From 9115f9eea3dcb0f57b18a8d194014fd07c282943 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Thu, 11 Feb 2010 23:45:54 +0000 Subject: new pstricks package pst-node 1.10 (11feb10) git-svn-id: svn://tug.org/texlive/trunk@16970 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/generic/pst-node/Changes | 15 + Master/texmf-dist/doc/generic/pst-node/README | 15 + Master/texmf-dist/doc/generic/pst-node/index.phtml | 61 ++ .../doc/generic/pst-node/pst-node-doc.bib | 60 ++ .../doc/generic/pst-node/pst-node-doc.pdf | Bin 0 -> 416702 bytes .../doc/generic/pst-node/pst-node-doc.tex | 942 +++++++++++++++++++++ 6 files changed, 1093 insertions(+) create mode 100644 Master/texmf-dist/doc/generic/pst-node/Changes create mode 100644 Master/texmf-dist/doc/generic/pst-node/README create mode 100644 Master/texmf-dist/doc/generic/pst-node/index.phtml create mode 100644 Master/texmf-dist/doc/generic/pst-node/pst-node-doc.bib create mode 100644 Master/texmf-dist/doc/generic/pst-node/pst-node-doc.pdf create mode 100644 Master/texmf-dist/doc/generic/pst-node/pst-node-doc.tex (limited to 'Master/texmf-dist/doc/generic/pst-node') diff --git a/Master/texmf-dist/doc/generic/pst-node/Changes b/Master/texmf-dist/doc/generic/pst-node/Changes new file mode 100644 index 00000000000..7013b2d5897 --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-node/Changes @@ -0,0 +1,15 @@ +----- pst-node.tex +1.10 2010-01-22 - first version with pst-xkey and an own + documentation (hv) +1.02 2009-12-09 - fixed bug with \hskip and fnode in psmatrix + which now uses \pshspace#1 for \hskip +1.01 2008-11-26 - bugfix for \fnode +1.00 2007-08-18 - new option pcRef for the first node (hv) + - new option Circle for psmatrix (hv) + - fix bug with pst-node and \\[name=...]. It now uses + \ps@ifnextchar for scanning the next token (defined + in pstricks.tex) + +----- pst-node.sty + 2008-12-12 first version (hv) + diff --git a/Master/texmf-dist/doc/generic/pst-node/README b/Master/texmf-dist/doc/generic/pst-node/README new file mode 100644 index 00000000000..621345ddfeb --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-node/README @@ -0,0 +1,15 @@ +This version of pst-node uses the xkeyval package, the extended +version of keyval. + +Save the files pst-node.sty|.tex|.pro in a directory, which is part of your +local TeX node. Then do not forget to run texhash to update this node +if these packages are new to your TeX distribution. +For more information see the documentation of your LaTeX distribution +on installing packages into your LaTeX distribution or the +TeX Frequently Asked Questions: +(http://www.tex.ac.uk/cgi-bin/texfaq2html?label=instpackages). + +pst-node needs pstricks, which should be part of your +local TeX installation, otherwise get it from a CTAN server, f.ex. +http://www.dante.de/CTAN/graphics/pstricks/ + diff --git a/Master/texmf-dist/doc/generic/pst-node/index.phtml b/Master/texmf-dist/doc/generic/pst-node/index.phtml new file mode 100644 index 00000000000..3c72dd01044 --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-node/index.phtml @@ -0,0 +1,61 @@ + + + + The PSTricks web page (Herbert Voß) + + +
+

pstricks by Timothy Van Zandt, Denis Girou and Herbert Voß

+

All the files have a Beta-Status! For a stable + version look at here

+ +
+
+read()) + $entries[] = $entry; + +echo "Files in this directory:"; +echo "
"; +echo ""; + +asort($entries); +reset($entries); + +//foreach($entries as $entry) { +while (list(, $entry) = each($entries)) { +// if (!is_dir($entry) && ($entry != "index.phtml") && ($entry != ".htaccess")) { + if (($entry != ".") && ($entry != "index.phtml") && ($entry != ".htaccess")) { + echo ""; + echo ""; + if (is_dir($entry)) + echo ""; + else + echo ""; + echo ""; + echo ""; + echo ""; + } +} +echo "
$entry<Dir> ".filesize($entry)." Byte  ".date("D, j F Y, H:i:s",filemtime($entry))." 
