summaryrefslogtreecommitdiff
path: root/Master
diff options
context:
space:
mode:
Diffstat (limited to 'Master')
-rw-r--r--Master/tlpkg/archive/tlrepo-from-minimals.pl (renamed from Master/tlpkg/dev/tlrepo-from-minimals.pl)0
-rwxr-xr-xMaster/tlpkg/dev/install-tl-using-TLDownload1994
2 files changed, 0 insertions, 1994 deletions
diff --git a/Master/tlpkg/dev/tlrepo-from-minimals.pl b/Master/tlpkg/archive/tlrepo-from-minimals.pl
index b4c33855c8c..b4c33855c8c 100644
--- a/Master/tlpkg/dev/tlrepo-from-minimals.pl
+++ b/Master/tlpkg/archive/tlrepo-from-minimals.pl
diff --git a/Master/tlpkg/dev/install-tl-using-TLDownload b/Master/tlpkg/dev/install-tl-using-TLDownload
deleted file mode 100755
index 1731680dab8..00000000000
--- a/Master/tlpkg/dev/install-tl-using-TLDownload
+++ /dev/null
@@ -1,1994 +0,0 @@
-#!/usr/bin/env perl
-# $Id: install-tl 15740 2009-10-10 15:30:56Z karl $
-#
-# Copyright 2007, 2008, 2009 Reinhard Kotucha, Norbert Preining
-# This file is licensed under the GNU General Public License version 2
-# or any later version.
-#
-# Be careful when changing wording: Every normal informational message
-# output here must be recognized by the long grep in tl-update-tlnet.
-#
-# TODO:
-# - with -gui pop up a transient window showing:
-# testing for compressed archive packages ...
-# testing for uncompressed live system ...
-# testing for network access ...
-# loading tlpdb, this can take some time ...
-# (that, and maybe some others can be done with the waitVariableX
-# thingy as described in the Perl/Tk book in the chapter that can be
-# found on the net) (Werner 28.10.08)
-# - at the end of the installation after the welcome message if there
-# was an error during installation (grep for Error in the logfile)
-# then give a warning. (email hh tlbuild 2009-06-03)
-
-my $svnrev = '$Revision: 15740 $';
-$svnrev =~ m/: ([0-9]+) /;
-$::installerrevision = $1;
-
-# taken from 00texlive.config: release, $tlpdb->config_release;
-our $texlive_release;
-
-BEGIN {
- $^W = 1;
- my $Master;
- my $me = $0;
- $me =~ s!\\!/!g if $^O =~ /^MSWin(32|64)$/i;
- if ($me =~ m!/!) {
- ($Master = $me) =~ s!(.*)/[^/]*$!$1!;
- } else {
- $Master = ".";
- }
- $::installerdir = $Master;
-
- # All platforms: add the installer modules
- unshift (@INC, "$::installerdir/tlpkg");
-}
-
-use Cwd 'abs_path';
-use Getopt::Long qw(:config no_autoabbrev);
-use Pod::Usage;
-
-use TeXLive::TLUtils qw(platform platform_desc
- which getenv win32 unix info log debug tlwarn ddebug tldie
- get_system_tmpdir member process_logging_options rmtree
- mkdirhier make_var_skeleton make_local_skeleton install_package copy
- install_packages dirname setup_programs welcome welcome_paths);
-#use TeXLive::TLMedia;
-use TeXLive::TLPOBJ;
-use TeXLive::TLPDB;
-use TeXLive::TLConfig;
-use TeXLive::TLDownload;
-
-if (win32) {
- require TeXLive::TLWinGoo;
- TeXLive::TLWinGoo->import( qw(
- &win_version
- &is_vista
- &admin
- &non_admin
- &reg_country
- &expand_string
- &global_tmpdir
- &get_system_path
- &get_user_path
- &setenv_reg
- &unsetenv_reg
- &adjust_reg_path_for_texlive
- &register_extension
- &unregister_extension
- &register_file_type
- &unregister_file_type
- &broadcast_env
- &update_assocs
- &add_desktop_shortcut
- &add_menu_shortcut
- &remove_desktop_shortcut
- &remove_menu_shortcut
- &create_uninstaller
- ));
-}
-
-use strict;
-
-# debugging/logging cmd lines options:
-# -q shut up terminal output but warning messages
-# -v do a bit of debugging to stdout and logfile
-# repeated use increases the value of verbosity
-#
-@::LOGLINES = ();
-#
-# $install{$packagename} == 1 if it should be installed
-my %install;
-
-#
-# the different modules have to assign a code blob to this global variable
-# which starts the installation.
-# Example: In install-menu-text.pl there is
-# $::run_menu = \&run_menu_text;
-#
-$::run_menu = sub { die "no UI defined." ; };
-
-# the default scheme to be installed
-my $default_scheme='scheme-full';
-
-# some arrays where the lists of collections to be installed are saved
-# our for menus
-our @collections_std;
-our @collections_lang;
-our @collections_lang_doc;
-# The global variable %vars is an associative list which contains all
-# variables and their values which can be changed by the user.
-# needs to be our since TeXLive::TLUtils uses it
-#
-# The following values are taken from the remote tlpdb using the
-# $tlpdb->option_XXXXX
-# settings (i.e., taken from tlpkg/tlpsrc/00texlive.installation.tlpsrc
-#
-# 'option_path' => 0,
-# 'option_sys_bin' => '/usr/local/bin',
-# 'option_sys_man' => '/usr/local/man',
-# 'option_sys_info' => '/usr/local/info',
-# 'option_doc' => 1,
-# 'option_src' => 1,
-# 'option_fmt' => 0,
-# 'option_letter' => 0,
-our %vars=( # 'n_' means 'number of'.
- 'this_platform' => '',
- 'n_systems_available' => 0,
- 'n_systems_selected' => 0,
- 'n_collections_selected' => 0,
- 'n_collections_available' => 0,
- 'total_size' => 0,
- 'src_splitting_supported' => 1,
- 'doc_splitting_supported' => 1,
- 'selected_scheme' => $default_scheme,
- 'from_dvd' => 0,
- );
-
-# option handling
-my $opt_from_dvd = 0;
-my $opt_gui = (win32() ? "wizard" : "text");
-my $opt_help = 0;
-my $opt_location = "";
-my $opt_no_gui = 0;
-my $opt_nonadmin = 0;
-my $opt_portable = 0;
-my $opt_print_arch = 0;
-my $opt_profileseed = "";
-my $opt_profile = "";
-my $opt_scheme = "";
-my $opt_custom_bin;
-my $opt_version = 0;
-my $opt_force_arch;
-
-# show all options even those not relevant for that arch
-$::opt_all_options = 0;
-
-# default language for GUI installer
-$::lang = "en";
-
-# use the fancy directory selector for TEXDIR
-$::alternative_selector = 0;
-
-# do not debug translations by default
-$::debug_translation = 0;
-
-#
-# some strings to describe the different meanings of option_file_assoc
-$::fileassocdesc[0] = "None";
-$::fileassocdesc[1] = "Only new";
-$::fileassocdesc[2] = "All";
-
-# if we find a file installation.profile we ask the user whether we should
-# continue with the installation
-# note, we are in the installer directory.
