From d9783f18c815aa817e3c05a0c214d9421d1c15d8 Mon Sep 17 00:00:00 2001
From: Karl Berry <karl@freefriends.org>
Date: Thu, 4 Apr 2019 20:52:35 +0000
Subject: hvfloat (4apr19)

git-svn-id: svn://tug.org/texlive/trunk@50753 c570f23f-e606-0410-a88d-b1316a301751
---
 Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex | 989 ++++++++++--------------
 1 file changed, 392 insertions(+), 597 deletions(-)

(limited to 'Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex')

diff --git a/Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex b/Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex
index e9787059bd0..b3b94022b49 100644
--- a/Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex
+++ b/Master/texmf-dist/doc/latex/hvfloat/hvfloat.tex
@@ -1,7 +1,7 @@
-%% $Id: hvfloat.tex 1009 2019-04-01 12:44:03Z herbert $
-%\listfiles
+%% $Id: hvfloat.tex 1034 2019-04-04 07:29:45Z herbert $
+\listfiles
 \errorcontextlines=100
-\documentclass[usegeometry,twoside,paper=a4]{scrartcl}
+\documentclass[twoside,paper=a4]{scrartcl}
 \usepackage{fontspec}
 \usepackage{libertinus}
 %\usepackage[scaled=0.85]{beramono}
@@ -50,7 +50,6 @@
 \usepackage{hvindex}
 \usepackage[all=!htb]{hvfloat-fps}
 \usepackage[fbox,hyperref]{hvfloat}
-\def\hvVersion{2.10}
 \captionsetup{format=plain,font=sf,labelfont=sf}
 \captionsetup[sub]{format=plain,font=sf,labelfont=sf}
 
@@ -155,7 +154,7 @@
 
 
 \begin{document}
-\title{Package \texttt{hvfloat}\\Positioning, rotating and scaling of objects and captions\\ver \hvVersion}
+\title{Package \texttt{hvfloat}\\Rotating and scaling of objects and captions\\ver \hvFileVersion}
 \author{Herbert Voß\thanks{\protect\url{hvoss@tug.org}}}
 \date{\today}
 \maketitle
@@ -181,7 +180,7 @@ marginnote \fbox{float} is set into the margin. This is done also only for demon
 	objectAngle=120,
 	capAngle=-210,
 	objectPos=center
-]{figure}{\protect\fbox{\includegraphics[scale=0.9]{rose}}}{\protect\fbox{What a nice Caption :-)}}{fig:title}
+]{figure}{\protect\fbox{\includegraphics[scale=0.9]{images/rose}}}{\protect\fbox{What a nice Caption :-)}}{fig:title}
 
 \vspace*{\fill}
 
@@ -203,15 +202,29 @@ marginnote \fbox{float} is set into the margin. This is done also only for demon
 \Loption{fbox} & The objects and captions are put into a \Lcs{fbox} command, like in 
 this documentation. This doesn't make real sense and is only for some demonstration useful or for locating
 problems if images seems to have too much whitespace.\\
-\Loption{hyperref} & Load package \Lpack{hyperref} and also package \Lpack{hypcap}. 
+\Loption{hyperref} & Load package \Lpack{hyperref}. % and also package \Lpack{hypcap}. 
 \end{tabularx}
 
-
 \bigskip
 
 The length \Lskip{belowcaptionskip} is set by \LaTeX{} to 0pt and changed in \Lpack{hvfloat} to the 
 same value than \Lskip{abovecaptionskip}. This length can be changed to another value in the usual 
-way with \CMD{setlength} or \CMD{addtolength}.
+way with \Lcs{setlength} or \Lcs{addtolength}.
+
+The following packages are loaded by \Lpack{hvfloat} and the optional argument
+\Loption{hypcap} is passed to the packages \Lpack{caption} and \Lpack{subcaption}:
+
+\Lpack{caption}, 
+\Lpack{subcaption},
+\Lpack{atbegshi},
+%\RequirePackage{hyperref}
+\Lpack{expl3}, \Lpack{multido},
+\Lpack{graphicx},
+\Lpack{xkeyval},
+\Lpack{ifoddpage}, and
+\Lpack{afterpage}.
+
+
 
 \section{The Macros and optional arguments}
 The syntax for the  macros and \Lcs{setDefaults}, \Lcs{hvSet}, and \CMD{hvFloat} is
@@ -222,8 +235,8 @@ The syntax for the  macros and \Lcs{setDefaults}, \Lcs{hvSet}, and \CMD{hvFloat}
 \Lcs{hvFloat}\OptArg*{*}\OptArgs\OptArg*{+}\Largb{float type}\Largb{floating object}\OptArg{short caption}\Largb{long caption}\Largb{label}
 \end{BDef}
 
-The optional \OptArg*{+} is explained in section~\vref{sec:multifloats}.
-
+The star version is explained in section~\vref{star-version0} and \vref{star-version} and
+the optional \OptArg*{+} is explained in section~\vref{sec:multifloats}.
 
 \Lcs{hvSet} allows the global setting of keywords and \Lcs{setDefaults} sets all keywords to
 its default value as shown in Table~\vref{tab:options}.
@@ -237,7 +250,6 @@ There are some more macros defined, more or less for internally use in \Lpack{hv
 be used for own purposes.
 
 
-
 \begin{BDef}
 \Lcs{figcaption}\OptArg{short caption text}\Largb{caption text}\\
 \Lcs{tabcaption}\OptArg{short caption text}\Largb{caption text}
@@ -273,10 +285,18 @@ Internally the style is saved in a macro named \verb|\hv@<name>|.
 %\subsection{The Options}
 There are the following keywords:
 
-\begin{xltabular}{\textwidth}{l>{\small\ttfamily}cX}
-\caption{The optional keywords for the macro \nxLcs{hvFloat}}\label{tab:options}\\\hline
-\emph Keyword & \emph Default & \emph Description\\\hline
-\Lkeyword{floatPos} & \texttt{htb} & This is \emph{not} the same placement option like the one from the floats.\\
+\begin{xltabular}{\textwidth}{@{} l>{\small\ttfamily}cX @{}}
+\caption{The optional keywords for the macro \nxLcs{hvFloat}}\label{tab:options}\\\toprule
+\emph Keyword & \emph Default & \emph Description\\\midrule
+\endfirsthead
+\midrule
+\emph Keyword & \emph Default & \emph Description\\\midrule
+\endhead
+\midrule
+\endfoot
+\bottomrule
+\endlastfoot
+\Lkeyword{floatPos} & \texttt{htb} & This is \emph{not} the same default placement setting like the one from the floats.\\
 \Lkeyword{rotAngle} & 0& The value for the angle if both, the object and the caption should be rotated in the same way.\\
 
 \Lkeyword{capWidth} & n& The width of the caption. Can be »\texttt{n}« like a natural width, 
@@ -284,17 +304,20 @@ There are the following keywords:
 
 \Lkeyword{capAngle} & 0 & The value for the angle if the caption should be rotated. Counted anti clockwise.\\
 
-\Lkeyword{capPos} & b& The position of the caption relative to the object. Possible values 
-    are \Lkeyval{left}, \Lkeyval{before},
-        \Lkeyval{right}, \Lkeyval{after},
-        \Lkeyval{evenPage}, and \Lkeyval{oddPage}. 
-The
-    last two are only valid for the option \texttt{fullpage}.\\
+\Lkeyword{capPos} & before& The position of the caption relative to the object. Possible values are\\ 
+                  &       & \Lkeyval{before}: \emph{always} before (left) from the object.\\
+                  &       & \Lkeyval{left}: \emph{always} before (left) from the object, but on the \emph{same page} in \Index{twocolumn} mode.\\
+                  &       & \Lkeyval{after}: \emph{always} after (right) from the object.\\
+                  &       & \Lkeyval{right}: \emph{always} after (right) from the object, but on the \emph{same page} in \Index{twocolumn} mode.\\
+                  &       & \Lkeyval{inner}: in \Index{twoside} mode always typeset at the inner margin.\\
+                  &       & \Lkeyval{outer}: in \Index{twoside} mode always typeset at the outer margin.\\
+                  &       & \Lkeyval{evenPage}: in \Index{twoside} mode with \Index{fullpage} objects always on an even page.\\
+                  &       & \Lkeyval{oddPage}: in \Index{twoside} mode with \Index{fullpage} objects always on an odd page.\\
 
 \Lkeyword{capVPos}& c& This is only important for \texttt{capPos=left|right}. Only in this case the 
     caption can vertically placed at the \Lkeyval{bottom}, \Lkeyval{center} and \Lkeyval{top}.\\
 
-\Lkeyword{objectPos} & c & The horizontalplacement of the object relative to the document. Possible values are (\textbf{l})eft|(\textbf{c})enter|(\textbf{r})ight.\\
+\Lkeyword{objectPos} & center & The horizontalplacement of the object relative to the document. Possible values are (\textbf{l})eft|(\textbf{c})enter|(\textbf{r})ight.\\
 
 \Lkeyword{objectAngle} & 0 & The value for the angle if the object should be rotated. Counted anti clockwise.\\
 
@@ -310,7 +333,6 @@ The
 \Lkeyword{objectFrame} & false & put a frame with no separation around the float object.\\
 
 \Lkeyword{style} & --- & Use a defined style\\
-\hline
 \end{xltabular} 
 
 
@@ -330,11 +352,11 @@ or \Lenv{table} environment, f.ex.:
 
 \normalsize
 
-\hvFloat{figure}{\includegraphics{rose}}{Without any keywords (only the \texttt{fbox} package option)}{fig:0}
+\hvFloat{figure}{\includegraphics{images/rose}}{Without any keywords (only the \texttt{fbox} package option)}{fig:0}
 
 Code for figure \ref{fig:0}:
 \begin{lstlisting}
-\hvFloat{figure}{\includegraphics{rose}}{Without any keywords (only the \texttt{fbox} package option)}{fig:0}
+\hvFloat{figure}{\includegraphics{images/rose}}{Without any keywords (only the \texttt{fbox} package option)}{fig:0}
 \end{lstlisting}
 
