From 1990374c1e9958b0ebbce5d2b170bf659c24abe3 Mon Sep 17 00:00:00 2001
From: Karl Berry <karl@freefriends.org>
Date: Sun, 26 Apr 2020 21:34:47 +0000
Subject: optex (26apr20)

git-svn-id: svn://tug.org/texlive/trunk@54893 c570f23f-e606-0410-a88d-b1316a301751
---
 Master/texmf-dist/doc/luatex/optex/optex-doc.tex | 1817 +---------------------
 1 file changed, 52 insertions(+), 1765 deletions(-)

(limited to 'Master/texmf-dist/doc/luatex/optex/optex-doc.tex')

diff --git a/Master/texmf-dist/doc/luatex/optex/optex-doc.tex b/Master/texmf-dist/doc/luatex/optex/optex-doc.tex
index 0a1b6b5d8af..b4e41b68747 100644
--- a/Master/texmf-dist/doc/luatex/optex/optex-doc.tex
+++ b/Master/texmf-dist/doc/luatex/optex/optex-doc.tex
@@ -1,28 +1,25 @@
+%% This is part of OpTeX project, see http://petr.olsak.net/optex
 
-\fontfam[LMfonts]
-\typosize[11/13]
-\enlang
-\margins/1 a4 (2,2,2,2)cm
+% Run  optex optex-doc (three times) to generate OpTeX documentation. 
 
-\catcode`<=13
-\def<#1>{\hbox{$\langle$\it#1\/$\rangle$}}
-\everyintt={\catcode`\<=13}
-\everytt=\everyintt
-\enquotes
+\input doc.opm  \let\enddocument=\endinput
 
-\def\new{\mnote{\Red$\blacktriangleleft$}}
-\fixmnotes\right
+\typosize[10/12]
 
-\activettchar`
+\let\new=\relax
 
-\hyperlinks{\Blue}{\Green}
-\insertoutline{CONTENTS} \outlines{0} 
+\begingroup \typosize [11/13.5]
+
+\insertoutline{OpTeX}
 
+\vglue1cm
+\centerline{\setfontsize{at50pt}\rm\OpTeX}
+\vskip-8mm
 
-\tit \OpTeX/\nl Format Based on Plain \TeX/ and OPmac\fnotemark1
+\tit Format Based on Plain \TeX/ and OPmac\fnotemark1
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
 
-\hfill Version 0.08
+\hfill Version 0.10
 
 \centerline{\it Petr Olšák, 2020}
 
@@ -30,39 +27,39 @@
 \centerline{\url{http://petr.olsak.net/optex}}
 
 \fnotetext {The OPmac package is a set of simple additional macros to Plain \TeX{}. It
-enables users to take advantage of basic \LaTeX/ functionality but keeps
+enables users to take advantage of \LaTeX/ functionality but keeps
 Plain \TeX/ simplicity. See
-\url{http://petr.olsak.net/opmac-e.html} for more information about it.
-For OPmac users: the red triangle {\Red$\blacktriangleleft$} in the right margin
-means that there is a difference from standard OPmac features.}
+\url{http://petr.olsak.net/opmac-e.html} for more information about it.}
 
-\notoc\nonum \sec Contents
-\maketoc
+\bigskip
+\noindent
+\OpTeX/ is \LuaTeX/ format with Plain \TeX/ and OPmac. Only \LuaTeX/ engine
+is supported. 
 
-\nonum \sec Introduction
-%%%%%%%%%%%%
+\OpTeX/ should be a modern Plain \TeX/ with power from OPmac (Fonts
+Selection System, colors, graphics, references, hyperlinks,
+indexing, bibliography, ...) with preferred Unicode fonts.
 
-\OpTeX/ is \LuaTeX/ format with Plain \TeX/ and OPmac. Only \LuaTeX/ engine
-is supported. The main goal of \OpTeX/ is:
+The main goal of \OpTeX/ is:
 
 \begitems
 * \OpTeX/ keeps the simplicity (like in Plain \TeX/ and OPmac macros).
 * There is no old obscurities concerning with various 8-bit encodings and
   various engines.
-* \OpTeX/ provides a powerful font selection system (for Unicode font
+* \OpTeX/ provides a powerful Fonts Selection System (for Unicode font
   families, of course).
 * \OpTeX/ supports hyphenations of all languages installed in your \TeX/ system.
-* All features from OPmac macros are copied.
-* Macros are documented in the same place where code is (macros for printing
-  such documentation will come in the future).
+* All features from OPmac macros are copied. For example sorting words in
+  the Index\fnotemark1, reading `.bib` files directly\fnotemark1, syntax 
+  highlighting\fnotemark1, colors, graphics, hyperlinks, references).
+  \fnotetext{All these features are implemented by \TeX/ macros, no external
+             program is needed.}
+* Macros are documented in the same place where code is.
 * User name space of control sequences is separated from internal name space
-  of \OpTeX/ and primitives (`\foo` versus `\_foo`).
+  of \OpTeX/ and primitives (`\foo` versus `\_foo`). The name spaces for
+  macro writers are designed too.
 \enditems
 
-\OpTeX/ should be a modern Plain \TeX/ with power from OPmac (fonts selection
-system, colors, external graphics, references, hyperlinks, indexing,
-bibliography, ...) with preferred Unicode fonts.
-
 If you need to customize your document or you need to use something
 very specific, then you can copy relevant parts of \OpTeX/ macros into your macro
 file and do changes of these macros here. This is significant difference from
@@ -70,1755 +67,45 @@ file and do changes of these macros here. This is significant difference from
 plenty of non-primitive parameters and syntax hiding \TeX/ internals.
 The macros from \OpTeX/ are simple and straightforward because they solve only
 what is explicitly needed, they does not create a new user level for
-controlling your document over \TeX/.
-And you can use \OpTeX/ macros, understand them an modify them.
+controlling your document. We have \TeX.
+You can use \OpTeX/ macros, understand them an modify them.
 
 \OpTeX/ offers a markup language for authors of texts (like \LaTeX),
 i.\,e.\ the fixed set of tags to define the structure of the document. This
 markup is different from the \LaTeX{} markup. It may offer to write the
 source text of the document somewhat clearer and more attractive. 
 
-\new 
-{\bf Disclaimer:} This software is under construction. It is possible
-that some features documented here will be changed in future. 
+The manual includes two parts: user documentation and technical
+documentation. The second part is generated directly from the sources of
+\OpTeX/. There are many hyperlinks from one part to second and vice versa.
 
-This manual desribes \OpTeX/ features only. We suppose that user knows \TeX/
-basic principles. They are described in many books. You can see a short
+This manual describes \OpTeX/ features only. We suppose that user knows \TeX/
+basics. They are described in many books. You can see a short
 document \ulink[http://petr.olsak.net/ftp/olsak/optex/tex-nutshell.pdf]
 {\TeX/ in nutshell} too.
 