"; + +?> +
+Page last updated on +

+
+
+"; + } + fclose($fp); +} +?> + + diff --git a/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.bib b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.bib new file mode 100644 index 00000000000..ba07f2211ce --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.bib @@ -0,0 +1,60 @@ +%% -*-bibtex-*- +@STRING{tugboat = {TUGboat} } +@STRING{dtk = {{D}ie {\TeX}nische {K}om{\"o}die} } + +@Book{companion, + author = {Michel Goosens and Frank Mittelbach and Sebastian Rahtz and Dennis Roegel and Herbert Vo\ss}, + title = {The {\LaTeX} {G}raphics {C}ompanion}, + publisher = {{Addison-Wesley Publishing Company}}, + edition = {second}, + year = {2007}, + address = {Boston, Mass.} +} + +@Article{girou:01:, + author = {Denis Girou}, + title = {Pr\'esentation de {PST}ricks}, + journal = {Cahier {GUT}enberg}, + year = 1994, + volume = {16}, + month = apr, + pages = {21-70} +} + +@Article{girou:02:, + author = {{Timothy Van} Zandt and Denis Girou}, + title = {Inside {PST}ricks}, + journal = TUGboat, + year = 1994, + volume = {15}, + month = sep, + pages = {239-246} +} + +@Book{PostScript, + Author = {Kollock, Nikolai G.}, + Title = {Post{S}cript richtig eingesetzt: vom {K}onzept zum + praktischen {E}insatz}, + Publisher = {IWT}, + Address = {Vaterstetten}, + year = 1989, +} + +@Manual{multido, + Title = {\texttt{multido.tex} - a loop macro, that supports fixed-point addition}, + Author = {{Timothy Van} Zandt}, + Organization = {}, + Address = {\url{CTAN:/macros/generic/multido.tex}}, + Note = {}, + year = 1997 +} + +@Book{PSTricks2, + author = {Herbert Vo\ss{}}, + title = {\texttt{PSTricks} -- {G}rafik f\"ur \TeX{} und \LaTeX}, + edition = {fifth}, + publisher = {DANTE -- Lehmanns}, + year = {2008}, + address = {Heidelberg/Hamburg} +} + diff --git a/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.pdf b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.pdf new file mode 100644 index 00000000000..6c2be6391a7 Binary files /dev/null and b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.pdf differ diff --git a/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.tex b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.tex new file mode 100644 index 00000000000..71e00c1f319 --- /dev/null +++ b/Master/texmf-dist/doc/generic/pst-node/pst-node-doc.tex @@ -0,0 +1,942 @@ +%% $Id: pst-node-doc.tex 263 2010-01-22 11:13:25Z herbert $ +\documentclass[11pt,english,BCOR10mm,DIV12,bibliography=totoc,parskip=false,smallheadings + headexclude,footexclude,oneside]{pst-doc} +\listfiles + +\usepackage[utf8]{inputenc} +\usepackage{pst-plot} +\usepackage{pst-node} +\let\pstFV\fileversion +\let\belowcaptionskip\abovecaptionskip +% +\newcommand\xstrut{\vphantom{\tabular{c}Üg\\Üg\endtabular}} +\newcommand\psBox[3][white]{\rput(#2){\rnode{#2}{% + \psframebox[fillcolor=#1]{\xstrut\makebox[3.2cm]{\tabular{c}#3\endtabular}}}}} +\def\bgImage{% +\psscalebox{0.85}{% +\begin{pspicture}(-1,-1)(21,7) +\psset{framearc=0.2,shadow=true,fillstyle=solid,shadowcolor=black!55} +\psBox[blue!30]{7,6}{politische\\Kommunikation} +\psBox[red!30]{3,4}{interpersonale\\Kommunikation} + \psBox[red!30]{13,4}{massenmediale\\Kommunikation} +\psBox[green!30]{1,2}{starke\\Beziehung} + \psBox[green!30]{5,2}{schwache\\Beziehung} + \psBox[green!30]{9,2}{Fernsehen} + \psBox[green!30]{17,2}{Zeitungen} +\psBox[cyan!30]{7,0}{öffentlich-rechtl.\\Fernsehen} + \psBox[cyan!30]{11,0}{privates\\Fernsehen} + \psBox[cyan!30]{15,0}{Boulevard-\\Zeitungen} + \psBox[cyan!30]{19,0}{Abonnement-\\Zeitungen} +\end{pspicture} +\psset{shadow=false,angleA=-90,angleB=90,linewidth=2pt} +\ncangles{7,6}{3,4}\ncangles{7,6}{13,4} +\ncangles{3,4}{1,2}\ncangles{3,4}{5,2} +\ncangles{13,4}{9,2}\ncangles{13,4}{17,2} +\ncangles{9,2}{7,0}\ncangles{9,2}{11,0} +\ncangles{17,2}{15,0}\ncangles{17,2}{19,0}} +} + +\lstset{explpreset={pos=l,width=-99pt,overhang=0pt,hsep=\columnsep,vsep=\bigskipamount,rframe={}}} + +\begin{document} +\title{\texttt{pst-node}\\Nodes and node connections% +\\\small v.\pstFV} +\docauthor{Michael Sharpe\\Herbert Vo\ss} +\author{Timothy Van Zandt\\Michael Sharpe\\Herbert Vo\ss} +\date{\today} + +\maketitle + +\begin{abstract} +This version of \LPack{pst-node} uses the extended keyval handling +of pst-xkey and has a lot of the macros which were recently in +the package \LPack{pstricks-add}. This documentation describes in the first part +the basic node commands and connection from the old PSTricks documentation. +The second part describes only the +new and changed stuff. . + +\vfill +\noindent +Thanks to: Denis Girou; Rolf Niepraschk; Sebastian Rahtz; +\end{abstract} + +\clearpage +\tableofcontents + +\clearpage +\part{Basic commands, connections and labels} + +\clearpage +\setcounter{page}{31} +\part{New commands} +%-------------------------------------------------------------------------------------- +\section{Relative nodes with \nxLcs{psGetNodeCenter}} +%-------------------------------------------------------------------------------------- + +\begin{BDef} +\Lcs{psGetNodeCenter}\Largb{node