 \Float
@@ -384,12 +406,12 @@ floating environments like \Lenv{figure} or \Lenv{table}:
 
 
 \begin{lstlisting}
-\hvFloat[floatPos=!htb]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb]{figure}{\includegraphics{images/rose}}%
   {Default caption width setting, which is the natural width with respect to the current linewidth.}{fig:width0}
 \end{lstlisting}
 
 \Float
-\hvFloat[floatPos=!htb]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb]{figure}{\includegraphics{images/rose}}%
   {Default caption width setting, which is the natural width with respect to the current linewidth.}{fig:width0}
 
 
@@ -408,13 +430,13 @@ minus the width of the object and the space between object and caption, which is
 \makeatother
 
 \begin{lstlisting}
-\hvFloat[floatPos=!htb,capPos=after,objectFrame]{figure}{\includegraphics[scale=1.5]{rose}}%
+\hvFloat[floatPos=!htb,capPos=after,objectFrame]{figure}{\includegraphics[scale=1.5]{images/rose}}%
   {Caption right beside with a \emph{natural} width, which is given by the width of the object,
   the separation between object and caption, and the current linewidth.}{fig:width1}
 \end{lstlisting}
 
 \Float
-\hvFloat[floatPos=!htb,capPos=after,objectFrame]{figure}{\includegraphics[scale=1.5]{rose}}%
+\hvFloat[floatPos=!htb,capPos=after,objectFrame]{figure}{\includegraphics[scale=1.5]{images/rose}}%
   {Caption right beside with a \emph{natural} width, which is given by the width of the object,
   the separation between object and caption, and the current linewidth.}{fig:width1}
 
@@ -430,13 +452,13 @@ is greater than 1.
 %greater caption width than this maximal caption width, it will automatically set to the maximal width:
 
 \begin{lstlisting}
-\hvFloat[floatPos=!htb,capWidth=0.9]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb,capWidth=0.9]{figure}{\includegraphics{images/rose}}%
   {Caption below with a width of 0.9 of the current line width (column width), which is
    in this special case \the\linewidth. Divide it by 28.82 to get cm.}{fig:width2}
 \end{lstlisting}
 
 \Float
-\hvFloat[floatPos=!htb,capWidth=0.9]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb,capWidth=0.9]{figure}{\includegraphics{images/rose}}%
   {Caption below with a width of 0.9 of the current line width (column width), which is
    in this special case \the\linewidth. Divide it by 28.82 to get cm.}{fig:width2}
 
@@ -451,14 +473,14 @@ If not then the width is set to the possible value between object and margin:
 \begin{lstlisting}
 \hvFloat[floatPos=!htb,
          capPos=after,
-         capWidth=0.9]{figure}{\includegraphics[scale=1.5]{rose}}%
+         capWidth=0.9]{figure}{\includegraphics[scale=1.5]{images/rose}}%
   {Caption right beside with a width setting of \texttt{0.9\textbackslash linewidth}
   which is too big for this example and therefore corrected 
   by the macro to the maximal width.}{fig:width3}
 \end{lstlisting}
 
 \Float
-\hvFloat[floatPos=!htb,capPos=after,capWidth=0.9]{figure}{\includegraphics[scale=1.5]{rose}}%
+\hvFloat[floatPos=!htb,capPos=after,capWidth=0.9]{figure}{\includegraphics[scale=1.5]{images/rose}}%
   {Caption right beside with a width setting of \texttt{0.9\textbackslash linewidth}
   which is too big for this example and therefore corrected by the macro to the maximal width.}{fig:width3}
 
@@ -469,13 +491,13 @@ With \Lkeyset{capWidth=w} the caption width is like the object width which makes
 real sense if you have a lot of identical images with respect to its widths.
 
 \begin{lstlisting}
-\hvFloat[floatPos=!htb,capWidth=w]{figure}{\includegraphics[width=0.5\linewidth]{CTAN}}%
+\hvFloat[floatPos=!htb,capWidth=w]{figure}{\includegraphics[width=0.5\linewidth]{images/CTAN}}%
   {Caption below with a width of the given object which may be a problem
   if it is a very small object.}{fig:width4}
 \end{lstlisting}
 
 \Float
-\hvFloat[floatPos=!htb,capWidth=w]{figure}{\includegraphics[width=0.5\linewidth]{CTAN}}%
+\hvFloat[floatPos=!htb,capWidth=w]{figure}{\includegraphics[width=0.5\linewidth]{images/CTAN}}%
   {Caption below with a width of the given object which may be a problem
   if it is a very small object.}{fig:width4}
 
@@ -486,12 +508,12 @@ With \Lkeyset{capWidth=h} the caption width is like the object height which make
 real sense if you want to put a rotated caption beside the object.
 
 \begin{lstlisting}
-\hvFloat[floatPos=!htb,capPos=after,capWidth=h,capAngle=90,objectFrame]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb,capPos=after,capWidth=h,capAngle=90,objectFrame]{figure}{\includegraphics{images/rose}}%
   {Caption beside with a width of the given object height which may be a problem
   if it is a very small object.}{fig:width5}
 \end{lstlisting}
 
-\hvFloat[floatPos=!htb,capPos=after,capWidth=h,capAngle=90,objectFrame]{figure}{\includegraphics{rose}}%
+\hvFloat[floatPos=!htb,capPos=after,capWidth=h,capAngle=90,objectFrame]{figure}{\includegraphics{images/rose}}%
   {Caption beside with a width of the given object height which may be a problem
   if it is a very small object.}{fig:width5}
 
@@ -508,7 +530,7 @@ Code for figure \ref{fig:1}:
   [floatPos=htb,
    capPos=right,
    objectFrame,
-   objectPos=c]{figure}{\includegraphics[scale=0.9]{rose}}%
+   objectPos=c]{figure}{\includegraphics[scale=0.9]{images/rose}}%
   [Caption beside object and vertically centered]%
   {Caption vertically centered right beside the float with a natural caption width 
    (the default). \blindtext}%
@@ -520,7 +542,7 @@ Code for figure \ref{fig:1}:
   [floatPos=htb,
    capPos=right,
    objectFrame,
-   objectPos=c]{figure}{\includegraphics[scale=0.9]{rose}}%
+   objectPos=c]{figure}{\includegraphics[scale=0.9]{images/rose}}%
   [Caption beside object and vertically centered]%
   {Caption vertically centered right beside the float with a natural caption width 
    (the default). \blindtext}%
@@ -537,7 +559,7 @@ Code for figure \ref{fig:2}:
    capWidth=h,% of \columnwidth
    capAngle=90,
    objectFrame
-  ]{figure}{\includegraphics{rose}}%
+  ]{figure}{\includegraphics{images/rose}}%
   [Centered Caption beside Object]%
   {Caption vertically centered left beside the float with a caption width 
    of \texttt{capWidth=h}, which is the height of the object.}{fig:2}
@@ -550,7 +572,7 @@ Code for figure \ref{fig:2}:
    capWidth=h,% of \columnwidth
    capAngle=90,
    objectFrame
-  ]{figure}{\includegraphics{rose}}%
+  ]{figure}{\includegraphics{images/rose}}%
   [Centered Caption beside Object]%
   {Caption vertically centered left beside the float with a caption width 
    of \texttt{capWidth=h}, which is the height of the object.}{fig:2}
@@ -572,7 +594,7 @@ Code for figure \ref{fig:3}:
 	capAngle=180,
 	objectAngle=90,
 	capVPos=center,
-	objectPos=center]{figure}{\frame{\includegraphics{rose}}}%
+	objectPos=center]{figure}{\frame{\includegraphics{images/rose}}}%
 	[Centered Caption beside Object]{%
 	{Caption vertically centered right beside the float with a caption width of the height 
 	 of the image and a rotation of the caption and the object.}{fig:3}
@@ -586,7 +608,7 @@ Code for figure \ref{fig:3}:
 	capAngle=180,
 	objectAngle=90,
 	capVPos=center,
-	objectPos=center]{figure}{\frame{\includegraphics{rose}}}%
+	objectPos=center]{figure}{\frame{\includegraphics{images/rose}}}%
   {Caption vertically centered right beside the float with a caption width of the height of the image and 
    a rotation of the caption and the object.}{fig:3}
 
@@ -601,7 +623,7 @@ chooses only  \Lkeyset{capPos=outer}.
 
 Code for figure~\ref{fig:20}:
 \begin{lstlisting}
-\hvFloat[capPos=inner]{figure}{\includegraphics{rose}}%
+\hvFloat[capPos=inner]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption on the inner side]{%
 	Caption set with the parameter setting \texttt{capPos=inner}, which will be
 	a caption on the right side for an even page and on the left side for
@@ -609,34 +631,39 @@ Code for figure~\ref{fig:20}:
 \end{lstlisting}
 
 \Float[capPos=inner]
-\hvFloat[capPos=inner]{figure}{\includegraphics{rose}}%
+\hvFloat[capPos=inner]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption on the inner side]{%
 	Caption set with the parameter setting \texttt{capPos=inner}, which will be
 	a caption on the right side for an even page and on the left side for
 	an odd page.}{fig:20}
 
 \blindtext
+
+
+\label{page:1}\checkoddpage
+Now the same Image with \Lkeyset{capPos=outer}. The current pagenumber is~\pageref{page:1}, an \ifoddpage odd \else
+even \fi page. We now set a pagebreak at the end of the second image to see if it works with 
+\emph{inner}/\emph{outer}.
+
+
+
+
 \begin{lstlisting}
-\hvFloat[capPos=inner]{figure}{\includegraphics{rose}}%
+\hvFloat[capPos=outer]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption on the inner side]{%
-	Caption set with the parameter setting \texttt{capPos=inner}, which will be
+	Caption set with the parameter setting \texttt{capPos=outer}, which will be
 	a caption on the right side for an even page and on the left side for
 	an odd page.}{fig:20b}
 \end{lstlisting}
 
-\Float[capPos=inner]
-\hvFloat[capPos=inner]{figure}{\includegraphics{rose}}%
+\Float[capPos=outer]
+\hvFloat[capPos=outer]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption on the inner side]{%
-	Caption set with the parameter setting \texttt{capPos=inner}, which will be
+	Caption set with the parameter setting \texttt{capPos=outer}, which will be
 	a caption on the right side for an even page and on the left side for
 	an odd page.}{fig:20b}
 
