From adb3d29549c984ed91b358c3246dcff9df449bc9 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Fri, 25 May 2018 22:31:52 +0000 Subject: latexmk (25may18) git-svn-id: svn://tug.org/texlive/trunk@47836 c570f23f-e606-0410-a88d-b1316a301751 --- .../texk/texlive/linked_scripts/latexmk/latexmk.pl | 483 ++++++++++++++++----- .../texk/texlive/linked_scripts/texlive/tlmgr.pl | 48 +- 2 files changed, 392 insertions(+), 139 deletions(-) (limited to 'Build/source/texk') diff --git a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl index d83a2440ce8..4f7aa737664 100755 --- a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl +++ b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl @@ -121,8 +121,8 @@ use warnings; $my_name = 'latexmk'; $My_name = 'Latexmk'; -$version_num = '4.55'; -$version_details = "$My_name, John Collins, 17 Jan. 2018"; +$version_num = '4.56'; +$version_details = "$My_name, John Collins, 25 May 2018"; use Config; use File::Basename; @@ -221,7 +221,38 @@ else { ## ## 12 Jan 2012 STILL NEED TO DOCUMENT some items below ## +## 24,25 May 2018 John Collins Fix problem of .bib files not found with msys. +## Add use of environment variable LATEXMKRCSYS +## 12 May 2018 John Collins Simplify code in run_bibtex. +## 3,9 May 2018 John Collins Improved diagnostics on mismatch of output filenames +## 28,30 Apr 2018 John Collins Improve error messages for bib files not found +## 26 Apr 2018 John Collins In testing for different expected and actual +## output of primary run, normalize $$Pdest, to +## avoid spurious warnings. +## 4 Apr 2018 John Collins Version 4.56. +## Get TeX disribution in .log file +## Start on dealing with aux_dir and out_dir +## that didn't get used as intended. +## And on fls_file that didn't get made when expected. +## Need to finish: +## 15 Mar 2018 John Collins Version 4.55d. +## In test for non-existent file in fls, don't give +## warning. +## Add corresponding test for files reported as +## output that no longer exist. +## (See minted package for cases where reported +## input and output files don't exist at end of run.) +## 15 Mar 2018 John Collins Version 4.55c. +## Move test for non-existent file in fls to calling routine. +## 15 Mar 2018 John Collins Deal with non-existent input files reported in +## fls file. (Needed to work around bug in lualatex +## in TeXLive 2016, 2017 and pretest 2018 (as of the +## version of 2018 Mar 4). +## 2 Feb 2018 John Collins Version 4.55b. Correct parsing of biber's log file. +## 25 Jan 2018 John Collins Implement $warning_cmd +## 24 Jan 2018 John Collins Version number to 4.55a. Implement warnings_as_errors option ## 17 Jan 2018 John Collins Version number to 4.55. Ready for release. +## Release v. 4.55 on CTAN. ## 15, 16 Jan 2018 John Collins Correct bug in measuring filetime offset. ## 14 Jan 2018 John Collins Correct issue with possible filetime offset ## on remote file system. @@ -322,6 +353,12 @@ $log_wrap = 79; ## Most of these variables represents the external command needed to ## perform a certain action. Some represent switches. + +## Which TeX distribution is being used +## E.g., "MiKTeX 2.9", "TeX Live 2018" +## "" means not determined. Obtain from first line of .log file. +$tex_distribution = ''; + ## Commands to invoke latex, pdflatex, etc $latex = 'latex %O %S'; $pdflatex = 'pdflatex %O %S'; @@ -354,6 +391,8 @@ add_input_ext( 'lualatex', 'tex', 'jpg', 'pdf', 'png' ); add_input_ext( 'xelatex', 'tex', 'jpg', 'pdf', 'png' ); #show_input_ext( 'latex' ); show_input_ext( 'pdflatex' ); +%allowed_output_ext = ( ".dvi" => 1, ".xdv" => 1, ".pdf" => 1 ); + # Information about options to latex and pdflatex that latexmk will simply # pass through to (pdf)latex # Option without arg. maps to itself. @@ -595,6 +634,10 @@ $new_viewer_always = 0; # If 1, always open a new viewer in pvc mode. # If 0, only open a new viewer if no previous # viewer for the same file is detected. +# Commands for use in pvc mode for compiling, success, warnings, and failure; +# they default to empty, i.e., not to use: +$compiling_cmd = $success_cmd = $warning_cmd = $failure_cmd = ""; + # Commands for printing are highly system dependent, so default to NONE: $lpr = 'NONE $lpr variable is not configured to allow printing of ps files'; $lpr_dvi = 'NONE $lpr_dvi variable is not configured to allow printing of dvi files'; @@ -1064,6 +1107,7 @@ $aux_dir = ''; # Directory for aux