+\vfil\break
 
-\sec Starting with \OpTeX/
-%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\new
-\OpTeX/ is compiled as a format for \LuaTeX/. Maybe there is a command
-`optex` in your \TeX/ distribution. Then you can write into command line
-
-\begtt
-optex document
-\endtt
-%
-You can try to process `optex op-demo` or `optex optex-doc`.
-
-If there is no `optex` command, see more information about installation
-\OpTeX/ at \url{http://petr.olsak.net/optex}. 
-
-A minimal document should be
-
-\begtt
-\fontfam[LMfonts]
-Hello World! \bye
-\endtt
-
-The first line `\fontfam[LMfonts]` tells that Unicode Latin Modern 
-fonts (derived from Computer Modern) are used. If you omit this line then
-preloaded Latin Modern fonts are used but preloaded fonts cannot be in
-Unicode\fnote
-{This is a technical limitation of \LuaTeX/ for fonts downloaded in formats:
-only 8bit fonts can be preloaded.}.
-So the sentence `Hello World` will be OK without the first line, but you 
-cannot print such sentence in another languages (for example `Ahoj světe!`) 
-where Unicode fonts are needed
-because of the characters like `ě` are not mapped correctly in preloaded
-fonts.
-
-A somewhat larger example with common settings should be:
-
-\begtt \catcode`!=0
-\fontfam[Termes]   % selecting Unicode font family Termes (section !ref[fontfam])
-\typosize[11/13]   % setting the basic font size and the baselineskip (sec. !ref[sizes])
-\margins/1 a4 (1,1,1,1)in   % setting 1in margins for A4 paper (section !ref[marg])
-\cslang            % Czech hyphenation patterns (section !ref[lang])
-
-Tady je text.
-\bye
-\endtt
-%
-You can look at `op-demo.tex` file for more examples.
-
-
-\sec Page layout
-%%%%%%%%%%%%%%%%
-
-\secc[marg] Setting the margins
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\OpTeX/ declares paper formats a4, a4l (landscape~a4), a5, a5l, b5, letter and
-user can declare another own format by `\sdef`:
-
-\begtt
-\sdef{_pgs:b5l}{(250,176)mm} 
-\sdef{_pgs:letterl}{(11,8.5)in}
-\endtt
-
-The `\margins` command declares margins of the document. This command have
-the following parameters:
-
-\begtt
-\margins/<pg> <fmt> (<left>,<right>,<top>,<bot>)<unit>
-  example:
-\margins/1 a4 (2.5,2.5,2,2)cm
-\endtt
-
-Parameters are:
-
-\begitems
-* <pg> \dots\ `1` or `2` specifies one-page or two-pages design.
-* <fmt> \dots\ paper format (a4, a4l, a5, letter, etc. or user defined).
-* <left>, <right>, <top>, <bot> \dots\ gives the amount of left, right,
-      top and bottom margins.
-* <unit> \dots\ unit used for values <left>, <right>, <top>, <bot>.
-\enditems
-
-Each of the parameters <left>, <right>, <top>, <bot> can be empty.
-If both <left> and <right> are nonempty then `\hsize` is set. Else `\hsize`
-is unchanged. If both <left> and <right> are empty then typesetting area is
-centered in the paper format. The analogical rule works when <top> or <bot>
-parameter is empty (`\vsize` instead `\hsize` is used). Examples:
-
-\begtt
-\margins/1 a4 (,,,)mm   % \hsize, \vsize untouched, 
-                        % typesetting area centered
-\margins/1 a4 (,2,,)cm  % right margin set to 2cm
-                        % \hsize, \vsize untouched, vertically centered
-\endtt
-
-If `<pg>=1` then all pages have the same margins. If `<pg>=2` then the
-declared margins are true for odd pages. The margins at the even pages are
-automaticaly mirrored in such case, it means that <left> is replaced by 
-<right> and vice versa.
-
-The `<fmt>` can be also in the form `(<width>,<height>)<unit>` where `<unit>` is
-optional. If it is missing then `<unit>` after margins specification is
-used. For example:
-
-\begtt
-\margins/1 (100,200) (7,7,7,7)mm
-\endtt
-%
-declares the paper 100$\times$200\,mm with all four margins 7\,mm. The spaces
-before and after <fmt> parameter are necessary.
-
-The command `\magscale[<factor>]` scales the whole typesetting area. 
-\new The fixed point of such scaling is the upper left corner of the paper sheet. 
-Typesetting (breakpoints etc.) is unchanged. All units are relative after
-such scaling. Only paper formats dimensions stays unscaled. Example:
-
-\begtt
-\margins/2 a5 (22,17,19,21)mm
-\magscale[1414] \margins/1 a4 (,,,)mm
-\endtt
-%
-The first line sets the `\hsize` and `\vsize` and margins for final
-printing at a5 format. The setting on the second line centers the scaled 
-typesetting area to the true a4 paper while breaking points for paragraphs
-and pages are unchanged. It may be usable for 
-review printing. After review is done, the second line can be commented out.
-
-\secc Concept of default page
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\OpTeX/ uses for page design very similar \"output routine" like Plain
-\TeX/. There is `\headline` followed by \"page body" followed by
-`\footline`. The `\headline` is empty by default and it can be used
-for running headers repeated on each page. The `\footline` prints
-centered page number by default. You can set the `\footline` to empty
-using `\nopagenumbers` macro.
-
-The margins declared by `\margins` macro (documented in the previous
-section~\ref[marg]) is concerned to the page body,
-i.e.\ the `\headline` and `\footline` are placed to the top and bottom
-margins.
-
-The distance between the `\headline` and the top of the page body is given by
-`\headlinedist` register. The distance between bottom of the page body and 
-the `\footline` is given by `\footlinedist`. The default values are:
-
-\begtt
-\headline = {}
-\footline = {\_hss\_rmfixed \_folio \_hss} % \folio expands to page number
-\headlinedist = 14pt % from baseline of \headline to top of page body 
-\footlinedist = 24pt % from last line in pagebody to baseline of footline
-\endtt
-
-The page body should be divided to top insertions (floating tables and
-figures) followed by a real text and followed by footnotes. 
-Typically, only real text is here. 
-
-The `\pgbackground` tokens list is empty by default but it can be used for
-creating background of each page (colors, picture, watermark for example).
-The macro `\draft` uses this register and puts big text DRAFT as watermark
-to each page. You can try it.
-
-More about the page layout is documented in files `parameters.opm` and 
-`output.opm`.
-
-\secc Footnotes and marginal notes
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-The Plain \TeX/'s macro `\footnote` can be used as usual. But a new macro 
-`\fnote{<text>}` is defined. The footnote mark is added automatically and it
-is numbered 
-\new
-on each chapter from one\fnote
-{You can declare `\fnotenumglobal` if you want footnotes numbered in whole
-document from one or `\fnotenumpages` if you want footnotes numbered at each
-page from one. Default setting is `\fnotenumchapters`}.
-The <text> is scaled to 80 \%. 
-User can redefine footnote mark or scaling, as shown in the file
-`fnotes.opm`.
-
-The `\fnote` macro is fully applicable only in \"normal outer" paragraph.
-It doesn't work inside boxes (tables for example). If you are solving such
-case you can use `\fnotemark<numeric-label>` inside the box: only the 
-footnote mark is generated here. When the box is finished you can use 
-`\fnotetext{<text>}`. This macro puts the <text> to the footnote. 
-The <numeric-label> have to be `1` if only one such command is in the box. 
-Second `\fnotemark` inside the same box have to have the parameter `2` etc. 
-The same number of `\fnotetext`s have to be written 
-after the box as the number of `\fnotemark`s inserted inside the box.
-Example:
-
-\begtt
-Text in a paragraph\fnote{First notice}...    % a "normal" footnote
-\table{...}{...\fnotemark1...\fnotemark2...}  % two footnotes in a box
-\fnotetext{Second notice}   
-\fnotetext{Third notice}
-...
-\table{...}{...\fnotemark1...}                % one footnote in a box
-\fnotetext{Fourth notice}
-\endtt
-
-The marginal note can be printed by the `\mnote{<text>}` macro. The <text>
-is placed to the right margin on the odd pages and it is placed to the left
-margin on the even pages. This is done after second \TeX{} run because the
-relevant information is stored in an external file and read from it again. 
-If you need to place the notes only to the fixed margin write 
-`\fixmnotes\right` or `\fixmnotes\left`.
-
-The <text> is formatted as a little paragraph with the maximal width
-`\mnotesize` ragged left on the left margins or ragged right on the right
-margins. The first line of this little paragraph has its vertical position
-given by the position of `\mnote` in the text. The exceptions are possible
-by setting the `\mnoteskip` register. You can implement such exceptions to
-each `\mnote` manually in final printing in order to margin notes do not
-overlap. The positive value of `\mnoteskip` shifts the note up and negative
-value shifts it down. For example `\mnoteskip=2\baselineskip \mnote{<text>}`
-shifts this (and only this) note two lines up.
-
-
-\sec Fonts
-%%%%%%%%%%
-
-\secc[fontfam] Font families
-%%%%%%%%%%%%%%%%%%%%%%%
-
-You can select the font family by `\fontfam[<Family-name>]`.
-The argument <Family-name> is case insensitive and spaces are ignored. So,
-`\fontfam[LM Fonts]` is equal to `\fontfam[LMfonts]` and it is equal
-to `\fontfam[lmfonts]`. Several aliases are prepared, thus 
-`\fontfam[Latin Modern]` can be used for loading Latin Modern family too.
-
-If you write `\fontfam[?]` then all font families registered in \OpTeX/ 
-are listed on the terminal and in the log file.
-If you write `\fontfam[catalog]` then a catalog of all fonts registered in
-\OpTeX/ and available in your \TeX/ system is printed. The instructions
-how to register your own font family is appended in such catalog.
-
-If the family is loaded then {\em font modifiers} applicable in such font family
-are listed on the terminal: (`\caps`, `\cond` for example).
-And there are four basic {\em variant selectors} (`\rm`, `\bf`, `\it`, `\bi`).
-The usage of variant selectors is the same as in Plain \TeX: 
-`{\it italics text}`, `{\bf bold text}` etc.
-
-The font modifiers (`\caps`, `\cond` for example) can
-be used before a basic variant selector and they
-can be (independently) combined: `\caps\it` or `\cond\caps\bf`. The
-modifiers keeps their internal setting until group ends or until another
-modifier which negates the previous feature is used. So
-`\caps \rm text \it text`  uses normal and italics in Caps and SmallCaps.
-
-\new
-There is one special variant selector `\currvar` which does not change the
-selected variant but reloads the font due to the (maybe newly
-specified) font modifier(s).
-
-The context between variants `\rm`--`\it` and `\bf`--`\bi` is kept by the `\em`
-macro (emphasize text).  
-It switches from current `\rm` to `\it`, from current `\it` to `\rm`, from
-current `\bf` to `\bi` and from current `\bi` to `\bf`.
-The italics correction `\/` is inserted automatically. Example:
-
-\begtt
-This is {\em important} text.     % = This is {\it important\/} text.
-\it This is {\em important} text. % = This is\/ {\rm important} text.
-\bf This is {\em important} text. % = This is {\bi important\/} text.
-\bi This is {\em important} text. % = This is\/ {\bf important} text.
-\endtt
-
-\new
-More about the \OpTeX/ font selection system is written the file
-`fonts-select.opm`. You can mix more font families in your document, you can
-declare your own variant selectors or modifiers etc.
-
