From 50d02ff405a42c546de67a95c3031231aa1fcf39 Mon Sep 17 00:00:00 2001 From: Norbert Preining Date: Sun, 2 Dec 2012 23:59:34 +0000 Subject: cweb-latex half-update fixing cweb.cls (needs patching) and location of cwebbase.tex (wrongly installed as doc file) git-svn-id: svn://tug.org/texlive/trunk@28426 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/latex/cweb-latex/Makefile | 79 + .../texmf-dist/doc/latex/cweb-latex/cwebbase.tex | 2080 -------------------- 2 files changed, 79 insertions(+), 2080 deletions(-) create mode 100644 Master/texmf-dist/doc/latex/cweb-latex/Makefile delete mode 100644 Master/texmf-dist/doc/latex/cweb-latex/cwebbase.tex (limited to 'Master/texmf-dist/doc/latex/cweb-latex') diff --git a/Master/texmf-dist/doc/latex/cweb-latex/Makefile b/Master/texmf-dist/doc/latex/cweb-latex/Makefile new file mode 100644 index 00000000000..a280ae7cd99 --- /dev/null +++ b/Master/texmf-dist/doc/latex/cweb-latex/Makefile @@ -0,0 +1,79 @@ +# $Id: Makefile,v 1.5 1995/11/21 00:41:49 schrod Exp $ +#---------------------------------------------------------------------- + +default:: install + + +# +# installation +# + +# root of TDS compliant installation + + TEXMF = /usr/local/lib/texmf + +# Comment it out if you don't want to install contributed packages. +# (Not recommended.) + + INSTALL_CONTRIB = install-contrib + +# installation target directories +# (No need to change here for TDS installations.) + + LATEX = $(TEXMF)/tex/latex + CWEB = $(LATEX)/cweb + + LATEX_DOC = $(TEXMF)/doc/latex + CWEB_DOC = styles/cweb + + +# installation actions + +.PHONY: install install-cweb-sty install-contrib + +install:: install-cweb-sty $(INSTALL_CONTRIB) + +install-cweb-sty:: $(LATEX) $(LATEX_DOC) + test -d $(CWEB) || mkdir $(CWEB) + cp *.sty *.cls $(CWEB) + cd $(LATEX_DOC) ; \ + if [ ! -d $(CWEB_DOC) ] ; \ + then d=`echo $(CWEB_DOC) | sed 's:/.*::'` ; \ + test -d $$d || mkdir $$d ; \ + test -d $(CWEB_DOC) || mkdir $(CWEB_DOC) ; \ + fi + cp *.dvi $(LATEX_DOC)/$(CWEB_DOC) + +install-contrib:: + cp contrib/*.sty $(CWEB) + : cp contrib/*.dvi $(CWEB_DOC) + +$(LATEX): + @echo "You don't have a LaTeX styles directory (tree)." >&2 + @exit 1 + +$(LATEX_DOC): + @echo "You don't have a LaTeX documentation directory (tree)." >&2 + @exit 1 + + +# +# management tasks +# + +.PHONY: distrib collect pack + +distrib:: collect pack + +pack:: + cp $(HOME)/Notes/Copying.gpl License + pwd=`pwd` ; pwd=`suffix $$pwd /` ; cd .. ; \ + gtar -czvf $$pwd.tar.gz \ + --exclude=CVS --exclude=.cvsignore --exclude=.rcsrc $$pwd ; \ + cp $$pwd/README $$pwd.README + /bin/rm -f License + +collect:: + cd src ; imkmf ; make distrib + cd examples ; make distrib + : 'cd contrib ; make distrib' diff --git a/Master/texmf-dist/doc/latex/cweb-latex/cwebbase.tex b/Master/texmf-dist/doc/latex/cweb-latex/cwebbase.tex deleted file mode 100644 index dff1d3494b9..00000000000 --- a/Master/texmf-dist/doc/latex/cweb-latex/cwebbase.tex +++ /dev/null @@ -1,2080 +0,0 @@ -% $StyleId: cwebbase.doc,v 1.4 1995/11/07 17:55:19 schrod Exp $ -%---------------------------------------------------------------------- -% Written by Joachim Schrod . -% Copyright conditions see below (GPL). - -% -% LaTeX macros cwebbase -% support for incorporation of CWEAVE markup in LaTeX documents -% -% [LaTeX in MAKEPROG] -% (history at end) - - - - -%%%% -%%%% -%%%% These TeX macros were documented with the documentation system -%%%% MAKEPROG and automatically converted to the current form. -%%%% If you have MAKEPROG available you may transform it back to -%%%% the original input: Remove every occurence of three percents -%%%% and one optional blank from the beginning of a line and remove -%%%% every line which starts with four percents. The following lex -%%%% program will do this: -%%%% -%%%% %% -%%%% -%%%% ^%%%\ ? ; -%%%% ^%%%%.*\n ; -%%%% -%%%% If you just want to print the documentation you may fetch -%%%% the archive print-makeprog.tar.Z from ftp.th-darmstadt.de (directory -%%%% pub/tex/latex). It contains *all* used styles -- but beware, they -%%%% may not be in a documented form... -%%%% -%%%% -%%% \documentclass{progltx} - -%%% \usepackage{cweb-doc} % document-specific markup -%%% \usepackage{fullpage} - - -%%% \RCS $StyleRevision: 1.4 $ -%%% \RCS $StyleDate: 1995/11/07 17:55:19 $ - - -%%% \begin{document} - - -%%% \title{Typesetting \cweave{} Output} -%%% \author{% % LaTeX does not discard unnecessary glue... -%%% Joachim Schrod% -%%% \thanks{% -%%% \protect\raggedright -%%% TU~Darmstadt, Computer Science Department, WG Systems Programming, -%%% Alexanderstr.~10, D-64283~Darmstadt, Germany. -%%% Email: \texttt{schrod@iti.informatik.th-darmstadt.de}.% -%%% }% -%%% } -%%% \date{% -%%% Revision \RCSStyleRevision\\ -%%% (as of \RCSStyleDate)% -%%% } - -%%% \maketitle - - -%%% % doesn't work with progltx yet -%%% %\tableofcontents - - - - -%%% \chap Introduction. - -%%% This code shall interpret and render the tag set output by \cweave{}. -%%% That's realized in this module as it's needed in multiple places -- -%%% when we want to use \LaTeX{} markup in \cweb{}, when we want to -%%% incorporate \cweb{} pieces in \LaTeX{} documents (as examples, or in -%%% textbooks), and when we want to incorporate whole \cweb{} documents in -%%% a \LaTeX{} document. (That's by far the most difficult task.) - -%%% As \cweb{} operates in modes, for obvious reasons our implementation -%%% is based on a finite state automaton (FSA). The whole tag set is -%%% separated into subsets that are valid in certain states. - -%%% The complete set of tags does not obey any name conventions, some tags -%%% are even in conflict with standard \LaTeX{} tags (e.g.\ |\\|). Most -%%% tags are used to render code pieces. With the introduction of states -%%% we can restrict the visibilities of these tags to those states where -%%% we typeset program parts. The needed functionality will be available -%%% in cseqs of our namespace, we'll map that to \cweave{}'s names in a -%%% group. - -%%% Then we have to implement the rendering of chunks and sections, that's -%%% (more or less) a straight-forward task. Actually, we only set up the -%%% basic code pieces, the integration of section divisions in the actual -%%% \LaTeX{} document is a task of higher-level code; that integration -%%% depends heavily on the type of document. That also implies that we -%%% won't implement front or back matter material (document markup, table -%%% of contents, index, list of refinements, etc.)\ in this module. - - -%%% \sect Let's identify this module. - -%%% \noindent The code below is explained in the implementation -%%% documentation of the \pkg{rcs} package. - -%%% \beginprog -\begingroup - \def\RCSFile#1#2 $#3: #4 #5\endRCS $#6: #7 #8\endRCS{% - \def\date{#4}\def\id{v#7}% - \ProvidesFile{#1}[\date\space\id\space #2]% - } - - \RCSFile{cwebbase.tex}{CWEAVE tags for LaTeX markup} - $StyleDate: 1995/11/07 17:55:19 $: 9999/00/00 \endRCS - $StyleRevision: 1.4 $: 0.0 \endRCS -\endgroup -%%% \endprog - - -%%% \sect This module is part of the supported \textsl{cweb-sty} bundle. -%%% Send bug reports, comments and repairs. - -%%% It assumes that the canonical setup of my modules has happened and can -%%% be used herein. (In particular, the underscore is a letter.) - - -%%% \sect This module reserves the namespace |cwbb|. It assumes that -%%% |\cweb_warning| is bound either to |\PackageWarningNoLine| or -%%% |\ClassWarningNoLine|, depending on the environment. - -%%% \beginprog -\ifx \cwbb@loaded\undefined - \def\cwbb@loaded{$StyleRevision: 1.4 $} -\else - \cweb_warning{cwebbase}% - {Some other package already uses namespace `cwbb'} -\fi -%%% \endprog - - -%%% \sect This is freely distributable software; you can redistribute it -%%% and/or modify it under the terms of the GNU General Public License as -%%% published by the Free Software Foundation; either version~2 of the -%%% License, or (at your option) any later version. - -%%% This software is distributed in the hope that it will be useful, but -%%% \textbf{without any warranty}; without even the implied warranty of -%%% \textbf{merchantability} or \textbf{fitness for a particular purpose}. -%%% See the GNU General Public License for more details. - -%%% You should have received a copy of the GNU General Public License in -%%% the file |License| along with this package; if not, write to the Free -%%% Software Foundation, Inc., 675~Mass Ave, Cambridge, MA~02139,~USA. - - - - -%%% % ------------------------------------------------------------ -%%% % -%%% % subdocument: The interface between CWEAVE and TeX -%%% % - -%%% \input{cweave-spec} - -%%% % -%%% % ------------------------------------------------------------ - - - - -%%% \chap Interface of \pkg{cwebbase} module. - -%%% \pkg{cwebbase} implements most of \cweave{} tags. It sets up tons of -%%% redefinable cseqs, all of them start with |Cweb|. -%%% % -%%% \begin{fixme} -%%% How do I document them? We need a configuration document anyhow. Do -%%% I present here just a list of those cseqs realized in this module -%%% and refer to the config docs? Need to wait until I have it, then -%%% we'll see how the stuff here will be added. -%%% \end{fixme} - - -%%% \sect This module supports both hierarchic and flat section -%%% structuring. You have to bind |\cweb@structure| to 0 (hierarchic) or 1 -%%% (flat) before importing it, to show which structure is wanted. - - -%%% \sect This module supports suppression of different document parts. -%%% You have to define