-if (-r "installation.profile") {
- print "ABORTED INSTALLATION FOUND: installation.profile\n";
- print "Do you want to continue with the exact same settings as before (y/N): ";
- my $answer = <STDIN>;
- if ($answer =~ m/^y(es)?$/i) {
- $opt_profile = "installation.profile";
- }
-}
-
-
-# first process verbosity/quiet options
-process_logging_options();
-# now the others
-GetOptions(
- "custom-bin=s" => \$opt_custom_bin,
- "fancyselector" => \$::alternative_selector,
- "from_dvd" => \$opt_from_dvd,
- "gui:s" => \$opt_gui,
- "lang=s" => \$::opt_lang,
- "location|url|repository|repo=s" => \$opt_location,
- "no-cls", # $::opt_no_cls in install-menu-text-pl
- "no-gui" => \$opt_no_gui,
- "non-admin" => \$opt_nonadmin,
- "portable" => \$opt_portable,
- "print-arch" => \$opt_print_arch,
- "force-arch=s" => \$opt_force_arch,
- "debug-translation" => \$::debug_translation,
- "profile-seed=s" => \$opt_profileseed,
- "profile=s" => \$opt_profile,
- "scheme=s" => \$opt_scheme,
- "all-options" => \$::opt_all_options,
- "version" => \$opt_version,
- "help|?" => \$opt_help) or pod2usage(1);
-
-if ($opt_gui eq "") {
- # the --gui option was given with an empty argument, set it to perltk
- $opt_gui = "perltk";
-}
-if ($opt_gui eq "expert") {
- $opt_gui = "perltk";
-}
-
-if (win32()) {
- pod2usage(-exitstatus => 0,
- -verbose => 2,
- -noperldoc => 1,
- -output => \*STDOUT) if $opt_help;
-} else {
- pod2usage(-exitstatus => 0, -verbose => 2, -file => $0) if $opt_help;
-}
-
-if ($opt_version) {
- print "install-tl (TeX Live Cross Platform Installer)",
- " revision $::installerrevision\n";
- if (open (REL_TL, "$::installerdir/release-texlive.txt")) {
- # print first and last lines, which have the TL version info.
- my @rel_tl = <REL_TL>;
- print $rel_tl[0];
- print $rel_tl[$#rel_tl];
- close (REL_TL);
- }
- if ($::opt_verbosity > 0) {
- print "Revision of modules:";
- print "\nTLConfig: " . TeXLive::TLConfig->module_revision();
- print "\nTLUtils: " . TeXLive::TLUtils->module_revision();
- print "\nTLPOBJ: " . TeXLive::TLPOBJ->module_revision();
- print "\nTLPDB: " . TeXLive::TLPDB->module_revision();
- print "\nTLWinGoo: " . TeXLive::TLWinGoo->module_revision() if win32();
- print "\n";
- }
- exit 0;
-}
-
-if ($#ARGV >= 0) {
- # we still have arguments left, should only be gui, otherwise die
- if ($ARGV[0] =~ m/^gui$/i) {
- $opt_gui = "perltk";
- } else {
- die "$0: Extra arguments `@ARGV'; try --help if you need it.\n";
- }
-}
-
-
-if (defined($::opt_lang)) {
- $::lang = $::opt_lang;
-}
-
-if ($opt_profile) {
- if (-r $opt_profile) {
- info("Automated TeX Live installation using profile: $opt_profile\n");
- } else {
- $opt_profile = "";
- info("Profile $opt_profile not readable, continuing in interactive mode.\n");
- }
-}
-
-if ($opt_nonadmin and win32()) {
- non_admin();
-}
-
-
-# the TLPDB instances we will use. $tlpdb is for the one from the installation
-# media, while $localtlpdb is for the new installation
-# $tlpdb must be our because it is used in install-menu-text.pl
-our $tlpdb;
-my $localtlpdb;
-my $location;
-
-# $finished == 1 if the menu call already did the installation
-my $finished = 0;
-@::info_hook = ();
-
-my $system_tmpdir=get_system_tmpdir();
-my $media;
-
-# special uses of install-tl:
-if ($opt_print_arch) {
- print platform()."\n";
- exit 0;
-} elsif ($opt_portable) {
- &do_portable ();
-}
-
-
-# continuing with normal install
-
-# check as soon as possible for GUI functionality to give people a chance
-# tp interrupt.
-if (($opt_gui ne "text") && !$opt_no_gui && ($opt_profile eq "")) {
- # try to load Tk.pm, but don't die if it doesn't work
- eval { require Tk; };
- if ($@) {
- # that didn't work out, so warn the user and continue with text mode
- tlwarn("Cannot load Tk, maybe something is missing and\n");
- tlwarn("maybe http://tug.org/texlive/distro.html#perltk can help.\n");
- tlwarn("Error message from loading Tk:\n");
- tlwarn(" $@\n");
- tlwarn("Continuing in text mode...\n");
- $opt_gui = "text";
- }
- eval { my $foo = Tk::MainWindow->new; $foo->destroy; };
- if ($@) {
- tlwarn("perl/Tk unusable, cannot create main windows.\n");
- if (platform() eq "universal-darwin") {
- tlwarn("That could be because X11 is not installed or started.\n");
- }
- tlwarn("Error message from creating MainWindow:\n");
- tlwarn(" $@\n");
- tlwarn("Continuing in text mode...\n");
- $opt_gui = "text";
- }
- if ($opt_gui eq "text") {
- # we switched from GUI to non-GUI mode, tell the user and wait a bit
- tlwarn("\nSwitching to text mode installer, if you want to cancel, do it now.\n");
- tlwarn("Waiting for 3 second\n");
- sleep(3);
- }
-}
-
-#
-if (defined($opt_force_arch)) {
- tlwarn("Overriding platform to $opt_force_arch\n");
- $::_platform_ = $opt_force_arch;
-}
-
-# initialize the correct platform
-platform();
-$vars{'this_platform'} = $::_platform_;
-
-# we do not support cygwin < 1.7, so check for that
-if (!$opt_custom_bin && (platform() eq "i386-cygwin")) {
- chomp( my $un = `uname -r`);
- if ($un =~ m/^(\d+)\.(\d+)\./) {
- if ($1 < 2 && $2 < 7) {
- tldie("\nSorry, the TL binaries require at least cygwin 1.7.\n");
- }
- }
-}
-
-if (!setup_programs ("$::installerdir/tlpkg/installer", "$::_platform_")) {
- tldie("$0: Goodbye.\n");
-}
-
-# determine where we will find the distribution to install from.
-#
-$location = $opt_location;
-$location || ($location = "$::installerdir");
-if ($location =~ m!^(ctan$|(http|ftp)://)!i) {
- $location =~ s,/(tlpkg|archive)?/*$,,; # remove any trailing tlpkg or /
- if ($location =~ m/^ctan$/i) {
- $location = TeXLive::TLUtils::give_ctan_mirror();
- } elsif ($location =~ m/^$TeXLiveServerURL/) {
- my $mirrorbase = TeXLive::TLUtils::give_ctan_mirror_base();
- $location =~ s,^($TeXLiveServerURL|ctan$),$mirrorbase,;
- }
- $TeXLiveURL = $location;
- $media = 'NET';
-} else {
- # remove leading file:/+ part
- $location =~ s!^file://*!/!i;
- $location = abs_path($location);
- # remove trailing \ or / (e.g. root of dvd drive on w32)
- $location =~ s,[\\\/]$,,;
- if (-d "$location/$Archive") {
- $media='CD';
- } elsif (-d "$location/texmf/web2c") {
- $media='DVD';
- } else {
- if ($opt_location) {
- # user gave a --location but nothing can be found there, so die
- die "$0: cannot find installation source at $opt_location.\n";
- }
- # no --location given, but NET installation
- $TeXLiveURL = $location = TeXLive::TLUtils::give_ctan_mirror();
- $media = 'NET';
- }
-}
-info("Installing TeX Live $TeXLive::TLConfig::ReleaseYear from: $location\n");
-
-info("Platform: ", platform(), " => \'", platform_desc(platform), "\'\n");
-if ($opt_custom_bin) {
- if (-d $opt_custom_bin) {
- info("Platform overridden, binaries taken from $opt_custom_bin\nand put into bin/custom!\n");
- } else {
- tldie("Argument for -custom-bin needs to be directory with TeX Live binaries!\n");
- }
-}
-if ($media eq "DVD") {
- info("Distribution: live (uncompressed)\n");
-} elsif ($media eq "CD") {
- info("Distribution: inst (compressed)\n");
-} elsif ($media eq "NET") {
- info("Distribution: net (downloading)\n");
- info("Using URL: $TeXLiveURL\n");
- my ($prot, $server, $subpath) = ($TeXLiveURL =~ m!(http|ftp)://([^/]*)(/.*)$!i);
- if ($TeXLive::TLDownload::net_lib_avail) {
- info("Trying to setup permanent connection to server using Net::$prot...\n");
- $::current_server = TeXLive::TLDownload->new(mode => $prot,
- server => $server);
- if ($::current_server->start_connection) {
- info("... success\n");
- } else {
- $::current_server = undef;
- info("connection setup not successful, falling back to wget mode.\n");
- }
- }
-} else {
- info("Distribution: $media\n");
-}
-info("Directory for temporary files: $system_tmpdir\n");
-
-if ($opt_from_dvd and ($media ne "DVD")) {
- print "Not running from DVD; 'from_dvd' option not applicable\n";
- $opt_from_dvd = 0;
-}
-$vars{'from_dvd'} = $opt_from_dvd;
-
-load_tlpdb();
-
-log("Installer revision: $::installerrevision\n");
-log("Database revision: " . $tlpdb->config_revision . "\n");
-
-# correctly set the splitting support
-# for DVD we always support splitting
-if (($media eq "NET") || ($media eq "CD")) {
- $vars{'src_splitting_supported'} = $tlpdb->config_src_container;
- $vars{'doc_splitting_supported'} = $tlpdb->config_doc_container;
-}
-$texlive_release = $tlpdb->config_release;
-# if the release from the remote TLPDB does not agree with the
-# TLConfig::ReleaseYear in the first 4 places break out here.
