From 90477657d2f8b99cc14fd103361815a3363bfee2 Mon Sep 17 00:00:00 2001 From: Peter Breitenlohner Date: Wed, 24 Dec 2014 11:25:20 +0000 Subject: Move texk/lacheck 1.26 => utils/lacheck 1.28 git-svn-id: svn://tug.org/texlive/trunk@35896 c570f23f-e606-0410-a88d-b1316a301751 --- Build/source/Makefile.in | 2 +- Build/source/configure | 40 +- Build/source/doc/Makefile.in | 2 +- Build/source/libs/Makefile.in | 2 +- Build/source/libs/configure | 40 +- Build/source/m4/ChangeLog | 5 + Build/source/m4/kpse-pkgs.m4 | 2 +- Build/source/texk/Makefile.in | 2 +- Build/source/texk/README | 3 - Build/source/texk/configure | 49 +- Build/source/texk/lacheck/ChangeLog | 76 - Build/source/texk/lacheck/Makefile.am | 35 - Build/source/texk/lacheck/Makefile.in | 1286 -- Build/source/texk/lacheck/ac/withenable.ac | 7 - Build/source/texk/lacheck/aclocal.m4 | 1192 -- Build/source/texk/lacheck/config.h.in | 179 - Build/source/texk/lacheck/configure | 15727 ------------------- Build/source/texk/lacheck/configure.ac | 29 - .../texk/lacheck/lacheck-1.26-PATCHES/ChangeLog | 23 - .../texk/lacheck/lacheck-1.26-PATCHES/TL-Changes | 9 - .../lacheck/lacheck-1.26-PATCHES/patch-01-WIN32 | 14 - .../lacheck/lacheck-1.26-PATCHES/patch-02-ANSI | 176 - .../lacheck-1.26-PATCHES/patch-03-unsigned-char | 56 - .../lacheck/lacheck-1.26-PATCHES/patch-04-manpage | 18 - .../patch-05-never-interactive | 12 - .../lacheck-1.26-PATCHES/patch-06-buffer-overrun | 144 - Build/source/texk/lacheck/lacheck-1.26/Makefile | 97 - Build/source/texk/lacheck/lacheck-1.26/lacheck.c | 4699 ------ Build/source/texk/lacheck/lacheck-1.26/lacheck.hlp | 118 - Build/source/texk/lacheck/lacheck-1.26/lacheck.l | 1096 -- Build/source/texk/lacheck/lacheck-1.26/lacheck.man | 110 - .../source/texk/lacheck/lacheck-1.26/make_vms.com | 16 - Build/source/texk/lacheck/lacheck-1.26/test.old | 33 - Build/source/texk/lacheck/lacheck-1.26/test.tex | 42 - Build/source/texk/lacheck/lacheck.test | 10 - Build/source/utils/Makefile.in | 2 +- Build/source/utils/README | 2 + Build/source/utils/configure | 49 +- Build/source/utils/lacheck/ChangeLog | 92 + Build/source/utils/lacheck/Makefile.am | 23 + Build/source/utils/lacheck/Makefile.in | 1184 ++ Build/source/utils/lacheck/ac/withenable.ac | 7 + Build/source/utils/lacheck/aclocal.m4 | 1187 ++ Build/source/utils/lacheck/config.h.in | 29 + Build/source/utils/lacheck/configure | 5251 +++++++ Build/source/utils/lacheck/configure.ac | 26 + Build/source/utils/lacheck/lacheck.c | 4699 ++++++ Build/source/utils/lacheck/lacheck.hlp | 118 + Build/source/utils/lacheck/lacheck.l | 1096 ++ Build/source/utils/lacheck/lacheck.man | 108 + Build/source/utils/lacheck/lacheck.test | 10 + Build/source/utils/lacheck/make_vms.com | 16 + Build/source/utils/lacheck/test.old | 33 + Build/source/utils/lacheck/test.tex | 42 + 54 files changed, 14023 insertions(+), 25302 deletions(-) delete mode 100644 Build/source/texk/lacheck/ChangeLog delete mode 100644 Build/source/texk/lacheck/Makefile.am delete mode 100644 Build/source/texk/lacheck/Makefile.in delete mode 100644 Build/source/texk/lacheck/ac/withenable.ac delete mode 100644 Build/source/texk/lacheck/aclocal.m4 delete mode 100644 Build/source/texk/lacheck/config.h.in delete mode 100755 Build/source/texk/lacheck/configure delete mode 100644 Build/source/texk/lacheck/configure.ac delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/ChangeLog delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/TL-Changes delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-01-WIN32 delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-02-ANSI delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-03-unsigned-char delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-04-manpage delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-05-never-interactive delete mode 100644 Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-06-buffer-overrun delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/Makefile delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/lacheck.c delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/lacheck.hlp delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/lacheck.l delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/lacheck.man delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/make_vms.com delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/test.old delete mode 100644 Build/source/texk/lacheck/lacheck-1.26/test.tex delete mode 100755 Build/source/texk/lacheck/lacheck.test create mode 100644 Build/source/utils/lacheck/ChangeLog create mode 100644 Build/source/utils/lacheck/Makefile.am create mode 100644 Build/source/utils/lacheck/Makefile.in create mode 100644 Build/source/utils/lacheck/ac/withenable.ac create mode 100644 Build/source/utils/lacheck/aclocal.m4 create mode 100644 Build/source/utils/lacheck/config.h.in create mode 100755 Build/source/utils/lacheck/configure create mode 100644 Build/source/utils/lacheck/configure.ac create mode 100644 Build/source/utils/lacheck/lacheck.c create mode 100644 Build/source/utils/lacheck/lacheck.hlp create mode 100644 Build/source/utils/lacheck/lacheck.l create mode 100644 Build/source/utils/lacheck/lacheck.man create mode 100755 Build/source/utils/lacheck/lacheck.test create mode 100644 Build/source/utils/lacheck/make_vms.com create mode 100644 Build/source/utils/lacheck/test.old create mode 100644 Build/source/utils/lacheck/test.tex (limited to 'Build') diff --git a/Build/source/Makefile.in b/Build/source/Makefile.in index 3071a286758..cf204a900d9 100644 --- a/Build/source/Makefile.in +++ b/Build/source/Makefile.in @@ -124,6 +124,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \ $(top_srcdir)/version.ac \ $(top_srcdir)/utils/devnag/ac/withenable.ac \ + $(top_srcdir)/utils/lacheck/ac/withenable.ac \ $(top_srcdir)/utils/m-tx/ac/withenable.ac \ $(top_srcdir)/utils/pmx/ac/withenable.ac \ $(top_srcdir)/utils/ps2eps/ac/withenable.ac \ @@ -157,7 +158,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ $(top_srcdir)/texk/dvisvgm/ac/dvisvgm.ac \ $(top_srcdir)/texk/dvisvgm/ac/libgs.ac \ $(top_srcdir)/texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/texk/lacheck/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/texk/makeindexk/ac/withenable.ac \ diff --git a/Build/source/configure b/Build/source/configure index 8ceeab4c4d7..f4f45e7def2 100755 --- a/Build/source/configure +++ b/Build/source/configure @@ -785,6 +785,7 @@ enable_multiplatform enable_cxx_runtime_hack enable_libtool_hack enable_devnag +enable_lacheck enable_m_tx enable_pmx enable_ps2eps @@ -865,7 +866,6 @@ with_system_libgs with_libgs_includes with_libgs_libdir enable_gsftopk -enable_lacheck enable_lcdf_typetools enable_cfftot1 enable_mmafm @@ -1600,6 +1600,7 @@ Optional Features: --enable-cxx-runtime-hack link C++ runtime statically --enable-libtool-hack ignore libtool dependency_libs --disable-devnag do not build the devnag package + --disable-lacheck do not build the lacheck package --disable-m-tx do not build the m-tx package --disable-pmx do not build the pmx package --disable-ps2eps do not build the ps2eps package @@ -1673,7 +1674,6 @@ Optional Features: --disable-dvipsk do not build the dvipsk package --disable-dvisvgm do not build the dvisvgm package --disable-gsftopk do not build the gsftopk package - --disable-lacheck do not build the lacheck package --disable-lcdf-typetools do not build the lcdf-typetools package --disable-cfftot1 do not build the cfftot1 program @@ -4151,6 +4151,24 @@ $as_echo "$as_me: Assuming \`--enable-devnag=$enable_devnag'" >&6;} ;; esac +## utils/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/lacheck/ +## configure options and TL libraries required for lacheck +# Check whether --enable-lacheck was given. +if test "${enable_lacheck+set}" = set; then : + enableval=$enable_lacheck; +fi +case $enable_lacheck in #( + yes|no) : + ;; #( + *) : + + enable_lacheck=$enable_all_pkgs + { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 +$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} + ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" + ;; +esac + ## utils/m-tx/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/m-tx/ ## configure options and TL libraries required for mtx # Check whether --enable-m-tx was given. @@ -5175,24 +5193,6 @@ test "x$enable_gsftopk" = xno || { need_kpathsea=yes } -## texk/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lacheck/ -## configure options and TL libraries required for lacheck -# Check whether --enable-lacheck was given. -if test "${enable_lacheck+set}" = set; then : - enableval=$enable_lacheck; -fi -case $enable_lacheck in #( - yes|no) : - ;; #( - *) : - - enable_lacheck=$enable_all_pkgs - { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 -$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} - ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" - ;; -esac - ## texk/lcdf-typetools/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lcdf-typetools/ ## configure options and TL libraries required for lcdf-typetools # Check whether --enable-lcdf-typetools was given. diff --git a/Build/source/doc/Makefile.in b/Build/source/doc/Makefile.in index e728e090f94..a004fc71bf4 100644 --- a/Build/source/doc/Makefile.in +++ b/Build/source/doc/Makefile.in @@ -115,6 +115,7 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \ $(top_srcdir)/version.ac \ $(top_srcdir)/utils/devnag/ac/withenable.ac \ + $(top_srcdir)/utils/lacheck/ac/withenable.ac \ $(top_srcdir)/utils/m-tx/ac/withenable.ac \ $(top_srcdir)/utils/pmx/ac/withenable.ac \ $(top_srcdir)/utils/ps2eps/ac/withenable.ac \ @@ -148,7 +149,6 @@ am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ $(top_srcdir)/texk/dvisvgm/ac/dvisvgm.ac \ $(top_srcdir)/texk/dvisvgm/ac/libgs.ac \ $(top_srcdir)/texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/texk/lacheck/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/texk/makeindexk/ac/withenable.ac \ diff --git a/Build/source/libs/Makefile.in b/Build/source/libs/Makefile.in index 79aae9197a2..e177d861ada 100644 --- a/Build/source/libs/Makefile.in +++ b/Build/source/libs/Makefile.in @@ -122,6 +122,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../m4/kpse-zziplib-flags.m4 \ $(top_srcdir)/../version.ac \ $(top_srcdir)/../utils/devnag/ac/withenable.ac \ + $(top_srcdir)/../utils/lacheck/ac/withenable.ac \ $(top_srcdir)/../utils/m-tx/ac/withenable.ac \ $(top_srcdir)/../utils/pmx/ac/withenable.ac \ $(top_srcdir)/../utils/ps2eps/ac/withenable.ac \ @@ -155,7 +156,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../texk/dvisvgm/ac/dvisvgm.ac \ $(top_srcdir)/../texk/dvisvgm/ac/libgs.ac \ $(top_srcdir)/../texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/../texk/lacheck/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/../texk/makeindexk/ac/withenable.ac \ diff --git a/Build/source/libs/configure b/Build/source/libs/configure index 7c810c464d7..0e97556df1c 100755 --- a/Build/source/libs/configure +++ b/Build/source/libs/configure @@ -697,6 +697,7 @@ enable_multiplatform enable_cxx_runtime_hack enable_libtool_hack enable_devnag +enable_lacheck enable_m_tx enable_pmx enable_ps2eps @@ -777,7 +778,6 @@ with_system_libgs with_libgs_includes with_libgs_libdir enable_gsftopk -enable_lacheck enable_lcdf_typetools enable_cfftot1 enable_mmafm @@ -1507,6 +1507,7 @@ Optional Features: --enable-cxx-runtime-hack link C++ runtime statically --enable-libtool-hack ignore libtool dependency_libs --disable-devnag do not build the devnag package + --disable-lacheck do not build the lacheck package --disable-m-tx do not build the m-tx package --disable-pmx do not build the pmx package --disable-ps2eps do not build the ps2eps package @@ -1580,7 +1581,6 @@ Optional Features: --disable-dvipsk do not build the dvipsk package --disable-dvisvgm do not build the dvisvgm package --disable-gsftopk do not build the gsftopk package - --disable-lacheck do not build the lacheck package --disable-lcdf-typetools do not build the lcdf-typetools package --disable-cfftot1 do not build the cfftot1 program @@ -3399,6 +3399,24 @@ $as_echo "$as_me: Assuming \`--enable-devnag=$enable_devnag'" >&6;} ;; esac +## utils/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/lacheck/ +## configure options and TL libraries required for lacheck +# Check whether --enable-lacheck was given. +if test "${enable_lacheck+set}" = set; then : + enableval=$enable_lacheck; +fi +case $enable_lacheck in #( + yes|no) : + ;; #( + *) : + + enable_lacheck=$enable_all_pkgs + { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 +$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} + ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" + ;; +esac + ## utils/m-tx/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/m-tx/ ## configure options and TL libraries required for mtx # Check whether --enable-m-tx was given. @@ -4423,24 +4441,6 @@ test "x$enable_gsftopk" = xno || { need_kpathsea=yes } -## texk/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lacheck/ -## configure options and TL libraries required for lacheck -# Check whether --enable-lacheck was given. -if test "${enable_lacheck+set}" = set; then : - enableval=$enable_lacheck; -fi -case $enable_lacheck in #( - yes|no) : - ;; #( - *) : - - enable_lacheck=$enable_all_pkgs - { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 -$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} - ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" - ;; -esac - ## texk/lcdf-typetools/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lcdf-typetools/ ## configure options and TL libraries required for lcdf-typetools # Check whether --enable-lcdf-typetools was given. diff --git a/Build/source/m4/ChangeLog b/Build/source/m4/ChangeLog index b3399af03c3..dac6ec2b3b6 100644 --- a/Build/source/m4/ChangeLog +++ b/Build/source/m4/ChangeLog @@ -1,3 +1,8 @@ +2014-12-24 Peter Breitenlohner + + * kpse-pkgs.m4 (kpse_texk_pkgs): Move lacheck from here ... + (kpse_utils_pkgs): ... to here. + 2014-12-23 Peter Breitenlohner * kpse-pkgs.m4 (kpse_texk_pkgs): Move devnag from here ... diff --git a/Build/source/m4/kpse-pkgs.m4 b/Build/source/m4/kpse-pkgs.m4 index 7025d913ede..83a7c873703 100644 --- a/Build/source/m4/kpse-pkgs.m4 +++ b/Build/source/m4/kpse-pkgs.m4 @@ -81,6 +81,7 @@ AC_REQUIRE([KPSE_HARFBUZZ_SYSTEM_FLAGS])[]dnl AC_DEFUN([KPSE_UTILS_PKGS], [dnl m4_define([kpse_utils_pkgs], [dnl devnag +lacheck m-tx pmx ps2eps @@ -114,7 +115,6 @@ dvipos dvipsk dvisvgm gsftopk -lacheck lcdf-typetools makeindexk makejvf diff --git a/Build/source/texk/Makefile.in b/Build/source/texk/Makefile.in index e3ae7142b8a..ed78f93b2c0 100644 --- a/Build/source/texk/Makefile.in +++ b/Build/source/texk/Makefile.in @@ -122,6 +122,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../m4/kpse-zziplib-flags.m4 \ $(top_srcdir)/../version.ac \ $(top_srcdir)/../utils/devnag/ac/withenable.ac \ + $(top_srcdir)/../utils/lacheck/ac/withenable.ac \ $(top_srcdir)/../utils/m-tx/ac/withenable.ac \ $(top_srcdir)/../utils/pmx/ac/withenable.ac \ $(top_srcdir)/../utils/ps2eps/ac/withenable.ac \ @@ -155,7 +156,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../texk/dvisvgm/ac/dvisvgm.ac \ $(top_srcdir)/../texk/dvisvgm/ac/libgs.ac \ $(top_srcdir)/../texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/../texk/lacheck/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/../texk/makeindexk/ac/withenable.ac \ diff --git a/Build/source/texk/README b/Build/source/texk/README index f09afb2f0e0..099e64da512 100644 --- a/Build/source/texk/README +++ b/Build/source/texk/README @@ -66,9 +66,6 @@ gsftopk - from Paul Vojta's xdvi? kpathsea - maintained here, by us -lacheck - checked 25apr11 - http://mirror.ctan.org/support/lacheck/lacheck-1.26.tar.gz - lcdf-typetools 2.104 - checked 8jul14 http://www.lcdf.org/type/ diff --git a/Build/source/texk/configure b/Build/source/texk/configure index 5afa49d931f..bdff42516a7 100755 --- a/Build/source/texk/configure +++ b/Build/source/texk/configure @@ -697,6 +697,7 @@ enable_multiplatform enable_cxx_runtime_hack enable_libtool_hack enable_devnag +enable_lacheck enable_m_tx enable_pmx enable_ps2eps @@ -777,7 +778,6 @@ with_system_libgs with_libgs_includes with_libgs_libdir enable_gsftopk -enable_lacheck enable_lcdf_typetools enable_cfftot1 enable_mmafm @@ -877,7 +877,6 @@ dvipos dvipsk dvisvgm gsftopk -lacheck lcdf-typetools makeindexk makejvf @@ -1517,6 +1516,7 @@ Optional Features: --enable-cxx-runtime-hack link C++ runtime statically --enable-libtool-hack ignore libtool dependency_libs --disable-devnag do not build the devnag package + --disable-lacheck do not build the lacheck package --disable-m-tx do not build the m-tx package --disable-pmx do not build the pmx package --disable-ps2eps do not build the ps2eps package @@ -1590,7 +1590,6 @@ Optional Features: --disable-dvipsk do not build the dvipsk package --disable-dvisvgm do not build the dvisvgm package --disable-gsftopk do not build the gsftopk package - --disable-lacheck do not build the lacheck package --disable-lcdf-typetools do not build the lcdf-typetools package --disable-cfftot1 do not build the cfftot1 program @@ -3409,6 +3408,24 @@ $as_echo "$as_me: Assuming \`--enable-devnag=$enable_devnag'" >&6;} ;; esac +## utils/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/lacheck/ +## configure options and TL libraries required for lacheck +# Check whether --enable-lacheck was given. +if test "${enable_lacheck+set}" = set; then : + enableval=$enable_lacheck; +fi +case $enable_lacheck in #( + yes|no) : + ;; #( + *) : + + enable_lacheck=$enable_all_pkgs + { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 +$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} + ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" + ;; +esac + ## utils/m-tx/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/m-tx/ ## configure options and TL libraries required for mtx # Check whether --enable-m-tx was given. @@ -4433,24 +4450,6 @@ test "x$enable_gsftopk" = xno || { need_kpathsea=yes } -## texk/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lacheck/ -## configure options and TL libraries required for lacheck -# Check whether --enable-lacheck was given. -if test "${enable_lacheck+set}" = set; then : - enableval=$enable_lacheck; -fi -case $enable_lacheck in #( - yes|no) : - ;; #( - *) : - - enable_lacheck=$enable_all_pkgs - { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 -$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} - ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" - ;; -esac - ## texk/lcdf-typetools/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lcdf-typetools/ ## configure options and TL libraries required for lcdf-typetools # Check whether --enable-lcdf-typetools was given. @@ -6501,14 +6500,6 @@ if test -x $srcdir/gsftopk/configure; then fi fi -if test -x $srcdir/lacheck/configure; then - test "x$enable_lacheck" = xyes && MAKE_SUBDIRS="$MAKE_SUBDIRS lacheck" - CONF_SUBDIRS="$CONF_SUBDIRS lacheck" - if false; then - subdirs="$subdirs lacheck" - - fi -fi if test -x $srcdir/lcdf-typetools/configure; then test "x$enable_lcdf_typetools" = xyes && MAKE_SUBDIRS="$MAKE_SUBDIRS lcdf-typetools" CONF_SUBDIRS="$CONF_SUBDIRS lcdf-typetools" diff --git a/Build/source/texk/lacheck/ChangeLog b/Build/source/texk/lacheck/ChangeLog deleted file mode 100644 index 4f2a81c4339..00000000000 --- a/Build/source/texk/lacheck/ChangeLog +++ /dev/null @@ -1,76 +0,0 @@ -2014-06-16 Peter Breitenlohner - - * Makefile.am: Drop the obsolete ACLOCAL_AMFLAGS. - -2013-01-29 Peter Breitenlohner - - * Makefile.am, configure.ac: Allow subdir-objects. - -2012-12-17 Peter Breitenlohner - - * Makefile.am: Enable silent rules. - -2010-12-10 Peter Breitenlohner - - * Import original lacheck-1.26, patches in lacheck-1.26-PATCHES. - * Makefile.am, configure.ac, lacheck.test: Adapted. - -2010-02-20 Peter Breitenlohner - - * lacheck.l: Do not #include for MinGW32. - -2009-08-25 Peter Breitenlohner - - Avoid maximal compiler warnings. - * lacheck.l (push): Change param1 from 'unsigned char *' to - 'const char *'. - (struct tex_group): Change member s_name from 'unsigned char *' - to 'char *' and drop or adjust casts accordingly. - -2009-06-16 Peter Breitenlohner - - * Makefile.am: lacheck.l provides yywrap, no need for $(LEXLIB). - -2009-06-12 Peter Breitenlohner - - * Makefile.am (AM_CFLAGS): enable compiler warnings. - * configure.ac: use AC_PROG_LEX instead of KPSE_PROG_LEX - because 'flex -l' produces bad code (at least with flex-2.5.35). - - * lacheck.l: use ANSI C prototypes for all functions. - declare yywrap as static. - (g_checkend): add explict braces to avoid ambiguous `else'. - -2009-04-20 Peter Breitenlohner - - Adapt to TL2009 build system. - -2008-02-29 Peter Breitenlohner - - * configure.in: added AC_CONFIG_HEADERS (moved - from ../kpathsea/common.ac to here). - -2008-02-22 Peter Breitenlohner - - * configure.in: remove AC_DECL_YYTEXT to avoid autoconf warning. - -2008-01-30 Peter Breitenlohner - - Convert from autoconf-2.13 to autoconf-2.59+: - * Makefile.in: Add @configure_input@ line. - * aclocal.m4 (new): Generated (aclocal -I ../m4). - * configure: Regenerated (autoconf). - -Sun Mar 8 20:43:31 1998 Sebastian Rahtz - - * lacheck.lex: to version 1.26 from master source - -Tue Jan 27 14:32:25 1998 Sebastian Rahtz - - * configure etc: new configure.in, c-auto.in, Makefile.in from - Olaf Weber - -Tue Jan 27 13:57:52 1998 Sebastian Rahtz - - * Makefile.in: depend inclusion - diff --git a/Build/source/texk/lacheck/Makefile.am b/Build/source/texk/lacheck/Makefile.am deleted file mode 100644 index 8adc0ee6c44..00000000000 --- a/Build/source/texk/lacheck/Makefile.am +++ /dev/null @@ -1,35 +0,0 @@ -## Makefile.am for the TeX Live subdirectory texk/lacheck/ -## -## Copyright (C) 2009-2014 Peter Breitenlohner -## You may freely use, modify and/or distribute this file. -## -## We want to re-distribute the whole original lacheck source tree. -EXTRA_DIST = $(LACHECK_TREE) -## Patches applied to the original source tree -EXTRA_DIST += $(LACHECK_TREE)-PATCHES - -# in case of an SVN repository -dist-hook: - rm -rf `find $(distdir) -name .svn -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)'` - -AM_CFLAGS = $(WARNING_CFLAGS) - -bin_PROGRAMS = lacheck - -lacheck_SOURCES = @LACHECK_TREE@/lacheck.l - -nodist_man1_MANS = lacheck.1 - -lacheck.1: $(LACHECK_TREE)/lacheck.man - $(AM_V_GEN)sed -e "s!%%LACHECKREV%%!Release $(REV)!" \ - -e "s!%%LACHECKPATH%%!lacheck!" $< > $@ - -CLEANFILES = lacheck.1 - -dist_check_SCRIPTS = lacheck.test - -TESTS = lacheck.test -TESTS_ENVIRONMENT = LACHECK_TREE=$(LACHECK_TREE) - -CLEANFILES += test.out - diff --git a/Build/source/texk/lacheck/Makefile.in b/Build/source/texk/lacheck/Makefile.in deleted file mode 100644 index 38bdc5e4c6f..00000000000 --- a/Build/source/texk/lacheck/Makefile.in +++ /dev/null @@ -1,1286 +0,0 @@ -# Makefile.in generated by automake 1.14.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2013 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -bin_PROGRAMS = lacheck$(EXEEXT) -subdir = . -DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ - $(top_srcdir)/configure $(am__configure_deps) \ - $(srcdir)/config.h.in @LACHECK_TREE@/lacheck.c \ - $(dist_check_SCRIPTS) $(top_srcdir)/../../build-aux/depcomp \ - $(top_srcdir)/../../build-aux/ylwrap \ - $(top_srcdir)/../../build-aux/test-driver ChangeLog \ - ../../build-aux/compile ../../build-aux/config.guess \ - ../../build-aux/config.sub ../../build-aux/depcomp \ - ../../build-aux/install-sh ../../build-aux/missing \ - ../../build-aux/texinfo.tex ../../build-aux/ylwrap \ - ../../build-aux/ltmain.sh \ - $(top_srcdir)/../../build-aux/compile \ - $(top_srcdir)/../../build-aux/config.guess \ - $(top_srcdir)/../../build-aux/config.sub \ - $(top_srcdir)/../../build-aux/install-sh \ - $(top_srcdir)/../../build-aux/ltmain.sh \ - $(top_srcdir)/../../build-aux/missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \ - $(top_srcdir)/../../m4/kpse-warnings.m4 \ - $(top_srcdir)/../../m4/libtool.m4 \ - $(top_srcdir)/../../m4/ltoptions.m4 \ - $(top_srcdir)/../../m4/ltsugar.m4 \ - $(top_srcdir)/../../m4/ltversion.m4 \ - $(top_srcdir)/../../m4/lt~obsolete.m4 \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" -PROGRAMS = $(bin_PROGRAMS) -am__dirstamp = $(am__leading_dot)dirstamp -am_lacheck_OBJECTS = @LACHECK_TREE@/lacheck.$(OBJEXT) -lacheck_OBJECTS = $(am_lacheck_OBJECTS) -lacheck_LDADD = $(LDADD) -AM_V_lt = $(am__v_lt_@AM_V@) -am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) -am__v_lt_0 = --silent -am__v_lt_1 = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -DEFAULT_INCLUDES = -I.@am__isrc@ -depcomp = $(SHELL) $(top_srcdir)/../../build-aux/depcomp -am__depfiles_maybe = depfiles -am__mv = mv -f -COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ - $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \ - $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ - $(AM_CFLAGS) $(CFLAGS) -AM_V_CC = $(am__v_CC_@AM_V@) -am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) -am__v_CC_0 = @echo " CC " $@; -am__v_CC_1 = -CCLD = $(CC) -LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ - $(AM_LDFLAGS) $(LDFLAGS) -o $@ -AM_V_CCLD = $(am__v_CCLD_@AM_V@) -am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) -am__v_CCLD_0 = @echo " CCLD " $@; -am__v_CCLD_1 = -@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ || -LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS) -LTLEXCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \ - $(LIBTOOLFLAGS) --mode=compile $(LEX) $(AM_LFLAGS) $(LFLAGS) -AM_V_LEX = $(am__v_LEX_@AM_V@) -am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@) -am__v_LEX_0 = @echo " LEX " $@; -am__v_LEX_1 = -YLWRAP = $(top_srcdir)/../../build-aux/ylwrap -SOURCES = $(lacheck_SOURCES) -DIST_SOURCES = $(lacheck_SOURCES) -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__uninstall_files_from_dir = { \ - test -z "$$files" \ - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ - $(am__cd) "$$dir" && rm -f $$files; }; \ - } -man1dir = $(mandir)/man1 -NROFF = nroff -MANS = $(nodist_man1_MANS) -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ - $(LISP)config.h.in -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -AM_RECURSIVE_TARGETS = cscope check recheck -am__tty_colors_dummy = \ - mgn= red= grn= lgn= blu= brg= std=; \ - am__color_tests=no -am__tty_colors = { \ - $(am__tty_colors_dummy); \ - if test "X$(AM_COLOR_TESTS)" = Xno; then \ - am__color_tests=no; \ - elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ - am__color_tests=yes; \ - elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ - am__color_tests=yes; \ - fi; \ - if test $$am__color_tests = yes; then \ - red=''; \ - grn=''; \ - lgn=''; \ - blu=''; \ - mgn=''; \ - brg=''; \ - std=''; \ - fi; \ -} -am__recheck_rx = ^[ ]*:recheck:[ ]* -am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* -am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* -# A command that, given a newline-separated list of test names on the -# standard input, print the name of the tests that are to be re-run -# upon "make recheck". -am__list_recheck_tests = $(AWK) '{ \ - recheck = 1; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - { \ - if ((getline line2 < ($$0 ".log")) < 0) \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ - { \ - recheck = 0; \ - break; \ - } \ - else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ - { \ - break; \ - } \ - }; \ - if (recheck) \ - print $$0; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# A command that, given a newline-separated list of test names on the -# standard input, create the global log from their .trs and .log files. -am__create_global_log = $(AWK) ' \ -function fatal(msg) \ -{ \ - print "fatal: making $@: " msg | "cat >&2"; \ - exit 1; \ -} \ -function rst_section(header) \ -{ \ - print header; \ - len = length(header); \ - for (i = 1; i <= len; i = i + 1) \ - printf "="; \ - printf "\n\n"; \ -} \ -{ \ - copy_in_global_log = 1; \ - global_test_result = "RUN"; \ - while ((rc = (getline line < ($$0 ".trs"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".trs"); \ - if (line ~ /$(am__global_test_result_rx)/) \ - { \ - sub("$(am__global_test_result_rx)", "", line); \ - sub("[ ]*$$", "", line); \ - global_test_result = line; \ - } \ - else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ - copy_in_global_log = 0; \ - }; \ - if (copy_in_global_log) \ - { \ - rst_section(global_test_result ": " $$0); \ - while ((rc = (getline line < ($$0 ".log"))) != 0) \ - { \ - if (rc < 0) \ - fatal("failed to read from " $$0 ".log"); \ - print line; \ - }; \ - printf "\n"; \ - }; \ - close ($$0 ".trs"); \ - close ($$0 ".log"); \ -}' -# Restructured Text title. -am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } -# Solaris 10 'make', and several other traditional 'make' implementations, -# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it -# by disabling -e (using the XSI extension "set +e") if it's set. -am__sh_e_setup = case $$- in *e*) set +e;; esac -# Default flags passed to test drivers. -am__common_driver_flags = \ - --color-tests "$$am__color_tests" \ - --enable-hard-errors "$$am__enable_hard_errors" \ - --expect-failure "$$am__expect_failure" -# To be inserted before the command running the test. Creates the -# directory for the log if needed. Stores in $dir the directory -# containing $f, in $tst the test, in $log the log. Executes the -# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and -# passes TESTS_ENVIRONMENT. Set up options for the wrapper that -# will run the test scripts (or their associated LOG_COMPILER, if -# thy have one). -am__check_pre = \ -$(am__sh_e_setup); \ -$(am__vpath_adj_setup) $(am__vpath_adj) \ -$(am__tty_colors); \ -srcdir=$(srcdir); export srcdir; \ -case "$@" in \ - */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ - *) am__odir=.;; \ -esac; \ -test "x$$am__odir" = x"." || test -d "$$am__odir" \ - || $(MKDIR_P) "$$am__odir" || exit $$?; \ -if test -f "./$$f"; then dir=./; \ -elif test -f "$$f"; then dir=; \ -else dir="$(srcdir)/"; fi; \ -tst=$$dir$$f; log='$@'; \ -if test -n '$(DISABLE_HARD_ERRORS)'; then \ - am__enable_hard_errors=no; \ -else \ - am__enable_hard_errors=yes; \ -fi; \ -case " $(XFAIL_TESTS) " in \ - *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ - am__expect_failure=yes;; \ - *) \ - am__expect_failure=no;; \ -esac; \ -$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) -# A shell command to get the names of the tests scripts with any registered -# extension removed (i.e., equivalently, the names of the test logs, with -# the '.log' extension removed). The result is saved in the shell variable -# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, -# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", -# since that might cause problem with VPATH rewrites for suffix-less tests. -# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. -am__set_TESTS_bases = \ - bases='$(TEST_LOGS)'; \ - bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ - bases=`echo $$bases` -RECHECK_LOGS = $(TEST_LOGS) -TEST_SUITE_LOG = test-suite.log -TEST_EXTENSIONS = @EXEEXT@ .test -am__test_logs1 = $(TESTS:=.log) -am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) -TEST_LOGS = $(am__test_logs2:.test.log=.log) -TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../../build-aux/test-driver -TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ - $(TEST_LOG_FLAGS) -am__set_b = \ - case '$@' in \ - */*) \ - case '$*' in \ - */*) b='$*';; \ - *) b=`echo '$@' | sed 's/\.log$$//'`; \ - esac;; \ - *) \ - b='$*';; \ - esac -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -DIST_ARCHIVES = $(distdir).tar.gz -GZIP_ENV = --best -DIST_TARGETS = dist-gzip -distuninstallcheck_listfiles = find . -type f -print -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LACHECK_TREE = @LACHECK_TREE@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LEX = @LEX@ -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -RANLIB = @RANLIB@ -REV = @REV@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -WARNING_CFLAGS = @WARNING_CFLAGS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -EXTRA_DIST = $(LACHECK_TREE) $(LACHECK_TREE)-PATCHES -AM_CFLAGS = $(WARNING_CFLAGS) -lacheck_SOURCES = @LACHECK_TREE@/lacheck.l -nodist_man1_MANS = lacheck.1 -CLEANFILES = lacheck.1 test.out -dist_check_SCRIPTS = lacheck.test -TESTS = lacheck.test -TESTS_ENVIRONMENT = LACHECK_TREE=$(LACHECK_TREE) -all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-am - -.SUFFIXES: -.SUFFIXES: .c .l .lo .log .o .obj .test .test$(EXEEXT) .trs -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -config.h: stamp-h1 - @test -f $@ || rm -f stamp-h1 - @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 - -stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status - @rm -f stamp-h1 - cd $(top_builddir) && $(SHELL) ./config.status config.h -$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) - rm -f stamp-h1 - touch $@ - -distclean-hdr: - -rm -f config.h stamp-h1 -install-binPROGRAMS: $(bin_PROGRAMS) - @$(NORMAL_INSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - if test -n "$$list"; then \ - echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ - fi; \ - for p in $$list; do echo "$$p $$p"; done | \ - sed 's/$(EXEEXT)$$//' | \ - while read p p1; do if test -f $$p \ - || test -f $$p1 \ - ; then echo "$$p"; echo "$$p"; else :; fi; \ - done | \ - sed -e 'p;s,.*/,,;n;h' \ - -e 's|.*|.|' \ - -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ - sed 'N;N;N;s,\n, ,g' | \ - $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ - { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ - if ($$2 == $$4) files[d] = files[d] " " $$1; \ - else { print "f", $$3 "/" $$4, $$1; } } \ - END { for (d in files) print "f", d, files[d] }' | \ - while read type dir files; do \ - if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ - test -z "$$files" || { \ - echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ - $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ - } \ - ; done - -uninstall-binPROGRAMS: - @$(NORMAL_UNINSTALL) - @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ - files=`for p in $$list; do echo "$$p"; done | \ - sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ - -e 's/$$/$(EXEEXT)/' \ - `; \ - test -n "$$list" || exit 0; \ - echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(bindir)" && rm -f $$files - -clean-binPROGRAMS: - @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \ - echo " rm -f" $$list; \ - rm -f $$list || exit $$?; \ - test -n "$(EXEEXT)" || exit 0; \ - list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ - echo " rm -f" $$list; \ - rm -f $$list -@LACHECK_TREE@/$(am__dirstamp): - @$(MKDIR_P) @LACHECK_TREE@ - @: > @LACHECK_TREE@/$(am__dirstamp) -@LACHECK_TREE@/$(DEPDIR)/$(am__dirstamp): - @$(MKDIR_P) @LACHECK_TREE@/$(DEPDIR) - @: > @LACHECK_TREE@/$(DEPDIR)/$(am__dirstamp) -@LACHECK_TREE@/lacheck.$(OBJEXT): @LACHECK_TREE@/$(am__dirstamp) \ - @LACHECK_TREE@/$(DEPDIR)/$(am__dirstamp) - -lacheck$(EXEEXT): $(lacheck_OBJECTS) $(lacheck_DEPENDENCIES) $(EXTRA_lacheck_DEPENDENCIES) - @rm -f lacheck$(EXEEXT) - $(AM_V_CCLD)$(LINK) $(lacheck_OBJECTS) $(lacheck_LDADD) $(LIBS) - -mostlyclean-compile: - -rm -f *.$(OBJEXT) - -rm -f @LACHECK_TREE@/*.$(OBJEXT) - -distclean-compile: - -rm -f *.tab.c - -@AMDEP_TRUE@@am__include@ @am__quote@@LACHECK_TREE@/$(DEPDIR)/lacheck.Po@am__quote@ - -.c.o: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< - -.c.obj: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ -@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` - -.c.lo: -@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\ -@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ -@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo -@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ -@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ -@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $< - -.l.c: - $(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE) - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt -install-man1: $(nodist_man1_MANS) - @$(NORMAL_INSTALL) - @list1='$(nodist_man1_MANS)'; \ - list2=''; \ - test -n "$(man1dir)" \ - && test -n "`echo $$list1$$list2`" \ - || exit 0; \ - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ - { for i in $$list1; do echo "$$i"; done; \ - if test -n "$$list2"; then \ - for i in $$list2; do echo "$$i"; done \ - | sed -n '/\.1[a-z]*$$/p'; \ - fi; \ - } | while read p; do \ - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; echo "$$p"; \ - done | \ - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ - sed 'N;N;s,\n, ,g' | { \ - list=; while read file base inst; do \ - if test "$$base" = "$$inst"; then list="$$list $$file"; else \ - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ - fi; \ - done; \ - for i in $$list; do echo "$$i"; done | $(am__base_list) | \ - while read files; do \ - test -z "$$files" || { \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ - done; } - -uninstall-man1: - @$(NORMAL_UNINSTALL) - @list='$(nodist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \ - files=`{ for i in $$list; do echo "$$i"; done; \ - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-am -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-am - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-am - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -# Recover from deleted '.trs' file; this should ensure that -# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create -# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells -# to avoid problems with "make -n". -.log.trs: - rm -f $< $@ - $(MAKE) $(AM_MAKEFLAGS) $< - -# Leading 'am--fnord' is there to ensure the list of targets does not -# expand to empty, as could happen e.g. with make check TESTS=''. -am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) -am--force-recheck: - @: - -$(TEST_SUITE_LOG): $(TEST_LOGS) - @$(am__set_TESTS_bases); \ - am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ - redo_bases=`for i in $$bases; do \ - am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ - done`; \ - if test -n "$$redo_bases"; then \ - redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ - redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ - if $(am__make_dryrun); then :; else \ - rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ - fi; \ - fi; \ - if test -n "$$am__remaking_logs"; then \ - echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ - "recursion detected" >&2; \ - else \ - am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ - fi; \ - if $(am__make_dryrun); then :; else \ - st=0; \ - errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ - for i in $$redo_bases; do \ - test -f $$i.trs && test -r $$i.trs \ - || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ - test -f $$i.log && test -r $$i.log \ - || { echo "$$errmsg $$i.log" >&2; st=1; }; \ - done; \ - test $$st -eq 0 || exit 1; \ - fi - @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ - ws='[ ]'; \ - results=`for b in $$bases; do echo $$b.trs; done`; \ - test -n "$$results" || results=/dev/null; \ - all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ - pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ - fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ - skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ - xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ - xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ - error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ - if test `expr $$fail + $$xpass + $$error` -eq 0; then \ - success=true; \ - else \ - success=false; \ - fi; \ - br='==================='; br=$$br$$br$$br$$br; \ - result_count () \ - { \ - if test x"$$1" = x"--maybe-color"; then \ - maybe_colorize=yes; \ - elif test x"$$1" = x"--no-color"; then \ - maybe_colorize=no; \ - else \ - echo "$@: invalid 'result_count' usage" >&2; exit 4; \ - fi; \ - shift; \ - desc=$$1 count=$$2; \ - if test $$maybe_colorize = yes && test $$count -gt 0; then \ - color_start=$$3 color_end=$$std; \ - else \ - color_start= color_end=; \ - fi; \ - echo "$${color_start}# $$desc $$count$${color_end}"; \ - }; \ - create_testsuite_report () \ - { \ - result_count $$1 "TOTAL:" $$all "$$brg"; \ - result_count $$1 "PASS: " $$pass "$$grn"; \ - result_count $$1 "SKIP: " $$skip "$$blu"; \ - result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ - result_count $$1 "FAIL: " $$fail "$$red"; \ - result_count $$1 "XPASS:" $$xpass "$$red"; \ - result_count $$1 "ERROR:" $$error "$$mgn"; \ - }; \ - { \ - echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ - $(am__rst_title); \ - create_testsuite_report --no-color; \ - echo; \ - echo ".. contents:: :depth: 2"; \ - echo; \ - for b in $$bases; do echo $$b; done \ - | $(am__create_global_log); \ - } >$(TEST_SUITE_LOG).tmp || exit 1; \ - mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ - if $$success; then \ - col="$$grn"; \ - else \ - col="$$red"; \ - test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ - fi; \ - echo "$${col}$$br$${std}"; \ - echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ - echo "$${col}$$br$${std}"; \ - create_testsuite_report --maybe-color; \ - echo "$$col$$br$$std"; \ - if $$success; then :; else \ - echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ - if test -n "$(PACKAGE_BUGREPORT)"; then \ - echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ - fi; \ - echo "$$col$$br$$std"; \ - fi; \ - $$success || exit 1 - -check-TESTS: - @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list - @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - trs_list=`for i in $$bases; do echo $$i.trs; done`; \ - log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ - exit $$?; -recheck: all $(dist_check_SCRIPTS) - @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - @set +e; $(am__set_TESTS_bases); \ - bases=`for i in $$bases; do echo $$i; done \ - | $(am__list_recheck_tests)` || exit 1; \ - log_list=`for i in $$bases; do echo $$i.log; done`; \ - log_list=`echo $$log_list`; \ - $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ - am__force_recheck=am--force-recheck \ - TEST_LOGS="$$log_list"; \ - exit $$? -.test.log: - @p='$<'; \ - $(am__set_b); \ - $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ - --log-file $$b.log --trs-file $$b.trs \ - $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ - "$$tst" $(AM_TESTS_FD_REDIRECT) -@am__EXEEXT_TRUE@.test$(EXEEXT).log: -@am__EXEEXT_TRUE@ @p='$<'; \ -@am__EXEEXT_TRUE@ $(am__set_b); \ -@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ -@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ -@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ -@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) - -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build \ - && ../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS) - $(MAKE) $(AM_MAKEFLAGS) check-TESTS -check: check-am -all-am: Makefile $(PROGRAMS) $(MANS) config.h -installdirs: - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) - -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) - -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) - -clean-generic: - -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -rm -f @LACHECK_TREE@/$(DEPDIR)/$(am__dirstamp) - -rm -f @LACHECK_TREE@/$(am__dirstamp) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." - -rm -f @LACHECK_TREE@/lacheck.c -clean: clean-am - -clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf @LACHECK_TREE@/$(DEPDIR) - -rm -f Makefile -distclean-am: clean-am distclean-compile distclean-generic \ - distclean-hdr distclean-libtool distclean-tags - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-man - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: install-binPROGRAMS - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: install-man1 - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -rf @LACHECK_TREE@/$(DEPDIR) - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-compile mostlyclean-generic \ - mostlyclean-libtool - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-binPROGRAMS uninstall-man - -uninstall-man: uninstall-man1 - -.MAKE: all check-am install-am install-strip - -.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-TESTS \ - check-am clean clean-binPROGRAMS clean-cscope clean-generic \ - clean-libtool cscope cscopelist-am ctags ctags-am dist \ - dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip distcheck distclean \ - distclean-compile distclean-generic distclean-hdr \ - distclean-libtool distclean-tags distcleancheck distdir \ - distuninstallcheck dvi dvi-am html html-am info info-am \ - install install-am install-binPROGRAMS install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-man1 install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-compile \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - recheck tags tags-am uninstall uninstall-am \ - uninstall-binPROGRAMS uninstall-man uninstall-man1 - - -# in case of an SVN repository -dist-hook: - rm -rf `find $(distdir) -name .svn -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)'` - -lacheck.1: $(LACHECK_TREE)/lacheck.man - $(AM_V_GEN)sed -e "s!%%LACHECKREV%%!Release $(REV)!" \ - -e "s!%%LACHECKPATH%%!lacheck!" $< > $@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/Build/source/texk/lacheck/ac/withenable.ac b/Build/source/texk/lacheck/ac/withenable.ac deleted file mode 100644 index 7c26975528a..00000000000 --- a/Build/source/texk/lacheck/ac/withenable.ac +++ /dev/null @@ -1,7 +0,0 @@ -## texk/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lacheck/ -dnl -dnl Copyright (C) 2009 Peter Breitenlohner -dnl You may freely use, modify and/or distribute this file. -dnl -## configure options and TL libraries required for lacheck -KPSE_ENABLE_PROG([lacheck]) diff --git a/Build/source/texk/lacheck/aclocal.m4 b/Build/source/texk/lacheck/aclocal.m4 deleted file mode 100644 index 563e3cde7db..00000000000 --- a/Build/source/texk/lacheck/aclocal.m4 +++ /dev/null @@ -1,1192 +0,0 @@ -# generated automatically by aclocal 1.14.1 -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. - -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, -[m4_warning([this file was generated for autoconf 2.69. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically 'autoreconf'.])]) - -# Copyright (C) 2002-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.14' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.14.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.14.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to -# '$srcdir', '$srcdir/..', or '$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is '.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ([2.52])dnl - m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -# _AM_DEPENDENCIES(NAME) -# ---------------------- -# See how the compiler implements dependency checking. -# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". -# We try a few techniques and use that to set a single cache variable. -# -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular -# dependency, and given that the user is not expected to run this macro, -# just rely on AC_PROG_CC. -AC_DEFUN([_AM_DEPENDENCIES], -[AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], - [$1], [CXX], [depcc="$CXX" am_compiler_list=], - [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], - [$1], [UPC], [depcc="$UPC" am_compiler_list=], - [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) - - -# AM_SET_DEPDIR -# ------------- -# Choose a directory name for dependency files. -# This macro is AC_REQUIREd in _AM_DEPENDENCIES. -AC_DEFUN([AM_SET_DEPDIR], -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) - - -# AM_DEP_TRACK -# ------------ -AC_DEFUN([AM_DEP_TRACK], -[AC_ARG_ENABLE([dependency-tracking], [dnl -AS_HELP_STRING( - [--enable-dependency-tracking], - [do not reject slow dependency extractors]) -AS_HELP_STRING( - [--disable-dependency-tracking], - [speeds up one-time build])]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -AC_SUBST([am__nodep])dnl -_AM_SUBST_NOTMAKE([am__nodep])dnl -]) - -# Generate code to set up dependency tracking. -*- Autoconf -*- - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - - -# _AM_OUTPUT_DEPENDENCY_COMMANDS -# ------------------------------ -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], -[{ - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -])# _AM_OUTPUT_DEPENDENCY_COMMANDS - - -# AM_OUTPUT_DEPENDENCY_COMMANDS -# ----------------------------- -# This macro should only be invoked once -- use via AC_REQUIRE. -# -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], -[AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. -m4_define([AC_PROG_CC], -m4_defn([AC_PROG_CC]) -[_AM_PROG_CC_C_O -]) - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.65])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[AC_DIAGNOSE([obsolete], - [$0: two- and three-arguments forms are deprecated.]) -m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if( - m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), - [ok:ok],, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) - AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -AM_MISSING_PROG([AUTOCONF], [autoconf]) -AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -AM_MISSING_PROG([AUTOHEADER], [autoheader]) -AM_MISSING_PROG([MAKEINFO], [makeinfo]) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -AC_SUBST([mkdir_p], ['$(MKDIR_P)']) -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES([CC])], - [m4_define([AC_PROG_CC], - m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES([CXX])], - [m4_define([AC_PROG_CXX], - m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES([OBJC])], - [m4_define([AC_PROG_OBJC], - m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], - [_AM_DEPENDENCIES([OBJCXX])], - [m4_define([AC_PROG_OBJCXX], - m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl -]) -AC_REQUIRE([AM_SILENT_RULES])dnl -dnl The testsuite driver may need to know about EXEEXT, so add the -dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This -dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) - fi -fi]) - -dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further -dnl mangled by Autoconf and run in a shell conditional statement. -m4_define([_AC_COMPILER_EXEEXT], -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST([install_sh])]) - -# Copyright (C) 2003-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAINTAINER_MODE([DEFAULT-MODE]) -# ---------------------------------- -# Control maintainer-specific portions of Makefiles. -# Default is to disable them, unless 'enable' is passed literally. -# For symmetry, 'disable' may be passed as well. Anyway, the user -# can override the default with the --enable/--disable switch. -AC_DEFUN([AM_MAINTAINER_MODE], -[m4_case(m4_default([$1], [disable]), - [enable], [m4_define([am_maintainer_other], [disable])], - [disable], [m4_define([am_maintainer_other], [enable])], - [m4_define([am_maintainer_other], [enable]) - m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) -AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode's default is 'disable' unless 'enable' is passed - AC_ARG_ENABLE([maintainer-mode], - [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], - am_maintainer_other[ make rules and dependencies not useful - (and sometimes confusing) to the casual installer])], - [USE_MAINTAINER_MODE=$enableval], - [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST([MAINT])dnl -] -) - -# Check to see how 'make' treats includes. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MAKE_INCLUDE() -# ----------------- -# Check to see how make treats includes. -AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it is modern enough. -# If it is, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - AC_MSG_WARN(['missing' script is too old or missing]) -fi -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# -------------------- -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) - -# _AM_SET_OPTIONS(OPTIONS) -# ------------------------ -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Copyright (C) 1999-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_CC_C_O -# --------------- -# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC -# to automatically call this. -AC_DEFUN([_AM_PROG_CC_C_O], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([compile])dnl -AC_LANG_PUSH([C])dnl -AC_CACHE_CHECK( - [whether $CC understands -c and -o together], - [am_cv_prog_cc_c_o], - [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i]) -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -AC_LANG_POP([C])]) - -# For backward compatibility. -AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_RUN_LOG(COMMAND) -# ------------------- -# Run COMMAND, save the exit status in ac_status, and log it. -# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) -AC_DEFUN([AM_RUN_LOG], -[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken - alias in your environment]) - fi - if test "$[2]" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT([yes]) -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi -AC_CONFIG_COMMANDS_PRE( - [AC_MSG_CHECKING([that generated files are newer than configure]) - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - AC_MSG_RESULT([done])]) -rm -f conftest.file -]) - -# Copyright (C) 2009-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_SILENT_RULES([DEFAULT]) -# -------------------------- -# Enable less verbose build rules; with the default set to DEFAULT -# ("yes" being less verbose, "no" or empty being verbose). -AC_DEFUN([AM_SILENT_RULES], -[AC_ARG_ENABLE([silent-rules], [dnl -AS_HELP_STRING( - [--enable-silent-rules], - [less verbose build output (undo: "make V=1")]) -AS_HELP_STRING( - [--disable-silent-rules], - [verbose build output (undo: "make V=0")])dnl -]) -case $enable_silent_rules in @%:@ ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -dnl -dnl A few 'make' implementations (e.g., NonStop OS and NextStep) -dnl do not support nested variable expansions. -dnl See automake bug#9928 and bug#10237. -am_make=${MAKE-make} -AC_CACHE_CHECK([whether $am_make supports nested variables], - [am_cv_make_support_nested_variables], - [if AS_ECHO([['TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi]) -if test $am_cv_make_support_nested_variables = yes; then - dnl Using '$V' instead of '$(V)' breaks IRIX make. - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AC_SUBST([AM_V])dnl -AM_SUBST_NOTMAKE([AM_V])dnl -AC_SUBST([AM_DEFAULT_V])dnl -AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) - -# Copyright (C) 2001-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor 'install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in "make install-strip", and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# AM_SUBST_NOTMAKE(VARIABLE) -# -------------------------- -# Public sister of _AM_SUBST_NOTMAKE. -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004-2013 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of 'v7', 'ustar', or 'pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -# -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AC_SUBST([AMTAR], ['$${TAR-tar}']) - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' - -m4_if([$1], [v7], - [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], - - [m4_case([$1], - [ustar], - [# The POSIX 1988 'ustar' format is defined with fixed-size fields. - # There is notably a 21 bits limit for the UID and the GID. In fact, - # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 - # and bug#13588). - am_max_uid=2097151 # 2^21 - 1 - am_max_gid=$am_max_uid - # The $UID and $GID variables are not portable, so we need to resort - # to the POSIX-mandated id(1) utility. Errors in the 'id' calls - # below are definitely unexpected, so allow the users to see them - # (that is, avoid stderr redirection). - am_uid=`id -u || echo unknown` - am_gid=`id -g || echo unknown` - AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) - if test $am_uid -le $am_max_uid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi - AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) - if test $am_gid -le $am_max_gid; then - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - _am_tools=none - fi], - - [pax], - [], - - [m4_fatal([Unknown tar format])]) - - AC_MSG_CHECKING([how to create a $1 tar archive]) - - # Go ahead even if we have the value already cached. We do so because we - # need to set the values for the 'am__tar' and 'am__untar' variables. - _am_tools=${am_cv_prog_tar_$1-$_am_tools} - - for _am_tool in $_am_tools; do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works. - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi - done - rm -rf conftest.dir - - AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) - AC_MSG_RESULT([$am_cv_prog_tar_$1])]) - -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - -m4_include([../../m4/kpse-common.m4]) -m4_include([../../m4/kpse-warnings.m4]) -m4_include([../../m4/libtool.m4]) -m4_include([../../m4/ltoptions.m4]) -m4_include([../../m4/ltsugar.m4]) -m4_include([../../m4/ltversion.m4]) -m4_include([../../m4/lt~obsolete.m4]) diff --git a/Build/source/texk/lacheck/config.h.in b/Build/source/texk/lacheck/config.h.in deleted file mode 100644 index 9e585637988..00000000000 --- a/Build/source/texk/lacheck/config.h.in +++ /dev/null @@ -1,179 +0,0 @@ -/* config.h.in. Generated from configure.ac by autoheader. */ - -/* Define to 1 if the `closedir' function returns void instead of `int'. */ -#undef CLOSEDIR_VOID - -/* Define to 1 if you have the header file. */ -#undef HAVE_ASSERT_H - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_DIRENT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_DLFCN_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_FLOAT_H - -/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */ -#undef HAVE_FSEEKO - -/* Define to 1 if you have the `getcwd' function. */ -#undef HAVE_GETCWD - -/* Define to 1 if you have the `getwd' function. */ -#undef HAVE_GETWD - -/* Define to 1 if you have the header file. */ -#undef HAVE_INTTYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_LIMITS_H - -/* Define to 1 if you have the `memcmp' function. */ -#undef HAVE_MEMCMP - -/* Define to 1 if you have the `memcpy' function. */ -#undef HAVE_MEMCPY - -/* Define to 1 if you have the header file. */ -#undef HAVE_MEMORY_H - -/* Define to 1 if you have the `mkstemp' function. */ -#undef HAVE_MKSTEMP - -/* Define to 1 if you have the `mktemp' function. */ -#undef HAVE_MKTEMP - -/* Define to 1 if you have the header file, and it defines `DIR'. */ -#undef HAVE_NDIR_H - -/* Define to 1 if you have the `putenv' function. */ -#undef HAVE_PUTENV - -/* Define to 1 if you have the header file. */ -#undef HAVE_PWD_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDINT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STDLIB_H - -/* Define to 1 if you have the `strcasecmp' function. */ -#undef HAVE_STRCASECMP - -/* Define to 1 if you have the `strchr' function. */ -#undef HAVE_STRCHR - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRINGS_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_STRING_H - -/* Define to 1 if you have the `strrchr' function. */ -#undef HAVE_STRRCHR - -/* Define to 1 if you have the `strstr' function. */ -#undef HAVE_STRSTR - -/* Define to 1 if you have the `strtol' function. */ -#undef HAVE_STRTOL - -/* Define to 1 if `st_mtim' is a member of `struct stat'. */ -#undef HAVE_STRUCT_STAT_ST_MTIM - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_DIR_H - -/* Define to 1 if you have the header file, and it defines `DIR'. - */ -#undef HAVE_SYS_NDIR_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_PARAM_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_STAT_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_SYS_TYPES_H - -/* Define to 1 if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define to the sub-directory where libtool stores uninstalled libraries. */ -#undef LT_OBJDIR - -/* Name of package */ -#undef PACKAGE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* Define to 1 if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Version number of package */ -#undef VERSION - -/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a - `char[]'. */ -#undef YYTEXT_POINTER - -/* Enable large inode numbers on Mac OS X 10.5. */ -#ifndef _DARWIN_USE_64_BIT_INODE -# define _DARWIN_USE_64_BIT_INODE 1 -#endif - -/* Number of bits in a file offset, on hosts where this is settable. */ -#undef _FILE_OFFSET_BITS - -/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */ -#undef _LARGEFILE_SOURCE - -/* Define for large files, on AIX-style hosts. */ -#undef _LARGE_FILES - -/* Define for Solaris 2.5.1 so the uint64_t typedef from , - , or is not used. If the typedef were allowed, the - #define below would cause a syntax error. */ -#undef _UINT64_T - -/* Define to empty if `const' does not conform to ANSI C. */ -#undef const - -/* Define to `__inline__' or `__inline' if that's what the C compiler - calls it, or to nothing if 'inline' is not supported under any name. */ -#ifndef __cplusplus -#undef inline -#endif - -/* Define to the type of a signed integer type of width exactly 64 bits if - such a type exists and the standard includes do not define it. */ -#undef int64_t - -/* Define to `unsigned int' if does not define. */ -#undef size_t - -/* Define to the type of an unsigned integer type of width exactly 64 bits if - such a type exists and the standard includes do not define it. */ -#undef uint64_t diff --git a/Build/source/texk/lacheck/configure b/Build/source/texk/lacheck/configure deleted file mode 100755 index 81bc1155a37..00000000000 --- a/Build/source/texk/lacheck/configure +++ /dev/null @@ -1,15727 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for LaCheck (TeX Live) 1.26. -# -# Report bugs to . -# -# -# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. -# -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -# Use a proper internal environment variable to ensure we don't fall - # into an infinite loop, continuously re-executing ourselves. - if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then - _as_can_reexec=no; export _as_can_reexec; - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -as_fn_exit 255 - fi - # We don't want this to propagate to other subprocesses. - { _as_can_reexec=; unset _as_can_reexec;} -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1 -test -x / || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in #( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - export CONFIG_SHELL - # We cannot yet assume a decent shell, so we have to provide a -# neutralization value for shells without unset; and this also -# works around shells that cannot unset nonexistent variables. -# Preserve -v and -x to the replacement shell. -BASH_ENV=/dev/null -ENV=/dev/null -(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV -case $- in # (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; -esac -exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} -# Admittedly, this is quite paranoid, since all the known shells bail -# out after a failed `exec'. -$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 -exit 255 -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and tex-k@tug.org -$0: about your system, including any error possibly output -$0: before this message. Then install a modern shell, or -$0: manually run the script under such a shell if you do -$0: have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # If we had to re-execute with $CONFIG_SHELL, we're ensured to have - # already done that, so ensure we don't try to do so again and fall - # in an infinite loop. This has already happened in practice. - _as_can_reexec=no; export _as_can_reexec - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='LaCheck (TeX Live)' -PACKAGE_TARNAME='lacheck--tex-live-' -PACKAGE_VERSION='1.26' -PACKAGE_STRING='LaCheck (TeX Live) 1.26' -PACKAGE_BUGREPORT='tex-k@tug.org' -PACKAGE_URL='' - -ac_unique_file="lacheck-1.26/lacheck.l" -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIBOBJS -LEXLIB -LEX_OUTPUT_ROOT -LEX -CPP -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -OBJDUMP -DLLTOOL -AS -WARNING_CFLAGS -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -am__nodep -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -MAINT -MAINTAINER_MODE_FALSE -MAINTAINER_MODE_TRUE -AM_BACKSLASH -AM_DEFAULT_VERBOSITY -AM_DEFAULT_V -AM_V -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -LACHECK_TREE -REV -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_silent_rules -enable_maintainer_mode -enable_dependency_tracking -enable_compiler_warnings -enable_shared -enable_static -with_pic -enable_fast_install -with_aix_soname -with_gnu_ld -with_sysroot -enable_libtool_lock -enable_largefile -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures LaCheck (TeX Live) 1.26 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root - [DATAROOTDIR/doc/lacheck--tex-live-] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of LaCheck (TeX Live) 1.26:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-silent-rules less verbose build output (undo: "make V=1") - --disable-silent-rules verbose build output (undo: "make V=0") - --enable-maintainer-mode - enable make rules and dependencies not useful (and - sometimes confusing) to the casual installer - --enable-dependency-tracking - do not reject slow dependency extractors - --disable-dependency-tracking - speeds up one-time build - --enable-compiler-warnings=[no|min|yes|max|all] - Turn on compiler warnings [default: yes if - maintainer-mode, min otherwise] - --enable-shared[=PKGS] build shared libraries [default=yes] - --enable-static[=PKGS] build static libraries [default=yes] - --enable-fast-install[=PKGS] - optimize for fast installation [default=yes] - --disable-libtool-lock avoid locking (might break parallel builds) - --disable-largefile omit support for large files - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use - both] - --with-aix-soname=aix|svr4|both - shared library versioning (aka "SONAME") variant to - provide on AIX, [default=aix]. - --with-gnu-ld assume the C compiler uses GNU ld [default=no] - --with-sysroot[=DIR] Search for dependent libraries within DIR (or the - compiler's sysroot if not specified). - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -LaCheck (TeX Live) configure 1.26 -generated by GNU Autoconf 2.69 - -Copyright (C) 2012 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -# ac_fn_c_try_compile LINENO -# -------------------------- -# Try to compile conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_compile - -# ac_fn_c_try_link LINENO -# ----------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - test -x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_link - -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists and can be compiled using the include files in -# INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_compile - -# ac_fn_c_try_cpp LINENO -# ---------------------- -# Try to preprocess conftest.$ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_cpp - -# ac_fn_c_try_run LINENO -# ---------------------- -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes -# that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} # ac_fn_c_try_run - -# ac_fn_c_check_func LINENO FUNC VAR -# ---------------------------------- -# Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_func - -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES -# ------------------------------------------------------- -# Tests whether HEADER exists, giving a warning if it cannot be compiled using -# the include files in INCLUDES and setting the cache variable VAR -# accordingly. -ac_fn_c_check_header_mongrel () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if eval \${$3+:} false; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -else - # Is the header compilable? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 -$as_echo_n "checking $2 usability... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -#include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_header_compiler=yes -else - ac_header_compiler=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 -$as_echo "$ac_header_compiler" >&6; } - -# Is the header present? -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 -$as_echo_n "checking $2 presence... " >&6; } -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include <$2> -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - ac_header_preproc=yes -else - ac_header_preproc=no -fi -rm -f conftest.err conftest.i conftest.$ac_ext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 -$as_echo "$ac_header_preproc" >&6; } - -# So? What about this header? -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( - yes:no: ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} - ;; - no:yes:* ) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 -$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 -$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} -( $as_echo "## ---------------------------- ## -## Report this to tex-k@tug.org ## -## ---------------------------- ##" - ) | sed "s/^/$as_me: WARNING: /" >&2 - ;; -esac - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=\$ac_header_compiler" -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_header_mongrel - -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES -# ------------------------------------------- -# Tests whether TYPE exists after having included INCLUDES, setting cache -# variable VAR accordingly. -ac_fn_c_check_type () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof ($2)) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -int -main () -{ -if (sizeof (($2))) - return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - eval "$3=yes" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_type - -# ac_fn_c_find_intX_t LINENO BITS VAR -# ----------------------------------- -# Finds a signed integer type with width BITS, setting cache variable VAR -# accordingly. -ac_fn_c_find_intX_t () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5 -$as_echo_n "checking for int$2_t... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - # Order is important - never check a type that is potentially smaller - # than half of the expected target width. - for ac_type in int$2_t 'int' 'long int' \ - 'long long int' 'short int' 'signed char'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default - enum { N = $2 / 2 - 1 }; -int -main () -{ -static int test_array [1 - 2 * !(0 < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1))]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default - enum { N = $2 / 2 - 1 }; -int -main () -{ -static int test_array [1 - 2 * !(($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 1) - < ($ac_type) ((((($ac_type) 1 << N) << N) - 1) * 2 + 2))]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - case $ac_type in #( - int$2_t) : - eval "$3=yes" ;; #( - *) : - eval "$3=\$ac_type" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if eval test \"x\$"$3"\" = x"no"; then : - -else - break -fi - done -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_find_intX_t - -# ac_fn_c_find_uintX_t LINENO BITS VAR -# ------------------------------------ -# Finds an unsigned integer type with width BITS, setting cache variable VAR -# accordingly. -ac_fn_c_find_uintX_t () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5 -$as_echo_n "checking for uint$2_t... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - eval "$3=no" - # Order is important - never check a type that is potentially smaller - # than half of the expected target width. - for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \ - 'unsigned long long int' 'unsigned short int' 'unsigned char'; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -int -main () -{ -static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)]; -test_array [0] = 0; -return test_array [0]; - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - case $ac_type in #( - uint$2_t) : - eval "$3=yes" ;; #( - *) : - eval "$3=\$ac_type" ;; -esac -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - if eval test \"x\$"$3"\" = x"no"; then : - -else - break -fi - done -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_find_uintX_t - -# ac_fn_c_check_member LINENO AGGR MEMBER VAR INCLUDES -# ---------------------------------------------------- -# Tries to find if the field MEMBER exists in type AGGR, after including -# INCLUDES, setting cache variable VAR accordingly. -ac_fn_c_check_member () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2.$3" >&5 -$as_echo_n "checking for $2.$3... " >&6; } -if eval \${$4+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main () -{ -static $2 ac_aggr; -if (ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$4=yes" -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$5 -int -main () -{ -static $2 ac_aggr; -if (sizeof ac_aggr.$3) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$4=yes" -else - eval "$4=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$4 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} # ac_fn_c_check_member -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by LaCheck (TeX Live) $as_me 1.26, which was -generated by GNU Autoconf 2.69. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in #(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - - - -ac_aux_dir= -for ac_dir in ../../build-aux "$srcdir"/../../build-aux; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../build-aux \"$srcdir\"/../../build-aux" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - - - -REV='1.26' -REV=1.26 - -LACHECK_TREE=lacheck-1.26 - - -am__api_version='1.14' - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in #(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; -esac - -# Do 'set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - am_has_slept=no - for am_try in 1 2; do - echo "timestamp, slept: $am_has_slept" > conftest.file - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken - alias in your environment" "$LINENO" 5 - fi - if test "$2" = conftest.file || test $am_try -eq 2; then - break - fi - # Just in case. - sleep 1 - am_has_slept=yes - done - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -# If we didn't sleep, we still need to ensure time stamps of config.status and -# generated files are strictly newer. -am_sleep_pid= -if grep 'slept: no' conftest.file >/dev/null 2>&1; then - ( sleep 1 ) & - am_sleep_pid=$! -fi - -rm -f conftest.file - -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --is-lightweight"; then - am_missing_run="$MISSING " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using 'strip' when the user -# run "make install-strip". However 'strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the 'STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -# Check whether --enable-silent-rules was given. -if test "${enable_silent_rules+set}" = set; then : - enableval=$enable_silent_rules; -fi - -case $enable_silent_rules in # ((( - yes) AM_DEFAULT_VERBOSITY=0;; - no) AM_DEFAULT_VERBOSITY=1;; - *) AM_DEFAULT_VERBOSITY=1;; -esac -am_make=${MAKE-make} -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 -$as_echo_n "checking whether $am_make supports nested variables... " >&6; } -if ${am_cv_make_support_nested_variables+:} false; then : - $as_echo_n "(cached) " >&6 -else - if $as_echo 'TRUE=$(BAR$(V)) -BAR0=false -BAR1=true -V=1 -am__doit: - @$(TRUE) -.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then - am_cv_make_support_nested_variables=yes -else - am_cv_make_support_nested_variables=no -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 -$as_echo "$am_cv_make_support_nested_variables" >&6; } -if test $am_cv_make_support_nested_variables = yes; then - AM_V='$(V)' - AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' -else - AM_V=$AM_DEFAULT_VERBOSITY - AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY -fi -AM_BACKSLASH='\' - -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -# Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' - am__nodep='_no' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -struct stat; -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 -$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } -if ${am_cv_prog_cc_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF - # Make sure it works both with $CC and with simple cc. - # Following AC_PROG_CC_C_O, we do the test twice because some - # compilers refuse to overwrite an existing .o file with -o, - # though they will create one. - am_cv_prog_cc_c_o=yes - for am_i in 1 2; do - if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 - ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - (exit $ac_status); } \ - && test -f conftest2.$ac_objext; then - : OK - else - am_cv_prog_cc_c_o=no - break - fi - done - rm -f core conftest* - unset am_i -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 -$as_echo "$am_cv_prog_cc_c_o" >&6; } -if test "$am_cv_prog_cc_c_o" != yes; then - # Losing compiler, so override with the script. - # FIXME: It is wrong to rewrite CC. - # But if we don't then we get into trouble of one sort or another. - # A longer-term fix would be to have automake use am__CC in this case, - # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" - CC="$am_aux_dir/compile $CC" -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named 'D' -- because '-MD' means "put the output - # in D". - rm -rf conftest.dir - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with - # Solaris 10 /bin/sh. - echo '/* dummy */' > sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with '-c' and '-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle '-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs. - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # After this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested. - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvc7 | msvc7msys | msvisualcpp | msvcmsys) - # This compiler won't grok '-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -# Check whether --enable-compiler-warnings was given. -if test "${enable_compiler_warnings+set}" = set; then : - enableval=$enable_compiler_warnings; -fi -case $enable_compiler_warnings in #( - no | min | yes | max | all) : - ;; #( - *) : - if test "x$enable_maintainer_mode" = xyes; then : - enable_compiler_warnings=yes -else - enable_compiler_warnings=min -fi ;; -esac - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4.4' -macro_revision='2.4.4' - - - - - - - - - - - - - -ltmain=$ac_aux_dir/ltmain.sh - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case $ECHO in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_SED" || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_GREP" || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_EGREP" || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_FGREP" || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -# Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test yes = "$GCC"; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return, which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD=$ac_prog - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test yes = "$with_gnu_ld"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD=$ac_dir/$ac_prog - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM=$NM -else - lt_nm_to_check=${ac_tool_prefix}nm - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - tmp_nm=$ac_dir/$lt_tmp_nm - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the 'sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty - case $build_os in - mingw*) lt_bad_file=conftest.nm/nofile ;; - *) lt_bad_file=/dev/null ;; - esac - case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in - *$lt_bad_file* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break 2 - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break 2 - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS=$lt_save_ifs - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test no != "$lt_cv_path_NM"; then - NM=$lt_cv_path_NM -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols -headers" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test : != "$DUMPBIN"; then - NM=$DUMPBIN - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring=ABCD - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - os2*) - # The test takes a long time on OS/2. - lt_cv_sys_max_cmd_len=8192 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len" && \ - test undefined != "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test X`env echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test 17 != "$i" # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n "$lt_cv_sys_max_cmd_len"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test yes != "$GCC"; then - reload_cmds=false - fi - ;; - darwin*) - if test yes = "$GCC"; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# 'unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# that responds to the $file_magic_cmd with a given extended regex. -# If you have 'file' or equivalent on your system and you're not sure -# whether 'pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - if ( file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd* | bitrig*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -os2*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh; - # decide which one to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd=$ECHO - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -eq "$ac_status"; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test 0 -ne "$ac_status"; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test no = "$lt_cv_ar_at_file"; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - bitrig* | openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test ia64 = "$host_cpu"; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Gets list of data symbols to import. - lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'" - # Adjust the below global symbol transforms to fixup imported variables. - lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'" - lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'" - lt_c_name_lib_hook="\ - -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\ - -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'" -else - # Disable hooks by default. - lt_cv_sys_global_symbol_to_import= - lt_cdecl_hook= - lt_c_name_hook= - lt_c_name_lib_hook= -fi - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n"\ -$lt_cdecl_hook\ -" -e 's/^T .* \(.*\)$/extern int \1();/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n"\ -$lt_c_name_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'" - -# Transform an extracted symbol line into symbol name with lib prefix and -# symbol address. -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\ -$lt_c_name_lib_hook\ -" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\ -" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\ -" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function, - # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\ -" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\ -" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\ -" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\ -" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE -/* DATA imports from DLLs on WIN32 can't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT_DLSYM_CONST -#elif defined __osf__ -/* This system does not cope well with relocations in const data. */ -# define LT_DLSYM_CONST -#else -# define LT_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS=conftstm.$ac_objext - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest$ac_exeext; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test yes = "$pipe_works"; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -# Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case $with_sysroot in #( - yes) - if test yes = "$GCC"; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5 -$as_echo "$with_sysroot" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5 -$as_echo_n "checking for a working dd... " >&6; } -if ${ac_cv_path_lt_DD+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -: ${lt_DD:=$DD} -if test -z "$lt_DD"; then - ac_path_lt_DD_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in dd; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext" - as_fn_executable_p "$ac_path_lt_DD" || continue -if "$ac_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=: -fi - $ac_path_lt_DD_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_lt_DD"; then - : - fi -else - ac_cv_path_lt_DD=$lt_DD -fi - -rm -f conftest.i conftest2.i conftest.out -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5 -$as_echo "$ac_cv_path_lt_DD" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5 -$as_echo_n "checking how to truncate binary pipes... " >&6; } -if ${lt_cv_truncate_bin+:} false; then : - $as_echo_n "(cached) " >&6 -else - printf 0123456789abcdef0123456789abcdef >conftest.i -cat conftest.i conftest.i >conftest2.i -lt_cv_truncate_bin= -if "$ac_cv_path_lt_DD" bs=32 count=1 conftest.out 2>/dev/null; then - cmp -s conftest.i conftest.out \ - && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1" -fi -rm -f conftest.i conftest2.i conftest.out -test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5 -$as_echo "$lt_cv_truncate_bin" >&6; } - - - - - - -# Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test no = "$enable_libtool_lock" || enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out what ABI is being produced by ac_compile, and set mode - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE=32 - ;; - *ELF-64*) - HPUX_IA64_MODE=64 - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test yes = "$lt_cv_prog_gnu_ld"; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -mips64*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - emul=elf - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - emul="${emul}32" - ;; - *64-bit*) - emul="${emul}64" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *MSB*) - emul="${emul}btsmip" - ;; - *LSB*) - emul="${emul}ltsmip" - ;; - esac - case `/usr/bin/file conftest.$ac_objext` in - *N32*) - emul="${emul}n32" - ;; - esac - LD="${LD-ld} -m $emul" - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. Note that the listed cases only cover the - # situations where additional linker options are needed (such as when - # doing 32-bit compilation for a host where ld defaults to 64-bit, or - # vice versa); the common cases where no linker options are needed do - # not appear in the list. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - case `/usr/bin/file conftest.o` in - *x86-64*) - LD="${LD-ld} -m elf32_x86_64" - ;; - *) - LD="${LD-ld} -m elf_i386" - ;; - esac - ;; - powerpc64le-*linux*) - LD="${LD-ld} -m elf32lppclinux" - ;; - powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - powerpcle-*linux*) - LD="${LD-ld} -m elf64lppc" - ;; - powerpc-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS=$CFLAGS - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test yes != "$lt_cv_cc_needs_belf"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS=$SAVE_CFLAGS - fi - ;; -*-*solaris*) - # Find out what ABI is being produced by ac_compile, and set linker - # options accordingly. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) - case $host in - i?86-*-solaris*|x86_64-*-solaris*) - LD="${LD-ld} -m elf_x86_64" - ;; - sparc*-*-solaris*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - # GNU ld 2.21 introduced _sol2 emulations. Use them if available. - if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then - LD=${LD-ld}_sol2 - fi - ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks=$enable_libtool_lock - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test yes != "$lt_cv_path_mainfest_tool"; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "$LT_MULTI_MODULE"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - # If there is a non-empty error log, and "single_module" - # appears in it, assume the flag caused a linker warning - if test -s conftest.err && $GREP single_module conftest.err; then - cat conftest.err >&5 - # Otherwise, if the output was created with a 0 exit code from - # the compiler, it worked. - elif test -f libconftest.dylib && test 0 = "$_lt_result"; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -s conftest.err && $GREP force_load conftest.err; then - cat conftest.err >&5 - elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - 10.[012][,.]*) - _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test yes = "$lt_cv_apple_cc_single_mod"; then - _lt_dar_single_mod='$single_module' - fi - if test yes = "$lt_cv_ld_exported_symbols_list"; then - _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib' - fi - if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifdef __STDC__ -# include -#else -# include -#endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -#define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='lacheck--tex-live-' - VERSION='1.26' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# For better backward compatibility. To be removed once Automake 1.9.x -# dies out for good. For more background, see: -# -# -mkdir_p='$(MKDIR_P)' - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. Yes, it's still used -# in the wild :-( We should find a proper way to deprecate it ... -AMTAR='$${TAR-tar}' - - -# We'll loop over all known methods to create a tar archive until one works. -_am_tools='gnutar pax cpio none' - -am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' - - - - - - -# POSIX will say in a future version that running "rm -f" with no argument -# is OK; and we want to be able to make that assumption in our Makefile -# recipes. So use an aggressive probe to check that the usage we want is -# actually supported "in the wild" to an acceptable degree. -# See automake bug#10828. -# To make any issue more visible, cause the running configure to be aborted -# by default if the 'rm' program in use doesn't match our expectations; the -# user can still override this though. -if rm -f && rm -fr && rm -rf; then : OK; else - cat >&2 <<'END' -Oops! - -Your 'rm' program seems unable to run without file operands specified -on the command line, even when the '-f' option is present. This is contrary -to the behaviour of most rm programs out there, and not conforming with -the upcoming POSIX standard: - -Please tell bug-automake@gnu.org about your system, including the value -of your $PATH and any error possibly output before this message. This -can help us improve future automake versions. - -END - if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then - echo 'Configuration will proceed anyway, since you have set the' >&2 - echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 - echo >&2 - else - cat >&2 <<'END' -Aborting the configuration process, to ensure you take notice of the issue. - -You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . - -If you want to complete the configuration process using your problematic -'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM -to "yes", and re-run configure. - -END - as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 - fi -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 -$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then : - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 -$as_echo "$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler accepts prototypes" >&5 -$as_echo_n "checking whether the compiler accepts prototypes... " >&6; } -if ${kb_cv_c_prototypes+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -int -main () -{ -extern void foo(int i,...); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - kb_cv_c_prototypes=yes -else - kb_cv_c_prototypes=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $kb_cv_c_prototypes" >&5 -$as_echo "$kb_cv_c_prototypes" >&6; } -if test "x$kb_cv_c_prototypes" = xno; then - as_fn_error $? "Sorry, your compiler does not understand prototypes." "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5 -$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } -if ${kpse_cv_warning_cflags+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$GCC" = xyes; then - kpse_cv_warning_cflags= -if test "x$enable_compiler_warnings" != xno; then - kpse_cv_warning_cflags="-Wimplicit -Wreturn-type" - case `$CC -dumpversion` in #( - 3.4.* | 4.*) : - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wdeclaration-after-statement" ;; #( - *) : - ;; -esac - case `$CC -dumpversion` in #( - 3.[234].* | 4.*) : - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wno-unknown-pragmas" ;; #( - *) : - ;; -esac - if test "x$enable_compiler_warnings" != xmin; then - kpse_cv_warning_cflags="-Wall -Wunused $kpse_cv_warning_cflags" - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wmissing-prototypes -Wmissing-declarations" - if test "x$enable_compiler_warnings" != xyes; then - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wparentheses -Wswitch -Wtrigraphs -Wpointer-arith" - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wcast-qual -Wcast-align -Wwrite-strings" - case `$CC -dumpversion` in #( - 3.4.* | 4.*) : - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wold-style-definition" ;; #( - *) : - ;; -esac - if test "x$enable_compiler_warnings" != xmax; then - kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wshadow" - fi - fi - fi -fi -elif test "x$enable_compiler_warnings" = xno; then - kpse_cv_warning_cflags= -else - kpse_cv_warning_cflags= # FIXME: warning flags for non-GNU C compilers -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $kpse_cv_warning_cflags" >&5 -$as_echo "$kpse_cv_warning_cflags" >&6; } -WARNING_CFLAGS=$kpse_cv_warning_cflags - - - - - - - - - - - - -# Set options -enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_AS="${ac_tool_prefix}as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AS=$ac_cv_prog_AS -if test -n "$AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5 -$as_echo "$AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_AS"; then - ac_ct_AS=$AS - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AS+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AS"; then - ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_AS="as" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AS=$ac_cv_prog_ac_ct_AS -if test -n "$ac_ct_AS"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5 -$as_echo "$ac_ct_AS" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_AS" = x; then - AS="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AS=$ac_ct_AS - fi -else - AS="$ac_cv_prog_AS" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - - ;; -esac - -test -z "$AS" && AS=as - - - - - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - enable_dlopen=no - - - - # Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - # Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_static=yes -fi - - - - - - - - - - -# Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; lt_p=${PACKAGE-default} - case $withval in - yes|no) pic_mode=$withval ;; - *) - pic_mode=default - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for lt_pkg in $withval; do - IFS=$lt_save_ifs - if test "X$lt_pkg" = "X$lt_p"; then - pic_mode=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - pic_mode=default -fi - - - - - - - - - # Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR, - for pkg in $enableval; do - IFS=$lt_save_ifs - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS=$lt_save_ifs - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - shared_archive_member_spec= -case $host,$enable_shared in -power*-*-aix[5-9]*,yes) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5 -$as_echo_n "checking which variant of shared library versioning to provide... " >&6; } - -# Check whether --with-aix-soname was given. -if test "${with_aix_soname+set}" = set; then : - withval=$with_aix_soname; case $withval in - aix|svr4|both) - ;; - *) - as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5 - ;; - esac - lt_cv_with_aix_soname=$with_aix_soname -else - if ${lt_cv_with_aix_soname+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_with_aix_soname=aix -fi - - with_aix_soname=$lt_cv_with_aix_soname -fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5 -$as_echo "$with_aix_soname" >&6; } - if test aix != "$with_aix_soname"; then - # For the AIX way of multilib, we name the shared archive member - # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o', - # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File. - # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag, - # the AIX toolchain works better with OBJECT_MODE set (default 32). - if test 64 = "${OBJECT_MODE-32}"; then - shared_archive_member_spec=shr_64 - else - shared_archive_member_spec=shr - fi - fi - ;; -*) - with_aix_soname=aix - ;; -esac - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS=$ltmain - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -#define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld=$lt_cv_prog_gnu_ld - -old_CC=$CC -old_CFLAGS=$CFLAGS - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/${ac_tool_prefix}file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD=$MAGIC_CMD - lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS=$lt_save_ifs - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/file"; then - lt_cv_path_MAGIC_CMD=$ac_dir/"file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD=$lt_cv_path_MAGIC_CMD - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS=$lt_save_ifs - MAGIC_CMD=$lt_save_MAGIC_CMD - ;; -esac -fi - -MAGIC_CMD=$lt_cv_path_MAGIC_CMD -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC=$CC -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test yes = "$GCC"; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test yes = "$GCC"; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - lt_prog_compiler_pic='-fPIC' - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the '-m68020' flag to GCC prevents building anything better, - # like '-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - if test -n "$lt_prog_compiler_pic"; then - lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" - fi - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test ia64 = "$host_cpu"; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - case $cc_basename in - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - case $host_os in - os2*) - lt_prog_compiler_static='$wl-static' - ;; - esac - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='$wl-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - case $cc_basename in - # old Intel for x86_64, which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ F* | *Sun*Fortran*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Qoption ld ' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - *Intel*\ [CF]*Compiler*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - *Portland\ Group*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms that do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_pic_works"; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test yes = "$lt_cv_prog_compiler_static_works"; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links=nottested -if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test no = "$hard_links"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ' (' and ')$', so one must not match beginning or - # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc', - # as well as any symbol that contains 'd'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test yes != "$GCC"; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd* | bitrig*) - with_gnu_ld=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test yes = "$with_gnu_ld"; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test yes = "$lt_use_gnu_ld_interface"; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='$wl' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - export_dynamic_flag_spec='$wl--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test ia64 != "$host_cpu"; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='$wl--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file, use it as - # is; otherwise, prepend EXPORTS... - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test linux-dietlibc = "$host_os"; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test no = "$tmp_diet" - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - nagfor*) # NAGFOR 5.3 - tmp_sharedflag='-Wl,-shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - tcc*) - export_dynamic_flag_spec='-rdynamic' - ;; - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test yes = "$supports_anon_versioning"; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test no = "$ld_shlibs"; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test ia64 = "$host_cpu"; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag= - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to GNU nm, but means don't demangle to AIX nm. - # Without the "-l" option, or with the "-B" option, AIX nm treats - # weak defined symbols like other global defined symbols, whereas - # GNU nm marks them as "W". - # While the 'weak' keyword is ignored in the Export File, we need - # it in the Import File for the 'aix-soname' feature, so we have - # to replace the "-B" option with "-P" for AIX nm. - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # have runtime linking enabled, and use it for executables. - # For shared libraries, we enable/disable runtime linking - # depending on the kind of the shared library created - - # when "with_aix_soname,aix_use_runtimelinking" is: - # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables - # "aix,yes" lib.so shared, rtl:yes, for executables - # lib.a static archive - # "both,no" lib.so.V(shr.o) shared, rtl:yes - # lib.a(lib.so.V) shared, rtl:no, for executables - # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a(lib.so.V) shared, rtl:no - # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables - # lib.a static archive - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then - aix_use_runtimelinking=yes - break - fi - done - if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then - # With aix-soname=svr4, we create the lib.so.V shared archives only, - # so we don't have lib.a shared libs to link our executables. - # We have to force runtime linking in this case. - aix_use_runtimelinking=yes - LDFLAGS="$LDFLAGS -Wl,-brtl" - fi - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='$wl-f,' - case $with_aix_soname,$aix_use_runtimelinking in - aix,*) ;; # traditional, no import file - svr4,* | *,yes) # use import file - # The Import File defines what to hardcode. - hardcode_direct=no - hardcode_direct_absolute=no - ;; - esac - - if test yes = "$GCC"; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`$CC -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test yes = "$aix_use_runtimelinking"; then - shared_flag="$shared_flag "'$wl-G' - fi - # Need to ensure runtime linking is disabled for the traditional - # shared library, or the linker may eventually find shared libraries - # /with/ Import File - we do not want to mix them. - shared_flag_aix='-shared' - shared_flag_svr4='-shared $wl-G' - else - # not using gcc - if test ia64 = "$host_cpu"; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test yes = "$aix_use_runtimelinking"; then - shared_flag='$wl-G' - else - shared_flag='$wl-bM:SRE' - fi - shared_flag_aix='$wl-bM:SRE' - shared_flag_svr4='$wl-G' - fi - fi - - export_dynamic_flag_spec='$wl-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag - else - if test ia64 = "$host_cpu"; then - hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test set = "${lt_cv_aix_libpath+set}"; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=/usr/lib:/lib - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' $wl-bernotok' - allow_undefined_flag=' $wl-berok' - if test yes = "$with_gnu_ld"; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d' - # -brtl affects multiple linker settings, -berok does not and is overridden later - compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`' - if test svr4 != "$with_aix_soname"; then - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname' - fi - if test aix != "$with_aix_soname"; then - archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp' - else - # used by -dlpreopen to get the symbols - archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir' - fi - archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames=' - archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then - cp "$export_symbols" "$output_objdir/$soname.def"; - echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp"; - else - $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile=$lt_outputfile.exe - lt_tool_outputfile=$lt_tool_outputfile.exe - ;; - esac~ - if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=.dll - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test yes = "$lt_cv_ld_force_load"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag=$_lt_dar_allow_undefined - case $cc_basename in - ifort*|nagfor*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test yes = "$_lt_dar_can_shared"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil" - archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil" - module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2.*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test yes = "$GCC"; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='$wl-E' - ;; - - hpux10*) - if test yes,no = "$GCC,$with_gnu_ld"; then - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test yes,no = "$GCC,$with_gnu_ld"; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS=$save_LDFLAGS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test yes = "$lt_cv_prog_compiler__b"; then - archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test no = "$with_gnu_ld"; then - hardcode_libdir_flag_spec='$wl+b $wl$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='$wl-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test yes = "$GCC"; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS=$LDFLAGS - LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test yes = "$lt_cv_irix_exported_symbol"; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - linux*) - case $cc_basename in - tcc*) - # Fabrice Bellard et al's Tiny C Compiler - ld_shlibs=yes - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd* | bitrig*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - export_dynamic_flag_spec='$wl-E' - else - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='$wl-rpath,$libdir' - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - shrext_cmds=.dll - archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~ - $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~ - $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~ - $ECHO EXPORTS >> $output_objdir/$libname.def~ - prefix_cmds="$SED"~ - if test EXPORTS = "`$SED 1q $export_symbols`"; then - prefix_cmds="$prefix_cmds -e 1d"; - fi~ - prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~ - cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~ - $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~ - emximp -o $lib $output_objdir/$libname.def' - old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' - enable_shared_with_static_runtimes=yes - ;; - - osf3*) - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test yes = "$GCC"; then - allow_undefined_flag=' $wl-expect_unresolved $wl\*' - archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib' - hardcode_libdir_flag_spec='$wl-rpath $wl$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test yes = "$GCC"; then - wlarc='$wl' - archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='$wl' - archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands '-z linker_flag'. GCC discards it without '$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test yes = "$GCC"; then - whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test sequent = "$host_vendor"; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='$wl-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We CANNOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='$wl-z,text' - allow_undefined_flag='$wl-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='$wl-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='$wl-Bexport' - runpath_var='LD_RUN_PATH' - - if test yes = "$GCC"; then - archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test sni = "$host_vendor"; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='$wl-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test no = "$ld_shlibs" && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test yes,yes = "$GCC,$enable_shared"; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test yes = "$GCC"; then - case $host_os in - darwin*) lt_awk_arg='/^libraries:/,/LR/' ;; - *) lt_awk_arg='/^libraries:/' ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;; - *) lt_sed_strip_eq='s|=/|/|g' ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary... - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - # ...but if some path component already ends with the multilib dir we assume - # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer). - case "$lt_multi_os_dir; $lt_search_path_spec " in - "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*) - lt_multi_os_dir= - ;; - esac - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir" - elif test -n "$lt_multi_os_dir"; then - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS = " "; FS = "/|\n";} { - lt_foo = ""; - lt_count = 0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo = "/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's|/\([A-Za-z]:\)|\1|g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=.so -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='$libname$release$shared_ext$major' - ;; - -aix[4-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test ia64 = "$host_cpu"; then - # AIX 5 supports IA64 - library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line '#! .'. This would cause the generated library to - # depend on '.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # Using Import Files as archive members, it is possible to support - # filename-based versioning of shared library archives on AIX. While - # this would work for both with and without runtime linking, it will - # prevent static linking of such archives. So we do filename-based - # shared library versioning with .so extension only, which is used - # when both runtime linking and shared linking is enabled. - # Unfortunately, runtime linking may impact performance, so we do - # not want this to be the default eventually. Also, we use the - # versioned .so libs for executables only if there is the -brtl - # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only. - # To allow for filename-based versioning support, we need to create - # libNAME.so.V as an archive file, containing: - # *) an Import File, referring to the versioned filename of the - # archive as well as the shared archive member, telling the - # bitwidth (32 or 64) of that shared object, and providing the - # list of exported symbols of that shared object, eventually - # decorated with the 'weak' keyword - # *) the shared object with the F_LOADONLY flag set, to really avoid - # it being seen by the linker. - # At run time we better use the real file rather than another symlink, - # but for link time we create the symlink libNAME.so -> libNAME.so.V - - case $with_aix_soname,$aix_use_runtimelinking in - # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - aix,yes) # traditional libtool - dynamic_linker='AIX unversionable lib.so' - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - aix,no) # traditional AIX only - dynamic_linker='AIX lib.a(lib.so.V)' - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - ;; - svr4,*) # full svr4 only - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,yes) # both, prefer svr4 - dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)" - library_names_spec='$libname$release$shared_ext$major $libname$shared_ext' - # unpreferred sharedlib libNAME.a needs extra handling - postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"' - postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"' - # We do not specify a path in Import Files, so LIBPATH fires. - shlibpath_overrides_runpath=yes - ;; - *,no) # both, prefer aix - dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)" - library_names_spec='$libname$release.a $libname.a' - soname_spec='$libname$release$shared_ext$major' - # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling - postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)' - postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"' - ;; - esac - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='$libname$shared_ext' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' - library_names_spec='$libname.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec=$LIB - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$major$shared_ext $libname$shared_ext' - soname_spec='$libname$release$major$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[23].*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2.*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -haiku*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=no - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - if test 32 = "$HPUX_IA64_MODE"; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test yes = "$lt_cv_prog_gnu_ld"; then - version_type=linux # correct to gnu/linux during the next big refactor - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff" - sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -linux*android*) - version_type=none # Android doesn't support versioned libraries. - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext' - soname_spec='$libname$release$shared_ext' - finish_cmds= - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - dynamic_linker='Android linker' - # Don't embed -rpath directories since the linker doesn't support them. - hardcode_libdir_flag_spec='-L$libdir' - ;; - -# This must be glibc/ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd* | bitrig*) - version_type=sunos - sys_lib_dlsearch_path_spec=/usr/lib - need_lib_prefix=no - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then - need_version=no - else - need_version=yes - fi - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -os2*) - libname_spec='$name' - version_type=windows - shrext_cmds=.dll - need_version=no - need_lib_prefix=no - # OS/2 can only load a DLL with a base name of 8 characters or less. - soname_spec='`test -n "$os2dllname" && libname="$os2dllname"; - v=$($ECHO $release$versuffix | tr -d .-); - n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _); - $ECHO $n$v`$shared_ext' - library_names_spec='${libname}_dll.$libext' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=BEGINLIBPATH - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - postinstall_cmds='base_file=`basename \$file`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='$libname$release$shared_ext$major' - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test yes = "$with_gnu_ld"; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec; then - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext' - soname_spec='$libname$shared_ext.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=sco - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test yes = "$with_gnu_ld"; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux # correct to gnu/linux during the next big refactor - need_lib_prefix=no - need_version=no - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux # correct to gnu/linux during the next big refactor - library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext' - soname_spec='$libname$release$shared_ext$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test no = "$dynamic_linker" && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test yes = "$GCC"; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then - sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec -fi -if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then - sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test yes = "$hardcode_automatic"; then - - # We can hardcode non-existent directories. - if test no != "$hardcode_direct" && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" && - test no != "$hardcode_minus_L"; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test relink = "$hardcode_action" || - test yes = "$inherit_rpath"; then - # Fast installation is not supported - enable_fast_install=no -elif test yes = "$shlibpath_overrides_runpath" || - test no = "$enable_shared"; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test yes != "$enable_dlopen"; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen=load_add_on - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen=LoadLibrary - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - - lt_cv_dlopen=dyld - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - tpf*) - # Don't try to run any link tests for TPF. We know it's impossible - # because TPF is a cross-compiler, and we know how we open DSOs. - lt_cv_dlopen=dlopen - lt_cv_dlopen_libs= - lt_cv_dlopen_self=no - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen=shl_load -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen=dlopen -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test no = "$lt_cv_dlopen"; then - enable_dlopen=no - else - enable_dlopen=yes - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS=$CPPFLAGS - test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS=$LDFLAGS - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS=$LIBS - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test yes = "$lt_cv_dlopen_self"; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test yes = "$cross_compiling"; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisibility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS=$save_CPPFLAGS - LDFLAGS=$save_LDFLAGS - LIBS=$save_LIBS - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report what library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test no = "$can_build_shared" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test yes = "$enable_shared" && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test ia64 != "$host_cpu"; then - case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in - yes,aix,yes) ;; # shared object as lib.so file only - yes,svr4,*) ;; # shared object as lib.so archive member only - yes,*) enable_static=no ;; # shared object in lib.a archive as well - esac - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test yes = "$enable_shared" || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC=$lt_save_CC - - - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - -# Check whether --enable-largefile was given. -if test "${enable_largefile+set}" = set; then : - enableval=$enable_largefile; -fi - -if test "$enable_largefile" != no; then - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5 -$as_echo_n "checking for special C compiler options needed for large files... " >&6; } -if ${ac_cv_sys_largefile_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_sys_largefile_CC=no - if test "$GCC" != yes; then - ac_save_CC=$CC - while :; do - # IRIX 6.2 and later do not support large files by default, - # so use the C compiler's -n32 option if that helps. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF - if ac_fn_c_try_compile "$LINENO"; then : - break -fi -rm -f core conftest.err conftest.$ac_objext - CC="$CC -n32" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_largefile_CC=' -n32'; break -fi -rm -f core conftest.err conftest.$ac_objext - break - done - CC=$ac_save_CC - rm -f conftest.$ac_ext - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5 -$as_echo "$ac_cv_sys_largefile_CC" >&6; } - if test "$ac_cv_sys_largefile_CC" != no; then - CC=$CC$ac_cv_sys_largefile_CC - fi - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5 -$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; } -if ${ac_cv_sys_file_offset_bits+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=no; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _FILE_OFFSET_BITS 64 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_file_offset_bits=64; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_file_offset_bits=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5 -$as_echo "$ac_cv_sys_file_offset_bits" >&6; } -case $ac_cv_sys_file_offset_bits in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits -_ACEOF -;; -esac -rm -rf conftest* - if test $ac_cv_sys_file_offset_bits = unknown; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5 -$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; } -if ${ac_cv_sys_large_files+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=no; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGE_FILES 1 -#include - /* Check that off_t can represent 2**63 - 1 correctly. - We can't simply define LARGE_OFF_T to be 9223372036854775807, - since some C++ compilers masquerading as C compilers - incorrectly reject 9223372036854775807. */ -#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62)) - int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721 - && LARGE_OFF_T % 2147483647 == 1) - ? 1 : -1]; -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_sys_large_files=1; break -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_cv_sys_large_files=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5 -$as_echo "$ac_cv_sys_large_files" >&6; } -case $ac_cv_sys_large_files in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _LARGE_FILES $ac_cv_sys_large_files -_ACEOF -;; -esac -rm -rf conftest* - fi - - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGEFILE_SOURCE value needed for large files" >&5 -$as_echo_n "checking for _LARGEFILE_SOURCE value needed for large files... " >&6; } -if ${ac_cv_sys_largefile_source+:} false; then : - $as_echo_n "(cached) " >&6 -else - while :; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include /* for off_t */ - #include -int -main () -{ -int (*fp) (FILE *, off_t, int) = fseeko; - return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_sys_largefile_source=no; break -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#define _LARGEFILE_SOURCE 1 -#include /* for off_t */ - #include -int -main () -{ -int (*fp) (FILE *, off_t, int) = fseeko; - return fseeko (stdin, 0, 0) && fp (stdin, 0, 0); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_sys_largefile_source=1; break -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_cv_sys_largefile_source=unknown - break -done -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_source" >&5 -$as_echo "$ac_cv_sys_largefile_source" >&6; } -case $ac_cv_sys_largefile_source in #( - no | unknown) ;; - *) -cat >>confdefs.h <<_ACEOF -#define _LARGEFILE_SOURCE $ac_cv_sys_largefile_source -_ACEOF -;; -esac -rm -rf conftest* - -# We used to try defining _XOPEN_SOURCE=500 too, to work around a bug -# in glibc 2.1.3, but that breaks too many other things. -# If you want fseeko and ftello with glibc, upgrade to a fixed glibc. -if test $ac_cv_sys_largefile_source != unknown; then - -$as_echo "#define HAVE_FSEEKO 1" >>confdefs.h - -fi - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h; do - as_ac_Header=`$as_echo "ac_cv_header_dirent_$ac_hdr" | $as_tr_sh` -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_hdr that defines DIR" >&5 -$as_echo_n "checking for $ac_hdr that defines DIR... " >&6; } -if eval \${$as_ac_Header+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include <$ac_hdr> - -int -main () -{ -if ((DIR *) 0) -return 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$as_ac_Header=yes" -else - eval "$as_ac_Header=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$as_ac_Header - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_hdr" | $as_tr_cpp` 1 -_ACEOF - -ac_header_dirent=$ac_hdr; break -fi - -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' dir; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing opendir" >&5 -$as_echo_n "checking for library containing opendir... " >&6; } -if ${ac_cv_search_opendir+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_func_search_save_LIBS=$LIBS -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char opendir (); -int -main () -{ -return opendir (); - ; - return 0; -} -_ACEOF -for ac_lib in '' x; do - if test -z "$ac_lib"; then - ac_res="none required" - else - ac_res=-l$ac_lib - LIBS="-l$ac_lib $ac_func_search_save_LIBS" - fi - if ac_fn_c_try_link "$LINENO"; then : - ac_cv_search_opendir=$ac_res -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext - if ${ac_cv_search_opendir+:} false; then : - break -fi -done -if ${ac_cv_search_opendir+:} false; then : - -else - ac_cv_search_opendir=no -fi -rm conftest.$ac_ext -LIBS=$ac_func_search_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_opendir" >&5 -$as_echo "$ac_cv_search_opendir" >&6; } -ac_res=$ac_cv_search_opendir -if test "$ac_res" != no; then : - test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" - -fi - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "#define STDC_HEADERS 1" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether closedir returns void" >&5 -$as_echo_n "checking whether closedir returns void... " >&6; } -if ${ac_cv_func_closedir_void+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - ac_cv_func_closedir_void=yes -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$ac_includes_default -#include <$ac_header_dirent> -#ifndef __cplusplus -int closedir (); -#endif - -int -main () -{ -return closedir (opendir (".")) != 0; - ; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - ac_cv_func_closedir_void=no -else - ac_cv_func_closedir_void=yes -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_closedir_void" >&5 -$as_echo "$ac_cv_func_closedir_void" >&6; } -if test $ac_cv_func_closedir_void = yes; then - -$as_echo "#define CLOSEDIR_VOID 1" >>confdefs.h - -fi - -for ac_header in assert.h float.h limits.h pwd.h stdlib.h sys/param.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - -for ac_func in putenv strcasecmp strtol strstr -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -for ac_func in getcwd getwd memcmp memcpy mkstemp mktemp strchr strrchr -do : - as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh` -ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var" -if eval test \"x\$"$as_ac_var"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1 -_ACEOF - -fi -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5 -$as_echo_n "checking for an ANSI C-conforming const... " >&6; } -if ${ac_cv_c_const+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - -#ifndef __cplusplus - /* Ultrix mips cc rejects this sort of thing. */ - typedef int charset[2]; - const charset cs = { 0, 0 }; - /* SunOS 4.1.1 cc rejects this. */ - char const *const *pcpcc; - char **ppc; - /* NEC SVR4.0.2 mips cc rejects this. */ - struct point {int x, y;}; - static struct point const zero = {0,0}; - /* AIX XL C 1.02.0.0 rejects this. - It does not let you subtract one const X* pointer from another in - an arm of an if-expression whose if-part is not a constant - expression */ - const char *g = "string"; - pcpcc = &g + (g ? g-g : 0); - /* HPUX 7.0 cc rejects these. */ - ++pcpcc; - ppc = (char**) pcpcc; - pcpcc = (char const *const *) ppc; - { /* SCO 3.2v4 cc rejects this sort of thing. */ - char tx; - char *t = &tx; - char const *s = 0 ? (char *) 0 : (char const *) 0; - - *t++ = 0; - if (s) return 0; - } - { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ - int x[] = {25, 17}; - const int *foo = &x[0]; - ++foo; - } - { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ - typedef const int *iptr; - iptr p = 0; - ++p; - } - { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying - "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ - struct s { int j; const int *ap[3]; } bx; - struct s *b = &bx; b->j = 5; - } - { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; - if (!foo) return 0; - } - return !cs[0] && !zero.x; -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_const=yes -else - ac_cv_c_const=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5 -$as_echo "$ac_cv_c_const" >&6; } -if test $ac_cv_c_const = no; then - -$as_echo "#define const /**/" >>confdefs.h - -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5 -$as_echo_n "checking for inline... " >&6; } -if ${ac_cv_c_inline+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#ifndef __cplusplus -typedef int foo_t; -static $ac_kw foo_t static_foo () {return 0; } -$ac_kw foo_t foo () {return 0; } -#endif - -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_c_inline=$ac_kw -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - test "$ac_cv_c_inline" != no && break -done - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5 -$as_echo "$ac_cv_c_inline" >&6; } - -case $ac_cv_c_inline in - inline | yes) ;; - *) - case $ac_cv_c_inline in - no) ac_val=;; - *) ac_val=$ac_cv_c_inline;; - esac - cat >>confdefs.h <<_ACEOF -#ifndef __cplusplus -#define inline $ac_val -#endif -_ACEOF - ;; -esac - -ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default" -if test "x$ac_cv_type_size_t" = xyes; then : - -else - -cat >>confdefs.h <<_ACEOF -#define size_t unsigned int -_ACEOF - -fi - -ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t" -case $ac_cv_c_int64_t in #( - no|yes) ;; #( - *) - -cat >>confdefs.h <<_ACEOF -#define int64_t $ac_cv_c_int64_t -_ACEOF -;; -esac - -ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t" -case $ac_cv_c_uint64_t in #( - no|yes) ;; #( - *) - -$as_echo "#define _UINT64_T 1" >>confdefs.h - - -cat >>confdefs.h <<_ACEOF -#define uint64_t $ac_cv_c_uint64_t -_ACEOF -;; - esac - -case :$ac_cv_c_int64_t:$ac_cv_c_int64_t: in #( - *':no:'*) : - as_fn_error $? "Sorry, your compiler does not support 64-bit integer types." "$LINENO" 5 ;; #( - *) : - ;; -esac -ac_fn_c_check_member "$LINENO" "struct stat" "st_mtim" "ac_cv_member_struct_stat_st_mtim" "$ac_includes_default" -if test "x$ac_cv_member_struct_stat_st_mtim" = xyes; then : - -cat >>confdefs.h <<_ACEOF -#define HAVE_STRUCT_STAT_ST_MTIM 1 -_ACEOF - - -fi - - - -for ac_prog in flex lex -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LEX+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LEX"; then - ac_cv_prog_LEX="$LEX" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then - ac_cv_prog_LEX="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LEX=$ac_cv_prog_LEX -if test -n "$LEX"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5 -$as_echo "$LEX" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$LEX" && break -done -test -n "$LEX" || LEX=":" - -if test "x$LEX" != "x:"; then - cat >conftest.l <<_ACEOF -%% -a { ECHO; } -b { REJECT; } -c { yymore (); } -d { yyless (1); } -e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ - yyless ((input () != 0)); } -f { unput (yytext[0]); } -. { BEGIN INITIAL; } -%% -#ifdef YYTEXT_POINTER -extern char *yytext; -#endif -int -main (void) -{ - return ! yylex () + ! yywrap (); -} -_ACEOF -{ { ac_try="$LEX conftest.l" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$LEX conftest.l") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5 -$as_echo_n "checking lex output file root... " >&6; } -if ${ac_cv_prog_lex_root+:} false; then : - $as_echo_n "(cached) " >&6 -else - -if test -f lex.yy.c; then - ac_cv_prog_lex_root=lex.yy -elif test -f lexyy.c; then - ac_cv_prog_lex_root=lexyy -else - as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5 -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5 -$as_echo "$ac_cv_prog_lex_root" >&6; } -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root - -if test -z "${LEXLIB+set}"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5 -$as_echo_n "checking lex library... " >&6; } -if ${ac_cv_lib_lex+:} false; then : - $as_echo_n "(cached) " >&6 -else - - ac_save_LIBS=$LIBS - ac_cv_lib_lex='none needed' - for ac_lib in '' -lfl -ll; do - LIBS="$ac_lib $ac_save_LIBS" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -`cat $LEX_OUTPUT_ROOT.c` -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_lex=$ac_lib -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - test "$ac_cv_lib_lex" != 'none needed' && break - done - LIBS=$ac_save_LIBS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5 -$as_echo "$ac_cv_lib_lex" >&6; } - test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5 -$as_echo_n "checking whether yytext is a pointer... " >&6; } -if ${ac_cv_prog_lex_yytext_pointer+:} false; then : - $as_echo_n "(cached) " >&6 -else - # POSIX says lex can declare yytext either as a pointer or an array; the -# default is implementation-dependent. Figure out which it is, since -# not all implementations provide the %pointer and %array declarations. -ac_cv_prog_lex_yytext_pointer=no -ac_save_LIBS=$LIBS -LIBS="$LEXLIB $ac_save_LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - #define YYTEXT_POINTER 1 -`cat $LEX_OUTPUT_ROOT.c` -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_prog_lex_yytext_pointer=yes -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_save_LIBS - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5 -$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; } -if test $ac_cv_prog_lex_yytext_pointer = yes; then - -$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h - -fi -rm -f conftest.l $LEX_OUTPUT_ROOT.c - -fi - -ac_config_headers="$ac_config_headers config.h" - - -ac_config_files="$ac_config_files Makefile" - - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 -$as_echo_n "checking that generated files are newer than configure... " >&6; } - if test -n "$am_sleep_pid"; then - # Hide warnings about reused PIDs. - wait $am_sleep_pid 2>/dev/null - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 -$as_echo "done" >&6; } - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -pR'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -pR' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -pR' - fi -else - as_ln_s='cp -pR' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - - -# as_fn_executable_p FILE -# ----------------------- -# Test if FILE is an executable regular file. -as_fn_executable_p () -{ - test -f "$1" && test -x "$1" -} # as_fn_executable_p -as_test_x='test -x' -as_executable_p=as_fn_executable_p - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by LaCheck (TeX Live) $as_me 1.26, which was -generated by GNU Autoconf 2.69. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -LaCheck (TeX Live) config.status 1.26 -configured by $0, generated by GNU Autoconf 2.69, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2012 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in AS \ -DLLTOOL \ -OBJDUMP \ -SHELL \ -ECHO \ -PATH_SEPARATOR \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_import \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -lt_cv_nm_interface \ -nm_file_list_spec \ -lt_cv_truncate_bin \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' - -# See if we are running on zsh, and set the options that allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Older Autoconf quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options that allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}"; then - setopt NO_GLOB_SUBST - fi - - cfgfile=${ofile}T - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL -# Generated automatically by $as_me ($PACKAGE) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. - -# Provide generalized library-building support services. -# Written by Gordon Matzigkeit, 1996 - -# Copyright (C) 2014 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# GNU Libtool is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of of the License, or -# (at your option) any later version. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program or library that is built -# using GNU Libtool, you may include this file under the same -# distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . - - -# The names of the tagged configurations supported by this script. -available_tags='' - -# ### BEGIN LIBTOOL CONFIG - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Assembler program. -AS=$lt_AS - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Object dumper program. -OBJDUMP=$lt_OBJDUMP - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shared archive member basename,for filename based shared library versioning on AIX. -shared_archive_member_spec=$shared_archive_member_spec - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The PATH separator for the build system. -PATH_SEPARATOR=$lt_PATH_SEPARATOR - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm into a list of symbols to manually relocate. -global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# The name lister interface. -nm_interface=$lt_lt_cv_nm_interface - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and where our libraries should be installed. -lt_sysroot=$lt_sysroot - -# Command to truncate a binary pipe. -lt_truncate_bin=$lt_lt_cv_truncate_bin - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \$shlibpath_var if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test set != "${COLLECT_NAMES+set}"; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain=$ac_aux_dir/ltmain.sh - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - diff --git a/Build/source/texk/lacheck/configure.ac b/Build/source/texk/lacheck/configure.ac deleted file mode 100644 index 25f01422ad5..00000000000 --- a/Build/source/texk/lacheck/configure.ac +++ /dev/null @@ -1,29 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. -dnl -dnl Copyright (C) 2009-2013 Peter Breitenlohner -dnl -dnl This file is free software; the copyright holder -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. -dnl -m4_define([lacheck_version], [1.26])[]dnl using unmodified lacheck source tree -AC_INIT([LaCheck (TeX Live)], lacheck_version, [tex-k@tug.org]) -AC_PREREQ([2.65]) -AC_CONFIG_SRCDIR([lacheck-]lacheck_version[/lacheck.l]) -AC_CONFIG_AUX_DIR([../../build-aux]) -AC_CONFIG_MACRO_DIR([../../m4]) - -REV='lacheck_version' -AC_SUBST([REV], [lacheck_version]) -AC_SUBST([LACHECK_TREE], [lacheck-]lacheck_version) - -dnl Common code for all programs using libkpathsea. -KPSE_COMMON([lacheck]) - -AC_PROG_LEX - -AC_CONFIG_HEADERS([config.h]) - -AC_CONFIG_FILES([Makefile]) - -AC_OUTPUT diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/ChangeLog b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/ChangeLog deleted file mode 100644 index 71bd3392fb1..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/ChangeLog +++ /dev/null @@ -1,23 +0,0 @@ -2012-06-22 Peter Breitenlohner - - * patch-06-buffer-overrun (new): Avoid buffer overrun for long - pathnames (detected by Ken Brown ). - -2012-06-19 Peter Breitenlohner - - * patch-05-never-interactive (new): Added the never-interactive - option to prevent flex from creating a problematic prototype for - isatty(). - -2010-12-10 Peter Breitenlohner - - Patches applied to lacheck-1.26 as obtained from CTAN. - * patch-01-WIN32: #include for WIN32, but not - for __MINGW32__. - * patch-02-ANSI: ANSI C function protos and definitions. - Declare param1 of push() as const. Avoid ambiguous `else'. - Define yywrap() after flex-provided prototype. - * patch-03-unsigned-char: Change param1 of push() and - member s_name of struct tex_group from 'unsigned char *' to - 'char *' and drop or adjust casts accordingly. - * patch-04-manpage: Formatting. Avoid use of build date. diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/TL-Changes b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/TL-Changes deleted file mode 100644 index a484b7a7280..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/TL-Changes +++ /dev/null @@ -1,9 +0,0 @@ -Changes applied to the lacheck-1.26 tree as obtained from: - http://mirror.ctan.org/support/lacheck/lacheck-1.26.tar.gz - -Renamed: - lacheck.lex -> lacheck.l - -Updated: - lacheck.c - diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-01-WIN32 b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-01-WIN32 deleted file mode 100644 index 4baf9b833c9..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-01-WIN32 +++ /dev/null @@ -1,14 +0,0 @@ -diff -ur -x lacheck.c lacheck-1.26.orig/lacheck.l lacheck-1.26/lacheck.l ---- lacheck-1.26.orig/lacheck.l 1998-03-07 08:47:31.000000000 +0100 -+++ lacheck-1.26/lacheck.l 2010-02-20 12:35:04.000000000 +0100 -@@ -117,6 +117,10 @@ - - #include - #include -+ -+#if defined(WIN32) && !defined(__MINGW32__) -+#include -+#endif - /* #include */ - - /* extern char *realloc(); */ diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-02-ANSI b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-02-ANSI deleted file mode 100644 index bb6654b4ef7..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-02-ANSI +++ /dev/null @@ -1,176 +0,0 @@ -diff -ur lacheck-1.26.orig/lacheck.l lacheck-1.26/lacheck.l ---- lacheck-1.26.orig/lacheck.l 2010-02-20 12:35:04.000000000 +0100 -+++ lacheck-1.26/lacheck.l 2010-12-09 23:22:45.000000000 +0100 -@@ -125,8 +125,6 @@ - - /* extern char *realloc(); */ - --int yywrap() { return 1; } -- - #ifdef NEED_STRSTR - char *strstr(); - #endif -@@ -144,16 +142,16 @@ - #define CG_ITALIC gstack[gstackp-1].italic - #define CG_FILE gstack[gstackp-1].s_file - --char *bg_command(); --void pop(); --void push(); --void linecount(); --void g_checkend(); --void e_checkend(); --void f_checkend(); --void input_file(); --void print_bad_match(); --int check_top_level_end(); -+char *bg_command(char *name); -+void pop(void); -+void push(const char *p_name, int p_type, int p_line); -+void linecount(void); -+void g_checkend(int n); -+void e_checkend(int n, char *name); -+void f_checkend(char *name); -+void input_file(char *file_nam); -+void print_bad_match(char *end_command, int type); -+int check_top_level_end(char *end_command, int type); - - /* global variables */ - -@@ -764,9 +762,7 @@ - - . { ; } - %% --int main( argc, argv ) --int argc; --char *argv[]; -+int main(int argc, char *argv[]) - { - /* allocate initial stacks */ - gstack = (tex_group *)malloc(gstack_size * sizeof(tex_group)); -@@ -824,6 +820,8 @@ - return(0); - } - -+int yywrap(void) { return 1; } -+ - #ifdef NEED_STRSTR - char * - strstr(string, substring) -@@ -860,10 +858,7 @@ - } - #endif /* NEED_STRSTR */ - --void push(p_name, p_type, p_line) --unsigned char *p_name; --int p_type; --int p_line; -+void push(const unsigned char *p_name, int p_type, int p_line) - { - if ( gstackp == gstack_size ) { /* extend stack */ - gstack_size *= 2; -@@ -895,8 +890,7 @@ - - } - --void input_file(file_nam) --char *file_nam; -+void input_file(char *file_nam) - { - char *tmp_file_name; - FILE *tmp_yyin; -@@ -953,7 +947,7 @@ - } - } - --void pop() -+void pop(void) - { - if ( gstackp == 0 ) - { -@@ -966,8 +960,7 @@ - free(gstack[gstackp].s_file); - } - --char *bg_command(name) --char *name; -+char *bg_command(char *name) - { - - switch (CG_TYPE) { -@@ -1001,9 +994,7 @@ - return ((char *)returnval); - } - --char *eg_command(name,type) --int type; --char *name; -+static char *eg_command(char *name, int type) - { - - switch (type) { -@@ -1038,19 +1029,18 @@ - } - - --void g_checkend(n) --int n; -+void g_checkend(int n) - { - if ( check_top_level_end(yytext,n) == 1 ) -+ { - if ( CG_TYPE != n ) - print_bad_match(yytext,n); - else - pop(); -+ } - } - --void e_checkend(n, name) --int n; --char *name; -+void e_checkend(int n, char *name) - { - if ( check_top_level_end(name,n) == 1 ) - { -@@ -1062,8 +1052,7 @@ - } - } - --void f_checkend(name) --char *name; -+void f_checkend(char *name) - { - if ( check_top_level_end(name,3) == 1 ) - { -@@ -1079,9 +1068,7 @@ - } - } - --void print_bad_match(end_command,type) --char *end_command; --int type; -+void print_bad_match(char *end_command, int type) - { - printf("\"%s\", line %d: <- unmatched \"%s\"\n", - file_name, -@@ -1095,9 +1082,7 @@ - warn_count += 2; - } - --int check_top_level_end(end_command,type) --char *end_command; --int type; -+int check_top_level_end(char *end_command, int type) - { - if ( gstackp == 0 ) - { -@@ -1112,7 +1097,7 @@ - return(1); - } - --void linecount() -+void linecount(void) - { - int i; - for (i = 0; i < yyleng; i++) diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-03-unsigned-char b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-03-unsigned-char deleted file mode 100644 index e5b07bcfee0..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-03-unsigned-char +++ /dev/null @@ -1,56 +0,0 @@ -diff -ur lacheck-1.26.orig/lacheck.l lacheck-1.26/lacheck.l ---- lacheck-1.26.orig/lacheck.l 2010-12-09 23:22:45.000000000 +0100 -+++ lacheck-1.26/lacheck.l 2010-12-09 23:25:22.000000000 +0100 -@@ -136,7 +136,7 @@ - - /* macros */ - --#define CG_NAME (char *)gstack[gstackp-1].s_name -+#define CG_NAME gstack[gstackp-1].s_name - #define CG_TYPE gstack[gstackp-1].s_type - #define CG_LINE gstack[gstackp-1].s_line - #define CG_ITALIC gstack[gstackp-1].italic -@@ -165,7 +165,7 @@ - - typedef struct tex_group - { -- unsigned char *s_name; -+ char *s_name; - int s_type; - int s_line; - int italic; -@@ -467,7 +467,7 @@ - - \\begingroup/[^a-zA-Z] { - { -- push((unsigned char *)"\\begingroup", 1, line_count); -+ push("\\begingroup", 1, line_count); - }} - - -@@ -858,7 +858,7 @@ - } - #endif /* NEED_STRSTR */ - --void push(const unsigned char *p_name, int p_type, int p_line) -+void push(const char *p_name, int p_type, int p_line) - { - if ( gstackp == gstack_size ) { /* extend stack */ - gstack_size *= 2; -@@ -870,14 +870,14 @@ - } - - if ( (gstack[gstackp].s_name = -- (unsigned char *)malloc(strlen((char *)p_name) + 1)) == NULL || -+ (char *)malloc(strlen(p_name) + 1)) == NULL || - (gstack[gstackp].s_file = - (char *)malloc(strlen(file_name) + 1)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - -- strcpy((char *)gstack[gstackp].s_name,(char *)p_name); -+ strcpy(gstack[gstackp].s_name, p_name); - gstack[gstackp].s_type = p_type; - gstack[gstackp].s_line = p_line; - gstack[gstackp].italic = ( (p_type == 4 || p_type == 5) diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-04-manpage b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-04-manpage deleted file mode 100644 index 1e482cfbb63..