 
-\label{page:1}\checkoddpage
-Now the same Image with \Lkeyset{capPos=outer}. The current pagenumber is~\pageref{page:1}, an \ifoddpage odd \else
-even \fi page. We now set a pagebreak at the end of the second image to see if it works with 
-\emph{inner}/\emph{outer}.
-
 
 
 \Float
@@ -645,7 +672,7 @@ even \fi page. We now set a pagebreak at the end of the second image to see if i
 	capPos=outer,
 	capAngle=0,%
 	capVPos=bottom,%
-	objectPos=center]{figure}{\includegraphics{rose}}%
+	objectPos=center]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption beside Object]{%
 	Caption at the bottom right beside the float with a caption width 
     of \texttt{0.5\textbackslash columnwidth} and and \texttt{capPos=outer}.}{fig:21}
@@ -663,10 +690,10 @@ Code for figure \ref{fig:22}:
 \begin{lstlisting}
 \hvFloat[%
 	capWidth=0.5,% of \columnwidth
-	capPos=outer,%  ====> OUTER
+	capPos=inner,%  ====> INNER
 	capAngle=0,
 	capVPos=bottom,
-	objectPos=center]{figure}{\includegraphics{rose}}%
+	objectPos=center]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption beside Object]{%
 	Caption vertically centered right beside the float with a caption 
    width of \texttt{0.5\textbackslash columnwidth} and \texttt{capPos=outer} }{fig:22}
@@ -675,30 +702,15 @@ Code for figure \ref{fig:22}:
 \Float
 \hvFloat[%
 	capWidth=0.5,% of \columnwidth
-	capPos=outer,
+	capPos=inner,
 	capAngle=0,%
 	capVPos=center,%
-	objectPos=center]{figure}{\includegraphics{rose}}%
+	objectPos=center]{figure}{\includegraphics{images/rose}}%
 	[Centered Caption beside Object]{%
 	Caption vertically centered right beside the float with a caption 
 width of \texttt{0.5\textbackslash columnwidth} and \texttt{capPos=outer}}{fig:22}
 
 
-\iffalse
-\Float[fig:23]
-\hvFloat[%
-	floatPos=htb,%
-	capWidth=0.5,% of \columnwidth
-	capPos=outer,
-	capAngle=0,%
-	capVPos=center,%
-	objectPos=center]{figure}{\includegraphics{rose}}%
-	[Centered Caption beside Object]{%
-	Caption vertically centered right beside the float with a caption width of \texttt{0.5\textbackslash columnwidth} 
-	and \texttt{capPos=outer}.}{}
-
-
-\fi
 
 We have an \checkoddpage
 \ifoddpage odd \else
@@ -719,7 +731,7 @@ The code for figure \ref{fig:4}:
 	capWidth=0.25,%
 	capPos=right,%
 	capVPos=bottom,%
-]{figure}{\frame{\includegraphics{rose}}}{Caption at bottom right beside the float}{fig:4}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption at bottom right beside the float}{fig:4}
 \end{lstlisting}
 
 
@@ -729,7 +741,7 @@ The code for figure \ref{fig:4}:
 	capWidth=0.25,%
 	capPos=right,%
 	capVPos=bottom,%
-]{figure}{\frame{\includegraphics{rose}}}{Caption at bottom right beside the float}{fig:4}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption at bottom right beside the float}{fig:4}
 
 
 
@@ -740,7 +752,7 @@ The code for figure \ref{fig:5}:
 	capWidth=0.25,
 	capPos=right,
 	capVPos=top,
-]{figure}{\frame{\includegraphics{rose}}}{Caption at top left beside the float}{fig:5}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption at top left beside the float}{fig:5}
 \end{lstlisting}
 
 
@@ -750,7 +762,7 @@ The code for figure \ref{fig:5}:
 	capWidth=0.25,%
 	capPos=before,%
 	capVPos=top,%
-]{figure}{\frame{\includegraphics{rose}}}{Caption at top left beside the float}{fig:5}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption at top left beside the float}{fig:5}
 
 
 The code for figure \ref{fig:6}:
@@ -759,7 +771,7 @@ The code for figure \ref{fig:6}:
 	capWidth=0.25,
 	capPos=right,
 	capVPos=center,% the default
-]{figure}{\frame{\includegraphics{rose}}}{Caption centered right beside the float}{fig:6}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption centered right beside the float}{fig:6}
 \end{lstlisting}
 
 
@@ -768,7 +780,7 @@ The code for figure \ref{fig:6}:
 	capWidth=0.25,%
 	capPos=right,%
 	capVPos=center,% the default
-]{figure}{\frame{\includegraphics{rose}}}{Caption centered right beside the float}{fig:6}
+]{figure}{\frame{\includegraphics{images/rose}}}{Caption centered right beside the float}{fig:6}
 
 
 
@@ -790,7 +802,7 @@ The code for figure \ref{fig:7}:
 	capVPos=top,
 	objectPos=left,
 	objectFrame,
-]{figure}{\includegraphics{rose}}{%
+]{figure}{\includegraphics{images/rose}}{%
 	Caption at top right beside the float and object position left}{fig:7}
 \end{lstlisting}
 
@@ -802,9 +814,12 @@ The code for figure \ref{fig:7}:
 	capVPos=top,%
 	objectPos=left,%
 	objectFrame,
-]{figure}{\includegraphics{rose}}{%
+]{figure}{\includegraphics{images/rose}}{%
 	Caption at top right beside the float and object position left}{fig:7}
 
+\blindtext
+
+
 The same with \Lkeyset{capPos=left}:
 
 
@@ -815,7 +830,7 @@ The same with \Lkeyset{capPos=left}:
 	capVPos=top,%
 	objectPos=left,%
 	objectFrame,
-]{figure}{\includegraphics{rose}}{%
+]{figure}{\includegraphics{images/rose}}{%
 	Caption at top right beside the float and object position left}{fig:700}
 
 \blindtext
@@ -824,12 +839,12 @@ The same with \Lkeyset{capPos=left}:
 The code for figure \ref{fig:8}:
 \begin{lstlisting}
 \hvFloat[%
-	capWidth=0.25,%
-	capPos=before,%
-	capVPos=top,%
-	objectPos=right,%
+	capWidth=0.25,
+	capPos=before,
+	capVPos=top,
+	objectPos=right,
 	objectFrame,
-]{figure}{\includegraphics{rose}}{%
+]{figure}{\includegraphics{images/rose}}{%
 	Caption at top leftt beside the float and object position right}{fig:8}
 \end{lstlisting}
 
@@ -841,7 +856,7 @@ The code for figure \ref{fig:8}:
 	capVPos=top,%
 	objectPos=right,%
 	objectFrame,
-]{figure}{\includegraphics{rose}}{%
+]{figure}{\includegraphics{images/rose}}{%
 	Caption at top left beside the float and object position right}{fig:8}
 
 \blindtext
@@ -858,7 +873,7 @@ The code for figure \ref{fig:70}:
 	capPos=right,
 	capVPos=top,
 	objectPos=left,
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 	Caption at top right beside the float and object position left and
 the option \texttt{wide}.}{fig:70}
 \end{lstlisting}
@@ -869,11 +884,11 @@ the option \texttt{wide}.}{fig:70}
 	capPos=right,%
 	capVPos=top,%
 	objectPos=left,%
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 	Caption at top right beside the float and object position left and
 the option \texttt{wide}.}{fig:70}
 
-\blindtext
+%\blindtext
 
 
 The code for figure \ref{fig:80}:
@@ -882,7 +897,7 @@ The code for figure \ref{fig:80}:
 	capPos=left,
 	capVPos=top,
 	objectPos=right,
-  ]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}%
+  ]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}%
   {Caption at top left beside the object and object position left and
    the option \texttt{wide}.}{fig:80}
 \end{lstlisting}
@@ -892,7 +907,7 @@ The code for figure \ref{fig:80}:
 \hvFloat[wide,
 	capPos=left,%
 	capVPos=top,%
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}%
   {Caption at top left beside the object and object position left and
    the option \texttt{wide}.}{fig:80}
 
@@ -905,7 +920,7 @@ For a twosided document it will place the object always in the margin.
 \hvFloat[wide,
 	capPos=inner,
 	capVPos=top,
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 Caption at top and inner beside the float and object position right and
 the option \texttt{wide}.}{fig:81}
 \end{lstlisting}
@@ -915,7 +930,7 @@ the option \texttt{wide}.}{fig:81}
 \hvFloat[wide,
 	capPos=inner,
 	capVPos=top,
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 Caption at top and inner beside the float and object position right and
 the option \texttt{wide}.}{fig:81}
 
@@ -930,7 +945,7 @@ change its side due to the setting \Lkeyset{capPos=outer}.
 \hvFloat[wide,
 	capPos=inner,
 	capVPos=top,
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 Caption at top inner beside the float and object position right and
 the option \texttt{wide}.}{fig:811}
 \end{lstlisting}
@@ -940,16 +955,50 @@ the option \texttt{wide}.}{fig:811}
 \hvFloat[wide,
 	capPos=inner,
 	capVPos=top,
-]{figure}{\includegraphics[width=0.75\linewidth]{CTAN}}{%
+]{figure}{\includegraphics[width=0.75\linewidth]{images/CTAN}}{%
 Caption at top inner beside the float and object position right and
 the option \texttt{wide}.}{fig:811}
 
 
 
-\section{Full text area in Landscape Mode}
+\section{The star version \Lcs{hvFloat*}}\label{star-version0}
+In the \Index{twocolumn} mode the floating environment can be set over both
+columns with the star version \Lcs{hvFloat*}. The floating environment will
+not be on the bottom of the page. The code for 
+the following example (Figure~\vref{default1s2c}) is:
+
+\begin{lstlisting}
+\hvFloat*[capPos=right]{figure}%
+  {\includegraphics{images/frose}}%
+  [A  float with the default caption setting]%
+  {A default caption of a ``'' object with the default setting, which
+   is a ``left''  caption which means that it always appears before the object.
+   This can be an even or odd page. And some more text whch has no
+   real meaning because it fills only the space for a long caption.}%
+  {fig:0}
+\end{lstlisting}
+
+The example shows on page 3 the star version and on page 4 the same without using the star.
+
+
+\begin{figure}[!h]
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/default1s2c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/default1s2c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/default1s2c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/default1s2c}}
+\caption{Output of \texttt{default1s2c} (pages 2 --5)}\label{default1s2c}
+\end{figure}
+
+
+
+
+\section{Full Page Width in Landscape Mode}
 