name}\\ +%\Lcs{psGetNodeEdgeA}\Largb{node type}\Largb{node name} +\end{BDef} + +This command makes sense only at +the PostScript level. It defines the two variables \Larg{node.x} +and \Larg{node.y} which can be used to define relative nodes. The +following example defines the node \verb+MyNode+ and a second one +relative to the first one, with 4 units left and 4 units up. +\Larg{node} must be an existing node name. + +\begin{LTXexample}[width=5cm] +\begin{pspicture}[showgrid=true,arrowscale=2](5,5) +\pnode(4.5,0.5){MyNode} +\psdot(MyNode) +\pnode(! \psGetNodeCenter{MyNode} + MyNode.x 4 sub MyNode.y 4 add){MySecondNode} +\psdot(MySecondNode) +\ncline[linecolor=red]{<->}{MyNode}{MySecondNode} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=5cm] +\begin{pspicture}[showgrid=true](5,5) +\rput(1.5,0.5){\trinode{CN}{NodeA}} +\rput(3.5,2.5){\trinode{EN}{NodeB}} +\pnode(! \psGetNodeCenter{CN} + CN.x 2 add CN.y 1 add ){MyCNode} +\ncline[linecolor=red]{<->}{MyCNode}{EN} +\ncline[linecolor=blue]{<->}{CN}{EN} +\end{pspicture} +\end{LTXexample} + +%-------------------------------------------------------------------------------------- +\section{\nxLcs{ncdiag} and \nxLcs{pcdiag}} +%-------------------------------------------------------------------------------------- +With the new option \Lkeyword{lineAngle} the lines drawn by the \Lcs{ncdiag} macro +can now have a specified gradient. Without this option one has to define the two +arms (which maybe zero) and PSTricks draws the connection between them. Now there +is only a static \Lkeyword{armA}, the second one \Lkeyword{armB} is calculated when an angle +\Lkeyword{lineAngle} is defined. This angle is the gradient of the intermediate line +between the two arms. The syntax of \Lcs{ncdiag} is + +\begin{BDef} +\Lcs{ncdiag}\OptArgs\Largb{node A}\Largb{node B}\\ +\Lcs{pcdiag}\OptArgs\Largs{node A}\Largs{node B} +\end{BDef} + + +\begin{tabularx}{\linewidth}{l|X} +name & meaning\\\hline +\Lkeyword{lineAngle} & angle of the intermediate line segment. Default is 0, which is the same +than using \Lcs{ncdiag} without the \Lkeyword{lineAngle} option.\tabularnewline +\end{tabularx} + + +\begin{LTXexample}[width=5.5cm] +\begin{pspicture}(5,6) + \circlenode{A}{A}\quad\circlenode{C}{C}% + \quad\circlenode{E}{E} + \rput(0,4){\circlenode{B}{B}} + \rput(1,5){\circlenode{D}{D}} + \rput(2,6){\circlenode{F}{F}} + \psset{arrowscale=2,linearc=0.2,% + linecolor=red,armA=0.5, angleA=90,angleB=-90} + \ncdiag[lineAngle=20]{->}{A}{B} + \ncput*[nrot=:U]{line I} + \ncdiag[lineAngle=20]{->}{C}{D} + \ncput*[nrot=:U]{line II} + \ncdiag[lineAngle=20]{->}{E}{F} + \ncput*[nrot=:U]{line III} +\end{pspicture} +\end{LTXexample} + + +The \Lcs{ncdiag} macro sets the \Lkeyword{armB} dynamically to the calculated value. Any +user setting of \Lkeyword{armB} is overwritten by the macro. The \Lkeyword{armA} could be set to +a zero length: + + +\begin{LTXexample}[width=4.5cm] +\begin{pspicture}(4,3) + \rput(0.5,0.5){\circlenode{A}{A}} + \rput(3.5,3){\circlenode{B}{B}} + {\psset{linecolor=red,arrows=<-,arrowscale=2} + \ncdiag[lineAngle=60,% + armA=0,angleA=0,angleB=180]{A}{B} + \ncdiag[lineAngle=60,% + armA=0,angleA=90,angleB=180]{A}{B}} +\end{pspicture} +\end{LTXexample} + + +\begin{LTXexample}[width=4.5cm] +\begin{pspicture}(4,3) + \rput(1,0.5){\circlenode{A}{A}} + \rput(4,3){\circlenode{B}{B}} + {\psset{linecolor=red,arrows=<-,arrowscale=2} + \ncdiag[lineAngle=60, + armA=0.5,angleA=0,angleB=180]{A}{B} + \ncdiag[lineAngle=60, + armA=0,angleA=70,angleB=180]{A}{B} + \ncdiag[lineAngle=60, + armA=0.5,angleA=180,angleB=180]{A}{B}} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=4.5cm] +\begin{pspicture}(4,5.5) + \cnode*(0,0){2pt}{A} \cnode*(0.25,0){2pt}{C} + \cnode*(0.5,0){2pt}{E}\cnode*(0.75,0){2pt}{G} + \cnode*(2,4){2pt}{B} \cnode*(2.5,4.5){2pt}{D} + \cnode*(3,5){2pt}{F} \cnode*(3.5,5.5){2pt}{H} + {\psset{arrowscale=2,linearc=0.2, + linecolor=red,armA=0.5, angleA=90,angleB=-90} + \pcdiag[lineAngle=20]{->}(A)(B) + \pcdiag[lineAngle=20]{->}(C)(D) + \pcdiag[lineAngle=20]{->}(E)(F) + \pcdiag[lineAngle=20]{->}(G)(H)} +\end{pspicture} +\end{LTXexample} + + +%-------------------------------------------------------------------------------------- +\section{\nxLcs{ncdiagg} and \nxLcs{pcdiagg}} +%-------------------------------------------------------------------------------------- +This is nearly the same as \Lcs{ncdiag} except that +\Lkeyword{armB}=0 and the \Lkeyword{angleB} value is computed by the +macro, so that the line ends at the node with an angle like a +\Lcs{pcdiagg} line. The syntax of \Lcs{ncdiagg}/\Lcs{pcdiagg} +is + +\begin{BDef} +\Lcs{ncdiag}\OptArgs\Largb{node A}\Largb{node B}\\ +\Lcs{pcdiag}\OptArgs\Largs{node A}\Largs{node B} +\end{BDef} + +\begin{LTXexample}[width=5cm] +\begin{pspicture}(4,6) + \psset{linecolor=black} + \circlenode{A}{A}\quad\circlenode{C}{C}\quad% + \circlenode{E}{E} + \rput(0,4){\circlenode{B}{B}} + \rput(1,5){\circlenode{D}{D}} + \rput(2,6){\circlenode{F}{F}} + {\psset{arrowscale=2,linearc=0.2, + linecolor=red,armA=0.5, angleA=90} + \ncdiagg[lineAngle=-160]{->}{A}{B} + \ncput*[nrot=:U]{line