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-04-manpage +++ /dev/null @@ -1,18 +0,0 @@ -diff -ur lacheck-1.26.orig/lacheck.man lacheck-1.26/lacheck.man ---- lacheck-1.26.orig/lacheck.man 1998-03-07 08:47:31.000000000 +0100 -+++ lacheck-1.26/lacheck.man 2010-12-10 11:38:32.032814793 +0100 -@@ -1,12 +1,9 @@ --.TH "LaCheck" "1" "%%LACHECKDATE%%" "%%LACHECKREV%%" -+.TH "LaCheck" "1" "2010-12-10" "%%LACHECKREV%%" - .SH NAME - lacheck - A consistency checker for LaTeX documents. - .SH SYNOPSIS - .B lacheck --.I filename --[ --.I .tex --] -+.IR filename [ \fB.tex\fP ] - .SH DESCRIPTION - LaCheck is a general purpose consistency checker for LaTeX documents. - It reads a LaTeX document and displays warning messages, if it finds diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-05-never-interactive b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-05-never-interactive deleted file mode 100644 index ab5773dcfeb..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-05-never-interactive +++ /dev/null @@ -1,12 +0,0 @@ -diff -ur lacheck-1.26.orig/lacheck.l lacheck-1.26/lacheck.l ---- lacheck-1.26.orig/lacheck.l 2010-12-09 23:25:22.000000000 +0100 -+++ lacheck-1.26/lacheck.l 2012-06-19 15:11:14.000000000 +0200 -@@ -113,6 +113,8 @@ - * Initial distribution version. - */ - -+%option never-interactive -+ - %{ - - #include diff --git a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-06-buffer-overrun b/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-06-buffer-overrun deleted file mode 100644 index 1386c338f33..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26-PATCHES/patch-06-buffer-overrun +++ /dev/null @@ -1,144 +0,0 @@ -diff -ur lacheck-1.26.orig/lacheck.l lacheck-1.26/lacheck.l ---- lacheck-1.26.orig/lacheck.l 2012-06-19 15:11:14.000000000 +0200 -+++ lacheck-1.26/lacheck.l 2012-06-22 11:04:33.000000000 +0200 -@@ -144,7 +144,6 @@ - #define CG_ITALIC gstack[gstackp-1].italic - #define CG_FILE gstack[gstackp-1].s_file - --char *bg_command(char *name); - void pop(void); - void push(const char *p_name, int p_type, int p_line); - void linecount(void); -@@ -157,7 +156,6 @@ - - /* global variables */ - --char returnval[100]; - int line_count = 1; - int warn_count = 0; - char *file_name; -@@ -962,72 +960,58 @@ - free(gstack[gstackp].s_file); - } - --char *bg_command(char *name) -+static void print_bg_command(char *name) - { - - switch (CG_TYPE) { - - case 2: -- (void) strcpy( returnval, "\\begin{" ); -- (void) strcat( returnval, (char *) name); -- (void) strcat( returnval, "}" ); -+ printf("\\begin{%s}", name); - break; - - case 3: -- (void) strcpy( returnval, "beginning of file " ); -- (void) strcat( returnval, (char *) name); -+ printf("beginning of file %s", name); - break; - - case 4: -- (void) strcpy( returnval, "math begin " ); -- (void) strcat( returnval, (char *) name); -+ printf("math begin %s", name); - break; - - case 5: -- (void) strcpy( returnval, "display math begin " ); -- (void) strcat( returnval, (char *) name); -+ printf("display math begin %s", name); - break; - - default: -- (void) strcpy( returnval, name ); -+ printf("%s", name); - - } -- -- return ((char *)returnval); - } - --static char *eg_command(char *name, int type) -+static void print_eg_command(char *name, int type) - { - - switch (type) { - - case 2: -- (void) strcpy( returnval, "\\end{" ); -- (void) strcat( returnval, (char *) name); -- (void) strcat( returnval, "}" ); -+ printf("\\end{%s}", name); - break; - - case 3: -- (void) strcpy( returnval, "end of file " ); -- (void) strcat( returnval, (char *) name); -+ printf("end of file %s", name); - break; - - case 4: -- (void) strcpy( returnval, "math end " ); -- (void) strcat( returnval, (char *) name); -+ printf("math end %s", name); - break; - - case 5: -- (void) strcpy( returnval, "display math end " ); -- (void) strcat( returnval, (char *) name); -+ printf("display math end %s", name); - break; - - default: -- (void) strcpy( returnval, name ); -+ printf("%s", name); - break; - } -- -- return ((char *)returnval); - } - - -@@ -1072,15 +1056,17 @@ - - void print_bad_match(char *end_command, int type) - { -- printf("\"%s\", line %d: <- unmatched \"%s\"\n", -+ printf("\"%s\", line %d: <- unmatched \"", - file_name, -- line_count, -- eg_command( end_command , type) ) ; -+ line_count); -+ print_eg_command(end_command, type); -+ printf("\"\n"); - -- printf("\"%s\", line %d: -> unmatched \"%s\"\n", -+ printf("\"%s\", line %d: -> unmatched \"", - CG_FILE, -- CG_LINE, -- bg_command( CG_NAME ) ) ; -+ CG_LINE); -+ print_bg_command(CG_NAME); -+ printf("\"\n"); - warn_count += 2; - } - -@@ -1088,10 +1074,11 @@ - { - if ( gstackp == 0 ) - { -- printf("\"%s\", line %d: \"%s\" found at top level\n", -- file_name, -- line_count, -- eg_command( end_command, type )) ; -+ printf("\"%s\", line %d: \"", -+ file_name, -+ line_count); -+ print_eg_command(end_command, type); -+ printf("\" found at top level\n"); - ++warn_count; - return(0); - } diff --git a/Build/source/texk/lacheck/lacheck-1.26/Makefile b/Build/source/texk/lacheck/lacheck-1.26/Makefile deleted file mode 100644 index a7e2b5aeee0..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/Makefile +++ /dev/null @@ -1,97 +0,0 @@ -# Makefile for lacheck. - -# If both flex lacheck.c are missing, copy lacheck.noflex.c to -# lacheck.c. - -prefix = /usr/local -exec_prefix = $(prefix) - -bindir = $(exec_prefix)/bin -mandir = $(prefix)/man/man1 -manext = .1 -srcdir = . - -# Use `cc -bsd' on a next -# use `cc -cckr' on a sgi -# CC = gcc -traditional -CC=cc - -CFLAGS = -g # -O -DNEED_STRSTR - -# No changes should be needed below - -# Remember to change when lacheck is updated. -REV = 1.26 - -DISTFILES = lacheck.lex lacheck.man Makefile lacheck.c test.tex test.old \ - lacheck.hlp make_vms.com - -FTPDIR = /home/ftp/pub/Staff/Per.Abrahamsen/mirror/ftp/lacheck - -SHELL = /bin/sh - -LACHECK=lacheck - -INSTALL = cp -INSTALL_PROGRAM = $(INSTALL) -INSTALL_DATA = $(INSTALL) - -FLEX = flex -FLEXFLAGS = -8 - -LIBS= #-ll - -$(LACHECK): lacheck.o - $(CC) $(CFLAGS) -o $@ $(srcdir)/lacheck.o $(LIBS) - -lacheck.c: lacheck.lex - -if [ ! -f $(srcdir)/lacheck.noflex.c ] ; then \ - if [ -f $(srcdir)/lacheck.c ] ; then \ - $(INSTALL_DATA) $(srcdir)/lacheck.c $(srcdir)/lacheck.noflex.c ; \ - fi ; \ - fi - $(FLEX) $(FLEXFLAGS) $(srcdir)/lacheck.lex - mv $(srcdir)/lex.yy.c $@ - -lacheck.1: lacheck.man - -sed -e "s!%%LACHECKREV%%!Release $(REV)!" $(srcdir)/lacheck.man |\ - sed -e "s!%%LACHECKDATE%%!`date +%D`!" |\ - sed -e "s!%%LACHECKPATH%%!$(bindir)/$(LACHECK)!" > $@ - -test.new: test.tex $(LACHECK) - $(srcdir)/$(LACHECK) $(srcdir)/test.tex > $@ - -test.old: test.tex $(LACHECK) - $(srcdir)/$(LACHECK) $(srcdir)/test.tex > $@ - -check: test.new - -diff $(srcdir)/test.old $(srcdir)/test.new - -install: $(LACHECK) lacheck.1 - cp $(srcdir)/$(LACHECK) $(bindir) - cp $(srcdir)/lacheck.1 $(mandir)/lacheck$(manext) - -uninstall: - -rm -f $(bindir)/$(LACHECK) $(mandir)/lacheck$(manext) - -clean: - -rm -f $(srcdir)/$(LACHECK) $(srcdir)/*.o $(srcdir)/*.1 $(srcdir)/*~ - -distclean: clean - -mostlyclean: clean - -rm -f $(srcdir)/lacheck.c $(srcdir)/lacheck.noflex.c - -realclean: mostlyclean - -rm -f test.old - -dist: $(DISTFILES) - mkdir lacheck-$(REV) - cp $(DISTFILES) lacheck-$(REV) - touch lacheck-$(REV)/lacheck.c - -rm -f $(FTPDIR)/lacheck-$(REV).tar.gz - -rm -f $(FTPDIR)/lacheck.tar.gz $(FTPDIR)/lacheck.tar.Z - tar -cf - lacheck-$(REV) | gzip > $(FTPDIR)/lacheck-$(REV).tar.gz - tar -cf - lacheck-$(REV) | compress > $(FTPDIR)/lacheck-$(REV).tar.Z - (cd $(FTPDIR); ln -s lacheck-$(REV).tar.gz lacheck.tar.gz) - diff --git a/Build/source/texk/lacheck/lacheck-1.26/lacheck.c b/Build/source/texk/lacheck/lacheck-1.26/lacheck.c deleted file mode 100644 index 454341bf8d4..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/lacheck.c +++ /dev/null @@ -1,4699 +0,0 @@ - -#line 3 "lacheck.c" - -#define YY_INT_ALIGNED short int - -/* A lexical scanner generated by flex */ - -#define FLEX_SCANNER -#define YY_FLEX_MAJOR_VERSION 2 -#define YY_FLEX_MINOR_VERSION 5 -#define YY_FLEX_SUBMINOR_VERSION 39 -#if YY_FLEX_SUBMINOR_VERSION > 0 -#define FLEX_BETA -#endif - -/* First, we deal with platform-specific or compiler-specific issues. */ - -/* begin standard C headers. */ -#include -#include -#include -#include - -/* end standard C headers. */ - -/* flex integer type definitions */ - -#ifndef FLEXINT_H -#define FLEXINT_H - -/* C99 systems have . Non-C99 systems may or may not. */ - -#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L - -/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, - * if you want the limit (max/min) macros for int types. - */ -#ifndef __STDC_LIMIT_MACROS -#define __STDC_LIMIT_MACROS 1 -#endif - -#include -typedef int8_t flex_int8_t; -typedef uint8_t flex_uint8_t; -typedef int16_t flex_int16_t; -typedef uint16_t flex_uint16_t; -typedef int32_t flex_int32_t; -typedef uint32_t flex_uint32_t; -#else -typedef signed char flex_int8_t; -typedef short int flex_int16_t; -typedef int flex_int32_t; -typedef unsigned char flex_uint8_t; -typedef unsigned short int flex_uint16_t; -typedef unsigned int flex_uint32_t; - -/* Limits of integral types. */ -#ifndef INT8_MIN -#define INT8_MIN (-128) -#endif -#ifndef INT16_MIN -#define INT16_MIN (-32767-1) -#endif -#ifndef INT32_MIN -#define INT32_MIN (-2147483647-1) -#endif -#ifndef INT8_MAX -#define INT8_MAX (127) -#endif -#ifndef INT16_MAX -#define INT16_MAX (32767) -#endif -#ifndef INT32_MAX -#define INT32_MAX (2147483647) -#endif -#ifndef UINT8_MAX -#define UINT8_MAX (255U) -#endif -#ifndef UINT16_MAX -#define UINT16_MAX (65535U) -#endif -#ifndef UINT32_MAX -#define UINT32_MAX (4294967295U) -#endif - -#endif /* ! C99 */ - -#endif /* ! FLEXINT_H */ - -#ifdef __cplusplus - -/* The "const" storage-class-modifier is valid. */ -#define YY_USE_CONST - -#else /* ! __cplusplus */ - -/* C99 requires __STDC__ to be defined as 1. */ -#if defined (__STDC__) - -#define YY_USE_CONST - -#endif /* defined (__STDC__) */ -#endif /* ! __cplusplus */ - -#ifdef YY_USE_CONST -#define yyconst const -#else -#define yyconst -#endif - -/* Returned upon end-of-file. */ -#define YY_NULL 0 - -/* Promotes a possibly negative, possibly signed char to an unsigned - * integer for use as an array index. If the signed char is negative, - * we want to instead treat it as an 8-bit unsigned char, hence the - * double cast. - */ -#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) - -/* Enter a start condition. This macro really ought to take a parameter, - * but we do it the disgusting crufty way forced on us by the ()-less - * definition of BEGIN. - */ -#define BEGIN (yy_start) = 1 + 2 * - -/* Translate the current start state into a value that can be later handed - * to BEGIN to return to the state. The YYSTATE alias is for lex - * compatibility. - */ -#define YY_START (((yy_start) - 1) / 2) -#define YYSTATE YY_START - -/* Action number for EOF rule of a given start state. */ -#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) - -/* Special action meaning "start processing a new file". */ -#define YY_NEW_FILE yyrestart(yyin ) - -#define YY_END_OF_BUFFER_CHAR 0 - -/* Size of default input buffer. */ -#ifndef YY_BUF_SIZE -#define YY_BUF_SIZE 16384 -#endif - -/* The state buf must be large enough to hold one state per character in the main buffer. - */ -#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) - -#ifndef YY_TYPEDEF_YY_BUFFER_STATE -#define YY_TYPEDEF_YY_BUFFER_STATE -typedef struct yy_buffer_state *YY_BUFFER_STATE; -#endif - -#ifndef YY_TYPEDEF_YY_SIZE_T -#define YY_TYPEDEF_YY_SIZE_T -typedef size_t yy_size_t; -#endif - -extern yy_size_t yyleng; - -extern FILE *yyin, *yyout; - -#define EOB_ACT_CONTINUE_SCAN 0 -#define EOB_ACT_END_OF_FILE 1 -#define EOB_ACT_LAST_MATCH 2 - - #define YY_LESS_LINENO(n) - #define YY_LINENO_REWIND_TO(ptr) - -/* Return all but the first "n" matched characters back to the input stream. */ -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - *yy_cp = (yy_hold_char); \ - YY_RESTORE_YY_MORE_OFFSET \ - (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ - YY_DO_BEFORE_ACTION; /* set up yytext again */ \ - } \ - while ( 0 ) - -#define unput(c) yyunput( c, (yytext_ptr) ) - -#ifndef YY_STRUCT_YY_BUFFER_STATE -#define YY_STRUCT_YY_BUFFER_STATE -struct yy_buffer_state - { - FILE *yy_input_file; - - char *yy_ch_buf; /* input buffer */ - char *yy_buf_pos; /* current position in input buffer */ - - /* Size of input buffer in bytes, not including room for EOB - * characters. - */ - yy_size_t yy_buf_size; - - /* Number of characters read into yy_ch_buf, not including EOB - * characters. - */ - yy_size_t yy_n_chars; - - /* Whether we "own" the buffer - i.e., we know we created it, - * and can realloc() it to grow it, and should free() it to - * delete it. - */ - int yy_is_our_buffer; - - /* Whether this is an "interactive" input source; if so, and - * if we're using stdio for input, then we want to use getc() - * instead of fread(), to make sure we stop fetching input after - * each newline. - */ - int yy_is_interactive; - - /* Whether we're considered to be at the beginning of a line. - * If so, '^' rules will be active on the next match, otherwise - * not. - */ - int yy_at_bol; - - int yy_bs_lineno; /**< The line count. */ - int yy_bs_column; /**< The column count. */ - - /* Whether to try to fill the input buffer when we reach the - * end of it. - */ - int yy_fill_buffer; - - int yy_buffer_status; - -#define YY_BUFFER_NEW 0 -#define YY_BUFFER_NORMAL 1 - /* When an EOF's been seen but there's still some text to process - * then we mark the buffer as YY_EOF_PENDING, to indicate that we - * shouldn't try reading from the input source any more. We might - * still have a bunch of tokens to match, though, because of - * possible backing-up. - * - * When we actually see the EOF, we change the status to "new" - * (via yyrestart()), so that the user can continue scanning by - * just pointing yyin at a new input file. - */ -#define YY_BUFFER_EOF_PENDING 2 - - }; -#endif /* !YY_STRUCT_YY_BUFFER_STATE */ - -/* Stack of input buffers. */ -static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ -static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ -static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ - -/* We provide macros for accessing buffer states in case in the - * future we want to put the buffer states in a more general - * "scanner state". - * - * Returns the top of the stack, or NULL. - */ -#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ - ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ - : NULL) - -/* Same as previous macro, but useful when we know that the buffer stack is not - * NULL or when we need an lvalue. For internal use only. - */ -#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] - -/* yy_hold_char holds the character lost when yytext is formed. */ -static char yy_hold_char; -static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ -yy_size_t yyleng; - -/* Points to current character in buffer. */ -static char *yy_c_buf_p = (char *) 0; -static int yy_init = 0; /* whether we need to initialize */ -static int yy_start = 0; /* start state number */ - -/* Flag which is used to allow yywrap()'s to do buffer switches - * instead of setting up a fresh yyin. A bit of a hack ... - */ -static int yy_did_buffer_switch_on_eof; - -void yyrestart (FILE *input_file ); -void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); -YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); -void yy_delete_buffer (YY_BUFFER_STATE b ); -void yy_flush_buffer (YY_BUFFER_STATE b ); -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); -void yypop_buffer_state (void ); - -static void yyensure_buffer_stack (void ); -static void yy_load_buffer_state (void ); -static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); - -#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) - -YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); -YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); -YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); - -void *yyalloc (yy_size_t ); -void *yyrealloc (void *,yy_size_t ); -void yyfree (void * ); - -#define yy_new_buffer yy_create_buffer - -#define yy_set_interactive(is_interactive) \ - { \ - if ( ! YY_CURRENT_BUFFER ){ \ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ - } - -#define yy_set_bol(at_bol) \ - { \ - if ( ! YY_CURRENT_BUFFER ){\ - yyensure_buffer_stack (); \ - YY_CURRENT_BUFFER_LVALUE = \ - yy_create_buffer(yyin,YY_BUF_SIZE ); \ - } \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ - } - -#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) - -/* Begin user sect3 */ - -typedef unsigned char YY_CHAR; - -FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; - -typedef int yy_state_type; - -extern int yylineno; - -int yylineno = 1; - -extern char *yytext; -#define yytext_ptr yytext - -static yy_state_type yy_get_previous_state (void ); -static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); -static int yy_get_next_buffer (void ); -static void yy_fatal_error (yyconst char msg[] ); - -/* Done after the current pattern has been matched and before the - * corresponding action - sets up yytext. - */ -#define YY_DO_BEFORE_ACTION \ - (yytext_ptr) = yy_bp; \ - yyleng = (size_t) (yy_cp - yy_bp); \ - (yy_hold_char) = *yy_cp; \ - *yy_cp = '\0'; \ - (yy_c_buf_p) = yy_cp; - -#define YY_NUM_RULES 88 -#define YY_END_OF_BUFFER 89 -/* This struct is not used in this scanner, - but its presence is necessary. */ -struct yy_trans_info - { - flex_int32_t yy_verify; - flex_int32_t yy_nxt; - }; -static yyconst flex_int16_t yy_acclist[361] = - { 0, - 89, 87, 88, 87, 88, 4, 88, 87, 88, 43, - 87, 88, 81, 87, 88, 87, 88, 87, 88, 87, - 88, 87, 88, 87, 88, 9, 87, 88, 10, 87, - 88, 87, 88, 87, 88, 87, 88, 87, 88, 87, - 88, 87, 88, 49, 88, 88, 49, 88, 59, 88, - 59, 88, 52, 88, 51, 52, 88, 53, 88, 52, - 88, 85, 88, 85, 88, 88, 83, 88, 82, 88, - 83, 88, 56, 88, 55, 88, 56, 88, 31, 88, - 4, 88, 31, 88, 31, 88, 29, 31, 88, 30, - 31, 88, 41, 88, 40, 41, 88, 41, 88, 35, - - 88, 35, 88, 35, 88, 33, 35, 88, 34, 35, - 88, 27, 88, 25, 27, 88, 4, 25, 88, 13, - 27, 88, 27, 88, 13, 27, 88, 24, 27, 88, - 24, 27, 88, 13, 27, 88, 27, 88, 13, 27, - 88, 9, 27, 88, 11, 27, 88, 26, 27, 88, - 12, 27, 88, 12, 27, 88, 27, 88, 27, 88, - 12, 27, 88, 27, 88, 12, 27, 88, 10, 27, - 88, 80, 63, 42, 44, 3, 79, 7, 2, 36, - 37, 17, 38, 1, 39, 5, 6,16445, 8, 63, - 79,16445, 49, 1, 49, 59, 1, 59, 1, 85, - - 1, 85, 80, 13, 13, 13, 79, 13, 18, 13, - 12, 12, 12, 16, 12, 78,16444, 3, 66, 68, - 16446,16445, 77, 77, 77, 14, 68,16446,16445, 78, - 16444, 13,16446, 12,16446,16460,16460, 15,16444, 3, - 3,16460,16460, 77, 77, 73, 73, 77, 22, 22, - 77, 19, 19, 77, 8253, 25,16444, 23, 67, 67, - 8268, 67, 67, 8252, 67, 3, 67, 8268, 8254, 28, - 28, 77, 28, 58, 57, 8, 63, 67, 67, 67, - 67, 71, 3, 3, 67, 28, 77, 28, 77, 74, - 74, 74, 77, 74, 74, 54, 54, 54, 77, 54, - - 67, 67, 67, 70, 3, 67, 3, 48, 47, 9, - 10, 84, 74, 75, 75, 75, 77, 75, 75, 67, - 29, 30, 33, 34, 9, 11, 10, 3, 64, 75, - 3, 69, 65, 65, 65, 3, 65, 46, 46, 77, - 86, 77, 86, 65, 72, 3, 65, 65, 65, 3, - 45, 45, 77, 3, 20, 20, 77, 21, 50, 32 - } ; - -static yyconst flex_int16_t yy_accept[954] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 2, 4, 6, - 8, 10, 13, 16, 18, 20, 22, 24, 26, 29, - 32, 34, 36, 38, 40, 42, 44, 46, 47, 49, - 51, 53, 55, 58, 60, 62, 64, 66, 67, 69, - 71, 73, 75, 77, 79, 81, 83, 85, 87, 90, - 93, 95, 98, 100, 102, 104, 106, 109, 112, 114, - 117, 120, 123, 125, 128, 131, 134, 137, 139, 142, - 145, 148, 151, 154, 157, 159, 161, 164, 166, 169, - - 172, 172, 172, 172, 172, 173, 173, 173, 173, 173, - 173, 173, 173, 174, 174, 174, 175, 175, 176, 176, - 177, 177, 177, 177, 177, 177, 177, 177, 178, 178, - 179, 180, 181, 182, 183, 183, 183, 184, 185, 186, - 186, 186, 186, 186, 186, 186, 186, 186, 186, 186, - 186, 186, 186, 186, 186, 186, 187, 188, 189, 189, - 190, 191, 191, 191, 191, 191, 191, 191, 191, 191, - 192, 192, 193, 193, 194, 196, 197, 199, 200, 200, - 201, 203, 203, 203, 203, 203, 204, 204, 204, 204, - 204, 205, 206, 208, 209, 210, 210, 210, 210, 210, - - 210, 210, 210, 211, 212, 213, 214, 215, 215, 215, - 216, 216, 216, 216, 216, 216, 216, 216, 216, 216, - 216, 216, 216, 216, 216, 216, 217, 217, 217, 217, - 217, 217, 217, 217, 217, 217, 218, 218, 218, 218, - 219, 219, 219, 219, 219, 219, 219, 219, 219, 219, - 219, 219, 219, 219, 219, 220, 220, 220, 220, 221, - 222, 223, 224, 225, 226, 226, 226, 226, 226, 226, - 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, - 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, - 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, - - 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, - 226, 227, 228, 229, 230, 230, 230, 230, 230, 230, - 230, 230, 230, 230, 230, 231, 231, 231, 231, 232, - 234, 234, 234, 234, 234, 234, 234, 234, 234, 236, - 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, - 236, 237, 238, 238, 238, 238, 238, 239, 239, 239, - 239, 239, 239, 239, 239, 240, 240, 240, 240, 240, - 240, 240, 240, 241, 241, 241, 241, 242, 242, 242, - 242, 242, 243, 244, 244, 244, 244, 244, 244, 244, - 244, 244, 244, 244, 244, 244, 244, 244, 245, 246, - - 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, - 247, 249, 249, 249, 249, 249, 249, 249, 249, 249, - 250, 252, 252, 252, 252, 252, 252, 252, 252, 253, - 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, - 255, 255, 255, 255, 255, 256, 256, 256, 256, 256, - 256, 256, 256, 256, 256, 256, 256, 256, 256, 256, - 256, 256, 256, 256, 256, 256, 256, 256, 256, 257, - 258, 258, 258, 258, 258, 259, 259, 259, 259, 259, - 259, 259, 259, 259, 259, 260, 260, 260, 261, 261, - 261, 261, 262, 262, 262, 262, 262, 262, 262, 262, - - 262, 262, 262, 262, 263, 264, 264, 264, 264, 264, - 264, 265, 265, 265, 265, 265, 265, 266, 266, 267, - 267, 268, 268, 268, 268, 269, 269, 269, 269, 269, - 269, 269, 269, 269, 269, 269, 269, 269, 269, 269, - 270, 270, 270, 270, 270, 270, 270, 270, 270, 270, - 270, 270, 270, 271, 273, 274, 274, 274, 274, 274, - 274, 275, 275, 275, 275, 276, 276, 276, 276, 276, - 276, 276, 276, 276, 276, 276, 276, 276, 276, 276, - 276, 276, 276, 276, 277, 278, 278, 278, 278, 278, - 278, 278, 278, 279, 280, 280, 280, 280, 280, 280, - - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 281, 281, 281, 281, 281, 281, 281, 281, 281, 281, - 281, 281, 282, 282, 283, 283, 283, 283, 283, 284, - 285, 285, 285, 286, 286, 286, 286, 286, 286, 286, - 286, 286, 286, 286, 286, 286, 286, 286, 286, 286, - 286, 286, 286, 286, 288, 290, 290, 290, 290, 290, - 290, 290, 290, 290, 290, 290, 290, 291, 292, 292, - 294, 295, 296, 296, 296, 296, 296, 296, 296, 296, - 297, 298, 300, 301, 301, 301, 301, 301, 301, 301, - - 302, 302, 302, 302, 302, 302, 302, 302, 302, 302, - 302, 302, 302, 302, 302, 302, 302, 303, 303, 303, - 303, 303, 303, 303, 304, 304, 304, 305, 306, 306, - 307, 308, 308, 308, 308, 308, 308, 308, 308, 308, - 308, 308, 309, 309, 309, 310, 311, 311, 311, 311, - 311, 311, 311, 311, 312, 312, 312, 312, 312, 313, - 313, 314, 314, 314, 314, 314, 315, 316, 316, 318, - 319, 320, 320, 320, 320, 321, 321, 321, 322, 323, - 324, 325, 326, 327, 327, 328, 328, 328, 328, 328, - 328, 328, 328, 329, 329, 329, 329, 329, 329, 330, - - 330, 330, 330, 330, 330, 330, 330, 330, 330, 330, - 330, 330, 330, 330, 330, 331, 331, 331, 331, 331, - 331, 331, 331, 331, 331, 331, 331, 331, 331, 332, - 332, 332, 332, 332, 332, 332, 332, 332, 332, 332, - 332, 332, 332, 332, 333, 333, 333, 333, 333, 333, - 333, 333, 333, 334, 334, 334, 335, 335, 335, 335, - 335, 336, 336, 337, 337, 338, 338, 338, 338, 338, - 338, 338, 338, 338, 338, 338, 338, 339, 341, 342, - 344, 344, 344, 344, 344, 344, 344, 344, 344, 344, - 344, 345, 345, 345, 346, 347, 347, 347, 348, 348, - - 348, 348, 348, 348, 348, 348, 348, 348, 348, 348, - 348, 348, 348, 348, 348, 349, 349, 349, 349, 349, - 350, 351, 351, 351, 351, 351, 351, 351, 352, 354, - 354, 354, 354, 354, 354, 354, 354, 355, 355, 355, - 355, 356, 358, 358, 359, 359, 360, 360, 360, 360, - 360, 361, 361 - } ; - -static yyconst flex_int32_t yy_ec[256] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 4, 5, 6, 6, 7, 8, 6, 9, 10, - 11, 12, 13, 14, 15, 16, 17, 18, 18, 18, - 18, 18, 18, 18, 18, 18, 18, 19, 20, 6, - 6, 6, 21, 22, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 24, 25, 26, 6, 1, 27, 28, 29, 30, 31, - - 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, - 42, 43, 37, 44, 45, 46, 47, 48, 49, 50, - 51, 37, 52, 1, 53, 54, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 55, 55, 1, 1, - - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 55, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 56, 56, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 56, 1, 1, - 1, 1, 1, 1, 1 - } ; - -static yyconst flex_int32_t yy_meta[57] = - { 0, - 1, 2, 3, 2, 4, 1, 5, 6, 7, 8, - 8, 1, 1, 9, 1, 10, 1, 8, 8, 8, - 11, 12, 13, 1, 14, 1, 15, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, - 16, 17, 18, 19, 20, 21 - } ; - -static yyconst flex_int16_t yy_base[1045] = - { 0, - 0, 56, 110, 111, 112, 113, 115, 117, 118, 119, - 5108, 5107, 120, 121, 122, 123, 124, 126, 134, 136, - 150, 159, 212, 0, 268, 0, 5131, 155, 323, 179, - 179, 180, 171, 378, 181, 361, 410, 373, 187, 184, - 462, 405, 465, 478, 515, 360, 0, 5134, 5105, 0, - 5104, 5134, 5134, 5134, 167, 0, 5103, 5102, 5134, 5134, - 5101, 5134, 5134, 5100, 5134, 5134, 5121, 470, 5134, 5134, - 5134, 5134, 5098, 5134, 5119, 475, 5134, 5134, 315, 570, - 624, 388, 472, 397, 322, 569, 675, 714, 758, 507, - 324, 585, 463, 583, 589, 593, 809, 373, 860, 385, - - 618, 612, 660, 667, 657, 0, 914, 688, 701, 940, - 968, 5105, 5134, 704, 719, 5134, 571, 5134, 5113, 5134, - 712, 1012, 784, 745, 779, 5086, 817, 5134, 596, 5134, - 5134, 5134, 5134, 5134, 5072, 5069, 5134, 814, 5134, 462, - 474, 853, 545, 860, 384, 688, 109, 491, 369, 645, - 711, 134, 570, 401, 719, 5134, 5134, 801, 891, 5065, - 5062, 987, 865, 901, 1018, 5001, 414, 1035, 796, 1043, - 897, 1067, 838, 0, 0, 0, 0, 5134, 4956, 0, - 0, 4934, 4931, 4900, 4879, 5134, 0, 4883, 619, 729, - 766, 1114, 782, 823, 5134, 4840, 596, 4762, 4774, 4703, - - 462, 4684, 837, 801, 1115, 913, 5134, 597, 4671, 939, - 1059, 1130, 1010, 4649, 4621, 4594, 4587, 4535, 4487, 4485, - 4447, 0, 1139, 4455, 4448, 1169, 1150, 1196, 1209, 1249, - 4414, 4393, 4346, 128, 559, 990, 1304, 4323, 1230, 1311, - 1189, 1314, 536, 170, 468, 509, 382, 694, 390, 565, - 786, 0, 1143, 1335, 5134, 1326, 1241, 4290, 5134, 1003, - 1062, 4298, 4297, 4296, 624, 467, 677, 753, 452, 696, - 714, 803, 1102, 1372, 632, 808, 1128, 313, 813, 1428, - 734, 914, 880, 784, 909, 1194, 1484, 178, 749, 601, - 855, 1145, 926, 976, 989, 996, 1104, 1051, 1238, 1299, - - 980, 1300, 0, 0, 1016, 0, 4299, 1539, 1564, 1532, - 5134, 1571, 1580, 1590, 1596, 1599, 1623, 4298, 4282, 4268, - 4267, 4266, 4265, 4305, 4297, 1070, 1308, 1540, 1673, 1606, - 4261, 4256, 0, 0, 4270, 4254, 4265, 4243, 1678, 4242, - 0, 4220, 1066, 0, 4229, 1685, 1698, 1333, 1702, 4191, - 1269, 1634, 4183, 4167, 4190, 0, 5134, 1727, 1717, 0, - 1736, 1743, 1781, 1345, 1751, 4148, 4139, 4141, 1761, 1806, - 4122, 1796, 1211, 4150, 1192, 1814, 1822, 1776, 1824, 1846, - 906, 1768, 1771, 1204, 1077, 0, 4113, 4147, 1682, 0, - 1850, 4118, 87, 4072, 4045, 1853, 1711, 4044, 4039, 558, - - 1234, 1129, 844, 1288, 1164, 1310, 1313, 1105, 1300, 5134, - 4038, 1547, 1329, 1908, 1523, 1522, 1179, 1242, 1139, 5134, - 4037, 1963, 1536, 1584, 1589, 1597, 867, 1032, 5134, 4035, - 1528, 1601, 1694, 1669, 1608, 1661, 1719, 1195, 1592, 1662, - 1727, 1225, 1367, 1856, 5134, 1864, 1856, 4053, 4050, 4024, - 4048, 1878, 0, 1881, 1966, 2015, 1882, 1979, 2040, 1986, - 2047, 2050, 4034, 1809, 4006, 4005, 4004, 4003, 2094, 1888, - 2058, 2076, 4002, 4001, 5134, 4010, 4001, 4010, 4010, 3996, - 3997, 0, 3986, 3950, 5134, 1879, 3913, 3912, 1973, 3883, - 2004, 5134, 3887, 3882, 2084, 3917, 2104, 1951, 0, 1681, - - 3916, 2119, 3901, 2010, 2022, 3868, 0, 3883, 2126, 2133, - 5134, 2151, 3878, 3907, 1799, 3905, 3904, 2056, 1978, 1748, - 1874, 2136, 2004, 2143, 3903, 963, 1797, 3902, 2161, 0, - 1963, 3901, 3842, 3840, 3842, 3837, 3829, 2164, 2148, 5134, - 2158, 1745, 1810, 1823, 1998, 1695, 2176, 1847, 1875, 2219, - 1769, 1938, 2254, 2284, 0, 2035, 2049, 1979, 2069, 2334, - 5134, 3871, 1797, 2052, 5134, 2096, 2063, 2109, 1824, 2072, - 2386, 2148, 2091, 2054, 2151, 2152, 2092, 2150, 2153, 2160, - 2442, 1957, 2204, 3864, 3863, 3840, 2337, 0, 2172, 3866, - 2344, 3854, 2347, 2353, 2497, 2500, 2507, 2510, 2307, 3819, - - 3819, 3818, 3817, 3812, 2525, 2534, 2541, 3811, 3810, 3813, - 3818, 3813, 2545, 3776, 3790, 3814, 2595, 3802, 3808, 3802, - 3758, 3751, 3769, 2598, 3764, 3748, 3787, 2605, 2614, 3775, - 3783, 3782, 3743, 5134, 3748, 2623, 0, 3776, 2630, 3764, - 2180, 3773, 3770, 2154, 2504, 2181, 2345, 3769, 2639, 3725, - 3721, 3727, 3730, 3716, 2517, 2169, 2654, 2321, 2343, 2182, - 2341, 3729, 2344, 0, 0, 2349, 3724, 2353, 2504, 3750, - 2512, 2517, 2351, 2526, 2647, 2166, 5134, 2699, 0, 3727, - 3726, 2657, 2484, 1852, 2519, 2509, 2524, 2750, 2664, 5134, - 3732, 3721, 3720, 3705, 3732, 2669, 2676, 3717, 3722, 3721, - - 2805, 3690, 3676, 3672, 3669, 3662, 2689, 3647, 3641, 3617, - 3624, 2808, 3605, 3604, 2545, 3639, 3638, 2700, 3591, 3590, - 3584, 2813, 3619, 3618, 2816, 3574, 5134, 2628, 3612, 3611, - 2823, 2560, 2341, 1719, 2824, 3335, 3347, 3333, 2832, 2582, - 2848, 5134, 3374, 2593, 5134, 3354, 2597, 2346, 2659, 2588, - 2618, 2673, 2687, 3353, 2623, 2665, 2188, 2688, 5134, 2899, - 0, 2676, 2818, 2801, 2820, 5134, 2946, 0, 3352, 3351, - 2861, 3327, 2868, 3368, 3367, 2871, 3325, 5134, 5134, 5134, - 5134, 5134, 5134, 3323, 5134, 3322, 2688, 2879, 3321, 3320, - 2906, 3318, 2836, 2888, 2672, 2840, 3318, 2913, 5134, 2904, - - 3359, 2641, 2831, 2693, 2845, 2837, 2873, 2865, 2996, 3308, - 3357, 2189, 2900, 2689, 0, 3316, 2933, 3328, 3258, 3257, - 3276, 3003, 2913, 3250, 3237, 3167, 2885, 3010, 3017, 2945, - 2276, 1870, 2932, 0, 3030, 3166, 2169, 3160, 2908, 3055, - 3111, 2903, 3134, 5134, 0, 2921, 2930, 2543, 3182, 3153, - 3024, 3023, 5134, 3002, 3033, 3032, 3166, 2994, 2942, 0, - 2891, 3168, 3015, 2953, 2957, 3170, 1323, 2998, 0, 3007, - 2855, 2772, 2684, 2638, 2584, 2846, 5134, 2590, 5134, 2542, - 2941, 3008, 3000, 2993, 0, 2471, 2473, 2402, 2370, 2277, - 2275, 2107, 2099, 5134, 2024, 3172, 1971, 1969, 2819, 2030, - - 1839, 3175, 1714, 1598, 1589, 1529, 3200, 3235, 3158, 3022, - 1523, 1525, 1334, 1308, 1228, 3256, 1128, 1112, 1046, 999, - 3259, 2278, 3262, 3258, 895, 817, 687, 5134, 679, 3162, - 3294, 615, 0, 0, 3260, 485, 3261, 2894, 428, 3248, - 5134, 308, 155, 5134, 2920, 5134, 3329, 0, 75, 0, - 0, 5134, 3381, 3402, 3423, 3444, 3465, 3486, 3507, 3528, - 3549, 3570, 3591, 3604, 3624, 3645, 3666, 3687, 3707, 3725, - 3743, 3761, 3779, 3799, 3820, 3840, 3262, 3264, 3860, 3881, - 3896, 3908, 3929, 3950, 3971, 3992, 4013, 3275, 4033, 4042, - 4063, 4084, 4105, 4126, 4135, 4156, 4177, 4198, 4219, 4240, - - 4261, 4281, 4301, 4322, 4343, 4364, 4385, 3340, 4406, 4427, - 4448, 4469, 4490, 4511, 4532, 4553, 4574, 4595, 4616, 4637, - 4658, 4679, 4700, 4721, 3342, 4742, 4763, 4784, 4805, 4826, - 4847, 4868, 4889, 4910, 4931, 4952, 4973, 4994, 5015, 5036, - 5057, 5078, 3176, 5099 - } ; - -static yyconst flex_int16_t yy_def[1045] = - { 0, - 952, 952, 953, 953, 954, 954, 955, 955, 956, 956, - 957, 957, 958, 958, 959, 959, 960, 960, 961, 961, - 962, 962, 952, 23, 952, 25, 952, 952, 952, 29, - 952, 952, 963, 952, 952, 964, 952, 964, 952, 952, - 952, 965, 965, 965, 952, 45, 966, 952, 966, 967, - 967, 952, 952, 952, 952, 968, 968, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 963, 952, 952, 952, - 952, 952, 952, 952, 963, 952, 952, 952, 952, 969, - 969, 970, 963, 970, 952, 952, 971, 952, 971, 952, - 952, 952, 972, 972, 952, 952, 973, 88, 973, 952, - - 952, 952, 952, 952, 974, 975, 976, 974, 974, 952, - 952, 110, 952, 952, 952, 952, 111, 952, 963, 952, - 963, 963, 952, 952, 117, 952, 964, 952, 127, 952, - 952, 952, 952, 952, 977, 978, 952, 952, 952, 978, - 978, 978, 978, 978, 978, 978, 978, 978, 978, 978, - 978, 978, 978, 978, 978, 952, 952, 979, 127, 952, - 952, 952, 952, 965, 965, 117, 117, 965, 45, 965, - 45, 952, 45, 966, 966, 967, 967, 952, 952, 968, - 968, 952, 952, 952, 952, 952, 980, 981, 982, 982, - 970, 89, 970, 89, 952, 952, 952, 952, 952, 952, - - 952, 952, 89, 972, 99, 99, 952, 952, 952, 99, - 952, 983, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 984, 952, 952, 952, 976, 952, 985, 952, 952, - 110, 110, 952, 952, 952, 230, 952, 952, 963, 952, - 986, 963, 963, 963, 963, 963, 963, 963, 963, 963, - 952, 987, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 988, 977, 988, 978, 978, 978, 978, 978, 978, - 978, 978, 978, 952, 978, 978, 978, 978, 978, 952, - 978, 978, 978, 978, 978, 978, 952, 978, 978, 978, - 978, 978, 978, 978, 978, 978, 978, 978, 989, 989, - - 990, 990, 991, 992, 952, 993, 952, 952, 994, 952, - 952, 965, 965, 965, 989, 989, 952, 317, 952, 952, - 952, 952, 952, 952, 981, 995, 982, 982, 995, 970, - 952, 952, 996, 997, 952, 952, 952, 952, 972, 952, - 998, 952, 952, 999, 952, 983, 983, 952, 952, 952, - 952, 952, 952, 952, 952, 1000, 952, 230, 952, 1001, - 983, 1002, 985, 952, 1002, 952, 952, 952, 1003, 1003, - 952, 963, 952, 1004, 963, 1005, 983, 1005, 963, 963, - 963, 963, 963, 963, 963, 1006, 952, 952, 952, 1007, - 952, 952, 952, 952, 952, 952, 952, 1008, 1008, 978, - - 978, 978, 978, 978, 978, 978, 978, 978, 978, 952, - 1008, 978, 978, 952, 978, 978, 978, 978, 978, 952, - 1008, 978, 978, 978, 978, 978, 978, 978, 952, 1008, - 978, 978, 978, 978, 978, 978, 978, 978, 978, 978, - 978, 978, 989, 989, 952, 989, 990, 952, 952, 952, - 952, 952, 1009, 983, 965, 994, 952, 952, 952, 989, - 989, 989, 317, 952, 952, 952, 952, 952, 995, 952, - 1003, 1003, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 1010, 952, 952, 952, 983, 1011, 952, 983, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 1012, 952, - - 952, 983, 1013, 1002, 1002, 952, 1014, 952, 1003, 1003, - 952, 1003, 952, 1015, 963, 963, 963, 1005, 983, 1016, - 963, 1005, 963, 963, 963, 963, 963, 952, 952, 1017, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 978, 978, 978, 978, 978, 978, 978, 978, 952, - 978, 978, 414, 414, 414, 978, 978, 978, 978, 952, - 952, 1018, 978, 978, 952, 978, 978, 978, 978, 978, - 952, 978, 978, 978, 978, 978, 978, 978, 978, 978, - 952, 978, 989, 952, 952, 952, 952, 1019, 952, 952, - 983, 1020, 965, 965, 952, 952, 952, 989, 952, 952, - - 952, 952, 952, 952, 1003, 1003, 1003, 952, 952, 952, - 952, 952, 581, 952, 952, 952, 952, 1021, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 1022, - 952, 952, 952, 952, 952, 1003, 1023, 963, 952, 952, - 1024, 963, 963, 963, 963, 963, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 978, 978, 978, 978, 978, - 978, 550, 978, 554, 554, 978, 550, 978, 978, 1018, - 978, 978, 978, 978, 978, 978, 952, 571, 678, 1025, - 978, 678, 978, 978, 978, 978, 978, 952, 978, 952, - 613, 1025, 978, 952, 952, 952, 952, 1026, 952, 952, - - 952, 952, 952, 952, 952, 952, 1003, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 983, 952, 952, - 952, 952, 952, 952, 983, 952, 952, 952, 963, 963, - 983, 963, 963, 963, 952, 952, 952, 952, 952, 978, - 952, 952, 1027, 978, 952, 978, 978, 978, 978, 978, - 978, 978, 978, 978, 978, 978, 978, 978, 952, 1028, - 1029, 978, 978, 978, 978, 952, 688, 767, 1025, 978, - 767, 952, 952, 952, 952, 983, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 983, 1030, 952, 952, - 983, 952, 983, 1031, 963, 963, 952, 952, 952, 952, - - 1027, 978, 978, 978, 978, 978, 978, 978, 1028, 1032, - 952, 978, 978, 978, 1033, 952, 983, 952, 952, 952, - 952, 1030, 952, 952, 952, 952, 963, 1031, 1030, 963, - 963, 963, 952, 1034, 952, 952, 952, 952, 978, 952, - 952, 978, 1032, 952, 678, 978, 978, 978, 952, 952, - 952, 952, 952, 1030, 1035, 952, 1030, 952, 952, 1036, - 963, 1031, 1030, 1037, 963, 1031, 963, 963, 1038, 952, - 952, 952, 952, 952, 952, 978, 952, 1025, 952, 1025, - 978, 978, 978, 978, 767, 952, 952, 952, 1039, 952, - 952, 952, 952, 952, 952, 1040, 963, 963, 963, 963, - - 952, 952, 952, 952, 952, 952, 952, 978, 978, 978, - 952, 952, 952, 952, 952, 1030, 952, 952, 963, 963, - 1030, 963, 963, 952, 952, 952, 952, 952, 1025, 978, - 952, 952, 1041, 1042, 1030, 952, 1030, 963, 952, 978, - 952, 1025, 952, 952, 978, 952, 978, 1043, 1043, 1044, - 1044, 0, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952 - } ; - -static yyconst flex_int16_t yy_nxt[5191] = - { 0, - 28, 29, 30, 29, 31, 28, 32, 33, 28, 28, - 28, 28, 34, 28, 34, 35, 28, 28, 28, 28, - 31, 28, 36, 28, 37, 28, 28, 38, 38, 38, - 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, - 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, - 38, 39, 40, 41, 36, 38, 28, 29, 30, 29, - 42, 28, 32, 33, 43, 43, 43, 28, 34, 43, - 34, 44, 28, 43, 43, 43, 42, 28, 45, 28, - 37, 28, 43, 46, 46, 46, 46, 46, 46, 46, - 46, 46, 46, 46, 46, 46, 46, 46, 46, 46, - - 46, 46, 46, 46, 46, 46, 46, 39, 40, 41, - 45, 46, 48, 48, 48, 48, 53, 54, 53, 54, - 48, 48, 60, 60, 63, 63, 66, 950, 66, 534, - 264, 67, 535, 67, 49, 49, 51, 51, 72, 55, - 72, 55, 57, 57, 61, 61, 64, 64, 68, 72, - 68, 72, 66, 285, 72, 264, 72, 75, 73, 367, - 73, 66, 48, 48, 48, 48, 75, 351, 101, 294, - 48, 48, 120, 120, 76, 69, 70, 69, 70, 102, - 114, 115, 114, 76, 121, 116, 118, 116, 160, 160, - 160, 178, 101, 101, 101, 122, 126, 101, 179, 264, - - 101, 77, 78, 117, 102, 117, 431, 946, 102, 382, - 77, 78, 79, 80, 81, 80, 82, 79, 79, 83, - 84, 84, 84, 79, 79, 85, 79, 86, 79, 84, - 84, 84, 82, 79, 87, 79, 88, 79, 84, 89, - 89, 89, 89, 89, 89, 89, 89, 89, 89, 89, - 89, 89, 89, 89, 89, 89, 89, 89, 89, 89, - 89, 89, 89, 90, 91, 92, 87, 89, 79, 80, - 81, 80, 93, 79, 79, 83, 79, 94, 94, 79, - 79, 79, 79, 95, 79, 94, 94, 94, 96, 79, - 97, 79, 98, 79, 79, 99, 99, 99, 99, 99, - - 99, 99, 99, 99, 99, 99, 99, 99, 99, 99, - 99, 99, 99, 99, 99, 99, 99, 99, 99, 90, - 100, 92, 97, 99, 103, 104, 103, 105, 101, 398, - 106, 107, 108, 108, 264, 101, 109, 101, 105, 102, - 108, 108, 108, 105, 418, 110, 102, 111, 102, 108, - 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, - 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, - 112, 112, 112, 112, 101, 172, 113, 110, 112, 123, - 123, 123, 173, 127, 120, 102, 101, 128, 158, 207, - 264, 101, 120, 124, 116, 159, 288, 102, 101, 128, - - 289, 101, 125, 952, 208, 264, 163, 163, 163, 102, - 101, 116, 117, 209, 173, 127, 130, 131, 165, 132, - 133, 102, 264, 385, 952, 283, 134, 159, 383, 166, - 311, 135, 136, 137, 138, 139, 296, 140, 141, 142, - 143, 144, 145, 146, 147, 148, 136, 136, 149, 136, - 150, 151, 136, 152, 153, 154, 136, 155, 136, 146, - 136, 156, 157, 161, 161, 161, 163, 163, 163, 116, - 120, 952, 799, 264, 120, 101, 101, 131, 165, 163, - 163, 163, 131, 264, 116, 121, 162, 117, 264, 167, - 265, 165, 266, 168, 178, 264, 122, 404, 182, 178, - - 334, 183, 166, 184, 337, 267, 185, 268, 160, 160, - 160, 120, 264, 383, 401, 113, 163, 163, 163, 164, - 101, 156, 157, 164, 164, 164, 156, 157, 165, 351, - 164, 286, 164, 164, 164, 164, 287, 169, 120, 167, - 384, 170, 171, 171, 171, 171, 171, 171, 171, 171, - 171, 171, 171, 171, 171, 171, 171, 171, 171, 171, - 171, 171, 171, 171, 171, 171, 264, 120, 382, 169, - 171, 103, 104, 103, 186, 116, 276, 187, 188, 264, - 277, 116, 101, 101, 126, 186, 161, 161, 161, 952, - 186, 264, 189, 117, 111, 116, 101, 352, 101, 116, - - 952, 368, 101, 952, 126, 542, 101, 102, 287, 162, - 382, 261, 295, 117, 219, 220, 952, 117, 159, 211, - 211, 211, 264, 113, 189, 114, 115, 114, 186, 332, - 340, 187, 188, 212, 326, 333, 341, 101, 113, 186, - 214, 327, 213, 215, 186, 264, 189, 216, 111, 433, - 159, 217, 218, 264, 943, 219, 220, 221, 223, 223, - 223, 103, 104, 103, 186, 400, 264, 222, 114, 115, - 114, 186, 413, 327, 222, 186, 290, 113, 189, 191, - 186, 224, 186, 191, 191, 191, 291, 186, 101, 223, - 223, 223, 191, 191, 191, 191, 120, 192, 264, 102, - - 398, 193, 227, 227, 227, 114, 115, 114, 186, 264, - 402, 222, 224, 239, 240, 239, 228, 264, 278, 186, - 237, 237, 237, 186, 186, 229, 222, 241, 284, 192, - 195, 799, 264, 382, 186, 264, 242, 405, 138, 186, - 264, 406, 196, 238, 329, 197, 254, 254, 254, 198, - 297, 327, 199, 292, 200, 264, 293, 255, 201, 255, - 124, 202, 191, 298, 422, 423, 191, 191, 191, 256, - 264, 101, 952, 158, 264, 191, 191, 191, 191, 952, - 203, 432, 102, 327, 193, 251, 251, 251, 952, 952, - 952, 252, 257, 386, 257, 952, 403, 257, 257, 124, - - 313, 124, 299, 300, 299, 264, 952, 952, 253, 164, - 387, 313, 203, 204, 952, 423, 313, 258, 204, 204, - 307, 260, 101, 301, 264, 952, 204, 204, 204, 264, - 952, 205, 260, 102, 264, 128, 952, 260, 261, 127, - 414, 952, 214, 128, 407, 215, 415, 952, 939, 216, - 952, 164, 952, 217, 218, 301, 419, 219, 220, 221, - 173, 952, 307, 205, 204, 264, 163, 163, 163, 204, - 204, 127, 306, 101, 264, 158, 264, 204, 204, 204, - 269, 264, 210, 270, 102, 545, 128, 271, 264, 307, - 278, 272, 173, 279, 273, 952, 274, 275, 434, 280, - - 281, 264, 163, 163, 163, 568, 952, 952, 120, 282, - 164, 952, 314, 159, 210, 223, 223, 223, 108, 173, - 425, 307, 107, 108, 108, 307, 952, 108, 261, 108, - 264, 108, 108, 108, 108, 264, 523, 952, 224, 799, - 108, 223, 223, 223, 108, 159, 426, 264, 108, 108, - 108, 173, 952, 108, 952, 230, 424, 108, 108, 108, - 108, 437, 231, 952, 224, 120, 108, 232, 232, 232, - 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, - 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, - 232, 369, 370, 369, 231, 232, 214, 264, 645, 215, - - 233, 937, 301, 216, 396, 397, 396, 217, 218, 438, - 264, 234, 235, 221, 120, 214, 439, 264, 215, 308, - 308, 308, 216, 349, 952, 349, 217, 218, 349, 349, - 219, 305, 221, 309, 301, 440, 163, 163, 163, 350, - 243, 952, 310, 244, 163, 163, 163, 245, 937, 952, - 312, 246, 247, 264, 352, 248, 249, 250, 450, 307, - 343, 343, 343, 299, 300, 299, 344, 307, 315, 316, - 315, 164, 264, 482, 212, 164, 164, 164, 569, 120, - 164, 212, 164, 213, 164, 164, 164, 164, 442, 317, - 483, 307, 189, 164, 318, 318, 318, 318, 318, 318, - - 318, 318, 318, 318, 318, 318, 318, 318, 318, 318, - 318, 318, 318, 318, 318, 318, 318, 318, 330, 339, - 527, 317, 318, 264, 189, 264, 264, 952, 952, 260, - 260, 346, 346, 346, 330, 260, 192, 205, 952, 952, - 223, 223, 223, 351, 408, 347, 356, 441, 409, 264, - 264, 359, 359, 359, 348, 550, 257, 360, 257, 936, - 264, 257, 257, 224, 544, 212, 264, 416, 192, 205, - 223, 223, 223, 108, 229, 417, 435, 108, 108, 108, - 559, 258, 108, 436, 108, 264, 108, 108, 108, 108, - 376, 377, 376, 224, 120, 108, 345, 361, 361, 361, - - 264, 345, 345, 345, 378, 517, 120, 345, 345, 547, - 345, 363, 345, 379, 558, 264, 264, 345, 482, 345, - 364, 345, 349, 427, 349, 357, 212, 349, 349, 578, - 935, 372, 373, 372, 526, 483, 428, 374, 350, 443, - 444, 443, 251, 251, 251, 241, 264, 345, 345, 345, - 223, 223, 223, 108, 242, 264, 124, 108, 108, 108, - 582, 543, 108, 264, 108, 253, 108, 108, 108, 108, - 491, 110, 491, 224, 414, 108, 112, 112, 112, 112, - 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, - 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, - - 446, 300, 446, 110, 112, 237, 237, 237, 186, 264, - 935, 222, 343, 343, 343, 158, 120, 546, 344, 186, - 492, 264, 301, 952, 186, 120, 212, 380, 238, 380, - 327, 264, 380, 380, 264, 213, 389, 389, 389, 391, - 551, 391, 390, 381, 391, 391, 489, 255, 489, 255, - 264, 489, 489, 548, 301, 392, 552, 549, 489, 256, - 489, 357, 327, 489, 489, 934, 899, 393, 443, 444, - 443, 394, 410, 410, 410, 410, 410, 410, 410, 410, - 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, - 410, 410, 410, 411, 136, 410, 410, 410, 410, 136, - - 136, 412, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 410, 410, 410, 410, 410, 420, 420, - 420, 420, 420, 420, 420, 420, 420, 420, 420, 420, - 420, 420, 420, 420, 420, 420, 420, 420, 420, 421, - 136, 420, 420, 420, 420, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 420, - 420, 420, 420, 420, 429, 429, 429, 429, 429, 429, - 429, 429, 429, 429, 429, 429, 429, 429, 429, 429, - - 429, 429, 429, 429, 429, 430, 136, 429, 429, 429, - 429, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 429, 429, 429, 429, 429, - 452, 452, 452, 264, 264, 349, 453, 349, 311, 264, - 349, 349, 556, 557, 212, 470, 933, 264, 932, 570, - 927, 350, 327, 310, 345, 454, 454, 454, 264, 345, - 345, 345, 163, 163, 163, 345, 345, 952, 345, 456, - 345, 458, 459, 458, 566, 345, 952, 345, 457, 345, - 550, 315, 316, 315, 327, 307, 952, 460, 461, 460, - - 462, 316, 462, 306, 307, 264, 306, 396, 397, 396, - 264, 567, 952, 264, 307, 345, 345, 345, 264, 952, - 307, 579, 264, 307, 163, 163, 163, 164, 926, 264, - 952, 164, 164, 164, 550, 491, 164, 491, 164, 550, - 164, 164, 164, 164, 925, 317, 571, 307, 575, 164, - 463, 463, 463, 463, 463, 463, 463, 463, 463, 463, - 463, 463, 463, 463, 463, 463, 463, 463, 463, 463, - 463, 463, 463, 463, 471, 472, 471, 317, 463, 396, - 397, 396, 264, 264, 952, 492, 486, 486, 486, 530, - 264, 952, 487, 580, 255, 189, 255, 357, 488, 346, - - 346, 346, 952, 343, 343, 343, 531, 576, 574, 348, - 350, 488, 541, 347, 541, 264, 264, 212, 223, 223, - 223, 120, 348, 572, 499, 573, 213, 189, 497, 497, - 497, 105, 212, 540, 106, 107, 659, 502, 502, 502, - 264, 500, 105, 503, 223, 223, 223, 105, 264, 488, - 120, 498, 369, 370, 369, 581, 504, 796, 577, 799, - 364, 643, 509, 510, 509, 540, 264, 224, 356, 524, - 120, 524, 524, 120, 524, 224, 550, 376, 377, 376, - 113, 345, 361, 361, 361, 224, 345, 345, 345, 521, - 264, 378, 345, 345, 505, 345, 363, 345, 120, 120, - - 379, 120, 345, 514, 345, 364, 345, 512, 370, 512, - 599, 241, 599, 356, 662, 518, 519, 518, 264, 525, - 515, 520, 525, 486, 486, 486, 120, 521, 381, 487, - 224, 264, 345, 345, 345, 488, 646, 522, 379, 522, - 671, 924, 522, 522, 264, 264, 348, 372, 373, 372, - 656, 389, 389, 389, 538, 539, 538, 583, 300, 583, - 600, 241, 255, 657, 255, 583, 444, 583, 264, 675, - 242, 261, 120, 264, 256, 540, 120, 660, 301, 163, - 163, 163, 591, 591, 591, 588, 618, 517, 592, 471, - 472, 471, 488, 212, 488, 489, 264, 489, 311, 763, - - 489, 489, 589, 952, 868, 457, 661, 540, 553, 553, - 301, 553, 553, 553, 553, 553, 553, 553, 553, 553, - 553, 553, 553, 553, 553, 553, 553, 553, 553, 554, - 555, 553, 553, 553, 553, 555, 555, 555, 555, 555, - 555, 555, 555, 555, 555, 555, 555, 555, 555, 555, - 555, 555, 555, 555, 555, 555, 555, 555, 555, 264, - 553, 553, 553, 553, 560, 561, 560, 163, 163, 163, - 562, 921, 952, 921, 486, 486, 486, 663, 264, 593, - 595, 596, 595, 233, 264, 618, 306, 460, 461, 460, - 307, 488, 392, 306, 625, 626, 563, 348, 564, 550, - - 264, 540, 952, 307, 393, 491, 120, 491, 394, 668, - 307, 223, 223, 223, 565, 345, 454, 454, 454, 264, - 345, 345, 345, 223, 223, 223, 345, 345, 594, 345, - 456, 345, 120, 540, 224, 504, 345, 853, 345, 457, - 345, 597, 163, 597, 658, 644, 224, 306, 598, 316, - 598, 598, 461, 598, 306, 492, 264, 306, 640, 605, - 606, 605, 540, 641, 307, 952, 345, 345, 345, 521, - 264, 307, 923, 264, 307, 264, 666, 607, 472, 607, - 119, 685, 952, 952, 264, 497, 497, 497, 186, 667, - 264, 222, 672, 264, 540, 497, 497, 497, 186, 186, - - 952, 187, 188, 673, 186, 497, 497, 497, 186, 186, - 676, 222, 264, 264, 186, 669, 189, 264, 498, 186, - 629, 629, 629, 687, 186, 572, 630, 509, 510, 509, - 264, 684, 488, 356, 636, 370, 636, 518, 519, 518, - 356, 918, 917, 224, 524, 120, 524, 113, 189, 655, - 224, 655, 636, 510, 636, 674, 120, 224, 356, 541, - 379, 541, 251, 251, 251, 538, 539, 538, 252, 264, - 540, 264, 264, 264, 264, 224, 124, 123, 123, 123, - 540, 264, 120, 120, 689, 253, 540, 264, 311, 683, - 264, 124, 686, 730, 525, 688, 547, 264, 740, 732, - - 253, 350, 540, 264, 547, 583, 444, 583, 734, 264, - 264, 873, 540, 748, 874, 808, 846, 760, 540, 410, - 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, - 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, - 411, 136, 410, 410, 410, 410, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 410, 410, 410, 410, 410, 553, 553, 916, 120, 916, - 120, 553, 553, 553, 553, 553, 553, 553, 553, 553, - 553, 553, 553, 553, 553, 553, 553, 553, 553, 553, - - 553, 553, 553, 553, 553, 664, 665, 867, 599, 938, - 599, 665, 665, 665, 665, 665, 665, 665, 665, 665, - 665, 665, 665, 665, 665, 665, 665, 665, 665, 665, - 665, 665, 665, 665, 665, 560, 561, 560, 163, 163, - 163, 562, 264, 120, 306, 697, 697, 697, 163, 163, - 163, 698, 386, 952, 163, 163, 163, 488, 600, 952, - 124, 307, 264, 746, 264, 264, 593, 264, 307, 387, - 264, 307, 264, 747, 264, 550, 749, 307, 550, 752, - 795, 757, 750, 915, 550, 565, 677, 678, 679, 678, - 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, - - 677, 677, 677, 677, 677, 677, 677, 680, 681, 677, - 682, 677, 677, 681, 681, 681, 681, 681, 681, 681, - 681, 681, 681, 681, 681, 681, 681, 681, 681, 681, - 681, 681, 681, 681, 681, 681, 681, 677, 677, 677, - 677, 677, 690, 690, 913, 690, 690, 690, 690, 690, - 690, 690, 690, 691, 690, 690, 690, 690, 690, 690, - 690, 690, 690, 692, 693, 690, 690, 690, 690, 693, - 693, 693, 693, 693, 693, 693, 693, 693, 693, 693, - 693, 693, 693, 693, 693, 693, 693, 693, 693, 693, - 693, 693, 693, 690, 690, 690, 690, 690, 595, 596, - - 595, 701, 163, 701, 306, 264, 120, 306, 597, 163, - 597, 598, 461, 598, 306, 912, 911, 306, 655, 540, - 655, 307, 540, 762, 307, 264, 605, 606, 605, 540, - 264, 307, 952, 264, 307, 707, 472, 707, 264, 540, - 264, 952, 707, 606, 707, 264, 754, 264, 952, 952, - 733, 540, 482, 755, 540, 765, 758, 764, 952, 756, - 212, 540, 120, 398, 264, 952, 690, 690, 547, 483, - 884, 540, 690, 690, 690, 690, 690, 690, 690, 690, - 690, 690, 690, 690, 690, 690, 690, 690, 690, 690, - 690, 690, 690, 690, 690, 690, 343, 343, 343, 223, - - 223, 223, 344, 264, 794, 356, 359, 359, 359, 264, - 212, 398, 360, 550, 264, 223, 223, 223, 264, 213, - 212, 356, 224, 906, 636, 510, 636, 485, 550, 229, - 356, 343, 343, 343, 803, 482, 802, 344, 224, 264, - 389, 389, 389, 212, 264, 212, 390, 224, 759, 804, - 759, 255, 483, 255, 213, 741, 742, 741, 677, 952, - 677, 743, 264, 256, 677, 161, 161, 161, 264, 806, - 452, 452, 452, 905, 120, 264, 453, 163, 163, 163, - 264, 677, 839, 306, 212, 264, 264, 744, 772, 485, - 707, 606, 707, 310, 264, 618, 952, 264, 759, 550, - - 307, 486, 486, 486, 550, 745, 761, 487, 264, 264, - 264, 807, 952, 952, 264, 812, 831, 113, 805, 675, - 677, 677, 904, 848, 348, 550, 677, 677, 677, 677, - 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, - 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, - 766, 767, 768, 767, 766, 766, 766, 766, 766, 766, - 766, 766, 766, 766, 766, 766, 766, 766, 766, 766, - 766, 769, 770, 766, 771, 766, 766, 770, 770, 770, - 770, 770, 770, 770, 770, 770, 770, 770, 770, 770, - 770, 770, 770, 770, 770, 770, 770, 770, 770, 770, - - 770, 766, 766, 766, 766, 766, 701, 163, 701, 161, - 161, 161, 306, 903, 223, 223, 223, 502, 502, 502, - 499, 120, 264, 503, 486, 486, 486, 540, 212, 307, - 487, 530, 772, 798, 798, 798, 255, 500, 255, 264, - 364, 264, 120, 618, 799, 814, 799, 348, 531, 741, - 742, 741, 264, 813, 922, 743, 800, 902, 264, 540, - 952, 113, 766, 952, 766, 550, 264, 264, 766, 163, - 163, 163, 591, 591, 591, 588, 550, 550, 592, 840, - 822, 822, 822, 212, 832, 766, 264, 120, 907, 828, - 829, 828, 589, 120, 264, 457, 120, 842, 861, 745, - - 810, 810, 810, 823, 810, 810, 810, 629, 629, 629, - 810, 810, 830, 630, 833, 833, 833, 835, 841, 835, - 834, 264, 835, 835, 264, 799, 857, 799, 857, 264, - 224, 857, 857, 836, 697, 697, 697, 800, 382, 869, - 698, 264, 264, 847, 799, 837, 799, 120, 881, 838, - 810, 264, 810, 815, 876, 120, 870, 307, 866, 120, - 866, 882, 264, 866, 866, 947, 898, 766, 766, 893, - 861, 883, 908, 766, 766, 766, 766, 766, 766, 766, - 766, 766, 766, 766, 766, 766, 766, 766, 766, 766, - 766, 766, 766, 766, 766, 766, 766, 810, 810, 810, - - 120, 810, 810, 810, 854, 854, 854, 810, 810, 889, - 855, 862, 863, 862, 264, 856, 856, 864, 854, 854, - 854, 264, 889, 865, 855, 900, 952, 823, 856, 264, - 856, 833, 833, 833, 830, 910, 836, 892, 414, 952, - 909, 823, 799, 264, 799, 853, 891, 810, 837, 810, - 888, 887, 838, 931, 800, 877, 877, 877, 877, 877, - 877, 877, 877, 877, 877, 877, 877, 877, 877, 877, - 877, 877, 877, 877, 877, 877, 878, 136, 877, 877, - 877, 877, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - - 136, 136, 136, 136, 136, 136, 877, 877, 877, 877, - 877, 879, 879, 879, 879, 879, 879, 879, 879, 879, - 879, 879, 879, 879, 879, 879, 879, 879, 879, 879, - 879, 879, 880, 136, 879, 879, 879, 879, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 879, 879, 879, 879, 879, 854, 854, 854, - 895, 862, 863, 862, 120, 896, 833, 833, 833, 264, - 886, 865, 834, 264, 885, 920, 844, 799, 949, 799, - 823, 949, 119, 940, 830, 875, 872, 930, 860, 800, - - 928, 928, 928, 928, 928, 928, 928, 928, 928, 928, - 928, 928, 928, 928, 928, 928, 928, 928, 928, 928, - 928, 929, 136, 928, 928, 928, 928, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 928, 928, 928, 928, 928, 264, 854, 854, 854, - 854, 854, 854, 855, 120, 869, 855, 889, 889, 264, - 799, 859, 799, 263, 263, 136, 136, 263, 550, 136, - 823, 858, 870, 823, 952, 952, 399, 399, 945, 853, - 399, 852, 851, 382, 941, 941, 941, 941, 941, 941, - - 941, 941, 941, 941, 941, 941, 941, 941, 941, 941, - 941, 941, 941, 941, 941, 942, 136, 941, 941, 941, - 941, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, - 136, 136, 136, 136, 136, 941, 941, 941, 941, 941, - 264, 399, 399, 399, 399, 399, 850, 399, 450, 845, - 844, 742, 255, 826, 825, 824, 820, 819, 818, 817, - 817, 816, 264, 398, 264, 264, 742, 255, 797, 255, - 948, 47, 47, 47, 47, 47, 47, 47, 47, 47, - 47, 47, 47, 47, 47, 47, 47, 47, 47, 47, - - 47, 47, 50, 50, 50, 50, 50, 50, 50, 50, - 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, - 50, 50, 50, 52, 52, 52, 52, 52, 52, 52, - 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, - 52, 52, 52, 52, 56, 56, 56, 56, 56, 56, - 56, 56, 56, 56, 56, 56, 56, 56, 56, 56, - 56, 56, 56, 56, 56, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, - 48, 48, 48, 48, 48, 48, 59, 59, 59, 59, - 59, 59, 59, 59, 59, 59, 59, 59, 59, 59, - - 59, 59, 59, 59, 59, 59, 59, 62, 62, 62, - 62, 62, 62, 62, 62, 62, 62, 62, 62, 62, - 62, 62, 62, 62, 62, 62, 62, 62, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, - 65, 65, 65, 65, 65, 65, 65, 65, 65, 71, - 71, 71, 71, 71, 71, 71, 71, 71, 71, 71, - 71, 71, 71, 71, 71, 71, 71, 71, 71, 71, - 74, 74, 74, 74, 74, 74, 74, 74, 74, 74, - 74, 74, 74, 74, 74, 74, 74, 74, 74, 74, - 74, 119, 119, 119, 119, 119, 119, 119, 119, 119, - - 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, - 119, 119, 129, 793, 793, 792, 129, 129, 129, 129, - 791, 791, 790, 129, 129, 164, 164, 164, 164, 789, - 164, 164, 164, 164, 164, 788, 164, 164, 164, 164, - 787, 787, 786, 164, 164, 174, 174, 785, 174, 174, - 174, 174, 174, 174, 174, 174, 174, 174, 174, 174, - 174, 174, 784, 174, 174, 174, 176, 176, 760, 176, - 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, - 176, 176, 176, 783, 176, 176, 176, 180, 180, 782, - 180, 180, 180, 180, 180, 180, 180, 180, 180, 180, - - 180, 180, 180, 180, 781, 180, 180, 180, 190, 190, - 190, 780, 190, 190, 779, 190, 190, 190, 778, 190, - 190, 777, 190, 776, 776, 190, 190, 190, 191, 191, - 775, 191, 191, 191, 773, 191, 113, 191, 191, 191, - 191, 264, 398, 690, 191, 191, 194, 264, 398, 194, - 194, 194, 561, 194, 753, 194, 194, 194, 194, 751, - 739, 738, 194, 194, 204, 204, 737, 736, 204, 204, - 255, 735, 731, 204, 204, 731, 204, 485, 728, 113, - 204, 204, 206, 726, 725, 725, 206, 206, 724, 722, - 368, 206, 206, 206, 206, 367, 721, 720, 206, 206, - - 108, 108, 108, 719, 718, 108, 108, 108, 108, 108, - 718, 108, 108, 108, 108, 717, 715, 714, 108, 108, - 225, 225, 713, 225, 225, 225, 225, 225, 225, 225, - 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, - 225, 226, 226, 226, 712, 711, 226, 226, 226, 226, - 226, 710, 226, 226, 226, 226, 709, 708, 706, 226, - 226, 302, 302, 705, 704, 703, 702, 700, 696, 694, - 304, 303, 302, 561, 654, 302, 653, 652, 651, 302, - 302, 324, 324, 650, 324, 324, 324, 324, 324, 324, - 324, 324, 324, 324, 324, 324, 324, 324, 324, 324, - - 324, 324, 325, 649, 647, 120, 120, 639, 325, 120, - 637, 325, 635, 633, 632, 325, 325, 328, 628, 624, - 328, 623, 622, 328, 621, 485, 620, 328, 328, 345, - 345, 345, 345, 345, 345, 345, 345, 345, 345, 345, - 345, 345, 345, 345, 345, 345, 345, 345, 345, 345, - 355, 355, 617, 355, 355, 355, 355, 355, 355, 355, - 355, 355, 355, 355, 355, 355, 355, 355, 355, 355, - 355, 362, 362, 362, 362, 362, 362, 362, 362, 362, - 362, 362, 362, 362, 362, 362, 362, 362, 362, 362, - 362, 362, 375, 375, 375, 375, 375, 375, 375, 375, - - 375, 375, 375, 375, 375, 375, 375, 375, 375, 375, - 375, 375, 375, 388, 388, 350, 388, 388, 388, 388, - 388, 388, 388, 388, 388, 388, 388, 388, 388, 388, - 388, 388, 388, 388, 445, 445, 615, 614, 613, 612, - 611, 610, 609, 608, 604, 603, 602, 601, 445, 314, - 587, 586, 585, 445, 447, 584, 398, 447, 398, 398, - 398, 447, 447, 448, 448, 398, 448, 448, 448, 448, - 448, 448, 448, 448, 448, 448, 448, 448, 448, 448, - 448, 448, 448, 448, 449, 449, 537, 449, 449, 449, - 449, 449, 449, 449, 449, 449, 449, 449, 449, 449, - - 449, 449, 449, 449, 449, 451, 451, 536, 451, 451, - 451, 451, 451, 451, 451, 451, 451, 451, 451, 451, - 451, 451, 451, 451, 451, 451, 455, 455, 455, 455, - 455, 455, 455, 455, 455, 455, 455, 455, 455, 455, - 455, 455, 455, 455, 455, 455, 455, 190, 533, 529, - 190, 258, 120, 513, 190, 190, 475, 475, 475, 475, - 475, 475, 475, 475, 475, 475, 475, 475, 508, 475, - 475, 507, 475, 475, 475, 475, 475, 429, 429, 429, - 429, 429, 429, 429, 429, 429, 429, 429, 429, 506, - 429, 429, 495, 429, 429, 429, 429, 429, 420, 420, - - 420, 420, 420, 420, 420, 420, 420, 420, 420, 420, - 494, 420, 420, 493, 420, 420, 420, 420, 420, 484, - 484, 490, 484, 484, 484, 484, 484, 484, 484, 484, - 484, 484, 484, 484, 484, 484, 484, 484, 484, 484, - 496, 496, 485, 496, 496, 496, 496, 496, 496, 496, - 496, 496, 496, 496, 496, 496, 496, 496, 496, 496, - 496, 501, 501, 481, 501, 501, 501, 501, 501, 501, - 501, 501, 501, 501, 501, 501, 501, 501, 501, 501, - 501, 501, 108, 108, 108, 480, 479, 108, 108, 108, - 108, 108, 478, 108, 108, 108, 108, 477, 476, 474, - - 108, 108, 511, 511, 473, 952, 511, 469, 468, 467, - 466, 465, 464, 172, 511, 311, 511, 398, 262, 398, - 395, 511, 516, 516, 516, 516, 516, 516, 516, 516, - 516, 516, 516, 516, 516, 516, 516, 516, 516, 516, - 516, 516, 516, 375, 375, 375, 375, 375, 375, 375, - 375, 375, 375, 375, 375, 375, 375, 375, 375, 375, - 375, 375, 375, 375, 528, 528, 371, 528, 528, 528, - 528, 528, 528, 528, 528, 528, 528, 528, 528, 528, - 528, 528, 528, 528, 528, 532, 532, 366, 532, 532, - 532, 532, 532, 532, 532, 532, 532, 532, 532, 532, - - 532, 532, 532, 532, 532, 532, 590, 590, 365, 590, - 590, 590, 590, 590, 590, 590, 590, 590, 590, 590, - 590, 590, 590, 590, 590, 590, 590, 616, 616, 108, - 616, 616, 616, 616, 616, 616, 616, 616, 616, 616, - 616, 616, 616, 616, 616, 616, 616, 616, 619, 619, - 358, 619, 619, 619, 619, 619, 619, 619, 619, 619, - 619, 619, 619, 619, 619, 619, 619, 619, 619, 627, - 627, 357, 627, 627, 627, 627, 627, 627, 627, 627, - 627, 627, 627, 627, 627, 627, 627, 627, 627, 627, - 631, 631, 351, 631, 631, 631, 631, 631, 631, 631, - - 631, 631, 631, 631, 631, 631, 631, 631, 631, 631, - 631, 634, 634, 634, 634, 634, 634, 634, 634, 634, - 634, 634, 634, 352, 634, 634, 351, 634, 634, 634, - 634, 634, 638, 638, 638, 638, 638, 638, 638, 638, - 638, 638, 638, 638, 638, 638, 638, 638, 638, 638, - 638, 638, 638, 642, 642, 642, 642, 642, 642, 642, - 642, 642, 642, 642, 642, 642, 642, 642, 642, 642, - 642, 642, 642, 642, 648, 648, 354, 648, 648, 648, - 648, 648, 648, 648, 648, 648, 648, 648, 648, 648, - 648, 648, 648, 648, 648, 670, 670, 670, 670, 670, - - 670, 670, 670, 670, 670, 670, 670, 670, 670, 670, - 670, 670, 670, 670, 670, 670, 695, 695, 353, 695, - 695, 695, 695, 695, 695, 695, 695, 695, 695, 695, - 695, 695, 695, 695, 695, 695, 695, 699, 699, 352, - 699, 699, 699, 699, 699, 699, 699, 699, 699, 699, - 699, 699, 699, 699, 699, 699, 699, 699, 716, 716, - 351, 716, 716, 716, 716, 716, 716, 716, 716, 716, - 716, 716, 716, 716, 716, 716, 716, 716, 716, 723, - 723, 351, 723, 723, 723, 723, 723, 723, 723, 723, - 723, 723, 723, 723, 723, 723, 723, 723, 723, 723, - - 727, 727, 727, 727, 727, 727, 727, 727, 727, 727, - 727, 727, 342, 727, 727, 338, 727, 727, 727, 727, - 727, 729, 729, 729, 729, 729, 729, 729, 729, 729, - 729, 729, 729, 729, 729, 729, 729, 729, 729, 729, - 729, 729, 774, 774, 336, 774, 774, 774, 774, 774, - 774, 774, 774, 774, 774, 774, 774, 774, 774, 774, - 774, 774, 774, 801, 801, 801, 801, 801, 801, 801, - 801, 801, 801, 801, 801, 801, 801, 801, 801, 801, - 801, 801, 801, 801, 809, 809, 809, 809, 809, 809, - 809, 809, 809, 809, 809, 809, 809, 809, 809, 809, - - 809, 335, 809, 809, 809, 811, 811, 334, 811, 811, - 811, 811, 811, 811, 811, 811, 811, 811, 811, 811, - 811, 811, 811, 811, 811, 811, 821, 821, 821, 821, - 821, 821, 821, 821, 821, 821, 821, 821, 821, 821, - 821, 821, 821, 821, 821, 821, 821, 827, 827, 827, - 827, 827, 827, 827, 827, 827, 827, 827, 827, 827, - 827, 827, 827, 827, 827, 827, 827, 827, 843, 843, - 843, 843, 843, 331, 843, 843, 843, 843, 843, 843, - 843, 843, 843, 843, 843, 843, 843, 843, 843, 849, - 849, 188, 849, 849, 849, 849, 849, 849, 849, 849, - - 849, 849, 849, 849, 849, 849, 849, 849, 849, 849, - 871, 871, 323, 871, 871, 871, 871, 871, 871, 871, - 871, 871, 871, 871, 871, 871, 871, 871, 871, 871, - 871, 890, 890, 322, 890, 890, 890, 890, 890, 890, - 890, 890, 890, 890, 890, 890, 890, 890, 890, 890, - 890, 890, 894, 894, 894, 894, 894, 894, 894, 894, - 894, 894, 894, 894, 321, 894, 894, 320, 894, 894, - 894, 894, 894, 897, 897, 897, 897, 897, 897, 897, - 897, 897, 897, 897, 897, 897, 897, 897, 897, 897, - 897, 897, 897, 897, 901, 901, 319, 901, 901, 901, - - 901, 901, 901, 901, 901, 901, 901, 901, 901, 901, - 901, 901, 901, 901, 901, 914, 914, 311, 914, 914, - 914, 914, 914, 914, 914, 914, 914, 914, 914, 914, - 914, 914, 914, 914, 914, 914, 919, 919, 919, 919, - 919, 919, 919, 919, 919, 919, 919, 919, 919, 919, - 919, 919, 919, 919, 919, 919, 919, 944, 944, 944, - 944, 944, 944, 944, 944, 944, 944, 944, 944, 304, - 944, 944, 303, 944, 944, 944, 944, 944, 941, 941, - 941, 941, 941, 941, 941, 941, 941, 941, 941, 941, - 264, 941, 941, 262, 941, 941, 941, 941, 941, 951, - - 951, 259, 951, 951, 951, 951, 951, 951, 951, 951, - 951, 951, 951, 951, 951, 120, 951, 951, 951, 951, - 236, 120, 178, 120, 178, 178, 178, 181, 177, 175, - 952, 58, 58, 27, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952 - } ; - -static yyconst flex_int16_t yy_chk[5191] = - { 0, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, - 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - - 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, - 2, 2, 3, 4, 5, 6, 7, 7, 8, 8, - 9, 10, 13, 14, 15, 16, 17, 949, 18, 393, - 147, 17, 393, 18, 3, 4, 5, 6, 19, 7, - 20, 8, 9, 10, 13, 14, 15, 16, 17, 19, - 18, 20, 21, 147, 19, 152, 20, 21, 19, 234, - 20, 22, 3, 4, 5, 6, 22, 234, 28, 152, - 9, 10, 244, 33, 21, 17, 17, 18, 18, 28, - 30, 30, 30, 22, 33, 31, 32, 35, 39, 39, - 39, 55, 31, 32, 35, 33, 35, 40, 55, 288, - - 39, 21, 21, 31, 32, 35, 288, 943, 40, 244, - 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, - 23, 23, 23, 23, 23, 23, 23, 23, 25, 25, - 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, - 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, - 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, - - 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, - 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, - 25, 25, 25, 25, 29, 29, 29, 29, 79, 942, - 29, 29, 29, 29, 278, 85, 29, 91, 29, 79, - 29, 29, 29, 29, 278, 29, 85, 29, 91, 29, - 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, - 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, - 29, 29, 29, 29, 36, 46, 29, 29, 29, 34, - 34, 34, 46, 36, 247, 36, 38, 36, 38, 98, - 149, 34, 249, 34, 82, 38, 149, 38, 100, 38, - - 149, 82, 34, 84, 98, 145, 42, 42, 42, 100, - 84, 42, 82, 98, 46, 36, 37, 37, 42, 37, - 37, 84, 154, 247, 167, 145, 37, 38, 249, 42, - 167, 37, 37, 37, 37, 37, 154, 37, 37, 37, - 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, - 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, - 37, 37, 37, 41, 41, 41, 43, 43, 43, 93, - 245, 43, 939, 269, 83, 41, 93, 68, 43, 44, - 44, 44, 76, 140, 44, 83, 41, 93, 266, 43, - 140, 44, 140, 44, 68, 141, 83, 269, 68, 76, - - 201, 68, 44, 76, 201, 141, 76, 141, 90, 90, - 90, 246, 148, 245, 266, 41, 45, 45, 45, 45, - 90, 68, 68, 45, 45, 45, 76, 76, 45, 936, - 45, 148, 45, 45, 45, 45, 148, 45, 243, 45, - 246, 45, 45, 45, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 45, 45, 45, 45, - 45, 45, 45, 45, 45, 45, 143, 250, 243, 45, - 45, 80, 80, 80, 80, 86, 143, 80, 80, 400, - 143, 117, 86, 80, 86, 80, 92, 92, 92, 94, - 80, 153, 80, 86, 80, 95, 94, 235, 92, 96, - - 129, 235, 95, 117, 95, 400, 96, 94, 153, 92, - 250, 129, 153, 95, 117, 117, 129, 96, 129, 101, - 101, 101, 290, 80, 80, 81, 81, 81, 81, 197, - 208, 81, 81, 101, 189, 197, 208, 81, 92, 81, - 102, 189, 101, 102, 81, 265, 81, 102, 81, 290, - 129, 102, 102, 275, 932, 102, 102, 102, 105, 105, - 105, 103, 103, 103, 103, 265, 150, 103, 104, 104, - 104, 104, 275, 189, 104, 103, 150, 81, 81, 87, - 103, 105, 104, 87, 87, 87, 150, 104, 87, 108, - 108, 108, 87, 87, 87, 87, 248, 87, 267, 87, - - 929, 87, 109, 109, 109, 114, 114, 114, 114, 146, - 267, 114, 108, 121, 121, 121, 109, 270, 146, 114, - 115, 115, 115, 115, 114, 109, 115, 121, 146, 87, - 88, 927, 151, 248, 115, 271, 121, 270, 88, 115, - 155, 271, 88, 115, 190, 88, 124, 124, 124, 88, - 155, 190, 88, 151, 88, 281, 151, 124, 88, 124, - 124, 88, 89, 155, 281, 281, 89, 89, 89, 124, - 289, 89, 191, 89, 268, 89, 89, 89, 89, 191, - 89, 289, 89, 190, 89, 123, 123, 123, 193, 125, - 191, 123, 125, 251, 125, 193, 268, 125, 125, 123, - - 169, 251, 158, 158, 158, 284, 193, 204, 123, 169, - 251, 169, 89, 97, 204, 284, 169, 125, 97, 97, - 169, 127, 97, 158, 272, 204, 97, 97, 97, 276, - 127, 97, 127, 97, 279, 97, 194, 127, 194, 127, - 276, 127, 138, 127, 272, 138, 276, 194, 926, 138, - 203, 173, 203, 138, 138, 158, 279, 138, 138, 138, - 173, 203, 173, 97, 99, 403, 163, 163, 163, 99, - 99, 127, 163, 99, 142, 99, 291, 99, 99, 99, - 142, 144, 99, 142, 99, 403, 99, 142, 427, 163, - 144, 142, 173, 144, 142, 159, 142, 142, 291, 144, - - 144, 283, 164, 164, 164, 427, 159, 164, 381, 144, - 171, 159, 171, 159, 99, 107, 107, 107, 107, 171, - 283, 171, 107, 107, 107, 164, 206, 107, 206, 107, - 285, 107, 107, 107, 107, 282, 381, 206, 107, 925, - 107, 110, 110, 110, 110, 159, 285, 293, 110, 110, - 110, 171, 210, 110, 210, 110, 282, 110, 110, 110, - 110, 293, 110, 210, 110, 526, 110, 110, 110, 110, - 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, - 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, - 110, 236, 236, 236, 110, 110, 111, 294, 526, 111, - - 111, 920, 301, 111, 260, 260, 260, 111, 111, 294, - 295, 111, 111, 111, 122, 162, 295, 296, 162, 165, - 165, 165, 162, 213, 165, 213, 162, 162, 213, 213, - 162, 162, 162, 165, 301, 296, 168, 168, 168, 213, - 122, 168, 165, 122, 170, 170, 170, 122, 919, 170, - 168, 122, 122, 428, 305, 122, 122, 122, 305, 168, - 211, 211, 211, 261, 261, 261, 211, 170, 172, 172, - 172, 172, 298, 343, 211, 172, 172, 172, 428, 385, - 172, 343, 172, 211, 172, 172, 172, 172, 298, 172, - 343, 172, 326, 172, 172, 172, 172, 172, 172, 172, - - 172, 172, 172, 172, 172, 172, 172, 172, 172, 172, - 172, 172, 172, 172, 172, 172, 172, 172, 192, 205, - 385, 172, 172, 273, 326, 297, 408, 192, 205, 192, - 205, 212, 212, 212, 192, 205, 192, 205, 192, 205, - 223, 223, 223, 918, 273, 212, 223, 297, 273, 277, - 402, 227, 227, 227, 212, 408, 253, 227, 253, 917, - 419, 253, 253, 223, 402, 227, 292, 277, 192, 205, - 226, 226, 226, 226, 227, 277, 292, 226, 226, 226, - 419, 253, 226, 292, 226, 405, 226, 226, 226, 226, - 241, 241, 241, 226, 375, 226, 228, 228, 228, 228, - - 417, 228, 228, 228, 241, 375, 384, 228, 228, 405, - 228, 228, 228, 241, 417, 286, 438, 228, 373, 228, - 228, 228, 229, 286, 229, 229, 373, 229, 229, 438, - 915, 239, 239, 239, 384, 373, 286, 239, 229, 299, - 299, 299, 257, 257, 257, 239, 442, 228, 228, 228, - 230, 230, 230, 230, 239, 401, 257, 230, 230, 230, - 442, 401, 230, 418, 230, 257, 230, 230, 230, 230, - 351, 230, 351, 230, 418, 230, 230, 230, 230, 230, - 230, 230, 230, 230, 230, 230, 230, 230, 230, 230, - 230, 230, 230, 230, 230, 230, 230, 230, 230, 230, - - 300, 300, 300, 230, 230, 237, 237, 237, 237, 404, - 914, 237, 240, 240, 240, 302, 242, 404, 240, 237, - 351, 409, 302, 327, 237, 867, 240, 242, 237, 242, - 327, 406, 242, 242, 407, 240, 254, 254, 254, 256, - 409, 256, 254, 242, 256, 256, 348, 254, 348, 254, - 413, 348, 348, 406, 302, 256, 413, 407, 364, 254, - 364, 364, 327, 364, 364, 913, 867, 256, 443, 443, - 443, 256, 274, 274, 274, 274, 274, 274, 274, 274, - 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, - 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, - - 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, - 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, - 274, 274, 274, 274, 274, 274, 274, 274, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, - 280, 280, 280, 280, 287, 287, 287, 287, 287, 287, - 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, - - 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, - 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, - 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, - 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, - 308, 308, 308, 416, 415, 310, 308, 310, 310, 431, - 310, 310, 415, 416, 308, 328, 912, 423, 911, 431, - 906, 310, 328, 308, 309, 309, 309, 309, 412, 309, - 309, 309, 312, 312, 312, 309, 309, 312, 309, 309, - 309, 313, 313, 313, 423, 309, 313, 309, 309, 309, - 412, 314, 314, 314, 328, 312, 314, 315, 315, 315, - - 316, 316, 316, 315, 313, 424, 316, 330, 330, 330, - 425, 424, 330, 439, 314, 309, 309, 309, 426, 330, - 315, 439, 432, 316, 317, 317, 317, 317, 905, 435, - 330, 317, 317, 317, 425, 352, 317, 352, 317, 426, - 317, 317, 317, 317, 904, 317, 432, 317, 435, 317, - 317, 317, 317, 317, 317, 317, 317, 317, 317, 317, - 317, 317, 317, 317, 317, 317, 317, 317, 317, 317, - 317, 317, 317, 317, 329, 329, 329, 317, 317, 339, - 339, 339, 436, 440, 339, 352, 346, 346, 346, 389, - 434, 339, 346, 440, 389, 329, 389, 500, 346, 347, - - 347, 347, 339, 349, 349, 349, 389, 436, 434, 346, - 500, 347, 397, 347, 397, 433, 546, 349, 359, 359, - 359, 734, 347, 433, 359, 433, 349, 329, 358, 358, - 358, 358, 359, 397, 358, 358, 546, 361, 361, 361, - 437, 359, 358, 361, 362, 362, 362, 358, 441, 361, - 520, 358, 365, 365, 365, 441, 362, 734, 437, 903, - 361, 520, 369, 369, 369, 397, 542, 362, 369, 382, - 382, 382, 383, 383, 383, 365, 542, 378, 378, 378, - 358, 363, 363, 363, 363, 369, 363, 363, 363, 378, - 551, 378, 363, 363, 363, 363, 363, 363, 372, 527, - - 378, 515, 363, 372, 363, 363, 363, 370, 370, 370, - 464, 372, 464, 370, 551, 376, 376, 376, 563, 382, - 372, 376, 383, 377, 377, 377, 379, 376, 515, 377, - 370, 543, 363, 363, 363, 377, 527, 379, 376, 379, - 563, 901, 379, 379, 544, 569, 377, 380, 380, 380, - 543, 391, 391, 391, 396, 396, 396, 444, 444, 444, - 464, 380, 391, 544, 391, 446, 446, 446, 548, 569, - 380, 447, 832, 684, 391, 396, 521, 548, 447, 452, - 452, 452, 454, 454, 454, 452, 486, 521, 454, 470, - 470, 470, 486, 452, 454, 457, 549, 457, 457, 684, - - 457, 457, 452, 486, 832, 454, 549, 396, 414, 414, - 447, 414, 414, 414, 414, 414, 414, 414, 414, 414, - 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, - 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, - 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, - 414, 414, 414, 414, 414, 414, 414, 414, 414, 552, - 414, 414, 414, 414, 422, 422, 422, 455, 455, 455, - 422, 898, 455, 897, 489, 489, 489, 552, 582, 455, - 458, 458, 458, 498, 422, 519, 458, 460, 460, 460, - 455, 519, 531, 460, 498, 498, 422, 489, 422, 582, - - 558, 458, 519, 458, 531, 491, 523, 491, 531, 558, - 460, 504, 504, 504, 422, 456, 456, 456, 456, 545, - 456, 456, 456, 505, 505, 505, 456, 456, 456, 456, - 456, 456, 900, 458, 504, 505, 456, 895, 456, 456, - 456, 459, 459, 459, 545, 523, 505, 459, 461, 461, - 461, 462, 462, 462, 461, 491, 556, 462, 518, 471, - 471, 471, 459, 518, 459, 471, 456, 456, 456, 518, - 557, 461, 900, 564, 462, 574, 556, 472, 472, 472, - 518, 574, 471, 472, 567, 495, 495, 495, 495, 557, - 559, 495, 564, 570, 459, 469, 469, 469, 469, 495, - - 472, 469, 469, 567, 495, 497, 497, 497, 497, 469, - 570, 497, 573, 577, 469, 559, 469, 566, 469, 497, - 502, 502, 502, 577, 497, 566, 502, 509, 509, 509, - 568, 573, 502, 509, 510, 510, 510, 522, 522, 522, - 510, 893, 892, 502, 524, 524, 524, 469, 469, 539, - 509, 539, 512, 512, 512, 568, 644, 510, 512, 541, - 522, 541, 529, 529, 529, 538, 538, 538, 529, 572, - 539, 578, 575, 576, 579, 512, 529, 547, 547, 547, - 541, 580, 641, 646, 579, 529, 538, 676, 589, 572, - 656, 547, 575, 641, 524, 578, 576, 547, 656, 644, - - 547, 589, 539, 660, 580, 583, 583, 583, 646, 757, - 812, 837, 541, 660, 837, 757, 812, 676, 538, 550, - 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, - 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, - 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, - 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, - 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, - 550, 550, 550, 550, 550, 553, 553, 891, 831, 890, - 922, 553, 553, 553, 553, 553, 553, 553, 553, 553, - 553, 553, 553, 553, 553, 553, 553, 553, 553, 553, - - 553, 553, 553, 553, 553, 554, 554, 831, 599, 922, - 599, 554, 554, 554, 554, 554, 554, 554, 554, 554, - 554, 554, 554, 554, 554, 554, 554, 554, 554, 554, - 554, 554, 554, 554, 