages = {} + summaries = {} + + -- When the same message appears several times, we only output it + -- once, thanks to this table. This is used by showMessage() + alreadySeen = {} + + -- All handlers should be in either of these. They are populated by + -- registerHandlers(). + beginningOfLineHandlers = {} + anywhereHandlers = {} + + -- Does the log file have wrapped lines? + -- This may be changed by initializeKpse(). + badLogFile = true +end + +function initializeKpse() + -- In texlua, the texconfig table (the table that records some TeX + -- config variables) is not initialized automatically; we need to + -- call this to initialize it so we can read "max_print_line". If + -- I understand things correctly, the name used here affects the + -- loaded configuration options: using a name such as "texlogsieve" + -- would allow us to add custom options to texmf.cnf. But since + -- all we want to do is search for files and read the value of + -- "max_print_line", let's just pretend we are luatex. + kpse.set_program_name("luatex") + + max_print_line = tonumber(kpse.var_value("max_print_line")) + if max_print_line ~= nil and max_print_line > 9999 then + badLogfile = false + else + badLogfile = true + end +end + +function registerHandlers() + table.insert(beginningOfLineHandlers, citationHandler) + table.insert(beginningOfLineHandlers, referenceHandler) + table.insert(beginningOfLineHandlers, labelHandler) + table.insert(beginningOfLineHandlers, genericLatexHandler) + table.insert(beginningOfLineHandlers, latex23MessageHandler) + table.insert(beginningOfLineHandlers, genericLatexVariantHandler) + table.insert(beginningOfLineHandlers, providesHandler) + table.insert(beginningOfLineHandlers, geometryDetailsHandler) + table.insert(beginningOfLineHandlers, epilogueHandler) + table.insert(beginningOfLineHandlers, underOverFullBoxHandler) + table.insert(beginningOfLineHandlers, utf8FontMapHandler) + table.insert(beginningOfLineHandlers, missingCharHandler) + table.insert(beginningOfLineHandlers, beginningOfLineDebugStringsHandler) + table.insert(beginningOfLineHandlers, beginningOfLineInfoStringsHandler) + table.insert(beginningOfLineHandlers, beginningOfLineWarningStringsHandler) + table.insert(anywhereHandlers, anywhereDebugStringsHandler) + table.insert(anywhereHandlers, anywhereInfoStringsHandler) + table.insert(anywhereHandlers, anywhereWarningStringsHandler) + table.insert(anywhereHandlers, openParensHandler) + table.insert(anywhereHandlers, closeParensHandler) + table.insert(anywhereHandlers, openSquareBracketHandler) + table.insert(anywhereHandlers, closeSquareBracketHandler) + + for _, handler in ipairs(beginningOfLineHandlers) do + handler:init() + end + + for _, handler in ipairs(anywhereHandlers) do + handler:init() + end +end + +function registerSummaries() + table.insert(summaries, underOverSummary) + table.insert(summaries, missingCharSummary) + table.insert(summaries, repetitionsSummary) + table.insert(summaries, citationsSummary) + table.insert(summaries, referencesSummary) + table.insert(summaries, labelsSummary) +end + +function convertFilterStringsToPatterns() + local tmp = {} + for _, pattern in ipairs(SEMISILENCE_FILES) do + table.insert(tmp, globtopattern(pattern)) + end + SEMISILENCE_FILES = tmp + + tmp = {} + for _, pattern in ipairs(SILENCE_FILES_RECURSIVE) do + table.insert(tmp, globtopattern(pattern)) + end + SILENCE_FILES_RECURSIVE = tmp + + tmp = {} + for _, str in ipairs(SILENCE_STRINGS) do + local pat = stringToPattern(str) + table.insert(tmp, pat) + end + SILENCE_STRINGS = tmp + + tmp = {} + for _, str in ipairs(SILENCE_PKGS) do + local pat = stringToPattern(str) + table.insert(tmp, pat) + end + SILENCE_PKGS = tmp +end + +function processCommandLine(args) + HEARTBEAT = true + PAGE_DELAY = true + ONLY_SUMMARY = false + SHOW_SUMMARY = true + SHOW_SHIPOUTS = false + RAW = false + SILENCE_REPETITIONS = true + MINLEVEL = WARNING + + SILENCE_STRINGS = {} + SILENCE_PKGS = {} -- just the package names + SEMISILENCE_FILES = {} -- filenames (without leading path), file globs work + SILENCE_FILES_RECURSIVE = {} -- same + + + -- "-l level -c configFile" + local optionsWithArgs = "lc" + local vars = simpleGetopt(args, optionsWithArgs) + + --help + -- "-h" + if vars.help or vars.h then + local msg = [[ +Usage: texlogsieve [OPTION]... [INPUT FILE] +texlogsieve reads a LaTeX log file (or the standard input), filters +out less relevant messages, and displays a summary report. + +Options: + --page-delay, --no-page-delay enable/disable grouping + messages by page before display + --summary, --no-summary enable/disable final summary + --only-summary no filtering, only final summary + --shipouts, --no-shipouts enable/disable reporting shipouts + --repetitions, --no-repetitions allow/prevent repeated messages + --heartbeat, --no-heartbeat enable/disable progress gauge + -l LEVEL, --minlevel=LEVEL filter out messages with severity + level lower than [LEVEL]. Valid + levels are DEBUG, INFO, WARNING, + CRITICAL, and UNKNOWN + -u, --unwrap-only no filtering or summary, only + unwrap long, wrapped lines + --silence-package=PKGNAME suppress messages from package + PKGNAME; can be used multiple times + --silence-string=EXCERPT suppress messages containing text + EXCERPT; can be used multiple times + --silence-file=FILENAME suppress messages generated during + processing of FILENAME; can be used + multiple times + --semisilence-file=FILENAME similar to --silence-file, but not + recursive + --add-debug-message=MESSAGE add new recognizable debug message + --add-info-message=MESSAGE add new recognizable info message + --add-warning-message=MESSAGE add new recognizable warning message + -c cfgfile, --config-file=cfgfile read options from config file + -h, --help give this help list + --version print program version]] + + for _, line in ipairs(linesToTable(msg)) do print(line) end + os.exit(0) + end + + --version + if vars.version then + print("texlogsieve 1.0.0-beta-1") + print("Copyright (C) 2021 Nelson Lago ") + print("License GPLv3+: GNU GPL version 3 or later " + .. ".") + print("This is free software: you are free to change " + .. "and redistribute it.") + print("There is NO WARRANTY, to the extent permitted by law.") + os.exit(0) + end + + --config-file=file + -- "-c file" + local configFileName + if vars['config-file'] ~= nil then configFileName = vars['config-file'] end + if vars.c ~= nil then configFileName = vars.c end + if configFileName ~= nil then + configFileName = configFileName[1] + local filevars = processConfigFile(configFileName) + + -- merge filevars with vars; vars has precedence + for k, v in pairs(vars) do + if type(v) == "boolean" then + filevars[k] = v + elseif filevars[k] == nil then + filevars[k] = v + else + -- the value is a table, so append + for _, item in ipairs(v) do + table.insert(filevars[k], item) + end + end + end + + -- use the merged values + vars = filevars + end + + --unwrap-only + -- "-u" + if vars['unwrap-only'] or vars.u then + -- these may be overriden below, so order matters + RAW = true + SHOW_SUMMARY = false + PAGE_DELAY = false + SHOW_SHIPOUTS = true + SILENCE_REPETITIONS = false + MINLEVEL = DEBUG + end + + --page-delay + --no-page-delay + --page-delay=true/false + if vars['no-page-delay'] + or vars['page-delay'] ~= nil and not vars['page-delay'] then + + PAGE_DELAY = false + SHOW_SHIPOUTS = true -- this may be overriden below + end + if vars['page-delay'] then PAGE_DELAY = true end + + --only-summary + if vars['only-summary'] then ONLY_SUMMARY = true end + + --no-summary + --summary + --summary=true/false + if vars['no-summary'] or vars.summary ~= nil and not vars.summary then + SHOW_SUMMARY = false + SILENCE_REPETITIONS = false + end + if vars.summary then SHOW_SUMMARY = true end + + --no-shipouts + --shipouts + --shipouts=true/false + if vars['no-shipouts'] or vars.shipouts ~= nil and not vars.shipouts then + SHOW_SHIPOUTS = false + end + if vars.shipouts then SHOW_SHIPOUTS = true end + + --minlevel + -- "-l" + local level + if vars.minlevel ~= nil then level = vars.minlevel end + if vars.l ~= nil then level = vars.l end + + if level ~= nil then + level = string.lower(level[1]) + if level == "debug" then MINLEVEL = DEBUG + elseif level == "info" then MINLEVEL = INFO + elseif level == "warning" then MINLEVEL = WARNING + elseif level == "critical" then MINLEVEL = CRITICAL + else MINLEVEL = UNKNOWN + end + end + + --no-repetitions + --repetitions + --repetitions=true/false + if vars['no-repetitions'] + or vars.repetitions ~= nil and not vars.repetitions then + + SILENCE_REPETITIONS = true + end + if vars.repetitions then SILENCE_REPETITIONS = false end + + --no-heartbeat + --heartbeat + --heartbeat=true/false + if vars['no-heartbeat'] or vars.heartbeat ~= nil and not vars.heartbeat then + HEARTBEAT = false + end + if vars.heartbeat then HEARTBEAT = true end + + if vars.filename == nil then + logfile = io.stdin + else + logfile = assert(io.open(vars.filename, "r")) + end + + if vars['silence-string'] then SILENCE_STRINGS = vars['silence-string'] end + + if vars['silence-package'] then SILENCE_PKGS = vars['silence-package'] end + + if vars['silence-file'] then SILENCE_FILES_RECURSIVE = + vars['silence-file'] end + + if vars['semisilence-file'] then SEMISILENCE_FILES = + vars['semisilence-file'] end + + if vars['add-debug-message'] then + for _, msg in ipairs(vars['add-debug-message']) do + local pat = stringToPattern(msg) + if not string.find(pat, '^', 1, true) then pat = '^%s*' .. pat end + pat = string.gsub(pat, '\\n', '\n') + table.insert(anywhereDebugStringsHandler.patterns, pat) + end + end + + if vars['add-info-message'] then + for _, msg in ipairs(vars['add-info-message']) do + local pat = stringToPattern(msg) + if not string.find(pat, '^', 1, true) then pat = '^%s*' .. pat end + pat = string.gsub(pat, '\\n', '\n') + table.insert(anywhereInfoStringsHandler.patterns, msg) + end + end + + if vars['add-warning-message'] then + for _, msg in ipairs(vars['add-warning-message']) do + local pat = stringToPattern(msg) + if not string.find(pat, '^', 1, true) then pat = '^%s*' .. pat end + pat = string.gsub(pat, '\\n', '\n') + table.insert(anywhereWarningStringsHandler.patterns, msg) + end + end +end + +function processConfigFile(filename) + configfile = assert(io.open(filename, "r")) + local fileOptions = {} + + while true do + local line = configfile:read("*line") + if line == nil then break end + + line = trim(line) + local first = string.find(line, '^#') + if first == nil and string.len(line) > 0 then + + local equals = string.find(line, '=', 1, true) + if equals ~= nil then + optname = string.sub(line, 1, equals -1) + optval = string.sub(line, equals +1) + optname = trim(optname) + optval = trim(optval) + else + optname = line + optval = true + end + simpleGetoptStoreVal(fileOptions, optname, optval) + end + end + + return fileOptions +end + + +--[[ ##################################################################### ]]-- +--[[ ################# OUTPUT COROUTINE AND FORMATTING ################### ]]-- +--[[ ##################################################################### ]]-- + +outputCoroutine = coroutine.create( + function(msg) + while msg ~= nil do + processMessage(msg) + msg = coroutine.yield() + end + finishProcessingMessages() + end +) + +dispatch = function(msg) coroutine.resume(outputCoroutine, msg) end + +function processMessage(msg) + if ONLY_SUMMARY or PAGE_DELAY then + heartbeat:tick() + else + showMessage(msg) + end + + -- aggregate until shipout + table.insert(currentPageMessages, msg) + + if msg.shipout then + heartbeat:stop() + + for _, tmp in ipairs(currentPageMessages) do + tmp.physicalPage = msg.physicalPage + tmp:toSummary() + end + + if PAGE_DELAY and not ONLY_SUMMARY then + showPageMessages() + end + + currentPageMessages = {} + end +end + +function finishProcessingMessages() + heartbeat:stop() + + -- messages after the last shipout + if PAGE_DELAY and not ONLY_SUMMARY then + print("") + print("After last page:") + print("") + showPageMessages() + end + + -- now, the summaries + if SHOW_SUMMARY then showSummary() end +end + +function showMessage(msg) + local formatted = msg:toString() + if string.len(trim(formatted)) == 0 then return end + + if RAW then + for _, line in ipairs(linesToTable(formatted)) do print(line) end + return + end + + local pageinfo = "" + if msg.physicalPage ~= nil then + pageinfo = 'pg ' .. msg.physicalPage .. ': ' + end + local spaces = string.rep(" ", string.len(pageinfo)) + + if not SILENCE_REPETITIONS then + local lines = linesToTable(formatted) + for _, line in ipairs(lines) do + print(pageinfo .. line) + pageinfo = spaces + end + + return + end + + if alreadySeen[formatted] == nil then + alreadySeen[formatted] = {msg} + local lines = linesToTable(formatted) + for _, line in ipairs(lines) do + print(pageinfo .. line) + pageinfo = spaces + end + else + table.insert(alreadySeen[formatted], msg) + end +end + +function showPageMessages() + for _, msg in ipairs(currentPageMessages) do + showMessage(msg) + end +end + +function showSummary() + if not ONLY_SUMMARY then for i = 1, 5 do print("") end end + + for _, summary in ipairs(summaries) do + local formatted = summary:toString() + local prefix = "" + if string.len(trim(formatted)) > 0 then + for _, line in ipairs(linesToTable(formatted)) do + print(prefix .. line) + prefix = ' ' + end + print("") + end + end +end + +heartbeat = {} +heartbeat.chars = {'/', '-', '\\', '|'} +heartbeat.idx = 0 +heartbeat.cnt = 0 +heartbeat.startline = true + +function heartbeat:tick() + if not HEARTBEAT then return end + + if self.cnt % 5 == 0 then + if self.startline then + self.startline = false + else + io.stderr:write('\b') + end + local i = self.idx %4 +1 + io.stderr:write(self.chars[i]) + self.idx = self.idx +1 + end + self.cnt = self.cnt +1 +end + +function heartbeat:stop() + if not HEARTBEAT or self.startline then return end + + io.stderr:write('\b \b') + self.startline = true +end + + +--[[ ##################################################################### ]]-- +--[[ ########################### THE HANDLERS ############################ ]]-- +--[[ ##################################################################### ]]-- + +-- datepat and filepat will come in handy later on. +-- +-- Note that, in some cases, it may be useful to start filepat with '^[%.]?/'. +-- +-- filepat will fail: +-- +-- 1. If the path or filename includes weird characters, such as ":" or "|" +-- 2. If the file has no extension or the extension has only one character +-- 3. If the extension includes "-", "_", or spaces +-- 4. If filepat should match the end of the message and the matching line is +-- wrapped in the middle of the file extension, for example "myfile.pd\nf" +-- (but we have a hack in unwrapUntilPatternMatches() to work around that) +-- +-- More importantly, filepat allows for spaces and multiple dots in filenames, +-- but this means it may match something that is not really a filename. Don't +-- blindly trust it! We do not use this to detect open/close file; for that, +-- check guessFilename(). + +datepat = '%d%d%d%d[/%-%.]%d%d[/%-%.]%d%d' + +filepat = '%a?[:]?' + .. '[^%%:;,%=%*%?%|%&%$%#%!%@"%`\'%<%>%[%]%{%}]+' + .. '%.' + .. '[^/ %-%_%.%%:;,%=%*%?%|%&%$%#%!%@"%`\'%<%>%[%]%{%}]' + .. '[^/ %-%_%.%%:;,%=%*%?%|%&%$%#%!%@"%`\'%<%>%[%]%{%}]+' + + +------------------------------------------------------------------------------- +-- HandlerPrototype +------------------------------------------------------------------------------- + +HandlerPrototype = {} + +function HandlerPrototype:new() + local o = {} + setmetatable(o, self) + self.__index = self + return o +end + +-- Some handlers need an init() method; by inheriting from this, +-- we can simply iterate over all of them calling init(). +function HandlerPrototype:init() +end + +-- Only some of the handlers use this implementation +function HandlerPrototype:unwrapLines() + while Lines:seemsWrapped() do Lines:unwrapOneLine() end +end + +function HandlerPrototype:newMessage() + return Message:new() +end + + +------------------------------------------------------------------------------- +-- epilogueHandler +-- +-- This handles the generic messages at the end of each LaTeX run. We could +-- handle each one with stringsHandler, but this handler allows us to treat +-- the whole group of lines together, which means we do not need to have +-- dedicated rules for each line in them. Also, there are some lines here +-- that are not wrapped as the rest. +------------------------------------------------------------------------------- + +epilogueHandler = HandlerPrototype:new() + +function epilogueHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + -- This appears in the logfile but not on stdout + local _, last = string.find(line, "^Here is how much") + if last == nil then + -- This appears on stdout (and in the log, of course) + _, last = string.find(line, + "^%(see the transcript file for additional information%)") + else + last = string.len(line) + end + + if last == nil then + return false, {} + else + return true, {last = last} + end +end + +function epilogueHandler:doit() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + self.message = self:newMessage() + self.message.content = string.sub(Lines.current, 1, data.last) + self.message.severity = DEBUG + Lines:handledChars(data.last) + self.doit = self.handleOtherLines + nextHandler = self + self.processingFilelist = false + return true +end + +-- We need to "manually" unwrap the file list because some +-- lines are wrapped at lengths different from max_print_line +function epilogueHandler:handleOtherLines() + local first = string.find(Lines.current, '^Output written') + if first ~= nil then + self.processingFilelist = false + self.message.content = '\n' .. self.message.content + end + + if self.processingFilelist then + self.message.content = self.message.content .. Lines.current + else + self:unwrapLines() + self.message.content = self.message.content .. '\n' .. Lines.current + end + + first = string.find(Lines.current, '^[%<%{]') + if first ~= nil then self.processingFilelist = true end + + Lines:handledChars() + nextHandler = self + return true +end + +-- We do not know when the epilogue ends, so main() +-- calls this after the last line is read +function epilogueHandler:flush() + if self.message ~= nil then dispatch(self.message) end +end + + +------------------------------------------------------------------------------- +-- underOverFullBoxHandler +-- +-- Handles under/overfull multiline messages. There are usually important, +-- so we want to be able to filter them specifically and also to present +-- a summary about them. Besides that, they may contain spurious "(", ")", +-- "[", and "]" characters that might confuse the program if left as +-- "unrecognized". +------------------------------------------------------------------------------- + +underOverFullBoxHandler = HandlerPrototype:new() + +function underOverFullBoxHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local basePattern = "^([UO][nv][de][e]?r)full \\(.)box (%b())" + local first, last, underover, + verthoriz, amount = string.find(line, basePattern) + + if first == nil then + return false, {} + else + return true, {underover = underover, verthoriz = verthoriz, + amount = amount, last = last} + end +end + +function underOverFullBoxHandler:handleFirstLine() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + self.message = underOverMessage:new() + self.message.content = string.sub(Lines.current, 1, data.last) + self.message.underover = data.underover + self.message.verthoriz = data.verthoriz + self.message.amount = data.amount + self.message.severity = WARNING + local first = string.find(data.amount, 'badness 10000') + if first ~= nil then self.message.severity = CRITICAL end + Lines:handledChars(data.last) + + self.doit = self.handleClosing + + _, last = string.find(Lines.current, "has occurred while \\output is active") + if last == nil then + _, last = string.find(Lines.current, "in %S+ at lines %d+%-%-%d+") + if last == nil then + _, last = string.find(Lines.current, "detected at line %d+") + if last ~= nil and data.verthoriz == 'h' then + self.doit = self.handleOffendingText + end + else + self.doit = self.handleOffendingText + end + end + + if last == nil then + io.stderr:write(" texlogsieve: parsing error\n") + self.doit = self.handleFirstLine + dispatch(self.message) + return true + end + + self.message.content = self.message.content + .. string.sub(Lines.current, 1, last) + + Lines:handledChars(last) + nextHandler = self + + return true +end + +underOverFullBoxHandler.doit = underOverFullBoxHandler.handleFirstLine + +function underOverFullBoxHandler:handleOffendingText() + self:unwrapLines() + self.message.failedText = Lines.current + Lines:handledChars() + self.doit = self.handleClosing + nextHandler = self + return true +end + +function underOverFullBoxHandler:handleClosing() + local _, last, closing = string.find(Lines.current, '^%s*(%b[])%s*$') + if last ~= nil then + Lines:handledChars(last) + self.message.closing = closing + end + + dispatch(self.message) + self.doit = self.handleFirstLine + return true +end + + +------------------------------------------------------------------------------- +-- stringsHandler +-- +-- This is the most complex handler. It deals with predefined strings that +-- may span multiple lines. The message may start anywhere on the line (this +-- handler can be in anywhereHandlers) and may end before the end of the +-- line. In fact, depending on max_print_line, it is even possible that the +-- many lines of the message are concatenated in a single line in the log +-- or, conversely, that some lines are wrapped. So, for example, the +-- developer may have envisioned a message like +-- +-- ******************** +-- * Hi there! * +-- ******************** +-- +-- but this might turn to +-- +-- ******************** * Hi there! * ******************** +-- +-- or +-- +-- ****************** +-- ** +-- * Hi there! +-- * +-- ****************** +-- ** +-- +-- or even +-- +-- ****************** +-- ** * Hi there! +-- * ************ +-- ******** +-- +-- So, what we do here is to consider every line in the search pattern as a +-- segment of the message that may start in the middle of a line and/or may +-- be wrapped at the end of the line. We match each of these segments in +-- turn. Because of that, the patterns should completely match all lines in +-- the message, not just the beginning of the line followed by ".*" or ".+". +-- +-- Still, if you know that a specific message or line (1) always starts +-- at the beginning of the line, (2) never gets wrapped, and (3) is never +-- followed by another message in the same line, then you can match just +-- the beginning of the line and use ".*" for the rest. There are a few +-- messages below defined like this. +-- +-- Note that, when the handler is executed, the pattern *is* at the beginning +-- of the current line (in some cases, with leading spaces) because, if there +-- was any leading text originally in the line, some previous handler has +-- already removed it. This is why we can (and should!) anchor the pattern +-- with "^%s*". As before, if you do know that the line always starts at the +-- beginning of a line, you may instead anchor the pattern with "^". Either +-- way, we assume we cannot know the true length of the line, so it may be +-- wrapped at any point. Also, do not forget about lookahead(), which removes +-- the "^" anchor. +------------------------------------------------------------------------------- + +stringsHandler = HandlerPrototype:new() + +function stringsHandler:canDoit(position) + for _, pattern in ipairs(self.patterns) do + local success, data = self:canDoitRecursive(pattern, position, 0, 0) + if success then + data.pattern = pattern + return true, data + end + end + + return false, {} +end + +function stringsHandler:handleFirstLine() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + self.message = self:newMessage() + self.message.severity = self.severity + + local _, last = string.find(Lines.current, '^%s+') + if last ~= nil then Lines:handledChars(last) end + + self.captures = {} -- just in case we want to use captures + self.patternLines = data.pattern -- the table with the pattern lines + self.patternLineNumber = 1 + self.doit = self.handleLines -- for the next lines, if any + + -- after this initial setup, the first line is handled like the others + self:handleLines() + + return true +end + +stringsHandler.doit = stringsHandler.handleFirstLine + +function stringsHandler:handleLines() + + local pat = self.patternLines[self.patternLineNumber] + + -- unwrapUntilPatternMatches() will probably not unwrap a line if + -- the pattern does not represent the whole line (think about it); + -- even if it does, it will fail to detect the correct end of the + -- line (how could it?). Conversely, it may try to unwrap needlessly + -- if the pattern ends with something like ".