From 8b88d8570ac83e33a29938f8799ab728a94a6b70 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Tue, 7 Feb 2012 22:42:14 +0000 Subject: l3kernel 3331 (7feb12) git-svn-id: svn://tug.org/texlive/trunk@25329 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/latex/l3kernel/expl3.pdf | Bin 645777 -> 645574 bytes .../texmf-dist/doc/latex/l3kernel/interface3.pdf | Bin 1108064 -> 1105824 bytes .../texmf-dist/doc/latex/l3kernel/interface3.tex | 89 ----- .../texmf-dist/doc/latex/l3kernel/l3styleguide.pdf | Bin 265601 -> 265597 bytes .../texmf-dist/doc/latex/l3kernel/l3styleguide.tex | 174 --------- .../doc/latex/l3kernel/l3syntax-changes.pdf | Bin 200418 -> 200416 bytes .../doc/latex/l3kernel/l3syntax-changes.tex | 80 ---- Master/texmf-dist/doc/latex/l3kernel/source3.pdf | Bin 2738591 -> 2734140 bytes Master/texmf-dist/doc/latex/l3kernel/source3.tex | 106 ------ .../texmf-dist/doc/latex/l3kernel/source3body.tex | 421 --------------------- 10 files changed, 870 deletions(-) delete mode 100644 Master/texmf-dist/doc/latex/l3kernel/interface3.tex delete mode 100644 Master/texmf-dist/doc/latex/l3kernel/l3styleguide.tex delete mode 100644 Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.tex delete mode 100644 Master/texmf-dist/doc/latex/l3kernel/source3.tex delete mode 100644 Master/texmf-dist/doc/latex/l3kernel/source3body.tex (limited to 'Master/texmf-dist/doc') diff --git a/Master/texmf-dist/doc/latex/l3kernel/expl3.pdf b/Master/texmf-dist/doc/latex/l3kernel/expl3.pdf index c55f7095749..7b8da4440ff 100644 Binary files a/Master/texmf-dist/doc/latex/l3kernel/expl3.pdf and b/Master/texmf-dist/doc/latex/l3kernel/expl3.pdf differ diff --git a/Master/texmf-dist/doc/latex/l3kernel/interface3.pdf b/Master/texmf-dist/doc/latex/l3kernel/interface3.pdf index 56506b03746..ab840c4a3d3 100644 Binary files a/Master/texmf-dist/doc/latex/l3kernel/interface3.pdf and b/Master/texmf-dist/doc/latex/l3kernel/interface3.pdf differ diff --git a/Master/texmf-dist/doc/latex/l3kernel/interface3.tex b/Master/texmf-dist/doc/latex/l3kernel/interface3.tex deleted file mode 100644 index 4c0a2761e92..00000000000 --- a/Master/texmf-dist/doc/latex/l3kernel/interface3.tex +++ /dev/null @@ -1,89 +0,0 @@ -% \iffalse meta-comment -% -%% File: interfaces3.tex Copyright (C) 1990-2011 The LaTeX3 Project -%% -%% It may be distributed and/or modified under the conditions of the -%% LaTeX Project Public License (LPPL), either version 1.3c of this -%% license or (at your option) any later version. The latest version -%% of this license is in the file -%% -%% http://www.latex-project.org/lppl.txt -%% -%% This file is part of the "l3kernel bundle" (The Work in LPPL) -%% and all files in that bundle must be distributed together. -%% -%% The released version of this bundle is available from CTAN. -%% -%% ----------------------------------------------------------------------- -%% -%% The development version of the bundle can be found at -%% -%% http://www.latex-project.org/svnroot/experimental/trunk/ -%% -%% for those people who are interested. -%% -%%%%%%%%%%% -%% NOTE: %% -%%%%%%%%%%% -%% -%% Snapshots taken from the repository represent work in progress and may -%% not work or may contain conflicting material! We therefore ask -%% people _not_ to put them into distributions, archives, etc. without -%% prior consultation with the LaTeX3 Project. -%% -%% ----------------------------------------------------------------------- -% -% \fi - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% This document will typeset the LaTeX3 interface descriptions a single -% document. This will produce quite a large file (more than 170 pages -% currently). -% -% There is also a full version of the sources (source3.tex) which additionally -% also typesets the command implementations. -% -% Do not forget to generate the index (as explained on the terminal output -% near the end of the run)! -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - -\documentclass{l3doc} -\listfiles - -\begin{document} - -\title{The \LaTeX3 Interfaces} -\author{% - The \LaTeX3 Project\thanks - {% - E-mail: - \href{mailto:latex-team@latex-project.org} - {latex-team@latex-project.org}% - }% -} - -\pagenumbering{roman} -\maketitle - -% -% First load all modules and typeset the documentation parts -% - -\input{source3body} % all the individual modules - -\clearpage - -\begingroup - \def\endash{--} - \catcode`\-\active - \def-{\futurelet\temp\indexdash} - \def\indexdash{\ifx\temp-\endash\fi} - \DelayPrintIndex -\endgroup - -\end{document} - - diff --git a/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.pdf b/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.pdf index 203b3896df8..10cecf96683 100644 Binary files a/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.pdf and b/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.pdf differ diff --git a/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.tex b/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.tex deleted file mode 100644 index c14d7d8eefd..00000000000 --- a/Master/texmf-dist/doc/latex/l3kernel/l3styleguide.tex +++ /dev/null @@ -1,174 +0,0 @@ -\iffalse meta-comment - -File l3styleguide.tex Copyright (C) 2011 The LaTeX3 Project - -It may be distributed and/or modified under the conditions of the -LaTeX Project Public License (LPPL), either version 1.3c of this -license or (at your option) any later version. The latest version -of this license is in the file - - http://www.latex-project.org/lppl.txt - -This file is part of the "l3kernel bundle" (The Work in LPPL) -and all files in that bundle must be distributed together. - -The released version of this bundle is available from CTAN. - -\fi - -\documentclass{l3doc} -\usepackage{svn-multi} - -\svnid{$Id: l3styleguide.tex 2772 2011-09-07 15:07:41Z joseph $} -\def\filedate{\svnfileyear/\svnfilemonth/\svnfileday} - -\title{% - The \LaTeX3 kernel: style guide for code authors% - \thanks - {% - This file describes v\svnfilerev, - last revised \filedate. - }% -} -\author{% - The \LaTeX3 Project\thanks - {% - E-mail: - \href{mailto:latex-team@latex-project.org}% - {latex-team@latex-project.org}% - }% -} -\date{Released \filedate} - -\begin{document} - -\maketitle - -\tableofcontents - -\section{Introduction} - -This document is intended as a style guide for authors of code and -documentation for the \LaTeX3 kernel. It covers both aspects of coding -style and the formatting of the sources. The aim of providing these -guidelines is help ensure consistency of the code and sources from -different authors. Experience suggests that in the long-term this helps -with maintenance. There will of course be places where there are -exceptions to these guidelines: common sense should always be -applied! - -\section{Documentation style} - -\LaTeX3 source and documentation should be written using the document -class \cls{l3doc} in \file{dtx} format. This class provides a number -of logical mark up elements, which should be used where possible. -In the main, this is standard \LaTeX{} practice, but there are a -few points to highlight: -\begin{itemize} - \item - Where possible, use \cs{cs} to mark up control sequences - rather than using a verbatim environment. - \item - Arguments which are given in braces should be marked using - \cs{Arg} when code-level functions are discussed, but using - \cs{marg} for document functions. - \item - The names \TeX{}, \LaTeX{}, \emph{etc}.\ use the normal logical mark - up followed by an empty group (|{}|), with the exception of |\LaTeX3|, - where the number should follow directly. - \item - Where in line verbatim text is used, it should be marked up - using the \verb=|...|= construct (\emph{i.e.}~vertical bars delimit - the verbatim text). - \item In line quotes should be marked up using the \cs{enquote} - function. - \item - Where numbers in the source have a mathematical meaning, - they should be included in math mode. Such in-line math mode - material should be marked up using |$...$| and \emph{not} - |\(...\)|. -\end{itemize} - -Line length in the source files should to be under $80$ -characters where possible, as this helps keep everything on the screen -when editing files. In the \file{dtx} format, documentation lines start -with a \texttt{\%}, which is usually followed by a space to leave a -\enquote{comment margin} at the start of each line. - -As with code indenting (see later), nested environments and arguments -should be indented by (at least) two spaces to make the nature of the nesting -clear. Thus for example a typical arrangement for the \env{function} -environment might be -\begin{verbatim*} -\begin{function}{\seq_gclear:N, \seq_gclear:c} - \begin{syntax} - \cs{seq_gclear:N} \meta{sequence} - \end{syntax} - Clears all entries from the \meta{sequence} globally. -\end{function} -\end{verbatim*} -The \enquote{outer} \verb*|% \begin{function}| should have the customary -space after the |%| character at the start of the line. - -In general, a single \env{function} or \env{macro} environment should be -used for a group of closely-related functions, for example argument -specification variants. In such cases, a comma-separated list should be -used, as shown in the preceding example. - -\section{Format of the code itself} - -The requirement for less than $80$ characters per line applies to the code -itself as well as the surrounding documentation. A number of the general -style principals for \LaTeX3 code apply: these are described in the following -paragraph and an example is then given. - -With the exception of simple runs of parameter (|{#1}|, |#1#2|, -\emph{etc.