-\secc[sizes] Font sizes
-%%%%%%%%%%%%%%%%%%%%%
-
-The command `\typosize[<fontsize>/<baselineskip>]` sets the font size of text and
-math fonts and baselineskip. If one of these two parameters is empty, the
-corresponding feature stays unchanged. Don't write the unit of these
-parameters. The unit is internally set to `\ptunit` which is 1pt by default.
-You can change the unit by the command `\ptunit=<something-else>`, 
-for instance `\ptunit=1mm` enlarges all font sizes declared by `\typosize`.
-Examples:
-
-\begtt
-\typosize[10/12]   % default of Plain TeX
-\typosize[11/12.5] % font 11pt, baseline 12.5pt
-\typosize[8/]      % font 8pt, baseline unchanged
-\endtt
-
-The commands for font size setting described in this section
-have local validity. If you put them into a group, 
-the settings are lost when the group is finished. If you set 
-something relevant with paragraph shape (baselineskip given by 
-`\typosize` for example) then you must first finalize the 
-paragraph and second to close the group: 
-`{\typosize[12/14] ...<text of paragraph>... \par}`. 
-
-The command
-`\typoscale[<font-factor>/<baselineskip-factor>]`
-sets the text and math fonts
-size and baselineskip as a multiple of the current fonts size and
-baselineskip. The factor is written in \"scaled"-like way, it means that 1000
-means factor one. The empty parameter is equal to the parameter 1000,
-i.e. the value stays unchanged. Examples:
-
-\begtt
-\typoscale[800/800]    % fonts and baselineskip re-size to 80 %
-\typoscale[\magstep2/] % fonts bigger 1,44times (\magstep2 expands to 1440)
-\endtt
-
-First usage of `\typosize` or `\typoscale` macro in your document sets so
-called {\em main values}, i.\,e.\ main font size and main baselineskip. They are internally 
-saved in registers `\mainfosize` and `\mainbaselineskip`. 
-
-\new
-The `\typoscale` command does scaling in respect to current values by default. 
-If you want to do it in respect to main values, type `\scalemain` immediately
-before `\typoscale` command.
-
-\begtt
-\typosize[12/14.4] % first usage in document, sets main values internally
-\typosize[15/18]   % bigger font
-\scalemain \typoscale[800/800] % reduces from main values, no from current.
-\endtt
-
-The size of the current font can be changed by the command
-`\thefontsize[<font-size>]` or can be rescaled by
-`\thefontscale[<factor>]`. These macros don't change math fonts sizes nor
-baselineskip.
-
-\new
-There is \"low level" `\setfontsize{<size-spec>}` command which behaves like
-a font modifier and sets given font size used by next variant selectors. 
-For example `\setfontsize{at15pt}\currvar` sets current variant to 15pt.
-
-If you are using a font family with \"optical sizes feature" (i.\,e.\ there
-are more recommended sizes of the same font which are not scaled
-linearly; good example is Computer Modern aka Latin Modern fonts) 
-then the recommended size is selected by all mentioned commands automatically. 
-
-More information about resizing of fonts is documented in `fonts-resize.opm`
-file. 
-
-\secc Typesetting math
-%%%%%%%%%%%%%%%%%%%%%
-
-\OpTeX/ preloads a collection of 7bit Computer Modern math fonts 
-and AMS fonts in its format. You can use them in any size and in the 
-`\boldmath` variant. 
-%
-\new 
-Most declared text font families (see `\fontfam` in the section~\ref[fontfam]) 
-are configured with recommended Unicode
-math font. This font is automaticlaly loaded unless you specify
-`\noloadmath` before first `\fontfam` command. See log file for more
-information about loading text font family and Unicode math fonts. If you
-prefer another Unicode math font, specify it by `\loadmath{[<font-file>]}`
-or `\loadmath{font-name}` before first `\loadfam` command.
-
-Hundreds math symbols and operators like in AMS\TeX/ are accessible. 
-For example  `\alpha` $\alpha$, `\geq`~$\geq$, `\sum` $\sum$, 
-`\sphericalangle` $\sphericalangle$, `\bumpeq`, $\bumpeq$. See AMS\TeX/
-manual for complete list of symbols.
-
-The following math alphabets are available:
-
-\begtt    \catcode`\$=3 \catcode`/=0 \medmuskip=0mu \adef{ }{ }
-\mit     % mathematical variables    $abc-xyz,ABC-XYZ$
-\it      % text italics              $/it abc-xyz,ABC-XYZ$
-\rm      % text roman                $/rm abc-xyz,ABC-XYZ$
-\cal     % normal calligraphics      $/cal ABC-XYZ$
-\script  % script                    $/script ABC-XYZ$
-\frak    % fracture                  $/frak abc-xyz,ABC-XYZ$
-\bbchar  % double stroked letters    $/bbchar ABC-XYZ$
-\bf      % sans serif bold           $/bf abc-xyz,ABC-XYZ$
-\bi      % sans serif bold slanted   $/bi abc-xyz,ABC-XYZ$
-\endtt
-
-The last two selectors `\bf` and `\bi` select the sans serif fonts in math regardless
-the current text font family. This is common notation for vectors and
-matrices. You can re-declare it, see the file `unimath-codes.opm` where math
-variants of `\bf` and `\bi` selectors are defined.
-
-The math fonts can be scaled by `\typosize` and `\typoscale` macros.
-Two math fonts collections are prepared: `\normalmath` for normal weight
-and `\boldmath` for bold. The first one is set by default.
-
-\new
-You can use `\mathbox{<text>}` inside math mode. It behaves as `{\hbox{<text>}}`
-(i.e. the <text> is printed in horizontal non-math mode)
-but the size of the <text> is adapted to the context of math size (text or script or
-scriptscript). 
-
-
-\sec Typical elements of document
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\secc[chap] Chapters and sections
-%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-The document can be divided into chapters, sections and subsections and titled
-by `\tit` command. The parameters are separated by the end of current line (no
-braces are used):
-
-\begtt
-\tit Document title <end of line>
-\chap Chapter title <end of line>
-\sec Section title <end of line>
-\secc Subsection title <end of line>
-\endtt
-
-If you want to write a title to more lines in your source file then you can
-use percent character before <end of line>. Such <end of line> is not
-scanned and reading of the title continues at next line.
-
-The chapters are automatically numbered by one number, sections by two numbers
-(chapter.section) and subsections by three numbers. If there are no chapters
-then section have only one number and subsection two.
-
-The implicit design of the titles of chapter etc.\ are implemented in the
-macros `\_printchap`, `\_printsec` and `\_printsecc`. A designer can simply change
-these macros if he/she needs another behavior.
-
-The first paragraph after the title of chapter, section and subsection is
-not indented but you can type `\let\_firstnoindent=\relax` if you need all
-paragraphs indented.
-
-If a title is so long then it breaks to more lines. It is better to hint the
-breakpoints because \TeX/ does not interpret the meaning of the title.
-User can put the `\nl` (it means newline) macro to the breakpoints.
-
-The chapter, section or subsection isn't numbered if the `\nonum` precedes.
-And the chapter, section or subsection isn't delivered to the table of
-contents if `\notoc` precedes.
-
-\secc[cap] Another numbered objects
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-Apart from chapters, sections and subsections, there are another
-automatically numbered objects: equations, captions for tables and
-figures. The user can declare more numbered object.
-
-If the user writes the `\eqmark` as the last element of the display mode then
-this equation is numbered. The equation number is printed in brackets. This number
-resets in each section by default.
-
-If the `\eqalignno` is used, then user can put `\eqmark` to the last column
-before `\cr`. For example:
-
-\begtt
-\eqalignno{
-    a^2+b^2 &= c^2 \cr
-          c &= \sqrt{a^2+b^2} & \eqmark \cr}
-\endtt
-
-The next automatically numbered objects are captions which is tagged by `\caption/t` for
-tables and `\caption/f` for figures. 
-The caption text follows.
-The `\cskip` can be used between `\caption` text and the real object (table
-or figure). You can use two orders: `<caption>\cskip <object>` or 
-`<object>\cskip <caption>`.
-The `\cskip` creates appropriate vertical space between them. Example:
-
-\begtt
-\caption/t The dependency of the computer-dependency on the age.
-\cskip
-\noindent\hfil\table{rl}{
-    age   & value \crl\noalign{\smallskip}
-    0--1  & unmeasured \cr 
-    1--6  & observable \cr
-    6--12 & significant \cr
-   12--20 & extremal \cr
-   20--40 & normal \cr
-   40--60 & various \cr
-   60--$\infty$ & moderate}
-\endtt
-
-This example produces:
-
-\medskip
-\caption/t The dependency of the computer-dependency on the age.
-\cskip
-\noindent\hfil\table{rl}{
-                age   & value \crl\noalign{\smallskip}
-                0--1  & unmeasured \cr 
-                1--6  & observable \cr
-                6--12 & significant \cr
-               12--20 & extremal \cr
-               20--40 & normal \cr
-               40--60 & various \cr
-               60--$\infty$ & moderate}
-\medskip
-
-You can see that the word \"Table" followed by a number is added by the macro 
-`\caption/t`. 
-The caption text is centered. If it occupies more lines then the 
-last line is centered.
-
-The macro `\caption/f` behaves like `\caption/t` but it is intended for
-figure captions with independent numbering.
-The word (Table, Figure) depends on the actual selected language (see
-section~\ref[lang] about languages). 
-
-If you wish to make the table or figure as floating object, you need to use
-Plain \TeX/ macros `\midinsert` or `\topinsert` terminated by `\endinsert`.
-Example:
-
-\begtt
-\topinsert  % table and its caption is printed at the top of the current page
-   <caption and table>
-\endinsert
-\endtt
-
-\new
-There are five prepared counters `A`, `B`, `C`, `D` and `E`.
-They are reset in each chapter and section\fnote
-{This feature can be changed, see the `sections.opm` in the technical documentation.}.
-They can be used in context of `\numberedpar <letter>{<text>}` 
-macro. For example:
-\begtt
-\def\theorem    {\numberedpar A{Theorem}}
-\def\corollary  {\numberedpar A{Corollary}}
-\def\definition {\numberedpar B{Definition}}
-\def\example    {\numberedpar C{Example}}
-\endtt
-%
-Three independent numbers are used in this example. One for Theorems and Corollaries
-second for Definitions and third for Examples. The user can write
-`\theorem Let $M$ be...` and the new paragraph is started with the text:
-{\bf Theorem 2.3.1.} Let $M$ be... 
-You can add an optional parameter in brackets. For example, 
-`\theorem [(L'Hôpital's rule)] Let $f$, $g$ be...` 
-is printed like {\bf Theorem 2.4.2 (L'Hôpital's rule).} Let $f$, $g$ be...
-
-
-\secc References
-%%%%%%%%%%%%%%%
-
-Each automatically numbered object documented in
-sections \ref[chap] and \ref[cap] can be referenced 
-\new
-if optional parameter
-`[<label>]` is appended to `\chap`, `\sec`,
-`\secc`, `\caption/t`, `\caption/f` or `\eqmark`. The alternative syntax is
-to use `\label[<label>]` before mentioned commands (not necessarily directly
-before). The reference is realized by `\ref[<label>]` or `\pgref[<label>]`.
-Example:
-
-\begtt
-\sec[beatle] About Beatles
-
-\noindent\hfil\table{rl}{...} % the table
-\cskip
-\caption/t [comp-depend] The dependency of the computer-dependency on the age.
-
-\label[pythagoras]
-$$ a^2 + b^2 = c^2 \eqmark $$
-