files (log, aux, etc). ## default flag settings. $recorder = 1; # Whether to use recorder option on latex/pdflatex $silent = 0; # Silence latex's messages? +$warnings_as_errors = 0;# Treat warnings as errors and exit with non-zero exit code $silence_logfile_warnings = 0; # Do list warnings in log file $kpsewhich_show = 0; # Show calls to and results from kpsewhich $landscape_mode = 0; # default to portrait mode @@ -1149,10 +1193,11 @@ $cleanup_fdb = 0; # No removal of file for latexmk's file-database $cleanup_only = 0; # When doing cleanup, do not go on to making files $cleanup_includes_generated = 0; # Determines whether cleanup deletes files generated by - # custom dependencies + # (pdf)latex (found from \openout lines in log file). + # It's more than that. BUG $cleanup_includes_cusdep_generated = 0; # Determines whether cleanup deletes files generated by - # (pdf)latex (found from \openout lines in log file). + # custom dependencies $diagnostics = 0; $dvi_filter = ''; # DVI filter command $ps_filter = ''; # Postscript filter command @@ -1188,11 +1233,13 @@ $updated = 0; # Flags when something has been remade $waiting = 0; # Flags whether we are in loop waiting for an event # Used to avoid unnecessary repeated o/p in wait loop -# Used for some results of parsing log file: +# The following are used for some results of parsing log file +# Global variables, so results can be reported in main program. $reference_changed = 0; $mult_defined = 0; $bad_reference = 0; $bad_citation = 0; +@primary_warning_summary = (); # Cache of expensive-to-compute state variables, e.g., cwd in form # fixed to deal with cygwin issues. @@ -1522,7 +1569,20 @@ sub read_first_rc_file_in_list { # So test on $auto_rc_use in each case. if ( $auto_rc_use ) { # System rc file: - read_first_rc_file_in_list( @rc_system_files ); + if (exists $ENV{LATEXMKRCSYS} ) { + push @rc_system_files, $ENV{LATEXMKRCSYS}; + if ( !-e $ENV{LATEXMKRCSYS} ) { + warn "$My_name: you've specified a system rc file `$ENV{LATEXMKRCSYS}`\n", + " in environment variable LATEXMKRCSYS, but the file doesn't exist.\n", + " I won't read any system rc file.\n"; + } + else { + process_rc_file( $ENV{LATEXMKRCSYS} ); + } + } + else { + read_first_rc_file_in_list( @rc_system_files ); + } } if ( $auto_rc_use && ($HOME ne "" ) ) { # User rc file: @@ -1708,6 +1768,7 @@ while ($_ = $ARGV[0]) elsif (/^-view=none$/) { $view = "none";} elsif (/^-view=ps$/) { $view = "ps";} elsif (/^-view=pdf$/) { $view = "pdf"; } + elsif (/^-Werror$/){ $warnings_as_errors = 1; } elsif (/^-lualatex$/) { $pdf_mode = 4; $dvi_mode = $postscript_mode = 0; @@ -1800,33 +1861,26 @@ if ( ($out_dir ne '') && ($aux_dir eq '') ){ $aux_dir = $out_dir; } -# Normalize versions terminating in directory/path separator -# and versions referring to current directory -$out_dir1 = $out_dir; -$aux_dir1 = $aux_dir; -foreach ( $aux_dir1, $out_dir1 ) { - if ( ($_ ne '') && ! m([\\/\:]$) ) { - $_ .= '/'; - } - while ( s[^\.\/][] ) {} -} - -# At least one widely package (revtex4-1) generates a bib file -# (which is used in revtex4-1 for putting footnotes in the reference -# list), and bibtex must be run to use it. But latexmk needs to -# determine the existence of the bib file by use of kpsewhich, otherwise -# there is an error. So cope with this situation (and any analogous -# cases by adding the aux_dir to the relevant path search environment -# variables. BIBINPUTS seems to be the only one currently affected. -foreach ( 'BIBINPUTS' ) { - if ( exists $ENV{$_} ) { - $ENV{$_} = $aux_dir.$search_path_separator.$ENV{$_}; - } - else { - $ENV{$_} = $aux_dir.$search_path_separator; - } +# Save original values for use in diagnositics. +# We may change $aux_dir and $out_dir after a detection +# of results of misconfiguration. +$aux_dir_requested = $aux_dir; +$out_dir_requested = $out_dir; +# The following reports results of diagnostics on location of .log file +# after the first run of a latex engine, when actually used aux_dir +# may not be the expected one, due to a configuration error. +# Values: -1 uninitialized (before first run) +# 0 log file not found; +# 1 log file in aux_dir; +# 2 log file **not** in aux_dir but in out_dir; +# 3 log file **not** in aux_dir or out_dir, but in cwd. +$where_log = -1; + +foreach ( 'BIBINPUTS', 'TEXINPUTS' ) { + if ( exists $ENV{$_} ) { $ENV_ORIG{$_} = $ENV{$_}; } } +&set_dirs_etc; if ($bibtex_use > 1) { push @generated_exts, 'bbl'; @@ -2112,22 +2166,6 @@ foreach (@generated_exts ) { $generated_exts_all{$_} = 1; } -if ($aux_dir) { - # Ensure $aux_dir is in TEXINPUTS search path. - # This is used by dvips for files generated by mpost. - if ( ! exists $ENV{TEXINPUTS} ) { - # Note the trailing ":" which ensures that the last item - # in the list of paths is the empty path, which actually - # means the default path, i.e., the following means that - # the TEXINPUTS search path is $aux_dir and the standard - # value. - $ENV{TEXINPUTS} = $aux_dir.