I} + \ncdiagg[lineAngle=-160]{->}{C}{D} + \ncput*[nrot=:U]{line II} + \ncdiagg[lineAngle=-160]{->}{E}{F} + \ncput*[nrot=:U]{line III}} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=5cm] +\begin{pspicture}(4,6) + \psset{linecolor=black} + \cnode*(0,0){2pt}{A} \cnode*(0.25,0){2pt}{C} + \cnode*(0.5,0){2pt}{E}\cnode*(0.75,0){2pt}{G} + \cnode*(2,4){2pt}{B} \cnode*(2.5,4.5){2pt}{D} + \cnode*(3,5){2pt}{F} \cnode*(3.5,5.5){2pt}{H} + {\psset{arrowscale=2,linearc=0.2, + linecolor=red,armA=0.5, angleA=90} + \pcdiagg[lineAngle=20]{->}(A)(B) + \pcdiagg[lineAngle=20]{->}(C)(D) + \pcdiagg[lineAngle=20]{->}(E)(F) + \pcdiagg[lineAngle=20]{->}(G)(H)} +\end{pspicture} +\end{LTXexample} + +The only catch for \Lcs{ncdiagg} is that you need the right +value for \Lkeyword{lineAngle}. If the node connection is on the wrong +side of the second node, then choose the corresponding angle, +e.\,g.: if $20$ is wrong then take $-160$, which differs by $180$. + + +\begin{LTXexample}[width=4cm] +\begin{pspicture}(4,1.5) + \circlenode{a}{A} + \rput[l](3,1){\rnode{b}{H}} + \ncdiagg[lineAngle=60,angleA=180,armA=.5,nodesepA=3pt,linecolor=blue]{b}{a} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=4cm] +\begin{pspicture}(4,1.5) + \circlenode{a}{A} + \rput[l](3,1){\rnode{b}{H}} + \ncdiagg[lineAngle=60,armA=.5,nodesepB=3pt,linecolor=blue]{a}{b} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=4cm] +\begin{pspicture}(4,1.5) + \circlenode{a}{A} + \rput[l](3,1){\rnode{b}{H}} + \ncdiagg[lineAngle=-120,armA=.5,nodesepB=3pt,linecolor=blue]{a}{b} +\end{pspicture} +\end{LTXexample} + +%-------------------------------------------------------------------------------------- +\section{\nxLcs{ncbarr}} +%-------------------------------------------------------------------------------------- +This has the same behaviour as \Lcs{ncbar}, but has 5 segments +and all are horizontal ones. This is the reason why \Lkeyword{angleA} +must be $0$ or alternatively $180$. All other values are set to +$0$ by the macro. The intermediate horizontal line is symmetrical +to the distance of the two nodes. + +\begin{BDef} +\Lcs{ncbarr}\OptArgs\Largb{node A}\Largb{node B}\\ +\end{BDef} + +\begin{LTXexample}[width=3.5cm] +\psset{arrowscale=2}% +\circlenode{X}{X}\\[1cm] +\circlenode{Y}{Y} +\ncbarr[angleA=0,arrows=->,arrowscale=2]{X}{Y} +\end{LTXexample} + +\begin{LTXexample}[width=3.5cm] +\psset{arrowscale=2}% +\ovalnode{X}{Xxxxx}\\[1cm] +\circlenode{Y}{Yyyy} +\ncbarr[angleA=180,arrows=->,arrowscale=2,linecolor=red]{X}{Y} +\end{LTXexample} + +\begin{LTXexample}[width=3.5cm] +\psset{arrowscale=2}% +\ovalnode{X}{Xxxxx}\\[1cm] +\circlenode{Y}{Yyyy} +\ncbarr[angleA=20,arm=1cm,arrows=->,arrowscale=2]{X}{Y} +\end{LTXexample} + +%-------------------------------------------------------------------------------------- +\section{\nxLcs{psLNode} and \nxLcs{psLCNode}} +%-------------------------------------------------------------------------------------- +\Lcs{psLNode} interpolates the Line $\overline{AB}$ by the given value and sets a node at this +point. The syntax is +% +\begin{BDef} +\Lcs{psLNode}\Largs{P1}\Largs{P2}\Largb{value}\Largb{node name}\\ +\Lcs{psLCNode}\Largs{P1}\Largb{value 1}\Largs{P2}\Largb{value 2}\Largb{node name} +\end{BDef} + +\begin{LTXexample}[width=5cm] +\begin{pspicture}(5,5) +\psgrid[subgriddiv=0,griddots=10] +\psset{linecolor=red} +\psline{o-o}(1,1)(5,5) +\psLNode(1,1)(5,5){0.75}{PI} +\qdisk(PI){4pt} +\psset{linecolor=blue} +\psline{o-o}(4,3)(2,5) +\psLNode(4,3)(2,5){-0.5}{PII} +\qdisk(PII){4pt} +\end{pspicture} +\end{LTXexample} + + +\bigskip +The \Lcs{psLCNode} macro builds the linear combination of the two given +vectors and stores the end of +the new vector as a node. All vectors start at $(0,0)$, so a \Lcs{rput} maybe +appropriate. The syntax is + + +\begin{LTXexample}[width=5cm] +\begin{pspicture}[showgrid=true](5,3) +\psset{linecolor=black} +\psline[linestyle=dashed]{->}(3,1.5) +\psline[linestyle=dashed]{->}(0.375,1.5) +\psset{linecolor=red} +\psline{->}(2,1)\psline{->}(0.5,2) +\psLCNode(2,1){1.5}(0.5,2){0.75}{PI} +\psline[linewidth=2pt]{->}(PI) +\psset{linecolor=black} +\psline[linestyle=dashed](3,1.5)(PI) +\psline[linestyle=dashed](0.375,1.5)(PI) +\end{pspicture} +\end{LTXexample} + + +%-------------------------------------------------------------------------------------- +\section{\nxLcs{nlput} and \nxLcs{psLDNode}} +%-------------------------------------------------------------------------------------- +\Lcs{ncput} allows you to set a label relative to the first node +of the last node connection. With \Lcs{nlput} this can be done +absolute to a given node. The syntax is different to the other +node connection macros. It uses internally the macro +\Lcs{psLDNode} which places a node absolute to two given points, +starting from the first one. + +\begin{BDef} +\Lcs{nlput}\OptArgs\Largs{A}\Largs{B}\Largb{distance}\Largb{text}\\ +\Lcs{psLDNode}\OptArgs\Largs{A}\Largs{B}\Largb{distance}\Largb{node