flags |@cweb@suppress@|\|@| with -%%% $\mbox{\} \in \{ |changehints|, |unchanged|, |format| \}$ to -%%% denote if suppression shall happen. - - -%%% \sect The counter |secnumdepth| must be~11 if chunks shall be -%%% numbered. That counter doesn't need to be set when this module is -%%% imported, it can be set locally during typesetting \cweb{} code. - -%%% The definitions for flat structure assume that |secnumdepth| is~11 -%%% during typesetting. - - -%%% \sect |\part|, |\chapter| (if available), and |\section| are used for -%%% \cweb{} section divisions (those with the lowest ranks). These -%%% commands will change the respective counters globally and will -%%% add toc lines and marks. You might want to prevent that by redefining -%%% |\addcontentsline| and |\mark|. - -%%% Table of contents macros are not defined for the section divisions -%%% introduced by this module. You must either prevent that they are -%%% written to the |AUX| file at all; or you must define them. -%%% % -%%% \begin{fixme} -%%% Add explanation of introduced section divisions. -%%% \end{fixme} - -%%% For flat structure, all section divisions are of type `|chunk|', like -%%% chunks. The section names start with `|\cwbbRank{|\|}|'. By -%%% default, |\cwbbRank| takes one argument and expands to the empty list -%%% -- this can be redefined for the table of contents. - - -%%% \sect The document end, as explained in the \cweave{} interface specs -%%% (chunk~\ref{spec:sec:docend}), is not implemented. That must be done -%%% by the user of this module -- if the back matter is to be processed at -%%% all. - - - - -%%% \chap Processing states. - -%%% We have to typeset five different categories of material: -%%% Documentation, program pieces---embedded within the documentation and -%%% as large chunks, \TeX{} material within program pieces (i.e., comments -%%% and refinement names), and cross reference information. Since we need -%%% a complete other environment for the program pieces than for the rest -%%% we design ``states'' where we switch to appropriately. -%%% % -%%% \begin{enumerate} - -%%% \item A chunk starts in the \textsl{documentation state}. - -%%% \item |\B| switches to \textsl{program state}. This can happen in -%%% documentation and program state. - -%%% \item While we process the argument of |\PB| we're in \textsl{restricted -%%% program state}; |\PB| may appear in documentation and in \TeX{} -%%% state. Since \TeX{} state can be switched on within restricted -%%% program state, |\PB| can appear within the argument of itself. - -%%% \item In the arguments of |\C|, |\SHC|, and |\X| we switch to -%%% \textsl{\TeX{} state}. All these cseqs appear only in (restricted) -%%% program state, their official names are actually different. I.e., only -%%% in (restricted) program state these cseq are bound to the meaning -%%% described here. - -%%% \item Cross reference information are attached to most chunks with -%%% refinements. This information is processed in \textsl{CR state}. -%%% After CR state material -%%% comes always the next chunk or the document end, i.e., material in -%%% documentation state. - -%%% \end{enumerate} -%%% % -%%% This FSA is illustrated by the diagram in figure~\ref{fig:fsa}. - -%%% \begin{figure} - -%%% \begin{center} -%%% \chardef\\=`\\ -%%% \input{cweb-fsa.latex} -%%% \end{center} - -%%% \caption{The processing state's FSA. The automaton starts and ends in -%%% the ``documentation'' state.} -%%% \label{fig:fsa} - -%%% \end{figure} - -%%% |\cwbb@documentation| will switch to documentation state, -%%% |\cwbb@program| to program state, |\cwbb@Rprogram| to restricted -%%% program state, |\cwbb@tex| to \TeX{} state, and |\cwbb@CR| to CR state. -%%% If we're already in a state, the switch to this state shall be a -%%% permissible null operation. - - -%%% \sect The basic difference between these states can be named with -%%% two parameters: (1)~The cseq bindings in effect and (2)~the layout -%%% parameters used for paragraph makeup. - -%%% In (restricted) program state and in CR state the text is output -%%% under the control of \cweave{}, and tagged by \cweave{}. The used -%%% tags are from a global namespace and should only be in effect during -%%% these states. We call this tag set the \textsl{\cweave{} bindings}. In the -%%% other two states the tags are largely defined by the user, the tag -%%% set is called the \textsl{user bindings}. The switch to another binding -%%% is always done locally, i.e., if we switch from documentation to -%%% restricted program state within a group we don't have to bother about -%%% the restauration of the user binding; it will be done automatically -%%% by \TeX{} at the end of the group. Nevertheless we must be able to -%%% switch from the \cweave{} bindings back to the user bindings which -%%% were in effect when we activated the \cweave{} bindings. This is -%%% needed for the \TeX{} state which is always activated within -%%% (restricted) program state. - -%%% The parameters for \textsl{program layout} are really special ones -%%% since they need to support the indentation which shows the program -%%% structure. These parameters are used in program and in \TeX{} state. -%%% The \textsl{document layout} parameters established by the user are -%%% used in the other three states. - -%%% The following table shall summarize this. $C$~denotes \cweave{} -%%% bindings, $U$~user bindings, $P$~program layout, and $D$~document -%%% layout. If an entry is empty, its value is not changed on entry in -%%% this state. -%%% % -%%% \begin{center} -%%% \DeleteShortVerb\| -%%% \begin{tabular}{r|c|c} -%%% \multicolumn1{c|}{\textsc{State}} & \textsc{Binding} & \textsc{Layout} \\[1pt] -%%% \hline -%%% documentation & $U$ & $D$ \\ -%%% program & $C$ & $P$ \\ -%%% restricted program & $C$ & \\ -%%% \TeX{} & $U$ & \\ -%%% CR & $C$ & $D$ \\ -%%% \end{tabular} -%%% \MakeShortVerb\| -%%% \end{center} - - -%%% \sect Since the user bindings and the document layout is defined -%%% initially, we don't have to do anything if it's requested. Only if we -%%% change it, i.e., within |\cwbb@cweave_bindings| and -%%% |\cwbb@program_layout|, we redefine |\cwbb@user_bindings| and -%%% |\cwbb@doc_layout|. If they are eventually executed, they shall -%%% rebind themselves back to |\relax|. This way we can switch to -%%% documentation state as often as we want. - -%%% \beginprog -\let\cwbb@user_bindings=\relax -\let\cwbb@doc_layout=\relax - -\def\cwbb@documentation{% - \cwbb@user_bindings - \cwbb@doc_layout - } -\def\cwbb@Rprogram{\cwbb@cweave_bindings} - -\def\cwbb@program{% - \cwbb@cweave_bindings - \cwbb@program_layout - } -\def\cwbb@tex{\cwbb@user_bindings} - -\def\cwbb@CR{% - \cwbb@cweave_bindings - \cwbb@doc_layout - } -%%% \endprog - - - - -%%% \chap Saving and restoring control sequences. - -%%% We have a lot of cseqs which are defined within the namespace of this -%%% module and which will be used with other names. This usage is in a -%%% controlled environment, namely neither in documentation nor in \TeX{} -%%% state. (I.e., the text processed is tagged by \cweave{}, not by humans; -%%% therefore we have a precise specification of the cseqs we have to -%%% accept.) We cannot work with groups where a cseq is just redefined -%%% and \TeX{} takes care for establishing the old binding again; when we -%%% switch from program state to \TeX{} state all the bindings which were -%%% in effect before the program state get active, i.e., in the -%%% documentation state, must be in effect again. We cannot simply -%%% consider the \TeX{} state as something parallel to program state, it -%%% must be a hierarchical relationship: In the program state values are -%%% set up which must be available after switching back from \TeX{} to -%%% program state. - -%%% We save the current binding of a cseq in another cseq, but only if -%%% there exists a binding currently. This is done to save valuable -%%% \TeX{} main memory. (Why don't all those people who talk about -%%% extending \TeX{} not just implement dynamic memory management for the -%%% existing \TeX{}? It would still be \TeX{} and would \emph{really} be -%%% a worthy activity. But not enough fun, I assume\,\dots) Actually, one -%%% can assume that nearly no cseq bindings must be saved at all---the -%%% used names are strange enough. The bindings of |\foo|, i.e., of the -%%% cseq with the name \fbox{\ttfamily foo}, is saved as the cseq with the -%%% name \fbox{\ttfamily cweb\char `\\ foo}, i.e., as -%%% |\csname cweb\string\foo \endcsname|. - - -%%% \sect The save process is not done statically, but by the macro -%%% |\cwbb@rebind| which interprets a list of tuples $({\it old\_name}, -%%% {\it new\_name})$, terminated by the tuple $(|\stop|, |\stop|)$. -%%% Eventually it constructs two new lists, |\cwbb@to_restore| with the -%%% cseqs which had a binding, and |\cwbb@undefined| with the names which -%%% didn't have one. - -%%% The saving is actually done by |\cwbb@save_binding|, |\cwbb@rebind| -%%% is responsible for the initialization, |\cwbb@do_rebind| for the -%%% effective rebinding and the tail recursion on the list. - -%%% \begin{fixme} -%%% We could pull the |\next| assignment in the |\else| branch out of -%%% the loop to get a better performance. Should measure if this is of -%%% interest. -%%% \end{fixme} - -%%% \beginprog -\newtoks\cwbb@undefined -\newtoks\cwbb@to_restore - -\def\cwbb@rebind{% - \cwbb@undefined{}% - \cwbb@to_restore{}% - \cwbb@do_rebind - } -\def\cwbb@do_rebind#1#2{% - \ifx #1\stop - \let\next\relax - \else - \cwbb@save_binding #2% - \let #2=#1% - \let\next\cwbb@do_rebind - \fi - \next - } -%%% \endprog - - -%%% \sect If the cseq to be saved is undefined, it may just be added to -%%% the ``undefined list.'' Otherwise its binding is saved and it's added -%%% to the ``to-be-restored list.'' - -%%% \TeX{}nical note: The cseq-name for the saved binding must be created -%%% before the |\let| is executed. - -%%% \beginprog -\def\cwbb@save_binding#1{% - \ifx #1\undefined - \cwbb@undefined \expandafter{\the\cwbb@undefined #1}% - \else - \expandafter\let \csname cweb\string#1\endcsname =#1% - \cwbb@to_restore \expandafter{\the\cwbb@to_restore #1}% - \fi - } -%%% \endprog - - -%%% \sect The restoration of rebound cseqs is a two-tied activity: All -%%% previously undefined cseqs must be made undefined again, and all saved -%%% cseqs must be restored. Actually, we don't need to reset the two token -%%% lists, but we do it to save space. - -%%% Both |\cwbb@undefine| and |\cwbb@restore_binding| iterate over a list -%%% of cseqs terminated by |\stop|. - -%%% \begin{fixme} -%%% And here the |\next| assignment could be prepended to the loop as -%%% well. -%%% \end{fixme} - -%%% \beginprog -\def\cwbb@restore_bindings{% - \expandafter\cwbb@undefine \the\cwbb@undefined \stop - \cwbb@undefined{}% - \expandafter\cwbb@restore_binding \the\cwbb@to_restore \stop - \cwbb@to_restore{}% - } - -\def\cwbb@undefine#1{% - \ifx #1\stop - \let\next\relax - \else - \let#1\undefined - \let\next\cwbb@undefine - \fi - \next - } -%%% \endprog - - -%%% \sect \TeX{}nical note: As in |\cwbb@save_binding|, the cseq-name for -%%% the saved binding must be created before the |\let|s are executed. - -%%% \begin{fixme} -%%% Another |\next| assignment. -%%% \end{fixme} - -%%% \beginprog -\def\cwbb@restore_binding#1{% - \ifx #1\stop - \let\next\relax - \else - \expandafter\let \expandafter#1\csname cweb\string#1\endcsname - \expandafter\let \csname cweb\string#1\endcsname \undefined - \let\next\cwbb@restore_binding - \fi - \next - } -%%% \endprog - - - - -%%% \chap Chunks. - -%%% All chunks are numbered subsequently. The chunk number is supplied as -%%% part of the markup. In addition, the `changed' tag |\*| may be -%%% appended to the chunk number. - -%%% By default, chunks have approximately two picas vertical space in -%%% front. - -%%% If we use an hierarchic structure, we output the chunk number at the -%%% refinement. (It's only needed to identify the refinement for cross -%%% references.) But chunks are important structural units and thus should -%%% be marked by typographic means that's more visible than the space -%%% mentioned above, we add a `chunk start marker'. - -%%% For a flat structure, we output the chunk number as the chunk start -%%% marker, that is the traditional \WEB{} layout. - -%%% In any case, the documentation part shall be run in after the chunk -%%% start marker. - -%%% \beginprog -\newskip\CwebChunkPreSkip - \CwebChunkPreSkip=2pc plus 1pc minus 6pt -%%% \endprog - - -%%% \sect In \LaTeX{}, structural divisions are best realized by -%%% |\@startsection|, we'll use it also for chunk starts. The chunk start -%%% marker is the section heading. For hierarchic structure, we use a -%%% traditional paragraph sign, used since medieval times to tag new text -%%% units. Our first test showed that the paragraph sign has typically an -%%% underlength, that doesn't look good at the start of a chunk. We raise -%%% the sign by its depth. - -%%% For flat structure, we don't have text as the section heading, -%%% but we have to cope for a deficiency of \LaTeX{}: It always leaves a -%%% quad after the section number (by the way, this is not mentioned in -%%% the documentation---you have to look in the macros to figure this -%%% out). So we use a backskip of $\rm -1\,em$ as the chunk start marker -%%% then. - -%%% Changed chunks are marked by a changeflag, by default a star lapping -%%% to the right. We need the information if that chunk is changed to -%%% decide if we shall output the changeflag. We demand from the chunk -%%% macros that they record that info in the flag |@cwbb_changed_chunk@|. - -%%% Each structural division must be categorized, it belongs to a -%%% \textsl{type}. This type determines also the name of the counter, the -%%% mark handling for this category, and how this section tag is -%%% represented in the table of contents. The type of chunks is `|chunk|' -%%% (trivial, isn't it?). - -%%% Furthermore, a structural division in \LaTeX{} has an associated -%%% \textsl{level}. That level is used to determine if that division get -%%% numbered in text or table of contents. For sections, we'll compute the -%%% level from the rank, it will not be larger than the rank.% -%%% \footnote{Check the next section for a more precise definition of -%%% `rank' and `level'.} -%%% Since the highest section rank is~10, we may use 11 as chunk level. - -%%% For flat structure, we output the number for all section headings, -%%% including chunks. For hierarchic structure we use the default maximum -%%% level as supplied by our document class (e.g., 3~for \cls{article}, -%%% and 2~for \cls{report} or \cls{book}). - -%%% As a last point, we have to care already for sections in flat -%%% structure. They will use the |chunk| category as well, we have to -%%% distinguish them in the table of contents. For that, we'll record the -%%% level in the text, it will get written to the table of contents. - -%%% \beginprog -\newif\if@cwbb_changed_chunk@ -\let\CwebChangeFlag=* -\if@cweb@suppress@changehints@ - \let\cwbb@change_flag=\relax -\else - \let\cwbb@change_flag=\CwebChangeFlag -\fi -\def\cwbb@lap_change_flag{\rlap{\cwbb@change_flag}} - -\ifcase \cweb@structure - %% hierarchic - \let\CwebChunkHeadingStyle\relax - \newbox\cweb@chunk_marker - \setbox\cweb@chunk_marker=\hbox{\P} % tradition from medivial times - \setbox\cweb@chunk_marker=\hbox{% - \raise\dp\cweb@chunk_marker \box\cweb@chunk_marker - } - \def\CwebChunkHeadingMarker{\copy\cweb@chunk_marker} - \def\CwebChunkHeading#1{% - \CwebChunkHeadingMarker - \if@cwbb_changed_chunk@ \cwbb@lap_change_flag \fi - } - \or - %% flat - \def\cwbbRank#1{} - \def\CwebChunkHeadingStyle{\bfseries} - \def\CwebChunkHeading#1{% - \protect\cwbbRank{#1}% - \kern -1em - \if@cwbb_changed_chunk@ \cwbb@lap_change_flag \fi - } -\fi -%%% \endprog - - -%%% \sect Chunks are tagged with |\M| and get passed the chunk number as -%%% argument. Before we evaluate |\@startsection|, we'll start the chunk. -%%% That's common code to be used by sections as well, as they also -%%% implicitely start a chunk. - -%%% \beginprog -\def\M#1{% - \cwbb@start_chunk{#1}% - \@startsection - {chunk}% % category, == counter etc. - {11}% % level - {\z@}% % no indentation for heading - {\CwebChunkPreSkip}% % skip above heading - {\m@ne em}% % run-in heading, 1em distance to text - {\normalfont\CwebChunkHeadingStyle}% % layout - {\CwebChunkHeading{11}}% % text, level might go to toc file - } -%%% \endprog - - -%%% \sect But let's first declare how a chunk number is represented. The -%%% principle rendering is controlled by |\thechunk|, namely, we get -%%% arabic numbers. This rendering is used both for creation of the -%%% section header (if in flat mode) and for cross references. I.e., -%%% |\ref| expands into it. - -%%% But for flat structure we need different expansions: In the section -%%% header a period shall be appended, a cross reference shall appear -%%% without such a period. We use two different macros: |\thechunk| -%%% creates the number with the period, |\cwbb@refchunk| only the number. -%%% The latter is used for a redefinition of |\@currentlabel|. Of course, -%%% for hierarchic structure, both are the same. - -%%% \beginprog -\newcounter{chunk} - -\def\cwbb@refchunk{\arabic{chunk}} - -\ifcase \cweb@structure - %% hierarchic - \let\thechunk=\cwbb@refchunk - \or - %% flat - \def\thechunk{\arabic{chunk}.} -\fi -%%% \endprog - - -%%% \sect Each chunk is started by |\cwbb@start_chunk|, which does the -%%% common actions. First of all, we switch to documentation state. - -%%% Then we store the chunk number in the |chunk| counter. That implies -%%% that the chunk start must not step this counter! We'll take care for -%%% that later by redefining |\refstepcounter|. The actual number is -%%% passed as the argument, including an optional |\*| used to denote -%%% changed chunks. We'll redefine that cseq to update the flag -%%% |@cwbb_changed_chunk@|. - -%%% Each chunk must be typeset with an open |\if| since it is finished by -%%% |\fi|. If we shall suppress the output of unchanged chunks, we have -%%% to use |\iffalse| if not |@cwbb_changed_chunk@|, otherwise |\iftrue|. -%%% The flag |@cwbb_print_chunk@| is set up to provide an appropriate -%%% test. - -%%% When we typeset a chunk, we evaluate |\cwbb@init_print_chunk|. For -%%% hierarchic structure, that cseq will be used to initialize the -%%% typesetting of the chunk number at program parts. - -%%% \beginprog -\if@cweb@suppress@unchanged@ - \def\if@cwbb_print_chunk@{\if@cwbb_changed_chunk@} - \@gobble\fi % close \if in case it's skipped -\else - \let\if@cwbb_print_chunk@=\iftrue - \@gobble\fi % same here -\fi - -\def\cwbb@start_chunk#1{% - \cwbb@documentation - \begingroup - \def\*{\global\@cwbb_changed_chunk@true}% - \global\@cwbb_changed_chunk@false - \global \c@chunk #1\relax % might expand \* - \endgroup - \if@cwbb_print_chunk@ - \cwbb@init_print_chunk - } -%%% \endprog - - -%%% \sect |\@startsection| will step the section counter (i.e., |chunk|). -%%% Since we just assigned it in |\cwbb@start_chunk|, that would leave us -%%% with a counter that's one too high. And our output in cross references -%%% may be wrong, as a period is appended in flat structure. - -%%% That damage all comes from one macro, |\refstepcounter|; let's -%%% advice it to do the Right Thing for |chunk| counters. - -%%% \beginprog -\let\cwbb@refstepcounter=\refstepcounter - -\def\cwbb@string@chunk{chunk} -\def\refstepcounter#1{% - \def\@tempa{#1}% - \ifx \@tempa\cwbb@string@chunk - \protected@edef\@currentlabel{\cwbb@refchunk}% - \else - \cwbb@refstepcounter{#1}% - \fi - } -%%% \endprog - - - - -%%% \chap Sections. - -%%% Important sections are started on a new page, normal sections have the -%%% same space as chunks in front. The very first section does not -%%% automatically start on a new page since a title may be in front of it. - -%%% Each section division has a \textsl{rank}, that denotes the section -%%% depth as seen by \cweave{}. - -%%% For this depth we compute a \textsl{level}, used to denote the section -%%% depth for \LaTeX{}. This section depth is used to decide where -%%% numbering shall stop, or if that entry shall be presented in the table -%%% of contents, etc. - -%%% These two numbers are not the same, due to the support of document -%%% classes with chapters. - -%%% We consider a section as important if it's rank is smaller than~3, -%%% i.e., then we'll start a new page. This limit is controlled by the -%%% number |\CwebRankNoEject|. The rank is used as the section level -%%% and is therefore available to configure depth of typeset numbering and -%%% appearance in table of contents. - -%%% \beginprog -\def\CwebRankNoEject{3} -%%% \endprog - - -%%% \sect Sections are started with the macro |\N|. It's first parameter -%%% is the section's rank. The second parameter is the chunk number, the -%%% third the title of the section. This last parameter must be terminated -%%% by a dot. - -%%% Each section implicitly starts a chunk. As explained above, major -%%% sections may eject the page, and we add our actual section heading -%%% with |\CwebSection|. - -%%% We also tell the user that we have reached the next section by telling -%%% him about the current chunk number. The message is output after the -%%% section header is set, it shall be on the correct page. Since the -%%% token list to be output is expanded at shipout time, we must take care -%%% for the immediate expansion ourselves. - -%%% \beginprog -\def\N#1#2#3.{% - \cwbb@start_chunk{#2}% - \CwebEjectSection{#1}% - \CwebSection{#1}{#3}% - \begingroup - \def\*{}% - \edef\tmp{*#2}% - \message \expandafter{\tmp}% - \endgroup - } -%%% \endprog - - -%%% \sect At the start of a section we usually eject the page if our rank -%%% is not too low. But if the user had a title above the first section, -%%% he won't want this page break. So we try to guess it. If we guess -%%% wrong, the user may either add |\newpage| himself or he may redefine -%%% |\CwebEjectSection| in a package. - -%%% \beginprog -\def\CwebEjectSection#1{% % #1 == rank - \gdef\CwebEjectSection##1{% - \relax - \ifnum ##1<\CwebRankNoEject\relax - \newpage - \fi - }% - } - -\if@titlepage - \CwebEjectSection{} -\fi -%%% \endprog - - -%%% \sect Now comes a heary piece. We have 11~section ranks, and need 11 -%%% different section categories, section counters, etc. For flat -%%% structure, they shall all do the same; for hierarchic structure, they -%%% shall be really different. - -%%% \noindent Let's have a look at the hierarchic structure first, it's -%%% more complex. -%%% % -%%% \begin{itemize} - -%%% \item We associate section rank~0 (that's `|@**|') with document -%%% parts, i.e., map it to |\part|. Many smaller programs won't use it. - -%%% \item If we are used in a class that has a bound cseq |\chapter|, we -%%% associate rank~1 (`|@*0|') with it and rank~2 (`|@*1|') with -%%% |\section|. Otherwise we associate rank~1 with |\section|. These -%%% tags (|\chapter| and/or |\section|) must be defined because many -%%% macros that want to create section divisions will use them. - -%%% \item All other section ranks are placed below |\section|. -%%% |\subsection| and other \LaTeX{} style markup is not supported. - -%%% For hierarchic structure, we identify these sections with category -%%% names `|section|$l$', where $l$ is the respective level, computed -%%% from the rank. Those section names do not exist yet, we have to -%%% create them. - -%%% \end{itemize} - -%%% Now we come to the point why we can't use the rank as the section -%%% level passed to \LaTeX{}: When we assume the level usage of \LaTeX{}'s -%%% standard classes, |\section| is \emph{always} on level~1, independent -%%% of the existence of |\chapter|. The latter is placed on level~0, its -%%% existence only influences the section level of |\part|, which is -%%% either $-1$ or~0. - -%%% This implies that |\subsection| in a standard class is always on -%%% level~2, but our equivalent section division is either `|@*0|' -%%% (rank~1) or `|@*1|' (rank~2). I.e., when we have chapters, we use a -%%% level that's one lower than the rank, otherwise we use the rank. - -%%% For flat structure, we use type |chunk|. This way we'll use the chunk -%%% numbers, they are already set up. - -%%% For flat structure, we will map all ranks to the same section markup. -%%% This markup will also be accessible by |\section| or |\chapter|. They -%%% will be declared to be on a level that is the same as the rank. - - -%%% \sect The printed representation of a section divison number is simply -%%% the presentation from the next upper level, a full stop, and an arabic -%%% section number. When we compute the name of the previous level we must -%%% pay attention to our first section division created this way. This -%%% division must be placed below |section|, without any following number. - -%%% Since registers are a valuable resource in \TeX{}, we have to take -%%% care not to allocate a superfluous one. - -%%% \beginprog -\ifcase \cweb@structure - %% hierarchic - \newcounter{section2}[section] - \@namedef{thesection2}{\@nameuse{thesection}.\arabic{section2}} - \newcounter{section3}[section2] - \@namedef{thesection3}{\@nameuse{thesection2}.\arabic{section3}} - \newcounter{section4}[section3] - \@namedef{thesection4}{\@nameuse{thesection3}.\arabic{section4}} - \newcounter{section5}[section4] - \@namedef{thesection5}{\@nameuse{thesection4}.\arabic{section5}} - \newcounter{section6}[section5] - \@namedef{thesection6}{\@nameuse{thesection5}.\arabic{section6}} - \newcounter{section7}[section6] - \@namedef{thesection7}{\@nameuse{thesection6}.\arabic{section7}} - \newcounter{section8}[section7] - \@namedef{thesection8}{\@nameuse{thesection7}.\arabic{section8}} - \newcounter{section9}[section8] - \@namedef{thesection9}{\@nameuse{thesection8}.\arabic{section9}} - \ifx \chapter\undefined - \newcounter{section10}[section9] - \@namedef{thesection10}{\@nameuse{thesection9}.\arabic{section10}} - \fi -\fi -%%% \endprog - - -%%% \sect Sections are typeset by |\CwebSection|; rank and title are the -%%% arguments. - -%%% For hierarchic structure, we select the proper cseq according to rank: -%%% |\part|, |\chapter| if this is a structure with chapters, |\section|, -%%% and |\cwbb@section{|\|}| for other ranks. For the last cseq we -%%% also have to supply the section category, it's `|section|$l$' where -%%% $l$ is the rank~$r$ if we don't have chapters, $r-1$ otherwise. - -%%% That category cannot be computed by |\cwbb@section| itself since we -%%% want to use that macro also for flat structure. But there all sections -%%% are basically chunks, we have to use the |chunk| category there. Since -%%% we want to differentiate them in the table of contents nevertheless, -%%% we record the current rank in the title. - -%%% \beginprog -\ifcase \cweb@structure - %% hierarchic - \ifx \chapter\undefined - \def\CwebSection#1#2{% - \ifcase #1 - %% 0 - \let\next\part - \or %% 1 - \let\next\section - \else %% level = rank - \def\cwbb@sect_name{section#1}% - \def\next{\cwbb@section{#1}}% - \fi - \next{#2}% - } - \else - \def\CwebSection#1#2{% - \ifcase #1 - %% 0 - \let\next\part - \or %% 1 - \let\next\chapter - \or %% 2 - \let\next\section - \else %% level = rank - 1 - \count@=#1 \advance \count@\m@ne - \edef\cwbb@sect_name{section\number\count@}% - \edef\next{\noexpand\cwbb@section{\number\count@}}% - \fi - \next{#2}% - } - \fi - \or - %% flat - \def\CwebSection#1#2{% - \def\cwbb@sect_name{chunk}% - \cwbb@section{#1}{\protect\cwbbRank{#1}#2}% - } - \def\section{% - \def\cwbb@sect_name{chunk}% - \cwbb@section{1}% - } -\fi -%%% \endprog - - -%%% \sect We use the same layout for all minor sections. That layout can -%%% be changed by ammended by defining |\CwebSect|$r$|Hook| to redefine -%%% |\CwebSectPreSkip| and/or |\CwebSectLayout| locally. (Of couse, it may -%%% be redefined once globally, too.) These are the values to be used for -%%% arguments 4 and~5 of |\@startsection|, pay attention to the skip sign, -%%% telling about indentation of the first paragraph. And don't forget -%%% that the skip is only used for sections on ranks below -%%% |\CwebRankNoEject|, the others start on a new page anyhow. - -%%% The default definition sets the section title in bold and leaves the -%%% same space as before chunks. The first paragraph of the following -%%% documentation has no indentation. - -%%% Other layout changes (indentation for heading, etc.)