From a5ed6b49fd24fce0a996e8db92f76022c41c5007 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Tue, 21 Jul 2020 17:15:56 +0000 Subject: add tlmgr.html and install-tl.html to runtime, request by rdt git-svn-id: svn://tug.org/texlive/trunk@55897 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/texlive/install-tl.html | 452 ++++++++++++++++++++++++++ 1 file changed, 452 insertions(+) create mode 100644 Master/texmf-dist/doc/texlive/install-tl.html (limited to 'Master/texmf-dist/doc/texlive/install-tl.html') diff --git a/Master/texmf-dist/doc/texlive/install-tl.html b/Master/texmf-dist/doc/texlive/install-tl.html new file mode 100644 index 00000000000..3acf610924f --- /dev/null +++ b/Master/texmf-dist/doc/texlive/install-tl.html @@ -0,0 +1,452 @@ + + + + +install-tl - TeX Live cross-platform installer + + + + + + + + + + +

NAME

+ +

install-tl - TeX Live cross-platform installer

+ +

SYNOPSIS

+ +

install-tl [option]...

+ +

install-tl-windows.bat [option]...

+ +

install-tl-advanced.bat [option]...

+ +

DESCRIPTION

+ +

This installer creates a runnable TeX Live installation from various media, including over the network, from local hard disk, a DVD, etc. The installer works on all platforms supported by TeX Live. For information on initially downloading TeX Live, see https://tug.org/texlive/acquire.html.

+ +

The basic idea of TeX Live installation is for you to choose one of the top-level schemes, each of which is defined as a different set of collections and packages, where a collection is a set of packages, and a package is what contains actual files.

+ +

Within the installer, you can choose a scheme, and further customize the set of collections to install, but not the set of the packages. To work at the package level, use tlmgr (reference just below) after the initial installation is complete.

+ +

The default is scheme-full, which installs everything, and this is highly recommended.

+ +

REFERENCES

+ +

Post-installation configuration, package updates, and more, are handled through tlmgr(1), the TeX Live Manager (https://tug.org/texlive/tlmgr.html).

+ +

The most up-to-date version of this installer documentation is on the Internet at https://tug.org/texlive/doc/install-tl.html.

+ +

For the full documentation of TeX Live, see https://tug.org/texlive/doc.

+ +

OPTIONS

+ +

As usual, all options can be specified in any order, and with either a leading - or --. An argument value can be separated from its option by either a space or =.

+ +
+ +
-gui [[=]module]
+
+ +

If no module is given, starts the Tcl/Tk (see below) GUI installer.

+ +

If module is given loads the given installer module. Currently the following modules are supported:

+ +
+ +
text
+
+ +

The text mode user interface (default on Unix systems). Same as the -no-gui option.

+ +
+
tcl (or "perltk" or "wizard" or "expert" or nothing)
+
+ +

The Tcl/Tk user interface (default on Macs and Windows). It starts with a small number of configuration options, roughly equivalent to what the former wizard option offers, but a button Advanced takes you to a screen with roughly the same options as the former perltk interface.

+ +
+
+ +

The default GUI requires Tcl/Tk. This is standard on Macs (although it is considered deprecated since Catalina) and is often already installed on GNU/Linux. For Windows, TeX Live provides a Tcl/Tk runtime.

+ +
+
-no-gui
+
+ +

Use the text mode installer (default except on Windows and Macs).

+ +
+
-lang llcode
+
+ +

By default, the Tcl GUI uses the language detection built into Tcl/Tk. If that fails you can select a different language by giving this option with a language code (based on ISO 639-1). Currently supported (but not necessarily completely translated) are: English (en, default), Czech (cs), German (de), French (fr), Italian (it), Japanese (ja), Dutch (nl), Polish (pl), Brazilian Portuguese (pt_BR), Russian (ru), Slovak (sk), Slovenian (sl), Serbian (sr), Ukrainian (uk), Vietnamese (vi), simplified Chinese (zh_CN), and traditional Chinese (zh_TW).

+ +
+
-repository url|path
+
+ +

Specify the package repository to be used as the source of the installation. In short, this can be a directory name or a url using http(s), ftp, or scp. The documentation for tlmgr has the details (https://tug.org/texlive/doc/tlmgr.html#OPTIONS).