554, 560, 560, 560, 587, 587, - 587, 560, 658, 733, 587, 591, 591, 591, 593, 593, - 593, 591, 647, 593, 594, 594, 594, 591, 599, 594, - 647, 587, 661, 658, 659, 663, 594, 748, 591, 647, - 666, 593, 673, 659, 668, 663, 661, 594, 748, 666, - 733, 673, 661, 889, 668, 560, 571, 571, 571, 571, - 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, - - 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, - 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, - 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, - 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, - 571, 571, 581, 581, 888, 581, 581, 581, 581, 581, - 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, - 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, - 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, - 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, - 581, 581, 581, 581, 581, 581, 581, 581, 595, 595, - - 595, 596, 596, 596, 595, 683, 645, 596, 597, 597, - 597, 598, 598, 598, 597, 887, 886, 598, 655, 595, - 655, 595, 596, 683, 596, 669, 605, 605, 605, 597, - 686, 597, 605, 671, 598, 606, 606, 606, 672, 655, - 685, 606, 607, 607, 607, 687, 669, 674, 607, 605, - 645, 595, 715, 671, 596, 686, 674, 685, 606, 672, - 715, 597, 732, 880, 848, 607, 613, 613, 687, 715, - 848, 655, 613, 613, 613, 613, 613, 613, 613, 613, - 613, 613, 613, 613, 613, 613, 613, 613, 613, 613, - 613, 613, 613, 613, 613, 613, 617, 617, 617, 624, - - 624, 624, 617, 740, 732, 624, 628, 628, 628, 750, - 617, 878, 628, 740, 744, 629, 629, 629, 747, 617, - 628, 629, 624, 875, 636, 636, 636, 629, 747, 628, - 636, 639, 639, 639, 750, 728, 744, 639, 629, 751, - 649, 649, 649, 728, 755, 639, 649, 636, 675, 751, - 675, 649, 728, 649, 639, 657, 657, 657, 682, 682, - 682, 657, 802, 649, 682, 689, 689, 689, 675, 755, - 696, 696, 696, 874, 795, 657, 696, 697, 697, 697, - 749, 682, 802, 697, 696, 689, 756, 657, 689, 697, - 707, 707, 707, 696, 752, 787, 707, 762, 675, 749, - - 697, 718, 718, 718, 752, 657, 678, 718, 753, 758, - 814, 756, 787, 707, 804, 762, 795, 689, 753, 758, - 678, 678, 873, 814, 718, 804, 678, 678, 678, 678, - 678, 678, 678, 678, 678, 678, 678, 678, 678, 678, - 678, 678, 678, 678, 678, 678, 678, 678, 678, 678, - 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, - 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, - 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, - 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, - 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, - - 688, 688, 688, 688, 688, 688, 701, 701, 701, 712, - 712, 712, 701, 872, 722, 722, 722, 725, 725, 725, - 722, 899, 764, 725, 731, 731, 731, 701, 722, 701, - 731, 735, 712, 739, 739, 739, 735, 722, 735, 763, - 725, 765, 796, 793, 739, 764, 739, 731, 735, 741, - 741, 741, 803, 763, 899, 741, 739, 871, 806, 701, - 793, 712, 771, 771, 771, 765, 805, 876, 771, 773, - 773, 773, 776, 776, 776, 773, 803, 805, 776, 806, - 788, 788, 788, 773, 796, 771, 808, 827, 876, 794, - 794, 794, 773, 861, 807, 776, 938, 808, 827, 741, - - 760, 760, 760, 788, 760, 760, 760, 791, 791, 791, - 760, 760, 794, 791, 798, 798, 798, 800, 807, 800, - 798, 813, 800, 800, 842, 798, 823, 798, 823, 839, - 791, 823, 823, 800, 817, 817, 817, 798, 938, 833, - 817, 945, 846, 813, 833, 800, 833, 830, 842, 800, - 760, 847, 760, 767, 839, 864, 833, 817, 830, 865, - 830, 846, 881, 830, 830, 945, 864, 767, 767, 859, - 865, 847, 881, 767, 767, 767, 767, 767, 767, 767, - 767, 767, 767, 767, 767, 767, 767, 767, 767, 767, - 767, 767, 767, 767, 767, 767, 767, 809, 809, 809, - - 868, 809, 809, 809, 822, 822, 822, 809, 809, 854, - 822, 828, 828, 828, 884, 854, 822, 828, 829, 829, - 829, 883, 863, 828, 829, 868, 854, 822, 863, 882, - 829, 835, 835, 835, 828, 884, 870, 858, 882, 863, - 883, 829, 835, 910, 835, 856, 855, 809, 870, 809, - 852, 851, 870, 910, 835, 840, 840, 840, 840, 840, - 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, - 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, - 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, - 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, - - 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, - 840, 841, 841, 841, 841, 841, 841, 841, 841, 841, - 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, - 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, - 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, - 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, - 841, 841, 841, 841, 841, 841, 841, 857, 857, 857, - 862, 866, 866, 866, 896, 862, 902, 902, 902, 909, - 850, 862, 902, 930, 849, 896, 843, 902, 1043, 902, - 857, 1043, 862, 930, 866, 838, 836, 909, 826, 902, - - 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, - 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, - 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, - 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, - 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, - 907, 907, 907, 907, 907, 907, 908, 916, 916, 916, - 921, 921, 921, 916, 923, 924, 921, 935, 937, 940, - 924, 825, 924, 977, 977, 978, 978, 977, 908, 978, - 916, 824, 924, 921, 935, 937, 988, 988, 940, 821, - 988, 820, 819, 923, 931, 931, 931, 931, 931, 931, - - 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, - 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, - 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, - 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, - 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, - 947, 1008, 1008, 1025, 1025, 1008, 818, 1025, 816, 811, - 810, 801, 797, 792, 790, 789, 786, 784, 777, 775, - 774, 772, 770, 769, 754, 746, 743, 738, 737, 736, - 947, 953, 953, 953, 953, 953, 953, 953, 953, 953, - 953, 953, 953, 953, 953, 953, 953, 953, 953, 953, - - 953, 953, 954, 954, 954, 954, 954, 954, 954, 954, - 954, 954, 954, 954, 954, 954, 954, 954, 954, 954, - 954, 954, 954, 955, 955, 955, 955, 955, 955, 955, - 955, 955, 955, 955, 955, 955, 955, 955, 955, 955, - 955, 955, 955, 955, 956, 956, 956, 956, 956, 956, - 956, 956, 956, 956, 956, 956, 956, 956, 956, 956, - 956, 956, 956, 956, 956, 957, 957, 957, 957, 957, - 957, 957, 957, 957, 957, 957, 957, 957, 957, 957, - 957, 957, 957, 957, 957, 957, 958, 958, 958, 958, - 958, 958, 958, 958, 958, 958, 958, 958, 958, 958, - - 958, 958, 958, 958, 958, 958, 958, 959, 959, 959, - 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, - 959, 959, 959, 959, 959, 959, 959, 959, 960, 960, - 960, 960, 960, 960, 960, 960, 960, 960, 960, 960, - 960, 960, 960, 960, 960, 960, 960, 960, 960, 961, - 961, 961, 961, 961, 961, 961, 961, 961, 961, 961, - 961, 961, 961, 961, 961, 961, 961, 961, 961, 961, - 962, 962, 962, 962, 962, 962, 962, 962, 962, 962, - 962, 962, 962, 962, 962, 962, 962, 962, 962, 962, - 962, 963, 963, 963, 963, 963, 963, 963, 963, 963, - - 963, 963, 963, 963, 963, 963, 963, 963, 963, 963, - 963, 963, 964, 730, 729, 726, 964, 964, 964, 964, - 724, 723, 721, 964, 964, 965, 965, 965, 965, 720, - 965, 965, 965, 965, 965, 719, 965, 965, 965, 965, - 717, 716, 714, 965, 965, 966, 966, 713, 966, 966, - 966, 966, 966, 966, 966, 966, 966, 966, 966, 966, - 966, 966, 711, 966, 966, 966, 967, 967, 710, 967, - 967, 967, 967, 967, 967, 967, 967, 967, 967, 967, - 967, 967, 967, 709, 967, 967, 967, 968, 968, 708, - 968, 968, 968, 968, 968, 968, 968, 968, 968, 968, - - 968, 968, 968, 968, 706, 968, 968, 968, 969, 969, - 969, 705, 969, 969, 704, 969, 969, 969, 703, 969, - 969, 702, 969, 700, 699, 969, 969, 969, 970, 970, - 698, 970, 970, 970, 695, 970, 694, 970, 970, 970, - 970, 693, 692, 691, 970, 970, 971, 681, 680, 971, - 971, 971, 670, 971, 667, 971, 971, 971, 971, 662, - 654, 653, 971, 971, 972, 972, 652, 651, 972, 972, - 650, 648, 643, 972, 972, 642, 972, 640, 638, 635, - 972, 972, 973, 633, 632, 631, 973, 973, 630, 627, - 626, 973, 973, 973, 973, 625, 623, 622, 973, 973, - - 974, 974, 974, 621, 620, 974, 974, 974, 974, 974, - 619, 974, 974, 974, 974, 618, 616, 615, 974, 974, - 975, 975, 614, 975, 975, 975, 975, 975, 975, 975, - 975, 975, 975, 975, 975, 975, 975, 975, 975, 975, - 975, 976, 976, 976, 612, 611, 976, 976, 976, 976, - 976, 610, 976, 976, 976, 976, 609, 608, 604, 976, - 976, 979, 979, 603, 602, 601, 600, 592, 590, 586, - 585, 584, 979, 562, 537, 979, 536, 535, 534, 979, - 979, 980, 980, 533, 980, 980, 980, 980, 980, 980, - 980, 980, 980, 980, 980, 980, 980, 980, 980, 980, - - 980, 980, 981, 532, 528, 525, 517, 516, 981, 514, - 513, 981, 508, 506, 503, 981, 981, 982, 501, 496, - 982, 494, 493, 982, 490, 488, 487, 982, 982, 983, - 983, 983, 983, 983, 983, 983, 983, 983, 983, 983, - 983, 983, 983, 983, 983, 983, 983, 983, 983, 983, - 984, 984, 484, 984, 984, 984, 984, 984, 984, 984, - 984, 984, 984, 984, 984, 984, 984, 984, 984, 984, - 984, 985, 985, 985, 985, 985, 985, 985, 985, 985, - 985, 985, 985, 985, 985, 985, 985, 985, 985, 985, - 985, 985, 986, 986, 986, 986, 986, 986, 986, 986, - - 986, 986, 986, 986, 986, 986, 986, 986, 986, 986, - 986, 986, 986, 987, 987, 483, 987, 987, 987, 987, - 987, 987, 987, 987, 987, 987, 987, 987, 987, 987, - 987, 987, 987, 987, 989, 989, 481, 480, 479, 478, - 477, 476, 474, 473, 468, 467, 466, 465, 989, 463, - 451, 450, 449, 989, 990, 448, 430, 990, 421, 411, - 399, 990, 990, 991, 991, 398, 991, 991, 991, 991, - 991, 991, 991, 991, 991, 991, 991, 991, 991, 991, - 991, 991, 991, 991, 992, 992, 395, 992, 992, 992, - 992, 992, 992, 992, 992, 992, 992, 992, 992, 992, - - 992, 992, 992, 992, 992, 993, 993, 394, 993, 993, - 993, 993, 993, 993, 993, 993, 993, 993, 993, 993, - 993, 993, 993, 993, 993, 993, 994, 994, 994, 994, - 994, 994, 994, 994, 994, 994, 994, 994, 994, 994, - 994, 994, 994, 994, 994, 994, 994, 995, 392, 388, - 995, 387, 374, 371, 995, 995, 996, 996, 996, 996, - 996, 996, 996, 996, 996, 996, 996, 996, 368, 996, - 996, 367, 996, 996, 996, 996, 996, 997, 997, 997, - 997, 997, 997, 997, 997, 997, 997, 997, 997, 366, - 997, 997, 355, 997, 997, 997, 997, 997, 998, 998, - - 998, 998, 998, 998, 998, 998, 998, 998, 998, 998, - 354, 998, 998, 353, 998, 998, 998, 998, 998, 999, - 999, 350, 999, 999, 999, 999, 999, 999, 999, 999, - 999, 999, 999, 999, 999, 999, 999, 999, 999, 999, - 1000, 1000, 345, 1000, 1000, 1000, 1000, 1000, 1000, 1000, - 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, - 1000, 1001, 1001, 342, 1001, 1001, 1001, 1001, 1001, 1001, - 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, - 1001, 1001, 1002, 1002, 1002, 340, 338, 1002, 1002, 1002, - 1002, 1002, 337, 1002, 1002, 1002, 1002, 336, 335, 332, - - 1002, 1002, 1003, 1003, 331, 325, 1003, 324, 323, 322, - 321, 320, 319, 318, 1003, 307, 1003, 264, 263, 262, - 258, 1003, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, - 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, - 1004, 1004, 1004, 1005, 1005, 1005, 1005, 1005, 1005, 1005, - 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, - 1005, 1005, 1005, 1005, 1006, 1006, 238, 1006, 1006, 1006, - 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, - 1006, 1006, 1006, 1006, 1006, 1007, 1007, 233, 1007, 1007, - 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, - - 1007, 1007, 1007, 1007, 1007, 1007, 1009, 1009, 232, 1009, - 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, - 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1010, 1010, 231, - 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, - 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1011, 1011, - 225, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, - 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1012, - 1012, 224, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, - 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, - 1013, 1013, 221, 1013, 1013, 1013, 1013, 1013, 1013, 1013, - - 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, - 1013, 1014, 1014, 1014, 1014, 1014, 1014, 1014, 1014, 1014, - 1014, 1014, 1014, 220, 1014, 1014, 219, 1014, 1014, 1014, - 1014, 1014, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, - 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, - 1015, 1015, 1015, 1016, 1016, 1016, 1016, 1016, 1016, 1016, - 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, - 1016, 1016, 1016, 1016, 1017, 1017, 218, 1017, 1017, 1017, - 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, - 1017, 1017, 1017, 1017, 1017, 1018, 1018, 1018, 1018, 1018, - - 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, - 1018, 1018, 1018, 1018, 1018, 1018, 1019, 1019, 217, 1019, - 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, - 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1020, 1020, 216, - 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, - 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1021, 1021, - 215, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, - 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1022, - 1022, 214, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, - 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, - - 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, - 1023, 1023, 209, 1023, 1023, 202, 1023, 1023, 1023, 1023, - 1023, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, - 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, - 1024, 1024, 1026, 1026, 200, 1026, 1026, 1026, 1026, 1026, - 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, - 1026, 1026, 1026, 1027, 1027, 1027, 1027, 1027, 1027, 1027, - 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, - 1027, 1027, 1027, 1027, 1028, 1028, 1028, 1028, 1028, 1028, - 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, - - 1028, 199, 1028, 1028, 1028, 1029, 1029, 198, 1029, 1029, - 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, - 1029, 1029, 1029, 1029, 1029, 1029, 1030, 1030, 1030, 1030, - 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, - 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1031, 1031, 1031, - 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, - 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1032, 1032, - 1032, 1032, 1032, 196, 1032, 1032, 1032, 1032, 1032, 1032, - 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1033, - 1033, 188, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, - - 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, - 1034, 1034, 185, 1034, 1034, 1034, 1034, 1034, 1034, 1034, - 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, - 1034, 1035, 1035, 184, 1035, 1035, 1035, 1035, 1035, 1035, - 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, - 1035, 1035, 1036, 1036, 1036, 1036, 1036, 1036, 1036, 1036, - 1036, 1036, 1036, 1036, 183, 1036, 1036, 182, 1036, 1036, - 1036, 1036, 1036, 1037, 1037, 1037, 1037, 1037, 1037, 1037, - 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, - 1037, 1037, 1037, 1037, 1038, 1038, 179, 1038, 1038, 1038, - - 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, - 1038, 1038, 1038, 1038, 1038, 1039, 1039, 166, 1039, 1039, - 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, - 1039, 1039, 1039, 1039, 1039, 1039, 1040, 1040, 1040, 1040, - 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, - 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1041, 1041, 1041, - 1041, 1041, 1041, 1041, 1041, 1041, 1041, 1041, 1041, 161, - 1041, 1041, 160, 1041, 1041, 1041, 1041, 1041, 1042, 1042, - 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, - 136, 1042, 1042, 135, 1042, 1042, 1042, 1042, 1042, 1044, - - 1044, 126, 1044, 1044, 1044, 1044, 1044, 1044, 1044, 1044, - 1044, 1044, 1044, 1044, 1044, 119, 1044, 1044, 1044, 1044, - 112, 75, 73, 67, 64, 61, 58, 57, 51, 49, - 27, 12, 11, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, - 952, 952, 952, 952, 952, 952, 952, 952, 952, 952 - } ; - -extern int yy_flex_debug; -int yy_flex_debug = 0; - -static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; -static char *yy_full_match; -static int yy_lp; -static int yy_looking_for_trail_begin = 0; -static int yy_full_lp; -static int *yy_full_state; -#define YY_TRAILING_MASK 0x2000 -#define YY_TRAILING_HEAD_MASK 0x4000 -#define REJECT \ -{ \ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ -yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ -(yy_lp) = (yy_full_lp); /* restore orig. accepting pos. */ \ -(yy_state_ptr) = (yy_full_state); /* restore orig. state */ \ -yy_current_state = *(yy_state_ptr); /* restore curr. state */ \ -++(yy_lp); \ -goto find_rule; \ -} - -#define yymore() yymore_used_but_not_detected -#define YY_MORE_ADJ 0 -#define YY_RESTORE_YY_MORE_OFFSET -char *yytext; -#line 1 "lacheck.l" -/* -*- Mode: C -*- - * - * lacheck.lex - A consistency checker checker for LaTeX documents - * - * Copyright (C) 1991, 1992 Kresten Krab Thorup. - * Copyright (C) 1993 --- 1998 Per Abrahamsen. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 1, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Please send bugs, suggestions, and queries to auc-tex_mgr@sunsite.auc.dk. - * - * $Revision: 1.26 $ - * Author : Kresten Krab Thorup - * Created On : Sun May 26 18:11:58 1991 - * - * HISTORY - * 07-Mar-1998 Per Abrahamsen - * Added return to yywrap. Patch by Fabrice POPINEAU - * . - * 14-Jan-1998 Per Abrahamsen - * Added GPL blurp. - * 27-Oct-1997 Per Abrahamsen - * Count newline after newenvironment and newcommand. - * 12-Jan-1996 Per Abrahamsen - * \\} used not to end a group in definitions. Reported by Piet - * van Oostrum . - * 03-Jan-1995 Per Abrahamsen - * Fix bug which prevented detection of multiple illegal characters - * in labels. Reported by eeide@jaguar.cs.utah.edu (Eric Eide). - * 30-Jul-1994 Per Abrahamsen - * Define dummy yywrap so we no longer depend on `libl.a'. - * 26-Apr-1994 Per Abrahamsen - * Removed a few warnings, by Richard Lloyd . - * 23-Apr-1994 Per Abrahamsen - * Changed all `%i' to `%d' for VMS portability. Reported by - * Stephen Harker . - * 16-Feb-1994 Per Abrahamsen - * Try file name with `.tex' appended before trying it bare. This - * will make the case where a directory and a TeX file share the - * same name work. - * 19-Jan-1994 Per Abrahamsen - * Comments don't imply whitespace. Pointed out by Jacco van - * Ossenbruggen . - * 14-Jan-1994 Per Abrahamsen - * Don't complain about \ref at the beginning of a paragraph. - * Suggested by Jean-Marc Lasgouttes . - * 11-Jan-1994 Per Abrahamsen - * Added version string to usage message. Suggested by Uwe Bonnes - * . - * 04-Jan-1994 Per Abrahamsen - * Warn about newlines in \verb. Suggested by Mark Burton - * . The LaTeX Book agrees (p. 168). - * 10-Sep-1993 Per Abrahamsen - * Removed complain about missing ~ before \cite. Requested by - * Nelson H. F. Beebe . The LaTeX Book seems - * to agree. - * 03-Sep-1993 Per Abrahamsen - * Check for illegal characters in labels. - * 16-Aug-1993 Per Abrahamsen - * Recognize \endinput. Suggested by Stefan Farestam - * . - * 13-Aug-1993 Per Abrahamsen - * } was eaten after display math. Reported by Eckhard Rüggeberg - * . - * 13-Aug-1993 Per Abrahamsen - * Recognize \verb*. Reported by Eckhard Rüggeberg - * . - * 08-Aug-1993 Per Abrahamsen - * Better catch begin and end without arguments. - * 08-Aug-1993 Per Abrahamsen - * Removed free(NULL) as reported by Darrel R. Hankerson - * . - * 08-Aug-1993 Per Abrahamsen - * Removed declaration of realloc for some C compilers. Reported by - * Darrel R. Hankerson - * 30-Jul-1993 Per Abrahamsen - * Added check for italic correction after normal text. - * 29-Jul-1993 Per Abrahamsen - * Added cast for (char*) malloc as suggested by John Interrante - * . - * 29-Jul-1993 Per Abrahamsen - * Added check for missing and extra italic correction. - * 29-Jul-1993 Per Abrahamsen - * Made line number counting more reliable (but it still needs a rewrite)! - * 28-Jul-1993 Per Abrahamsen - * Added check for italic correction before point or comma. - * 6-Jun-1992 Kresten Krab Thorup - * Last Modified: Sat Jun 6 16:37:44 1992 #48 (Kresten Krab Thorup) - * Added test for whitespace before punctuation mark - * 17-Dec-1991 (Last Mod: Tue Dec 17 21:01:24 1991 #41) Kresten Krab Thorup - * Added 'word word` and missing ~ before cite and ref - * 18-Jun-1991 (Last Mod: Tue Jun 18 19:20:43 1991 #17) Kresten Krab Thorup - * Added check (or rather management) for \newenvironment and - * \newcommand - as suggested by Per Abrahamsen abrham@hugin.dk - * 30-May-1991 (Last Mod: Thu May 30 02:22:33 1991 #15) Kresten Krab Thorup - * Added check for `$${punct}' and `{punct}$' constructions - * 30-May-1991 (Last Mod: Wed May 29 10:31:35 1991 #6) Kresten Krab Thorup - * Improved (dynamic) stack management from Andreas Stolcke ... - * - * 26-May-1991 Kresten Krab Thorup - * Initial distribution version. - */ -#line 119 "lacheck.l" - -#include -#include - -#if defined(WIN32) && !defined(__MINGW32__) -#include -#endif -/* #include */ - -/* extern char *realloc(); */ - -#ifdef NEED_STRSTR -char *strstr(); -#endif - -#define GROUP_STACK_SIZE 10 -#define INPUT_STACK_SIZE 10 - -#define PROGNAME "LaCheck" - - /* macros */ - -#define CG_NAME gstack[gstackp-1].s_name -#define CG_TYPE gstack[gstackp-1].s_type -#define CG_LINE gstack[gstackp-1].s_line -#define CG_ITALIC gstack[gstackp-1].italic -#define CG_FILE gstack[gstackp-1].s_file - -void pop(void); -void push(const char *p_name, int p_type, int p_line); -void linecount(void); -void g_checkend(int n); -void e_checkend(int n, char *name); -void f_checkend(char *name); -void input_file(char *file_nam); -void print_bad_match(char *end_command, int type); -int check_top_level_end(char *end_command, int type); - - /* global variables */ - -int line_count = 1; -int warn_count = 0; -char *file_name; -char verb_char; - - /* the group stack */ - -typedef struct tex_group - { - char *s_name; - int s_type; - int s_line; - int italic; - char *s_file; - } tex_group; - -tex_group *gstack; -int gstack_size = GROUP_STACK_SIZE; -int gstackp = 0; - -typedef struct input_ - { - YY_BUFFER_STATE stream; - char *name; - int linenum; - } input_; - -input_ *istack; -int istack_size = INPUT_STACK_SIZE; -int istackp = 0; - -int def_count = 0; - - - -#line 2171 "lacheck.c" - -#define INITIAL 0 -#define B_ENVIRONMENT 1 -#define E_ENVIRONMENT 2 -#define VERBATIM 3 -#define INCLUDE 4 -#define MATH 5 -#define COMMENT 6 -#define VERB 7 -#define DEF 8 -#define AFTER_DISPLAY 9 -#define ENV_DEF 10 -#define ICOR 11 -#define GETICOR 12 - -#ifndef YY_NO_UNISTD_H -/* Special case for "unistd.h", since it is non-ANSI. We include it way - * down here because we want the user's section 1 to have been scanned first. - * The user has a chance to override it with an option. - */ -#include -#endif - -#ifndef YY_EXTRA_TYPE -#define YY_EXTRA_TYPE void * -#endif - -static int yy_init_globals (void ); - -/* Accessor methods to globals. - These are made visible to non-reentrant scanners for convenience. */ - -int yylex_destroy (void ); - -int yyget_debug (void ); - -void yyset_debug (int debug_flag ); - -YY_EXTRA_TYPE yyget_extra (void ); - -void yyset_extra (YY_EXTRA_TYPE user_defined ); - -FILE *yyget_in (void ); - -void yyset_in (FILE * in_str ); - -FILE *yyget_out (void ); - -void yyset_out (FILE * out_str ); - -yy_size_t yyget_leng (void ); - -char *yyget_text (void ); - -int yyget_lineno (void ); - -void yyset_lineno (int line_number ); - -/* Macros after this point can all be overridden by user definitions in - * section 1. - */ - -#ifndef YY_SKIP_YYWRAP -#ifdef __cplusplus -extern "C" int yywrap (void ); -#else -extern int yywrap (void ); -#endif -#endif - - static void yyunput (int c,char *buf_ptr ); - -#ifndef yytext_ptr -static void yy_flex_strncpy (char *,yyconst char *,int ); -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * ); -#endif - -#ifndef YY_NO_INPUT - -#ifdef __cplusplus -static int yyinput (void ); -#else -static int input (void ); -#endif - -#endif - -/* Amount of stuff to slurp up with each read. */ -#ifndef YY_READ_BUF_SIZE -#define YY_READ_BUF_SIZE 8192 -#endif - -/* Copy whatever the last rule matched to the standard output. */ -#ifndef ECHO -/* This used to be an fputs(), but since the string might contain NUL's, - * we now use fwrite(). - */ -#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) -#endif - -/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, - * is returned in "result". - */ -#ifndef YY_INPUT -#define YY_INPUT(buf,result,max_size) \ - if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ - { \ - int c = '*'; \ - size_t n; \ - for ( n = 0; n < max_size && \ - (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ - buf[n] = (char) c; \ - if ( c == '\n' ) \ - buf[n++] = (char) c; \ - if ( c == EOF && ferror( yyin ) ) \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - result = n; \ - } \ - else \ - { \ - errno=0; \ - while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ - { \ - if( errno != EINTR) \ - { \ - YY_FATAL_ERROR( "input in flex scanner failed" ); \ - break; \ - } \ - errno=0; \ - clearerr(yyin); \ - } \ - }\ -\ - -#endif - -/* No semi-colon after return; correct usage is to write "yyterminate();" - - * we don't want an extra ';' after the "return" because that will cause - * some compilers to complain about unreachable statements. - */ -#ifndef yyterminate -#define yyterminate() return YY_NULL -#endif - -/* Number of entries by which start-condition stack grows. */ -#ifndef YY_START_STACK_INCR -#define YY_START_STACK_INCR 25 -#endif - -/* Report a fatal error. */ -#ifndef YY_FATAL_ERROR -#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) -#endif - -/* end tables serialization structures and prototypes */ - -/* Default declaration of generated scanner - a define so the user can - * easily add parameters. - */ -#ifndef YY_DECL -#define YY_DECL_IS_OURS 1 - -extern int yylex (void); - -#define YY_DECL int yylex (void) -#endif /* !YY_DECL */ - -/* Code executed at the beginning of each rule, after yytext and yyleng - * have been set up. - */ -#ifndef YY_USER_ACTION -#define YY_USER_ACTION -#endif - -/* Code executed at the end of each rule. */ -#ifndef YY_BREAK -#define YY_BREAK break; -#endif - -#define YY_RULE_SETUP \ - if ( yyleng > 0 ) \ - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = \ - (yytext[yyleng - 1] == '\n'); \ - YY_USER_ACTION - -/** The main scanner function which does all the work. - */ -YY_DECL -{ - register yy_state_type yy_current_state; - register char *yy_cp, *yy_bp; - register int yy_act; - - if ( !(yy_init) ) - { - (yy_init) = 1; - -#ifdef YY_USER_INIT - YY_USER_INIT; -#endif - - /* Create the reject buffer large enough to save one state per allowed character. */ - if ( ! (yy_state_buf) ) - (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); - if ( ! (yy_state_buf) ) - YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); - - if ( ! (yy_start) ) - (yy_start) = 1; /* first start state */ - - if ( ! yyin ) - yyin = stdin; - - if ( ! yyout ) - yyout = stdout; - - if ( ! YY_CURRENT_BUFFER ) { - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_load_buffer_state( ); - } - - { -#line 237 "lacheck.l" - - -#line 2404 "lacheck.c" - - while ( 1 ) /* loops until end-of-file is reached */ - { - yy_cp = (yy_c_buf_p); - - /* Support of yytext. */ - *yy_cp = (yy_hold_char); - - /* yy_bp points to the position in yy_ch_buf of the start of - * the current run. - */ - yy_bp = yy_cp; - - yy_current_state = (yy_start); - yy_current_state += YY_AT_BOL(); - - (yy_state_ptr) = (yy_state_buf); - *(yy_state_ptr)++ = yy_current_state; - -yy_match: - do - { - register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 953 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - *(yy_state_ptr)++ = yy_current_state; - ++yy_cp; - } - while ( yy_current_state != 952 ); - -yy_find_action: - yy_current_state = *--(yy_state_ptr); - (yy_lp) = yy_accept[yy_current_state]; -find_rule: /* we branch to this label when backing up */ - for ( ; ; ) /* until we find what rule we matched */ - { - if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) - { - yy_act = yy_acclist[(yy_lp)]; - if ( yy_act & YY_TRAILING_HEAD_MASK || - (yy_looking_for_trail_begin) ) - { - if ( yy_act == (yy_looking_for_trail_begin) ) - { - (yy_looking_for_trail_begin) = 0; - yy_act &= ~YY_TRAILING_HEAD_MASK; - break; - } - } - else if ( yy_act & YY_TRAILING_MASK ) - { - (yy_looking_for_trail_begin) = yy_act & ~YY_TRAILING_MASK; - (yy_looking_for_trail_begin) |= YY_TRAILING_HEAD_MASK; - } - else - { - (yy_full_match) = yy_cp; - (yy_full_state) = (yy_state_ptr); - (yy_full_lp) = (yy_lp); - break; - } - ++(yy_lp); - goto find_rule; - } - --yy_cp; - yy_current_state = *--(yy_state_ptr); - (yy_lp) = yy_accept[yy_current_state]; - } - - YY_DO_BEFORE_ACTION; - -do_action: /* This label is used only to access EOF actions. */ - - switch ( yy_act ) - { /* beginning of action switch */ -case 1: -YY_RULE_SETUP -#line 239 "lacheck.l" -{ ; } - YY_BREAK -case 2: -YY_RULE_SETUP -#line 241 "lacheck.l" -{ ; } - YY_BREAK -case 3: -/* rule 3 can match eol */ -YY_RULE_SETUP -#line 243 "lacheck.l" -{ line_count++; } - YY_BREAK -case 4: -/* rule 4 can match eol */ -YY_RULE_SETUP -#line 245 "lacheck.l" -{ line_count++; } - YY_BREAK -case 5: -YY_RULE_SETUP -#line 247 "lacheck.l" -{ ; } - YY_BREAK -case 6: -YY_RULE_SETUP -#line 249 "lacheck.l" -{ ; } - YY_BREAK -case 7: -YY_RULE_SETUP -#line 251 "lacheck.l" -{ ; } - YY_BREAK -case 8: -/* rule 8 can match eol */ -YY_RULE_SETUP -#line 253 "lacheck.l" -{ - if (CG_TYPE != 4 && CG_TYPE != 5) { - if (!(CG_TYPE == 2 && strstr(CG_NAME, "array"))) { - printf( "\"%s\", line %d: possible unwanted space at \"{\"\n", - file_name, line_count); - ++warn_count ; - } - } - push( "{", 0, line_count); - linecount(); - } - YY_BREAK -case 9: -YY_RULE_SETUP -#line 265 "lacheck.l" -{ push( "{", 0, line_count);} - YY_BREAK -case 10: -YY_RULE_SETUP -#line 267 "lacheck.l" -{ - { - int italic = CG_ITALIC; - g_checkend(0); - if (italic && !CG_ITALIC) - BEGIN(GETICOR) ; - else - BEGIN(INITIAL); - }} - YY_BREAK -case 11: -YY_RULE_SETUP -#line 277 "lacheck.l" -{ g_checkend(0); } - YY_BREAK -case 12: -YY_RULE_SETUP -#line 279 "lacheck.l" -{ - { - if (!CG_ITALIC) - { - printf("\"%s\", line %d: you may need a \\/ before \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - BEGIN(INITIAL); - }} - YY_BREAK -case 13: -YY_RULE_SETUP -#line 290 "lacheck.l" -{ - { - if (CG_ITALIC) - { - printf("\"%s\", line %d: \\/ not needed before italic text \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - BEGIN(INITIAL); - }} - YY_BREAK -case 14: -/* rule 14 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 2); -(yy_c_buf_p) = yy_cp -= 2; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 301 "lacheck.l" -{ - { - linecount(); - if (!CG_ITALIC) - { - printf("\"%s\", line %d: \\/ not needed after non-italic text \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - }} - YY_BREAK -case 15: -/* rule 15 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 2); -(yy_c_buf_p) = yy_cp -= 2; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 312 "lacheck.l" -{ - { - linecount(); - if (!CG_ITALIC) - { - printf("\"%s\", line %d: \\/ is not needed after non-italic \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - }} - YY_BREAK -case 16: -YY_RULE_SETUP -#line 323 "lacheck.l" -{ BEGIN(INITIAL); } - YY_BREAK -case 17: -YY_RULE_SETUP -#line 325 "lacheck.l" -{ BEGIN(ICOR); } - YY_BREAK -case 18: -YY_RULE_SETUP -#line 327 "lacheck.l" -{ - { - printf("\"%s\", line %d: double \\/ found \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(ICOR); - }} - YY_BREAK -case 19: -/* rule 19 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 335 "lacheck.l" -{ CG_ITALIC = 1; } - YY_BREAK -case 20: -/* rule 20 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 12); -(yy_c_buf_p) = yy_cp = yy_bp + 12; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 337 "lacheck.l" -{ - { - if(CG_ITALIC) - BEGIN(GETICOR); - else - BEGIN(INITIAL); - CG_ITALIC = 0; - }} - YY_BREAK -case 21: -/* rule 21 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 12); -(yy_c_buf_p) = yy_cp = yy_bp + 12; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 346 "lacheck.l" -{ CG_ITALIC = 0; } - YY_BREAK -case 22: -/* rule 22 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 3); -(yy_c_buf_p) = yy_cp = yy_bp + 3; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 348 "lacheck.l" -{ - { - if(CG_ITALIC) - BEGIN(GETICOR); - else - BEGIN(INITIAL); - CG_ITALIC = !CG_ITALIC; - }} - YY_BREAK -case 23: -/* rule 23 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 3); -(yy_c_buf_p) = yy_cp = yy_bp + 3; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 357 "lacheck.l" -{ CG_ITALIC = !CG_ITALIC; } - YY_BREAK -case 24: -YY_RULE_SETUP -#line 359 "lacheck.l" -{ - { - printf("\"%s\", line %d: do not use \\/ before \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - YY_BREAK -case 25: -/* rule 25 can match eol */ -YY_RULE_SETUP -#line 367 "lacheck.l" -{ ; } - YY_BREAK -case 26: -YY_RULE_SETUP -#line 369 "lacheck.l" -{ ; } - YY_BREAK -case 27: -YY_RULE_SETUP -#line 371 "lacheck.l" -{ - { - unput(yytext[0]); - BEGIN(INITIAL); - }} - YY_BREAK -case 28: -YY_RULE_SETUP -#line 377 "lacheck.l" -BEGIN(DEF); - YY_BREAK -case 29: -YY_RULE_SETUP -#line 379 "lacheck.l" -{ ++def_count; } - YY_BREAK -case 30: -YY_RULE_SETUP -#line 381 "lacheck.l" -{ --def_count; - if(def_count == 0) - BEGIN(INITIAL); } - YY_BREAK -case 31: -YY_RULE_SETUP -#line 385 "lacheck.l" -{ ; } - YY_BREAK -case 32: -YY_RULE_SETUP -#line 387 "lacheck.l" -BEGIN(ENV_DEF); - YY_BREAK -case 33: -YY_RULE_SETUP -#line 389 "lacheck.l" -{ ++def_count; } - YY_BREAK -case 34: -YY_RULE_SETUP -#line 391 "lacheck.l" -{ --def_count; - if(def_count == 0) - BEGIN(DEF); } - YY_BREAK -case 35: -YY_RULE_SETUP -#line 395 "lacheck.l" -{ ; } - YY_BREAK -case 36: -YY_RULE_SETUP -#line 397 "lacheck.l" -{ - if(CG_TYPE == 4 || CG_TYPE == 5) - print_bad_match(yytext,4); - else - { - push( yytext, 4, line_count); - }} - YY_BREAK -case 37: -YY_RULE_SETUP -#line 405 "lacheck.l" -{ g_checkend(4); } - YY_BREAK -case 38: -YY_RULE_SETUP -#line 407 "lacheck.l" -{ - if(CG_TYPE == 4 || CG_TYPE == 5) - print_bad_match(yytext,5); - else - { - push( yytext, 5, line_count); - }} - YY_BREAK -case 39: -YY_RULE_SETUP -#line 416 "lacheck.l" -{ g_checkend(5); BEGIN(AFTER_DISPLAY);} - YY_BREAK -case 40: -YY_RULE_SETUP -#line 418 "lacheck.l" -{ - - printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed before end of displaymath\n", - file_name, line_count, yytext); - ++warn_count ; - - BEGIN(INITIAL); } - YY_BREAK -case 41: -/* rule 41 can match eol */ -YY_RULE_SETUP -#line 426 "lacheck.l" -{ unput(yytext[0]); BEGIN(INITIAL); } - YY_BREAK -case 42: -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -(yy_c_buf_p) = yy_cp = yy_bp + 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 428 "lacheck.l" -{ if (CG_TYPE == 4) - { - printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed after end of math mode\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - YY_BREAK -case 43: -YY_RULE_SETUP -#line 436 "lacheck.l" -{ - - if(CG_TYPE == 5) - print_bad_match(yytext, 4); - else - - if(CG_TYPE == 4) - { - e_checkend(4, yytext); - } - else - { - push( yytext, 4, line_count); - }} - YY_BREAK -case 44: -YY_RULE_SETUP -#line 452 "lacheck.l" -{ - - if(CG_TYPE == 4) - print_bad_match(yytext,5); - else - - if(CG_TYPE == 5) - { - e_checkend(5, yytext); - BEGIN(AFTER_DISPLAY); - } - else - { - push( yytext, 5, line_count); - }} - YY_BREAK -case 45: -/* rule 45 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 11); -(yy_c_buf_p) = yy_cp = yy_bp + 11; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 468 "lacheck.l" -{ - { - push("\\begingroup", 1, line_count); - }} - YY_BREAK -case 46: -/* rule 46 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 9); -(yy_c_buf_p) = yy_cp = yy_bp + 9; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 474 "lacheck.l" -{ - { - g_checkend(1); - }} - YY_BREAK -case 47: -YY_RULE_SETUP -#line 480 "lacheck.l" -{ BEGIN(B_ENVIRONMENT); } - YY_BREAK -case 48: -/* rule 48 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 482 "lacheck.l" -{ - { - - printf("\"%s\", line %d: {argument} missing for \\begin\n", - file_name, line_count) ; - ++warn_count; - }} - YY_BREAK -case 49: -YY_RULE_SETUP -#line 490 "lacheck.l" -{ - { - if (strcmp( yytext, "verbatim" ) == 0 ) - { - input(); - BEGIN(VERBATIM); - } - else - { - push(yytext, 2, line_count); - - if ( strcmp (yytext, "sl" ) == 0 - || strcmp (yytext, "it" ) == 0) - CG_ITALIC = 1; - else if (strcmp (yytext, "normalshape") == 0) - CG_ITALIC = 0; - else if (strcmp (yytext, "em") == 0) - CG_ITALIC = !CG_ITALIC; - - input(); - BEGIN(INITIAL); - } - }} - YY_BREAK -case 50: -YY_RULE_SETUP -#line 514 "lacheck.l" -{ BEGIN(INITIAL); } - YY_BREAK -case 51: -YY_RULE_SETUP -#line 516 "lacheck.l" -{ - printf("\"%s\", line %d: TAB character in verbatim environment\n", - file_name, line_count) ; - ++warn_count; - } - YY_BREAK -case 52: -YY_RULE_SETUP -#line 522 "lacheck.l" -{ ; } - YY_BREAK -case 53: -/* rule 53 can match eol */ -YY_RULE_SETUP -#line 524 "lacheck.l" -{ ++line_count; } - YY_BREAK -case 54: -YY_RULE_SETUP -#line 527 "lacheck.l" -{ - verb_char = yytext[yyleng-1]; - BEGIN(VERB); - } - YY_BREAK -case 55: -/* rule 55 can match eol */ -YY_RULE_SETUP -#line 532 "lacheck.l" -{ - printf("\"%s\", line %d: \\verb should not contain end of line characters\n", - file_name, line_count) ; - ++line_count; -} - YY_BREAK -case 56: -YY_RULE_SETUP -#line 538 "lacheck.l" -{ - if ( *yytext == verb_char ) - BEGIN(INITIAL); -} - YY_BREAK -case 57: -YY_RULE_SETUP -#line 544 "lacheck.l" -{ BEGIN(E_ENVIRONMENT); } - YY_BREAK -case 58: -/* rule 58 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 546 "lacheck.l" -{ - { - printf("\"%s\", line %d: {argument} missing for \\end\n", - file_name, line_count) ; - ++warn_count; - }} - YY_BREAK -case 59: -YY_RULE_SETUP -#line 554 "lacheck.l" -{ - { - e_checkend(2, yytext); - input(); - - BEGIN(INITIAL); - }} - YY_BREAK -case 60: -/* rule 60 can match eol */ -YY_RULE_SETUP -#line 563 "lacheck.l" -{ - { - linecount(); - printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", - file_name, line_count, ++yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - YY_BREAK -case 61: -/* rule 61 can match eol */ -YY_RULE_SETUP -#line 572 "lacheck.l" -{ - { - printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - YY_BREAK -case 62: -/* rule 62 can match eol */ -YY_RULE_SETUP -#line 580 "lacheck.l" -{ - { - linecount(); - printf("\"%s\", line %d: missing `\\@' before `.' in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - YY_BREAK -case 63: -/* rule 63 can match eol */ -YY_RULE_SETUP -#line 589 "lacheck.l" -{ - - printf("\"%s\", line %d: double space at \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - YY_BREAK -case 64: -/* rule 64 can match eol */ -YY_RULE_SETUP -#line 598 "lacheck.l" -{ - printf("\"%s\", line %d: \\ldots should be \\cdots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - } - YY_BREAK -case 65: -/* rule 65 can match eol */ -YY_RULE_SETUP -#line 605 "lacheck.l" -{ - printf("\"%s\", line %d: \\cdots should be \\ldots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - YY_BREAK -case 66: -/* rule 66 can match eol */ -YY_RULE_SETUP -#line 613 "lacheck.l" -{ - printf("\"%s\", line %d: Dots should be \\cdots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - } - YY_BREAK -case 67: -/* rule 67 can match eol */ -YY_RULE_SETUP -#line 620 "lacheck.l" -{ - printf("\"%s\", line %d: Dots should be \\ldots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - YY_BREAK -case 68: -YY_RULE_SETUP -#line 629 "lacheck.l" -{ - printf("\"%s\", line %d: Dots should be ellipsis \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - } - YY_BREAK -case 69: -/* rule 69 can match eol */ -YY_RULE_SETUP -#line 636 "lacheck.l" -{ - linecount(); - printf("\"%s\", line %d: bad character in label \"%s\", see C.10.2\n", - file_name, line_count, yytext); - } - YY_BREAK -case 70: -/* rule 70 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 642 "lacheck.l" -{ - linecount(); - BEGIN(INITIAL); - } - YY_BREAK -case 71: -/* rule 71 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 647 "lacheck.l" -{ - linecount(); - printf("\"%s\", line %d: perhaps you should insert a `~' before \"%s\"\n", - file_name, line_count, ++yytext); - BEGIN(INITIAL); - } - YY_BREAK -case 72: -/* rule 72 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 654 "lacheck.l" -{ - linecount(); - printf("\"%s\", line %d: whitespace before footnote in \"%s\"\n", - file_name, line_count, ++yytext); - BEGIN(INITIAL); - } - YY_BREAK -case 73: -/* rule 73 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_cp - 1); -(yy_c_buf_p) = yy_cp -= 1; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -YY_RULE_SETUP -#line 662 "lacheck.l" -{ - { - printf("\"%s\", line %d: Don't use \"%s\" in LaTeX documents\n", - file_name, line_count, yytext); - ++warn_count ; - }} - YY_BREAK -case 74: -/* rule 74 can match eol */ -YY_RULE_SETUP -#line 669 "lacheck.l" -{ linecount() ;} - YY_BREAK -case 75: -/* rule 75 can match eol */ -YY_RULE_SETUP -#line 670 "lacheck.l" -{ linecount(); } - YY_BREAK -case 76: -/* rule 76 can match eol */ -YY_RULE_SETUP -#line 672 "lacheck.l" -{ - { - linecount(); - printf("\"%s\", line %d: Fontspecifiers don't take arguments. \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - /* (void) input(); */ - BEGIN(INITIAL); - }} - YY_BREAK -case 77: -YY_RULE_SETUP -#line 682 "lacheck.l" -{ - { - printf("\"%s\", line %d: Do not use @ in LaTeX macro names. \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - }} - YY_BREAK -case 78: -/* rule 78 can match eol */ -YY_RULE_SETUP -#line 689 "lacheck.l" -{ - { - linecount(); - printf("\"%s\", line %d: Use ` to begin quotation, not ' \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - YY_BREAK -case 79: -YY_RULE_SETUP -#line 698 "lacheck.l" -{ - { - printf("\"%s\", line %d: Use ' to end quotation, not ` \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - YY_BREAK -case 80: -/* rule 80 can match eol */ -YY_RULE_SETUP -#line 707 "lacheck.l" -{ - { - printf("\"%s\", line %d: Whitespace before punctation mark in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - }} - YY_BREAK -case 81: -YY_RULE_SETUP -#line 716 "lacheck.l" -{ BEGIN(COMMENT); } - YY_BREAK -case 82: -/* rule 82 can match eol */ -YY_RULE_SETUP -#line 718 "lacheck.l" -{ BEGIN(INITIAL); ++line_count; } - YY_BREAK -case 83: -YY_RULE_SETUP -#line 720 "lacheck.l" -{ ; } - YY_BREAK -case 84: -YY_RULE_SETUP -#line 723 "lacheck.l" -{ BEGIN(INCLUDE); } - YY_BREAK -case 85: -YY_RULE_SETUP -#line 725 "lacheck.l" -{ - { - if ( strstr(yytext,".sty") == NULL ) - { - printf("** %s:\n", yytext); - input_file(yytext); - } - else - { - printf("\"%s\", line %d: Style file `%s\' omitted.\n", - file_name, - line_count, - yytext); - input(); - } - BEGIN(INITIAL); - }} - YY_BREAK -case 86: -/* rule 86 can match eol */ -*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ -YY_LINENO_REWIND_TO(yy_bp + 9); -(yy_c_buf_p) = yy_cp = yy_bp + 9; -YY_DO_BEFORE_ACTION; /* set up yytext again */ -#line 744 "lacheck.l" -YY_RULE_SETUP -case YY_STATE_EOF(INITIAL): -YY_RULE_SETUP -case YY_STATE_EOF(B_ENVIRONMENT): -YY_RULE_SETUP -case YY_STATE_EOF(E_ENVIRONMENT): -YY_RULE_SETUP -case YY_STATE_EOF(VERBATIM): -YY_RULE_SETUP -case YY_STATE_EOF(INCLUDE): -YY_RULE_SETUP -case YY_STATE_EOF(MATH): -YY_RULE_SETUP -case YY_STATE_EOF(COMMENT): -YY_RULE_SETUP -case YY_STATE_EOF(VERB): -YY_RULE_SETUP -case YY_STATE_EOF(DEF): -YY_RULE_SETUP -case YY_STATE_EOF(AFTER_DISPLAY): -YY_RULE_SETUP -case YY_STATE_EOF(ENV_DEF): -YY_RULE_SETUP -case YY_STATE_EOF(ICOR): -YY_RULE_SETUP -case YY_STATE_EOF(GETICOR): -#line 744 "lacheck.l" -{ - if (--istackp < 0) - yyterminate(); - - else - { - fclose(yyin); - f_checkend(file_name); - yy_switch_to_buffer(istack[istackp].stream); - free(file_name); - line_count = istack[istackp].linenum; - file_name = istack[istackp].name; - input(); - BEGIN(INITIAL); - } - - } - YY_BREAK -case 87: -YY_RULE_SETUP -#line 763 "lacheck.l" -{ ; } - YY_BREAK -case 88: -YY_RULE_SETUP -#line 764 "lacheck.l" -ECHO; - YY_BREAK -#line 3395 "lacheck.c" - - case YY_END_OF_BUFFER: - { - /* Amount of text matched not including the EOB char. */ - int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; - - /* Undo the effects of YY_DO_BEFORE_ACTION. */ - *yy_cp = (yy_hold_char); - YY_RESTORE_YY_MORE_OFFSET - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) - { - /* We're scanning a new file or input source. It's - * possible that this happened because the user - * just pointed yyin at a new source and called - * yylex(). If so, then we have to assure - * consistency between YY_CURRENT_BUFFER and our - * globals. Here is the right place to do so, because - * this is the first action (other than possibly a - * back-up) that will match for the new input source. - */ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; - } - - /* Note that here we test for yy_c_buf_p "<=" to the position - * of the first EOB in the buffer, since yy_c_buf_p will - * already have been incremented past the NUL character - * (since all states make transitions on EOB to the - * end-of-buffer state). Contrast this with the test - * in input(). - */ - if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - { /* This was really a NUL. */ - yy_state_type yy_next_state; - - (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - /* Okay, we're now positioned to make the NUL - * transition. We couldn't have - * yy_get_previous_state() go ahead and do it - * for us because it doesn't know how to deal - * with the possibility of jamming (and we don't - * want to build jamming into it because then it - * will run more slowly). - */ - - yy_next_state = yy_try_NUL_trans( yy_current_state ); - - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - - if ( yy_next_state ) - { - /* Consume the NUL. */ - yy_cp = ++(yy_c_buf_p); - yy_current_state = yy_next_state; - goto yy_match; - } - - else - { - yy_cp = (yy_c_buf_p); - goto yy_find_action; - } - } - - else switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_END_OF_FILE: - { - (yy_did_buffer_switch_on_eof) = 0; - - if ( yywrap( ) ) - { - /* Note: because we've taken care in - * yy_get_next_buffer() to have set up - * yytext, we can now set up - * yy_c_buf_p so that if some total - * hoser (like flex itself) wants to - * call the scanner after we return the - * YY_NULL, it'll still work - another - * YY_NULL will get returned. - */ - (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; - - yy_act = YY_STATE_EOF(YY_START); - goto do_action; - } - - else - { - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; - } - break; - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = - (yytext_ptr) + yy_amount_of_matched_text; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_match; - - case EOB_ACT_LAST_MATCH: - (yy_c_buf_p) = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; - - yy_current_state = yy_get_previous_state( ); - - yy_cp = (yy_c_buf_p); - yy_bp = (yytext_ptr) + YY_MORE_ADJ; - goto yy_find_action; - } - break; - } - - default: - YY_FATAL_ERROR( - "fatal flex scanner internal error--no action found" ); - } /* end of action switch */ - } /* end of scanning one token */ - } /* end of user's declarations */ -} /* end of yylex */ - -/* yy_get_next_buffer - try to read in a new buffer - * - * Returns a code representing an action: - * EOB_ACT_LAST_MATCH - - * EOB_ACT_CONTINUE_SCAN - continue scanning from current position - * EOB_ACT_END_OF_FILE - end of file - */ -static int yy_get_next_buffer (void) -{ - register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; - register char *source = (yytext_ptr); - register int number_to_move, i; - int ret_val; - - if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) - YY_FATAL_ERROR( - "fatal flex scanner internal error--end of buffer missed" ); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) - { /* Don't try to fill the buffer, so this is an EOF. */ - if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) - { - /* We matched a single character, the EOB, so - * treat this as a final EOF. - */ - return EOB_ACT_END_OF_FILE; - } - - else - { - /* We matched some text prior to the EOB, first - * process it. - */ - return EOB_ACT_LAST_MATCH; - } - } - - /* Try to read more data. */ - - /* First move last chars to start of buffer. */ - number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; - - for ( i = 0; i < number_to_move; ++i ) - *(dest++) = *(source++); - - if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) - /* don't do the read, it's not guaranteed to return an EOF, - * just force an EOF - */ - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; - - else - { - yy_size_t num_to_read = - YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; - - while ( num_to_read <= 0 ) - { /* Not enough room in the buffer - grow it. */ - - YY_FATAL_ERROR( -"input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); - - } - - if ( num_to_read > YY_READ_BUF_SIZE ) - num_to_read = YY_READ_BUF_SIZE; - - /* Read in more data. */ - YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), - (yy_n_chars), num_to_read ); - - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - if ( (yy_n_chars) == 0 ) - { - if ( number_to_move == YY_MORE_ADJ ) - { - ret_val = EOB_ACT_END_OF_FILE; - yyrestart(yyin ); - } - - else - { - ret_val = EOB_ACT_LAST_MATCH; - YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = - YY_BUFFER_EOF_PENDING; - } - } - - else - ret_val = EOB_ACT_CONTINUE_SCAN; - - if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { - /* Extend the array by 50%, plus the number we really need. */ - yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); - if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); - } - - (yy_n_chars) += number_to_move; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; - YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; - - (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; - - return ret_val; -} - -/* yy_get_previous_state - get the state just before the EOB char was reached */ - - static yy_state_type yy_get_previous_state (void) -{ - register yy_state_type yy_current_state; - register char *yy_cp; - - yy_current_state = (yy_start); - yy_current_state += YY_AT_BOL(); - - (yy_state_ptr) = (yy_state_buf); - *(yy_state_ptr)++ = yy_current_state; - - for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) - { - register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 953 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - *(yy_state_ptr)++ = yy_current_state; - } - - return yy_current_state; -} - -/* yy_try_NUL_trans - try to make a transition on the NUL character - * - * synopsis - * next_state = yy_try_NUL_trans( current_state ); - */ - static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) -{ - register int yy_is_jam; - - register YY_CHAR yy_c = 1; - while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) - { - yy_current_state = (int) yy_def[yy_current_state]; - if ( yy_current_state >= 953 ) - yy_c = yy_meta[(unsigned int) yy_c]; - } - yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; - yy_is_jam = (yy_current_state == 952); - if ( ! yy_is_jam ) - *(yy_state_ptr)++ = yy_current_state; - - return yy_is_jam ? 0 : yy_current_state; -} - - static void yyunput (int c, register char * yy_bp ) -{ - register char *yy_cp; - - yy_cp = (yy_c_buf_p); - - /* undo effects of setting up yytext */ - *yy_cp = (yy_hold_char); - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - { /* need to shift things up to make room */ - /* +2 for EOB chars. */ - register yy_size_t number_to_move = (yy_n_chars) + 2; - register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ - YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; - register char *source = - &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; - - while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) - *--dest = *--source; - - yy_cp += (int) (dest - source); - yy_bp += (int) (dest - source); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; - - if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) - YY_FATAL_ERROR( "flex scanner push-back overflow" ); - } - - *--yy_cp = (char) c; - - (yytext_ptr) = yy_bp; - (yy_hold_char) = *yy_cp; - (yy_c_buf_p) = yy_cp; -} - -#ifndef YY_NO_INPUT -#ifdef __cplusplus - static int yyinput (void) -#else - static int input (void) -#endif - -{ - int c; - - *(yy_c_buf_p) = (yy_hold_char); - - if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) - { - /* yy_c_buf_p now points to the character we want to return. - * If this occurs *before* the EOB characters, then it's a - * valid NUL; if not, then we've hit the end of the buffer. - */ - if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) - /* This was really a NUL. */ - *(yy_c_buf_p) = '\0'; - - else - { /* need more input */ - yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); - ++(yy_c_buf_p); - - switch ( yy_get_next_buffer( ) ) - { - case EOB_ACT_LAST_MATCH: - /* This happens because yy_g_n_b() - * sees that we've accumulated a - * token and flags that we need to - * try matching the token before - * proceeding. But for input(), - * there's no matching to consider. - * So convert the EOB_ACT_LAST_MATCH - * to EOB_ACT_END_OF_FILE. - */ - - /* Reset buffer status. */ - yyrestart(yyin ); - - /*FALLTHROUGH*/ - - case EOB_ACT_END_OF_FILE: - { - if ( yywrap( ) ) - return EOF; - - if ( ! (yy_did_buffer_switch_on_eof) ) - YY_NEW_FILE; -#ifdef __cplusplus - return yyinput(); -#else - return input(); -#endif - } - - case EOB_ACT_CONTINUE_SCAN: - (yy_c_buf_p) = (yytext_ptr) + offset; - break; - } - } - } - - c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ - *(yy_c_buf_p) = '\0'; /* preserve yytext */ - (yy_hold_char) = *++(yy_c_buf_p); - - YY_CURRENT_BUFFER_LVALUE->yy_at_bol = (c == '\n'); - - return c; -} -#endif /* ifndef YY_NO_INPUT */ - -/** Immediately switch to a different input stream. - * @param input_file A readable stream. - * - * @note This function does not reset the start condition to @c INITIAL . - */ - void yyrestart (FILE * input_file ) -{ - - if ( ! YY_CURRENT_BUFFER ){ - yyensure_buffer_stack (); - YY_CURRENT_BUFFER_LVALUE = - yy_create_buffer(yyin,YY_BUF_SIZE ); - } - - yy_init_buffer(YY_CURRENT_BUFFER,input_file ); - yy_load_buffer_state( ); -} - -/** Switch to a different input buffer. - * @param new_buffer The new input buffer. - * - */ - void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) -{ - - /* TODO. We should be able to replace this entire function body - * with - * yypop_buffer_state(); - * yypush_buffer_state(new_buffer); - */ - yyensure_buffer_stack (); - if ( YY_CURRENT_BUFFER == new_buffer ) - return; - - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - YY_CURRENT_BUFFER_LVALUE = new_buffer; - yy_load_buffer_state( ); - - /* We don't actually know whether we did this switch during - * EOF (yywrap()) processing, but the only time this flag - * is looked at is after yywrap() is called, so it's safe - * to go ahead and always set it. - */ - (yy_did_buffer_switch_on_eof) = 1; -} - -static void yy_load_buffer_state (void) -{ - (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; - (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; - yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; - (yy_hold_char) = *(yy_c_buf_p); -} - -/** Allocate and initialize an input buffer state. - * @param file A readable stream. - * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. - * - * @return the allocated buffer state. - */ - YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) -{ - YY_BUFFER_STATE b; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_buf_size = size; - - /* yy_ch_buf has to be 2 characters longer than the size given because - * we need to put in 2 end-of-buffer characters. - */ - b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); - if ( ! b->yy_ch_buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); - - b->yy_is_our_buffer = 1; - - yy_init_buffer(b,file ); - - return b; -} - -/** Destroy the buffer. - * @param b a buffer created with yy_create_buffer() - * - */ - void yy_delete_buffer (YY_BUFFER_STATE b ) -{ - - if ( ! b ) - return; - - if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ - YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; - - if ( b->yy_is_our_buffer ) - yyfree((void *) b->yy_ch_buf ); - - yyfree((void *) b ); -} - -/* Initializes or reinitializes a buffer. - * This function is sometimes called more than once on the same buffer, - * such as during a yyrestart() or at EOF. - */ - static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) - -{ - int oerrno = errno; - - yy_flush_buffer(b ); - - b->yy_input_file = file; - b->yy_fill_buffer = 1; - - /* If b is the current buffer, then yy_init_buffer was _probably_ - * called from yyrestart() or through yy_get_next_buffer. - * In that case, we don't want to reset the lineno or column. - */ - if (b != YY_CURRENT_BUFFER){ - b->yy_bs_lineno = 1; - b->yy_bs_column = 0; - } - - b->yy_is_interactive = 0; - - errno = oerrno; -} - -/** Discard all buffered characters. On the next scan, YY_INPUT will be called. - * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. - * - */ - void yy_flush_buffer (YY_BUFFER_STATE b ) -{ - if ( ! b ) - return; - - b->yy_n_chars = 0; - - /* We always need two end-of-buffer characters. The first causes - * a transition to the end-of-buffer state. The second causes - * a jam in that state. - */ - b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; - b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; - - b->yy_buf_pos = &b->yy_ch_buf[0]; - - b->yy_at_bol = 1; - b->yy_buffer_status = YY_BUFFER_NEW; - - if ( b == YY_CURRENT_BUFFER ) - yy_load_buffer_state( ); -} - -/** Pushes the new state onto the stack. The new state becomes - * the current state. This function will allocate the stack - * if necessary. - * @param new_buffer The new state. - * - */ -void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) -{ - if (new_buffer == NULL) - return; - - yyensure_buffer_stack(); - - /* This block is copied from yy_switch_to_buffer. */ - if ( YY_CURRENT_BUFFER ) - { - /* Flush out information for old buffer. */ - *(yy_c_buf_p) = (yy_hold_char); - YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); - YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); - } - - /* Only push if top exists. Otherwise, replace top. */ - if (YY_CURRENT_BUFFER) - (yy_buffer_stack_top)++; - YY_CURRENT_BUFFER_LVALUE = new_buffer; - - /* copied from yy_switch_to_buffer. */ - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; -} - -/** Removes and deletes the top of the stack, if present. - * The next element becomes the new top. - * - */ -void yypop_buffer_state (void) -{ - if (!YY_CURRENT_BUFFER) - return; - - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - if ((yy_buffer_stack_top) > 0) - --(yy_buffer_stack_top); - - if (YY_CURRENT_BUFFER) { - yy_load_buffer_state( ); - (yy_did_buffer_switch_on_eof) = 1; - } -} - -/* Allocates the stack if it does not exist. - * Guarantees space for at least one push. - */ -static void yyensure_buffer_stack (void) -{ - yy_size_t num_to_alloc; - - if (!(yy_buffer_stack)) { - - /* First allocation is just for 2 elements, since we don't know if this - * scanner will even need a stack. We use 2 instead of 1 to avoid an - * immediate realloc on the next call. - */ - num_to_alloc = 1; - (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc - (num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); - - (yy_buffer_stack_max) = num_to_alloc; - (yy_buffer_stack_top) = 0; - return; - } - - if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ - - /* Increase the buffer to prepare for a possible push. */ - int grow_size = 8 /* arbitrary grow size */; - - num_to_alloc = (yy_buffer_stack_max) + grow_size; - (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc - ((yy_buffer_stack), - num_to_alloc * sizeof(struct yy_buffer_state*) - ); - if ( ! (yy_buffer_stack) ) - YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); - - /* zero only the new slots.*/ - memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); - (yy_buffer_stack_max) = num_to_alloc; - } -} - -/** Setup the input buffer state to scan directly from a user-specified character buffer. - * @param base the character buffer - * @param size the size in bytes of the character buffer - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) -{ - YY_BUFFER_STATE b; - - if ( size < 2 || - base[size-2] != YY_END_OF_BUFFER_CHAR || - base[size-1] != YY_END_OF_BUFFER_CHAR ) - /* They forgot to leave room for the EOB's. */ - return 0; - - b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); - if ( ! b ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); - - b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ - b->yy_buf_pos = b->yy_ch_buf = base; - b->yy_is_our_buffer = 0; - b->yy_input_file = 0; - b->yy_n_chars = b->yy_buf_size; - b->yy_is_interactive = 0; - b->yy_at_bol = 1; - b->yy_fill_buffer = 0; - b->yy_buffer_status = YY_BUFFER_NEW; - - yy_switch_to_buffer(b ); - - return b; -} - -/** Setup the input buffer state to scan a string. The next call to yylex() will - * scan from a @e copy of @a str. - * @param yystr a NUL-terminated string to scan - * - * @return the newly allocated buffer state object. - * @note If you want to scan bytes that may contain NUL values, then use - * yy_scan_bytes() instead. - */ -YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) -{ - - return yy_scan_bytes(yystr,strlen(yystr) ); -} - -/** Setup the input buffer state to scan the given bytes. The next call to yylex() will - * scan from a @e copy of @a bytes. - * @param yybytes the byte buffer to scan - * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. - * - * @return the newly allocated buffer state object. - */ -YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) -{ - YY_BUFFER_STATE b; - char *buf; - yy_size_t n; - yy_size_t i; - - /* Get memory for full buffer, including space for trailing EOB's. */ - n = _yybytes_len + 2; - buf = (char *) yyalloc(n ); - if ( ! buf ) - YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); - - for ( i = 0; i < _yybytes_len; ++i ) - buf[i] = yybytes[i]; - - buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; - - b = yy_scan_buffer(buf,n ); - if ( ! b ) - YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); - - /* It's okay to grow etc. this buffer, and we should throw it - * away when we're done. - */ - b->yy_is_our_buffer = 1; - - return b; -} - -#ifndef YY_EXIT_FAILURE -#define YY_EXIT_FAILURE 2 -#endif - -static void yy_fatal_error (yyconst char* msg ) -{ - (void) fprintf( stderr, "%s\n", msg ); - exit( YY_EXIT_FAILURE ); -} - -/* Redefine yyless() so it works in section 3 code. */ - -#undef yyless -#define yyless(n) \ - do \ - { \ - /* Undo effects of setting up yytext. */ \ - int yyless_macro_arg = (n); \ - YY_LESS_LINENO(yyless_macro_arg);\ - yytext[yyleng] = (yy_hold_char); \ - (yy_c_buf_p) = yytext + yyless_macro_arg; \ - (yy_hold_char) = *(yy_c_buf_p); \ - *(yy_c_buf_p) = '\0'; \ - yyleng = yyless_macro_arg; \ - } \ - while ( 0 ) - -/* Accessor methods (get/set functions) to struct members. */ - -/** Get the current line number. - * - */ -int yyget_lineno (void) -{ - - return yylineno; -} - -/** Get the input stream. - * - */ -FILE *yyget_in (void) -{ - return yyin; -} - -/** Get the output stream. - * - */ -FILE *yyget_out (void) -{ - return yyout; -} - -/** Get the length of the current token. - * - */ -yy_size_t yyget_leng (void) -{ - return yyleng; -} - -/** Get the current token. - * - */ - -char *yyget_text (void) -{ - return yytext; -} - -/** Set the current line number. - * @param line_number - * - */ -void yyset_lineno (int line_number ) -{ - - yylineno = line_number; -} - -/** Set the input stream. This does not discard the current - * input buffer. - * @param in_str A readable stream. - * - * @see yy_switch_to_buffer - */ -void yyset_in (FILE * in_str ) -{ - yyin = in_str ; -} - -void yyset_out (FILE * out_str ) -{ - yyout = out_str ; -} - -int yyget_debug (void) -{ - return yy_flex_debug; -} - -void yyset_debug (int bdebug ) -{ - yy_flex_debug = bdebug ; -} - -static int yy_init_globals (void) -{ - /* Initialization is the same as for the non-reentrant scanner. - * This function is called from yylex_destroy(), so don't allocate here. - */ - - (yy_buffer_stack) = 0; - (yy_buffer_stack_top) = 0; - (yy_buffer_stack_max) = 0; - (yy_c_buf_p) = (char *) 0; - (yy_init) = 0; - (yy_start) = 0; - - (yy_state_buf) = 0; - (yy_state_ptr) = 0; - (yy_full_match) = 0; - (yy_lp) = 0; - -/* Defined in main.c */ -#ifdef YY_STDINIT - yyin = stdin; - yyout = stdout; -#else - yyin = (FILE *) 0; - yyout = (FILE *) 0; -#endif - - /* For future reference: Set errno on error, since we are called by - * yylex_init() - */ - return 0; -} - -/* yylex_destroy is for both reentrant and non-reentrant scanners. */ -int yylex_destroy (void) -{ - - /* Pop the buffer stack, destroying each element. */ - while(YY_CURRENT_BUFFER){ - yy_delete_buffer(YY_CURRENT_BUFFER ); - YY_CURRENT_BUFFER_LVALUE = NULL; - yypop_buffer_state(); - } - - /* Destroy the stack itself. */ - yyfree((yy_buffer_stack) ); - (yy_buffer_stack) = NULL; - - yyfree ( (yy_state_buf) ); - (yy_state_buf) = NULL; - - /* Reset the globals. This is important in a non-reentrant scanner so the next time - * yylex() is called, initialization will occur. */ - yy_init_globals( ); - - return 0; -} - -/* - * Internal utility routines. - */ - -#ifndef yytext_ptr -static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) -{ - register int i; - for ( i = 0; i < n; ++i ) - s1[i] = s2[i]; -} -#endif - -#ifdef YY_NEED_STRLEN -static int yy_flex_strlen (yyconst char * s ) -{ - register int n; - for ( n = 0; s[n]; ++n ) - ; - - return n; -} -#endif - -void *yyalloc (yy_size_t size ) -{ - return (void *) malloc( size ); -} - -void *yyrealloc (void * ptr, yy_size_t size ) -{ - /* The cast to (char *) in the following accommodates both - * implementations that use char* generic pointers, and those - * that use void* generic pointers. It works with the latter - * because both ANSI C and C++ allow castless assignment from - * any pointer type to void*, and deal with argument conversions - * as though doing an assignment. - */ - return (void *) realloc( (char *) ptr, size ); -} - -void yyfree (void * ptr ) -{ - free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ -} - -#define YYTABLES_NAME "yytables" - -#line 764 "lacheck.l" - - -int main(int argc, char *argv[]) -{ - /* allocate initial stacks */ - gstack = (tex_group *)malloc(gstack_size * sizeof(tex_group)); - istack = (input_ *)malloc(istack_size * sizeof(input_)); - if ( gstack == NULL || istack == NULL ) { - fprintf(stderr, "%s: not enough memory for stacks\n", PROGNAME); - exit(3); - } - - if(argc > 1) - { - if ( (file_name = (char*) malloc(strlen(argv[1]) + 5)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - - strcpy(file_name, argv[1]); - strcat(file_name, ".tex" ); - - if ((yyin = fopen( file_name, "r")) != NULL ) - { - push(file_name, 3, 1); - yylex(); - f_checkend(file_name); - } - else { - file_name[strlen(file_name) - 4] = '\0'; - if ((yyin = fopen( file_name, "r")) != NULL ) - { - push(file_name, 3, 1); - yylex(); - f_checkend(file_name); - } - else - fprintf(stderr, - "%s: Could not open : %s\n",PROGNAME, argv[1]); - } - } - else - { - printf("\n* %s *\n\n",PROGNAME); - printf("\t...a consistency checker for LaTeX documents.\n"); - printf("$Id: lacheck.lex,v 1.26 1998/03/07 07:46:45 abraham Exp $\n\n"); - - printf("Usage:\n\tlacheck filename[.tex] \n\n\n"); - - printf("\tFrom within Emacs:\n\n"); - printf("\tM-x compile RET lacheck filename[.tex] RET\n\n"); - printf("\tUse C-x ` to step through the messages.\n\n"); - printf("\n\tThe found context is displayed in \"double quotes\"\n\n"); - printf("Remark:\n\tAll messages are only warnings!\n\n"); - printf("\tYour document may be right even though LaCheck says "); - printf("something else.\n\n"); - } - return(0); -} - -int yywrap(void) { return 1; } - -#ifdef NEED_STRSTR -char * -strstr(string, substring) - register char *string; /* String to search. */ - char *substring; /* Substring to try to find in string. */ -{ - register char *a, *b; - - /* First scan quickly through the two strings looking for a - * single-character match. When it's found, then compare the - * rest of the substring. - */ - - b = substring; - if (*b == 0) { - return string; - } - for ( ; *string != 0; string += 1) { - if (*string != *b) { - continue; - } - a = string; - while (1) { - if (*b == 0) { - return string; - } - if (*a++ != *b++) { - break; - } - } - b = substring; - } - return (char *) 0; -} -#endif /* NEED_STRSTR */ - -void push(const char *p_name, int p_type, int p_line) -{ - if ( gstackp == gstack_size ) { /* extend stack */ - gstack_size *= 2; - gstack = (tex_group *)realloc(gstack, gstack_size * sizeof(tex_group)); - if ( gstack == NULL ) { - fprintf(stderr, "%s: stack out of memory", PROGNAME); - exit(3); - } - } - - if ( (gstack[gstackp].s_name = - (char *)malloc(strlen(p_name) + 1)) == NULL || - (gstack[gstackp].s_file = - (char *)malloc(strlen(file_name) + 1)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - - strcpy(gstack[gstackp].s_name, p_name); - gstack[gstackp].s_type = p_type; - gstack[gstackp].s_line = p_line; - gstack[gstackp].italic = ( (p_type == 4 || p_type == 5) - ? 1 - : ( gstackp - ? gstack[gstackp - 1].italic - : 0)); - strcpy(gstack[gstackp].s_file,file_name); - ++gstackp; - -} - -void input_file(char *file_nam) -{ - char *tmp_file_name; - FILE *tmp_yyin; - - if ( (tmp_file_name = (char*) malloc(strlen(file_nam) + 5)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - strcpy(tmp_file_name,file_nam); - - if (istackp == istack_size) { /* extend stack */ - istack_size *= 2; - istack = (input_ *)realloc(istack, istack_size * sizeof(input_)); - if ( istack == NULL ) { - fprintf(stderr, "%s: \\input stack out of memory\n", PROGNAME); - exit(3); - } - } - - istack[istackp].stream = YY_CURRENT_BUFFER; - istack[istackp].linenum = line_count; - istack[istackp].name = file_name; - ++istackp; - - (void) strcat(tmp_file_name, ".tex"); - if ((tmp_yyin = fopen( tmp_file_name, "r")) != NULL ) - { - yyin = tmp_yyin; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); - file_name = tmp_file_name; - push(file_name, 3, 1); - line_count = 1; - } - else { - tmp_file_name[strlen(tmp_file_name) - 4] = '\0'; - if ((tmp_yyin = fopen( tmp_file_name , "r")) != NULL ) - { - yyin = tmp_yyin; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); - file_name = tmp_file_name; - push(file_name, 3, 1); - line_count = 1; - } - else - { - --istackp; - free(tmp_file_name); - printf("\"%s\", line %d: Could not open \"%s\"\n", - file_name, - line_count, - file_nam); - input(); - } - } -} - -void pop(void) -{ - if ( gstackp == 0 ) - { - fprintf(stderr, "%s: Stack underflow\n", PROGNAME); - exit(4); - } - --gstackp; - - free(gstack[gstackp].s_name); - free(gstack[gstackp].s_file); -} - -static void print_bg_command(char *name) -{ - - switch (CG_TYPE) { - - case 2: - printf("\\begin{%s}", name); - break; - - case 3: - printf("beginning of file %s", name); - break; - - case 4: - printf("math begin %s", name); - break; - - case 5: - printf("display math begin %s", name); - break; - - default: - printf("%s", name); - - } -} - -static void print_eg_command(char *name, int type) -{ - - switch (type) { - - case 2: - printf("\\end{%s}", name); - break; - - case 3: - printf("end of file %s", name); - break; - - case 4: - printf("math end %s", name); - break; - - case 5: - printf("display math end %s", name); - break; - - default: - printf("%s", name); - break; - } -} - - -void g_checkend(int n) -{ - if ( check_top_level_end(yytext,n) == 1 ) - { - if ( CG_TYPE != n ) - print_bad_match(yytext,n); - else - pop(); - } -} - -void e_checkend(int n, char *name) -{ - if ( check_top_level_end(name,n) == 1 ) - { - if ( CG_TYPE != n || strcmp( CG_NAME, name ) != 0 ) - print_bad_match(name,n); - - pop(); - - } -} - -void f_checkend(char *name) -{ - if ( check_top_level_end(name,3) == 1 ) - { - if ( CG_TYPE != 3 || strcmp( CG_NAME, name ) != 0 ) - - while( CG_TYPE != 3 ) - { - print_bad_match(name,3); - pop(); - } - - pop(); - } -} - -void print_bad_match(char *end_command, int type) -{ - printf("\"%s\", line %d: <- unmatched \"", - file_name, - line_count); - print_eg_command(end_command, type); - printf("\"\n"); - - printf("\"%s\", line %d: -> unmatched \"", - CG_FILE, - CG_LINE); - print_bg_command(CG_NAME); - printf("\"\n"); - warn_count += 2; -} - -int check_top_level_end(char *end_command, int type) -{ - if ( gstackp == 0 ) - { - printf("\"%s\", line %d: \"", - file_name, - line_count); - print_eg_command(end_command, type); - printf("\" found at top level\n"); - ++warn_count; - return(0); - } - else - return(1); -} - -void linecount(void) -{ - int i; - for (i = 0; i < yyleng; i++) - if(yytext[i] == '\n') - line_count++; -} - - diff --git a/Build/source/texk/lacheck/lacheck-1.26/lacheck.hlp b/Build/source/texk/lacheck/lacheck-1.26/lacheck.hlp deleted file mode 100644 index b99a0e91a47..