\ must be made by -%%% redefining |\cwbb@section|. Or---email me, if you want to do it. Then -%%% I might be enclined to introduce further possibilities. - -%%% \beginprog -\newskip\CwebSectPreSkip - \CwebSectPreSkip = -\CwebChunkPreSkip -\def\CwebSectLayout{\normalfont\bfseries} - -\def\cwbb@section#1{% % #2 (next token) is title - \csname CwebSect#1Hook\endcsname % \relax if undefined - \expandafter\@startsection - \expandafter{\cwbb@sect_name}% % category; for counter, etc. - {#1}% % level is rank - \z@ % no indentation for heading - \CwebSectPreSkip % skip above, maybe no next par indent - \medskipamount % skip below heading - \CwebSectLayout - } -%%% \endprog - - - - -%%% \chap Marks. - -%%% \begin{fixme} -%%% Since I don't know yet how to handle marks I ignore most of them for -%%% the time being. - -%%% Have to change this later. -%%% \end{fixme} - -%%% \beginprog -\let\chunkmark\@gobble - -\count@=2 -\@whilenum \count@<11 \do { - \expandafter\let \csname section\number\count@ mark\endcsname \@gobble - \advance \count@ by 1 - } -%%% \endprog - - - - -%%% \chap Typesetting programs. - -%%% Program pieces come in two flavours: as argument of |\PB|, or as -%%% material after |\B|. In the former case we can use a group for the -%%% switch to the restricted program state, the group end will restore the -%%% previous state again. In the latter case we use |\B| for the switch to -%%% program state, the cross reference list or the next chunk will go to -%%% another state. Since we have to do more for the material after |\B|, -%%% we define this cseq later. - -%%% \beginprog -\def\PB#1{% - \begingroup - \cwbb@Rprogram - \leavevmode - #1% - \endgroup - } -%%% \endprog - - -%%% \sect Note, that |\Y| cannot just be |\smallskip|, as in Plain -%%% \cweb{}. We must assert that the current paragraph is ended before the -%%% vertical glue is inserted, and that's not done by the \LaTeX{} -%%% definition of |\smallskip|. In addition we add some negative penalty, -%%% here is a good place for a page break. As the penalty value we use -%%% half the chunk break penalty---of course a chunk start is an even -%%% better place for a page break\,\dots - -%%% It might be that |\Y| is the very first token in a chunk. Then the -%%% chunk start marker isn't set already since it is regarded as a run-in -%%% section heading. In that case we don't set the vertical skip but -%%% simply start the chunk with the program part. - -%%% \TeX{}nical note: The flag |@noskipsec| may be used to test if we're -%%% immediately after a run-in section heading. - -%%% \beginprog -\newcount\CwebProgPenalty - \CwebProgPenalty=\@secpenalty - \divide\CwebProgPenalty by 2 -\def\Y{% - \if@noskipsec - \else - \par - \penalty\CwebProgPenalty - \smallskip - \fi - } -%%% \endprog - - -%%% \sect Yep, let's unfold the ``official'' names of the cseqs used in -%%% program state. - -%%% If we turn on the \cweave{} bindings, they might be in effect already, -%%% we don't need to establish them again. We can test -%%% |\cwbb@user_bindings| for this case, it will be redefined then. - -%%% \beginprog -\def\cwbb@cweave_bindings{% - \ifx \cwbb@user_bindings\relax - \cwbb@rebind - % indentation and paragraph layout - \cwbb@incr_indent \1% - \cwbb@decr_indent \2% - \cwbb@expr_break \3% - \cwbb@backup \4% - \cwbb@opt_break \5% - \cwbb@break \6% - \cwbb@big_break \7% - \cwbb@noindent \8% - % C/C++ tokens - \CwebRel \?% - \CwebAddress \AND - \CwebComplement \CM - \CwebScope \DC - \CwebEquiv \E - \CwebGe \G - \CwebRightShift \GG - \CwebNe \I - \CwebAssign \K - \CwebLeftShift \LL - \CwebMod \MOD - \CwebNull \NULL - \CwebNot \R - \CwebBinOr \OR - \CwebMemberRef \PA - \CwebThis \this - \CwebOr \V - \CwebAnd \W - \CwebXor \XOR - \CwebLe \Z - \CwebPointer \MG - \CwebPointerMemberRef \MGA - \CwebDecr \MM - \CwebIncr \PP - % more tokens - \CwebId \\% - \CwebIdLetter \|% - \CwebRes \&% - \CwebString \.% %% ( ...Emacs... - \CwebStringBreak \)% - \CwebNumber \T - \CwebCombinedOp \MRL - % goes to TeX state - \CwebComment \C - \CwebCxxComment \SHC - \CwebRefName \X - % CWEB tokens - \CwebMacrosHere \ATH - \CwebDefine \D - \cwbb@format \F - \CwebIdCat \J - \CwebVerbString \vb - % cross reference tags - \cwbb@change_flag \*% - \CwebCRAlso \A - \CwebCRsAlso \As - \CwebCRCite \Q - \CwebCRsCite \Qs - \CwebCRUse \U - \CwebCRsUse \Us - \CwebCREt \ET - \CwebCRsEt \ETs - % finish the list - \stop\stop - \def\cwbb@user_bindings{% - \cwbb@restore_bindings - \let\cwbb@user_bindings\relax - }% - \fi - } -%%% \endprog - - -%%% \sect Since most of the \cweave{} bindings are simple and tedious -%%% coding, we'll have a look at the program layout next. Between two -%%% paragraphs there must not be any skip, the skip used in document -%%% layout is saved in |\cwbb@save@parskip|. A few other layout -%%% parameters from the document layout must be saved as well. - -%%% \beginprog -\newskip\cwbb@save@parskip -\newskip\cwbb@save@rightskip -\newcount\cwbb@save@sem_sfcode -\newcount\cwbb@save@pretolerance -\newcount\cwbb@save@hyphenpenalty -\newcount\cwbb@save@exhyphenpenalty - -\def\cwbb@save_doc_layout{% - \cwbb@save@parskip\parskip - \cwbb@save@rightskip\rightskip - \cwbb@save@sem_sfcode\sfcode`\; - \cwbb@save@pretolerance\pretolerance - \cwbb@save@hyphenpenalty\hyphenpenalty - \cwbb@save@exhyphenpenalty\exhyphenpenalty - } -\def\cwbb@restore_doc_layout{% - \parskip\cwbb@save@parskip - \rightskip\cwbb@save@rightskip - \sfcode`\;=\cwbb@save@sem_sfcode - \pretolerance\cwbb@save@pretolerance - \hyphenpenalty\cwbb@save@hyphenpenalty - \exhyphenpenalty\cwbb@save@exhyphenpenalty - } -%%% \endprog - - -%%% \sect When |\cwbb@program_layout| is called for the very first time -%%% we have to set up some variables. This cannot be done in advance -%%% since they depend on values which might be changed by the user in the -%%% preamble. This setup is done in |\cwbb@layout_init|. - -%%% If the program layout is already active, we must not switch it on -%%% another time. This can be tested by the current binding of -%%% |\cwbb@doc_layout|. - -%%% \beginprog -\def\cwbb@program_layout{% - \ifx \cwbb@doc_layout\relax - \cwbb@layout_init - \cwbb@save_doc_layout - \def\cwbb@doc_layout{% - \cwbb@restore_doc_layout - \let\cwbb@doc_layout\relax - }% - % set new values - \parskip\z@skip - \rightskip\z@ plus 100\p@ minus 10\p@ - \sfcode`\;=3000 - \pretolerance\@M - \hyphenpenalty 1000 % strings can be broken this way - \exhyphenpenalty\@M - \fi - } -%%% \endprog - - -%%% \sect The unit of the basic indentation is stored in -%%% |\CwebIndentUnit|. Continuation lines are indented two units further, -%%% i.e., the initial hanging indentation is 3~units. The current hanging -%%% indentation is kept in |\cwbb@indent|. - -%%% We need undiscardable items which can be used as backspaces, of one -%%% and two units, respectively. This is done best by boxes. The -%%% initialization of the boxes must be postponed until the user had the -%%% chance to change |\CwebIndentUnit|, it's done in the program state -%%% initialization. - -%%% \beginprog -\newdimen\CwebIndentUnit - \CwebIndentUnit=1em -\newdimen\cwbb@indent - -\newbox\cwbb@bak % backspace one unit -\newbox\cwbb@bakk % backspace two units - -\def\cwbb@layout_init{% - \global\setbox\cwbb@bak \hbox to -1\CwebIndentUnit{}% - \global\setbox\cwbb@bakk \hbox to -2\CwebIndentUnit{}% - \global\let\cwbb@layout_init\relax - } -%%% \endprog - - -%%% \sect Now we can formulate how to start typesetting program pieces: We -%%% switch to program state, set the initial indentation, and add the -%%% basic indentation of the first code line. Then we might add a marker -%%% to this program part; for hierarchic structure we want to typeset the -%%% chunk number in the margin of the chunk's program part. That's not -%%% really possible, 'though: definitions and format requests are also -%%% introduced with |\B|, so the chunk number will happen to be at the -%%% start of the definition part if one exists. - -%%% If the code line is the very first text to be typeset in this chunk, -%%% we don't add the basic indentation---we're already indented from the -%%% run-in chunk start marker. But we must not start our chunk with -%%% |\noindent|, the marker would be typeset in the left margin then. (I -%%% consider this as a \LaTeX{} error.) So we just emulate an empty -%%% documentation part, the marker is now set correctly. |\B| can test for -%%% this case: |@noskipsec| is still true then. - -%%% \beginprog -\def\B{% - \cwbb@program - \cwbb@indent 3\CwebIndentUnit \hangindent\cwbb@indent - \ifvmode - \if@noskipsec - \indent % add an empty documentation part - \else - \noindent \kern\CwebIndentUnit - \fi - \fi - \CwebNumberProgramPart - } -%%% \endprog - - -%%% \sect The chunk number shall be added at the first program part. We -%%% have a hook in the chunk start where we can set up -%%% |\CwebNumberProgramPart|. It will redefine itself at first call, to -%%% disable further output on more |\B| occurences in a chunk. - -%%% The chunk number should always be in the left margin. If it's in the -%%% right margin, there would be too much horizontal space between the -%%% code start and the actual number. (The first code line is typically -%%% not very long.) \LaTeX{} does not allow to select the margin for -%%% marginpars, therefore we have to typeset the marginal note `by hand'. -%%% As we know