From 586cb4bcf9fac805b5b4cf49d509a1c49933dd84 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Thu, 14 Jan 2016 02:16:47 +0000 Subject: /home/texlive/karl/Master/tlpkg/bin/tl-update-auto git-svn-id: svn://tug.org/texlive/trunk@39380 c570f23f-e606-0410-a88d-b1316a301751 --- Build/source/build-aux/depcomp | 4 +- Build/source/build-aux/install-sh | 4 +- Build/source/build-aux/texinfo.tex | 17 +- .../freetype2/freetype-src/builds/unix/install-sh | 4 +- Build/source/libs/icu/icu-56.1/source/install-sh | 660 ++++++++++++++------- Build/source/utils/asymptote/doc/FAQ/install-sh | 387 ++++++------ Build/source/utils/asymptote/doc/install-sh | 387 ++++++------ Build/source/utils/asymptote/install-sh | 387 ++++++------ Master/doc.html | 45 +- 9 files changed, 1059 insertions(+), 836 deletions(-) diff --git a/Build/source/build-aux/depcomp b/Build/source/build-aux/depcomp index fda2463f383..28ce42a9b03 100755 --- a/Build/source/build-aux/depcomp +++ b/Build/source/build-aux/depcomp @@ -1,7 +1,7 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2013-05-30.07; # UTC +scriptversion=2016-01-11.22; # UTC # Copyright (C) 1999-2015 Free Software Foundation, Inc. @@ -751,6 +751,6 @@ exit 0 # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Build/source/build-aux/install-sh b/Build/source/build-aux/install-sh index 0b0fdcbba69..0360b79e7d0 100755 --- a/Build/source/build-aux/install-sh +++ b/Build/source/build-aux/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2013-12-25.23; # UTC +scriptversion=2016-01-11.22; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -496,6 +496,6 @@ done # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Build/source/build-aux/texinfo.tex b/Build/source/build-aux/texinfo.tex index 0dfc10f2ea8..936c32dc5f4 100644 --- a/Build/source/build-aux/texinfo.tex +++ b/Build/source/build-aux/texinfo.tex @@ -3,7 +3,7 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2016-01-07.22} +\def\texinfoversion{2016-01-11.19} % % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, @@ -9434,13 +9434,16 @@ directory should work if nowhere else does.} \else \XeTeXdefaultencoding "bytes" % For subsequent files to be read \XeTeXinputencoding "bytes" % Effective in texinfo.tex only +% Unfortunately, there seems to be no corresponding XeTeX command for +% output encoding. This is a problem for auxiliary index and TOC files. +% The only solution would be perhaps to write out @U{...} sequences in +% place of UTF-8 characters. \fi \ifx\luatexversion\thisisundefined \else \directlua{ local utf8_char, byte, gsub = unicode.utf8.char, string.byte, string.gsub - local function convert_char (char) return utf8_char(byte(char)) end @@ -9450,6 +9453,16 @@ local function convert_line (line) end callback.register("process_input_buffer", convert_line) + +local function convert_line_out (line) + local line_out = "" + for c in string.utfvalues(line) do + line_out = line_out .. string.char(c) + end + return line_out +end + +callback.register("process_output_buffer", convert_line_out) } \fi diff --git a/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh b/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh index 0b0fdcbba69..0360b79e7d0 100755 --- a/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh +++ b/Build/source/libs/freetype2/freetype-src/builds/unix/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2013-12-25.23; # UTC +scriptversion=2016-01-11.22; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -496,6 +496,6 @@ done # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Build/source/libs/icu/icu-56.1/source/install-sh b/Build/source/libs/icu/icu-56.1/source/install-sh index e9de23842dc..0360b79e7d0 100755 --- a/Build/source/libs/icu/icu-56.1/source/install-sh +++ b/Build/source/libs/icu/icu-56.1/source/install-sh @@ -1,251 +1,501 @@ #!/bin/sh -# # install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). + +scriptversion=2016-01-11.22; # UTC + +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. +# +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. # -# Copyright 1991 by the Massachusetts Institute of Technology +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. # -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. +# +# FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. +# from scratch. + +tab=' ' +nl=' +' +IFS=" $tab$nl" +# Set DOITPROG to "echo" to test this script. -# set DOITPROG to echo to test this script +doit=${DOITPROG-} +doit_exec=${doit:-exec} -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" +# Put in absolute file names if you don't have them in your path; +# or use environment vars. +chgrpprog=${CHGRPPROG-chgrp} +chmodprog=${CHMODPROG-chmod} +chownprog=${CHOWNPROG-chown} +cmpprog=${CMPPROG-cmp} +cpprog=${CPPROG-cp} +mkdirprog=${MKDIRPROG-mkdir} +mvprog=${MVPROG-mv} +rmprog=${RMPROG-rm} +stripprog=${STRIPPROG-strip} -# put in absolute paths if you don't have them in your path; or use env. vars. +posix_mkdir= -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" +# Desired mode of installed file. +mode=0755 -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" +chgrpcmd= +chmodcmd=$chmodprog +chowncmd= +mvcmd=$mvprog rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done +stripcmd= -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi +src= +dst= +dir_arg= +dst_arg= -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi +copy_on_change=false +is_target_a_directory=possibly -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +usage="\ +Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE + or: $0 [OPTION]... SRCFILES... DIRECTORY + or: $0 [OPTION]... -t DIRECTORY SRCFILES... + or: $0 [OPTION]... -d DIRECTORIES... -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script +In the 1st form, copy SRCFILE to DSTFILE. +In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. +In the 4th, create DIRECTORIES. -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" +Options: + --help display this help and exit. + --version display version info and exit. -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" + -c (ignored) + -C install only if different (preserve the last data modification time) + -d create directories instead of installing files. + -g GROUP $chgrpprog installed files to GROUP. + -m MODE $chmodprog installed files to MODE. + -o USER $chownprog installed files to USER. + -s $stripprog installed files. + -t DIRECTORY install into DIRECTORY. + -T report an error if DSTFILE is a directory. -pathcomp='' +Environment variables override the default commands: + CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG + RMPROG STRIPPROG +" -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift +while test $# -ne 0; do + case $1 in + -c) ;; - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi + -C) copy_on_change=true;; - pathcomp="${pathcomp}/" -done -fi + -d) dir_arg=true;; -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && + -g) chgrpcmd="$chgrpprog $2" + shift;; - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else + --help) echo "$usage"; exit $?;; -# If we're going to rename the final executable, determine the name now. + -m) mode=$2 + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi + -o) chowncmd="$chownprog $2" + shift;; -# don't allow the sed command to completely eliminate the filename + -s) stripcmd=$stripprog;; - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; -# Make a temp file name in the proper directory. + -T) is_target_a_directory=never;; - dsttmp=$dstdir/#inst.$$# + --version) echo "$0 $scriptversion"; exit $?;; -# Move or copy the file name to the temp name + --) shift + break;; - $doit $instcmd $src $dsttmp && + -*) echo "$0: invalid option: $1" >&2 + exit 1;; - trap "rm -f ${dsttmp}" 0 && + *) break;; + esac + shift +done -# and set any options; do chmod last to preserve setuid bits +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && +if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then + # When -d is used, all remaining arguments are directories to create. + # When -t is used, the destination is already specified. + # Otherwise, the last argument is the destination. Remove it from $@. + for arg + do + if test -n "$dst_arg"; then + # $@ is not empty: it contains at least $arg. + set fnord "$@" "$dst_arg" + shift # fnord + fi + shift # arg + dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + done +fi -# Now rename the file to the real destination. +if test $# -eq 0; then + if test -z "$dir_arg"; then + echo "$0: no input file specified." >&2 + exit 1 + fi + # It's OK to call 'install-sh -d' without argument. + # This can happen when creating conditional directories. + exit 0 +fi + +if test -z "$dir_arg"; then + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 + + # Set umask so as not to create temps with too-generous modes. + # However, 'strip' requires both read and write access to temps. + case $mode in + # Optimize common cases. + *644) cp_umask=133;; + *755) cp_umask=22;; + + *[0-7]) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw='% 200' + fi + cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; + *) + if test -z "$stripcmd"; then + u_plus_rw= + else + u_plus_rw=,u+rw + fi + cp_umask=$mode$u_plus_rw;; + esac +fi -fi && +for src +do + # Protect names problematic for 'test' and other utilities. + case $src in + -* | [=\(\)!]) src=./$src;; + esac + + if test -n "$dir_arg"; then + dst=$src + dstdir=$dst + test -d "$dstdir" + dstdir_status=$? + else + + # Waiting for this to be detected by the "$cpprog $src $dsttmp" command + # might cause directories to be created, which would be especially bad + # if $src (and thus $dsttmp) contains '*'. + if test ! -f "$src" && test ! -d "$src"; then + echo "$0: $src does not exist." >&2 + exit 1 + fi + + if test -z "$dst_arg"; then + echo "$0: no destination specified." >&2 + exit 1 + fi + dst=$dst_arg + + # If destination is a directory, append the input filename; won't work + # if double slashes aren't ignored. + if test -d "$dst"; then + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 + fi + dstdir=$dst + dst=$dstdir/`basename "$src"` + dstdir_status=0 + else + dstdir=`dirname "$dst"` + test -d "$dstdir" + dstdir_status=$? + fi + fi + + obsolete_mkdir_used=false + + if test $dstdir_status != 0; then + case $posix_mkdir in + '') + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; + esac + if + $posix_mkdir && ( + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + ) + then : + else + + # The umask is ridiculous, or mkdir does not conform to POSIX, + # or it failed possibly due to a race condition. Create the + # directory the slow way, step by step, checking for races as we go. + + case $dstdir in + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; + esac + + oIFS=$IFS + IFS=/ + set -f + set fnord $dstdir + shift + set +f + IFS=$oIFS + + prefixes= + + for d + do + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ + done + + if test -n "$prefixes"; then + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true + fi + fi + fi + + if test -n "$dir_arg"; then + { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && + { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || + test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 + else + + # Make a couple of temp file names in the proper directory. + dsttmp=$dstdir/_inst.$$_ + rmtmp=$dstdir/_rm.$$_ + + # Trap to clean up those temp files at exit. + trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 + + # Copy the file name to the temp name. + (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && + + # and set any options; do chmod last to preserve setuid bits. + # + # If any of these fail, we abort the whole thing. If we want to + # ignore errors from any of these, just make sure not to ignore + # errors from the above "$doit $cpprog $src $dsttmp" command. + # + { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && + { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && + { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && + { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && + + # If -C, don't bother to copy if it wouldn't change the file. + if $copy_on_change && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && + set X $old && old=:$2:$4:$5:$6 && + set X $new && new=:$2:$4:$5:$6 && + set +f && + test "$old" = "$new" && + $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 + then + rm -f "$dsttmp" + else + # Rename the file to the real destination. + $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || + + # The rename failed, perhaps because mv can't rename something else + # to itself, or perhaps because mv is so ancient that it does not + # support -f. + { + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" + } + fi || exit 1 + + trap '' 0 + fi +done -exit 0 +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC0" +# time-stamp-end: "; # UTC" +# End: diff --git a/Build/source/utils/asymptote/doc/FAQ/install-sh b/Build/source/utils/asymptote/doc/FAQ/install-sh index 6781b987bdb..0360b79e7d0 100755 --- a/Build/source/utils/asymptote/doc/FAQ/install-sh +++ b/Build/source/utils/asymptote/doc/FAQ/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2009-04-28.21; # UTC +scriptversion=2016-01-11.22; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,25 +35,21 @@ scriptversion=2009-04-28.21; # UTC # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dir_arg= dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,42 +122,57 @@ while test $# -ne 0; do -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -186,6 +186,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then fi shift # arg dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac done fi @@ -194,13 +198,26 @@ if test $# -eq 0; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. @@ -211,16 +228,16 @@ if test -z "$dir_arg"; then *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -228,9 +245,9 @@ fi for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then @@ -252,51 +269,20 @@ do echo "$0: no destination specified." >&2 exit 1 fi - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -307,74 +293,74 @@ do if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -384,53 +370,51 @@ do # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -465,15 +449,12 @@ do # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -486,24 +467,24 @@ do # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 @@ -515,6 +496,6 @@ done # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Build/source/utils/asymptote/doc/install-sh b/Build/source/utils/asymptote/doc/install-sh index 6781b987bdb..0360b79e7d0 100755 --- a/Build/source/utils/asymptote/doc/install-sh +++ b/Build/source/utils/asymptote/doc/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2009-04-28.21; # UTC +scriptversion=2016-01-11.22; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,25 +35,21 @@ scriptversion=2009-04-28.21; # UTC # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dir_arg= dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,42 +122,57 @@ while test $# -ne 0; do -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -186,6 +186,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then fi shift # arg dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac done fi @@ -194,13 +198,26 @@ if test $# -eq 0; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. @@ -211,16 +228,16 @@ if test -z "$dir_arg"; then *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -228,9 +245,9 @@ fi for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then @@ -252,51 +269,20 @@ do echo "$0: no destination specified." >&2 exit 1 fi - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -307,74 +293,74 @@ do if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -384,53 +370,51 @@ do # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -465,15 +449,12 @@ do # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -486,24 +467,24 @@ do # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 @@ -515,6 +496,6 @@ done # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Build/source/utils/asymptote/install-sh b/Build/source/utils/asymptote/install-sh index 6781b987bdb..0360b79e7d0 100755 --- a/Build/source/utils/asymptote/install-sh +++ b/Build/source/utils/asymptote/install-sh @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2009-04-28.21; # UTC +scriptversion=2016-01-11.22; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -35,25 +35,21 @@ scriptversion=2009-04-28.21; # UTC # FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it +# 'make' implicit rules from creating a file called install from it # when there is no Makefile. # # This script is compatible with the BSD install script, but was written # from scratch. +tab=' ' nl=' ' -IFS=" "" $nl" +IFS=" $tab$nl" -# set DOITPROG to echo to test this script +# Set DOITPROG to "echo" to test this script. -# Don't use :- since 4.3BSD and earlier shells don't like it. doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi +doit_exec=${doit:-exec} # Put in absolute file names if you don't have them in your path; # or use environment vars. @@ -68,17 +64,6 @@ mvprog=${MVPROG-mv} rmprog=${RMPROG-rm} stripprog=${STRIPPROG-strip} -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - posix_mkdir= # Desired mode of installed file. @@ -97,7 +82,7 @@ dir_arg= dst_arg= copy_on_change=false -no_target_directory= +is_target_a_directory=possibly usage="\ Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE @@ -137,42 +122,57 @@ while test $# -ne 0; do -d) dir_arg=true;; -g) chgrpcmd="$chgrpprog $2" - shift;; + shift;; --help) echo "$usage"; exit $?;; -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; + case $mode in + *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*) + echo "$0: invalid mode: $mode" >&2 + exit 1;; + esac + shift;; -o) chowncmd="$chownprog $2" - shift;; + shift;; -s) stripcmd=$stripprog;; - -t) dst_arg=$2 - shift;; + -t) + is_target_a_directory=always + dst_arg=$2 + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac + shift;; - -T) no_target_directory=true;; + -T) is_target_a_directory=never;; --version) echo "$0 $scriptversion"; exit $?;; - --) shift - break;; + --) shift + break;; - -*) echo "$0: invalid option: $1" >&2 - exit 1;; + -*) echo "$0: invalid option: $1" >&2 + exit 1;; *) break;; esac shift done +# We allow the use of options -d and -T together, by making -d +# take the precedence; this is for compatibility with GNU install. + +if test -n "$dir_arg"; then + if test -n "$dst_arg"; then + echo "$0: target directory not allowed when installing a directory." >&2 + exit 1 + fi +fi + if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then # When -d is used, all remaining arguments are directories to create. # When -t is used, the destination is already specified. @@ -186,6 +186,10 @@ if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then fi shift # arg dst_arg=$arg + # Protect names problematic for 'test' and other utilities. + case $dst_arg in + -* | [=\(\)!]) dst_arg=./$dst_arg;; + esac done fi @@ -194,13 +198,26 @@ if test $# -eq 0; then echo "$0: no input file specified." >&2 exit 1 fi - # It's OK to call `install-sh -d' without argument. + # It's OK to call 'install-sh -d' without argument. # This can happen when creating conditional directories. exit 0 fi if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 + if test $# -gt 1 || test "$is_target_a_directory" = always; then + if test ! -d "$dst_arg"; then + echo "$0: $dst_arg: Is not a directory." >&2 + exit 1 + fi + fi +fi + +if test -z "$dir_arg"; then + do_exit='(exit $ret); exit $ret' + trap "ret=129; $do_exit" 1 + trap "ret=130; $do_exit" 2 + trap "ret=141; $do_exit" 13 + trap "ret=143; $do_exit" 15 # Set umask so as not to create temps with too-generous modes. # However, 'strip' requires both read and write access to temps. @@ -211,16 +228,16 @@ if test -z "$dir_arg"; then *[0-7]) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw='% 200' + u_plus_rw='% 200' fi cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; *) if test -z "$stripcmd"; then - u_plus_rw= + u_plus_rw= else - u_plus_rw=,u+rw + u_plus_rw=,u+rw fi cp_umask=$mode$u_plus_rw;; esac @@ -228,9 +245,9 @@ fi for src do - # Protect names starting with `-'. + # Protect names problematic for 'test' and other utilities. case $src in - -*) src=./$src;; + -* | [=\(\)!]) src=./$src;; esac if test -n "$dir_arg"; then @@ -252,51 +269,20 @@ do echo "$0: no destination specified." >&2 exit 1 fi - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac # If destination is a directory, append the input filename; won't work # if double slashes aren't ignored. if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 + if test "$is_target_a_directory" = never; then + echo "$0: $dst_arg: Is a directory" >&2 + exit 1 fi dstdir=$dst dst=$dstdir/`basename "$src"` dstdir_status=0 else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - + dstdir=`dirname "$dst"` test -d "$dstdir" dstdir_status=$? fi @@ -307,74 +293,74 @@ do if test $dstdir_status != 0; then case $posix_mkdir in '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; + # Create intermediate dirs using mode 755 as modified by the umask. + # This is like FreeBSD 'install' as of 1997-10-28. + umask=`umask` + case $stripcmd.