$search_path_separator; - } - elsif ( $ENV{TEXINPUTS} !~ /$aux_dir$search_path_separator/ ) { - $ENV{TEXINPUTS} = $aux_dir.$search_path_separator.$ENV{TEXINPUTS}; - } -} - $quell_uptodate_msgs = $silent; # Whether to quell informational messages when files are uptodate # Will turn off in -pvc mode @@ -2222,9 +2260,7 @@ foreach $filename ( @file_list ) $root_filename = $jobname; } - $aux_main = "$aux_dir1$root_filename.aux"; - $log_name = "$aux_dir1$root_filename.log"; - $fdb_name = "$aux_dir1$root_filename.$fdb_ext"; + &set_names; # Initialize basic dependency information: @@ -2489,6 +2525,13 @@ foreach $filename ( @file_list ) if ( ( $failure <= 0 ) || $force_mode ) { rdb_for_some( [keys %one_time], \&rdb_run1 ); } + if ($#primary_warning_summary > -1) { + # N.B. $mult_defined, $bad_reference, $bad_citation also available here. + if ($warnings_as_errors) { + $failure = 1; + $failure_msg = "Warning(s) from latex (or c.) for '$filename'; treated as error"; + } + } if ($failure > 0) { next FILE; } } # end FILE continue { @@ -2502,8 +2545,11 @@ continue { if ( $failure_msg ) { #Remove trailing space $failure_msg =~ s/\s*$//; - warn "$My_name: Did not finish processing file '$filename':\n", + warn "----------------------\n"; + warn "This message may duplicate earlier message.\n"; + warn "$My_name: Failure in processing file '$filename':\n", " $failure_msg\n"; + warn "----------------------\n"; $failure = 1; } } @@ -2542,14 +2588,66 @@ if ($failure_count > 0) { } if ( !$force_mode ) { warn "$My_name: Use the -f option to force complete processing,\n", - " unless error was exceeding maximum runs of latex/pdflatex.\n"; + " unless error was exceeding maximum runs, or warnings treated as errors.\n"; } exit 12; } +if ( $where_log == 2 ) { + warn "$My_name: You requested aux_dir '$aux_dir_requested',\n". + " but '$aux_dir' was used by the (pdf)latex engine.\n". + " That indicates a configuration error.\n"; + if ( ($tex_distribution !~ /^MiKTeX/i) && ($aux_dir_requested ne $out_dir_requested) ) { + warn " Probably you set different aux and out directories,\n". + " but that is not supported by your TeX distribution.\n". + " The only current distribution supporting this is MiKTeX.\n"; + } +} + # end MAIN PROGRAM +############################################################# +############################################################# + +sub set_dirs_etc { + # Normalize versions terminating in directory/path separator + # and versions referring to current directory + # These actions in a subroutine so they can be used elsewhere. + $out_dir1 = $out_dir; + $aux_dir1 = $aux_dir; + foreach ( $aux_dir1, $out_dir1 ) { + if ( ($_ ne '') && ! m([\\/\:]$) ) { + $_ .= '/'; + } + while ( s[^\.\/][] ) {} + } + if ($aux_dir) { + # Ensure $aux_dir is in BIBINPUTS and TEXINPUTS search paths. + # TEXINPUTS is used by dvips for files generated by mpost. + # For BIBINPUTS, + # at least one widely package (revtex4-1) generates a bib file + # (which is used in revtex4-1 for putting footnotes in the reference + # list), and bibtex must be run to use it. But latexmk needs to + # determine the existence of the bib file by use of kpsewhich, otherwise + # there is an error. So cope with this situation (and any analogous + # cases by adding the aux_dir to the relevant path search environment + # variables. BIBINPUTS seems to be the only one currently affected. + foreach ( 'BIBINPUTS', 'TEXINPUTS' ) { + if ( exists $ENV_ORIG{$_} ) { + $ENV{$_} = $aux_dir.$search_path_separator.$ENV_ORIG{$_}; + } + else { + # Note the trailing ":" or ";" which ensures that the last item + # in the list of paths is the empty path, which actually + # means the default path, i.e., the following means that + # the search path is $aux_dir and the standard value. + $ENV{$_} = $aux_dir.