+" (think about it too). + -- So, you should only use such patterns when the line can never be + -- wrapped. + local last, tmp = unwrapUntilPatternMatches(pat) + for _, val in ipairs(tmp) do table.insert(self.captures, val) end + + if last == nil then + io.stderr:write(" texlogsieve: parsing error\n") + dispatch(self.message) + self.doit = self.handleFirstLine + return true + end + + if self.patternLineNumber == 1 then + self.message.content = string.sub(Lines.current, 1, last) + else + self.message.content = self.message.content .. '\n' + .. string.sub(Lines.current, 1, last) + end + + Lines:handledChars(last) + + if self.patternLineNumber >= #self.patternLines then + self:processCaptures() + dispatch(self.message) + self.doit = self.handleFirstLine + else + self.patternLineNumber = self.patternLineNumber +1 + nextHandler = self + end + + return true +end + +-- When a pattern takes more than one line, we handle each +-- line separately. To do that, we need to transform the +-- multiline strings of the patterns into tables where each +-- line is an element. +function stringsHandler:init() + self.strictPatterns = {} + self.loosePatterns = {} + + for _, pat in ipairs(self.patterns) do + local patternLinesAsTableItems = linesToTable(pat) + table.insert(self.strictPatterns, patternLinesAsTableItems) + + -- remove the leading '^' + patternLinesAsTableItems = linesToTable(string.sub(pat, 2)) + table.insert(self.loosePatterns, patternLinesAsTableItems) + end + + self.patterns = self.strictPatterns +end + +-- The pattern we want to check may stretch over several lines. This +-- function recursively checks each line of the pattern against the +-- corresponding input line, but only up to three lines, as that is +-- enough to make sure the pattern really matches. +function stringsHandler:canDoitRecursive(patternLines, + position, offset, depth) + + local line + if position == nil then position = 0 end + line = Lines:get(position) + + -- skip what was processed in a previous iteration/recursion + if offset > 0 then line = string.sub(line, offset +1) end + + local nextline = "" + + local patternLine = patternLines[1] + + while true do + local first, last = string.find(line, patternLine) + local tmp = string.find(nextline, patternLine) -- see comment below + + if first ~= nil and tmp == nil then + -- Found it! + if depth > 2 -- 3 lines matched, that is enough + or #patternLines == 1 -- no more pattern lines + or Lines:get(position +1) == nil -- no more input lines + + then + return true, {first = first} + else + -- this line matches; check the next ones too just to make sure + if last < string.len(line) then + -- continue on the same line, skip what we already processed + offset = last + offset + else + position = position +1 -- proceed to next line... + offset = 0 -- ...starting at the beginning of the line + end + + depth = depth +1 + patternLines = {table.unpack(patternLines, 2)} + + local success = self:canDoitRecursive(patternLines, + position, offset, depth) + + return success, {first = first} + end + end + + -- no success, but can we unwrap this line? + if not Lines:seemsWrapped(position) then return false, {} end + -- yep! However, we need to be careful: if we match + -- on the next line by itself, then the match is not + -- the result of unwrapping, so we should return false. + -- We only return true if the match occurs only when + -- the lines are concatenated. Do not trust that the + -- pattern is anchored to the beginning of the line, + -- lookahead() changes this. + offset = -1 * string.len(line) + nextline = Lines:get(position +1) + line = line .. nextline + position = position +1 + end +end + +-- Just like :canDoit(), but does not anchor patterns to the +-- beginning of the line (used by handleUnrecognizedMessage). +-- Notice the similarity to openCloseHandlerPrototype:lookahead(). +function stringsHandler:lookahead() + self.patterns = self.loosePatterns + local match, data = self:canDoit() + self.patterns = self.strictPatterns + + return match, data +end + +function stringsHandler:processCaptures() + -- by default, do nothing +end + + +------------------------------------------------------------------------------- +-- beginningOfLineDebugStringsHandler +-- beginningOfLineInfoStringsHandler +-- beginningOfLineWarningStringsHandler +-- anywhereDebugStringsHandler +-- anywhereInfoStringsHandler +-- anywhereWarningStringsHandler +-- (from stringsHandler) +-- +-- they differ from the prototype only by severity level +-- and the set of patterns to search for. +------------------------------------------------------------------------------- + +-- We know these messages always start at the beginning of a line +-- Always start these patterns with "^", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +beginningOfLineDebugStringsHandler = stringsHandler:new() +beginningOfLineDebugStringsHandler.severity = DEBUG +beginningOfLineDebugStringsHandler.patterns = { + '^This is .*TeX, Version.*', + '^%s*restricted system commands enabled%.', + '^%s*entering extended mode', + '^%s*restricted \\write18 enabled%.', + '^%s*%%%&%-line parsing enabled%.', + '^%*%*[%w%.]+', -- "**jobname" + '^file:line:error style messages enabled%.', + '^\\[^%s=]+=[^%s=]+', -- "\c@chapter=\count174" + "^\\openout%d+%s*=%s*`?[^']+'?%.?", + + '^LaTeX2e <' .. datepat .. '>.*', + + '^Lua module: lualibs%-extended ' .. datepat + .. ' %S+ ConTeXt Lua libraries %-%- extended collection%.', + + '^Lua module: lualibs ' .. datepat + .. ' %S+ ConTeXt Lua standard libraries%.', + + '^Lua module: fontspec ' .. datepat + .. ' %S+ Font selection for XeLaTeX and LuaLaTeX', + + '^Lua module: lualatex%-math ' .. datepat + .. ' %S+ Patches for mathematics typesetting with LuaLaTeX', + + '^Lua module: luaotfload ' .. datepat + .. ' %S+ Lua based OpenType font support', + + '^luaotfload | init : Context OpenType loader version.*', + + '^luaotfload | init : Loading fontloader ' + .. '["“][^"]+["”] from .-["“][^"]+["”]%.', + + -- there may be dots in the path, so we need to + -- anchor the final dot to the end of the line + '^luaotfload | conf : Root cache directory is "?[^"]-"?%.$', + '^luaotfload | db : Font names database loaded from .-%.luc', + '^luaotfload | cache : Lookup cache loaded from .-%.luc%.', + '^luaotfload | main : initialization completed in [%d%.]+ seconds', + + '^Lua%-only attribute.-=%s*%S+', + "^Inserting %b`' at position .- in %b`'%.", + + "^For additional information on amsmath, use the `%?' option%.", + + "^Loading configuration file `" .. filepat .. "'%.", + "^contour: Using driver file `" .. filepat .. "'%.", + + '^ABD: EverySelectfont initializing macros', + '^ABD: EveryShipout initializing macros', + + '^%[Loading MPS to PDF converter %(version ' .. datepat .. '%)%.%]', + + + '^See the caption package documentation for explanation%.', + + '^Lua module: luaotfload%-main ' .. datepat + .. ' [%d%.]+ luaotfload entry point', + + '^Lua module: luaotfload%-init ' .. datepat + .. ' [%d%.]+ luaotfload submodule / initialization', + + '^Lua module: luaotfload%-log ' .. datepat + .. ' [%d%.]+ luaotfload submodule / logging', + + '^Lua module: luaotfload%-parsers ' .. datepat + .. ' [%d%.]+ luaotfload submodule / filelist', + + '^Lua module: luaotfload%-configuration ' .. datepat + .. ' [%d%.]+ luaotfload submodule / config file reader', + + '^Lua module: luaotfload%-loaders ' .. datepat + .. ' [%d%.]+ luaotfload submodule / callback handling', + + '^Lua module: luaotfload%-database ' .. datepat + .. ' [%d%.]+ luaotfload submodule / database', + + '^Lua module: luaotfload%-unicode ' .. datepat + .. ' [%d%.]+ luaotfload submodule / Unicode helpers', + + '^Lua module: luaotfload%-colors ' .. datepat + .. ' [%d%.]+ luaotfload submodule / color', + + '^Lua module: luaotfload%-resolvers ' .. datepat + .. ' [%d%.]+ luaotfload submodule / resolvers', + + '^Lua module: luaotfload%-features ' .. datepat + .. ' [%d%.]+ luaotfload submodule / features', + + '^Lua module: luaotfload%-letterspace ' .. datepat + .. ' [%d%.]+ luaotfload submodule / color', + + '^Lua module: luaotfload%-embolden ' .. datepat + .. ' [%d%.]+ luaotfload submodule / color', + + '^Lua module: luaotfload%-notdef ' .. datepat + .. ' [%d%.]+ luaotfload submodule / color', + + '^Lua module: luaotfload%-auxiliary ' .. datepat + .. ' [%d%.]+ luaotfload submodule / auxiliary functions', + + '^Lua module: luaotfload%-multiscript ' .. datepat + .. ' [%d%.]+ luaotfload submodule / multiscript', + + '^' .. string.rep('%*', 37) .. '\n%* Using libertinus math %*\n' + .. string.rep('%*', 37), + + '^`inconsolata%-zi4\' v%S-, ' .. datepat + .. ' Text macros for Inconsolata %(msharpe%)', + + '^Requested font ".-" at [%d%.]+pt\n %-> ' .. filepat, + '^Requested font ".-" scaled %d+\n %-> ' .. filepat, +} + + +-- These messages may start anywhere in a line +-- Always start these patterns with "^%s*", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +anywhereDebugStringsHandler = stringsHandler:new() +anywhereDebugStringsHandler.severity = DEBUG +anywhereDebugStringsHandler.patterns = { + '^%s*L3 programming layer %b<> xparse %b<>', + '^%s*%{.*pdftex%.map%}', + + -- + '^%s*%<' .. filepat .. ', id=.- [%d%.]+pt x [%d%.]+pt%>', + '^%s*%', -- + '^%s*%<' .. filepat .. '%>', -- +} + + +-- We know these messages always start at the beginning of a line +-- Always start these patterns with "^", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +beginningOfLineInfoStringsHandler = stringsHandler:new() +beginningOfLineInfoStringsHandler.severity = INFO +beginningOfLineInfoStringsHandler.patterns = { + "^Writing index file.*%.idx", + "^%*geometry%* driver:.*", + "^%*geometry%* detected driver:.*", + "^Driver file for pgf:.*%.def", + "^%s*file:line:error style messages enabled", + "^Applying: %b[] float order in 2%-column on input line .-%.", + "^Already applied: %b[] float order in 2%-column on input line .-%.", + "^\\%S+ = a dialect from .*", + -- TODO: we should capture the jobname and use it here + "^No file .-%.aux%.", + "^No file .-%.ind%.", + "^No file .-%.bbl%.", + "^reledmac reminder:%s*\n" + .. "%s*The number of the footnotes in this section " + .. "has changed since the last run.\n" + .. "%s*You will need to run LaTeX two more times " + .. "before the footnote placement\n" + .. "%s*and line numbering in this section are correct%.", +} + + +-- These messages may start anywhere in a line +-- Always start these patterns with "^%s*", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +anywhereInfoStringsHandler = stringsHandler:new() +anywhereInfoStringsHandler.severity = INFO +anywhereInfoStringsHandler.patterns = { + -- TODO: there are other "... patterns for blah blah" + -- in texmf-dist/tex/generic/hyph-utf8/loadhyph + "^%s*German Hyphenation Patterns %(Traditional Orthography%) " + .. "`dehyphts?%-x' " .. datepat .. " %(WL%)", + + '^%s*UTF%-8 German hyphenation patterns %(traditional orthography%)', + '^%s*EC German hyphenation patterns %(traditional orthography%)', + '^%s*German Hyphenation Patterns %(Traditional Orthography%)', + + "^%s*Swiss%-German Hyphenation Patterns %(Traditional Orthography%) " + .. "`dehyphts?%-x' " .. datepat .. " %(WL%)", + + '^%s*UTF%-8 Swiss%-German hyphenation patterns %(traditional orthography%)', + '^%s*EC Swiss%-German hyphenation patterns %(traditional orthography%)', + '^%s*Swiss%-German Hyphenation Patterns %(Traditional Orthography%)', + + '^%s*ASCII Hyphenation patterns for American English', + '^%s*UTF%-8 %S+ hyphenation patterns', + '^%s*EC %S+ hyphenation patterns', +} + + +-- We know these messages always start at the beginning of a line +-- Always start these patterns with "^", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +beginningOfLineWarningStringsHandler = stringsHandler:new() +beginningOfLineWarningStringsHandler.severity = WARNING +beginningOfLineWarningStringsHandler.patterns = { + '^luaotfload | aux : font no .- does not define feature ' + .. '.- for script .- with language %S+', + + '^luaotfload | aux : font no .- %b() defines no feature for script %S+', + '^luaotfload | aux : no font with id %d+', + + "^warning %(pdf backend%): ignoring duplicate destination " + .. "with the name '%-%.'", + + "^Couldn't patch \\%S+", + "^Invalid UTF%-8 byte or sequence at line %d+ replaced by U%+FFFD%.", + + '^Requested font ".