-# Why only the first four places: some optional network distributions
-# might use
-# release/2009-foobar
-if ($media eq "NET" &&
- $texlive_release !~ m/^$TeXLive::TLConfig::ReleaseYear/) {
- die "The release version of the installation source and\nthe installation media do not agree:\nsource: $texlive_release\nmedia: $TeXLive::TLConfig::ReleaseYear\nPlease report to tex-live\@tug.org";
-}
-set_platforms_supported();
-set_texlive_default_dirs();
-set_install_platform();
-initialize_collections();
-
-# initialize the scheme from the command line value, if given.
-if ($opt_scheme) {
- # add the scheme- prefix if they didn't give it.
- $opt_scheme = "scheme-$opt_scheme" if $opt_scheme !~ /^scheme-/;
- my $scheme = $tlpdb->get_package($opt_scheme);
- if (defined($scheme)) {
- select_scheme($opt_scheme); # select it
- } else {
- tlwarn("Scheme $opt_scheme not defined, ignoring it.\n");
- }
-}
-
-
-if ($opt_profile eq "") {
- if ($opt_profileseed) {
- read_profile("$opt_profileseed");
- }
- # do the normal interactive installation.
- #
- # here we could load different menu systems. Currently several things
- # are "our" so that the menu implementation can use it. The $tlpdb, the
- # %var, and all the @collection*
- # install-menu-*.pl have to assign a code ref to $::run_menu which is
- # run, and should change ONLY stuff in %vars
- # The allowed keys in %vars should be specified somewhere ...
- # the menu implementation should return
- # MENU_INSTALL do the installation
- # MENU_ABORT abort every action immediately, no cleanup
- # MENU_QUIT try to quit and clean up mess
- our $MENU_INSTALL = 0;
- our $MENU_ABORT = 1;
- our $MENU_QUIT = 2;
- our $MENU_ALREADYDONE = 3;
- $opt_gui = "text" if ($opt_no_gui);
- # finally do check for additional screens in the $opt_gui setting:
- # format:
- # --gui <plugin>:<a1>,<a2>,...
- # which will passed to run_menu (<a1>, <a2>, ...)
- #
- my @runargs;
- if ($opt_gui =~ m/^([^:]*):(.*)$/) {
- $opt_gui = $1;
- @runargs = split ",", $2;
- }
- if (-r "$::installerdir/tlpkg/installer/install-menu-${opt_gui}.pl") {
- require("installer/install-menu-${opt_gui}.pl");
- } else {
- tlwarn("UI plugin $opt_gui not found,\n");
- tlwarn("Using text mode installer.\n");
- require("installer/install-menu-text.pl");
- }
-
- # before we start the installation we check for the existence of
- # a previous installation, and in case we ship inform the UI
- {
- my $tlmgrwhich = which("tlmgr");
- if ($tlmgrwhich) {
- my $dn = dirname($tlmgrwhich);
- $dn = abs_path("$dn/../..");
- # The "make Karl happy" case, check that we are not running install-tl
- # from the same tree where tlmgr is hanging around
- my $install_tl_root = abs_path($::installerdir);
- my $tlpdboldpath = "$dn/$TeXLive::TLConfig::InfraLocation/$TeXLive::TLConfig::DatabaseName";
- if (-r $tlpdboldpath && $dn ne $install_tl_root) {
- debug ("found old installation in $dn\n");
- push @runargs, "-old-installation-found=$dn";
- }
- }
- }
-
- my $ret = &{$::run_menu}(@runargs);
- if ($ret == $MENU_QUIT) {
- do_cleanup();
- flushlog();
- exit(1);
- }
- if ($ret == $MENU_ABORT) {
- # omit do_cleanup().
- flushlog();
- exit(2);
- }
- if ($ret == $MENU_ALREADYDONE) {
- debug("run_menu has already done the work ... cleaning up.\n");
- $finished = 1;
- }
- if (!$finished && ($ret != $MENU_INSTALL)) {
- tlwarn("Unknown return value of run_menu: $ret\n");
- exit(3);
- }
-} else {
- read_profile($opt_profile);
-}
-
-if (!$finished) {
- # do the actual installation
- # win32: first, remove trailing slash from texdir[w]
- # in case it is the root of a drive
- $vars{'TEXDIR'} =~ s![/\\]$!!;
- $vars{'TEXDIRW'} =~ s![/\\]$!!;
- info("Installing to: $vars{TEXDIRW}\n");
- do_installation();
-}
-
-do_cleanup();
-
-exit(0);
-
-
-###################################################################
-#
-# FROM HERE ON ONLY SUBROUTINES
-# NO VARIABLE DECLARATIONS
-#
-###################################################################
-
-sub do_installation {
- if (win32()) {
- non_admin() if !$vars{'option_w32_multi_user'};
- }
- if ($vars{'n_collections_selected'} <= 0) {
- tlwarn("Nothing selected, nothing to install, exiting!\n");
- exit 1;
- }
- # do the actual installation
- my $h;
- prepare_installation();
- if (!$vars{'from_dvd'}) {
- calc_depends();
- save_options_into_tlpdb();
- do_install_packages();
- if ($opt_custom_bin) {
- $vars{'this_platform'} = "custom";
- my $TEXDIR="$vars{'TEXDIR'}";
- mkdirhier("$TEXDIR/bin/custom");
- for my $f (<$opt_custom_bin/*>) {
- copy($f, "$TEXDIR/bin/custom");
- }
- }
- }
- # now we save every scheme that is fully covered by the stuff we have
- # installed to the $localtlpdb
- foreach my $s ($tlpdb->schemes) {
- my $stlp = $tlpdb->get_package($s);
- die ("That cannot happen, $s not defined in tlpdb") unless defined($stlp);
- my $incit = 1;
- foreach my $d ($stlp->depends) {
- if (!defined($localtlpdb->get_package($d))) {
- $incit = 0;
- last;
- }
- }
- if ($incit) {
- $localtlpdb->add_tlpobj($stlp);
- }
- }
- $localtlpdb->save unless $vars{'from_dvd'};
- do_postinst_stuff();
- if (win32()) {
- print welcome();
- } else {
- print welcome_paths();
- }
-}
-
-# do_postinst_stuff has to fix up the texmf tree and install some missing
-# files. The things to do are taken from the install-live.sh installer
-# of former times, and should be critically checked.