$search_path_separator; + } + } + } +} + ############################################################# sub fix_cmds { @@ -3184,7 +3282,13 @@ CHANGE: } } else { - if ($success_cmd) { + if ( ($#primary_warning_summary > -1) && $warning_cmd ) { + Run_subst( $warning_cmd ); + } + elsif ( ($#primary_warning_summary > -1) && $warnings_as_errors && $failure_cmd ) { + Run_subst( $failure_cmd ); + } + elsif ($success_cmd) { Run_subst( $success_cmd ); } } @@ -3574,6 +3678,7 @@ sub print_help " -view=none - no viewer is used\n", " -view=ps - viewer is for ps\n", " -view=pdf - viewer is for pdf\n", + " -Werror - treat warnings from called programs as errors\n", " -xelatex - use xelatex for processing files to pdf\n", " and turn dvi/ps modes off\n", "\n", @@ -3706,7 +3811,6 @@ sub check_biber_log { elsif ( /> INFO - Found .* '([^']+)'\s*$/ || /> INFO - Found '([^']+)'\s*$/ || /> INFO - Reading '([^']+)'\s*$/ - || /> INFO - Reading (.*)$/ || /> INFO - Processing .* file '([^']+)' .*$/ ) { if ( defined $Pbiber_source ) { @@ -3726,6 +3830,7 @@ sub check_biber_log { my @not_found = &find_file_list1( $Pbiber_source, $Pbiber_source, '', \@BIBINPUTS ); @$Pbiber_source = uniqs( @$Pbiber_source ); + if ( ($#not_found < 0) && ($#$Pbiber_source >= 0) ) { warn "$My_name: Found biber source file(s) [@$Pbiber_source]\n" unless $silent; @@ -3737,8 +3842,8 @@ sub check_biber_log { return 5; } else { - show_array( "$My_name: Failed to find one or more biber source files:", - @not_found ); + warn "$My_name: Failed to find one or more biber source files:\n"; + foreach (@not_found) { warn " '$_'\n"; } if ($force_mode) { warn "==== Force_mode is on, so I will continue. ", "But there may be problems ===\n"; @@ -3767,31 +3872,33 @@ sub run_bibtex { my $return = 999; # Prevent changes we make to environment becoming global: local %ENV = %ENV; - if ( $aux_dir ) { - # Use \Q and \E round directory name in regex to avoid interpretation - # of metacharacters in directory name: - if ( $$Psource =~ /^\Q$aux_dir1\E/ ) { - # Run bibtex in $aux_dir, fixing input search path - # to allow for finding files in original directory - my ( $base, $path, $ext ) = fileparseA( $$Psource ); - my $cwd = good_cwd(); - foreach ( 'BIBINPUTS', 'BSTINPUTS' ) { - if ( exists $ENV{$_} ) { - $ENV{$_} = $cwd.$search_path_separator.$ENV{$_}; - } - else { - $ENV{$_} = $cwd.$search_path_separator; - } + my ( $base, $path, $ext ) = fileparseA( $$Psource ); + if ( $path ) { + # Since (e.g.,) 'bibtex output/main.aux' doesn't find subsidiary .aux + # files, as from \@include{chap.aux}, we change directory to the + # directory of the top-level .aux file to run bibtex. But we have to + # fix search paths for .bib and .bst, since they may be specified + # relative to the document directory. + my $cwd = good_cwd(); + foreach ( 'BIBINPUTS', 'BSTINPUTS' ) { + if ( exists $ENV{$_} ) { + $ENV{$_} = $cwd.$search_path_separator.$ENV{$_}; } - pushd( $path ); - $return = &Run_subst( undef, undef, '', $base.$ext, '', $base ); - popd(); - } - else { - warn "$My_name: Directory in file name '$$Psource' for bibtex\n", - " but it is not the output directory '$aux_dir'\n"; - $return = Run_subst(); - } + else { + $ENV{$_} = $cwd.$search_path_separator; + } + } + pushd( $path ); + if (!$silent) { + print "$My_name: changed directory to '$path'\n", + "Set BIBINPUTS='$ENV{BIBINPUTS}'\n", + "Set BSTINPUTS='$ENV{BSTINPUTS}'\n"; + } + $return = &Run_subst( undef, undef, '', $base.$ext, '', $base ); + popd(); + if (!$silent) { + print "$My_name: changed directory back to '", cwd(), "'\n"; + } } else { $return = Run_subst(); @@ -3884,10 +3991,18 @@ sub normalize_force_directory { return normalize_filename( $filename ); } #END normalize force_directory -# ------------------------------ +#************************************************** -sub parse_log { +sub set_names { + # Set names of standard files: + $aux_main = "$aux_dir1$root_filename.aux"; + $log_name = "$aux_dir1$root_filename.log"; + $fdb_name = "$aux_dir1$root_filename.$fdb_ext"; +} + +#************************************************** +sub parse_log { # Scan log file for: dependent files # reference_changed, bad_reference, bad_citation # Return value: 1 if success, 0 if no log file. @@ -4007,6 +4122,11 @@ sub parse_log { $engine = $1; print "=== TeX engine is '$engine'\n" if (!$silent); + if ( /^This is ([^,]+), [^\(]*\(([^\)]+)\)/ ) { + $tex_distribution = $2; + print "=== TeX distribution is '$tex_distribution'\n" + if ($diagnostics); + } } else { warn "$My_name: First line of .log file '$log_name' is not in standard format.