-" at [%d%.]+pt\n' + .. "Unknown feature %b`' in font %b`'%.\n" + .. ' %-> ' .. filepat, +} + + +-- These messages may start anywhere in a line +-- Always start these patterns with "^%s*", see lookahead(). +-- Order matters! The first match wins, so the longer ones should come first. +anywhereWarningStringsHandler = stringsHandler:new() +anywhereWarningStringsHandler.severity = WARNING +anywhereWarningStringsHandler.patterns = { +} + + +------------------------------------------------------------------------------- +-- missingCharHandler +-- (from stringsHandler) +-- +-- this differs from the prototype by severity level, the set of +-- patterns to search for, and because it uses a different kind of +-- Message object (we want to summarize missing characters specially) +------------------------------------------------------------------------------- + +missingCharHandler = stringsHandler:new() +missingCharHandler.severity = CRITICAL + +missingCharHandler.patterns = { + '^Missing character: There is no .- in font .*!', +} + +function missingCharHandler:newMessage() + return missingCharMessage:new() +end + + +------------------------------------------------------------------------------- +-- genericLatexHandler +-- +-- Messages generated by GenericInfo, PackageWarning etc., such as +-- +-- Package babel Info: \l@canadian = using hyphenrules for english +-- (babel) (\language0) on input line 102. +-- +-- or +-- +-- LaTeX Info: Redefining \setlength on input line 80. +-- +-- These messages always start at the beginning of a line and end at the +-- end of a line. There may be more than one line; subsequent lines have +-- a specific prefix derived from the package/class name (which can be +-- obtained from the first line). We look for this prefix to detect such +-- subsequent lines. +------------------------------------------------------------------------------- + +genericLatexHandler = HandlerPrototype:new() + +genericLatexHandler.patterns = { + "^(Package)%s+(%S+)%s+(%S+): ", + "^(Class)%s+(%S+)%s+(%S+): ", + "^(LaTeX)%s+(%S+)%s+(%S+): ", + "^(Module)%s+(%S+)%s+(%S+): ", -- Only ever saw "Module microtype Info" + "^(Package)%s+(%S+)%s+(notification) ", -- pgfplots does this +} + +function genericLatexHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local last, data + + for _,pattern in ipairs(self.patterns) do + -- Because this is a prototype that may be used with + -- other patterns, we do not know how many captures + -- are there in the pattern; put them all in a table + data = {string.find(line, pattern)} + table.remove(data, 1) -- remove "first" + last = data[1] + if last ~= nil then break end + end + + if last == nil then + return false, {} + else + return true, data + end +end + +function genericLatexHandler:unpackData(data) + local last = data[1] + local what = data[2] + local name = data[3] + local severity = data[4] + self.message.what = what + self.message.name = name + self.message.severity = self:parseSeverity(severity) + self.message.content = Lines.current + + self:findPrefix(last, name, what) + self.message.prefix = self.prefix +end + +function genericLatexHandler:handleFirstLine() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + self:unwrapLines() + + -- erase any previous values; nil is not a good idea! If one of these + -- is nil in a derived object, the object may grab the value of the + -- parent object from some previous message. + self.linenum = "" + self.prefix = "" + + self.message = self:newMessage() + self.message.content = "" + self.message.severity = self.severity + self:unpackData(data) -- process whatever canDoit() gave us + + self:extractLinenum() + Lines:handledChars() + + self.doit = self.handleOtherLines + nextHandler = self + return true +end + +genericLatexHandler.doit = genericLatexHandler.handleFirstLine + +function genericLatexHandler:handleOtherLines() + local _, last = string.find(Lines.current, '^' .. self.prefix) + + if last ~= nil then + self:unwrapLines() + Lines:handledChars(last) + self:extractLinenum() + + self.message.content = self.message.content .. '\n' .. Lines.current + + Lines:handledChars() + nextHandler = self + else + self.doit = self.handleFirstLine + if self.linenum ~= "" then + self.message.linenum = self.linenum + end + self:adjustSeverity() + dispatch(self.message) + end + + return true +end + +function genericLatexHandler:findPrefix(lastcol, name, what) + -- continuation lines look like + -- ^(pkgname) [padding spaces] blah blah + -- let's find out how many spaces and + -- build the pattern for the prefix + + local numspaces + + if name ~= nil then + name = "(" .. name .. ")" + numspaces = lastcol - string.len(name) + self.prefix = protect_metachars(name) + else + self.prefix = "" + numspaces = lastcol + end + + self.prefix = self.prefix .. string.rep(" ", numspaces) +end + +function genericLatexHandler:extractLinenum() + if self.linenum ~= "" then return end + + _, _, self.linenum = string.find(Lines.current, "on input line (%d+)%.") + if self.linenum ~= "" then return end + + -- LaTeX3-style messages (with \msg_something) + _, _, self.linenum = string.find(Lines.current, "on line (%d+)$") +end + +function genericLatexHandler:parseSeverity(severity) + if severity == nil or severity == "" then return self.severity end + + severity = string.lower(severity) + + -- tocbibind uses "Note" + if severity == 'info' + or severity == 'notification' + or severity == 'note' + then + return INFO + else + return WARNING + end +end + +-- similar to HandlerPrototype:unwrapLines(), but with extra checks +function genericLatexHandler:unwrapLines() + while Lines:seemsWrapped() do + -- The current line is the right length and other handlers do + -- not know how to handle the next line, but we still need to + -- check another possibility: the next line might be a "normal" + -- continuation line + local first = string.find(Lines:get(1), '^' .. self.prefix) + if first ~= nil then break end + + -- Ok, this is almost certainly a wrapped line, but it does + -- not hurt to also check this just in case + first = string.find(Lines.current, 'on input line %d+%.$') + if first ~= nil then break end + + Lines:unwrapOneLine() + end +end + +-- LaTeX only uses severity "INFO" and "WARNING", which +-- is very limited. Let's demote some warnings to INFO +-- and promote some others to CRITICAL. +function genericLatexHandler:adjustSeverity() + for _, pat in ipairs(self.downgradePatterns) do + local first = string.find(self.message.content, pat) + if first ~= nil then + self.message.severity = INFO + break + end + end + + for _, pat in ipairs(self.upgradePatterns) do + local first = string.find(self.message.content, pat) + if first ~= nil then + self.message.severity = CRITICAL + break + end + end +end + +genericLatexHandler.downgradePatterns = { + -- No need to include the full message + "File %b`' already exists on the system%." + .. "%s*Not generating it from", + "You have requested package %b`'," + .. "%s*but the package provides", + "Writing file %b`'", + "Form Feed has been converted to Blank", + "Tab has been converted to Blank", + "The morewrites package is unnecessary", + 'Unused \\captionsetup%b[]', +} + +genericLatexHandler.upgradePatterns = { + "Label %b`' multiply defined", + "Command .- invalid in math mode", + "Optional argument of \\twocolumn too tall on page", + "Marginpar on page %S- moved", + "Some font shapes were not available, defaults substituted%.", + "Font shape %b`' in size %b<> not available" + .. "%s+Font shape %b`' tried instead", + "Font shape %b`' in size %S+ not available" + .. "%s+external font %b`' used", + "Font shape %b`' undefined" + .. "%s+using %b`' instead", +} + + +------------------------------------------------------------------------------- +-- latex23MessageHandler +-- genericLatexVariantHandler +-- (from genericLatexHandler) +-- +-- They differ from the prototype by the set of patterns to search for and by +-- the unpackData() method, which deals with the specific pattern captures +-- defined in the search patterns. +------------------------------------------------------------------------------- + +latex23MessageHandler = genericLatexHandler:new() + +latex23MessageHandler.patterns = { + "^(LaTeX3?)%s+(%S+): " +} + +function latex23MessageHandler:unpackData(data) + local last = data[1] + local what = data[2] + local severity = data[3] + self.message.severity = self:parseSeverity(severity) + self.message.what = what + self.message.content = Lines.current + + local name + -- When the message looks like "LaTeX...", there is no package + -- name, but with "LaTeX3...", that is used as the name + if what == 'LaTeX3' then name = 'LaTeX3' end + + self:findPrefix(last, name, what) + self.message.prefix = self.prefix +end + +genericLatexVariantHandler = genericLatexHandler:new() + +genericLatexVariantHandler.patterns = { + "^(Package) (%S+) (%S+) on input line (%S+): ", +} + +function genericLatexVariantHandler:unpackData(data) + local last = data[1] + local what = data[2] + local name = data[3] + local severity = data[4] + self.linenum = data[5] + self.message.what = what + self.message.name = name + self.message.severity = self:parseSeverity(severity) + self.message.content = Lines.current + + self:findPrefix(last, name, what) + self.message.prefix = self.prefix +end + + +------------------------------------------------------------------------------- +-- citationHandler +-- referenceHandler +-- labelHandler +-- (from genericLatexHandler) +-- +-- They differ from the prototype by the set of patterns to search for, by +-- the unpackData() method, and by the message type generated, because we +-- want to generate dedicated summaries for them +------------------------------------------------------------------------------- +citationHandler = genericLatexHandler:new() + +citationHandler.patterns = { + "^(LaTeX)%s+(Warning): (Citation) (%b`') on page (.-) undefined", + "^(LaTeX)%s+(Warning): (Citation) (%b`') undefined", +} + +function citationHandler:unpackData(data) + local last = data[1] + local what = data[2] + local severity = data[3] + local name = data[4] + local key = string.sub(data[5], 2, -2) -- remove quotes + local page = data[6] -- may be null + + self.message.what = what + self.message.name = name + self.message.severity = self:parseSeverity(severity) + self.message.key = key + self.message.page = page + self.message.content = Lines.current + self:findPrefix(last, nil, what) + self.message.prefix = self.prefix +end + +function citationHandler:newMessage() + return citationMessage:new() +end + +referenceHandler = citationHandler:new() + +referenceHandler.patterns = { + "^(LaTeX)%s+(Warning): (Reference) (%b`') on page (.