 If you do not want to load the package \Lpack{lscape} (or \Lpack{pdflscape}) you can use the \Lkeyset{floatPos=p} 
-option to put the image on an own page and rotated by 90 degrees (figure~\ref{fig:9}).
+option to put the image on an own page and rotated by 90 degrees (figure~\ref{fig:9}). 
+
+
+
 
 Code for figure \ref{fig:9}:
 \begin{lstlisting}
@@ -958,13 +1007,13 @@ Code for figure \ref{fig:9}:
 	capPos=bottom,
 	rotAngle=90,
 	objectPos=center,
-]{figure}{\includegraphics[width=0.9\textheight]{CTAN}}%
+]{figure}{\includegraphics[width=0.9\textheight]{images/CTAN}}%
   [Object and Caption in landscape mode]{%
 	Caption and object in landscape mode. \blindtext}{fig:9}
 \end{lstlisting}
 
 The float can also be put to the left or to the right  (above/below in landscape) 
-with the \Lkeyset{objectPos=left} parameter
+with the \Lkeyset{objectPos=l} parameter
 
 \Float[landscape]
 \hvFloat[%
@@ -972,7 +1021,7 @@ with the \Lkeyset{objectPos=left} parameter
 	capPos=bottom,
 	rotAngle=90,
 	objectPos=center,
-]{figure}{\includegraphics[width=0.9\textheight]{CTAN}}%
+]{figure}{\includegraphics[width=0.9\textheight]{images/CTAN}}%
   [Object and Caption in landscape mode]{%
 	Caption and object in landscape mode. \blindtext}{fig:9}
 
@@ -989,7 +1038,7 @@ The code for figure \ref{fig:10}:
 	objectAngle=90,
 	capAngle=-90,
 	objectPos=left,
-]{figure}{\includegraphics[width=\textheight]{CTAN}}%
+]{figure}{\includegraphics[width=\textheight]{images/CTAN}}%
 	[Rotated Caption in Landscape]{%
 	Caption right beside the float and object position left. The caption rotated by $-90$ 
         degrees.\blindtext}{fig:10}
@@ -1003,15 +1052,16 @@ The code for figure \ref{fig:10}:
 	objectAngle=90,%
 	capAngle=-90,%
 	objectPos=left%
-]{figure}{\includegraphics[width=\textheight]{CTAN}}%
+]{figure}{\includegraphics[width=\textheight]{images/CTAN}}%
 	[Rotated Caption in Landscape]{%
 	Caption right beside the float and object position left. The caption rotated by $-90$ degrees.
         \blindtext}{fig:10}
 
 
 
-\Blindtext
+\blindtext
 
+\blindtext
 
 
 
@@ -1029,7 +1079,7 @@ Some nonsense text before the following \emph{non floating} object.
 	capVPos=bottom,
 	objectPos=center,
 	objectFrame,
-]{figure}{\includegraphics[scale=1.5]{rose}}%
+]{figure}{\includegraphics[scale=1.5]{images/rose}}%
 	[Nonfloat Captions]{%
 	Caption of a ``nonfloat'' Object, using the \texttt{nonfloat} Package}{fig:11}
 
@@ -1046,7 +1096,7 @@ Some nonsense text before the following \emph{non floating} object.
 	capVPos=bottom,%
 	objectPos=center,%
         objectFrame,
-]{figure}{\includegraphics[scale=1.5]{rose}}%
+]{figure}{\includegraphics[scale=1.5]{images/rose}}%
 	[Nonfloat Captions]{%
 	Caption of a ``nonfloat'' Object, using the \texttt{nonfloat} Package}{fig:11}
 
@@ -1155,7 +1205,8 @@ The code for figure \ref{fig:text}:
   capAngle=90,
   capPos=right,
   capVPos=top,
-  capWidth=h]{}{\includegraphics{rose}}%
+  objectFrame,
+  capWidth=h]{}{\includegraphics{images/rose}}%
   [``\texttt{onlyText}'' Caption]{%
     Demonstration of the \texttt{onlyText} Parameter, which makes it 
     possible to put some text beside a floating object without getting 
@@ -1169,15 +1220,17 @@ The code for figure \ref{fig:text}:
 	capAngle=90,%
 	capPos=right,%
 	capVPos=top,%
-	capWidth=h]{}{\includegraphics{rose}}%
+	objectFrame,
+	capWidth=h]{}{\includegraphics{images/rose}}%
 	[``\texttt{onlyText}'' Caption]{%
 	Demonstration of the \texttt{onlyText} Parameter, which makes it 
 	possible to put some text beside a floating object without getting 
 	a starting \texttt{Figure:} or \texttt{Table:}}{fig:text}
 
-\blindtext
+\bigskip
+%\blindtext
 
-\blindtext
+%\blindtext
 
 \section{Environment \texttt{hvFloatEnv}}\label{sec:env}
 
@@ -1203,6 +1256,7 @@ L    & C      & R     \\\hline
 \end{hvFloatEnv}
 
 
+\bigskip
 The environment has an optional argument for setting the line width which is preset to \Ldim{textwidth}.
 The object is always centered.
 
@@ -1236,27 +1290,37 @@ L    & C      & R     \\\hline
 For an image or table which needs the whole space of a page the caption can be 
 printed at the bottom of the preceeding or following page. It is possible in
 oneside and twoside mode, but makes only real sense in the twoside mode.
-
+%
 \Lpack{hvfloat} defines three additional optional arguments for placing
 images in a complete column, page or paper:
 
+\noindent
+\minipage[t]{0.49\linewidth}
 \begin{verbatim}
 \define@key{Gin}{fullpage}[true]{%
   \def\Gin@ewidth{\columnwidth}%
   \def\Gin@eheight{\textheight}%
   \Gin@boolkey{false}{iso}%
 }
-\define@key{Gin}{FullPage}[true]{%
-  \def\Gin@ewidth{\textwidth}%
-  \def\Gin@eheight{\textheight}%
-  \Gin@boolkey{false}{iso}%
-}
 \define@key{Gin}{FULLPAGE}[true]{%
   \def\Gin@ewidth{\paperwidth}%
   \def\Gin@eheight{\paperheight}%
   \Gin@boolkey{false}{iso}%
 }
 \end{verbatim}
+\endminipage\hfill
+\minipage[t]{0.49\linewidth}
+\begin{verbatim}
+\define@key{Gin}{FullPage}[true]{%
+  \def\Gin@ewidth{\textwidth}%
+  \def\Gin@eheight{\textheight}%
+  \Gin@boolkey{false}{iso}%
+}
+\end{verbatim}
+\endminipage
+
+Figure~\vref{fig:fullpage60} shows the meaning of the optional arguments \Lkeyword{fullpage}, 
+\Lkeyword{FullPage}, and \Lkeyword{FULLPAGE} for \Lcs{inclugegraphics}\OptArg{...}\Largb{tiger}.
 
 \begin{figure}[!h]
 \frame{\includegraphics[page=1,width=0.24\linewidth]{examples/fullpage1s2c}}\hfill
@@ -1272,15 +1336,16 @@ images in a complete column, page or paper:
 \end{figure}
 
 
-\subsection{Using the textarea}
 
 
+
+\subsection{Using the textarea}
+
 The setting \Lkeyset{capPos=evenPage} (even) or \Lkeyset{capPos=oddPage} (odd) page for
 a document in \Index{twocolumn} mode makes no real sense. For a twosided document a 
 setting like \Lkeyset{capPos=inner} for inner or \Lkeyset{capPos=outer} for outer
 margin makes more sense.
-
-
+%
 For an image or table which needs the whole space of a page the caption can be 
 printed at the bottom of the preceeding or following page. It is possible in
 oneside and twoside mode, but makes only real sense in the twoside mode.
@@ -1288,14 +1353,12 @@ Without any additional argument the caption is set first and the object on the f
 
 
 
-
-
-
 \subsubsection{Using the default or \Lkeyset{capPos=before}}
 
 Without any additional argument the caption is set first (left) at the bottom of the current page 
-and the object on the following page. This is the same setting like \Lkeyset{capPos=before}.
-For the \Loption{twoside} option it makes more sense to use the setting \Lkeyset{capPos=beforeEFT}
+and the object on the following page. This is the same setting like \Lkeyset{capPos=left} for a onecolumn document.
+For the \Loption{twocolumn} option it makes more sense to use the setting \Lkeyset{capPos=before} if the
+caption and object can appear on different pages.
 
 
 
@@ -1303,8 +1366,7 @@ For the \Loption{twoside} option it makes more sense to use the setting \Lkeyset
 \begin{lstlisting}
 \hvFloat[fullpage]%
   {figure}%
-  {\includegraphics[fullpage]{frose}}%
-%  {\includegraphics[width=\linewidth,height=\textheight,keepaspectratio=false]{rose}}%
+  {\includegraphics[fullpage]{images/frose}}%
   [A fullpage float with the default caption setting]%
   {A default caption of a ``fullpage'' object with the default setting, which
    is a ``left''  caption which means that it always appears ``before'' the object.
@@ -1317,43 +1379,13 @@ For the \Loption{twoside} option it makes more sense to use the setting \Lkeyset
 
 
 
-\iffalse
-\Float[default]
-\hvFloat[fullpage]%
-  {figure}%
-  {\includegraphics[fullpage]{frose}}%
-  [A fullpage float with the default caption setting]%
-  {A default caption of a ``fullpage'' object with the default setting, which
-   is a ``left''  caption which means that it always appears ``before'' the object.
-   This can be an even or odd page. And some more text whch has no
-   real meaning because it fills only the space for a long caption.}%
-  {fig:fullpage0}
-\fi
-
-%Figure~\vref{fig:fullpage0} shows the behaviour if only the optional argument \Lkeyword{fullpage} 
-%is used. 
-With this setting the caption is always placed \textit{before} the following object. 
-This maybe sufficient for a \Index{oneside} document but  not the best solution if
-this document is printed on a duplex machine. In such a case
-it may make sense to have the captions always on an even (left) page, even though the
-socument is typeset in a oneside mode. Figure~\vref{fig:fullpage0} shows the output
-for a oneside document with a setting \Lkeyset{capPos=before}.
-
-Depending to the
-used documentclass it can be a problem, if the caption should be placed on the first page.
-In such a case use one of the other setting.
-Table~\vref{tab:fullpage} shows the valid optional arguments for a full page floating object.
-
-
-
 