\n"; @@ -4265,7 +4385,6 @@ LINE: foreach my $pattern (@file_not_found) { if ( /$pattern/ ) { my $file = clean_filename($1); - warn "===========$My_name: Missing input file: '$file' from line\n '$_'\n"; warn "$My_name: Missing input file: '$file' from line\n '$_'\n" unless $silent; $dependents{normalize_filename($file, @pwd_log)} = 0; @@ -4654,6 +4773,72 @@ CANDIDATE_PAIR: #************************************************************ +sub find_set_log { + # Locate the log file, if possible. This allows for possible configuration + # errors, e.g., because the command for (*)latex was such that it did not + # do the setting of -output-directory or -aux-directory that the user intended, + # or because the version used did not support one or other of these options. + # Put result in $where_log (see its initial declaration/definition for details). + # Change $aux_dir and/or $out_dir as appropriate, and make consequent changes. + # + # Probably further attention to location of output file (.dvi, .pdf, or .xdv) + # could be done, to get $out_dir and $$Pdest more accurately set. + # + # Typical configuration errors that lead to the need for this subroutine: + # %O not used in command definition, so directory options don't getpassed + # to (*)latex. + # Use of $aux_dir different to $out_dir, when (*)latex doesn't support + # the -aux-directory option (notably with TeXLive distribution). + if ($where_log >= 0) { + # .log file was found on previous run. No need to repeat search, since + # if the location were to change from run to run, we'd have other + # serious difficulties that are to hard to deal with. + return; + } + if ( test_gen_file( "$aux_dir1$root_filename.log" ) ) { + # .log file is in expected place. + $where_log = 1; + } + elsif ( test_gen_file( "$out_dir1$root_filename.log" ) ) { + # .log file is in out_dir not in aux_dir. + # Presumably there is a configuration error + # that prevents aux_dir from being used by latex. + # So change $aux_dir to the actually used value. + $where_log = 2; + $aux_dir = $out_dir; + } + elsif ( test_gen_file( "$root_filename.log" ) ) { + # .log file is not in out_dir nor in aux_dir, but is in cwd. + # Presumably there is a configuration error + # that prevents the directories from being used by latex. + # So change $aux_dir to the actually used value. + $where_log = 3; + $aux_dir = ""; + } + else { + # No .log file found + $failure = 1; + $$Plast_result = 2; + $where_log = 0; + $failure_msg + = "(Pdf)LaTeX didn't generate the expected log file '$log_name'\n"; + } + if ($where_log > 1) { + warn "$My_name: Changed aux_dir from '$aux_dir_requested' to '$aux_dir'\n". + " to allow for probable configuration error\n"; + # Allow for the changes associated with change of $aux_dir: + &set_dirs_etc; + &set_names; + warn "$My_name: Actual .log file is\n", + " '$log_name'\n", + " instead of the value\n", + " '$aux_dir_requested/$root_filename.log'\n", + " that seemed to be intended.\n"; + } +} + +#************************************************************ + sub parse_fls { my ($fls_name, $Pinputs, $Poutputs, $Pfirst_read_after_write, $Ppwd_latex ) = @_; %$Pinputs = %$Poutputs = %$Pfirst_read_after_write = (); @@ -4833,22 +5018,27 @@ sub parse_aux { @$Pbib_files = uniqs( @$Pbib_files ); &find_file_list1( $Pbst_files, $Pbst_files, '.bst' ); @$Pbst_files = uniqs( @$Pbst_files ); + my @bad_bib = (); + foreach ( @$Pbib_files ) { + if ( /\s/ ) { push @bad_bib, $_; } + } + if ($#bad_bib >= 0) { + warn "$My_name: White space in an argument list for \\bibliography.\n", + " which is not allowed by bibtex. Bad arguments:\n"; + foreach (@bad_bib ) { warn " '$_'\n"; } + return 3; + } if ( $#not_found < 0) { warn "$My_name: Found bibliography file(s) [@$Pbib_files]\n" unless $silent; } else { - show_array( "$My_name: Failed to find one or more bibliography files ", - @not_found ); + warn "$My_name: Failed to find one or more bibliography files:\n"; + foreach (@not_found) { warn " '$_'\n"; } if ($force_mode) { warn "==== Force_mode is on, so I will continue. ", "But there may be problems ===\n"; } - else { - #$failure = -1; - #$failure_msg = 'Failed to find one or more bib files'; - #warn "$My_name: Failed to find one or more bib files\n"; - } return 3; } return 1; @@ -5457,10 +5647,27 @@ sub rdb_set_latex_deps { # wasn't