+ +

For installation, the default is to pick a mirror automatically, using http://mirror.ctan.org/systems/texlive/tlnet; the chosen mirror is used for the entire download. You can use the special argument ctan as an abbreviation for this. (See https://ctan.org for more about CTAN and its mirrors.)

+ +

After installation is complete, you can use that installation as the repository for another installation. If you chose to install less than the full scheme containing all packages, the list of available schemes will be adjusted accordingly.

+ +
+
-select-repository
+
+ +

This option allows you to choose a particular mirror from the current list of active CTAN mirrors. This option is supported in the text and gui installer modes, and will also offer to install from local media if available, or from a repository specified on the command line. It's useful when the (default) automatic redirection does not choose a good host for you.

+ +
+
-all-options
+
+ +

Normally options not relevant to the current platform are not shown (e.g., when running on Unix, Windows-specific options are omitted). Giving this command line option allows configuring such "foreign" settings.

+ +
+
-custom-bin path
+
+ +

If you have built your own set of TeX Live binaries (perhaps because your platform was not supported by TeX Live out of the box), this option allows you to specify the path to a directory where the binaries for the current system are present. The installation will continue as usual, but at the end all files from path are copied over to bin/custom/ under your installation directory and this bin/custom/ directory is what will be added to the path for the post-install actions. To install multiple custom binary sets, manually rename custom before doing each.

+ +

For more information on custom binaries, see https://tug.org/texlive/custom-bin.html. For general information on building TeX Live, see https://tug.org/texlive/build.html.

+ +
+
-debug-translation
+
+ +

In the former Perl/Tk GUI modes, this option reported any missing, or more likely untranslated, messages to standard error. Not yet implemented for the Tcl interface. Helpful for translators to see what remains to be done.

+ +
+
-force-platform platform
+
+ +

Instead of auto-detecting the current platform, use platform. Binaries for this platform must be present and they must actually be runnable, or installation will fail. -force-arch is a synonym.

+ +
+
-help, --help, -?
+
+ +

Display this help and exit. (This help is also on the web at https://tug.org/texlive/doc/install-tl.html). Sometimes the perldoc and/or PAGER programs on the system have problems, possibly resulting in control characters being literally output. This can't always be detected, but you can set the NOPERLDOC environment variable and perldoc will not be used.

+ +
+
-in-place
+
+ +

This is a quick-and-dirty installation option in case you already have an rsync or svn checkout of TeX Live. It will use the checkout as-is and will just do the necessary post-install. Be warned that the file tlpkg/texlive.tlpdb may be rewritten, that removal has to be done manually, and that the only realistic way to maintain this installation is to redo it from time to time. This option is not available via the installer interfaces. USE AT YOUR OWN RISK.

+ +
+
-init-from-profile profile_file
+
+ +

Similar to -profile (see "PROFILES" below), but only initializes the installation configuration from profile_file and then starts a normal interactive session. Environment variables are not ignored.

+ +
+
-logfile file
+
+ +

Write both all messages (informational, debugging, warnings) to file, in addition to standard output or standard error.

+ +

If this option is not given, the installer will create a log file in the root of the writable installation tree, for example, /usr/local/texlive/YYYY/install-tl.log for the YYYY release.

+ +
+
-no-cls
+
+ +

For the text mode installer only: do not clear the screen when entering a new menu (for debugging purposes).

+ +
+
-no-persistent-downloads
+
+ +
+
-persistent-downloads
+
+ +

For network installs, activating this option makes the installer try to set up a persistent connection using the Net::LWP Perl module. This opens only one connection between your computer and the server per session and reuses it, instead of initiating a new download for each package, which typically yields a significant speed-up.

+ +

This option is turned on by default, and the installation program will fall back to using wget if this is not possible. To disable usage of LWP and persistent connections, use -no-persistent-downloads.

+ +
+
-no-verify-downloads
+
+ +

By default, if a GnuPG gpg binary is found in PATH, downloads are verified against a cryptographic signature. This option disables such verification. The full description is in the Crytographic Verification section of the tlmgr documentation, e.g., https://tug.org/texlive/doc/tlmgr.html#CRYPTOGRAPHIC-VERIFICATION

+ +
+
-non-admin
+
+ +

For Windows only: configure for the current user, not for all users.