-\begin{table}
+\begin{table}[!h]
 \caption{Valid optional arguments for a full page object.}\label{tab:fullpage}
 \centering
  \begin{tabularx}{\linewidth}{>{\small\ttfamily}l|>{\small\ttfamily}l|X}\toprule
   \rmfamily Name    & \rmfamily Type        & Description\\\midrule
-\Lkeyword{fullpage} & true|false & Put the caption on the bottom of the preceding or following page/column and the 
-    object alone a page/column.\\
+\Lkeyword{fullpage} & true|false & Put the caption on the bottom of the preceding or following page and the object alone a page.\\
 
 %\Lkeyword{FullPage} & true|false & The same for \Index{twocolumn} mode with object over both columns.\\
 
@@ -1366,9 +1398,9 @@ The pagestyle is set to \texttt{empty}\\
 
 \Lkeyword{separatorLine} & true & Put a line with a predefined width of 0.4pt between
     the text and the caption. Only valid for the keyword \Lkeyword{fullpage}.\\
-\Lkeyword{capPos}  & \shortstack[l]{\Lkeyval{before}\\\Lkeyval{after}\\
-		    \Lkeyval{evenPage}\\\Lkeyval{oddPage}}
-	 & caption before, after, even page, or odd page.\\
+\Lkeyword{capPos}  & value
+	 & caption \Lkeyval{before}, \Lkeyval{after} an object or on an
+		    \Lkeyval{evenPage} or \Lkeyval{oddPage}.\\
 \bottomrule
  \end{tabularx}%
 \end{table}
@@ -1376,6 +1408,23 @@ The pagestyle is set to \texttt{empty}\\
 
 
 
+With this setting the caption is always placed \textit{before} the following object. 
+This maybe sufficient for a \Index{oneside} document but  not the best solution if
+this document is printed on a duplex machine. In such a case
+it may make sense to have the captions always on an even (left) page, even though the
+socument is typeset in a oneside mode. Figure~\vref{fig:fullpage0} shows the output
+for a oneside document with a setting \Lkeyset{capPos=before}.
+
+
+
+Depending to the
+used documentclass it can be a problem, if the caption should be placed on the first page.
+In such a case use one of the other setting.
+Table~\vref{tab:fullpage} shows the valid optional arguments for a full page floating object.
+
+
+
+
 \begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/default1s1c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/default1s1c}}\hfill
@@ -1387,41 +1436,16 @@ The pagestyle is set to \texttt{empty}\\
 \frame{\includegraphics[page=8,width=0.24\linewidth]{examples/default1s1c}}\hfill
 \frame{\includegraphics[page=9,width=0.24\linewidth]{examples/default1s1c}}
 \caption{Output of \texttt{default1s1c} (pages 2--9)}\label{fig:fullpage0}
+\end{figure}
 
-\iffalse
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/LEFT1s1c}}
-
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/LEFT1s1c}}\hfill
-\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/LEFT1s1c}}
-\caption{Output of \texttt{LEFT1s1c} (pages 4--11)}\label{fig:fullpage1-LEFT}
-\fi
 
-\end{figure}
 
-\iffalse
-\begin{figure}[!htb]
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/default2s1c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/default2s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/default2s1c}}
-\caption{Output of \texttt{default2s1c} (twoside pages 2--9)}\label{fig:fullpage1}
-\end{figure}
-\fi
 
 
 
-\FloatBarrier
+%\FloatBarrier
 
+\clearpage
 
 \subsubsection{Using \Lkeyset{capPos=after}}
 
@@ -1432,7 +1456,7 @@ is no check for an even or odd page. This behaviour makes only sense for a onesi
 \begin{lstlisting}
 \hvFloat[fullpage, capPos=after]%
   {figure}%
-  {\includegraphics[fullpage]{frose}}%
+  {\includegraphics[fullpage]{images/frose}}%
   [A float which needs the complete page width and height.]%
   {A Caption of a ``fullpage'' object, which follows on the next page. 
    This can be an even or odd page. And some more text whch has no
@@ -1441,68 +1465,24 @@ is no check for an even or odd page. This behaviour makes only sense for a onesi
 \end{lstlisting}
 
 
-\iffalse
-\Float[capPos=after]
-\hvFloat[fullpage, capPos=after]%
-  {figure}%
-  {\includegraphics[fullpage]{frose}}%
-  [A float which needs the complete page width and height.]%
-  {A Caption of a ``fullpage'' object, which follows on the next page. 
-   This can be an even or odd page. And some more text whch has no
-   real meaning because it fills only the space for a long caption.}%
-  {fig:fullpage1}
-\fi
-
 
 \begin{figure}[!h]
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/right1s1c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/right1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/right1s1c}}
-\caption{Output of \texttt{right1s1c} (pages 2--9)}\label{right1s1c}
-
-
-\iffalse
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/RIGHT1s1c}}
-
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/RIGHT1s1c}}\hfill
-\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/RIGHT1s1c}}
-\caption{Output of \texttt{RIGHT1s1c} (pages 4--11)}\label{RIGHT1s1c}
-\fi
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/after1s1c}}
+
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/after1s1c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/after1s1c}}
+\caption{Output of \texttt{after1s1c} (pages 2--9)}\label{after1s1c}
 \end{figure}
 
 
-\iffalse
-\begin{figure}[!htb]
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/right2s1c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/right2s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/right2s1c}}
-\caption{Output of \texttt{right2s1c} (twoside pages 2--9)}\label{right2s1c}
-\end{figure}
-\fi
-
-
-
-\FloatBarrier
-
-
+%\FloatBarrier
 
+\clearpage
 
 \subsubsection{Using \Lkeyset{capPos=evenPage} --- caption on an even page}
 
@@ -1514,23 +1494,12 @@ This option makes only real sense for The \Loption{twoside} mode!
 \begin{lstlisting}
 \hvFloat[fullpage, capPos=evenPage]%
   {figure}%
-  {\includegraphics[fullpage]{frose}}%
+  {\includegraphics[fullpage]{images/frose}}%
   [A float whith a caption on an even page (left)]%
   {A caption on an even (left) page of a ``fullpage'' object.. \blindtext}
   {fig:fullpage3}
 \end{lstlisting}
 
-\iffalse
-\Float[capPos=evenPage]
-\hvFloat[fullpage, capPos=evenPage]%
-  {figure}%
-  {\includegraphics[fullpage]{frose}}%
-  [A float whith a caption on an even page (left)]%
-  {A caption on an even (left) page of a ``fullpage'' object.. \blindtext}
-  {fig:fullpage3}
-\fi
-
-
 
 \begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/even1s1c}}\hfill
@@ -1544,23 +1513,11 @@ This option makes only real sense for The \Loption{twoside} mode!
 \frame{\includegraphics[page=9,width=0.24\linewidth]{examples/even1s1c}}
 \caption{Output of \texttt{even1s1c} (pages 2--9)}\label{fig:fullpage6}
 
-\iffalse
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/even2s1c}}
-
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/even2s1c}}\hfill
-\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/even2s1c}}
-\caption{Output of \texttt{even2s1c} (pages 4--11)}\label{fig:fullpage8}
-\fi
-
 \end{figure}
 
 
-\FloatBarrier
+%\FloatBarrier
+\clearpage
 
 
 \subsubsection{Using \Lkeyset{capPos=oddPage} --- caption on an odd page}
@@ -1573,7 +1530,7 @@ which is before the caption.
 \begin{lstlisting}
 \hvFloat[fullpage, capPos=oddPage]%
   {figure}%
-  {\includegraphics[fullpage]{frose}}%
+  {\includegraphics[fullpage]{images/frose}}%
   [A float which needs the complete page width and height.]%
   {A Caption on an odd page of a ``fullpage'' object, which follows on the next page. 
    This can be an even or odd page. And some more text whch has no
@@ -1583,19 +1540,6 @@ which is before the caption.
 
 
 
-\iffalse
-\Float[capPos=oddPage]
-\hvFloat[fullpage, capPos=oddPage]%
-  {figure}%
-  {\includegraphics[fullpage]{frose}}%
-  [A float which needs the complete page width and height.]%
-  {A Caption on an odd page of a ``fullpage'' object, which follows on the next page. 
-   This can be an even or odd page. And some more text whch has no
-   real meaning because it fills only the space for a long caption.}%
-  {fig:fullpage2}
-
-\fi
-
 \begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/odd1s1c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/odd1s1c}}\hfill
@@ -1609,24 +1553,8 @@ which is before the caption.
 \caption{Output of \texttt{odd1s1c} (pages 2--9)}\label{fig:fullpage10}
 \end{figure}
 
-
 \iffalse
-\begin{figure}[p]
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/odd1s2c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/odd1s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/odd1s2c}}
-%\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/odd1s2c}}
-\caption{Output of \texttt{odd1s2c} (pages 2--9)}\label{fig:fullpage11}
-%\end{figure}
-
-
-%\begin{figure}
+\begin{figure}
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/odd2s1c}}\hfill
 \frame{\includegraphics[page=5,width=0.24\linewidth]{examples/odd2s1c}}\hfill
 \frame{\includegraphics[page=6,width=0.24\linewidth]{examples/odd2s1c}}\hfill
@@ -1638,28 +1566,8 @@ which is before the caption.
 \frame{\includegraphics[page=11,width=0.24\linewidth]{examples/odd2s1c}}
 \caption{Output of \texttt{odd2s1c} (pages 4--11)}\label{fig:fullpage12}
 \end{figure}
-
-
-
-
-
-\begin{figure}
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/odd2s2c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/odd2s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/odd2s2c}}
-%\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/odd1s2c}}
-\caption{Output of \texttt{odd2s2c} (pages 2--9)}\label{fig:fullpage13}
-\end{figure}
-
 \fi
 
-
 \FloatBarrier
 
 
@@ -1690,7 +1598,7 @@ the paper dimensions \Ldim{paperwidth} and
 
 
 