used/analyzed, so we don't need a test as to whether the fls file was # used. foreach (keys %source_fls) { + if (! -e ) { + # File is listed in .fls file as read, but doesn't exist now. + # Therefore it is not a true source file, surely. + # Sometimes this is caused by a bug (e.g., lualatex in TeXLive 2016, + # 2017) when there is an incorrect line in .fls file. (This + # would deserve a warning.) + # But sometimes (e.g., with minted package), the file could be + # created during a run, read, and then deleted. + next; + } $dependents{$_} = 4; if ( /\.bbl$/ ) { push @bbl_files, $_; } } foreach (keys %generated_fls) { + if (! -e ) { + # File is listed in .fls file as written, but doesn't exist now. + # Therefore it is not a true externally visible generated file. + # (Typically, e.g., with the minted package, it is a temporary + # file created during a run and then deleted during the run.) + next; + } rdb_add_generated( $_ ); if ( exists($dependents{$_}) ) { $dependents{$_} = 6; @@ -5503,14 +5710,45 @@ sub rdb_set_latex_deps { # (i.e., dvi instead of pdf, or vv). This could # legitimately occur when the source file (or an invoked # package or class) sets \pdfoutput. - $missing_dvi_pdf = ''; + $missing_dvi_pdf = ''; if ($primary_out eq '') { warn "$My_name: For rule '$rule', no output was made\n"; $missing_dvi_pdf = $$Pdest; } - elsif ($primary_out ne $$Pdest) { + elsif ($primary_out ne normalize_filename($$Pdest) ) { warn "$My_name: ===For rule '$rule', actual output '$primary_out'\n", - " ======appears not to match expected output '$$Pdest'\n"; + " ======appears not to match expected output '$$Pdest'.\n", + " Further diagnostics follow:\n"; + my ($actual_base, $actual_path, $actual_ext) = fileparseA( $primary_out ); + my ($intended_base, $intended_path, $intended_ext) = fileparseA( $$Pdest ); + if ( $actual_base ne $intended_base ) { + warn " --The base names of the files are different. That is strange!!\n"; + } + if ( $actual_path ne $intended_path ) { + warn " --The paths of the files are different. I may have misunderstood\n", + " different names for the same directory, which is innocuous,\n", + " or there may be a configuration error.\n"; + } + if ( $actual_ext ne $intended_ext ) { + warn " --The extensions of the files are different, i.e., the\n", + " intended and actual types of the output differ.\n"; + if ( ! exists $allowed_output_ext{$actual_ext} ) { + warn " Actual output file has an extension '$actual_ext' that\n", + " is not one I know about\n"; + } + if ( (($actual_ext eq '.pdf') && ($intended_ext eq '.dvi')) + || (($actual_ext eq '.dvi') && ($intended_ext eq '.pdf')) + ) + { + warn " This could arise from use of \\pdfoutput in the source file,\n", + " or from a configuration error\n"; + } + else { + warn " This indicates a probable configuration error\n"; + } + warn " A future version of $my_name should be able to make dynamically\n", + " adjustments to deal with this problem\n"; + } } IDX_FILE: @@ -5766,10 +6004,10 @@ MISSING_FILE: if ( -e "$missing.tex" ) { $new_includes{"$missing.tex"} = 1; } - if ( -e $missing ) { + elsif ( -e $missing ) { $new_includes{$missing} = 1; } - if ( $ext ne "" ) { + elsif ( $ext ne "" ) { foreach my $dep (@cus_dep_list){ my ($fromext,$toext) = split('\s+',$dep); if ( ( "$ext" eq "$toext" ) @@ -6275,7 +6513,7 @@ sub rdb_make { local %pass = (); local $failure = 0; # General accumulated error flag - local $missing_dvi_pdf = ''; # Did primary run fail to make its output file? + local $missing_dvi_pdf = ''; # Did primary run fail to make its output file? local $runs = 0; local $too_many_passes = 0; local %rules_applied = (); @@ -6358,6 +6596,11 @@ sub rdb_make { rdb_for_some( [@unusual_one_time], \&rdb_make1 ); rdb_write( $fdb_name ); + if ($#primary_warning_summary > -1) { + # N.B. $mult_defined, $bad_reference, $bad_citation also available here. + show_array( "$My_name: Summary of warnings from last run of (pdf)latex:", + @primary_warning_summary ); + } if (! $silent) { if ($failure && $force_mode) { print "$My_name: Errors, in force_mode: so I tried finishing targets\n"; @@ -7037,16 +7280,14 @@ sub rdb_primary_run { } my $return_latex = &rdb_run1; + + # Need to worry about changed directory, changed output extension + # Where else is $missing_dvi_pdf set? Was it initialized? if (-e $$Pdest) { $missing_dvi_pdf = '';} - ######### Analyze results of run: - if ( ! -e $log_name ) { - $failure = 1; - $$Plast_result = 2; - $$Plast_message = $failure_msg - = "(Pdf)LaTeX failed to generate the expected log file '$log_name'"; - return -1; - } + # Handle case that log file is caused to be in an unexpected place, + # from a configuration error: + &find_set_log; if ($recorder) { # Handle problem that some version of (pdf)latex give fls files @@ -7076,7 +7317,7 @@ sub rdb_primary_run { } } if ( ! test_gen_file( $std_fls_file ) ) { - warn "$My_name: fls file doesn't appear to have been made\n"; + warn "$My_name: fls file doesn't appear to have been made.