From 4a6fbdc0e89fde6f9efcaa24de3db8e137da4404 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Mon, 9 Jan 2006 01:01:02 +0000 Subject: trunk/Master/texmf-dist/dvips git-svn-id: svn://tug.org/texlive/trunk@88 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/dvips/pstricks/pstricks.pro | 410 ++++++++++++++++++++++++++ 1 file changed, 410 insertions(+) create mode 100644 Master/texmf-dist/dvips/pstricks/pstricks.pro (limited to 'Master/texmf-dist/dvips/pstricks/pstricks.pro') diff --git a/Master/texmf-dist/dvips/pstricks/pstricks.pro b/Master/texmf-dist/dvips/pstricks/pstricks.pro new file mode 100644 index 00000000000..8c67d1cb7da --- /dev/null +++ b/Master/texmf-dist/dvips/pstricks/pstricks.pro @@ -0,0 +1,410 @@ +%! +% PostScript prologue for pstricks.tex. +% Version 1.00, 2005/09/18 +% For distribution, see pstricks.tex. +% +/tx@Dict 200 dict def tx@Dict begin +/ADict 25 dict def +/CM { matrix currentmatrix } bind def +/SLW /setlinewidth load def +/CLW /currentlinewidth load def +/CP /currentpoint load def +/ED { exch def } bind def +/L /lineto load def +/T /translate load def +/TMatrix { } def +/RAngle { 0 } def +/Atan { /atan load stopped { pop pop 0 } if } def +/ATAN1 {neg -1 atan 180 sub } def % atan(x) (only one parameter) +/Div { dup 0 eq { pop } { div } ifelse } def % control the division +/NET { neg exch neg exch T } def % change coordinate system to the negative one +/Pyth { dup mul exch dup mul add sqrt } def % Pythagoras, epects 2 parameter +/PtoC { 2 copy cos mul 3 1 roll sin mul } def % Polar to Cartesian +%----------------- hv added 20050516 --------------- +/Pi 3.14159265359 def +/TwoPi 6.28318530718 def +/Euler 2.71828182846 def +/RadtoDeg { 180 mul Pi div } def % convert from radian to degrees +/DegtoRad { Pi mul 180 div } def % viceversa +%----------------- hv end--------------------------- +/PathLength@ { /z z y y1 sub x x1 sub Pyth add def /y1 y def /x1 x def } def +/PathLength { flattenpath /z 0 def + { /y1 ED /x1 ED /y2 y1 def /x2 x1 def + }{ /y ED /x ED PathLength@ } {} { /y y2 def /x x2 def PathLength@ } + /pathforall load stopped { pop pop pop pop } if z } def +/STP { .996264 dup scale } def +/STV { SDict begin normalscale end STP } def +% +%%-------------- DG begin patch 15 ---------------%% +%/DashLine { dup 0 gt { /a .5 def PathLength exch div } { pop /a 1 def +%PathLength } ifelse /b ED /x ED /y ED /z y x add def b a .5 sub 2 mul y +%mul sub z Div round z mul a .5 sub 2 mul y mul add b exch Div dup y mul +%/y ED x mul /x ED x 0 gt y 0 gt and { [ y x ] 1 a sub y mul } { [ 1 0 ] +%0 } ifelse setdash stroke } def +/DashLine { + dup 0 gt { /a .5 def PathLength exch div } { pop /a 1 def PathLength } ifelse + /b ED /x1 ED /y1 ED /x ED /y ED + /z y x add y1 add x1 add def + /Coef b a .5 sub 2 mul y mul sub z Div round + z mul a .5 sub 2 mul y mul add b exch Div def + /y y Coef mul def + /x x Coef mul def + /y1 y1 Coef mul def + /x1 x1 Coef mul def + x1 0 gt y1 0 gt or x 0 gt or y 0 gt and + { [ y x y1 x1 ] 1 a sub y mul } + { [ 1 0 ] 0 } ifelse + setdash stroke +} def +%%-------------- DG end patch 15 ---------------%% +/DotLine { + /b PathLength def + /a ED /z ED /y CLW def + /z y z add def + a 0 gt { + /b b a