From e176f01540d6c8f3f3f1259d7cb5286c31e81206 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Tue, 19 Dec 2017 22:32:49 +0000 Subject: amscls (19dec17) git-svn-id: svn://tug.org/texlive/trunk@46099 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/bibtex/bst/amscls/amsalpha.bst | 72 +- Master/texmf-dist/bibtex/bst/amscls/amsplain.bst | 72 +- Master/texmf-dist/doc/latex/amscls/00LICENSE.txt | 2 + Master/texmf-dist/doc/latex/amscls/README | 50 +- Master/texmf-dist/doc/latex/amscls/amsclass.pdf | Bin 373738 -> 373922 bytes Master/texmf-dist/doc/latex/amscls/amsthdoc.pdf | Bin 113400 -> 177495 bytes Master/texmf-dist/doc/latex/amscls/diffs-c.txt | 59 +- Master/texmf-dist/doc/latex/amscls/instr-l.pdf | Bin 175195 -> 0 bytes Master/texmf-dist/doc/latex/amscls/manifest.txt | 66 +- Master/texmf-dist/source/latex/amscls/amsclass.dtx | 44 +- Master/texmf-dist/source/latex/amscls/amsclass.ins | 10 +- Master/texmf-dist/source/latex/amscls/amsthdoc.tex | 17 +- Master/texmf-dist/source/latex/amscls/install.txt | 92 +- Master/texmf-dist/source/latex/amscls/instr-l.tex | 1233 -------------------- Master/texmf-dist/source/latex/amscls/thmtest.tex | 70 +- Master/texmf-dist/tex/latex/amscls/amsart.cls | 34 +- Master/texmf-dist/tex/latex/amscls/amsbook.cls | 34 +- Master/texmf-dist/tex/latex/amscls/amsproc.cls | 34 +- Master/texmf-dist/tex/latex/amscls/amsthm.sty | 22 +- 19 files changed, 387 insertions(+), 1524 deletions(-) delete mode 100644 Master/texmf-dist/doc/latex/amscls/instr-l.pdf delete mode 100644 Master/texmf-dist/source/latex/amscls/instr-l.tex diff --git a/Master/texmf-dist/bibtex/bst/amscls/amsalpha.bst b/Master/texmf-dist/bibtex/bst/amscls/amsalpha.bst index af9f6b43876..36c4d71bcd7 100644 --- a/Master/texmf-dist/bibtex/bst/amscls/amsalpha.bst +++ b/Master/texmf-dist/bibtex/bst/amscls/amsalpha.bst @@ -1,44 +1,34 @@ -%%% ==================================================================== -%%% @BibTeX-style-file{ -%%% filename = "amsalpha.bst", -%%% version = "2.0", -%%% date = "2000/03/27", -%%% time = "13:49:36 EST", -%%% checksum = "00166 1404 4124 29978", -%%% author = "American Mathematical Society", -%%% address = "American Mathematical Society, -%%% Technical Support, -%%% Electronic Products and Services, -%%% P. O. Box 6248, -%%% Providence, RI 02940, -%%% USA", -%%% telephone = "401-455-4080 or (in the USA and Canada) -%%% 800-321-4AMS (321-4267)", -%%% FAX = "401-331-3842", -%%% email = "tech-support@ams.org (Internet)", -%%% copyright = "Copyright 1995 American Mathematical Society, -%%% all rights reserved. Copying of this file is -%%% authorized only if either: -%%% (1) you make absolutely no changes to your copy, -%%% including name; OR -%%% (2) if you do make changes, you first rename it -%%% to some other name.", -%%% codetable = "ISO/ASCII", -%%% keywords = "bibtex, bibliography, amslatex, ams-latex", -%%% supported = "yes", -%%% abstract = "BibTeX bibliography style `amsalpha' for BibTeX -%%% versions 0.99a or later and LaTeX version 2e. -%%% Produces alphabetic-label bibliography items in -%%% a form typical for American Mathematical Society -%%% publications.", -%%% docstring = "The checksum field above contains a CRC-16 -%%% checksum as the first value, followed by the -%%% equivalent of the standard UNIX wc (word -%%% count) utility output of lines, words, and -%%% characters. This is produced by Robert -%%% Solovay's checksum utility.", -%%% } -%%% ==================================================================== +%% filename: amsalpha.bst +%% version: 2.0 +%% date: 2000/03/27 +%% +%% American Mathematical Society +%% Technical Support +%% Publications Technical Group +%% 201 Charles Street +%% Providence, RI 02904 +%% USA +%% tel: (401) 455-4080 +%% (800) 321-4267 (USA and Canada only) +%% fax: (401) 331-3842 +%% email: tech-support@ams.org +%% +%% Copyright 1995, 2000, 2010 American Mathematical Society. +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ==================================================================== % See the file btxbst.doc for extra documentation other than % what is included here. And see btxhak.tex for a description diff --git a/Master/texmf-dist/bibtex/bst/amscls/amsplain.bst b/Master/texmf-dist/bibtex/bst/amscls/amsplain.bst index 3098bee32c3..2c835430577 100644 --- a/Master/texmf-dist/bibtex/bst/amscls/amsplain.bst +++ b/Master/texmf-dist/bibtex/bst/amscls/amsplain.bst @@ -1,44 +1,34 @@ -%%% ==================================================================== -%%% @BibTeX-style-file{ -%%% filename = "amsplain.bst", -%%% version = "2.0", -%%% date = "2000/03/27", -%%% time = "13:49:29 EST", -%%% checksum = "37449 1255 3734 27098", -%%% author = "American Mathematical Society", -%%% address = "American Mathematical Society, -%%% Technical Support, -%%% Electronic Products and Services, -%%% P. O. Box 6248, -%%% Providence, RI 02940, -%%% USA", -%%% telephone = "401-455-4080 or (in the USA and Canada) -%%% 800-321-4AMS (321-4267)", -%%% FAX = "401-331-3842", -%%% email = "tech-support@ams.org (Internet)", -%%% copyright = "Copyright 1995 American Mathematical Society, -%%% all rights reserved. Copying of this file is -%%% authorized only if either: -%%% (1) you make absolutely no changes to your copy, -%%% including name; OR -%%% (2) if you do make changes, you first rename it -%%% to some other name.", -%%% codetable = "ISO/ASCII", -%%% keywords = "bibtex, bibliography, amslatex, ams-latex", -%%% supported = "yes", -%%% abstract = "BibTeX bibliography style `amsplain' for BibTeX -%%% versions 0.99a or later and LaTeX version 2e. -%%% Produces numeric-label bibliography items in -%%% a form typical for American Mathematical Society -%%% publications.", -%%% docstring = "The checksum field above contains a CRC-16 -%%% checksum as the first value, followed by the -%%% equivalent of the standard UNIX wc (word -%%% count) utility output of lines, words, and -%%% characters. This is produced by Robert -%%% Solovay's checksum utility.", -%%% } -%%% ==================================================================== +%% filename: amsplain.bst +%% version: 2.0 +%% date: 2000/03/27 +%% +%% American Mathematical Society +%% Technical Support +%% Publications Technical Group +%% 201 Charles Street +%% Providence, RI 02904 +%% USA +%% tel: (401) 455-4080 +%% (800) 321-4267 (USA and Canada only) +%% fax: (401) 331-3842 +%% email: tech-support@ams.org +%% +%% Copyright 1995, 2000, 2010 American Mathematical Society. +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ==================================================================== % See the file btxbst.doc for extra documentation other than % what is included here. And see btxhak.tex for a description diff --git a/Master/texmf-dist/doc/latex/amscls/00LICENSE.txt b/Master/texmf-dist/doc/latex/amscls/00LICENSE.txt index d779a36f8b9..402f74e422c 100644 --- a/Master/texmf-dist/doc/latex/amscls/00LICENSE.txt +++ b/Master/texmf-dist/doc/latex/amscls/00LICENSE.txt @@ -1,3 +1,5 @@ +00LICENSE.txt, 2010/05/04 + The AMS is in the process of restating and updating the licenses on all components of the AMS-LaTeX and AMSFonts distributions in order to bring their licenses into line with current standards of "free" diff --git a/Master/texmf-dist/doc/latex/amscls/README b/Master/texmf-dist/doc/latex/amscls/README index e9272076df5..7273ec23ece 100644 --- a/Master/texmf-dist/doc/latex/amscls/README +++ b/Master/texmf-dist/doc/latex/amscls/README @@ -1,6 +1,6 @@ -README file for AMS document classes amsart/book/proc 2.20.2 [2015/03/10] +README file for AMS document classes amsart/book/proc 2.20.4 [2017/10/31] -Copyright 2004, 2010, 2014-2015 American Mathematical Society. +Copyright 2004, 2010, 2014-2017 American Mathematical Society. This work may be distributed and/or modified under the conditions of the LaTeX Project Public License, either version 1.3c @@ -30,42 +30,61 @@ email: tech-support@ams.org See manifest.txt for a list of all the files in the distribution. -See install.txt for installation instructions. - The document classes amsart, amsbook, amsproc and related packages are provided by the American Mathematical Society for authors to use with -LaTeX. They produce the overall layout and appearance of AMS +LaTeX. They produce the overall layout and appearance of AMS publications. In order to use an AMS document class you need to have TeX software -installed first. TeX is not an AMS product. If you need information on -getting TeX see one of the following: +installed first. TeX is not an AMS product. If you need information +on getting TeX see one of the following: http://www.tug.org/ - http://www.ams.org/tex/tex-resources.html + https://www.ams.org/tex/tex-resources.html + +User documentation for the AMS document classes is contained in the +class-specific AMS Author Handbook, found at these locations: + + https://www.ams.org/tex/author-handbook (individual handbooks) + http://mirror.ctan.org/tex-archive/info/amscls-doc.zip (full source) -Documentation for the AMS document classes is found in +Additional documentation for the AMS document classes and the related +theorem package is found in - instr-l.pdf diffs-c.txt amsthdoc.pdf thmtest.tex thmtest.pdf -which are included in the collection. Additional documentation can be -found in the amsclass FAQ: +which are included in the collection. Answers to some specific +questions can be found in the AMS Author FAQ: - http://www.ams.org/tex/amsclass-faq.html + https://www.ams.org/tex/amsclass-faq.html The recommended procedure for making a custom document class based on an AMS class is to make a copy of the relevant .cls file using a different -name and edit the copy---e.g., copy amsbook.cls to mybook.cls. (In +name and edit the copy---e.g., copy amsbook.cls to mybook.cls. (In general we advise against using \LoadClass, unless the base class is frozen or changes to the base class are under your control.) ======================================================================== RECENT CHANGES +---amsclass.dtx 2.20.4 2017/10/31 +Changed \emailaddrname: replaced "E-mail" by "Email" + +---amsclass.dtx 2.20.3 2017/10/06 +Don't assume amsfonts is available when providing a fallback +definition of \dh; instead, issue a warning and substitute "dh". + +---documentation files 2017/11/15 +instr-l.