name} +\end{BDef} + + +\begin{LTXexample}[width=5cm] +\begin{pspicture}(5,2) +\pnode(0,0){A} +\pnode(5,2){B} +\ncline{A}{B} +\psLDNode(A)(B){1.5cm}{KN}\qdisk(KN){2pt} +\nlput[nrot=:U](A)(B){1cm}{Test} +\nlput[nrot=:D](A)(B){2cm}{Test} +\nlput[nrot=:U](A)(B){3cm}{Test} +\nlput(A)(B){4cm}{Test} +\end{pspicture} +\end{LTXexample} + +\section{Extensions} +\subsection{Quick overview} +All macros in this section are connected in one way or other with the +construction or deployment of +one or more nodes of type \Lcs{pnode}, which is to say in effect, +named points. For the remainder of this section, node always means \Lcs{pnode}. +Nodes are one of +the most powerful features of pstricks---the ``trickiest tricks'' in the words of +its originator. If used without appropriate caution, they can produce PostScript errors +that can be difficult to track down. For example, suppose you have defined a node \texttt{A} +by \verb|\pnode(1,1){A}|, and then, a little later, you want to move the node a bit to the +right, and you write \verb|\pnode([nodesep=.5cm]A){A}|. On processing the file you will +see an error message from ghostscript: \Lps{stackunderflow}\verb| in --exch--|. +The lesson is: you may not assign a node name if a node by that name is involved +explicitly in its definition. To reassign a node name safely, you have to write instead something like +\begin{verbatim} +\pnode([nodesep=.5cm]A){Atemp} +\pnode(Atemp){A} +\end{verbatim} +This problem afflicts a number of other node-forming macros based on a \Lcs{pnode} construction, as most are. + +Nodes are more complicated than they appear. Each node is stored not only with a recipe +for finding its coordinates, but also with the coordinate system in effect when it was +defined. Part of the retrieval process involves modifying the coordinates if necessary +so that they represent the same point on the page even if the coordinate system has +changed. This is important, but has some unexpected consequences. Normally, the simplest +way to translate an object is with \Lcs{rput}. +\begin{verbatim} +\pnode(1,1){P}% define P as (1,1) +\rput(2,3){\psdot{P}}% places dot at original P=(1,1) +\end{verbatim} +is different from +\begin{verbatim} +\rput(2,3){\pnode(1,1){P}\psdot{P}} +% places dot at (1,1)+(2,3) +\end{verbatim} +Effectively, \Lcs{rput} and \Lcs{uput} are not useful for translating previously +defined nodes, but they are useful for defining new nodes relative to fixed positions. + +The new macros in this section +are of several kinds: (i) utility macros, some used +internally by the package and some of general use; (ii) macros that manipulate one or +more nodes to produce other nodes; (iii) constructions intended to be used with nodes and +node sequences. By a node sequence is meant one or more nodes having a common root name +followed by an index---eg, P0 P1 P2 ... P5 is a node sequence with root name P. It is +easy to define such node sequences using the \Lcs{multido} macro, or using one of a +number of macros in this section. + +\subsection{Node expressions} +A number of macros in the package (eg, \Lcs{psxline}) permit the use of node expressions, +by which is meant an expression like +\begin{verbatim} +.25(1,3)+.333(2;90)-1.2([nodesep=.5cm]Q) +\end{verbatim} +which specifies a linear combination of points (the items enclosed in parentheses) +specified in any manner acceptable to \Lcs{SpecialCoor}. +%The items themselves cannot +%themselves be node expressions, as they are not acceptable to \Lcs{SpecialCoor}. + +Node expressions are handled by \Lcs{nodexn}, which calls the macros \Lcs{hasparen} and +\Lcs{parsenodexn} to do the real work. If you write code that needs to be able to handle node expressions, you use + +\begin{BDef} +\Lcs{nodexn}\Largb{expr}\Largb{nodename} +\end{BDef} + +which returns a node \verb|| once \verb|| has been fully parsed. It is safe to +reuse a node name, as in +\begin{verbatim} +\nodexn{(P)+.5(1,2)}{P} +\end{verbatim} + +The following macros amount to special cases of node expressions. +\begin{BDef} +\Lcs{AtoB}\Largr{A}\Largr{B}\Largb{C} +\end{BDef} + defines a node by name C essentially as B-A, as vectors. It is safe to use + \Lcs{AtoB}\verb|(Q)(P){P}| and \Lcs{AtoB}\verb|(Q)(P){Q}|. + +\begin{BDef} +\Lcs{AplusB}\Largr{A}\Largr{B}\Largb{C} +\end{BDef} + defines node by name C essentially as A+B, as vectors. It is safe to use + \Lcs{AplusB}\verb|(Q)(P){P}| and \Lcs{AplusB}\verb|(Q)(P){Q}|. + +\begin{BDef} +\Lcs{midAB}\Largr{A}\Largr{B}\Largb{C} +\end{BDef} + + defines node by name C essentially as $(A+B)/2$, as vectors. It is safe to use \Lcs{midAB}\verb|(Q)(P){P}| + and \Lcs{midAB}\verb|(Q)(P){Q}|. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,2.5) +\psset{arrows=->,arrowscale=1.5} +\pnode(2,1){P}\pnode(.5,1){Q} +\AtoB(Q)(P){QP} +\AplusB(Q)(P){R} +\psline(0,0)(P)\uput[-45](P){P} +\psline(0,0)(Q)\uput[135](Q){Q} +\psline(0,0)(QP)\uput[-70](QP){QP} +\psline(0,0)(R)\uput[160](R){R} +\psline[linestyle=dashed](Q)(P) +\psline[linestyle=dashed](Q)(R) +\psline[linestyle=dashed](P)(R) +\end{pspicture} +\end{LTXexample} + + +\subsection{The main macros} +\begin{BDef} +\Lcs{normalvec}\Largr{coords}\Largb{nodename} +\end{BDef} +For example, +\begin{verbatim} +\normalvec(P){P}\normalvec(2;30){Q} +\end{verbatim} +first redefines the node {\tt P} as a node whose vector interpretation is of the same +length as the original {\tt P}, but rotated 90 degrees. The second instance has the +same effect as \Lcs{pnode}\verb|(2;120){Q}|. +\begin{BDef} +\Lcs{curvepnode}\Largb{tval}\Largb{expression in t}\Largb{nodename} +\end{BDef} + +For example, +\begin{verbatim} +\curvepnode{1}{cos(t) | sin(t)}{P} +\end{verbatim} + sets a node named {\tt P} at \verb|(cos(1), sin(1))| and a node named {\tt Ptang} + which represents a unit vector in the tangent direction to the curve at {\tt P}. + The expression in {\tt t} in this case is algebraic, which is detected automatically by the macro. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,2) +\def\exn{cos(t) | sin(t)} +\psparametricplot[algebraic]{0}{2}{\exn} +\curvepnode{1}{\exn}{P} +\psdot(P)\uput[45](P){P} +\end{pspicture} +\end{LTXexample} +\vspace{2pc} + +\begin{BDef} +\Lcs{psparnode}\Largb{t}\Largb{expression in t}\Largb{} +\end{BDef} + is called by the command \Lcs{curvename} if the expression is PostScript, not algebraic. + +\begin{BDef} +\Lcs{algparnode}\Largb{t}\Largb{expression in t}\Largb{nodename} +\end{BDef} + is called by the command \Lcs{curvename} if the expression is algebraic, not PostScript. + +\begin{BDef} +\Lcs{curvepnodes}\Largb{tmin}\Largb{tmax}\Largb{expr. in t}\Largb{nodeRoot} +\end{BDef} + Uses current setting of plotpoints (default 50) to define a node sequence of points along the curve. Eg, +\begin{verbatim} +\curvepnodes[plotpoints=100]{0}{1}{t+t^2 | Ex(-t)}{P} +\end{verbatim} + sets nodes {\tt P0 .. P99} at equally spaced {\tt t} values along the curve, + and assigns the macro \Lcs{Pnodecount} to 99, the highest index. The expression in {\tt t} + may be either algebraic or PostScript, and is handled automatically. The values + \verb|, | may be expressed using PostScript---eg, \verb|{Pi neg}{PiDiv2}|. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,3) +\def\exn{t+t^2 | 2*Ex(-t)} +\psset{plotpoints=100} +\psparametricplot[algebraic]{0}{1}{\exn} +\curvepnodes{0}{1}{\exn}{P} +\psdot(P50)\uput[75](P50){P50} +\psdot(P99)\uput[75](P99){P99} +\end{pspicture} +\end{LTXexample} + + +\begin{BDef} +\Lcs{fnpnode}\Largb{xval}\Largb{expression in x}\Largb{nodename} +\end{BDef} + + sets a single node on the graph. Eg, + +\begin{verbatim} +\fnpnode{.5}{x x 1 add mul 2 div}{P} +\end{verbatim} + declares the node P at the point x=0.5 on the graph. It has the same effect as + +\begin{verbatim} +\pnode(!/x 0.5 def x x x 1 add mul 2 div}){P} +\end{verbatim} + + If your expression in {\tt t} is algebraic, you must specify the keyword {\tt algebraic}, as in + \Lcs{fnpnode}\verb|[algebraic]{0.5}{x*(x+1)/2}{P}|. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,3) +\def\exn{x x 1 add mul 2 div} +\psplot{0}{2}{\exn} +\fnpnode{0.5}{\exn}{Q} +\psdot(Q)\uput[-45](Q){Q} +\end{pspicture} +\end{LTXexample} +\vspace{2pc} + + + +\begin{BDef} +\Lcs{fnpnodes}\Largb{xmin}\Largb{xmax}\Largb{expression in x}\Largb{nodeRoot} +\end{BDef} +Is similar to \Lcs{curvenodes}, but for the graph of a function. The keyword \Lkeyword{algebraic} +must be specified if your expression is indeed algebraic. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,3) +\def\exn{x x 1 add mul 2 div} +\psplot{0}{2}{\exn} +\fnpnodes[plotpoints=10]{0}{2}{\exn}{A} +\psdot(A4)\uput[-45](A4){A4} +\end{pspicture} +\end{LTXexample} +\vspace{2pc} + + +\begin{BDef} +\Lcs{shownode}\Largr{P} +\end{BDef} +is a debugging tool, which displays in the console window the coordinates of node P. +This will not appear until the final stage of processing the PostScript file. You will +get a PostScript error if the node you specify is undefined. + +\begin{BDef} +\Lcs{getnodelist}\Largb{node root name}\Largb{next command} +\end{BDef} + is useful in writing pstricks macros, where there is a list of parenthesized coordinates + to be read and turned into a node sequence, following which \verb|| is followed. + +\begin{BDef} +\Lcs{pnodes}\Largb{P}\Largr{1,2}\Largr{2;3}\ldots +\end{BDef} +is effectively \Lcs{getnodelist}\Largb{P}\Largb{}\verb|(1,2)(2;3)...|, just a quick way to +turn a list of coordinates into a node sequence P0 P1 ... + +\begin{BDef} +\Lcs{psnline}\OptArgs\Largb{arrows}\Largr{coors}\Largb{name} +\end{BDef} + for example, expects that there are nodes named P3..P8, and gives the same result as +\begin{verbatim} +\psline[linewidth=1pt]{->}(P3)(P4)(P5)(P6)(P7)(P8) +\end{verbatim} + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(2.5,2) +\pnodes{P}(.1,.1)(1;10)(*2 {x^2/4})(0,1.4) +%defines P0..P3--now join them +\psnline[arrowscale=2]{-D>}(0,3){P} +\end{pspicture} +\end{LTXexample} +\vspace{2pc} + + +\begin{BDef} +\Lcs{psLCNodeVar}\Largr{node A}\Largr{node B}\Largr{factorA,factorB}\Largb{node name} +\end{BDef} + +is similar to \Lcs{psLCNode}, + and provides a means of forming a linear combination of two