}), everything should divided up using spaces to make the code -more readable. In general, these will be single spaces, but in some -places it makes more sense to align parts of the code to emphasise -similarity. (Tabs should not be used for introducing white space.) - -Each conceptually-separate step in a function should be on a separate -line, to make the meaning clearer. Hence the \texttt{false} branch -in the example uses two lines for the two auxiliary function uses. - -Within the definition, a two-space indent should be used to show each -\enquote{level} of code. Thus in the example \cs{tl_if_empty:nTF} is -indented by two spaces, but the two branches are indented by four -spaces. Within the \texttt{false} branch, the need for multiple lines -means that an additional two-space indent should be used to show that -these lines are all part of the brace group. - -The result of these lay-out conventions is code which will in general -look like the example: -\begin{verbatim*} -\cs_new:Npn \module_foo:nn #1#2 - { - \tl_if_empty:nTF {#1} - { \module_foo_aux:n { X #2 } } - { - \module_foo_aux:nn {#1} {#2} - \module_foo_aux:n {#1#2} - } - } -\end{verbatim*} - -\section{Code conventions} - -When using \cs{cs_generate_variant:Nn}, group related variants together -to make the pattern clearer. A common example is variants of a function -which has an \texttt{N}-type first argument: -\begin{verbatim*} -\cs_generate_variant:Nn \foo:Nn { NV , No } -\cs_generate_variant:Nn \foo:Nn { c , cV , co } -\end{verbatim*} - -There are cases where omitting braces from \texttt{o}-type arguments -is desirable for performance reasons. This should only be done if the -argument is a single token, thus for example -\begin{verbatim} -\tl_set:No \l_some_tl \l_some_other_tl -\end{verbatim} -remains clear and can be used where appropriate. - -\end{document} diff --git a/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.pdf b/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.pdf index d19a6e07d19..f8eec0523b8 100644 Binary files a/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.pdf and b/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.pdf differ diff --git a/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.tex b/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.tex deleted file mode 100644 index 31b07550060..00000000000 --- a/Master/texmf-dist/doc/latex/l3kernel/l3syntax-changes.tex +++ /dev/null @@ -1,80 +0,0 @@ -\iffalse meta-comment - -File l3syntax-changes.tex Copyright (C) 2011 The LaTeX3 Project - -It may be distributed and/or modified under the conditions of the -LaTeX Project Public License (LPPL), either version 1.3c of this -license or (at your option) any later version. The latest version -of this license is in the file - - http://www.latex-project.org/lppl.txt - -This file is part of the "l3kernel bundle" (The Work in LPPL) -and all files in that bundle must be distributed together. - -The released version of this bundle is available from CTAN. - -\fi - -\documentclass{l3doc} - -\usepackage{svn-multi} - -\svnid{$Id: l3syntax-changes.tex 2772 2011-09-07 15:07:41Z joseph $} -\def\filedate{\svnfileyear/\svnfilemonth/\svnfileday} - -\title{% - Syntax changes in \LaTeX3 functions - \thanks - {% - This file describes v\svnfilerev, - last revised \filedate. - }% -} -\author{% - The \LaTeX3 Project\thanks - {% - E-mail: - \href{mailto:latex-team@latex-project.org}% - {latex-team@latex-project.org}% - }% -} -\date{Released \filedate} - -\newcommand{\TF}{\textit{(TF)}} - -\begin{document} - -\maketitle - -This file lists functions whose syntax has changed after August 2011, -with an approximate date. - -\section{August 2011} - -\begin{itemize} - \item \cs{tl_if_single:n\TF} recognized any non-zero number of - explicit spaces as \meta{true}, and did not ignore trailing spaces. - Now it is \meta{true} for - \[ - \meta{optional spaces} - \meta{normal token or brace group} - \meta{optional spaces}. - \] - \item \cs{tl_reverse:n} stripped outer braces and lost unprotected spaces. - Now it keeps spaces, leaves unbraced single tokens unbraced, and - braced groups braced. - \item \cs{tl_trim_spaces:n} only removed one leading and trailing space. - Now removes recursively. Also, on the left it used to strip implicit - and explicit spaces with any character code. Now it strips only explicit - space characters $(32,10)$. -\end{itemize} - -\section{September 2011} - -\begin{itemize} -\item clist functions which receive an \texttt{n}-type comma list argument - now trim spaces from each item in the argument. -\end{itemize} - -\end{document} \ No newline at end of file diff --git a/Master/texmf-dist/doc/latex/l3kernel/source3.pdf b/Master/texmf-dist/doc/latex/l3kernel/source3.pdf index 156c4baaf35..f4cbf6eaa9c 100644 Binary files a/Master/texmf-dist/doc/latex/l3kernel/source3.pdf and b/Master/texmf-dist/doc/latex/l3kernel/source3.pdf differ diff --git a/Master/texmf-dist/doc/latex/l3kernel/source3.tex b/Master/texmf-dist/doc/latex/l3kernel/source3.tex deleted file mode 100644 index e8b76f8701e..00000000000 --- a/Master/texmf-dist/doc/latex/l3kernel/source3.tex +++ /dev/null @@ -1,106 +0,0 @@ -% \iffalse meta-comment -% -%% File: source3.tex Copyright (C) 1990-2011 The LaTeX3 Project -%% -%% It may be distributed and/or modified under the conditions of the -%% LaTeX Project Public License (LPPL), either version 1.3c of this -%% license or (at your option) any later version. The latest version -%% of this license is in the file -%% -%% http://www.latex-project.org/lppl.txt -%% -%% This file is part of the "l3kernel bundle" (The Work in LPPL) -%% and all files in that bundle must be distributed together. -%% -%% The released version of this bundle is available from CTAN. -%% -%% ----------------------------------------------------------------------- -%% -%% The development version of the bundle can be found at -%% -%% http://www.latex-project.org/svnroot/experimental/trunk/ -%% -%% for those people who are interested. -%% -%%%%%%%%%%% -%% NOTE: %% -%%%%%%%%%%% -%% -%% Snapshots taken from the repository represent work in progress and may -%% not work or may contain conflicting material! We therefore ask -%% people _not_ to put them into distributions, archives, etc. without -%% prior consultation with the LaTeX3 Project. -%% -%% ----------------------------------------------------------------------- -% -% \fi - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% This document will typeset the LaTeX3 sources as a single document. -% This will produce quite a large file (more than 400 pages). -% -% There is also a shorter version (interface3.tex) that only typesets the -% command % interface descriptions. -% -% Do not forget to generate the index (as explained on the terminal output -% near the end of the run)! -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -\documentclass{l3doc} -\listfiles - -\begin{document} - -\title{The \LaTeX3 Sources} -\author{% - The \LaTeX3 Project\thanks - {% - E-mail: - \href{mailto:latex-team@latex-project.org} - {latex-team@latex-project.org}% - }% -} - -\pagenumbering{roman} -\maketitle - -% -% First load all modules and typeset the documentation parts -% - -\input{source3body} % all the individual modules - -% -% Now reload all modules and typeset the implementation parts -% - -\part{Implementation} - -\def\maketitle{} -\EnableImplementation -\DisableDocumentation -\DocInputAgain - -\clearpage -\pagestyle{headings} - -% Make TeX shut up. -\hbadness=10000 -\newcount\hbadness -\hfuzz=\maxdimen - -\PrintChanges -\clearpage - -\begingroup - \def\endash{--} - \catcode`\-\active - \def-{\futurelet\temp\indexdash} - \def\indexdash{\ifx\temp-\endash\fi} - - \DelayPrintIndex -\endgroup - -\end{document} \ No newline at end of file diff --git a/Master/texmf-dist/doc/latex/l3kernel/source3body.tex b/Master/texmf-dist/doc/latex/l3kernel/source3body.tex deleted file mode 100644 index 119886c86cb..00000000000 --- a/Master/texmf-dist/doc/latex/l3kernel/source3body.tex +++ /dev/null @@ -1,421 +0,0 @@ -% \iffalse meta-comment -% -%% File: source3body.tex Copyright (C) 1990-2011 The LaTeX3 Project -%% -%% It may be distributed and/or modified under the conditions of the -%% LaTeX Project Public License (LPPL), either version 1.3c of this -%% license or (at your option) any later version. The latest