$umask in + # Optimize common cases. + *[2367][2367]) mkdir_umask=$umask;; + .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; + + *[0-7]) + mkdir_umask=`expr $umask + 22 \ + - $umask % 100 % 40 + $umask % 20 \ + - $umask % 10 % 4 + $umask % 2 + `;; + *) mkdir_umask=$umask,go-w;; + esac + + # With -d, create the new directory with the user-specified mode. + # Otherwise, rely on $mkdir_umask. + if test -n "$dir_arg"; then + mkdir_mode=-m$mode + else + mkdir_mode= + fi + + posix_mkdir=false + case $umask in + *[123567][0-7][0-7]) + # POSIX mkdir -p sets u+wx bits regardless of umask, which + # is incompatible with FreeBSD 'install' when (umask & 300) != 0. + ;; + *) + tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ + trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + + if (umask $mkdir_umask && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + then + if test -z "$dir_arg" || { + # Check for POSIX incompatibilities with -m. + # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or + # other-writable bit of parent directory when it shouldn't. + # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. + ls_ld_tmpdir=`ls -ld "$tmpdir"` + case $ls_ld_tmpdir in + d????-?r-*) different_mode=700;; + d????-?--*) different_mode=755;; + *) false;; + esac && + $mkdirprog -m$different_mode -p -- "$tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" + } + } + then posix_mkdir=: + fi + rmdir "$tmpdir/d" "$tmpdir" + else + # Remove any dirs left behind by ancient mkdir implementations. + rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + fi + trap '' 0;; + esac;; esac if $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" + umask $mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" ) then : else @@ -384,53 +370,51 @@ do # directory the slow way, step by step, checking for races as we go. case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; + /*) prefix='/';; + [-=\(\)!]*) prefix='./';; + *) prefix='';; esac - eval "$initialize_posix_glob" - oIFS=$IFS IFS=/ - $posix_glob set -f + set -f set fnord $dstdir shift - $posix_glob set +f + set +f IFS=$oIFS prefixes= for d do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ + test X"$d" = X && continue + + prefix=$prefix$d + if test -d "$prefix"; then + prefixes= + else + if $posix_mkdir; then + (umask=$mkdir_umask && + $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break + # Don't fail if two instances are running concurrently. + test -d "$prefix" || exit 1 + else + case $prefix in + *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; + *) qprefix=$prefix;; + esac + prefixes="$prefixes '$qprefix'" + fi + fi + prefix=$prefix/ done if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true + # Don't fail if two instances are running concurrently. + (umask $mkdir_umask && + eval "\$doit_exec \$mkdirprog $prefixes") || + test -d "$dstdir" || exit 1 + obsolete_mkdir_used=true fi fi fi @@ -465,15 +449,12 @@ do # If -C, don't bother to copy if it wouldn't change the file. if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && + old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && + new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && + set -f && set X $old && old=:$2:$4:$5:$6 && set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - + set +f && test "$old" = "$new" && $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 then @@ -486,24 +467,24 @@ do # to itself, or perhaps because mv is so ancient that it does not # support -f. { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" + # Now remove or move aside any old file at destination location. + # We try this two ways since rm can't unlink itself on some + # systems and the destination file might be busy for other + # reasons. In this case, the final cleanup might fail but the new + # file should still install successfully. + { + test ! -f "$dst" || + $doit $rmcmd -f "$dst" 2>/dev/null || + { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && + { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } + } || + { echo "$0: cannot unlink or rename $dst" >&2 + (exit 1); exit 1 + } + } && + + # Now rename the file to the real destination. + $doit $mvcmd "$dsttmp" "$dst" } fi || exit 1 @@ -515,6 +496,6 @@ done # eval: (add-hook 'write-file-hooks 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff --git a/Master/doc.html b/Master/doc.html index c7c38e0b241..6d082223740 100644 --- a/Master/doc.html +++ b/Master/doc.html @@ -8087,6 +8087,11 @@ LaTeX support for the Libre Baskerville family of fonts librebaskerville-samples.pdf. +
  • librebodoni: +Libre Bodoni fonts with LaTeX support +librebodoni-samples.pdf. +
  • +
  • librecaslon: Libre Caslon fonts, with LaTeX support samples.pdf. @@ -8689,7 +8694,7 @@ Set of slide fonts based on CM