-sub do_postinst_stuff {
- my $TEXDIR="$vars{'TEXDIR'}";
- my $TEXDIRW="$vars{'TEXDIRW'}";
- my $TEXMFSYSVAR="$vars{'TEXMFSYSVAR'}";
- my $TEXMFSYSCONFIG="$vars{'TEXMFSYSCONFIG'}";
- my $TEXMFLOCAL="$vars{'TEXMFLOCAL'}";
- my $tmv;
-
- do_texmf_cnf() unless ($opt_portable);
-
- #
- # clean up useless files in texmf-dist/tlpkg as this is only
- # created by the relocatable packages
- if (-d "$TEXDIR/$TeXLive::TLConfig::RelocTree/tlpkg") {
- rmtree("$TEXDIR/TeXLive::TLConfig::RelocTree/tlpkg");
- }
-
- # final program execution
- # we have to do several things:
- # - clean the environment from spurious TEXMF related variables
- # - add the bin dir to the PATH
- # - select perl interpreter and set the correct perllib
- # - run the programs
-
- # Step 1: Clean the environment
- my @TMFVARS0=qw(VARTEXFONTS
- TEXMF SYSTEXMF VARTEXFONTS
- TEXMFDBS WEB2C TEXINPUTS TEXFORMATS MFBASES MPMEMS TEXPOOL MFPOOL MPPOOL
- PSHEADERS TEXFONTMAPS TEXPSHEADERS TEXCONFIG TEXMFCNF);
- my @TMFVARS1=qw(TEXMFMAIN TEXMFDIST TEXMFLOCAL TEXMFSYSVAR TEXMFSYSCONFIG
- TEXMFHOME TEXMFVAR TEXMFCONFIG);
-
- if (defined($ENV{'TEXMFCNF'}) and !$vars{'from_dvd'} and !$opt_portable) {
- print "WARNING: environment variable TEXMFCNF is set.
-You should know what you are doing.
-We will remove that for the post install actions, but all further
-operations might be disturbed.\n\n";
- }
- foreach $tmv (@TMFVARS0) {
- delete $ENV{$tmv} if (defined($ENV{$tmv}));
- }
- if (!$opt_portable) {
- foreach $tmv (@TMFVARS1) {
- delete $ENV{$tmv} if (defined($ENV{$tmv}));
- }
- }
- if ($vars{'from_dvd'}) {
- $ENV{'TEXMFSYSVAR'} = $vars{'TEXMFSYSVAR'};
- $ENV{'TEXMFCNF'} = $vars{'TEXMFSYSVAR'}."/web2c";
- }
-
- # Step 2: Setup the PATH, switch to the new Perl
-
- my $pathsep=(win32)? ';' : ':';
- my $plat_bindir="$TEXDIR/bin/$vars{'this_platform'}";
- my $perl_bindir="$TEXDIR/tlpkg/tlperl/bin";
- my $perl_libdir="$TEXDIR/tlpkg/tlperl/lib";
-
-## This won't do any good;
-## have to remove other tex directories in calling batchfile
-# if (win32) {
-# debug("Removing other TeXs from path\n");
-# my @newpt = ();
-# foreach my $d (split (';', $ENV{'PATH'})) {
-# push @newpt, $d unless TeXLive::TLWinGoo::is_a_texdir($d);
-# }
-# $ENV{'PATH'} = join($pathsep, @newpt);
-# debug("Path after removals(s):\n $ENV{'PATH'}\n");
-# }
-
- debug("Prepending $plat_bindir to PATH\n");
-
- $ENV{'PATH'}="$plat_bindir" . "$pathsep" . "$ENV{'PATH'}";
-
- if (win32) {
- debug("Prepending $perl_bindir to PATH\n");
- $ENV{'PATH'}="$perl_bindir" . "$pathsep" . "$ENV{'PATH'}";
- $ENV{'PATH'} =~ s!/!\\!g;
- }
-
- debug("\nNew PATH is now:\n");
- foreach my $dir (split $pathsep, $ENV{'PATH'}) {
- debug(" $dir\n");
- }
- debug("\n");
-
- if (win32) {
- $ENV{'PERL5LIB'}="$perl_libdir";
- }
-
- #
- # post install actions
- #
-
- # in case we are running from DVD we use the tlpdb from the DVD, otherwise
- # the one we have locally created, for all the further actions
- my $usedtlpdb = $vars{'from_dvd'} ? $tlpdb : $localtlpdb;
-
-
- if (win32()) {
- debug "Actual environment:\n".`set`."\n\n";
- debug 'Effective TEXMFCNF: '.`kpsewhich -expand-path=\$TEXMFCNF`."\n";
- }
-
- # TODO: can the following two clauses be merged?
- if (win32()) {
- create_uninstaller($vars{'TEXDIR'}, $vars{'TEXDIRW'},
- $vars{'TEXMFSYSVAR'}, $vars{'TEXMFSYSCONFIG'});
- }
- # (re-)initialize batchfile for uninstalling shortcuts
- if (win32() and !$opt_portable) {
- mkdirhier("$TEXDIRW/tlpkg/installer") if $vars{'from_dvd'};
- }
-
- # Step 4: run the programs
-
- if (!$opt_portable and !$vars{'from_dvd'}) {
- info("running mktexlsr $TEXDIR/texmf-dist $TEXDIR/texmf\n");
- system('mktexlsr', "$TEXDIR/texmf-dist", "$TEXDIR/texmf");
- }
-
- # we have to generate the various config file. That could be done with
- # texconfig generate * but Win32 does not have texconfig. But we have
- # $localtlpdb and this is simple code, so do it directly, i.e., duplicate
- # the code from the various generate-*.pl scripts
-
- info("writing fmtutil.cnf data to $TEXMFSYSVAR/web2c/fmtutil.cnf\n");
- TeXLive::TLUtils::create_fmtutil($usedtlpdb,
- "$TEXMFSYSVAR/web2c/fmtutil.cnf",
- "$TEXMFLOCAL/web2c/fmtutil-local.cnf");
-
- mkdirhier "$vars{'TEXMFSYSCONFIG'}/web2c";
- info("writing updmap.cfg to $TEXMFSYSCONFIG/web2c/updmap.cfg\n");
- TeXLive::TLUtils::create_updmap ($usedtlpdb,
- "$TEXMFSYSCONFIG/web2c/updmap.cfg",
- "$TEXMFLOCAL/web2c/updmap-local.cfg");
-
- info("writing language.dat data to $TEXMFSYSVAR/tex/generic/config/language.dat\n");
- TeXLive::TLUtils::create_language_dat($usedtlpdb,
- "$TEXMFSYSVAR/tex/generic/config/language.dat",
- "$TEXMFLOCAL/tex/generic/config/language-local.dat");
-
- info("writing language.def data to $TEXMFSYSVAR/tex/generic/config/language.def\n");
- TeXLive::TLUtils::create_language_def($usedtlpdb,
- "$TEXMFSYSVAR/tex/generic/config/language.def",
- "$TEXMFLOCAL/tex/generic/config/language-local.def");
-
- info("running mktexlsr $TEXMFSYSVAR\n");
- system('mktexlsr', "$TEXMFSYSVAR");
-
- info("running updmap-sys... ");
- # system('updmap-sys', '--nohash');
- log(`updmap-sys --nohash 2>&1`);
- info("done\n");
-
- info("re-running mktexlsr $TEXMFSYSVAR\n");
- system('mktexlsr', "$TEXMFSYSVAR");
-
- # now work through the options if specified at all
-
- # letter instead of a4
- if ($vars{'option_letter'}) {
- info("Setting default paper size to letter\n");
- system("tlmgr", "paper", "letter");
- }
-
- # all formats option
- if ($vars{'option_fmt'}) {
- info("pre-generating all format files (fmtutil-sys --all), be patient...");
- log(`fmtutil-sys --all 2>&1`);
- info("done\n");
- }
-
- #
- # do path adjustments: On Windows add/remove to PATH etc, on Unix
- # set symlinks
- do_path_adjustments() if $vars{'option_path'};
-
- # no do the system integration:
- # on unix this means setting up symlinks
- # on w32 this means adding to path, settting registry values
- # on both, we run the postaction directives of the tlp
- do_tlpdb_postactions();
-}
-
-
-sub do_tlpdb_postactions {
- info ("running package specific postactions\n");
- # Run the post installation code in the postaction tlpsrc entries
- my $usedtlpdb = $vars{'from_dvd'} ? $tlpdb : $localtlpdb;
- foreach my $package (sort keys %install) {
- if ($install{$package}) {
- &TeXLive::TLUtils::do_postaction("install",
- $usedtlpdb->get_package($package),
- $vars{'option_file_assocs'},
- $vars{'option_desktop_integration'},
- $vars{'option_post_code'});
- }
- }
- info ("finished with package specific postactions\n");
-}
-
-sub do_path_adjustments {
- info ("running path adjustment actions\n");
- if (win32()) {
- TeXLive::TLUtils::w32_add_to_path($vars{'TEXDIR'}.'/bin/win32',
- $vars{'option_w32_multi_user'});
- #
- # from_dvd stuff
- # setenv_reg('TEXMFSYSVAR', $vars{'TEXMFSYSVAR'}) if $vars{'from_dvd'};
- setenv_reg('TEXMFCNF', $vars{'TEXMFSYSVAR'}.'/web2c') if $vars{'from_dvd'};
- broadcast_env();
- } else {
- TeXLive::TLUtils::add_symlinks($vars{'TEXDIR'}, $vars{'this_platform'},
- $vars{'option_sys_bin'}, $vars{'option_sys_man'},
- $vars{'option_sys_info'});
- }
- info ("finished with path adjustment actions\n");
-}
-
-
-# we have to adjust the texmf.cnf file to the paths set in the configuration!
