From b4fc5f639874db951177ec539299d20908adb654 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Mon, 9 Jan 2006 00:44:40 +0000 Subject: doc 4 git-svn-id: svn://tug.org/texlive/trunk@80 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/latex/apa/README | 24 ++ Master/texmf-dist/doc/latex/apa/apacls.txt | 284 ++++++++++++++++++++++ Master/texmf-dist/doc/latex/apa/apaenum.txt | 60 +++++ Master/texmf-dist/doc/latex/apa/examples.txt | 351 +++++++++++++++++++++++++++ 4 files changed, 719 insertions(+) create mode 100644 Master/texmf-dist/doc/latex/apa/README create mode 100644 Master/texmf-dist/doc/latex/apa/apacls.txt create mode 100644 Master/texmf-dist/doc/latex/apa/apaenum.txt create mode 100644 Master/texmf-dist/doc/latex/apa/examples.txt (limited to 'Master/texmf-dist/doc/latex/apa') diff --git a/Master/texmf-dist/doc/latex/apa/README b/Master/texmf-dist/doc/latex/apa/README new file mode 100644 index 00000000000..e629e11b5bd --- /dev/null +++ b/Master/texmf-dist/doc/latex/apa/README @@ -0,0 +1,24 @@ + +apa.cls is a LaTeX2e class file that makes your document conform to +the APA Publication Manual (Fifth Edition, 2001) specifications for +manuscripts or to the APA journal look found in journals like the +Journal of Experimental Psychology etc. In addition, it provides a +regular LaTeX-like output with a few enhancements and APA-motivated +changes. + +This is a document *class* which uses (and modifies) some packages to +achieve strictly defined formatting results and also uses the apacite +package (sty & bst) for citations and references. If you only want +APA-like citation for other kinds of documents (e.g., a thesis) use +apacite.sty with an appropriate class. + +In order to use this document class you need some packages that may +not be present in your LaTeX distribution. Please read apacls.txt +carefully to understand what you need to install and what is possible +with apa.cls, then read examples.txt carefully to understand how to +use apa.cls (macros and instructions). + +Athanassios Protopapas +protopap@ilsp.gr +August 2002 + diff --git a/Master/texmf-dist/doc/latex/apa/apacls.txt b/Master/texmf-dist/doc/latex/apa/apacls.txt new file mode 100644 index 00000000000..c05f8ae7b00 --- /dev/null +++ b/Master/texmf-dist/doc/latex/apa/apacls.txt @@ -0,0 +1,284 @@ +This is file apacls.txt, which contains instructions for using the +APA LaTeX2e class file apa.cls + + Athanassios Protopapas ******* Version 1.3.0 August 2002 + + +Introduction + + apa.cls is a LaTeX2e class file that makes your document conform to + the APA Publication Manual (Fifth Edition, 2002) specifications for + manuscripts or to the APA journal look found in journals like the + Journal of Experimental Psychology etc. In addition, it provides a + regular LaTeX-like output with a few enhancements and APA-motivated + changes. The headings and enumeration/seriation code is taken from + theapa.sty by Young U. Ryu. + + +Description + + a) Manuscript mode (man) + + apa.cls typesets a title page, abstract page, text body, then + references, author notes, footnotes, tables, figure captions, and + figures. All text is double spaced. The title page contains + (centered) the title, author name, affiliation, short title, and the + running head (automatically capitalized). A note is inserted in + place of each table and figure in the text. + + The title is printed as a heading at the beginning of the text (don't + include an extra \section, because the introduction is not supposed + to be titled in printed articles). \leftheader is ignored in + manuscript mode. The contents of \note are printed under the author + names and affiliations, typically the date of submission. The "Author + Notes" page contains the contents of \acknowledgements. A footnote + page is only produced if there is at least one footnote in the text. + + b) Journal mode (jou) + + apa.cls typesets the text in double-sided, double column format, with + an appropriately centered title, author names, affiliations, note, + and abstract. The contents of acknowledgements are printed as + footnotes in a box at the lower left corner of the first page. + Journal-like headers can also be produced on the first page. + Dimensions and overall "look" are modeled after JEP:HPP. The purpose + of this mode is to produce readable and reasonably condensed output + for double-sided xeroxing and distribution. + + c) Document mode (doc) + + apa.cls typesets the text in single-sided, single-column format, with + an appropriately centered title, author names, affiliations, note, + and