+ +
+
-portable
+
+ +

Install for portable use, e.g., on a USB stick. Also selectable from within the perltk and text installers.

+ +
+ +
+ +

Print the TeX Live identifier for the detected platform (hardware/operating system) combination to standard output, and exit. -print-arch is a synonym.

+ +
+
-profile profile_file
+
+ +

Load profile_file and do the installation with no user interaction, that is, a batch (unattended) install. Environment variables are ignored. See "PROFILES" below.

+ +
+
-q
+
+ +

Omit normal informational messages.

+ +
+
-scheme scheme
+
+ +

Schemes are the highest level of package grouping in TeX Live; the default is to use the full scheme, which includes everything. This option overrides that default. You can change the scheme again before the actual installation with the usual menu. The scheme argument may optionally have a prefix scheme-. The list of supported scheme names depends on what your package repository provides; see the interactive menu list.

+ +
+
-v
+
+ +

Include verbose debugging messages; repeat for maximum debugging: -v -v. (Further repeats are accepted but ignored.)

+ +
+
-version, --version
+
+ +

Output version information and exit. If -v is also given, the versions of the TeX Live modules used are also reported.

+ +
+
+ +

PROFILES

+ +

A profile file contains all the values needed to perform an installation. After a normal installation has finished, a profile for that exact installation is written to the file tlpkg/texlive.profile. In addition, from the text menu one can select P to save the current setup as a profile at any time.

+ +

Such a profile file can be given as the argument to -profile, for example to redo the exact same installation on a different system. Alternatively, you can use a custom profile, most easily created by starting from a generated one and changing values, or an empty file, which will take all the defaults.

+ +

As mentioned above, the installer only supports selection by scheme and collections, not individual packages, so packages cannot be specified in profile files either. Use tlmgr to work at the package level.

+ +

Within a profile file, each line consists of

+ +

variable [value]

+ +

except for comment lines starting with #. The possible variable names are listed below. Values, when present, are either 0 or 1 for booleans, or strings (which must be specified without any quote characters). Leading whitespace is ignored.

+ +

If the variable selected_scheme is defined and no collection variables at all are defined, then the collections required by the specified scheme (which might change over time) are installed, without explicitly listing them. This eases maintenance of profile files. If any collections are specified in a profile, though, then all desired collections must be given explicitly.

+ +

For example, a line

+ +
  selected_scheme scheme-small
+ +

along with definitions for the installation directories (given below under "path options") suffices to install the "small" scheme with all default options. The schemes are described in the S menu in the text installer, or equivalent.

+ +

Besides selected_scheme, here is the list of variable names supported in a profile:

+ +

collection options (prefix collection-)

+ +

Collections are specified with a variable name with the prefix collection- followed by a collection name; there is no value. For instance, collection-basic. The collections are described in the C menu.

+ +

Schemes and collections (and packages) are ultimately defined by the files in the tlpkg/tlpsrc/ source directory.

+ +

path options

+ +

It is best to define all of these, even though they may not be used in the installation, so as to avoid unintentionally getting a default value that could cause problems later.

+ +
  TEXDIR
+  TEXMFCONFIG
+  TEXMFVAR
+  TEXMFHOME
+  TEXMFLOCAL
+  TEXMFSYSCONFIG
+  TEXMFSYSVAR
+ +

installer options (prefix instopt_)

+ +
+ +
instopt_adjustpath (default 0 on Unix, 1 on Windows)
+
+ +

Adjust PATH environment variable.

+ +
+
instopt_adjustrepo (default 1)
+
+ +

Set remote repository to a multiplexed CTAN mirror after installation; see -repository above.

+ +
+
instopt_letter (default 0)
+
+ +

Set letter size paper as the default, instead of a4.

+ +
+
instopt_portable (default 0)
+
+ +

Install for portable use, e.g., on a USB stick.

+ +
+
instopt_write18_restricted (default 1)
+
+ +

Enable \write18 for a restricted set of programs.

