From ad547a6b5986815fda458221149728d9d9ab1d87 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Thu, 25 Feb 2021 19:22:25 +0000 Subject: restore Build,TODO from r57911 git-svn-id: svn://tug.org/texlive/trunk@57915 c570f23f-e606-0410-a88d-b1316a301751 --- Build/source/Makefile.in | 1097 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1097 insertions(+) create mode 100644 Build/source/Makefile.in (limited to 'Build/source/Makefile.in') diff --git a/Build/source/Makefile.in b/Build/source/Makefile.in new file mode 100644 index 00000000000..092f9a43de9 --- /dev/null +++ b/Build/source/Makefile.in @@ -0,0 +1,1097 @@ +# Makefile.in generated by automake 1.16.3 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2020 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/kpse-cairo-flags.m4 \ + $(top_srcdir)/m4/kpse-common.m4 \ + $(top_srcdir)/m4/kpse-cxx-hack.m4 \ + $(top_srcdir)/m4/kpse-freetype2-flags.m4 \ + $(top_srcdir)/m4/kpse-gd-flags.m4 \ + $(top_srcdir)/m4/kpse-gmp-flags.m4 \ + $(top_srcdir)/m4/kpse-graphite2-flags.m4 \ + $(top_srcdir)/m4/kpse-harfbuzz-flags.m4 \ + $(top_srcdir)/m4/kpse-icu-flags.m4 \ + $(top_srcdir)/m4/kpse-kpathsea-flags.m4 \ + $(top_srcdir)/m4/kpse-libpaper-flags.m4 \ + $(top_srcdir)/m4/kpse-libpng-flags.m4 \ + $(top_srcdir)/m4/kpse-lt-hack.m4 \ + $(top_srcdir)/m4/kpse-mktex.m4 \ + $(top_srcdir)/m4/kpse-mpfr-flags.m4 \ + $(top_srcdir)/m4/kpse-options.m4 \ + $(top_srcdir)/m4/kpse-pixman-flags.m4 \ + $(top_srcdir)/m4/kpse-pkgs.m4 \ + $(top_srcdir)/m4/kpse-pplib-flags.m4 \ + $(top_srcdir)/m4/kpse-ptexenc-flags.m4 \ + $(top_srcdir)/m4/kpse-setup.m4 \ + $(top_srcdir)/m4/kpse-teckit-flags.m4 \ + $(top_srcdir)/m4/kpse-warnings.m4 \ + $(top_srcdir)/m4/kpse-web2c.m4 $(top_srcdir)/m4/kpse-win32.m4 \ + $(top_srcdir)/m4/kpse-xpdf-flags.m4 \ + $(top_srcdir)/m4/kpse-zlib-flags.m4 \ + $(top_srcdir)/m4/kpse-zziplib-flags.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/tardate.ac \ + $(top_srcdir)/version.ac \ + $(top_srcdir)/utils/autosp/ac/withenable.ac \ + $(top_srcdir)/utils/axodraw2/ac/withenable.ac \ + $(top_srcdir)/utils/devnag/ac/withenable.ac \ + $(top_srcdir)/utils/lacheck/ac/withenable.ac \ + $(top_srcdir)/utils/m-tx/ac/withenable.ac \ + $(top_srcdir)/utils/pmx/ac/withenable.ac \ + $(top_srcdir)/utils/ps2eps/ac/withenable.ac \ + $(top_srcdir)/utils/t1utils/ac/withenable.ac \ + $(top_srcdir)/utils/texdoctk/ac/withenable.ac \ + $(top_srcdir)/utils/tpic2pdftex/ac/withenable.ac \ + $(top_srcdir)/utils/vlna/ac/withenable.ac \ + $(top_srcdir)/utils/xindy/ac/withenable.ac \ + $(top_srcdir)/utils/xindy/ac/xindy.ac \ + $(top_srcdir)/utils/xindy/ac/clisp.ac \ + $(top_srcdir)/utils/xml2pmx/ac/withenable.ac \ + $(top_srcdir)/utils/xpdfopen/ac/withenable.ac \ + $(top_srcdir)/texk/web2c/ac/withenable.ac \ + $(top_srcdir)/texk/web2c/ac/web2c.ac \ + $(top_srcdir)/texk/afm2pl/ac/withenable.ac \ + $(top_srcdir)/texk/bibtex-x/ac/withenable.ac \ + $(top_srcdir)/texk/bibtex-x/ac/bibtex-x.ac \ + $(top_srcdir)/texk/chktex/ac/withenable.ac \ + $(top_srcdir)/texk/cjkutils/ac/withenable.ac \ + $(top_srcdir)/texk/detex/ac/withenable.ac \ + $(top_srcdir)/texk/dtl/ac/withenable.ac \ + $(top_srcdir)/texk/dvi2tty/ac/withenable.ac \ + $(top_srcdir)/texk/dvidvi/ac/withenable.ac \ + $(top_srcdir)/texk/dviljk/ac/withenable.ac \ + $(top_srcdir)/texk/dviout-util/ac/withenable.ac \ + $(top_srcdir)/texk/dvipdfm-x/ac/withenable.ac \ + $(top_srcdir)/texk/dvipng/ac/withenable.ac \ + $(top_srcdir)/texk/dvipng/ac/dvipng.ac \ + $(top_srcdir)/texk/dvipos/ac/withenable.ac \ + $(top_srcdir)/texk/dvipsk/ac/withenable.ac \ + $(top_srcdir)/texk/dvisvgm/ac/withenable.ac \ + $(top_srcdir)/texk/gregorio/ac/withenable.ac \ + $(top_srcdir)/texk/gsftopk/ac/withenable.ac \ + $(top_srcdir)/texk/lcdf-typetools/ac/withenable.ac \ + $(top_srcdir)/texk/lcdf-typetools/ac/lcdf-typetools.ac \ + $(top_srcdir)/texk/makeindexk/ac/withenable.ac \ + $(top_srcdir)/texk/makejvf/ac/withenable.ac \ + $(top_srcdir)/texk/mendexk/ac/withenable.ac \ + $(top_srcdir)/texk/musixtnt/ac/withenable.ac \ + $(top_srcdir)/texk/ps2pk/ac/withenable.ac \ + $(top_srcdir)/texk/psutils/ac/withenable.ac \ + $(top_srcdir)/texk/seetexk/ac/withenable.ac \ + $(top_srcdir)/texk/tex4htk/ac/withenable.ac \ + $(top_srcdir)/texk/ttf2pk2/ac/withenable.ac \ + $(top_srcdir)/texk/ttfdump/ac/withenable.ac \ + $(top_srcdir)/texk/upmendex/ac/withenable.ac \ + $(top_srcdir)/texk/xdvik/ac/withenable.ac \ + $(top_srcdir)/texk/xdvik/ac/xdvik.ac \ + $(top_srcdir)/texk/texlive/ac/withenable.ac \ + $(top_srcdir)/texk/texlive/ac/texlive.ac \ + $(top_srcdir)/libs/pplib/ac/withenable.ac \ + $(top_srcdir)/libs/harfbuzz/ac/withenable.ac \ + $(top_srcdir)/libs/icu/ac/withenable.ac \ + $(top_srcdir)/libs/teckit/ac/withenable.ac \ + $(top_srcdir)/libs/graphite2/ac/withenable.ac \ + $(top_srcdir)/libs/zziplib/ac/withenable.ac \ + $(top_srcdir)/libs/xpdf/ac/withenable.ac \ + $(top_srcdir)/libs/mpfr/ac/withenable.ac \ + $(top_srcdir)/libs/gmp/ac/withenable.ac \ + $(top_srcdir)/libs/cairo/ac/withenable.ac \ + $(top_srcdir)/libs/pixman/ac/withenable.ac \ + $(top_srcdir)/libs/gd/ac/withenable.ac \ + $(top_srcdir)/libs/freetype2/ac/withenable.ac \ + $(top_srcdir)/libs/libpng/ac/withenable.ac \ + $(top_srcdir)/libs/libpaper/ac/withenable.ac \ + $(top_srcdir)/libs/luajit/ac/withenable.ac \ + $(top_srcdir)/libs/lua53/ac/withenable.ac \ + $(top_srcdir)/libs/zlib/ac/withenable.ac \ + $(top_srcdir)/texk/ptexenc/ac/withenable.ac \ + $(top_srcdir)/texk/kpathsea/ac/withenable.ac \ + $(top_srcdir)/texk/kpathsea/ac/mktex.ac \ + $(top_srcdir)/texk/kpathsea/ac/kpathsea.ac \ + $(top_srcdir)/texk/ptexenc/ac/ptexenc.ac \ + $(top_srcdir)/libs/zlib/ac/zlib.ac \ + $(top_srcdir)/libs/libpaper/ac/libpaper.ac \ + $(top_srcdir)/libs/libpng/ac/libpng.ac \ + $(top_srcdir)/libs/freetype2/ac/freetype2.ac \ + $(top_srcdir)/libs/gd/ac/gd.ac \ + $(top_srcdir)/libs/pixman/ac/pixman.ac \ + $(top_srcdir)/libs/cairo/ac/cairo.ac \ + $(top_srcdir)/libs/gmp/ac/gmp.ac \ + $(top_srcdir)/libs/mpfr/ac/mpfr.ac \ + $(top_srcdir)/libs/xpdf/ac/xpdf.ac \ + $(top_srcdir)/libs/zziplib/ac/zziplib.ac \ + $(top_srcdir)/libs/graphite2/ac/graphite2.ac \ + $(top_srcdir)/libs/teckit/ac/teckit.ac \ + $(top_srcdir)/libs/icu/ac/icu.ac \ + $(top_srcdir)/libs/harfbuzz/ac/harfbuzz.ac \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ + $(am__configure_deps) $(am__DIST_COMMON) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + cscope distdir distdir-am dist dist-all distcheck +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +CSCOPE = cscope +am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/am/dist_hook.am \ + $(srcdir)/am/recurse.am $(top_srcdir)/build-aux/compile \ + $(top_srcdir)/build-aux/config.guess \ + $(top_srcdir)/build-aux/config.sub \ + $(top_srcdir)/build-aux/install-sh \ + $(top_srcdir)/build-aux/ltmain.sh \ + $(top_srcdir)/build-aux/missing ChangeLog README \ + build-aux/ar-lib build-aux/compile build-aux/config.guess \ + build-aux/config.sub build-aux/depcomp build-aux/install-sh \ + build-aux/ltmain.sh build-aux/missing build-aux/texinfo.tex \ + build-aux/ylwrap +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + if test -d "$(distdir)"; then \ + find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -rf "$(distdir)" \ + || { sleep 5 && rm -rf "$(distdir)"; }; \ + else :; fi +am__post_remove_distdir = $(am__remove_distdir) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +GZIP_ENV = --best +DIST_ARCHIVES = $(distdir).tar.xz +DIST_TARGETS = dist-xz +# Exists only to be overridden by the user if desired. +AM_DISTCHECK_DVI_TARGET = dvi +am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ + | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' +ACLOCAL = @ACLOCAL@ --force +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AS = @AS@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CONF_SUBDIRS = @CONF_SUBDIRS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DLLTOOL = @DLLTOOL@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FT2_CONFIG = @FT2_CONFIG@ +GREP = @GREP@ +ICU_CONFIG = @ICU_CONFIG@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MAKE_SUBDIRS = @MAKE_SUBDIRS@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +WARNING_CFLAGS = @WARNING_CFLAGS@ +WARNING_CXXFLAGS = @WARNING_CXXFLAGS@ +XMKMF = @XMKMF@ +X_CFLAGS = @X_CFLAGS@ +X_EXTRA_LIBS = @X_EXTRA_LIBS@ +X_LIBS = @X_LIBS@ +X_PRE_LIBS = @X_PRE_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +subdirs = @subdirs@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +AM_DISTCHECK_CONFIGURE_FLAGS = -C +distuninstallcheck_listfiles = find . -type f -o -type l -print +distcleancheck_listfiles = find . -type f -o -type l -print +EXTRA_DIST = \ + Build \ + README.0overview \ + README.1prerequisites \ + README.2building \ + README.3installing \ + README.4layout \ + README.5configure \ + README.6cross \ + README.7coding \ + build-aux/README.TL \ + m4/ChangeLog \ + m4/README \ + reautoconf + +NEVER_DIST = `find . $(NEVER_NAMES)` +NEVER_NAMES = -name .svn +NEVER_NAMES_SUB = -o -name .deps -o -name .dirstamp -o -name '*.$(OBJEXT)' +NEVER_NAMES_LT = -o -name .libs -o -name '*.lo' + +# Files not to be distributed +SUBDIRS = . doc $(MAKE_SUBDIRS) libs utils texk +DIST_SUBDIRS = auxdir/auxsub doc $(CONF_SUBDIRS) libs utils texk +recurse_this = +recurse_top = + +# am/recurse.am: Makefile fragment to configure and build subdirs. +# +# Copyright 2017-2020 Karl Berry +# Copyright 2013 Peter Breitenlohner +# You may freely use, modify and/or distribute this file. +# +# Requires $(recurse_this) and $(recurse_top). +# Uses CONF_SUBDIRS and MAKE_SUBDIRS (set by kpse-setup.m4). +# +# For subdirs not required for the current set of configure options +# we append '--disable-build' so they can skip tests that would +# fail because, e.g., some required libraries were not built. +# (By manually testing $enable_build in configure, e.g., dvisvgm/configure.) +# +# Code inspired by automake's way to handle recursive targets. +# +cf_silent = $(cf_silent_@AM_V@) +cf_silent_ = $(cf_silent_@AM_DEFAULT_V@) +cf_silent_0 = --silent +cf_silent_1 = +CONFIG_AUX = $(recurse_top)subsubdir-conf.cmd +# Run texlinks here since the binaries won't be there +# at install-data, and fmtutil.cnf won't be there at install-exec, +# and there is no install-hook or install-local. +texlinks_dir = texk/texlive/tl_support + +# should be harmless to run it, but just in case: +build_info_target = buildinfo +@cross_FALSE@check_target = check + +# Allow for skipping make check if needed. +@cross_TRUE@check_target = skip +all: all-recursive + +.SUFFIXES: +am--refresh: Makefile + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ + $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ + esac; +$(srcdir)/am/dist_hook.am $(srcdir)/am/recurse.am $(am__empty): + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + $(am__cd) $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscope: cscope.files + test ! -s cscope.files \ + || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) +clean-cscope: + -rm -f cscope.files +cscope.files: clean-cscope cscopelist +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + -rm -f cscope.out cscope.in.out cscope.po.out cscope.files + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + $(am__remove_distdir) + test -d "$(distdir)" || mkdir "$(distdir)" + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" distdir="$(distdir)" \ + dist-hook + -test -n "$(am__skip_mode_fix)" \ + || find "$(distdir)" -type d ! -perm -755 \ + -exec chmod u+rwx,go+rx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r "$(distdir)" +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz + $(am__post_remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 + $(am__post_remove_distdir) + +dist-lzip: distdir + tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz + $(am__post_remove_distdir) +dist-xz: distdir + tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz + $(am__post_remove_distdir) + +dist-zstd: distdir + tardir=$(distdir) && $(am__tar) | zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst + $(am__post_remove_distdir) + +dist-tarZ: distdir + @echo WARNING: "Support for distribution archives compressed with" \ + "legacy program 'compress' is deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__post_remove_distdir) + +dist-shar: distdir + @echo WARNING: "Support for shar distribution archives is" \ + "deprecated." >&2 + @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz + $(am__post_remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__post_remove_distdir) + +dist dist-all: + $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' + $(am__post_remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lz*) \ + lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ + *.tar.xz*) \ + xz -dc $(distdir).tar.xz | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + *.tar.zst*) \ + zstd -dc $(distdir).tar.zst | $(am__untar) ;;\ + esac + chmod -R a-w $(distdir) + chmod u+w $(distdir) + mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst + chmod a-w $(distdir) + test -d $(distdir)/_build || exit 0; \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && am__cwd=`pwd` \ + && $(am__cd) $(distdir)/_build/sub \ + && ../../configure \ + $(AM_DISTCHECK_CONFIGURE_FLAGS) \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + --srcdir=../.. --prefix="$$dc_install_base" \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) $(AM_DISTCHECK_DVI_TARGET) \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ + && cd "$$am__cwd" \ + || exit 1 + $(am__post_remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @test -n '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: trying to run $@ with an empty' \ + '$$(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + $(am__cd) '$(distuninstallcheck_dir)' || { \ + echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ + exit 1; \ + }; \ + test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile all-local +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-libtool \ + distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + @$(NORMAL_INSTALL) + $(MAKE) $(AM_MAKEFLAGS) install-exec-hook +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(am__recursive_targets) install-am install-exec-am \ + install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \ + am--refresh check check-am clean clean-cscope clean-generic \ + clean-libtool cscope cscopelist-am ctags ctags-am dist \ + dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ + dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \ + distclean-generic distclean-libtool distclean-tags \ + distcleancheck distdir distuninstallcheck dvi dvi-am html \ + html-am info info-am install install-am install-data \ + install-data-am install-dvi install-dvi-am install-exec \ + install-exec-am install-exec-hook install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-am uninstall uninstall-am + +.PRECIOUS: Makefile + +dist-hook: + cd "$(distdir)" && rm -rf $(NEVER_DIST) + +all-local: recurse + +.PHONY: recurse +recurse: $(CONFIG_AUX) + @fail= failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + list='$(CONF_SUBDIRS)'; for one_dir in $$list; do \ + if test ! -f $$one_dir/Makefile; then \ + test -d $$one_dir || $(MKDIR_P) $$one_dir; \ + cmd=`cat $(CONFIG_AUX) | sed "s,auxdir/auxsub,$(recurse_this)$$one_dir,g"`; \ + case " $(MAKE_SUBDIRS) " in \ + *" $$one_dir "*) skip=;; \ + *) skip=' --disable-build';; \ + esac; \ + (cd $$one_dir && echo "=== configuring in $$one_dir (`pwd`)" && \ + if $(AM_V_P); then echo "make: running $(SHELL) $$cmd$$skip"; fi && \ + CONFIG_SHELL=$(SHELL) && export CONFIG_SHELL && \ + eval $(SHELL) $$cmd$$skip $(cf_silent) || \ + { echo "=== configuring in $$one_dir failed"; exit 1; }) && \ + if test "x$$skip" = x; then \ + echo "Making all in $$one_dir" && \ + (cd $$one_dir && $(MAKE) $(AM_MAKEFLAGS) all); \ + fi || eval $$failcom; \ + fi; \ + done; test -z "$$fail" + +$(CONFIG_AUX): + @echo "configure in $(recurse_top)auxdir/auxsub failed to create the file $@" + exit 1 + +# This (world) is the default target for the ./Build script in TeX Live. +.PHONY: world +world: all +# Serialize 'make all' and 'make install-strip'. + @echo "top-level make $@: running install-strip..." + $(MAKE) $(AM_MAKEFLAGS) install-strip +# +# Just in case it's not a full checkout. + if test -d "$(texlinks_dir)"; then \ + echo "top-level make $@: making run-texlinks in $(texlinks_dir) ..."; \ + cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks; \ + else :; fi +# + @echo "top-level make $@: running $(check_target)..." + $(MAKE) $(AM_MAKEFLAGS) $(check_target) +# + @echo "top-level make $@ done." + +# create file buildinfo.log in working directory, to record relevant +# information about the build environment. +buildinfo: + -env MAKE="$(MAKE)" LDFLAGS="$(LDFLAGS)" \ + CC="$(CC)" CFLAGS="$(CFLAGS)" \ + CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" \ + OBJCXX="$(OBJCXX)" OBJCXXFLAGS="$(OBJCXXFLAGS)" \ + $(srcdir)/doc/buildinfo.sh >buildinfo.log + +# run buildinfo first. +all-recursive: buildinfo + +install-exec-hook: + @echo "WARNING: make install does not result in a usable TeX!" + @echo " ! The binaries require the myriad support files." + @echo " ! See http://tug.org/texlive/distro.html" + @echo " ! and http://tug.org/texlive/build.html#deploy, for example." +skip: +.PHONY: skip + +# Convenience targets to run texlinks and reautoconf. +.PHONY: texlinks +texlinks: + cd $(texlinks_dir) && $(MAKE) $(AM_MAKEFLAGS) run-texlinks + +# Special target to run TRIP and TRAP tests and create diffs. +.PHONY: triptrap +triptrap: + cd texk && $(MAKE) $(AM_MAKEFLAGS) $@ + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: -- cgit v1.2.3