From 7e08d392169c4b4538805d502da8394929916fe1 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Fri, 25 Apr 2008 17:41:23 +0000 Subject: rm shortlst git-svn-id: svn://tug.org/texlive/trunk@7657 c570f23f-e606-0410-a88d-b1316a301751 --- Master/texmf-dist/doc/latex/shortlst/shortlst.dvi | Bin 34800 -> 0 bytes .../texmf-dist/source/latex/shortlst/shortlst.dtx | 794 --------------------- .../texmf-dist/source/latex/shortlst/shortlst.ins | 18 - Master/texmf-dist/tex/latex/shortlst/shortlst.sty | 133 ---- Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc | 1 - Master/tlpkg/tlpsrc/shortlst.tlpsrc | 2 - 6 files changed, 948 deletions(-) delete mode 100644 Master/texmf-dist/doc/latex/shortlst/shortlst.dvi delete mode 100644 Master/texmf-dist/source/latex/shortlst/shortlst.dtx delete mode 100644 Master/texmf-dist/source/latex/shortlst/shortlst.ins delete mode 100644 Master/texmf-dist/tex/latex/shortlst/shortlst.sty delete mode 100644 Master/tlpkg/tlpsrc/shortlst.tlpsrc diff --git a/Master/texmf-dist/doc/latex/shortlst/shortlst.dvi b/Master/texmf-dist/doc/latex/shortlst/shortlst.dvi deleted file mode 100644 index 66efd16bb42..00000000000 Binary files a/Master/texmf-dist/doc/latex/shortlst/shortlst.dvi and /dev/null differ diff --git a/Master/texmf-dist/source/latex/shortlst/shortlst.dtx b/Master/texmf-dist/source/latex/shortlst/shortlst.dtx deleted file mode 100644 index 74a6b7773f5..00000000000 --- a/Master/texmf-dist/source/latex/shortlst/shortlst.dtx +++ /dev/null @@ -1,794 +0,0 @@ -% \iffalse -% This is the shortlst package -% Copyright 1998 by Mogens Lemvig Hansen -% Run this file through LaTeX and read the documentation in shortlst.dvi -% \fi -% \CheckSum{366} -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} -% -% \def\fileversion{1.1} \def\filedate{1998/11/27} \def\docdate{\filedate} -% \title{The \textsf{shortlst} Package\thanks{This file describes version -% \fileversion, \filedate, which is a bug-fix release containing no new -% functionality since version 1.0.}} -% \author{\copyright\ Mogens Lemvig Hansen\\mlhansen@uniserve.com} -% \date{\docdate} -% \maketitle -% \begin{abstract} -% The \textsf{shortlst} package provides environments similar -% to \textsf{itemize} and \textsf{enumerate} designed especially -% for lists of short items. -% \end{abstract} -% -% \tableofcontents -% -% \section{The Basics} -% When you have a list of short items, the regular \textsf{itemize} -% environment leaves -% \begin{itemize} -% \item a lot -% \item of -% \item white -% \item space. -% \end{itemize} -% The obvious alternative is to use a \textsf{tabular}, but tables are -% difficult to type and harder to edit if you decide to interchange two items. -% \DescribeEnv{shortitemize} -% This package allows you to type input very similar to \textsf{itemize} -% input. -% \begin{verbatim} -% \begin{shortitemize} -% \item the \textsf{itemize} environment -% \item leaves -% \item a lot -% \item of -% \item white space -% \end{shortitemize} -% \end{verbatim} -% The code above yields output like\footnote{All ``output'' in this document -% is simulated since you probably did not install the \textsf{shortlst} -% package before \LaTeX ing the documentation. The \emph{real} output is -% nicer\dots} this: -% \newlength\mlh -% \begin{quote}\raggedright\setlength\mlh{65pt} -% \makebox[2\mlh][l]{$\bullet$\hspace{\labelsep}the \textsf{itemize} -% environment}\ignorespaces -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}leaves}\\ -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}a lot}\ignorespaces -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}of}\ignorespaces -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}white space} -% \end{quote} -% Above, \LaTeX\ decided that the first item needs twice as much space as the -% other items. You may give an optional argument to the \textsf{shortitemize} -% environment specifying the width of the default allotment of space. -% \begin{verbatim} -% \begin{shortitemize}[the \textsf{itemize} environment] -% \end{verbatim} -% Now each item gets as much space as the first. -% \begin{quote}\raggedright -% \settowidth\mlh{the \textsf{itemize} environment}% -% \addtolength\mlh{2\labelsep}\addtolength\mlh\labelwidth -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}the \textsf{itemize} -% environment}% -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}leaves}\\% -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}a lot}% -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}of}\\% -% \makebox[\mlh][l]{$\bullet$\hspace{\labelsep}white space}% -% \end{quote} -% -% You may not put any list environment inside a -% \textsf{shortitemize} environment---but a \textsf{shortitemize} environment -% can be (part of) an item of a regular list environment. -% If you