From 525515c8d9df4f6ece9b285a88e58f01bee94de8 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Sat, 13 Jun 2020 20:58:46 +0000 Subject: nicematrix (13jun20) git-svn-id: svn://tug.org/texlive/trunk@55539 c570f23f-e606-0410-a88d-b1316a301751 --- .../doc/latex/nicematrix/nicematrix-french.pdf | Bin 355481 -> 356758 bytes .../doc/latex/nicematrix/nicematrix-french.tex | 37 ++++ .../texmf-dist/doc/latex/nicematrix/nicematrix.pdf | Bin 873835 -> 882583 bytes .../source/latex/nicematrix/nicematrix.dtx | 219 ++++++++++++++++++--- .../texmf-dist/tex/latex/nicematrix/nicematrix.sty | 67 +++++-- 5 files changed, 279 insertions(+), 44 deletions(-) diff --git a/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.pdf b/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.pdf index c5d481ad72f..24432563ff4 100644 Binary files a/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.pdf and b/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.pdf differ diff --git a/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.tex b/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.tex index d79a0f3727f..a8c0fdd4351 100644 --- a/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.tex +++ b/Master/texmf-dist/doc/latex/nicematrix/nicematrix-french.tex @@ -378,8 +378,45 @@ arum & iris & jacinthe & muguet \end{center} +\interitem +On remarquera que les centrage horizontal du contenu des blocs est correct même si un espacement des colonnes a été +demandé par une instruction comme |!{\qquad}| dans le préambule (ce n'est pas le cas avec |\multicolumn|). Dans +l'exemple suivant, l'en-tête «Premier groupe» est correctement centré. + +\medskip +\begin{center} +\begin{BVerbatim} +\begin{NiceTabular}{C!{\qquad}CCC~emphase#!{\qquad}@CCC} +\toprule +& ~emphase#\Block{1-3}{Premier groupe}@ & & & \Block{1-3}{Deuxième groupe} \\ +Rang & 1A & 1B & 1C & 2A & 2B & 2C \\ +\midrule + 1 & 0.657 & 0.913 & 0.733 & 0.830 & 0.387 & 0.893\\ + 2 & 0.343 & 0.537 & 0.655 & 0.690 & 0.471 & 0.333\\ + 3 & 0.783 & 0.885 & 0.015 & 0.306 & 0.643 & 0.263\\ + 4 & 0.161 & 0.708 & 0.386 & 0.257 & 0.074 & 0.336\\ +\bottomrule +\end{NiceTabular} +\end{BVerbatim} +\end{center} \bigskip +\begin{center} +\begin{NiceTabular}{C!{\qquad}CCC!{\qquad}CCC} +\toprule +& \Block{1-3}{Premier groupe} & & & \Block{1-3}{Deuxième groupe} \\ +Rang & 1A & 1B & 1C & 2A & 2B & 2C \\ +\midrule + 1 & 0.657 & 0.913 & 0.733 & 0.830 & 0.387 & 0.893\\ + 2 & 0.343 & 0.537 & 0.655 & 0.690 & 0.471 & 0.333\\ + 3 & 0.783 & 0.885 & 0.015 & 0.306 & 0.643 & 0.263\\ + 4 & 0.161 & 0.708 & 0.386 & 0.257 & 0.074 & 0.336\\ +\bottomrule +\end{NiceTabular} +\end{center} + + +\interitem On peut aussi utiliser la commande |\Block| dans des matrices mathématiques. \medskip diff --git a/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf b/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf index 184e8e4a595..31fb149271d 100644 Binary files a/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf and b/Master/texmf-dist/doc/latex/nicematrix/nicematrix.pdf differ diff --git a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx index e957be5dc92..a3e658e7572 100644 --- a/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx +++ b/Master/texmf-dist/source/latex/nicematrix/nicematrix.