From aea330a2bc712291777bdb4bf73fe68b594227ff Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Sat, 28 Jul 2007 00:27:44 +0000 Subject: new pstricks package pst-optexp git-svn-id: svn://tug.org/texlive/trunk@4671 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/generic/pst-optexp/README | 14 + .../doc/generic/pst-optexp/doc/parque-nacional.eps | 286 ++++++++ .../doc/generic/pst-optexp/doc/pst-optexp-doc.pdf | Bin 0 -> 259301 bytes .../doc/generic/pst-optexp/doc/pst-optexp-doc.tex | 726 +++++++++++++++++++++ 4 files changed, 1026 insertions(+) create mode 100644 Master/texmf-dist/doc/generic/pst-optexp/README create mode 100644 Master/texmf-dist/doc/generic/pst-optexp/doc/parque-nacional.eps create mode 100644 Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.pdf create mode 100644 Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.tex (limited to 'Master/texmf-dist/doc/generic') diff --git a/Master/texmf-dist/doc/generic/pst-optexp/README b/Master/texmf-dist/doc/generic/pst-optexp/README new file mode 100644 index 00000000000..742e2d4d270 --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-optexp/README @@ -0,0 +1,14 @@ +The package pst-optexp is a collection of optical components +that facilitate easy sketching of optical experimental +setups. Mechanisms for proper alignment of different components are +provided internally. This way the user does not have to care for proper +orientation of the elements. + +This is version 1.0, the first official release. + +This material is subject to the LaTeX Project Public License. +See http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html +for the details of that license. + +-- +Christoph Bersch 2007/7/18 diff --git a/Master/texmf-dist/doc/generic/pst-optexp/doc/parque-nacional.eps b/Master/texmf-dist/doc/generic/pst-optexp/doc/parque-nacional.eps new file mode 100644 index 00000000000..9576fcfe18a --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-optexp/doc/parque-nacional.eps @@ -0,0 +1,286 @@ +%!PS-Adobe-3.0 EPSF-3.0 +%%Creator: jpeg2ps V1.9 by Thomas Merz +%%Title: parque-nacional.jpg +%%CreationDate: Thu Jun 16 20:16:59 2005 +%%BoundingBox: 20 20 173 176 +%%DocumentData: Clean7Bit +%%LanguageLevel: 2 +%%EndComments +%%BeginProlog +%%EndProlog +%%Page: 1 1 +/languagelevel where {pop languagelevel 2 lt}{true} ifelse { + (JPEG file 'parque-nacional.jpg' needs PostScript Level 2!\n) dup print flush + /Helvetica findfont 20 scalefont setfont 100 100 moveto show showpage stop +} if +save +/RawData currentfile /ASCII85Decode filter def +/Data RawData << >> /DCTDecode filter def +20 20 translate +152.64 155.52 scale +/DeviceRGB setcolorspace +{ << /ImageType 1 + /Width 212 + /Height 216 + /ImageMatrix [ 212 0 0 -216 0 216 ] + /DataSource Data + /BitsPerComponent 8 + /Decode [0 1 0 1 0 1] + >> image + Data closefile + RawData flushfile + showpage + restore +} exec +s4IA0!"_al8O`[\![LbIS[utmW+pLKbgIj#Umkd]=W=Y>Q6Op+D/T;\oX5dX<,'8Uf9U^ +O$OnX=eS$OM,T@1O+HIQ&?S\r.:\IUs4SMeVHdCR!c&5'akOl*BmF\&.Lk1CmHJ,FeTPa3>[E$p6eZ/^:R+ +rCR[N(hH@8Q;7U0AfusH-Zu8kj73i$,9ok+SE7!(5X,1!-#i5UArOp$-=phe>deN +k3>+k.M^qd:I!-GuX8YZ[pdP2_P>2j"@5fe,ihmJNYcCo@)!t[[07WV$aMmisJFn;MM""J9MbUf0/Y2Y">lrSpAJT8m +[gf#$+ke\R6?X<2"+'IuJ,"DAVg\aYt)Q%SlU8"XQ]bU-Kr-&A*1*]qPQqg&D&/F +-C;C&"+3aDPq)Z==LtqOHleGgJ#2,OE"a%^4a`j7o:b!fN+;kV=rc6SL:jt[=Wp' +m@Y6(9i$EkWa"gPkIVo"=siOYDO$]BPUBmhi!n^B0/%$;/9`@X4j11l,D1DL +Ia*,W_KL4bBMP*.[&PC$WSn(o4`NB3b0k.<,u/DC>09AIs@H>?nAY-tgo)OpXT>j +U*#8gS>@PH&3E/@C&:aTsfVT[kGS"i; +% +B[Q)9W/[SW;F6jegX"76o]iFH5M43E4Z]2.rK\@cOuB>WM8MOok9_TK[[IUa"27j +7F?p<`60V6U]i;m7kLO%Oe;kG%D3lW8tf+%V)\#I&qSdhXH\q)HYIQ[T^ds,f*g1 +](A#%2[gq +>;g1sI/M[aUX^ne>)AU@u..naV:A.pJEa1G2O3D(Ou+=Ak6i'5bB8I?!6`SXg@?' +m:a@N4:[Rg(rWA6]'$OpC[eanaM@VW^TftD8dgc7>I*"O#W%=K.&th_bTaf(07AV +Eg4'_ZPr7^fd]QW!#tc&Up^rUDN81Fm;5RUO7[LaX(XB6ICl2Ja`L*&[Bho]_U?O +X]iM/G$<'Fj(0b"DnVr,UlX7cC%__o0se-@Z_FcJ/\q9,b"pfp7_L4R9iWX-&m +0TR^=/"H8d`]s%fL]U`.X[2>!d38DFhFu=F;DQ;H-,sX*o)u_bQ;mG2JZY>Dg^4< +bE,TH#*!GX:D['`MB;uDI'!