nodes, thought of as vectors. Where +\begin{verbatim} +\psLCNode(A){a}(B){b}{C} +\end{verbatim} + effectively makes \verb|C=aA+bB|, +\begin{verbatim} +\psLCNodeVar(A)(B)(a,b){C} +\end{verbatim} +does the same, but the third argument \verb|(a,b)| may be specified in any form acceptable +to \Lcs{SpecialCoor}. (With \Lcs{psLCNode}, each coefficient may be specified in PostScript code.) +One other difference is that \Lcs{psLCNodeVar} allows the reuse of a node name in place. For example, +it is possible to write +\begin{verbatim} +\psLCNodeVar(A)(B)(2,3){A}% symbol A reassigned +\end{verbatim} +where the equivalent in \Lcs{psLCNode} will lead to a PostScript error. Since \Lcs{AtoB} and \Lcs{AplusB} +are defined using \Lcs{psLCNodeVar}, they also allow node name reuse: \Lcs{AtoB}\verb|(Q)(P){P}| is legal. + +\begin{BDef} +\Lcs{psRelNodeVar}\Largr{node A}\Largr{node B}\Largr{radius;angle}\Largb{node name} +\end{BDef} +is similar to \Lcs{psRelNode}, and provides a means of scaling and rotating a line segment AB about A. The effect of +\begin{verbatim} +\psRelNodeVar(A)(B)(2;30){C} +\end{verbatim} + is the same as + \begin{verbatim} +\psRelNode[angle=30](A)(B){2}{C} +\end{verbatim} + but the third argument (2;30) may be specified in any form acceptable to \Lcs{SpecialCoor}, + while specifying the angle argument in \Lcs{psRelNode} using PostScript is not possible. + Note that \Lcs{psRelNodeVar}\verb|(0,0)(A)(B){C}| may be interpreted as defining {\tt C} to + be the complex product of {\tt A} and {\tt B}. + + +\begin{LTXexample}[width=5cm] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\pnode(0,.5){P}\pnode(1.5,.75){Q} +\psRelNodeVar(P)(Q)(2;20){R} +\psline(Q)(P)\uput[-45](P){P} +\uput[-70](Q){Q} +\psline(P)(R)\uput[-70](R){R} +\end{pspicture} +\end{LTXexample} + + +\begin{BDef} +\Lcs{psRelLineVar}\Largr{node A}\Largr{node B}\Largr{radius;angle}\Largb{node name} +\end{BDef} + stands to \Lcs{psRelLine} as \Lcs{psRelNodeVar} stands relative to \Lcs{psRelNode}. + +\Lcs{psRelLine}\verb|Var(A)(B)(a;b){C}| defines the node {\tt C}, and, in addition, draws the line segment {\tt AC}. + +\begin{BDef} +\Lcs{rhombus}\Largb{edge length}\Largr{A}\Largb{B}\Largb{C}\Largb{D} +\end{BDef} +computes the two remaining vertices C, D given two opposing vertices A, B +of a rhombus with specified edge length. It does not draw the rhombus, which +could be handled easily by \Lcs{psline}. Internally, \Lcs{rhombus} uses +\Lcs{psRelNodeVar}. + +\begin{BDef} +\Lcs{psrline}\Largr{P}\Largr{Q}\ldots +\end{BDef} + is like \Lcs{psline}, but drawing a line starting at (P), with successive + increments (Q)... It has the same options as\Lcs{psline}. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\pnode(0,.5){P}\pnode(1,1){Q} +\psrline{->}(P)(Q)(2;20) +\uput[-45](P){P} +\end{pspicture} +\end{LTXexample} + +\begin{BDef} +\Lcs{psxline}\Largr{basept}\Largb{nodexpr1}\Largb{nodexpr2} +\end{BDef} +The {\tt x} here stands for expression. The idea is that one builds a +line from \verb|+| to \verb|+|. + +\begin{LTXexample}[width=.35\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,4) +\def\pfn{t | t^2/4} +\psparametricplot[algebraic]{0}{3.5}{\pfn} +\curvepnode{2}{\pfn}{P}% sets P, Ptang +\normalvec(Ptang){Q}\uput[-45](P){P} +\psxline[linecolor=red]{<->}(P){-(Ptang)}{1.5(Ptang)} +\psxline[linecolor=blue]{->}(P){}{.5(Q)}%can use {} for {(0,0)} +\end{pspicture} +\end{LTXexample} +\vspace{2pc} + +\begin{BDef} +\Lcs{polyIntersections}\Largb{Name1}\Largb{Name2}\Largr{A}\Largr{B}\Largb{P}\ldots\\ +\Lcs{polyIntersections}\Largb{Name1}\Largb{Name2}\Largr{A}\Largr{B}\Largb{P}\Largb{n}\\ +\end{BDef} + +is the most complicated macro in the collection. It has two forms. + +\begin{verbatim} +\polyIntersections{}{}(A)(B)(1,2)(3;30)(6,5)... +\end{verbatim} + +defines the polyline \verb|L=(1,2)(3;30)(6,5)...|, and computes the two points of +intersection closest to {\tt A} in each direction with the directed line starting at +A heading toward B. The first intersection point in the positive direction is named +\verb||, and the first intersection point in the opposite direction (from A) +is named \verb||. If one or other of these intersections is empty, the nodes are +set to remote points on the line {\tt AB}. The effect of the line joining the constructed +nodes depends on the location of {\tt A} and {\tt B} relative to {\tt L}, with two cases worth noting. +\begin{itemize} +\item if {\tt L} is closed and if {\tt A, B} are interior to one of its components, the +resulting line extends across that component of {\tt L}, and contains {\tt AB}. +\item If {\tt L} is simple and closed, one of {\tt A, B} is inside and the other outside, +the resulting line segment will contain {\tt A} but not {\tt B}. +\end{itemize} + +\begin{verbatim} +\polyIntersections{}{}(A)(B){P}{n} +\end{verbatim} + +has exactly the same effect as + +\begin{verbatim} +\polyIntersections{}{}(A)(B)(P0)(P1)...