that we're in horizontal mode when we're called, |\vadjust| -%%% is used to create the note. The standard \LaTeX{} dimen register for -%%% the distance between marginal notes and text matter is used, of -%%% course. - -%%% Note that marginal notes may overwrite the chunk number. As it's very -%%% unlikely that somebody issues marginal notes in program mode (that's -%%% quite difficult and involves ingenious usage of the implementation of -%%% this macros), I won't care for that case. - -%%% \begin{fixme} -%%% The baseline of the marginal note shall be aligned to the baseline -%%% of the preceding line. That does not happen by default. Currently, I -%%% assume that the preceding line has a depth of appropriately the -%%% depth of a~`g'. Experiments showed that this gives good results for -%%% most \cweb{} documents. But nevertheless one should determine the -%%% exact depth of the preceding line, to know how much |box0| should be -%%% raised. If anybody knows how this can be done, please tell me. (I -%%% know about the route over the output routine, implementing an own -%%% marginal note category, but this seems too much effort.) -%%% \end{fixme} - -%%% For flat structure, we don't add any program part marker and we -%%% don't need to initialize it. - -%%% \beginprog -\ifcase \cweb@structure - %% hierarchic - \def\cwbb@marginal_chunkno{% - \vadjust{% - \setbox\z@ \hbox to \z@{% - \hss \vphantom{g}% - \small \thechunk - \hskip \marginparsep - }% - \vbox to \z@{% - \hsize\z@ - \vss - \noindent \raise \dp\z@ \box\z@ - }% - }% - } - \def\cwbb@init_print_chunk{% - \def\CwebNumberProgramPart{% - \cwbb@marginal_chunkno - \let\CwebNumberProgramPart\relax - }% - } - \or - %% flat - \let\cwbb@init_print_chunk\relax - \let\CwebNumberProgramPart\relax -\fi -%%% \endprog - - -%%% \sect If a statement is finished, a new paragraph with the basic -%%% indentation has to be started. - -%%% An optional statement break is implemented by a low penalty which -%%% will be selected if the line has to be broken. We assume that the -%%% hanging indentation of the new line is already set correctly, and -%%% have to backup two units to get the basic indentation. It might be -%%% that the line break is not chosen by \TeX{}, we compensate the -%%% backspace for this case. This compensation is discarded at the start -%%% of a new line. - -%%% \beginprog -\def\cwbb@break{% % forced break, between statements - \ifmmode\else - \endgraf % in LaTeX it isn't sure what \par is really... - \noindent - \hangindent\cwbb@indent \kern\cwbb@indent - \copy\cwbb@bakk % go back to basic indentation - \ignorespaces - \fi - } -\def\cwbb@opt_break{% % optional break between statements - \hfil \penalty\m@ne - \hfilneg \kern .5em \kern 2\CwebIndentUnit % discarded on line break - \copy\cwbb@bakk - \ignorespaces - } -\def\cwbb@big_break{% % forced break and a little extra space - \Y - \cwbb@break - } -\def\cwbb@expr_break#1{% % break with penalty #1 * 10 - \hfil \penalty#10 - \hfilneg % discarded on line break - } -%%% \endprog - - -%%% \sect When we increment the indentation, we must not forget to set -%%% the hanging indentation immediately since |\cwbb@opt_break| relies on -%%% the new value. If a continuation line is needed it will also be -%%% indented one unit more, which is ok since it should be distinguishable -%%% from the next line. -%%% % -%%% \begin{fixme} -%%% Shouldn't the hanging indentation be set anew at the end of -%%% |\cwbb@decr_indent| as well? -%%% \end{fixme} - -%%% \beginprog -\def\cwbb@incr_indent{% - \global\advance\cwbb@indent\CwebIndentUnit - \hangindent\cwbb@indent - } -\def\cwbb@decr_indent{\global\advance\cwbb@indent -\CwebIndentUnit} -\def\cwbb@backup{\copy\cwbb@bak} -\def\cwbb@noindent{% % no indentation - \hskip -\cwbb@indent \hskip 2\CwebIndentUnit - } -%%% \endprog - - - - -%%% \chap Program (C or \C++) tokens. - -%%% Since the user might want to change the (somewhat unusual) way some -%%% of the operators are typeset, we supply names for them. - -%%% \beginprog -\let\CwebAnd=\land % logical and, && -\let\CwebEquiv=\equiv % equiv sign, for == -\let\CwebGe=\ge % greater or equal -\let\CwebLe=\le % less or equal -\let\CwebNe=\ne % unequal, != -\let\CwebNull=\Lambda % NULL pointer -\let\CwebNot=\lnot % logical not, ! -\let\CwebOr=\lor % logical or, || -\let\CwebXor=\oplus % bitwise exclusive or, ^ -%%% \endprog - - -%%% \sect Some symbols have to be shifted around, to save computation time -%%% we put them in boxes. - -%%% \begin{fixme} -%%% It's not sure if the following symbols still look good in other font -%%% families than Computer Modern. The movements might need to get -%%% adapted when more experience is available. They were chosen from -%%% Plain \cweb{}, where these were explicit movements measured in -%%% points. I changed the dimension to quads, to achieve at least the -%%% support for different sizes in the Computer Modern family. -%%% \end{fixme} - -%%% \TeX{}nical note: The pointer symbol must not be declared as a math -%%% symbol (e.g., with |\DeclareMathSymbol|). Then \TeX{} would insert an -%%% italic correction behind it, according to rule~17 from appendix~G. -%%% (Please send email if you know of an easy way to prevent that -%%% addition.) So I use the symbol as an accent, but then I have to supply -%%% a nucleus for this math list. That nucleus also determines the total -%%% width of this construct. As the vector accent has a width of -%%% approximately 5\,pt in |cmmi10|, I'm going to use 0.5\,em. (That -%%% heuristic is as good as any other I can think of.) - -%%% \beginprog -%% pointer to struct component (`->'), use symbol of \vec accent -\newbox\cwbb@pointer -\setbox\cwbb@pointer=\hbox{% - \kern -.2em - \lower .3em \hbox{$\vec{\kern .5em}$}% - \kern .1em - } - -\newbox\cwbb@decr % decrement, -- -\setbox\cwbb@decr=\hbox{% - \kern .05em - \raise .1em \hbox{$\scriptstyle {-}\kern -.1em{-}$}% - \kern .05em - } -\newbox\cwbb@incr % increment, ++ -\setbox\cwbb@incr=\hbox{% - \kern .05em - \raise .1em \hbox{$\scriptstyle {+}\kern -.1em{+}$}% - \kern .05em - } -%%% \endprog - - -%%% \sect Although the following symbols are typeset like an ``ordinary -%%% \C++ programmer'' would expect them, we provide own module names -%%% nevertheless. They can now be changed as well, i.e., orthogonality is -%%% enhanced. (And we can use |\cwbb@rebind| for assigning them to their -%%% names while we switch to program state\,\dots). - -%%% Note: The comment at |\CwebMod| says ``modulo/remainder'', as this is -%%% not defined by the C standard, i.e., implementation-dependent. - -%%% \beginprog -\mathchardef\CwebAddress="2026 % `&', as binary op -\let\CwebAssign== % assignment -\let\CwebBinOr=\mid % binary or -\def\CwebComplement{{\sim}} % `~', as ordinary symbol -\def\CwebDecr{\copy\cwbb@decr} % decrement -\def\CwebIncr{\copy\cwbb@incr} % increment -\let\CwebLeftShift=\ll % left shift, << -\def\CwebMod{\mathbin{\hbox{\footnotesize\rm\%}}} % modulo/remainder, % -\def\CwebMemberRef{\mathbin{.*}} % ptr to member (on object) -\def\CwebPointer{\copy\cwbb@pointer} -\def\CwebPointerMemberRef{\mathbin{\CwebPointer*}} % ptr to member (on ptr) -\def\CwebRel{\mathrel?} % relation operator -\let\CwebRightShift=\gg % right shift, >> -\def\CwebScope{\kern.1em{::}\kern.1em} % scope resolution - -\def\CwebThis{\CwebRes{this}} % reserved identifier `this' -%%% \endprog - - -%%% \sect The special identifier |\TeX| remains. In math mode it shall be -%%% the identifier, in other modes the usual logo. We use the definition -%%% supplied by DEK (or \textsc{Silvio Levy}?)\ from Plain \cweb{}. - -%%% \beginprog -\def\TeX{% - {% - \ifmmode\it\fi - \mbox{T\kern-.1667em\lower.424ex\hbox{E}\hskip-.125emX}% - }} -%%% \endprog - - -%%% \sect Some tokens don't have constant names, the name is supplied as -%%% the argument. - -%%% Identifiers are typeset in italics, reserved words and type names in -%%% boldface, and strings in typewriter. For an underscore in the bold -%%% words we use a line that's 50\,\% thicker as the usual line thickness. -%%% -- But what is the usual line thickness. As Knuth uses 0.4\,pt for a -%%% 10\,pt Computer Modern font, we'll use 0.06\,em for a CM font in an -%%% arbitrary size. If that line thickness is still OK for other fonts is -%%% doubtful, as it should fit to the stem width. (CM is a rather light -%%% font, after all.) But since there is no font dimension that gives a -%%% hint to an appropriate line thickness, it's our best try. - -%%% \beginprog -\def\CwebCombinedOp#1{\mathrel{\let\K==#1}} % e.g., += operator -\def\CwebId#1{\hbox{\it#1\/\kern.05em}} % identifier, more than one char -\def\CwebIdLetter#1{\hbox{$#1$}} % identifier, one letter -\def\CwebRes#1{% % reserverd words and type names - \hbox{\bf - \def\_{\kern.04em\vbox{\hrule width.3em height.06em}\kern.08em}% - #1\/\kern .05em - }% - } -%%% \endprog - - -%%% \sect In Plain \cweb{} strings are typeset in the font |cmtex10|, -%%% which is a typewriter font with extended ASCII characters. This font -%%% does not have the usual accents and can therefore not used for -%%% typesetting national characters. (Very often they are input in some -%%% 8-bit encoding, the respective character code is made active and is -%%% substituted by a cseq which expands to the correct glyph. Of course, -%%% there are better ways, but that's the reality we have to cope with.) -%%% Instead of this special font we use the standard typewriter font. -%%% This has the further advantage that |cmtex10| may not be introduced -%%% to NFSS\@. - -%%% \beginprog -\def\CwebString{% - \hbox \bgroup - \tt - \cwbb@string_setup - \cwbb@string - } -\def\cwbb@string#1{% - #1\kern .05em - \egroup - } -%%% \endprog - - -%%% \sect Within strings certain cseqs have a special meaning; this is -%%% introduced by |\cwbb@string_setup|. The cseqs within strings are -%%% mostly special \TeX{} characters that are to be typeset by cseqs with -%%% the same name. - -%%% But a problem remains: active characters. They will still expand, and -%%% will mess up the string visualization. This is a particular problem -%%% with |german.sty| where the double quote is active. (Of course, that's -%%% a problem -- I'm German. :--) When one typesets strings, a double -%%% quote shall be typeset as double quotes, and must not expand to the -%%% special meaning. Remember that double quotes happen to appear quite -%%% often in strings. As the string argument is already tokenized, one has -%%% to redefine the binding of $(\textit{\textup{symbol}}\ \textbf{.