-sub do_texmf_cnf {
- open(TMF,"<$vars{'TEXDIR'}/texmf/web2c/texmf.cnf")
- or die "$vars{'TEXDIR'}/texmf/web2c/texmf.cnf not found: $!";
- my @texmfcnflines = <TMF>;
- close(TMF);
- my @newtmf;
- my @changedtmf;
- # we have to find TEXMFLOCAL TEXMFSYSVAR and TEXMFHOME
- foreach my $line (@texmfcnflines) {
- if ($line =~ m/^TEXMFLOCAL/) {
- # by default TEXMFLOCAL = TEXDIR/../texmf-local, if this is the case
- # we don't have to change anything from the default
- my $deftmlocal = dirname($vars{'TEXDIR'});
- $deftmlocal .= "/texmf-local";
- if ("$vars{'TEXMFLOCAL'}" eq "$deftmlocal") {
- push @newtmf, $line;
- } else {
- push @newtmf, "TEXMFLOCAL = $vars{'TEXMFLOCAL'}\n";
- push @changedtmf, "TEXMFLOCAL = $vars{'TEXMFLOCAL'}\n";
- }
- } elsif ($line =~ m/^TEXMFSYSVAR/) {
- # by default TEXMFSYSVAR = TEXDIR/texmf-var, if this is the case
- # we don't have to change anything from the default
- if ("$vars{'TEXMFSYSVAR'}" eq "$vars{'TEXDIR'}/texmf-var") {
- push @newtmf, $line;
- } else {
- push @newtmf, "TEXMFSYSVAR = $vars{'TEXMFSYSVAR'}\n";
- push @changedtmf, "TEXMFSYSVAR = $vars{'TEXMFSYSVAR'}\n";
- }
- } elsif ($line =~ m/^TEXMFSYSCONFIG/) {
- # by default TEXMFSYSCONFIG = TEXDIR/texmf-config, if this is the case
- # we don't have to change anything from the default
- if ("$vars{'TEXMFSYSCONFIG'}" eq "$vars{'TEXDIR'}/texmf-config") {
- push @newtmf, $line;
- } else {
- push @newtmf, "TEXMFSYSCONFIG = $vars{'TEXMFSYSCONFIG'}\n";
- push @changedtmf, "TEXMFSYSCONFIG = $vars{'TEXMFSYSCONFIG'}\n";
- }
- } elsif ($line =~ m/^TEXMFHOME/) {
- # kpse now expands ~ to USERPROFILE, so we don't treat win32 and
- # unix differently
- push @newtmf, "TEXMFHOME = $vars{'TEXMFHOME'}\n";
- if ("$vars{'TEXMFHOME'}" ne "~/texmf") {
- push @changedtmf, "TEXMFHOME = $vars{'TEXMFHOME'}\n";
- }
- } elsif ($line =~ m/^OSFONTDIR/) {
- if (win32()) {
- push @newtmf, "OSFONTDIR = \$SystemRoot/fonts//\n";
- push @changedtmf, "OSFONTDIR = \$SystemRoot/fonts//\n";
- } else {
- push @newtmf, $line;
- }
- } else {
- push @newtmf, $line;
- }
- }
- my $TMF;
- if (!$vars{'from_dvd'}) {
- $TMF = ">$vars{'TEXDIR'}/texmf.cnf";
- open(TMF, $TMF) || die "open($TMF) failed: $!";
- print TMF <<EOF;
-% This texmf.cnf file should contain only your personal changes from the
-% main texmf.cnf.
-%
-% Do NOT change values in the main file (which is in
-% .../texlive/YYYY/texmf/web2c/texmf.cnf), as YOUR CHANGES WILL BE LOST
-% by later updates.
-%
-% If you need to make changes to texmf.cnf, put your custom settings in
-% this file instead, which is YYYY/texmf.cnf. And insert *only* your
-% changed values.
-%
-EOF
-;
- foreach (@changedtmf) { print TMF; }
- #
- # save the setting of shell_escape to the generated system texmf.cnf
- # default in texmf/web2c/texmf.cnf is
- # shell_escape = p
- # so we write that only if the user *deselected* this option
- if (!$vars{"option_write18_restricted"}) {
- print TMF <<EOF;
-% Disable system commands via \\write18{...}. Please see
-% texmf/web2c/texmf.cnf
-% for more details.
-shell_escape = 0
-EOF
-;
- }
- } else {
- $TMF = ">$vars{'TEXMFSYSVAR'}/web2c/texmf.cnf";
- open (TMF, $TMF) || die "open($TMF) failed: $!\n";
- foreach (@newtmf) { print TMF; }
- }
- close(TMF) || warn "close($TMF) failed: $!";
-}
-
-
-sub dump_vars {
- my $filename=shift;
- my $fh;
- if (ref($filename)) {
- $fh = $filename;
- } else {
- open VARS, ">$filename";
- $fh = \*VARS;
- }
- foreach my $key (keys %vars) {
- print $fh "$key $vars{$key}\n";
- }
- close VARS if (!ref($filename));
- debug("\n%vars dumped to '$filename'.\n");
-}
-
-
-# Determine which platforms are supported.
-sub set_platforms_supported {
- my @binaries = $tlpdb->available_architectures;
- for my $binary (@binaries) {
- unless (defined $vars{"binary_$binary"}) {
- $vars{"binary_$binary"}=0;
- }
- }
- for my $key (keys %vars) {
- ++$vars{'n_systems_available'} if ($key=~/^binary/);
- }
-}
-
-# Environment variables and default values on UNIX:
-# TEXLIVE_INSTALL_PREFIX /usr/local/texlive => $tex_prefix
-# TEXLIVE_INSTALL_TEXDIR $tex_prefix/2007 => $TEXDIR
-# TEXLIVE_INSTALL_TEXMFSYSVAR $TEXDIR/texmf-var
-# TEXLIVE_INSTALL_TEXMFSYSCONFIG $TEXDIR/texmf-config
-# TEXLIVE_INSTALL_TEXMFLOCAL $tex_prefix/texmf-local
-# TEXLIVE_INSTALL_TEXMFHOME '$HOME/texmf'
-
-sub set_texlive_default_dirs {
- my $tex_prefix;
- my $texmfsysvar;
- my $texmfsysconfig;
- my $texmflocal;
- my $texmfhome;
-
- $tex_prefix=getenv('TEXLIVE_INSTALL_PREFIX');
- if (win32) {
- $tex_prefix ||= getenv('SystemDrive') . '/texlive';
- # we use SystemDrive because ProgramFiles requires admin rights
- # we don't use USERPROFILE here because that will be copied back and
- # forth on roaming profiles
- } else {
- $tex_prefix||='/usr/local/texlive';
- }
- $vars{'TEXDIRW'}="$tex_prefix/$texlive_release";
-
- $texmfsysvar=getenv('TEXLIVE_INSTALL_TEXMFSYSVAR');
- $texmfsysvar||=$vars{'TEXDIRW'} . '/texmf-var';
- $vars{'TEXMFSYSVAR'}=$texmfsysvar;
-
- $texmfsysconfig=getenv('TEXLIVE_INSTALL_TEXMFSYSCONFIG');
- $texmfsysconfig||=$vars{'TEXDIRW'} . '/texmf-config';
- $vars{'TEXMFSYSCONFIG'}=$texmfsysconfig;
-
- $texmflocal=getenv('TEXLIVE_INSTALL_TEXMFLOCAL');
- $texmflocal||="$tex_prefix/texmf-local";
- $vars{'TEXMFLOCAL'}=$texmflocal;
-
- $vars{'TEXDIR'} = $vars{'from_dvd'} ? abs_path($::installerdir) :
- $vars{'TEXDIRW'};
-
- $texmfhome=getenv('TEXLIVE_INSTALL_TEXMFHOME');
- $texmfhome ||= "~";
- $vars{'TEXMFHOME'}="$texmfhome/texmf";
-}
-
-sub calc_depends {
- # we have to reset the install hash EVERY TIME otherwise everything will
- # always be installed since the default is scheme-full which selects
- # all packages and never deselects it
- %install=();
- my $p;
- my $a;
-
- # initialize the %install hash with what should be installed
-
- if ($vars{'selected_scheme'} ne "scheme-custom") {
- # First look for packages in the selected scheme.