-Now we can point to the section~\ref[beatle] on the page~\pgref[beatle] 
-or write something about the equation~\ref[pythagoras]. Finally there 
-is an interesting Table~\ref[comp-depend].
-\endtt
-
-If there are forward referenced objects then user have to run \TeX{} twice.
-During each pass, the working `*.ref` file (with references data) is created
-and this file is used (if it exists) at the beginning of the document.
-
-You can use `\label[<label>]` before `\theorem`, `\definition` (macros defined by
-`\numberedpar`) if you want to reference these numbered objects. 
-You can't use `\theorem[<label>]` because the optional parameter 
-is reserved to another purpose.
-
-You can create a reference to whatever else by commands
-`\label[<label>]\wlabel{<text>}`. The connection between <label> and
-<text> is established. The `\ref[<label>]` will print <text>.
-
-By default, labels are not printed, of course. But if you are preparing a
-draft version of document, you can declare `\showlabels`. The labels 
-are printed at their destination places after such declaration.
-
-
-\secc Hyperlinks, outlines
-%%%%%%%%%%%%%%%%%%%%%%%%%
-
-If the command `\hyperlinks <color-in> <color-out>` is used at the beginning of
-the document, then the following objects are hyperlinked in the PDF output:
-
-\begitems
-* numbers generated by `\ref` or `\pgref`,
-* numbers of chapters, sections and subsections in the table of contents,
-* numbers or marks generated by `\cite` command (bibliography references),
-* texts printed by `\url` or `\ulink` commands.
-\enditems
-
-The last object is an external link and it is colored by
-`<color-out>`. Others links are internal and they are colored by
-`<color-in>`. Example:
-
-\begtt
-\hyperlinks \Blue \Green % internal links blue, URLs green.
-\endtt
-
-You can use another marking of active links: by frames which are visible in
-the PDF viewer but invisible when the document is printed. The way to do it
-is to define the macros `\pgborder`, `\tocborder`, `\citeborder`,
-`\refborder` and `\urlborder` as the triple of RGB components of the used
-color. Example:
-
-\begtt
-\def\tocborder {1 0 0}  % links in table of contents: red frame
-\def\pgborder {0 1 0}   % links to pages: green frame
-\def\citeborder {0 0 1} % links to references: blue frame
-\endtt
-
-By default these macros are not defined. It means that no frames are created.
-
-The hyperlinked footnotes can be activated by `\fnotelinks <color-fnt> <color-fnf>`
-where footnote marks in text have `<color-fnt>` and the same footnote marks
-in footnotes have <color-fnf>. You can define relevant borders
-`\fntborder` and `\fnfborder` analogically as `\pgboreder` (for example).
-
-There are \"low level" commands to create the links. You can specify the
-destination of the internal link by `\dest[<type>:<label>]`. The
-active text linked to the `\dest` can be created by
-`\ilink[<type>:<label>]{<text>}`. The `<type>` parameter is one of
-the `toc`, `pg`, `cite`, `ref` or another special for your purpose. 
-These commands create internal links only when `\hyperlinks` is decared.
-
-The `\url` macro prints its parameter in `\tt` font and creates a potential
-breakpoints in it (after slash or dot, for example). If `\hyperlinks`
-declaration is used then the parameter of `\url` is treated as an external URL link.
-An example: `\url{http://www.olsak.net}` creates \url{http://www.olsak.net}.
-The characters \code{\%}, `\`, `#`, `{` and `}` have to be protected by
-backslash in the `\url` argument, the other special characters `~`,
-`^`, `&` can be written as single character\fnote
-{More exactly, there are the same rules as for \code{\\code} command, see
-section~\ref[verbatim].}.
-You can insert the `\|` command 
-in the `\url` argument as a potential breakpoint.
-
-If the linked text have to be different than the URL, you can use
-`\ulink[<url>]{text}` macro. For example:
-`\ulink[http://petr.olsak.net/optex]{\OpTeX/ page}`
-creates
-\ulink[http://petr.olsak.net/optex]{\OpTeX/ page}.
-
-The PDF format provides {\em outlines} which are notes placed in the special frame of
-the PDF viewer. These notes can be managed as structured and hyperlinked
-table of contents of the document. The command `\outlines{<level>}` creates
-such outlines from data used for table of contents in the document. The
-<level> parameter gives the level of opened sub-outlines
-in the default view. The deeper levels can be open by mouse click on the
-triangle symbol after that.
-
-\new
-If you are using a special macro in section titles then `\outlines` macro
-may crash. You must declare variant of the macro for outlines case which is
-expandable. Use `\regmacro` in such case. See the section \ref[toc] for more information
-about `\regmacro`.
-
-The command `\insertoutline{<text>}` inserts next entry into PDF outlines at
-the main level~0. These entries can be placed before table of contents (created
-by `\outlines`) or after it. Theirs hyperlink destination is in the place
-where  `\insertoutline` macro is used.
-
-\secc Lists 
-%%%%%%%%%%
-
-The list of items is surrounded by `\begitems` and `\enditems` commands.
-The asterisk (`*`) is active within this environment and it starts one item.
-The item style can be chosen by `\style` parameter written after `\begitems`:
-
-\begtt
-\style o % small bullet
-\style O % big bullet (default)
-\style - % hyphen char
-\style n % numbered items 1., 2., 3., ...
-\style N % numbered items 1), 2), 3), ...
-\style i % numbered items (i), (ii), (iii), ...
-\style I % numbered items I, II, III, IV, ...
-\style a % items of type a), b), c), ...
-\style A % items of type A), B), C), ...
-\style x % small rectangle
-\style X % big rectangle
-\endtt
-
-For example:
-
-\begtt
-\begitems
-* First idea
-* Second idea in subitems:
-  \begitems \style i
-  * First sub-idea
-  * Second sub-idea
-  * Last sub-idea
-  \enditems
-* Finito
-\enditems
-\endtt
-%
-produces:
-
-\begitems
-* First idea
-* Second idea in subitems:
-  \begitems \style i
-   * First sub-idea
-   * Second sub-idea
-   * Last sub-idea
-  \enditems
-* Finito
-\enditems
-
-Another style can be defined by the command `\sdef{_item:<style>}{<text>}`.
-Default item can be set by `\defaultitem={<text>}`.
-The list environments can be nested. Each new level of item is indented by
-next multiple of `\iindent` which is set to `\parindent` by default.
-The `\ilevel` register says what level of items is currently processed.
-Each `\begitems` starts `\everylist` tokens register. You can set, for
-example:
-\begtt
-\everylist={\ifcase\ilevel\or \style X \or \style x \else \style - \fi}
-\endtt
-
-You can say `\begitems \novspaces` if you don't want vertical spaces above
-and below the list.
-More information about design of lists of items should be found in the `lists.opm` file.
-
-\secc Tables
-%%%%%%%%%%%
-
-The macro `\table{<declaration>}{<data>}` provides similar <declaration>
-of tables as in \LaTeX: you can use letters `l`, `r`, `c`, each letter declares 
-one column (aligned to left, right, center respectively). 
-These letters can be combined by the `|` character (vertical line). Example
-
-\begtt
-\table{||lc|r||}{                  \crl
-   Month    & commodity  & price   \crli \tskip2pt
-   January  & notebook   & \$ 700  \cr
-   February & skateboard & \$ 100  \cr
-   July     & yacht      & k\$ 170 \crl}
-\endtt
-%
-generates the following result:
-
-\bigskip
-\noindent\hfil\table{||lc|r||}{    \crl
-   Month    & commodity  & price   \crli \tskip2pt
-   January  & notebook   &  \$ 700 \cr
-   February & skateboard &  \$ 100 \cr
-   July     & yacht      & k\$ 170 \crl}
-\bigskip
-
-Apart from `l`, `r`, `c` declarators, you can use the `p{<size>}` declarator
-which declares the column of given width. More precisely, a long text in
-the table cell is printed as an paragraph with given width.
-To avoid problems with narrow left-right aligned paragraphs you can write
-`p{<size>\raggedright}`, then the paragraph will be only left aligned.
-
-You can use `(<text>)` in the <declaration>. Then this text is applied in
-each line of the table. For example `r(\kern10pt)l` adds more 10\,pt space
-between `r` and `l` rows. 
-
-An arbitrary part of the <declaration> can be repeated by a <number>
-prefixed. For example `3c` means `ccc` or `c 3{|c}` means
-`c|c|c|c`. Note that spaces in the <declaration> are ignored and you 
-can use them in order to more legibility.
- 
-The command `\cr` used in the <data> part of the table 
-is generally known. It marks end row of the table. 
-Moreover \OpTeX/ defines following similar commands:
-
-\begitems
-* `\crl` \dots\ the end of the row with a horizontal line after it.
-* `\crli` \dots\ like `\crl` but the horizontal line doesn't intersect the
-      vertical double lines.
-* `\crlli` \dots\ like `\crli` but horizontal line is doubled.
-* `\crlp{<list>}` \dots\ like `\crli` but the lines are drawn only in the
-  columns mentioned in comma separated `<list>` of their numbers.
-  The <list> can include `<from>-<to>` declarators, for example
-  `\crlp{1-3,5}` is equal to `\crlp{1,2,3,5}`. 
-\enditems
-
-The `\tskip<dimen>` command works like the `\noalign{\vskip<dimen>}` 
-after `\cr*` commands but it doesn't interrupt the vertical lines.
-
-\new
-You can use following parameters for the `\table` macro. Default values are listed
-too. 
-
-\begtt
-\everytable={}       % code used after settings in \vbox before table processing
-\thistable={}        % code used when \vbox starts, is is removed after using it
-\tabiteml={\enspace} % left material in each column
-\tabitemr={\enspace} % right material in each column
-\tabstrut={\strut}   % strut which declares lines distance in the table
-\tablinespace=2pt    % additional vertical space before/after horizontal lines
-\vvkern=1pt          % space between lines in double vertical line
-\hhkern=1pt          % space between lines in double horizontal line
-\endtt
-
-Example: if you do `\tabiteml={$\enspace}\tabitemr={\enspace$}` then
-the `\table` acts like \LaTeX's array environment.
-
-If there is an item which spans to more than one column in the table then
-`\multispan{<number>}` macro from Plain \TeX{} can help you or, you can use
-`\mspan<number>[<declaration>]{<text>}`
-which spans <number> columns and formats the <text> by the
-<declaration>. The <declaration> must include a declaration of only one column
-with the same syntax as common `\table` <declaration>.
-If your table includes vertical rules and you want to
-create continuous vertical rules by `\mspan`, then use rule declarators `|`
-only after `c`, `l` or `r` letter in `\mspan` <declaration>. The
-exception is only in the case when `\mspan` includes first
-column and the table have rules on the left side. The example of `\mspan` usage is below.
-
-The `\frame{<text>}` makes a frame around <text>. You can put the whole `\table`
-into `\frame` if you need double-ruled border of the table. Example:
-
-\begtt
-\frame{\table{|c||l||r|}{ \crl
-  \mspan3[|c|]{\bf Title} \crl   \noalign{\kern\hhkern}\crli
-  first & second & third  \crlli
-  seven & eight  & nine   \crli}}
-\endtt
-%
-creates the following result:
-
-\hfil\frame{\table{|c||l||r|}{\crl
-  \mspan3[|c|]{\bf Title} \crl   \noalign{\kern\hhkern}\crli
-  first & second & third  \crlli
-  seven & eight  & nine   \crli}}
-\bigskip
-