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 2018-2019 by F. Pantigny +% Copyright (C) 2018-2020 by F. Pantigny % ----------------------------------- % % This file may be distributed and/or modified under the @@ -15,8 +15,8 @@ % % \fi % \iffalse -\def\myfileversion{4.2} -\def\myfiledate{2020/06/07} +\def\myfileversion{4.3} +\def\myfiledate{2020/06/12} % % %<*batchfile> @@ -434,9 +434,49 @@ version 2005/12/01 or later. % \end{NiceTabular} % \end{center} % -% +% \interitem +% On should remark that the horizontal centering of the contents of the blocks +% is correct even when an instruction such as |!{\qquad}| has been used in the +% preamble of the array in order to increase the space between two columns (this +% is not the case with |\multicolumn|). In the following example, the header +% ``First group'' is correctly centered. % % \medskip +% \begin{center} +% \begin{BVerbatim} +% \begin{NiceTabular}{C!{\qquad}CCC~emphase#!{\qquad}@CCC} +% \toprule +% & ~emphase#\Block{1-3}{First group}@ & & & \Block{1-3}{Second group} \\ +% Rank & 1A & 1B & 1C & 2A & 2B & 2C \\ +% \midrule +% 1 & 0.657 & 0.913 & 0.733 & 0.830 & 0.387 & 0.893\\ +% 2 & 0.343 & 0.537 & 0.655 & 0.690 & 0.471 & 0.333\\ +% 3 & 0.783 & 0.885 & 0.015 & 0.306 & 0.643 & 0.263\\ +% 4 & 0.161 & 0.708 & 0.386 & 0.257 & 0.074 & 0.336\\ +% \bottomrule +% \end{NiceTabular} +% \end{BVerbatim} +% \end{center} +% +% \bigskip +% \begin{center} +% \begin{NiceTabular}{C!{\qquad}CCC!{\qquad}CCC} +% \toprule +% & \Block{1-3}{First group} & & & \Block{1-3}{Second group} \\ +% Rank & 1A & 1B & 1C & 2A & 2B & 2C \\ +% \midrule +% 1 & 0.657 & 0.913 & 0.733 & 0.830 & 0.387 & 0.893\\ +% 2 & 0.343 & 0.537 & 0.655 & 0.690 & 0.471 & 0.333\\ +% 3 & 0.783 & 0.885 & 0.015 & 0.306 & 0.643 & 0.263\\ +% 4 & 0.161 & 0.708 & 0.386 & 0.257 & 0.074 & 0.336\\ +% \bottomrule +% \end{NiceTabular} +% \end{center} +% +% +% +% +% \interitem % It's also possible to use the command |\Block| in mathematical matrices. % % \medskip @@ -3659,7 +3699,7 @@ version 2005/12/01 or later. % \end{macrocode} % % \bigskip -% The following commands are only for efficiency. It must \emph{not} be protected +% The following commands are only for efficiency. They must \emph{not} be protected % because it will be used (for instance) in names of \textsc{pgf} nodes. % \begin{macrocode} \cs_new:Npn \@@_succ:n #1 { \the \numexpr #1 + 1 \relax } @@ -4049,9 +4089,8 @@ version 2005/12/01 or later. % \begin{macrocode} \seq_new:N \g_@@_pos_of_blocks_seq % \end{macrocode} -% The sequence |\g_@@_pos_of_blocks_seq| will be used by the test of -% non-overlapping of two blocks and when we will draw the rules required by the -% key |hvlines| (these rules won't be drawn within the blocks). +% The sequence |\g_@@_pos_of_blocks_seq| when we will draw the rules required by +% the key |hvlines| (these rules won't be drawn within the blocks). % % \bigskip % We will also manage a sequence for the positions of the dotted lines. These @@ -7884,9 +7923,9 @@ version 2005/12/01 or later. % \begin{macrocode} \cs_new_protected:Npn \@@_draw_non_standard_dotted_line: { - \begin { scope } - \exp_args:No \@@_draw_non_standard_dotted_line:n - { \l_@@_xdots_line_style_tl , \l_@@_xdots_color_tl } + \begin { scope } + \exp_args:No \@@_draw_non_standard_dotted_line:n + { \l_@@_xdots_line_style_tl , \l_@@_xdots_color_tl } } % \end{macrocode} % We have used the fact that, in \textsc{pgf}, un color name can be put directly @@ -9211,7 +9250,7 @@ version 2005/12/01 or later. { \int_compare:nNnT \l_tmpb_tl > { #2 - 1 } { - \int_compare:nNnT \l_tmpb_tl < { #4 + 1 } + \int_compare:nNnT \l_tmpb_tl < { #4 + 1 } { \bool_gset_false:N \g_tmpa_bool } } } @@ -9871,10 +9910,10 @@ version 2005/12/01 or later. % \end{macrocode} % % \bigskip -% \subsection*{Block matrices} +% \subsection*{The blocks} % -% The code in this section if for the construction of \emph{block matrices}. It -% has no direct link with the environment |{NiceMatrixBlock}|. +% The code deals with the command |\Block|. This command has no direct link with +% the environment |{NiceMatrixBlock}|. % % % The following command will be linked to |\Block| in the environments of @@ -9882,8 +9921,10 @@ version 2005/12/01 or later. % because it has an optional argument between |<| and |>| (for TeX instructions % put before the math mode of the label) % +% It's mandatory to use a expandable command (probably because of the first +% optional argument ?). % \begin{macrocode} -\NewDocumentCommand \@@_Block: { O { } m D < > { } m } +\NewExpandableDocumentCommand \@@_Block: { O { } m D < > { } m } { \@@_Block_i #2 \q_stop { #1 } { #3 } { #4 } } % \end{macrocode} % @@ -9909,10 +9950,10 @@ version 2005/12/01 or later. % \begin{macrocode} \tl_set:Nx \l_tmpa_tl { - { \int_use:N \c@iRow } - { \int_use:N \c@jCol } - { \int_eval:n { \c@iRow + #1 - 1 } } - { \int_eval:n { \c@jCol + #2 - 1 } } + { \int_use:N \c@iRow } + { \int_use:N \c@jCol } + { \int_eval:n { \c@iRow + #1 - 1 } } + { \int_eval:n { \c@jCol + #2 - 1 } } } % \end{macrocode} % Now, |\l_tmpa_tl| constains a ``object'' corresponding to the position of the @@ -9944,7 +9985,9 @@ version 2005/12/01 or later. % % \bigskip % The key |tikz| is for Tikz options used when the \textsc{pgf} node of the -% block is created. +% block is created (the ``normal'' block node and not the ``short'' one nor the +% ``medium'' one). \textbf{In fact, as for now, it is \emph{not} documented}. Is +% it really a good idea to provide such a key? % \begin{macrocode} \keys_define:nn { NiceMatrix / Block } { @@ -9965,7 +10008,8 @@ version 2005/12/01 or later. \cs_new_protected:Npn \@@_Block_iii:nnnnnn #1 #2 #3 #4 #5 #6 { % \end{macrocode} -% The group is for the keys. +% The group is for the keys (even if, as for new, there is only one key, called +% |tikz| and not documented). % \begin{macrocode} \group_begin: \keys_set:nn { NiceMatrix / Block } { #5 } @@ -9973,7 +10017,7 @@ version 2005/12/01 or later. % % \begin{macrocode} \bool_lazy_or:nnTF - { \int_compare_p:nNn { #3 } > \c@iRow } + { \int_compare_p:nNn { #3 } > \g_@@_row_total_int } { \int_compare_p:nNn { #4 } > \c@jCol } { \msg_error:nnnn { nicematrix } { Block~too~large } { #1 } { #2 } } { @@ -9984,7 +10028,54 @@ version 2005/12/01 or later. \hbox_set:Nn \l_@@_cell_box { #6 } % \end{macrocode} % -% \medskip +% \bigskip +% Let's consider the following |{NiceTabular}|. Because of the instruction +% |!{\hspace{1cm}}| in the preamble which increases the space between the +% columns (by adding, in fact, that space to the previous column, that is to say +% the second column of the tabular), we will create \emph{two} nodes relative to +% the block: the node |1-1-block| and the node |1-1-block-short|. The latter +% will be used by \pkg{nicematrix} to put the label of the node. The first one +% won't be used explicitely. +% \begin{Verbatim} +% \begin{NiceTabular}{CC!{\hspace{1cm}}C} +% \Block{2-2}{our block} & & one \\ +% & & two \\ +% three & four & five \\ +% six & seven & eight \\ +% \end{NiceTabular} +% \end{Verbatim} +% +% \tikzset{highlight/.style={rectangle, +% fill=red!15, +% blend mode = multiply, +% rounded corners = 0pt, +% inner sep=0pt, +% fit = #1}} +% +% \begin{tabular}{c!