\W,79?\Hi1_JCC\#0WnF&dDk:V-;J0a)cBq)VosUn +are(ho`0m\Ddh[lu0=WUk&''khr1':R860m4R_E`$MuNcj8$!C>]#Rjs@ +9gj&g99ZG00dk%!'qHfa[f%$Ai_rUOH)r&Rigqso14S+b]?V/-*ZSicd%!Cm(bIb +U&%![#U!Jf8q;c@?Ql3neE8W8.(An[U+.r%&>Z)p@AueJ"A<:$81(#"k`:j[M:[e +VI#LRnGj:G9Edo3G%t3R"E`/+c"t!E";ObR#6ms'"EaYTfQriLK&)J!r_O,-LYd" +Dc..3Feq?ceJV=8S)D%4=6^%?s!Js"c-<`XNHa_A1%R?r#,>>ChC$6@&*$t0!Di> +eU*bHG?o$"@02AgDG08cTYX5WpsS-Z-lSNRa;YRiS3!8n4'6\f5!dIZWuqVM9bo* +fh#KR19G=9pFAbb-X2NTDICYL>5tL/?s2C1aH:M\8bu4MFK%_<24re*s(&*V)AVe +h'^S<60GE.XE2H>K0F;O +cOn-C:H5lm\PW?;fYIn3JucXcOION.fLdSjp2R)>iHBF@%>N*1>P+F%i2iRSkOEC +Z8las)5QQ6fBt7,>t=#6b/K:uNmV3_)'-!lD6_LeKnl$0CA +H-^Vpk)4h`[O8o(<;`bcOqUoT1_e!`$@17g-%+`lYfnMX +?d5;0jK?MI[QgG#CfCO^-KD7lq].l)r,qp2[%s%ZO>C]#Si*rf@gZSubC2);L5T* +,o#ds:q8->jBf8b>E.no9u>Eiiq_oZbnkLf +`(s2AUe`VRj'"p#PAT;rrBp4Ir^pGN?!D3A]q9(,616ES\@"X/c:(3unD(Vq]7h8S_s7>M'XF=AEoX>:]NP3+0>$mp +,'=CtN-/lsNR%$D5>HW]QV]u@gq[>a:$o'BeF/9(anduITn-a.7Hl_L*MbQ]5SBNDDE.VID!B,X!Y4Q^5u)apK[tHX+Ie\Jeci29!!\S%lo +6P(J:kW"=<3Zm;91h>D^6QZ*#&d4WY[NR[=$RJD:mA2_/p&3< +0CBUiF9VlGl20SrtKeb*M!e!XHXU8!a6X7JrJ'm4Uj%t#3aPGb(ar\eNm`mlhU;W +8,#h4UuQ4N&-*lQ1A=p1.l854Ldph+_:?igj[S1IuKXbZ#@QqUYlB&NRafYh,%t,WQ"q`ODLQkQaecK?[.`*=6qBjUSq-F220,1_hs_j`=j? +_prV#t=Jf&t7S8,8#O:0i[Si9^Dtf.D\fnTRLiLrm(#`>6$`b.HX!r'l/M4CFLE6 +gu?co&'r1NF#*0%&j[-9\9'gMho/-Bo-[@8/pi=uVj^<4 +3`LOJFI""\DbZ2Uk&OY*6*0=6r'XKa#A!p=/E@#2IFQX[U4r&:,EEcPWa'>?i+&! +U4j"9(e!FIZJ`k'+O_Ar1WYlOqpZPk*a!+48jk]d0XX06$42qU3^Z%EtG*rMC[a% +N5\(%l[Rs/.f+b\lM>SN6>fPl8fk2[/eOR<5#\$ +I8.+&k8s0J6/84!9p5T>P>SBD!5tmRdp6--M`'+C8_))-drrAeT^N>j2Nr4?jE6G +JHI!NDJ4tBQVXi(omlAHrgPuUfo:'mTN@D^i^':I?a?qId+!5HqhfZ%470#nfRXN +=#B^/NkBo\"3_+)G,O6&?n.88#c/.u<]emNfiC6@GV4Ws#s0D65;sYgQ."3I<\-, +ZkZZ6:LaiA(g^D9>m>I`+HVC.$lZ"8o<7S\'^`Q.7sZ!9!bp*.SC;.ug +@AI=AVjYM>aJ'o&i(.#!*c%j_Q]M$iJ/57K#(B1YYo +TJh9_(Z,U@snhCYOKk*>;p+RM?fHC^$BfFnnb\sq03HR_9\Y*W)6LthDF#%iLA.C +;V."S7dMnr1A#UR2'?3Cu-Wh-u-fUpuI,:$iT#,ko>kRSoom')&bIFPCuk7-np*E +p'Mo@eS6O5;_(aBV=\U()GZ=nI:Kd;RgI]j1&eg?bXSY,037-(/IGd-UpUr8aeUN +,&2ECh`-Z@[`D!0B['hW4N>/.+,X@r\42&77guAP7m4.BIYfVGj@l/!H3]W +$6N<6NP"ZPRnCD7T!_;HpR!4ntMrq*iAFXp2:-Z&u_aK@gUIjWb!X51u,I/ArT`( +UEoa4Z3#sH6Ae&e,2G9cCqME"*,][62J!Os>mSndBKDmOF.8[21>&M1OaGs`,5$@ +Mmb>SkZ#QR0CgJN_EMj&PN%e29[.X"U<;.%h8p`a%+nTL_S#0RPgA+=e6g!Y$@k7 +[qGhS+U3LRlI1\.C'.jM#XP\k([,>]/>H]-O9$sK5*-X]Gag(;U\f>Dj&fB@*$]0 +,HY:Pue"P#XNq$#EOnjjk?5RW/ZSKW'Ec'dVpW\>;J_#2)bE6ZrtO39*u'DJb--3 +(@':9YW+c>:L_Z6Y\PXgp&9AJ802U+%SB?:F1&M[bHeQP(bgP\lLkD4/3[pn:)-\ +C;]`4&QarRS9$bbIG5o7gBAuS.ilIA/Su6N)k0FMMJ%pHCMVk[-RfboRM5<0V8pu +db*aP2RfF?Tacq&rBR4A0&>`aRPDu.Ms^=%`fWfd;CMoU.9*8RG[JH:AWYJ]4J6"B +e>^l].0o,/o'OZD9H^e8/rQQ?4+]Pfe>2/p<0shH3d988E79^>#$V4,C"5mHR9G9 +G4c*m-QRMk6@7WXL!C6l:DMC"g-XEG*=XPRF'c&1YR<+PON.kCBb*?Ns!8bjigLC +fD*#[_*_7Q((;**V"Soq;fq,AQYK(+dB_:7YIfQ'8UEj%Z=(>4,VI^#Xt-L4Mj+X +5OHOM#^-&h[t*r4l(5.(/< +eCrs((a3O6.ueQrF++i^`X*E!GD^OPs>T1"COM/!$I5Ug(n0M5$ab;<,8;L+70L0 +k+u5d;6?S:5+k^"@[2XXQI,&n^9gh-PM^J0Jcu%c,^)8 +@+"KN^tUL]>dBZe]jArrC-14A!*[/lq,lmZSL>#; +Mt;]P,;e-D7c@6DIkY>qp-0/JBOT7;RR!b^u)_NJROHfe>RL#G>1'qC5S.b!]^ef +Knk0:#^P[3G)U09?-GNBbLfW;f_u:L`*c-K]VDN@WmYPrrCLrT;`d`dToFY$;qSF +P_B9U/i5dPU@8f+;T,(SUfFH/C7D.]WJ!J+P*D4G9K8:#O9`W82X(j%-,qLrHmp: +BY\JFk9YF2-`?gA:J]pQD9AGTtMT<%VeaV:%:?VGDDL%4f=hmQ,:g^"IglqOqn[F +>"E;A9E[Sk9&St@?T.m[&,7e1UUl7B-?";@Ye1r':em=K#Wge$L[+ia2pP;u41:+DT#Q#j=TMcM\s&_Fs"BCC)UT0GID2-%R44,\ih%>)d?]#-&5D]"Mk2> +`4R70Z%iF"]OTh71rX<.a"V0T4nc;[>IS[Ih&_AKa"8$$47!U&8j':beLKu&eqNn +S#TLqS5O]48Tb:>7rji*,;4YT*I!M`(R_D`I!\)p]):!RV+W;-Ua!`i;Bjbg%,q/cn8ouZ,3b[9O@D:ReTbr9dSi!BS*(PWnUaKcD9.mh43A/LT5aZ +@>Toh]RAfST=3o_I83K!>I]un2/d()8(p=lfM +A$FS-0XZ/1@HN"Wab((E1W@&5d;8^#eXr&%AHENg*173'mN=CMV\ES<6T&OS=cU` +2UbQfC6Wer;O!?OTaE)+<,S0W2EF9epXU(ZD%)#W5On:1pkblape`"+2?`eFS9WQ +IG8@9(-8!-kM3F\]`4NIKD.7[EAcUs.gU))M-*\@\VGNh67o0Zfkn2$(!_u`@)dH +NMH,a3YmiemnlNBVBLaL4k`5%"B9j%!lm9e-AEnT!;[aN[O9sV'T.G+Z;C9X?2YD;oq<.!(M`:rr=.s)GOnb8%c&Job.i$J*YsOj(s1[a^T)()_6=g7.C4/tk^S?]ll5O_9D2?^AZF.W5^Sf2F,!