-\begin{figure}[p]
+\begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-default1s1c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-default1s1c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-default1s1c}}\hfill
@@ -1701,19 +1609,21 @@ the paper dimensions \Ldim{paperwidth} and
 \frame{\includegraphics[page=8,width=0.24\linewidth]{examples/paper-default1s1c}}\hfill
 \frame{\includegraphics[page=9,width=0.24\linewidth]{examples/paper-default1s1c}}
 %\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/paper-default1s1c}}
-\caption{Output of \texttt{paper-default1s1c} (pages 2--9)}\label{fig:fullpage14}
-
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/paper-right1s1c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/paper-right1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/paper-right1s1c}}
-%\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/paper-right1s1c}}
-\caption{Output of \texttt{paper-right1s1c} (pages 2--9)}\label{fig:fullpage140}
+\caption{Output of \texttt{paper-default1s1c} (pages 2--9)}\label{paper-default1s1c}
+\end{figure}
+
+\begin{figure}[!h]
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/paper-after1s1c}}
+
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/paper-after1s1c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/paper-after1s1c}}
+%\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/paper-after1s1c}}
+\caption{Output of \texttt{paper-after1s1c} (pages 2--9)}\label{paper-after1s1c}
 \end{figure}
 
 
@@ -1741,7 +1651,7 @@ can be mixed:
 \begin{lstlisting}
 \captionsetup{singlelinecheck=false}
 \hvFloat[fullpage,capPos=before,multiFloat]%
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%                   no 1
+  +{figure}{\includegraphics[width=\linewidth]{images/CTAN}}%%                   no 1
    [Short caption A]%
    {A Caption A of a ``fullpage'' object, which follows on the left or
     right column. This can be an even or odd page. And some more text whch has no
@@ -1756,46 +1666,18 @@ can be mixed:
    [Short Caption B]%
    {A Caption B of a ``fullpage'' object, which follows on the left or
         right column. This can be an even or odd page.}{}%
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%                    no 3
+  +{figure}{\includegraphics[width=\linewidth]{images/CTAN}}%%                    no 3
    {A Caption C of a ``fullpage'' object, which follows on the left or
       right column.}%
    {img:demo1}
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%                    no 4
+  +{figure}{\includegraphics[width=\linewidth]{images/CTAN}}%%                    no 4
    {A Caption C of a ``fullpage'' object, which follows on the left or
       right column.}%
    {img:demo2}
 \end{lstlisting}
 
-\iffalse
-\Float[Multi]
-\captionsetup{singlelinecheck=false}
-\hvFloat[fullpage,capPos=before,multiFloat]%
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%  no 1
-   [Short caption A]%
-   {A Caption A of a ``fullpage'' object, which follows on the left or
-    right column. This can be an even or odd page. And some more text whch has no
-    real meaning because it fills only the space for a long caption.}%
-   {img:demo0}%
-  +{table}{\begin{tabular}{lrcp{3cm}}\hline                 %             no 2
-            Linksbündig & Rechtsbündig & Zentriert & Parbox\\\hline
-            L           & R            & C         & P\\
-            left        & right        & center    & Text with possible linebreaks\\
-            \multicolumn{4}{c}{Multicolumn over all columns}\\\hline
-           \end{tabular}}%
-   [Short Caption B]%
-   {A Caption B of a ``fullpage'' object, which follows on the left or
-        right column. This can be an even or odd page.}{}%
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%  no 3
-   {A Caption C of a ``fullpage'' object, which follows on the left or
-      right column.}%
-   {img:demo1}
-  +{figure}{\includegraphics[width=\linewidth]{CTAN}}%%  no 4
-   {A Caption D of a ``fullpage'' object, which follows on the left or
-      right column.}%
-   {img:demo2}
-\fi
 
-\begin{figure}[p]
+\begin{figure}[!h]
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/multi-default1s1c}}\hfill
 \frame{\includegraphics[page=5,width=0.24\linewidth]{examples/multi-default1s1c}}\hfill
 \frame{\includegraphics[page=6,width=0.24\linewidth]{examples/multi-default1s1c}}\hfill
@@ -1806,18 +1688,20 @@ can be mixed:
 \frame{\includegraphics[page=10,width=0.24\linewidth]{examples/multi-default1s1c}}\hfill
 \frame{\includegraphics[page=11,width=0.24\linewidth]{examples/multi-default1s1c}}
 \caption{Output of \texttt{multi-default1s1c} (pages 4--11)}\label{multi-default1s1c}
+\end{figure}
 
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/multi-right1s1c}}
-
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/multi-right1s1c}}\hfill
-\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/multi-right1s1c}}
+\begin{figure}[!h]
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/multi-after1s1c}}
+
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/multi-after1s1c}}\hfill
+\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/multi-after1s1c}}
 %\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/odd1s2c}}
-\caption{Output of \texttt{multi-right1s1c} (pages 4--11)}\label{multi-right1s1c}
+\caption{Output of \texttt{multi-after1s1c} (pages 4--11)}\label{multi-after1s1c}
 \end{figure}
 
 
@@ -1857,17 +1741,17 @@ float type entry is ignored.
         right column. This can be an even or odd page. And some more text whch has no
         real meaning because it fills only the space for a long caption.}%  main caption
    {sub:demo0}%
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
+  +{}{\includegraphics[width=\linewidth]{images/CTAN}}%
    [Short caption B]%
    {A Caption B of a ``fullpage'' sub object.}%  subcaption
    {}%
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
+  +{}{\includegraphics[width=\linewidth]{images/CTAN}}%
    {A Caption C of a ``fullpage'' object, which follows on the left or right column.}%
    {sub:demo1}
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
+  +{}{\includegraphics[width=\linewidth]{images/CTAN}}%
    {A Caption D of a ``fullpage'' object}%
    {sub:demo2}
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
+  +{}{\includegraphics[width=\linewidth]{images/CTAN}}%
    {A Caption E of a ``fullpage'' object}%
    {sub:demo3}
 \end{lstlisting}
@@ -1878,28 +1762,6 @@ The package \Lpack{subcaption} is loaded by default and should be activated with
 \Lcs{captionsetup}\Largs{sub}\Largs{\Lkeyword{singlelinecheck}}.
 
 
-\iffalse
-\captionsetup[sub]{singlelinecheck}
-\hvFloat[fullpage,capPos=before,objectFrame,subFloat]%
-  +{figure}{}[Short main caption of the objects]%   main short lsi entry
-   {The main  caption of a ``fullpage'' object, which follows on the left or
-        right column. This can be an even or odd page. And some more text whch has no
-        real meaning because it fills only the space for a long caption.}%  main caption
-   {sub:demo0}%
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
-   [Short caption B]%
-   {A Caption B of a ``fullpage'' sub object.}%  subcaption
-   {}%
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
-   {A Caption C of a ``fullpage'' object, which follows on the left or right column.}%
-   {sub:demo1}
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
-   {A Caption D of a ``fullpage'' object}%
-   {sub:demo2}
-  +{}{\includegraphics[width=\linewidth]{CTAN}}%
-   {A Caption E of a ``fullpage'' object}%
-   {sub:demo3}
-\fi
 
 \begin{figure}[p]
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/sub-default1s1c}}\hfill
@@ -1913,17 +1775,17 @@ The package \Lpack{subcaption} is loaded by default and should be activated with
 \frame{\includegraphics[page=11,width=0.24\linewidth]{examples/sub-default1s1c}}
 \caption{Output of \texttt{sub-default1s1c} (pages 4--11)}\label{sub-default1s1c}
 
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/sub-right1s1c}}
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/sub-after1s1c}}
 
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/sub-right1s1c}}\hfill
-\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/sub-right1s1c}}
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/sub-after1s1c}}\hfill
+\frame{\includegraphics[page=11,width=0.24\linewidth]{examples/sub-after1s1c}}
 %\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/odd1s2c}}
-\caption{Output of \texttt{sub-right1s1c} (pages 4--11)}\label{sub-right1s1c}
+\caption{Output of \texttt{sub-after1s1c} (pages 4--11)}\label{sub-after1s1c}
 \end{figure}
 
 
@@ -1938,7 +1800,7 @@ The package \Lpack{subcaption} is loaded by default and should be activated with
 %\twocolumn[
 \section{Full page objects in twocolumn mode}%]
 
-The filenames always have a ``2c'' for two columns in its names, e.g. \texttt{default2s2c} 
+The filenames always have a ``2c'' for two columns in its names, e.g. \texttt{left2s2c} 
 indicates \Lkeyset{capPos=before} and the documentclass setting \Loption{twoside} and \Loption{twocolumn}.
 Depending to the
 used documentclass it can be a problem, if the caption should be placed on the first page of the whole document.
@@ -1955,39 +1817,13 @@ For the  \Index{twocolumn} mode the caption can be in the left (first) or right
 With the default setting (without using the keyword \Lkeyword{capPos}) 
 it is  equivalent to the setting \Lkeyset{capPos=before}, the caption is always placed \emph{before} (left of)
 the object. This can be the first or the second column and both can be on different pages.
-With \Lkeyset{capPos=before} (uppercase L) it is possible to get the caption and the object in 
-the twocolumn mode always on one page.
+With \Lkeyset{capPos=before} (uppercase L) it is possible to get the caption and the object in the twocolumn mode always on one page.
 This is then the left (first) column for the caption (see figure~\vref{default2s2c}).
 