abstract on the first page. The contents of acknowledgements are + printed at the bottom of the first page. Section headings and + enumeration follow the APA guidelines and floats (figures and tables) + are inserted in the text where they are defined, as in regular LaTeX + articles. + + The purpose of this format is to provide hardcopies during the + development of articles that are later going to be submitted (using + the manuscript format) and distrubuted (using the journal + format). The advantage over using a regular article class is that all + the extra definitions are supported and no changes need thus be made + to the text other than the format parameter. + + +Known bugs and restrictions: + + - Up to four affiliations (for article author(s)) are supported. + - There seems to be an incompatibility between apacite and babel. + Since apacite is necessary, you may not be able to use babel. + - No provision for A4 paper. See examples for a workaround. + + +Other necessary files: + + For all modes you need apacite.sty and apacite.bst. + + For manuscript mode, you need endnotes.sty and endfloat.sty + + For journal mode, you need, optionally, pslatex.sty (or times.sty and + mathptm.sty), ftnright.sty, fancyhdr.sty (for first page headers), + and flushend.sty + + +To use this class, include one of the following + + \documentclass[jou]{apa} for the two-column output (Times-Roman default) + \documentclass[man}{apa} for the manuscript (double-spaced) output + \documentclass[doc]{apa} for regular document (in computer modern) + + at the beginning of your file (instead of {article}), then define the + title, author, etc. (see below), and start with + + \maketitle + + right after \begin{document}, immediately followed by the first + paragraph of you text (no blank line). Do not use a + \bibliographystyle command, because apacite is selected automatically + (for backwards compatibility, any existing \bibliographystyle command + is ignored and a warning is issued). + + The journal format uses Times Roman by default (it does look like + published after all); if you don't have pslatex.sty or times.sty, or + if you just prefer computer modern, add notimes after the jou option + in the class line: \documentclass[jou,notimes]{apa} (notimes has no + effect in modes other than jou and may be left in when switching) + + Manuscript format uses Computer Modern by default but can use + Helvetica or typewriter look by using the options helv or tt, + respectively. I find the result with either of these much more + "manuscript"-like but that's a matter of taste. These options have + no effect in modes other than man and may be left in when switching. + + +The following commands are defined and should/may be used: + + 1. Required for document compilation + + \title{Title} + \author{Author Name(s)} + or \twoauthors{First Author(s)}{Second Author(s)} + or \threeauthors{John and Jim}{Mary and Sue}{Nick} + or \fourauthors{Helen}{Dick}{Tracy and Larry}{James Bond} + \affiliation{Department\\ University} + or \twoaffiliations{Affiliation of 1st Author(s)}{Affil. of 2nd Author(s)} + or \threeaffiliations{U of A}{U of B}{U of C} + or \fouraffiliations{My Company}{Your Department}{Heaven}{Earth} + + \maketitle % right after \begin{document} + + 2. Strongly recommended (required by APA) + + \abstract{Abstract} + \acknowledgements{Author notes etc.} + \rightheader{Running head} % defaults to title + \shorttitle{Short title} % defaults to title + \leftheader{Authors} % defaults to author + + 3. Optional, possibly helpful + + \note{Draft/submission date, etc.} % To add notes on first page + \thickline % Use in tables for the top line + \centeredcaption{width}{caption-text} % Used with double-column figures + % to create centered captions + % narrower than \textwidth + + \fitfigure[optional-height]{eps-filename} % Automatically fit a postscript + % figure; load graphicx and use + % instead of \includegraphics + \fitbitmap[optional-height]{eps-filename} % Same as \fitfigure but won't scale + % figure in man mode for best + % reproduction of bitmap figures + + \ifapamode{man-code}{jou-code}{doc-code} % Do different things depending on + \ifapamodeman{man-mode-code}{doc-or-jou-code} % mode---you shouldn't have to use + \ifapamodejou{jou-mode-code}{doc-or-man-code} % any of these but they're here if + \ifapamodedoc{doc-mode-code}{man-or-jou-code} % you want them. Parameters can + % be left empty to do nothing + + \journal{Journal name or other note} % Top left header on page one in + % jou/doc mode, ignored in man mode + \volume{Volume, number, pages} % Top left, under content of \journal + \ccoppy{Copyright notice etc.