}\ -%%% |#\"|)$. - -%%% \begin{fixme} -%%% Perhaps one might use a loop over all characters except the braces, -%%% and set their catcode to other. That would give us enough security. - -%%% For now, we handle only the double quote. -%%% \end{fixme} - -%%% Every once in a while we have discretionary breaks in a string, -%%% denoted by |\CwebStringBreak|. This break is shown with the C -%%% convention of escaped newlines. - -%%% \beginprog -\def\cwbb@string_setup{% - \chardef\ =`\ % % <-- two spaces ! - \chardef\&=`\& - \chardef\\=`\\ - \chardef\^=`\^ - \chardef\_=`\_ - \chardef\{=`\{ - \chardef\}=`\} - \chardef\~=`\~ - \catcode`\"=\CatOther - } - -\def\CwebStringBreak{\discretionary{\hbox{\tt\char`\\}}{}{}} -%%% \endprog - - -%%% \sect Numbers are typeset in different ways. We use the definition of -%%% Plain \cweb{}. -%%% % -%%% \begin{fixme} -%%% Should add a specification of the possible input and an explanation -%%% of the macros below. In particular, that the closing brace after -%%% |\aftergroup| is used much later is probably not grokked by most -%%% \TeX{} programmers. -%%% \end{fixme} - -%%% \beginprog -\def\cwbb@oct{\hbox{$^\circ$\kern-.1em\it\aftergroup\?\aftergroup}} -\def\cwbb@hex{\hbox{$^{\scriptscriptstyle\#}$\tt\aftergroup}} - -\def\CwebNumber#1{% % octal, hex, or decimal constant - \hbox{% - $% - \def\?{\kern.2em}% - \def\$##1{\egroup\sb{\,\rm##1}\bgroup}% suffix to constant - \def\_{\cdot 10^{\aftergroup}}% power of ten (via dirty trick) - \let\~\cwbb@oct \let\^\cwbb@hex - {#1}% - $}% - } -%%% \endprog - - -%%% \sect Comments are typeset in \TeX{} state. We add a hook, the user -%%% shall be able to change the layout (e.g., he might want another font). -%%% % -%%% \begin{fixme} -%%% Currently \C++ comments are typeset like C comments. This is -%%% horrible in usual circumstances, i.e., when complete blocks of text -%%% are prefixed with |//|. We should simply catenate all these text and -%%% typeset it as one paragraph, each line prefixed by |//|. But then we -%%% have to implement an |\everyline| first, and since that's not so -%%% easy we postpone it\,\dots -%%% \end{fixme} -%%% % -%%% In front of a C comment there is an optional stmt break, with 2\,quad -%%% in front if the line is not broken and 1.5\,quad if the line is broken. - -%%% \beginprog -\def\CwebComment#1{% - \5% % 0.5em will be discarded on line break - \hskip 1.5em - $/\ast\,$% - {\cwbb@tex - \CwebCommentHook - #1% - }% - $\,\ast/$% - } -\let\CwebCommentHook\relax -\let\CwebCxxComment\CwebComment -%%% \endprog - - - - - -%%% \chap \cweb{} tokens. - -%%% We distinguish three categories of \cweb{} tokens: (1) Those which -%%% output constant text, (2) those which have attributes to be displayed -%%% in a special way, and (3) those which start a new structure element, -%%% namely |@d| and~|@f|. Let's consider them in this order. - - -%%% \sect \cweb{} tokens which expand in a constant string are the -%%% identifier catenation operator~(`|@&|') and the macro placement -%%% directive~(`|@h|'). - -%%% \beginprog -\def\CwebIdCat{\CwebString{@\&}} -\def\CwebMacrosHere{% - \begingroup - \def\CwebRefNumber##1{}% - \CwebRefName :Preprocessor definitions\X - \endgroup - } -%%% \endprog - - -%%% \sect Verbatim program strings, i.e., strings passed verbatim by -%%% \ctangle{}~(`|@=|') are typeset like normal strings, but within a box. -%%% We use 2\,pt as the separating distance, this is set locally. - -%%% \beginprog -\def\CwebVerbString#1{{\fboxsep\tw@\p@ \fbox{\CwebString{#1}}}} -%%% \endprog - - -%%% \sect The refinement names are typeset in angles, this has a long -%%% tradition. We burry the typesetting of the chunk number (which is -%%% the first parameter) in a macro call; the user may change this to -%%% achieve special effects. -%%% % -%%% \begin{fixme} -%%% One could think about handling special values of the chunk numbers -%%% differently. E.g., an empty argument is not typeset at all, a~0 -%%% triggers a marginal note about a missing definition, etc. -%%% \end{fixme} - -%%% A refinement name may be typeset both in math and horizontal mode. -%%% The name itself is typeset in horizontal mode, of course; for the -%%% angles we need math mode. Therefore we assert at the start of the -%%% macro that we're not in math mode any more. At the end we switch back -%%% to math mode if we've started in it. This conditional switch from and -%%% back to math mode is done by |\cwbb@toggle_text|. - -%%% \TeX{}nical note: If we're in math mode |\cwbb@toggle_text| must be -%%% defined globally, as it will turn off math mode and the definition -%%% would be un-made then. The second invocation of |\cwbb@toggle_text| -%%% would be undefined then. - -%%% A refinement may also consist of the file name the expansion of this -%%% refinement shall be written to. -%%% % -%%% \label{sec:refname-dot} -%%% % -%%% This file name is tagged with |\.|, it shall be typeset like a string. -%%% But the user shall be able to use the dot accent in the refinement -%%% name as well. We check if the text consists solely of the tag and its -%%% argument; in this case we substitute |\.| with |\CwebString|. -%%% Otherwise we leave it as it is. Then a refinement name may not -%%% consist of a single dot-accented expression---well, that's highly -%%% unlikely. (Nevertheless I'll document it in the user's manual\,\dots) - -%%% \begin{fixme} -%%% One should be able to use |\EnsureMath| here. But the refinement -%%% name must not be set in math mode and must not be set in an hbox; -%%% the latter would prevent line breaks. -%%% \end{fixme} - -%%% \beginprog -\def\CwebRefName#1:#2\X{% - \ifmmode \gdef\cwbb@toggle_text{\null$\null}% - \else \let\cwbb@toggle_text\relax - \fi - \cwbb@toggle_text - $\langle\,${\cwbb@tex \cwbb@check_dot{#2}\CwebRefNumber{#1}}$\,\rangle$% - \cwbb@toggle_text - } -\def\CwebRefNumber#1{% - {\reset@font \footnotesize \kern .5em#1}% - } -%%% \endprog - - -%%% \sect The next macro, |\cwbb@check_dot| is a hassle to implement. We -%%% must check if it's argument consists solely of a `|\.|'~tag, together -%%% with the argument to this tag. Then the `|\.|'-argument shall be -%%% typeset like a string, |\.| itself must be ignored. - -%%% The check for |\.| must not evaluate the parameter. Especially |\PB| -%%% must not be evaluated within, it would lead to havoc with the -%%% redefinition of all bindings, etc. (At least that's the empirical -%%% result---it happened; although I don't know where the problems are. -%%% Anyhow, it wasn't in the specs of the rebinding process.) All other -%%% cseqs which shouldn't be used in moving arguments may cause problems -%%% here, too. Note that |\protect| is no solution here, the user often is -%%% not aware of the presence of \cweave{}-generated tags. As an example, -%%% consider the refinement \verb"@< local variables of |foo| @>|" which -%%% will lead to a call with the argument `|local variables of \PB{\\{foo}}|'. -%%% |\\| must not be evaluated here. - -%%% I use an approach where I hope that it will work---but to be honest, -%%% I'm not sure. I want to define a macro |\next| which shall have an -%%% empty expansion iff |#1| was a `|\.|'~tag with its argument. Empty -%%% refinement names are not allowed so we can assume that |#1| consists -%%% of at least one token. I evaluate the first token of |#1| before the -%%% |\def| is done. With an appropriate binding a |\.| will disappear, -%%% perhaps leaving an empty token list. I also take care that |\PB| is -%%% not evaluated then, by temporary rebinding it to |\relax|. Thereby I -%%% have taken care for all cseqs \cweave{} might have introduced at the -%%% very front of |#1|. Other cseqs are user-tags. If they cause -%%% problems, the user might circumstance them by adding |\protect|. - -%%% \beginprog -\def\cwbb@check_dot#1{% - \begingroup - \let\.