- my $scheme=$tlpdb->get_package($vars{'selected_scheme'});
- if (!defined($scheme)) {
- if ($vars{'selected_scheme'}) {
- # something is written in the selected scheme but not defined, that
- # is strange, so warn and die
- die ("Scheme $vars{'selected_scheme'} not defined, vars:\n");
- dump_vars(\*STDOUT);
- }
- } else {
- for my $scheme_content ($scheme->depends) {
- $install{"$scheme_content"}=1 unless ($scheme_content=~/^collection-/);
- }
- }
- }
-
- # Now look for collections in the %vars hash. These are not
- # necessarily the collections required by a scheme. The final
- # decision is made in the collections/languages menu.
- foreach my $key (keys %vars) {
- if ($key=~/^collection-/) {
- $install{$key} = 1 if $vars{$key};
- }
- }
-
- # compute the list of archs to be installed
- my @archs;
- foreach (keys %vars) {
- if (m/^binary_(.*)$/ ) {
- if ($vars{$_}) { push @archs, $1; }
- }
- }
-
- #
- # work through the addon settings in the %vars hash
- #if ($vars{'addon_editor'}) {
- # $install{"texworks"} = 1;
- #}
-
- # if programs for arch=win32 are installed we also have to install
- # tlperl.win32 which provides the "hidden" perl that will be used
- # to run all the perl scripts.
- # Furthermore we install tlgs.win32 and tlpsv.win32, too
- if (grep(/^win32$/,@archs)) {
- $install{"tlperl.win32"} = 1;
- $install{"tlgs.win32"} = 1;
- $install{"tlpsv.win32"} = 1;
- }
-
- # loop over all the packages until it is getting stable
- my $changed = 1;
- while ($changed) {
- # set $changed to 0
- $changed = 0;
-
- # collect the already selected packages
- my @pre_selected = keys %install;
- debug("initial number of installations: $#pre_selected\n");
-
- # loop over all the pre_selected and add them
- foreach $p (@pre_selected) {
- ddebug("pre_selected $p\n");
- my $pkg = $tlpdb->get_package($p);
- if (!defined($pkg)) {
- tlwarn("$p is mentioned somewhere but not available, disabling it.\n");
- $install{$p} = 0;
- next;
- }
- foreach my $p_dep ($tlpdb->get_package($p)->depends) {
- if ($p_dep =~ m/^(.*)\.ARCH$/) {
- my $foo = "$1";
- foreach $a (@archs) {
- $install{"$foo.$a"} = 1 if defined($tlpdb->get_package("$foo.$a"));
- }
- } elsif ($p_dep =~ m/^(.*)\.win32$/) {
- # a win32 package should *only* be installed if we are installing
- # the win32 arch
- if (grep(/^win32$/,@archs)) {
- $install{$p_dep} = 1;
- }
- } else {
- $install{$p_dep} = 1;
- }
- }
- }
-
- # check for newly selected packages
- my @post_selected = keys %install;
- debug("number of post installations: $#post_selected\n");
-
- # set repeat condition
- if ($#pre_selected != $#post_selected) {
- $changed = 1;
- }
- }
-
- # now do the size computation
- my $size = 0;
- foreach $p (keys %install) {
- my $tlpobj = $tlpdb->get_package($p);
- if (not(defined($tlpobj))) {
- tlwarn("$p should be installed but "
- . "is not in texlive.tlpdb; disabling.\n");
- $install{$p} = 0;
- next;
- }
- $size+=$tlpobj->docsize if $vars{'option_doc'};
- $size+=$tlpobj->srcsize if $vars{'option_src'};
- $size+=$tlpobj->runsize;
- foreach $a (@archs) {
- $size += $tlpobj->binsize->{$a} if defined($tlpobj->binsize->{$a});
- }
- }
- $vars{'total_size'} =
- sprintf "%d", ($size * $TeXLive::TLConfig::BlockSize)/1024**2;
-}
-
-sub load_tlpdb {
- my $master = $location;
- info("Loading $master/$TeXLive::TLConfig::InfraLocation/$TeXLive::TLConfig::DatabaseName\n");
- $tlpdb=TeXLive::TLPDB->new(root => "$master");
- if (!defined($tlpdb)) {
- die "$0: Could not load TeX Live Database from $master, goodbye.\n";
- }
- # set the defaults to what is specified in the tlpdb
- $vars{'option_doc'} = $tlpdb->option("install_docfiles");
- $vars{'option_src'} = $tlpdb->option("install_srcfiles");
- $vars{'option_fmt'} = $tlpdb->option("create_formats");
- $vars{'option_letter'} = defined($tlpdb->option("paper"))
- && ($tlpdb->option("paper") eq "letter" ? 1 : 0);
- $vars{'option_desktop_integration'} = $tlpdb->option("desktop_integration");
- $vars{'option_desktop_integration'} = 1 if win32();
- $vars{'option_path'} = $tlpdb->option("path");
- $vars{'option_path'} = 1 if win32();
- $vars{'option_w32_multi_user'} = $tlpdb->option("w32_multi_user");
- # we have to make sure that this option is set to 0 in case
- # that a non-admin is running the installations program
- $vars{'option_w32_multi_user'} = 0 if (win32() && !admin());
- $vars{'option_file_assocs'} = $tlpdb->option("file_assocs");
- $vars{'option_post_code'} = $tlpdb->option("post_code");
- $vars{'option_sys_bin'} = $tlpdb->option("sys_bin");
- $vars{'option_sys_man'} = $tlpdb->option("sys_man");
- $vars{'option_sys_info'} = $tlpdb->option("sys_info");
- $vars{'option_write18_restricted'} = $tlpdb->option("write18_restricted");
-
- # check that the default scheme is actually present, otherwise switch to
- # scheme-minimal
- if (!defined($tlpdb->get_package($default_scheme))) {
- if (!defined($tlpdb->get_package("scheme-minimal"))) {
- die("Aborting, cannot find either $default_scheme or scheme_minimal");
- }
- $default_scheme = "scheme-minimal";
- $vars{'selected_scheme'} = $default_scheme;
- }
-}
-
-sub initialize_collections {
- foreach my $pkg ($tlpdb->list_packages) {
- my $tlpobj = $tlpdb->{'tlps'}{$pkg};
- if ($tlpobj->category eq "Collection") {
- $vars{"$pkg"}=0;
- ++$vars{'n_collections_available'};
- if ($pkg=~/collection-lang/) {
- push @collections_lang, $pkg;
- } elsif ($pkg=~/documentation/) {
- if ($pkg=~/documentation-base/) {
- push @collections_std, $pkg;
- } else {
- push @collections_lang_doc, $pkg;
- }
- } else {
- push @collections_std, $pkg;
- }
- }
- }
- my $scheme_tlpobj = $tlpdb->get_package($default_scheme);
- if (defined ($scheme_tlpobj)) {
- $vars{'n_collections_selected'}=0;
- foreach my $dependent ($scheme_tlpobj->depends) {
- if ($dependent=~/^(collection-.*)/) {
- $vars{"$1"}=1;
- ++$vars{'n_collections_selected'};
- }
- }
- }
- if ($vars{"binary_win32"}) {
- $vars{"collection-wintools"} = 1;
- ++$vars{'n_collections_selected'};
- }
-}
-
-sub set_install_platform {
- my $detected_platform=platform;
- if ($opt_custom_bin) {
- $detected_platform = "custom";
- }
- my $warn_nobin;
- my $warn_nobin_x86_64_linux;
- my $nowarn="";
- my $wp='***'; # warning prefix
-
- $warn_nobin="\n$wp WARNING: No binaries for your platform found. ";
- $warn_nobin_x86_64_linux="$warn_nobin" .