{\hspace{1cm}}c} +% We highlight the node |1-1-block| +% & We highlight the node |1-1-block-short| \\[2mm] +% \begin{NiceTabular}{CC!{\hspace{1cm}}C} +% \Block{2-2}{our block} & & one \\ +% & & two \\ +% three & four & five \\ +% six & seven & eight \\ +% \CodeAfter +% \tikz \node [highlight = (1-1-block)] { } ; +% \end{NiceTabular} +% & +% \begin{NiceTabular}{CC!{\hspace{1cm}}C} +% \Block{2-2}{our block} & & one \\ +% & & two \\ +% three & four & five \\ +% six & seven & eight \\ +% \CodeAfter +% \tikz \node [highlight = (1-1-block-short)] { } ; +% \end{NiceTabular} +% \end{tabular} +% +% +% \bigskip % The construction of the node corresponding to the merged cells. % \begin{macrocode} \pgfpicture @@ -10012,7 +10103,55 @@ version 2005/12/01 or later. \l_tmpb_dim \l_tmpa_dim \l_tmpd_dim \l_tmpc_dim \end { pgfscope } % \end{macrocode} +% +% % +% \medskip +% We construct the |short| node. +% \begin{macrocode} + \dim_set_eq:NN \l_tmpb_dim \c_max_dim + \int_step_inline:nnn \l_@@_first_row_int \g_@@_row_total_int + { +% \end{macrocode} +% We recall that, when a cell is empty, no (normal) node is created in that +% cell. That's why we test the existence of the node before using it. +% \begin{macrocode} + \cs_if_exist:cT + { pgf @ sh @ ns @ \@@_env: - ##1 - #2 } + { + \pgfpointanchor { \@@_env: - ##1 - #2 } { west } + \dim_set:Nn \l_tmpb_dim { \dim_min:nn \l_tmpb_dim \pgf@x } + } + } +% \end{macrocode} +% If all the cells of the column were empty, |\l_tmpb_dim| has still the same +% value |\c_max_dim|. In that case, you use for |\l_tmpb_dim| the value of the +% position of the vertical rule. +% \begin{macrocode} + \dim_compare:nNnT \l_tmpb_dim = \c_max_dim + { + \@@_qpoint:n { col - #2 } + \dim_set_eq:NN \l_tmpb_dim \pgf@x + } + \dim_set:Nn \l_tmpd_dim { - \c_max_dim } + \int_step_inline:nnn \l_@@_first_row_int \g_@@_row_total_int + { + \cs_if_exist:cT + { pgf @ sh @ ns @ \@@_env: - ##1 - #4 } + { + \pgfpointanchor { \@@_env: - ##1 - #4 } { east } + \dim_set:Nn \l_tmpd_dim { \dim_max:nn \l_tmpd_dim \pgf@x } + } + } + \dim_compare:nNnT \l_tmpd_dim = { - \c_max_dim } + { + \@@_qpoint:n { col - \@@_succ:n { #4 } } + \dim_set_eq:NN \l_tmpd_dim \pgf@x + } + \@@_pgf_rect_node:nnnnn + { \@@_env: - #1 - #2 - block - short } + \l_tmpb_dim \l_tmpa_dim \l_tmpd_dim \l_tmpc_dim +% \end{macrocode} % % \medskip % If the creation of the ``medium nodes'' is required, we create a ``medium @@ -10033,6 +10172,16 @@ version 2005/12/01 or later. \int_compare:nNnTF { #1 } = { #3 } { % \end{macrocode} +% We take into account the case of a block of one row in the ``first row'' or +% the ``end row''. +% \begin{macrocode} + \int_compare:nNnTF { #1 } = 0 + { \l_@@_code_for_first_row_tl } + { + \int_compare:nNnT { #1 } = \l_@@_last_row_int + \l_@@_code_for_last_row_tl + } +% \end{macrocode} % If the block has only one row, we want the label of the block perfectly % aligned on the baseline of the row. That's why we have constructed a % |\pgfcoordinate| on the baseline of the row, in the first column of the array. @@ -10042,7 +10191,7 @@ version 2005/12/01 or later. % \end{macrocode} % We retrieve (in |\pgf@x|) the $x$-value of the center of the block. % \begin{macrocode} - \@@_qpoint:n { #1 - #2 - block } + \@@_qpoint:n { #1 - #2 - block - short } % \end{macrocode} % We put the label of the block which has been composed in |\l_@@_cell_box|. % \begin{macrocode} @@ -10054,11 +10203,11 @@ version 2005/12/01 or