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/lacheck.hlp +++ /dev/null @@ -1,118 +0,0 @@ -1 LaCheck - -A consistency checker for LaTeX documents. - - LaCheck filename[.tex] - -2 DESCRIPTION - -LaCheck is a general purpose consistency checker for LaTeX documents. -It reads a LaTeX document and displays warning messages, if it finds -bad sequences. It should be noted, that the badness is very -subjective. LaCheck is designed to help find common mistakes in LaTeX -documents, especially those made by beginners. - -The things checked are: Mismatched groups (braces), environments and -math mode delimiters. When a mismatch is found, line numbers for -"both" start and end of the mismatch is given. The error messages -comes in pairs, one for the end match and one for the beginning, -marked with `<-' and `->' respectively. - -Bad spacing including missing a `\' after an abbreviation, missing an -`\@' before a punctuation mark in a paragraph that is ended by an -capital letter, double spaces like ` ~', bad usage of ellipsis (like -using ... instead of \ldots, or using \ldots where \cdots should be -used), missing \~ before a \cite or \ref commands, space before -footnotes, italic corrections before comma, point, or italic text, -italic correction after normal text, missing italic correction when -switching from italic to normal text, and double italic correction. - -Badly placed punctuation marks around end of math mode delimiters. -This is, pucktuation placed right after display math end or -punctuation placed right before text math end. Sequences of -whitespace followed by punctuation marks are also caught. Bad use of -quotation characters, i.e. constructs like "\'word" or "word\`" are -warned about, tabs in verbatim environments are caught, certain TeX -primitives are frowned upon, attempts to give font specifiers -arguments such as \em{text} are noted, and use of @ in LaTeX macros -are reported. - -LaCheck will read files that are input using \input or \include. Files -with suffix `.sty' are omitted, as they probably will cause LaCheck to -crash. - -2 USAGE - - LaCheck filename[.tex] - -LaCheck may be invoked from within Emacs using compile: - -To run: -"M-x compile RET lacheck RET" -, and then -"C-x `" -to parse the messages - -2 OUTPUT - -The output is UNIX-error like, and may be parsed using Emacs compile -mode. Here is a sample: - -0 -lacheck compiler - -"/usr/mef/compiler.tex", line 34: missing `\' after "etc." - -"/usr/mef/compiler.tex", line 179: double space at " ~" - -"/usr/mef/compiler.tex", line 186: <- unmatched "}" - -"/usr/mef/compiler.tex", line 181: -> unmatched "$$" -1 - -A control space `\\ ' should be inserted at line 34, to prevent an -end-of-sentence space. -Also, at line 179, the first space of the sequence " ~" should -probably be deleted. -The last two lines is an example, where the user mistyped, and -probably inserted an extra "}" somewhere. - -2 DIAGNOSTICS - -Some special cases should be explained. In cases where a sentence ends -with something that LaCheck thinks is an abbreviation an missing `\\' -error may also occur, if the following sentence begins with a -lowercase letter. - -A mismatch error may cause more to follow, due to the chosen -algorithm. In such cases just correct the "first" error and run -LaCheck again - -Braces, environments and math mode must be balanced within a file. - -LaCheck may be confused by unmatched stuff placed inside verbatim-like -environments called something else than exactly `verbatim'. - -2 FILES - -Source: TEX_DISK:[TEX.TEX__SOURCE.LACHECK] - -Executable: TEX_EXE:LACHECK.EXE - -SEE ALSO -TeX, emacs, LaTeX - -2 BUGS - -LaCheck gets confused by advanced macros, is fooled by simple macros, -can't figure out if you use a non-standard way to switch italic on or -off, does not like TeX at all, does not provide any options to turn -off specific warnings, and is at best a crude approximation. - -Ideas for improvements and bug reports are very welcome. Such should -be directed to the maintainers, their email address is -. - -2 AUTHOR -Kresten Krab Thorup with modifications by Per Abrahamsen. - diff --git a/Build/source/texk/lacheck/lacheck-1.26/lacheck.l b/Build/source/texk/lacheck/lacheck-1.26/lacheck.l deleted file mode 100644 index a345dbfbd72..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/lacheck.l +++ /dev/null @@ -1,1096 +0,0 @@ -/* -*- Mode: C -*- - * - * lacheck.lex - A consistency checker checker for LaTeX documents - * - * Copyright (C) 1991, 1992 Kresten Krab Thorup. - * Copyright (C) 1993 --- 1998 Per Abrahamsen. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 1, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Please send bugs, suggestions, and queries to auc-tex_mgr@sunsite.auc.dk. - * - * $Revision: 1.26 $ - * Author : Kresten Krab Thorup - * Created On : Sun May 26 18:11:58 1991 - * - * HISTORY - * 07-Mar-1998 Per Abrahamsen - * Added return to yywrap. Patch by Fabrice POPINEAU - * . - * 14-Jan-1998 Per Abrahamsen - * Added GPL blurp. - * 27-Oct-1997 Per Abrahamsen - * Count newline after newenvironment and newcommand. - * 12-Jan-1996 Per Abrahamsen - * \\} used not to end a group in definitions. Reported by Piet - * van Oostrum . - * 03-Jan-1995 Per Abrahamsen - * Fix bug which prevented detection of multiple illegal characters - * in labels. Reported by eeide@jaguar.cs.utah.edu (Eric Eide). - * 30-Jul-1994 Per Abrahamsen - * Define dummy yywrap so we no longer depend on `libl.a'. - * 26-Apr-1994 Per Abrahamsen - * Removed a few warnings, by Richard Lloyd . - * 23-Apr-1994 Per Abrahamsen - * Changed all `%i' to `%d' for VMS portability. Reported by - * Stephen Harker . - * 16-Feb-1994 Per Abrahamsen - * Try file name with `.tex' appended before trying it bare. This - * will make the case where a directory and a TeX file share the - * same name work. - * 19-Jan-1994 Per Abrahamsen - * Comments don't imply whitespace. Pointed out by Jacco van - * Ossenbruggen . - * 14-Jan-1994 Per Abrahamsen - * Don't complain about \ref at the beginning of a paragraph. - * Suggested by Jean-Marc Lasgouttes . - * 11-Jan-1994 Per Abrahamsen - * Added version string to usage message. Suggested by Uwe Bonnes - * . - * 04-Jan-1994 Per Abrahamsen - * Warn about newlines in \verb. Suggested by Mark Burton - * . The LaTeX Book agrees (p. 168). - * 10-Sep-1993 Per Abrahamsen - * Removed complain about missing ~ before \cite. Requested by - * Nelson H. F. Beebe . The LaTeX Book seems - * to agree. - * 03-Sep-1993 Per Abrahamsen - * Check for illegal characters in labels. - * 16-Aug-1993 Per Abrahamsen - * Recognize \endinput. Suggested by Stefan Farestam - * . - * 13-Aug-1993 Per Abrahamsen - * } was eaten after display math. Reported by Eckhard Rüggeberg - * . - * 13-Aug-1993 Per Abrahamsen - * Recognize \verb*. Reported by Eckhard Rüggeberg - * . - * 08-Aug-1993 Per Abrahamsen - * Better catch begin and end without arguments. - * 08-Aug-1993 Per Abrahamsen - * Removed free(NULL) as reported by Darrel R. Hankerson - * . - * 08-Aug-1993 Per Abrahamsen - * Removed declaration of realloc for some C compilers. Reported by - * Darrel R. Hankerson - * 30-Jul-1993 Per Abrahamsen - * Added check for italic correction after normal text. - * 29-Jul-1993 Per Abrahamsen - * Added cast for (char*) malloc as suggested by John Interrante - * . - * 29-Jul-1993 Per Abrahamsen - * Added check for missing and extra italic correction. - * 29-Jul-1993 Per Abrahamsen - * Made line number counting more reliable (but it still needs a rewrite)! - * 28-Jul-1993 Per Abrahamsen - * Added check for italic correction before point or comma. - * 6-Jun-1992 Kresten Krab Thorup - * Last Modified: Sat Jun 6 16:37:44 1992 #48 (Kresten Krab Thorup) - * Added test for whitespace before punctuation mark - * 17-Dec-1991 (Last Mod: Tue Dec 17 21:01:24 1991 #41) Kresten Krab Thorup - * Added 'word word` and missing ~ before cite and ref - * 18-Jun-1991 (Last Mod: Tue Jun 18 19:20:43 1991 #17) Kresten Krab Thorup - * Added check (or rather management) for \newenvironment and - * \newcommand - as suggested by Per Abrahamsen abrham@hugin.dk - * 30-May-1991 (Last Mod: Thu May 30 02:22:33 1991 #15) Kresten Krab Thorup - * Added check for `$${punct}' and `{punct}$' constructions - * 30-May-1991 (Last Mod: Wed May 29 10:31:35 1991 #6) Kresten Krab Thorup - * Improved (dynamic) stack management from Andreas Stolcke ... - * - * 26-May-1991 Kresten Krab Thorup - * Initial distribution version. - */ - -%option never-interactive - -%{ - -#include -#include - -#if defined(WIN32) && !defined(__MINGW32__) -#include -#endif -/* #include */ - -/* extern char *realloc(); */ - -#ifdef NEED_STRSTR -char *strstr(); -#endif - -#define GROUP_STACK_SIZE 10 -#define INPUT_STACK_SIZE 10 - -#define PROGNAME "LaCheck" - - /* macros */ - -#define CG_NAME gstack[gstackp-1].s_name -#define CG_TYPE gstack[gstackp-1].s_type -#define CG_LINE gstack[gstackp-1].s_line -#define CG_ITALIC gstack[gstackp-1].italic -#define CG_FILE gstack[gstackp-1].s_file - -void pop(void); -void push(const char *p_name, int p_type, int p_line); -void linecount(void); -void g_checkend(int n); -void e_checkend(int n, char *name); -void f_checkend(char *name); -void input_file(char *file_nam); -void print_bad_match(char *end_command, int type); -int check_top_level_end(char *end_command, int type); - - /* global variables */ - -int line_count = 1; -int warn_count = 0; -char *file_name; -char verb_char; - - /* the group stack */ - -typedef struct tex_group - { - char *s_name; - int s_type; - int s_line; - int italic; - char *s_file; - } tex_group; - -tex_group *gstack; -int gstack_size = GROUP_STACK_SIZE; -int gstackp = 0; - -typedef struct input_ - { - YY_BUFFER_STATE stream; - char *name; - int linenum; - } input_; - -input_ *istack; -int istack_size = INPUT_STACK_SIZE; -int istackp = 0; - -int def_count = 0; - -%} - -%x B_ENVIRONMENT E_ENVIRONMENT VERBATIM INCLUDE MATH COMMENT VERB DEF -%x AFTER_DISPLAY ENV_DEF ICOR GETICOR - -b_group ("{"|\\bgroup) -e_group ("}"|\\egroup) - -b_math \\\( -e_math \\\) -math \$ - -b_display \\\[ -e_display \\\] -display \$\$ - -par ([ \t]*\n[ \t]*\n[ \t\n]*) -non_par_ws ([ \t]+\n?[ \t]*|[ \t]*\n[ \t]*|[ \t]*\n?[ \t]+) - -ws [ \n\t](%[^\n]\n)* -space ({ws}|\~|\\space) -hard_space (\~|\\space) - -u_letter [A-ZÆØÅ] -l_letter [a-zæøå] -punct [\!\.\?] -atoz [a-zA-Z] -letter [A-ZÆØÅa-zæøå] - -c_bin ("-"|"+"|"\\cdot"|"\\oplus"|"\\otimes"|"\\times") -l_bin (",") - -general_abbrev {letter}+{punct} - -non_abbrev {u_letter}{u_letter}+{punct} - -italic_spec (sl|it) -normal_spec normalshape -swap_spec em -font_spec (rm|bf|{italic_spec}|tt|{swap_spec}|mediumseries|{normal_spec}) - -primitive \\(above|advance|catcode|chardef|closein|closeout|copy|count|countdef|cr|crcr|csname|delcode|dimendef|dimen|divide|expandafter|font|hskp|vskip|openout) - -symbol ("$"("\\"{atoz}+|.)"$"|"\\#"|"\\$"|"\\%"|"\\ref") - -%% - -<*>"\\\\" { ; } - -"\\\%" { ; } - -"%"[^\n]*\n { line_count++; } - -\n { line_count++; } - -"\\\{" { ; } - -"\\\}" { ; } - -"\\\$" { ; } - -"{"{ws} { - if (CG_TYPE != 4 && CG_TYPE != 5) { - if (!(CG_TYPE == 2 && strstr(CG_NAME, "array"))) { - printf( "\"%s\", line %d: possible unwanted space at \"{\"\n", - file_name, line_count); - ++warn_count ; - } - } - push( "{", 0, line_count); - linecount(); - } - -{b_group} { push( "{", 0, line_count);} - -{e_group} { - { - int italic = CG_ITALIC; - g_checkend(0); - if (italic && !CG_ITALIC) - BEGIN(GETICOR) ; - else - BEGIN(INITIAL); - }} - -{e_group} { g_checkend(0); } - -[A-Za-zæøåÆØÅ0-9;:!()]+ { - { - if (!CG_ITALIC) - { - printf("\"%s\", line %d: you may need a \\/ before \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - BEGIN(INITIAL); - }} - -[A-Za-zæøåÆØÅ0-9;:!?()`']+ { - { - if (CG_ITALIC) - { - printf("\"%s\", line %d: \\/ not needed before italic text \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - BEGIN(INITIAL); - }} - -^[A-Za-zæøåÆØÅ0-9;:!?()`',.]+{ws}*/\\\/ { - { - linecount(); - if (!CG_ITALIC) - { - printf("\"%s\", line %d: \\/ not needed after non-italic text \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - }} - -{ws}[A-Za-zæøåÆØÅ0-9;:!?()`',.]+{ws}*/\\\/ { - { - linecount(); - if (!CG_ITALIC) - { - printf("\"%s\", line %d: \\/ is not needed after non-italic \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - } - }} - -\\\/ { BEGIN(INITIAL); } - -\\\/ { BEGIN(ICOR); } - -\\\/ { - { - printf("\"%s\", line %d: double \\/ found \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(ICOR); - }} - -\\{italic_spec}/[^a-zA-Z] { CG_ITALIC = 1; } - -\\{normal_spec}/[^a-zA-Z] { - { - if(CG_ITALIC) - BEGIN(GETICOR); - else - BEGIN(INITIAL); - CG_ITALIC = 0; - }} - -\\{normal_spec}/[^a-zA-Z] { CG_ITALIC = 0; } - -\\{swap_spec}/[^a-zA-Z] { - { - if(CG_ITALIC) - BEGIN(GETICOR); - else - BEGIN(INITIAL); - CG_ITALIC = !CG_ITALIC; - }} - -\\{swap_spec}/[^a-zA-Z] { CG_ITALIC = !CG_ITALIC; } - -[,.] { - { - printf("\"%s\", line %d: do not use \\/ before \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - -{ws} { ; } - -~ { ; } - -[^\n] { - { - unput(yytext[0]); - BEGIN(INITIAL); - }} - -"\\"[exg]?(def|newcommand)[^\n\{]+ BEGIN(DEF); - -{b_group} { ++def_count; } - -{e_group} { --def_count; - if(def_count == 0) - BEGIN(INITIAL); } - -. { ; } - -"\\"newenvironment"{"[a-zA-Z]+"}"[^\n\{]+ BEGIN(ENV_DEF); - -{b_group} { ++def_count; } - -{e_group} { --def_count; - if(def_count == 0) - BEGIN(DEF); } - -. { ; } - -{b_math} { - if(CG_TYPE == 4 || CG_TYPE == 5) - print_bad_match(yytext,4); - else - { - push( yytext, 4, line_count); - }} - -{e_math} { g_checkend(4); } - -{b_display} { - if(CG_TYPE == 4 || CG_TYPE == 5) - print_bad_match(yytext,5); - else - { - push( yytext, 5, line_count); - }} - - -{e_display} { g_checkend(5); BEGIN(AFTER_DISPLAY);} - -{punct} { - - printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed before end of displaymath\n", - file_name, line_count, yytext); - ++warn_count ; - - BEGIN(INITIAL); } - -(\n|.) { unput(yytext[0]); BEGIN(INITIAL); } - -{punct}/("\$"|"\\)") { if (CG_TYPE == 4) - { - printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed after end of math mode\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - -{math} { - - if(CG_TYPE == 5) - print_bad_match(yytext, 4); - else - - if(CG_TYPE == 4) - { - e_checkend(4, yytext); - } - else - { - push( yytext, 4, line_count); - }} - - -{display} { - - if(CG_TYPE == 4) - print_bad_match(yytext,5); - else - - if(CG_TYPE == 5) - { - e_checkend(5, yytext); - BEGIN(AFTER_DISPLAY); - } - else - { - push( yytext, 5, line_count); - }} - -\\begingroup/[^a-zA-Z] { - { - push("\\begingroup", 1, line_count); - }} - - -\\endgroup/[^a-zA-Z] { - { - g_checkend(1); - }} - - -\\begin[ \t]*"{" { BEGIN(B_ENVIRONMENT); } - -\\begin[ \t]*(%[^\n]*)?/\n { - { - - printf("\"%s\", line %d: {argument} missing for \\begin\n", - file_name, line_count) ; - ++warn_count; - }} - -[^\}\n]+ { - { - if (strcmp( yytext, "verbatim" ) == 0 ) - { - input(); - BEGIN(VERBATIM); - } - else - { - push(yytext, 2, line_count); - - if ( strcmp (yytext, "sl" ) == 0 - || strcmp (yytext, "it" ) == 0) - CG_ITALIC = 1; - else if (strcmp (yytext, "normalshape") == 0) - CG_ITALIC = 0; - else if (strcmp (yytext, "em") == 0) - CG_ITALIC = !CG_ITALIC; - - input(); - BEGIN(INITIAL); - } - }} - -\\end[ \t]*\{verbatim\} { BEGIN(INITIAL); } - -\t { - printf("\"%s\", line %d: TAB character in verbatim environment\n", - file_name, line_count) ; - ++warn_count; - } - -. { ; } - -\n { ++line_count; } - - -\\verb\*?. { - verb_char = yytext[yyleng-1]; - BEGIN(VERB); - } - -\n { - printf("\"%s\", line %d: \\verb should not contain end of line characters\n", - file_name, line_count) ; - ++line_count; -} - -. { - if ( *yytext == verb_char ) - BEGIN(INITIAL); -} - - -\\end[ \t]*"{" { BEGIN(E_ENVIRONMENT); } - -\\end[ \t]*(%[^\n]*)?/\n { - { - printf("\"%s\", line %d: {argument} missing for \\end\n", - file_name, line_count) ; - ++warn_count; - }} - - -[^\}\n]+ { - { - e_checkend(2, yytext); - input(); - - BEGIN(INITIAL); - }} - - -{ws}({letter}".")*{letter}*{l_letter}"."/{non_par_ws}+{l_letter} { - { - linecount(); - printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", - file_name, line_count, ++yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - -({l_letter}".")*{letter}*{l_letter}"."/{non_par_ws}+{l_letter} { - { - printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - -{non_abbrev}/{non_par_ws}{u_letter} { - { - linecount(); - printf("\"%s\", line %d: missing `\\@' before `.' in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count ; - BEGIN(INITIAL); - }} - -({hard_space}{space}|{space}{hard_space}) { - - printf("\"%s\", line %d: double space at \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - -{c_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?\\ldots{ws}?(\\(\.|\,|\;|\:))*{ws}?{c_bin} { - printf("\"%s\", line %d: \\ldots should be \\cdots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - } - -[^\\]{l_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?\\cdots{ws}?(\\(\.|\,|\;|\:))*{ws}?[^\\]{l_bin} { - printf("\"%s\", line %d: \\cdots should be \\ldots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - -{c_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?"."+{ws}?(\\(\.|\,|\;|\:))*{ws}?{c_bin} { - printf("\"%s\", line %d: Dots should be \\cdots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - } - -[^\\]{l_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?"."+{ws}?(\\(\.|\,|\;|\:))*{ws}?[^\\]{l_bin} { - printf("\"%s\", line %d: Dots should be \\ldots in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - } - - -\.\.\. { - printf("\"%s\", line %d: Dots should be ellipsis \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - } - -\\label\{[^#$%^&*+={\~"<>\n\t }]*[#$%^&*+={\~"<>\n\t ][^%}]*\} { - linecount(); - printf("\"%s\", line %d: bad character in label \"%s\", see C.10.2\n", - file_name, line_count, yytext); - } - -{par}"\\"ref/[^A-Za-z] { - linecount(); - BEGIN(INITIAL); - } - -{ws}"\\"ref/[^A-Za-z] { - linecount(); - printf("\"%s\", line %d: perhaps you should insert a `~' before \"%s\"\n", - file_name, line_count, ++yytext); - BEGIN(INITIAL); - } - -{ws}"\\"footnote/[^A-Za-z] { - linecount(); - printf("\"%s\", line %d: whitespace before footnote in \"%s\"\n", - file_name, line_count, ++yytext); - BEGIN(INITIAL); - } - - -{primitive}/[^a-zA-Z] { - { - printf("\"%s\", line %d: Don't use \"%s\" in LaTeX documents\n", - file_name, line_count, yytext); - ++warn_count ; - }} - -\\left{ws}*\\?. { linecount() ;} -\\right{ws}*\\?. { linecount(); } - -[^\{]\\{font_spec}/[ \t]*"{" { - { - linecount(); - printf("\"%s\", line %d: Fontspecifiers don't take arguments. \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - /* (void) input(); */ - BEGIN(INITIAL); - }} - -\\([a-zA-Z\@]+\@[a-zA-Z\@]*|[a-zA-Z\@]*\@[a-zA-Z\@]+) { - { - printf("\"%s\", line %d: Do not use @ in LaTeX macro names. \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - }} - -{ws}"'"+{letter}+ { - { - linecount(); - printf("\"%s\", line %d: Use ` to begin quotation, not ' \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - -{letter}+"`" { - { - printf("\"%s\", line %d: Use ' to end quotation, not ` \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - BEGIN(INITIAL); - }} - - -{ws}+{punct} { - { - printf("\"%s\", line %d: Whitespace before punctation mark in \"%s\"\n", - file_name, line_count, yytext); - ++warn_count; - linecount(); - BEGIN(INITIAL); - }} - -"%" { BEGIN(COMMENT); } - -\n { BEGIN(INITIAL); ++line_count; } - -. { ; } - - -\\(input|include)([ \t]|"{") { BEGIN(INCLUDE); } - -[^\}\n]+ { - { - if ( strstr(yytext,".sty") == NULL ) - { - printf("** %s:\n", yytext); - input_file(yytext); - } - else - { - printf("\"%s\", line %d: Style file `%s\' omitted.\n", - file_name, - line_count, - yytext); - input(); - } - BEGIN(INITIAL); - }} - -\\endinput/[^A-Za-z] | -<> { - if (--istackp < 0) - yyterminate(); - - else - { - fclose(yyin); - f_checkend(file_name); - yy_switch_to_buffer(istack[istackp].stream); - free(file_name); - line_count = istack[istackp].linenum; - file_name = istack[istackp].name; - input(); - BEGIN(INITIAL); - } - - } - - -. { ; } -%% -int main(int argc, char *argv[]) -{ - /* allocate initial stacks */ - gstack = (tex_group *)malloc(gstack_size * sizeof(tex_group)); - istack = (input_ *)malloc(istack_size * sizeof(input_)); - if ( gstack == NULL || istack == NULL ) { - fprintf(stderr, "%s: not enough memory for stacks\n", PROGNAME); - exit(3); - } - - if(argc > 1) - { - if ( (file_name = (char*) malloc(strlen(argv[1]) + 5)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - - strcpy(file_name, argv[1]); - strcat(file_name, ".tex" ); - - if ((yyin = fopen( file_name, "r")) != NULL ) - { - push(file_name, 3, 1); - yylex(); - f_checkend(file_name); - } - else { - file_name[strlen(file_name) - 4] = '\0'; - if ((yyin = fopen( file_name, "r")) != NULL ) - { - push(file_name, 3, 1); - yylex(); - f_checkend(file_name); - } - else - fprintf(stderr, - "%s: Could not open : %s\n",PROGNAME, argv[1]); - } - } - else - { - printf("\n* %s *\n\n",PROGNAME); - printf("\t...a consistency checker for LaTeX documents.\n"); - printf("$Id: lacheck.lex,v 1.26 1998/03/07 07:46:45 abraham Exp $\n\n"); - - printf("Usage:\n\tlacheck filename[.tex] \n\n\n"); - - printf("\tFrom within Emacs:\n\n"); - printf("\tM-x compile RET lacheck filename[.tex] RET\n\n"); - printf("\tUse C-x ` to step through the messages.\n\n"); - printf("\n\tThe found context is displayed in \"double quotes\"\n\n"); - printf("Remark:\n\tAll messages are only warnings!\n\n"); - printf("\tYour document may be right even though LaCheck says "); - printf("something else.\n\n"); - } - return(0); -} - -int yywrap(void) { return 1; } - -#ifdef NEED_STRSTR -char * -strstr(string, substring) - register char *string; /* String to search. */ - char *substring; /* Substring to try to find in string. */ -{ - register char *a, *b; - - /* First scan quickly through the two strings looking for a - * single-character match. When it's found, then compare the - * rest of the substring. - */ - - b = substring; - if (*b == 0) { - return string; - } - for ( ; *string != 0; string += 1) { - if (*string != *b) { - continue; - } - a = string; - while (1) { - if (*b == 0) { - return string; - } - if (*a++ != *b++) { - break; - } - } - b = substring; - } - return (char *) 0; -} -#endif /* NEED_STRSTR */ - -void push(const char *p_name, int p_type, int p_line) -{ - if ( gstackp == gstack_size ) { /* extend stack */ - gstack_size *= 2; - gstack = (tex_group *)realloc(gstack, gstack_size * sizeof(tex_group)); - if ( gstack == NULL ) { - fprintf(stderr, "%s: stack out of memory", PROGNAME); - exit(3); - } - } - - if ( (gstack[gstackp].s_name = - (char *)malloc(strlen(p_name) + 1)) == NULL || - (gstack[gstackp].s_file = - (char *)malloc(strlen(file_name) + 1)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - - strcpy(gstack[gstackp].s_name, p_name); - gstack[gstackp].s_type = p_type; - gstack[gstackp].s_line = p_line; - gstack[gstackp].italic = ( (p_type == 4 || p_type == 5) - ? 1 - : ( gstackp - ? gstack[gstackp - 1].italic - : 0)); - strcpy(gstack[gstackp].s_file,file_name); - ++gstackp; - -} - -void input_file(char *file_nam) -{ - char *tmp_file_name; - FILE *tmp_yyin; - - if ( (tmp_file_name = (char*) malloc(strlen(file_nam) + 5)) == NULL ) { - fprintf(stderr, "%s: out of memory\n", PROGNAME); - exit(3); - } - strcpy(tmp_file_name,file_nam); - - if (istackp == istack_size) { /* extend stack */ - istack_size *= 2; - istack = (input_ *)realloc(istack, istack_size * sizeof(input_)); - if ( istack == NULL ) { - fprintf(stderr, "%s: \\input stack out of memory\n", PROGNAME); - exit(3); - } - } - - istack[istackp].stream = YY_CURRENT_BUFFER; - istack[istackp].linenum = line_count; - istack[istackp].name = file_name; - ++istackp; - - (void) strcat(tmp_file_name, ".tex"); - if ((tmp_yyin = fopen( tmp_file_name, "r")) != NULL ) - { - yyin = tmp_yyin; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); - file_name = tmp_file_name; - push(file_name, 3, 1); - line_count = 1; - } - else { - tmp_file_name[strlen(tmp_file_name) - 4] = '\0'; - if ((tmp_yyin = fopen( tmp_file_name , "r")) != NULL ) - { - yyin = tmp_yyin; - yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); - file_name = tmp_file_name; - push(file_name, 3, 1); - line_count = 1; - } - else - { - --istackp; - free(tmp_file_name); - printf("\"%s\", line %d: Could not open \"%s\"\n", - file_name, - line_count, - file_nam); - input(); - } - } -} - -void pop(void) -{ - if ( gstackp == 0 ) - { - fprintf(stderr, "%s: Stack underflow\n", PROGNAME); - exit(4); - } - --gstackp; - - free(gstack[gstackp].s_name); - free(gstack[gstackp].s_file); -} - -static void print_bg_command(char *name) -{ - - switch (CG_TYPE) { - - case 2: - printf("\\begin{%s}", name); - break; - - case 3: - printf("beginning of file %s", name); - break; - - case 4: - printf("math begin %s", name); - break; - - case 5: - printf("display math begin %s", name); - break; - - default: - printf("%s", name); - - } -} - -static void print_eg_command(char *name, int type) -{ - - switch (type) { - - case 2: - printf("\\end{%s}", name); - break; - - case 3: - printf("end of file %s", name); - break; - - case 4: - printf("math end %s", name); - break; - - case 5: - printf("display math end %s", name); - break; - - default: - printf("%s", name); - break; - } -} - - -void g_checkend(int n) -{ - if ( check_top_level_end(yytext,n) == 1 ) - { - if ( CG_TYPE != n ) - print_bad_match(yytext,n); - else - pop(); - } -} - -void e_checkend(int n, char *name) -{ - if ( check_top_level_end(name,n) == 1 ) - { - if ( CG_TYPE != n || strcmp( CG_NAME, name ) != 0 ) - print_bad_match(name,n); - - pop(); - - } -} - -void f_checkend(char *name) -{ - if ( check_top_level_end(name,3) == 1 ) - { - if ( CG_TYPE != 3 || strcmp( CG_NAME, name ) != 0 ) - - while( CG_TYPE != 3 ) - { - print_bad_match(name,3); - pop(); - } - - pop(); - } -} - -void print_bad_match(char *end_command, int type) -{ - printf("\"%s\", line %d: <- unmatched \"", - file_name, - line_count); - print_eg_command(end_command, type); - printf("\"\n"); - - printf("\"%s\", line %d: -> unmatched \"", - CG_FILE, - CG_LINE); - print_bg_command(CG_NAME); - printf("\"\n"); - warn_count += 2; -} - -int check_top_level_end(char *end_command, int type) -{ - if ( gstackp == 0 ) - { - printf("\"%s\", line %d: \"", - file_name, - line_count); - print_eg_command(end_command, type); - printf("\" found at top level\n"); - ++warn_count; - return(0); - } - else - return(1); -} - -void linecount(void) -{ - int i; - for (i = 0; i < yyleng; i++) - if(yytext[i] == '\n') - line_count++; -} - diff --git a/Build/source/texk/lacheck/lacheck-1.26/lacheck.man b/Build/source/texk/lacheck/lacheck-1.26/lacheck.man deleted file mode 100644 index 66c818f9aad..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/lacheck.man +++ /dev/null @@ -1,110 +0,0 @@ -.TH "LaCheck" "1" "2010-12-10" "%%LACHECKREV%%" -.SH NAME -lacheck - A consistency checker for LaTeX documents. -.SH SYNOPSIS -.B lacheck -.IR filename [ \fB.tex\fP ] -.SH DESCRIPTION -LaCheck is a general purpose consistency checker for LaTeX documents. -It reads a LaTeX document and displays warning messages, if it finds -bad sequences. It should be noted, that the badness is -.I very -subjective. LaCheck is designed to help find common mistakes in LaTeX -documents, especially those made by beginners. -.LP -The things checked are: -.LP -Mismatched groups (braces), environments and math mode -delimiters. When a mismatch is found, line numbers for -.I "both" -start and end of the mismatch is given. The error messages comes in -pairs, one for the end match and one for the beginning, marked with -\`<-\' and \`->\' respectively. -.LP -Bad spacing including missing a \`\\ \' after an abbreviation, missing -an \`\\@\' before a punctuation mark in a paragraph that is ended by -an capital letter, double spaces like \` \~\', bad usage of ellipsis -(like using ... instead of \\ldots, or using \\ldots where \\cdots -should be used), missing \~ before a \\cite or \\ref commands, space -before footnotes, italic corrections before comma, point, or italic -text, italic correction after normal text, missing italic correction -when switching from italic to normal text, and double italic -correction. -.LP -Badly placed punctuation marks around end of math mode -delimiters. This is, punctuation placed right after display math end -or punctuation placed right before text math end. Sequences of -whitespace followed by punctuation marks are also caught. -.LP -Bad use of quotation characters, i.e. constructs like "\'word" or -"word\`" are warned about, tabs in verbatim environments are caught, -certain TeX primitives are frowned upon, attempts to give font -specifiers arguments such as \\em{text} are noted, and use of @ in -LaTeX macros are reported. -.LP -LaCheck will read files that are input using \\input or \\include. -Files with suffix \`.sty\' are omitted, as they probably will cause -LaCheck to crash. -.LP -LaCheck may be invoked from within Emacs(1) using compile: - -To run: -.B "M-x compile RET lacheck RET" -, and then -.B "C-x `" -to parse the messages - -.SH OUTPUT -The output is UNIX-error like, and may be parsed using Emacs(1) -compile mode. Here is a sample: - -.PD 0 -lacheck compiler -.TP -"/usr/mef/compiler.tex", line 34: missing \`\\\\\\\\ \' after "etc." -.TP -"/usr/mef/compiler.tex", line 179: double space at " ~" -.TP -"/usr/mef/compiler.tex", line 186: <- unmatched "}" -.TP -"/usr/mef/compiler.tex", line 181: -> unmatched "$$" -.PD 1 -.LP -A control space \`\\ \' should be inserted at line 34, to prevent an -end-of-sentence space. -Also, at line 179, the first space of the sequence " ~" should -probably be deleted. -The last two lines is an example, where the user mistyped, and -probably inserted an extra "}" somewhere. - -.SH DIAGNOSTICS -Some special cases should be explained. In cases where a sentence ends -with something that LaCheck thinks is an abbreviation an missing \`\\ -\' error may also occur, if the following sentence begins with a -lowercase letter. -.LP -A mismatch error may cause more to follow, due to the chosen -algorithm. In such cases just correct the -.I "first" -error and run LaCheck again -.LP -Braces, environments and math mode must be balanced within a file. -.LP -LaCheck may be confused by unmatched stuff placed inside verbatim-like -environments called something else than exactly \`verbatim\'. -.SH FILES -%%LACHECKPATH%% -.SH SEE ALSO -tex(1), emacs(1), latex(1) -.SH BUGS -LaCheck gets confused by advanced macros, is fooled by simple macros, -can't figure out if you use a non-standard way to switch italic on or -off, does not like TeX at all, does not provide any options to turn -off specific warnings, and is at best a crude approximation. -.LP -Ideas for improvements and bug reports are very welcome. Such -should be directed to the maintainers, their email address is -. -.SH AUTHOR -Kresten Krab Thorup with modifications by Per Abrahamsen. - diff --git a/Build/source/texk/lacheck/lacheck-1.26/make_vms.com b/Build/source/texk/lacheck/lacheck-1.26/make_vms.com deleted file mode 100644 index 24d224733a0..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/make_vms.com +++ /dev/null @@ -1,16 +0,0 @@ -$ if f$trnlnm("sys_arch").eqs."ALPHA" -$ then -$ CC :== CC/NoList/opt=level=4/standard=vaxc -$ else -$ CC :==gcc/Nostandard/NoCase_Hack/NoList -$ endif -$ LINK :== Link/NoMap -$ CC lacheck.c -$ if f$trnlnm("sys_arch").eqs."ALPHA" -$ then -$ LINK lacheck.obj -$ else -$ LINK lacheck.obj,gnu_cc:[000000]GCCLIB/LIB, sys$share:vaxcrtl/opt -$ endif -$ Library/Help/Create=Blocks:10 lacheck.hlb lacheck.hlp -$ EXIT diff --git a/Build/source/texk/lacheck/lacheck-1.26/test.old b/Build/source/texk/lacheck/lacheck-1.26/test.old deleted file mode 100644 index 015686391c0..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/test.old +++ /dev/null @@ -1,33 +0,0 @@ -"./test.tex", line 3: possible unwanted space at "{" -"./test.tex", line 4: you may need a \/ before "world" -"./test.tex", line 5: \/ not needed before italic text "world" -"./test.tex", line 6: \/ not needed after non-italic text "hello" -"./test.tex", line 7: double \/ found "\/" -"./test.tex", line 8: do not use \/ before "," -"./test.tex", line 9: punctuation mark "." should be placed before end of displaymath -"./test.tex", line 10: punctuation mark "." should be placed after end of math mode -"./test.tex", line 11: {argument} missing for \begin -"./test.tex", line 13: TAB character in verbatim environment -"./test.tex", line 15: {argument} missing for \end -"./test.tex", line 16: missing `\ ' after "a.k.a." -"./test.tex", line 17: missing `\@' before `.' in "HELLO." -"./test.tex", line 18: double space at "~ " -"./test.tex", line 19: \ldots should be \cdots in "+ \ldots +" -"./test.tex", line 20: \cdots should be \ldots in " , \cdots ," -"./test.tex", line 21: Dots should be \cdots in "+ .. +" -"./test.tex", line 22: Dots should be \ldots in " , .. ," -"./test.tex", line 23: Dots should be ellipsis "..." -"./test.tex", line 24: bad character in label "\label{hello evil world}", see C.10.2 -"./test.tex", line 25: perhaps you should insert a `~' before "\ref" -"./test.tex", line 26: whitespace before footnote in "\footnote" -"./test.tex", line 27: Don't use "\above" in LaTeX documents -"./test.tex", line 28: Fontspecifiers don't take arguments. " \rm" -"./test.tex", line 29: Do not use @ in LaTeX macro names. "\hello@world" -"./test.tex", line 30: Use ` to begin quotation, not ' " ''world" -"./test.tex", line 31: Use ' to end quotation, not ` "hello`" -"./test.tex", line 32: Whitespace before punctation mark in " ." -"./test.tex", line 34: <- unmatched "display math end \]" -"./test.tex", line 33: -> unmatched "math begin \(" -"./test.tex", line 35: \verb should not contain end of line characters -"./test.tex", line 43: <- unmatched "end of file ./test.tex" -"./test.tex", line 33: -> unmatched "math begin \(" diff --git a/Build/source/texk/lacheck/lacheck-1.26/test.tex b/Build/source/texk/lacheck/lacheck-1.26/test.tex deleted file mode 100644 index 98b18c1e3b5..00000000000 --- a/Build/source/texk/lacheck/lacheck-1.26/test.tex +++ /dev/null @@ -1,42 +0,0 @@ -% $Revision: 1.4 $ - -{ } % Unwanted space after `{' -{\em hello} world % May need `\/' before `world' -{\em hello\/ world}. % `\/' not needed before `world' -hello\/ world % `\/' not needed after `hello' -{\em hello\/}\/ world % Double `\/' -{\em hello\/}, world % `\/' before `,' or `.' -\[display math\]. % Punctuation mark after end of display math -$math.$ % Punctuation mark before end of math mode -\begin % Missing argument for \begin -\begin{verbatim} -TAB TAB % Tab in verbatim -\end{verbatim} -\end % Missing argument for \end -a.k.a. world % Missing `\ ' after abbreviation -HELLO. World % Missing `\@' before `.' -hello~ world % Double space -$ + \ldots + $ % Should be \cdots -$ , \cdots , $ % Should be \ldots -$ + .. + $ % Should be \cdots -$ , .. , $ % Should be \ldots -hello world... % Should be ellipsis -\label{hello evil world} % Bad character in label -Hello \ref{world} % Missing ~ -Hello \footnote{world} % Whitespace before footnote -\above % Primitive in LaTeX -hello \rm{world} % Font specifier with argument -\hello@world % @ in LaTeX macro name -hello ''world'' % Quote begined with ' -``hello`` world % Quote ended with ` -world . % Whitespace before punctuation mark -\(hello -world\] % Bad match -\verb|hello -world| % multi-line \verb - -% Local Variables: -% mode: LaTeX -% TeX-master: t -% TeX-auto-update: nil -% End: diff --git a/Build/source/texk/lacheck/lacheck.test b/Build/source/texk/lacheck/lacheck.test deleted file mode 100755 index 21b1d5ed0e9..00000000000 --- a/Build/source/texk/lacheck/lacheck.test +++ /dev/null @@ -1,10 +0,0 @@ -#! /bin/sh - -# Copyright (C) 2009, 2010 Peter Breitenlohner -# You may freely use, modify and/or distribute this file. - -./lacheck $srcdir/$LACHECK_TREE/test.tex | \ - sed -e "s!$srcdir/$LACHECK_TREE/test.tex!./test.tex!g" >test.out || exit 1 - -diff $srcdir/$LACHECK_TREE/test.old test.out || exit 1 - diff --git a/Build/source/utils/Makefile.in b/Build/source/utils/Makefile.in index 17e82c6f1bc..8371ecb361e 100644 --- a/Build/source/utils/Makefile.in +++ b/Build/source/utils/Makefile.in @@ -122,6 +122,7 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../m4/kpse-zziplib-flags.m4 \ $(top_srcdir)/../version.ac \ $(top_srcdir)/../utils/devnag/ac/withenable.ac \ + $(top_srcdir)/../utils/lacheck/ac/withenable.ac \ $(top_srcdir)/../utils/m-tx/ac/withenable.ac \ $(top_srcdir)/../utils/pmx/ac/withenable.ac \ $(top_srcdir)/../utils/ps2eps/ac/withenable.ac \ @@ -155,7 +156,6 @@ am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-cairo-flags.m4 \ $(top_srcdir)/../texk/dvisvgm/ac/dvisvgm.ac \ $(top_srcdir)/../texk/dvisvgm/ac/libgs.ac \ $(top_srcdir)/../texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/../texk/lacheck/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/withenable.ac \ $(top_srcdir)/../texk/lcdf-typetools/ac/lcdf-typetools.ac \ $(top_srcdir)/../texk/makeindexk/ac/withenable.ac \ diff --git a/Build/source/utils/README b/Build/source/utils/README index 97e54519ef7..83ba79021ea 100644 --- a/Build/source/utils/README +++ b/Build/source/utils/README @@ -11,6 +11,8 @@ asymptote 2.31 - checked 17may14 devnag - from devanagari package installed in texmf-dist. +lacheck - maintained here, by us + m-tx 0.60d - checked 16apr12 http://mirror.ctan.org/support/m-tx/ diff --git a/Build/source/utils/configure b/Build/source/utils/configure index b0d12631b38..35f1cf3889a 100755 --- a/Build/source/utils/configure +++ b/Build/source/utils/configure @@ -697,6 +697,7 @@ enable_multiplatform enable_cxx_runtime_hack enable_libtool_hack enable_devnag +enable_lacheck enable_m_tx enable_pmx enable_ps2eps @@ -777,7 +778,6 @@ with_system_libgs with_libgs_includes with_libgs_libdir enable_gsftopk -enable_lacheck enable_lcdf_typetools enable_cfftot1 enable_mmafm @@ -862,6 +862,7 @@ LDFLAGS LIBS CPPFLAGS' ac_subdirs_all='devnag +lacheck m-tx pmx ps2eps @@ -1498,6 +1499,7 @@ Optional Features: --enable-cxx-runtime-hack link C++ runtime statically --enable-libtool-hack ignore libtool dependency_libs --disable-devnag do not build the devnag package + --disable-lacheck do not build the lacheck package --disable-m-tx do not build the m-tx package --disable-pmx do not build the pmx package --disable-ps2eps do not build the ps2eps package @@ -1571,7 +1573,6 @@ Optional Features: --disable-dvipsk do not build the dvipsk package --disable-dvisvgm do not build the dvisvgm package --disable-gsftopk do not build the gsftopk package - --disable-lacheck do not build the lacheck package --disable-lcdf-typetools do not build the lcdf-typetools package --disable-cfftot1 do not build the cfftot1 program @@ -3390,6 +3391,24 @@ $as_echo "$as_me: Assuming \`--enable-devnag=$enable_devnag'" >&6;} ;; esac +## utils/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/lacheck/ +## configure options and TL libraries required for lacheck +# Check whether --enable-lacheck was given. +if test "${enable_lacheck+set}" = set; then : + enableval=$enable_lacheck; +fi +case $enable_lacheck in #( + yes|no) : + ;; #( + *) : + + enable_lacheck=$enable_all_pkgs + { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 +$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} + ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" + ;; +esac + ## utils/m-tx/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/m-tx/ ## configure options and TL libraries required for mtx # Check whether --enable-m-tx was given. @@ -4414,24 +4433,6 @@ test "x$enable_gsftopk" = xno || { need_kpathsea=yes } -## texk/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lacheck/ -## configure options and TL libraries required for lacheck -# Check whether --enable-lacheck was given. -if test "${enable_lacheck+set}" = set; then : - enableval=$enable_lacheck; -fi -case $enable_lacheck in #( - yes|no) : - ;; #( - *) : - - enable_lacheck=$enable_all_pkgs - { $as_echo "$as_me:${as_lineno-$LINENO}: Assuming \`--enable-lacheck=$enable_lacheck'" >&5 -$as_echo "$as_me: Assuming \`--enable-lacheck=$enable_lacheck'" >&6;} - ac_configure_args="$ac_configure_args '--enable-lacheck=$enable_lacheck'" - ;; -esac - ## texk/lcdf-typetools/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory texk/lcdf-typetools/ ## configure options and TL libraries required for lcdf-typetools # Check whether --enable-lcdf-typetools was given. @@ -6362,6 +6363,14 @@ if test -x $srcdir/devnag/configure; then fi fi +if test -x $srcdir/lacheck/configure; then + test "x$enable_lacheck" = xyes && MAKE_SUBDIRS="$MAKE_SUBDIRS lacheck" + CONF_SUBDIRS="$CONF_SUBDIRS lacheck" + if false; then + subdirs="$subdirs lacheck" + + fi +fi if test -x $srcdir/m-tx/configure; then test "x$enable_m_tx" = xyes && MAKE_SUBDIRS="$MAKE_SUBDIRS m-tx" CONF_SUBDIRS="$CONF_SUBDIRS m-tx" diff --git a/Build/source/utils/lacheck/ChangeLog b/Build/source/utils/lacheck/ChangeLog new file mode 100644 index 00000000000..84f8e8d1888 --- /dev/null +++ b/Build/source/utils/lacheck/ChangeLog @@ -0,0 +1,92 @@ +2014-12-14 Peter Breitenlohner + + Version 1.28, now maintained here, by us. + * Makefile.am, configure.ac: Reorganized. + +2014-06-16 Peter Breitenlohner + + * Makefile.am: Drop the obsolete ACLOCAL_AMFLAGS. + +2013-01-29 Peter Breitenlohner + + * Makefile.am, configure.ac: Allow subdir-objects. + +2012-12-17 Peter Breitenlohner + + * Makefile.am: Enable silent rules. + +2012-06-22 Peter Breitenlohner + + * lacheck.l: Avoid buffer overrun for long pathnames + (detected by Ken Brown ). + +2012-06-19 Peter Breitenlohner + + * lacheck.l: Added the never-interactive option to prevent + flex from creating a problematic prototype for isatty(). + +2010-12-10 Peter Breitenlohner + + * lacheck.l: Define yywrap() after flex-provided prototype. + + * lacheck.man: Formatting. Avoid use of build date. + +2010-02-20 Peter Breitenlohner + + * lacheck.l: Do not #include for MinGW32. + +2009-08-25 Peter Breitenlohner + + Avoid maximal compiler warnings. + * lacheck.l (push): Change param1 from 'unsigned char *' to + 'const char *'. + (struct tex_group): Change member s_name from 'unsigned char *' + to 'char *' and drop or adjust casts accordingly. + +2009-06-16 Peter Breitenlohner + + * Makefile.am: lacheck.l provides yywrap, no need for $(LEXLIB). + +2009-06-12 Peter Breitenlohner + + * Makefile.am (AM_CFLAGS): enable compiler warnings. + * configure.ac: use AC_PROG_LEX instead of KPSE_PROG_LEX + because 'flex -l' produces bad code (at least with flex-2.5.35). + + * lacheck.l: use ANSI C prototypes for all functions. + declare yywrap as static. + (g_checkend): add explict braces to avoid ambiguous `else'. + +2009-04-20 Peter Breitenlohner + + Adapt to TL2009 build system. + +2008-02-29 Peter Breitenlohner + + * configure.in: added AC_CONFIG_HEADERS (moved + from ../kpathsea/common.ac to here). + +2008-02-22 Peter Breitenlohner + + * configure.in: remove AC_DECL_YYTEXT to avoid autoconf warning. + +2008-01-30 Peter Breitenlohner + + Convert from autoconf-2.13 to autoconf-2.59+: + * Makefile.in: Add @configure_input@ line. + * aclocal.m4 (new): Generated (aclocal -I ../m4). + * configure: Regenerated (autoconf). + +Sun Mar 8 20:43:31 1998 Sebastian Rahtz + + * lacheck.lex: to version 1.26 from master source + +Tue Jan 27 14:32:25 1998 Sebastian Rahtz + + * configure etc: new configure.in, c-auto.in, Makefile.in from + Olaf Weber + +Tue Jan 27 13:57:52 1998 Sebastian Rahtz + + * Makefile.in: depend inclusion + diff --git a/Build/source/utils/lacheck/Makefile.am b/Build/source/utils/lacheck/Makefile.am new file mode 100644 index 00000000000..8b1a7d16ced --- /dev/null +++ b/Build/source/utils/lacheck/Makefile.am @@ -0,0 +1,23 @@ +## Makefile.am for the TeX Live subdirectory utils/lacheck/ +## +## Copyright (C) 2009-2014 Peter Breitenlohner +## You may freely use, modify and/or distribute this file. +## +AM_CFLAGS = $(WARNING_CFLAGS) + +bin_PROGRAMS = lacheck + +lacheck_SOURCES = lacheck.l + +## Manpage +nodist_man1_MANS = lacheck.1 + +## Test +TESTS = lacheck.test +dist_check_SCRIPTS = $(TESTS) +EXTRA_DIST = test.old test.tex +CLEANFILES = test.out + +## Not used +EXTRA_DIST += lacheck.hlp make_vms.com + diff --git a/Build/source/utils/lacheck/Makefile.in b/Build/source/utils/lacheck/Makefile.in new file mode 100644 index 00000000000..6bb3bc9d927 --- /dev/null +++ b/Build/source/utils/lacheck/Makefile.in @@ -0,0 +1,1184 @@ +# Makefile.in generated by automake 1.14.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2013 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +bin_PROGRAMS = lacheck$(EXEEXT) +subdir = . +DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ + $(top_srcdir)/configure $(am__configure_deps) \ + $(srcdir)/config.h.in $(srcdir)/lacheck.man lacheck.c \ + $(dist_check_SCRIPTS) $(top_srcdir)/../../build-aux/depcomp \ + $(top_srcdir)/../../build-aux/ylwrap \ + $(top_srcdir)/../../build-aux/test-driver ChangeLog \ + ../../build-aux/compile ../../build-aux/config.guess \ + ../../build-aux/config.sub ../../build-aux/depcomp \ + ../../build-aux/install-sh ../../build-aux/missing \ + ../../build-aux/texinfo.tex ../../build-aux/ylwrap \ + ../../build-aux/ltmain.sh \ + $(top_srcdir)/../../build-aux/compile \ + $(top_srcdir)/../../build-aux/install-sh \ + $(top_srcdir)/../../build-aux/missing +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \ + $(top_srcdir)/../../m4/kpse-warnings.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = lacheck.1 +CONFIG_CLEAN_VPATH_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" +PROGRAMS = $(bin_PROGRAMS) +am_lacheck_OBJECTS = lacheck.$(OBJEXT) +lacheck_OBJECTS = $(am_lacheck_OBJECTS) +lacheck_LDADD = $(LDADD) +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/../../build-aux/depcomp +am__depfiles_maybe = depfiles +am__mv = mv -f +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +AM_V_CC = $(am__v_CC_@AM_V@) +am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) +am__v_CC_0 = @echo " CC " $@; +am__v_CC_1 = +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ +AM_V_CCLD = $(am__v_CCLD_@AM_V@) +am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) +am__v_CCLD_0 = @echo " CCLD " $@; +am__v_CCLD_1 = +@MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ || +LEXCOMPILE = $(LEX) $(AM_LFLAGS) $(LFLAGS) +AM_V_LEX = $(am__v_LEX_@AM_V@) +am__v_LEX_ = $(am__v_LEX_@AM_DEFAULT_V@) +am__v_LEX_0 = @echo " LEX " $@; +am__v_LEX_1 = +YLWRAP = $(top_srcdir)/../../build-aux/ylwrap +SOURCES = $(lacheck_SOURCES) +DIST_SOURCES = $(lacheck_SOURCES) +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +man1dir = $(mandir)/man1 +NROFF = nroff +MANS = $(nodist_man1_MANS) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ + $(LISP)config.h.in +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +AM_RECURSIVE_TARGETS = cscope check recheck +am__tty_colors_dummy = \ + mgn= red= grn= lgn= blu= brg= std=; \ + am__color_tests=no +am__tty_colors = { \ + $(am__tty_colors_dummy); \ + if test "X$(AM_COLOR_TESTS)" = Xno; then \ + am__color_tests=no; \ + elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ + am__color_tests=yes; \ + elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ + am__color_tests=yes; \ + fi; \ + if test $$am__color_tests = yes; then \ + red=''; \ + grn=''; \ + lgn=''; \ + blu=''; \ + mgn=''; \ + brg=''; \ + std=''; \ + fi; \ +} +am__recheck_rx = ^[ ]*:recheck:[ ]* +am__global_test_result_rx = ^[ ]*:global-test-result:[ ]* +am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]* +# A command that, given a newline-separated list of test names on the +# standard input, print the name of the tests that are to be re-run +# upon "make recheck". +am__list_recheck_tests = $(AWK) '{ \ + recheck = 1; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + { \ + if ((getline line2 < ($$0 ".log")) < 0) \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ + { \ + recheck = 0; \ + break; \ + } \ + else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ + { \ + break; \ + } \ + }; \ + if (recheck) \ + print $$0; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# A command that, given a newline-separated list of test names on the +# standard input, create the global log from their .trs and .log files. +am__create_global_log = $(AWK) ' \ +function fatal(msg) \ +{ \ + print "fatal: making $@: " msg | "cat >&2"; \ + exit 1; \ +} \ +function rst_section(header) \ +{ \ + print header; \ + len = length(header); \ + for (i = 1; i <= len; i = i + 1) \ + printf "="; \ + printf "\n\n"; \ +} \ +{ \ + copy_in_global_log = 1; \ + global_test_result = "RUN"; \ + while ((rc = (getline line < ($$0 ".trs"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".trs"); \ + if (line ~ /$(am__global_test_result_rx)/) \ + { \ + sub("$(am__global_test_result_rx)", "", line); \ + sub("[ ]*$$", "", line); \ + global_test_result = line; \ + } \ + else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ + copy_in_global_log = 0; \ + }; \ + if (copy_in_global_log) \ + { \ + rst_section(global_test_result ": " $$0); \ + while ((rc = (getline line < ($$0 ".log"))) != 0) \ + { \ + if (rc < 0) \ + fatal("failed to read from " $$0 ".log"); \ + print line; \ + }; \ + printf "\n"; \ + }; \ + close ($$0 ".trs"); \ + close ($$0 ".log"); \ +}' +# Restructured Text title. +am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; } +# Solaris 10 'make', and several other traditional 'make' implementations, +# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it +# by disabling -e (using the XSI extension "set +e") if it's set. +am__sh_e_setup = case $$- in *e*) set +e;; esac +# Default flags passed to test drivers. +am__common_driver_flags = \ + --color-tests "$$am__color_tests" \ + --enable-hard-errors "$$am__enable_hard_errors" \ + --expect-failure "$$am__expect_failure" +# To be inserted before the command running the test. Creates the +# directory for the log if needed. Stores in $dir the directory +# containing $f, in $tst the test, in $log the log. Executes the +# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and +# passes TESTS_ENVIRONMENT. Set up options for the wrapper that +# will run the test scripts (or their associated LOG_COMPILER, if +# thy have one). +am__check_pre = \ +$(am__sh_e_setup); \ +$(am__vpath_adj_setup) $(am__vpath_adj) \ +$(am__tty_colors); \ +srcdir=$(srcdir); export srcdir; \ +case "$@" in \ + */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \ + *) am__odir=.;; \ +esac; \ +test "x$$am__odir" = x"." || test -d "$$am__odir" \ + || $(MKDIR_P) "$$am__odir" || exit $$?; \ +if test -f "./$$f"; then dir=./; \ +elif test -f "$$f"; then dir=; \ +else dir="$(srcdir)/"; fi; \ +tst=$$dir$$f; log='$@'; \ +if test -n '$(DISABLE_HARD_ERRORS)'; then \ + am__enable_hard_errors=no; \ +else \ + am__enable_hard_errors=yes; \ +fi; \ +case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \ + am__expect_failure=yes;; \ + *) \ + am__expect_failure=no;; \ +esac; \ +$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) +# A shell command to get the names of the tests scripts with any registered +# extension removed (i.e., equivalently, the names of the test logs, with +# the '.log' extension removed). The result is saved in the shell variable +# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, +# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", +# since that might cause problem with VPATH rewrites for suffix-less tests. +# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. +am__set_TESTS_bases = \ + bases='$(TEST_LOGS)'; \ + bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \ + bases=`echo $$bases` +RECHECK_LOGS = $(TEST_LOGS) +TEST_SUITE_LOG = test-suite.log +TEST_EXTENSIONS = @EXEEXT@ .test +am__test_logs1 = $(TESTS:=.log) +am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log) +TEST_LOGS = $(am__test_logs2:.test.log=.log) +TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/../../build-aux/test-driver +TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \ + $(TEST_LOG_FLAGS) +am__set_b = \ + case '$@' in \ + */*) \ + case '$*' in \ + */*) b='$*';; \ + *) b=`echo '$@' | sed 's/\.log$$//'`; \ + esac;; \ + *) \ + b='$*';; \ + esac +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +DIST_TARGETS = dist-gzip +distuninstallcheck_listfiles = find . -type f -print +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +REV = @REV@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +WARNING_CFLAGS = @WARNING_CFLAGS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AM_CFLAGS = $(WARNING_CFLAGS) +lacheck_SOURCES = lacheck.l +nodist_man1_MANS = lacheck.1 +TESTS = lacheck.test +dist_check_SCRIPTS = $(TESTS) +EXTRA_DIST = test.old test.tex lacheck.hlp make_vms.com +CLEANFILES = test.out +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .l .log .o .obj .test .test$(EXEEXT) .trs +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +config.h: stamp-h1 + @test -f $@ || rm -f stamp-h1 + @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +lacheck.1: $(top_builddir)/config.status $(srcdir)/lacheck.man + cd $(top_builddir) && $(SHELL) ./config.status $@ +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ + fi; \ + for p in $$list; do echo "$$p $$p"; done | \ + sed 's/$(EXEEXT)$$//' | \ + while read p p1; do if test -f $$p \ + ; then echo "$$p"; echo "$$p"; else :; fi; \ + done | \ + sed -e 'p;s,.*/,,;n;h' \ + -e 's|.*|.|' \ + -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ + sed 'N;N;N;s,\n, ,g' | \ + $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ + { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ + if ($$2 == $$4) files[d] = files[d] " " $$1; \ + else { print "f", $$3 "/" $$4, $$1; } } \ + END { for (d in files) print "f", d, files[d] }' | \ + while read type dir files; do \ + if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ + test -z "$$files" || { \ + echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ + $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ + } \ + ; done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ + files=`for p in $$list; do echo "$$p"; done | \ + sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ + -e 's/$$/$(EXEEXT)/' \ + `; \ + test -n "$$list" || exit 0; \ + echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(bindir)" && rm -f $$files + +clean-binPROGRAMS: + -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) + +lacheck$(EXEEXT): $(lacheck_OBJECTS) $(lacheck_DEPENDENCIES) $(EXTRA_lacheck_DEPENDENCIES) + @rm -f lacheck$(EXEEXT) + $(AM_V_CCLD)$(LINK) $(lacheck_OBJECTS) $(lacheck_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lacheck.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ +@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< + +.c.obj: +@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ +@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` + +.l.c: + $(AM_V_LEX)$(am__skiplex) $(SHELL) $(YLWRAP) $< $(LEX_OUTPUT_ROOT).c $@ -- $(LEXCOMPILE) +install-man1: $(nodist_man1_MANS) + @$(NORMAL_INSTALL) + @list1='$(nodist_man1_MANS)'; \ + list2=''; \ + test -n "$(man1dir)" \ + && test -n "`echo $$list1$$list2`" \ + || exit 0; \ + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ + { for i in $$list1; do echo "$$i"; done; \ + if test -n "$$list2"; then \ + for i in $$list2; do echo "$$i"; done \ + | sed -n '/\.1[a-z]*$$/p'; \ + fi; \ + } | while read p; do \ + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; echo "$$p"; \ + done | \ + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ + sed 'N;N;s,\n, ,g' | { \ + list=; while read file base inst; do \ + if test "$$base" = "$$inst"; then list="$$list $$file"; else \ + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ + fi; \ + done; \ + for i in $$list; do echo "$$i"; done | $(am__base_list) | \ + while read files; do \ + test -z "$$files" || { \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ + done; } + +uninstall-man1: + @$(NORMAL_UNINSTALL) + @list='$(nodist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \ + files=`{ for i in $$list; do echo "$$i"; done; \ + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-am +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-am + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-am + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +# Recover from deleted '.trs' file; this should ensure that +# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create +# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells +# to avoid problems with "make -n". +.log.trs: + rm -f $< $@ + $(MAKE) $(AM_MAKEFLAGS) $< + +# Leading 'am--fnord' is there to ensure the list of targets does not +# expand to empty, as could happen e.g. with make check TESTS=''. +am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) +am--force-recheck: + @: + +$(TEST_SUITE_LOG): $(TEST_LOGS) + @$(am__set_TESTS_bases); \ + am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ + redo_bases=`for i in $$bases; do \ + am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \ + done`; \ + if test -n "$$redo_bases"; then \ + redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ + redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ + if $(am__make_dryrun); then :; else \ + rm -f $$redo_logs && rm -f $$redo_results || exit 1; \ + fi; \ + fi; \ + if test -n "$$am__remaking_logs"; then \ + echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ + "recursion detected" >&2; \ + else \ + am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ + fi; \ + if $(am__make_dryrun); then :; else \ + st=0; \ + errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ + for i in $$redo_bases; do \ + test -f $$i.trs && test -r $$i.trs \ + || { echo "$$errmsg $$i.trs" >&2; st=1; }; \ + test -f $$i.log && test -r $$i.log \ + || { echo "$$errmsg $$i.log" >&2; st=1; }; \ + done; \ + test $$st -eq 0 || exit 1; \ + fi + @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ + ws='[ ]'; \ + results=`for b in $$bases; do echo $$b.trs; done`; \ + test -n "$$results" || results=/dev/null; \ + all=` grep "^$$ws*:test-result:" $$results | wc -l`; \ + pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \ + fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \ + skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \ + xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \ + xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \ + error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \ + if test `expr $$fail + $$xpass + $$error` -eq 0; then \ + success=true; \ + else \ + success=false; \ + fi; \ + br='==================='; br=$$br$$br$$br$$br; \ + result_count () \ + { \ + if test x"$$1" = x"--maybe-color"; then \ + maybe_colorize=yes; \ + elif test x"$$1" = x"--no-color"; then \ + maybe_colorize=no; \ + else \ + echo "$@: invalid 'result_count' usage" >&2; exit 4; \ + fi; \ + shift; \ + desc=$$1 count=$$2; \ + if test $$maybe_colorize = yes && test $$count -gt 0; then \ + color_start=$$3 color_end=$$std; \ + else \ + color_start= color_end=; \ + fi; \ + echo "$${color_start}# $$desc $$count$${color_end}"; \ + }; \ + create_testsuite_report () \ + { \ + result_count $$1 "TOTAL:" $$all "$$brg"; \ + result_count $$1 "PASS: " $$pass "$$grn"; \ + result_count $$1 "SKIP: " $$skip "$$blu"; \ + result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ + result_count $$1 "FAIL: " $$fail "$$red"; \ + result_count $$1 "XPASS:" $$xpass "$$red"; \ + result_count $$1 "ERROR:" $$error "$$mgn"; \ + }; \ + { \ + echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \ + $(am__rst_title); \ + create_testsuite_report --no-color; \ + echo; \ + echo ".. contents:: :depth: 2"; \ + echo; \ + for b in $$bases; do echo $$b; done \ + | $(am__create_global_log); \ + } >$(TEST_SUITE_LOG).tmp || exit 1; \ + mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ + if $$success; then \ + col="$$grn"; \ + else \ + col="$$red"; \ + test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \ + fi; \ + echo "$${col}$$br$${std}"; \ + echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ + echo "$${col}$$br$${std}"; \ + create_testsuite_report --maybe-color; \ + echo "$$col$$br$$std"; \ + if $$success; then :; else \ + echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ + if test -n "$(PACKAGE_BUGREPORT)"; then \ + echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ + fi; \ + echo "$$col$$br$$std"; \ + fi; \ + $$success || exit 1 + +check-TESTS: + @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list + @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + trs_list=`for i in $$bases; do echo $$i.trs; done`; \ + log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ + exit $$?; +recheck: all $(dist_check_SCRIPTS) + @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + @set +e; $(am__set_TESTS_bases); \ + bases=`for i in $$bases; do echo $$i; done \ + | $(am__list_recheck_tests)` || exit 1; \ + log_list=`for i in $$bases; do echo $$i.log; done`; \ + log_list=`echo $$log_list`; \ + $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ + am__force_recheck=am--force-recheck \ + TEST_LOGS="$$log_list"; \ + exit $$? +.test.log: + @p='$<'; \ + $(am__set_b); \ + $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ + --log-file $$b.log --trs-file $$b.trs \ + $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ + "$$tst" $(AM_TESTS_FD_REDIRECT) +@am__EXEEXT_TRUE@.test$(EXEEXT).log: +@am__EXEEXT_TRUE@ @p='$<'; \ +@am__EXEEXT_TRUE@ $(am__set_b); \ +@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \ +@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \ +@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ +@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) + +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build \ + && ../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) $(dist_check_SCRIPTS) + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(PROGRAMS) $(MANS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS) + -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs) + -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) + +clean-generic: + -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." + -rm -f lacheck.c +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-man + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: install-man1 + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS uninstall-man + +uninstall-man: uninstall-man1 + +.MAKE: all check-am install-am install-strip + +.PHONY: CTAGS GTAGS TAGS all all-am am--refresh check check-TESTS \ + check-am clean clean-binPROGRAMS clean-cscope clean-generic \ + cscope cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ + dist-gzip dist-lzip dist-shar dist-tarZ dist-xz dist-zip \ + distcheck distclean distclean-compile distclean-generic \ + distclean-hdr distclean-tags distcleancheck distdir \ + distuninstallcheck dvi dvi-am html html-am info info-am \ + install install-am install-binPROGRAMS install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-man1 install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-compile \ + mostlyclean-generic pdf pdf-am ps ps-am recheck tags tags-am \ + uninstall uninstall-am uninstall-binPROGRAMS uninstall-man \ + uninstall-man1 + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/utils/lacheck/ac/withenable.ac b/Build/source/utils/lacheck/ac/withenable.ac new file mode 100644 index 00000000000..dd3bad47a97 --- /dev/null +++ b/Build/source/utils/lacheck/ac/withenable.ac @@ -0,0 +1,7 @@ +## utils/lacheck/ac/withenable.ac: configure.ac fragment for the TeX Live subdirectory utils/lacheck/ +dnl +dnl Copyright (C) 2009 Peter Breitenlohner +dnl You may freely use, modify and/or distribute this file. +dnl +## configure options and TL libraries required for lacheck +KPSE_ENABLE_PROG([lacheck]) diff --git a/Build/source/utils/lacheck/aclocal.m4 b/Build/source/utils/lacheck/aclocal.m4 new file mode 100644 index 00000000000..7788d8b5d0a --- /dev/null +++ b/Build/source/utils/lacheck/aclocal.m4 @@ -0,0 +1,1187 @@ +# generated automatically by aclocal 1.14.1 -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. + +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],, +[m4_warning([this file was generated for autoconf 2.69. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically 'autoreconf'.])]) + +# Copyright (C) 2002-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.14' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.14.1], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.14.1])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to +# '$srcdir', '$srcdir/..', or '$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is '.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ([2.52])dnl + m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +m4_define([_AM_COND_VALUE_$1], [$2])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +m4_if([$1], [CC], [depcc="$CC" am_compiler_list=], + [$1], [CXX], [depcc="$CXX" am_compiler_list=], + [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'], + [$1], [UPC], [depcc="$UPC" am_compiler_list=], + [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + am__universal=false + m4_case([$1], [CC], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac], + [CXX], + [case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac]) + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES. +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE([dependency-tracking], [dnl +AS_HELP_STRING( + [--enable-dependency-tracking], + [do not reject slow dependency extractors]) +AS_HELP_STRING( + [--disable-dependency-tracking], + [speeds up one-time build])]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +AC_SUBST([am__nodep])dnl +_AM_SUBST_NOTMAKE([am__nodep])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[{ + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each '.