- "$wp No binaries for x86_64-linux found, using i386-linux instead.\n";
-
- my $ret = $warn_nobin;
- if (defined $vars{"binary_$detected_platform"}) {
- $vars{"binary_$detected_platform"}=1;
- $vars{'inst_platform'}=$detected_platform;
- $ret = $nowarn;
- } elsif ($detected_platform eq 'x86_64-linux') {
- $vars{'binary_i386-linux'}=1;
- $vars{'inst_platform'}='i386-linux';
- $ret = $warn_nobin_x86_64_linux;
- } else {
- if ($opt_custom_bin) {
- $ret = "$wp Using custom binaries from $opt_custom_bin.\n";
- } else {
- $ret = $warn_nobin;
- }
- }
- foreach my $key (keys %vars) {
- if ($key=~/^binary.*/) {
- ++$vars{'n_systems_selected'} if $vars{$key}==1;
- }
- }
- return($ret);
-}
-
-sub create_profile {
- my $profilepath = shift;
- # The file "TLprofile" is created at the beginning of the
- # installation process and contains information about the current
- # setup. The purpose is to allow non-interactive installations.
- my $fh;
- if (ref($profilepath)) {
- $fh = $profilepath;
- } else {
- open PROFILE, ">$profilepath";
- $fh = \*PROFILE;
- }
- my $tim = gmtime(time);
- print $fh "# texlive.profile written on $tim UTC\n";
- print $fh "# It will NOT be updated and reflects only the\n";
- print $fh "# installation profile at installation time.\n";
- print $fh "selected_scheme $vars{selected_scheme}\n";
- foreach my $key (sort keys %vars) {
- print $fh "$key $vars{$key}\n"
- if $key=~/^collection/ and $vars{$key}==1;
- print $fh "$key $vars{$key}\n" if $key =~ /^option_/;
- print $fh "$key $vars{$key}\n" if (($key =~ /^binary_/) && $vars{$key});
- print $fh "$key $vars{$key}\n" if $key =~ /^TEXDIR/; # includes TEXDIRW
- print $fh "$key $vars{$key}\n" if $key =~ /^TEXMFSYSVAR/;
- print $fh "$key $vars{$key}\n" if $key =~ /^TEXMFSYSCONFIG/;
- print $fh "$key $vars{$key}\n" if $key =~ /^TEXMFLOCAL/;
- print $fh "$key $vars{$key}\n" if $key =~ /^TEXMFHOME/;
- print $fh "$key $vars{$key}\n" if $key =~ /^from_dvd/;
- }
- if (!ref($profilepath)) {
- close PROFILE;
- }
-}
-
-sub read_profile {
- my $profilepath = shift;
- open PROFILE, "<$profilepath"
- or die "$0: Cannot open profile $profilepath for reading.\n";
- my %pro;
- while (<PROFILE>) {
- chomp;
- next if m/^[[:space:]]*$/; # skip empty lines
- next if m/^[[:space:]]*#/; # skip comment lines
- my ($k,$v) = split (" ", $_, 2); # value might have spaces
- $pro{$k} = $v;
- }
- foreach (keys %vars) {
- # clear out collections from var
- if (m/^collection-/) { $vars{$_} = 0; }
- if (defined($pro{$_})) { $vars{$_} = $pro{$_}; }
- }
- # if a profile contains *only* the selected_scheme setting without
- # any collection, we assume that exactely that scheme should be installed
- my $coldefined = 0;
- foreach my $k (keys %pro) {
- if ($k =~ m/^collection-/) {
- $coldefined = 1;
- last;
- }
- }
- # if at least one collection has been defined return here
- return if $coldefined;
- # since no collections have been defined in the profile, we
- # set those to be installed on which the scheme depends
- my $scheme=$tlpdb->get_package($vars{'selected_scheme'});
- if (!defined($scheme)) {
- dump_vars(\*STDOUT);
- die ("Scheme $vars{selected_scheme} not defined.\n");
- }
- for my $scheme_content ($scheme->depends) {
- $vars{"$scheme_content"}=1 if ($scheme_content=~/^collection-/);
- }
-}
-
-sub prepare_installation {
- make_var_skeleton "$vars{'TEXMFSYSVAR'}";
- make_local_skeleton "$vars{'TEXMFLOCAL'}";
- mkdirhier "$vars{'TEXMFSYSCONFIG'}";
-
- if ($vars{'from_dvd'}) {
- $localtlpdb = $tlpdb;
- } else {
- $localtlpdb=new TeXLive::TLPDB;
- $localtlpdb->root("$vars{'TEXDIR'}");
- }
-}
-
-
-sub do_install_packages {
- my @what;
- foreach my $package (sort keys %install) {
- push @what, $package if ($install{$package} == 1);
- }
- if (!install_packages($tlpdb,$media,$localtlpdb,\@what,
- $vars{'option_src'},$vars{'option_doc'})) {
- my $profile_name = "installation.profile";
- create_profile($profile_name);
- tlwarn("Installation failed.\n");
- tlwarn("Rerunning the installer will try to restart the installation.\n");
- tlwarn("Or you can restart by running the installer with:\n");
- if (win32()) {
- tlwarn(" install-tl.bat --profile $profile_name [EXTRA-ARGS]\n");
- } else {
- tlwarn(" install-tl --profile $profile_name [EXTRA-ARGS]\n");
- }
- flushlog();
- exit(1);
- }
-}
-
-# for later complete removal we want to save some options and values
-# into the local tlpdb:
-# - should links be set, and if yes, the destination (bin,man,info)
-sub save_options_into_tlpdb {
- $localtlpdb->option ("location", $location);
- $localtlpdb->option ("create_formats", $vars{'option_fmt'} ? "1" : "0");
- $localtlpdb->option ("desktop_integration", $vars{'option_desktop_integration'} ? "1" : "0");
- $localtlpdb->option ("file_assocs", $vars{'option_file_assocs'});
- $localtlpdb->option ("post_code", $vars{'option_post_code'} ? "1" : "0");
- $localtlpdb->option ("sys_bin", $vars{'option_sys_bin'});
- $localtlpdb->option ("sys_info", $vars{'option_sys_info'});
- $localtlpdb->option ("sys_man", $vars{'option_sys_man'});
- $localtlpdb->option ("install_docfiles", $vars{'option_doc'} ? "1" : "0");
- $localtlpdb->option ("install_srcfiles", $vars{'option_src'} ? "1" : "0");
- $localtlpdb->option ("w32_multi_user", $vars{'option_w32_multi_user'} ? "1" : "0");
- my @archs;
- foreach (keys %vars) {
- if (m/^binary_(.*)$/ ) {
- if ($vars{$_}) { push @archs, $1; }
- }
- }
- if ($opt_custom_bin) {
- push @archs, "custom";
- }
-
- # only if we forced the platform we do save this option into the tlpdb
- if (defined($opt_force_arch)) {
- $localtlpdb->setting ("platform", $::_platform_);
- }
- $localtlpdb->setting("available_architectures", @archs);
- $localtlpdb->save() unless $vars{'from_dvd'};
-}
-
-
-sub import_settings_from_old_tlpdb {
- my $dn = shift;
- my $tlpdboldpath = "$dn/$TeXLive::TLConfig::InfraLocation/$TeXLive::TLConfig::DatabaseName";
- my $previoustlpdb;
- if (-r $tlpdboldpath) {
- # we found an old installation, so read that one in and save
- # the list installed collections into an array.
