From c6101f91d071883b48b1b4b51e5eba0f36d9a78d Mon Sep 17 00:00:00 2001 From: Denis Bitouzé Date: Thu, 25 Feb 2021 18:23:07 +0000 Subject: French translation for tlmgr updated git-svn-id: svn://tug.org/texlive/trunk@57912 c570f23f-e606-0410-a88d-b1316a301751 --- Build/source/Makefile.in | 1097 ---------------------------------------------- 1 file changed, 1097 deletions(-) delete mode 100644 Build/source/Makefile.in (limited to 'Build/source/Makefile.in') diff --git a/Build/source/Makefile.in b/Build/source/Makefile.in deleted file mode 100644 index 092f9a43de9..00000000000 --- a/Build/source/Makefile.in +++ /dev/null @@ -1,1097 +0,0 @@ -# Makefile.in generated by automake 1.16.3 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994-2020 Free Software Foundation, Inc. - -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ -VPATH = @srcdir@ -am__is_gnu_make = { \ - if test -z '$(MAKELEVEL)'; then \ - false; \ - elif test -n '$(MAKE_HOST)'; then \ - true; \ - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ - true; \ - else \ - false; \ - fi; \ -} -am__make_running_with_option = \ - case $${target_option-} in \ - ?) ;; \ - *) echo "am__make_running_with_option: internal error: invalid" \ - "target option '$${target_option-}' specified" >&2; \ - exit 1;; \ - esac; \ - has_opt=no; \ - sane_makeflags=$$MAKEFLAGS; \ - if $(am__is_gnu_make); then \ - sane_makeflags=$$MFLAGS; \ - else \ - case $$MAKEFLAGS in \ - *\\[\ \ ]*) \ - bs=\\; \ - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ - esac; \ - fi; \ - skip_next=no; \ - strip_trailopt () \ - { \ - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ - }; \ - for flg in $$sane_makeflags; do \ - test $$skip_next = yes && { skip_next=no; continue; }; \ - case $$flg in \ - *=*|--*) continue;; \ - -*I) strip_trailopt 'I'; skip_next=yes;; \ - -*I?*) strip_trailopt 'I';; \ - -*O) strip_trailopt 'O'; skip_next=yes;; \ - -*O?*) strip_trailopt 'O';; \ - -*l) strip_trailopt 'l'; skip_next=yes;; \ - -*l?*) strip_trailopt 'l';; \ - -[dEDm]) skip_next=yes;; \ - -[JT]) skip_next=yes;; \ - esac; \ - case $$flg in \ - *$$target_option*) has_opt=yes; break;; \ - esac; \ - done; \ - test $$has_opt = yes -am__make_dryrun = (target_option=n; $(am__make_running_with_option)) -am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = . -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ - $(top_srcdir)/m4/kpse-common.m4 \ - $(top_srcdir)/m4/kpse-cxx-hack.m4 \ - $(top_srcdir)/m4/kpse-freetype2-flags.m4 \ - $(top_srcdir)/m4/kpse-gd-flags.m4 \ - $(top_srcdir)/m4/kpse-gmp-flags.m4 \ - $(top_srcdir)/m4/kpse-graphite2-flags.m4 \ - $(top_srcdir)/m4/kpse-harfbuzz-flags.m4 \ - $(top_srcdir)/m4/kpse-icu-flags.m4 \ - $(top_srcdir)/m4/kpse-kpathsea-flags.m4 \ - $(top_srcdir)/m4/kpse-libpaper-flags.m4 \ - $(top_srcdir)/m4/kpse-libpng-flags.m4 \ - $(top_srcdir)/m4/kpse-lt-hack.m4 \ - $(top_srcdir)/m4/kpse-mktex.m4 \ - $(top_srcdir)/m4/kpse-mpfr-flags.m4 \ - $(top_srcdir)/m4/kpse-options.m4 \ - $(top_srcdir)/m4/kpse-pixman-flags.m4 \ - $(top_srcdir)/m4/kpse-pkgs.m4 \ - $(top_srcdir)/m4/kpse-pplib-flags.m4 \ - $(top_srcdir)/m4/kpse-ptexenc-flags.m4 \ - $(top_srcdir)/m4/kpse-setup.m4 \ - $(top_srcdir)/m4/kpse-teckit-flags.m4 \ - $(top_srcdir)/m4/kpse-warnings.m4 \ - $(top_srcdir)/m4/kpse-web2c.m4 $(top_srcdir)/m4/kpse-win32.m4 \ - $(top_srcdir)/m4/kpse-xpdf-flags.m4 \ - $(top_srcdir)/m4/kpse-zlib-flags.m4 \ - $(top_srcdir)/m4/kpse-zziplib-flags.m4 \ - $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ - $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ - $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \ - $(top_srcdir)/version.ac \ - $(top_srcdir)/utils/autosp/ac/withenable.ac \ - $(top_srcdir)/utils/axodraw2/ac/withenable.ac \ - $(top_srcdir)/utils/devnag/ac/withenable.ac \ - $(top_srcdir)/utils/lacheck/ac/withenable.ac \ - $(top_srcdir)/utils/m-tx/ac/withenable.ac \ - $(top_srcdir)/utils/pmx/ac/withenable.ac \ - $(top_srcdir)/utils/ps2eps/ac/withenable.ac \ - $(top_srcdir)/utils/t1utils/ac/withenable.ac \ - $(top_srcdir)/utils/texdoctk/ac/withenable.ac \ - $(top_srcdir)/utils/tpic2pdftex/ac/withenable.ac \ - $(top_srcdir)/utils/vlna/ac/withenable.ac \ - $(top_srcdir)/utils/xindy/ac/withenable.ac \ - $(top_srcdir)/utils/xindy/ac/xindy.ac \ - $(top_srcdir)/utils/xindy/ac/clisp.ac \ - $(top_srcdir)/utils/xml2pmx/ac/withenable.ac \ - $(top_srcdir)/utils/xpdfopen/ac/withenable.ac \ - $(top_srcdir)/texk/web2c/ac/withenable.ac \ - $(top_srcdir)/texk/web2c/ac/web2c.ac \ - $(top_srcdir)/texk/afm2pl/ac/withenable.ac \ - $(top_srcdir)/texk/bibtex-x/ac/withenable.ac \ - $(top_srcdir)/texk/bibtex-x/ac/bibtex-x.ac \ - $(top_srcdir)/texk/chktex/ac/withenable.ac \ - $(top_srcdir)/texk/cjkutils/ac/withenable.ac \ - $(top_srcdir)/texk/detex/ac/withenable.ac \ - $(top_srcdir)/texk/dtl/ac/withenable.ac \ - $(top_srcdir)/texk/dvi2tty/ac/withenable.ac \ - $(top_srcdir)/texk/dvidvi/ac/withenable.ac \ - $(top_srcdir)/texk/dviljk/ac/withenable.ac \ - $(top_srcdir)/texk/dviout-util/ac/withenable.ac \ - $(top_srcdir)/texk/dvipdfm-x/ac/withenable.ac \ - $(top_srcdir)/texk/dvipng/ac/withenable.ac \ - $(top_srcdir)/texk/dvipng/ac/dvipng.ac \ - $(top_srcdir)/texk/dvipos/ac/withenable.ac \ - $(top_srcdir)/texk/dvipsk/ac/withenable.ac \ - $(top_srcdir)/texk/dvisvgm/ac/withenable.ac \ - $(top_srcdir)/texk/gregorio/ac/withenable.ac \ - $(top_srcdir)/texk/gsftopk/ac/withenable.ac \ - $(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \ - $(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \ - $(top_srcdir)/texk/makeindexk/ac/withenable.ac \ - $(top_srcdir)/texk/makejvf/ac/withenable.ac \ - $(top_srcdir)/texk/mendexk/ac/withenable.ac \ - $(top_srcdir)/texk/musixtnt/ac/withenable.ac \ - $(top_srcdir)/texk/ps2pk/ac/withenable.ac \ - $(top_srcdir)/texk/psutils/ac/withenable.ac \ - $(top_srcdir)/texk/seetexk/ac/withenable.ac \ - $(top_srcdir)/texk/tex4htk/ac/withenable.ac \ - $(top_srcdir)/texk/ttf2pk2/ac/withenable.ac \ - $(top_srcdir)/texk/ttfdump/ac/withenable.ac \ - $(top_srcdir)/texk/upmendex/ac/withenable.ac \ - $(top_srcdir)/texk/xdvik/ac/withenable.ac \ - $(top_srcdir)/texk/xdvik/ac/xdvik.ac \ - $(top_srcdir)/texk/texlive/ac/withenable.ac \ - $(top_srcdir)/texk/texlive/ac/texlive.ac \ - $(top_srcdir)/libs/pplib/ac/withenable.ac \ - $(top_srcdir)/libs/harfbuzz/ac/withenable.ac \ - $(top_srcdir)/libs/icu/ac/withenable.ac \ - $(top_srcdir)/libs/teckit/ac/withenable.ac \ - $(top_srcdir)/libs/graphite2/ac/withenable.ac \ - $(top_srcdir)/libs/zziplib/ac/withenable.ac \ - $(top_srcdir)/libs/xpdf/ac/withenable.ac \ - $(top_srcdir)/libs/mpfr/ac/withenable.ac \ - $(top_srcdir)/libs/gmp/ac/withenable.ac \ - $(top_srcdir)/libs/cairo/ac/withenable.ac \ - $(top_srcdir)/libs/pixman/ac/withenable.ac \ - $(top_srcdir)/libs/gd/ac/withenable.ac \ - $(top_srcdir)/libs/freetype2/ac/withenable.ac \ - $(top_srcdir)/libs/libpng/ac/withenable.ac \ - $(top_srcdir)/libs/libpaper/ac/withenable.ac \ - $(top_srcdir)/libs/luajit/ac/withenable.ac \ - $(top_srcdir)/libs/lua53/ac/withenable.ac \ - $(top_srcdir)/libs/zlib/ac/withenable.ac \ - $(top_srcdir)/texk/ptexenc/ac/withenable.ac \ - $(top_srcdir)/texk/kpathsea/ac/withenable.ac \ - $(top_srcdir)/texk/kpathsea/ac/mktex.ac \ - $(top_srcdir)/texk/kpathsea/ac/kpathsea.ac \ - $(top_srcdir)/texk/ptexenc/ac/ptexenc.ac \ - $(top_srcdir)/libs/zlib/ac/zlib.ac \ - $(top_srcdir)/libs/libpaper/ac/libpaper.ac \ - $(top_srcdir)/libs/libpng/ac/libpng.ac \ - $(top_srcdir)/libs/freetype2/ac/freetype2.ac \ - $(top_srcdir)/libs/gd/ac/gd.ac \ - $(top_srcdir)/libs/pixman/ac/pixman.ac \ - $(top_srcdir)/libs/cairo/ac/cairo.ac \ - $(top_srcdir)/libs/gmp/ac/gmp.ac \ - $(top_srcdir)/libs/mpfr/ac/mpfr.ac \ - $(top_srcdir)/libs/xpdf/ac/xpdf.ac \ - $(top_srcdir)/libs/zziplib/ac/zziplib.ac \ - $(top_srcdir)/libs/graphite2/ac/graphite2.ac \ - $(top_srcdir)/libs/teckit/ac/teckit.ac \ - $(top_srcdir)/libs/icu/ac/icu.ac \ - $(top_srcdir)/libs/harfbuzz/ac/harfbuzz.ac \ - $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ - $(am__configure_deps) $(am__DIST_COMMON) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -AM_V_P = $(am__v_P_@AM_V@) -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) -am__v_P_0 = false -am__v_P_1 = : -AM_V_GEN = $(am__v_GEN_@AM_V@) -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) -am__v_GEN_0 = @echo " GEN " $@; -am__v_GEN_1 = -AM_V_at = $(am__v_at_@AM_V@) -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) -am__v_at_0 = @ -am__v_at_1 = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ - ctags-recursive dvi-recursive html-recursive info-recursive \ - install-data-recursive install-dvi-recursive \ - install-exec-recursive install-html-recursive \ - install-info-recursive install-pdf-recursive \ - install-ps-recursive install-recursive installcheck-recursive \ - installdirs-recursive pdf-recursive ps-recursive \ - tags-recursive uninstall-recursive -am__can_run_installinfo = \ - case $$AM_UPDATE_INFO_DIR in \ - n|no|NO) false;; \ - *) (install-info --version) >/dev/null 2>&1;; \ - esac -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -am__recursive_targets = \ - $(RECURSIVE_TARGETS) \ - $(RECURSIVE_CLEAN_TARGETS) \ - $(am__extra_recursive_targets) -AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir distdir-am dist dist-all distcheck -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) -# Read a list of newline-separated strings from the standard input, -# and print each of them once, without duplicates. Input order is -# *not* preserved. -am__uniquify_input = $(AWK) '\ - BEGIN { nonempty = 0; } \ - { items[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in items) print i; }; } \ -' -# Make sure the list of sources is unique. This is necessary because, -# e.g., the same source file might be shared among _SOURCES variables -# for different programs/libraries. -am__define_uniq_tagged_files = \ - list='$(am__tagged_files)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | $(am__uniquify_input)` -ETAGS = etags -CTAGS = ctags -CSCOPE = cscope -am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/am/dist_hook.am \ - $(srcdir)/am/recurse.am $(top_srcdir)/build-aux/compile \ - $(top_srcdir)/build-aux/config.guess \ - $(top_srcdir)/build-aux/config.sub \ - $(top_srcdir)/build-aux/install-sh \ - $(top_srcdir)/build-aux/ltmain.sh \ - $(top_srcdir)/build-aux/missing ChangeLog README \ - build-aux/ar-lib build-aux/compile build-aux/config.guess \ - build-aux/config.sub build-aux/depcomp build-aux/install-sh \ - build-aux/ltmain.sh build-aux/missing build-aux/texinfo.tex \ - build-aux/ylwrap -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - if test -d "$(distdir)"; then \ - find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -rf "$(distdir)" \ - || { sleep 5 && rm -rf "$(distdir)"; }; \ - else :; fi -am__post_remove_distdir = $(am__remove_distdir) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -GZIP_ENV = --best -DIST_ARCHIVES = $(distdir).tar.xz -DIST_TARGETS = dist-xz -# Exists only to be overridden by the user if desired. -AM_DISTCHECK_DVI_TARGET = dvi -am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ - | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' -ACLOCAL = @ACLOCAL@ --force -AMTAR = @AMTAR@ -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ -AR = @AR@ -AS = @AS@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CONF_SUBDIRS = @CONF_SUBDIRS@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CXX = @CXX@ -CXXCPP = @CXXCPP@ -CXXDEPMODE = @CXXDEPMODE@ -CXXFLAGS = @CXXFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -DLLTOOL = @DLLTOOL@ -DSYMUTIL = @DSYMUTIL@ -DUMPBIN = @DUMPBIN@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -FGREP = @FGREP@ -FT2_CONFIG = @FT2_CONFIG@ -GREP = @GREP@ -ICU_CONFIG = @ICU_CONFIG@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LD = @LD@ -LDFLAGS = @LDFLAGS@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LIBTOOL = @LIBTOOL@ -LIPO = @LIPO@ -LN_S = @LN_S@ -LTLIBOBJS = @LTLIBOBJS@ -LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MAKE_SUBDIRS = @MAKE_SUBDIRS@ -MANIFEST_TOOL = @MANIFEST_TOOL@ -MKDIR_P = @MKDIR_P@ -NM = @NM@ -NMEDIT = @NMEDIT@ -OBJDUMP = @OBJDUMP@ -OBJEXT = @OBJEXT@ -OTOOL = @OTOOL@ -OTOOL64 = @OTOOL64@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PKG_CONFIG = @PKG_CONFIG@ -RANLIB = @RANLIB@ -SED = @SED@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -WARNING_CFLAGS = @WARNING_CFLAGS@ -WARNING_CXXFLAGS = @WARNING_CXXFLAGS@ -XMKMF = @XMKMF@ -X_CFLAGS = @X_CFLAGS@ -X_EXTRA_LIBS = @X_EXTRA_LIBS@ -X_LIBS = @X_LIBS@ -X_PRE_LIBS = @X_PRE_LIBS@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_AR = @ac_ct_AR@ -ac_ct_CC = @ac_ct_CC@ -ac_ct_CXX = @ac_ct_CXX@ -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -subdirs = @subdirs@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -AM_DISTCHECK_CONFIGURE_FLAGS = -C -distuninstallcheck_listfiles = find . -type f -o -type l -print -distcleancheck_listfiles = find . -type f -o -type l -print -EXTRA_DIST = \ - Build \ - README.0overview \ - README.1prerequisites \ - README.2building \ - README.3installing \ - README.4layout \ - README.5configure \ - README.6cross \ - README.7coding \ - build-aux/README.TL \ - m4/ChangeLog \ - m4/README \ - reautoconf - -NEVER_DIST = `find . $(NEVER_NAMES)` -NEVER_NAMES = -name .svn -NEVER_NAMES_SUB = -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)' -NEVER_NAMES_LT = -o -name .libs -o -name '*.lo' - -# Files not to be distributed -SUBDIRS = . doc $(MAKE_SUBDIRS) libs utils texk -DIST_SUBDIRS = auxdir/auxsub doc $(CONF_SUBDIRS) libs utils texk -recurse_this = -recurse_top = - -# am/recurse.am: Makefile fragment to configure and build subdirs. -# -# Copyright 2017-2020 Karl Berry -# Copyright 2013 Peter Breitenlohner -# You may freely use, modify and/or distribute this file. -# -# Requires $(recurse_this) and $(recurse_top). -# Uses CONF_SUBDIRS and