From 453e4a6601ed7f8a08029211434be8e58fc452a9 Mon Sep 17 00:00:00 2001 From: Peter Breitenlohner Date: Fri, 20 Mar 2009 07:57:39 +0000 Subject: new build system git-svn-id: svn://tug.org/texlive/trunk@12449 c570f23f-e606-0410-a88d-b1316a301751 --- Build/source/texk/Makefile.in | 761 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 671 insertions(+), 90 deletions(-) (limited to 'Build/source/texk/Makefile.in') diff --git a/Build/source/texk/Makefile.in b/Build/source/texk/Makefile.in index 48bff423245..195f9d3f62b 100644 --- a/Build/source/texk/Makefile.in +++ b/Build/source/texk/Makefile.in @@ -1,91 +1,672 @@ +# Makefile.in generated by automake 1.10.2 from Makefile.am. # @configure_input@ -# Top-level Makefile for kpathsea-using programs. - -# Package subdirectories, the library, and all subdirectories. -ESUBDIRS=@ESUBDIRS@ - -programs = web2c $(ESUBDIRS) -kpathsea_dir = kpathsea -all_dirs = $(programs) $(kpathsea_dir) - -kpse_include make/paths.mk -kpse_include make/makevars.mk - -# It's too bad we have to pass all these down, but I see no alternative, -# if we are to propagate changes at the top level. -# XMAKEARGS is for the user to override. -makeargs = $(MFLAGS) CC='$(CC)' CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS)' $(makevars) $(XMAKEARGS) -installargs = $(makeargs) - -# Not everything from common.mk is relevant to this top-level -# Makefile, but most of it is, and it doesn't seem worth separating the -# compilation-specific stuff. -kpse_include make/common.mk - -# Get more of the default setup. -kpse_include make/programs.mk - -# kpathsea is not a sibling, it's a child. -kpathsea_parent = . - -# Make the library before the programs. -# Always make all, rather than $@, because automake-generated Makefiles, -# among others, do not have a default target. -# Use if ... rather than || or && because Ultrix sh exits for -# no good reason with the latter. -default all: do-kpathsea - for d in $(programs); do if test -f $$d/Makefile; then \ - (cd $$d && $(MAKE) $(makeargs) all) || exit 1; else true; fi; done - -install install-data install-exec: - for d in kpathsea $(programs); do if test -f $$d/Makefile; then \ - (cd $$d && $(MAKE) $(installargs) $@) || exit 1; else true; fi; done - -# Other standard targets for everything. -uninstall uninstall-exec uninstall-data \ -mostlyclean clean realclean extraclean configclean \ -info dvi check depend:: - for d in $(all_dirs); do if test -f $$d/Makefile; then \ - (cd $$d && $(MAKE) $(makeargs) $@) || exit 1; else true; fi; done - -distclean:: - rm -rf conftest* - -distclean:: - for d in $(all_dirs); do if test -f $$d/Makefile; then \ - (cd $$d && $(MAKE) $(makeargs) $@) || exit 1; else true; fi; done - -distclean realclean:: - rm -f Makefile Makefile.aux config.status config.cache config.log libtool - -# Unconditionally remake the library, since we don't want to write out -# the dependencies here. -do-kpathsea: - cd $(kpathsea_dir) && $(MAKE) $(makeargs) - -# Targets that only apply to web2c. -triptrap trip trap mptrap \ -formats fmts bases mems \ -install-formats install-fmts install-bases install-mems \ -install-links c-sources: do-kpathsea - cd web2c && $(MAKE) $(makeargs) $@ - -@MAINT@ac_dir = $(srcdir)/etc/autoconf -@MAINT@autoconf = $(ac_dir)/acspecific.m4 $(ac_dir)/acgeneral.m4 $(ac_dir)/acsite.m4 -@MAINT@configure_in = $(srcdir)/configure.in -@MAINT@$(srcdir)/configure: $(configure_in) $(srcdir)/withenable.ac $(autoconf) -@MAINT@ cd $(srcdir) && $(srcdir)/autoconf2.13 -m $(ac_dir) -@MAINT@ -@MAINT@# And make sure that --enable-maintainer-mode is used if configure is -@MAINT@# called from the makefiles. We do not try to do this through the -@MAINT@# cache, lest the option sneaks into a global cache file. -@MAINT@enablemaintflag = --enable-maintainer-mode - -config.status: $(srcdir)/configure - $(SHELL) $(srcdir)/configure --no-create --verbose $(enablemaintflag) - -Makefile: $(srcdir)/Makefile.in config.status - $(SHELL) config.status - -TAGS: - find $(srcdir) \( -name '*.