-) undefined", +} + +function referenceHandler:newMessage() + return referenceMessage:new() +end + +labelHandler = citationHandler:new() + +labelHandler.patterns = { + "^(LaTeX)%s+(Warning): (Label) (%b`') multiply defined", +} + +function labelHandler:newMessage() + return labelMessage:new() +end + + +------------------------------------------------------------------------------- +-- providesHandler +-- (from genericLatexHandler) +-- +-- Handles the lines generated by the \Provides* LaTeX commands, such as: +-- +-- Package: etoolbox 2020/10/05 v2.5k e-TeX tools for LaTeX (JAW) +-- +-- or +-- +-- File: size11.clo 2020/04/10 v1.4m Standard LaTeX file (size option) +-- +-- There is code to specifically handle a hardcoded line break +-- in a few packages (atbegshi-ltx, atveryend-ltx etc.) +------------------------------------------------------------------------------- + +providesHandler = genericLatexHandler:new() +providesHandler.severity = INFO + +providesHandler.patterns = { + "^(Document Class):%s+(%S+)%s+", + "^(Package):%s+(%S+)%s+", + "^(File):%s+(%S+)%s+", + "^(Language):%s+(%S+)%s+", -- this and the next come from babel + "^(Dictionary):%s+(%S+)%s+" +} + +function providesHandler:unpackData(data) + local last = data[1] + local what = data[2] + local name = data[3] + + self.message.what = what + self.message.name = name + self.message.content = Lines.current + + -- There are no continuation lines of this kind for + -- these messages, but the generic code still wants + -- to check for the prefix. + self.prefix = '[^%s%S]+' -- nothing matches + + if not Lines:empty() then + local first = string.find(Lines:get(1), 'with kernel methods') + if first ~= nil then + self.message.content = self.message.content .. ' ' .. Lines:get(1) + Lines:gotoNextLine() + end + end + self.message.content = string.gsub(self.message.content, + '%s*with kernel methods', ' with kernel methods') +end + + +------------------------------------------------------------------------------- +-- geometryDetailsHandler +-- (from genericLatexHandler) +-- +-- Handles the output from the geometry package with the "verbose" option. +-- Iinheriting from genericLatexHandler is a little hackish, since +-- the message does not really fit the "standard" message format (we define +-- the prefix statically instead of computing it from the message itself), +-- but works well and is simple. +------------------------------------------------------------------------------- + +geometryDetailsHandler = genericLatexHandler:new() +geometryDetailsHandler.severity = INFO + +geometryDetailsHandler.patterns = { + '^%*geometry%* verbose mode', +} + +function geometryDetailsHandler:unpackData(data) + self.message.name = 'geometry' + self.message.content = Lines.current + self.prefix = '* ' + self.message.prefix = self.prefix +end + +------------------------------------------------------------------------------- +-- openParensHandler +-- closeParensHandler +-- openSquareBracketHandler +-- closeSquareBracketHandler +-- +-- These determine whether the chars "(", ")", "[", and "]" are ordinary +-- characters or if they indicate open/close file or begin/end shipout. +-- Detecting files allows us to filter the output according to which file +-- is being processed; detecting shipouts allows us to indicate the page +-- that a message originated from. +-- +-- Although openParensHandler is very similar to openSquareBracketsHandler +-- and closeParensHandler is very similar to closeSquareBracketsHandler, +-- we decided not to use inheritance to reuse the code (except for the +-- lookahead() method). We would avoid a little repetition, but the code +-- size would probably be the same and it would be more complex. +-- +-- The fact that the code is similar may seem a little odd at first: While +-- the openFiles stack may contain many entries (because an open file may +-- request to open another file etc.), the same is obviously not true for +-- the shipouts stack. Still, we use a stack too because we need to handle +-- "[" and "]" characters that do not correspond to real shipouts, just +-- like we do with "(" and ")". +------------------------------------------------------------------------------- + +openCloseHandlerPrototype = HandlerPrototype:new() + +-- Just like :canDoit(), but does not anchor patterns to the +-- beginning of the line (used by handleUnrecognizedMessage). +-- Notice the similarity to stringsHandler:lookahead(). +function openCloseHandlerPrototype:lookahead() + self.pattern = self.loosePattern + match, data = self:canDoit() + self.pattern = self.strictPattern + + return match, data +end + +openParensHandler = openCloseHandlerPrototype:new() + +openParensHandler.strictPattern = "^(%s*)%(" +openParensHandler.loosePattern = "%s*%(" +openParensHandler.pattern = openParensHandler.strictPattern + +function openParensHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first, last = string.find(line, self.pattern) + if first == nil then return false, {} end + + line = string.sub(line, last +1) + + local filename = guessFilename(position) + + return true, {first = first, filename = filename} -- might be nil +end + +function openParensHandler:doit() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + local _, last, spaces = string.find(Lines.current, self.pattern) + unrecognizedBuffer = unrecognizedBuffer .. spaces + + -- skip the spaces and the open parens character + Lines:handledChars(last) + + if data.filename ~= nil then + flushUnrecognizedMessages() + local last = unwrapUntilStringMatches(data.filename) + if last == nil then + io.stderr:write(" texlogsieve: parsing error\n") + else + Lines:handledChars(last) + end + openFiles:push(data.filename) + mute = currentFileIsSilenced() + local msg = openFileMessage:new() + msg.severity = DEBUG + msg.filename = data.filename + msg.content = "Open file " .. data.filename + dispatch(msg) + else + openFiles:push("DUMMY") + unrecognizedBuffer = unrecognizedBuffer .. "(" + end + + return true +end + +closeParensHandler = openCloseHandlerPrototype:new() + +closeParensHandler.strictPattern = "^(%s*)%)" +closeParensHandler.loosePattern = "%s*%)" +closeParensHandler.pattern = closeParensHandler.strictPattern + +function closeParensHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first = string.find(line, self.pattern) + if first == nil then return false, {} end + + return true, {first = first} +end + +function closeParensHandler:doit() + local myTurn = self:canDoit() + if not myTurn then return false end + + local _, last, spaces = string.find(Lines.current, self.pattern) + unrecognizedBuffer = unrecognizedBuffer .. spaces + + -- skip the spaces and the close parens character + Lines:handledChars(last) + + local filename = openFiles:pop() + if filename == nil or filename == "DUMMY" then + unrecognizedBuffer = unrecognizedBuffer .. ")" + else + flushUnrecognizedMessages() + local msg = closeFileMessage:new() + msg.severity = DEBUG + msg.content = "Close file " .. filename + dispatch(msg) + mute = currentFileIsSilenced() + end + + return true +end + +openSquareBracketHandler = openCloseHandlerPrototype:new() + +openSquareBracketHandler.strictPattern = "^(%s*)%[" +openSquareBracketHandler.loosePattern = "%s*%[" +openSquareBracketHandler.pattern = openSquareBracketHandler.strictPattern + +function openSquareBracketHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first, last = string.find(line, self.pattern) + if first == nil then return false, {} end + + line = string.sub(line, last +1) + + local latexPage = guessShipoutPage(position) + + return true, {first = first, latexPage = latexPage} -- may be nil +end + +function openSquareBracketHandler:doit() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + local _, last, spaces = string.find(Lines.current, self.pattern) + unrecognizedBuffer = unrecognizedBuffer .. spaces + + -- skip the spaces and the open square bracket character + Lines:handledChars(last) + + if data.latexPage ~= nil then + flushUnrecognizedMessages() + local last = unwrapUntilStringMatches(data.latexPage) + if last == nil then + io.stderr:write(" texlogsieve: parsing error\n") + else + Lines:handledChars(last) + end + shipouts:push(data.latexPage) + numShipouts = numShipouts +1 + table.insert(latexPages, numShipouts, data.latexPage) + local msg = beginShipoutMessage:new() + msg.physicalPage = numShipouts + dispatch(msg) + else + shipouts:push("DUMMY") + unrecognizedBuffer = unrecognizedBuffer .. "[" + end + + return true +end + +closeSquareBracketHandler = openCloseHandlerPrototype:new() + +closeSquareBracketHandler.strictPattern = "^(%s*)%]" +closeSquareBracketHandler.loosePattern = "%s*%]" +closeSquareBracketHandler.pattern = closeSquareBracketHandler.strictPattern + +function closeSquareBracketHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first = string.find(line, self.pattern) + if first == nil then return false, {} end + + return true, {first = first} +end + +function closeSquareBracketHandler:doit() + local myTurn = self:canDoit() + if not myTurn then return false end + + local _, last, spaces = string.find(Lines.current, self.pattern) + unrecognizedBuffer = unrecognizedBuffer .. spaces + + -- skip the spaces and the close square bracket character + Lines:handledChars(last) + + local latexPage = shipouts:pop() + if latexPage == nil or latexPage == "DUMMY" then + unrecognizedBuffer = unrecognizedBuffer .. "]" + else + flushUnrecognizedMessages() + local msg = endShipoutMessage:new() + msg.physicalPage = numShipouts + dispatch(msg) + end +end + + +------------------------------------------------------------------------------- +-- utf8FontMapHandler +-- +-- This handles the encoding-related multi-line messages generated by +-- inputenc/fontenc with pdftex and utf8, similar to: +-- +-- Now handling font encoding LS1 ... +-- ... no UTF-8 mapping file for font encoding LS1 +-- +-- or +-- +-- Now handling font encoding LY1 ... +-- ... processing UTF-8 mapping file for font encoding LY1 +-- defining Unicode char U+00A0 (decimal 160) +-- +-- We could handle these by inheriting from genericLatexHandler, which +-- might be a good idea as this handler is quite complex. Still, the +-- advantage of this handler is that it groups the first lines (that +-- indicate the encoding) and the continuation lines as a unit, even +-- though there are other messages in between that are handled by other +-- handlers. We use two strategies to deal with continuation lines to +-- accomplish this: +-- +-- 1. After the first line, we change the self.doit method and define +-- ourselves as nextHandler, because we know the next line "belongs" +-- to us (nothing new here, genericLatexHandler does this too) +-- +-- 2. After the second line, we do not know whether the next line "belongs" +-- to us (actually, it most likely does not). So, we just change the +-- self.doit method and wait to be called by chooseHandler() again a +-- few lines down the road. When one of the patterns we are looking for +-- matches, we are back in business. This is why handleOtherLines must +-- check for the base "Now handling font encoding" pattern too: there +-- might not be continuation lines and we need to handle a new message +-- instead at some other point in the input file. +------------------------------------------------------------------------------- + +utf8FontMapHandler = HandlerPrototype:new() + +-- we repeat here the tests we make on the other methods of this +-- object, which is somewhat dirty. +function utf8FontMapHandler:canDoit(position) + local line + if position == nil then position = 0 end + line = Lines:get(position) + + local first, encoding + if self.doit == self.handleFirstLine then + first, _, encoding = string.find(line, + "^Now handling font encoding (%S+) %.%.%.") + elseif self.doit == self.handleSecondLine then + first = string.find(line, + "^%.%.%. no UTF%-8 mapping file for font encoding") + + if first == nil then + first = string.find( + "^%.%.%. processing UTF%-8 mapping file for font encoding") + end + else + first = string.find(line, "^%s*defining Unicode char") + end + + if first == nil then + return false, {} + else + return true, {encoding = encoding} + end +end + +function utf8FontMapHandler:handleFirstLine() + local myTurn, data = self:canDoit() + if not myTurn then return false end + + flushUnrecognizedMessages() + self.message = Message:new() + self.message.severity = DEBUG + self.message.content = Lines.current + self.message.encoding = data.encoding + Lines:handledChars() + self.encoding = data.encoding + self.doit = self.handleSecondLine + nextHandler = self + return true +end + +utf8FontMapHandler.doit = utf8FontMapHandler.handleFirstLine + +function utf8FontMapHandler:handleSecondLine() + local first = string.find(Lines.current, + "^%.%.%. no UTF%-8 mapping file for font encoding") + + if first ~= nil then + self.message.content = self.message.content .. '\n' .. Lines.current + Lines:handledChars() + dispatch(self.message) + self.doit = self.handleFirstLine + return true + end + + first = string.find(Lines.current, + "^%.%.%. processing UTF%-8 mapping file for font encoding") + + if first ~= nil then + self.message.content = self.message.content .. '\n' .. Lines.current + Lines:handledChars() + self.doit = self.handleOtherLines + self.numTries = 0 + self.foundOtherLines = false + return true + end + + -- The second line was neither "no UTF-8 mapping..." nor + -- "processing UTF-8 mapping" - this should never happen + dispatch(self.message) + io.stderr:write(" texlogsieve: parsing error\n") + Lines:handledChars() + self.doit = self.handleFirstLine + return true +end + +-- Between handleSecondLine and handleOtherLines there usually are two +-- messages: "open file ENCenc.dfu" and "ProvidesFile ENCenc.dfu". +-- Therefore, we try to find the first "...defining Unicode char" +-- message for the following 4 lines before giving up. +function utf8FontMapHandler:handleOtherLines() + local first = string.find(Lines.current, "^%s*defining Unicode char") + + if first ~= nil then + flushUnrecognizedMessages() + self.foundOtherLines = true + self.message.content = self.message.content .. '\n' .. Lines.current + Lines:handledChars() + nextHandler = self + return true + end + + -- this line does not match; why? First possibility: there are no + -- "...defining Unicode char" lines to be found; instead, there is + -- another encoding being defined. This obviously should not happen + first = string.find(Lines.current, + "^Now handling font encoding (%S+) %.