-The `c`, `l`, `r` and `p` are default \"declaration letters" but you can define
-more such letters by `\def\_tabdeclare<letter>{<left>##<right>}`. More about
-it is in technical documentation in the file `table.opm`.
-
-The rule width of tables and implicit width of all `\vrule`s and `\hrule`s
-can be set by the command `\rulewidth=<dimen>`. The default value given 
-by \TeX/ is 0.4\,pt.
-
-Many tips about tables can be seen on
-\url{http://petr.olsak.net/opmac-tricks-e.html}.
-
-\label[verbatim]\secc Verbatim
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-The display verbatim text have to be surrounded by the `\begtt` and
-`\endtt` couple. 
-The in-line verbatim have to be tagged (before and after) 
-by a character which is declared by
-`\activettchar<char>`. For example \code{\\activettchar`} 
-declares the character \code{`} 
-for in-line verbatim markup. 
-And you can use \code{`\\relax`} for
-verbatim `\relax` (for example).
-\new
-Another alternative of printing in-line
-verbatim text is `\code{<text>}` (see below). 
-
-If the numerical register `\ttline` is set to the non-negative value then
-display verbatim will number the lines. The first line has the number
-`\ttline+1` and when the verbatim ends then the `\ttline` value is equal to the
-number of last line printed. Next `\begtt...\endtt` environment will follow
-the line numbering. \OpTeX/ sets `\ttline=-1` by default.
-
-The indentation of each line in display verbatim is controlled by
-`\ttindent` register. This register is set to the `\parindent` by default.
-User can change values of the `\parindent` and `\ttindent` independently.
-
-The `\begtt` command starts internal group in which the catcodes are changed. 
-\new
-Then the `\everytt` tokens register is run. It is empty by default and user can
-control fine behavior by it. For example the catcodes can be reseted here. If
-you need to define active character in the `\everytt`, use `\adef` as in the
-following example:
-
-\begtt   \adef@{\string\endtt}
-\everytt={\adef!{?}\adef?{!}}
-\begtt
-Each occurrence of the exclamation mark will be changed to 
-the question mark and vice versa. Really? You can try it! 
-@
-\endtt
-%
-The `\adef` command sets its parameter as active {\it after\/}
-the value of `\everytt` is read. So you don't have to worry about active
-categories. 
-
-There is an alternative to `\everytt` named `\everyintt` which is used for
-in-line verbatim surrounded by an `\activettchar` or processed by the `\code`
-command.
-
-The `\everytt` is applied to all `\begtt...\endtt` environments (if it is not
-decared in a group). There are tips for such global `\everytt` definitions here:
-
-\begtt
-\everytt={\typosize[9/11]}      % setting font size for verbatim
-\everytt={\ttline=0}            % each listing will be numbered from one
-\everytt={\adef{ }{\char9251 }} % visualization of spaces (Unicode fonts)
-\endtt
-
-\new
-If you want to apply a special code only for one `\begtt...\endtt`
-environment then don't set any `\everytt` but put desired material at the 
-same line where `\begtt` is. For example:
-
-\begtt   \adef@{\string\endtt}
-\begtt   \adef!{?}\adef?{!}
-Each occurrence of ? will be changed to ! and vice versa. 
-@
-\endtt
-
-The in-line verbatim surrounded by an `\activettchar` doesn't work in
-parameter of macros and macro definitions, especially in titles declared by
-`\chap`, `\sec` etc. 
-\new
-You can use more robust command `\code{<text>}` in such
-situations, but you must escape following characters in the <text>:
-`\`, `#`, `%`, braces (if the braces are unmatched in the <text>), 
-and space or `^` (if there are more than one subsequent spaces or `^` in 
-the <text>). Examples:
-
-\begtt
-\code{\\text, \%\#} ... prints \text, %#
-\code{@{..}*&^$ $}  ... prints @{..}*&^$ $ without escaping, but you can
-                        escape these characters too, if you want.
-\code{a \ b}        ... two spaces between a  b, the second one must be escaped
-\code{xy\{z}        ... xy{z ... unbalanced brace must be escaped
-\code{^\^M}         ... prints ^^M, the second ^ must be escaped
-\endtt
-
-You can print verbatim listing from external files by `\verbinput` command. 
-Examples:
-
-\begtt
-\verbinput (12-42) program.c  % listing from program.c, only lines 12-42
-\verbinput (-60) program.c    % print from begin to the line 60
-\verbinput (61-) program.c    % from line 61 to the end
-\verbinput (-) program.c      % whole file is printed
-\verbinput (70+10) program.c  % from line 70, only 10 lines printed
-\verbinput (+10) program.c    % from the last line read, print 10 lines 
-\verbinput (-5+7) program.c   % from the last line read, skip 5, print 7
-\verbinput (+) program.c      % from the last line read to the end
-\endtt
-
-
-The `\ttline` influences the line numbering by the same way as in
-`\begtt...\endtt` environment. If `\ttline=-1` then real line numbers are
-printed (this is default). If \code{\\ttline<-1} then no line 
-numbers are printed.
-
-The `\verbinput` can be controlled by `\everytt`, `\ttindent` just like
-in `\begtt...\endtt`.
-
-
-\sec Autogenerated lists
-%%%%%%%%%%%%%%%%%%%%%%%%
-
-\secc[toc] Table of contents
-%%%%%%%%%%%%%%%%%%%%%%
-
-The `\maketoc` command prints the table of contents of all `\chap`, `\sec`
-and `\secc` used in the document. These data are read from external `*.ref` file, so
-you have to run \TeX/ more than once (typically three times if the table of
-contents is at the beginning of the document). 
-
-The name of the section with table of contents is not printed. The direct usage
-of `\chap` or `\sec` isn't recommended here because the table of contents 
-is typically not referenced to itself. You can print the unnumbered and unreferenced
-title of the section by the code:
-
-\begtt
-\nonum\notoc\sec Table of Contents
-\endtt
-
-\new
-If you are using a special macro in section titles or chapter titles 
-and you need different behavior of such macro in other cases then use 
-`\regmacro{<case-toc>}{<case-mark>}{<case-outline>}`.
-The parameters are applied locally in given cases. The `\regmacro` can be
-used repeatedly: the parameters are accumulated (for more macros). 
-If a parameter is empty then original definition is used in given case.
-For example:
-
-\begtt
-% default value of \mylogo macro used in text and in the titles:
-\def\mylogo{\leavevmode\hbox{\Red{\it My}\Black{\setfontsize{mag1.5}\rm Lo}Go}}
-% another variants:
-\regmacro {\def\mylogo{\hbox{\Red My\Black LoGo}}} % used in TOC
-          {\def\mylogo{\hbox{{\it My}\/LoGo}}}     % used in running heads
-          {\def\mylogo{MyLoGo}}                    % used in outlines
-\endtt
-
-\secc Making the index 
-%%%%%%%%%%%%%%%%%%%%%
-
-The index can be included into document by `\makeindex` macro. No external
-program is needed, the alphabetical sorting are done inside \TeX/ at macro
-level.
-
-The `\ii` command (insert to index) declares the word separated by the space
-as the index item. This declaration is represented as invisible atom on the
-page connected to the next visible word. The page number of the page where
-this atom occurs is listed in the index entry. So you can type:
-
-\begtt
-The \ii resistor resistor is a passive electrical component ...
-\endtt
-
-You cannot double the word if you use the `\iid` instead `\ii`:
-
-\begtt
-The \iid resistor is a passive electrical component ...
-or:
-Now we'll deal with the \iid resistor .
-\endtt
-
-Note that the dot or comma have to be separated by space when `\iid` is
-used. This space (before dot or comma) is removed by the macro in 
-the current text.
-
-The multiple-words entries are commonly organized in the index by the format
-(for example): 
-
-\medskip
-
-linear~dependency  11, 40--50
-
---- independency 12, 42--53
-
---- space 57, 76
-
---- subspace 58
-
-\medskip
-
-To do this you have to declare the parts of the index entries by the `/` separator.
-Example:
-
-\begtt
-{\bf Definition.}
-\ii linear/space,vector/space
-{\em Linear space} (or {\em vector space}) is a nonempty set of...
-\endtt
-
-The number of the parts of one index entry is unlimited. Note, that you can
-spare your typing by the comma in the `\ii` parameter. The previous example
-is equivalent to `\ii linear/space` `\ii vector/space`.
-
-Maybe you need to propagate to the index the similar entry to the
-linear/space in the form space/linear. You can do this by the shorthand `,@`
-at the end of the `\ii` parameter. Example:
-
-\begtt
-\ii linear/space,vector/space,@
-is equivalent to:
-\ii linear/space,vector/space \ii space/linear,space/vector
-\endtt
-
-If you really need to insert the space into the index entry, write `~`.
-
-If the `\ii` or `\iid` command is preceded by `\iitype <letter>`, then such
-reference (or more references generated by one `\ii`) has specified type.
-The page numbers of such references should be formatted
-specially in the index. \OpTeX/ implements only `\iitype b`, `\iitype i` and
-`\iitype u`. The page number in bold or in italics or underlined is printed
-in the index when these types are used. Default index type is empty, which
-prints page numbers in normal font. See \TeX/book index as an example.
-
-The `\makeindex` creates the list of alphabetically sorted index entries
-without the title of the section and without creating more columns. \OpTeX/
-provides another macros for more columns: 
-
-\begtt
-\begmulti <number of columns>
-<text>
-\endmulti
-\endtt
-The columns will be balanced. The Index can be printed by the following
-code:
-
-\begtt
-\sec Index
-\begmulti 3 \makeindex \endmulti
-\endtt
-
-Only \"pure words" can be propagated to the index by the `\ii` command. It
-means that there cannot be any macro, \TeX/ primitive, math selector etc.
-But there is another possibility to create such complex index entry. Use
-\"pure equivalent" in the `\ii` parameter and map this equivalent to the
-real word which is printed in the index by `\iis` command. Example:
-
-\begtt
-The \ii chiquadrat $\chi$-quadrat method is 
-...
-If the \ii relax `\relax` command is used then \TeX/ is relaxing.
-...
-\iis chiquadrat {$\chi$-quadrat}
-\iis relax {\code{\\relax}}
-\endtt
-%
-The `\iis <equivalent> {<text>}` creates one entry in the \"dictionary 
-of the exceptions". The sorting is done by the <equivalent> but the
-<text> is printed in the index entry list.
-
-The sorting rules when `\makeindex` runs depends on the current language. 
-See section~\ref[lang] about languages selection.
-
-\secc Bib\TeX/ing
-%%%%%%%%%%%%%%%%
-
-The command `\cite[<label>]` (or its variants of the type
-\hbox{`\cite[<label-1>,<label-2>,...,<label-n>]`})
-creates the citation in the form [42] (or [15,~19,~26]). 
-If `\shortcitations` is declared at the beginning of the document then 
-continuous sequences of numbers are re-printed like this: 
-\hbox{[3--5,~7,~9--11]}. If
-`\sortcitations` is declared then numbers generated by one `\cite` command
-are sorted upward.
-
-If `\nonumcitations` is declared then the marks instead numbers are generated
-depending on the used bib-style. For example the citations look like
-[Now08] or [Nowak, 2008].
-
-The `\rcite[<labels>]` creates the same list as `\cite[<labels>]` but without
-the outer brackets. Example: `[\rcite[tbn], pg.~13]` creates [4,~pg.13].
-
-The `\ecite[<label>]{<text>}` prints the `<text>` only, but the entry labeled