put a \textsf{shortitemize} environment inside a regular -% \textsf{itemize} environment, \textsf{shortitemize} will use the next level -% of labels. -% \DescribeMacro{\item} -% You may use the optional argument to \verb:\item: to override -% the label---just as for the regular \textsf{itemize} environment. -% -% \DescribeEnv{shortenumerate} -% The \textsf{shortlst} package also provides a \textsf{shortenumerate} -% environment. You may use \textsf{shortenumerate} in the same way as -% \textsf{shortitemize}, \emph{mutatis mutandis}. -% \begin{verbatim} -% \begin{enumerate} -% \item An item. -% \item This item contains a sub-list: -% \begin{shortenumerate} -% \item One -% \item[\%] One and a half -% \item Two -% \item \label{here}Three -% \end{shortenumerate} -% \item Back in the outer list. -% \end{enumerate} -% \end{verbatim} -% The code above yields this output: -% \begin{enumerate} -% \item An item. -% \item \label{here}This item contains a sub-list: -% \begin{quote}\raggedright\setlength\mlh{1.2in} -% \makebox[\mlh][l]{(a)\hspace{\labelsep}One}% -% \makebox[\mlh][l]{\%\hspace{\labelsep}One and a half}% -% \makebox[\mlh][l]{(b)\hspace{\labelsep}Two}% -% \makebox[\mlh][l]{(c)\hspace{\labelsep}Three}% -% \end{quote} -% \item Back in the outer list. -% \end{enumerate} -% Now you may use \verb:\ref{here}: to refer to item \ref{here}(c) in the -% usual manner. -% -% \DescribeEnv{runenumerate} -% Some lists do not deserve a displayed paragraph. For such you may use the -% \textsf{runenumerate} environment. -% \begin{verbatim} -% You have three choices: -% \begin{runenumerate} -% \item wash you hands, -% \item postpone it until tomorrow, or -% \item \label{choice}stay dirty. -% \end{runenumerate} -% I choose \ref{choice}! -% \end{verbatim} -% Here is then the output: -% \begin{quotation}\setlength\mlh{1em plus .5em minus .5em} -% You have three choices: -% \mbox{1.\hspace\labelsep}wash you hands,\hspace\mlh -% \mbox{2.\hspace\labelsep}postpone it until tomorrow, or\hspace\mlh -% \mbox{3.\hspace\labelsep}stay dirty.\hspace\mlh -% I choose 3! -% \end{quotation} -% The main advantage of the \textsf{runenumerate} environment is the automatic -% (and nested) numbering and cross references. -% \DescribeEnv{runitemize} -% For completeness, the \textsf{shortlst} package also provides a -% \textsf{runitemize} environment. -% -% \section{The Parameters} -% -% \DescribeMacro{\runitemsep} -% The length \verb:\runitemsep: stores the space -% between items of a \textsf{runenumerate} or \textsf{runitemize} -% environment. Here is the default value: -% \begin{verbatim} -% \setlength{\runitemsep}{1em plus .5em minus .5em} -% \end{verbatim} -% -% \DescribeMacro{\labelsep} -% All four environments, \textsf{shortitemize}, \textsf{shortenumerate}, -% \textsf{runitemize}, and \textsf{runenumerate} use \verb:\labelsep: (from -% the \LaTeX\ kernel, see \cite[p.~113]{LaTeXbook}, \cite[p.~62]{companion}, -% or \cite{ltlists}) for the space between the label and -% the item itself. The two short-list environments use the same space as the -% minimal space between one item and the next label. -% -% \DescribeMacro{\labelwidth} -% The labels of the \textsf{shortitemize} and \textsf{shortenumerate} -% environments may overlap the previous item if the length \verb:\labelwidth: -% (from the \LaTeX\ kernel, see \cite[p.~113]{LaTeXbook}, -% \cite[p.~62]{companion}, or \cite{ltlists}) is too small. -% -% \DescribeMacro{\shortitemwidth} -% Instead of giving optional arguments to each \textsf{shortitemize} and -% \textsf{shortitemize} environment, you may change the length -% \verb:\shortitemwidth:, which stores the default width of each item (without -% the label and a bit of space on each side). -% \begin{verbatim} -% \setlength{\shortitemwidth}{65pt} -% \end{verbatim} -% Inside a \textsf{shortitemize} or \textsf{shortenumerate} environment -% \verb:\shortitemwidth: is the width of the optional argument to the -% environment. Thus you may use -% \verb:\parbox[t]{\shortitemwidth}{:\meta{paragraph}\verb:}: to typeset a -% long item. -% \begin{verbatim} -% \begin{shortenumerate}[A little paragraph] -% \item A short item -% \item \parbox[t]{\shortitemwidth}{A little paragraph -% that\footnote{To parbox} will be too long to fit on one line -% no matter what\strut.} -% \item Another short -% \item \newlength{\mylength}% -% \setlength{\mylength}{2\shortitemwidth}% -% \addtolength{\mylength}{2\labelsep}% -% \addtolength{\mylength}{\labelwidth}% -% \begin{minipage}[t]{\mylength} -% A little paragraph that\footnote{To minipage} -% will be too long to fit on one line no matter what. -% \end{minipage} -% \item Bla -% \item Bla -% \end{shortenumerate} -% \end{verbatim} -% The \verb:\strut: on the last line of the \verb:\parbox: improves the -% spacing between the \verb:\parbox: and the following line. -% \begin{quote} -% \raggedright -% \newlength\mylength -% \settowidth\mylength{A little paragraph} -% \setlength\mlh{100pt} -% \makebox[\mlh][l]{1.