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O. +m4_define([AC_PROG_CC], +m4_defn([AC_PROG_CC]) +[_AM_PROG_CC_C_O +]) + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.65])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[AC_DIAGNOSE([obsolete], + [$0: two- and three-arguments forms are deprecated.]) +m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if( + m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]), + [ok:ok],, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package]) + AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) +AM_MISSING_PROG([AUTOCONF], [autoconf]) +AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) +AM_MISSING_PROG([AUTOHEADER], [autoheader]) +AM_MISSING_PROG([MAKEINFO], [makeinfo]) +AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +AC_SUBST([mkdir_p], ['$(MKDIR_P)']) +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES([CC])], + [m4_define([AC_PROG_CC], + m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES([CXX])], + [m4_define([AC_PROG_CXX], + m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES([OBJC])], + [m4_define([AC_PROG_OBJC], + m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJCXX], + [_AM_DEPENDENCIES([OBJCXX])], + [m4_define([AC_PROG_OBJCXX], + m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl +]) +AC_REQUIRE([AM_SILENT_RULES])dnl +dnl The testsuite driver may need to know about EXEEXT, so add the +dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This +dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below. +AC_CONFIG_COMMANDS_PRE(dnl +[m4_provide_if([_AM_COMPILER_EXEEXT], + [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + AC_MSG_ERROR([Your 'rm' program is bad, sorry.]) + fi +fi]) + +dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not +dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further +dnl mangled by Autoconf and run in a shell conditional statement. +m4_define([_AC_COMPILER_EXEEXT], +m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi +AC_SUBST([install_sh])]) + +# Copyright (C) 2003-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAINTAINER_MODE([DEFAULT-MODE]) +# ---------------------------------- +# Control maintainer-specific portions of Makefiles. +# Default is to disable them, unless 'enable' is passed literally. +# For symmetry, 'disable' may be passed as well. Anyway, the user +# can override the default with the --enable/--disable switch. +AC_DEFUN([AM_MAINTAINER_MODE], +[m4_case(m4_default([$1], [disable]), + [enable], [m4_define([am_maintainer_other], [disable])], + [disable], [m4_define([am_maintainer_other], [enable])], + [m4_define([am_maintainer_other], [enable]) + m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])]) +AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode's default is 'disable' unless 'enable' is passed + AC_ARG_ENABLE([maintainer-mode], + [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode], + am_maintainer_other[ make rules and dependencies not useful + (and sometimes confusing) to the casual installer])], + [USE_MAINTAINER_MODE=$enableval], + [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes])) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST([MAINT])dnl +] +) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it is modern enough. +# If it is, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + AC_MSG_WARN(['missing' script is too old or missing]) +fi +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# -------------------- +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), [1])]) + +# _AM_SET_OPTIONS(OPTIONS) +# ------------------------ +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Copyright (C) 1999-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_CC_C_O +# --------------- +# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC +# to automatically call this. +AC_DEFUN([_AM_PROG_CC_C_O], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([compile])dnl +AC_LANG_PUSH([C])dnl +AC_CACHE_CHECK( + [whether $CC understands -c and -o together], + [am_cv_prog_cc_c_o], + [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])]) + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i]) +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +AC_LANG_POP([C])]) + +# For backward compatibility. +AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_RUN_LOG(COMMAND) +# ------------------- +# Run COMMAND, save the exit status in ac_status, and log it. +# (This has been adapted from Autoconf's _AC_RUN_LOG macro.) +AC_DEFUN([AM_RUN_LOG], +[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD + ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + (exit $ac_status); }]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[[\\\"\#\$\&\'\`$am_lf]]*) + AC_MSG_ERROR([unsafe absolute working directory name]);; +esac +case $srcdir in + *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) + AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken + alias in your environment]) + fi + if test "$[2]" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT([yes]) +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi +AC_CONFIG_COMMANDS_PRE( + [AC_MSG_CHECKING([that generated files are newer than configure]) + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + AC_MSG_RESULT([done])]) +rm -f conftest.file +]) + +# Copyright (C) 2009-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_SILENT_RULES([DEFAULT]) +# -------------------------- +# Enable less verbose build rules; with the default set to DEFAULT +# ("yes" being less verbose, "no" or empty being verbose). +AC_DEFUN([AM_SILENT_RULES], +[AC_ARG_ENABLE([silent-rules], [dnl +AS_HELP_STRING( + [--enable-silent-rules], + [less verbose build output (undo: "make V=1")]) +AS_HELP_STRING( + [--disable-silent-rules], + [verbose build output (undo: "make V=0")])dnl +]) +case $enable_silent_rules in @%:@ ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; +esac +dnl +dnl A few 'make' implementations (e.g., NonStop OS and NextStep) +dnl do not support nested variable expansions. +dnl See automake bug#9928 and bug#10237. +am_make=${MAKE-make} +AC_CACHE_CHECK([whether $am_make supports nested variables], + [am_cv_make_support_nested_variables], + [if AS_ECHO([['TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi]) +if test $am_cv_make_support_nested_variables = yes; then + dnl Using '$V' instead of '$(V)' breaks IRIX make. + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AC_SUBST([AM_V])dnl +AM_SUBST_NOTMAKE([AM_V])dnl +AC_SUBST([AM_DEFAULT_V])dnl +AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl +AC_SUBST([AM_DEFAULT_VERBOSITY])dnl +AM_BACKSLASH='\' +AC_SUBST([AM_BACKSLASH])dnl +_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl +]) + +# Copyright (C) 2001-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor 'install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in "make install-strip", and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be 'maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# AM_SUBST_NOTMAKE(VARIABLE) +# -------------------------- +# Public sister of _AM_SUBST_NOTMAKE. +AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004-2013 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of 'v7', 'ustar', or 'pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +# +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AC_SUBST([AMTAR], ['$${TAR-tar}']) + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' + +m4_if([$1], [v7], + [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'], + + [m4_case([$1], + [ustar], + [# The POSIX 1988 'ustar' format is defined with fixed-size fields. + # There is notably a 21 bits limit for the UID and the GID. In fact, + # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343 + # and bug#13588). + am_max_uid=2097151 # 2^21 - 1 + am_max_gid=$am_max_uid + # The $UID and $GID variables are not portable, so we need to resort + # to the POSIX-mandated id(1) utility. Errors in the 'id' calls + # below are definitely unexpected, so allow the users to see them + # (that is, avoid stderr redirection). + am_uid=`id -u || echo unknown` + am_gid=`id -g || echo unknown` + AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format]) + if test $am_uid -le $am_max_uid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi + AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format]) + if test $am_gid -le $am_max_gid; then + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + _am_tools=none + fi], + + [pax], + [], + + [m4_fatal([Unknown tar format])]) + + AC_MSG_CHECKING([how to create a $1 tar archive]) + + # Go ahead even if we have the value already cached. We do so because we + # need to set the values for the 'am__tar' and 'am__untar' variables. + _am_tools=${am_cv_prog_tar_$1-$_am_tools} + + for _am_tool in $_am_tools; do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works. + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar /dev/null 2>&1 && break + fi + done + rm -rf conftest.dir + + AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) + AC_MSG_RESULT([$am_cv_prog_tar_$1])]) + +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([../../m4/kpse-common.m4]) +m4_include([../../m4/kpse-warnings.m4]) diff --git a/Build/source/utils/lacheck/config.h.in b/Build/source/utils/lacheck/config.h.in new file mode 100644 index 00000000000..73ad02d6bf8 --- /dev/null +++ b/Build/source/utils/lacheck/config.h.in @@ -0,0 +1,29 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the home page for this package. */ +#undef PACKAGE_URL + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Version number of package */ +#undef VERSION + +/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a + `char[]'. */ +#undef YYTEXT_POINTER diff --git a/Build/source/utils/lacheck/configure b/Build/source/utils/lacheck/configure new file mode 100755 index 00000000000..944bff53fbb --- /dev/null +++ b/Build/source/utils/lacheck/configure @@ -0,0 +1,5251 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.69 for LaCheck (TeX Live) 1.28. +# +# Report bugs to . +# +# +# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. +# +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +# Use a proper internal environment variable to ensure we don't fall + # into an infinite loop, continuously re-executing ourselves. + if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then + _as_can_reexec=no; export _as_can_reexec; + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +as_fn_exit 255 + fi + # We don't want this to propagate to other subprocesses. + { _as_can_reexec=; unset _as_can_reexec;} +if test "x$CONFIG_SHELL" = x; then + as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which + # is contrary to our usage. Disable this feature. + alias -g '\${1+\"\$@\"}'='\"\$@\"' + setopt NO_GLOB_SUBST +else + case \`(set -o) 2>/dev/null\` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi +" + as_required="as_fn_return () { (exit \$1); } +as_fn_success () { as_fn_return 0; } +as_fn_failure () { as_fn_return 1; } +as_fn_ret_success () { return 0; } +as_fn_ret_failure () { return 1; } + +exitcode=0 +as_fn_success || { exitcode=1; echo as_fn_success failed.; } +as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } +as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } +as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } +if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : + +else + exitcode=1; echo positional parameters were not saved. +fi +test x\$exitcode = x0 || exit 1 +test -x / || exit 1" + as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO + as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO + eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && + test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1" + if (eval "$as_required") 2>/dev/null; then : + as_have_required=yes +else + as_have_required=no +fi + if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : + +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +as_found=false +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + as_found=: + case $as_dir in #( + /*) + for as_base in sh bash ksh sh5; do + # Try only shells that exist, to save several forks. + as_shell=$as_dir/$as_base + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : + CONFIG_SHELL=$as_shell as_have_required=yes + if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : + break 2 +fi +fi + done;; + esac + as_found=false +done +$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && + { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : + CONFIG_SHELL=$SHELL as_have_required=yes +fi; } +IFS=$as_save_IFS + + + if test "x$CONFIG_SHELL" != x; then : + export CONFIG_SHELL + # We cannot yet assume a decent shell, so we have to provide a +# neutralization value for shells without unset; and this also +# works around shells that cannot unset nonexistent variables. +# Preserve -v and -x to the replacement shell. +BASH_ENV=/dev/null +ENV=/dev/null +(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV +case $- in # (((( + *v*x* | *x*v* ) as_opts=-vx ;; + *v* ) as_opts=-v ;; + *x* ) as_opts=-x ;; + * ) as_opts= ;; +esac +exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"} +# Admittedly, this is quite paranoid, since all the known shells bail +# out after a failed `exec'. +$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2 +exit 255 +fi + + if test x$as_have_required = xno; then : + $as_echo "$0: This script requires a shell more modern than all" + $as_echo "$0: the shells that I found on your system." + if test x${ZSH_VERSION+set} = xset ; then + $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" + $as_echo "$0: be upgraded to zsh 4.3.4 or later." + else + $as_echo "$0: Please tell bug-autoconf@gnu.org and tex-k@tug.org +$0: about your system, including any error possibly output +$0: before this message. Then install a modern shell, or +$0: manually run the script under such a shell if you do +$0: have one." + fi + exit 1 +fi +fi +fi +SHELL=${CONFIG_SHELL-/bin/sh} +export SHELL +# Unset more variables known to interfere with behavior of common tools. +CLICOLOR_FORCE= GREP_OPTIONS= +unset CLICOLOR_FORCE GREP_OPTIONS + +## --------------------- ## +## M4sh Shell Functions. ## +## --------------------- ## +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + + + as_lineno_1=$LINENO as_lineno_1a=$LINENO + as_lineno_2=$LINENO as_lineno_2a=$LINENO + eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && + test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { + # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } + + # If we had to re-execute with $CONFIG_SHELL, we're ensured to have + # already done that, so ensure we don't try to do so again and fall + # in an infinite loop. This has already happened in practice. + _as_can_reexec=no; export _as_can_reexec + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +test -n "$DJDIR" || exec 7<&0 &1 + +# Name of the host. +# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= + +# Identity of this package. +PACKAGE_NAME='LaCheck (TeX Live)' +PACKAGE_TARNAME='lacheck--tex-live-' +PACKAGE_VERSION='1.28' +PACKAGE_STRING='LaCheck (TeX Live) 1.28' +PACKAGE_BUGREPORT='tex-k@tug.org' +PACKAGE_URL='' + +ac_unique_file="lacheck.l" +ac_subst_vars='am__EXEEXT_FALSE +am__EXEEXT_TRUE +LTLIBOBJS +LIBOBJS +REV +LEXLIB +LEX_OUTPUT_ROOT +LEX +WARNING_CFLAGS +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +am__nodep +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +AM_BACKSLASH +AM_DEFAULT_VERBOSITY +AM_DEFAULT_V +AM_V +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_URL +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_silent_rules +enable_maintainer_mode +enable_dependency_tracking +enable_compiler_warnings +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *=) ac_optarg= ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid feature name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + as_fn_error $? "invalid package name: $ac_useropt" + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) as_fn_error $? "unrecognized option: \`$ac_option' +Try \`$0 --help' for more information" + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + case $ac_envvar in #( + '' | [0-9]* | *[!_$as_cr_alnum]* ) + as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; + esac + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + as_fn_error $? "missing argument to $ac_option" +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + as_fn_error $? "working directory cannot be determined" +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + as_fn_error $? "pwd does not report name of working directory" + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures LaCheck (TeX Live) 1.28 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking ...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root + [DATAROOTDIR/doc/lacheck--tex-live-] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of LaCheck (TeX Live) 1.28:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-silent-rules less verbose build output (undo: "make V=1") + --disable-silent-rules verbose build output (undo: "make V=0") + --enable-maintainer-mode + enable make rules and dependencies not useful (and + sometimes confusing) to the casual installer + --enable-dependency-tracking + do not reject slow dependency extractors + --disable-dependency-tracking + speeds up one-time build + --enable-compiler-warnings=[no|min|yes|max|all] + Turn on compiler warnings [default: yes if + maintainer-mode, min otherwise] + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory + LIBS libraries to pass to the linker, e.g. -l + CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if + you have headers in a nonstandard directory + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to . +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +LaCheck (TeX Live) configure 1.28 +generated by GNU Autoconf 2.69 + +Copyright (C) 2012 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi + +## ------------------------ ## +## Autoconf initialization. ## +## ------------------------ ## + +# ac_fn_c_try_compile LINENO +# -------------------------- +# Try to compile conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_compile () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext + if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_compile + +# ac_fn_c_try_link LINENO +# ----------------------- +# Try to link conftest.$ac_ext, and return whether this succeeded. +ac_fn_c_try_link () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + rm -f conftest.$ac_objext conftest$ac_exeext + if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + grep -v '^ *+' conftest.err >conftest.er1 + cat conftest.er1 >&5 + mv -f conftest.er1 conftest.err + fi + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + test -x conftest$ac_exeext + }; then : + ac_retval=0 +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_retval=1 +fi + # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information + # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would + # interfere with the next link command; also delete a directory that is + # left behind by Apple's compiler. We do this before executing the actions. + rm -rf conftest.dSYM conftest_ipa8_conftest.oo + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + as_fn_set_status $ac_retval + +} # ac_fn_c_try_link +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by LaCheck (TeX Live) $as_me 1.28, which was +generated by GNU Autoconf 2.69. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" + done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; + 2) + as_fn_append ac_configure_args1 " '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + as_fn_append ac_configure_args " '$ac_arg'" + ;; + esac + done +done +{ ac_configure_args0=; unset ac_configure_args0;} +{ ac_configure_args1=; unset ac_configure_args1;} + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + $as_echo "## ---------------- ## +## Cache variables. ## +## ---------------- ##" + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + $as_echo "## ----------------- ## +## Output variables. ## +## ----------------- ##" + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + $as_echo "## ------------------- ## +## File substitutions. ## +## ------------------- ##" + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + $as_echo "## ----------- ## +## confdefs.h. ## +## ----------- ##" + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +$as_echo "/* confdefs.h */" > confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_URL "$PACKAGE_URL" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + # We do not want a PATH search for config.site. + case $CONFIG_SITE in #(( + -*) ac_site_file1=./$CONFIG_SITE;; + */*) ac_site_file1=$CONFIG_SITE;; + *) ac_site_file1=./$CONFIG_SITE;; + esac +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" \ + || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "failed to load site script $ac_site_file +See \`config.log' for more details" "$LINENO" 5; } + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special files + # actually), so we avoid doing that. DJGPP emulates it as a regular file. + if test /dev/null != "$cache_file" && test -f "$cache_file"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) as_fn_append ac_configure_args " '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 +fi +## -------------------- ## +## Main body of script. ## +## -------------------- ## + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +ac_aux_dir= +for ac_dir in ../../build-aux "$srcdir"/../../build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../build-aux \"$srcdir\"/../../build-aux" "$LINENO" 5 +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + + +am__api_version='1.14' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if ${ac_cv_path_install+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in #(( + ./ | .// | /[cC]/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + + done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Reject unsafe characters in $srcdir or the absolute working directory +# name. Accept space and tab only in the latter. +am_lf=' +' +case `pwd` in + *[\\\"\#\$\&\'\`$am_lf]*) + as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; +esac +case $srcdir in + *[\\\"\#\$\&\'\`$am_lf\ \ ]*) + as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;; +esac + +# Do 'set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + am_has_slept=no + for am_try in 1 2; do + echo "timestamp, slept: $am_has_slept" > conftest.file + set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t "$srcdir/configure" conftest.file` + fi + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + as_fn_error $? "ls -t appears to fail. Make sure there is not a broken + alias in your environment" "$LINENO" 5 + fi + if test "$2" = conftest.file || test $am_try -eq 2; then + break + fi + # Just in case. + sleep 1 + am_has_slept=yes + done + test "$2" = conftest.file + ) +then + # Ok. + : +else + as_fn_error $? "newly created file is older than distributed files! +Check your system clock" "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +# If we didn't sleep, we still need to ensure time stamps of config.status and +# generated files are strictly newer. +am_sleep_pid= +if grep 'slept: no' conftest.file >/dev/null 2>&1; then + ( sleep 1 ) & + am_sleep_pid=$! +fi + +rm -f conftest.file + +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +if test x"${MISSING+set}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; + *) + MISSING="\${SHELL} $am_aux_dir/missing" ;; + esac +fi +# Use eval to expand $SHELL +if eval "$MISSING --is-lightweight"; then + am_missing_run="$MISSING " +else + am_missing_run= + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;} +fi + +if test x"${install_sh}" != xset; then + case $am_aux_dir in + *\ * | *\ *) + install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; + *) + install_sh="\${SHELL} $am_aux_dir/install-sh" + esac +fi + +# Installed binaries are usually stripped using 'strip' when the user +# run "make install-strip". However 'strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the 'STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_STRIP+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if ${ac_cv_path_mkdir+:} false; then : + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done + done +IFS=$as_save_IFS + +fi + + test -d ./--version && rmdir ./--version + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_AWK+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +# Check whether --enable-silent-rules was given. +if test "${enable_silent_rules+set}" = set; then : + enableval=$enable_silent_rules; +fi + +case $enable_silent_rules in # ((( + yes) AM_DEFAULT_VERBOSITY=0;; + no) AM_DEFAULT_VERBOSITY=1;; + *) AM_DEFAULT_VERBOSITY=1;; +esac +am_make=${MAKE-make} +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5 +$as_echo_n "checking whether $am_make supports nested variables... " >&6; } +if ${am_cv_make_support_nested_variables+:} false; then : + $as_echo_n "(cached) " >&6 +else + if $as_echo 'TRUE=$(BAR$(V)) +BAR0=false +BAR1=true +V=1 +am__doit: + @$(TRUE) +.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then + am_cv_make_support_nested_variables=yes +else + am_cv_make_support_nested_variables=no +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5 +$as_echo "$am_cv_make_support_nested_variables" >&6; } +if test $am_cv_make_support_nested_variables = yes; then + AM_V='$(V)' + AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)' +else + AM_V=$AM_DEFAULT_VERBOSITY + AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY +fi +AM_BACKSLASH='\' + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo this is the am__doit target +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# Ignore all kinds of additional output from 'make'. +case `$am_make -s -f confmf 2> /dev/null` in #( +*the\ am__doit\ target*) + am__include=include + am__quote= + _am_result=GNU + ;; +esac +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + case `$am_make -s -f confmf 2> /dev/null` in #( + *the\ am__doit\ target*) + am__include=.include + am__quote="\"" + _am_result=BSD + ;; + esac +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then : + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' + am__nodep='_no' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ac_ct_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "no acceptable C compiler found in \$PATH +See \`config.log' for more details" "$LINENO" 5; } + +# Provide some information about the compiler. +$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +for ac_option in --version -v -V -qversion; do + { { ac_try="$ac_compiler $ac_option >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compiler $ac_option >&5") 2>conftest.err + ac_status=$? + if test -s conftest.err; then + sed '10a\ +... rest of stderr output deleted ... + 10q' conftest.err >conftest.er1 + cat conftest.er1 >&5 + fi + rm -f conftest.er1 conftest.err + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +done + +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { { ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi +if test -z "$ac_file"; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error 77 "C compiler cannot create executables +See \`config.log' for more details" "$LINENO" 5; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +ac_exeext=$ac_cv_exeext + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest conftest$ac_cv_exeext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +FILE *f = fopen ("conftest.out", "w"); + return ferror (f) || fclose (f) != 0; + + ; + return 0; +} +_ACEOF +ac_clean_files="$ac_clean_files conftest.out" +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +if test "$cross_compiling" != yes; then + { { ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } + if { ac_try='./conftest$ac_cv_exeext' + { { case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details" "$LINENO" 5; } + fi + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out +ac_clean_files=$ac_clean_files_save +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if ${ac_cv_objext+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { { ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; }; then : + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "cannot compute suffix of object files: cannot compile +See \`config.log' for more details" "$LINENO" 5; } +fi +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if ${ac_cv_c_compiler_gnu+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_compiler_gnu=yes +else + ac_compiler_gnu=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if ${ac_cv_prog_cc_g+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +else + CFLAGS="" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + +else + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_g=yes +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if ${ac_cv_prog_cc_c89+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +#include +struct stat; +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + if ac_fn_c_try_compile "$LINENO"; then : + ac_cv_prog_cc_c89=$ac_arg +fi +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac +if test "x$ac_cv_prog_cc_c89" != xno; then : + +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5 +$as_echo_n "checking whether $CC understands -c and -o together... " >&6; } +if ${am_cv_prog_cc_c_o+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF + # Make sure it works both with $CC and with simple cc. + # Following AC_PROG_CC_C_O, we do the test twice because some + # compilers refuse to overwrite an existing .o file with -o, + # though they will create one. + am_cv_prog_cc_c_o=yes + for am_i in 1 2; do + if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5 + ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } \ + && test -f conftest2.$ac_objext; then + : OK + else + am_cv_prog_cc_c_o=no + break + fi + done + rm -f core conftest* + unset am_i +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5 +$as_echo "$am_cv_prog_cc_c_o" >&6; } +if test "$am_cv_prog_cc_c_o" != yes; then + # Losing compiler, so override with the script. + # FIXME: It is wrong to rewrite CC. + # But if we don't then we get into trouble of one sort or another. + # A longer-term fix would be to have automake use am__CC in this case, + # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" + CC="$am_aux_dir/compile $CC" +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if ${am_cv_CC_dependencies_compiler_type+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named 'D' -- because '-MD' means "put the output + # in D". + rm -rf conftest.dir + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + am__universal=false + case " $depcc " in #( + *\ -arch\ *\ -arch\ *) am__universal=true ;; + esac + + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with + # Solaris 10 /bin/sh. + echo '/* dummy */' > sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + # We check with '-c' and '-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle '-M -o', and we need to detect this. Also, some Intel + # versions had trouble with output in subdirs. + am__obj=sub/conftest.${OBJEXT-o} + am__minus_obj="-o $am__obj" + case $depmode in + gcc) + # This depmode causes a compiler race in universal mode. + test "$am__universal" = false || continue + ;; + nosideeffect) + # After this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested. + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + msvc7 | msvc7msys | msvisualcpp | msvcmsys) + # This compiler won't grok '-c -o', but also, the minuso test has + # not run yet. These depmodes are late enough in the game, and + # so weak that their functioning should not be impacted. + am__obj=conftest.${OBJEXT-o} + am__minus_obj= + ;; + none) break ;; + esac + if depmode=$depmode \ + source=sub/conftest.c object=$am__obj \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep $am__obj sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + +# Check whether --enable-compiler-warnings was given. +if test "${enable_compiler_warnings+set}" = set; then : + enableval=$enable_compiler_warnings; +fi +case $enable_compiler_warnings in #( + no | min | yes | max | all) : + ;; #( + *) : + if test "x$enable_maintainer_mode" = xyes; then : + enable_compiler_warnings=yes +else + enable_compiler_warnings=min +fi ;; +esac + + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='lacheck--tex-live-' + VERSION='1.28' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +# For better backward compatibility. To be removed once Automake 1.9.x +# dies out for good. For more background, see: +# +# +mkdir_p='$(MKDIR_P)' + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. Yes, it's still used +# in the wild :-( We should find a proper way to deprecate it ... +AMTAR='$${TAR-tar}' + + +# We'll loop over all known methods to create a tar archive until one works. +_am_tools='gnutar pax cpio none' + +am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -' + + + + + + +# POSIX will say in a future version that running "rm -f" with no argument +# is OK; and we want to be able to make that assumption in our Makefile +# recipes. So use an aggressive probe to check that the usage we want is +# actually supported "in the wild" to an acceptable degree. +# See automake bug#10828. +# To make any issue more visible, cause the running configure to be aborted +# by default if the 'rm' program in use doesn't match our expectations; the +# user can still override this though. +if rm -f && rm -fr && rm -rf; then : OK; else + cat >&2 <<'END' +Oops! + +Your 'rm' program seems unable to run without file operands specified +on the command line, even when the '-f' option is present. This is contrary +to the behaviour of most rm programs out there, and not conforming with +the upcoming POSIX standard: + +Please tell bug-automake@gnu.org about your system, including the value +of your $PATH and any error possibly output before this message. This +can help us improve future automake versions. + +END + if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then + echo 'Configuration will proceed anyway, since you have set the' >&2 + echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2 + echo >&2 + else + cat >&2 <<'END' +Aborting the configuration process, to ensure you take notice of the issue. + +You can download and install GNU coreutils to get an 'rm' implementation +that behaves properly: . + +If you want to complete the configuration process using your problematic +'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM +to "yes", and re-run configure. + +END + as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5 + fi +fi + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then : + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler accepts prototypes" >&5 +$as_echo_n "checking whether the compiler accepts prototypes... " >&6; } +if ${kb_cv_c_prototypes+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +extern void foo(int i,...); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + kb_cv_c_prototypes=yes +else + kb_cv_c_prototypes=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $kb_cv_c_prototypes" >&5 +$as_echo "$kb_cv_c_prototypes" >&6; } +if test "x$kb_cv_c_prototypes" = xno; then + as_fn_error $? "Sorry, your compiler does not understand prototypes." "$LINENO" 5 +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking what warning flags to pass to the C compiler" >&5 +$as_echo_n "checking what warning flags to pass to the C compiler... " >&6; } +if ${kpse_cv_warning_cflags+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test "x$GCC" = xyes; then + kpse_cv_warning_cflags= +if test "x$enable_compiler_warnings" != xno; then + kpse_cv_warning_cflags="-Wimplicit -Wreturn-type" + case `$CC -dumpversion` in #( + 3.4.* | 4.*) : + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wdeclaration-after-statement" ;; #( + *) : + ;; +esac + case `$CC -dumpversion` in #( + 3.[234].* | 4.*) : + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wno-unknown-pragmas" ;; #( + *) : + ;; +esac + if test "x$enable_compiler_warnings" != xmin; then + kpse_cv_warning_cflags="-Wall -Wunused $kpse_cv_warning_cflags" + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wmissing-prototypes -Wmissing-declarations" + if test "x$enable_compiler_warnings" != xyes; then + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wparentheses -Wswitch -Wtrigraphs -Wpointer-arith" + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wcast-qual -Wcast-align -Wwrite-strings" + case `$CC -dumpversion` in #( + 3.4.* | 4.*) : + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wold-style-definition" ;; #( + *) : + ;; +esac + if test "x$enable_compiler_warnings" != xmax; then + kpse_cv_warning_cflags="$kpse_cv_warning_cflags -Wshadow" + fi + fi + fi +fi +elif test "x$enable_compiler_warnings" = xno; then + kpse_cv_warning_cflags= +else + kpse_cv_warning_cflags= # FIXME: warning flags for non-GNU C compilers +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $kpse_cv_warning_cflags" >&5 +$as_echo "$kpse_cv_warning_cflags" >&6; } +WARNING_CFLAGS=$kpse_cv_warning_cflags + + + + + + + + +for ac_prog in flex lex +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_LEX+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_LEX="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +LEX=$ac_cv_prog_LEX +if test -n "$LEX"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5 +$as_echo "$LEX" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$LEX" && break +done +test -n "$LEX" || LEX=":" + +if test "x$LEX" != "x:"; then + cat >conftest.l <<_ACEOF +%% +a { ECHO; } +b { REJECT; } +c { yymore (); } +d { yyless (1); } +e { /* IRIX 6.5 flex 2.5.4 underquotes its yyless argument. */ + yyless ((input () != 0)); } +f { unput (yytext[0]); } +. { BEGIN INITIAL; } +%% +#ifdef YYTEXT_POINTER +extern char *yytext; +#endif +int +main (void) +{ + return ! yylex () + ! yywrap (); +} +_ACEOF +{ { ac_try="$LEX conftest.l" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" +$as_echo "$ac_try_echo"; } >&5 + (eval "$LEX conftest.l") 2>&5 + ac_status=$? + $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 + test $ac_status = 0; } +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5 +$as_echo_n "checking lex output file root... " >&6; } +if ${ac_cv_prog_lex_root+:} false; then : + $as_echo_n "(cached) " >&6 +else + +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy +else + as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5 +fi +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5 +$as_echo "$ac_cv_prog_lex_root" >&6; } +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + +if test -z "${LEXLIB+set}"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5 +$as_echo_n "checking lex library... " >&6; } +if ${ac_cv_lib_lex+:} false; then : + $as_echo_n "(cached) " >&6 +else + + ac_save_LIBS=$LIBS + ac_cv_lib_lex='none needed' + for ac_lib in '' -lfl -ll; do + LIBS="$ac_lib $ac_save_LIBS" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_lex=$ac_lib +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + test "$ac_cv_lib_lex" != 'none needed' && break + done + LIBS=$ac_save_LIBS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5 +$as_echo "$ac_cv_lib_lex" >&6; } + test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex +fi + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5 +$as_echo_n "checking whether yytext is a pointer... " >&6; } +if ${ac_cv_prog_lex_yytext_pointer+:} false; then : + $as_echo_n "(cached) " >&6 +else + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +ac_save_LIBS=$LIBS +LIBS="$LEXLIB $ac_save_LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + #define YYTEXT_POINTER 1 +`cat $LEX_OUTPUT_ROOT.c` +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_prog_lex_yytext_pointer=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_save_LIBS + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5 +$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; } +if test $ac_cv_prog_lex_yytext_pointer = yes; then + +$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h + +fi +rm -f conftest.l $LEX_OUTPUT_ROOT.c + +fi + +ac_config_headers="$ac_config_headers config.h" + +REV=1.28 + + +ac_config_files="$ac_config_files Makefile lacheck.1:lacheck.man" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) { eval $ac_var=; unset $ac_var;} ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes: double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \. + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + if test "x$cache_file" != "x/dev/null"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + if test ! -f "$cache_file" || test -h "$cache_file"; then + cat confcache >"$cache_file" + else + case $cache_file in #( + */* | ?:*) + mv -f confcache "$cache_file"$$ && + mv -f "$cache_file"$$ "$cache_file" ;; #( + *) + mv -f confcache "$cache_file" ;; + esac + fi + fi + else + { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +U= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" + as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5 +$as_echo_n "checking that generated files are newer than configure... " >&6; } + if test -n "$am_sleep_pid"; then + # Hide warnings about reused PIDs. + wait $am_sleep_pid 2>/dev/null + fi + { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5 +$as_echo "done" >&6; } + if test -n "$EXEEXT"; then + am__EXEEXT_TRUE= + am__EXEEXT_FALSE='#' +else + am__EXEEXT_TRUE='#' + am__EXEEXT_FALSE= +fi + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + as_fn_error $? "conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + as_fn_error $? "conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." "$LINENO" 5 +fi + +: "${CONFIG_STATUS=./config.status}" +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +as_write_fail=0 +cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false + +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 +## -------------------- ## +## M4sh Initialization. ## +## -------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in #( + *posix*) : + set -o posix ;; #( + *) : + ;; +esac +fi + + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +# Prefer a ksh shell builtin over an external printf program on Solaris, +# but without wasting forks for bash or zsh. +if test -z "$BASH_VERSION$ZSH_VERSION" \ + && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='print -r --' + as_echo_n='print -rn --' +elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in #( + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +as_myself= +case $0 in #(( + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break + done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + exit 1 +fi + +# Unset variables that we do not need and which cause bugs (e.g. in +# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" +# suppresses any "Segmentation fault" message there. '((' could +# trigger a bug in pdksh 5.2.14. +for as_var in BASH_ENV ENV MAIL MAILPATH +do eval test x\${$as_var+set} = xset \ + && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# CDPATH. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + +# as_fn_error STATUS ERROR [LINENO LOG_FD] +# ---------------------------------------- +# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are +# provided, also output the error to LOG_FD, referencing LINENO. Then exit the +# script with STATUS, using 1 if that was 0. +as_fn_error () +{ + as_status=$1; test $as_status -eq 0 && as_status=1 + if test "$4"; then + as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 + fi + $as_echo "$as_me: error: $2" >&2 + as_fn_exit $as_status +} # as_fn_error + + +# as_fn_set_status STATUS +# ----------------------- +# Set $? to STATUS, without forking. +as_fn_set_status () +{ + return $1 +} # as_fn_set_status + +# as_fn_exit STATUS +# ----------------- +# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. +as_fn_exit () +{ + set +e + as_fn_set_status $1 + exit $1 +} # as_fn_exit + +# as_fn_unset VAR +# --------------- +# Portably unset VAR. +as_fn_unset () +{ + { eval $1=; unset $1;} +} +as_unset=as_fn_unset +# as_fn_append VAR VALUE +# ---------------------- +# Append the text in VALUE to the end of the definition contained in VAR. Take +# advantage of any shell optimizations that allow amortized linear growth over +# repeated appends, instead of the typical quadratic growth present in naive +# implementations. +if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : + eval 'as_fn_append () + { + eval $1+=\$2 + }' +else + as_fn_append () + { + eval $1=\$$1\$2 + } +fi # as_fn_append + +# as_fn_arith ARG... +# ------------------ +# Perform arithmetic evaluation on the ARGs, and store the result in the +# global $as_val. Take advantage of shells that can avoid forks. The arguments +# must be portable across $(()) and expr. +if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : + eval 'as_fn_arith () + { + as_val=$(( $* )) + }' +else + as_fn_arith () + { + as_val=`expr "$@" || test $? -eq 1` + } +fi # as_fn_arith + + +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in #((((( +-n*) + case `echo 'xy\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + xy) ECHO_C='\c';; + *) echo `echo ksh88 bug on AIX 6.1` > /dev/null + ECHO_T=' ';; + esac;; +*) + ECHO_N='-n';; +esac + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -pR'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -pR' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -pR' + fi +else + as_ln_s='cp -pR' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + + +# as_fn_mkdir_p +# ------------- +# Create "$as_dir" as a directory, including parents if necessary. +as_fn_mkdir_p () +{ + + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || eval $as_mkdir_p || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" + + +} # as_fn_mkdir_p +if mkdir -p . 2>/dev/null; then + as_mkdir_p='mkdir -p "$as_dir"' +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + + +# as_fn_executable_p FILE +# ----------------------- +# Test if FILE is an executable regular file. +as_fn_executable_p () +{ + test -f "$1" && test -x "$1" +} # as_fn_executable_p +as_test_x='test -x' +as_executable_p=as_fn_executable_p + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 +## ----------------------------------- ## +## Main body of $CONFIG_STATUS script. ## +## ----------------------------------- ## +_ASEOF +test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# Save the log message, to keep $0 and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by LaCheck (TeX Live) $as_me 1.28, which was +generated by GNU Autoconf 2.69. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files and other configuration actions +from templates according to the current configuration. Unless the files +and actions are specified as TAGs, all are instantiated by default. + +Usage: $0 [OPTION]... [TAG]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + --config print configuration, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to ." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" +ac_cs_version="\\ +LaCheck (TeX Live) config.status 1.28 +configured by $0, generated by GNU Autoconf 2.69, + with options \\"\$ac_cs_config\\" + +Copyright (C) 2012 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=?*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + --*=) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg= + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --config | --confi | --conf | --con | --co | --c ) + $as_echo "$ac_cs_config"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + '') as_fn_error $? "missing file argument" ;; + esac + as_fn_append CONFIG_FILES " '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + as_fn_append CONFIG_HEADERS " '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + as_fn_error $? "ambiguous option: \`$1' +Try \`$0 --help' for more information.";; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) as_fn_error $? "unrecognized option: \`$1' +Try \`$0 --help' for more information." ;; + + *) as_fn_append ac_config_targets " $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "lacheck.1") CONFIG_FILES="$CONFIG_FILES lacheck.1:lacheck.man" ;; + + *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= ac_tmp= + trap 'exit_status=$? + : "${ac_tmp:=$tmp}" + { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status +' 0 + trap 'as_fn_exit 1' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 +ac_tmp=$tmp + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr=`echo X | tr X '\015'` +# On cygwin, bash can eat \r inside `` if the user requested igncr. +# But we know of no other shell where ac_cr would be empty at this +# point, so we can use a bashism as a fallback. +if test "x$ac_cr" = x; then + eval ac_cr=\$\'\\r\' +fi +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$ac_tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 +ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\)..*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\)..*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' >$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ + || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 +_ACEOF + +# VPATH may cause trouble with some makes, so we remove sole $(srcdir), +# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ +h +s/// +s/^/:/ +s/[ ]*$/:/ +s/:\$(srcdir):/:/g +s/:\${srcdir}:/:/g +s/:@srcdir@:/:/g +s/^:*// +s/:*$// +x +s/\(=[ ]*\).*/\1/ +G +s/\n// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$ac_tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_tt=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_tt"; then + break + elif $ac_last_try; then + as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' >$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$ac_tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + as_fn_append ac_file_inputs " '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$ac_tmp/stdin" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir="$ac_dir"; as_fn_mkdir_p + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ + >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ + "$ac_tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined" >&2;} + + rm -f "$ac_tmp/stdin" + case $ac_file in + -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; + *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; + esac \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" + } >"$ac_tmp/config.h" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$ac_tmp/config.h" "$ac_file" \ + || as_fn_error $? "could not create $ac_file" "$LINENO" 5 + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ + || as_fn_error $? "could not create -" "$LINENO" 5 + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || { + # Older Autoconf quotes --file arguments for eval, but not when files + # are listed without --file. Let's play safe and only enable the eval + # if we detect the quoting. + case $CONFIG_FILES in + *\'*) eval set x "$CONFIG_FILES" ;; + *) set x $CONFIG_FILES ;; + esac + shift + for mf + do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named 'Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running 'make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "$am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + as_dir=$dirpart/$fdir; as_fn_mkdir_p + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done + done +} + ;; + + esac +done # for ac_tag + + +as_fn_exit 0 +_ACEOF +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || as_fn_exit 1 +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/Build/source/utils/lacheck/configure.ac b/Build/source/utils/lacheck/configure.ac new file mode 100644 index 00000000000..61ec024bfc2 --- /dev/null +++ b/Build/source/utils/lacheck/configure.ac @@ -0,0 +1,26 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Copyright (C) 2009-2014 Peter Breitenlohner +dnl +dnl This file is free software; the copyright holder +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +m4_define([lacheck_version], [1.28]) +AC_INIT([LaCheck (TeX Live)], lacheck_version, [tex-k@tug.org]) +AC_PREREQ([2.65]) +AC_CONFIG_SRCDIR([lacheck.l]) +AC_CONFIG_AUX_DIR([../../build-aux]) +AC_CONFIG_MACRO_DIR([../../m4]) + +KPSE_BASIC([lacheck]) + +AC_PROG_LEX + +AC_CONFIG_HEADERS([config.h])[]dnl unused, to avoid zillions of -D's on command line + +AC_SUBST([REV], [lacheck_version]) + +AC_CONFIG_FILES([Makefile lacheck.1:lacheck.man]) + +AC_OUTPUT diff --git a/Build/source/utils/lacheck/lacheck.c b/Build/source/utils/lacheck/lacheck.c new file mode 100644 index 00000000000..454341bf8d4 --- /dev/null +++ b/Build/source/utils/lacheck/lacheck.c @@ -0,0 +1,4699 @@ + +#line 3 "lacheck.c" + +#define YY_INT_ALIGNED short int + +/* A lexical scanner generated by flex */ + +#define FLEX_SCANNER +#define YY_FLEX_MAJOR_VERSION 2 +#define YY_FLEX_MINOR_VERSION 5 +#define YY_FLEX_SUBMINOR_VERSION 39 +#if YY_FLEX_SUBMINOR_VERSION > 0 +#define FLEX_BETA +#endif + +/* First, we deal with platform-specific or compiler-specific issues. */ + +/* begin standard C headers. */ +#include +#include +#include +#include + +/* end standard C headers. */ + +/* flex integer type definitions */ + +#ifndef FLEXINT_H +#define FLEXINT_H + +/* C99 systems have . Non-C99 systems may or may not. */ + +#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L + +/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h, + * if you want the limit (max/min) macros for int types. + */ +#ifndef __STDC_LIMIT_MACROS +#define __STDC_LIMIT_MACROS 1 +#endif + +#include +typedef int8_t flex_int8_t; +typedef uint8_t flex_uint8_t; +typedef int16_t flex_int16_t; +typedef uint16_t flex_uint16_t; +typedef int32_t flex_int32_t; +typedef uint32_t flex_uint32_t; +#else +typedef signed char flex_int8_t; +typedef short int flex_int16_t; +typedef int flex_int32_t; +typedef unsigned char flex_uint8_t; +typedef unsigned short int flex_uint16_t; +typedef unsigned int flex_uint32_t; + +/* Limits of integral types. */ +#ifndef INT8_MIN +#define INT8_MIN (-128) +#endif +#ifndef INT16_MIN +#define INT16_MIN (-32767-1) +#endif +#ifndef INT32_MIN +#define INT32_MIN (-2147483647-1) +#endif +#ifndef INT8_MAX +#define INT8_MAX (127) +#endif +#ifndef INT16_MAX +#define INT16_MAX (32767) +#endif +#ifndef INT32_MAX +#define INT32_MAX (2147483647) +#endif +#ifndef UINT8_MAX +#define UINT8_MAX (255U) +#endif +#ifndef UINT16_MAX +#define UINT16_MAX (65535U) +#endif +#ifndef UINT32_MAX +#define UINT32_MAX (4294967295U) +#endif + +#endif /* ! C99 */ + +#endif /* ! FLEXINT_H */ + +#ifdef __cplusplus + +/* The "const" storage-class-modifier is valid. */ +#define YY_USE_CONST + +#else /* ! __cplusplus */ + +/* C99 requires __STDC__ to be defined as 1. */ +#if defined (__STDC__) + +#define YY_USE_CONST + +#endif /* defined (__STDC__) */ +#endif /* ! __cplusplus */ + +#ifdef YY_USE_CONST +#define yyconst const +#else +#define yyconst +#endif + +/* Returned upon end-of-file. */ +#define YY_NULL 0 + +/* Promotes a possibly negative, possibly signed char to an unsigned + * integer for use as an array index. If the signed char is negative, + * we want to instead treat it as an 8-bit unsigned char, hence the + * double cast. + */ +#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c) + +/* Enter a start condition. This macro really ought to take a parameter, + * but we do it the disgusting crufty way forced on us by the ()-less + * definition of BEGIN. + */ +#define BEGIN (yy_start) = 1 + 2 * + +/* Translate the current start state into a value that can be later handed + * to BEGIN to return to the state. The YYSTATE alias is for lex + * compatibility. + */ +#define YY_START (((yy_start) - 1) / 2) +#define YYSTATE YY_START + +/* Action number for EOF rule of a given start state. */ +#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1) + +/* Special action meaning "start processing a new file". */ +#define YY_NEW_FILE yyrestart(yyin ) + +#define YY_END_OF_BUFFER_CHAR 0 + +/* Size of default input buffer. */ +#ifndef YY_BUF_SIZE +#define YY_BUF_SIZE 16384 +#endif + +/* The state buf must be large enough to hold one state per character in the main buffer. + */ +#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type)) + +#ifndef YY_TYPEDEF_YY_BUFFER_STATE +#define YY_TYPEDEF_YY_BUFFER_STATE +typedef struct yy_buffer_state *YY_BUFFER_STATE; +#endif + +#ifndef YY_TYPEDEF_YY_SIZE_T +#define YY_TYPEDEF_YY_SIZE_T +typedef size_t yy_size_t; +#endif + +extern yy_size_t yyleng; + +extern FILE *yyin, *yyout; + +#define EOB_ACT_CONTINUE_SCAN 0 +#define EOB_ACT_END_OF_FILE 1 +#define EOB_ACT_LAST_MATCH 2 + + #define YY_LESS_LINENO(n) + #define YY_LINENO_REWIND_TO(ptr) + +/* Return all but the first "n" matched characters back to the input stream. */ +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + *yy_cp = (yy_hold_char); \ + YY_RESTORE_YY_MORE_OFFSET \ + (yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \ + YY_DO_BEFORE_ACTION; /* set up yytext again */ \ + } \ + while ( 0 ) + +#define unput(c) yyunput( c, (yytext_ptr) ) + +#ifndef YY_STRUCT_YY_BUFFER_STATE +#define YY_STRUCT_YY_BUFFER_STATE +struct yy_buffer_state + { + FILE *yy_input_file; + + char *yy_ch_buf; /* input buffer */ + char *yy_buf_pos; /* current position in input buffer */ + + /* Size of input buffer in bytes, not including room for EOB + * characters. + */ + yy_size_t yy_buf_size; + + /* Number of characters read into yy_ch_buf, not including EOB + * characters. + */ + yy_size_t yy_n_chars; + + /* Whether we "own" the buffer - i.e., we know we created it, + * and can realloc() it to grow it, and should free() it to + * delete it. + */ + int yy_is_our_buffer; + + /* Whether this is an "interactive" input source; if so, and + * if we're using stdio for input, then we want to use getc() + * instead of fread(), to make sure we stop fetching input after + * each newline. + */ + int yy_is_interactive; + + /* Whether we're considered to be at the beginning of a line. + * If so, '^' rules will be active on the next match, otherwise + * not. + */ + int yy_at_bol; + + int yy_bs_lineno; /**< The line count. */ + int yy_bs_column; /**< The column count. */ + + /* Whether to try to fill the input buffer when we reach the + * end of it. + */ + int yy_fill_buffer; + + int yy_buffer_status; + +#define YY_BUFFER_NEW 0 +#define YY_BUFFER_NORMAL 1 + /* When an EOF's been seen but there's still some text to process + * then we mark the buffer as YY_EOF_PENDING, to indicate that we + * shouldn't try reading from the input source any more. We might + * still have a bunch of tokens to match, though, because of + * possible backing-up. + * + * When we actually see the EOF, we change the status to "new" + * (via yyrestart()), so that the user can continue scanning by + * just pointing yyin at a new input file. + */ +#define YY_BUFFER_EOF_PENDING 2 + + }; +#endif /* !YY_STRUCT_YY_BUFFER_STATE */ + +/* Stack of input buffers. */ +static size_t yy_buffer_stack_top = 0; /**< index of top of stack. */ +static size_t yy_buffer_stack_max = 0; /**< capacity of stack. */ +static YY_BUFFER_STATE * yy_buffer_stack = 0; /**< Stack as an array. */ + +/* We provide macros for accessing buffer states in case in the + * future we want to put the buffer states in a more general + * "scanner state". + * + * Returns the top of the stack, or NULL. + */ +#define YY_CURRENT_BUFFER ( (yy_buffer_stack) \ + ? (yy_buffer_stack)[(yy_buffer_stack_top)] \ + : NULL) + +/* Same as previous macro, but useful when we know that the buffer stack is not + * NULL or when we need an lvalue. For internal use only. + */ +#define YY_CURRENT_BUFFER_LVALUE (yy_buffer_stack)[(yy_buffer_stack_top)] + +/* yy_hold_char holds the character lost when yytext is formed. */ +static char yy_hold_char; +static yy_size_t yy_n_chars; /* number of characters read into yy_ch_buf */ +yy_size_t yyleng; + +/* Points to current character in buffer. */ +static char *yy_c_buf_p = (char *) 0; +static int yy_init = 0; /* whether we need to initialize */ +static int yy_start = 0; /* start state number */ + +/* Flag which is used to allow yywrap()'s to do buffer switches + * instead of setting up a fresh yyin. A bit of a hack ... + */ +static int yy_did_buffer_switch_on_eof; + +void yyrestart (FILE *input_file ); +void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ); +YY_BUFFER_STATE yy_create_buffer (FILE *file,int size ); +void yy_delete_buffer (YY_BUFFER_STATE b ); +void yy_flush_buffer (YY_BUFFER_STATE b ); +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ); +void yypop_buffer_state (void ); + +static void yyensure_buffer_stack (void ); +static void yy_load_buffer_state (void ); +static void yy_init_buffer (YY_BUFFER_STATE b,FILE *file ); + +#define YY_FLUSH_BUFFER yy_flush_buffer(YY_CURRENT_BUFFER ) + +YY_BUFFER_STATE yy_scan_buffer (char *base,yy_size_t size ); +YY_BUFFER_STATE yy_scan_string (yyconst char *yy_str ); +YY_BUFFER_STATE yy_scan_bytes (yyconst char *bytes,yy_size_t len ); + +void *yyalloc (yy_size_t ); +void *yyrealloc (void *,yy_size_t ); +void yyfree (void * ); + +#define yy_new_buffer yy_create_buffer + +#define yy_set_interactive(is_interactive) \ + { \ + if ( ! YY_CURRENT_BUFFER ){ \ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \ + } + +#define yy_set_bol(at_bol) \ + { \ + if ( ! YY_CURRENT_BUFFER ){\ + yyensure_buffer_stack (); \ + YY_CURRENT_BUFFER_LVALUE = \ + yy_create_buffer(yyin,YY_BUF_SIZE ); \ + } \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \ + } + +#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol) + +/* Begin user sect3 */ + +typedef unsigned char YY_CHAR; + +FILE *yyin = (FILE *) 0, *yyout = (FILE *) 0; + +typedef int yy_state_type; + +extern int yylineno; + +int yylineno = 1; + +extern char *yytext; +#define yytext_ptr yytext + +static yy_state_type yy_get_previous_state (void ); +static yy_state_type yy_try_NUL_trans (yy_state_type current_state ); +static int yy_get_next_buffer (void ); +static void yy_fatal_error (yyconst char msg[] ); + +/* Done after the current pattern has been matched and before the + * corresponding action - sets up yytext. + */ +#define YY_DO_BEFORE_ACTION \ + (yytext_ptr) = yy_bp; \ + yyleng = (size_t) (yy_cp - yy_bp); \ + (yy_hold_char) = *yy_cp; \ + *yy_cp = '\0'; \ + (yy_c_buf_p) = yy_cp; + +#define YY_NUM_RULES 88 +#define YY_END_OF_BUFFER 89 +/* This struct is not used in this scanner, + but its presence is necessary. */ +struct yy_trans_info + { + flex_int32_t yy_verify; + flex_int32_t yy_nxt; + }; +static yyconst flex_int16_t yy_acclist[361] = + { 0, + 89, 87, 88, 87, 88, 4, 88, 87, 88, 43, + 87, 88, 81, 87, 88, 87, 88, 87, 88, 87, + 88, 87, 88, 87, 88, 9, 87, 88, 10, 87, + 88, 87, 88, 87, 88, 87, 88, 87, 88, 87, + 88, 87, 88, 49, 88, 88, 49, 88, 59, 88, + 59, 88, 52, 88, 51, 52, 88, 53, 88, 52, + 88, 85, 88, 85, 88, 88, 83, 88, 82, 88, + 83, 88, 56, 88, 55, 88, 56, 88, 31, 88, + 4, 88, 31, 88, 31, 88, 29, 31, 88, 30, + 31, 88, 41, 88, 40, 41, 88, 41, 88, 35, + + 88, 35, 88, 35, 88, 33, 35, 88, 34, 35, + 88, 27, 88, 25, 27, 88, 4, 25, 88, 13, + 27, 88, 27, 88, 13, 27, 88, 24, 27, 88, + 24, 27, 88, 13, 27, 88, 27, 88, 13, 27, + 88, 9, 27, 88, 11, 27, 88, 26, 27, 88, + 12, 27, 88, 12, 27, 88, 27, 88, 27, 88, + 12, 27, 88, 27, 88, 12, 27, 88, 10, 27, + 88, 80, 63, 42, 44, 3, 79, 7, 2, 36, + 37, 17, 38, 1, 39, 5, 6,16445, 8, 63, + 79,16445, 49, 1, 49, 59, 1, 59, 1, 85, + + 1, 85, 80, 13, 13, 13, 79, 13, 18, 13, + 12, 12, 12, 16, 12, 78,16444, 3, 66, 68, + 16446,16445, 77, 77, 77, 14, 68,16446,16445, 78, + 16444, 13,16446, 12,16446,16460,16460, 15,16444, 3, + 3,16460,16460, 77, 77, 73, 73, 77, 22, 22, + 77, 19, 19, 77, 8253, 25,16444, 23, 67, 67, + 8268, 67, 67, 8252, 67, 3, 67, 8268, 8254, 28, + 28, 77, 28, 58, 57, 8, 63, 67, 67, 67, + 67, 71, 3, 3, 67, 28, 77, 28, 77, 74, + 74, 74, 77, 74, 74, 54, 54, 54, 77, 54, + + 67, 67, 67, 70, 3, 67, 3, 48, 47, 9, + 10, 84, 74, 75, 75, 75, 77, 75, 75, 67, + 29, 30, 33, 34, 9, 11, 10, 3, 64, 75, + 3, 69, 65, 65, 65, 3, 65, 46, 46, 77, + 86, 77, 86, 65, 72, 3, 65, 65, 65, 3, + 45, 45, 77, 3, 20, 20, 77, 21, 50, 32 + } ; + +static yyconst flex_int16_t yy_accept[954] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 2, 4, 6, + 8, 10, 13, 16, 18, 20, 22, 24, 26, 29, + 32, 34, 36, 38, 40, 42, 44, 46, 47, 49, + 51, 53, 55, 58, 60, 62, 64, 66, 67, 69, + 71, 73, 75, 77, 79, 81, 83, 85, 87, 90, + 93, 95, 98, 100, 102, 104, 106, 109, 112, 114, + 117, 120, 123, 125, 128, 131, 134, 137, 139, 142, + 145, 148, 151, 154, 157, 159, 161, 164, 166, 169, + + 172, 172, 172, 172, 172, 173, 173, 173, 173, 173, + 173, 173, 173, 174, 174, 174, 175, 175, 176, 176, + 177, 177, 177, 177, 177, 177, 177, 177, 178, 178, + 179, 180, 181, 182, 183, 183, 183, 184, 185, 186, + 186, 186, 186, 186, 186, 186, 186, 186, 186, 186, + 186, 186, 186, 186, 186, 186, 187, 188, 189, 189, + 190, 191, 191, 191, 191, 191, 191, 191, 191, 191, + 192, 192, 193, 193, 194, 196, 197, 199, 200, 200, + 201, 203, 203, 203, 203, 203, 204, 204, 204, 204, + 204, 205, 206, 208, 209, 210, 210, 210, 210, 210, + + 210, 210, 210, 211, 212, 213, 214, 215, 215, 215, + 216, 216, 216, 216, 216, 216, 216, 216, 216, 216, + 216, 216, 216, 216, 216, 216, 217, 217, 217, 217, + 217, 217, 217, 217, 217, 217, 218, 218, 218, 218, + 219, 219, 219, 219, 219, 219, 219, 219, 219, 219, + 219, 219, 219, 219, 219, 220, 220, 220, 220, 221, + 222, 223, 224, 225, 226, 226, 226, 226, 226, 226, + 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, + 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, + 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, + + 226, 226, 226, 226, 226, 226, 226, 226, 226, 226, + 226, 227, 228, 229, 230, 230, 230, 230, 230, 230, + 230, 230, 230, 230, 230, 231, 231, 231, 231, 232, + 234, 234, 234, 234, 234, 234, 234, 234, 234, 236, + 236, 236, 236, 236, 236, 236, 236, 236, 236, 236, + 236, 237, 238, 238, 238, 238, 238, 239, 239, 239, + 239, 239, 239, 239, 239, 240, 240, 240, 240, 240, + 240, 240, 240, 241, 241, 241, 241, 242, 242, 242, + 242, 242, 243, 244, 244, 244, 244, 244, 244, 244, + 244, 244, 244, 244, 244, 244, 244, 244, 245, 246, + + 246, 246, 246, 246, 246, 246, 246, 246, 246, 246, + 247, 249, 249, 249, 249, 249, 249, 249, 249, 249, + 250, 252, 252, 252, 252, 252, 252, 252, 252, 253, + 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + 255, 255, 255, 255, 255, 256, 256, 256, 256, 256, + 256, 256, 256, 256, 256, 256, 256, 256, 256, 256, + 256, 256, 256, 256, 256, 256, 256, 256, 256, 257, + 258, 258, 258, 258, 258, 259, 259, 259, 259, 259, + 259, 259, 259, 259, 259, 260, 260, 260, 261, 261, + 261, 261, 262, 262, 262, 262, 262, 262, 262, 262, + + 262, 262, 262, 262, 263, 264, 264, 264, 264, 264, + 264, 265, 265, 265, 265, 265, 265, 266, 266, 267, + 267, 268, 268, 268, 268, 269, 269, 269, 269, 269, + 269, 269, 269, 269, 269, 269, 269, 269, 269, 269, + 270, 270, 270, 270, 270, 270, 270, 270, 270, 270, + 270, 270, 270, 271, 273, 274, 274, 274, 274, 274, + 274, 275, 275, 275, 275, 276, 276, 276, 276, 276, + 276, 276, 276, 276, 276, 276, 276, 276, 276, 276, + 276, 276, 276, 276, 277, 278, 278, 278, 278, 278, + 278, 278, 278, 279, 280, 280, 280, 280, 280, 280, + + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 281, 281, 281, 281, 281, 281, 281, 281, 281, 281, + 281, 281, 282, 282, 283, 283, 283, 283, 283, 284, + 285, 285, 285, 286, 286, 286, 286, 286, 286, 286, + 286, 286, 286, 286, 286, 286, 286, 286, 286, 286, + 286, 286, 286, 286, 288, 290, 290, 290, 290, 290, + 290, 290, 290, 290, 290, 290, 290, 291, 292, 292, + 294, 295, 296, 296, 296, 296, 296, 296, 296, 296, + 297, 298, 300, 301, 301, 301, 301, 301, 301, 301, + + 302, 302, 302, 302, 302, 302, 302, 302, 302, 302, + 302, 302, 302, 302, 302, 302, 302, 303, 303, 303, + 303, 303, 303, 303, 304, 304, 304, 305, 306, 306, + 307, 308, 308, 308, 308, 308, 308, 308, 308, 308, + 308, 308, 309, 309, 309, 310, 311, 311, 311, 311, + 311, 311, 311, 311, 312, 312, 312, 312, 312, 313, + 313, 314, 314, 314, 314, 314, 315, 316, 316, 318, + 319, 320, 320, 320, 320, 321, 321, 321, 322, 323, + 324, 325, 326, 327, 327, 328, 328, 328, 328, 328, + 328, 328, 328, 329, 329, 329, 329, 329, 329, 330, + + 330, 330, 330, 330, 330, 330, 330, 330, 330, 330, + 330, 330, 330, 330, 330, 331, 331, 331, 331, 331, + 331, 331, 331, 331, 331, 331, 331, 331, 331, 332, + 332, 332, 332, 332, 332, 332, 332, 332, 332, 332, + 332, 332, 332, 332, 333, 333, 333, 333, 333, 333, + 333, 333, 333, 334, 334, 334, 335, 335, 335, 335, + 335, 336, 336, 337, 337, 338, 338, 338, 338, 338, + 338, 338, 338, 338, 338, 338, 338, 339, 341, 342, + 344, 344, 344, 344, 344, 344, 344, 344, 344, 344, + 344, 345, 345, 345, 346, 347, 347, 347, 348, 348, + + 348, 348, 348, 348, 348, 348, 348, 348, 348, 348, + 348, 348, 348, 348, 348, 349, 349, 349, 349, 349, + 350, 351, 351, 351, 351, 351, 351, 351, 352, 354, + 354, 354, 354, 354, 354, 354, 354, 355, 355, 355, + 355, 356, 358, 358, 359, 359, 360, 360, 360, 360, + 360, 361, 361 + } ; + +static yyconst flex_int32_t yy_ec[256] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 2, 3, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 4, 5, 6, 6, 7, 8, 6, 9, 10, + 11, 12, 13, 14, 15, 16, 17, 18, 18, 18, + 18, 18, 18, 18, 18, 18, 18, 19, 20, 6, + 6, 6, 21, 22, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 24, 25, 26, 6, 1, 27, 28, 29, 30, 31, + + 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, + 42, 43, 37, 44, 45, 46, 47, 48, 49, 50, + 51, 37, 52, 1, 53, 54, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 55, 55, 1, 1, + + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 55, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 56, 56, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 56, 1, 1, + 1, 1, 1, 1, 1 + } ; + +static yyconst flex_int32_t yy_meta[57] = + { 0, + 1, 2, 3, 2, 4, 1, 5, 6, 7, 8, + 8, 1, 1, 9, 1, 10, 1, 8, 8, 8, + 11, 12, 13, 1, 14, 1, 15, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, + 16, 17, 18, 19, 20, 21 + } ; + +static yyconst flex_int16_t yy_base[1045] = + { 0, + 0, 56, 110, 111, 112, 113, 115, 117, 118, 119, + 5108, 5107, 120, 121, 122, 123, 124, 126, 134, 136, + 150, 159, 212, 0, 268, 0, 5131, 155, 323, 179, + 179, 180, 171, 378, 181, 361, 410, 373, 187, 184, + 462, 405, 465, 478, 515, 360, 0, 5134, 5105, 0, + 5104, 5134, 5134, 5134, 167, 0, 5103, 5102, 5134, 5134, + 5101, 5134, 5134, 5100, 5134, 5134, 5121, 470, 5134, 5134, + 5134, 5134, 5098, 5134, 5119, 475, 5134, 5134, 315, 570, + 624, 388, 472, 397, 322, 569, 675, 714, 758, 507, + 324, 585, 463, 583, 589, 593, 809, 373, 860, 385, + + 618, 612, 660, 667, 657, 0, 914, 688, 701, 940, + 968, 5105, 5134, 704, 719, 5134, 571, 5134, 5113, 5134, + 712, 1012, 784, 745, 779, 5086, 817, 5134, 596, 5134, + 5134, 5134, 5134, 5134, 5072, 5069, 5134, 814, 5134, 462, + 474, 853, 545, 860, 384, 688, 109, 491, 369, 645, + 711, 134, 570, 401, 719, 5134, 5134, 801, 891, 5065, + 5062, 987, 865, 901, 1018, 5001, 414, 1035, 796, 1043, + 897, 1067, 838, 0, 0, 0, 0, 5134, 4956, 0, + 0, 4934, 4931, 4900, 4879, 5134, 0, 4883, 619, 729, + 766, 1114, 782, 823, 5134, 4840, 596, 4762, 4774, 4703, + + 462, 4684, 837, 801, 1115, 913, 5134, 597, 4671, 939, + 1059, 1130, 1010, 4649, 4621, 4594, 4587, 4535, 4487, 4485, + 4447, 0, 1139, 4455, 4448, 1169, 1150, 1196, 1209, 1249, + 4414, 4393, 4346, 128, 559, 990, 1304, 4323, 1230, 1311, + 1189, 1314, 536, 170, 468, 509, 382, 694, 390, 565, + 786, 0, 1143, 1335, 5134, 1326, 1241, 4290, 5134, 1003, + 1062, 4298, 4297, 4296, 624, 467, 677, 753, 452, 696, + 714, 803, 1102, 1372, 632, 808, 1128, 313, 813, 1428, + 734, 914, 880, 784, 909, 1194, 1484, 178, 749, 601, + 855, 1145, 926, 976, 989, 996, 1104, 1051, 1238, 1299, + + 980, 1300, 0, 0, 1016, 0, 4299, 1539, 1564, 1532, + 5134, 1571, 1580, 1590, 1596, 1599, 1623, 4298, 4282, 4268, + 4267, 4266, 4265, 4305, 4297, 1070, 1308, 1540, 1673, 1606, + 4261, 4256, 0, 0, 4270, 4254, 4265, 4243, 1678, 4242, + 0, 4220, 1066, 0, 4229, 1685, 1698, 1333, 1702, 4191, + 1269, 1634, 4183, 4167, 4190, 0, 5134, 1727, 1717, 0, + 1736, 1743, 1781, 1345, 1751, 4148, 4139, 4141, 1761, 1806, + 4122, 1796, 1211, 4150, 1192, 1814, 1822, 1776, 1824, 1846, + 906, 1768, 1771, 1204, 1077, 0, 4113, 4147, 1682, 0, + 1850, 4118, 87, 4072, 4045, 1853, 1711, 4044, 4039, 558, + + 1234, 1129, 844, 1288, 1164, 1310, 1313, 1105, 1300, 5134, + 4038, 1547, 1329, 1908, 1523, 1522, 1179, 1242, 1139, 5134, + 4037, 1963, 1536, 1584, 1589, 1597, 867, 1032, 5134, 4035, + 1528, 1601, 1694, 1669, 1608, 1661, 1719, 1195, 1592, 1662, + 1727, 1225, 1367, 1856, 5134, 1864, 1856, 4053, 4050, 4024, + 4048, 1878, 0, 1881, 1966, 2015, 1882, 1979, 2040, 1986, + 2047, 2050, 4034, 1809, 4006, 4005, 4004, 4003, 2094, 1888, + 2058, 2076, 4002, 4001, 5134, 4010, 4001, 4010, 4010, 3996, + 3997, 0, 3986, 3950, 5134, 1879, 3913, 3912, 1973, 3883, + 2004, 5134, 3887, 3882, 2084, 3917, 2104, 1951, 0, 1681, + + 3916, 2119, 3901, 2010, 2022, 3868, 0, 3883, 2126, 2133, + 5134, 2151, 3878, 3907, 1799, 3905, 3904, 2056, 1978, 1748, + 1874, 2136, 2004, 2143, 3903, 963, 1797, 3902, 2161, 0, + 1963, 3901, 3842, 3840, 3842, 3837, 3829, 2164, 2148, 5134, + 2158, 1745, 1810, 1823, 1998, 1695, 2176, 1847, 1875, 2219, + 1769, 1938, 2254, 2284, 0, 2035, 2049, 1979, 2069, 2334, + 5134, 3871, 1797, 2052, 5134, 2096, 2063, 2109, 1824, 2072, + 2386, 2148, 2091, 2054, 2151, 2152, 2092, 2150, 2153, 2160, + 2442, 1957, 2204, 3864, 3863, 3840, 2337, 0, 2172, 3866, + 2344, 3854, 2347, 2353, 2497, 2500, 2507, 2510, 2307, 3819, + + 3819, 3818, 3817, 3812, 2525, 2534, 2541, 3811, 3810, 3813, + 3818, 3813, 2545, 3776, 3790, 3814, 2595, 3802, 3808, 3802, + 3758, 3751, 3769, 2598, 3764, 3748, 3787, 2605, 2614, 3775, + 3783, 3782, 3743, 5134, 3748, 2623, 0, 3776, 2630, 3764, + 2180, 3773, 3770, 2154, 2504, 2181, 2345, 3769, 2639, 3725, + 3721, 3727, 3730, 3716, 2517, 2169, 2654, 2321, 2343, 2182, + 2341, 3729, 2344, 0, 0, 2349, 3724, 2353, 2504, 3750, + 2512, 2517, 2351, 2526, 2647, 2166, 5134, 2699, 0, 3727, + 3726, 2657, 2484, 1852, 2519, 2509, 2524, 2750, 2664, 5134, + 3732, 3721, 3720, 3705, 3732, 2669, 2676, 3717, 3722, 3721, + + 2805, 3690, 3676, 3672, 3669, 3662, 2689, 3647, 3641, 3617, + 3624, 2808, 3605, 3604, 2545, 3639, 3638, 2700, 3591, 3590, + 3584, 2813, 3619, 3618, 2816, 3574, 5134, 2628, 3612, 3611, + 2823, 2560, 2341, 1719, 2824, 3335, 3347, 3333, 2832, 2582, + 2848, 5134, 3374, 2593, 5134, 3354, 2597, 2346, 2659, 2588, + 2618, 2673, 2687, 3353, 2623, 2665, 2188, 2688, 5134, 2899, + 0, 2676, 2818, 2801, 2820, 5134, 2946, 0, 3352, 3351, + 2861, 3327, 2868, 3368, 3367, 2871, 3325, 5134, 5134, 5134, + 5134, 5134, 5134, 3323, 5134, 3322, 2688, 2879, 3321, 3320, + 2906, 3318, 2836, 2888, 2672, 2840, 3318, 2913, 5134, 2904, + + 3359, 2641, 2831, 2693, 2845, 2837, 2873, 2865, 2996, 3308, + 3357, 2189, 2900, 2689, 0, 3316, 2933, 3328, 3258, 3257, + 3276, 3003, 2913, 3250, 3237, 3167, 2885, 3010, 3017, 2945, + 2276, 1870, 2932, 0, 3030, 3166, 2169, 3160, 2908, 3055, + 3111, 2903, 3134, 5134, 0, 2921, 2930, 2543, 3182, 3153, + 3024, 3023, 5134, 3002, 3033, 3032, 3166, 2994, 2942, 0, + 2891, 3168, 3015, 2953, 2957, 3170, 1323, 2998, 0, 3007, + 2855, 2772, 2684, 2638, 2584, 2846, 5134, 2590, 5134, 2542, + 2941, 3008, 3000, 2993, 0, 2471, 2473, 2402, 2370, 2277, + 2275, 2107, 2099, 5134, 2024, 3172, 1971, 1969, 2819, 2030, + + 1839, 3175, 1714, 1598, 1589, 1529, 3200, 3235, 3158, 3022, + 1523, 1525, 1334, 1308, 1228, 3256, 1128, 1112, 1046, 999, + 3259, 2278, 3262, 3258, 895, 817, 687, 5134, 679, 3162, + 3294, 615, 0, 0, 3260, 485, 3261, 2894, 428, 3248, + 5134, 308, 155, 5134, 2920, 5134, 3329, 0, 75, 0, + 0, 5134, 3381, 3402, 3423, 3444, 3465, 3486, 3507, 3528, + 3549, 3570, 3591, 3604, 3624, 3645, 3666, 3687, 3707, 3725, + 3743, 3761, 3779, 3799, 3820, 3840, 3262, 3264, 3860, 3881, + 3896, 3908, 3929, 3950, 3971, 3992, 4013, 3275, 4033, 4042, + 4063, 4084, 4105, 4126, 4135, 4156, 4177, 4198, 4219, 4240, + + 4261, 4281, 4301, 4322, 4343, 4364, 4385, 3340, 4406, 4427, + 4448, 4469, 4490, 4511, 4532, 4553, 4574, 4595, 4616, 4637, + 4658, 4679, 4700, 4721, 3342, 4742, 4763, 4784, 4805, 4826, + 4847, 4868, 4889, 4910, 4931, 4952, 4973, 4994, 5015, 5036, + 5057, 5078, 3176, 5099 + } ; + +static yyconst flex_int16_t yy_def[1045] = + { 0, + 952, 952, 953, 953, 954, 954, 955, 955, 956, 956, + 957, 957, 958, 958, 959, 959, 960, 960, 961, 961, + 962, 962, 952, 23, 952, 25, 952, 952, 952, 29, + 952, 952, 963, 952, 952, 964, 952, 964, 952, 952, + 952, 965, 965, 965, 952, 45, 966, 952, 966, 967, + 967, 952, 952, 952, 952, 968, 968, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 963, 952, 952, 952, + 952, 952, 952, 952, 963, 952, 952, 952, 952, 969, + 969, 970, 963, 970, 952, 952, 971, 952, 971, 952, + 952, 952, 972, 972, 952, 952, 973, 88, 973, 952, + + 952, 952, 952, 952, 974, 975, 976, 974, 974, 952, + 952, 110, 952, 952, 952, 952, 111, 952, 963, 952, + 963, 963, 952, 952, 117, 952, 964, 952, 127, 952, + 952, 952, 952, 952, 977, 978, 952, 952, 952, 978, + 978, 978, 978, 978, 978, 978, 978, 978, 978, 978, + 978, 978, 978, 978, 978, 952, 952, 979, 127, 952, + 952, 952, 952, 965, 965, 117, 117, 965, 45, 965, + 45, 952, 45, 966, 966, 967, 967, 952, 952, 968, + 968, 952, 952, 952, 952, 952, 980, 981, 982, 982, + 970, 89, 970, 89, 952, 952, 952, 952, 952, 952, + + 952, 952, 89, 972, 99, 99, 952, 952, 952, 99, + 952, 983, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 984, 952, 952, 952, 976, 952, 985, 952, 952, + 110, 110, 952, 952, 952, 230, 952, 952, 963, 952, + 986, 963, 963, 963, 963, 963, 963, 963, 963, 963, + 952, 987, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 988, 977, 988, 978, 978, 978, 978, 978, 978, + 978, 978, 978, 952, 978, 978, 978, 978, 978, 952, + 978, 978, 978, 978, 978, 978, 952, 978, 978, 978, + 978, 978, 978, 978, 978, 978, 978, 978, 989, 989, + + 990, 990, 991, 992, 952, 993, 952, 952, 994, 952, + 952, 965, 965, 965, 989, 989, 952, 317, 952, 952, + 952, 952, 952, 952, 981, 995, 982, 982, 995, 970, + 952, 952, 996, 997, 952, 952, 952, 952, 972, 952, + 998, 952, 952, 999, 952, 983, 983, 952, 952, 952, + 952, 952, 952, 952, 952, 1000, 952, 230, 952, 1001, + 983, 1002, 985, 952, 1002, 952, 952, 952, 1003, 1003, + 952, 963, 952, 1004, 963, 1005, 983, 1005, 963, 963, + 963, 963, 963, 963, 963, 1006, 952, 952, 952, 1007, + 952, 952, 952, 952, 952, 952, 952, 1008, 1008, 978, + + 978, 978, 978, 978, 978, 978, 978, 978, 978, 952, + 1008, 978, 978, 952, 978, 978, 978, 978, 978, 952, + 1008, 978, 978, 978, 978, 978, 978, 978, 952, 1008, + 978, 978, 978, 978, 978, 978, 978, 978, 978, 978, + 978, 978, 989, 989, 952, 989, 990, 952, 952, 952, + 952, 952, 1009, 983, 965, 994, 952, 952, 952, 989, + 989, 989, 317, 952, 952, 952, 952, 952, 995, 952, + 1003, 1003, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 1010, 952, 952, 952, 983, 1011, 952, 983, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 1012, 952, + + 952, 983, 1013, 1002, 1002, 952, 1014, 952, 1003, 1003, + 952, 1003, 952, 1015, 963, 963, 963, 1005, 983, 1016, + 963, 1005, 963, 963, 963, 963, 963, 952, 952, 1017, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 978, 978, 978, 978, 978, 978, 978, 978, 952, + 978, 978, 414, 414, 414, 978, 978, 978, 978, 952, + 952, 1018, 978, 978, 952, 978, 978, 978, 978, 978, + 952, 978, 978, 978, 978, 978, 978, 978, 978, 978, + 952, 978, 989, 952, 952, 952, 952, 1019, 952, 952, + 983, 1020, 965, 965, 952, 952, 952, 989, 952, 952, + + 952, 952, 952, 952, 1003, 1003, 1003, 952, 952, 952, + 952, 952, 581, 952, 952, 952, 952, 1021, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 1022, + 952, 952, 952, 952, 952, 1003, 1023, 963, 952, 952, + 1024, 963, 963, 963, 963, 963, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 978, 978, 978, 978, 978, + 978, 550, 978, 554, 554, 978, 550, 978, 978, 1018, + 978, 978, 978, 978, 978, 978, 952, 571, 678, 1025, + 978, 678, 978, 978, 978, 978, 978, 952, 978, 952, + 613, 1025, 978, 952, 952, 952, 952, 1026, 952, 952, + + 952, 952, 952, 952, 952, 952, 1003, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 983, 952, 952, + 952, 952, 952, 952, 983, 952, 952, 952, 963, 963, + 983, 963, 963, 963, 952, 952, 952, 952, 952, 978, + 952, 952, 1027, 978, 952, 978, 978, 978, 978, 978, + 978, 978, 978, 978, 978, 978, 978, 978, 952, 1028, + 1029, 978, 978, 978, 978, 952, 688, 767, 1025, 978, + 767, 952, 952, 952, 952, 983, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 983, 1030, 952, 952, + 983, 952, 983, 1031, 963, 963, 952, 952, 952, 952, + + 1027, 978, 978, 978, 978, 978, 978, 978, 1028, 1032, + 952, 978, 978, 978, 1033, 952, 983, 952, 952, 952, + 952, 1030, 952, 952, 952, 952, 963, 1031, 1030, 963, + 963, 963, 952, 1034, 952, 952, 952, 952, 978, 952, + 952, 978, 1032, 952, 678, 978, 978, 978, 952, 952, + 952, 952, 952, 1030, 1035, 952, 1030, 952, 952, 1036, + 963, 1031, 1030, 1037, 963, 1031, 963, 963, 1038, 952, + 952, 952, 952, 952, 952, 978, 952, 1025, 952, 1025, + 978, 978, 978, 978, 767, 952, 952, 952, 1039, 952, + 952, 952, 952, 952, 952, 1040, 963, 963, 963, 963, + + 952, 952, 952, 952, 952, 952, 952, 978, 978, 978, + 952, 952, 952, 952, 952, 1030, 952, 952, 963, 