+ +
+
+ +

tlpdb options (prefix tlpdbopt_)

+ +

The definitive list is given in tlpkg/TeXLive/TLConfig.pm, in the hash %TeXLive::TLConfig::TLPDBOptions, together with explanations. All items given there except for tlpdbopt_location can be specified. Here is the current list:

+ +
  tlpdbopt_autobackup
+  tlpdbopt_backupdir
+  tlpdbopt_create_formats
+  tlpdbopt_desktop_integration
+  tlpdbopt_file_assocs
+  tlpdbopt_generate_updmap
+  tlpdbopt_install_docfiles
+  tlpdbopt_install_srcfiles
+  tlpdbopt_post_code
+  tlpdbopt_sys_bin
+  tlpdbopt_sys_info
+  tlpdbopt_sys_man
+  tlpdbopt_w32_multi_user
+ +

platform options (prefix binary_)

+ +

For each supported platform in TeX Live (directories under bin/), the variable binary_PLATFORM can be set with value 1. For example:

+ +
  binary_x86_64-linux 1
+ +

If no binary_ settings are made, the default is whatever the current machine is running.

+ +

In releases before 2017, many profile variables had different names (not documented here; see the install-tl source). They are accepted and transformed to the names given above. When a profile is written, the names above are always used.

+ +

For more details on all of the above options, consult the TeX Live installation manual, linked from https://tug.org/texlive/doc.

+ +

ENVIRONMENT VARIABLES

+ +

For ease in scripting and debugging, install-tl looks for the following environment variables. They are not of interest for normal user installations.

+ +
+ +
TEXLIVE_DOWNLOADER
+
+ +
+
TL_DOWNLOAD_PROGRAM
+
+ +
+
TL_DOWNLOAD_ARGS
+
+ +

These override the normal choice of a download program; see the tlmgr documentation, e.g., https://tug.org/texlive/doc/tlmgr.html#ENVIRONMENT-VARIABLES.

+ +
+
TEXLIVE_INSTALL_ENV_NOCHECK
+
+ +

Omit the check for environment variables containing the string tex. People developing TeX-related software are likely to have many such variables.

+ +
+
TEXLIVE_INSTALL_NO_CONTEXT_CACHE
+
+ +

Omit creating the ConTeXt cache. This is useful for redistributors.

+ +
+
TEXLIVE_INSTALL_NO_RESUME
+
+ +

Omit check for installing on top of a previous installation and then asking about importing previous settings.

+ +
+
TEXLIVE_INSTALL_NO_WELCOME
+
+ +

Omit printing the welcome message after successful installation, e.g., when testing.

+ +
+
TEXLIVE_INSTALL_PAPER
+
+ +

Set the default paper size for all relevant programs; must be either letter or a4. The default is a4.

+ +
+
TEXLIVE_INSTALL_PREFIX
+
+ +
+
TEXLIVE_INSTALL_TEXDIR
+
+ +
+
TEXLIVE_INSTALL_TEXMFCONFIG
+
+ +
+
TEXLIVE_INSTALL_TEXMFVAR
+
+ +
+
TEXLIVE_INSTALL_TEXMFHOME
+
+ +
+
TEXLIVE_INSTALL_TEXMFLOCAL
+
+ +
+
TEXLIVE_INSTALL_TEXMFSYSCONFIG
+
+ +
+
TEXLIVE_INSTALL_TEXMFSYSVAR
+
+ +

Specify the respective directories. TEXLIVE_INSTALL_PREFIX defaults to /usr/local/texlive, while TEXLIVE_INSTALL_TEXDIR defaults to the release directory within that prefix, e.g., /usr/local/texlive/2016. All the defaults can be seen by running the installer interactively and then typing D for the directory menu.

+ +
+
NOPERLDOC
+
+ +

Don't try to run the --help message through perldoc.

+ +
+
+ +

AUTHORS AND COPYRIGHT

+ +

This script and its documentation were written for the TeX Live distribution (https://tug.org/texlive) and both are licensed under the GNU General Public License Version 2 or later.

+ +

$Id: install-tl 55357 2020-05-31 20:09:55Z siepo $

+ + + + + + + -- cgit v1.2.3