div def + }{ + a 0 eq { + /b b y sub def + }{ a -3 eq { + /b b y add def } if + } ifelse + } ifelse + [ 0 b b z Div round Div dup 0 le { pop 1 } if ] + a 0 gt { 0 }{ y 2 div a -2 gt { neg }if } ifelse + setdash 1 setlinecap stroke +} def +% +/LineFill { % hv ------------ patch 7 ------------- + gsave + abs /hatchWidthInc ED + abs /hatchSepInc ED + abs CLW add /a ED + a 0 dtransform round exch round exch + 2 copy idtransform + exch Atan rotate + idtransform pop /a ED + .25 .25 itransform pathbbox + /y2 ED + a Div ceiling cvi /x2 ED /y1 ED + a Div cvi /x1 ED /y2 y2 y1 sub def + clip + newpath + 2 setlinecap + systemdict + /setstrokeadjust known { true setstrokeadjust } if + x2 x1 sub 1 add { + x1 a mul y1 moveto 0 y2 rlineto stroke + /x1 x1 1 add + hatchWidthInc 0 gt { CLW add } if + def + hatchSepInc 0 gt hatchWidthInc 0 gt or { + /a a hatchSepInc add def + CLW hatchWidthInc add SLW + } if + } repeat + grestore + pop pop } def +% +%gsave abs CLW add /a ED a 0 dtransform round exch round exch +%2 copy idtransform exch Atan rotate idtransform pop /a ED .25 .25 +%% DG/SR modification begin - Dec. 12, 1997 - Patch 2 +%%itransform translate pathbbox /y2 ED a Div ceiling cvi /x2 ED /y1 ED a +%itransform pathbbox /y2 ED a Div ceiling cvi /x2 ED /y1 ED a +%% DG/SR modification end +%Div cvi /x1 ED /y2 y2 y1 sub def clip newpath 2 setlinecap systemdict +%/setstrokeadjust known { true setstrokeadjust } if x2 x1 sub 1 add { x1 +%% DG/SR modification begin - Jun. 1, 1998 - Patch 3 (from Michael Vulis) +%% a mul y1 moveto 0 y2 rlineto stroke /x1 x1 1 add def } repeat grestore } +%% def +%a mul y1 moveto 0 y2 rlineto stroke /x1 x1 1 add def } repeat grestore +%pop pop } def +%% DG/SR modification end +% +/BeginArrow { ADict begin /@mtrx CM def gsave 2 copy T 2 index sub neg +exch 3 index sub exch Atan rotate newpath } def +/EndArrow { @mtrx setmatrix CP grestore end } def +/Arrow { CLW mul add dup 2 div /w ED mul dup /h ED mul /a ED { 0 h T 1 -1 +scale } if w neg h moveto 0 0 L w h L w neg a neg rlineto gsave fill +grestore } def +/Tbar { CLW mul add /z ED z -2 div CLW 2 div moveto z 0 rlineto stroke 0 +CLW moveto } def +/Bracket { CLW mul add dup CLW sub 2 div /x ED mul CLW add /y ED /z CLW 2 +div def x neg y moveto x neg CLW 2 div L x CLW 2 div L x y L stroke 0 +CLW moveto } def +/RoundBracket { CLW mul add dup 2 div /x ED mul /y ED /mtrx CM def 0 CLW +2 div T x y mul 0 ne { x y scale } if 1 1 moveto .85 .5 .35 0 0 0 +curveto -.35 0 -.85 .5 -1 1 curveto mtrx setmatrix stroke 0 CLW moveto } +def +/SD { 0 360 arc fill } def +/EndDot { { /z DS def } { /z 0 def } ifelse /b ED 0 z DS SD b { 0 z DS +CLW sub SD } if 0 DS z add CLW 4 div sub moveto } def +/Shadow { [ { /moveto load } { /lineto load } { /curveto load } { +/closepath load } /pathforall load stopped { pop pop pop pop CP /moveto +load } if ] cvx newpath 3 1 roll T exec } def +/NArray { aload length 2 div dup dup cvi eq not { exch pop } if /n exch +cvi def } def +/NArray { % holds the coordinates and on top of stack the showpoints boolean + /f ED + counttomark 2 div dup cvi /n ED + n eq not { exch pop } if + f { ] aload /Points ED } { n 2 mul 1 add -1 roll pop } ifelse +} def +/Line { + NArray n 0 eq