* removed; superseded by (class-specific) AMS Author Handbooks +at https://www.ams.org/tex/author-handbook +or http://mirror.ctan.org/tex-archive/info/amscls-doc.zip + +======================================================================== +PREVIOUS CHANGES + ---amsthdoc.tex 2.20.2 2015/04/10 Completely rewritten, adding examples, workarounds, and notes on interaction with other packages and document classes. @@ -74,9 +93,6 @@ interaction with other packages and document classes. Patched definition of \[ for compatibility with the fixltx2e package and post-2014 versions of the LaTeX kernel. Thanks to David Carlisle. -======================================================================== -PREVIOUS CHANGES - ---amsclass.ins 2.25 2014/07/24 amsmidx.ins 1.1 2014/07/24 upref.ins 1.1 2014/07/24 diff --git a/Master/texmf-dist/doc/latex/amscls/amsclass.pdf b/Master/texmf-dist/doc/latex/amscls/amsclass.pdf index 22e5656a6a7..2e484a954e8 100644 Binary files a/Master/texmf-dist/doc/latex/amscls/amsclass.pdf and b/Master/texmf-dist/doc/latex/amscls/amsclass.pdf differ diff --git a/Master/texmf-dist/doc/latex/amscls/amsthdoc.pdf b/Master/texmf-dist/doc/latex/amscls/amsthdoc.pdf index d675694dd92..c9209b03c02 100644 Binary files a/Master/texmf-dist/doc/latex/amscls/amsthdoc.pdf and b/Master/texmf-dist/doc/latex/amscls/amsthdoc.pdf differ diff --git a/Master/texmf-dist/doc/latex/amscls/diffs-c.txt b/Master/texmf-dist/doc/latex/amscls/diffs-c.txt index 1d9402c8745..61c647df7f9 100644 --- a/Master/texmf-dist/doc/latex/amscls/diffs-c.txt +++ b/Master/texmf-dist/doc/latex/amscls/diffs-c.txt @@ -1,8 +1,65 @@ -diffs-c.txt [2004/08/06] +diffs-c.txt [2017/10/31] + +Copyright 2004, 2010, 2017 American Mathematical Society. + +American Mathematical Society +Technical Support +Publications Technical Group +201 Charles Street +Providence, RI 02904 +USA +tel: (401) 455-4080 + (800) 321-4267 (USA and Canada only) +fax: (401) 331-3842 +email: tech-support@ams.org + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3c +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3c or later is part of all distributions of LaTeX +version 2005/12/01 or later. + +This work has the LPPL maintenance status `maintained'. + +The Current Maintainer of this work is the American Mathematical +Society. + +======================================================================== History of changes for AMS document classes, the amsthm package, and other packages distributed in this collection. +======================================================================== +Differences in amsart/amsbook/amsproc 2.20.4 (October 2017) + +---Text for \emailaddrname changed from "E-mail" to "Email". + +---Don't assume amsfonts is available when providing a fallback + definition of \dh; instead, issue a warning and substitute "dh". + +---The files instr-l.tex and instr-l.pdf have been removed, replaced + by a set of Author Handbooks in the separate collection amscls-doc. + +======================================================================== +Differences in amsthdoc 2.20.3 (September 2017) + +---Corrected example (p.5), \begin{thm} ... \end{theorem} to \end{thm}. + Added problem warning about \qedhere used within a split environment. + +======================================================================== +Differences in amsart/amsbook/amsproc 2.20.2 (April 2015) + +---Patched definition of \[ for compatibility with the fixltx2e package + and post-2014 versions of the LaTeX kernel. Thanks to David Carlisle. + +======================================================================== +Differences in amsthdoc 2.20.2 (April 2015) + +---Completely rewritten, adding examples, workarounds, and notes on + interaction with other packages and document classes. + ======================================================================== Differences in amsart/amsbook/amsproc 2.20.1 (July 2009) diff --git a/Master/texmf-dist/doc/latex/amscls/instr-l.pdf b/Master/texmf-dist/doc/latex/amscls/instr-l.pdf deleted file mode 100644 index 76fabaa0e54..00000000000 Binary files a/Master/texmf-dist/doc/latex/amscls/instr-l.pdf and /dev/null differ diff --git a/Master/texmf-dist/doc/latex/amscls/manifest.txt b/Master/texmf-dist/doc/latex/amscls/manifest.txt index d566152324c..7cdaad319ba 100644 --- a/Master/texmf-dist/doc/latex/amscls/manifest.txt +++ b/Master/texmf-dist/doc/latex/amscls/manifest.txt @@ -1,71 +1,29 @@ -bibtex: -bst - -bibtex/bst: -amscls - -bibtex/bst/amscls: -amsalpha.bst -amsplain.bst - -doc: -latex - -doc/latex: -amscls - -doc/latex/amscls: 00LICENSE.txt README +amsalpha.bst amsart-template.tex amsbook-template.tex -amsbooka.pdf -amsclass.pdf -amsdtx.pdf -amsmidx.pdf -amsproc-template.tex -amsthdoc.pdf -diffs-c.txt -instr-l.pdf -manifest.txt -thmtest.pdf -upref.pdf - -source: -latex - -source/latex: -amscls - -source/latex/amscls: amsbooka.dtx amsbooka.ins +amsbooka.pdf amsclass.dtx amsclass.ins +amsclass.pdf amsdtx.dtx amsdtx.ins +amsdtx.pdf amsmidx.dtx amsmidx.ins +amsmidx.pdf +amsplain.bst +amsproc-template.tex +amsthdoc.pdf amsthdoc.tex +diffs-c.txt install.txt -instr-l.tex +manifest.txt +thmtest.pdf thmtest.tex upref.dtx upref.ins - -tex: -latex - -tex/latex: -amscls - -tex/latex/amscls: -amsart.cls -amsbook.cls -amsbooka.sty -amsdtx.cls -amsldoc.cls -amsmidx.sty -amsproc.cls -amsthm.sty -upref.sty +upref.pdf diff --git a/Master/texmf-dist/source/latex/amscls/amsclass.dtx b/Master/texmf-dist/source/latex/amscls/amsclass.dtx index 66e9095e1c5..eb6abaf520f 100644 --- a/Master/texmf-dist/source/latex/amscls/amsclass.dtx +++ b/Master/texmf-dist/source/latex/amscls/amsclass.dtx @@ -1,6 +1,6 @@ % \def\filename{amsclass.dtx} -% \def\fileversion{2.20.2} -% \def\filedate{2015/03/10} +% \def\fileversion{2.20.4} +% \def\filedate{2017/10/31} % % \iffalse meta-comment % @@ -15,12 +15,20 @@ % fax: (401) 331-3842 % email: tech-support@ams.org % -% Copyright 1995, 199, 2004, 2009, 2015 American Mathematical Society. -% -% Unlimited copying and redistribution of this file are permitted as -% long as this file is not modified. Modifications, and distribution -% of modified versions, are permitted, but only if the resulting file -% is renamed. +% Copyright 1995, 1999, 2004, 2009, 2015-2017 American Mathematical Society. +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3c +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3c or later is part of all distributions of LaTeX +% version 2005/12/01 or later. +% +% This work has the LPPL maintenance status `maintained'. +% +% The Current Maintainer of this work is the American Mathematical +% Society. % % \fi % @@ -74,13 +82,13 @@ \NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) [1995/06/01]% LaTeX date must be June 1995 or later %<*amsart> -\ProvidesClass{amsart}[2015/03/10 v2.20.2] +\ProvidesClass{amsart}[2017/10/31 v2.20.4] % %<*amsproc> -\ProvidesClass{amsproc}[2015/03/10 v2.20.2] +\ProvidesClass{amsproc}[2017/10/31 v2.20.4] % %<*amsbook> -\ProvidesClass{amsbook}[2015/03/10 v2.20.2] +\ProvidesClass{amsbook}[2017/10/31 v2.20.4] % % \end{macrocode} % For \pkg{amsthm} we need to guard against redundant loading via @@ -97,7 +105,7 @@ \csname ver@\@currname.\@currext\endcsname % %<*amsthm> -\ProvidesPackage{amsthm}[2015/03/10 v2.20.2] +\ProvidesPackage{amsthm}[2017/10/31 v2.20.4] % % \end{macrocode} % @@ -1413,7 +1421,7 @@ % % \begin{macrocode} \def\curraddrname{{\itshape Current address}} -\def\emailaddrname{{\itshape E-mail address}} +\def\emailaddrname{{\itshape Email address}} \def\urladdrname{{\itshape URL}} \def\@setaddresses{\par \nobreak \begingroup @@ -5001,9 +5009,13 @@ % The lowercase eth requires an \cs{edef} to access \fn{msbm} properly. % Define it separately to permit checking for small caps. [bnb, 2004/04/05] % \begin{macrocode} -\def\@tempa{} -\edef\@dh{% - \noexpand\mathhexbox{\hexnumber@\symAMSb}67} +\@ifundefined{symAMSb}{% + \def\@dh{dh}% + \ClassWarning{\@classname}{\string\dh\space unavailable without amsfonts; + replaced by 'dh'}% +}{% + \edef\@dh{\noexpand\mathhexbox{\hexnumber@\symAMSb}67}% +} \DeclareTextCommand{\dh}{OT1}{% \edef\@tempb{\scdefault}% \ifx\f@shape\@tempb diff --git a/Master/texmf-dist/source/latex/amscls/amsclass.ins b/Master/texmf-dist/source/latex/amscls/amsclass.ins index c2c80fa9b34..5f5aa983031 100644 --- a/Master/texmf-dist/source/latex/amscls/amsclass.ins +++ b/Master/texmf-dist/source/latex/amscls/amsclass.ins @@ -1,6 +1,6 @@ %% filename: amsclass.ins -%% version: 2.25 -%% date: 2014/07/24 +%% version: 3.03 +%% date: 2015/03/04 %% %% American Mathematical Society %% Technical Support @@ -13,7 +13,7 @@ %% fax: (401) 331-3842 %% email: tech-support@ams.org %% -%% Copyright 1999, 2010, 2014 American Mathematical Society. +%% Copyright 1999, 2010, 2011, 2014-2017 American Mathematical Society. %% %% This work may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c @@ -37,9 +37,10 @@ \keepsilent \preamble + This is a generated file. -Copyright 1995, 1999, 2004, 2009 American Mathematical Society. +Copyright 1995, 199, 2004, 2009, 2015, 2017 American Mathematical Society. American Mathematical Society Technical Support @@ -77,3 +78,4 @@ Society. } \endbatchfile + diff --git a/Master/texmf-dist/source/latex/amscls/amsthdoc.tex b/Master/texmf-dist/source/latex/amscls/amsthdoc.tex index 6102bc2d032..918dfefa0f7 100644 --- a/Master/texmf-dist/source/latex/amscls/amsthdoc.tex +++ b/Master/texmf-dist/source/latex/amscls/amsthdoc.tex @@ -1,8 +1,8 @@ %% filename: amsthdoc.tex -%% version: 2.20.2 -%% date: 2015/03/20 +%% version: 2.20.3 +%% date: 2017/06/01 %% -%% Copyright 1999, 2004, 2010, 2015 American Mathematical Society. +%% Copyright 1999, 2004, 2010, 2015, 2017 American Mathematical Society. %% %% American Mathematical Society %% Technical Support @@ -34,8 +34,8 @@ \pagestyle{myheadings} % Use the same version number as for the public amsthm release. -\def\instrversion{2.20.2} -\def\instrdate{April 2015} +\def\instrversion{2.20.3} +\def\instrdate{September 2017} \title{Using the \pkg{amsthm} Package} \author{Version \instrversion, \instrdate\\[.5ex] @@ -292,7 +292,7 @@ with 2 (or whatever is appropriate). \item ... \item ... \end{enumerate} - \end{theorem} + \end{thm} \end{verbatim} The style shown here for the item identifier matches the default for AMS document classes. It may be different for other document classes; @@ -718,6 +718,11 @@ of \pkg{amsthm}. structure, the final line is not numbered. (This is relevant only when numbers are on the left; \cn{qedhere} is inappropriate for use with displays numbered on the right.) + \item When \cn{qedhere} is within a \env{split} environment, that + part of the display is not numbered and \cn{label} is suppressed. + If \cn{qedhere} is moved outside of \env{split} the number appears + but the content of the \env{split} is shifted left, and the QED + symbol may be absent. \item In an alignment, if no \verb+&+ is present, the box does not go flush to the right margin. \item For a one-line equation, both the number and the box appear, diff --git a/Master/texmf-dist/source/latex/amscls/install.txt b/Master/texmf-dist/source/latex/amscls/install.txt index 87fedfdc25c..27519dde836 100644 --- a/Master/texmf-dist/source/latex/amscls/install.txt +++ b/Master/texmf-dist/source/latex/amscls/install.txt @@ -1,14 +1,33 @@ -install.txt for amscls 2.20 [2004/08/05] +install.txt for amscls 2.20.4 [2017/10/31] + +Copyright 2005, 2010, 2017 American Mathematical Society. + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either version 1.3c +of this license or (at your option) any later version. +The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3c or later is part of all distributions of LaTeX +version 2005/12/01 or later. + +This work has the LPPL maintenance status `maintained'. + +=========================================================================== If you have a relatively up-do-date TeX system that complies with the -TeX Directory Structure (TDS) standard, installing according to the -instructions in section I below is the easiest method. See +TeX Directory Structure (TDS) standard, check first to see if there is +an available procedure that will install the package automatically from +a CTAN archive. Otherwise, installing according to the instructions in +section I below is the easiest method. See http://www.tug.org/tds/tds.pdf -for details on the TDS standard. If your TeX system does not comply -with the TDS standard, please contact the manufacturer of your TeX -system for details on how to install third-party TeX packages. +for details on the TDS standard. TeX Live distributions comply with +the standard, as do MikTeX and MacTeX. + +If your TeX system does not comply with the TDS standard, please contact +the provider of your TeX system for details on how to install third-party +TeX packages. The first step is to identify the TEXMF folder that contains files used by LaTeX. To do this, look for the file article.cls. If you find, e.g., @@ -26,7 +45,7 @@ instructions, wherever you see "TEXMF" substitute the folder name determined in this way. If this terminology does not make sense to you, seek assistance from -a friend or colleague, or from the company that you bought your TeX +a friend or colleague, or from the source that you obtained your TeX system from, or contact us at tech-support@ams.org @@ -38,43 +57,42 @@ I. Installing the easy way. 1. Download the following archive file: - ftp://ftp.ams.org/pub/tex/amscls.zip + http://mirror.ctan.org/install/macros/latexf/required/amscls.tds.zip 2. View the following files to assess the effects of the upgrade on your system: - 00readme.txt + README install.txt (this file) diffs-c.txt -3. Backup the old version of AMS-LaTeX, preferably by moving it out of the -TEXMF tree. +3. Backup the old version of amscls, preferably by moving it out of +the TEXMF tree. -4. Extract files fromthe .zip archive using your favorite unzip tool, setting -the extraction target directory to the texmf root directory. +4. Extract files from the .zip archive using your favorite unzip tool, +setting the extraction target directory to the texmf root directory. -5. To check the end result, you should find that you now have amsmath.sty +5. To check the end result, you should find that you now have amsart.cls in the following location TEXMF/tex/latex/amscls/amsart.cls -Some TeX systems also use a database to keep track of TeX input files. If -this database is not updated, your TeX system might not find the newly -installed files. Consult your system's documentation to determine how -to update this database. +Some TeX systems also use a database to keep track of TeX input files. +If this database is not updated, your TeX system might not find the +newly installed files. Consult your system's documentation to determine +how to update this database. -6. Some files will appear in both the source area and another area. -This is because the source form and the in-use form are identical. -As distributed, the files in the source/latex/amscls area comprise a -complete copy of the distribution from which all the other files can -be regenerated if need be. If you need to conserve disk space, you +6. There are no duplicate files in this archive. As distributed, the +files in the source/latex/amscls area comprise a complete copy of the +distribution from which all the other files needed for LaTeX processing +can be regenerated if need be. If you need to conserve disk space, you could delete the files in the source area, since they are not needed for normal use. ======================================================================== II. Installing the not-so-easy way. -Download ftp://ftp.ams.org/pub/tex/amscls.zip. +Download http://mirror.ctan.org/macros/latex/required/amscls.zip Make the following directories, if not already present: @@ -82,25 +100,27 @@ Make the following directories, if not already present: TEXMF/tex/latex/amscls TEXMF/doc/latex/amscls -Backup your old AMS-LaTeX files if they are installed, preferably moving them -out of the TEXMF tree. +Backup your old amscls files if they are installed, preferably moving +them out of the TEXMF tree. -Create a temporary directory and generate documentation files (these assume -a UNIX TeX installation): +Create a temporary directory and generate documentation files (these +assume a *nix TeX installation): - make directory /tmp/amscls - unzip -d /tmp/amscls amscls.zip - cd /tmp/amscls - - Run latex on the file ams-c1.ins to produce .cls and .sty files + - Run latex on the file amsclass.ins and other *.ins files to produce + .cls and .sty files - Run latex on *.tex - - [optional] Run latex on *.dtx (technical documentation) - - move *.dvi, *.pdf, *.tex to TEXMF/doc/latex/amscls + - [optional] Run pdflatex on *.dtx (technical documentation) + - move *.pdf and *.tex to TEXMF/doc/latex/amscls - [optional] move *.dtx to TEXMF/doc/latex/amscls - - [optional] convert .dvi to .ps or .pdf - move *.sty and *.cls to TEXMF/tex/latex/amscls - delete /tmp/amscls -Some TeX systems also use a database to keep track of TeX input files. If -this database is not updated, your TeX system might not find the newly -installed files. Consult your system's documentation to determine how to -update this database. +Some TeX systems also use a database to keep track of TeX input files. +If this database is not updated, your TeX system might not find the +newly installed files. Consult your system's documentation to determine +how to update this database. + +======================================================================== diff --git a/Master/texmf-dist/source/latex/amscls/instr-l.tex b/Master/texmf-dist/source/latex/amscls/instr-l.tex deleted file mode 100644 index 30aa283237b..00000000000 --- a/Master/texmf-dist/source/latex/amscls/instr-l.tex +++ /dev/null @@ -1,1233 +0,0 @@ -%%% ==================================================================== -%%% @LaTeX-file{ -%%% filename = "instr-l.tex", -%%% version = "2.20", -%%% date = "2004/08/06", -%%% time = "16:17:21 EDT", -%%% checksum = "60855 1233 6587 50183", -%%% author = "American Mathematical Society", -%%% copyright = "Copyright 1994, 2004 American Mathematical Society, -%%% all rights reserved. Copying of this file is -%%% authorized only if either: -%%% (1) you make absolutely no changes to your copy, -%%% including name; OR -%%% (2) if you do make changes, you first rename it -%%% to some other name.", -%%% address = "American Mathematical Society, -%%% Technical Support, -%%% Publications Technical Group, -%%% 201 Charles Street, -%%% Providence, RI 02904, -%%% USA", -%%% telephone = "401-455-4080 or (in the USA and Canada) -%%% 800-321-4AMS (321-4267)", -%%% FAX = "401-331-3842", -%%% email = "tech-support@ams.org (Internet)", -%%% codetable = "ISO/ASCII", -%%% keywords = "latex, AMS, amslatex, ams-latex, author instructions", -%%% supported = "yes", -%%% abstract = "These are instructions for preparing documents for -%%% submission to the AMS, using amsmath and AMS LaTeX -%%% document classes.", -%%% docstring = "The checksum field above contains a CRC-16 checksum -%%% as the first value, followed by the equivalent of -%%% the standard UNIX wc (word count) utility output of -%%% lines, words, and characters. This is produced by -%%% Robert Solovay's checksum utility.", -%%% } -%%% ==================================================================== -\NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) -[1995/06/01]% LaTeX date must be June 1995 or later -\documentclass{amsart} - -\hyphenation{man-u-script man-u-scripts over-view pre-par-ing which-ever} - -%% Define macros for text substitution and for presentation of examples -\newcommand{\AMS}{American Mathematical Society} -\def\latex/{{\protect\LaTeX}} -\def\latexe/{{\protect\LaTeXe}} -\def\amslatex/{{\protect\AmS-\protect\LaTeX}} -\def\tex/{{\protect\TeX}} -\def\amstex/{{\protect\AmS-\protect\TeX}} -\def\bibtex/{{Bib\protect\TeX}} -\def\makeindx/{\textit{MakeIndex}} - -\newcommand{\filnam}[1]{\mbox{\texttt{\ignorespaces#1\unskip}}} -\let\fn=\filnam -\let\cls=\filnam -\let\env=\filnam -\let\pkg=\filnam -\def\opt#1{\filnam{[#1]}} - -%% For this manual, add a section number to the references header, and -%% include that section header in the contents list. -\makeatletter -\def\thebibliography#1{\section\refname - \normalfont\small\labelsep .5em\relax - \list{\@arabic\c@enumiv.}{\settowidth\labelwidth{#1.}% - \leftmargin\labelwidth \advance\leftmargin\labelsep - \usecounter{enumiv}}% - \sloppy \clubpenalty4000\relax \widowpenalty\clubpenalty - \sfcode`\.\@m} -% -%% Turn off series logo and copyright note -\let\serieslogo@\relax -\let\@setcopyright\relax - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% Table of contents customizations - -\let\tocori=\tableofcontents -\def\tableofcontents{\tocori - \skip@\lastskip \vskip-\lastskip - \addtocontents{toc}{\protect\tocpatch}% - \vskip\skip@ \relax} - -\def\tocsection#1#2#3{% - \indentlabel{\@ifnotempty{#2}{\tocnbox{\hss#1 #2.\quad}}}#3} -\let\tocnbox=\hbox -\def\tocpatch{% - \@xp\let\csname r@tocindent2\@xp\endcsname\csname r@tocindent1\endcsname - \def\tocnbox{\hbox to\@tempdima}} -%% In this document, subsections are unnumbered, but we want an indent -%% to be used. -\def\tocsubsection#1#2#3{\hbox to\leftskip{}#3} -\def\l@subsection{\@tocline{2}{0pt}{.5pc}{}{}} -\makeatother - -\newdimen\exindent -\exindent=3\parindent -%% Add a high penalty to discourage line breaks within an example -%% without absolutely prohibiting them. -{\obeylines - \gdef^^M{\par\penalty9999 }% - \gdef\beginexample#1{\medskip\bgroup % - \def\(##1){\makebox[0pt]{\normalfont\mdseries##1}}% - \def~{\char`\~}\def\\{\char`\\}% - \normalfont\ttfamily\frenchspacing % - \parindent=0pt#1\leftskip=\exindent\obeylines} -}% end \obeylines -\def\endexample{\endgraf\egroup\medskip} -\newdimen\exboxwidth -\exboxwidth=3in -\def\exbox#1#2{\noindent \hangindent=\exboxwidth - \makebox[0pt][r]{\null\normalfont\mdseries#1\unskip\enspace}% - \makebox[\exboxwidth][l]{\normalfont\ttfamily\ignorespaces#2}% - \normalfont\mdseries\ignorespaces} - -\newcommand\cn[1]{\mbox{\def\\{\char`\\}% - \normalfont\ttfamily\\\ignorespaces#1\unskip}} -\let\ttcs=\cn -\newcommand\ttcsb[2]{% - \mbox{\def\\{\char`\\}% - \normalfont\ttfamily - \\begin\{\ignorespaces#1\unskip\}\ignorespaces#2\unskip}} -\newcommand\ttcse[1]{\mbox{\def\\{\char`\\}% - \normalfont\ttfamily\\end\{\ignorespaces#1\unskip\}}} -\def\{{\char`\{\relax} -\def\}{\char`\}\relax} - -%% Provide a meta-command facility; provide an alternate escape -%% character so it can be used within the verbatim environment. - -\catcode`\|=0 -\begingroup \catcode`\>=13 % in LaTeX2e verbatim env makes > active -\gdef\?