(Pn) +\end{verbatim} + +assuming \verb|P0...Pn| to be previously defined nodes. + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\pnodes{P}(0,.5)(3,.5)(2.5,2)(.5,2.5)(0,.5) +\pnode(1,1.1){A}\pnode(2,1.5){B} +\polyIntersections{N1}{N2}(A)(B){P}{4} +\psnline(0,4){P} +\psdots(A)(B)\psline(N1)(N2) +\uput[-60](A){A}\uput[-60](B){B} +\uput[0](N1){N1}\uput[-180](N2){N2} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\pnodes{P}(0,.5)(3,.5)(2.5,2)(.5,2.5)(0,.5) +\pnode(1,1.1){A}\pnode(2,3){B} +\polyIntersections{N1}{N2}(A)(B){P}{4} +\psnline(0,4){P} +\psdots(A)(B)\psline(N1)(N2) +\uput[-60](A){A}\uput[-60](B){B} +\uput[90](N1){N1}\uput[-90](N2){N2} +\end{pspicture} +\end{LTXexample} + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\def\fn{1.5+sin(t)+.4*sin(2*t)% + | 1+cos(t)+.2*cos(2*t)+.2*sin(4*t)}% +\pnode(1,1.1){A}\pnode(2,1.2){B} +\psset{plotpoints=100} +\psparametricplot[algebraic]{0}{6.283}{\fn} +\curvepnodes{0}{6.283}{\fn}{Z} +\polyIntersections{N1}{N2}(A)(B){Z}{99} +\psdots(A)(B)\psline(N1)(N2) +\uput[-60](A){A}\uput[-60](B){B} +\uput[0](N1){N1}\uput[220](N2){N2} +\end{pspicture} +\end{LTXexample} +\vspace{1pc} + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\def\fn{1.5+sin(t)+.4*sin(2*t)% + | 1+cos(t)+.2*cos(2*t)+.2*sin(4*t)}% +\pnode(.8,.6){A}\pnode(2.5,-.5){B} +\psset{plotpoints=100} +\psparametricplot[algebraic]{0}{6.283}{\fn} +\curvepnodes{0}{6.283}{\fn}{Z} +\polyIntersections{N1}{N2}(A)(B){Z}{99} +\psdots(A)(B)\psline(N1)(N2) +\uput[90](A){A}\uput[-60](B){B} +\uput[70](N1){N1}\uput[180](N2){N2} +\end{pspicture} +\end{LTXexample} +\vspace{1pc} + + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\pnodes{P}(0,.5)(3,.5)(2.5,2)(.5,2.5)(0,.5) +\pnode(1,1.1){A}\pnode(2,1.5){B} +\polyIntersections{N1}{N2}(A)(B){P}{3} +\psnline(0,3){P} +\psdots(A)(B) +\psclip{\psframe[linestyle=none](-.5,-.5)(3.5,2.5)} +\psline(N1)(N2)\endpsclip +\uput[-60](A){A}\uput[-60](B){B} +\uput[0](N1){N1}\uput[-180](N2){N2} +\end{pspicture} +\end{LTXexample} +\vspace{1pc} + +\begin{LTXexample}[width=.375\textwidth] +\begin{pspicture}[showgrid=true](-.5,-.5)(3.5,3) +\def\fn{x+sin(2*x)} +\psplot[algebraic]{0}{3.14}{\fn} +\fnpnodes[algebraic]{0}{3.14}{\fn}{P} +\pnode(.6,.8){A}\pnode(1.5,1.1){B} +\polyIntersections{N1}{N2}(A)(B){P}{49} +\psdots(A)(B) +\uput[-90](A){A}\uput[-90](B){B} +\psline(N1)(N2) +\psset{linestyle=dashed} +\psline(N1)(N1 | 0,0) +\psline(N2)(N2 | 0,0) +\uput[70](N1){N1}\uput[170](N2){N2} +\end{pspicture} +\end{LTXexample} +\vspace{1pc} + +\begin{BDef} +\Lcs{ArrowNotch}\Largb{}\Largb{}\Largb{}\Largb{} +\end{BDef} +takes as inputs the root name of the node sequence, the index at which the arrow +tip is to be drawn, and the direction (one of \verb+>,<+) of the arrow. It then +constructs the notch as a node with name \verb||. The arrowhead may then be +drawn with a command like \Lcs{psline}\verb|{->}(N)(P3)|, assuming the tip was to be {\tt P3} +and the notch was {\tt N}. Keep in mind that the macro takes its settings for linewidth, +arrowscale, etc from the current values, so it is generally preferable to include them +in a \Lcs{psset} before drawing the curve and calling \Lcs{ArrowNotch}. +(Alternatively, they may be included as optional settings in \Lcs{ArrowNotch}.) +The first example below shows a case where the native arrow direction is not +good. The second shows how to make a version using \Lcs{ArrowNotch}. Notice that the minimum and maximum +parameter values in the second example had to be modified to keep the curve +from protruding near the end arrowheads. + +\Lcs{ArrowNotch} is a computationally expensive macro (quadratic in {\tt plotpoints}) designed to +improve the placement of arrows on curves in those cases (high curvature, large values of +linewidth, arrowscale, etc) where the native arrow direction is not optimal. The macro +depends on the construction of a node sequence, say {\tt P0..Pn}, of samples of the curve +(eg, with \Lcs{curvepnodes}) from which it computes the position of the notch of the arrow +so that, when drawn, the arrow notch will be located on the curve in all cases. It operates +with only two particular arrow shapes---those arrows specified with either +\verb|->| or \verb|-D>|, or their reverses. + + +\begin{LTXexample}[width=.375\textwidth] +\def\fn{1.5+1.5*cos(t) | 1+sin(t)} +\psset{linewidth=2pt,arrowscale=3} +\begin{pspicture}(0,0)(3.5,3) +\psparametricplot[algebraic,arrows=<->]{PiDiv2 neg}{Pi}{\fn} +\end{pspicture} +\end{LTXexample} +\vspace{1pc} + +\begin{LTXexample}[width=.375\textwidth] +\def\fn{1.5+1.5*cos(t) | 1+sin(t)} +\psset{linewidth=2pt,arrowscale=3} +\begin{pspicture}(0,0)(3.5,3) +\curvepnodes{PiDiv2 neg}{Pi}\fn{P}%create P0..P49 +\ArrowNotch{P}{0}{<}{Q} +\ArrowNotch{P}{49}{>}{R} +\ArrowNotch[arrowscale=1.5]{P}{27}{>}{S} +\psparametricplot[algebraic]{-1.47}{2.95}{\fn} +\psline{->}(Q)(P0) +\psline{->}(R)(P49) +\psline[arrowscale=1.5]{->}(S)(P27) +\end{pspicture} +\end{LTXexample} + + +\section{List of all optional arguments for \texttt{pst-node}} + +\xkvview{family=pst-node,columns={key,type,default}} + + +\nocite{*} +\bgroup +\RaggedRight +\bibliographystyle{plain} +\bibliography{pst-node-doc} +\egroup + +\printindex + + +\end{document} -- cgit v1.2.3