%.%.") + + if first ~=nil then + -- give up and start processing the new message (should not happen) + dispatch(self.message) + flushUnrecognizedMessages() + io.stderr:write(" texlogsieve: parsing error\n") + + self.numTries = 0 + self.foundOtherLines = false + self.doit = self.handleFirstLine + return self:handleFirstLine() + end + + -- second possibility: we have not yet reached the first "...defining + -- Unicode char" message, but we want to try again in the next line + if not self.foundOtherLines and self.numTries < 4 then + self.numTries = self.numTries +1 + return false, {} -- we will try again later; for now, call chooseHandler() + end + + -- third possibility: we never reached any "...defining Unicode char" line + -- but we already tried for too many lines (more than 4), so give up and + -- do nothing (we might output a "parsing error" message, but that is + -- probably unnecessary) + + -- fourth possibility: we already found all lines, so + -- we are done and there is no need to do anything else + + -- wrap up for the third and fourth possibilities + dispatch(self.message) + self.doit = self.handleFirstLine + self.numTries = 0 + self.foundOtherLines = false + return true +end + + +--[[ ##################################################################### ]]-- +--[[ ############################# MESSAGES ############################## ]]-- +--[[ ##################################################################### ]]-- + +Message = {} + +function Message:new() + local o = {} + setmetatable(o, self) + self.__index = self + o.mute = mute + o.content = "" + o.prefix = "" + if openFiles ~= nil and not openFiles:empty() then + o.filename = openFiles:peek() + end + return o +end + +Message.severity = UNKNOWN + +function Message:toString() + if self.mute then return "" end + + -- If we've already been here, just output the previous result + if self.formatted ~= nil then return self.formatted end + + self.formatted = self:realToString() + if trim(self.formatted) == "" then self.formatted = "" return "" end + + for _, val in ipairs(SILENCE_STRINGS) do + local first = string.find(self.formatted, val) + local other = string.find(self.content, val) + if first ~= nil or other ~= nil then self.formatted = "" return "" end + end + + if self.name ~= nil then + for _, val in ipairs(SILENCE_PKGS) do + if self.name == val then self.formatted = "" return "" end + end + end + + if self.severity < MINLEVEL then self.formatted = "" return "" end + + return self.formatted +end + +function Message:realToString() + if self.prefix == "" then return self.content end + + local lines = linesToTable(self.content) + local msg = table.remove(lines, 1) + for _, line in ipairs(lines) do + msg = msg .. '\n' .. unprotect_metachars(self.prefix) .. line + end + return msg +end + +function Message:toSummary() + local formatted = self:toString() + if string.len(trim(formatted)) == 0 then return end + + repetitionsSummary:add(self) +end + + +function currentFileIsSilenced() + if openFiles:empty() then return false end + + local filename = openFiles:peek() + local _, last = string.find(filename, '^.*/') -- get just the basename + if last ~= nil then filename = string.sub(filename, last +1) end + for _, pattern in ipairs(SEMISILENCE_FILES) do + local first = string.find(filename, pattern) + if first ~= nil then return true end + end + + -- This is O(n*m) and gets executed for every message, + -- but "n" and "m" are unlikely to grow much beyond 10. + for _, filename in ipairs(openFiles) do + -- get just the basename + local basename = filename + local _, last = string.find(basename, '^.*/') + if last ~= nil then basename = string.sub(basename, last +1) end + + for _, pattern in ipairs(SILENCE_FILES_RECURSIVE) do + _, last = string.find(basename, pattern) + if last ~= nil then return true end + end + end + + return false +end + + +beginShipoutMessage = Message:new() +function beginShipoutMessage:realToString() + if not SHOW_SHIPOUTS then return "" end + + if RAW then return '[' .. latexPages[self.physicalPage] end + + return "" +end + + +endShipoutMessage = Message:new() +endShipoutMessage.shipout = true +function endShipoutMessage:realToString() + if not SHOW_SHIPOUTS then return "" end + + if RAW then return ']' end + + -- print counter as [cnt], just as LaTeX does. With that, if a program is + -- monitoring output, it can show some sort of progress bar to the user + local msg = 'shipout - physical page ' .. self.physicalPage + .. ', LaTeX page counter [' + .. latexPages[self.physicalPage] .. ']' + + return msg +end + + +openFileMessage = Message:new() +function openFileMessage:realToString() + if RAW then return "(" .. self.filename end + + return Message.realToString(self) +end + + +closeFileMessage = Message:new() +function closeFileMessage:realToString() + if RAW then return ")" end + + return Message.realToString(self) +end + + +underOverMessage = Message:new() +underOverMessage.severity = WARNING +function underOverMessage:realToString() + local tmp = self.content + if self.failedText ~= nil then + if not RAW then tmp = tmp .. '\nOffending text:' end + tmp = tmp .. '\n' .. self.failedText .. '\n' + end + + -- in raw mode, add the final "[]" + if RAW and self.closing ~= nil then + tmp = tmp .. ' ' .. self.closing .. '\n' + end + + return tmp +end + +function underOverMessage:toSummary() + underOverSummary:add(self) +end + + +missingCharMessage = Message:new() + +-- This is a hack: it would be too painful to define +-- pattern captures in the handler, so we do this here +function missingCharMessage:realToString() + if self.char == nil then + _, _, self.char, self.font = string.find(self.content, + '^Missing character: There is no (.-) in font (.*)!') + end + + return self.content +end + +function missingCharMessage:toSummary() + missingCharSummary:add(self) +end + + +citationMessage = Message:new() +function citationMessage:toSummary() + citationsSummary:add(self) +end + +referenceMessage = Message:new() +function referenceMessage:toSummary() + referencesSummary:add(self) +end + +labelMessage = Message:new() +function labelMessage:toSummary() + labelsSummary:add(self) +end + + +--[[ ##################################################################### ]]-- +--[[ ############################ SUMMARIES ############################## ]]-- +--[[ ##################################################################### ]]-- + +-- A Summary handles a class of messages (for example, undefined citations). +-- Some of these messages may be repeated (such as one specicic undefined +-- citation that appears multiple times). We want to mention each repeated +-- group as a single item ("citation blah undefined in pages X, Y, and Z"). +-- Therefore, we make self.messages a list of lists: Each "sub-list" holds +-- the messages that correspond to a specific message content (such as a +-- specific undefined citation). +SummaryPrototype = {} + +function SummaryPrototype:new() + local o = {} + setmetatable(o, self) + self.__index = self + o.messages = {} + o.header = "" + return o +end + +function SummaryPrototype:add(msg) + -- group messages by message content + local formatted = msg:toString() + + if self.messages[formatted] == nil then + self.messages[formatted] = {} + end + + table.insert(self.messages[formatted], msg) +end + +function SummaryPrototype:toString() + -- check if the table is empty - https://stackoverflow.com/a/1252776 + if next(self.messages) == nil then return "" end + + local text = self:processAllMessages() + + if text == "" then return "" end -- happens with repetitionsSummary + + return self.header .. text +end + +-- as mentioned above, self.messages holds a list of lists, such as +-- all the "undefined reference blah" messages in one sublist and +-- all the "undefined reference bleh" messages in another; process +-- each sublist separately and concatenate the results. We sort +-- because otherwise the order of the reports changes with each +-- execution, which makes comparing outputs harder. +function SummaryPrototype:processAllMessages() + local allText = "" + for _, messagesSublist in pairsSortedByKeys(self.messages) do + local tmp = self:processSingleMessageList(messagesSublist) + if tmp ~= "" then + allText = allText .. '\n\n' .. tmp + end + end + + -- remove leading '\n\n' + return string.sub(allText, 3) +end + +-- This is where we process each individual sublist, generating +-- something like "undefined reference blah in pages X, Y Z". +-- This obviously depends on the type of summary. +function SummaryPrototype:processSingleMessageList(messages) + return "" +end + +-- This receives a list of (equal) messages and returns +-- the list of pages and files where they were found. +function SummaryPrototype:pageAndFileList(messages) + + -- Build a Set with the page numbers to eliminate repetitions... + local pages = {} + local files = {} + for _, msg in ipairs(messages) do + pages[msg.physicalPage] = true + if msg.filename ~= nil then + files[msg.filename] = true + end + end + + -- and convert it to a "normal" table so we can sort it + local tmp = {} + for page, _ in pairs(pages) do -- not ipairs! + table.insert(tmp, page) + end + pages = tmp + table.sort(pages) + + tmp = {} + for file, _ in pairs(files) do + table.insert(tmp, file) + end + files = tmp + table.sort(files) + + -- Now turn these into strings + tmp = "" + for _, page in ipairs(pages) do + tmp = tmp .. ", " .. page + end + pages = tmp + + local _, last = string.find(pages, '^, ') + if last ~= nil then pages = string.sub(pages, last +1) end + + local tmp = "" + for _, file in ipairs(files) do + tmp = tmp .. ", " .. file + end + files = tmp + + local _, last = string.find(files, '^, ') + if last ~= nil then files = string.sub(files, last +1) end + + return pages, files +end + + +repetitionsSummary = SummaryPrototype:new() +repetitionsSummary.header = 'Repeated messages:\n' + +function repetitionsSummary:toString() + if not SILENCE_REPETITIONS then return "" end + + return SummaryPrototype.toString(self) +end + +function repetitionsSummary:processSingleMessageList(messages) + local text = "" + if #messages > 1 then + local pages, files = self:pageAndFileList(messages) + local content = messages[1]:toString() + + text = content .. '\n' + .. 'in pages ' .. pages + .. " (files " .. files .. ") - " + .. #messages .. ' repetitions' + end + + return text +end + + +missingCharSummary = SummaryPrototype:new() +missingCharSummary.header = 'Missing characters:\n' + +function missingCharSummary:processSingleMessageList(messages) + local text = "" + local pages, files = self:pageAndFileList(messages) + local char = messages[1].char + local font = messages[1].font + + text = 'char ' .. char .. ', font ' .. font .. '\n' + .. 'in pages ' .. pages .. " (files " .. files .. ")" + + return text +end + + +citationsSummary = SummaryPrototype:new() +citationsSummary.header = 'Undefined citations:\n' + +function citationsSummary:add(msg) + -- group messages by problem key. We do not use msg:toString() + -- here because some messages may include the page number, making + -- messages that are otherwise the same appear to be different. + local key = msg.key + + if self.messages[key] == nil then + self.messages[key] = {} + end + + table.insert(self.messages[key], msg) +end + +function citationsSummary:processSingleMessageList(messages) + local text = "" + local pages, files = self:pageAndFileList(messages) + local key = messages[1].key + + text = key .. '\n' + .. 