MAKE_SUBDIRS (set by kpse-setup.m4). -# -# For subdirs not required for the current set of configure options -# we append '--disable-build' so they can skip tests that would -# fail because, e.g., some required libraries were not built. -# (By manually testing $enable_build in configure, e.g., dvisvgm/configure.) -# -# Code inspired by automake's way to handle recursive targets. -# -cf_silent = $(cf_silent_@AM_V@) -cf_silent_ = $(cf_silent_@AM_DEFAULT_V@) -cf_silent_0 = --silent -cf_silent_1 = -CONFIG_AUX = $(recurse_top)subsubdir-conf.cmd -# Run texlinks here since the binaries won't be there -# at install-data, and fmtutil.cnf won't be there at install-exec, -# and there is no install-hook or install-local. -texlinks_dir = texk/texlive/tl_support - -# should be harmless to run it, but just in case: -build_info_target = buildinfo -@cross_FALSE@check_target = check - -# Allow for skipping make check if needed. -@cross_TRUE@check_target = skip -all: all-recursive - -.SUFFIXES: -am--refresh: Makefile - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ - $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ - esac; -$(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__empty): - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - $(am__cd) $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -$(am__aclocal_m4_deps): - -mostlyclean-libtool: - -rm -f *.lo - -clean-libtool: - -rm -rf .libs _libs - -distclean-libtool: - -rm -f libtool config.lt - -# This directory's subdirectories are mostly independent; you can cd -# into them and run 'make' without going through this Makefile. -# To change the values of 'make' variables: instead of editing Makefiles, -# (1) if the variable is set in 'config.status', edit 'config.status' -# (which will cause the Makefiles to be regenerated when you run 'make'); -# (2) otherwise, pass the desired values on the 'make' command line. -$(am__recursive_targets): - @fail=; \ - if $(am__make_keepgoing); then \ - failcom='fail=yes'; \ - else \ - failcom='exit 1'; \ - fi; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -ID: $(am__tagged_files) - $(am__define_uniq_tagged_files); mkid -fID $$unique -tags: tags-recursive -TAGS: tags - -tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - $(am__define_uniq_tagged_files); \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: ctags-recursive - -CTAGS: ctags -ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) - $(am__define_uniq_tagged_files); \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" -cscope: cscope.files - test ! -s cscope.files \ - || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) -clean-cscope: - -rm -f cscope.files -cscope.files: clean-cscope cscopelist -cscopelist: cscopelist-recursive - -cscopelist-am: $(am__tagged_files) - list='$(am__tagged_files)'; \ - case "$(srcdir)" in \ - [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ - *) sdir=$(subdir)/$(srcdir) ;; \ - esac; \ - for i in $$list; do \ - if test -f "$$i"; then \ - echo "$(subdir)/$$i"; \ - else \ - echo "$$sdir/$$i"; \ - fi; \ - done >> $(top_builddir)/cscope.files - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -rm -f cscope.out cscope.in.out cscope.po.out cscope.files - -distdir: $(BUILT_SOURCES) - $(MAKE) $(AM_MAKEFLAGS) distdir-am - -distdir-am: $(DISTFILES) - $(am__remove_distdir) - test -d "$(distdir)" || mkdir "$(distdir)" - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - $(am__make_dryrun) \ - || test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$(top_distdir)" distdir="$(distdir)" \ - dist-hook - -test -n "$(am__skip_mode_fix)" \ - || find "$(distdir)" -type d ! -perm -755 \ - -exec chmod u+rwx,go+rx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r "$(distdir)" -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz - $(am__post_remove_distdir) - -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 - $(am__post_remove_distdir) - -dist-lzip: distdir - tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz - $(am__post_remove_distdir) -dist-xz: distdir - tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz - $(am__post_remove_distdir) - -dist-zstd: distdir - tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst - $(am__post_remove_distdir) - -dist-tarZ: distdir - @echo WARNING: "Support for distribution archives compressed with" \ - "legacy program 'compress' is deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__post_remove_distdir) - -dist-shar: distdir - @echo WARNING: "Support for shar distribution archives is" \ - "deprecated." >&2 - @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz - $(am__post_remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__post_remove_distdir) - -dist dist-all: - $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' - $(am__post_remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lz*) \ - lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ - *.tar.xz*) \ - xz -dc $(distdir).tar.xz | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - *.tar.zst*) \ - zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ - esac - chmod -R a-w $(distdir) - chmod u+w $(distdir) - mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst - chmod a-w $(distdir) - test -d $(distdir)/_build || exit 0; \ - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && am__cwd=`pwd` \ - && $(am__cd) $(distdir)/_build/sub \ - && ../../configure \ - $(AM_DISTCHECK_CONFIGURE_FLAGS) \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - --srcdir=../.. --prefix="$$dc_install_base" \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ - && cd "$$am__cwd" \ - || exit 1 - $(am__post_remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @test -n '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: trying to run $@ with an empty' \ - '$$(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - $(am__cd) '$(distuninstallcheck_dir)' || { \ - echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ - exit 1; \ - }; \ - test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am -check: check-recursive -all-am: Makefile all-local -installdirs: installdirs-recursive -installdirs-am: -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - if test -z '$(STRIP)'; then \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - install; \ - else \ - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ - fi -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic clean-libtool mostlyclean-am - -distclean: distclean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-libtool \ - distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - @$(NORMAL_INSTALL) - $(MAKE) $(AM_MAKEFLAGS) install-exec-hook -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic mostlyclean-libtool - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: - -.MAKE: $(am__recursive_targets) install-am install-exec-am \ - install-strip - -.