#1>{{\normalfont$\langle$\textup{#1}$\rangle$}} -\gdef\0{\relax} -\endgroup -\def\<#1>{{\normalfont$\langle$\textup{#1}$\rangle$}} -\newcommand{\Dimen}{\} -\newcommand{\tab}{\textsc{tab}} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -%% Provide a dummy titlepage, saving maketitle for the article title. -%% Table of contents goes onto the inside front cover. - -\def\instrversion{2.20} -\def\instrdate{August 2004} - -\begin{document} - -\thispagestyle{empty} -\vspace*{1.5in} -\begin{center} - {\huge\bfseries Instructions\\[2pt] for Preparation\\[2pt] - of Papers\\[2pt] and Monographs - \par\vspace{\baselineskip} - \amslatex/ - \par} - \vspace{3\baselineskip} - \Large - Version \instrversion\\[4pt] \instrdate -\end{center} -\newpage - -\thispagestyle{empty} -\tableofcontents -\newpage - -\setcounter{page}{1} - -\title [ELECTRONIC MANUSCRIPTS: \amslatex/] - {Instructions for Preparation\\ - of Papers and Monographs: \amslatex/} -\dedicatory{% - \mbox{\normalfont\mdseries\small Version \instrversion: \instrdate}} - -\maketitle - -\section{Introduction} - -This manual is directed mainly to authors preparing material for -publication by the AMS, using \amslatex/ document classes. As such, -it deals with the AMS publishing style. Since these document classes -are also used by authors who are not submitting items to the AMS, -the manual also covers topics of more general relevance. However, it -assumes familiarity with standard \latex/ techniques and conventions, -and contains only material specific to AMS packages. - -Links to information useful in preparing manuscripts and graphics -can be found on the AMS Author Resource Center web page \cite{ARC}\@. -That information supplements this manual, and we recommend that you -review it. - -The AMS produces three major types of publications: journals (both -print and electronic), proceedings volumes, and monographs. There -is a core AMS document class for each: \cls{amsart}, \cls{amsproc} -and \cls{amsbook}, respectively. For most journals or book series, -there is a specific author package, based on one of the core classes. -If the specific publication is known, the appropriate author package -should be obtained from the AMS web server \cite{AP} and used for -preparation of manuscripts. In addition, there is a separate package -for editors of proceedings volumes \cite{EP}, with facilities for -preparing material that does not fit into the normal ``article'' -category. - -If the specific publication is not known, an appropriate generic AMS -document class can be used: - -\begin{itemize} -\item \pkg{gen-j-l} for journal articles (based on \pkg{amsart}) -\item \pkg{gen-p-l} for articles in book proceedings (based on \pkg{amsproc}) -\item \pkg{gen-m-l} for monographs (based on \pkg{amsbook}) -\end{itemize} - -The tagging of elements in a manuscript---title, author(s), section -headings, theorems, etc.--- is consistent through all author packages. -Thus a manuscript prepared using the appropriate generic document -class can be modified trivially to use the specific package, simply by -updating the \cn{documentclass} statement. For example, to specify -the \textit{Contemporary Mathematics} proceedings series: -\begin{verbatim} -\documentclass{conm-p-l} -\end{verbatim} - -Each author package contains an electronic version of this manual, -class files, sample documents, and a \texttt{README} file that -contains information about each of the files in the package. - -When an AMS author package is used, both \latex/ and a recent version -of \amslatex/ must be installed on the computer being used for -manuscript preparation. The AMS Author Resource Center web page -\cite{ARC} has a link to download the most recent version of -\amslatex/. The version number appears at the top of the file -\pkg{amsmath.sty} (and other files in the collection), and is also -reported in the log file of a \latex/ run; make sure you have -version 2.0 or later. - -\section{Article preparation} - -We first address articles intended for journals and proceedings. -Monographs are addressed in a separate section (see -page~\pageref{s:mono}). - -\subsection*{Starting a new article}\label{ss:newamsart} -%% -Individual articles generally have the following structure: -\begin{itemize} -\item \verb+\documentclass{...}+ -\item preamble (for document-specific customizations) -\item \verb+\begin{document}+ -\item top matter information -\item \verb+\maketitle+ (to set the top matter) -\item article body -\item reference list -\item \verb+\end{document}+ -\end{itemize} -A detailed template file (included in each package) provides -a complete set of commands for the article top matter, and the -instructions for using them. The most efficient way to start a -new article is to make a copy of the template and fill it in. - - -\section{The preamble} - -The area between the \verb+\documentclass+ statement and the line -\verb+\begin{document}+ is referred to as the ``preamble''. This is -the place to load external packages and define document-specific -commands. - -Available \cn{documentclass} options are described in the file -\filnam{amsclass.dtx}. Process this file with \latex/ to obtain a -version with human-readable documentation. One option does need to -be mentioned here: \opt{psamsfonts}; include this option as -\begin{verbatim} -\documentclass[psamsfonts]{...} -\end{verbatim} -to ensure correct sizing of fonts in environments other than normal text. - -\subsection*{Packages} -%% -The AMS document classes incorporate the code for the AMS theorem -(\pkg{amsthm}) package and automatically load the \pkg{amsmath} -package. It is not necessary to request either one explicitly. -The user guides for these packages \cite{ATP,AMP} contain the details, -which will not be repeated here. The \pkg{amsfonts} package is loaded -as well, unless the \opt{noamsfonts} option is specified; see the -AMSFonts User's Guide \cite{AFG} for the features provided. - -Not all publicly available packages are compatible with the AMS -document classes. For this reason, we mention some that are: -\begin{itemize} -\item \pkg{amssymb} provides names for additional symbols from the - AMS symbol fonts; see \cite{AFG} for details. -\item \pkg{amsmidx} supports multiple indexes for a book; see - page~\pageref{ss:indexing}. -\item \pkg{graphicx} is part of the \latex/ suite, preferred for - inclusion of graphics. -\item \pkg{longtable} facilitates tables longer than one page. -\item \pkg{upref} forces cross-references with \cn{ref} to roman; - see ``Roman type'', page~\pageref{ss:roman}. -\item \pkg{xypic} is recommended for creating commutative diagrams. -\end{itemize} - -There are several packages that cause particular problems for AMS -production. Their use should be avoided if possible: -\begin{itemize} -\item \pkg{psfrag}, for applying labels externally to included graphics, - may result in a PostScript that can't be converted properly to PDF. -\item \pkg{epsfig} has been superseded by \pkg{graphicx}. -\end{itemize} - -Don't load any packages that aren't actually needed. - - -\subsection*{New commands} -%% -Place all definitions for new commands in the preamble. This includes -instructions to access fonts that are not already defined in the AMS -document classes or \pkg{amsmath}, such as a new math alphabet (see -\cite{AMP}). - -Always use \cn{newcommand}; this will let you know if the name you -have chosen has already been used. Do not redefine any command from -\latex/, \pkg{amsmath}, or any AMS document class, as this could cause -problems in AMS production. New definitions may be used to provide -shorthand forms for mathematical expressions that are used frequently, -but do not use new definitions for text; for articles posted on-line, -this will prevent indexing software from identifying relevant -references. - -Use commands and environments provided by the AMS document classes -and standard packages whenever applicable---for example, you should -use the AMS \env{proof} environment rather than define your own -alternative. - -When the file is complete, remove any commands that haven't been used. - - -\section{Top matter}\label{s:topmatter} - -The top matter associated with an article includes information that -would appear in a bibliographic reference to the paper, plus additional -information about the author(s), subject classifications, key words, -acknowledgments of support, and the abstract. - - -\subsection*{Summary of tags and elements} -%% -Table 1 lists the top matter commands provided by \amslatex/ -version 2.0 and later. Not every tag is necessary for each paper. -The table shows which tags are necessary and which are optional. -Requirements for monographs are somewhat different and are described -later. The template file included in every author package contains -all the necessary tags and instructions for using them. - -\begin{table}[ht] -\caption{Top matter tags} -\begin{minipage}{\textwidth} -\begin{verbatim} -\documentclass{amsart} -|?preamble commands, such as |ttcs|bgroup|0newcommand|egroup, etc.> - -\begin{document} -\end{verbatim} -\begin{center} -\begin{tabular}{lcc} -\ & \multicolumn{2}{c}{Required by}\\ -\ & Journals & Books \\ -\verb+\title[...]{...}+ & yes\rlap{${}^1$} & yes\rlap{${}^1$} \\ - -\verb+\author[...]{...}+ & yes\rlap{${}^1$} & yes\rlap{${}^1$} \\ -\verb+\contrib[...]{...}+ & no\rlap{${}^2$} & --- \\ -\verb+\address{...}+ & yes & yes \\ -\verb+\curraddr{...}+ & no & no \\ -\verb+\email{...}+ & no & no \\ -\verb+\urladdr{...}+ & no & no \\ -\verb+\dedicatory{...}+ & no & no \\ -\verb+\date{...}+ & ---\rlap{${}^3$} & --- \\ -\verb+\thanks{...}+ & no & no \\ -\verb+\translator{...}+ & ---\rlap{${}^3$} & ---\rlap{${}^3$} \\ -\verb+\keywords{...}+ & no & no \\ -\verb+\subjclass[2000]{...}+ & yes & yes \\ -\verb+\begin{abstract}...\end{abstract}+ & yes\rlap{${}^4$} & no \\ -\verb+\maketitle+ & yes & yes \\ -\end{tabular} -\end{center} -\vspace*{1pc} - -{\Small -${}^1$ If no short form is needed, omit the brackets. - -${}^2$ For contributors, see details on page~\pageref{ss:contrib}. - -${}^3$ If this is necessary, it will be filled in by the AMS staff. - -${}^4$ For the \textit{Journal of the American Mathematical Society}, -abstracts are optional. -\par -} -\end{minipage} -\vspace{.25\baselineskip} -\hrule width \textwidth -\vspace{.5\baselineskip} -\end{table} - -\subsection*{Title} -%% -For AMS journal articles, capitalize only the first word and proper -nouns in the title. For articles in an AMS proceedings volume, -capitalize the first and last words of the title and all nouns, -pronouns, adjectives, adverbs, and verbs. Articles, conjunctions, and -prepositions should be lowercased unless they are the first or last -word of the title. These rules should be followed even if the -publication in which the article appears has another style. The style -for the particular publication will be generated automatically when -the article is processed at the AMS. - -A multiline title may be left for \latex/ to break, or a desired break -may be indicated by \cn{\\}. - -Unless the title is very short, provide a form of the title suitable -for use in running heads. This should be entered in brackets between the -tag \cn{title} and the full title: -\verb+\title[+short title\verb+]{+full title\verb+}+. -Do not use author-defined macros in the title. - -\subsection*{Author information}\label{ss:authorinfo} -%% -Enter the name(s) of the author(s) with the tag \cn{author}, using -standard capitalization for proper names. Use a separate \cn{author} -command for each author. Names will be combined by \latex/ according -to the dictates of the document class. See also ``contributors'', -below. - -If the author name(s) cannot fit in the space available for the running -head, enter a shortened form for each name in [brackets] -between the tag \cn{author} and the full name. Acceptable shortened -forms use initials for all but the surname(s). For example, -\begin{verbatim} -\author[J. Smith]{Joseph Smith} -\end{verbatim} -If the list of shortened author names is still too long for the running -head (including a reasonable space for the page number), it can be -shortened as in the following example, as a last resort: -\begin{trivlist} -\item\relax -\verb+\markleft{J. SMITH ET AL.