(F9]X]:nd +R!F":R\5'p3Ia9UC>*4c2G_Xt=`\f#I6i`II[rZu"f(!tD()3(RpaW7uAhkajfdU +XPSAD[(Xfp,;+"P>UKdEeP9A,o?9jKBF04(e]*KlbTH%dEsn)\5HE!YeV6n`D:c, +#;q8M[bi?_S&3EFO,%iXA\@>enm)N2@eu)9/Z_/g2ZT"JrQGg*p'!USq5fmYh)FZ +F1mBXNb6u,j!gJPVn"jAYkJ]8XTqPBr7DlOf`$V',YKld\meUm8N+NQO:.,PbuDi +`CAq`R&NqcpE+'b7bV`DP+YB@'@<'$Fg%G3_/aS)P+Zf/XdhPA)G56%6$g>W0WCD +/=&gZm3N;PVLSSXP8#0Vnc^9lf5`r!af!dc[Ptm$0QtBSeY`F$>\6!bbFZG\]D=W +o.dmbj\0+c=cq0JRDh+?P4E[B8[/Kl>":1_.*YSX^iKs.R:(Ucaa,,&5S;qa!Z,b +d;@=p3)9-b79f%$CEJ_d4(eoZn8^K8Nu,.V'i2>G;-W%EnHFEq+oa,fd!\JI(I@KN.CVfUE8uP'kQssoSkEC7UcmP-Qgmo43i7N`lDs +)Ss(trH7RXHeX<"[J:SnFt=p-`bAr6+eiV:JHFFNe/E,USOe,Y]D3g9'4-/L/#tZ +O8:$^*nn7a]HW"*n(bC-Sd,q@8:ViQX"bG4]&3U7,Jl%3Pp/+WDqSTK^4HgGr28K +bKIC!4lmnDXno:)_r?OP3,ok3EjX#H#ptpUL%ipp\.up)U;7C+F +1EaXOU$nl2tBgoVeVDfgmuiOSjGJT8P\@HeV8@ +?Fa8G6&L;`lHqlb7)4pY8X7.C3R_gPoU))?0]Ce@Cn'jT,VXd.=#=MjSKolqiZA` +HQ?drNaN/+U^GeGo6-+'qGiol&ZCphe[UIo4D$N%!cWE9$`CXih]8M]EP`_<>ao +K/kQc+4dMq.j]#Ghl9WFdUS<]oW(K3;K;@6A/G_'>s4m&dpA0fgIk=38lArdmbru:%PYJRM)9K6rr?I>A4f*+> +KSF#*h.%gL"Ku!b#B$JAWrHsc(m7HeeBjW+I8Ka=u;!"dB&WM[%< +?K0#RAm=("ej7M2k0;)akiUIPnF?fdC.qNZ`(h!)9QCg>\LFBWM`(Lb9SL3"GEToP_*_@RgYUrqNr +qI"3-`X?-ua4p(UgKDRLUb-@OUU?2C#@(bGlW!db^,X4o9$oFXRPh[a]fnUjsD!/ +Hb#MW.i5F%cb6-=?j^6!n#_OHc!59-kj,L:[]k?GHg^*RJT+8h$,@P?uU&M:GV.7e:^;U*]VYu1&[Jm& +e[;RD-'JeSL#,K:'b99U6o<+5\*YDHR*is^9=8pRVj?^uV3#ReeuA0j2'>*K8Z&? +Zdfb(GT@J].?GOI>sIEbW[Q=#n:DD62Oo,mkZV@^4jrg`l>O_b;iZ#]g0l$0l@Jf +D4hYtOf)g&O0.trsBqtkTZjR#4$NN;>Zm3$r+.'b= +,)=;'Si:V@$t3re22X)X[+qJTMp/\q.VWdnK&T^J(NXPl-!.iK)CHDU`Vcf9 +^1@rplmPKDjk8ONi=Gq&UU]1W".@bKPKj1=LoO.bk=-e@#hRXo"gMTc(h$;5EFmDA"WL\6"A%$* +b1Y6D/g!ZBDDuR'ao(UbNCe/f(@i,5)UXH@g_#Ybe6A<*,@0D08r_SYEM?-0ddTmo3P,$Hjj^rDOb<`et5C +Z\JJ[l[D^r9#@m_SNj,ab'8oom;d2Yf.NW,%!:M$Z#]P;-^:6KF[oXakmSVXYe6J3&E#5X889uXSs&oNHRi5oB4<(K/J;r\Ti8,T-3p2QTh0OqIT;ADrqE1sKfO +ggQ[:RKF5*eH7;S&^mU=c(ED`,*Z/iEW/!jNOGL^!]Z/Gbj!f>]l*#8BikJ.br7S +aF/hBRC<`F'Ka6IGgj1M_jVQU4:ks7SO=lE*D:$,%Km>qlO3t;(9i3pD%&\&m0*h +96m)U<0!K:c&VQNKKU>mG#sUBN!J7s,5XqtY#H(3[-38o["Eu6-$GbNfE*m]]&r> +=4XH]X/lBCp3PNn/3e0Z.XfXR^MR.U+bB,d&P;_C&l9;$fRD/C=qRrF$?]\Ci;:j'\V/Dq;j"/VYW>:eFh;K]CQVNTpOTlkCt(DkTcHhEEC +<#!f4D^sJ2V+8%WDEkib1NTm#1Wr*rhG]CK\!1:W"VnON)*EWG^7rPi/&!V1@i8A3V^3 +ssr3H`2CB>9(k(SCNaNEb4[hRNs;A<=nEA&O[;K$?J_d7u-Z?s!*j]U/=;HdIoe= +oprS-X'Q+,@%q1fU.8&`nr<)jNXKFkLKY;s+lbR=4HKd.9n=f1h+2A<8]-m-AR,\ +Pp#hV-$OP3LemE;KH]b4EOn*]Z655B117m;\$mjAo0h-\MVKT_$9U*Xd_rs\CN4T +il.auM3=*7=2m"GX7Wgo\Jf_5:\$7oCFVsn\a"Kj)),%,JgMS3OBo7-&o/`SJ>!_ +sG!3[,"b]KWH;^&)_Prcn?a?^Lnqq%)P,Wn189INBOpE;ZmRQf[/Q44_bBGj2U])ds10ee-)%SSP>YWn0oh]a9ieSg3&jX%\@QX=$,;b#N.S +T#jO7Na!-4/q"8#FXV92ROEL0l->B#BZFhYd9J`%63Hhc1+OiZ'+J%Q$+7T.0lNr +Z7fcQhpM<]&f3mmeJ,'*IKY@^sM=H8:8Lg8pGp-(,o$\_>N_??Yh0=*#KPC=:,7+ +onr\.\=6'*4^5sQ7l_@fRuhZe7[N*0GL_j!0=XRh9@)GaolFfV6,S2*gP!U.[SUF +Ul,/OF0p'TQtE*P7*e(kk]4RWIP-7?T755!\l@nKj$-1DQq6bt;h@]_dCN'Cb`Da +@0F@iI<(D=L&[UQNl8/$sB2HKPto@da9Qk[3T)!+hd9oh),*n+"7P3`97F( +D&jI2kse=F-J'P)Rs@<6VLi'uieK&t&:o1BZsu\uG%nqc)Ca7$DI\PLMs*P7;HRd +1UR+^`!,Anah+%.Qr]ap!;U;kn)#jRMYk3`\8L\BG3fq_2Pm&9YJjBXUrGYDQl$U)^FTYR@)W.?.Z8d&`e$AS.k[gE"M?6Eo-nSRE=fW%Y_G8,3q8ERSi7 +U^k8)79Go>jc88QZ8\"+01=p?Hbq_t`[?2+8B^SNA]HPB +W@5l^!.Z\$/[i]5d\rOK#?0^?Q1m,;DBu((ER(eM2$!%K]6D/*cNrbA*%rY_^1G6 +oi(WGIZ^?t#>r,\RC-0'Ge>,*29S` +1J#J5AlQNGQ?tBn+/i)![_X=[TT7A%D@!c'-)O;%R[,@0E`@(]b5m_`^&H8IqmML +$3`GCLQ8.5[Ka6CB[cm4s-.7VT2N5:lAoEMfA[i>J'$F^X)_h:$`'ThZj]CY%W*r+X4=X +dOW-GXj9B@l^!Rr5I+^gTH'E!nKoWHutRN9K'>sDn:Lgl3UT8FE!VEc`i*Pq+$MN +V-+:*Vg,nK]0mH6@rP07mZ+GOd#)h+Zs)OqMi/%CAPuijN"2Rt(Qrdc:H6eeT/5m2TgN<<8S(I'T)k`$OJ)R4^BT*L"uij +/%]I8'8sAcI[q<#GG^WTlA^d'3(`+AGal1[]g:BPP/<6P'gcTZOLsj5;t3QHqqdD +Qch-M&`tFg5*&WF5X( +_+M76Ctl&#XnWDHHVH&5*JDB*Z@'@t_QSss*9Gcp%o8tI,oAYm_rbqu\m/-D./b' +MtB`&dKk:fJ[VqdfY+H,^]4"cD^LX=Q3Wf=E.>15=3#EEV^OdmN+'7&$[%]1[G=O +:%5;UG)[s3hN\lbfmE72OJ>Ap=@h"ej"kkGD[BN.Ue4o9g)?rb;.FJ8@QLAnZ^j` +/Fs/7fW4VHU3="g\%G/*+=&6?:/c4Q"cku'!VPP7"dF^C-kW0M@9bsXH@I4)QifU +Z/Z"3+,!J`nWJo!M=#[@7(%%Xgjdo/c@#YAj#?tH43Y4/0`9a +WZST_+^b:P3:&>_/"SA22OX/UQB_lf<<#SD0O\@:sJ>I9=07;bF\M4$C\W0D/6X: +D`SlU`$+f"Zl=CK"6g6N7$@M_9]W.7e/H-.7P]"gp9,CeaQ33^A66d@RM$L749+G +"XgS8nTF9Mnl^Sb?KLj+Jg;\#uLr26#.F,>`KarQ+qacPUVj?.