\hspace\labelsep A short item}^^A -% \makebox[\mlh][l]{2.\hspace\labelsep \parbox[t]{\mylength}{A little -% paragraph that\footnotemark{} will be too long to fit on one line -% no matter what.\strut}}\footnotetext{To parbox}^^A -% \makebox[\mlh][l]{3.\hspace\labelsep Another short}\\ -% \makebox[2\mlh][l]{4.\hspace\labelsep -% \begin{minipage}[t]{180pt} -% A little paragraph that\footnote{To minipage} -% will be too long to fit on one line -% no matter what. -% \end{minipage}}^^A -% \makebox[\mlh][l]{5.\hspace\labelsep Bla}\\ -% \makebox[\mlh][l]{6.\hspace\labelsep Bla}^^A -% \end{quote} -% -% -% \section{The Limitations} -% \begin{itemize} -% \item The \textsf{shortitemize} and \textsf{shortenumerate} environments -% cannot contain any list environment. These include \textsf{shortitemize}, -% \textsf{shortenumerate}, \textsf{itemize}, \textsf{enumerate}, -% \textsf{description}, \textsf{quote}, \textsf{quotation}, \textsf{verse}, -% \textsf{center}, \textsf{flushleft}, \textsf{flushright}, -% \textsf{verbatim}\footnote{But \texttt{\bslash verb} is ok.}, -% \textsf{tabbing}, \textsf{trivlist}, \textsf{list}, and all environments -% made with \verb:\newtheorem:. -% -% \item All four environments handle footnotes\footnote{In the case of -% \textsf{shortitemize} and \textsf{shortenumerate} due to a technique found -% in the \textsf{tabularx} package by David Carlisle -% \cite[code lines 121--127]{tabularx}.}; -% however, the \textsf{shortitemize} and \textsf{shortenumerate} environments -% do not handle other types of floats. -% -% \item The \textsf{shortitemize} and \textsf{shortenumerate} environments -% cannot handle items that are longer than one line; use \verb:\parbox: or the -% \textsf{minipage} environment---with the implications that has on footnotes. -% -% \item The \textsf{shortlst} package does not define a version of the -% \textsf{description} environment because I do not know what it should do. -% -% \item You cannot use the \verb:\label: command if your -% \textsf{shortenumerate} or \textsf{runenumerate} environment is nested -% inside a \textsf{tabularx} environment. -% -% \item All four environments defined by the \textsf{shortlst} package make -% (parts of) paragraphs not boxes. If you want your list centred, you must -% therefore include it in a \verb:\parbox: (or \textsf{minipage}) and centre -% the box. -% -% \end{itemize} -% -% -% \section{The Alternatives} -% \begin{description} -% \item[multiple columns] -% You may use the regular \textsf{itemize} and \textsf{enumerate} environments -% in a multi-column format. The \textsf{multicol} package \cite{multicol} -% creates multiple columns very nicely. The items end up ordered vertically -% where this package orders them horizontally. -% -% \item[\textsf{tabular}] -% You can put your items in a table---but such are difficult to edit and you -% do not get automatic numbering and cross references. -% -% \item[\textsf{multienum}] -% The \textsf{multienum} package \cite{multienum} provides an environment -% similar to \textsf{shortenumerate}. However, the input syntax is more -% similar to \textsf{tabular} than to \textsf{enumerate}. -% -% \item[\textsf{paralist}] -% The \textsf{paralist} package \cite{paralist} provides environments -% similar to \textsf{runitemize} and \textsf{runenumerate} except that -% nesting inside \textsf{itemize} or \textsf{enumerate} is not considered. -% -% \end{description} - -% -% -% \section{The Copyright} -% \begin{itemize} -% \item -%% You may use this software. -% \item -%% You may copy this software and the documentation for your own use. -% \item -%% You may distribute the file \texttt{shortlst.dtx} to others provided -%% you do not make a profit doing so. -% \item -%% You may modify my code and the documentation---including incorporating -%% it into your own work---provided you do not make a profit on my work -%% or allow others to. -% \end{itemize} -% -% -% \section{The Installation} -% \begin{itemize} -% \item Run the file \texttt{shortlst.dtx} through \LaTeX\ (thrice to resolve -% cross references\footnote{If you want an index you must run MakeIndex -% (\texttt{makeindex -s gind.ist shortlst}) between the second and third -% \LaTeX{} run.