} % Top right header in jou/doc p. 1 + \copnum{Your hovercraft is full of eels} % Top right, under content of \ccoppy + + \tabfnm{a} % Put a note mark inside a table cell + \tabfnt{a}{Note text} % Put the mark and text for a table note + \apavector{A} % Format a symbol as vector by APA rules + \appendix % Standard LaTeX usage, starts off + % appendix section(s) + + +The following options are available: + + These options must be combined with one of jou, man, doc. + + notimes : Effective in jou mode, cancels loading pslatex (or times) and + uses computer modern fonts. + nosf : Effective in man mode, neutralizes the \helvetica command. + fignum : Effective in man mode, adds figure numbering to the figure pages. + Makes it easier to refer to figures and I recommend it for the + reviewers' copies, but for the original figures you need to have + them printed without this and write the number with pencil on the back. + notab : Effective in jou mode, cancels the automatic stretching of tabular + environments to the width of their enclosing float. + nobf : Effective in man mode, turns off boldface in section headers + helv : Effective in man mode, uses Helvetica as the base typeface + tt : Effective in man mode, uses a typewriter base typeface + longtable: Only usable in man mode, loads longtable.sty if you *really* must + use long tables in your manuscript. See special note below + floatmark: Effective in man mode, inserts placeholders for floats in text + ("Insert Figure X about here" -- no longer required by APA) + +Notes on usage: + + If there is more than one author but all in the same department, use + the \author command with all names and the \affiliation command. If + there are people from two different departments, use the \twoauthors + and \twoaffiliations commands to group them appropriately. For three + affiliations use \threeauthors and \threeaffiliations, and guess what + for four. + + Default sectioning maps \section, \subsection, and \subsubsection to + the three-level heading definitions of the APA manual. If you need + more/fewer heading levels, you can use the command + \headinglevels{four} (or any number between one and five---spelled + out---instead of four) and then use \paragraph and \subparagraph for + the lower-level sectioning. Don't bother to \label your sections + because they can't be \ref'd since they are not numbered in APA style. + + When a figure is too wide for a single column, use a double-column + figure (\begin and \end {figure*} instead of {figure}). When using + double column figures, it looks better if you use \centeredcaption + instead of caption, with the first parameter about equal to the width + of the float (table or figure). This makes no difference in + manuscript mode. + + It is still *your* responsibility to format the tables in accordance + with the APA guidelines (e.g., no vertical lines, and so on) and + precede the actual table body with its caption (i.e., use \caption + *before* \begin{tabular} in tables, or the results won't be + conforming to the APA requirements for tables). Because a paragraph + break is inserted in manuscript mode (along with the "insert + table/figure" note), don't define tables in the middle of a + paragraph. + + Remember to use \label for floats *after* the caption (and not inside it!) + + For instructions on using the various citation forms get apacite.tex, + testAPA.tex, and readme.apa from the CTAN mirror near you. For + instruction on using APA enumeration and seriation read apaenum.txt + in this distribution. + + If you need to use additional options for article.cls, use them with + the apa.cls options and they will be automatically passed along to + article.cls + + Notes in tables: There is a semi-automatic way to include notes in + tables such as, for example, to indicate levels of significance. The + command \tabfnm{X} inside a table cell (tabular environment) produces + the note mark. Use \tabfnt{X}{Note text} immediately before or after + \end{tabular} inside the table environment to produce the note text. + See example file. + + Appendices: Use the command \appendix only once, at the point where + your (first) appendix starts. Then use \section{Appendix Title} to + start each appendix section (even if there is only one). You may use + cross-references to appendixes, because they are numbered, if there + are more than one. The command \label{app:xxx} after the appendix + \section sets the label. Refer to it with "Appendix~\ref{app:xxx}" + anywhere