}+ -\end{trivlist} - -\noindent -Note that \cn{markleft} is available only for \amslatex/ versions 2.20 -and later; it is not a basic \latex/ command. -Data provided with \cn{markleft\{\}} \emph{must} be in all capital letters -(except for included math). Place \cn{markleft\{\}} before the first -\cn{author} in your file. - -For each author you should provide one or more addresses. Tag them -as follows, grouping them in this order by author: -\begin{verbatim} -\address{...} |rm address where the research was carried out |tt -\curraddr{...} |rm current address, if different from the research address |tt -\email{...} |rm address for electronic mail |tt -\urladdr{...} |rm URL address (optional) -\end{verbatim} -Do \emph{not} include any addresses within the scope of an -\cn{author\{\}} command (this is different from basic \latex/). -Do not use abbreviations in addresses. - -The main address should be divided by \cn{\\} into segments that -correspond to address lines for use on an envelope. When typeset, the -lines will be strung together separated by commas, but the division by -\cn{\\} will be useful to a person preparing an envelope to return -proofs. - -Addresses are considered part of the top matter, but in AMS articles -they are ordinarily printed at the end of the article following the -bibliography (this is different from basic \latex/). Suitable labels -will indicate the current, e-mail, and URL addresses, typically -\textit{Current address}:, \textit{E-mail address}:, \textit{URL}:, -respectively. - -If \texttt{\textasciitilde} is needed in a URL address, enter it -directly as \texttt{\textasciitilde} if you are using \amslatex/ -version 2.20 or later; otherwise, see the Author FAQ \cite{AF} -for instructions. - -\subsection*{Contributors - {\mdseries (new with version 2.20)}}\label{ss:contrib} -%% -Contributors are much like authors, but are responsible for only -a portion of an article, e.g., an appendix or auxiliary tables. -The bracketed portion is not optional; it gives the exact text that -will be printed to indicate the nature of the contribution: -\begin{verbatim} -\contrib[with an appendix by]{William Rogers} -\end{verbatim} -Multiple contributors and contributions are input like this: -\begin{verbatim} -\contrib[with Appendix A by]{William Rogers} -\contrib[]{Henry Taylor} -\contrib[and Appendix B by]{John Henderson} -\end{verbatim} -Note the empty brackets on the second line. Multiple contributors -indicated in this way will be combined and ``andified'' appropriately. -Contributors will not be included in running heads. Addresses provided -for contributors will be treated the same as for regular authors. - -\subsection*{Dedication} -%% -Use the tag \cn{dedicatory} for such things as ``Dedicated to -Professor X on the occasion of his eightieth birthday.'' If the -dedication is longer than one line, you may indicate a break with -\cn{\\}. - -\subsection*{Acknowledgments of support and other first-page footnotes} -%% -Use the command \cn{thanks} to acknowledge grants and other kinds of -support or for other general information not covered by one of the -more specific commands such as \cn{keywords} or \cn{subjclass}. Enter -\cn{thanks} immediately following the address(es) for the relevant -author, \emph{not} within the scope of the \cn{author\{\}} command -(this is different from basic \latex/). Like \cn{address}, \cn{thanks} -can appear more than once in the top matter. Each occurrence will be -printed as an unnumbered footnote at the bottom of the first page of -the article. - -\subsection*{Subject information} -%% -Subject classifications and key words, like acknowledg-\linebreak ments, are -part of the top matter and appear as unnumbered footnotes at the bottom of -the first page. - -Subject classifications may be primary (the major topic(s) of the -paper) or secondary (subject areas covered by ancillary results, -motivation or origin of problems discussed, intended or potential -field of application, or other significant aspects worthy of notice). -At least one primary subject classification is \textbf{required}. -Additional primaries and secondaries are optional. - -\begin{samepage} -These classifications are entered as -\begin{verbatim} -\subjclass[2000]{Primary |?primary class>; Secondary |?secondary classes>} -\end{verbatim} -(Omitting \texttt{[2000]} will cause the 1991 Subject Classification -to be cited.) -\end{samepage} - -To determine the classifications, use the 2000 Mathematics Subject -Classification scheme that appears in annual indexes of \textit{Mathematical -Reviews} beginning in 1999. It can also be accessed on the Web at URL: -\texttt{http://www.ams.org/msc/} or obtained in printed form from -Customer Services. -Please use the full number; the two-digit code from the Contents of -\textit{Mathematical Reviews} is \textbf{not} sufficient. - -Key words are not required but may be provided by an author if desired. -They should be tagged as \cn{keywords\{...\}}. - -\subsection*{Abstract} -%% -With an AMS document class, place the abstract before \cn{maketitle}, -contrary to the practice with the basic \latex/ document classes. -This is necessary to ensure that the abstract can always be printed in -the proper location and style. If the abstract is given after -\cn{maketitle}, it will be printed in place and generate a warning -message. - -Input the abstract text between \verb+\begin{abstract}...\end{abstract}+. -It may comprise multiple paragraphs and include displayed material if -appropriate. The length of the abstract depends primarily on the -length of the paper itself and on the difficulty of summarizing the -material. An upper limit of about 150 words for short papers and 300 -words for long papers is suggested. Do not use author-defined macros -or \cn{ref} in the abstract. - - -\section{Document body (all document classes)} - -\subsection*{Linking for the Web} -%% -All AMS primary journals are posted on-line. Electronic -manuscripts prepared in \latex/ for any AMS journal should be tagged -for maximum linking on the Web. For use of \cn{label}, \cn{ref}, -and \cn{cite}, see \cite{LC}; for \cn{eqref}, see \cite{AMP}. - -\subsection*{Headings} -%% -Four levels of headings are provided to permit logical sectioning of -a manuscript. These headings are applicable to individual articles -and to chapters of a monograph. (Headings specific to monographs are -listed under \textit{Monograph formatting}.) - -\begin{verbatim} -\specialsection{...} -\section[...]{...} -\subsection[...]{...} -\subsubsection[...]{...} -\end{verbatim} - -\cn{specialsection} is for long articles that need extra divisions -(e.g., parts) at a level above the \cn{section} level. - -Explicit line breaks are obtained by \verb+\\+ in first-level section -headings. - -Any heading may be given a label to allow references to be made to it, -by including a \cn{label\{...\}} command with a unique identifier -directly \emph{after} the heading. References are made using the -command \cn{ref\{...\}} and the same identifier. For example, -\begin{verbatim} -\section{Monograph formatting} -\label{s:mono} -\end{verbatim} -will establish a label for this section that can be referred to with -\cn{ref\{s:mono\}}. Cross references of -this sort will require \latex/ to be run at least twice for proper -resolution. A warning at the end of the \latex/ run, ``Cross -references may have changed\dots\unskip'', should be heeded in this regard. - - -\subsection*{Mathematical text} -%% -For instructions on preparing mathematical text, refer to -\cite{AMP} and \cite{ML}. See also ``Roman type'', below. - -\subsection*{Lists} -%% -Follow usual \latex/ conventions for producing list environments. - -\subsection*{Theorems, lemmas, and other proclamations} -%% -See the manual \textit{Using the \pkg{amsthm} package} \cite{ATP} -for details. Theorem environments following AMS style with respect to -punctuation, spacing and paragraphing are defined in the AMS document -classes. This is incompatible with the \latex/ \pkg{theorem} package, -which cannot be used with the AMS document classes. - -Three different theorem styles are provided by AMS document classes: -\cls{plain}, \cls{definition}, and \cls{remark}. By referring to these -styles and using the \cn{newtheorem} command, you can build a -complement of theorem environments appropriate for any paper or -monograph. All \cn{newtheorem} specifications should be included in -the preamble; a starter set is included in the template for every -AMS author package. - -Theorem support is also available separately in the \pkg{amsthm} package -for users of document classes other than those from the AMS. - -\subsection*{Equations} -%% -Check displayed equations carefully, making sure they are broken and -aligned following the guidelines in \cite[pp. 44--48]{MIT}. - -\subsection*{Roman type}\label{ss:roman} -%% -Numbers, punctuation, (parentheses), [brackets], -$\lbrace$braces$\rbrace$, and symbols used as labels should always be -set in roman type. This is true even within the statement of a theorem, -which is ordinarily set in italic type. - -Be careful to distinguish between roman elements that are mathematical -in nature (e.g., ``a group of class 2''), and those that are part of -the text (e.g., a label or a year). Mathematical expressions, no matter -how short or insignificant, should be coded as math, by enclosing them -within dollar signs \verb+$...$+ or \verb+\(...\)+. Roman text elements -should be coded as \cn{textup\{...