\n"; } } @@ -7125,18 +7366,21 @@ sub rdb_primary_run { $return = 0; } # Summarize issues that may have escaped notice: - my @warnings = (); + @primary_warning_summary = (); if ($bad_reference) { - push @warnings, "Latex failed to resolve $bad_reference reference(s)"; + push @primary_warning_summary, + "Latex failed to resolve $bad_reference reference(s)"; } if ($mult_defined) { - push @warnings, "Latex found $mult_defined multiply defined reference(s)"; + push @primary_warning_summary, + "Latex found $mult_defined multiply defined reference(s)"; } if ($bad_citation) { - push @warnings, "Latex failed to resolve $bad_citation citation(s)"; + push @primary_warning_summary, + "Latex failed to resolve $bad_citation citation(s)"; } - if ($#warnings > -1) { - show_array( "$My_name: Summary of warnings:", @warnings ); + if ( $diagnostics && ($#primary_warning_summary > -1) ) { + show_array( "$My_name: Summary of warnings:", @primary_warning_summary ); } return $return; } #END rdb_primary_run @@ -8506,7 +8750,7 @@ sub fileparseA { $path = ''; } return ($base_name, $path, $ext); - } +} #************************************************************ @@ -8517,7 +8761,7 @@ sub fileparseB { if ($#_ > 0 ) { $pattern = $_[1]; } my ($base_name, $path, $ext) = fileparse( $given, $pattern ); return ($base_name, $path, $ext); - } +} #************************************************************ @@ -8846,9 +9090,10 @@ sub find_process_id { sub cache_good_cwd { # Set cached value of cwd to current cwd. - # Under cygwin, the cwd is converted to a native MSWin path so + # Under cygwin, the cached value is converted to a native MSWin path so # that the result can be used for input to MSWin programs as well - # as cygwin programs. + # as cygwin programs. + # Similarly for msys. my $cwd = cwd(); if ( $^O eq "cygwin" ) { my $cmd = "cygpath -w \"$cwd\""; @@ -8866,14 +9111,18 @@ sub cache_good_cwd { " '$Win_cwd'\n"; } } + elsif ( $^O eq "msys" ) { + $cwd =~ s[^/([a-z])/][\u$1:/]; + } $cache{cwd} = $cwd; } # END cache_good_cwd #============================================ sub good_cwd { - # Return cwd, but under cygwin, convert to MSWin path. - # Use cached result + # Return cwd, but under cygwin (or ...), convert to MSWin path. + # Use cached result, to save a possible expensive computation (running + # of extenal program under cygwin). return $cache{cwd}; } # END good_cwd diff --git a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl index a352d25b5e2..e3fae9aa312 100755 --- a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl +++ b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl @@ -1,12 +1,12 @@ #!/usr/bin/env perl -# $Id: tlmgr.pl 47763 2018-05-18 23:47:18Z preining $ +# $Id: tlmgr.pl 47823 2018-05-24 03:08:27Z preining $ # # Copyright 2008-2018 Norbert Preining # This file is licensed under the GNU General Public License version 2 # or any later version. -my $svnrev = '$Revision: 47763 $'; -my $datrev = '$Date: 2018-05-19 01:47:18 +0200 (Sat, 19 May 2018) $'; +my $svnrev = '$Revision: 47823 $'; +my $datrev = '$Date: 2018-05-24 05:08:27 +0200 (Thu, 24 May 2018) $'; my $tlmgrrevision; my $tlmgrversion; my $prg; @@ -1091,8 +1091,7 @@ sub backup_and_remove_package { return($F_WARNING); } if ($opts{"backup"}) { - my ($compressor, $compressorextension) = TeXLive::TLUtils::setup_compressor(); - $tlp->make_container($compressor, $localtlpdb->root, + $tlp->make_container($::progs{'compressor'}, $localtlpdb->root, $opts{"backupdir"}, "${pkg}.r" . $tlp->revision, $tlp->relocated); @@ -2142,12 +2141,12 @@ sub action_backup { clear_old_backups ($pkg, $opts{"backupdir"}, $opts{"clean"}, $opts{"dry-run"}, 1); } else { # for now default to xz and allow overriding with env var - my ($compressor, $compressorextension) = TeXLive::TLUtils::setup_compressor(); + my $compressorextension = $CompressorExtension{$::progs{'compressor'}}; my $tlp = $localtlpdb->get_package($pkg); info("saving current status of $pkg to $opts{'backupdir'}/${pkg}.r" . $tlp->revision . ".tar.