 
-\begin{lstlisting}
-\hvFloat[fullpage]{figure}%
-  {\includegraphics[width=\columnwidth,height=0.9\textheight]{frose}}%
-  [A float which needs the complete column width and height.]%
-  {A Caption of a ``fullpage'' object, which follows on the next column. 
-   This is always the right column on an even or odd page. And some more 
-   text whch has no real meaning because it fills only the space for a long 
-   caption.}%
-  {fig:fullpage0-2}
-\end{lstlisting}
-
-
-\iffalse
-\Float[default]
-\hvFloat[fullpage]{figure}%
-  {\includegraphics[width=\columnwidth,height=0.9\textheight]{frose}}%
-  [A float which needs the complete column width and height.]%
-  {A Caption of a ``fullpage'' object, which follows on the next column. 
-   This is always the right column on an even or odd page. And some more 
-   text whch has no real meaning because it fills only the space for a long 
-   caption.}%
-  {fig:fullpage0-2}
-\fi
-
-
 
 
-\begin{figure}[p]
+\begin{figure}[!h]
 %\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/default2s2c}}\hfill
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/default2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/default2s2c}}\hfill
@@ -2002,37 +1838,53 @@ This is then the left (first) column for the caption (see figure~\vref{default2s
 \end{figure}
 
 
-%Figure~\vref{fig:fullpage0-2} shows the behaviour if only the optional argument \Lkeyword{fullpage} 
-%in twocolumn mode is used. With this default setting the caption is always placed \textit{before} the following object. 
+\FloatBarrier
 
-\iffalse
-\begin{figure}[!htbp]
-%\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/LEFT2s2c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/LEFT2s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/LEFT2s2c}}
-\caption{Output of \texttt{LEFT2s2c} (pages 2--9)}\label{LEFT2s2c}
+
+\begin{lstlisting}
+\hvFloat[fullpage]{figure}%
+  {\includegraphics[width=\columnwidth,height=0.9\textheight]{images/frose}}%
+  [A float which needs the complete column width and height.]%
+  {A Caption of a ``fullpage'' object, which follows on the next column. 
+   This is always the right column on an even or odd page. And some more 
+   text whch has no real meaning because it fills only the space for a long 
+   caption.}%
+  {fig:fullpage0-2}
+\end{lstlisting}
+
+
+
+The example~\vref{default2s2c} shows that the caption and the object can be on different
+pages. If you do not like this behaviour, then use the setting \Lkeyset{capPos=left}, which puts
+the caption before the object, but always on the \emph{same page} (see Figure~\vref{left2s2c}).
+
+
+\begin{figure}[!h]
+%\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/right2s2c}}\hfill
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/left2s2c}}
+
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/left2s2c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/left2s2c}}
+\caption{Output of \texttt{left2s2c} (pages 2--9)}\label{left2s2c}
 \end{figure}
 
-\fi
 
-\FloatBarrier
 
 
 \subsubsection{Using \Lkeyset{capPos=after}}
 
-The caption will be printed always right (\textit{after}) of the object. This can be the frist or second
-column.
+The caption will be printed always right of the object which is the same as \textit{after} the full page object.
+With \Lkeyset{capPos=after} it is possible to get the caption in the twocolumn mode always in
+the right (second) column (see figure~\vref{right2s2c})
 
 \begin{lstlisting}
 \hvFloat[fullpage, capPos=after]{figure}%
-  {\includegraphics[fullpage]{rose}}%
+  {\includegraphics[fullpage]{images/rose}}%
   [A float which needs the complete column width and height.]%
   {A Caption of a ``fullpage'' object, which is on the left column. 
    This is always the right column on an even or odd page. And some more 
@@ -2042,18 +1894,25 @@ column.
 \end{lstlisting}
 
 
-\iffalse
-\Float[capPos=after]
-\hvFloat[fullpage, capPos=after]{figure}%
-  {\includegraphics[fullpage]{rose}}%
-  [A float which needs the complete column width and height.]%
-  {A Caption of a ``fullpage'' object, which is on the left column. 
-   This is always the right column on an even or odd page. And some more 
-   text whch has no real meaning because it fills only the space for a long 
-   caption.}%
-  {fig:fullpage1-2}
-\fi
+\begin{figure}[!h]
+%\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/after2s2c}}
+
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/after2s2c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/after2s2c}}
+\caption{Output of \texttt{after2s2c} (pages 2--9)}\label{after2s2c}
+\end{figure}
+
 
+The caption and the object can be on different pages (Figure~\vref{after2s2c}).
+If you do not like this behaviour, then use the setting \Lkeyset{capPos=right} instead
+of \Lkeyset{capPos=after}. Figure~{right2s2c} shows that caption and object in this case
+are always on the same page.
 
 \begin{figure}[!h]
 %\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/right2s2c}}\hfill
@@ -2069,27 +1928,9 @@ column.
 \caption{Output of \texttt{right2s2c} (pages 2--9)}\label{right2s2c}
 \end{figure}
 
-\iffalse
-%\begin{figure}%[p]
-%\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/RIGHT2s2c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/RIGHT2s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/RIGHT2s2c}}
-\caption{Output of \texttt{RIGHT2s2c} (pages 2--9)}\label{RIGHT2s2c}
-\end{figure}
-
-\fi
-
-
-\FloatBarrier
-
+%\FloatBarrier
 
+\clearpage%%%%%%%%%%%%%%%%%%%%%%%%%
 
 
 \subsubsection{Using \Lkeyset{capPos=evenPage} --- caption on an even page}
@@ -2115,7 +1956,7 @@ of \Lpack{hvfloat}.
 \caption{Output of \texttt{even1s2c} (pages 2--9)}\label{even1s2c}
 \fi
 
-\begin{figure}[!h]
+\begin{figure}
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/even2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/even2s2c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/even2s2c}}\hfill
@@ -2158,7 +1999,7 @@ of \Lpack{hvfloat}.
 \caption{Output of \texttt{odd1s2c} (pages 2--9)}\label{odd1sc2}
 \fi
 
-\begin{figure}[!h]
+\begin{figure}
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/odd2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/odd2s2c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/odd2s2c}}\hfill
@@ -2186,7 +2027,7 @@ in the left column for an odd page.
 
 
 \begin{lstlisting}
-\hvFloat[fullpage,capPos=inner]{figure}{\includegraphics[fullpage]{rose}}%
+\hvFloat[fullpage,capPos=inner]{figure}{\includegraphics[fullpage]{images/rose}}%
   [A float which needs the complete column width and height.]%
   {A Caption of a ``fullpage'' object, which follows on the left or right column. 
    This can be an even or odd page. And some more text whch has no
@@ -2196,7 +2037,7 @@ in the left column for an odd page.
 \iffalse
 \Float[capPos=inner]
 \hvFloat[fullpage,capPos=inner]{figure}%
-  {\includegraphics[fullpage]{rose}}%
+  {\includegraphics[fullpage]{images/rose}}%
   [A float which needs the complete column width and height.]%
   {A Caption of a ``fullpage'' object, which follows on the left or
    right column. 
@@ -2205,7 +2046,7 @@ in the left column for an odd page.
 \fi
 
 
-\begin{figure}[!h]
+\begin{figure}
 %\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/inner1s2c}}\hfill
 %\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/inner1s2c}}\hfill
 %\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/inner1s2c}}\hfill
@@ -2244,7 +2085,7 @@ or after this caption.
 
 \begin{lstlisting}
 \hvFloat[fullpage, capPos=outer]{figure}%
-  {\includegraphics[fullpage]{rose}}%
+  {\includegraphics[fullpage]{images/rose}}%
   [A float which needs the complete page width and height with \texttt{capPos=outer}.]%
   {A Caption of a ``fullpage'' object, which has the caption position in the
    outer page. This can be an even or odd page. And some more text whch has no
@@ -2254,7 +2095,7 @@ or after this caption.
 \iffalse
 \Float[capPos=outer]
 \hvFloat[fullpage, capPos=outer]{figure}%
-  {\includegraphics[fullpage]{rose}}%
+  {\includegraphics[fullpage]{images/rose}}%
   [A float which needs the complete page width and height with \texttt{capPos=outer}.]%
   {A Caption of a ``fullpage'' object, which has the caption position in the
    outer page. This can be an even or odd page. And some more text whch has no
@@ -2264,7 +2105,7 @@ or after this caption.
 
 
 
-\begin{figure}[!h]
+\begin{figure}
 %\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/outer1s2c}}\hfill
 %\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/outer1s2c}}\hfill
 %\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/outer1s2c}}\hfill
@@ -2298,15 +2139,15 @@ or after this caption.
 \clearpage
 
 
-\subsection{Using full page in twocolumn mode}
+\subsection{Using full page in twocolumn mode}\label{star-version}
 
 With the star version of \Lcs{hvfloat} The object ist placed over both columns, the whole page.
 In such a case the only useful caption position is \Lkeyset{capPos=inner} for \emph{inner}.
 
 
 \begin{lstlisting}
-\hvFloat*[fullpage]{figure}%
-  {\includegraphics[FullPage]{rose}}%
+\hvFloat*[fullpage, capPos=inner]{figure}%
+  {\includegraphics[FullPage]{images/rose}}%
   [A float which needs the complete page width and height with \texttt{capPos=outer}.]%
   {A caption of a ``fullpage'' object in twocolumn mode: It uses the star version
   of \textbackslash hvFloat. The object goes over both columns.}{fig:two}
@@ -2315,7 +2156,7 @@ In such a case the only useful caption position is \Lkeyset{capPos=inner} for \e
 \iffalse
 \Float[capPos=inner]
 \hvFloat*[fullpage, capPos=inner]{figure}%
-  {\includegraphics[FullPage]{rose}}%
+  {\includegraphics[FullPage]{images/rose}}%
   [Star version with \texttt{capPos=outer}.]%
   {A caption of a ``fullpage'' object in twocolumn mode: It uses the star version
   of \textbackslash hvFloat. The object goes over both columns.}{fig:two}
@@ -2323,7 +2164,7 @@ In such a case the only useful caption position is \Lkeyset{capPos=inner} for \e
 \fi
 
 
-\begin{figure}[!h]
+\begin{figure}
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-default2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-default2s2c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-default2s2c}}\hfill
@@ -2338,32 +2179,7 @@ In such a case the only useful caption position is \Lkeyset{capPos=inner} for \e
 \caption{Output of \texttt{paper-default2s2c} (pages 2--9)}\label{paper-default2s2c}
 \end{figure}
 