-<label> is decided as to be cited. If `\hyperlinks` is used then <text>
-is linked to the references list.
-
-You can define alternative formating of `\cite` command. Example:
-
-\begtt
-\def\cite[#1]{(\rcite[#1])}    % \cite[<label>] creates (27)
-\def\cite[#1]{$^{\rcite[#1]}$} % \cite[<label>] creates^{27}
-\endtt
-
-The numbers printed by `\cite` correspond to the same numbers generated in
-the list of references. 
-There are two possibilities to generate this
-references list:
-
-\begitems
-* Manually using `\bib[<label>]` commands.
-* By `\usebib/<type> (<style>) <bib-base>` command which reads `*.bib`
-  files directly. 
-\enditems
-
-\new
-Note that another two possibilities documented in OPmac (using external
-Bib\TeX/ program) isn't supported because Bib\TeX/ is old program which does not
-support Unicode. And Biber seems to be not compliant with Plain \TeX.
-
-\medskip\noindent
-{\bf References created manually using `\bib[<label>]` command.}
-
-\begtt  
-\bib [tbn] P. Olšák. {\it\TeX{}book naruby.} 468~s. Brno: Konvoj, 1997.
-\bib [tst] P. Olšák. {\it Typografický systém \TeX.}  
-           269~s. Praha: CSTUG, 1995.
-\endtt
-
-If you are using `\nonumcitations` then you need to declare the <marks>
-used by `\cite` command. To do it you must use long form of the `\bib`
-command in the format `\bib[<label>] = {<mark>}`. The spaces around
-equal sign are mandatory. Example:
-
-\begtt
-\bib [tbn] = {Olšák, 2001} 
-    P. Olšák. {\it\TeX{}book naruby.} 468~s. Brno: Konvoj, 2001.
-\endtt
-
-\noindent
-{\bf Direct reading of `.bib` files} is possible by `\usebib` macro.
-This macro reads and uses macro package `librarian.tex` by Paul Isambert. 
-The usage is:
-
-\begtt
-\usebib/c (<style>) <bib-base> % sorted by \cite-order (c=cite),
-\usebib/s (<style>) <bib-base> % sorted by style (s=style).
-% example:
-\usebib/s (simple) op-example
-\endtt
-
-The <bib-base> is one or more `*.bib` database source files (separated by
-spaces and without extension) and the <style> is the part of the filename
-`bib-<style>.opm` where the formatting of the references list is
-defined. \OpTeX/ supports `simple` or `iso690` styles. The behavior of
-`\usebib` is documented in `usebib.opm` and `bib-iso690.opm` files in detail.
-
-Not all records are printed from <bib-base> files: the command `\usebib`
-selects only such bib-records which were used in `\cite` or `\nocite`
-commands in your document. The `\nocite` behaves as `\cite` but prints
-nothing. It only tels that mentioned bib-record should be printed in the
-reference list. If `\notcite[*]` is used then all records from <bib-base>
-are printed.
-
-
-\sec Graphics
-%%%%%%%%%%%%%
-
-\secc Colors
-%%%%%%%%%%%
-
-\OpTeX/ provides a small number of color selectors: 
-{\Blue `\Blue`}, 
-{\Red `\Red`}, 
-{\Brown `\Brown`},
-{\Green `\Green`}, 
-{\Yellow `\Yellow`}, 
-{\Cyan `\Cyan`}, 
-{\Magenta `\Magenta`}, 
-{`\White`}, 
-{\Grey `\Grey`}, 
-{\LightGrey `\LightGrey`} and
-`\Black`. User can define more
-such selectors by setting four CMYK components 
-\new
-or three RGB components. For example
-
-\begtt
-\def \Orange {\setcmykcolor{0 0.5 1 0}}
-\def \Purple {\setrgbcolor{1 0 1}}
-\endtt
-
-\new
-The command `\morecolors` reads more definitions of color selectors 
-from \LaTeX/ file `x11nam.def`. There is about 300 color names like 
-`\DeepPink`, `\Chocolate` etc. If there are numbered variants of the same
-name, then you can append letters B, C, etc. to the name in \OpTeX/. For example 
-`\Chocolate` is Chocolate1, `\ChocolateB` is Chocolate2 etc.
-
-\new
-The color selectors work locally in groups by default but with limitations. See 
-the file `colors.opm` for more information.
-
-The colors `\Blue`, `\Cyan` etc. are defined with CMYK components using `\setcmykcolor`.
-But you can define a color with three RGB components too and `\morecolors`
-defines such RGB colors. By default, the color model isn't converted but only stored to
-PDF output for each used color by default. Thus, there may be a mix of color
-models in the PDF output which is not good idea. You can overcome this
-problem by declaration `\onlyrgb` or `\onlycmyk`. Then only selected color
-model is used for PDF output and if an used color is declared by another color
-model then it is converted.
-The `\onlyrgb` creates colors more bright (usable for computer
-presentations). On the other hand CMYK makes colors more true\fnote
-{Printed output is more equal to the monitor preview especialy if you are
-using ICC profile for your printer.} 
-for printing.
-
-\new
-You can define your color by a linear combination of previously defined colors using
-`\colordef`. For example:
-
-\begtt
-\colordef \myCyan {.3\Green + .5\Blue}  % 30 % green, 50 % blue, rest is white 
-\colordef \DarkBlue {\Blue + .4\Black}  % Blue mixed with 40 % of black 
-\colordef \myGreen{\Cyan+\Yellow}       % exact the same as \Green
-\colordef \MyColor {.3\Orange+.5\Green+.2\Yellow}
-\endtt
-%
-The linear combination is done in CMYK substractive color space by default 
-(RGB colors used in `\colordef` argument are converted first). 
-If the resulting component is greater than 1 then it is truncated to 1.
-If a convex linear combination (as in the last example above) is used then it
-emulates color behavior on a painter's palette.
-You can use `\rgbcolordef` instead `\colordef` if you want to mix colors 
-in additive RGB color space.
-
-More about colors, about CMYK versus RGB and
-about the `\colordef` command is written in the `colors.opm` file.
-
-\def\coloron#1#2#3{%
-   \setbox0=\hbox{#3}\leavevmode
-   {\localcolor\rlap{#1\strut \vrule width\wd0}#2\box0}%
-}
-The following example defines a macro which creates the
-\coloron\Yellow\Brown{colored text on the colored background}. Usage:
-`\coloron<background><foreground>{<text>}`
-
-The `\coloron` can be defined as follows:
-
-\begtt
-\def\coloron#1#2#3{%
-   \setbox0=\hbox{#3}\leavevmode
-   {\rlap{#1\strut \vrule width\wd0}#2\box0}%
-}
-\coloron\Yellow\Brown{The brown text on the yellow backround}
-\endtt
-
-\secc Images
-%%%%%%%%%%%
-
-The `\inspic {<filename>.<extension>}` or
-`\inspic <filename>.<extension><space>`
-inserts the picture stored in
-the graphics file with the name `<filename>.<extension>` to the document. 
-You can set the picture width by `\picw=<dimen>`
-before `\inspic` command which declares the width of the picture 
-The image files can be in the PNG, JPG, JBIG2 or PDF format. 
-
-The `\picwidth` is an equivalent register to `\picw`. Moreover there is an
-`\picheight` register which denotes the height of the picture. If both
-registers are set then the picture will be (probably) deformed. 
-
-The image files are searched in `\picdir`. This token list is empty 
-by default, this means that the image files are searched in the 
-current directory. Example: `\picdir={img/}` supposes that image files are
-in `img` subdirectory. Note: the directory name must end by `/` in `\picdir`
-declaration.
-
-Inkscape\fnote
-{A powerfull and free wysiwyg editor for creating vector graphics.} 
-is able to save a picture to PDF and labels of the picture to another
-file\fnote
-{Chose \"Omit text in PDF and create LaTeX file" option.}. 
-This second file should be read by \TeX/ in order to print labels
-in the same font as document font. \OpTeX/ supports this feature by
-`\inkinspic {<filename>.pdf}` command. It reads and displays both: PDF image
-and labes generated by Inkscape.
-
-If you want to create a vector graphics (diagrams, schema, geometry
-skicing) then you can do it in Wysiwyg graphics editor (Inkscape, Geogebra for
-example), export the result to PDF and include it by `\inspic`.
-If you want to \"programm" such pictures then Tikz package is recommended.
-It works in Plain \TeX. 
-
-\secc PDF transformations
-%%%%%%%%%%%%%%%%%%%%%%%%
-
-All typesetting elements are transformed by linear
-transformation given by the current transformation matrix. The
-`\pdfsetmatrix {<a> <b> <c> <d>}` command makes the internal multiplication
-with the current matrix so linear transformations can be composed. 
-One linear transformation given by the `\pdfsetmatrix` above transforms
-the vector $[0,1]$ to $[<a>,<b>]$ and $[1,0]$ to $[<c>,<d>]$.
-The stack-oriented commands `\pdfsave` and `\pdfrestore` gives a possibility of
-storing and restoring the current transformation matrix and the current point.
-The position of the current point have to be the same from \TeX{}'s point of
-view as from transformation point of view when `\pdfrestore` is processed.
-Due to this fact the `\pdfsave\rlap{<transformed text>}\pdfrestore` 
-or something similar is recommended.
-
-\OpTeX/ provides two special transformation macros:
-
-\begtt
-\pdfscale{<horizontal-factor>}{<vertical-factor>} 
-\pdfrotate{<angle-in-degrees>}
-\endtt 
-
-These macros simply calls the properly `\pdfsetmatrix` command.
-
-It is known that the composition of transformations is not commutative. It
-means that the order is important. You have to read the transformation
-matrices from right to left. Example:
-
-\begtt
-First: \pdfsave \pdfrotate{30}\pdfscale{-2}{2}\rlap{text1}\pdfrestore
-      % text1 is scaled two times and it is reflected about vertical axis
-      % and next it is rotated by 30 degrees left.
-second: \pdfsave \pdfscale{-2}{2}\pdfrotate{30}\rlap{text2}\pdfrestore
-      % text2 is rotated by 30 degrees left then it is scaled two times
-      % and reflected about vertical axis.
-third: \pdfsave \pdfrotate{-15.3}\pdfsetmatrix{2 0 1.5 2}\rlap{text3}%
-       \pdfrestore % first slanted, then rotated by 15.3 degrees right
-\endtt
-%
-\par\nobreak\bigskip\smallskip
-This gives the following result. 
-First: \pdfsave \pdfrotate{30}\pdfscale{-2}{2}\rlap{text1}\pdfrestore
-second: \pdfsave \pdfscale{-2}{2}\pdfrotate{30}\rlap{text2}\pdfrestore
-third: \pdfsave \pdfrotate{-15.3}\pdfsetmatrix{2 0 1.5 2}\rlap{text3}\pdfrestore
-\par\nobreak\bigskip\penalty0%\bigskip
-
-You can see that \TeX/ knows nothing about dimensions of transfomed material,
-it treats it as with a zero dimension object. 
-\new
-This problem is solved by the `\transformbox{<transformation>}{<text>}` 
-macro which puts the transformed
-material to a box with relevant dimension. The <transfromation> parameter
-includes one or more transfromation commands `\pdfsetmatrix`, `\pdfscale`,
-`\pdfrotate` with their parameters. The <text> is transformed text.
-
-Example: `\frame{\transformbox{\pdfscale{1}{1.5}\pdfrotate{-10}}{moj}}`
-creates \frame{\transformbox{\pdfscale{1}{1.5}\pdfrotate{-10}}{moj}}.
-
-The `\rotbox{<deg>}{<text>}` is a shortcut for 
-`\transformbox{\pdfrotate{<deg>}}{<text>}`.
-
-\secc Ovals, circles
-%%%%%%%%%%%%%%%%%%%%
-
-\new
-The `\inoval{<text>}` creates a box like this: \inoval{text}. 
-Multiline text can be put in an oval by the command `\inoval{\vbox{<text>}}`.
-Local settings can be set by
-`\inoval[<settings>]{<text>}` or you can re-declare global settings by
-`\ovalparams={<settings>}`. The default settings are:
-
-\begtt
-\ovalparams={\roudness=2pt            % diameter of circles in the corners
-             \fcolor=\Yellow          % color used for filling oval
-             \lcolor=\Red             % line color used in the border
-             \lwidth=0.5bp            % line width in the border
-             \shadow=N                % use a shadow effect
-             \overlapmargins=N        % ignore margins by surrounding text