not + { n 1 eq { 0 0 /n 2 def } if ArrowA /n n 2 sub def + n { Lineto } repeat + CP 4 2 roll ArrowB L pop pop + } if +} def +/Arcto { /a [ 6 -2 roll ] cvx def a r /arcto load stopped { 5 } { 4 } + ifelse { pop } repeat a } def +/CheckClosed { dup n 2 mul 1 sub index eq 2 index n 2 mul 1 add index eq + and { pop pop /n n 1 sub def } if } def +/Polygon { NArray n 2 eq { 0 0 /n 3 def } if n 3 lt { n { pop pop } + repeat } { n 3 gt { CheckClosed } if n 2 mul -2 roll /y0 ED /x0 ED /y1 + ED /x1 ED x1 y1 /x1 x0 x1 add 2 div def /y1 y0 y1 add 2 div def x1 y1 + moveto /n n 2 sub def n { Lineto } repeat x1 y1 x0 y0 6 4 roll Lineto + Lineto pop pop closepath } ifelse } def +/Diamond { + /mtrx CM def + T rotate + /h ED + /w ED + dup 0 eq { pop } { CLW mul neg + /d ED + /a w h Atan def + /h d a sin Div h add def + /w d a cos Div w add def } ifelse + mark w 2 div h 2 div w 0 0 h neg w neg 0 0 h w 2 div h 2 div + /ArrowA { moveto } def + /ArrowB { } def + false Line + closepath mtrx setmatrix } def +% DG modification begin - Jan. 15, 1997 +%/Triangle { /mtrx CM def translate rotate /h ED 2 div /w ED dup 0 eq { +%pop } { CLW mul /d ED /h h d w h Atan sin Div sub def /w w d h w Atan 2 +%div dup cos exch sin Div mul sub def } ifelse mark 0 d w neg d 0 h w d 0 +%d /ArrowA { moveto } def /ArrowB { } def false Line closepath mtrx +%setmatrix } def +/Triangle { /mtrx CM def translate rotate /h ED 2 div /w ED dup +CLW mul /d ED /h h d w h Atan sin Div sub def /w w d h w Atan 2 +div dup cos exch sin Div mul sub def mark 0 d w neg d 0 h w d 0 +d /ArrowA { moveto } def /ArrowB { } def false Line closepath mtrx +% DG/SR modification begin - Jun. 1, 1998 - Patch 3 (from Michael Vulis) +% setmatrix } def +setmatrix pop } def +% DG/SR modification end +/CCA { /y ED /x ED 2 copy y sub /dy1 ED x sub /dx1 ED /l1 dx1 dy1 Pyth +def } def +/CCA { /y ED /x ED 2 copy y sub /dy1 ED x sub /dx1 ED /l1 dx1 dy1 Pyth +def } def +/CC { /l0 l1 def /x1 x dx sub def /y1 y dy sub def /dx0 dx1 def /dy0 dy1 +def CCA /dx dx0 l1 c exp mul dx1 l0 c exp mul add def /dy dy0 l1 c exp +mul dy1 l0 c exp mul add def /m dx0 dy0 Atan dx1 dy1 Atan sub 2 div cos +abs b exp a mul dx dy Pyth Div 2 div def /x2 x l0 dx mul m mul sub def +/y2 y l0 dy mul m mul sub def /dx l1 dx mul m mul neg def /dy l1 dy mul +m mul neg def } def +/IC { /c c 1 add def c 0 lt { /c 0 def } { c 3 gt { /c 3 def } if } +ifelse /a a 2 mul 3 div 45 cos b exp div def CCA /dx 0 def /dy 0 def } +def +/BOC { IC CC x2 y2 x1 y1 ArrowA CP 4 2 roll x y curveto } def +/NC { CC x1 y1 x2 y2 x y curveto } def +/EOC { x dx sub y dy sub 4 2 roll ArrowB 2 copy curveto } def +/BAC { IC CC x y moveto CC x1 y1 CP ArrowA } def +/NAC { x2 y2 x y curveto CC x1 y1 } def +/EAC { x2 y2 x y ArrowB curveto pop pop } def +/OpenCurve { + NArray n 3 lt + { n { pop pop } repeat } + { BOC /n n 3 sub def n { NC } repeat EOC } ifelse +} def +/AltCurve { { false NArray n 2 mul 2 roll [ n 2 mul 3 sub 1 roll ] aload +/Points ED n 2 mul -2 roll } { false NArray } ifelse n 4 lt { n { pop +pop } repeat } { BAC /n n 4 sub def n { NAC } repeat EAC } ifelse } def +/ClosedCurve { NArray n 3 lt { n { pop pop } repeat } { n 3 gt { +CheckClosed } if 6 copy n 2 mul 6 add 6 roll IC