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ - am--refresh check check-am clean clean-cscope clean-generic \ - clean-libtool cscope cscopelist-am ctags ctags-am dist \ - dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ - dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ - distclean-generic distclean-libtool distclean-tags \ - distcleancheck distdir distuninstallcheck dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-exec-hook install-html install-html-am \ - install-info install-info-am install-man install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs installdirs-am \ - maintainer-clean maintainer-clean-generic mostlyclean \ - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ - tags tags-am uninstall uninstall-am - -.PRECIOUS: Makefile - -dist-hook: - cd "$(distdir)" && rm -rf $(NEVER_DIST) - -all-local: recurse - -.PHONY: recurse -recurse: $(CONFIG_AUX) - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - list='$(CONF_SUBDIRS)'; for one_dir in $$list; do \ - if test ! -f $$one_dir/Makefile; then \ - test -d $$one_dir || $(MKDIR_P) $$one_dir; \ - cmd=`cat $(CONFIG_AUX) | sed "s,auxdir/auxsub,$(recurse_this)$$one_dir,g"`; \ - case " $(MAKE_SUBDIRS) " in \ - *" $$one_dir "*) skip=;; \ - *) skip=' --disable-build';; \ - esac; \ - (cd $$one_dir && echo "=== configuring in $$one_dir (`pwd`)" && \ - if $(AM_V_P); then echo "make: running $(SHELL) $$cmd$$skip"; fi && \ - CONFIG_SHELL=$(SHELL) && export CONFIG_SHELL && \ - eval $(SHELL) $$cmd$$skip $(cf_silent) || \ - { echo "=== configuring in $$one_dir failed"; exit 1; }) && \ - if test "x$$skip" = x; then \ - echo "Making all in $$one_dir" && \ - (cd $$one_dir && $(MAKE) $(AM_MAKEFLAGS) all); \ - fi || eval $$failcom; \ - fi; \ - done; test -z "$$fail" - -$(CONFIG_AUX): - @echo "configure in $(recurse_top)auxdir/auxsub failed to create the file $@" - exit 1 - -# This (world) is the default target for the ./Build script in TeX Live. -.PHONY: world -world: all -# Serialize 'make all' and 'make install-strip'. - @echo "top-level make $@: running install-strip..." - $(MAKE) $(AM_MAKEFLAGS) install-strip -# -# Just in case it's not a full checkout. - if test -d "$(texlinks_dir)"; then \ - echo "top-level make $@: making run-texlinks in $(texlinks_dir) ..."; \ - cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks; \ - else :; fi -# - @echo "top-level make $@: running $(check_target)..." - $(MAKE) $(AM_MAKEFLAGS) $(check_target) -# - @echo "top-level make $@ done." - -# create file buildinfo.log in working directory, to record relevant -# information about the build environment. -buildinfo: - -env MAKE="$(MAKE)" LDFLAGS="$(LDFLAGS)" \ - CC="$(CC)" CFLAGS="$(CFLAGS)" \ - CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" \ - OBJCXX="$(OBJCXX)" OBJCXXFLAGS="$(OBJCXXFLAGS)" \ - $(srcdir)/doc/buildinfo.sh >buildinfo.log - -# run buildinfo first. -all-recursive: buildinfo - -install-exec-hook: - @echo "WARNING: make install does not result in a usable TeX!" - @echo " ! The binaries require the myriad support files." - @echo " ! See http://tug.org/texlive/distro.html" - @echo " ! and http://tug.org/texlive/build.html#deploy, for example." -skip: -.PHONY: skip - -# Convenience targets to run texlinks and reautoconf. -.PHONY: texlinks -texlinks: - cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks - -# Special target to run TRIP and TRAP tests and create diffs. -.PHONY: triptrap -triptrap: - cd texk && $(MAKE) $(AM_MAKEFLAGS) $@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: -- cgit v1.2.3