963, + 1030, 963, 963, 952, 952, 952, 952, 952, 1025, 978, + 952, 952, 1041, 1042, 1030, 952, 1030, 963, 952, 978, + 952, 1025, 952, 952, 978, 952, 978, 1043, 1043, 1044, + 1044, 0, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952 + } ; + +static yyconst flex_int16_t yy_nxt[5191] = + { 0, + 28, 29, 30, 29, 31, 28, 32, 33, 28, 28, + 28, 28, 34, 28, 34, 35, 28, 28, 28, 28, + 31, 28, 36, 28, 37, 28, 28, 38, 38, 38, + 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, + 38, 38, 38, 38, 38, 38, 38, 38, 38, 38, + 38, 39, 40, 41, 36, 38, 28, 29, 30, 29, + 42, 28, 32, 33, 43, 43, 43, 28, 34, 43, + 34, 44, 28, 43, 43, 43, 42, 28, 45, 28, + 37, 28, 43, 46, 46, 46, 46, 46, 46, 46, + 46, 46, 46, 46, 46, 46, 46, 46, 46, 46, + + 46, 46, 46, 46, 46, 46, 46, 39, 40, 41, + 45, 46, 48, 48, 48, 48, 53, 54, 53, 54, + 48, 48, 60, 60, 63, 63, 66, 950, 66, 534, + 264, 67, 535, 67, 49, 49, 51, 51, 72, 55, + 72, 55, 57, 57, 61, 61, 64, 64, 68, 72, + 68, 72, 66, 285, 72, 264, 72, 75, 73, 367, + 73, 66, 48, 48, 48, 48, 75, 351, 101, 294, + 48, 48, 120, 120, 76, 69, 70, 69, 70, 102, + 114, 115, 114, 76, 121, 116, 118, 116, 160, 160, + 160, 178, 101, 101, 101, 122, 126, 101, 179, 264, + + 101, 77, 78, 117, 102, 117, 431, 946, 102, 382, + 77, 78, 79, 80, 81, 80, 82, 79, 79, 83, + 84, 84, 84, 79, 79, 85, 79, 86, 79, 84, + 84, 84, 82, 79, 87, 79, 88, 79, 84, 89, + 89, 89, 89, 89, 89, 89, 89, 89, 89, 89, + 89, 89, 89, 89, 89, 89, 89, 89, 89, 89, + 89, 89, 89, 90, 91, 92, 87, 89, 79, 80, + 81, 80, 93, 79, 79, 83, 79, 94, 94, 79, + 79, 79, 79, 95, 79, 94, 94, 94, 96, 79, + 97, 79, 98, 79, 79, 99, 99, 99, 99, 99, + + 99, 99, 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, 99, 90, + 100, 92, 97, 99, 103, 104, 103, 105, 101, 398, + 106, 107, 108, 108, 264, 101, 109, 101, 105, 102, + 108, 108, 108, 105, 418, 110, 102, 111, 102, 108, + 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, + 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, + 112, 112, 112, 112, 101, 172, 113, 110, 112, 123, + 123, 123, 173, 127, 120, 102, 101, 128, 158, 207, + 264, 101, 120, 124, 116, 159, 288, 102, 101, 128, + + 289, 101, 125, 952, 208, 264, 163, 163, 163, 102, + 101, 116, 117, 209, 173, 127, 130, 131, 165, 132, + 133, 102, 264, 385, 952, 283, 134, 159, 383, 166, + 311, 135, 136, 137, 138, 139, 296, 140, 141, 142, + 143, 144, 145, 146, 147, 148, 136, 136, 149, 136, + 150, 151, 136, 152, 153, 154, 136, 155, 136, 146, + 136, 156, 157, 161, 161, 161, 163, 163, 163, 116, + 120, 952, 799, 264, 120, 101, 101, 131, 165, 163, + 163, 163, 131, 264, 116, 121, 162, 117, 264, 167, + 265, 165, 266, 168, 178, 264, 122, 404, 182, 178, + + 334, 183, 166, 184, 337, 267, 185, 268, 160, 160, + 160, 120, 264, 383, 401, 113, 163, 163, 163, 164, + 101, 156, 157, 164, 164, 164, 156, 157, 165, 351, + 164, 286, 164, 164, 164, 164, 287, 169, 120, 167, + 384, 170, 171, 171, 171, 171, 171, 171, 171, 171, + 171, 171, 171, 171, 171, 171, 171, 171, 171, 171, + 171, 171, 171, 171, 171, 171, 264, 120, 382, 169, + 171, 103, 104, 103, 186, 116, 276, 187, 188, 264, + 277, 116, 101, 101, 126, 186, 161, 161, 161, 952, + 186, 264, 189, 117, 111, 116, 101, 352, 101, 116, + + 952, 368, 101, 952, 126, 542, 101, 102, 287, 162, + 382, 261, 295, 117, 219, 220, 952, 117, 159, 211, + 211, 211, 264, 113, 189, 114, 115, 114, 186, 332, + 340, 187, 188, 212, 326, 333, 341, 101, 113, 186, + 214, 327, 213, 215, 186, 264, 189, 216, 111, 433, + 159, 217, 218, 264, 943, 219, 220, 221, 223, 223, + 223, 103, 104, 103, 186, 400, 264, 222, 114, 115, + 114, 186, 413, 327, 222, 186, 290, 113, 189, 191, + 186, 224, 186, 191, 191, 191, 291, 186, 101, 223, + 223, 223, 191, 191, 191, 191, 120, 192, 264, 102, + + 398, 193, 227, 227, 227, 114, 115, 114, 186, 264, + 402, 222, 224, 239, 240, 239, 228, 264, 278, 186, + 237, 237, 237, 186, 186, 229, 222, 241, 284, 192, + 195, 799, 264, 382, 186, 264, 242, 405, 138, 186, + 264, 406, 196, 238, 329, 197, 254, 254, 254, 198, + 297, 327, 199, 292, 200, 264, 293, 255, 201, 255, + 124, 202, 191, 298, 422, 423, 191, 191, 191, 256, + 264, 101, 952, 158, 264, 191, 191, 191, 191, 952, + 203, 432, 102, 327, 193, 251, 251, 251, 952, 952, + 952, 252, 257, 386, 257, 952, 403, 257, 257, 124, + + 313, 124, 299, 300, 299, 264, 952, 952, 253, 164, + 387, 313, 203, 204, 952, 423, 313, 258, 204, 204, + 307, 260, 101, 301, 264, 952, 204, 204, 204, 264, + 952, 205, 260, 102, 264, 128, 952, 260, 261, 127, + 414, 952, 214, 128, 407, 215, 415, 952, 939, 216, + 952, 164, 952, 217, 218, 301, 419, 219, 220, 221, + 173, 952, 307, 205, 204, 264, 163, 163, 163, 204, + 204, 127, 306, 101, 264, 158, 264, 204, 204, 204, + 269, 264, 210, 270, 102, 545, 128, 271, 264, 307, + 278, 272, 173, 279, 273, 952, 274, 275, 434, 280, + + 281, 264, 163, 163, 163, 568, 952, 952, 120, 282, + 164, 952, 314, 159, 210, 223, 223, 223, 108, 173, + 425, 307, 107, 108, 108, 307, 952, 108, 261, 108, + 264, 108, 108, 108, 108, 264, 523, 952, 224, 799, + 108, 223, 223, 223, 108, 159, 426, 264, 108, 108, + 108, 173, 952, 108, 952, 230, 424, 108, 108, 108, + 108, 437, 231, 952, 224, 120, 108, 232, 232, 232, + 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, + 232, 232, 232, 232, 232, 232, 232, 232, 232, 232, + 232, 369, 370, 369, 231, 232, 214, 264, 645, 215, + + 233, 937, 301, 216, 396, 397, 396, 217, 218, 438, + 264, 234, 235, 221, 120, 214, 439, 264, 215, 308, + 308, 308, 216, 349, 952, 349, 217, 218, 349, 349, + 219, 305, 221, 309, 301, 440, 163, 163, 163, 350, + 243, 952, 310, 244, 163, 163, 163, 245, 937, 952, + 312, 246, 247, 264, 352, 248, 249, 250, 450, 307, + 343, 343, 343, 299, 300, 299, 344, 307, 315, 316, + 315, 164, 264, 482, 212, 164, 164, 164, 569, 120, + 164, 212, 164, 213, 164, 164, 164, 164, 442, 317, + 483, 307, 189, 164, 318, 318, 318, 318, 318, 318, + + 318, 318, 318, 318, 318, 318, 318, 318, 318, 318, + 318, 318, 318, 318, 318, 318, 318, 318, 330, 339, + 527, 317, 318, 264, 189, 264, 264, 952, 952, 260, + 260, 346, 346, 346, 330, 260, 192, 205, 952, 952, + 223, 223, 223, 351, 408, 347, 356, 441, 409, 264, + 264, 359, 359, 359, 348, 550, 257, 360, 257, 936, + 264, 257, 257, 224, 544, 212, 264, 416, 192, 205, + 223, 223, 223, 108, 229, 417, 435, 108, 108, 108, + 559, 258, 108, 436, 108, 264, 108, 108, 108, 108, + 376, 377, 376, 224, 120, 108, 345, 361, 361, 361, + + 264, 345, 345, 345, 378, 517, 120, 345, 345, 547, + 345, 363, 345, 379, 558, 264, 264, 345, 482, 345, + 364, 345, 349, 427, 349, 357, 212, 349, 349, 578, + 935, 372, 373, 372, 526, 483, 428, 374, 350, 443, + 444, 443, 251, 251, 251, 241, 264, 345, 345, 345, + 223, 223, 223, 108, 242, 264, 124, 108, 108, 108, + 582, 543, 108, 264, 108, 253, 108, 108, 108, 108, + 491, 110, 491, 224, 414, 108, 112, 112, 112, 112, + 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, + 112, 112, 112, 112, 112, 112, 112, 112, 112, 112, + + 446, 300, 446, 110, 112, 237, 237, 237, 186, 264, + 935, 222, 343, 343, 343, 158, 120, 546, 344, 186, + 492, 264, 301, 952, 186, 120, 212, 380, 238, 380, + 327, 264, 380, 380, 264, 213, 389, 389, 389, 391, + 551, 391, 390, 381, 391, 391, 489, 255, 489, 255, + 264, 489, 489, 548, 301, 392, 552, 549, 489, 256, + 489, 357, 327, 489, 489, 934, 899, 393, 443, 444, + 443, 394, 410, 410, 410, 410, 410, 410, 410, 410, + 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, + 410, 410, 410, 411, 136, 410, 410, 410, 410, 136, + + 136, 412, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 410, 410, 410, 410, 410, 420, 420, + 420, 420, 420, 420, 420, 420, 420, 420, 420, 420, + 420, 420, 420, 420, 420, 420, 420, 420, 420, 421, + 136, 420, 420, 420, 420, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 420, + 420, 420, 420, 420, 429, 429, 429, 429, 429, 429, + 429, 429, 429, 429, 429, 429, 429, 429, 429, 429, + + 429, 429, 429, 429, 429, 430, 136, 429, 429, 429, + 429, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 429, 429, 429, 429, 429, + 452, 452, 452, 264, 264, 349, 453, 349, 311, 264, + 349, 349, 556, 557, 212, 470, 933, 264, 932, 570, + 927, 350, 327, 310, 345, 454, 454, 454, 264, 345, + 345, 345, 163, 163, 163, 345, 345, 952, 345, 456, + 345, 458, 459, 458, 566, 345, 952, 345, 457, 345, + 550, 315, 316, 315, 327, 307, 952, 460, 461, 460, + + 462, 316, 462, 306, 307, 264, 306, 396, 397, 396, + 264, 567, 952, 264, 307, 345, 345, 345, 264, 952, + 307, 579, 264, 307, 163, 163, 163, 164, 926, 264, + 952, 164, 164, 164, 550, 491, 164, 491, 164, 550, + 164, 164, 164, 164, 925, 317, 571, 307, 575, 164, + 463, 463, 463, 463, 463, 463, 463, 463, 463, 463, + 463, 463, 463, 463, 463, 463, 463, 463, 463, 463, + 463, 463, 463, 463, 471, 472, 471, 317, 463, 396, + 397, 396, 264, 264, 952, 492, 486, 486, 486, 530, + 264, 952, 487, 580, 255, 189, 255, 357, 488, 346, + + 346, 346, 952, 343, 343, 343, 531, 576, 574, 348, + 350, 488, 541, 347, 541, 264, 264, 212, 223, 223, + 223, 120, 348, 572, 499, 573, 213, 189, 497, 497, + 497, 105, 212, 540, 106, 107, 659, 502, 502, 502, + 264, 500, 105, 503, 223, 223, 223, 105, 264, 488, + 120, 498, 369, 370, 369, 581, 504, 796, 577, 799, + 364, 643, 509, 510, 509, 540, 264, 224, 356, 524, + 120, 524, 524, 120, 524, 224, 550, 376, 377, 376, + 113, 345, 361, 361, 361, 224, 345, 345, 345, 521, + 264, 378, 345, 345, 505, 345, 363, 345, 120, 120, + + 379, 120, 345, 514, 345, 364, 345, 512, 370, 512, + 599, 241, 599, 356, 662, 518, 519, 518, 264, 525, + 515, 520, 525, 486, 486, 486, 120, 521, 381, 487, + 224, 264, 345, 345, 345, 488, 646, 522, 379, 522, + 671, 924, 522, 522, 264, 264, 348, 372, 373, 372, + 656, 389, 389, 389, 538, 539, 538, 583, 300, 583, + 600, 241, 255, 657, 255, 583, 444, 583, 264, 675, + 242, 261, 120, 264, 256, 540, 120, 660, 301, 163, + 163, 163, 591, 591, 591, 588, 618, 517, 592, 471, + 472, 471, 488, 212, 488, 489, 264, 489, 311, 763, + + 489, 489, 589, 952, 868, 457, 661, 540, 553, 553, + 301, 553, 553, 553, 553, 553, 553, 553, 553, 553, + 553, 553, 553, 553, 553, 553, 553, 553, 553, 554, + 555, 553, 553, 553, 553, 555, 555, 555, 555, 555, + 555, 555, 555, 555, 555, 555, 555, 555, 555, 555, + 555, 555, 555, 555, 555, 555, 555, 555, 555, 264, + 553, 553, 553, 553, 560, 561, 560, 163, 163, 163, + 562, 921, 952, 921, 486, 486, 486, 663, 264, 593, + 595, 596, 595, 233, 264, 618, 306, 460, 461, 460, + 307, 488, 392, 306, 625, 626, 563, 348, 564, 550, + + 264, 540, 952, 307, 393, 491, 120, 491, 394, 668, + 307, 223, 223, 223, 565, 345, 454, 454, 454, 264, + 345, 345, 345, 223, 223, 223, 345, 345, 594, 345, + 456, 345, 120, 540, 224, 504, 345, 853, 345, 457, + 345, 597, 163, 597, 658, 644, 224, 306, 598, 316, + 598, 598, 461, 598, 306, 492, 264, 306, 640, 605, + 606, 605, 540, 641, 307, 952, 345, 345, 345, 521, + 264, 307, 923, 264, 307, 264, 666, 607, 472, 607, + 119, 685, 952, 952, 264, 497, 497, 497, 186, 667, + 264, 222, 672, 264, 540, 497, 497, 497, 186, 186, + + 952, 187, 188, 673, 186, 497, 497, 497, 186, 186, + 676, 222, 264, 264, 186, 669, 189, 264, 498, 186, + 629, 629, 629, 687, 186, 572, 630, 509, 510, 509, + 264, 684, 488, 356, 636, 370, 636, 518, 519, 518, + 356, 918, 917, 224, 524, 120, 524, 113, 189, 655, + 224, 655, 636, 510, 636, 674, 120, 224, 356, 541, + 379, 541, 251, 251, 251, 538, 539, 538, 252, 264, + 540, 264, 264, 264, 264, 224, 124, 123, 123, 123, + 540, 264, 120, 120, 689, 253, 540, 264, 311, 683, + 264, 124, 686, 730, 525, 688, 547, 264, 740, 732, + + 253, 350, 540, 264, 547, 583, 444, 583, 734, 264, + 264, 873, 540, 748, 874, 808, 846, 760, 540, 410, + 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, + 410, 410, 410, 410, 410, 410, 410, 410, 410, 410, + 411, 136, 410, 410, 410, 410, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 410, 410, 410, 410, 410, 553, 553, 916, 120, 916, + 120, 553, 553, 553, 553, 553, 553, 553, 553, 553, + 553, 553, 553, 553, 553, 553, 553, 553, 553, 553, + + 553, 553, 553, 553, 553, 664, 665, 867, 599, 938, + 599, 665, 665, 665, 665, 665, 665, 665, 665, 665, + 665, 665, 665, 665, 665, 665, 665, 665, 665, 665, + 665, 665, 665, 665, 665, 560, 561, 560, 163, 163, + 163, 562, 264, 120, 306, 697, 697, 697, 163, 163, + 163, 698, 386, 952, 163, 163, 163, 488, 600, 952, + 124, 307, 264, 746, 264, 264, 593, 264, 307, 387, + 264, 307, 264, 747, 264, 550, 749, 307, 550, 752, + 795, 757, 750, 915, 550, 565, 677, 678, 679, 678, + 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, + + 677, 677, 677, 677, 677, 677, 677, 680, 681, 677, + 682, 677, 677, 681, 681, 681, 681, 681, 681, 681, + 681, 681, 681, 681, 681, 681, 681, 681, 681, 681, + 681, 681, 681, 681, 681, 681, 681, 677, 677, 677, + 677, 677, 690, 690, 913, 690, 690, 690, 690, 690, + 690, 690, 690, 691, 690, 690, 690, 690, 690, 690, + 690, 690, 690, 692, 693, 690, 690, 690, 690, 693, + 693, 693, 693, 693, 693, 693, 693, 693, 693, 693, + 693, 693, 693, 693, 693, 693, 693, 693, 693, 693, + 693, 693, 693, 690, 690, 690, 690, 690, 595, 596, + + 595, 701, 163, 701, 306, 264, 120, 306, 597, 163, + 597, 598, 461, 598, 306, 912, 911, 306, 655, 540, + 655, 307, 540, 762, 307, 264, 605, 606, 605, 540, + 264, 307, 952, 264, 307, 707, 472, 707, 264, 540, + 264, 952, 707, 606, 707, 264, 754, 264, 952, 952, + 733, 540, 482, 755, 540, 765, 758, 764, 952, 756, + 212, 540, 120, 398, 264, 952, 690, 690, 547, 483, + 884, 540, 690, 690, 690, 690, 690, 690, 690, 690, + 690, 690, 690, 690, 690, 690, 690, 690, 690, 690, + 690, 690, 690, 690, 690, 690, 343, 343, 343, 223, + + 223, 223, 344, 264, 794, 356, 359, 359, 359, 264, + 212, 398, 360, 550, 264, 223, 223, 223, 264, 213, + 212, 356, 224, 906, 636, 510, 636, 485, 550, 229, + 356, 343, 343, 343, 803, 482, 802, 344, 224, 264, + 389, 389, 389, 212, 264, 212, 390, 224, 759, 804, + 759, 255, 483, 255, 213, 741, 742, 741, 677, 952, + 677, 743, 264, 256, 677, 161, 161, 161, 264, 806, + 452, 452, 452, 905, 120, 264, 453, 163, 163, 163, + 264, 677, 839, 306, 212, 264, 264, 744, 772, 485, + 707, 606, 707, 310, 264, 618, 952, 264, 759, 550, + + 307, 486, 486, 486, 550, 745, 761, 487, 264, 264, + 264, 807, 952, 952, 264, 812, 831, 113, 805, 675, + 677, 677, 904, 848, 348, 550, 677, 677, 677, 677, + 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, + 677, 677, 677, 677, 677, 677, 677, 677, 677, 677, + 766, 767, 768, 767, 766, 766, 766, 766, 766, 766, + 766, 766, 766, 766, 766, 766, 766, 766, 766, 766, + 766, 769, 770, 766, 771, 766, 766, 770, 770, 770, + 770, 770, 770, 770, 770, 770, 770, 770, 770, 770, + 770, 770, 770, 770, 770, 770, 770, 770, 770, 770, + + 770, 766, 766, 766, 766, 766, 701, 163, 701, 161, + 161, 161, 306, 903, 223, 223, 223, 502, 502, 502, + 499, 120, 264, 503, 486, 486, 486, 540, 212, 307, + 487, 530, 772, 798, 798, 798, 255, 500, 255, 264, + 364, 264, 120, 618, 799, 814, 799, 348, 531, 741, + 742, 741, 264, 813, 922, 743, 800, 902, 264, 540, + 952, 113, 766, 952, 766, 550, 264, 264, 766, 163, + 163, 163, 591, 591, 591, 588, 550, 550, 592, 840, + 822, 822, 822, 212, 832, 766, 264, 120, 907, 828, + 829, 828, 589, 120, 264, 457, 120, 842, 861, 745, + + 810, 810, 810, 823, 810, 810, 810, 629, 629, 629, + 810, 810, 830, 630, 833, 833, 833, 835, 841, 835, + 834, 264, 835, 835, 264, 799, 857, 799, 857, 264, + 224, 857, 857, 836, 697, 697, 697, 800, 382, 869, + 698, 264, 264, 847, 799, 837, 799, 120, 881, 838, + 810, 264, 810, 815, 876, 120, 870, 307, 866, 120, + 866, 882, 264, 866, 866, 947, 898, 766, 766, 893, + 861, 883, 908, 766, 766, 766, 766, 766, 766, 766, + 766, 766, 766, 766, 766, 766, 766, 766, 766, 766, + 766, 766, 766, 766, 766, 766, 766, 810, 810, 810, + + 120, 810, 810, 810, 854, 854, 854, 810, 810, 889, + 855, 862, 863, 862, 264, 856, 856, 864, 854, 854, + 854, 264, 889, 865, 855, 900, 952, 823, 856, 264, + 856, 833, 833, 833, 830, 910, 836, 892, 414, 952, + 909, 823, 799, 264, 799, 853, 891, 810, 837, 810, + 888, 887, 838, 931, 800, 877, 877, 877, 877, 877, + 877, 877, 877, 877, 877, 877, 877, 877, 877, 877, + 877, 877, 877, 877, 877, 877, 878, 136, 877, 877, + 877, 877, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + + 136, 136, 136, 136, 136, 136, 877, 877, 877, 877, + 877, 879, 879, 879, 879, 879, 879, 879, 879, 879, + 879, 879, 879, 879, 879, 879, 879, 879, 879, 879, + 879, 879, 880, 136, 879, 879, 879, 879, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 879, 879, 879, 879, 879, 854, 854, 854, + 895, 862, 863, 862, 120, 896, 833, 833, 833, 264, + 886, 865, 834, 264, 885, 920, 844, 799, 949, 799, + 823, 949, 119, 940, 830, 875, 872, 930, 860, 800, + + 928, 928, 928, 928, 928, 928, 928, 928, 928, 928, + 928, 928, 928, 928, 928, 928, 928, 928, 928, 928, + 928, 929, 136, 928, 928, 928, 928, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 928, 928, 928, 928, 928, 264, 854, 854, 854, + 854, 854, 854, 855, 120, 869, 855, 889, 889, 264, + 799, 859, 799, 263, 263, 136, 136, 263, 550, 136, + 823, 858, 870, 823, 952, 952, 399, 399, 945, 853, + 399, 852, 851, 382, 941, 941, 941, 941, 941, 941, + + 941, 941, 941, 941, 941, 941, 941, 941, 941, 941, + 941, 941, 941, 941, 941, 942, 136, 941, 941, 941, + 941, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 136, 136, 136, 136, 136, + 136, 136, 136, 136, 136, 941, 941, 941, 941, 941, + 264, 399, 399, 399, 399, 399, 850, 399, 450, 845, + 844, 742, 255, 826, 825, 824, 820, 819, 818, 817, + 817, 816, 264, 398, 264, 264, 742, 255, 797, 255, + 948, 47, 47, 47, 47, 47, 47, 47, 47, 47, + 47, 47, 47, 47, 47, 47, 47, 47, 47, 47, + + 47, 47, 50, 50, 50, 50, 50, 50, 50, 50, + 50, 50, 50, 50, 50, 50, 50, 50, 50, 50, + 50, 50, 50, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 52, 52, 52, 52, 52, 52, + 52, 52, 52, 52, 56, 56, 56, 56, 56, 56, + 56, 56, 56, 56, 56, 56, 56, 56, 56, 56, + 56, 56, 56, 56, 56, 48, 48, 48, 48, 48, + 48, 48, 48, 48, 48, 48, 48, 48, 48, 48, + 48, 48, 48, 48, 48, 48, 59, 59, 59, 59, + 59, 59, 59, 59, 59, 59, 59, 59, 59, 59, + + 59, 59, 59, 59, 59, 59, 59, 62, 62, 62, + 62, 62, 62, 62, 62, 62, 62, 62, 62, 62, + 62, 62, 62, 62, 62, 62, 62, 62, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 71, + 71, 71, 71, 71, 71, 71, 71, 71, 71, 71, + 71, 71, 71, 71, 71, 71, 71, 71, 71, 71, + 74, 74, 74, 74, 74, 74, 74, 74, 74, 74, + 74, 74, 74, 74, 74, 74, 74, 74, 74, 74, + 74, 119, 119, 119, 119, 119, 119, 119, 119, 119, + + 119, 119, 119, 119, 119, 119, 119, 119, 119, 119, + 119, 119, 129, 793, 793, 792, 129, 129, 129, 129, + 791, 791, 790, 129, 129, 164, 164, 164, 164, 789, + 164, 164, 164, 164, 164, 788, 164, 164, 164, 164, + 787, 787, 786, 164, 164, 174, 174, 785, 174, 174, + 174, 174, 174, 174, 174, 174, 174, 174, 174, 174, + 174, 174, 784, 174, 174, 174, 176, 176, 760, 176, + 176, 176, 176, 176, 176, 176, 176, 176, 176, 176, + 176, 176, 176, 783, 176, 176, 176, 180, 180, 782, + 180, 180, 180, 180, 180, 180, 180, 180, 180, 180, + + 180, 180, 180, 180, 781, 180, 180, 180, 190, 190, + 190, 780, 190, 190, 779, 190, 190, 190, 778, 190, + 190, 777, 190, 776, 776, 190, 190, 190, 191, 191, + 775, 191, 191, 191, 773, 191, 113, 191, 191, 191, + 191, 264, 398, 690, 191, 191, 194, 264, 398, 194, + 194, 194, 561, 194, 753, 194, 194, 194, 194, 751, + 739, 738, 194, 194, 204, 204, 737, 736, 204, 204, + 255, 735, 731, 204, 204, 731, 204, 485, 728, 113, + 204, 204, 206, 726, 725, 725, 206, 206, 724, 722, + 368, 206, 206, 206, 206, 367, 721, 720, 206, 206, + + 108, 108, 108, 719, 718, 108, 108, 108, 108, 108, + 718, 108, 108, 108, 108, 717, 715, 714, 108, 108, + 225, 225, 713, 225, 225, 225, 225, 225, 225, 225, + 225, 225, 225, 225, 225, 225, 225, 225, 225, 225, + 225, 226, 226, 226, 712, 711, 226, 226, 226, 226, + 226, 710, 226, 226, 226, 226, 709, 708, 706, 226, + 226, 302, 302, 705, 704, 703, 702, 700, 696, 694, + 304, 303, 302, 561, 654, 302, 653, 652, 651, 302, + 302, 324, 324, 650, 324, 324, 324, 324, 324, 324, + 324, 324, 324, 324, 324, 324, 324, 324, 324, 324, + + 324, 324, 325, 649, 647, 120, 120, 639, 325, 120, + 637, 325, 635, 633, 632, 325, 325, 328, 628, 624, + 328, 623, 622, 328, 621, 485, 620, 328, 328, 345, + 345, 345, 345, 345, 345, 345, 345, 345, 345, 345, + 345, 345, 345, 345, 345, 345, 345, 345, 345, 345, + 355, 355, 617, 355, 355, 355, 355, 355, 355, 355, + 355, 355, 355, 355, 355, 355, 355, 355, 355, 355, + 355, 362, 362, 362, 362, 362, 362, 362, 362, 362, + 362, 362, 362, 362, 362, 362, 362, 362, 362, 362, + 362, 362, 375, 375, 375, 375, 375, 375, 375, 375, + + 375, 375, 375, 375, 375, 375, 375, 375, 375, 375, + 375, 375, 375, 388, 388, 350, 388, 388, 388, 388, + 388, 388, 388, 388, 388, 388, 388, 388, 388, 388, + 388, 388, 388, 388, 445, 445, 615, 614, 613, 612, + 611, 610, 609, 608, 604, 603, 602, 601, 445, 314, + 587, 586, 585, 445, 447, 584, 398, 447, 398, 398, + 398, 447, 447, 448, 448, 398, 448, 448, 448, 448, + 448, 448, 448, 448, 448, 448, 448, 448, 448, 448, + 448, 448, 448, 448, 449, 449, 537, 449, 449, 449, + 449, 449, 449, 449, 449, 449, 449, 449, 449, 449, + + 449, 449, 449, 449, 449, 451, 451, 536, 451, 451, + 451, 451, 451, 451, 451, 451, 451, 451, 451, 451, + 451, 451, 451, 451, 451, 451, 455, 455, 455, 455, + 455, 455, 455, 455, 455, 455, 455, 455, 455, 455, + 455, 455, 455, 455, 455, 455, 455, 190, 533, 529, + 190, 258, 120, 513, 190, 190, 475, 475, 475, 475, + 475, 475, 475, 475, 475, 475, 475, 475, 508, 475, + 475, 507, 475, 475, 475, 475, 475, 429, 429, 429, + 429, 429, 429, 429, 429, 429, 429, 429, 429, 506, + 429, 429, 495, 429, 429, 429, 429, 429, 420, 420, + + 420, 420, 420, 420, 420, 420, 420, 420, 420, 420, + 494, 420, 420, 493, 420, 420, 420, 420, 420, 484, + 484, 490, 484, 484, 484, 484, 484, 484, 484, 484, + 484, 484, 484, 484, 484, 484, 484, 484, 484, 484, + 496, 496, 485, 496, 496, 496, 496, 496, 496, 496, + 496, 496, 496, 496, 496, 496, 496, 496, 496, 496, + 496, 501, 501, 481, 501, 501, 501, 501, 501, 501, + 501, 501, 501, 501, 501, 501, 501, 501, 501, 501, + 501, 501, 108, 108, 108, 480, 479, 108, 108, 108, + 108, 108, 478, 108, 108, 108, 108, 477, 476, 474, + + 108, 108, 511, 511, 473, 952, 511, 469, 468, 467, + 466, 465, 464, 172, 511, 311, 511, 398, 262, 398, + 395, 511, 516, 516, 516, 516, 516, 516, 516, 516, + 516, 516, 516, 516, 516, 516, 516, 516, 516, 516, + 516, 516, 516, 375, 375, 375, 375, 375, 375, 375, + 375, 375, 375, 375, 375, 375, 375, 375, 375, 375, + 375, 375, 375, 375, 528, 528, 371, 528, 528, 528, + 528, 528, 528, 528, 528, 528, 528, 528, 528, 528, + 528, 528, 528, 528, 528, 532, 532, 366, 532, 532, + 532, 532, 532, 532, 532, 532, 532, 532, 532, 532, + + 532, 532, 532, 532, 532, 532, 590, 590, 365, 590, + 590, 590, 590, 590, 590, 590, 590, 590, 590, 590, + 590, 590, 590, 590, 590, 590, 590, 616, 616, 108, + 616, 616, 616, 616, 616, 616, 616, 616, 616, 616, + 616, 616, 616, 616, 616, 616, 616, 616, 619, 619, + 358, 619, 619, 619, 619, 619, 619, 619, 619, 619, + 619, 619, 619, 619, 619, 619, 619, 619, 619, 627, + 627, 357, 627, 627, 627, 627, 627, 627, 627, 627, + 627, 627, 627, 627, 627, 627, 627, 627, 627, 627, + 631, 631, 351, 631, 631, 631, 631, 631, 631, 631, + + 631, 631, 631, 631, 631, 631, 631, 631, 631, 631, + 631, 634, 634, 634, 634, 634, 634, 634, 634, 634, + 634, 634, 634, 352, 634, 634, 351, 634, 634, 634, + 634, 634, 638, 638, 638, 638, 638, 638, 638, 638, + 638, 638, 638, 638, 638, 638, 638, 638, 638, 638, + 638, 638, 638, 642, 642, 642, 642, 642, 642, 642, + 642, 642, 642, 642, 642, 642, 642, 642, 642, 642, + 642, 642, 642, 642, 648, 648, 354, 648, 648, 648, + 648, 648, 648, 648, 648, 648, 648, 648, 648, 648, + 648, 648, 648, 648, 648, 670, 670, 670, 670, 670, + + 670, 670, 670, 670, 670, 670, 670, 670, 670, 670, + 670, 670, 670, 670, 670, 670, 695, 695, 353, 695, + 695, 695, 695, 695, 695, 695, 695, 695, 695, 695, + 695, 695, 695, 695, 695, 695, 695, 699, 699, 352, + 699, 699, 699, 699, 699, 699, 699, 699, 699, 699, + 699, 699, 699, 699, 699, 699, 699, 699, 716, 716, + 351, 716, 716, 716, 716, 716, 716, 716, 716, 716, + 716, 716, 716, 716, 716, 716, 716, 716, 716, 723, + 723, 351, 723, 723, 723, 723, 723, 723, 723, 723, + 723, 723, 723, 723, 723, 723, 723, 723, 723, 723, + + 727, 727, 727, 727, 727, 727, 727, 727, 727, 727, + 727, 727, 342, 727, 727, 338, 727, 727, 727, 727, + 727, 729, 729, 729, 729, 729, 729, 729, 729, 729, + 729, 729, 729, 729, 729, 729, 729, 729, 729, 729, + 729, 729, 774, 774, 336, 774, 774, 774, 774, 774, + 774, 774, 774, 774, 774, 774, 774, 774, 774, 774, + 774, 774, 774, 801, 801, 801, 801, 801, 801, 801, + 801, 801, 801, 801, 801, 801, 801, 801, 801, 801, + 801, 801, 801, 801, 809, 809, 809, 809, 809, 809, + 809, 809, 809, 809, 809, 809, 809, 809, 809, 809, + + 809, 335, 809, 809, 809, 811, 811, 334, 811, 811, + 811, 811, 811, 811, 811, 811, 811, 811, 811, 811, + 811, 811, 811, 811, 811, 811, 821, 821, 821, 821, + 821, 821, 821, 821, 821, 821, 821, 821, 821, 821, + 821, 821, 821, 821, 821, 821, 821, 827, 827, 827, + 827, 827, 827, 827, 827, 827, 827, 827, 827, 827, + 827, 827, 827, 827, 827, 827, 827, 827, 843, 843, + 843, 843, 843, 331, 843, 843, 843, 843, 843, 843, + 843, 843, 843, 843, 843, 843, 843, 843, 843, 849, + 849, 188, 849, 849, 849, 849, 849, 849, 849, 849, + + 849, 849, 849, 849, 849, 849, 849, 849, 849, 849, + 871, 871, 323, 871, 871, 871, 871, 871, 871, 871, + 871, 871, 871, 871, 871, 871, 871, 871, 871, 871, + 871, 890, 890, 322, 890, 890, 890, 890, 890, 890, + 890, 890, 890, 890, 890, 890, 890, 890, 890, 890, + 890, 890, 894, 894, 894, 894, 894, 894, 894, 894, + 894, 894, 894, 894, 321, 894, 894, 320, 894, 894, + 894, 894, 894, 897, 897, 897, 897, 897, 897, 897, + 897, 897, 897, 897, 897, 897, 897, 897, 897, 897, + 897, 897, 897, 897, 901, 901, 319, 901, 901, 901, + + 901, 901, 901, 901, 901, 901, 901, 901, 901, 901, + 901, 901, 901, 901, 901, 914, 914, 311, 914, 914, + 914, 914, 914, 914, 914, 914, 914, 914, 914, 914, + 914, 914, 914, 914, 914, 914, 919, 919, 919, 919, + 919, 919, 919, 919, 919, 919, 919, 919, 919, 919, + 919, 919, 919, 919, 919, 919, 919, 944, 944, 944, + 944, 944, 944, 944, 944, 944, 944, 944, 944, 304, + 944, 944, 303, 944, 944, 944, 944, 944, 941, 941, + 941, 941, 941, 941, 941, 941, 941, 941, 941, 941, + 264, 941, 941, 262, 941, 941, 941, 941, 941, 951, + + 951, 259, 951, 951, 951, 951, 951, 951, 951, 951, + 951, 951, 951, 951, 951, 120, 951, 951, 951, 951, + 236, 120, 178, 120, 178, 178, 178, 181, 177, 175, + 952, 58, 58, 27, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952 + } ; + +static yyconst flex_int16_t yy_chk[5191] = + { 0, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 3, 4, 5, 6, 7, 7, 8, 8, + 9, 10, 13, 14, 15, 16, 17, 949, 18, 393, + 147, 17, 393, 18, 3, 4, 5, 6, 19, 7, + 20, 8, 9, 10, 13, 14, 15, 16, 17, 19, + 18, 20, 21, 147, 19, 152, 20, 21, 19, 234, + 20, 22, 3, 4, 5, 6, 22, 234, 28, 152, + 9, 10, 244, 33, 21, 17, 17, 18, 18, 28, + 30, 30, 30, 22, 33, 31, 32, 35, 39, 39, + 39, 55, 31, 32, 35, 33, 35, 40, 55, 288, + + 39, 21, 21, 31, 32, 35, 288, 943, 40, 244, + 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 23, 23, + 23, 23, 23, 23, 23, 23, 23, 23, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 25, 25, 25, 25, 25, 25, + 25, 25, 25, 25, 29, 29, 29, 29, 79, 942, + 29, 29, 29, 29, 278, 85, 29, 91, 29, 79, + 29, 29, 29, 29, 278, 29, 85, 29, 91, 29, + 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, + 29, 29, 29, 29, 29, 29, 29, 29, 29, 29, + 29, 29, 29, 29, 36, 46, 29, 29, 29, 34, + 34, 34, 46, 36, 247, 36, 38, 36, 38, 98, + 149, 34, 249, 34, 82, 38, 149, 38, 100, 38, + + 149, 82, 34, 84, 98, 145, 42, 42, 42, 100, + 84, 42, 82, 98, 46, 36, 37, 37, 42, 37, + 37, 84, 154, 247, 167, 145, 37, 38, 249, 42, + 167, 37, 37, 37, 37, 37, 154, 37, 37, 37, + 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, + 37, 37, 37, 37, 37, 37, 37, 37, 37, 37, + 37, 37, 37, 41, 41, 41, 43, 43, 43, 93, + 245, 43, 939, 269, 83, 41, 93, 68, 43, 44, + 44, 44, 76, 140, 44, 83, 41, 93, 266, 43, + 140, 44, 140, 44, 68, 141, 83, 269, 68, 76, + + 201, 68, 44, 76, 201, 141, 76, 141, 90, 90, + 90, 246, 148, 245, 266, 41, 45, 45, 45, 45, + 90, 68, 68, 45, 45, 45, 76, 76, 45, 936, + 45, 148, 45, 45, 45, 45, 148, 45, 243, 45, + 246, 45, 45, 45, 45, 45, 45, 45, 45, 45, + 45, 45, 45, 45, 45, 45, 45, 45, 45, 45, + 45, 45, 45, 45, 45, 45, 143, 250, 243, 45, + 45, 80, 80, 80, 80, 86, 143, 80, 80, 400, + 143, 117, 86, 80, 86, 80, 92, 92, 92, 94, + 80, 153, 80, 86, 80, 95, 94, 235, 92, 96, + + 129, 235, 95, 117, 95, 400, 96, 94, 153, 92, + 250, 129, 153, 95, 117, 117, 129, 96, 129, 101, + 101, 101, 290, 80, 80, 81, 81, 81, 81, 197, + 208, 81, 81, 101, 189, 197, 208, 81, 92, 81, + 102, 189, 101, 102, 81, 265, 81, 102, 81, 290, + 129, 102, 102, 275, 932, 102, 102, 102, 105, 105, + 105, 103, 103, 103, 103, 265, 150, 103, 104, 104, + 104, 104, 275, 189, 104, 103, 150, 81, 81, 87, + 103, 105, 104, 87, 87, 87, 150, 104, 87, 108, + 108, 108, 87, 87, 87, 87, 248, 87, 267, 87, + + 929, 87, 109, 109, 109, 114, 114, 114, 114, 146, + 267, 114, 108, 121, 121, 121, 109, 270, 146, 114, + 115, 115, 115, 115, 114, 109, 115, 121, 146, 87, + 88, 927, 151, 248, 115, 271, 121, 270, 88, 115, + 155, 271, 88, 115, 190, 88, 124, 124, 124, 88, + 155, 190, 88, 151, 88, 281, 151, 124, 88, 124, + 124, 88, 89, 155, 281, 281, 89, 89, 89, 124, + 289, 89, 191, 89, 268, 89, 89, 89, 89, 191, + 89, 289, 89, 190, 89, 123, 123, 123, 193, 125, + 191, 123, 125, 251, 125, 193, 268, 125, 125, 123, + + 169, 251, 158, 158, 158, 284, 193, 204, 123, 169, + 251, 169, 89, 97, 204, 284, 169, 125, 97, 97, + 169, 127, 97, 158, 272, 204, 97, 97, 97, 276, + 127, 97, 127, 97, 279, 97, 194, 127, 194, 127, + 276, 127, 138, 127, 272, 138, 276, 194, 926, 138, + 203, 173, 203, 138, 138, 158, 279, 138, 138, 138, + 173, 203, 173, 97, 99, 403, 163, 163, 163, 99, + 99, 127, 163, 99, 142, 99, 291, 99, 99, 99, + 142, 144, 99, 142, 99, 403, 99, 142, 427, 163, + 144, 142, 173, 144, 142, 159, 142, 142, 291, 144, + + 144, 283, 164, 164, 164, 427, 159, 164, 381, 144, + 171, 159, 171, 159, 99, 107, 107, 107, 107, 171, + 283, 171, 107, 107, 107, 164, 206, 107, 206, 107, + 285, 107, 107, 107, 107, 282, 381, 206, 107, 925, + 107, 110, 110, 110, 110, 159, 285, 293, 110, 110, + 110, 171, 210, 110, 210, 110, 282, 110, 110, 110, + 110, 293, 110, 210, 110, 526, 110, 110, 110, 110, + 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, + 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, + 110, 236, 236, 236, 110, 110, 111, 294, 526, 111, + + 111, 920, 301, 111, 260, 260, 260, 111, 111, 294, + 295, 111, 111, 111, 122, 162, 295, 296, 162, 165, + 165, 165, 162, 213, 165, 213, 162, 162, 213, 213, + 162, 162, 162, 165, 301, 296, 168, 168, 168, 213, + 122, 168, 165, 122, 170, 170, 170, 122, 919, 170, + 168, 122, 122, 428, 305, 122, 122, 122, 305, 168, + 211, 211, 211, 261, 261, 261, 211, 170, 172, 172, + 172, 172, 298, 343, 211, 172, 172, 172, 428, 385, + 172, 343, 172, 211, 172, 172, 172, 172, 298, 172, + 343, 172, 326, 172, 172, 172, 172, 172, 172, 172, + + 172, 172, 172, 172, 172, 172, 172, 172, 172, 172, + 172, 172, 172, 172, 172, 172, 172, 172, 192, 205, + 385, 172, 172, 273, 326, 297, 408, 192, 205, 192, + 205, 212, 212, 212, 192, 205, 192, 205, 192, 205, + 223, 223, 223, 918, 273, 212, 223, 297, 273, 277, + 402, 227, 227, 227, 212, 408, 253, 227, 253, 917, + 419, 253, 253, 223, 402, 227, 292, 277, 192, 205, + 226, 226, 226, 226, 227, 277, 292, 226, 226, 226, + 419, 253, 226, 292, 226, 405, 226, 226, 226, 226, + 241, 241, 241, 226, 375, 226, 228, 228, 228, 228, + + 417, 228, 228, 228, 241, 375, 384, 228, 228, 405, + 228, 228, 228, 241, 417, 286, 438, 228, 373, 228, + 228, 228, 229, 286, 229, 229, 373, 229, 229, 438, + 915, 239, 239, 239, 384, 373, 286, 239, 229, 299, + 299, 299, 257, 257, 257, 239, 442, 228, 228, 228, + 230, 230, 230, 230, 239, 401, 257, 230, 230, 230, + 442, 401, 230, 418, 230, 257, 230, 230, 230, 230, + 351, 230, 351, 230, 418, 230, 230, 230, 230, 230, + 230, 230, 230, 230, 230, 230, 230, 230, 230, 230, + 230, 230, 230, 230, 230, 230, 230, 230, 230, 230, + + 300, 300, 300, 230, 230, 237, 237, 237, 237, 404, + 914, 237, 240, 240, 240, 302, 242, 404, 240, 237, + 351, 409, 302, 327, 237, 867, 240, 242, 237, 242, + 327, 406, 242, 242, 407, 240, 254, 254, 254, 256, + 409, 256, 254, 242, 256, 256, 348, 254, 348, 254, + 413, 348, 348, 406, 302, 256, 413, 407, 364, 254, + 364, 364, 327, 364, 364, 913, 867, 256, 443, 443, + 443, 256, 274, 274, 274, 274, 274, 274, 274, 274, + 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, + 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, + + 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, + 274, 274, 274, 274, 274, 274, 274, 274, 274, 274, + 274, 274, 274, 274, 274, 274, 274, 274, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 280, 280, 280, 280, 280, 280, + 280, 280, 280, 280, 287, 287, 287, 287, 287, 287, + 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, + + 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, + 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, + 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, + 287, 287, 287, 287, 287, 287, 287, 287, 287, 287, + 308, 308, 308, 416, 415, 310, 308, 310, 310, 431, + 310, 310, 415, 416, 308, 328, 912, 423, 911, 431, + 906, 310, 328, 308, 309, 309, 309, 309, 412, 309, + 309, 309, 312, 312, 312, 309, 309, 312, 309, 309, + 309, 313, 313, 313, 423, 309, 313, 309, 309, 309, + 412, 314, 314, 314, 328, 312, 314, 315, 315, 315, + + 316, 316, 316, 315, 313, 424, 316, 330, 330, 330, + 425, 424, 330, 439, 314, 309, 309, 309, 426, 330, + 315, 439, 432, 316, 317, 317, 317, 317, 905, 435, + 330, 317, 317, 317, 425, 352, 317, 352, 317, 426, + 317, 317, 317, 317, 904, 317, 432, 317, 435, 317, + 317, 317, 317, 317, 317, 317, 317, 317, 317, 317, + 317, 317, 317, 317, 317, 317, 317, 317, 317, 317, + 317, 317, 317, 317, 329, 329, 329, 317, 317, 339, + 339, 339, 436, 440, 339, 352, 346, 346, 346, 389, + 434, 339, 346, 440, 389, 329, 389, 500, 346, 347, + + 347, 347, 339, 349, 349, 349, 389, 436, 434, 346, + 500, 347, 397, 347, 397, 433, 546, 349, 359, 359, + 359, 734, 347, 433, 359, 433, 349, 329, 358, 358, + 358, 358, 359, 397, 358, 358, 546, 361, 361, 361, + 437, 359, 358, 361, 362, 362, 362, 358, 441, 361, + 520, 358, 365, 365, 365, 441, 362, 734, 437, 903, + 361, 520, 369, 369, 369, 397, 542, 362, 369, 382, + 382, 382, 383, 383, 383, 365, 542, 378, 378, 378, + 358, 363, 363, 363, 363, 369, 363, 363, 363, 378, + 551, 378, 363, 363, 363, 363, 363, 363, 372, 527, + + 378, 515, 363, 372, 363, 363, 363, 370, 370, 370, + 464, 372, 464, 370, 551, 376, 376, 376, 563, 382, + 372, 376, 383, 377, 377, 377, 379, 376, 515, 377, + 370, 543, 363, 363, 363, 377, 527, 379, 376, 379, + 563, 901, 379, 379, 544, 569, 377, 380, 380, 380, + 543, 391, 391, 391, 396, 396, 396, 444, 444, 444, + 464, 380, 391, 544, 391, 446, 446, 446, 548, 569, + 380, 447, 832, 684, 391, 396, 521, 548, 447, 452, + 452, 452, 454, 454, 454, 452, 486, 521, 454, 470, + 470, 470, 486, 452, 454, 457, 549, 457, 457, 684, + + 457, 457, 452, 486, 832, 454, 549, 396, 414, 414, + 447, 414, 414, 414, 414, 414, 414, 414, 414, 414, + 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, + 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, + 414, 414, 414, 414, 414, 414, 414, 414, 414, 414, + 414, 414, 414, 414, 414, 414, 414, 414, 414, 552, + 414, 414, 414, 414, 422, 422, 422, 455, 455, 455, + 422, 898, 455, 897, 489, 489, 489, 552, 582, 455, + 458, 458, 458, 498, 422, 519, 458, 460, 460, 460, + 455, 519, 531, 460, 498, 498, 422, 489, 422, 582, + + 558, 458, 519, 458, 531, 491, 523, 491, 531, 558, + 460, 504, 504, 504, 422, 456, 456, 456, 456, 545, + 456, 456, 456, 505, 505, 505, 456, 456, 456, 456, + 456, 456, 900, 458, 504, 505, 456, 895, 456, 456, + 456, 459, 459, 459, 545, 523, 505, 459, 461, 461, + 461, 462, 462, 462, 461, 491, 556, 462, 518, 471, + 471, 471, 459, 518, 459, 471, 456, 456, 456, 518, + 557, 461, 900, 564, 462, 574, 556, 472, 472, 472, + 518, 574, 471, 472, 567, 495, 495, 495, 495, 557, + 559, 495, 564, 570, 459, 469, 469, 469, 469, 495, + + 472, 469, 469, 567, 495, 497, 497, 497, 497, 469, + 570, 497, 573, 577, 469, 559, 469, 566, 469, 497, + 502, 502, 502, 577, 497, 566, 502, 509, 509, 509, + 568, 573, 502, 509, 510, 510, 510, 522, 522, 522, + 510, 893, 892, 502, 524, 524, 524, 469, 469, 539, + 509, 539, 512, 512, 512, 568, 644, 510, 512, 541, + 522, 541, 529, 529, 529, 538, 538, 538, 529, 572, + 539, 578, 575, 576, 579, 512, 529, 547, 547, 547, + 541, 580, 641, 646, 579, 529, 538, 676, 589, 572, + 656, 547, 575, 641, 524, 578, 576, 547, 656, 644, + + 547, 589, 539, 660, 580, 583, 583, 583, 646, 757, + 812, 837, 541, 660, 837, 757, 812, 676, 538, 550, + 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, + 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, + 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, + 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, + 550, 550, 550, 550, 550, 550, 550, 550, 550, 550, + 550, 550, 550, 550, 550, 553, 553, 891, 831, 890, + 922, 553, 553, 553, 553, 553, 553, 553, 553, 553, + 553, 553, 553, 553, 553, 553, 553, 553, 553, 553, + + 553, 553, 553, 553, 553, 554, 554, 831, 599, 922, + 599, 554, 554, 554, 554, 554, 554, 554, 554, 554, + 554, 554, 554, 554, 554, 554, 554, 554, 554, 554, + 554, 554, 554, 554, 554, 560, 560, 560, 587, 587, + 587, 560, 658, 733, 587, 591, 591, 591, 593, 593, + 593, 591, 647, 593, 594, 594, 594, 591, 599, 594, + 647, 587, 661, 658, 659, 663, 594, 748, 591, 647, + 666, 593, 673, 659, 668, 663, 661, 594, 748, 666, + 733, 673, 661, 889, 668, 560, 571, 571, 571, 571, + 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, + + 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, + 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, + 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, + 571, 571, 571, 571, 571, 571, 571, 571, 571, 571, + 571, 571, 581, 581, 888, 581, 581, 581, 581, 581, + 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, + 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, + 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, + 581, 581, 581, 581, 581, 581, 581, 581, 581, 581, + 581, 581, 581, 581, 581, 581, 581, 581, 595, 595, + + 595, 596, 596, 596, 595, 683, 645, 596, 597, 597, + 597, 598, 598, 598, 597, 887, 886, 598, 655, 595, + 655, 595, 596, 683, 596, 669, 605, 605, 605, 597, + 686, 597, 605, 671, 598, 606, 606, 606, 672, 655, + 685, 606, 607, 607, 607, 687, 669, 674, 607, 605, + 645, 595, 715, 671, 596, 686, 674, 685, 606, 672, + 715, 597, 732, 880, 848, 607, 613, 613, 687, 715, + 848, 655, 613, 613, 613, 613, 613, 613, 613, 613, + 613, 613, 613, 613, 613, 613, 613, 613, 613, 613, + 613, 613, 613, 613, 613, 613, 617, 617, 617, 624, + + 624, 624, 617, 740, 732, 624, 628, 628, 628, 750, + 617, 878, 628, 740, 744, 629, 629, 629, 747, 617, + 628, 629, 624, 875, 636, 636, 636, 629, 747, 628, + 636, 639, 639, 639, 750, 728, 744, 639, 629, 751, + 649, 649, 649, 728, 755, 639, 649, 636, 675, 751, + 675, 649, 728, 649, 639, 657, 657, 657, 682, 682, + 682, 657, 802, 649, 682, 689, 689, 689, 675, 755, + 696, 696, 696, 874, 795, 657, 696, 697, 697, 697, + 749, 682, 802, 697, 696, 689, 756, 657, 689, 697, + 707, 707, 707, 696, 752, 787, 707, 762, 675, 749, + + 697, 718, 718, 718, 752, 657, 678, 718, 753, 758, + 814, 756, 787, 707, 804, 762, 795, 689, 753, 758, + 678, 678, 873, 814, 718, 804, 678, 678, 678, 678, + 678, 678, 678, 678, 678, 678, 678, 678, 678, 678, + 678, 678, 678, 678, 678, 678, 678, 678, 678, 678, + 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, + 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, + 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, + 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, + 688, 688, 688, 688, 688, 688, 688, 688, 688, 688, + + 688, 688, 688, 688, 688, 688, 701, 701, 701, 712, + 712, 712, 701, 872, 722, 722, 722, 725, 725, 725, + 722, 899, 764, 725, 731, 731, 731, 701, 722, 701, + 731, 735, 712, 739, 739, 739, 735, 722, 735, 763, + 725, 765, 796, 793, 739, 764, 739, 731, 735, 741, + 741, 741, 803, 763, 899, 741, 739, 871, 806, 701, + 793, 712, 771, 771, 771, 765, 805, 876, 771, 773, + 773, 773, 776, 776, 776, 773, 803, 805, 776, 806, + 788, 788, 788, 773, 796, 771, 808, 827, 876, 794, + 794, 794, 773, 861, 807, 776, 938, 808, 827, 741, + + 760, 760, 760, 788, 760, 760, 760, 791, 791, 791, + 760, 760, 794, 791, 798, 798, 798, 800, 807, 800, + 798, 813, 800, 800, 842, 798, 823, 798, 823, 839, + 791, 823, 823, 800, 817, 817, 817, 798, 938, 833, + 817, 945, 846, 813, 833, 800, 833, 830, 842, 800, + 760, 847, 760, 767, 839, 864, 833, 817, 830, 865, + 830, 846, 881, 830, 830, 945, 864, 767, 767, 859, + 865, 847, 881, 767, 767, 767, 767, 767, 767, 767, + 767, 767, 767, 767, 767, 767, 767, 767, 767, 767, + 767, 767, 767, 767, 767, 767, 767, 809, 809, 809, + + 868, 809, 809, 809, 822, 822, 822, 809, 809, 854, + 822, 828, 828, 828, 884, 854, 822, 828, 829, 829, + 829, 883, 863, 828, 829, 868, 854, 822, 863, 882, + 829, 835, 835, 835, 828, 884, 870, 858, 882, 863, + 883, 829, 835, 910, 835, 856, 855, 809, 870, 809, + 852, 851, 870, 910, 835, 840, 840, 840, 840, 840, + 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, + 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, + 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, + 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, + + 840, 840, 840, 840, 840, 840, 840, 840, 840, 840, + 840, 841, 841, 841, 841, 841, 841, 841, 841, 841, + 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, + 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, + 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, + 841, 841, 841, 841, 841, 841, 841, 841, 841, 841, + 841, 841, 841, 841, 841, 841, 841, 857, 857, 857, + 862, 866, 866, 866, 896, 862, 902, 902, 902, 909, + 850, 862, 902, 930, 849, 896, 843, 902, 1043, 902, + 857, 1043, 862, 930, 866, 838, 836, 909, 826, 902, + + 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, + 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, + 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, + 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, + 907, 907, 907, 907, 907, 907, 907, 907, 907, 907, + 907, 907, 907, 907, 907, 907, 908, 916, 916, 916, + 921, 921, 921, 916, 923, 924, 921, 935, 937, 940, + 924, 825, 924, 977, 977, 978, 978, 977, 908, 978, + 916, 824, 924, 921, 935, 937, 988, 988, 940, 821, + 988, 820, 819, 923, 931, 931, 931, 931, 931, 931, + + 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, + 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, + 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, + 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, + 931, 931, 931, 931, 931, 931, 931, 931, 931, 931, + 947, 1008, 1008, 1025, 1025, 1008, 818, 1025, 816, 811, + 810, 801, 797, 792, 790, 789, 786, 784, 777, 775, + 774, 772, 770, 769, 754, 746, 743, 738, 737, 736, + 947, 953, 953, 953, 953, 953, 953, 953, 953, 953, + 953, 953, 953, 953, 953, 953, 953, 953, 953, 953, + + 953, 953, 954, 954, 954, 954, 954, 954, 954, 954, + 954, 954, 954, 954, 954, 954, 954, 954, 954, 954, + 954, 954, 954, 955, 955, 955, 955, 955, 955, 955, + 955, 955, 955, 955, 955, 955, 955, 955, 955, 955, + 955, 955, 955, 955, 956, 956, 956, 956, 956, 956, + 956, 956, 956, 956, 956, 956, 956, 956, 956, 956, + 956, 956, 956, 956, 956, 957, 957, 957, 957, 957, + 957, 957, 957, 957, 957, 957, 957, 957, 957, 957, + 957, 957, 957, 957, 957, 957, 958, 958, 958, 958, + 958, 958, 958, 958, 958, 958, 958, 958, 958, 958, + + 958, 958, 958, 958, 958, 958, 958, 959, 959, 959, + 959, 959, 959, 959, 959, 959, 959, 959, 959, 959, + 959, 959, 959, 959, 959, 959, 959, 959, 960, 960, + 960, 960, 960, 960, 960, 960, 960, 960, 960, 960, + 960, 960, 960, 960, 960, 960, 960, 960, 960, 961, + 961, 961, 961, 961, 961, 961, 961, 961, 961, 961, + 961, 961, 961, 961, 961, 961, 961, 961, 961, 961, + 962, 962, 962, 962, 962, 962, 962, 962, 962, 962, + 962, 962, 962, 962, 962, 962, 962, 962, 962, 962, + 962, 963, 963, 963, 963, 963, 963, 963, 963, 963, + + 963, 963, 963, 963, 963, 963, 963, 963, 963, 963, + 963, 963, 964, 730, 729, 726, 964, 964, 964, 964, + 724, 723, 721, 964, 964, 965, 965, 965, 965, 720, + 965, 965, 965, 965, 965, 719, 965, 965, 965, 965, + 717, 716, 714, 965, 965, 966, 966, 713, 966, 966, + 966, 966, 966, 966, 966, 966, 966, 966, 966, 966, + 966, 966, 711, 966, 966, 966, 967, 967, 710, 967, + 967, 967, 967, 967, 967, 967, 967, 967, 967, 967, + 967, 967, 967, 709, 967, 967, 967, 968, 968, 708, + 968, 968, 968, 968, 968, 968, 968, 968, 968, 968, + + 968, 968, 968, 968, 706, 968, 968, 968, 969, 969, + 969, 705, 969, 969, 704, 969, 969, 969, 703, 969, + 969, 702, 969, 700, 699, 969, 969, 969, 970, 970, + 698, 970, 970, 970, 695, 970, 694, 970, 970, 970, + 970, 693, 692, 691, 970, 970, 971, 681, 680, 971, + 971, 971, 670, 971, 667, 971, 971, 971, 971, 662, + 654, 653, 971, 971, 972, 972, 652, 651, 972, 972, + 650, 648, 643, 972, 972, 642, 972, 640, 638, 635, + 972, 972, 973, 633, 632, 631, 973, 973, 630, 627, + 626, 973, 973, 973, 973, 625, 623, 622, 973, 973, + + 974, 974, 974, 621, 620, 974, 974, 974, 974, 974, + 619, 974, 974, 974, 974, 618, 616, 615, 974, 974, + 975, 975, 614, 975, 975, 975, 975, 975, 975, 975, + 975, 975, 975, 975, 975, 975, 975, 975, 975, 975, + 975, 976, 976, 976, 612, 611, 976, 976, 976, 976, + 976, 610, 976, 976, 976, 976, 609, 608, 604, 976, + 976, 979, 979, 603, 602, 601, 600, 592, 590, 586, + 585, 584, 979, 562, 537, 979, 536, 535, 534, 979, + 979, 980, 980, 533, 980, 980, 980, 980, 980, 980, + 980, 980, 980, 980, 980, 980, 980, 980, 980, 980, + + 980, 980, 981, 532, 528, 525, 517, 516, 981, 514, + 513, 981, 508, 506, 503, 981, 981, 982, 501, 496, + 982, 494, 493, 982, 490, 488, 487, 982, 982, 983, + 983, 983, 983, 983, 983, 983, 983, 983, 983, 983, + 983, 983, 983, 983, 983, 983, 983, 983, 983, 983, + 984, 984, 484, 984, 984, 984, 984, 984, 984, 984, + 984, 984, 984, 984, 984, 984, 984, 984, 984, 984, + 984, 985, 985, 985, 985, 985, 985, 985, 985, 985, + 985, 985, 985, 985, 985, 985, 985, 985, 985, 985, + 985, 985, 986, 986, 986, 986, 986, 986, 986, 986, + + 986, 986, 986, 986, 986, 986, 986, 986, 986, 986, + 986, 986, 986, 987, 987, 483, 987, 987, 987, 987, + 987, 987, 987, 987, 987, 987, 987, 987, 987, 987, + 987, 987, 987, 987, 989, 989, 481, 480, 479, 478, + 477, 476, 474, 473, 468, 467, 466, 465, 989, 463, + 451, 450, 449, 989, 990, 448, 430, 990, 421, 411, + 399, 990, 990, 991, 991, 398, 991, 991, 991, 991, + 991, 991, 991, 991, 991, 991, 991, 991, 991, 991, + 991, 991, 991, 991, 992, 992, 395, 992, 992, 992, + 992, 992, 992, 992, 992, 992, 992, 992, 992, 992, + + 992, 992, 992, 992, 992, 993, 993, 394, 993, 993, + 993, 993, 993, 993, 993, 993, 993, 993, 993, 993, + 993, 993, 993, 993, 993, 993, 994, 994, 994, 994, + 994, 994, 994, 994, 994, 994, 994, 994, 994, 994, + 994, 994, 994, 994, 994, 994, 994, 995, 392, 388, + 995, 387, 374, 371, 995, 995, 996, 996, 996, 996, + 996, 996, 996, 996, 996, 996, 996, 996, 368, 996, + 996, 367, 996, 996, 996, 996, 996, 997, 997, 997, + 997, 997, 997, 997, 997, 997, 997, 997, 997, 366, + 997, 997, 355, 997, 997, 997, 997, 997, 998, 998, + + 998, 998, 998, 998, 998, 998, 998, 998, 998, 998, + 354, 998, 998, 353, 998, 998, 998, 998, 998, 999, + 999, 350, 999, 999, 999, 999, 999, 999, 999, 999, + 999, 999, 999, 999, 999, 999, 999, 999, 999, 999, + 1000, 1000, 345, 1000, 1000, 1000, 1000, 1000, 1000, 1000, + 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, 1000, + 1000, 1001, 1001, 342, 1001, 1001, 1001, 1001, 1001, 1001, + 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, 1001, + 1001, 1001, 1002, 1002, 1002, 340, 338, 1002, 1002, 1002, + 1002, 1002, 337, 1002, 1002, 1002, 1002, 336, 335, 332, + + 1002, 1002, 1003, 1003, 331, 325, 1003, 324, 323, 322, + 321, 320, 319, 318, 1003, 307, 1003, 264, 263, 262, + 258, 1003, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, + 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, 1004, + 1004, 1004, 1004, 1005, 1005, 1005, 1005, 1005, 1005, 1005, + 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, 1005, + 1005, 1005, 1005, 1005, 1006, 1006, 238, 1006, 1006, 1006, + 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, 1006, + 1006, 1006, 1006, 1006, 1006, 1007, 1007, 233, 1007, 1007, + 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, 1007, + + 1007, 1007, 1007, 1007, 1007, 1007, 1009, 1009, 232, 1009, + 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1009, + 1009, 1009, 1009, 1009, 1009, 1009, 1009, 1010, 1010, 231, + 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, + 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1010, 1011, 1011, + 225, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, + 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1011, 1012, + 1012, 224, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, + 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, 1012, + 1013, 1013, 221, 1013, 1013, 1013, 1013, 1013, 1013, 1013, + + 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, 1013, + 1013, 1014, 1014, 1014, 1014, 1014, 1014, 1014, 1014, 1014, + 1014, 1014, 1014, 220, 1014, 1014, 219, 1014, 1014, 1014, + 1014, 1014, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, + 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, 1015, + 1015, 1015, 1015, 1016, 1016, 1016, 1016, 1016, 1016, 1016, + 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, + 1016, 1016, 1016, 1016, 1017, 1017, 218, 1017, 1017, 1017, + 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, 1017, + 1017, 1017, 1017, 1017, 1017, 1018, 1018, 1018, 1018, 1018, + + 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, 1018, + 1018, 1018, 1018, 1018, 1018, 1018, 1019, 1019, 217, 1019, + 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1019, + 1019, 1019, 1019, 1019, 1019, 1019, 1019, 1020, 1020, 216, + 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, + 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1020, 1021, 1021, + 215, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, + 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1021, 1022, + 1022, 214, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, + 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, 1022, + + 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, 1023, + 1023, 1023, 209, 1023, 1023, 202, 1023, 1023, 1023, 1023, + 1023, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, + 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, 1024, + 1024, 1024, 1026, 1026, 200, 1026, 1026, 1026, 1026, 1026, + 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, 1026, + 1026, 1026, 1026, 1027, 1027, 1027, 1027, 1027, 1027, 1027, + 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, 1027, + 1027, 1027, 1027, 1027, 1028, 1028, 1028, 1028, 1028, 1028, + 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, 1028, + + 1028, 199, 1028, 1028, 1028, 1029, 1029, 198, 1029, 1029, + 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, 1029, + 1029, 1029, 1029, 1029, 1029, 1029, 1030, 1030, 1030, 1030, + 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1030, + 1030, 1030, 1030, 1030, 1030, 1030, 1030, 1031, 1031, 1031, + 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, + 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1031, 1032, 1032, + 1032, 1032, 1032, 196, 1032, 1032, 1032, 1032, 1032, 1032, + 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1032, 1033, + 1033, 188, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, + + 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, 1033, + 1034, 1034, 185, 1034, 1034, 1034, 1034, 1034, 1034, 1034, + 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, 1034, + 1034, 1035, 1035, 184, 1035, 1035, 1035, 1035, 1035, 1035, + 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, 1035, + 1035, 1035, 1036, 1036, 1036, 1036, 1036, 1036, 1036, 1036, + 1036, 1036, 1036, 1036, 183, 1036, 1036, 182, 1036, 1036, + 1036, 1036, 1036, 1037, 1037, 1037, 1037, 1037, 1037, 1037, + 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, 1037, + 1037, 1037, 1037, 1037, 1038, 1038, 179, 1038, 1038, 1038, + + 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, 1038, + 1038, 1038, 1038, 1038, 1038, 1039, 1039, 166, 1039, 1039, + 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, 1039, + 1039, 1039, 1039, 1039, 1039, 1039, 1040, 1040, 1040, 1040, + 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1040, + 1040, 1040, 1040, 1040, 1040, 1040, 1040, 1041, 1041, 1041, + 1041, 1041, 1041, 1041, 1041, 1041, 1041, 1041, 1041, 161, + 1041, 1041, 160, 1041, 1041, 1041, 1041, 1041, 1042, 1042, + 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, 1042, + 136, 1042, 1042, 135, 1042, 1042, 1042, 1042, 1042, 1044, + + 1044, 126, 1044, 1044, 1044, 1044, 1044, 1044, 1044, 1044, + 1044, 1044, 1044, 1044, 1044, 119, 1044, 1044, 1044, 1044, + 112, 75, 73, 67, 64, 61, 58, 57, 51, 49, + 27, 12, 11, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952, + 952, 952, 952, 952, 952, 952, 952, 952, 952, 952 + } ; + +extern int yy_flex_debug; +int yy_flex_debug = 0; + +static yy_state_type *yy_state_buf=0, *yy_state_ptr=0; +static char *yy_full_match; +static int yy_lp; +static int yy_looking_for_trail_begin = 0; +static int yy_full_lp; +static int *yy_full_state; +#define YY_TRAILING_MASK 0x2000 +#define YY_TRAILING_HEAD_MASK 0x4000 +#define REJECT \ +{ \ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ \ +yy_cp = (yy_full_match); /* restore poss. backed-over text */ \ +(yy_lp) = (yy_full_lp); /* restore orig. accepting pos. */ \ +(yy_state_ptr) = (yy_full_state); /* restore orig. state */ \ +yy_current_state = *(yy_state_ptr); /* restore curr. state */ \ +++(yy_lp); \ +goto find_rule; \ +} + +#define yymore() yymore_used_but_not_detected +#define YY_MORE_ADJ 0 +#define YY_RESTORE_YY_MORE_OFFSET +char *yytext; +#line 1 "lacheck.l" +/* -*- Mode: C -*- + * + * lacheck.lex - A consistency checker checker for LaTeX documents + * + * Copyright (C) 1991, 1992 Kresten Krab Thorup. + * Copyright (C) 1993 --- 1998 Per Abrahamsen. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 1, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please send bugs, suggestions, and queries to auc-tex_mgr@sunsite.auc.dk. + * + * $Revision: 1.26 $ + * Author : Kresten Krab Thorup + * Created On : Sun May 26 18:11:58 1991 + * + * HISTORY + * 07-Mar-1998 Per Abrahamsen + * Added return to yywrap. Patch by Fabrice POPINEAU + * . + * 14-Jan-1998 Per Abrahamsen + * Added GPL blurp. + * 27-Oct-1997 Per Abrahamsen + * Count newline after newenvironment and newcommand. + * 12-Jan-1996 Per Abrahamsen + * \\} used not to end a group in definitions. Reported by Piet + * van Oostrum . + * 03-Jan-1995 Per Abrahamsen + * Fix bug which prevented detection of multiple illegal characters + * in labels. Reported by eeide@jaguar.cs.utah.edu (Eric Eide). + * 30-Jul-1994 Per Abrahamsen + * Define dummy yywrap so we no longer depend on `libl.a'. + * 26-Apr-1994 Per Abrahamsen + * Removed a few warnings, by Richard Lloyd . + * 23-Apr-1994 Per Abrahamsen + * Changed all `%i' to `%d' for VMS portability. Reported by + * Stephen Harker . + * 16-Feb-1994 Per Abrahamsen + * Try file name with `.tex' appended before trying it bare. This + * will make the case where a directory and a TeX file share the + * same name work. + * 19-Jan-1994 Per Abrahamsen + * Comments don't imply whitespace. Pointed out by Jacco van + * Ossenbruggen . + * 14-Jan-1994 Per Abrahamsen + * Don't complain about \ref at the beginning of a paragraph. + * Suggested by Jean-Marc Lasgouttes . + * 11-Jan-1994 Per Abrahamsen + * Added version string to usage message. Suggested by Uwe Bonnes + * . + * 04-Jan-1994 Per Abrahamsen + * Warn about newlines in \verb. Suggested by Mark Burton + * . The LaTeX Book agrees (p. 168). + * 10-Sep-1993 Per Abrahamsen + * Removed complain about missing ~ before \cite. Requested by + * Nelson H. F. Beebe . The LaTeX Book seems + * to agree. + * 03-Sep-1993 Per Abrahamsen + * Check for illegal characters in labels. + * 16-Aug-1993 Per Abrahamsen + * Recognize \endinput. Suggested by Stefan Farestam + * . + * 13-Aug-1993 Per Abrahamsen + * } was eaten after display math. Reported by Eckhard Rüggeberg + * . + * 13-Aug-1993 Per Abrahamsen + * Recognize \verb*. Reported by Eckhard Rüggeberg + * . + * 08-Aug-1993 Per Abrahamsen + * Better catch begin and end without arguments. + * 08-Aug-1993 Per Abrahamsen + * Removed free(NULL) as reported by Darrel R. Hankerson + * . + * 08-Aug-1993 Per Abrahamsen + * Removed declaration of realloc for some C compilers. Reported by + * Darrel R. Hankerson + * 30-Jul-1993 Per Abrahamsen + * Added check for italic correction after normal text. + * 29-Jul-1993 Per Abrahamsen + * Added cast for (char*) malloc as suggested by John Interrante + * . + * 29-Jul-1993 Per Abrahamsen + * Added check for missing and extra italic correction. + * 29-Jul-1993 Per Abrahamsen + * Made line number counting more reliable (but it still needs a rewrite)! + * 28-Jul-1993 Per Abrahamsen + * Added check for italic correction before point or comma. + * 6-Jun-1992 Kresten Krab Thorup + * Last Modified: Sat Jun 6 16:37:44 1992 #48 (Kresten Krab Thorup) + * Added test for whitespace before punctuation mark + * 17-Dec-1991 (Last Mod: Tue Dec 17 21:01:24 1991 #41) Kresten Krab Thorup + * Added 'word word` and missing ~ before cite and ref + * 18-Jun-1991 (Last Mod: Tue Jun 18 19:20:43 1991 #17) Kresten Krab Thorup + * Added check (or rather management) for \newenvironment and + * \newcommand - as suggested by Per Abrahamsen abrham@hugin.dk + * 30-May-1991 (Last Mod: Thu May 30 02:22:33 1991 #15) Kresten Krab Thorup + * Added check for `$${punct}' and `{punct}$' constructions + * 30-May-1991 (Last Mod: Wed May 29 10:31:35 1991 #6) Kresten Krab Thorup + * Improved (dynamic) stack management from Andreas Stolcke ... + * + * 26-May-1991 Kresten Krab Thorup + * Initial distribution version. + */ +#line 119 "lacheck.l" + +#include +#include + +#if defined(WIN32) && !defined(__MINGW32__) +#include +#endif +/* #include */ + +/* extern char *realloc(); */ + +#ifdef NEED_STRSTR +char *strstr(); +#endif + +#define GROUP_STACK_SIZE 10 +#define INPUT_STACK_SIZE 10 + +#define PROGNAME "LaCheck" + + /* macros */ + +#define CG_NAME gstack[gstackp-1].s_name +#define CG_TYPE gstack[gstackp-1].s_type +#define CG_LINE gstack[gstackp-1].s_line +#define CG_ITALIC gstack[gstackp-1].italic +#define CG_FILE gstack[gstackp-1].s_file + +void pop(void); +void push(const char *p_name, int p_type, int p_line); +void linecount(void); +void g_checkend(int n); +void e_checkend(int n, char *name); +void f_checkend(char *name); +void input_file(char *file_nam); +void print_bad_match(char *end_command, int type); +int check_top_level_end(char *end_command, int type); + + /* global variables */ + +int line_count = 1; +int warn_count = 0; +char *file_name; +char verb_char; + + /* the group stack */ + +typedef struct tex_group + { + char *s_name; + int s_type; + int s_line; + int italic; + char *s_file; + } tex_group; + +tex_group *gstack; +int gstack_size = GROUP_STACK_SIZE; +int gstackp = 0; + +typedef struct input_ + { + YY_BUFFER_STATE stream; + char *name; + int linenum; + } input_; + +input_ *istack; +int istack_size = INPUT_STACK_SIZE; +int istackp = 0; + +int def_count = 0; + + + +#line 2171 "lacheck.c" + +#define INITIAL 0 +#define B_ENVIRONMENT 1 +#define E_ENVIRONMENT 2 +#define VERBATIM 3 +#define INCLUDE 4 +#define MATH 5 +#define COMMENT 6 +#define VERB 7 +#define DEF 8 +#define AFTER_DISPLAY 9 +#define ENV_DEF 10 +#define ICOR 11 +#define GETICOR 12 + +#ifndef YY_NO_UNISTD_H +/* Special case for "unistd.h", since it is non-ANSI. We include it way + * down here because we want the user's section 1 to have been scanned first. + * The user has a chance to override it with an option. + */ +#include +#endif + +#ifndef YY_EXTRA_TYPE +#define YY_EXTRA_TYPE void * +#endif + +static int yy_init_globals (void ); + +/* Accessor methods to globals. + These are made visible to non-reentrant scanners for convenience. */ + +int yylex_destroy (void ); + +int yyget_debug (void ); + +void yyset_debug (int debug_flag ); + +YY_EXTRA_TYPE yyget_extra (void ); + +void yyset_extra (YY_EXTRA_TYPE user_defined ); + +FILE *yyget_in (void ); + +void yyset_in (FILE * in_str ); + +FILE *yyget_out (void ); + +void yyset_out (FILE * out_str ); + +yy_size_t yyget_leng (void ); + +char *yyget_text (void ); + +int yyget_lineno (void ); + +void yyset_lineno (int line_number ); + +/* Macros after this point can all be overridden by user definitions in + * section 1. + */ + +#ifndef YY_SKIP_YYWRAP +#ifdef __cplusplus +extern "C" int yywrap (void ); +#else +extern int yywrap (void ); +#endif +#endif + + static void yyunput (int c,char *buf_ptr ); + +#ifndef yytext_ptr +static void yy_flex_strncpy (char *,yyconst char *,int ); +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * ); +#endif + +#ifndef YY_NO_INPUT + +#ifdef __cplusplus +static int yyinput (void ); +#else +static int input (void ); +#endif + +#endif + +/* Amount of stuff to slurp up with each read. */ +#ifndef YY_READ_BUF_SIZE +#define YY_READ_BUF_SIZE 8192 +#endif + +/* Copy whatever the last rule matched to the standard output. */ +#ifndef ECHO +/* This used to be an fputs(), but since the string might contain NUL's, + * we now use fwrite(). + */ +#define ECHO do { if (fwrite( yytext, yyleng, 1, yyout )) {} } while (0) +#endif + +/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL, + * is returned in "result". + */ +#ifndef YY_INPUT +#define YY_INPUT(buf,result,max_size) \ + if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \ + { \ + int c = '*'; \ + size_t n; \ + for ( n = 0; n < max_size && \ + (c = getc( yyin )) != EOF && c != '\n'; ++n ) \ + buf[n] = (char) c; \ + if ( c == '\n' ) \ + buf[n++] = (char) c; \ + if ( c == EOF && ferror( yyin ) ) \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + result = n; \ + } \ + else \ + { \ + errno=0; \ + while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \ + { \ + if( errno != EINTR) \ + { \ + YY_FATAL_ERROR( "input in flex scanner failed" ); \ + break; \ + } \ + errno=0; \ + clearerr(yyin); \ + } \ + }\ +\ + +#endif + +/* No semi-colon after return; correct usage is to write "yyterminate();" - + * we don't want an extra ';' after the "return" because that will cause + * some compilers to complain about unreachable statements. + */ +#ifndef yyterminate +#define yyterminate() return YY_NULL +#endif + +/* Number of entries by which start-condition stack grows. */ +#ifndef YY_START_STACK_INCR +#define YY_START_STACK_INCR 25 +#endif + +/* Report a fatal error. */ +#ifndef YY_FATAL_ERROR +#define YY_FATAL_ERROR(msg) yy_fatal_error( msg ) +#endif + +/* end tables serialization structures and prototypes */ + +/* Default declaration of generated scanner - a define so the user can + * easily add parameters. + */ +#ifndef YY_DECL +#define YY_DECL_IS_OURS 1 + +extern int yylex (void); + +#define YY_DECL int yylex (void) +#endif /* !YY_DECL */ + +/* Code executed at the beginning of each rule, after yytext and yyleng + * have been set up. + */ +#ifndef YY_USER_ACTION +#define YY_USER_ACTION +#endif + +/* Code executed at the end of each rule. */ +#ifndef YY_BREAK +#define YY_BREAK break; +#endif + +#define YY_RULE_SETUP \ + if ( yyleng > 0 ) \ + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = \ + (yytext[yyleng - 1] == '\n'); \ + YY_USER_ACTION + +/** The main scanner function which does all the work. + */ +YY_DECL +{ + register yy_state_type yy_current_state; + register char *yy_cp, *yy_bp; + register int yy_act; + + if ( !(yy_init) ) + { + (yy_init) = 1; + +#ifdef YY_USER_INIT + YY_USER_INIT; +#endif + + /* Create the reject buffer large enough to save one state per allowed character. */ + if ( ! (yy_state_buf) ) + (yy_state_buf) = (yy_state_type *)yyalloc(YY_STATE_BUF_SIZE ); + if ( ! (yy_state_buf) ) + YY_FATAL_ERROR( "out of dynamic memory in yylex()" ); + + if ( ! (yy_start) ) + (yy_start) = 1; /* first start state */ + + if ( ! yyin ) + yyin = stdin; + + if ( ! yyout ) + yyout = stdout; + + if ( ! YY_CURRENT_BUFFER ) { + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_load_buffer_state( ); + } + + { +#line 237 "lacheck.l" + + +#line 2404 "lacheck.c" + + while ( 1 ) /* loops until end-of-file is reached */ + { + yy_cp = (yy_c_buf_p); + + /* Support of yytext. */ + *yy_cp = (yy_hold_char); + + /* yy_bp points to the position in yy_ch_buf of the start of + * the current run. + */ + yy_bp = yy_cp; + + yy_current_state = (yy_start); + yy_current_state += YY_AT_BOL(); + + (yy_state_ptr) = (yy_state_buf); + *(yy_state_ptr)++ = yy_current_state; + +yy_match: + do + { + register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)] ; + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 953 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + *(yy_state_ptr)++ = yy_current_state; + ++yy_cp; + } + while ( yy_current_state != 952 ); + +yy_find_action: + yy_current_state = *--(yy_state_ptr); + (yy_lp) = yy_accept[yy_current_state]; +find_rule: /* we branch to this label when backing up */ + for ( ; ; ) /* until we find what rule we matched */ + { + if ( (yy_lp) && (yy_lp) < yy_accept[yy_current_state + 1] ) + { + yy_act = yy_acclist[(yy_lp)]; + if ( yy_act & YY_TRAILING_HEAD_MASK || + (yy_looking_for_trail_begin) ) + { + if ( yy_act == (yy_looking_for_trail_begin) ) + { + (yy_looking_for_trail_begin) = 0; + yy_act &= ~YY_TRAILING_HEAD_MASK; + break; + } + } + else if ( yy_act & YY_TRAILING_MASK ) + { + (yy_looking_for_trail_begin) = yy_act & ~YY_TRAILING_MASK; + (yy_looking_for_trail_begin) |= YY_TRAILING_HEAD_MASK; + } + else + { + (yy_full_match) = yy_cp; + (yy_full_state) = (yy_state_ptr); + (yy_full_lp) = (yy_lp); + break; + } + ++(yy_lp); + goto find_rule; + } + --yy_cp; + yy_current_state = *--(yy_state_ptr); + (yy_lp) = yy_accept[yy_current_state]; + } + + YY_DO_BEFORE_ACTION; + +do_action: /* This label is used only to access EOF actions. */ + + switch ( yy_act ) + { /* beginning of action switch */ +case 1: +YY_RULE_SETUP +#line 239 "lacheck.l" +{ ; } + YY_BREAK +case 2: +YY_RULE_SETUP +#line 241 "lacheck.l" +{ ; } + YY_BREAK +case 3: +/* rule 3 can match eol */ +YY_RULE_SETUP +#line 243 "lacheck.l" +{ line_count++; } + YY_BREAK +case 4: +/* rule 4 can match eol */ +YY_RULE_SETUP +#line 245 "lacheck.l" +{ line_count++; } + YY_BREAK +case 5: +YY_RULE_SETUP +#line 247 "lacheck.l" +{ ; } + YY_BREAK +case 6: +YY_RULE_SETUP +#line 249 "lacheck.l" +{ ; } + YY_BREAK +case 7: +YY_RULE_SETUP +#line 251 "lacheck.l" +{ ; } + YY_BREAK +case 8: +/* rule 8 can match eol */ +YY_RULE_SETUP +#line 253 "lacheck.l" +{ + if (CG_TYPE != 4 && CG_TYPE != 5) { + if (!(CG_TYPE == 2 && strstr(CG_NAME, "array"))) { + printf( "\"%s\", line %d: possible unwanted space at \"{\"\n", + file_name, line_count); + ++warn_count ; + } + } + push( "{", 0, line_count); + linecount(); + } + YY_BREAK +case 9: +YY_RULE_SETUP +#line 265 "lacheck.l" +{ push( "{", 0, line_count);} + YY_BREAK +case 10: +YY_RULE_SETUP +#line 267 "lacheck.l" +{ + { + int italic = CG_ITALIC; + g_checkend(0); + if (italic && !CG_ITALIC) + BEGIN(GETICOR) ; + else + BEGIN(INITIAL); + }} + YY_BREAK +case 11: +YY_RULE_SETUP +#line 277 "lacheck.l" +{ g_checkend(0); } + YY_BREAK +case 12: +YY_RULE_SETUP +#line 279 "lacheck.l" +{ + { + if (!CG_ITALIC) + { + printf("\"%s\", line %d: you may need a \\/ before \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + BEGIN(INITIAL); + }} + YY_BREAK +case 13: +YY_RULE_SETUP +#line 290 "lacheck.l" +{ + { + if (CG_ITALIC) + { + printf("\"%s\", line %d: \\/ not needed before italic text \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + BEGIN(INITIAL); + }} + YY_BREAK +case 14: +/* rule 14 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 2); +(yy_c_buf_p) = yy_cp -= 2; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 301 "lacheck.l" +{ + { + linecount(); + if (!CG_ITALIC) + { + printf("\"%s\", line %d: \\/ not needed after non-italic text \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + }} + YY_BREAK +case 15: +/* rule 15 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 2); +(yy_c_buf_p) = yy_cp -= 2; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 312 "lacheck.l" +{ + { + linecount(); + if (!CG_ITALIC) + { + printf("\"%s\", line %d: \\/ is not needed after non-italic \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + }} + YY_BREAK +case 16: +YY_RULE_SETUP +#line 323 "lacheck.l" +{ BEGIN(INITIAL); } + YY_BREAK +case 17: +YY_RULE_SETUP +#line 325 "lacheck.l" +{ BEGIN(ICOR); } + YY_BREAK +case 18: +YY_RULE_SETUP +#line 327 "lacheck.l" +{ + { + printf("\"%s\", line %d: double \\/ found \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(ICOR); + }} + YY_BREAK +case 19: +/* rule 19 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 335 "lacheck.l" +{ CG_ITALIC = 1; } + YY_BREAK +case 20: +/* rule 20 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 12); +(yy_c_buf_p) = yy_cp = yy_bp + 12; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 337 "lacheck.l" +{ + { + if(CG_ITALIC) + BEGIN(GETICOR); + else + BEGIN(INITIAL); + CG_ITALIC = 0; + }} + YY_BREAK +case 21: +/* rule 21 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 12); +(yy_c_buf_p) = yy_cp = yy_bp + 12; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 346 "lacheck.l" +{ CG_ITALIC = 0; } + YY_BREAK +case 22: +/* rule 22 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 3); +(yy_c_buf_p) = yy_cp = yy_bp + 3; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 348 "lacheck.l" +{ + { + if(CG_ITALIC) + BEGIN(GETICOR); + else + BEGIN(INITIAL); + CG_ITALIC = !CG_ITALIC; + }} + YY_BREAK +case 23: +/* rule 23 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 3); +(yy_c_buf_p) = yy_cp = yy_bp + 3; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 357 "lacheck.l" +{ CG_ITALIC = !CG_ITALIC; } + YY_BREAK +case 24: +YY_RULE_SETUP +#line 359 "lacheck.l" +{ + { + printf("\"%s\", line %d: do not use \\/ before \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + YY_BREAK +case 25: +/* rule 25 can match eol */ +YY_RULE_SETUP +#line 367 "lacheck.l" +{ ; } + YY_BREAK +case 26: +YY_RULE_SETUP +#line 369 "lacheck.l" +{ ; } + YY_BREAK +case 27: +YY_RULE_SETUP +#line 371 "lacheck.l" +{ + { + unput(yytext[0]); + BEGIN(INITIAL); + }} + YY_BREAK +case 28: +YY_RULE_SETUP +#line 377 "lacheck.l" +BEGIN(DEF); + YY_BREAK +case 29: +YY_RULE_SETUP +#line 379 "lacheck.l" +{ ++def_count; } + YY_BREAK +case 30: +YY_RULE_SETUP +#line 381 "lacheck.l" +{ --def_count; + if(def_count == 0) + BEGIN(INITIAL); } + YY_BREAK +case 31: +YY_RULE_SETUP +#line 385 "lacheck.l" +{ ; } + YY_BREAK +case 32: +YY_RULE_SETUP +#line 387 "lacheck.l" +BEGIN(ENV_DEF); + YY_BREAK +case 33: +YY_RULE_SETUP +#line 389 "lacheck.l" +{ ++def_count; } + YY_BREAK +case 34: +YY_RULE_SETUP +#line 391 "lacheck.l" +{ --def_count; + if(def_count == 0) + BEGIN(DEF); } + YY_BREAK +case 35: +YY_RULE_SETUP +#line 395 "lacheck.l" +{ ; } + YY_BREAK +case 36: +YY_RULE_SETUP +#line 397 "lacheck.l" +{ + if(CG_TYPE == 4 || CG_TYPE == 5) + print_bad_match(yytext,4); + else + { + push( yytext, 4, line_count); + }} + YY_BREAK +case 37: +YY_RULE_SETUP +#line 405 "lacheck.l" +{ g_checkend(4); } + YY_BREAK +case 38: +YY_RULE_SETUP +#line 407 "lacheck.l" +{ + if(CG_TYPE == 4 || CG_TYPE == 5) + print_bad_match(yytext,5); + else + { + push( yytext, 5, line_count); + }} + YY_BREAK +case 39: +YY_RULE_SETUP +#line 416 "lacheck.l" +{ g_checkend(5); BEGIN(AFTER_DISPLAY);} + YY_BREAK +case 40: +YY_RULE_SETUP +#line 418 "lacheck.l" +{ + + printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed before end of displaymath\n", + file_name, line_count, yytext); + ++warn_count ; + + BEGIN(INITIAL); } + YY_BREAK +case 41: +/* rule 41 can match eol */ +YY_RULE_SETUP +#line 426 "lacheck.l" +{ unput(yytext[0]); BEGIN(INITIAL); } + YY_BREAK +case 42: +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +(yy_c_buf_p) = yy_cp = yy_bp + 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 428 "lacheck.l" +{ if (CG_TYPE == 4) + { + printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed after end of math mode\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + YY_BREAK +case 43: +YY_RULE_SETUP +#line 436 "lacheck.l" +{ + + if(CG_TYPE == 5) + print_bad_match(yytext, 4); + else + + if(CG_TYPE == 4) + { + e_checkend(4, yytext); + } + else + { + push( yytext, 4, line_count); + }} + YY_BREAK +case 44: +YY_RULE_SETUP +#line 452 "lacheck.l" +{ + + if(CG_TYPE == 4) + print_bad_match(yytext,5); + else + + if(CG_TYPE == 5) + { + e_checkend(5, yytext); + BEGIN(AFTER_DISPLAY); + } + else + { + push( yytext, 5, line_count); + }} + YY_BREAK +case 45: +/* rule 45 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 11); +(yy_c_buf_p) = yy_cp = yy_bp + 11; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 468 "lacheck.l" +{ + { + push("\\begingroup", 1, line_count); + }} + YY_BREAK +case 46: +/* rule 46 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 9); +(yy_c_buf_p) = yy_cp = yy_bp + 9; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 474 "lacheck.l" +{ + { + g_checkend(1); + }} + YY_BREAK +case 47: +YY_RULE_SETUP +#line 480 "lacheck.l" +{ BEGIN(B_ENVIRONMENT); } + YY_BREAK +case 48: +/* rule 48 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 482 "lacheck.l" +{ + { + + printf("\"%s\", line %d: {argument} missing for \\begin\n", + file_name, line_count) ; + ++warn_count; + }} + YY_BREAK +case 49: +YY_RULE_SETUP +#line 490 "lacheck.l" +{ + { + if (strcmp( yytext, "verbatim" ) == 0 ) + { + input(); + BEGIN(VERBATIM); + } + else + { + push(yytext, 2, line_count); + + if ( strcmp (yytext, "sl" ) == 0 + || strcmp (yytext, "it" ) == 0) + CG_ITALIC = 1; + else if (strcmp (yytext, "normalshape") == 0) + CG_ITALIC = 0; + else if (strcmp (yytext, "em") == 0) + CG_ITALIC = !CG_ITALIC; + + input(); + BEGIN(INITIAL); + } + }} + YY_BREAK +case 50: +YY_RULE_SETUP +#line 514 "lacheck.l" +{ BEGIN(INITIAL); } + YY_BREAK +case 51: +YY_RULE_SETUP +#line 516 "lacheck.l" +{ + printf("\"%s\", line %d: TAB character in verbatim environment\n", + file_name, line_count) ; + ++warn_count; + } + YY_BREAK +case 52: +YY_RULE_SETUP +#line 522 "lacheck.l" +{ ; } + YY_BREAK +case 53: +/* rule 53 can match eol */ +YY_RULE_SETUP +#line 524 "lacheck.l" +{ ++line_count; } + YY_BREAK +case 54: +YY_RULE_SETUP +#line 527 "lacheck.l" +{ + verb_char = yytext[yyleng-1]; + BEGIN(VERB); + } + YY_BREAK +case 55: +/* rule 55 can match eol */ +YY_RULE_SETUP +#line 532 "lacheck.l" +{ + printf("\"%s\", line %d: \\verb should not contain end of line characters\n", + file_name, line_count) ; + ++line_count; +} + YY_BREAK +case 56: +YY_RULE_SETUP +#line 538 "lacheck.l" +{ + if ( *yytext == verb_char ) + BEGIN(INITIAL); +} + YY_BREAK +case 57: +YY_RULE_SETUP +#line 544 "lacheck.l" +{ BEGIN(E_ENVIRONMENT); } + YY_BREAK +case 58: +/* rule 58 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 546 "lacheck.l" +{ + { + printf("\"%s\", line %d: {argument} missing for \\end\n", + file_name, line_count) ; + ++warn_count; + }} + YY_BREAK +case 59: +YY_RULE_SETUP +#line 554 "lacheck.l" +{ + { + e_checkend(2, yytext); + input(); + + BEGIN(INITIAL); + }} + YY_BREAK +case 60: +/* rule 60 can match eol */ +YY_RULE_SETUP +#line 563 "lacheck.l" +{ + { + linecount(); + printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", + file_name, line_count, ++yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + YY_BREAK +case 61: +/* rule 61 can match eol */ +YY_RULE_SETUP +#line 572 "lacheck.l" +{ + { + printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + YY_BREAK +case 62: +/* rule 62 can match eol */ +YY_RULE_SETUP +#line 580 "lacheck.l" +{ + { + linecount(); + printf("\"%s\", line %d: missing `\\@' before `.' in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + YY_BREAK +case 63: +/* rule 63 can match eol */ +YY_RULE_SETUP +#line 589 "lacheck.l" +{ + + printf("\"%s\", line %d: double space at \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + YY_BREAK +case 64: +/* rule 64 can match eol */ +YY_RULE_SETUP +#line 598 "lacheck.l" +{ + printf("\"%s\", line %d: \\ldots should be \\cdots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + } + YY_BREAK +case 65: +/* rule 65 can match eol */ +YY_RULE_SETUP +#line 605 "lacheck.l" +{ + printf("\"%s\", line %d: \\cdots should be \\ldots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + YY_BREAK +case 66: +/* rule 66 can match eol */ +YY_RULE_SETUP +#line 613 "lacheck.l" +{ + printf("\"%s\", line %d: Dots should be \\cdots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + } + YY_BREAK +case 67: +/* rule 67 can match eol */ +YY_RULE_SETUP +#line 620 "lacheck.l" +{ + printf("\"%s\", line %d: Dots should be \\ldots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + YY_BREAK +case 68: +YY_RULE_SETUP +#line 629 "lacheck.l" +{ + printf("\"%s\", line %d: Dots should be ellipsis \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + } + YY_BREAK +case 69: +/* rule 69 can match eol */ +YY_RULE_SETUP +#line 636 "lacheck.l" +{ + linecount(); + printf("\"%s\", line %d: bad character in label \"%s\", see C.10.2\n", + file_name, line_count, yytext); + } + YY_BREAK +case 70: +/* rule 70 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 642 "lacheck.l" +{ + linecount(); + BEGIN(INITIAL); + } + YY_BREAK +case 71: +/* rule 71 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 647 "lacheck.l" +{ + linecount(); + printf("\"%s\", line %d: perhaps you should insert a `~' before \"%s\"\n", + file_name, line_count, ++yytext); + BEGIN(INITIAL); + } + YY_BREAK +case 72: +/* rule 72 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 654 "lacheck.l" +{ + linecount(); + printf("\"%s\", line %d: whitespace before footnote in \"%s\"\n", + file_name, line_count, ++yytext); + BEGIN(INITIAL); + } + YY_BREAK +case 73: +/* rule 73 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_cp - 1); +(yy_c_buf_p) = yy_cp -= 1; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +YY_RULE_SETUP +#line 662 "lacheck.l" +{ + { + printf("\"%s\", line %d: Don't use \"%s\" in LaTeX documents\n", + file_name, line_count, yytext); + ++warn_count ; + }} + YY_BREAK +case 74: +/* rule 74 can match eol */ +YY_RULE_SETUP +#line 669 "lacheck.l" +{ linecount() ;} + YY_BREAK +case 75: +/* rule 75 can match eol */ +YY_RULE_SETUP +#line 670 "lacheck.l" +{ linecount(); } + YY_BREAK +case 76: +/* rule 76 can match eol */ +YY_RULE_SETUP +#line 672 "lacheck.l" +{ + { + linecount(); + printf("\"%s\", line %d: Fontspecifiers don't take arguments. \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + /* (void) input(); */ + BEGIN(INITIAL); + }} + YY_BREAK +case 77: +YY_RULE_SETUP +#line 682 "lacheck.l" +{ + { + printf("\"%s\", line %d: Do not use @ in LaTeX macro names. \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + }} + YY_BREAK +case 78: +/* rule 78 can match eol */ +YY_RULE_SETUP +#line 689 "lacheck.l" +{ + { + linecount(); + printf("\"%s\", line %d: Use ` to begin quotation, not ' \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + YY_BREAK +case 79: +YY_RULE_SETUP +#line 698 "lacheck.l" +{ + { + printf("\"%s\", line %d: Use ' to end quotation, not ` \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + YY_BREAK +case 80: +/* rule 80 can match eol */ +YY_RULE_SETUP +#line 707 "lacheck.l" +{ + { + printf("\"%s\", line %d: Whitespace before punctation mark in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + }} + YY_BREAK +case 81: +YY_RULE_SETUP +#line 716 "lacheck.l" +{ BEGIN(COMMENT); } + YY_BREAK +case 82: +/* rule 82 can match eol */ +YY_RULE_SETUP +#line 718 "lacheck.l" +{ BEGIN(INITIAL); ++line_count; } + YY_BREAK +case 83: +YY_RULE_SETUP +#line 720 "lacheck.l" +{ ; } + YY_BREAK +case 84: +YY_RULE_SETUP +#line 723 "lacheck.l" +{ BEGIN(INCLUDE); } + YY_BREAK +case 85: +YY_RULE_SETUP +#line 725 "lacheck.l" +{ + { + if ( strstr(yytext,".sty") == NULL ) + { + printf("** %s:\n", yytext); + input_file(yytext); + } + else + { + printf("\"%s\", line %d: Style file `%s\' omitted.