'in pages ' .. pages .. " (files " .. files .. ")" + + return text +end + + +referencesSummary = citationsSummary:new() +referencesSummary.header = 'Undefined references:\n' + + +labelsSummary = citationsSummary:new() +labelsSummary.header = 'Multiply defined labels:\n' + + +-- This is a little different from the others; we do not want to +-- treat different messages differently, only report that there were +-- under/overfull boxes in pages X, Y, and Z. So we store messages +-- directly in self.messages instead of using sublists. +underOverSummary = SummaryPrototype:new() + +function underOverSummary:add(msg) + table.insert(self.messages, msg) +end + +function underOverSummary:toString() + if #self.messages == 0 then return "" end + + local pages, files = self:pageAndFileList(self.messages) + + return "Under/overfull boxes in pages " + .. pages .. " (files " .. files .. ")" +end + + +--[[ ##################################################################### ]]-- +--[[ ########################## AUXILIARY STUFF ########################## ]]-- +--[[ ##################################################################### ]]-- + +function protect_metachars(s) + s = string.gsub(s, "%%", "%%%%") + s = string.gsub(s, "%(", "%%(") + s = string.gsub(s, "%)", "%%)") + s = string.gsub(s, "%.", "%%.") + s = string.gsub(s, "%+", "%%+") + s = string.gsub(s, "%-", "%%-") + s = string.gsub(s, "%*", "%%*") + s = string.gsub(s, "%?", "%%?") + s = string.gsub(s, "%[", "%%[") + s = string.gsub(s, "%^", "%%^") + s = string.gsub(s, "%$", "%%$") + return s +end + +function unprotect_metachars(s) + s = string.gsub(s, "%%%$", "$") + s = string.gsub(s, "%%%^", "^") + s = string.gsub(s, "%%%[", "[") + s = string.gsub(s, "%%%?", "?") + s = string.gsub(s, "%%%*", "*") + s = string.gsub(s, "%%%-", "-") + s = string.gsub(s, "%%%+", "+") + s = string.gsub(s, "%%%.", ".") + s = string.gsub(s, "%%%)", ")") + s = string.gsub(s, "%%%(", "(") + s = string.gsub(s, "%%%%", "%%") + return s +end + +function trim(s) return (string.gsub(s, '^%s*(.-)%s*$', '%1')) end + +function stringToPattern(s) + local first, _ = string.find(s, '^////') + local pat + if first ~= nil then + pat = string.sub(s, 5) + else + pat = protect_metachars(s) + pat = string.gsub(pat, "%s+", "%%s+") + end + + return pat +end + +-- Given a string with multiple lines, returns +-- a table in which each line is an element +function linesToTable(s) + local size = string.len(s) + local i = 1 + local lines = {} + while i < size do + -- check \r in case the user added to this file a pattern + -- with an embedded dos-style "CR LF" sequence. + local first, last, line = string.find(s, '(.-)[\r]?\n', i) + + if first == nil then + table.insert(lines, string.sub(s, i)) + i = size + else + table.insert(lines, line) + i = last +1 + end + end + return lines +end + +-- copied verbatim from https://www.lua.org/pil/19.3.html +function pairsSortedByKeys (t, f) + local a = {} + for n in pairs(t) do table.insert(a, n) end + table.sort(a, f) + local i = 0 -- iterator variable + local iter = function () -- iterator function + i = i + 1 + if a[i] == nil then return nil + else return a[i], t[a[i]] + end + end + return iter + end + + +--[[ ##### STACK ##### ]]-- + +Stack = {} + +function Stack:new() + local o = {} + setmetatable(o, self) + self.__index = self + return o +end + +function Stack:push(val) + table.insert(self, val) +end + +function Stack:pop() + if #self > 0 then + return table.remove(self) + else + return nil + end +end + +function Stack:peek() + return self[#self] +end + +function Stack:size() + return #self +end + +function Stack:empty() + return #self == 0 +end + + +--[[ ##### GLOBTOPATTERN ##### ]]-- + +-- convert a file glob to a lua pattern + +-- globtopattern (c) 2008-2011 David Manura. Licensed under the same terms as Lua (MIT). +-- copied verbatim from https://github.com/davidm/lua-glob-pattern + +function globtopattern(g) + -- Some useful references: + -- - apr_fnmatch in Apache APR. For example, + -- http://apr.apache.org/docs/apr/1.3/group__apr__fnmatch.html + -- which cites POSIX 1003.2-1992, section B.6. + + local p = "^" -- pattern being built + local i = 0 -- index in g + local c -- char at index i in g. + + -- unescape glob char + local function unescape() + if c == '\\' then + i = i + 1; c = g:sub(i,i) + if c == '' then + p = '[^]' + return false + end + end + return true + end + + -- escape pattern char + local function escape(c) + return c:match("^%w$") and c or '%' .. c + end + + -- Convert tokens at end of charset. + local function charset_end() + while 1 do + if c == '' then + p = '[^]' + return false + elseif c == ']' then + p = p .. ']' + break + else + if not unescape() then break end + local c1 = c + i = i + 1; c = g:sub(i,i) + if c == '' then + p = '[^]' + return false + elseif c == '-' then + i = i + 1; c = g:sub(i,i) + if c == '' then + p = '[^]' + return false + elseif c == ']' then + p = p .. escape(c1) .. '%-]' + break + else + if not unescape() then break end + p = p .. escape(c1) .. '-' .. escape(c) + end + elseif c == ']' then + p = p .. escape(c1) .. ']' + break + else + p = p .. escape(c1) + i = i - 1 -- put back + end + end + i = i + 1; c = g:sub(i,i) + end + return true + end + + -- Convert tokens in charset. + local function charset() + i = i + 1; c = g:sub(i,i) + if c == '' or c == ']' then + p = '[^]' + return false + elseif c == '^' or c == '!' then + i = i + 1; c = g:sub(i,i) + if c == ']' then + -- ignored + else + p = p .. '[^' + if not charset_end() then return false end + end + else + p = p .. '[' + if not charset_end() then return false end + end + return true + end + + -- Convert tokens. + while 1 do + i = i + 1; c = g:sub(i,i) + if c == '' then + p = p .. '$' + break + elseif c == '?' then + p = p .. '.' + elseif c == '*' then + p = p .. '.*' + elseif c == '[' then + if not charset() then break end + elseif c == '\\' then + i = i + 1; c = g:sub(i,i) + if c == '' then + p = p .. '\\$' + break + end + p = p .. escape(c) + else + p = p .. escape(c) + end + end + return p +end + + +--[[ ##### PARSING THE COMMAND LINE ##### ]]-- + +-- loosely inspired by http://lua-users.org/wiki/AlternativeGetOpt + +function simpleGetopt(args, optionsWithArgs) + local userOptions = {} -- results will be stored here + + if optionsWithArgs == nil then optionsWithArgs = "" end + + i = 1 + while i <= #args do + + -- lua does not have "continue", so we put the loop body + -- in a "repeat/until true" block and use break instead. + repeat + local optname, optval + + -- this handles "--option=blah", "--option = blah", + -- "--option= blah" and "--option =blah" + if string.sub(args[i], 1, 2) == "--" then + optname = string.sub(args[i], 3) + + -- check for "--option=..." + local equals = string.find(optname, "=", 1, true) + if equals ~= nil then + optval = string.sub(optname, equals +1) + optname = string.sub(optname, 1, equals -1) + + -- check for "--option =..." + elseif i +1 <= #args and string.sub(args[i +1], 1, 1) == '=' then + optval = string.sub(args[i +1], 2) + i = i +1 -- do not process this again later on + end + + if optval ~= nil then + if optval == "" then -- check for "...= blah" + optval = args[i +1] + i = i +1 -- do not process this again later on + end + else + -- check for "--option" without "=" + optval = true + end + + simpleGetoptStoreVal(userOptions, optname, optval) + + break + end + + -- this handles "-a -b", "-ab", "-cVAL", "-c VAL", "-abcVAL", + -- and "-abc VAL". Obviously, "-cVALab" does not work (where + -- does "VAL" end?). + -- + -- To decide whether "-cVAL" means "c with param VAL" or + -- "options c, V, A, and L", we check optionsWithArgs. + if string.sub(args[i], 1, 1) == "-" then + local j = 2 + local length = string.len(args[i]) + + while (j <= length) do + local optname = string.sub(args[i], j, j) -- a single letter + if string.find(optionsWithArgs, optname, 1, true) then + if j < length then + optval = string.sub(args[i], j +1) + j = length + else + optval = args[i +1] + i = i +1 -- do not process this again later on + end + else + optval = true + end + + simpleGetoptStoreVal(userOptions, optname, optval) + + j = j + 1 -- next letter + end + + break + end + + -- the filename is the only argument that does not start with "-" + userOptions['filename'] = args[i] + until true + + i = i +1 -- next arg + + end -- while i <= #args + + return userOptions +end + +function simpleGetoptStoreVal(userOptions, optname, optval) + if type(optval) == 'boolean' then + userOptions[optname] = optval + return + end + + local tmp = string.lower(optval) + if tmp == "y" or tmp == "true" then + userOptions[optname] = true + elseif tmp == "n" or tmp == "false" then + userOptions[optname] = false + else + if type(userOptions[optname]) ~= 'table' then + userOptions[optname] = {} + end + table.insert(userOptions[optname], optval) + end +end + +--[[ +-- TESTING THE COMMAND LINE PARSER -- + +optionsWithArgs = 'abdg' -- these are followed by a parameter: "-b5", "-a true" + +args = { + '--should-be-true', + '-a', 'param-for-a', + '-bparam-for-b', + '-cdparam-for-d', -- c should be true + '-e', -- e should be true + '-fg', 'param-for-g', -- f should be true + '--opt1', '=', 'param-for-opt1', + '--opt2=', 'param-for-opt2', + '--opt3', '=param-for-opt3', + '--opt4=param-for-opt4', + '--also-should-be-true' +} + +for k, v in pairs(simpleGetopt(args, optionsWithArgs)) do + print("Option " .. k .. ': ', v) +end +--]] + + +--[[ ##################################################################### ]]-- +--[[ ######################### INPUT LINES BUFFER ######################## ]]-- +--[[ ##################################################################### ]]-- + +--[[ +This is a buffer of lines from the logfile. The first line in the +buffer (self.current) is treated specially: we may alter its content +during processing and, therefore, we record its original size so +later we can detect if it may be a wrapped line (i.e., if its +original length was max_print_line characters). +--]] + +Lines = {} +Lines.wrapped = {} -- memoization + +function Lines:gotoNextLine() + self.current = table.remove(self, 1) + self.currentWrapped = table.remove(self.wrapped, 1) + self.atBeginningOfLine = true + + -- When unwrapping lines, we need to check whether a line is of + -- the "right" size. However, we modify the content of currentLine + -- during processing, so we capture its initial length here + if self.current ~= nil then + self.currentLineInitialLength = string.len(self.current) + else + self.currentLineInitialLength = 0 + self.currentWrapped = false + end +end + +function Lines:handledChars(n) + -- After a handler processes currentLine, it indicates how much + -- from the line it processed, either leaving some trailing text + -- for the next handler or leaving nothing, indicating that it is + -- time to get more data and call gotoNextLine(). + if n == nil then + self.current = nil + else + self.current = string.sub(self.current, n +1) + self.atBeginningOfLine = false + end + +end + +function Lines:len(n) + local n = n or 0 + if n == 0 then return self.currentLineInitialLength end + return string.len(self[n]) +end + +function Lines:append(x) + table.insert(self, x) + table.insert(self.wrapped, "unknown") -- cannot use "nil" +end + +function Lines:get(n) + local n = n or 0 + if n == 0 then return self.current end + return self[n] +end + +function Lines:empty() + return #self == 0 +end + +function Lines:numLines() + return #self +end + + +--[[ ##### UNWRAPPING LINES ##### ]]-- + +function Lines:seemsWrappedMemo(n) + if n == 0 then + return self.currentWrapped + else + return self.wrapped[n] + end +end + +function Lines:setWrappedMemo(n, val) + if n == 0 then + self.currentWrapped = val + else + self.wrapped[n] = val + end +end + +function Lines:unwrapOneLine() + -- We trust the caller to check :seemsWrapped() before + -- calling this! + local old = self.current + self:gotoNextLine() -- this also updates currentLineInitialLength + self.current = old .. self.current +end + +function Lines:seemsWrapped(position) + if not badLogfile then return false end + + if position == nil then position = 0 end + + if self:seemsWrappedMemo(position) ~= 'unknown' then + return self:seemsWrappedMemo(position) + end + + -- No next line, so the current line cannot be a wrapped line. + -- The buffer should be large enough to guarantee this will + -- only happen when we are actually at the end of the input + if self:get(position +1) == nil then + -- BUT, just in case the buffer does get + -- empty before EOF, do not memoize + --self:setWrappedMemo(position, false) + return false + end + + if not self:wrappingLength(position) then + self:setWrappedMemo(position, false) + return false + end + + -- ok, the line length suggests this line continues on the + -- next, but we need to be sure; let's check if there