CC x y moveto n { NC } +repeat closepath pop pop } ifelse } def +/SQ { /r ED r r moveto r r neg L r neg r neg L r neg r L fill } def +/ST { /y ED /x ED x y moveto x neg y L 0 x L fill } def +/SP { /r ED gsave 0 r moveto 4 { 72 rotate 0 r L } repeat fill grestore } +def +/FontDot { DS 2 mul dup matrix scale matrix concatmatrix exch matrix +rotate matrix concatmatrix exch findfont exch makefont setfont } def +/Rect { x1 y1 y2 add 2 div moveto x1 y2 lineto x2 y2 lineto x2 y1 lineto +x1 y1 lineto closepath } def +/OvalFrame { x1 x2 eq y1 y2 eq or { pop pop x1 y1 moveto x2 y2 L } { y1 +y2 sub abs x1 x2 sub abs 2 copy gt { exch pop } { pop } ifelse 2 div +exch { dup 3 1 roll mul exch } if 2 copy lt { pop } { exch pop } ifelse +/b ED x1 y1 y2 add 2 div moveto x1 y2 x2 y2 b arcto x2 y2 x2 y1 b arcto +x2 y1 x1 y1 b arcto x1 y1 x1 y2 b arcto 16 { pop } repeat closepath } +ifelse } def +/Frame { CLW mul /a ED 3 -1 roll 2 copy gt { exch } if a sub /y2 ED a add +/y1 ED 2 copy gt { exch } if a sub /x2 ED a add /x1 ED 1 index 0 eq { +pop pop Rect } { OvalFrame } ifelse } def +/BezierNArray { /f ED counttomark 2 div dup cvi /n ED n eq not { exch pop +} if n 1 sub neg 3 mod 3 add 3 mod { 0 0 /n n 1 add def } repeat f { ] +aload /Points ED } { n 2 mul 1 add -1 roll pop } ifelse } def +/OpenBezier { BezierNArray n 1 eq { pop pop } { ArrowA n 4 sub 3 idiv { 6 +2 roll 4 2 roll curveto } repeat 6 2 roll 4 2 roll ArrowB curveto } +ifelse } def +/ClosedBezier { BezierNArray n 1 eq { pop pop } { moveto n 1 sub 3 idiv { +6 2 roll 4 2 roll curveto } repeat closepath } ifelse } def +/BezierShowPoints { gsave Points aload length 2 div cvi /n ED moveto n 1 +sub { lineto } repeat CLW 2 div SLW [ 4 4 ] 0 setdash stroke grestore } +def +/Parab { /y0 exch def /x0 exch def /y1 exch def /x1 exch def /dx x0 x1 +sub 3 div def /dy y0 y1 sub 3 div def x0 dx sub y0 dy add x1 y1 ArrowA +x0 dx add y0 dy add x0 2 mul x1 sub y1 ArrowB curveto /Points [ x1 y1 x0 +y0 x0 2 mul x1 sub y1 ] def } def +/Grid { newpath /a 4 string def /b ED /c ED /n ED cvi dup 1 lt { pop 1 } +if /s ED s div dup 0 eq { pop 1 } if /dy ED s div dup 0 eq { pop 1 } if +/dx ED dy div round dy mul /y0 ED dx div round dx mul /x0 ED dy div +round cvi /y2 ED dx div round cvi /x2 ED dy div round cvi /y1 ED dx div +round cvi /x1 ED /h y2 y1 sub 0 gt { 1 } { -1 } ifelse def /w x2 x1 sub +0 gt { 1 } { -1 } ifelse def b 0 gt { /z1 b 4 div CLW 2 div add def +/Helvetica findfont b scalefont setfont /b b .95 mul CLW 2 div add def } +if systemdict /setstrokeadjust known { true setstrokeadjust /t { } def } +{ /t { transform 0.25 sub round 0.25 add exch 0.25 sub round 0.25 add +exch itransform } bind def } ifelse gsave n 0 gt { 1 setlinecap [ 0 dy n +div ] dy n div 2 div setdash } { 2 setlinecap } ifelse /i x1 def /f y1 +dy mul n 0 gt { dy n div 2 div h mul sub } if def /g y2 dy mul n 0 gt { +dy n div 2 div h mul add } if def x2 x1 sub w mul 1 add dup 1000 gt { +pop 1000 } if { i dx mul dup y0 moveto b 0 gt { gsave c i a cvs dup +stringwidth pop /z2 ED w 0 gt {z1} {z1 z2 add neg} ifelse h 0 gt {b neg} +{z1} ifelse rmoveto show grestore } if dup t f moveto g t L stroke /i i +w add def } repeat grestore gsave n 0 gt +% DG/SR modification