\}} in potentially nonroman -environments such as theorems. - -Abbreviated forms of mathematical terms are also usually set in roman -type to distinguish them from mathematical variables or constants. -Use the control sequences for common mathematical functions and -operators like \verb+log+ and \verb+lim+; use \cn{DeclareMathOperator} -to add additional operator names (see \cite[\S5]{AMP}). - -The style of reference citations, though publication-dependent, is -usually roman. To ensure consistency and support linking for the Web, -\textbf{always} use the standard \latex/ \cn{cite} command when citing -a reference. Internal references with the \cn{ref} command are not -automatically roman in non-roman environments, but can be forced by -using the \pkg{upref} package (part of the \amslatex/ collection). - -\subsection*{Exercises} -%% -Exercises are produced using the \env{xca} and \env{xcb} environments. -\env{xca} may be used in any publication, but must be defined in -the document preamble with \cn{theoremstyle\{definition\}} and the -\cn{newtheorem} command; it is used for exercises that occur within a -section. \env{xcb} is defined only for monographs and is used for -exercises that occur at the end of a chapter. - -\subsection*{Indexing facilities} -\label{ss:indexing} -%% -The tags needed for \makeindx/ are already included in AMS document -classes. Do not include the \pkg{makeidx} package, but do put the -command \cn{makeindex} in the preamble to launch a single index. -See \cite[chapter 11]{LC} and \cite[chapter 11]{GL} for use of -\makeindx/. - -A package for multiple indexes, \pkg{amsmidx}, is included in the -\amslatex/ collection beginning with version 2.20. Unlike other -multiple-index packages, \pkg{amsmidx} is compatible with the AMS -document classes. To use this package, put these commands into the -preamble: -\begin{verbatim} -\usepackage{amsmidx} -\makeindex{|?name of first index file>} -\makeindex{|?name of second index file>} -\end{verbatim} -To identify index entries in the text: -\begin{verbatim} -\index{|?name of index file>}{|?index term>} -\end{verbatim} -In the backmatter, where the indexes are to appear: -\begin{verbatim} -\Printindex{|?name of first index file>}{|?title of first index>} -\Printindex{|?name of second index file>}{|?title of second index>} -\end{verbatim} -Note the capitalization of the \cn{Printindex} command. - -\section{Floating objects: Figures and tables} - -Figures and tables are usually handled as floating inserts. Such -items are often so large that fitting them into the document at the -point of reference may cause problems with pagination. Placing such -items into a floating insert allows them to be repositioned -automatically by \latex/ as required for good pagination. - -A floating insert generally contains one of these possibilities: -\begin{itemize} -\item \latex/ code that produces an object such as a table or - commutative diagram; -\item a command to incorporate an item produced by another application - (most often an Encapsulated PostScript (EPS) file produced by a - graphics utility; see \textit{Electronic graphics}, - page~\pageref{ss:electronicgraphics}). -\end{itemize} - -If a figure is described by \latex/ code (e.g., using \pkg{xypic} or -the \env{picture} environment), it should be included directly in the -file. - -\subsection*{Placement} -%% -Floats should -\begin{enumerate} -\item be numbered consistently throughout the paper (figures and tables - are numbered separately), -\item be placed at the top or bottom of the page, -\item have an in-text reference, and -\item definitely appear within the same section as their first text - reference. -\end{enumerate} - -A figure or table should not precede its first text reference unless -they both appear on the same page spread. When a figure or table is -an integral part of text, it may appear unnumbered in place in the -middle of text. - -Figures and tables should be allowed to float according to the \latex/ -defaults preset by the document class. If you are submitting a file -that will be processed at the AMS (this applies to all journal -articles), you could introduce major problems with pagination if you -hard-set your figures and tables by using the \verb+[h!]+ option. -Production problems will be avoided when you use the appropriate -author package class file and avoid using figure or table options. -For electronic manuscripts, the final placement of inserts will be -determined by the AMS editorial staff, on the basis of the most -appropriate page layout. - -\subsection*{Captions} -%% -Captions for floating inserts are usually positioned above a table and -below a figure. The following is the general structure used to specify -a figure insert, with a caption at the bottom: -\begin{verbatim} -\begin{figure} -\includegraphics{|?file name of |tt.eps|rm| file>}|quad|rm or|tt|quad|?code for the insertion> -\caption{|?caption text>} -\label{|?reference label>}|quad|rm (optional)|tt -\end{figure} -\end{verbatim} - -This is the general structure for a table insert, with a caption at -the top: -\begin{verbatim} -\begin{table} -\caption{|?caption text>} -\label{|?reference label>}|quad|rm (optional)|tt -|?code for the insertion body> -\end{table} -\end{verbatim} - -Caption headings (e.g., ``\textsc{Table 3.1.}''\ or -``\textsc{Figure 7.}'')\ will be supplied automatically. The -\ is any appropriate descriptive text, and may be -omitted if no descriptive text is desired. (The style of the caption -differs from the basic \latex/ caption style.) A reference label -should usually be associated with the caption, and must be given -\emph{after} the caption. A reference in text to the figure or table -has the form \cn{ref\{\\}}. - -\latex/ packages for captions may appear to work with the AMS document -classes, but the caption style doesn't usually match the AMS style. - -\subsection*{Electronic graphics}\label{ss:electronicgraphics} -%% -Graphics created by applications other than \latex/ may be submitted -to the AMS in an electronic format. This includes output from -graphics applications as well as scanned photographs or other -computer-generated images. The AMS requires such graphics in -Encapsulated PostScript (EPS) format. - -Use the \pkg{graphicx} package (part of the \pkg{graphics} bundle -of \latex/) to embed references to EPS graphics directly in a \latex/ -file; see the manual, \filnam{grfguide.tex} \cite{GB}. Another -valuable reference is the manual ``Using EPS Graphics in \latexe/ -Documents'' \cite{EG}. - -Other packages are not recommended, as there are numerous areas of -incompatibility which may result in the need for manual intervention, -delaying processing and increasing the cost. - -The EPS files will not be physically included in the \latex/ file. -You must submit a separate file for each graphic along with the \latex/ -document. No matter what method is used to produce a graphic, it is -necessary to provide a paper copy to the AMS for verification. Double -check to make sure the electronic and paper versions are the same. - -\subsection*{Compatibility requirements for graphics} -There are two important requirements that must be observed when -embedding graphics. - -\emph{Omit path names} for the included files. Instead of -\begin{verbatim} -\includegraphics*{/usr/joe/book/figures/fig1.ps} -\end{verbatim} -use just the name of the file: -\begin{verbatim} -\includegraphics*{fig1.ps} -\end{verbatim} -The easiest way to do this is to place the graphics files in the -same directory as the file(s) being {\TeX}ed. - -Do not use the \cn{graphicspath\{\\}} command to -establish a path. This will result in the path being included in -the DVI file, which will be impossible to process at the AMS\@. -It may be possible to specify a path using one of the environments -recognized by the {\TeX} engine (\fn{TEXINPUTS}, for example); -instructions for setting these environments should be in the -documentation for your system. - -Graphics commands must be compatible with the \textit{dvips} output -driver. This is particularly important if you are submitting a DVI -file for a camera-ready publication. The method is specific to the -graphics package you are using; a typical method is to use a file -\filnam{graphics.cfg} containing the line \cn{ExecuteOptions\{dvips\}} -when you run \latex/ to create the DVI or PostScript file to send to -the AMS. - -\subsection*{Technical requirements for graphics} -%% -If you scale a figure before submitting it, remember that line weights -also scale. The lightest line weight that will reproduce clearly at -high resolution is 0.5pt after scaling. Do \emph{not} specify -``hairline'' weight, as this will be nearly invisible at high -resolution and will disappear in the printing process. If a rule line -is screened, its weight should be no less than 1 point \emph{after} -scaling. - -Graded line weights should increase in increments of at least 0.5pt. -Increments less than this are insufficiently distinguishable at high -resolution. - -Screened fills should be screened not less than 15\% (less will print -as white) and not greater than 85\% (greater will print as black). - -Ideally, text included in graphics files should be font outlines -rather than bitmaps, because the AMS typesets its publications on a -high-resolution imagesetter, not a laser printer. Text or lines in -graphics which are 300dpi bitmaps (which look fine in the -laser-printed output of your article) may appear poor in quality next -to the high-resolution text of AMS publications. If bitmaps of -characters are part of bitmapped line art files, output will be -satisfactory if the bitmapped characters are at 1200dpi. - -\subsection*{Color graphics} -%% -AMS publications are ordinarily printed in black and white. -Use of color requires explicit permission from the AMS. - -Color figures should have the resolution of at least 266 pixels per -inch when printed at 100\%, and must also be suitable for printing -as grayscale. The files must be in EPS format - - -\section{Bibliographic references} -%% -\subsection*{Using \protect\bibtex/ to prepare a bibliography}% -An author may find it convenient to maintain a file of references in -\bibtex/ form, as described in \textit{The \latex/ Companion} -\cite[Section 13.2]{LC}. Two \bibtex/ styles are provided: - -\begingroup -\exindent=2\parindent -\beginexample{\exboxwidth=1.05in} -\exbox{}{amsplain.bst} will produce numeric labels; preferred for articles; -\exbox{}{amsalpha.bst} will produce labels constructed from the % - author name(s)\newline and year of publication. -\endexample -\endgroup - -\noindent -Both will translate references in a \bibtex/ input (\filnam{.bib}) -file to \latex/ input in a \filnam{.bbl} file in the form appropriate -for AMS publications, including all necessary formatting instructions. -This method of preparing bibliographies is therefore recommended. - -To access a \bibtex/ bibliography in a paper or monograph, include these -instructions in the appropriate place in the input file: -\begin{verbatim} -\bibliographystyle{|?style>}|qquad|rm(|tt|0amsplain |rm or|tt amsalpha|rm)|tt -\bibliography{|?name of bibliography |bgroup|tt.bib|egroup| file>} -\end{verbatim} - -Running \bibtex/ on the \filnam{.bib} file will produce a \filnam{.bbl} -file. The \filnam{.bib} file may have any name the author finds convenient; -however, the \filnam{.bbl} file must have the same name as the source file -for a monograph from which it is input, so it may be necessary for the -author to rename it. For an article, after the bibliography has been -completed (including processing by \bibtex/), the contents of the -\filnam{.bbl} file should be inserted into the main article input file, -replacing the \cn{bibliographystyle} and \cn{bibliography} statements. - -Items in the bibliography are usually ordered alphabetically