\n", + file_name, + line_count, + yytext); + input(); + } + BEGIN(INITIAL); + }} + YY_BREAK +case 86: +/* rule 86 can match eol */ +*yy_cp = (yy_hold_char); /* undo effects of setting up yytext */ +YY_LINENO_REWIND_TO(yy_bp + 9); +(yy_c_buf_p) = yy_cp = yy_bp + 9; +YY_DO_BEFORE_ACTION; /* set up yytext again */ +#line 744 "lacheck.l" +YY_RULE_SETUP +case YY_STATE_EOF(INITIAL): +YY_RULE_SETUP +case YY_STATE_EOF(B_ENVIRONMENT): +YY_RULE_SETUP +case YY_STATE_EOF(E_ENVIRONMENT): +YY_RULE_SETUP +case YY_STATE_EOF(VERBATIM): +YY_RULE_SETUP +case YY_STATE_EOF(INCLUDE): +YY_RULE_SETUP +case YY_STATE_EOF(MATH): +YY_RULE_SETUP +case YY_STATE_EOF(COMMENT): +YY_RULE_SETUP +case YY_STATE_EOF(VERB): +YY_RULE_SETUP +case YY_STATE_EOF(DEF): +YY_RULE_SETUP +case YY_STATE_EOF(AFTER_DISPLAY): +YY_RULE_SETUP +case YY_STATE_EOF(ENV_DEF): +YY_RULE_SETUP +case YY_STATE_EOF(ICOR): +YY_RULE_SETUP +case YY_STATE_EOF(GETICOR): +#line 744 "lacheck.l" +{ + if (--istackp < 0) + yyterminate(); + + else + { + fclose(yyin); + f_checkend(file_name); + yy_switch_to_buffer(istack[istackp].stream); + free(file_name); + line_count = istack[istackp].linenum; + file_name = istack[istackp].name; + input(); + BEGIN(INITIAL); + } + + } + YY_BREAK +case 87: +YY_RULE_SETUP +#line 763 "lacheck.l" +{ ; } + YY_BREAK +case 88: +YY_RULE_SETUP +#line 764 "lacheck.l" +ECHO; + YY_BREAK +#line 3395 "lacheck.c" + + case YY_END_OF_BUFFER: + { + /* Amount of text matched not including the EOB char. */ + int yy_amount_of_matched_text = (int) (yy_cp - (yytext_ptr)) - 1; + + /* Undo the effects of YY_DO_BEFORE_ACTION. */ + *yy_cp = (yy_hold_char); + YY_RESTORE_YY_MORE_OFFSET + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW ) + { + /* We're scanning a new file or input source. It's + * possible that this happened because the user + * just pointed yyin at a new source and called + * yylex(). If so, then we have to assure + * consistency between YY_CURRENT_BUFFER and our + * globals. Here is the right place to do so, because + * this is the first action (other than possibly a + * back-up) that will match for the new input source. + */ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL; + } + + /* Note that here we test for yy_c_buf_p "<=" to the position + * of the first EOB in the buffer, since yy_c_buf_p will + * already have been incremented past the NUL character + * (since all states make transitions on EOB to the + * end-of-buffer state). Contrast this with the test + * in input(). + */ + if ( (yy_c_buf_p) <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + { /* This was really a NUL. */ + yy_state_type yy_next_state; + + (yy_c_buf_p) = (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + /* Okay, we're now positioned to make the NUL + * transition. We couldn't have + * yy_get_previous_state() go ahead and do it + * for us because it doesn't know how to deal + * with the possibility of jamming (and we don't + * want to build jamming into it because then it + * will run more slowly). + */ + + yy_next_state = yy_try_NUL_trans( yy_current_state ); + + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + + if ( yy_next_state ) + { + /* Consume the NUL. */ + yy_cp = ++(yy_c_buf_p); + yy_current_state = yy_next_state; + goto yy_match; + } + + else + { + yy_cp = (yy_c_buf_p); + goto yy_find_action; + } + } + + else switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_END_OF_FILE: + { + (yy_did_buffer_switch_on_eof) = 0; + + if ( yywrap( ) ) + { + /* Note: because we've taken care in + * yy_get_next_buffer() to have set up + * yytext, we can now set up + * yy_c_buf_p so that if some total + * hoser (like flex itself) wants to + * call the scanner after we return the + * YY_NULL, it'll still work - another + * YY_NULL will get returned. + */ + (yy_c_buf_p) = (yytext_ptr) + YY_MORE_ADJ; + + yy_act = YY_STATE_EOF(YY_START); + goto do_action; + } + + else + { + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; + } + break; + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = + (yytext_ptr) + yy_amount_of_matched_text; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_match; + + case EOB_ACT_LAST_MATCH: + (yy_c_buf_p) = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)]; + + yy_current_state = yy_get_previous_state( ); + + yy_cp = (yy_c_buf_p); + yy_bp = (yytext_ptr) + YY_MORE_ADJ; + goto yy_find_action; + } + break; + } + + default: + YY_FATAL_ERROR( + "fatal flex scanner internal error--no action found" ); + } /* end of action switch */ + } /* end of scanning one token */ + } /* end of user's declarations */ +} /* end of yylex */ + +/* yy_get_next_buffer - try to read in a new buffer + * + * Returns a code representing an action: + * EOB_ACT_LAST_MATCH - + * EOB_ACT_CONTINUE_SCAN - continue scanning from current position + * EOB_ACT_END_OF_FILE - end of file + */ +static int yy_get_next_buffer (void) +{ + register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf; + register char *source = (yytext_ptr); + register int number_to_move, i; + int ret_val; + + if ( (yy_c_buf_p) > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] ) + YY_FATAL_ERROR( + "fatal flex scanner internal error--end of buffer missed" ); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 ) + { /* Don't try to fill the buffer, so this is an EOF. */ + if ( (yy_c_buf_p) - (yytext_ptr) - YY_MORE_ADJ == 1 ) + { + /* We matched a single character, the EOB, so + * treat this as a final EOF. + */ + return EOB_ACT_END_OF_FILE; + } + + else + { + /* We matched some text prior to the EOB, first + * process it. + */ + return EOB_ACT_LAST_MATCH; + } + } + + /* Try to read more data. */ + + /* First move last chars to start of buffer. */ + number_to_move = (int) ((yy_c_buf_p) - (yytext_ptr)) - 1; + + for ( i = 0; i < number_to_move; ++i ) + *(dest++) = *(source++); + + if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING ) + /* don't do the read, it's not guaranteed to return an EOF, + * just force an EOF + */ + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars) = 0; + + else + { + yy_size_t num_to_read = + YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1; + + while ( num_to_read <= 0 ) + { /* Not enough room in the buffer - grow it. */ + + YY_FATAL_ERROR( +"input buffer overflow, can't enlarge buffer because scanner uses REJECT" ); + + } + + if ( num_to_read > YY_READ_BUF_SIZE ) + num_to_read = YY_READ_BUF_SIZE; + + /* Read in more data. */ + YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]), + (yy_n_chars), num_to_read ); + + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + if ( (yy_n_chars) == 0 ) + { + if ( number_to_move == YY_MORE_ADJ ) + { + ret_val = EOB_ACT_END_OF_FILE; + yyrestart(yyin ); + } + + else + { + ret_val = EOB_ACT_LAST_MATCH; + YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = + YY_BUFFER_EOF_PENDING; + } + } + + else + ret_val = EOB_ACT_CONTINUE_SCAN; + + if ((yy_size_t) ((yy_n_chars) + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) { + /* Extend the array by 50%, plus the number we really need. */ + yy_size_t new_size = (yy_n_chars) + number_to_move + ((yy_n_chars) >> 1); + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ); + if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" ); + } + + (yy_n_chars) += number_to_move; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] = YY_END_OF_BUFFER_CHAR; + YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars) + 1] = YY_END_OF_BUFFER_CHAR; + + (yytext_ptr) = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0]; + + return ret_val; +} + +/* yy_get_previous_state - get the state just before the EOB char was reached */ + + static yy_state_type yy_get_previous_state (void) +{ + register yy_state_type yy_current_state; + register char *yy_cp; + + yy_current_state = (yy_start); + yy_current_state += YY_AT_BOL(); + + (yy_state_ptr) = (yy_state_buf); + *(yy_state_ptr)++ = yy_current_state; + + for ( yy_cp = (yytext_ptr) + YY_MORE_ADJ; yy_cp < (yy_c_buf_p); ++yy_cp ) + { + register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1); + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 953 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + *(yy_state_ptr)++ = yy_current_state; + } + + return yy_current_state; +} + +/* yy_try_NUL_trans - try to make a transition on the NUL character + * + * synopsis + * next_state = yy_try_NUL_trans( current_state ); + */ + static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state ) +{ + register int yy_is_jam; + + register YY_CHAR yy_c = 1; + while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state ) + { + yy_current_state = (int) yy_def[yy_current_state]; + if ( yy_current_state >= 953 ) + yy_c = yy_meta[(unsigned int) yy_c]; + } + yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c]; + yy_is_jam = (yy_current_state == 952); + if ( ! yy_is_jam ) + *(yy_state_ptr)++ = yy_current_state; + + return yy_is_jam ? 0 : yy_current_state; +} + + static void yyunput (int c, register char * yy_bp ) +{ + register char *yy_cp; + + yy_cp = (yy_c_buf_p); + + /* undo effects of setting up yytext */ + *yy_cp = (yy_hold_char); + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + { /* need to shift things up to make room */ + /* +2 for EOB chars. */ + register yy_size_t number_to_move = (yy_n_chars) + 2; + register char *dest = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[ + YY_CURRENT_BUFFER_LVALUE->yy_buf_size + 2]; + register char *source = + &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]; + + while ( source > YY_CURRENT_BUFFER_LVALUE->yy_ch_buf ) + *--dest = *--source; + + yy_cp += (int) (dest - source); + yy_bp += (int) (dest - source); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_buf_size; + + if ( yy_cp < YY_CURRENT_BUFFER_LVALUE->yy_ch_buf + 2 ) + YY_FATAL_ERROR( "flex scanner push-back overflow" ); + } + + *--yy_cp = (char) c; + + (yytext_ptr) = yy_bp; + (yy_hold_char) = *yy_cp; + (yy_c_buf_p) = yy_cp; +} + +#ifndef YY_NO_INPUT +#ifdef __cplusplus + static int yyinput (void) +#else + static int input (void) +#endif + +{ + int c; + + *(yy_c_buf_p) = (yy_hold_char); + + if ( *(yy_c_buf_p) == YY_END_OF_BUFFER_CHAR ) + { + /* yy_c_buf_p now points to the character we want to return. + * If this occurs *before* the EOB characters, then it's a + * valid NUL; if not, then we've hit the end of the buffer. + */ + if ( (yy_c_buf_p) < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[(yy_n_chars)] ) + /* This was really a NUL. */ + *(yy_c_buf_p) = '\0'; + + else + { /* need more input */ + yy_size_t offset = (yy_c_buf_p) - (yytext_ptr); + ++(yy_c_buf_p); + + switch ( yy_get_next_buffer( ) ) + { + case EOB_ACT_LAST_MATCH: + /* This happens because yy_g_n_b() + * sees that we've accumulated a + * token and flags that we need to + * try matching the token before + * proceeding. But for input(), + * there's no matching to consider. + * So convert the EOB_ACT_LAST_MATCH + * to EOB_ACT_END_OF_FILE. + */ + + /* Reset buffer status. */ + yyrestart(yyin ); + + /*FALLTHROUGH*/ + + case EOB_ACT_END_OF_FILE: + { + if ( yywrap( ) ) + return EOF; + + if ( ! (yy_did_buffer_switch_on_eof) ) + YY_NEW_FILE; +#ifdef __cplusplus + return yyinput(); +#else + return input(); +#endif + } + + case EOB_ACT_CONTINUE_SCAN: + (yy_c_buf_p) = (yytext_ptr) + offset; + break; + } + } + } + + c = *(unsigned char *) (yy_c_buf_p); /* cast for 8-bit char's */ + *(yy_c_buf_p) = '\0'; /* preserve yytext */ + (yy_hold_char) = *++(yy_c_buf_p); + + YY_CURRENT_BUFFER_LVALUE->yy_at_bol = (c == '\n'); + + return c; +} +#endif /* ifndef YY_NO_INPUT */ + +/** Immediately switch to a different input stream. + * @param input_file A readable stream. + * + * @note This function does not reset the start condition to @c INITIAL . + */ + void yyrestart (FILE * input_file ) +{ + + if ( ! YY_CURRENT_BUFFER ){ + yyensure_buffer_stack (); + YY_CURRENT_BUFFER_LVALUE = + yy_create_buffer(yyin,YY_BUF_SIZE ); + } + + yy_init_buffer(YY_CURRENT_BUFFER,input_file ); + yy_load_buffer_state( ); +} + +/** Switch to a different input buffer. + * @param new_buffer The new input buffer. + * + */ + void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ) +{ + + /* TODO. We should be able to replace this entire function body + * with + * yypop_buffer_state(); + * yypush_buffer_state(new_buffer); + */ + yyensure_buffer_stack (); + if ( YY_CURRENT_BUFFER == new_buffer ) + return; + + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + YY_CURRENT_BUFFER_LVALUE = new_buffer; + yy_load_buffer_state( ); + + /* We don't actually know whether we did this switch during + * EOF (yywrap()) processing, but the only time this flag + * is looked at is after yywrap() is called, so it's safe + * to go ahead and always set it. + */ + (yy_did_buffer_switch_on_eof) = 1; +} + +static void yy_load_buffer_state (void) +{ + (yy_n_chars) = YY_CURRENT_BUFFER_LVALUE->yy_n_chars; + (yytext_ptr) = (yy_c_buf_p) = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos; + yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file; + (yy_hold_char) = *(yy_c_buf_p); +} + +/** Allocate and initialize an input buffer state. + * @param file A readable stream. + * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE. + * + * @return the allocated buffer state. + */ + YY_BUFFER_STATE yy_create_buffer (FILE * file, int size ) +{ + YY_BUFFER_STATE b; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_buf_size = size; + + /* yy_ch_buf has to be 2 characters longer than the size given because + * we need to put in 2 end-of-buffer characters. + */ + b->yy_ch_buf = (char *) yyalloc(b->yy_buf_size + 2 ); + if ( ! b->yy_ch_buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_create_buffer()" ); + + b->yy_is_our_buffer = 1; + + yy_init_buffer(b,file ); + + return b; +} + +/** Destroy the buffer. + * @param b a buffer created with yy_create_buffer() + * + */ + void yy_delete_buffer (YY_BUFFER_STATE b ) +{ + + if ( ! b ) + return; + + if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */ + YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0; + + if ( b->yy_is_our_buffer ) + yyfree((void *) b->yy_ch_buf ); + + yyfree((void *) b ); +} + +/* Initializes or reinitializes a buffer. + * This function is sometimes called more than once on the same buffer, + * such as during a yyrestart() or at EOF. + */ + static void yy_init_buffer (YY_BUFFER_STATE b, FILE * file ) + +{ + int oerrno = errno; + + yy_flush_buffer(b ); + + b->yy_input_file = file; + b->yy_fill_buffer = 1; + + /* If b is the current buffer, then yy_init_buffer was _probably_ + * called from yyrestart() or through yy_get_next_buffer. + * In that case, we don't want to reset the lineno or column. + */ + if (b != YY_CURRENT_BUFFER){ + b->yy_bs_lineno = 1; + b->yy_bs_column = 0; + } + + b->yy_is_interactive = 0; + + errno = oerrno; +} + +/** Discard all buffered characters. On the next scan, YY_INPUT will be called. + * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER. + * + */ + void yy_flush_buffer (YY_BUFFER_STATE b ) +{ + if ( ! b ) + return; + + b->yy_n_chars = 0; + + /* We always need two end-of-buffer characters. The first causes + * a transition to the end-of-buffer state. The second causes + * a jam in that state. + */ + b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR; + b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR; + + b->yy_buf_pos = &b->yy_ch_buf[0]; + + b->yy_at_bol = 1; + b->yy_buffer_status = YY_BUFFER_NEW; + + if ( b == YY_CURRENT_BUFFER ) + yy_load_buffer_state( ); +} + +/** Pushes the new state onto the stack. The new state becomes + * the current state. This function will allocate the stack + * if necessary. + * @param new_buffer The new state. + * + */ +void yypush_buffer_state (YY_BUFFER_STATE new_buffer ) +{ + if (new_buffer == NULL) + return; + + yyensure_buffer_stack(); + + /* This block is copied from yy_switch_to_buffer. */ + if ( YY_CURRENT_BUFFER ) + { + /* Flush out information for old buffer. */ + *(yy_c_buf_p) = (yy_hold_char); + YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = (yy_c_buf_p); + YY_CURRENT_BUFFER_LVALUE->yy_n_chars = (yy_n_chars); + } + + /* Only push if top exists. Otherwise, replace top. */ + if (YY_CURRENT_BUFFER) + (yy_buffer_stack_top)++; + YY_CURRENT_BUFFER_LVALUE = new_buffer; + + /* copied from yy_switch_to_buffer. */ + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; +} + +/** Removes and deletes the top of the stack, if present. + * The next element becomes the new top. + * + */ +void yypop_buffer_state (void) +{ + if (!YY_CURRENT_BUFFER) + return; + + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + if ((yy_buffer_stack_top) > 0) + --(yy_buffer_stack_top); + + if (YY_CURRENT_BUFFER) { + yy_load_buffer_state( ); + (yy_did_buffer_switch_on_eof) = 1; + } +} + +/* Allocates the stack if it does not exist. + * Guarantees space for at least one push. + */ +static void yyensure_buffer_stack (void) +{ + yy_size_t num_to_alloc; + + if (!(yy_buffer_stack)) { + + /* First allocation is just for 2 elements, since we don't know if this + * scanner will even need a stack. We use 2 instead of 1 to avoid an + * immediate realloc on the next call. + */ + num_to_alloc = 1; + (yy_buffer_stack) = (struct yy_buffer_state**)yyalloc + (num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + memset((yy_buffer_stack), 0, num_to_alloc * sizeof(struct yy_buffer_state*)); + + (yy_buffer_stack_max) = num_to_alloc; + (yy_buffer_stack_top) = 0; + return; + } + + if ((yy_buffer_stack_top) >= ((yy_buffer_stack_max)) - 1){ + + /* Increase the buffer to prepare for a possible push. */ + int grow_size = 8 /* arbitrary grow size */; + + num_to_alloc = (yy_buffer_stack_max) + grow_size; + (yy_buffer_stack) = (struct yy_buffer_state**)yyrealloc + ((yy_buffer_stack), + num_to_alloc * sizeof(struct yy_buffer_state*) + ); + if ( ! (yy_buffer_stack) ) + YY_FATAL_ERROR( "out of dynamic memory in yyensure_buffer_stack()" ); + + /* zero only the new slots.*/ + memset((yy_buffer_stack) + (yy_buffer_stack_max), 0, grow_size * sizeof(struct yy_buffer_state*)); + (yy_buffer_stack_max) = num_to_alloc; + } +} + +/** Setup the input buffer state to scan directly from a user-specified character buffer. + * @param base the character buffer + * @param size the size in bytes of the character buffer + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_buffer (char * base, yy_size_t size ) +{ + YY_BUFFER_STATE b; + + if ( size < 2 || + base[size-2] != YY_END_OF_BUFFER_CHAR || + base[size-1] != YY_END_OF_BUFFER_CHAR ) + /* They forgot to leave room for the EOB's. */ + return 0; + + b = (YY_BUFFER_STATE) yyalloc(sizeof( struct yy_buffer_state ) ); + if ( ! b ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_buffer()" ); + + b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */ + b->yy_buf_pos = b->yy_ch_buf = base; + b->yy_is_our_buffer = 0; + b->yy_input_file = 0; + b->yy_n_chars = b->yy_buf_size; + b->yy_is_interactive = 0; + b->yy_at_bol = 1; + b->yy_fill_buffer = 0; + b->yy_buffer_status = YY_BUFFER_NEW; + + yy_switch_to_buffer(b ); + + return b; +} + +/** Setup the input buffer state to scan a string. The next call to yylex() will + * scan from a @e copy of @a str. + * @param yystr a NUL-terminated string to scan + * + * @return the newly allocated buffer state object. + * @note If you want to scan bytes that may contain NUL values, then use + * yy_scan_bytes() instead. + */ +YY_BUFFER_STATE yy_scan_string (yyconst char * yystr ) +{ + + return yy_scan_bytes(yystr,strlen(yystr) ); +} + +/** Setup the input buffer state to scan the given bytes. The next call to yylex() will + * scan from a @e copy of @a bytes. + * @param yybytes the byte buffer to scan + * @param _yybytes_len the number of bytes in the buffer pointed to by @a bytes. + * + * @return the newly allocated buffer state object. + */ +YY_BUFFER_STATE yy_scan_bytes (yyconst char * yybytes, yy_size_t _yybytes_len ) +{ + YY_BUFFER_STATE b; + char *buf; + yy_size_t n; + yy_size_t i; + + /* Get memory for full buffer, including space for trailing EOB's. */ + n = _yybytes_len + 2; + buf = (char *) yyalloc(n ); + if ( ! buf ) + YY_FATAL_ERROR( "out of dynamic memory in yy_scan_bytes()" ); + + for ( i = 0; i < _yybytes_len; ++i ) + buf[i] = yybytes[i]; + + buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR; + + b = yy_scan_buffer(buf,n ); + if ( ! b ) + YY_FATAL_ERROR( "bad buffer in yy_scan_bytes()" ); + + /* It's okay to grow etc. this buffer, and we should throw it + * away when we're done. + */ + b->yy_is_our_buffer = 1; + + return b; +} + +#ifndef YY_EXIT_FAILURE +#define YY_EXIT_FAILURE 2 +#endif + +static void yy_fatal_error (yyconst char* msg ) +{ + (void) fprintf( stderr, "%s\n", msg ); + exit( YY_EXIT_FAILURE ); +} + +/* Redefine yyless() so it works in section 3 code. */ + +#undef yyless +#define yyless(n) \ + do \ + { \ + /* Undo effects of setting up yytext. */ \ + int yyless_macro_arg = (n); \ + YY_LESS_LINENO(yyless_macro_arg);\ + yytext[yyleng] = (yy_hold_char); \ + (yy_c_buf_p) = yytext + yyless_macro_arg; \ + (yy_hold_char) = *(yy_c_buf_p); \ + *(yy_c_buf_p) = '\0'; \ + yyleng = yyless_macro_arg; \ + } \ + while ( 0 ) + +/* Accessor methods (get/set functions) to struct members. */ + +/** Get the current line number. + * + */ +int yyget_lineno (void) +{ + + return yylineno; +} + +/** Get the input stream. + * + */ +FILE *yyget_in (void) +{ + return yyin; +} + +/** Get the output stream. + * + */ +FILE *yyget_out (void) +{ + return yyout; +} + +/** Get the length of the current token. + * + */ +yy_size_t yyget_leng (void) +{ + return yyleng; +} + +/** Get the current token. + * + */ + +char *yyget_text (void) +{ + return yytext; +} + +/** Set the current line number. + * @param line_number + * + */ +void yyset_lineno (int line_number ) +{ + + yylineno = line_number; +} + +/** Set the input stream. This does not discard the current + * input buffer. + * @param in_str A readable stream. + * + * @see yy_switch_to_buffer + */ +void yyset_in (FILE * in_str ) +{ + yyin = in_str ; +} + +void yyset_out (FILE * out_str ) +{ + yyout = out_str ; +} + +int yyget_debug (void) +{ + return yy_flex_debug; +} + +void yyset_debug (int bdebug ) +{ + yy_flex_debug = bdebug ; +} + +static int yy_init_globals (void) +{ + /* Initialization is the same as for the non-reentrant scanner. + * This function is called from yylex_destroy(), so don't allocate here. + */ + + (yy_buffer_stack) = 0; + (yy_buffer_stack_top) = 0; + (yy_buffer_stack_max) = 0; + (yy_c_buf_p) = (char *) 0; + (yy_init) = 0; + (yy_start) = 0; + + (yy_state_buf) = 0; + (yy_state_ptr) = 0; + (yy_full_match) = 0; + (yy_lp) = 0; + +/* Defined in main.c */ +#ifdef YY_STDINIT + yyin = stdin; + yyout = stdout; +#else + yyin = (FILE *) 0; + yyout = (FILE *) 0; +#endif + + /* For future reference: Set errno on error, since we are called by + * yylex_init() + */ + return 0; +} + +/* yylex_destroy is for both reentrant and non-reentrant scanners. */ +int yylex_destroy (void) +{ + + /* Pop the buffer stack, destroying each element. */ + while(YY_CURRENT_BUFFER){ + yy_delete_buffer(YY_CURRENT_BUFFER ); + YY_CURRENT_BUFFER_LVALUE = NULL; + yypop_buffer_state(); + } + + /* Destroy the stack itself. */ + yyfree((yy_buffer_stack) ); + (yy_buffer_stack) = NULL; + + yyfree ( (yy_state_buf) ); + (yy_state_buf) = NULL; + + /* Reset the globals. This is important in a non-reentrant scanner so the next time + * yylex() is called, initialization will occur. */ + yy_init_globals( ); + + return 0; +} + +/* + * Internal utility routines. + */ + +#ifndef yytext_ptr +static void yy_flex_strncpy (char* s1, yyconst char * s2, int n ) +{ + register int i; + for ( i = 0; i < n; ++i ) + s1[i] = s2[i]; +} +#endif + +#ifdef YY_NEED_STRLEN +static int yy_flex_strlen (yyconst char * s ) +{ + register int n; + for ( n = 0; s[n]; ++n ) + ; + + return n; +} +#endif + +void *yyalloc (yy_size_t size ) +{ + return (void *) malloc( size ); +} + +void *yyrealloc (void * ptr, yy_size_t size ) +{ + /* The cast to (char *) in the following accommodates both + * implementations that use char* generic pointers, and those + * that use void* generic pointers. It works with the latter + * because both ANSI C and C++ allow castless assignment from + * any pointer type to void*, and deal with argument conversions + * as though doing an assignment. + */ + return (void *) realloc( (char *) ptr, size ); +} + +void yyfree (void * ptr ) +{ + free( (char *) ptr ); /* see yyrealloc() for (char *) cast */ +} + +#define YYTABLES_NAME "yytables" + +#line 764 "lacheck.l" + + +int main(int argc, char *argv[]) +{ + /* allocate initial stacks */ + gstack = (tex_group *)malloc(gstack_size * sizeof(tex_group)); + istack = (input_ *)malloc(istack_size * sizeof(input_)); + if ( gstack == NULL || istack == NULL ) { + fprintf(stderr, "%s: not enough memory for stacks\n", PROGNAME); + exit(3); + } + + if(argc > 1) + { + if ( (file_name = (char*) malloc(strlen(argv[1]) + 5)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + + strcpy(file_name, argv[1]); + strcat(file_name, ".tex" ); + + if ((yyin = fopen( file_name, "r")) != NULL ) + { + push(file_name, 3, 1); + yylex(); + f_checkend(file_name); + } + else { + file_name[strlen(file_name) - 4] = '\0'; + if ((yyin = fopen( file_name, "r")) != NULL ) + { + push(file_name, 3, 1); + yylex(); + f_checkend(file_name); + } + else + fprintf(stderr, + "%s: Could not open : %s\n",PROGNAME, argv[1]); + } + } + else + { + printf("\n* %s *\n\n",PROGNAME); + printf("\t...a consistency checker for LaTeX documents.\n"); + printf("$Id: lacheck.lex,v 1.26 1998/03/07 07:46:45 abraham Exp $\n\n"); + + printf("Usage:\n\tlacheck filename[.tex] \n\n\n"); + + printf("\tFrom within Emacs:\n\n"); + printf("\tM-x compile RET lacheck filename[.tex] RET\n\n"); + printf("\tUse C-x ` to step through the messages.\n\n"); + printf("\n\tThe found context is displayed in \"double quotes\"\n\n"); + printf("Remark:\n\tAll messages are only warnings!\n\n"); + printf("\tYour document may be right even though LaCheck says "); + printf("something else.\n\n"); + } + return(0); +} + +int yywrap(void) { return 1; } + +#ifdef NEED_STRSTR +char * +strstr(string, substring) + register char *string; /* String to search. */ + char *substring; /* Substring to try to find in string. */ +{ + register char *a, *b; + + /* First scan quickly through the two strings looking for a + * single-character match. When it's found, then compare the + * rest of the substring. + */ + + b = substring; + if (*b == 0) { + return string; + } + for ( ; *string != 0; string += 1) { + if (*string != *b) { + continue; + } + a = string; + while (1) { + if (*b == 0) { + return string; + } + if (*a++ != *b++) { + break; + } + } + b = substring; + } + return (char *) 0; +} +#endif /* NEED_STRSTR */ + +void push(const char *p_name, int p_type, int p_line) +{ + if ( gstackp == gstack_size ) { /* extend stack */ + gstack_size *= 2; + gstack = (tex_group *)realloc(gstack, gstack_size * sizeof(tex_group)); + if ( gstack == NULL ) { + fprintf(stderr, "%s: stack out of memory", PROGNAME); + exit(3); + } + } + + if ( (gstack[gstackp].s_name = + (char *)malloc(strlen(p_name) + 1)) == NULL || + (gstack[gstackp].s_file = + (char *)malloc(strlen(file_name) + 1)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + + strcpy(gstack[gstackp].s_name, p_name); + gstack[gstackp].s_type = p_type; + gstack[gstackp].s_line = p_line; + gstack[gstackp].italic = ( (p_type == 4 || p_type == 5) + ? 1 + : ( gstackp + ? gstack[gstackp - 1].italic + : 0)); + strcpy(gstack[gstackp].s_file,file_name); + ++gstackp; + +} + +void input_file(char *file_nam) +{ + char *tmp_file_name; + FILE *tmp_yyin; + + if ( (tmp_file_name = (char*) malloc(strlen(file_nam) + 5)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + strcpy(tmp_file_name,file_nam); + + if (istackp == istack_size) { /* extend stack */ + istack_size *= 2; + istack = (input_ *)realloc(istack, istack_size * sizeof(input_)); + if ( istack == NULL ) { + fprintf(stderr, "%s: \\input stack out of memory\n", PROGNAME); + exit(3); + } + } + + istack[istackp].stream = YY_CURRENT_BUFFER; + istack[istackp].linenum = line_count; + istack[istackp].name = file_name; + ++istackp; + + (void) strcat(tmp_file_name, ".tex"); + if ((tmp_yyin = fopen( tmp_file_name, "r")) != NULL ) + { + yyin = tmp_yyin; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); + file_name = tmp_file_name; + push(file_name, 3, 1); + line_count = 1; + } + else { + tmp_file_name[strlen(tmp_file_name) - 4] = '\0'; + if ((tmp_yyin = fopen( tmp_file_name , "r")) != NULL ) + { + yyin = tmp_yyin; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); + file_name = tmp_file_name; + push(file_name, 3, 1); + line_count = 1; + } + else + { + --istackp; + free(tmp_file_name); + printf("\"%s\", line %d: Could not open \"%s\"\n", + file_name, + line_count, + file_nam); + input(); + } + } +} + +void pop(void) +{ + if ( gstackp == 0 ) + { + fprintf(stderr, "%s: Stack underflow\n", PROGNAME); + exit(4); + } + --gstackp; + + free(gstack[gstackp].s_name); + free(gstack[gstackp].s_file); +} + +static void print_bg_command(char *name) +{ + + switch (CG_TYPE) { + + case 2: + printf("\\begin{%s}", name); + break; + + case 3: + printf("beginning of file %s", name); + break; + + case 4: + printf("math begin %s", name); + break; + + case 5: + printf("display math begin %s", name); + break; + + default: + printf("%s", name); + + } +} + +static void print_eg_command(char *name, int type) +{ + + switch (type) { + + case 2: + printf("\\end{%s}", name); + break; + + case 3: + printf("end of file %s", name); + break; + + case 4: + printf("math end %s", name); + break; + + case 5: + printf("display math end %s", name); + break; + + default: + printf("%s", name); + break; + } +} + + +void g_checkend(int n) +{ + if ( check_top_level_end(yytext,n) == 1 ) + { + if ( CG_TYPE != n ) + print_bad_match(yytext,n); + else + pop(); + } +} + +void e_checkend(int n, char *name) +{ + if ( check_top_level_end(name,n) == 1 ) + { + if ( CG_TYPE != n || strcmp( CG_NAME, name ) != 0 ) + print_bad_match(name,n); + + pop(); + + } +} + +void f_checkend(char *name) +{ + if ( check_top_level_end(name,3) == 1 ) + { + if ( CG_TYPE != 3 || strcmp( CG_NAME, name ) != 0 ) + + while( CG_TYPE != 3 ) + { + print_bad_match(name,3); + pop(); + } + + pop(); + } +} + +void print_bad_match(char *end_command, int type) +{ + printf("\"%s\", line %d: <- unmatched \"", + file_name, + line_count); + print_eg_command(end_command, type); + printf("\"\n"); + + printf("\"%s\", line %d: -> unmatched \"", + CG_FILE, + CG_LINE); + print_bg_command(CG_NAME); + printf("\"\n"); + warn_count += 2; +} + +int check_top_level_end(char *end_command, int type) +{ + if ( gstackp == 0 ) + { + printf("\"%s\", line %d: \"", + file_name, + line_count); + print_eg_command(end_command, type); + printf("\" found at top level\n"); + ++warn_count; + return(0); + } + else + return(1); +} + +void linecount(void) +{ + int i; + for (i = 0; i < yyleng; i++) + if(yytext[i] == '\n') + line_count++; +} + + diff --git a/Build/source/utils/lacheck/lacheck.hlp b/Build/source/utils/lacheck/lacheck.hlp new file mode 100644 index 00000000000..b99a0e91a47 --- /dev/null +++ b/Build/source/utils/lacheck/lacheck.hlp @@ -0,0 +1,118 @@ +1 LaCheck + +A consistency checker for LaTeX documents. + + LaCheck filename[.tex] + +2 DESCRIPTION + +LaCheck is a general purpose consistency checker for LaTeX documents. +It reads a LaTeX document and displays warning messages, if it finds +bad sequences. It should be noted, that the badness is very +subjective. LaCheck is designed to help find common mistakes in LaTeX +documents, especially those made by beginners. + +The things checked are: Mismatched groups (braces), environments and +math mode delimiters. When a mismatch is found, line numbers for +"both" start and end of the mismatch is given. The error messages +comes in pairs, one for the end match and one for the beginning, +marked with `<-' and `->' respectively. + +Bad spacing including missing a `\' after an abbreviation, missing an +`\@' before a punctuation mark in a paragraph that is ended by an +capital letter, double spaces like ` ~', bad usage of ellipsis (like +using ... instead of \ldots, or using \ldots where \cdots should be +used), missing \~ before a \cite or \ref commands, space before +footnotes, italic corrections before comma, point, or italic text, +italic correction after normal text, missing italic correction when +switching from italic to normal text, and double italic correction. + +Badly placed punctuation marks around end of math mode delimiters. +This is, pucktuation placed right after display math end or +punctuation placed right before text math end. Sequences of +whitespace followed by punctuation marks are also caught. Bad use of +quotation characters, i.e. constructs like "\'word" or "word\`" are +warned about, tabs in verbatim environments are caught, certain TeX +primitives are frowned upon, attempts to give font specifiers +arguments such as \em{text} are noted, and use of @ in LaTeX macros +are reported. + +LaCheck will read files that are input using \input or \include. Files +with suffix `.sty' are omitted, as they probably will cause LaCheck to +crash. + +2 USAGE + + LaCheck filename[.tex] + +LaCheck may be invoked from within Emacs using compile: + +To run: +"M-x compile RET lacheck RET" +, and then +"C-x `" +to parse the messages + +2 OUTPUT + +The output is UNIX-error like, and may be parsed using Emacs compile +mode. Here is a sample: + +0 +lacheck compiler + +"/usr/mef/compiler.tex", line 34: missing `\' after "etc." + +"/usr/mef/compiler.tex", line 179: double space at " ~" + +"/usr/mef/compiler.tex", line 186: <- unmatched "}" + +"/usr/mef/compiler.tex", line 181: -> unmatched "$$" +1 + +A control space `\\ ' should be inserted at line 34, to prevent an +end-of-sentence space. +Also, at line 179, the first space of the sequence " ~" should +probably be deleted. +The last two lines is an example, where the user mistyped, and +probably inserted an extra "}" somewhere. + +2 DIAGNOSTICS + +Some special cases should be explained. In cases where a sentence ends +with something that LaCheck thinks is an abbreviation an missing `\\' +error may also occur, if the following sentence begins with a +lowercase letter. + +A mismatch error may cause more to follow, due to the chosen +algorithm. In such cases just correct the "first" error and run +LaCheck again + +Braces, environments and math mode must be balanced within a file. + +LaCheck may be confused by unmatched stuff placed inside verbatim-like +environments called something else than exactly `verbatim'. + +2 FILES + +Source: TEX_DISK:[TEX.TEX__SOURCE.LACHECK] + +Executable: TEX_EXE:LACHECK.EXE + +SEE ALSO +TeX, emacs, LaTeX + +2 BUGS + +LaCheck gets confused by advanced macros, is fooled by simple macros, +can't figure out if you use a non-standard way to switch italic on or +off, does not like TeX at all, does not provide any options to turn +off specific warnings, and is at best a crude approximation. + +Ideas for improvements and bug reports are very welcome. Such should +be directed to the maintainers, their email address is +. + +2 AUTHOR +Kresten Krab Thorup with modifications by Per Abrahamsen. + diff --git a/Build/source/utils/lacheck/lacheck.l b/Build/source/utils/lacheck/lacheck.l new file mode 100644 index 00000000000..a345dbfbd72 --- /dev/null +++ b/Build/source/utils/lacheck/lacheck.l @@ -0,0 +1,1096 @@ +/* -*- Mode: C -*- + * + * lacheck.lex - A consistency checker checker for LaTeX documents + * + * Copyright (C) 1991, 1992 Kresten Krab Thorup. + * Copyright (C) 1993 --- 1998 Per Abrahamsen. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 1, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Please send bugs, suggestions, and queries to auc-tex_mgr@sunsite.auc.dk. + * + * $Revision: 1.26 $ + * Author : Kresten Krab Thorup + * Created On : Sun May 26 18:11:58 1991 + * + * HISTORY + * 07-Mar-1998 Per Abrahamsen + * Added return to yywrap. Patch by Fabrice POPINEAU + * . + * 14-Jan-1998 Per Abrahamsen + * Added GPL blurp. + * 27-Oct-1997 Per Abrahamsen + * Count newline after newenvironment and newcommand. + * 12-Jan-1996 Per Abrahamsen + * \\} used not to end a group in definitions. Reported by Piet + * van Oostrum . + * 03-Jan-1995 Per Abrahamsen + * Fix bug which prevented detection of multiple illegal characters + * in labels. Reported by eeide@jaguar.cs.utah.edu (Eric Eide). + * 30-Jul-1994 Per Abrahamsen + * Define dummy yywrap so we no longer depend on `libl.a'. + * 26-Apr-1994 Per Abrahamsen + * Removed a few warnings, by Richard Lloyd . + * 23-Apr-1994 Per Abrahamsen + * Changed all `%i' to `%d' for VMS portability. Reported by + * Stephen Harker . + * 16-Feb-1994 Per Abrahamsen + * Try file name with `.tex' appended before trying it bare. This + * will make the case where a directory and a TeX file share the + * same name work. + * 19-Jan-1994 Per Abrahamsen + * Comments don't imply whitespace. Pointed out by Jacco van + * Ossenbruggen . + * 14-Jan-1994 Per Abrahamsen + * Don't complain about \ref at the beginning of a paragraph. + * Suggested by Jean-Marc Lasgouttes . + * 11-Jan-1994 Per Abrahamsen + * Added version string to usage message. Suggested by Uwe Bonnes + * . + * 04-Jan-1994 Per Abrahamsen + * Warn about newlines in \verb. Suggested by Mark Burton + * . The LaTeX Book agrees (p. 168). + * 10-Sep-1993 Per Abrahamsen + * Removed complain about missing ~ before \cite. Requested by + * Nelson H. F. Beebe . The LaTeX Book seems + * to agree. + * 03-Sep-1993 Per Abrahamsen + * Check for illegal characters in labels. + * 16-Aug-1993 Per Abrahamsen + * Recognize \endinput. Suggested by Stefan Farestam + * . + * 13-Aug-1993 Per Abrahamsen + * } was eaten after display math. Reported by Eckhard Rüggeberg + * . + * 13-Aug-1993 Per Abrahamsen + * Recognize \verb*. Reported by Eckhard Rüggeberg + * . + * 08-Aug-1993 Per Abrahamsen + * Better catch begin and end without arguments. + * 08-Aug-1993 Per Abrahamsen + * Removed free(NULL) as reported by Darrel R. Hankerson + * . + * 08-Aug-1993 Per Abrahamsen + * Removed declaration of realloc for some C compilers. Reported by + * Darrel R. Hankerson + * 30-Jul-1993 Per Abrahamsen + * Added check for italic correction after normal text. + * 29-Jul-1993 Per Abrahamsen + * Added cast for (char*) malloc as suggested by John Interrante + * . + * 29-Jul-1993 Per Abrahamsen + * Added check for missing and extra italic correction. + * 29-Jul-1993 Per Abrahamsen + * Made line number counting more reliable (but it still needs a rewrite)! + * 28-Jul-1993 Per Abrahamsen + * Added check for italic correction before point or comma. + * 6-Jun-1992 Kresten Krab Thorup + * Last Modified: Sat Jun 6 16:37:44 1992 #48 (Kresten Krab Thorup) + * Added test for whitespace before punctuation mark + * 17-Dec-1991 (Last Mod: Tue Dec 17 21:01:24 1991 #41) Kresten Krab Thorup + * Added 'word word` and missing ~ before cite and ref + * 18-Jun-1991 (Last Mod: Tue Jun 18 19:20:43 1991 #17) Kresten Krab Thorup + * Added check (or rather management) for \newenvironment and + * \newcommand - as suggested by Per Abrahamsen abrham@hugin.dk + * 30-May-1991 (Last Mod: Thu May 30 02:22:33 1991 #15) Kresten Krab Thorup + * Added check for `$${punct}' and `{punct}$' constructions + * 30-May-1991 (Last Mod: Wed May 29 10:31:35 1991 #6) Kresten Krab Thorup + * Improved (dynamic) stack management from Andreas Stolcke ... + * + * 26-May-1991 Kresten Krab Thorup + * Initial distribution version. + */ + +%option never-interactive + +%{ + +#include +#include + +#if defined(WIN32) && !defined(__MINGW32__) +#include +#endif +/* #include */ + +/* extern char *realloc(); */ + +#ifdef NEED_STRSTR +char *strstr(); +#endif + +#define GROUP_STACK_SIZE 10 +#define INPUT_STACK_SIZE 10 + +#define PROGNAME "LaCheck" + + /* macros */ + +#define CG_NAME gstack[gstackp-1].s_name +#define CG_TYPE gstack[gstackp-1].s_type +#define CG_LINE gstack[gstackp-1].s_line +#define CG_ITALIC gstack[gstackp-1].italic +#define CG_FILE gstack[gstackp-1].s_file + +void pop(void); +void push(const char *p_name, int p_type, int p_line); +void linecount(void); +void g_checkend(int n); +void e_checkend(int n, char *name); +void f_checkend(char *name); +void input_file(char *file_nam); +void print_bad_match(char *end_command, int type); +int check_top_level_end(char *end_command, int type); + + /* global variables */ + +int line_count = 1; +int warn_count = 0; +char *file_name; +char verb_char; + + /* the group stack */ + +typedef struct tex_group + { + char *s_name; + int s_type; + int s_line; + int italic; + char *s_file; + } tex_group; + +tex_group *gstack; +int gstack_size = GROUP_STACK_SIZE; +int gstackp = 0; + +typedef struct input_ + { + YY_BUFFER_STATE stream; + char *name; + int linenum; + } input_; + +input_ *istack; +int istack_size = INPUT_STACK_SIZE; +int istackp = 0; + +int def_count = 0; + +%} + +%x B_ENVIRONMENT E_ENVIRONMENT VERBATIM INCLUDE MATH COMMENT VERB DEF +%x AFTER_DISPLAY ENV_DEF ICOR GETICOR + +b_group ("{"|\\bgroup) +e_group ("}"|\\egroup) + +b_math \\\( +e_math \\\) +math \$ + +b_display \\\[ +e_display \\\] +display \$\$ + +par ([ \t]*\n[ \t]*\n[ \t\n]*) +non_par_ws ([ \t]+\n?[ \t]*|[ \t]*\n[ \t]*|[ \t]*\n?[ \t]+) + +ws [ \n\t](%[^\n]\n)* +space ({ws}|\~|\\space) +hard_space (\~|\\space) + +u_letter [A-ZÆØÅ] +l_letter [a-zæøå] +punct [\!\.\?] +atoz [a-zA-Z] +letter [A-ZÆØÅa-zæøå] + +c_bin ("-"|"+"|"\\cdot"|"\\oplus"|"\\otimes"|"\\times") +l_bin (",") + +general_abbrev {letter}+{punct} + +non_abbrev {u_letter}{u_letter}+{punct} + +italic_spec (sl|it) +normal_spec normalshape +swap_spec em +font_spec (rm|bf|{italic_spec}|tt|{swap_spec}|mediumseries|{normal_spec}) + +primitive \\(above|advance|catcode|chardef|closein|closeout|copy|count|countdef|cr|crcr|csname|delcode|dimendef|dimen|divide|expandafter|font|hskp|vskip|openout) + +symbol ("$"("\\"{atoz}+|.)"$"|"\\#"|"\\$"|"\\%"|"\\ref") + +%% + +<*>"\\\\" { ; } + +"\\\%" { ; } + +"%"[^\n]*\n { line_count++; } + +\n { line_count++; } + +"\\\{" { ; } + +"\\\}" { ; } + +"\\\$" { ; } + +"{"{ws} { + if (CG_TYPE != 4 && CG_TYPE != 5) { + if (!(CG_TYPE == 2 && strstr(CG_NAME, "array"))) { + printf( "\"%s\", line %d: possible unwanted space at \"{\"\n", + file_name, line_count); + ++warn_count ; + } + } + push( "{", 0, line_count); + linecount(); + } + +{b_group} { push( "{", 0, line_count);} + +{e_group} { + { + int italic = CG_ITALIC; + g_checkend(0); + if (italic && !CG_ITALIC) + BEGIN(GETICOR) ; + else + BEGIN(INITIAL); + }} + +{e_group} { g_checkend(0); } + +[A-Za-zæøåÆØÅ0-9;:!()]+ { + { + if (!CG_ITALIC) + { + printf("\"%s\", line %d: you may need a \\/ before \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + BEGIN(INITIAL); + }} + +[A-Za-zæøåÆØÅ0-9;:!?()`']+ { + { + if (CG_ITALIC) + { + printf("\"%s\", line %d: \\/ not needed before italic text \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + BEGIN(INITIAL); + }} + +^[A-Za-zæøåÆØÅ0-9;:!?()`',.]+{ws}*/\\\/ { + { + linecount(); + if (!CG_ITALIC) + { + printf("\"%s\", line %d: \\/ not needed after non-italic text \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + }} + +{ws}[A-Za-zæøåÆØÅ0-9;:!?()`',.]+{ws}*/\\\/ { + { + linecount(); + if (!CG_ITALIC) + { + printf("\"%s\", line %d: \\/ is not needed after non-italic \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + } + }} + +\\\/ { BEGIN(INITIAL); } + +\\\/ { BEGIN(ICOR); } + +\\\/ { + { + printf("\"%s\", line %d: double \\/ found \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(ICOR); + }} + +\\{italic_spec}/[^a-zA-Z] { CG_ITALIC = 1; } + +\\{normal_spec}/[^a-zA-Z] { + { + if(CG_ITALIC) + BEGIN(GETICOR); + else + BEGIN(INITIAL); + CG_ITALIC = 0; + }} + +\\{normal_spec}/[^a-zA-Z] { CG_ITALIC = 0; } + +\\{swap_spec}/[^a-zA-Z] { + { + if(CG_ITALIC) + BEGIN(GETICOR); + else + BEGIN(INITIAL); + CG_ITALIC = !CG_ITALIC; + }} + +\\{swap_spec}/[^a-zA-Z] { CG_ITALIC = !CG_ITALIC; } + +[,.] { + { + printf("\"%s\", line %d: do not use \\/ before \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + +{ws} { ; } + +~ { ; } + +[^\n] { + { + unput(yytext[0]); + BEGIN(INITIAL); + }} + +"\\"[exg]?(def|newcommand)[^\n\{]+ BEGIN(DEF); + +{b_group} { ++def_count; } + +{e_group} { --def_count; + if(def_count == 0) + BEGIN(INITIAL); } + +. { ; } + +"\\"newenvironment"{"[a-zA-Z]+"}"[^\n\{]+ BEGIN(ENV_DEF); + +{b_group} { ++def_count; } + +{e_group} { --def_count; + if(def_count == 0) + BEGIN(DEF); } + +. { ; } + +{b_math} { + if(CG_TYPE == 4 || CG_TYPE == 5) + print_bad_match(yytext,4); + else + { + push( yytext, 4, line_count); + }} + +{e_math} { g_checkend(4); } + +{b_display} { + if(CG_TYPE == 4 || CG_TYPE == 5) + print_bad_match(yytext,5); + else + { + push( yytext, 5, line_count); + }} + + +{e_display} { g_checkend(5); BEGIN(AFTER_DISPLAY);} + +{punct} { + + printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed before end of displaymath\n", + file_name, line_count, yytext); + ++warn_count ; + + BEGIN(INITIAL); } + +(\n|.) { unput(yytext[0]); BEGIN(INITIAL); } + +{punct}/("\$"|"\\)") { if (CG_TYPE == 4) + { + printf( "\"%s\", line %d: punctuation mark \"%s\" should be placed after end of math mode\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + +{math} { + + if(CG_TYPE == 5) + print_bad_match(yytext, 4); + else + + if(CG_TYPE == 4) + { + e_checkend(4, yytext); + } + else + { + push( yytext, 4, line_count); + }} + + +{display} { + + if(CG_TYPE == 4) + print_bad_match(yytext,5); + else + + if(CG_TYPE == 5) + { + e_checkend(5, yytext); + BEGIN(AFTER_DISPLAY); + } + else + { + push( yytext, 5, line_count); + }} + +\\begingroup/[^a-zA-Z] { + { + push("\\begingroup", 1, line_count); + }} + + +\\endgroup/[^a-zA-Z] { + { + g_checkend(1); + }} + + +\\begin[ \t]*"{" { BEGIN(B_ENVIRONMENT); } + +\\begin[ \t]*(%[^\n]*)?/\n { + { + + printf("\"%s\", line %d: {argument} missing for \\begin\n", + file_name, line_count) ; + ++warn_count; + }} + +[^\}\n]+ { + { + if (strcmp( yytext, "verbatim" ) == 0 ) + { + input(); + BEGIN(VERBATIM); + } + else + { + push(yytext, 2, line_count); + + if ( strcmp (yytext, "sl" ) == 0 + || strcmp (yytext, "it" ) == 0) + CG_ITALIC = 1; + else if (strcmp (yytext, "normalshape") == 0) + CG_ITALIC = 0; + else if (strcmp (yytext, "em") == 0) + CG_ITALIC = !CG_ITALIC; + + input(); + BEGIN(INITIAL); + } + }} + +\\end[ \t]*\{verbatim\} { BEGIN(INITIAL); } + +\t { + printf("\"%s\", line %d: TAB character in verbatim environment\n", + file_name, line_count) ; + ++warn_count; + } + +. { ; } + +\n { ++line_count; } + + +\\verb\*?. { + verb_char = yytext[yyleng-1]; + BEGIN(VERB); + } + +\n { + printf("\"%s\", line %d: \\verb should not contain end of line characters\n", + file_name, line_count) ; + ++line_count; +} + +. { + if ( *yytext == verb_char ) + BEGIN(INITIAL); +} + + +\\end[ \t]*"{" { BEGIN(E_ENVIRONMENT); } + +\\end[ \t]*(%[^\n]*)?/\n { + { + printf("\"%s\", line %d: {argument} missing for \\end\n", + file_name, line_count) ; + ++warn_count; + }} + + +[^\}\n]+ { + { + e_checkend(2, yytext); + input(); + + BEGIN(INITIAL); + }} + + +{ws}({letter}".")*{letter}*{l_letter}"."/{non_par_ws}+{l_letter} { + { + linecount(); + printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", + file_name, line_count, ++yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + +({l_letter}".")*{letter}*{l_letter}"."/{non_par_ws}+{l_letter} { + { + printf( "\"%s\", line %d: missing `\\ ' after \"%s\"\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + +{non_abbrev}/{non_par_ws}{u_letter} { + { + linecount(); + printf("\"%s\", line %d: missing `\\@' before `.' in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count ; + BEGIN(INITIAL); + }} + +({hard_space}{space}|{space}{hard_space}) { + + printf("\"%s\", line %d: double space at \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + +{c_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?\\ldots{ws}?(\\(\.|\,|\;|\:))*{ws}?{c_bin} { + printf("\"%s\", line %d: \\ldots should be \\cdots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + } + +[^\\]{l_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?\\cdots{ws}?(\\(\.|\,|\;|\:))*{ws}?[^\\]{l_bin} { + printf("\"%s\", line %d: \\cdots should be \\ldots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + +{c_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?"."+{ws}?(\\(\.|\,|\;|\:))*{ws}?{c_bin} { + printf("\"%s\", line %d: Dots should be \\cdots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + } + +[^\\]{l_bin}{ws}?(\\(\.|\,|\;|\:))*{ws}?"."+{ws}?(\\(\.|\,|\;|\:))*{ws}?[^\\]{l_bin} { + printf("\"%s\", line %d: Dots should be \\ldots in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + } + + +\.\.\. { + printf("\"%s\", line %d: Dots should be ellipsis \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + } + +\\label\{[^#$%^&*+={\~"<>\n\t }]*[#$%^&*+={\~"<>\n\t ][^%}]*\} { + linecount(); + printf("\"%s\", line %d: bad character in label \"%s\", see C.10.2\n", + file_name, line_count, yytext); + } + +{par}"\\"ref/[^A-Za-z] { + linecount(); + BEGIN(INITIAL); + } + +{ws}"\\"ref/[^A-Za-z] { + linecount(); + printf("\"%s\", line %d: perhaps you should insert a `~' before \"%s\"\n", + file_name, line_count, ++yytext); + BEGIN(INITIAL); + } + +{ws}"\\"footnote/[^A-Za-z] { + linecount(); + printf("\"%s\", line %d: whitespace before footnote in \"%s\"\n", + file_name, line_count, ++yytext); + BEGIN(INITIAL); + } + + +{primitive}/[^a-zA-Z] { + { + printf("\"%s\", line %d: Don't use \"%s\" in LaTeX documents\n", + file_name, line_count, yytext); + ++warn_count ; + }} + +\\left{ws}*\\?. { linecount() ;} +\\right{ws}*\\?. { linecount(); } + +[^\{]\\{font_spec}/[ \t]*"{" { + { + linecount(); + printf("\"%s\", line %d: Fontspecifiers don't take arguments. \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + /* (void) input(); */ + BEGIN(INITIAL); + }} + +\\([a-zA-Z\@]+\@[a-zA-Z\@]*|[a-zA-Z\@]*\@[a-zA-Z\@]+) { + { + printf("\"%s\", line %d: Do not use @ in LaTeX macro names. \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + }} + +{ws}"'"+{letter}+ { + { + linecount(); + printf("\"%s\", line %d: Use ` to begin quotation, not ' \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + +{letter}+"`" { + { + printf("\"%s\", line %d: Use ' to end quotation, not ` \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + BEGIN(INITIAL); + }} + + +{ws}+{punct} { + { + printf("\"%s\", line %d: Whitespace before punctation mark in \"%s\"\n", + file_name, line_count, yytext); + ++warn_count; + linecount(); + BEGIN(INITIAL); + }} + +"%" { BEGIN(COMMENT); } + +\n { BEGIN(INITIAL); ++line_count; } + +. { ; } + + +\\(input|include)([ \t]|"{") { BEGIN(INCLUDE); } + +[^\}\n]+ { + { + if ( strstr(yytext,".sty") == NULL ) + { + printf("** %s:\n", yytext); + input_file(yytext); + } + else + { + printf("\"%s\", line %d: Style file `%s\' omitted.\n", + file_name, + line_count, + yytext); + input(); + } + BEGIN(INITIAL); + }} + +\\endinput/[^A-Za-z] | +<> { + if (--istackp < 0) + yyterminate(); + + else + { + fclose(yyin); + f_checkend(file_name); + yy_switch_to_buffer(istack[istackp].stream); + free(file_name); + line_count = istack[istackp].linenum; + file_name = istack[istackp].name; + input(); + BEGIN(INITIAL); + } + + } + + +. { ; } +%% +int main(int argc, char *argv[]) +{ + /* allocate initial stacks */ + gstack = (tex_group *)malloc(gstack_size * sizeof(tex_group)); + istack = (input_ *)malloc(istack_size * sizeof(input_)); + if ( gstack == NULL || istack == NULL ) { + fprintf(stderr, "%s: not enough memory for stacks\n", PROGNAME); + exit(3); + } + + if(argc > 1) + { + if ( (file_name = (char*) malloc(strlen(argv[1]) + 5)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + + strcpy(file_name, argv[1]); + strcat(file_name, ".tex" ); + + if ((yyin = fopen( file_name, "r")) != NULL ) + { + push(file_name, 3, 1); + yylex(); + f_checkend(file_name); + } + else { + file_name[strlen(file_name) - 4] = '\0'; + if ((yyin = fopen( file_name, "r")) != NULL ) + { + push(file_name, 3, 1); + yylex(); + f_checkend(file_name); + } + else + fprintf(stderr, + "%s: Could not open : %s\n",PROGNAME, argv[1]); + } + } + else + { + printf("\n* %s *\n\n",PROGNAME); + printf("\t...a consistency checker for LaTeX documents.\n"); + printf("$Id: lacheck.lex,v 1.26 1998/03/07 07:46:45 abraham Exp $\n\n"); + + printf("Usage:\n\tlacheck filename[.tex] \n\n\n"); + + printf("\tFrom within Emacs:\n\n"); + printf("\tM-x compile RET lacheck filename[.tex] RET\n\n"); + printf("\tUse C-x ` to step through the messages.\n\n"); + printf("\n\tThe found context is displayed in \"double quotes\"\n\n"); + printf("Remark:\n\tAll messages are only warnings!\n\n"); + printf("\tYour document may be right even though LaCheck says "); + printf("something else.\n\n"); + } + return(0); +} + +int yywrap(void) { return 1; } + +#ifdef NEED_STRSTR +char * +strstr(string, substring) + register char *string; /* String to search. */ + char *substring; /* Substring to try to find in string. */ +{ + register char *a, *b; + + /* First scan quickly through the two strings looking for a + * single-character match. When it's found, then compare the + * rest of the substring. + */ + + b = substring; + if (*b == 0) { + return string; + } + for ( ; *string != 0; string += 1) { + if (*string != *b) { + continue; + } + a = string; + while (1) { + if (*b == 0) { + return string; + } + if (*a++ != *b++) { + break; + } + } + b = substring; + } + return (char *) 0; +} +#endif /* NEED_STRSTR */ + +void push(const char *p_name, int p_type, int p_line) +{ + if ( gstackp == gstack_size ) { /* extend stack */ + gstack_size *= 2; + gstack = (tex_group *)realloc(gstack, gstack_size * sizeof(tex_group)); + if ( gstack == NULL ) { + fprintf(stderr, "%s: stack out of memory", PROGNAME); + exit(3); + } + } + + if ( (gstack[gstackp].s_name = + (char *)malloc(strlen(p_name) + 1)) == NULL || + (gstack[gstackp].s_file = + (char *)malloc(strlen(file_name) + 1)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + + strcpy(gstack[gstackp].s_name, p_name); + gstack[gstackp].s_type = p_type; + gstack[gstackp].s_line = p_line; + gstack[gstackp].italic = ( (p_type == 4 || p_type == 5) + ? 1 + : ( gstackp + ? gstack[gstackp - 1].italic + : 0)); + strcpy(gstack[gstackp].s_file,file_name); + ++gstackp; + +} + +void input_file(char *file_nam) +{ + char *tmp_file_name; + FILE *tmp_yyin; + + if ( (tmp_file_name = (char*) malloc(strlen(file_nam) + 5)) == NULL ) { + fprintf(stderr, "%s: out of memory\n", PROGNAME); + exit(3); + } + strcpy(tmp_file_name,file_nam); + + if (istackp == istack_size) { /* extend stack */ + istack_size *= 2; + istack = (input_ *)realloc(istack, istack_size * sizeof(input_)); + if ( istack == NULL ) { + fprintf(stderr, "%s: \\input stack out of memory\n", PROGNAME); + exit(3); + } + } + + istack[istackp].stream = YY_CURRENT_BUFFER; + istack[istackp].linenum = line_count; + istack[istackp].name = file_name; + ++istackp; + + (void) strcat(tmp_file_name, ".tex"); + if ((tmp_yyin = fopen( tmp_file_name, "r")) != NULL ) + { + yyin = tmp_yyin; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); + file_name = tmp_file_name; + push(file_name, 3, 1); + line_count = 1; + } + else { + tmp_file_name[strlen(tmp_file_name) - 4] = '\0'; + if ((tmp_yyin = fopen( tmp_file_name , "r")) != NULL ) + { + yyin = tmp_yyin; + yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE)); + file_name = tmp_file_name; + push(file_name, 3, 1); + line_count = 1; + } + else + { + --istackp; + free(tmp_file_name); + printf("\"%s\", line %d: Could not open \"%s\"\n", + file_name, + line_count, + file_nam); + input(); + } + } +} + +void pop(void) +{ + if ( gstackp == 0 ) + { + fprintf(stderr, "%s: Stack underflow\n", PROGNAME); + exit(4); + } + --gstackp; + + free(gstack[gstackp].s_name); + free(gstack[gstackp].s_file); +} + +static void print_bg_command(char *name) +{ + + switch (CG_TYPE) { + + case 2: + printf("\\begin{%s}", name); + break; + + case 3: + printf("beginning of file %s", name); + break; + + case 4: + printf("math begin %s", name); + break; + + case 5: + printf("display math begin %s", name); + break; + + default: + printf("%s", name); + + } +} + +static void print_eg_command(char *name, int type) +{ + + switch (type) { + + case 2: + printf("\\end{%s}", name); + break; + + case 3: + printf("end of file %s", name); + break; + + case 4: + printf("math end %s", name); + break; + + case 5: + printf("display math end %s", name); + break; + + default: + printf("%s", name); + break; + } +} + + +void g_checkend(int n) +{ + if ( check_top_level_end(yytext,n) == 1 ) + { + if ( CG_TYPE != n ) + print_bad_match(yytext,n); + else + pop(); + } +} + +void e_checkend(int n, char *name) +{ + if ( check_top_level_end(name,n) == 1 ) + { + if ( CG_TYPE != n || strcmp( CG_NAME, name ) != 0 ) + print_bad_match(name,n); + + pop(); + + } +} + +void f_checkend(char *name) +{ + if ( check_top_level_end(name,3) == 1 ) + { + if ( CG_TYPE != 3 || strcmp( CG_NAME, name ) != 0 ) + + while( CG_TYPE != 3 ) + { + print_bad_match(name,3); + pop(); + } + + pop(); + } +} + +void print_bad_match(char *end_command, int type) +{ + printf("\"%s\", line %d: <- unmatched \"", + file_name, + line_count); + print_eg_command(end_command, type); + printf("\"\n"); + + printf("\"%s\", line %d: -> unmatched \"", + CG_FILE, + CG_LINE); + print_bg_command(CG_NAME); + printf("\"\n"); + warn_count += 2; +} + +int check_top_level_end(char *end_command, int type) +{ + if ( gstackp == 0 ) + { + printf("\"%s\", line %d: \"", + file_name, + line_count); + print_eg_command(end_command, type); + printf("\" found at top level\n"); + ++warn_count; + return(0); + } + else + return(1); +} + +void linecount(void) +{ + int i; + for (i = 0; i < yyleng; i++) + if(yytext[i] == '\n') + line_count++; +} + diff --git a/Build/source/utils/lacheck/lacheck.man b/Build/source/utils/lacheck/lacheck.man new file mode 100644 index 00000000000..783a07c6d74 --- /dev/null +++ b/Build/source/utils/lacheck/lacheck.man @@ -0,0 +1,108 @@ +.TH "LaCheck" "1" "2010-12-10" "Release @REV@" +.SH NAME +lacheck - A consistency checker for LaTeX documents. +.SH SYNOPSIS +.B lacheck +.IR filename [ \fB.tex\fP ] +.SH DESCRIPTION +LaCheck is a general purpose consistency checker for LaTeX documents. +It reads a LaTeX document and displays warning messages, if it finds +bad sequences. It should be noted, that the badness is +.I very +subjective. LaCheck is designed to help find common mistakes in LaTeX +documents, especially those made by beginners. +.LP +The things checked are: +.LP +Mismatched groups (braces), environments and math mode +delimiters. When a mismatch is found, line numbers for +.I "both" +start and end of the mismatch is given. The error messages comes in +pairs, one for the end match and one for the beginning, marked with +\`<-\' and \`->\' respectively. +.LP +Bad spacing including missing a \`\\ \' after an abbreviation, missing +an \`\\@\' before a punctuation mark in a paragraph that is ended by +an capital letter, double spaces like \` \~\', bad usage of ellipsis +(like using ... instead of \\ldots, or using \\ldots where \\cdots +should be used), missing \~ before a \\cite or \\ref commands, space +before footnotes, italic corrections before comma, point, or italic +text, italic correction after normal text, missing italic correction +when switching from italic to normal text, and double italic +correction. +.LP +Badly placed punctuation marks around end of math mode +delimiters. This is, punctuation placed right after display math end +or punctuation placed right before text math end. Sequences of +whitespace followed by punctuation marks are also caught. +.LP +Bad use of quotation characters, i.e. constructs like "\'word" or +"word\`" are warned about, tabs in verbatim environments are caught, +certain TeX primitives are frowned upon, attempts to give font +specifiers arguments such as \\em{text} are noted, and use of @ in +LaTeX macros are reported. +.LP +LaCheck will read files that are input using \\input or \\include. +Files with suffix \`.sty\' are omitted, as they probably will cause +LaCheck to crash. +.LP +LaCheck may be invoked from within Emacs(1) using compile: + +To run: +.B "M-x compile RET lacheck RET" +, and then +.B "C-x `" +to parse the messages + +.SH OUTPUT +The output is UNIX-error like, and may be parsed using Emacs(1) +compile mode. Here is a sample: + +.PD 0 +lacheck compiler +.TP +"/usr/mef/compiler.tex", line 34: missing \`\\\\\\\\ \' after "etc." +.TP +"/usr/mef/compiler.tex", line 179: double space at " ~" +.TP +"/usr/mef/compiler.tex", line 186: <- unmatched "}" +.TP +"/usr/mef/compiler.tex", line 181: -> unmatched "$$" +.PD 1 +.LP +A control space \`\\ \' should be inserted at line 34, to prevent an +end-of-sentence space. +Also, at line 179, the first space of the sequence " ~" should +probably be deleted. +The last two lines is an example, where the user mistyped, and +probably inserted an extra "}" somewhere. + +.SH DIAGNOSTICS +Some special cases should be explained. In cases where a sentence ends +with something that LaCheck thinks is an abbreviation an missing \`\\ +\' error may also occur, if the following sentence begins with a +lowercase letter. +.LP +A mismatch error may cause more to follow, due to the chosen +algorithm. In such cases just correct the +.I "first" +error and run LaCheck again +.LP +Braces, environments and math mode must be balanced within a file. +.LP +LaCheck may be confused by unmatched stuff placed inside verbatim-like +environments called something else than exactly \`verbatim\'. +.SH SEE ALSO +tex(1), emacs(1), latex(1) +.SH BUGS +LaCheck gets confused by advanced macros, is fooled by simple macros, +can't figure out if you use a non-standard way to switch italic on or +off, does not like TeX at all, does not provide any options to turn +off specific warnings, and is at best a crude approximation. +.LP +Ideas for improvements and bug reports are very welcome. Such +should be directed to the maintainers, their email address is +. +.SH AUTHOR +Kresten Krab Thorup with modifications by Per Abrahamsen. + diff --git a/Build/source/utils/lacheck/lacheck.test b/Build/source/utils/lacheck/lacheck.test new file mode 100755 index 00000000000..b92b0cafacf --- /dev/null +++ b/Build/source/utils/lacheck/lacheck.test @@ -0,0 +1,10 @@ +#! /bin/sh + +# Copyright (C) 2009-2014 Peter Breitenlohner +# You may freely use, modify and/or distribute this file. + +./lacheck $srcdir/test.tex | \ + sed -e "s!$srcdir/test.tex!./test.tex!g" >test.out || exit 1 + +diff $srcdir/test.old test.out || exit 1 + diff --git a/Build/source/utils/lacheck/make_vms.com b/Build/source/utils/lacheck/make_vms.com new file mode 100644 index 00000000000..24d224733a0 --- /dev/null +++ b/Build/source/utils/lacheck/make_vms.com @@ -0,0 +1,16 @@ +$ if f$trnlnm("sys_arch").eqs."ALPHA" +$ then +$ CC :== CC/NoList/opt=level=4/standard=vaxc +$ else +$ CC :==gcc/Nostandard/NoCase_Hack/NoList +$ endif +$ LINK :== Link/NoMap +$ CC lacheck.c +$ if f$trnlnm("sys_arch").eqs."ALPHA" +$ then +$ LINK lacheck.obj +$ else +$ LINK lacheck.obj,gnu_cc:[000000]GCCLIB/LIB, sys$share:vaxcrtl/opt +$ endif +$ Library/Help/Create=Blocks:10 lacheck.hlb lacheck.hlp +$ EXIT diff --git a/Build/source/utils/lacheck/test.old b/Build/source/utils/lacheck/test.old new file mode 100644 index 00000000000..015686391c0 --- /dev/null +++ b/Build/source/utils/lacheck/test.old @@ -0,0 +1,33 @@ +"./test.tex", line 3: possible unwanted space at "{" +"./test.tex", line 4: you may need a \/ before "world" +"./test.tex", line 5: \/ not needed before italic text "world" +"./test.tex", line 6: \/ not needed after non-italic text "hello" +"./test.tex", line 7: double \/ found "\/" +"./test.tex", line 8: do not use \/ before "," +"./test.tex", line 9: punctuation mark "." should be placed before end of displaymath +"./test.tex", line 10: punctuation mark "." should be placed after end of math mode +"./test.tex", line 11: {argument} missing for \begin +"./test.tex", line 13: TAB character in verbatim environment +"./test.tex", line 15: {argument} missing for \end +"./test.tex", line 16: missing `\ ' after "a.k.a." +"./test.tex", line 17: missing `\@' before `.' in "HELLO." +"./test.tex", line 18: double space at "~ " +"./test.tex", line 19: \ldots should be \cdots in "+ \ldots +" +"./test.tex", line 20: \cdots should be \ldots in " , \cdots ," +"./test.tex", line 21: Dots should be \cdots in "+ .. +" +"./test.tex", line 22: Dots should be \ldots in " , .. ," +"./test.tex", line 23: Dots should be ellipsis "..." +"./test.tex", line 24: bad character in label "\label{hello evil world}", see C.10.2 +"./test.tex", line 25: perhaps you should insert a `~' before "\ref" +"./test.tex", line 26: whitespace before footnote in "\footnote" +"./test.tex", line 27: Don't use "\above" in LaTeX documents +"./test.tex", line 28: Fontspecifiers don't take arguments. " \rm" +"./test.tex", line 29: Do not use @ in LaTeX macro names. "\hello@world" +"./test.tex", line 30: Use ` to begin quotation, not ' " ''world" +"./test.tex", line 31: Use ' to end quotation, not ` "hello`" +"./test.tex", line 32: Whitespace before punctation mark in " ." +"./test.tex", line 34: <- unmatched "display math end \]" +"./test.tex", line 33: -> unmatched "math begin \(" +"./test.tex", line 35: \verb should not contain end of line characters +"./test.tex", line 43: <- unmatched "end of file ./test.tex" +"./test.tex", line 33: -> unmatched "math begin \(" diff --git a/Build/source/utils/lacheck/test.tex b/Build/source/utils/lacheck/test.tex new file mode 100644 index 00000000000..98b18c1e3b5 --- /dev/null +++ b/Build/source/utils/lacheck/test.tex @@ -0,0 +1,42 @@ +% $Revision: 1.4 $ + +{ } % Unwanted space after `{' +{\em hello} world % May need `\/' before `world' +{\em hello\/ world}. % `\/' not needed before `world' +hello\/ world % `\/' not needed after `hello' +{\em hello\/}\/ world % Double `\/' +{\em hello\/}, world % `\/' before `,' or `.' +\[display math\]. % Punctuation mark after end of display math +$math.$ % Punctuation mark before end of math mode +\begin % Missing argument for \begin +\begin{verbatim} +TAB TAB % Tab in verbatim +\end{verbatim} +\end % Missing argument for \end +a.k.a. world % Missing `\ ' after abbreviation +HELLO. World % Missing `\@' before `.' +hello~ world % Double space +$ + \ldots + $ % Should be \cdots +$ , \cdots , $ % Should be \ldots +$ + .. + $ % Should be \cdots +$ , .. , $ % Should be \ldots +hello world... % Should be ellipsis +\label{hello evil world} % Bad character in label +Hello \ref{world} % Missing ~ +Hello \footnote{world} % Whitespace before footnote +\above % Primitive in LaTeX +hello \rm{world} % Font specifier with argument +\hello@world % @ in LaTeX macro name +hello ''world'' % Quote begined with ' +``hello`` world % Quote ended with ` +world . % Whitespace before punctuation mark +\(hello +world\] % Bad match +\verb|hello +world| % multi-line \verb + +% Local Variables: +% mode: LaTeX +% TeX-master: t +% TeX-auto-update: nil +% End: -- cgit v1.2.3