begin - Nov. 7, 1997 - Patch 1 +%{ 1 setlinecap [ 0 dx n div ] dy n div 2 div setdash } +{ 1 setlinecap [ 0 dx n div ] dx n div 2 div setdash } +% DG/SR modification end +{ 2 setlinecap } ifelse /i y1 def /f x1 dx mul +n 0 gt { dx n div 2 div w mul sub } if def /g x2 dx mul n 0 gt { dx n +div 2 div w mul add } if def y2 y1 sub h mul 1 add dup 1000 gt { pop +1000 } if { newpath i dy mul dup x0 exch moveto b 0 gt { gsave c i a cvs +dup stringwidth pop /z2 ED w 0 gt {z1 z2 add neg} {z1} ifelse h 0 gt +{z1} {b neg} ifelse rmoveto show grestore } if dup f exch t moveto g +exch t L stroke /i i h add def } repeat grestore } def +/ArcArrow { /d ED /b ED /a ED gsave newpath 0 -1000 moveto clip newpath 0 +1 0 0 b grestore c mul /e ED pop pop pop r a e d PtoC y add exch x add +exch r a PtoC y add exch x add exch b pop pop pop pop a e d CLW 8 div c +mul neg d } def +/Ellipse { /mtrx CM def T scale 0 0 1 5 3 roll arc mtrx setmatrix } def +% +/ArcAdjust { +% given a target length (targetLength) and an initial angle (angle0) [in the stack], +% let M(angle0)=(rx*cos(angle0),ry*sin(angle0))=(x0,y0). +% This computes an angle t such that (x0,y0) is at distance targetLength from the point M(t)=(rx*cos(t),ry*sin(t)). +% NOTE: this an absolute angle, it does not have to be added or substracted to angle0 +% contrary to TvZ's code. +% To achieve, this, one iterates the following process: start with some angle t, +% compute the point M' at distance targetLength of (x0,y0) on the semi-line [(x0,y0) M(t)]. +% Now take t' (= new angle) so that (0,0) M(t') and M' are aligned. +% +% Another difference with TvZ's code is that we need d (=add/sub) to be defined. +% the value of d = add/sub is used to know on which side we have to move. +% It is only used in the initialisation of the angle before the iteration. +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% Input stack: 1: target length 2: initial angle +% variables used : rx, ry, d (=add/sub) +% + /targetLength ED /angle0 ED + /x0 rx angle0 cos mul def + /y0 ry angle0 sin mul def +% we are looking for an angle t such that (x0,y0) is at distance targetLength from the point M(t)=(rx*cos(t),ry*sin(t))) +%initialisation of angle (using 1st order approx = TvZ's code) + targetLength 57.2958 mul + angle0 sin rx mul dup mul + angle0 cos ry mul dup mul + add sqrt div +% if initialisation angle is two large (more than 90 degrees) set it to 90 degrees +% (if the ellipse is very curved at the point where we draw the arrow, the value can be much more than 360 degrees !) +% this should avoid going on the wrong side (more than 180 degrees) or go near +% a bad attractive point (at 180 degrees) + dup 90 ge { pop 90 } if + angle0 exch d +% maximum number of times to iterate the iterative procedure: + 30 +% iterative procedure: takes an angle t on top of stack, computes a better angle (an put it on top of stack) + { dup +% compute distance D between (x0,y0) and M(t) + dup cos rx mul x0 sub dup mul exch sin ry mul y0 sub dup mul add sqrt +% if D almost equals targetLength, we stop + dup targetLength sub abs 1e-5 le { pop exit } if +% stack now contains D t +% compute the point M(t') at distance targetLength of (x0,y0) on the