in the article. + + If you use vectors, the command \apavector{X} will make your life easier. + + Long tables: By popular demand, longtable now (sort of) works with + apa.cls. You must *not* load the longtable package yourself; + instead, pass the longtable option to apa.cls (due to precedence + requirements for proper endfloat function and cross-definitions). + Since longtable only works in single-column documents it can only be + used with man mode. Unfortunately the ifapamode commands won't work + to keep a single table body and apply a mode-specific (table or + longtable) environment because of illegal cross-nesting with + environment begin/end. In fact the table environment won't even work + inside in ifapamode argument, which makes it impossible to have a + single file that can be processed for both man and jou. This defeats + the purpose of apa.cls, so only resort to longtable if you absolutely + have to. You will need the supplied endfloat.cfg to use it. + + +Feedback: + + Send me comments or bug reports (preferably with fixes) at: + protopap@ilsp.gr + + +Example of usage: + + See file examples.txt... + PLEASE, read file examples.txt, it will probably solve your problems. + + +Thanassi Protopapas +August 30, 2002 + diff --git a/Master/texmf-dist/doc/latex/apa/apaenum.txt b/Master/texmf-dist/doc/latex/apa/apaenum.txt new file mode 100644 index 00000000000..d6a46107577 --- /dev/null +++ b/Master/texmf-dist/doc/latex/apa/apaenum.txt @@ -0,0 +1,60 @@ + +This file contains instructions on using APA seriation and enumeration. + +%$$$ theapa.sty $$$ --- Version 2.5 .1(May 1992) +% by Young U. Ryu (young@emx.utexas.edu) + +% [6] APA Seriations +% +% A. seriate environment: +% For example, the following: +% +% Blah blah blah +% \begin{seriate} +% \item first item, +% \item second item. +% \end{seriate} +% Blah blah blah +% +% results in: +% +% Blah blah blah (a) first item, (b) second item. Blah blah blah +% +% B. APAenumerate environment +% For example, the following: +% +% Blah blah blah +% \begin{APAenumerate} +% \item first item ... ... ... continue continue +% \item second item ... ... ... continue continue +% \end{APAenumerate} +% Blah blah blah +% +% results in: +% +% Blah blah blah +% 1. first item ... ... ... +% continue continue +% 2. second item ... ... ... +% continue continue +% Blah blah blah +% +% C. APAitemize environment +% For example, the following: +% +% Blah blah blah +% \begin{APAitemize} +% \item first item ... ... ... continue continue +% \item second item ... ... ... continue continue +% \end{APAitemize} +% Blah blah blah +% +% results in: +% +% Blah blah blah +% o first item ... ... ... +% continue continue +% o second item ... ... ... +% continue continue +% Blah blah blah +% diff --git a/Master/texmf-dist/doc/latex/apa/examples.txt b/Master/texmf-dist/doc/latex/apa/examples.txt new file mode 100644 index 00000000000..d8600da334a --- /dev/null +++ b/Master/texmf-dist/doc/latex/apa/examples.txt @@ -0,0 +1,351 @@ +% +% Athanassios Protopapas, August 2002 +% Examples for using apa.cls v1.3.0 +% +% This file contains examples of using the commands defined in apa.cls +% It is not recommended that you use this as a sample document because +% of its very short length, which makes for very awkward formatting. +% In fact this file will not compile because of the commands that +% are embedded in the text (unescaped backslashes all over the place) +% Just use the examples of the commands you need. +% +% The class command goes at the top +% +\documentclass[fignum,jou]{apa} +% +% Change jou to man/doc for the other modes: +% +%\documentclass[fignum,man]{apa} +%\documentclass[fignum,doc]{apa} +% +% Here's what I use: +%\documentclass[nobf,fignum,tt,man]{apa} +% +% If you have postscript graphics to include, load the graphicx package +% +\usepackage{graphicx} +% +% Define the various headings, names, and other required stuff +% +\title{Sample Title} +\twoauthors{Myself Author}{Second Author and Some Friend} +\twoaffiliations{My Department\\ Address ZIP}{The other place\\ Elsewhere} +\abstract{Text of the abstract} +\acknowledgements{Thanks to people and grants, and your new address maybe.} +\shorttitle{Short Title as per APA manual} +\rightheader{Odd-Numbered Page Header} +\leftheader{Even-Numbered Page Header} +% +% Optionally, for keeping track of stuff: +%\note{Draft of \today} +% +% John Vokey uses something like this +\ifapamodeman{% +\note{\begin{flushleft} + Dr.