`ra:Q^Vs[Yfnb> +Df'UhJH?1J91(\nfjU(_"@u*1\Je[G4d[Xo-mch)\[K8Beff#J7HRc2MCY]l#[UN +>i%#-;r)n`(#55:3^N9_mYt7R,PBB;+Et`>+WL%A+V<#4n3EEGgXS+)%bQ0W4"1p +jpBQUm[7AWP0WAN%[S:sT]K&P3k5$'e-!X*[IhcY!j#X3@Q'"2kiIiH7bH +TRrHJ?jkEWXdI)hDdHJH@n&H;?'RahK#oS/0a+,:F[mCT+_/UdF'tG$:Q!>7CS!' +:-n'c*+C[qNqg=VELZD&q&)#GNM$a7[_%@RNiJ'UfJDXj,Gg^AR<>:Y;%)B+!Ugi +:FTTsRHUot_H)Wt9h\=-[k0"5C$4$A:OieS^0;Z0O^aNK90.UUT0`lN.MfaiVo.t +S!\mm7)E?m5[P42:S7Ybf8sq,);gFm&FbBqen>Pa=&CTiIcT5f4fgTJ`RrEtd=Gr +*5ocS)Q">"*(DeE'%Znd<2oHd-NTG!nrD*BSLkA0I5TqH:?RZ!Ah:5=Hr/M43u+] +fp7!YsCmdbF%d:Il$@g<^M?5um,%<@TDe;f_](5XN],ej@J&mbH[m\C_2TY0cTHL +(r5J\'^S??f)hQk:+D;'(++=8h>>/K3R60TKn0UAt:8>_+V)FR<;AANA3>eM$K9P +$&='`W2/'rD5+4B@!]c(Un9AYX53T2]T^MF;G]p9:ep(RklM!0[eSL?=rFohNB!^ +LeSn&(]>=[V&BX,mO8ml~> +%%EOF diff --git a/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.pdf b/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.pdf new file mode 100644 index 00000000000..bf4dcb67978 Binary files /dev/null and b/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.pdf differ diff --git a/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.tex b/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.tex new file mode 100644 index 00000000000..76e8b330781 --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-optexp/doc/pst-optexp-doc.tex @@ -0,0 +1,726 @@ +\documentclass[headinclude,DIV12]{scrartcl} + +\usepackage[latin1]{inputenc} +\usepackage[T1]{fontenc} +\usepackage[english]{babel} + +\usepackage{scrpage2} +\usepackage{url} +% +\usepackage{pstricks} +\usepackage{pst-optexp} +\let\verPstOptExp\fileversion +\let\datePstOptExp\filedate +\usepackage{multicol} +\usepackage{showexpl} +\lstset{breakatwhitespace} +\usepackage{nicefrac} +\usepackage{graphicx} +\usepackage[colorlinks,linktocpage]{hyperref} +% +% New commands +% +\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}} +\newcommand{\OptExpPackage}{\textsf{`pst-optexp'}} +\newcommand{\parameter}[1]{\texttt{#1}} +\let\param\textrm +\def\@UrlFont{\small\ttfamily} + +% +% Settings +\setkomafont{sectioning}{\normalfont\normalcolor\bfseries} +\setcounter{tocdepth}{2} +% +\makeatletter +\renewenvironment{description} + {\list{}{\labelwidth\z@ \itemindent-\leftmargin + \itemsep0pt \parsep0pt + \let\makelabel\descriptionlabel}} + {\endlist} +\makeatother +% +% Kopfzeile mit scrpage2 definieren +\clearscrheadfoot +\setheadsepline{0.4pt} +\ihead{\OptExpPackage}\ohead{A PSTricks package to draw optical experimental setups} +\pagestyle{scrheadings} + +\psset{subgriddiv=0,griddots=10,gridlabels=7pt} + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\begin{document} + \title{\texttt{pst-optexp}\\ A PSTricks package to draw optical experimental setups} + \author{Christoph Bersch \textless + \href{mailto:usenet@bersch.net}{\texttt{usenet@bersch.net}}\textgreater} + \date{\datePstOptExp\enspace\enspace Version \verPstOptExp} + +\maketitle + +\setlength{\columnseprule}{0.6pt} +\begin{multicols}{2} +{\parskip 0pt \tableofcontents} +\end{multicols} +\section{Introduction} +The package \texttt{pst-optexp} is a collection of optical components +that facilitate easy sketching of optical experimental +setups. Mechanisms for proper alignment of different components are +provided internally. This way the user does not have to care for proper +orientation of the elements. + +\section{Components} + +In the following sections \ref{sec:mirror}--\ref{sec:custom} the +available components with their parameters are described. Up to now +there are two types of components: those which require two reference +points and do not alter the direction of the passing light beam (for +example lenses and retardation plates) and those which work in +reflection and require three reference points (mirrors, grids, +beamsplitters etc.). + +In section \ref{sec:general} general parameters are described that