}). -% \begin{verbatim} -% latex shortlst.dtx -% \end{verbatim} -% \item Run the file \texttt{shortlst.ins} which now exists through \LaTeX. -% \begin{verbatim} -% latex shortlst.ins -% \end{verbatim} -% \item You now have to decide what to do with several files. -% \begin{itemize} -% \item You may now have to move the file \texttt{shortlst.sty} to some -% directory where \LaTeX\ can find it; \texttt{texmf/tex/latex/misc} would be -% the natural choice~\cite{tds}. -% \item Move the documentation, \texttt{shortlst.dvi}, to -% \texttt{texmf/doc/latex/misc}. -% \item You may discard the source file, \texttt{shortlst.dtx}, or store it in -% the directory \texttt{texmf/source/latex/misc}. -% \item Discard all remaining \texttt{shortlst.*} files. -% \end{itemize} -% \end{itemize} -% -%\StopEventually{ -% \bibliographystyle{is-plain} -% ^^A\bibliography{tex} -% \begin{thebibliography}{1} -% -% \bibitem{ltlists} -% Johannes Braams, David Carlisle, Alan Jeffrey, Leslie Lamport, Frank -% Mittelbach, Tobias Oetiker, Chris Rowley, and Rainer Sch{\"{o}}pf. -% \newblock {\em ltlists.dtx}. -% \newblock CTAN, 1997/02/21 edition, 1997. -% -% \bibitem{tabularx} -% David Carlisle. -% \newblock {\em The \textsf{tabularx} Package}. -% \newblock CTAN, 1997/09/18 v2.05 edition, 1997. -% -% \bibitem{ltboxes} -% David Carlisle, Leslie Lamport, Frank Mittelbach, and Chris Rowley. -% \newblock {\em ltboxes.dtx}. -% \newblock CTAN, 1998/06/05 edition, 1998. -% -% \bibitem{companion} -% Michel Goossens, Frank Mittelbach, and Alexander Samarin. -% \newblock {\em The {\LaTeX} Companion}. -% \newblock Addison-Wesley, 1994. -% \newblock ISBN 0-201-54199-8. -% -% \bibitem{multienum} -% Dennis Kletzing. -% \newblock {\em A Multienumerate Package}. -% \newblock CTAN. -% \newblock The author does not provide a version number. -% -% \bibitem{LaTeXbook} -% Leslie Lamport. -% \newblock {\em {\LaTeX}, A Document Preparation System, User's Guide and -% Reference Manual}. -% \newblock Addison-Wesley, second edition, 1994. -% \newblock ISBN 0-201-52983-1. -% -% \bibitem{multicol} -% Frank Mittelbach. -% \newblock {\em An environment for multicolumn output}. -% \newblock CTAN, 1997/12/16 v1.5p edition, 1997. -% -% \bibitem{paralist} -% Bernd Schandl. -% \newblock {\em \textsf{paralist}, Enumerate and Itemize as and within -% Paragraphs}. -% \newblock CTAN, 1998/10/11 v1.0 edition. -% -% \bibitem{tds} -% {TUG Working Group on a {\TeX} Directory Structure (TWG-TDS)}. -% \newblock {\em A Directory Structure for {\TeX} Files}. -% \newblock CTAN, version 0.9995, january 26, 1998 edition, 1998. -% -% \end{thebibliography} -% \PrintIndex -%} -% -% -% \section{The Driver} -% The following few lines of code allow \LaTeX\ to generate -% the \texttt{.sty} file and the documentation from this source. -% First, a \textsf{filecontents} environment creates the installation script, -% \texttt{shortlst.ins}, for \textsc{DocStrip}. -% \begin{macrocode} -%<*docstrip> -\begin{filecontents}{shortlst.ins} -\input docstrip.tex -\preamble - The shortlst Package - Copyright 1998 by Mogens Lemvig Hansen - mlhansen@uniserve.com -\endpreamble -% \end{macrocode} -% I think that \texttt{shortlst.sty} should go into the directory -% \texttt{tex/latex/misc}; however, \textsc{DocStrip} will not heed my advise -% unless your configuration file, \texttt{docstrip.cfg}, allows it to. -% \begin{macrocode} -\usedir{tex/latex/misc} -\generate{\file{shortlst.sty}{\from{shortlst.dtx}{package}}} -\endbatchfile -\end{filecontents} -% -% \end{macrocode} -% Then the driver to typeset the documentation. -% \begin{macrocode} -%<*docdriver> -\documentclass{ltxdoc}[1996/01/11] -\CodelineIndex%\EnableCrossrefs -\begin{document} \DocInput{shortlst.dtx} \end{document} -% -% \end{macrocode} -% -% -% \section{The Implementation} -% -% Declare the package name. I made this package with the December 1997 -% version of \LaTeX; it may work with earlier versions. -% \begin{macrocode} -%<*package> -\NeedsTeXFormat{LaTeX2e}[1997/12/01] -\ProvidesPackage{shortlst} - [1998/11/27 version 1.1] -% \end{macrocode} -% -% \subsection{The run-in lists} -% \begin{macro}{\runitemsep} -% Run-in items are separated by the length \verb:\runitemsep:. The same -% amount of space is also placed before the first item and after the last. -% \begin{macrocode} -\newlength\runitemsep -\setlength\runitemsep{1em plus .5em minus .5em} -% \end{macrocode} -% \end{macro} -% -% \begin{environment}{runitemize} -% The \textsf{runitemize} environment first checks if the current level of -% nesting of \textsf{itemize}-like environments is shallow enough to proceed. -% \begin{macrocode} -\newenvironment{runitemize}{% - \ifnum \@itemdepth >\thr@@\@toodeep\else - \advance\@itemdepth\@ne -% \end{macrocode} -% Define the default label, \verb:\@itemlabel:, as \verb:\labelitem:\meta{i} -% which expand to the bullet, dash, etc.