[cCfFhilsy]' -o -name '*.el' \) | etags - + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = README $(am__configure_deps) \ + $(srcdir)/../build-aux/install-sh \ + $(srcdir)/../build-aux/missing $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/configure \ + ../build-aux/config.guess ../build-aux/config.sub \ + ../build-aux/depcomp ../build-aux/install-sh \ + ../build-aux/ltmain.sh ../build-aux/missing \ + ../build-aux/texinfo.tex ../build-aux/ylwrap ChangeLog +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/../m4/kpse-pkgs.m4 \ + $(top_srcdir)/../m4/kpse-setup.m4 \ + $(top_srcdir)/../m4/kpse-web2c.m4 \ + $(top_srcdir)/../ac/withenable.ac \ + $(top_srcdir)/../utils/ac/withenable.ac \ + $(top_srcdir)/../utils/dialog/ac/withenable.ac \ + $(top_srcdir)/../utils/pdfopen/ac/withenable.ac \ + $(top_srcdir)/../utils/ps2eps/ac/withenable.ac \ + $(top_srcdir)/../utils/psutils/ac/withenable.ac \ + $(top_srcdir)/../utils/t1utils/ac/withenable.ac \ + $(top_srcdir)/../utils/tpic2pdftex/ac/withenable.ac \ + $(top_srcdir)/../utils/vlna/ac/withenable.ac \ + $(top_srcdir)/../texk/ac/withenable.ac \ + $(top_srcdir)/../texk/web2c/ac/withenable.ac \ + $(top_srcdir)/../texk/web2c/ac/web2c.ac \ + $(top_srcdir)/../texk/one/ac/withenable.ac \ + $(top_srcdir)/../texk/afm2pl/ac/withenable.ac \ + $(top_srcdir)/../texk/bibtex8/ac/withenable.ac \ + $(top_srcdir)/../texk/cjkutils/ac/withenable.ac \ + $(top_srcdir)/../texk/detex/ac/withenable.ac \ + $(top_srcdir)/../texk/devnag/ac/withenable.ac \ + $(top_srcdir)/../texk/dtl/ac/withenable.ac \ + $(top_srcdir)/../texk/dvi2tty/ac/withenable.ac \ + $(top_srcdir)/../texk/dvidvi/ac/withenable.ac \ + $(top_srcdir)/../texk/dviljk/ac/withenable.ac \ + $(top_srcdir)/../texk/dvipdfm/ac/withenable.ac \ + $(top_srcdir)/../texk/dvipdfmx/ac/withenable.ac \ + $(top_srcdir)/../texk/dvipos/ac/withenable.ac \ + $(top_srcdir)/../texk/dvipsk/ac/withenable.ac \ + $(top_srcdir)/../texk/gsftopk/ac/withenable.ac \ + $(top_srcdir)/../texk/lacheck/ac/withenable.ac \ + $(top_srcdir)/../texk/lcdf-typetools/ac/withenable.ac \ + $(top_srcdir)/../texk/lcdf-typetools/ac/lcdf-typetools.ac \ + $(top_srcdir)/../texk/makeindexk/ac/withenable.ac \ + $(top_srcdir)/../texk/musixflx/ac/withenable.ac \ + $(top_srcdir)/../texk/ps2pkm/ac/withenable.ac \ + $(top_srcdir)/../texk/seetexk/ac/withenable.ac \ + $(top_srcdir)/../texk/tex4htk/ac/withenable.ac \ + $(top_srcdir)/../texk/ttf2pk/ac/withenable.ac \ + $(top_srcdir)/../texk/ttfdump/ac/withenable.ac \ + $(top_srcdir)/../texk/xdv2pdf/ac/withenable.ac \ + $(top_srcdir)/../texk/xdvipdfmx/ac/withenable.ac \ + $(top_srcdir)/../texk/kpathsea/ac/withenable.ac \ + $(top_srcdir)/../texk/kpathsea/ac/web2c.ac \ + $(top_srcdir)/../libs/ac/withenable.ac \ + $(top_srcdir)/../libs/teckit/ac/withenable.ac \ + $(top_srcdir)/../libs/graphite/ac/withenable.ac \ + $(top_srcdir)/../libs/xpdf/ac/withenable.ac \ + $(top_srcdir)/../libs/gd/ac/withenable.ac \ + $(top_srcdir)/../libs/freetype2/ac/withenable.ac \ + $(top_srcdir)/../libs/freetype/ac/withenable.ac \ + $(top_srcdir)/../libs/t1lib/ac/withenable.ac \ + $(top_srcdir)/../libs/obsdcompat/ac/withenable.ac \ + $(top_srcdir)/../libs/libpng/ac/withenable.ac \ + $(top_srcdir)/../libs/zlib/ac/withenable.ac \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +DATA = $(noinst_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DIST_SUBTEXK = @DIST_SUBTEXK@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +SUBTEXK = @SUBTEXK@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I ../m4 +SUBDIRS = dummy . $(SUBTEXK) +DIST_SUBDIRS = dummy $(DIST_SUBTEXK) +EXTRA_DIST = README.orig +SUBTEXK_AUX = subtexkdir-configure subtexkdir-conf.args +noinst_DATA = $(SUBTEXK_AUX) +DISTCLEANFILES = $(noinst_DATA) +all: all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) all-local +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am all-local am--refresh check check-am clean \ + clean-generic ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ + distclean distclean-generic distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-recursive uninstall uninstall-am + + +all-local: subtexk + +.PHONY: subtexk + +subtexk: $(noinst_DATA) + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + list='$(DIST_SUBTEXK)'; for subtexk in $$list; do \ + if test ! -f $$subtexk/Makefile; then \ + test -d $$subtexk || $(MKDIR_P) $$subtexk; \ + cmd=`cat $(SUBTEXK_AUX) | sed "s,SUBTEXKDIR,$$subtexk,g"`; \ + case " $(SUBTEXK) " in \ + *" $$subtexk "*) skip=;; \ + *) skip=' --disable-build';; \ + esac; \ + (cd $$subtexk && echo "=== configuring in $$subtexk (`pwd`)" && \ + echo "make: running $(SHELL) $$cmd$$skip" && \ + eval $(SHELL) $$cmd$$skip) && \ + if test "x$$skip" = x; then \ + echo "Making all in $$subtexk" && \ + (cd $$subtexk && $(MAKE) $(AM_MAKEFLAGS) all); \ + fi || eval $$failcom; \ + fi; \ + done; test -z "$$fail" + +subtexkdir-configure: + @echo "make in ./dummy failed to create the file $@" + exit 1 + +subtexkdir-conf.args: + @echo "configure in ./dummy failed to create the file $@" + exit 1 +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -- cgit v1.2.3