$compressorextension\n"); if (!$opts{"dry-run"}) { - $tlp->make_container($compressor, $localtlpdb->root, + $tlp->make_container($::progs{'compressor'}, $localtlpdb->root, $opts{"backupdir"}, "${pkg}.r" . $tlp->revision); } } @@ -2269,24 +2268,28 @@ sub write_w32_updater { tlwarn("$prg: Creation of backup container of $pkg failed.\n"); return 1; # backup failed? abort } + my $decompressor = $::progs{$DecompressorProgram{$DefaultCompressorFormat}}; + my $compressorextension = $CompressorExtension{$DefaultCompressorFormat}; + my @decompressorArgs = @{$DecompressorArgs{$DefaultCompressorFormat}}; foreach my $pkg_part (@pkg_parts) { if ($media eq 'local_compressed') { - copy("$repo/$pkg_part.tar.xz", "$temp"); + copy("$repo/$pkg_part.tar.$compressorextension", "$temp"); } else { # net - TeXLive::TLUtils::download_file("$repo/$pkg_part.tar.xz", "$temp/$pkg_part.tar.xz"); + TeXLive::TLUtils::download_file("$repo/$pkg_part.tar.$compressorextension", + "$temp/$pkg_part.tar.$compressorextension"); } # now we should have the file present - if (!-r "$temp/$pkg_part.tar.xz") { - tlwarn("$prg: Couldn't get $pkg_part.tar.xz, that is bad\n"); + if (!-r "$temp/$pkg_part.tar.$compressorextension") { + tlwarn("$prg: Couldn't get $pkg_part.tar.$compressorextension, that is bad\n"); return 1; # abort } # unpack xz archive - my $sysret = system("$::progs{'xzdec'} < \"$temp/$pkg_part.tar.xz\" > \"$temp/$pkg_part.tar\""); + my $sysret = system("$decompressor @decompressorArgs < \"$temp/$pkg_part.tar.xz\" > \"$temp/$pkg_part.tar\""); if ($sysret) { - tlwarn("$prg: Couldn't unpack $pkg_part.tar.xz\n"); + tlwarn("$prg: Couldn't unpack $pkg_part.tar.$compressorextension\n"); return 1; # unpack failed? abort } - unlink("$temp/$pkg_part.tar.xz"); # we don't need that archive anymore + unlink("$temp/$pkg_part.tar.$compressorextension"); # we don't need that archive anymore } } @@ -2824,7 +2827,7 @@ sub action_update { $mediatlp = $remotetlpdb->get_package($pkg); } if (!defined($mediatlp)) { - debug("$pkg cannot be found in $location\n"); + ddebug("$pkg cannot be found in $location\n"); next; } my $rctanvers = $mediatlp->cataloguedata->{'version'}; @@ -3178,8 +3181,8 @@ sub action_update { } if ($opts{"backup"} && !$opts{"dry-run"}) { - my ($compressor, $compressorextension) = TeXLive::TLUtils::setup_compressor(); - $tlp->make_container($compressor, $root, + my $compressorextension = $CompressorExtension{$::progs{'compressor'}}; + $tlp->make_container($::progs{'compressor'}, $root, $opts{"backupdir"}, "${pkg}.r" . $tlp->revision, $tlp->relocated); $unwind_package = @@ -4431,9 +4434,9 @@ sub action_repository { return ($F_ERROR); } # check if it is either url or absolute path - if (($p !~ m!^(https?|ftp)://!i) && + if (($p !~ m!^(https?|ftp)://!i) && ($p !~ m!$TeXLive::TLUtils::SshURIRegex!) && !File::Spec->file_name_is_absolute($p)) { - tlwarn("$prg: neither https?/ftp URL nor absolute path, no action: $p\n"); + tlwarn("$prg: neither https?/ftp/ssh/scp/file URI nor absolute path, no action: $p\n"); return ($F_ERROR); } my $t = shift @ARGV; @@ -6547,7 +6550,8 @@ sub init_local_db { # we normalize the path only if it is # - a url starting with neither http or ftp # - if we are on Windows, it does not start with Drive:[\/] - if (! ( $location =~ m!^(https?|ftp)://!i || + if (! ( $location =~ m!^(https?|ftp)://!i || + $location =~ m!$TeXLive::TLUtils::SshURIRegex!i || (win32() && (!(-e $location) || ($location =~ m!^.:[\\/]!) ) ) ) ) { # seems to be a local path, try to normalize it my $testloc = abs_path($location); @@ -8313,7 +8317,7 @@ platform instead of auto detection. C switches TeX Live to auto detection mode for platform. -Platform detection is needed to select the proper C, C and +Platform detection is needed to select the proper C and C binaries that are shipped with TeX Live. C is a synonym for C. @@ -9533,7 +9537,7 @@ This script and its documentation were written for the TeX Live distribution (L) and both are licensed under the GNU General Public License Version 2 or later. -$Id: tlmgr.pl 47763 2018-05-18 23:47:18Z preining $ +$Id: tlmgr.pl 47823 2018-05-24 03:08:27Z preining $ =cut # to remake HTML version: pod2html --cachedir=/tmp tlmgr.pl >/tmp/tlmgr.html -- cgit v1.2.3