\ used by \textsf{itemize}. -% \begin{macrocode} - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% - \def\@itemlabel{\csname\@itemitem\endcsname}% -% \end{macrocode} -% The regular \verb:\item: command calls \verb:\@item:, so make it use a -% custom version. -% \begin{macrocode} - \let\@item\run@item -% \end{macrocode} -% Disable \verb:\par: inside the \textsf{runitemize} environment, ignore -% spaces following the \verb:\begin{runitemize}:, and close the \verb:\ifnum: -% at the beginning of this definition. -% \begin{macrocode} - \let\par\relax - \ignorespaces\fi} -% \end{macrocode} -% At the end of the \textsf{runitemize} environment you must remove the space -% (if any) between the last item and the \verb:\end{runitemize}:; replace it -% by \verb:\runitemsep: amount of space. Then ignore spaces following the -% \verb:\end{runitemize}:. -% \begin{macrocode} - {\unskip\hspace\runitemsep\ignorespacesafterend} -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{runenumerate} -% The definition of the \textsf{runenumerate} environment is similar to that -% of the \textsf{runitemize} environment. -% \begin{macrocode} -\newenvironment{runenumerate}{% - \ifnum \@enumdepth >\thr@@\@toodeep\else - \advance\@enumdepth\@ne -% \end{macrocode} -% The call to \verb:\usecounter{enum:\meta{i}\verb:}: sets \verb:\if@nmbrlist: -% true and defines \verb:\@listctr: as \verb:enum:\meta{i} which is the -% counter used by the \textsf{enumerate} environment at this level. -% \begin{macrocode} - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \usecounter{\@enumctr}% -% \end{macrocode} -% Define the default label, \verb:\@itemlabel:, as \verb:\labelenum:\meta{i}. -% \begin{macrocode} - \def\@itemlabel{\csname label\@enumctr \endcsname}% - \let\@item\run@item - \let\par\@empty - \ignorespaces\fi} - {\unskip\hspace\runitemsep\ignorespacesafterend} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\run@item} -% The regular \verb:\item: command checks if it has an optional argument, -% stores the answer in \verb:\if@noitemarg:, and calls \verb:\@item: or -% \verb:\@item[\@itemlabel]: as appropriate. The \verb:\run@item: command is -% the custom version of \verb:\@item: for the run-in list environments. -% -% First remove the space (if any) between the last item and this one; replace -% it by \verb:\runitemsep: amount of space. However, this could be the first -% item of a list which is the first object in a paragraph. In that case, just -% begin a new paragraph. -% \begin{macrocode} -\def\run@item[#1]{% - \ifhmode\unskip\hspace\runitemsep\else\leavevmode\fi -% \end{macrocode} -% If the \verb:\item: had no optional argument and if this is a numbered list, -% increment the counter. -% \begin{macrocode} - \if@noitemarg - \@noitemargfalse - \if@nmbrlist\refstepcounter{\@listctr}\fi - \fi -% \end{macrocode} -% Set the label. -% \begin{macrocode} - \mbox{#1}\kern\labelsep\ignorespaces} -% \end{macrocode} -% \end{macro} -% -% \subsection{The short-lists} -% \begin{macro}{\shortitemwidth} -% The idea is to typeset each item in a box of width -% ``a multiple of a fixed length.'' \TeX\ will then stack the boxes so that -% they line up nicely. -% The default ``fixed length'' is $\verb:\shortitemwidth: + \verb:\labelwidth: -% + 2\verb:\labelsep:$ (one \verb:\labelsep: between the label and the item; -% another \verb:\labelsep: between this item and the next label). -% The default value is rather arbitrary. -% \begin{macrocode} -\newlength\shortitemwidth -\setlength\shortitemwidth{65pt} -% \end{macrocode} -% \end{macro} -% -% \begin{environment}{shortitemize} -% The default value of the optional argument to the \textsf{shortitemize} -% environment is a box of width \verb:\shortitemwidth:. -% \begin{macrocode} -\newenvironment{shortitemize}[1][\hbox to \shortitemwidth{\hfil}]{% -% \end{macrocode} -% Check the level of nesting and define the default label as for -% \textsf{runitemize} above. -% \begin{macrocode} - \ifnum \@itemdepth >\thr@@\@toodeep\let\endsh@rtitem\relax\else - \ifx\item\sh@rtitem\sh@rtnesterr\let\endsh@rtitem\relax\else - \advance\@itemdepth\@ne - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% -% \end{macrocode} -% Measure the width of the optional argument. -% Since short-list environments -% cannot be nested anyway, you may store the value locally in -% \verb:\shortitemwidth:. -% \begin{macrocode} - \settowidth\shortitemwidth{#1}% -% \end{macrocode} -% -% Use the \textsf{list} environment to create a displayed paragraph for the -% short-list. -% If the end-user has mismatched environments, \LaTeX\ should not mention a -% \textsf{list} environment from the workings of this code, so use -% \verb:\list: and \verb:\endlist: instead of \verb:\begin{list}: and -% \verb:\end{list}:. -% -% In the \textsf{itemize} environment labels stick out in the margin; to get -% things to line up here, it is easier to move the left margin instead. -% \begin{macrocode} - \list{}{\addtolength\leftmargin\itemindent - \addtolength\leftmargin{-\labelwidth}% - \addtolength\leftmargin{-\labelsep}% -% \end{macrocode} -% You cannot have any indentation inside the \textsf{shortitemize} -% environment. -% \begin{macrocode} - \setlength\itemindent\z@}% -% \end{macrocode} -% The \verb:\item: command gets the \textsf{list} environment started. Then -% it is safe to set up a custom version of \verb:\item: -% \changes{1.1}{98/11/27}{Fixed the ragged right.