-             \hhkern=0pt \vvkern=0pt} % left-righ margin, top-bottom margin
-\endtt
-The total distance from text to oval boundary is `\hhkern+\roudness` at the left and right 
-sides and
-`\vvkern+\roundness` at the top and bottom sides of the text.
-
-If you need a setting for the `<text>` (color, size, font etc.), use
-`\oval{<text settings><text>}`.
-
-\new
-The `\incircle[\ratio=1.8]{<text>}` creates a box like this \incircle[\ratio=1.8]{text}.
-The `\ratio` is width/height. The usage is analogical like for oval. 
-The default settings of parameters are
-
-\begtt
-\circleparams={\ratio=1 \fcolor=\Yellow \lcolor=\Red \lwidth=0.5bp 
-               \shadow=N \ignoremargins=N \hhkern=2pt \vvkern=2pt}
-\endtt
-
-\new
-The macros `\clipinoval <x> <y> <width> <height> {<text>}`
-and `\clipincircle` (with the same parameters)
-print the `<text>` when a clipping path (oval or cirle) with given
-`<with>` and `<height>` shifted its center by `<x>` to right and by `<y>` to up
-is used. 
-The `\roundness=5mm` is default for `\clipingoval` and user can change it.
-Example:
-
-\begtt 
-\clipingcircle 3cm 3.5cm 6cm 7cm {\picw=6cm \inspic{myphoto.jpg}} 
-\endtt
-
-\secc Putting images and texts wherever
-
-\new
-The `\puttext <x> <y> {<text>}` puts the `<text>` shifted by `<x>` right and by
-`<y>` up from current point of typesetting and does'n not change the
-position of the current point. Assume coordinate system with origin in the
-current point. Then `\puttext <x> <y> {<text>}` puts the text at the
-coordinates `<x>`, `<y>`. More exactly the left edge of its baseline is at that
-position. 
-
-\new
-The `\putpic <x> <y> <width> <height> {<image>}` puts the `<image>` of given 
-`<width>` and `<height>` at given position (its left-bottom corner).
-You can write `\nospec` instead `<width>` or `<height>` if this parameter is
-not given.
-
-\sec Others
-%%%%%%%%%%%
-
-\secc[lang] Using more languages
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\OpTeX/ prepares hyphenation patterns for all languages if such patterns are
-available in your \TeX/ system. 
-\new
-Only USenglish patterns (original from Plain \TeX/) are preloaded.
-Hyphenation patterns of all another languages are loaded on demand when you first use
-the `\<iso-code>lang` command in your document. 
-For example `\delang` for German, `\cslang` for
-Czech, `\pllang` for Polish. The <iso-code> is a shortcut 
-of the language (mostly from ISO 639-1). 
-You can list all available languages by `\langlist` 
-macro. This macro prints now:
-
-\medskip
-{\typosize[9/11.5]\emergencystretch=4em \hbadness=2000
-\noindent \langlist
-\par}
-\medskip
-
-\new
-For compatibility with e-plain macros, there is the command
-`\uselanguege{<language>}`. The parameter <language> is long form of
-language name, i.e.\ `\uselanguage{Czech}` works the same as `\cslang`.
-The `\uselanguage` parameter is case insensitive.
-
-For compatibility with \csplain/, there are macros `\ehyph`, `\chyph`,
-`\shyph` which are equivalent to `\enlang`, `\cslang` and `\sklang`.
-
-You can switch between language patterns by `\<iso-code>lang` commands mentioned
-above. Default is `\enlang`.
-
-\OpTeX/ generates three words used for captions and titles in technical
-articles or books: \"Chapter", \"Table" and \"Figure". These words need to be known
-in used language and it depends on the previously used language selectors
-`\<iso-code>lang`. \OpTeX/ declares these words only for few languages:
-\new
-Czech, German, Spanish, French, Greek, Italian, Polish, Russian, Slovak and 
-English, If you need to use these words in another languages or you want to
-auto-generate more words in your macros, then you can declare it by 
-`\sdef` or `\_langw` commands as shown in the file `languages.opm`.
-
-The `\makeindex` command needs to know the sorting rules used in your language.
-\OpTeX/ defines only few language rules for sorting: Czech,
-Slovak and English. How to declare sorting rules for more languages are
-described in the file `makeindex.opm`.
-
-If you declare `\<iso-code>quotes`, then the control sequences `\"` and `\'`
-should be used like this: `\"<quoted text>"` or `\'<quoted text>'` 
-(note that the terminating character is the same but it isn't escaped).
-This prints language dependent normal or alternative quotes around 
-<quoted text>. The language is specified by <iso-code>. \OpTeX/ declares
-quotes only for Czech, German, Spanish, French, Greek, Italian, Polish, 
-Russian, Slovak and English (`\csquotes`, `\dequotes`, \dots, `\enquotes`). 
-You can simply define your own quotes as shown in `languages.opm` file.
-The `\"` is used for quotes visualy more similar to the `"` character which
-can be primary quotes or secondary quotes depending on the language rules.
-May be you want to alternate meaning of these two types of quotes. Use
-`\<isocode>quotes\altquotes` in such case.
-
-\secc Pre-defined styles
-%%%%%%%%%%%%%%%%%%%%%%%
-
-\OpTeX/ defines three style-declaration macros `\report`, `\letter` and
-`\slides`. You can use them at the beginning of your document if you are
-preparing these types of document and you don't need to create your own
-macros.
-
-The `\report` declaration is intended to create reports. It 
-sets default font size to 11\,pt and `\parindent` (paragraph indentation) to 1.2\,em.
-The `\tit` macro uses smaller font because we assume that \"chapter level"
-will be not used in reports. The first page has no page number, but next pages
-are numbered (from number~2). Footnotes are numbered from one in whole
-document. The macro `\author <authors><end-line>` can be used when 
-`\report` is declared. It prints `<authors>` in italics at center of the
-line. You can separate authors by `\nl` to more lines.
-
-The `\letter` declaration is intended to create letters. See an example in
-the file `op-letter.tex`. The `\letter` style sets default
-font size to 11\,pt and `\parindent` to 0\,pt. It sets half-line space
-between paragraphs. The page numbers are not printed. The `\subject` macro
-can be used, it prints the word \"Subject:" or \"Věc" (or something else
-depending on current language) in bold. Moreover, the `\address` macro
-can be used when `\letter` is declared. The usage of the `\address` macro
-looks like:
-
-\begtt
-\address
-  <first line of address>
-  <second line of address>
-  <etc.>
-  <empty line>
-\endtt
-
-It means that you need not to use any special mark at the end of lines: end
-of lines in the source file are the same as in printed output. The
-`\address` macro creates `\vtop` with address lines. The width of such
-`\vtop` is equal to the most wide line used in it. So, you can use
-`\hfill\address...` in order to put the address box to the right side of the
-document. Or you can use `<prefixed text>\address...` to put 
-`<prefixed text>` before first line of the address.
-
-The `\slides` style ceates a simple presentation slides. See an example
-in the file `op-slides.tex`. Run `optex op-slides.tex` and see the usage of
-`\slides` style in the file `op-slides.pdf`. 
-
-Analogical declaration macros `\book` is not prepared. Each book needs an
-individual typographical care so you need to create specific macros for
-design. 
-
-\secc Lorem ipsum dolor sit
-%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-\new
-A designer needs to concentrate to the design of the output and maybe he/she 
-needs a material for testing macros. There is the possibility to generate a
-neutral text for such experiments. Use `\lorem[<number>]` or
-`\lorem[<from>-<to>]`. It prints a paragraph (or paragraphs) with neutral
-text. The numbers <number> or <from>, <to> must be in the range 1 to 150
-because there are 150 paragraphs with neutral text prepared for you.
-The `\lipsum` macro is equivalent to `\lorem`. Example `\lipsum[1-150]`
-prints all prepared paragraphs.
-
-\secc Logos
-%%%%%%%%%%
-
-\new
-The control sequences for typical logos can be terminated by optional `/`
-which is ignored when printing. This makes logos more legible in source file:
-
-\begtt
-We are using \TeX/ because it is cool. \OpTeX/ is better than \LaTeX.
-\endtt
-
-\secc The last page
-%%%%%%%%%%%%%%%%%%%
-
-The number of the last page (it may be different from number of pages) is
-expanded by `\lastpage` macro. It expands to `?` in first \TeX/ run and to
-the last page in next \TeX/ runs. 
-
-There is an example for footlines in the format \"current page / last page": 
-
-\begtt
-\footline={\hss \fixedrm \folio/\lastpage \hss}
-\endtt
-
-\new
-The `\lastpage` expands to the last `\folio` which is a decimal
-number or roman nummeral (when `\pageno` is negative). If you need to know
-total pages used in the document, use `\totalpages` macro. It expands to 
-zero (in first \TeX/ run) or to the number of all pages in the document
-(in next \TeX/ runs). 
-
-\secc Use \OpTeX/
-%%%%%%%%%%%%%%%%%
-
-\new
-The command `\useOpTeX` (or `\useoptex`) does nothing in \OpTeX/ but it causes 
-an error (undefined control sequence) when another format is used. You can
-put it as the first command in your document:
-
-\begtt
-\useOpTeX % we are using OpTeX format, no LaTeX :) 
-\endtt
-
-\sec Summary
-%%%%%%%%%%%%
-
-\begtt     \typosize[10/12]\adef!{\string\endtt}\adef&{\kern.25em}
-\tit Title (terminated by end of line)
-\chap Chapter Title (terminated by end of line)
-\sec Section Title (terminated by end of line)
-\secc Subsection Title (terminated by end of line)
-
-\maketoc         % table of contents generation
-\ii item1,item2  % insertion the items to the index
-\makeindex       % the index is generated
-
-\label [labname]  % link target location
-\ref [labname]    % link to the chapter, section, subsection, equation
-\pgref [labname]  % link to the page of the chapter, section, ...
-
-\caption/t  % a numbered table caption
-\caption/f  % a numbered caption for the picture
-\eqmark     % a numbered equation
-
-\begitems       % start list of the items
-\enditems       % end of list of the items
-\begtt          % start verbatim text
-!          % end verbatim text
-\activettchar X % initialization character X for in-text verbatim
-\code           % another alternative for in-text verbatim
-\verbinput      % verbatim extract from the external file
-\begmulti num   % start multicolumn text (num columns)
-\endmulti       % end multicolumn text
-
-\cite [labnames]  % refers to the item in the lits of references
-\rcite [labnames] % similar to \cite but [] are not printed.
-\sortcitations \shortcitations \nonumcitations % cite format
-\bib [labname]  % an item in the list of references
-\usebib/? (style) bib-base % direct using of .bib file, ? in {s,c}
-
-\fontfam [FamilyName] % selection of font family
-\typosize [font-size/baselineskip] % size setting of typesetting
-\typoscale [factor-font/factor-baselineskip] % size scaling
-\thefontsize [size] \thefontscale [factor]   % current font size
-
-\inspic file.ext    % insert a picture, extensions: jpg, png, pdf
-\table {rule}{data} % simple macro for the tables like in LaTeX
-
-\fnote {text}   % footnote (local numbering on each page)
-\mnote {text}   % note in the margin (left or right by page number)
-
-\hyperlinks {color-in}{color-out} % PDF links activate as clickable
-\outlines {level}   % PDF will have a table of contents in the left tab
+\insertoutline{CONTENTS} \outlines{0} 
 