later. % % \medskip % If the number of rows is different of $1$, we put the label of the block in -% the center of the node (the label of the block has been composed in +% the center of the (short) node (the label of the block has been composed in % |\l_@@_cell_box|). % \begin{macrocode} { - \pgftransformshift { \@@_qpoint:n { #1 - #2 - block } } + \pgftransformshift { \@@_qpoint:n { #1 - #2 - block - short } } \pgfnode { rectangle } { center } { \box_use_drop:N \l_@@_cell_box } { } { } } @@ -10172,6 +10321,7 @@ version 2005/12/01 or later. } % \end{macrocode} % +% \bigskip % \subsection*{The redefinition of the command \textbackslash dotfill } % % \begin{macrocode} @@ -10199,6 +10349,7 @@ version 2005/12/01 or later. { \dim_compare:nNnT { \box_wd:N \l_@@_cell_box } = \c_zero_dim \@@_dotfill } % \end{macrocode} % +% \bigskip % \subsection*{The command \textbackslash diagbox} % % @@ -10256,7 +10407,8 @@ version 2005/12/01 or later. } % \end{macrocode} % -% \subsection*{The command \textbackslash CodeAfter} +% \bigskip +% \subsection*{The keyword \textbackslash CodeAfter} % % In fact, in this subsection, we define the user command |\CodeAfter| for the % case of the ``normal syntax''. For the case of ``light-syntax'', see the @@ -10286,7 +10438,7 @@ version 2005/12/01 or later. \str_if_eq:eeTF \@currenvir { #1 } { \end { #1 } } % \end{macrocode} -% It this is not the |\end| we are looking for, we put those tokens in +% If this is not the |\end| we are looking for, we put those tokens in % |\g_@@_code_after_tl| and we go on searching for the next command |\end| with % a recursive call to the command |\@@_CodeAfter:n|. % \begin{macrocode} @@ -10302,7 +10454,6 @@ version 2005/12/01 or later. % \bigskip % \subsection*{We process the options at package loading} % -% % % We process the options when the package is loaded (with |\usepackage|) but we % recommend to use |\NiceMatrixOptions| instead. @@ -11151,6 +11302,14 @@ version 2005/12/01 or later. % It's now possible to write |\begin{pNiceMatrix}a&b\\c&d\end{pNiceMatrix}^2| % with the expected result. % +% \subsection*{Changes between versions 4.2 and 4.3} +% +% The horizontal centering of the content of a |\Block| is correct even when an +% instruction such as |!{\qquad}| is used in the preamble of the array. +% +% It's now possible to use the command |\Block| in the ``last row''. +% +% % \PrintIndex % % \tableofcontents diff --git a/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty b/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty index b4a7ec1366c..d286a1bb15c 100644 --- a/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty +++ b/Master/texmf-dist/tex/latex/nicematrix/nicematrix.sty @@ -18,8 +18,8 @@ %% and version 1.3 or later is part of all distributions of %% LaTeX version 2005/12/01 or later. %% -\def\myfileversion{4.2} -\def\myfiledate{2020/06/07} +\def\myfileversion{4.3} +\def\myfiledate{2020/06/12} \RequirePackage{pgfcore} \usepgfmodule{shapes} \RequirePackage{l3keys2e} @@ -2297,9 +2297,9 @@ } \cs_new_protected:Npn \__nicematrix_draw_non_standard_dotted_line: { - \begin { scope } - \exp_args:No \__nicematrix_draw_non_standard_dotted_line:n - { \l__nicematrix_xdots_line_style_tl , \l__nicematrix_xdots_color_tl } + \begin { scope } + \exp_args:No \__nicematrix_draw_non_standard_dotted_line:n + { \l__nicematrix_xdots_line_style_tl , \l__nicematrix_xdots_color_tl } } \cs_new_protected:Npn \__nicematrix_draw_non_standard_dotted_line:n #1 { @@ -3165,7 +3165,7 @@ { \int_compare:nNnT \l_tmpb_tl > { #2 - 1 } { - \int_compare:nNnT \l_tmpb_tl < { #4 + 1 } + \int_compare:nNnT \l_tmpb_tl < { #4 + 1 } { \bool_gset_false:N \g_tmpa_bool } } } @@ -3487,17 +3487,17 @@ { \int_use:N \g__nicematrix_env_int - \__nicematrix_i: - \__nicematrix_j: \l__nicematrix_suffix_tl} } } -\NewDocumentCommand \__nicematrix_Block: { O { } m D < > { } m } +\NewExpandableDocumentCommand \__nicematrix_Block: { O { } m D < > { } m } { \__nicematrix_Block_i #2 \q_stop { #1 } { #3 } { #4 } } \cs_new:Npn \__nicematrix_Block_i #1-#2 \q_stop { \__nicematrix_Block_ii:nnnnn { #1 } { #2 } } \cs_new_protected:Npn \__nicematrix_Block_ii:nnnnn #1 #2 #3 #4 #5 { \tl_set:Nx \l_tmpa_tl { - { \int_use:N \c@iRow } - { \int_use:N \c@jCol } - { \int_eval:n { \c@iRow + #1 - 1 } } - { \int_eval:n { \c@jCol + #2 - 1 } } + { \int_use:N \c@iRow } + { \int_use:N \c@jCol } + { \int_eval:n { \c@iRow + #1 - 1 } } + { \int_eval:n { \c@jCol + #2 - 1 } } } \seq_gput_left:NV \g__nicematrix_pos_of_blocks_seq \l_tmpa_tl \seq_gput_left:Nx \g__nicematrix_blocks_seq @@ -3519,7 +3519,7 @@ \group_begin: \keys_set:nn { NiceMatrix / Block } { #5 } \bool_lazy_or:nnTF - { \int_compare_p:nNn { #3 } > \c@iRow } + { \int_compare_p:nNn { #3 } > \g__nicematrix_row_total_int } { \int_compare_p:nNn { #4 } > \c@jCol } { \msg_error:nnnn { nicematrix } { Block~too~large } { #1 } { #2 } } { @@ -3541,6 +3541,39 @@ { \__nicematrix_env: - #1 - #2 - block } \l_tmpb_dim \l_tmpa_dim \l_tmpd_dim \l_tmpc_dim \end { pgfscope } + \dim_set_eq:NN \l_tmpb_dim \c_max_dim + \int_step_inline:nnn \l__nicematrix_first_row_int \g__nicematrix_row_total_int + { + \cs_if_exist:cT + { pgf @ sh @ ns @ \__nicematrix_env: - ##1 - #2 } + { + \pgfpointanchor { \__nicematrix_env: - ##1 - #2 } { west } + \dim_set:Nn \l_tmpb_dim { \dim_min:nn \l_tmpb_dim \pgf@x } + } + } + \dim_compare:nNnT \l_tmpb_dim = \c_max_dim + { + \__nicematrix_qpoint:n { col - #2 } + \dim_set_eq:NN \l_tmpb_dim \pgf@x + } + \dim_set:Nn \l_tmpd_dim { - \c_max_dim } + \int_step_inline:nnn \l__nicematrix_first_row_int \g__nicematrix_row_total_int + { + \cs_if_exist:cT + { pgf @ sh @ ns @ \__nicematrix_env: - ##1 - #4 } + { + \pgfpointanchor { \__nicematrix_env: - ##1 - #4 } { east } + \dim_set:Nn \l_tmpd_dim { \dim_max:nn \l_tmpd_dim \pgf@x } + } + } + \dim_compare:nNnT \l_tmpd_dim = { - \c_max_dim } + { + \__nicematrix_qpoint:n { col - \__nicematrix_succ:n { #4 } } + \dim_set_eq:NN \l_tmpd_dim \pgf@x + } + \__nicematrix_pgf_rect_node:nnnnn + { \__nicematrix_env: - #1 - #2 - block - short } + \l_tmpb_dim \l_tmpa_dim \l_tmpd_dim \l_tmpc_dim \bool_if:NT \l__nicematrix_medium_nodes_bool { \__nicematrix_pgf_rect_node:nnn @@ -3550,14 +3583,20 @@ } \int_compare:nNnTF { #1 } = { #3 } { + \int_compare:nNnTF { #1 } = 0 + { \l__nicematrix_code_for_first_row_tl } + { + \int_compare:nNnT { #1 } = \l__nicematrix_last_row_int + \l__nicematrix_code_for_last_row_tl + } \pgfextracty \l_tmpa_dim { \__nicematrix_qpoint:n { row - #1 - base } } - \__nicematrix_qpoint:n { #1 - #2 - block } + \__nicematrix_qpoint:n { #1 - #2 - block - short } \pgftransformshift { \pgfpoint \pgf@x \l_tmpa_dim } \pgfnode { rectangle } { base } { \box_use_drop:N \l__nicematrix_cell_box } { } { } } { - \pgftransformshift { \__nicematrix_qpoint:n { #1 - #2 - block } } + \pgftransformshift { \__nicematrix_qpoint:n { #1 - #2 - block - short } } \pgfnode { rectangle } { center } { \box_use_drop:N \l__nicematrix_cell_box } { } { } } -- cgit v1.2.3