} -% and a \verb:\raggedright: style right-hand margin. -% The \verb:\endsh@rtitem: command is explained below. -% \begin{macrocode} - \item\relax - \@rightskip\@flushglue \rightskip\@rightskip - \let\endsh@rtitem\noindent - \let\item\sh@rtitem - \def\@itemlabel{\csname\@itemitem\endcsname}% - \fi\fi\ignorespaces}% -% \end{macrocode} -% -% At the end of the \textsf{shortitemize} environment you must process the -% last item and close the \textsf{list} environment. -% \begin{macrocode} - {\endsh@rtitem\endlist} -% \end{macrocode} -% \end{environment} -% -% -% \begin{environment}{shortenumerate} -% The definition of the \textsf{shortenumerate} environment is straight -% forward once you comprehend the \textsf{runenumerate} and -% \textsf{shortitemize} environments. -% \changes{1.1}{98/11/27}{Fixed the ragged right.} -% \begin{macrocode} -\newenvironment{shortenumerate}[1][\hbox to \shortitemwidth{\hfil}]{% - \ifnum \@enumdepth >\thr@@\@toodeep\let\endsh@rtitem\relax\else - \ifx\item\sh@rtitem\sh@rtnesterr\let\endsh@rtitem\relax\else - \advance\@enumdepth\@ne - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \settowidth\shortitemwidth{#1}% - \list{}{\addtolength\leftmargin\itemindent - \addtolength\leftmargin{-\labelwidth}% - \addtolength\leftmargin{-\labelsep}% - \setlength\itemindent\z@}% - \item\relax - \@rightskip\@flushglue \rightskip\@rightskip - \let\endsh@rtitem\noindent - \let\item\sh@rtitem - \usecounter{\@enumctr}% - \def\@itemlabel{\csname label\@enumctr \endcsname}% - \fi\fi\ignorespaces}% - {\endsh@rtitem\endlist} -% \end{macrocode} -% \end{environment} -% -% \begin{macro}{\TX@ftn}\begin{macro}{\TX@ftntext}\begin{macro}{\TX@xftntext} -% Since each item is typeset inside a box, \TeX\ gobbles up all footnotes. -% David Carlisle has solved that problem in his \textsf{tabularx} package -% \cite[code lines 122--127]{tabularx}. To -% require all of that package every time seems a bit much, so just copy those -% lines of code if needed. -% These special versions of \verb:\@footnotetext: and \verb:\@xfootnotetext: -% store appropriate \verb:\footnotetext: commands in the token list -% \verb:\TX@ftn: for later processing. -% \begin{macrocode} -\ifx\TX@ftn\undefined - \newtoks\TX@ftn - \long\def\TX@ftntext#1{% - \edef\@tempa{\the\TX@ftn\noexpand\footnotetext - [\the\csname c@\@mpfn\endcsname]}% - \global\TX@ftn\expandafter{\@tempa{#1}}}% - \long\def\TX@xftntext[#1]#2{% - \global\TX@ftn\expandafter{\the\TX@ftn\footnotetext[#1]{#2}}} -\fi -% \end{macrocode} -% \end{macro}\end{macro}\end{macro} -% -% \begin{macro}{\sh@rtitem} -% You need to capture each item in a box. Thus each \verb:\item: must close -% and process the previous box before it begins capturing the next item. The -% custom version of \verb:\item: therefore first calls \verb:\endsh@rtitem: to -% finish off the last item, then checks for an optional argument, stores the -% answer in \verb:\@noitemarg:, and calls \verb:\sh@rt@item: or -% \verb:\sh@rt@item[\@itemlabel]: as appropriate. Here \verb:\@itemlabel: is -% the default label. -% \begin{macrocode} -\def\sh@rtitem{% - \endsh@rtitem - \@inmatherr\item - \@ifnextchar [\sh@rt@item{\@noitemargtrue \sh@rt@item[\@itemlabel]}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\sh@rt@item} -% \begin{macro}{\endsh@rtitem} -% The \verb:\sh@rt@item: command first (re-)defines \verb:\endsh@rtitem:. An -% \textsf{lrbox} environment captures the label and the text of the item in -% the box \verb:\@tempboxa:, so close that environment---only use -% \verb:\begingroup\lrbox: and \verb:\endlrbox\endgroup: instead of -% \verb:\begin{lrbox}: and \verb:\end{lrbox}: as for \verb:\list: above (the -% extra group is necessary due to the convoluted workings of \textsf{lrbox} -% \cite[code lines 69--80]{ltboxes}). -% \begin{macrocode} -\def\sh@rt@item[#1]{% - \def\endsh@rtitem{\endlrbox\endgroup% -% \end{macrocode} -% Measure the width of the box---that is, the width of the label, the space -% between the label and the item, and the item itself. Let $a$ be that width -% plus one \verb:\labelsep: (for the separation between this item and the next -% label). -% \begin{macrocode} - \setlength\@tempdima{\wd\@tempboxa}% - \addtolength\@tempdima\labelsep -% \end{macrocode} -% Then let $b$ be the ``fixed length;'' that is, $\verb:\labelwidth: + -% 2\verb:\labelsep: + \verb:\shortitemwidth:$. -% \begin{macrocode} - \setlength\@tempdimb\shortitemwidth - \addtolength\@tempdimb{2\labelsep}% - \addtolength\@tempdimb{\labelwidth}% -% \end{macrocode} -% Then calculate how many multiples of $b$ you need to contain $a$; that is, -% calculate $\lceil \frac ab \rceil b$. However, \LaTeX\ does not provide a -% ceiling function, so use \TeX's integer division command, which (for -% positive integers) calculates $\lfloor \frac ab \rfloor$, and add one. The -% result is fine except when $b$ divides $a$ perfectly---which could happen if -% the item is a \verb:\parbox{\shortitemwidth}:, so cheat: decrease $a$ by A -% Very Small Length first. -% \begin{macrocode} - \addtolength\@tempdima{-1sp}% subtract a Very Small Length - \divide\@tempdima by \@tempdimb% - \addtolength\@tempdima{1sp}% add one - \multiply\@tempdimb by \@tempdima% -% \end{macrocode} -% Now $b$ is the desired width of the box. Instead of actually making a box of -% that width, typeset the box as is followed by a suitable amount of space -% (which will then nicely disappear if it happens to land on the right-hand -% margin). -% \begin{macrocode} - \addtolength\@tempdimb{-\wd\@tempboxa}% - \usebox\@tempboxa -% \end{macrocode} -% Now $b$ is the amount of space which you must remember to set once the -% footnotes have been processed.. -% -% The following line of code (from \cite[code line 50]{tabularx}) inserts the -% footnotes (or, rather, \verb:\footnotetext:-s) that were collected inside -% the box. -% The \verb:\expandafter: trickery causes \TeX\ to first clear the token list -% \verb:\TX@ftn:, then execute the \verb:\footnotetext: commands that it -% contained. This convoluted order ensures that the \verb:\footnotetext:-s go -% back into \verb:\TX@ftn: if the short-list is nested inside a -% \textsf{tabularx} environment (so that \textsf{tabularx} can typeset them in -% due time). -% \begin{macrocode} - \global\TX@ftn\expandafter{\expandafter}\the\TX@ftn - \hspace\@tempdimb}% -% \end{macrocode} -% \end{macro} -% -% That was the end---now back to the beginning. First ref-step the counter if -% appropriate. -% \begin{macrocode} - \if@noitemarg - \@noitemargfalse - \if@nmbrlist\refstepcounter{\@listctr}\fi - \fi -% \end{macrocode} -% Issue a warning if the label is too wide---it may overlap the previous item. -% \begin{macrocode} - \settowidth\@tempdima{#1}% - \ifdim\@tempdima>\labelwidth\PackageWarning{shortlst}% - {label too wide - (set \string\labelwidth\space to at least \the\@tempdima)}% - \fi -% \end{macrocode} -% Then begin collecting an lrbox. Once inside the box, use the custom -% footnotes and set the label and some space before the item itself. -% \begin{macrocode} - \begingroup\lrbox{\@tempboxa}% - \let\@footnotetext\TX@ftntext\let\@xfootnotenext\TX@xftntext - \makebox[\labelwidth][r]{#1}% - \hspace{\labelsep}\ignorespaces} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\sh@rtnesterr} -% That's it! You just need a single custom error message. -% \begin{macrocode} -\newcommand{\sh@rtnesterr}{\PackageError{shortlst} - {nested short-lists} - {don't nest short-list environments within each other}} -% -% \end{macrocode} -% \end{macro} -% \Finale diff --git a/Master/texmf-dist/source/latex/shortlst/shortlst.ins b/Master/texmf-dist/source/latex/shortlst/shortlst.ins deleted file mode 100644 index 5d671bf6182..00000000000 --- a/Master/texmf-dist/source/latex/shortlst/shortlst.ins +++ /dev/null @@ -1,18 +0,0 @@ -%% LaTeX2e file `shortlst.ins' -%% generated by the `filecontents' environment -%% from source `shortlst' on 2003/04/30. -%% -\input docstrip.tex -\preamble - The shortlst Package - Copyright 1998 by Mogens Lemvig Hansen - mlhansen@uniserve.com -\endpreamble -% \end{macrocode} -% I think that \texttt{shortlst.sty} should go into the directory -% \texttt{tex/latex/misc}; however, \textsc{DocStrip} will not heed my advise -% unless your configuration file, \texttt{docstrip.cfg}, allows it to. -% \begin{macrocode} -\usedir{tex/latex/misc} -\generate{\file{shortlst.sty}{\from{shortlst.dtx}{package}}} -\endbatchfile diff --git a/Master/texmf-dist/tex/latex/shortlst/shortlst.sty b/Master/texmf-dist/tex/latex/shortlst/shortlst.sty deleted file mode 100644 index ae83d7eaa4b..00000000000 --- a/Master/texmf-dist/tex/latex/shortlst/shortlst.sty +++ /dev/null @@ -1,133 +0,0 @@ -%% -%% This is file `shortlst.sty', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% shortlst.dtx (with options: `package') -%% The shortlst Package -%% Copyright 1998 by Mogens Lemvig Hansen -%% mlhansen@uniserve.com - -%% You may use this software. -%% You may copy this software and the documentation for your own use. -%% You may distribute the file \texttt{shortlst.dtx} to others provided -%% you do not make a profit doing so. -%% You may modify my code and the documentation---including