are + -- no handlers that can manage the next line + local result = self:noHandlersForNextLine(position) + self:setWrappedMemo(position, result) + return result +end + +function Lines:wrappingLength(position) + local line = self:get(position) + local n = self:len(position) + + -- I have seen at least two cases where TeX "forgot" to + -- wrap a line. In this happens, the line is not wrapped. + if n > max_print_line +1 then return false end + + -- Is the line the "right" length? + -- (max_print_line or max_print_line +1) + if n >= max_print_line then return true end + + -- Ok, n < max_print_line, so it looks like this is not + -- a wrapped line. BUT! LuaTeX does not break a multibyte + -- UTF-8 character, which means some lines may be broken + -- at lengths < max_print_line; let's check for this. + + -- Get the length of the first UTF-8 character on the next line: + -- https://www.lua.org/manual/5.3/manual.html#pdf-utf8.charpattern + local _, nextcharsize = string.find(self:get(position +1), + '^' .. utf8.charpattern) + + -- if it is not a multibyte char, the line really is not wrapped + if nextcharsize == 1 then return false end + + -- Some *very* simplistic experiments tell me that if a + -- multibyte UTF-8 character in the last position of a line + -- would make that line exactly max_print_line long, LuaTeX + -- still breaks the line, even though the character would fit. + -- This is why we do "+1" here. + + -- If the multibyte char would fit, the line really is not wrapped + if n + nextcharsize +1 <= max_print_line then return false end + + -- The line is shorter because of an UTF-8 multibyte + -- char, so it seems like a wrapped line + return true +end + +function Lines:noHandlersForNextLine(position) + local line = self:get(position) + + local wrapped = true + for _, candidateHandler in ipairs(beginningOfLineHandlers) do + if candidateHandler:canDoit(position +1) then wrapped = false break end + end + + for _, candidateHandler in ipairs(anywhereHandlers) do + if candidateHandler:canDoit(position +1) then wrapped = false break end + end + + if wrapped then return true end + + -- TODO: the way we deal with these special cases is lame... + + -- a close parens at the beginning of the next line might not be + -- a "close file" message, but instead refer to an open parens in + -- the current line; let's check for this exceptional case. We + -- traverse the current line looking for open/close parens and pair + -- every close parens to the corresponding open parens. A dangling + -- close parens is probably a continuation too, so we ignore it. + if closeParensHandler:canDoit(position +1) then + -- We previously decided the line is not wrapped because + -- there is a close parens in the following line; let's + -- revise that decision + local unpaired = 0 + local i = 1 + local size = string.len(line) + while i <= size do + local j = string.find(line, '[%(%)]', i) + if j ~= nil then + local open = string.find(line, '%(', i) + if open then + unpaired = unpaired +1 + elseif unpaired > 0 then + unpaired = unpaired -1 + end + i = j +1 + else + i = size +1 + end + end + + if unpaired > 0 then return true end + end + + -- Same thing for close square bracket + if closeSquareBracketHandler:canDoit(position +1) then + -- We previously decided the line is not wrapped because + -- there is a close square bracket in the following line; + -- let's revise that decision + local unpaired = 0 + local i = 1 + local size = string.len(line) + while i <= size do + local j = string.find(line, '[%[%]]', i) + if j ~= nil then + local open = string.find(line, '%[', i) + if open then + unpaired = unpaired +1 + elseif unpaired > 0 then + unpaired = unpaired -1 + end + i = j +1 + else + i = size +1 + end + end + + if unpaired > 0 then return true end + end + + local parens, data = openParensHandler:canDoit(position +1) + local filename = data[1] + if parens and filename == nil then + -- Next line could be handled as an "open parens" message, but + -- there is no filename, so the message is only "(". There is + -- a good chance that is just the continuation of a previous + -- wrapped message. If there is a close parens character on the + -- line too, we'll assume that is true and ignore the handler + local first = string.find(self:get(position +1), "%)") + if first ~= nil then return true end + end + + local bracket, data = openSquareBracketHandler:canDoit(position +1) + local page = data[1] + if bracket and page == nil then + -- Next line could be handled as an "open square bracket" message, + -- but there is no page number, so the message is only "[". There + -- is a good chance that is just the continuation of a previous + -- wrapped message. If there is a close square bracket character on + -- the line too, we'll assume that is true and ignore the handler + local first = string.find(self:get(position +1), "%]") + if first ~= nil then return true end + end + + return false +end + +function unwrapUntilPatternMatches(pat) + local last, tmp + while true do + matches = {string.find(Lines.current, pat)} + table.remove(matches, 1) -- remove "first" + last = table.remove(matches, 1) -- remove "last" + + if last ~= nil then break end + + if Lines:seemsWrapped() then + Lines:unwrapOneLine() + else + io.stderr:write(" texlogsieve: parsing error\n") + end + end + + -- We matched the given pattern. However, if the pattern ends with + -- something like ".+", it is possible that there is still some more + -- relevant material in the next line (this is why we should not use + -- such patterns). There is not much we can do about that in general, + -- but if the next line is really short, this is probably why, so we + -- might as well try to unwrap once more. This is obviously a hack, + -- but it saves us from problems with a couple of messages that use + -- "filepat" at the end of the pattern. + + -- these might fit in 2 chars, so do not consider lines with that + local realMessage = string.find(Lines:get(1), '[%)%[%]]') + if string.len(Lines:get(1)) < 3 and not realMessage then + local together = Lines.current .. Lines:get(1) + local candidateMatches = {string.find(together, pat)} + table.remove(candidateMatches, 1) + local candidateLast = table.remove(candidateMatches, 1) + if candidateLast ~= nil then + Lines:unwrapOneLine() + last = candidateLast + matches = candidateMatches + end + end + + return last, matches +end + +function unwrapUntilStringMatches(s) + return unwrapUntilPatternMatches(protect_metachars(s)) +end + + +--[[ ##################################################################### ]]-- +--[[ ################## GUESSING FILENAMES AND SHIPOUTS ################## ]]-- +--[[ ##################################################################### ]]-- + +--[[ +To find the full path of a file in the TeX search path, we may use + +thepath = kpse.find_file("article") +thepath = kpse.find_file("/usr/share/texlive/texmf-dist/tex/latex/base/article.cls") +thepath = kpse.find_file("latex/base/article.cls") +thepath = kpse.find_file("texmf.cnf", "cnf") + +The filename may or may not include the extension; kpathsea adds the +extension if necessary according to the specified format (default is +"tex", which means extensions .tex, .sty, .cls and some others). This +is problematic, because (1) it does not recognize filenames with an +unknown extension and (2) if there is a file named "what.ever.tex" and +another one called "what.ever", it may find the wrong file. + +We want to check whether a string from the log file corresponds to the +complete path of an existing filename, which means we already know the +extension. Therefore, we will use the type "other text files". This +prevents kpathsea from adding the extension automatically (which is what +we want) and also prevents kpathsea from searching the standard TeX path, +which is also nice because we are checking a complete path. +--]] + +function guessFilename(position) + if position == nil then position = 0 end + local line = Lines:get(position) + local _, last = string.find(line, '^%s*%(') + if last ~= nil then line = string.sub(line, last +1) end + + local quotes, filename = guessQuotedFilename(line, position) + + if filename ~= nil then return filename end + + if quotes then return nil end + + return guessUnquotedFilename(line, position) +end + +function guessShipoutPage(position) + -- In general, a shipout is identified by "[\count0.\count1.\count2..." + -- followed by a space or "]". However, there are complications: + -- + -- 1. Dates, such as [2020/10/03] or [2020-10-03] + -- + -- 2. Files added to the shipout, such as + -- "[3{somefile.tex}" or "[3" + -- + -- We can either: + -- + -- 1. Specify what is allowed: "^(%d+[%d%.]*)[ %]<{]" or "^(%d+[%d%.]*)$" + -- + -- 2. Exclude what is forbidden: "^(%d+[%d%.]*)[^/-]" + -- + -- Let's go with option 1. + + local patterns = { + "^(%d+[%d%.]*)[ %]<{]", + "^(%d+[%d%.]*)$" + } + + if position == nil then position = 0 end + local line = Lines:get(position) + local _, last = string.find(line, '^%s*%[') + if last ~= nil then line = string.sub(line, last +1) end + + while true do + for _, pattern in ipairs(patterns) do + _, _, page = string.find(line, pattern) + if page ~= nil then + -- just the number, please + local _, last = string.find(page, '^%d+[%d%.]*') + page = string.sub(page, 1, last) + break + end + end + + if not Lines:seemsWrapped(position) then break end + + local nextline = Lines:get(1) + line = line .. nextline + position = position +1 + end + + return page -- may be nil +end + +function guessQuotedFilename(line, position) + -- luatex puts quotes around filenames with spaces, which makes things easier + while true do + local _, last = string.find(line, '^"') + if string.len(line) > 0 and last == nil then return false end -- no quotes + + last = string.find(line, '^"[%.]?/') -- relative path or unix-style path + if last == nil then + last = string.find(line, '^"%a:/') -- windows-style path + end + -- there are quotes, but what follows is not a filename + if string.len(line) >= 4 and last == nil then return true, nil end + + _, last = string.find(line, '^"%a?[:]?[%.]?/[^"%(%)%[%]]+"') + if last ~= nil then + local filename = string.sub(line, 2, last -1) -- remove quotes + if kpse.find_file(filename, 'other text files') == nil then + return true, nil -- there are quotes, but no filename + else + return true, '"' .. filename .. '"' + end + end + + -- no closing quote or the line is too short; can we unwrap this line? + if not Lines:seemsWrapped(position) then + io.stderr:write(" texlogsieve: parsing error\n") + return true, nil + end + + -- yep! + line = line .. Lines:get(position +1) + position = position +1 + end +end + +-- no quotes; let's exhaustively extract the substrings of currentLine +-- and use kpse.find_file() to check if any of them is an existing +-- filename. +function guessUnquotedFilename(line, position) + -- In subsequent iterations, we do not check the smaller strings + -- we already checked in the previous ones. + local alreadyCheckedIdx = 0 + + while true do + local first = string.find(line, '^[%.]?/') -- relative or unix-style path + if first == nil then + first = string.find(line, '^%a:/') -- windows-style path + end + -- this does not look like a filename + if string.len(line) >= 3 and first == nil then return nil end + + local longest = string.len(line) + + -- if there is a ")", "(", "[", or "]" char, stop before that + first = string.find(line, "[%)%(%[%]]") + if first ~= nil then longest = first -1 end + + -- From longest to shortest, to avoid problems if there is a + -- substring in the filename that matches some other filename. + for i = longest, alreadyCheckedIdx +1, -1 do + local filename = string.sub(line, 1, i) + if kpse.find_file(filename, 'other text files') ~= nil then + return filename + end + end + + -- we did not find the filename; can we unwrap this line? + if not Lines:seemsWrapped(position) then return nil end + first = string.find(line, "[%)%(%[%]]") + if first ~= nil then return nil end + + -- yep! + alreadyCheckedIdx = longest + line = line .. Lines:get(position +1) + position = position +1 + end +end + +--[[ ###################################################################### ]]-- +--[[ ######################## BEGINNING OF SCRIPT ######################### ]]-- +--[[ ###################################################################### ]]-- + + +main(arg) -- cgit v1.2.3