are not proprietary +to a specific unit but can be used for several different components. Finally, in +section \ref{sec:labels} the options for the positioning of labels are +explained. + +\subsection{Lens}\label{sec:lens} + +\begin{description} +\item[\param{lensheight} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{lenswidth} (dimension):] (\emph{default:~\texttt{0.3}}) +\item[\param{lenstype} (plainconvex, plainconcave, convexplain, concaveplain, biconvex, biconcave):] (\emph{default:~\texttt{biconvex}}) +\item[\param{lensradius} (dimension):] (\emph{default:~\texttt{\cs{empty}}}) +\end{description} + +For the convex lenses only two parameters are used. If the +parameter \parameter{lensradius} is set, its value will be used together +with \parameter{lensheight} to draw the +lens. Otherwise \parameter{lenswidth} and +\parameter{lensheight} are used. For concave lenses all three parameters +are needed. + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens[lenstype=plainconvex](A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens[lenstype=convexplain](A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens(A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\bigskip +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens[lenstype=plainconcave](A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\bigskip +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens[lenstype=concaveplain](A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\bigskip +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \lens[lenstype=biconcave](A)(B){Lens} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{General plate} + +\begin{description} +\item[\param{plateheight} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{platelinewidth} (dimension):] (\emph{default:~\texttt{2\cs{pslinewidth}}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \optplate(A)(B){filter} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Retardation plate} + +\begin{description} +\item[\param{plateheight} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{platewidth} (dimension):] (\emph{default:~\texttt{0.1}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \optretplate(A)(B){$\nicefrac{\lambda}{2}$} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Pinhole} + +\begin{description} +\item[\param{phlinewidth} (dimension):] (\emph{default~\texttt{2\cs{pslinewidth}}}) +\item[\param{owidth} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{iwidth} (dimension):] (\emph{default:~\texttt{0.1}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \pinhole(A)(B){PH} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Crystal} + +\begin{description} +\item[\param{crystalwidth} (dimension):] (\emph{default:~\texttt{2}}) +\item[\param{crystalheight} (dimension):] (\emph{default:~\texttt{0.8}}) +\item[\param{caxislength} (dimension):] (\emph{default:~\texttt{0.6}}) +\item[\param{caxisinv} (boolean):] (\emph{default:~\texttt{false}}) +\item[\param{voltage} (boolean):] (\emph{default:~\texttt{false}}) +\item[\param{lamp} (boolean):] (\emph{default:~\texttt{false}}) +\item[\param{lampscale} (real):] (\emph{default:~\texttt{0.3}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \crystal[crystalwidth=1.5,% + crystalheight=0.6,% + fillstyle=solid,% + fillcolor=yellow!90!black,% + labelangle=-45,% + voltage,% + lamp](A)(B){SBN} + \psline[linecolor=green](A)(B) +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Box} + +\begin{description} +\item[\param{optboxheight} (dimension):] (default:~\texttt{0.5}) +\item[\param{optboxwidth} (dimension):] (default:~\texttt{1}) +\item[\param{endbox} (boolean):] (default: \texttt{false}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(3,2){B} + \psline[linecolor=green](A)(B) + \optbox[labeloffset=-1](A)(B){Box} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){B} + \psline[linecolor=green](A)(B) + \optbox[endbox,labeloffset=1,labelangle=180](A)(B){Box} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){B} + \psline[linecolor=green](A)(B) + \optbox[endbox,labelrelative](A)(B){Box} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Detector} + +\begin{description} +\item[\param{detsize} (dimension):] (default: \texttt{0.5}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,1){B} + \psline[linecolor=green](A)(B) + \detector[labeloffset=-1](A)(B){detector} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Polarisation} + +\begin{description} +\item[\param{pol} (parallel,perp,misc,lcirc,rcirc):] (\emph{default:~\texttt{parallel}}) +\item[\param{polwidth} (dimension):] (\emph{default:~\texttt{0.6}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3.2)\psgrid + \pnode(0,0.4){A1}\pnode(3,0.4){B1} + \pnode(0,1){A2}\pnode(3,1){B2} + \pnode(0,1.6){A3}\pnode(3,1.6){B3} + \pnode(0,2.2){A4}\pnode(3,2.2){B4} + \pnode(0,2.8){A5}\pnode(3,2.8){B5} + \psline[linecolor=green](A1)(B1) + \psline[linecolor=green](A2)(B2) + \psline[linecolor=green](A3)(B3) + \psline[linecolor=green](A4)(B4) + \psline[linecolor=green](A5)(B5) + \polarisation[pol=misc,position=0.2](A5)(B5) + \polarisation[pol=perp,position=0.35](A4)(B4) + \polarisation[pol=parallel,position=0.5](A3)(B3) + \polarisation[pol=rcirc,position=0.65](A2)(B2) + \polarisation[pol=lcirc,position=0.8](A1)(B1) +\end{pspicture} +\end{LTXexample} + +\medskip + +% +% +% MIRROR +% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\subsection{Mirror}\label{sec:mirror} + +\begin{description} +\item[\param{mirrorwidth} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{mirrorlinewidth} (dimension):] (\emph{default:~\texttt{0.7\cs{pslinewidth}}}) +\item[\param{mirrortype} (normal,piezo,extended):] (\emph{default:~\texttt{normal}}) +\item[\param{mirrordepth} (dimension):] (\emph{default:~\texttt{0.08}}) +\item[\param{variable} (boolean):] (\emph{default:~\texttt{false}}) +\end{description} + +The style of the extended mirror is defined as a +psstyle \parameter{ExtendedMirror} and can be changed using +\cs{newpsstyle}. The appearence of the piezo mirror likewise can be +changed by adapting the psstyle \parameter{PiezoMirror}. + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){G} + \pnode(0,3){B} + \psline[linecolor=green](A)(G)(B) + \mirror(A)(G)(B){Mirror} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){G} + \pnode(0,3){B} + \psline[linecolor=green](A)(G)(B) + \mirror[variable](A)(G)(B){Mirror} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){G} + \pnode(0,3){B} + \psline[linecolor=green](A)(G)(B) + \mirror[mirrortype=piezo](A)(G)(B){Piezo} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(2,2){G} + \pnode(0,3){B} + \psline[linecolor=green](A)(G)(B) + \mirror[mirrortype=extended, + mirrordepth=0.1](A)(G)(B){Extended mirror} +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Beamsplitter} + +\begin{description} +\item[\param{bswidth} (dimension):] (\emph{default:~\texttt{1}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(2,2){G} + \pnode(3,0){B} + \psline[linecolor=green](A)(G)(B) + \beamsplitter(A)(G)(B){BS} +\end{pspicture} +\end{LTXexample} + +\medskip + + +\subsection{Optical grid} + +\begin{description} +\item[\param{optgridcount} (integer):] (\emph{default:~\texttt{10}}) +\item[\param{optgridwidth} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{optgridheight} (dimension):] (\emph{default:~\texttt{0.1}}) +\item[\param{optgriddepth} (dimension):] (\emph{default:~\texttt{0.05}}) +\item[\param{optgridlinewidth} (dimension):] (\emph{default:~\texttt{0.7\cs{pslinewidth}}}) +\item[\param{reverse} (boolean):] (\emph{default:\texttt{false}}) +\end{description} + +\medskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2.5){A} + \pnode(1.5,2){G} + \pnode(0,0){B} + \psline[linecolor=green](A)(G)(B) + \optgrid(A)(G)(B){grid} +\end{pspicture} +\end{LTXexample} + +\bigskip + + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2.5){A} + \pnode(1.5,2){G} + \pnode(0,0){B} + \psline[linecolor=green](A)(G)(B) + \optgrid[reverse](A)(G)(B){grid} +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2.5){A} + \pnode(1.5,2){G} + \pnode(0,0){B} + \psline[linecolor=green](A)(G)(B) + \optgrid[optgridcount=6,% + optgriddepth=0.2,% + optgridheight=0.3](A)(G)(B){grid} +\end{pspicture} +\end{LTXexample} + +\medskip + + +\subsection{Custom components}\label{sec:custom} + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,2){A} + \pnode(3,1){B} + \optdipole(A)(B){% + \rput(0,0){% + \includegraphics[scale=0.25]{parque-nacional} + } + }{Label} + \psline[linecolor=red](A)(B) +\end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] +\begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(1.5,2){G} + \pnode(3,1.5){B} + \opttripole(B)(G)(A){\rput[b](0,0){Text}}{Label} + \psline[linecolor=red](A)(G)(B) +\end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{General options}\label{sec:general} + +\begin{description} +\item[\param{angle} (real):] (\emph{default:~\texttt{0}}) +\item[\param{optional} (boolean):] (\emph{default:~\texttt{false}}) +\item[\param{position} (real):] (\emph{default:~\texttt{\cs{empty}}}) +\item[\param{abspos} (dimension):] (\emph{default:~\texttt{\cs{empty}}}) +\item[\param{showoptdots} (boolean):] (\emph{default:~\texttt{false}}) +\end{description} + +The parameter \parameter{angle} is available for the macros \cs{optbox} +and \cs{crystal} only, as for the most other cases it would make +no sense. \parameter{optional} can be used with every component and marks it as +optional and can be configured by changing the psstyle \parameter{OptionalStyle}. +\parameter{position} is equivalent to the \parameter{npos} parameter of \cs{ncput}, +but is used only for the \lq dipole\rq-macros to position the component +between the two given points. In addition, there is a parameter +\parameter{abspos} that allows absolute positioning between the two line +points. \parameter{showoptdots} shows in black the two points calculated for the +positioning of the component, and in red the reference point for the +label. + +\medskip + +\begin{LTXexample}[width=3.5cm] + \begin{pspicture}(3,3)\psgrid + \pnode(0,1){A} + \pnode(3,1){B} + \psline[linecolor=green](A)(B) + \optbox[labeloffset=-1,% + angle=10](A)(B){Box} + \end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] + \begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \lens[optional](A)(B){L} + \end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] + \begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \lens[position=0.8](A)(B){L} + \end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] + \begin{pspicture}(3,3)\psgrid + \pnode(0,1.5){A} + \pnode(3,1.5){B} + \psline[linecolor=green](A)(B) + \lens[abspos=1](A)(B){L} + \end{pspicture} +\end{LTXexample} + +\bigskip + +\begin{LTXexample}[width=3.5cm] + \begin{pspicture}(3,3)\psgrid + \pnode(0,0){A} + \pnode(1.5,2){G} + \pnode(0,3){B} + \psline[linecolor=green](A)(G)(B) + \mirror[labelangle=0,showoptdots](A)(G)(B){Mirror} + \end{pspicture} +\end{LTXexample} + +\medskip + +\subsection{Labels}\label{sec:labels} + +\begin{description} +\item[\param{labeloffset} (dimension):] (\emph{default:~\texttt{1}}) +\item[\param{labelangle} (real):] (\emph{default:~\texttt{-90}}) +\item[\param{labelstyle} (macro):] (\emph{default:~\texttt{\cs{small}}}) +\item[\param{labelalign} (\cs{rput} pos string):] (\emph{default:~\texttt{c}}) +\item[\param{labelrelative} (boolean):] (\emph{default:~\texttt{false}}) +\end{description} + +\parameter{labeloffset} specifies the offset from the center of the component, \parameter{labelangle} is the +absolute angle which is independent of the component orientation, +\parameter{labelstyle} is the textstyle that is used to typeset the +label and \parameter{labelalign} corresponds to the refpoint of +\cs{rput}. With \parameter{labelrelative} the label is oriented like the +component is. + +\newpage +\section{Examples} +\begin{LTXexample}[pos=t,vsep=10mm] +\begin{pspicture}(12,2.4)\psgrid +\pnode(1,1.2){CCD}\pnode(12,1.2){Start} +\psline[linewidth=2\pslinewidth,linecolor=green!90!black](Start)(CCD) +\psset{plateheight=1.5, + lensheight=1.5, + lensradius=2} +\polarisation[pol=perp, + position=0.1](Start)(CCD) +\optretplate[position=0.15](Start)(CCD){$\nicefrac{\lambda}{2}$} +\lens[lensheight=0.5, + lensradius=0.5, + position=0.25](Start)(CCD){$L_1$} +\lens[position=0.5](Start)(CCD){$L_2$} +\optplate[position=0.57, + labelangle=90, + platelinewidth=3\pslinewidth](Start)(CCD){SLM} +\optplate[position=0.63, + labelangle=270](Start)(CCD){PF} +\lens[position=0.7](Start)(CCD){$L_3$} +\optbox[endbox](Start)(CCD){CCD} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[pos=t,vsep=10mm] +\begin{pspicture}(6,3.5) + \psgrid[subgriddiv=1,griddots=10,gridlabels=7pt] + \psset{labelstyle=\scriptsize} + \pnode(1.5,1){LaserOut} + \pnode(3,1){Grid} + \pnode(6,3){Out} + \pnode(4,3){Mvar} + \psline[linewidth=2\pslinewidth, + linecolor=red!90!black](LaserOut)(Grid)(Out)\psline(Grid)(Mvar) + \optbox[endbox,optboxwidth=1.5](Grid)(LaserOut){diodelaser} + \optretplate[position=0.3, + labeloffset=0.7](LaserOut)(Grid){$\nicefrac{\lambda}{4}$} + \optgrid[labeloffset=0.5](LaserOut)(Grid)(Out){grid} + \mirror[variable, + labelangle=20, + labeloffset=1](Grid)(Mvar)(Grid){variable mirror} +\end{pspicture} +\end{LTXexample} + +\psset{unit=1cm} +\begin{LTXexample}[pos=t,vsep=10mm] +\begin{pspicture}(9,6)\psgrid + \pnode(1.5,5){Laser}\pnode(4,5){PBS}\pnode(6.5,5){PBS2} + \pnode(6.5,5.7){piezo}\pnode(4,2){BSFwd}\pnode(6.5,2){BSBwd} + \pnode(2,2){BS4f}\pnode(2,0.5){M4f3}\pnode(8,2){M4f1} + \pnode(8,0.5){M4f2}\pnode(1,2){CCD} + \psline[linecolor=green!90!black,linewidth=2\pslinewidth]% + (Laser)(PBS2)(piezo)(BSBwd)(M4f1)(M4f2)(M4f3)(BS4f)(CCD) + \psline[linecolor=green!90!black,linewidth=2\pslinewidth](PBS)(BSFwd)(BS4f) + \psset{mirrorwidth=0.6, plateheight=0.7, owidth=0.7, labeloffset=0.6, labelstyle=\scriptsize, lensheight=0.8, lenswidth=0.2, bswidth=0.5} + \optbox[endbox,optboxwidth=1.5, optboxheight=0.7]% + (PBS)(Laser){\parbox{1.5cm}{\centering Nd:YAG\\ 532\,nm}} + \lens[lensheight=0.5, position=0.2](Laser)(PBS){MO} + \pinhole[position=0.3, labelangle=90](Laser)(PBS){PH} + \lens[position=0.5](Laser)(PBS){L} + \optretplate[position=0.8](Laser)(PBS){$\nicefrac{\lambda}{2}$} + \beamsplitter[labelangle=90](Laser)(PBS)(BSFwd){PBS} + \optretplate[labelangle=180](PBS)(BSFwd){$\nicefrac{\lambda}{2}$} + \lens[position=0.8,labelangle=180](PBS)(BSFwd){L} + \optretplate(PBS)(PBS2){$\nicefrac{\lambda}{2}$} + \beamsplitter[labelangle=0](PBS)(PBS2)(piezo){PBS} + \optretplate[labelangle=180, abspos=0.5](PBS2)(piezo){$\nicefrac{\lambda}{4}$} + \mirror[mirrortype=piezo, labelangle=0](PBS2)(piezo)(PBS2){PZ} + \lens[position=0.8,labelangle=0](PBS2)(BSBwd){L} + \beamsplitter(PBS)(BSFwd)(BSBwd){BS} + \beamsplitter(PBS2)(BSBwd)(BSFwd){BS} + \crystal[crystalwidth=1, crystalheight=0.5, voltage, lamp, fillstyle=solid, fillcolor=yellow!90!black, labeloffset=0.8](BSFwd)(BSBwd){SBN:Ce} + \mirror[labelangle=0](BSBwd)(M4f1)(M4f2){M} + \mirror[labelangle=0](M4f1)(M4f2)(M4f3){M} + \lens(M4f2)(M4f3){L} + \mirror[labelangle=180](M4f2)(M4f3)(BS4f){M} + \beamsplitter[labelangle=90](M4f3)(BS4f)(CCD){BS} + \optbox[endbox](BS4f)(CCD){CCD} + \lens[abspos=0.7](BSFwd)(BS4f){L} + \lens[abspos=0.7](BSBwd)(M4f1){L} + \psline[linecolor=green!90!black, linewidth=2\pslinewidth](BSFwd)(BSBwd) +\end{pspicture} +\end{LTXexample} + +\section{Known bugs} + +For some reason, filling of the concave lenses by +specifiying \parameter{fillstyle} does not work properly. For sure there +are other bugs, but they are not known, yet. If you find some, do not +hesitate to contact me. + +\section{ Todo} + +\begin{itemize} +\item Add components for fiber optics. +\end{itemize} + +Drawing of extended beams with focusing, and so on, is not planned to be +integrated in the near future due to missing ideas for the realization. + + +\end{document} -- cgit v1.2.3