incorporating -%% it into your own work---provided you do not make a profit on my work -%% or allow others to. -\NeedsTeXFormat{LaTeX2e}[1997/12/01] -\ProvidesPackage{shortlst} - [1998/11/27 version 1.1] -\newlength\runitemsep -\setlength\runitemsep{1em plus .5em minus .5em} -\newenvironment{runitemize}{% - \ifnum \@itemdepth >\thr@@\@toodeep\else - \advance\@itemdepth\@ne - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% - \def\@itemlabel{\csname\@itemitem\endcsname}% - \let\@item\run@item - \let\par\relax - \ignorespaces\fi} - {\unskip\hspace\runitemsep\ignorespacesafterend} -\newenvironment{runenumerate}{% - \ifnum \@enumdepth >\thr@@\@toodeep\else - \advance\@enumdepth\@ne - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \usecounter{\@enumctr}% - \def\@itemlabel{\csname label\@enumctr \endcsname}% - \let\@item\run@item - \let\par\@empty - \ignorespaces\fi} - {\unskip\hspace\runitemsep\ignorespacesafterend} -\def\run@item[#1]{% - \ifhmode\unskip\hspace\runitemsep\else\leavevmode\fi - \if@noitemarg - \@noitemargfalse - \if@nmbrlist\refstepcounter{\@listctr}\fi - \fi - \mbox{#1}\kern\labelsep\ignorespaces} -\newlength\shortitemwidth -\setlength\shortitemwidth{65pt} -\newenvironment{shortitemize}[1][\hbox to \shortitemwidth{\hfil}]{% - \ifnum \@itemdepth >\thr@@\@toodeep\let\endsh@rtitem\relax\else - \ifx\item\sh@rtitem\sh@rtnesterr\let\endsh@rtitem\relax\else - \advance\@itemdepth\@ne - \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}% - \settowidth\shortitemwidth{#1}% - \list{}{\addtolength\leftmargin\itemindent - \addtolength\leftmargin{-\labelwidth}% - \addtolength\leftmargin{-\labelsep}% - \setlength\itemindent\z@}% - \item\relax - \@rightskip\@flushglue \rightskip\@rightskip - \let\endsh@rtitem\noindent - \let\item\sh@rtitem - \def\@itemlabel{\csname\@itemitem\endcsname}% - \fi\fi\ignorespaces}% - {\endsh@rtitem\endlist} -\newenvironment{shortenumerate}[1][\hbox to \shortitemwidth{\hfil}]{% - \ifnum \@enumdepth >\thr@@\@toodeep\let\endsh@rtitem\relax\else - \ifx\item\sh@rtitem\sh@rtnesterr\let\endsh@rtitem\relax\else - \advance\@enumdepth\@ne - \edef\@enumctr{enum\romannumeral\the\@enumdepth}% - \settowidth\shortitemwidth{#1}% - \list{}{\addtolength\leftmargin\itemindent - \addtolength\leftmargin{-\labelwidth}% - \addtolength\leftmargin{-\labelsep}% - \setlength\itemindent\z@}% - \item\relax - \@rightskip\@flushglue \rightskip\@rightskip - \let\endsh@rtitem\noindent - \let\item\sh@rtitem - \usecounter{\@enumctr}% - \def\@itemlabel{\csname label\@enumctr \endcsname}% - \fi\fi\ignorespaces}% - {\endsh@rtitem\endlist} -\ifx\TX@ftn\undefined - \newtoks\TX@ftn - \long\def\TX@ftntext#1{% - \edef\@tempa{\the\TX@ftn\noexpand\footnotetext - [\the\csname c@\@mpfn\endcsname]}% - \global\TX@ftn\expandafter{\@tempa{#1}}}% - \long\def\TX@xftntext[#1]#2{% - \global\TX@ftn\expandafter{\the\TX@ftn\footnotetext[#1]{#2}}} -\fi -\def\sh@rtitem{% - \endsh@rtitem - \@inmatherr\item - \@ifnextchar [\sh@rt@item{\@noitemargtrue \sh@rt@item[\@itemlabel]}} -\def\sh@rt@item[#1]{% - \def\endsh@rtitem{\endlrbox\endgroup% - \setlength\@tempdima{\wd\@tempboxa}% - \addtolength\@tempdima\labelsep - \setlength\@tempdimb\shortitemwidth - \addtolength\@tempdimb{2\labelsep}% - \addtolength\@tempdimb{\labelwidth}% - \addtolength\@tempdima{-1sp}% subtract a Very Small Length - \divide\@tempdima by \@tempdimb% - \addtolength\@tempdima{1sp}% add one - \multiply\@tempdimb by \@tempdima% - \addtolength\@tempdimb{-\wd\@tempboxa}% - \usebox\@tempboxa - \global\TX@ftn\expandafter{\expandafter}\the\TX@ftn - \hspace\@tempdimb}% - \if@noitemarg - \@noitemargfalse - \if@nmbrlist\refstepcounter{\@listctr}\fi - \fi - \settowidth\@tempdima{#1}% - \ifdim\@tempdima>\labelwidth\PackageWarning{shortlst}% - {label too wide - (set \string\labelwidth\space to at least \the\@tempdima)}% - \fi - \begingroup\lrbox{\@tempboxa}% - \let\@footnotetext\TX@ftntext\let\@xfootnotenext\TX@xftntext - \makebox[\labelwidth][r]{#1}% - \hspace{\labelsep}\ignorespaces} -\newcommand{\sh@rtnesterr}{\PackageError{shortlst} - {nested short-lists} - {don't nest short-list environments within each other}} -\endinput -%% -%% End of file `shortlst.sty'. diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc index ae852a9c655..07aea466ea5 100644 --- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc +++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc @@ -444,7 +444,6 @@ depend shadbox depend shadethm depend shapepar depend shipunov -depend shortlst depend shorttoc depend show2e depend showdim diff --git a/Master/tlpkg/tlpsrc/shortlst.tlpsrc b/Master/tlpkg/tlpsrc/shortlst.tlpsrc deleted file mode 100644 index a6ff50f1f00..00000000000 --- a/Master/tlpkg/tlpsrc/shortlst.tlpsrc +++ /dev/null @@ -1,2 +0,0 @@ -name shortlst -category Package -- cgit v1.2.3