version -%% of this license is in the file -%% -%% http://www.latex-project.org/lppl.txt -%% -%% This file is part of the "l3kernel bundle" (The Work in LPPL) -%% and all files in that bundle must be distributed together. -%% -%% The released version of this bundle is available from CTAN. -%% -%% ----------------------------------------------------------------------- -%% -%% The development version of the bundle can be found at -%% -%% http://www.latex-project.org/svnroot/experimental/trunk/ -%% -%% for those people who are interested. -%% -%%%%%%%%%%% -%% NOTE: %% -%%%%%%%%%%% -%% -%% Snapshots taken from the repository represent work in progress and may -%% not work or may contain conflicting material! We therefore ask -%% people _not_ to put them into distributions, archives, etc. without -%% prior consultation with the LaTeX3 Project. -%% -%% ----------------------------------------------------------------------- -% -% \fi - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% This file is used by -% -% source3.tex % documentation including implementation -% -% interface3.tex % only interface documentation -% -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - -\begin{abstract} - -\setlength\parindent{0pt} -\setlength\parskip{\baselineskip} - -\noindent -This is the reference documentation for the \pkg{expl3} -programming environment. The \pkg{expl3} modules set up an experimental -naming scheme for \LaTeX{} commands, which allow the \LaTeX{} programmer -to systematically name functions and variables, and specify the argument -types of functions. - -The \TeX{} and \eTeX{} primitives are all given a new name according to -these conventions. However, in the main direct use of the primitives is -not required or encouraged: the \pkg{expl3} modules define an -independent low-level \LaTeX3 programming language. - -At present, the \pkg{expl3} modules are designed to be loaded on top of -\LaTeXe{}. In time, a \LaTeX3 format will be produced based on this code. -This allows the code to be used in \LaTeXe{} packages \emph{now} while a -stand-alone \LaTeX3 is developed. - -\begin{bfseries} - While \pkg{expl3} is still experimental, the bundle is now regarded as - broadly stable. The syntax conventions and functions provided are now - ready for wider use. There may still be changes to some functions, but - these will be minor when compared to the scope of \pkg{expl3}. - - New modules will be added to the distributed version of \pkg{expl3} as - they reach maturity. -\end{bfseries} - -\end{abstract} - -\clearpage - -{% - \def\\{:}% fix "newlines" in the ToC - \tableofcontents -} - -\clearpage -\pagenumbering{arabic} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Each of the following \DocInput lines includes a file with extension -% .dtx. Each of these files may be typeset separately. For instance -% pdflatex l3box.dtx -% will typeset the source of the LaTeX3 box commands. If you use the -% Makefile, the index will be generated automatically; e.g., -% make doc F=l3box -% -% If this file is processed, each of these separate dtx files will be -% contained as a part of a single document. -% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -\makeatletter -\def\partname{Part} -\def\maketitle{\clearpage\part{\@title}} -\let\thanks\@gobble -\let\DelayPrintIndex\PrintIndex -\let\PrintIndex\@empty -\makeatother - -\part{Introduction to \pkg{expl3} and this document} - -This document is intended to act as a comprehensive reference manual -for the \pkg{expl3} language. A general guide to the \LaTeX3 -programming language is found in \href{expl3.pdf}{expl3.pdf}. - -\section{Naming functions and variables} - -\LaTeX3 does not use \texttt{@} as a \enquote{letter} for defining -internal macros. Instead, the symbols |_| and \texttt{:} -are used in internal macro names to provide structure. The name of -each \emph{function} is divided into logical units using \texttt{_}, -while \texttt{:} separates the \emph{name} of the function from the -\emph{argument specifier} (\enquote{arg-spec}). This describes the arguments -expected by the function. In most cases, each argument is represented -by a single letter. The complete list of arg-spec letters for a function -is referred to as the \emph{signature} of the function. - -Each function name starts with the \emph{module} to which it belongs. -Thus apart from a small number of very basic functions, all \pkg{expl3} -function names contain at least one underscore to divide the module -name from the descriptive name of the function. For example, all -functions concerned with comma lists are in module \texttt{clist} and -begin \cs{clist_}. - -Every function must include an argument specifier. For functions which -take no arguments, this will be blank and the function name will end -\texttt{:}. Most functions take one or more arguments, and use the -following argument specifiers: -\begin{description} - \item[\texttt{D}] The \texttt{D} specifier means \emph{do not use}. - All of the \TeX{} primitives are initially \cs{let} to a \texttt{D} - name, and some are then given a second name. Only the kernel - team should use anything with a \texttt{D} specifier! - \item[\texttt{N} and \texttt{n}] These mean \emph{no manipulation}, - of a single token for \texttt{N} and of a set of tokens given in - braces for \texttt{n}. Both pass the argument through exactly as - given. Usually, if you use a single token for an \texttt{n} argument, - all will be well. - \item[\texttt{c}] This means \emph{csname}, and indicates that the - argument will be turned into a csname before being used. So - So \cs{foo:c} |{ArgumentOne}| will act in the same way as \cs{foo:N} - \cs{ArgumentOne}. - \item[\texttt{V} and \texttt{v}] These mean \emph{value - of variable}. The \texttt{V} and \texttt{v} specifiers are used to - get the content of a variable without needing to worry about the - underlying \TeX{} structure containing the data. A \texttt{V} - argument will be a single token (similar to \texttt{N}), for example - \cs{foo:V} \cs{MyVariable}; on the other hand, using \texttt{v} a - csname is constructed first, and then the value is recovered, for - example \cs{foo:v} |{MyVariable}|. - \item[\texttt{o}] This means \emph{expansion once}. In general, the - \texttt{V} and \texttt{v} specifiers are favoured over \texttt{o} - for recovering stored information. However, \texttt{o} is useful - for correctly processing information with delimited arguments. - \item[\texttt{x}] The \texttt{x} specifier stands for \emph{exhaustive - expansion}: every token in the argument is fully expanded until only - unexpandable ones remain. The \TeX{} \tn{edef} primitive carries out - this type of expansion. Functions which feature an \texttt{x}-type - argument are in general \emph{not} expandable, unless specifically - noted. - \item[\texttt{f}] The \texttt{f} specifier stands for \emph{full - expansion}, and in contrast to \texttt{x} stops at the first - non-expandable item (reading the argument from left to right) without - trying to expand it. For example, when setting a token list - variable (a macro used for storage), the sequence - \begin{verbatim} - \tl_set:Nn \l_mya_tl { A } - \tl_set:Nn \l_myb_tl { B } - \tl_set:Nf \l_mya_tl { \l_mya_tl \l_myb_tl } - \end{verbatim} - will leave |\l_mya_tl| with the content |A\l_myb_tl|, as |A| cannot - be expanded and so terminates expansion before |\l_myb_tl| is considered. - \item[\texttt{T} and \texttt{F}] For logic tests, there are the branch - specifiers \texttt{T} (\emph{true}) and \texttt{F} (\emph{false}). - Both specifiers treat the input in the same way as \texttt{n} (no - change), but make the logic much easier to see. - \item[\texttt{p}] The letter \texttt{p} indicates \TeX{} - \emph{parameters}. Normally this will be used for delimited - functions as \pkg{expl3} provides better methods for creating simple - sequential arguments. - \item[\texttt{w}] Finally, there is the \texttt{w} specifier for - \emph{weird} arguments. This covers everything else, but mainly - applies to delimited values (where the argument must be terminated - by some arbitrary string). -\end{description} -Notice that the argument specifier describes how the argument is -processed prior to being passed to the underlying function. For example, -\cs{foo:c} will take its argument, convert it to a control sequence and -pass it to \cs{foo:N}. - -Variables are named in a similar manner to functions, but begin with -a single letter to define the type of variable: -\begin{description} - \item[\texttt{c}] Constant: global parameters whose value should not - be changed. - \item[\texttt{g}] Parameters whose value should only be set globally. - \item[\texttt{l}] Parameters whose value should only be set locally. -\end{description} -Each variable name is then build up in a similar way to that of a -function, typically starting with the module\footnote{The module names are - not used in case of generic scratch registers defined in the data - type modules, e.g., the - \texttt{int} module contains some scratch variables called \cs{l_tmpa_int}, - \cs{l_tmpb_int}, and so on. In such a case adding the module name up front - to denote the module - and in the back to indicate the type, as in - \cs{l_int_tmpa_int} would be very unreadable.