-\begin{figure}[!h]
-%\frame{\includegraphics[page=1,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/paper-LEFT1s2c}}
-
-%\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/paper-LEFT1s2c}}\hfill
-%\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/paper-LEFT1s2c}}
-%\caption{Output of \texttt{paper-LEFT2s2c} (pages 2--9)}\label{paper-LEFT2s2c}
-
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/paper-right2s2c}}
-
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/paper-right2s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/paper-right2s2c}}
-\caption{Output of \texttt{paper-right2s2c} (pages 2--9)}\label{paper-right2s2c}
-\end{figure}
-%
-%
+
 \begin{figure}
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/paper-inner2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/paper-inner2s2c}}\hfill
@@ -2395,7 +2211,7 @@ can be mixed:
 \begin{lstlisting}
 \captionsetup{singlelinecheck=false}
 \hvFloat[fullpage,multiFloat,capPos=inner]%
-  +{figure}{\includegraphics[height=0.4\textheight]{rose}}%%  no 1
+  +{figure}{\includegraphics[height=0.4\textheight]{images/rose}}%%  no 1
    [Short caption A]%
    {A Caption A of a ``fullpage'' object, which follows on the left or
     right column. This can be an even or odd page. And some more text whch has no
@@ -2411,7 +2227,7 @@ can be mixed:
    {A Caption B of a ``fullpage'' object, which follows on the left or
         right column. This can be an even or odd page.}%
    {}%
-  +{figure}{\includegraphics[height=0.4\textheight]{rose}}%%  no 3
+  +{figure}{\includegraphics[height=0.4\textheight]{images/rose}}%%  no 3
    {A Caption C of a ``fullpage'' object, which follows on the left or
       right column.}%
    {multi:demo1}
@@ -2423,7 +2239,7 @@ can be mixed:
 \Float[Multi]
 \captionsetup{singlelinecheck=false}
 \hvFloat[fullpage,multiFloat,capPos=inner]%
-  +{figure}{\includegraphics[height=0.4\textheight]{rose}}%%  no 1
+  +{figure}{\includegraphics[height=0.4\textheight]{images/rose}}%%  no 1
    [Short caption A]%
    {A Caption A of a ``fullpage'' object, which follows on the left or
     right column. This can be an even or odd page. And some more text whch has no
@@ -2438,7 +2254,7 @@ can be mixed:
    [Short Caption B]%
    {A Caption B of a ``fullpage'' object, which follows on the left or
         right column. This can be an even or odd page.}{}%
-  +{figure}{\includegraphics[height=0.4\textheight]{rose}}%%  no 3
+  +{figure}{\includegraphics[height=0.4\textheight]{images/rose}}%%  no 3
    {A Caption C of a ``fullpage'' object, which follows on the left or
       right column.}%
    {multi:demo1}
@@ -2452,7 +2268,7 @@ left aligned.
 
 
 
-\begin{figure}[p]
+\begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/multi-default2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/multi-default2s2c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/multi-default2s2c}}\hfill
@@ -2464,9 +2280,9 @@ left aligned.
 \frame{\includegraphics[page=9,width=0.24\linewidth]{examples/multi-default2s2c}}
 %\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/multi-default2s2c}}
 \caption{Output of \texttt{multi-default2s2c} (pages 2-9)}\label{multi-defaults2s2c}
-%\end{figure}
+\end{figure}
 
-%\begin{figure}[!h]
+\begin{figure}[!h]
 \frame{\includegraphics[page=2,width=0.24\linewidth]{examples/multi-inner2s2c}}\hfill
 \frame{\includegraphics[page=3,width=0.24\linewidth]{examples/multi-inner2s2c}}\hfill
 \frame{\includegraphics[page=4,width=0.24\linewidth]{examples/multi-inner2s2c}}\hfill
@@ -2481,7 +2297,6 @@ left aligned.
 \end{figure}
 
 
-\clearpage
 
 \section{Subfloat page}
 A subfloat page can have only one type of floats which will have one main caption and
@@ -2490,6 +2305,7 @@ Some arguments are ignored for a subfloat, one can leave them empty. The first l
 the object entry is ignored! All aditional lines will have the same float type, the reason why the
 float type entry is ignored.
 
+\enlargethispage{\normalbaselineskip}
 
 \begin{lstlisting}
 \captionsetup[sub]{singlelinecheck}
@@ -2499,14 +2315,14 @@ float type entry is ignored.
         right column. This can be an even or odd page. And some more text whch has no
         real meaning because it fills only the space for a long caption.}%  main caption
    {sub:demo00}%
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    [Short caption B]%
    {A Caption B of a ``fullpage'' sub object.}%  subcaption
    {}%
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    {A Caption C of a ``fullpage'' object, which follows on the left or right column.}%
    {sub:demo10}
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    {A Caption D of a ``fullpage'' object}%
    {sub:demo20}
 \end{lstlisting}
@@ -2525,15 +2341,15 @@ should be true (see listing).
         right column. This can be an even or odd page. And some more text whch has no
         real meaning because it fills only the space for a long caption.}%
    {sub:demo00}%
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    [Short caption B]%
    {A Caption B of a ``fullpage'' sub object.}%
    {}%
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    {A Caption C of a ``fullpage'' object, which follows on the left or
       right column.}%
    {sub:demo10}
-  +{}{\includegraphics[height=0.28\textheight]{rose}}%
+  +{}{\includegraphics[height=0.28\textheight]{images/rose}}%
    {A Caption D of a ``fullpage'' object}%
    {sub:demo20}
 \fi
@@ -2552,17 +2368,17 @@ should be true (see listing).
 \frame{\includegraphics[page=9,width=0.24\linewidth]{examples/sub-default2s2c}}
 \caption{Output of \texttt{sub-default2s2c} (pages 2--9)}\label{sub-default2s2c}
 
-\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/sub-right2s2c}}
+\frame{\includegraphics[page=2,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=3,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=4,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=5,width=0.24\linewidth]{examples/sub-after2s2c}}
 
-\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/sub-right2s2c}}\hfill
-\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/sub-right2s2c}}
+\frame{\includegraphics[page=6,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=7,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=8,width=0.24\linewidth]{examples/sub-after2s2c}}\hfill
+\frame{\includegraphics[page=9,width=0.24\linewidth]{examples/sub-after2s2c}}
 %\frame{\includegraphics[page=10,width=0.24\linewidth]{examples/odd2s2c}}
-\caption{Output of \texttt{sub-right2s2c} (pages 2--9)}\label{sub-right2s2c}
+\caption{Output of \texttt{sub-after2s2c} (pages 2--9)}\label{sub-after2s2c}
 \end{figure}
 
 
@@ -2585,7 +2401,7 @@ the object is set. Let's assume that we use something like
 \begin{verbatim}
 \setDefaults
 \hvFloat[fullpage,capPos=evenPage]{figure}%
-  {\IncludeGraphics{frose}}%
+  {\IncludeGraphics{images/frose}}%
   [A float which needs the complete paper width and height.]%
   {A Caption of a ``fullpage'' object, which follows on the next page. 
    This can be an even or odd page. The object uses the complete paper dimensions}%
@@ -2623,21 +2439,8 @@ pagenumber which is~\vpageref{demo:fullpage-cap}.
 The figure~\ref{demo:fullpage} is on page~\pageref{demo:fullpage}
 and the caption on page~\pageref{demo:fullpage-cap}
 
-\blindtext
-
-
-\setDefaults
-\hvFloat[FULLPAGE,capPos=after]{figure}%
-  {\includegraphics[FULLPAGE]{frose}}%
-  [A float which needs the complete paper width and height.]%
-  {A Caption of a ``FULLPAGE'' object, which follows on the next page. 
-   This can be an even or odd page. The object uses the complete paper dimensions}%
-  {demo:fullpage}
-
-
-\blindtext
-
 
+\FloatBarrier
 
 \section{Defining a style}
 
@@ -2654,7 +2457,7 @@ For example:
 
 
 \begin{lstlisting}
-\hvFloat[style=RightCaption]{figure}{\includegraphics[scale=1.5]{frose}}%
+\hvFloat[style=RightCaption]{figure}{\includegraphics{images/rose}}%
   {Caption vertically centered right beside the float with a caption width of 
    \texttt{0.5\textbackslash columnwidth}.}{fig:style}
 \end{lstlisting}
@@ -2662,25 +2465,11 @@ For example:
 \defhvstyle{RightCaption}{floatPos=htb, capWidth=0.5, capPos=after, capVPos=bottom, objectPos=center}
 
 
-\hvFloat[style=RightCaption]{figure}{\includegraphics[scale=1.5]{frose}}%
+\hvFloat[style=RightCaption]{figure}{\includegraphics{images/rose}}%
   {Caption at bottom right beside the float with a caption width of 
    \texttt{0.5\textbackslash columnwidth}.}{fig:style}
 
 
-A defined style is internally saved in a macro named \texttt{hv@<style name>}. For the defined
-style \Lkeyval{RightCaption} it is \Lcs{hv"@RightCaption}. Using this macro shows it's definition:
-
-\begin{verbatim}
-\makeatletter
-\hv@RightCaption
-\makeatother 
-\end{verbatim}
-
-\makeatletter
-\hv@RightCaption
-\makeatother 
-
-
 
 \section{Global float setting}
 Instead of writing the following sequence into the preamble:
@@ -2692,22 +2481,28 @@ Instead of writing the following sequence into the preamble:
 \makeatother 
 \end{verbatim}
 
-you can change the global setting of floats by loading the package \Lpack{hvfloat-fps} (fps: float
-placement setting). It allows with
-optional package arguments to set the global placement:
+you can change the global setting of floats by loading the package \Lpack{hvfloat-fps}. It allows 
+optional package options to set the global placement:
 
 
 \begin{verbatim}
 \usepackage[figure=tb,table=t]{hvfloat-fps}
-\usepackage[all=!htb]{hvfloat-fps}
 \end{verbatim}
 
-
 \blindtext
 
+\blindtext
 
+%\setDefaults
+\hvFloat[FULLPAGE]{figure}%
+  {\includegraphics[FULLPAGE]{images/frose}}%
+  [A float which needs the complete paper width and height.]%
+  {A Caption of a ``fullpage'' object, which follows on the next page. 
+   This can be an even or odd page. The object uses the complete paper dimensions}%
+  {demo:fullpage}
 
 
+\Blindtext
 
 \printindex
 
@@ -2724,7 +2519,7 @@ optional package arguments to set the global placement:
 
 
 \section{The Package Source}
-\lstinputlisting[basicstyle=\ttfamily\footnotesize,tabsize=3]{hvfloat.sty}
+\lstinputlisting[basicstyle=\ttfamily\footnotesize,tabsize=3,numbers=left,numberstyle=\tiny]{hvfloat.sty}
 
 
 \end{document} 
-- 
cgit v1.2.3