semi-line [(x0,y0) M(t)]: +% M(t')= ( (x(t)-x0)*targetLength/d+x0 , (y(t)-y0)*targetLength/d+y0 ) + exch dup cos rx mul x0 sub exch sin ry mul y0 sub +% stack contains: y(t)-y0, x(t)-x0, d + 2 index Div targetLength mul y0 add ry Div exch + 2 index Div targetLength mul x0 add rx Div +% stack contains x(t')/rx , y(t')/ry , d +% now compute t', and remove D from stack + atan exch pop + } repeat +% we don't look at what happened... in particular, if targetLength is greater than the diameter of the ellipse... +% the final angle will be around /angle0 + 180. maybe we should treat this pathological case... +%after iteration, stack contains an angle t such that M(t) is the tail of the arrow +% to give back the result as a an angle relative to angle0 we could add the following line: +% angle0 sub 0 exch d +% +} def +% +/EllipticArcArrow { + /d ED % add/sub + /b ED % arrow procedure + /a1 ED % angle + gsave + newpath + 0 -1000 moveto + clip % Set clippath far from arrow. + newpath + 0 1 0 0 b % Draw arrow to determine length. + grestore +% Length of arrow is on top of stack. Next 3 numbers are junk. +% + a1 exch ArcAdjust % Angular position of base of arrow. + /a2 ED + pop pop pop + a2 cos rx mul x add + a2 sin ry mul y add + a1 cos rx mul x add + a1 sin ry mul y add +% Now arrow tip coor and base coor are on stack. + b pop pop pop pop % Draw arrow, and discard coordinates. + a2 CLW 8 div +% change value of d (test it by looking if `` 1 1 d '' gives 2 or not ) + 1 1 d 2 eq { /d { sub } def } { /d { add } def } ifelse + ArcAdjust +% resets original value of d + 1 1 d 2 eq { /d { sub } def } { /d { add } def } ifelse % Adjust angle to give overlap. +} def +%%------------------ tvz/DG/hv (2004-05-10) end -------------------%% +% +/Rot { CP CP translate 3 -1 roll neg rotate NET } def +/RotBegin { tx@Dict /TMatrix known not { /TMatrix { } def /RAngle { 0 } +def } if /TMatrix [ TMatrix CM ] cvx def /a ED a Rot /RAngle [ RAngle +dup a add ] cvx def } def +/RotEnd { /TMatrix [ TMatrix setmatrix ] cvx def /RAngle [ RAngle pop ] +cvx def } def +/PutCoor { gsave CP T CM STV exch exec moveto setmatrix CP grestore } def +/PutBegin { /TMatrix [ TMatrix CM ] cvx def CP 4 2 roll T moveto } def +/PutEnd { CP /TMatrix [ TMatrix setmatrix ] cvx def moveto } def +/Uput { /a ED add 2 div /h ED 2 div /w ED /s a sin def /c a cos def /b s +abs c abs 2 copy gt dup /q ED { pop } { exch pop } ifelse def /w1 c b +div w mul def /h1 s b div h mul def q { w1 abs w sub dup c mul abs } { +h1 abs h sub dup s mul abs } ifelse } def +/UUput { /z ED abs /y ED /x ED q { x s div c mul abs y gt } { x c div s +mul abs y gt } ifelse { x x mul y y mul sub z z mul add sqrt z add } { q +{ x s div } { x c div } ifelse abs } ifelse a PtoC h1 add exch w1 add +exch } def +/BeginOL { dup (all) eq exch TheOL eq or { IfVisible not { Visible +/IfVisible true def } if } { IfVisible { Invisible /IfVisible false def +} if } ifelse } def +/InitOL { /OLUnit [ 3000 3000 matrix defaultmatrix dtransform ] cvx def +/Visible { CP OLUnit idtransform T moveto } def /Invisible { CP OLUnit +neg exch neg exch idtransform T moveto } def /BOL { BeginOL } def +/IfVisible true def } def +end +% END pstricks.pro -- cgit v1.2.3