by author. -\bibtex/ processing may alter this order, especially if the -\filnam{amsalpha} style is used. - -All categories of bibliographic entries listed in -\cite[Table 13.1]{LC} are supported in the two AMS \bibtex/ styles. -In addition to the fields listed in Table 13.1, a \verb+language+ -field is provided for use in identifying the original language of an -item whose title has been translated. - -The \pkg{harvard} package (available from CTAN) provides an -author-year style that is compatible with the AMS document classes. -This should ordinarily be used only for monographs on historical -topics. - -Standard abbreviations for periodicals should be obtained from -\cite{ASMR}\@. - -\subsection*{Preparing a bibliography without \protect\bibtex/} -%% -The references section of a paper is contained between the commands -\begin{verbatim} -\begin{thebibliography}{|?model label>} -\end{thebibliography} -\end{verbatim} -This environment is resolved as an unnumbered section in an article -or an unnumbered chapter in a monograph, following AMS publication -specifications. The indentation for the labels is set to an -appropriate width using the model given with the \cn{begin} command. -Thus the widest label in the bibliography should be used as the model; -for example, \verb+99+ will provide space for a 2-digit numeric label. - -For the proper order of reference elements and use of fonts and -punctuation, look at an issue or volume in the journal or book series -for which your document is intended and follow the examples you see -there. More examples are given in \cite{MIT}. - -\subsubsection*{Reference input} -%% -Begin each item with the command \cn{bibitem\{\\}}. -The \latex/ default is to number references automatically; however, -other labels may be used by inserting an optional key argument in -square brackets between the command and the internal label: -\begin{verbatim} -\bibitem[ABC]{Arno1994} -\end{verbatim} -The item label and the key need not be identical. Whatever appears -within the \verb+[ ]+ is what prints; whatever is within the curly -braces is used for linking and must not include any math or special -characters. - -Give at least one full name; initials and last name is an acceptable -form. If a subsequent reference is by the same author(s), use -\cn{bysame} instead of the name(s). - -For examples, refer to \cite{MIT}. - - -\section{Monograph formatting}\label{s:mono} - -A monograph is a long work by a single author or co-authors on a -single subject. Each chapter should be prepared as a separate file, -as should the bibliography. In addition, a ``driver'' file should be -used to input all the others. These files should be given meaningful -names, so that when they are transmitted to the AMS, there will be no -question about which file represents which chapter. For example, a -monograph by author Grey might be composed of files named -\filnam{grey.tex} (the driver file), \filnam{grey-ch1.tex}, -\filnam{grey-ch2.tex}, \dots, \filnam{grey-ch12.tex}, -\filnam{grey-appa.tex}, etc., and \filnam{grey-bib.tex}. -If the author name is a common one, please include something to make -it unique, such as first initials. - -Information that identifies the author(s), the subject matter of the -monograph, acknowledgments of support, and so forth, will appear in the -front matter of the book. Place this information in the driver file, -and use the tags shown below. Most of these are the same as the tags -associated with the top matter of an article; see the \textit{Top -matter} section (page~\pageref{s:topmatter}) for explanations and an -indication of which tags are required. - -\subsection*{Starting a new monograph}\label{s:newamsbook} -%% -The driver file for a monograph is generally made up of the following: -\begin{itemize} -\item \verb+\documentclass{...}+ -\item preamble (where extra definitions might go) -\item \verb+\begin{document}+ -\item \verb+\frontmatter+ -\item title page and copyright page information -\item \verb+\maketitle+ (to set the title page and copyright page; see note) -\item \verb+\include+ files (e.g., preface, introduction) -\item \verb+\mainmatter+ -\item \verb+\include+ files (e.g., main chapters, appendices) -\item \verb+\backmatter+ -\item commands for bibliography, index -\item \verb+\end{document}+ -\end{itemize} - -\noindent -Note: The title and copyright pages are for information only, so that -a printed copy can be associated with the correct author(s). The final -copy will be prepared at the AMS. - -For a typical driver file, see the template for \cls{amsbook}, included -in the \amslatex/ collection. - -Instructions for preparing a dedication page are given in the AMS -Author FAQ \cite{AF}. - -The table of contents will be produced automatically from a -\filnam{.toc} file produced anew in each run of \latex/. Since there is -no \filnam{.toc} before the first run, the body of the table of contents -will be empty on the first run. It is AMS style to include only -first-level heads, chapter titles, and part titles in the table of -contents. - -Chapters in AMS book series start on right-hand (odd-numbered) pages. -Blank pages will be provided as necessary at the end of earlier material -to accomplish this. - - -\subsection*{Chapter titles} -%% -Chapter titles should be capitalized as follows: the first and last -words of the title and all nouns, pronouns, adjectives, adverbs, and -verbs should be capitalized. Articles, conjunctions, and prepositions -should be lowercased unless they are the first or last word of the title. - -There are three common variations of the chapter title. The form with -a chapter number is most common: -\begin{verbatim} -\chapter{Matrix Algebras} -\end{verbatim} - -The second variation is an appendix, where the word ``Appendix'' -replaces the word ``Chapter''. Use the command \cn{appendix} before -the first \cn{chapter} command in a sequence of appendix chapters. -\begin{verbatim} -\appendix -\chapter{Poisson Integral} -\end{verbatim} -In addition to ``Appendix'', the counter will produce letters ``A'', -``B'', ``C'', etc.,\ instead of numbers. - -The third variation is used for an element such as a preface or -introduction, which has no pretitle text at all. For this, use the -\cn{chapter*} command: -\begin{verbatim} -\chapter*{Preface} -\end{verbatim} -Unlike the \latex/ \cls{book} class, the AMS document classes will -place entries for unnumbered chapters in the table of contents, as -required by AMS style. - -\subsection*{Monograph running heads} -%% -The chapter title is used for the left running head and section -headings for the right running head. The chapter title repeats if -there are no sections. If the text of a section heading is too long -to fit as a running head, use the square-bracket option to specify a -shortened form for use in the running heads: - -\begin{verbatim} -\section[Fourier coefficients of periodic functions] - {Fourier coefficients of continuous periodic functions - of bounded entropy norm} -\end{verbatim} - -If the chapter title is too long to fit as a running head, a shortened -form can be supplied in a similar way. Full chapter titles and section -headings will be used in the table of contents (this is different from -basic \latex/). - -\subsection*{Numbering of figures and tables} -%% -The preferred AMS style for numbering figures and tables is to start -numbering from 1 within each chapter, and to include both the chapter -and element number in the printed caption heading. For example, the -first figure in Chapter 5 would be numbered ``\textsc{Figure} 5.1''. -The \cls{amsbook} document class resets figure and table numbers -automatically, but does not include the chapter number in the printed -caption. To add the chapter number, place these lines in the preamble -of the driver file: -\begin{verbatim} -\numberwithin{figure}{chapter} -\numberwithin{table}{chapter} -\end{verbatim} - - -\section{Getting help} - -Many questions raised by authors are answered in the AMS Author FAQ -\cite{AF}. Please check that before asking for assistance. - -If you encounter difficulties in preparing or submitting your -manuscript in electronic form after it has been accepted for -publication by the appropriate editorial board, you can ask for help -from the \AMS\ at: - -\penalty-100 -\begin{samepage} -\beginexample{\normalfont\mdseries} -Technical Support -Publications Technical Group -201 Charles Street -Providence, RI 02904-2294 -\vspace{3pt} -Phone: 800-321-4267, ext.\ 4080 \quad or \quad 401-455-4080 -E-mail: {\texttt{tech-support@ams.org}} -\endexample -\end{samepage} - -\noindent -Please supply the name of the journal or book series, the editor's -name if the manuscript is for a proceedings volume, and a concise -explanation of the problem. - - -\begin{thebibliography}{[ASMR]} - -\bibitem[AF]{AF} AMS Author FAQ, -\texttt{http://www.ams.org/authors/author-faq.html} - -\bibitem[AFG]{AFG} \textit{AMSFonts{} version~\textup{2.2d} user's guide}, -Amer. Math. Soc., Providence, RI, 2002. -PDF file linked from \texttt{http://www.ams.org/tex/amsfonts.html} - -\bibitem[AMP]{AMP} \textit{User's guide for the \pkg{amsmath} package -\textup{(}version~\textup{2.0)}}, Amer. Math. Soc., Providence, RI, 2004. -PDF file linked from \texttt{http://www.ams.org/tex/amslatex.html} - -\bibitem[AP]{AP} Author packages for publishing with the AMS,\\ -\texttt{http://www.ams.org/tex/author-info.html} - -\bibitem[ARC]{ARC} AMS Author Resource Center, -\texttt{http://www.ams.org/authors/} - -\bibitem[ASMR]{ASMR} \textit{Abbreviations of names of serials reviewed in -Mathematical Reviews}, Amer. Math. Soc., Providence, RI, -revised annually; searchable on-line at\\ -\texttt{http://www.ams.org/msnhtml/serials-list/annser\_frames.html}. - -\bibitem[ATP]{ATP} \textit{Using the \pkg{amsthm} package, -version~\textup{2.0}}, Amer. Math. Soc., Providence, RI, 2004.