} name -and then a descriptive part. -Variables end with a short identifier to show the variable type: -\begin{description} - \item[\texttt{bool}] Either true or false. - \item[\texttt{box}] Box register. - \item[\texttt{clist}] Comma separated list. - \item[\texttt{coffin}] a \enquote{box with handles} --- a higher-level data - type for carrying out |box| alignment operations. - \item[\texttt{dim}] \enquote{Rigid} lengths. - \item[\texttt{fp}] floating-point values; - \item[\texttt{int}] Integer-valued count register. - \item[\texttt{prop}] Property list. - \item[\texttt{seq}] \enquote{Sequence}: a data-type used to implement lists - (with access at both ends) and stacks. - \item[\texttt{skip}] \enquote{Rubber} lengths. - \item[\texttt{stream}] An input or output stream (for reading from or - writing to, respectively). - \item[\texttt{tl}] Token list variables: placeholder for a token list. -\end{description} - -\subsection{Terminological inexactitude} - -A word of warning. In this document, and others referring to the \pkg{expl3} -programming modules, we often refer to \enquote{variables} and -\enquote{functions} as if they -were actual constructs from a real programming language. In truth, \TeX{} -is a macro processor, and functions are simply macros that may or may not take -arguments and expand to their replacement text. Many of the common variables -are \emph{also} macros, and if placed into the input stream will simply expand -to their definition as well~--- a \enquote{function} with no arguments and a -\enquote{token list variable} are in truth one and the same. On the other -hand, some \enquote{variables} are actually registers that must be -initialised and their values set and retrieved with specific functions. - -The conventions of the \pkg{expl3} code are designed to clearly separate the -ideas of \enquote{macros that contain data} and -\enquote{macros that contain code}, and a -consistent wrapper is applied to all forms of \enquote{data} whether they be -macros or -actually registers. This means that sometimes we will use phrases like -\enquote{the function returns a value}, when actually we just mean -\enquote{the macro expands to something}. Similarly, the term -\enquote{execute} might be used in place of \enquote{expand} -or it might refer to the more specific case of -\enquote{processing in \TeX's stomach} -(if you are familiar with the \TeX{}book parlance). - -If in doubt, please ask; chances are we've been hasty in writing certain -definitions and need to be told to tighten up our terminology. - -\section{Documentation conventions} - -This document is typeset with the experimental \pkg{l3doc} class; -several conventions are used to help describe the features of the code. -A number of conventions are used here to make the documentation clearer. - -Each group of related functions is given in a box. For a function with -a \enquote{user} name, this might read: -\begin{function}{\ExplSyntaxOn, \ExplSyntaxOff} - \begin{syntax} - \cs{ExplSyntaxOn} \dots{} \cs{ExplSyntaxOff} - \end{syntax} - The textual description of how the function works would appear here. The - syntax of the function is shown in mono-spaced text to the right of - the box. In this example, the function takes no arguments and so the - name of the function is simply reprinted. -\end{function} - -For programming functions, which use \texttt{_} and \texttt{:} in their name -there are a few additional conventions: If two related functions are given -with identical names but different argument specifiers, these are termed -\emph{variants} of each other, and the latter functions are printed in grey to -show this more clearly. They will carry out the same function but will take -different types of argument: -\begin{function}{\seq_new:N, \seq_new:c} - \begin{syntax} - \cs{seq_new:N} \meta{sequence} - \end{syntax} - When a number of variants are described, the arguments are usually - illustrated only for the base function. Here, \meta{sequence} indicates - that \cs{seq_new:N} expects the name of a sequence. From the argument - specifier, \cs{seq_new:c} also expects a sequence name, but as a - name rather than as a control sequence. Each