    M

    -
      +
      1. m-tx: A preprocessor for pmx @@ -9705,7 +9710,7 @@ Build a format based on the preamble of a LaTeX file

        N

        -
          +
          1. nag: Detecting and warning about obsolete LaTeX commands @@ -10082,7 +10087,7 @@ Print numbers with separators and exponent if necessary

            O

            -
              +
              1. oberdiek: A bundle of packages submitted by Heiko Oberdiek @@ -10376,7 +10381,7 @@ Combine LaTeX commands over included graphics

                P

                -
                  +
                  1. pagecolor: Interrogate page colour @@ -11914,7 +11919,7 @@ Run Python from within a document, typesetting the results

                    Q

                    -
                      +
                      1. qcircuit: Macros to generate quantum ciruits @@ -11979,7 +11984,7 @@ An easy way to typeset any part of The Holy Quran

                        R

                        -
                          +
                          1. raleway: Use Raleway with TeX(-alike) systems @@ -12387,7 +12392,7 @@ Class for Ryerson Unversity Graduate School requirements

                            S

                            -
                              +
                              1. sa-tikz: TikZ library to draw switching architectures @@ -12703,6 +12708,18 @@ LaTeX template for theses at Southeastern University seuthesis.pdf.
                              2. +
                              3. seuthesix: +LaTeX class for theses at Southeast University, Nanjing, China +doctor-hwzs.pdf, +master-hwzs.pdf, +seu-badge-logo.pdf, +rules.pdf, +sample_engineering.pdf, +sample_masters.pdf, +sample_phd.pdf, +seuthesix.pdf. +
                              4. +
                              5. sf298: Standard form 298 sample298.pdf, @@ -13514,7 +13531,7 @@ Format systems of equations

                                T

                                -
                                  +
                                  1. t-angles: Draw tangles, trees, Hopf algebra operations and other pictures @@ -15021,7 +15038,7 @@ Print a typographic grid

                                    U

                                    -
                                      +
                                      1. uaclasses: University of Arizona thesis and dissertation format @@ -15306,7 +15323,7 @@ University of Washington thesis class

                                        V

                                        -
                                          +
                                          1. vancouver: Bibliographic style file for Biomedical Journals @@ -15511,7 +15528,7 @@ Variable-width multiple text columns

                                            W

                                            -
                                              +
                                              1. wadalab: Wadalab (Japanese) font packages @@ -15615,7 +15632,7 @@ LaTeX class for Bavarian school w-seminar papers

                                                X

                                                -
                                                  +
                                                  1. xargs: Define commands with many optional arguments @@ -15964,7 +15981,7 @@ Tree macros using XY-Pic

                                                    Y

                                                    -
                                                      +
                                                      1. yafoot: A bundle of miscellaneous footnote packages @@ -16031,7 +16048,7 @@ Many-featured Young tableaux and Young diagrams

                                                        Z

                                                        -
                                                          +
                                                          1. zed-csp: Typesetting Z and CSP format specifications -- cgit v1.2.3