\\ -PDF file linked from \texttt{http://www.ams.org/tex/amslatex.html} - -\bibitem[EG]{EG} Keith Reckdahl, ``Using EPS graphics in \latexe/ -documents'', available in electronic form as \texttt{info/epslatex.ps} -or \filnam{.pdf} from\newline -\texttt{http://www.ctan.org/tex-archive/} - -\bibitem[EP]{EP} Guide to AMS editor's package, -\texttt{http://www.ams.org/authors/editpkg.html} - -\bibitem[GB]{GB} David Carlisle, ``Packages in the `graphics' bundle'', -available in electronic form as -\filnam{macros/latex/required/graphics/grfguide.tex} or \filnam{.ps} -from\\ \texttt{http://www.ctan.org/tex-archive/} - -\bibitem[GL]{GL} Helmut Kopka and Patrick Daly, \textit{A Guide to - \latex/}, 4th ed., Addison-Wesley, Reading, MA, 2004. - -\bibitem[HBW]{HBW} Nicholas J. Higham, \textit{Handbook of Writing for -the Mathematical Sciences}, 2nd ed., SIAM, Philadelphia, PA, 1998. - -\bibitem[HWM]{HWM} -Norman E. Steenrod, Paul R. Halmos, Menahem M. Schiffer, and Jean A. -Dieudonn\'e, \textit{How to Write Mathematics}, 5th printing 1995, -Amer. Math. Soc., Providence, RI, 1973. - -\bibitem[Joy]{Joy} M. D. Spivak, \textit{The Joy of \tex/}, -2nd revised ed., Amer. Math. Soc., Providence, RI, 1990. - -\bibitem[LC]{LC} Frank Mittelbach and Michel Goossens, with -Johannes Braams, David Carlisle and Chris Rowley, -\textit{The \latex/ Companion}, 2nd ed., Addison-Wesley Co., -Reading, MA, 2004. - -\bibitem[LGC]{LGC} Michel Goossens, Sebastian Rahtz, and Frank Mittelbach, -\textit{The \latex/ graphics Companion}, Addison-Wesley Co., Reading, -MA, 1997. - -\bibitem[MIT]{MIT} Ellen E. Swanson, updated by Arlene O'Sean and -Antoinette Schleyer, \textit{Mathematics into Type}, -Updated ed., Amer. Math. Soc., Providence, RI, 1999. - -\bibitem[ML]{ML} George Gr\"{a}tzer, \textit{Math into \latex/}, -3rd ed., Birkh\"{a}user, Boston, MA/Springer Verlag, NY, 2000. - -\bibitem[MSC]{MSC} \textit{\textup{2000} Mathematics subject classification}, -Amer. Math. Soc., Providence, RI, 1999; searchable on-line at -\texttt{http://www.ams.org/msc/}. - -\end{thebibliography} - -\end{document} diff --git a/Master/texmf-dist/source/latex/amscls/thmtest.tex b/Master/texmf-dist/source/latex/amscls/thmtest.tex index 21193949e83..d097f1e00bc 100644 --- a/Master/texmf-dist/source/latex/amscls/thmtest.tex +++ b/Master/texmf-dist/source/latex/amscls/thmtest.tex @@ -1,42 +1,34 @@ -%%% ==================================================================== -%%% @LaTeX-file{ -%%% filename = "thmtest.tex", -%%% version = "2.01", -%%% date = "2004/08/02", -%%% time = "14:18:27 EDT", -%%% checksum = "26819 255 963 8277", -%%% author = "American Mathematical Society", -%%% copyright = "Copyright 1996, 2004 American Mathematical Society, -%%% all rights reserved. Copying of this file is -%%% authorized only if either: -%%% (1) you make absolutely no changes to your copy, -%%% including name; OR -%%% (2) if you do make changes, you first rename it -%%% to some other name.", -%%% address = "American Mathematical Society, -%%% Technical Support, -%%% Publications Technical Group, -%%% 201 Charles Street, -%%% Providence, RI 02904, -%%% USA", -%%% telephone = "401-455-4080 or (in the USA and Canada) -%%% 800-321-4AMS (321-4267)", -%%% FAX = "401-331-3842", -%%% email = "tech-support@ams.org (Internet)", -%%% codetable = "ISO/ASCII", -%%% supported = "yes", -%%% keywords = "latex, amslatex, ams-latex, theorem, proof", -%%% abstract = "This is part of the AMS-\LaTeX{} distribution. -%%% It is a sample document illustrating the use of -%%% the amsthm package.", -%%% docstring = "The checksum field above contains a CRC-16 -%%% checksum as the first value, followed by the -%%% equivalent of the standard UNIX wc (word -%%% count) utility output of lines, words, and -%%% characters. This is produced by Robert -%%% Solovay's checksum utility.", -%%% } -%%% ==================================================================== +%% filename: thmtest.tex +%% version: 2.01 +%% date: 2004/08/02 +%% +%% American Mathematical Society +%% Technical Support +%% Publications Technical Group +%% 201 Charles Street +%% Providence, RI 02904 +%% USA +%% tel: (401) 455-4080 +%% (800) 321-4267 (USA and Canada only) +%% fax: (401) 331-3842 +%% email: tech-support@ams.org +%% +%% Copyright 1996, 2004, 2010 American Mathematical Society. +%% +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ==================================================================== %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Option test file, will be created during the first LaTeX run; diff --git a/Master/texmf-dist/tex/latex/amscls/amsart.cls b/Master/texmf-dist/tex/latex/amscls/amsart.cls index 4fb905af843..0291b25c074 100644 --- a/Master/texmf-dist/tex/latex/amscls/amsart.cls +++ b/Master/texmf-dist/tex/latex/amscls/amsart.cls @@ -8,7 +8,7 @@ %% %% This is a generated file. %% -%% Copyright 1995, 199, 2004, 2009, 2015 American Mathematical Society. +%% Copyright 1995, 199, 2004, 2009, 2015, 2017 American Mathematical Society. %% %% American Mathematical Society %% Technical Support @@ -21,14 +21,24 @@ %% fax: (401) 331-3842 %% email: tech-support@ams.org %% -%% Unlimited copying and redistribution of this file are permitted as -%% long as this file is not modified. Modifications, and distribution -%% of modified versions, are permitted, but only if the resulting file -%% is renamed. +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ======================================================================== %% \NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) [1995/06/01]% LaTeX date must be June 1995 or later -\ProvidesClass{amsart}[2015/03/04 v2.20.2] +\ProvidesClass{amsart}[2017/10/31 v2.20.4] \global\expandafter\let\csname ver@amsthm.sty\expandafter\endcsname \csname ver@\@currname.\@currext\endcsname \let\@xp=\expandafter @@ -510,7 +520,7 @@ \ifx\@empty\addresses \else\@setaddresses\fi} \AtEndDocument{\enddoc@text} \def\curraddrname{{\itshape Current address}} -\def\emailaddrname{{\itshape E-mail address}} +\def\emailaddrname{{\itshape Email address}} \def\urladdrname{{\itshape URL}} \def\@setaddresses{\par \nobreak \begingroup @@ -1822,9 +1832,13 @@ \mark{\@themark}}% \if@nobreak\ifvmode\nobreak\fi\fi} \def\@markleft#1#2#3{\gdef\@themark{{#3}{#2}}} -\def\@tempa{} -\edef\@dh{% - \noexpand\mathhexbox{\hexnumber@\symAMSb}67} +\@ifundefined{symAMSb}{% + \def\@dh{dh}% + \ClassWarning{\@classname}{\string\dh\space unavailable without amsfonts; + replaced by 'dh'}% +}{% + \edef\@dh{\noexpand\mathhexbox{\hexnumber@\symAMSb}67}% +} \DeclareTextCommand{\dh}{OT1}{% \edef\@tempb{\scdefault}% \ifx\f@shape\@tempb diff --git a/Master/texmf-dist/tex/latex/amscls/amsbook.cls b/Master/texmf-dist/tex/latex/amscls/amsbook.cls index f70f2496ef5..2a56e401f9f 100644 --- a/Master/texmf-dist/tex/latex/amscls/amsbook.cls +++ b/Master/texmf-dist/tex/latex/amscls/amsbook.cls @@ -8,7 +8,7 @@ %% %% This is a generated file. %% -%% Copyright 1995, 199, 2004, 2009, 2015 American Mathematical Society. +%% Copyright 1995, 199, 2004, 2009, 2015, 2017 American Mathematical Society. %% %% American Mathematical Society %% Technical Support @@ -21,14 +21,24 @@ %% fax: (401) 331-3842 %% email: tech-support@ams.org %% -%% Unlimited copying and redistribution of this file are permitted as -%% long as this file is not modified. Modifications, and distribution -%% of modified versions, are permitted, but only if the resulting file -%% is renamed. +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ======================================================================== %% \NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) [1995/06/01]% LaTeX date must be June 1995 or later -\ProvidesClass{amsbook}[2015/03/04 v2.20.2] +\ProvidesClass{amsbook}[2017/10/31 v2.20.4] \global\expandafter\let\csname ver@amsthm.sty\expandafter\endcsname \csname ver@\@currname.\@currext\endcsname \let\@xp=\expandafter @@ -459,7 +469,7 @@ \@ifnotempty{#1}{\g@addto@macro\thankses{\thanks{#1}}}% } \def\curraddrname{{\itshape Current address}} -\def\emailaddrname{{\itshape E-mail address}} +\def\emailaddrname{{\itshape Email address}} \def\urladdrname{{\itshape URL}} \def\@setaddresses{\par \nobreak \begingroup @@ -1771,9 +1781,13 @@ \mark{\@themark}}% \if@nobreak\ifvmode\nobreak\fi\fi} \def\@markleft#1#2#3{\gdef\@themark{{#3}{#2}}} -\def\@tempa{} -\edef\@dh{% - \noexpand\mathhexbox{\hexnumber@\symAMSb}67} +\@ifundefined{symAMSb}{% + \def\@dh{dh}% + \ClassWarning{\@classname}{\string\dh\space unavailable without amsfonts; + replaced by 'dh'}% +}{% + \edef\@dh{\noexpand\mathhexbox{\hexnumber@\symAMSb}67}% +} \DeclareTextCommand{\dh}{OT1}{% \edef\@tempb{\scdefault}% \ifx\f@shape\@tempb diff --git a/Master/texmf-dist/tex/latex/amscls/amsproc.cls b/Master/texmf-dist/tex/latex/amscls/amsproc.cls index b7a962a8bba..ae20de3e3ec 100644 --- a/Master/texmf-dist/tex/latex/amscls/amsproc.cls +++ b/Master/texmf-dist/tex/latex/amscls/amsproc.cls @@ -8,7 +8,7 @@ %% %% This is a generated file. %% -%% Copyright 1995, 199, 2004, 2009, 2015 American Mathematical Society. +%% Copyright 1995, 199, 2004, 2009, 2015, 2017 American Mathematical Society. %% %% American Mathematical Society %% Technical Support @@ -21,14 +21,24 @@ %% fax: (401) 331-3842 %% email: tech-support@ams.org %% -%% Unlimited copying and redistribution of this file are permitted as -%% long as this file is not modified. Modifications, and distribution -%% of modified versions, are permitted, but only if the resulting file -%% is renamed. +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ======================================================================== %% \NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) [1995/06/01]% LaTeX date must be June 1995 or later -\ProvidesClass{amsproc}[2015/03/04 v2.20.2] +\ProvidesClass{amsproc}[2017/10/31 v2.20.4] \global\expandafter\let\csname ver@amsthm.sty\expandafter\endcsname \csname ver@\@currname.\@currext\endcsname \let\@xp=\expandafter @@ -488,7 +498,7 @@ \ifx\@empty\addresses \else\@setaddresses\fi} \AtEndDocument{\enddoc@text} \def\curraddrname{{\itshape Current address}} -\def\emailaddrname{{\itshape E-mail address}} +\def\emailaddrname{{\itshape Email address}} \def\urladdrname{{\itshape URL}} \def\@setaddresses{\par \nobreak \begingroup @@ -1758,9 +1768,13 @@ \mark{\@themark}}% \if@nobreak\ifvmode\nobreak\fi\fi} \def\@markleft#1#2#3{\gdef\@themark{{#3}{#2}}} -\def\@tempa{} -\edef\@dh{% - \noexpand\mathhexbox{\hexnumber@\symAMSb}67} +\@ifundefined{symAMSb}{% + \def\@dh{dh}% + \ClassWarning{\@classname}{\string\dh\space unavailable without amsfonts; + replaced by 'dh'}% +}{% + \edef\@dh{\noexpand\mathhexbox{\hexnumber@\symAMSb}67}% +} \DeclareTextCommand{\dh}{OT1}{% \edef\@tempb{\scdefault}% \ifx\f@shape\@tempb diff --git a/Master/texmf-dist/tex/latex/amscls/amsthm.sty b/Master/texmf-dist/tex/latex/amscls/amsthm.sty index 6a6805e1bd3..72a8a38ecc3 100644 --- a/Master/texmf-dist/tex/latex/amscls/amsthm.sty +++ b/Master/texmf-dist/tex/latex/amscls/amsthm.sty @@ -8,7 +8,7 @@ %% %% This is a generated file. %% -%% Copyright 1995, 199, 2004, 2009, 2015 American Mathematical Society. +%% Copyright 1995, 199, 2004, 2009, 2015, 2017 American Mathematical Society. %% %% American Mathematical Society %% Technical Support @@ -21,14 +21,24 @@ %% fax: (401) 331-3842 %% email: tech-support@ams.org %% -%% Unlimited copying and redistribution of this file are permitted as -%% long as this file is not modified. Modifications, and distribution -%% of modified versions, are permitted, but only if the resulting file -%% is renamed. +%% This work may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.3c +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.3c or later is part of all distributions of LaTeX +%% version 2005/12/01 or later. +%% +%% This work has the LPPL maintenance status `maintained'. +%% +%% The Current Maintainer of this work is the American Mathematical +%% Society. +%% +%% ======================================================================== %% \NeedsTeXFormat{LaTeX2e}% LaTeX 2.09 can't be used (nor non-LaTeX) [1995/06/01]% LaTeX date must be June 1995 or later -\ProvidesPackage{amsthm}[2015/03/04 v2.20.2] +\ProvidesPackage{amsthm}[2017/10/31 v2.20.4] \let\@xp=\expandafter \let\@nx=\noexpand \def\@oparg#1[#2]{\@ifnextchar[{#1}{#1[#2]}} -- cgit v1.2.3