-\magscale[factor]  % resize typesetting, line/page breaking unchanged
-\margins/pg format (left, right, top, bottom)unit % margins setting
+\notoc\nonum \sec Contents
+\maketoc
 
-\report \letter \slides  % style declaration macros
-\endtt
+\chap User documentation
 
+\input optex-userdoc
+\endgroup
 
-\sec Compatibility with Plain \TeX/
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%\end
 
-All macros of Plain \TeX/ are re-written in \OpTeX/. Common macros should
-work in the same sense as in original Plain \TeX. Internal control sequences
-\new 
-like `\p@` or `\f@@t` are removed and mostly replaced by control sequences
-prefixed by `_` (like `\_this`). All primitives and common macros have two
-control sequences with the same meaning: in prefixed and unprefixed form.
-For example `\hbox` is equal to `\_hbox`. 
-Internal macros of \OpTeX/ have and use only prefixed form. User should use
-unprefixed forms, but prefixed forms are accessible too, because the `_` is
-set as a letter category code globally (in macro files and in users document too). User
-should re-define unprefixed forms of control sequences with no worries that
-something internal will be broken (only the sequence `\par` cannot be
-re-defined without internal change of \TeX/ behavior because it is
-hard-coded in \TeX/s tokenization processor).
+\input optex-techdoc
 
-\new
-The Latin Modern 8bit fonts instead Computer Modern 7bit fonts are
-preloaded in the format, but only few ones. The full family set is ready to
-use after the command `\fontfam[LMfonts]` which reads the fonts in OTF
-format.
+\vfil\break
 
-\new
-The text accents macros like `\'`, `\v`, `\"` are undefined\fnote 
-{The math accents macros like `\acute`, `\bar`, `\dot`, `\hat` still work.}
-in \OpTeX/. Use real
-letters like á, ř, ž in your source document instead these old accents macros.
-If you really want to use them, you can initialize them by `\oldaccents`
-command. But we don't recommend it.
+\def\_printchap#1{\noindent{\_printrefnum[@]\_secfont #1}\medskip}
 
-\new
-The default paper size is not set as letter with 1\,in margins but as A4 with
-2.5\,cm margins. You can change it, for example by 
-`\margins/1 letter (1,1,1,1)in`. This example sets the classical Plain \TeX/
-page layout.
+\nonum\chap Index
 
-\new
-The origin for typographical area is not at top left 1\,in 1\,in coordinates
-but at top left paper corner exactly. For example, `\hoffset` includes directly left
-margin.
+\begmulti 3 \tt \makeindex \endmulti
 
 \bye
-
-- 
cgit v1.2.3