\ Your Whole Name\\ + Department of Psychology\\ + At Some University\\ + Some City, Some Province or State\\ + Country Postal Code\\ + e-mail: name@someu.ca\\ + fax: (area)exchange-number + \end{flushleft}}} +{% else, i.e., in jou and doc mode +\note{Draft of \today}} +% +% If you use A4 paper and care to make a point of it in man mode, +% use this, courtesy of John Vokey: +%\ifapamodeman{\setlength{\textwidth}{5.76772in}% +% \setlength{\textheight}{9.19291in}}{} +% +% Optional journal-like looking headers +% +\journal{Journal of nothing}\volume{First and Last Volume} +\ccoppy{Copyright 2002 by Myself}\copnum{Some serial number} +% +% End of definitions, begin document with title and then main text +% +\begin{document} +\maketitle %% First thing after \begin{document} +Here goes the text of the article. %% Start immediately after \maketitle + %% no blank line between title & text + +You can have some text appear differently in each mode, or only appear +in some mode(s). You can also modify the appearance of tables, +figures, or equations between modes of compilation. Here's an +unexciting example: + +\ifapamodeman{This is printed in man mode only}{This is not man mode}. +You can also use the three-way switch: the current mode is +\ifapamode{man}{jou}{doc}. + +Sectioning commands are used as in regular \LaTeX. It is very +important that you use these sectioning commands. Here's a typical +example for an experimental psychology paper, following the (untitled) +introductory section: + +\section{Experiment 1} +Introduction to this experiment. When referring to it, type +Experiment~1 (with capital E and a tie to the number so they won't +separate). However, when mentioning the first experiment the ``e'' is +lowercase. +\subsection{Method} +You may need some general remarks on method here. Then use the standard parts. +\subsubsection{Subjects} +Description of subjects. +\subsubsection{Apparatus} +Sometimes it is necessary to give the apparatus a special section. +\subsubsection{Stimuli} +What the subjects saw, heard, or felt. +\subsubsection{Procedure} +What happened to the poor subjects. +\subsection{Results} +Now the numbers: What your measurements showed and all the statistics of it. +\subsection{Discussion} +If your results mean anything, this is the place to talk about it. In case +there is little to discuss before the final section (e.g., \section{General +Discussion} at the end) you may combine results and discussion in a single +\subsection{Results and Discussion} before you go on to the next +\section{Experiment 2} +and so on. + +In case you have more than these three levels of headings +(sectioning), you can use the command \headinglevels (e.g., +\headinglevels{four} for four levels). See the APA manual for how to +handle more or fewer heading levels (the appearance is, naturally, +taken care of by apa.cls and you only need concern yourself with the +conceptual divisions). In case of more than three levels you'll need +the \paragraph (for the fourth level) and \subparagraph (for the fifth +level) sectioning commands of \LaTeX. + +\section{Floating things} +\subsection{Figures} +A figure can be included in any way you like, but this class provides +a way to deal automatically with fitting encapsulated postscript (EPS) +files without worrying about dimensions or mode. Start your figure or +figure* environment as usual (see the LaTeX book) and then instead of +\epsfig or \includegraphics use the new command \fitfigure: + +An example of a figure that loads a postscript file. You can use the +t and b options for selectively putting a figure at the top or bottom +of a page. Always include p after t or b so that you won't risk +running out of space if a figure is too big. The h option for +inserted figures is not recommended because it's not used in APA +journals. Don't forget \usepackage{graphicx} in your preamble! +--- not epsfig, not graphics. + +\begin{figure}[tp] +\fitfigure{fig1} %% You could use {fig1.eps} here but see note below +\caption{This is the caption of the figure.