\@gobble - \let\PB\relax - \expandafter\def \expandafter\next \expandafter{#1}% - \ifx \next\empty - \gdef\next##1{\CwebString}% - \else - \global\let\next\relax - \fi - \endgroup - \next #1% - } -%%% \endprog - - -%%% \sect \cweb{} macro definitions (done by~|@d|) and format directives are -%%% basically program text. When they are started we are already in -%%% program state, i.e., |\B| has appeared in front of it. But since we have -%%% an introductionary identifier (either |#define| or |format|) to set at -%%% the very front we increase the indentation by three units. - -%%% The output of format directives may be suppressed. Then we have to -%%% gather both identifiers that will appear after |\F|. Both of them -%%% consist of one group-token (a cseq and the identifier name), after -%%% each identifier one other token separates them. I.e., we have to -%%% gobble six group-tokens. As the very last token is |\par| if a format -%%% directive follows directly on another one, the definition must be -%%% long. - -%%% \TeX{}nical note: |\cwbb@format| must expand to |\CwebFormat|, not to -%%% its expansion. Otherwise a redefinition of |\CwebFormat| in a package -%%% would not be used. - -%%% \beginprog -\def\CwebDefine{\cwbb@macro{\#define}} -\def\CwebFormat{\cwbb@macro{format}} -\if@cweb@suppress@format@ - \long\def\cwbb@format#1#2#3#4#5#6{} -\else - \def\cwbb@format{\CwebFormat} -\fi - -\def\cwbb@macro#1{% - \global\advance\cwbb@indent \tw@\CwebIndentUnit - \cwbb@incr_indent - \CwebRes{#1 }% % <-- blank! - } -%%% \endprog - - - - -%%% \chap Refinement cross references and changes. - -%%% At the end of chunks with refinements, \cweave{} may output cross -%%% reference information: In which chunks additional definitions for -%%% this refinement are found, where this refinement is used, and where it -%%% is cited. This cross reference information is always introduced by a -%%% tag followed by a non-empty list of chunk numbers. Different tags -%%% are used for lists with only one element and for lists with more than -%%% one element, this way the introductionary text may be adapted. - -%%% Within a list of $n$~chunk numbers the first $n-1$~numbers are -%%% separated by commas with one following blank. The last two numbers -%%% are separated by |\ET| if~$n=2$, and by |\ETs| if~$n>2$. If a chunk -%%% is changed by the changefile, a changeflag~(`|\*|') is appended to -%%% its number. The list is eventually terminated by a full stop. - - -%%% \sect We separate the cross reference information by a smallskip from -%%% the refinement or from a previous cross reference information. The -%%% information itself is typeset in a smaller font, as it is auxilliary, -%%% inserted stuff. The number list has a hanging indentation of -%%% |\CwebNumberListHangindent|. But beware: This isn't a dimension -%%% register, it's a macro. This way one can use ems as dimensions. - -%%% The actual size change is represented by a macro. We will redefine it -%%% when we need an other size, e.g., in the lists at the end of the -%%% document. - -%%% We must assert that we're in CR state while we set a cross reference. - -%%% The first parameter of a cross reference information unit is the -%%% introductionary text, the second is the number list. The parameters -%%% must be evaluated in a group---local parameter changes therein must -%%% not influence the environment. - -%%% \beginprog -\def\CwebNumberListHangindent{2em} -\let\CwebCRSize\footnotesize -\def\CwebCrossRef#1#2.{% - \par\smallskip - \cwbb@CR - \begingroup - \reset@font \CwebCRSize - \noindent \hangindent\CwebNumberListHangindent\relax - #1~#2.\par - \endgroup - } -%%% \endprog - - -%%% \sect Well, let's define all introducing tags, which in fact start the -%%% cross reference information unit. The number list is gathered by -%%% |\CwebCrossRef|. - -%%% \beginprog -\def\CwebCRAlso{\CwebCrossRef{See also chunk}} -\def\CwebCRsAlso{\CwebCrossRef{See also chunks}} - -\def\CwebCRCite{\CwebCrossRef{This code is cited in chunk}} -\def\CwebCRsCite{\CwebCrossRef{This code is cited in chunks}} - -\def\CwebCRUse{\CwebCrossRef{This code is used in chunk}} -\def\CwebCRsUse{\CwebCrossRef{This code is used in chunks}} - -\def\CwebCREt{ and~} -\def\CwebCRsEt{, and~} -%%% \endprog - - - - -%%% \chap Bells and whistles. - -%%% \begin{fixme} -%%% Just copied from Plain \cweb{}. It doesn't work -%%% anyhow---|\char"|\ usually doesn't typeset the correct -%%% character. That's because this character is most probably an active -%%% character; at least that's typical for the way \TeX{} systems are -%%% used in Europe. I have to think about the implementation. -%%% \end{fixme} - -%%% \beginprog -\def\ATL{\par\noindent\bgroup\catcode`\_=12 \postATL} % print @l in limbo -\def\postATL#1 #2 {\bf letter \\{\uppercase{\char"#1}} - tangles as \tentex "#2"\egroup\par} -\def\noATL#1 #2 {} -\def\noatl{\let\ATL=\noATL} % suppress output from @l -%%% \endprog - - - -%%% \chap The end. - -%%% Well, after all we're finished with this module - -%%% \beginprog -\endinput -%%% \endprog - - -%%% -%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -%%% \vskip \PltxPreSectSkip - -%%% \rcsLogIntro{After the actual revision log of this module, we give an -%%% extract of log messages of the \cls{cweb} class. This module was -%%% extracted from revision~2.8 of that class, we present to you the -%%% log entries that concern the code of the new module.} - -%%% \begin{rcslog} -%%% $StyleLog: cwebbase.doc,v $ -%%% \Revision 1.4 1995/11/07 17:55:19 schrod -%%% \LaTeX{} \cweb{} should work at least with the last two \LaTeX{} -%%% versions; make it work with the previous-to-last one, version -%%% \mbox{$\langle$1994/12/01$\rangle$}. For that, one has to install the -%%% \mbox{$\langle$1995/06/01$\rangle$} (non-outer) definition of -%%% |\newif|, and |\hb@xt@| must not be used.\\ -%%% Problem reported by Laurent Desnogues -%%% \path|| and somebody else (XXX -%%% -- add name). - -%%% \Revision 1.3 1995/11/07 14:13:12 schrod -%%% Reset section numbers when higher-level section begins.\\ -%%% Error reported by Bronne Louis \path||. - -%%% \Revision 1.2 1995/11/06 10:58:47 schrod -%%% Support active double quotes in strings. That happens when -%%% |german.sty| is used. Problems with other active characters may still -%%% appear. - -%%% \Revision 1.1 1995/09/12 23:02:22 schrod -%%% Moved all code that does the actual typesetting of \cweave{} tags and -%%% is therefore also needed for a |cweb| environment. It's now an own -%%% module named \pkg{cwebbase}. - -%%% Chunk markers and chunk marginal numbers don't hang below the -%%% baseline any more. - - -%%% \item[] \noindent\hrulefill\break -%%% \textbf{Extract of the revision log for |cweb.doc|:} - -%%% \vskip 2ex - -%%% \Revision 2.5 1995/08/29 02:07:26 schrod -%%% Discard dependencies on 10\,pt fonts. - -%%% Support suppression of format directives. - -%%% \Revision 2.4 1995/08/27 19:31:43 schrod -%%% Make configuration of change flag easier. - -%%% Put section title of changed chunks list in marks, and tell the user -%%% that it got typeset. - -%%% \Revision 2.3 1995/08/27 17:24:46 schrod -%%% Make usage of baseclass with chapters work. - -%%% \Revision 2.2 1995/08/27 13:26:22 schrod -%%% Add possibility to suppress change hints. - -%%% \Revision 2.1 1995/08/25 19:11:18 schrod -%%% Hierarchic structures are supported now, in addition to the flat -%%% structure of the beta-test version. One can choose with an option. For -%%% that step, the terminology was cleaned up, too: Chunks are not named -%%% sections any more. (That change involved reimplementation of almost -%%% all the structure and toc stuff.) - -%%% The chunk number supplied by \cweave{} is used now, not some computed -%%% number. Change flags are printed, too. - -%%% One can suppress output of unchanged sections. - -%%% \Revision 1.12 1993/08/10 14:15:43 schrod -%%% New page on main section only if group level $<$ |\cwebSecNoEject|. -%%% Default for the latter is 3. - -%%% \Revision 1.11 1993/08/10 11:21:07 schrod -%%% Reference to section number does not render a period after the -%%% number any more. - -%%% \Revision 1.10 1993/08/09 20:08:20 schrod -%%% |\cweb@cweave_bindings| is now a no-op if \cweave{} bindings are in -%%% effect already.\\ -%%% (Problem reported by Michael M\"uller \path||.) - -%%% \Revision 1.9 1993/08/09 18:05:28 schrod -%%% Left shift operator wasn't defined correctly.\\ -%%% (Problem reported by Michael M\"uller \path||.) - -%%% \Revision 1.6 1993/06/15 08:49:23 schrod -%%% |\cweb@check_dot| must not evaluate its argument in an |\edef|, this -%%% causes problems if a |\PB| is within. Now I try hard not to evaluate any -%%% tokens outside of my control. - -%%% Can use |\@defpar| for an empty line in |\cweb@has_entries|, don't -%%% need an own macro. - -%%% \Revision 1.4 1993/06/14 15:54:18 schrod -%%% Add FSA diagram about processing states. CR state is also switched -%%% to from \TeX{} state (that happens with |\ch| at the document end). - -%%% \Revision 1.3 1993/05/13 17:51:21 schrod -%%% Refinements may also be filenames (`|@(|'). Then the complete name -%%% consists of a |\.| macro call, which is handled now.\\ -%%% (Problem reported by Michael M\"uller \path||.) - -%%% Made the detection of `|@.|' index entries more robust. - -%%% \Revision 1.2 1993/05/12 18:28:59 schrod -%%% Adapted to recent changes of \cweave{} (of April 93): - -%%% Main sections have a group level, represented in the table of -%%% contents. This changed the complete implementation of section tags. - -%%% New C token cseqs: |\Z| and |\MRL|, implemented as |\CwebLe| and -%%% |\CwebCombinedOp|. - -%%% \Revision 1.1 1993/04/09 15:00:37 schrod -%%% Initial revision - -%%% \end{rcslog} - - - -%%% \end{document} - - -%%% -%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%% Local Variables: -%%% mode: LaTeX -%%% TeX-brace-indent-level: 4 -%%% indent-tabs-mode: t -%%% TeX-auto-untabify: nil -%%% TeX-auto-regexp-list: LaTeX-auto-regexp-list -%%% compile-command: "make cwebbase.tex" -%%% End: -- cgit v1.2.3