argument given in the - illustration should be described in the following text. -\end{function} - -\paragraph{Fully expandable functions} -\hypertarget{expstar}{Some functions are fully expandable}, -which allows it to be used within -an \texttt{x}-type argument (in plain \TeX{} terms, inside an \cs{edef}), -as well as within an \texttt{f}-type argument. -These fully expandable functions are indicated in the documentation by -a star: -\begin{function}[EXP]{\cs_to_str:N} - \begin{syntax} - \cs{cs_to_str:N} \meta{cs} - \end{syntax} - As with other functions, some text should follow which explains how - the function works. Usually, only the star will indicate that the - function is expandable. In this case, the function expects a \meta{cs}, - shorthand for a \meta{control sequence}. -\end{function} - -\paragraph{Restricted expandable functions} -\hypertarget{rexpstar}{A few functions are fully expandable} but cannot be fully expanded within -an \texttt{f}-type argument. In this case a hollow star is used to indicate -this: -\begin{function}[rEXP]{\seq_map_function:NN} - \begin{syntax} - \cs{seq_map_function:NN} \meta{seq} \meta{function} - \end{syntax} -\end{function} - -\paragraph{Conditional functions} -\hypertarget{explTF}{Conditional (\texttt{if}) functions} -are normally defined in three variants, with -\texttt{T}, \texttt{F} and \texttt{TF} argument specifiers. This allows -them to be used for different \enquote{true}/\enquote{false} branches, -depending on -which outcome the conditional is being used to test. To indicate this -without repetition, this information is given in a shortened form: -\begin{function}[EXP,TF]{\xetex_if_engine:} - \begin{syntax} - \cs{xetex_if_engine:TF} \Arg{true code} \Arg{false code} - \end{syntax} - The underlining and italic of \texttt{TF} indicates that - \cs{xetex_if_engine:T}, \cs{xetex_if_engine:F} and - \cs{xetex_if_engine:TF} are all available. Usually, the illustration - will use the \texttt{TF} variant, and so both \meta{true code} - and \meta{false code} will be shown. The two variant forms \texttt{T} and - \texttt{F} take only \meta{true code} and \meta{false code}, respectively. - Here, the star also shows that this function is expandable. - With some minor exceptions, \emph{all} conditional functions in the - \pkg{expl3} modules should be defined in this way. -\end{function} - -Variables, constants and so on are described in a similar manner: -\begin{variable}{\l_tmpa_tl} - A short piece of text will describe the variable: there is no - syntax illustration in this case. -\end{variable} - -In some cases, the function is similar to one in \LaTeXe{} or plain \TeX{}. -In these cases, the text will include an extra \enquote{\textbf{\TeX{}hackers -note}} section: -\begin{function}[EXP]{\token_to_str:N} - \begin{syntax} - \cs{token_to_str:N} \meta{token} - \end{syntax} - The normal description text. - \begin{texnote} - Detail for the experienced \TeX{} or \LaTeXe\ programmer. In this - case, it would point out that this function is the \TeX{} primitive - \cs{string}. - \end{texnote} -\end{function} - -\section{Formal language conventions which apply generally} - -As this is a formal reference guide for \LaTeX3 programming, the descriptions -of functions are intended to be reasonably \enquote{complete}. However, there -is also a need to avoid repetition. Formal ideas which apply to general -classes of function are therefore summarised here. - -For tests which have a \texttt{TF} argument specification, the test if -evaluated to give a logically \texttt{TRUE} or \texttt{FALSE} result. -Depending on this result, either the \meta{true code} or the \meta{false code} -will be left in the input stream. In the case where the test is expandable, -and a predicate (|_p|) variant is available, the logical value determined by -the test is left in the input stream: this will typically be part of a larger -logical construct. - -\DisableImplementation - -\DocInput{l3bootstrap.dtx} -\DocInput{l3names.dtx} -\DocInput{l3basics.dtx} -\DocInput{l3expan.dtx} -\DocInput{l3prg.dtx} -\DocInput{l3quark.dtx} -\DocInput{l3token.dtx} -\DocInput{l3int.dtx} -\DocInput{l3skip.dtx} -\DocInput{l3tl.dtx} -\DocInput{l3seq.dtx} -\DocInput{l3clist.dtx} -\DocInput{l3prop.dtx} -\DocInput{l3box.dtx} -\DocInput{l3coffins.dtx} -\DocInput{l3color.dtx} -\DocInput{l3io.dtx} -\DocInput{l3msg.dtx} -\DocInput{l3keys.dtx} -\DocInput{l3file.dtx} -\DocInput{l3fp.dtx} -\DocInput{l3luatex.dtx} - -\endinput -- cgit v1.2.3