} +\label{fig:fig1} +\end{figure} + +There is absolutely no reason to complicate your figures any further +than this simple example. Just insert your nice and descriptive +caption text and the filename. If you omit the .eps extension for the +filename (as in the example), then if you happen to use pdflatex it +will automatically load the corresponding .pdf graphic file (assuming +you have made one with eps2pdf), while "regular" dvips will load the +.eps file. + +At any point in the text, before or after the figure, you can +automatically refer to it with the \ref command, for example we can +refer to the above figure as Figure~\ref{fig:fig1}, where the tilde +keeps the word ``Figure'' (which is capitalized according to APA +instructions) together with the reference number. Use names that are +easy to remember instead of ``fig1'' ! + +Always put the \label command after (and outside) \caption, otherwise +you'll run into trouble with the man mode not finding any labels to +refer to. + +\subsubsection{Bitmaps} +In case of a bitmap eps (as opposed to a graph or line drawing), you +probably don't want it scaled in man mode, for best reproduction, so +use \fitbitmap instead: + +\begin{figure}[tp] +\fitbitmap{bm1.eps} %% .eps not necessary -- see note above +\caption{This is the caption of the figure.} +\label{fig:fig2} +\end{figure} + +\subsection{Tables} +What about a table? Well, mostly no change from what you are used +to, except that you can use \thickline for the top separator +to match the APA-journal look. Here's an example: + +\begin{table}[tbp] +\caption{Some numbers that could be experimental data.} +\label{tab:tab1} +\begin{tabular}{lcc}\thickline + & \multicolumn{2}{c}{Factor 2} \\ \cline{2-3} +Factor 1 & Condition~A & Condition~B \\ \hline +First & 586 (231) & 649 (255) \\ + & 2.2 & 7.5\tabfnm{a}\\ +Second & 590 (195) & 623 (231) \\ + & 2.8 & 2.5\tabfnm{b}\\ \hline +\end{tabular} +\tabfnt{a}{Notes to table material are easy.} +\tabfnt{b}{Use as many as you like, just remember to number them.} +\end{table} + +In case your data won't fit in a single column (in jou mode) use a +wide table (environment table* instead of table). Here's an example: + +\begin{table*}[tbp] +\caption{Some more numbers that could be experimental data and are +the same as the previous ones, only more of them.} +\label{tab:tab2} +\begin{tabular}{lccccc}\thickline + & \multicolumn{5}{c}{Factor 2} \\ \cline{2-6} +Factor 1 & Condition~A & Condition~B & Condition~C & Condition~D & Condition~E \\ \hline +First & 586 (231) & 649 (255) & 586 (231) & 649 (255) & 586 (231) \\ + & 2.2 & 7.5 & 2.2 & 7.5 & 2.2 \\ +Second & 590 (195) & 623 (231) & 590 (195) & 623 (231) & 590 (195) \\ + & 2.8 & 2.5 & 2.8 & 2.5 & 2.8 \\ \hline +\end{tabular} +\end{table*} + +You can get as fancy as you want with tables, just remember not to use +any vertical lines, and to group columns with \cline when they are +described by a common header (using \multicolumn). There's rarely a +need to get more complicated than these examples. Avoid nesting +tabular environments, it's a mess and you'll have to use the notab +option to make it work (so that internal tabulars don't stretch to the +line width). Be creative with \multicolumn instead. + +Use figure* instead of figure for figures that are too wide to +fit comfortably in a single column. + +\section{Section Header} +More text can go here.\footnote{And this is a footnote, used in just +the regular LaTeX way} + +Suppose this is the end of our document, and there are appendices. +Remember, appendices come *after* the bibliography. But there's no +text between the bibliography and the appendix part. Don't use +a \bibliographystyle because apa.cls automatically loads apacite. + +\bibliography{mybibfile} + +% Now the appendices. First we have to signal the pass into the +% appendix part. Then you'll have to give each appendix a title +% thinking of it as a section. + +\appendix %% Just like that, in LaTeX spirit. No parameters or titles. + +\section{Title of first Appendix} +This is the text of the first appendix. You can present your +mathematical derivations, raw materials, or whatever. You are free to +use figures and tables in the usual way. apa.cls will number them +correctly and include them in the table and figure lists where they +belong. Isn't apa.cls wonderful? + +\section{List of stimuli} +Just to show that another appendix is really just another section. +Also, it's a good opportunity to show how longtable should be used. +Remember, you must include the longtable option with the apa class if +you need to use longtable. Also, remember, it only works in man mode. + +\begin{longtable}{lcc} +\caption{One sample caption for the sample long table.} +\label{tab:ltab} +\\ \thickline + & \multicolumn{2}{c}{Type} \\ \cline{2-3} +Condition & Cond-A & Cond-B \\ \hline +\endfirsthead +\\ \thickline + & \multicolumn{2}{c}{Type} \\ \cline{2-3} +Condition & Cond-A & Cond-B \\ \hline +\endhead +\endfoot +\thickline +\endlastfoot +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +Cond-A & Stim-1 & Stim-2 \\ + & 1.0 & 2.0 \\ +Cond-B & Stim-3 & Stim-4 \\ + & 3.0 & 4.0 \\ \hline +\end{longtable} + +\end{document} -- cgit v1.2.3