- info ("Trying to load old TeX Live Database,\n");
- info ("ignore warnings on unknown category Documentation\n");
- $previoustlpdb = TeXLive::TLPDB->new(root => $dn);
- if ($previoustlpdb) {
- info ("Importing settings from old installation in $dn\n");
- } else {
- tlwarn ("Cannot load old TLPDB, continuing with normal installation.\n");
- return;
- }
- } else {
- return;
- }
- # first import the collections
- # since the scheme is not the final word we select scheme-custom here
- # and then set the single collections by hand
- $vars{'selected_scheme'} = "scheme-custom";
- $vars{'n_collections_selected'} = 0;
- # remove the selection of all collections
- foreach my $entry (keys %vars) {
- if ($entry=~/^(collection-.*)/) {
- $vars{"$1"}=0;
- }
- }
- for my $c ($previoustlpdb->collections) {
- my $tlpobj = $tlpdb->get_package($c);
- if ($tlpobj) {
- $vars{$c} = 1;
- ++$vars{'n_collections_selected'};
- }
- }
- # now take over the path
- my $oldroot = $previoustlpdb->root;
- my $newroot = abs_path("$oldroot/..") . "/$texlive_release";
- $vars{'TEXDIR'} = $newroot;
- $vars{'TEXDIRW'} = $newroot;
- $vars{'TEXMFSYSVAR'} = "$newroot/texmf-var";
- $vars{'TEXMFSYSCONFIG'} = "$newroot/texmf-config";
- # only TEXMFLOCAL is treated differently, we use what is found by kpsewhich
- # in 2008 and onward this is defined as
- # TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local
- # so kpsewhich -var-value=TEXMFLOCAL returns
- # ..../2008/../texmf-local
- # TODO TODO TODO
- chomp (my $tml = `kpsewhich -var-value=TEXMFLOCAL`);
- $tml = abs_path($tml);
- $vars{'TEXMFLOCAL'} = $tml;
- #
- # now for the settings
- # set the defaults to what is specified in the tlpdb
- $vars{'option_doc'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "install_docfiles");
- $vars{'option_src'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "install_srcfiles");
- $vars{'option_fmt'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "create_formats");
- $vars{'option_desktop_integration'} = 1 if win32();
- # option_path does not exist in older installation
- $vars{'option_path'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "create_symlinks");
- $vars{'option_path'} = 1 if win32();
- $vars{'option_sys_bin'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "sys_bin");
- $vars{'option_sys_man'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "sys_man");
- $vars{'sys_info'} =
- $previoustlpdb->option_pkg("00texlive-installation.config",
- "sys_info");
- #
- # import the set of selected architectures
- my @aar = $previoustlpdb->setting_pkg("00texlive-installation.config",
- "available_architectures");
- if (@aar) {
- for my $b ($tlpdb->available_architectures) {
- $vars{"binary_$b"} = member( $b, @aar );
- }
- $vars{'n_systems_available'} = 0;
- for my $key (keys %vars) {
- ++$vars{'n_systems_available'} if ($key=~/^binary/);
- }
- }
-}
-
-# do everything to select a scheme
-#
-sub select_scheme {
- my $s = shift;
- # set the selected scheme to $s
- $vars{'selected_scheme'} = $s;
- # if we are working on scheme-custom simply return
- return if ($s eq "scheme-custom");
- # remove the selection of all collections
- foreach my $entry (keys %vars) {
- if ($entry=~/^(collection-.*)/) {
- $vars{"$1"}=0;
- }
- }
- # select the collections belonging to the scheme
- my $scheme_tlpobj = $tlpdb->get_package($s);
- if (defined ($scheme_tlpobj)) {
- $vars{'n_collections_selected'}=0;
- foreach my $dependent ($scheme_tlpobj->depends) {
- if ($dependent=~/^(collection-.*)/) {
- $vars{"$1"}=1;
- ++$vars{'n_collections_selected'};
- }
- }
- }
- # we have first set all collection-* keys to zero and than
- # set to 1 only those which are required by the scheme
- # since now scheme asks for collection-wintools we set its vars value
- # to 1 in case we are installing win32 binaries
- if ($vars{"binary_win32"}) {
- $vars{"collection-wintools"} = 1;
- ++$vars{'n_collections_selected'};
- }
- # for good measure, update the deps
- calc_depends();
-}
-
-sub update_numbers {
- $vars{'n_collections_available'}=0;
- $vars{'n_collections_selected'} = 0;
- $vars{'n_systems_available'} = 0;
- $vars{'n_systems_selected'} = 0;
- foreach my $key (keys %vars) {
- if ($key =~ /^binary/) {
- ++$vars{'n_systems_available'};
- ++$vars{'n_systems_selected'} if $vars{$key} == 1;
- }
- if ($key =~ /^collection-/) {
- ++$vars{'n_collections_available'};
- ++$vars{'n_collections_selected'} if $vars{$key} == 1;
- }
- }
-}
-
-sub flushlog {
- my $fh;
- if (open(LOG,">install-tl.log")) {
- printf "Writing log file to current working directory.\n";
- $fh = \*LOG;
- } else {
- $fh = \*STDERR;
- printf "Not creating a log file but flushing messages to stderr.\n";
- }
-
- foreach my $l (@::LOGLINES) {
- print $fh $l;
- }
-}
-
-sub check_on_lang_collection_installed {
- # we check that at least one lang collection is installed:
- foreach my $c (@collections_lang) {
- return 1 if $vars{"$c"};
- }
- if ($vars{"selected_scheme"} eq "scheme-context") {
- # context
- return 1;
- }
- return 0;
-}
-
-sub do_cleanup
-{
- # now open the log file and write out the log lines
- # try to open a log file
- # the user could have given the -logfile option in which case all the
- # stuff is already dumped to it and $::LOGFILE defined. So do not
- # redefine it
- if (!defined($::LOGFILE)) {
- if (open(LOGF,">$vars{'TEXDIRW'}/install-tl.log")) {
- $::LOGFILE = \*LOGF;
- foreach my $line(@::LOGLINES) {
- print $::LOGFILE "$line";
- }
- } else {
- tlwarn("$0: Cannot create log file $vars{'TEXDIRW'}/install-tl.log: $!\n"
- . "Not writing out log lines.\n");
- }
- }
-
- # remove temporary files from TEXDIR/temp
- if (($media eq "CD") or ($media eq "NET")) {
- debug("Remove temporary downloaded containers...\n");
- rmtree("$vars{'TEXDIRW'}/temp") if (-d "$vars{'TEXDIRW'}/temp");
- }
-
- # dump various things to the log file
- #if (defined($::LOGFILE)) {
- # print $::LOGFILE "\nDump of vars:\n";
- # foreach my $key (keys %vars) {
- # print $::LOGFILE "$key $vars{$key}\n";
- # }
- # create_profile($::LOGFILE);
- #}
-
- # should not be needed any more
- #dump_vars("$system_tmpdir/texlive.vars");
-
- # write the profile out
- if ($vars{'from_dvd'}) {
- create_profile("$vars{'TEXDIRW'}/texlive.profile");
- debug("Profile written to $vars{'TEXDIRW'}/texlive.profile\n");
- } else {
- create_profile("$vars{'TEXDIR'}/$InfraLocation/texlive.profile");
- debug("Profile written to $vars{'TEXDIR'}/$InfraLocation/texlive.profile\n");
- }
- # Close log file if present
- close($::LOGFILE) if (defined($::LOGFILE));
- if (defined($::LOGFILENAME) and (-e $::LOGFILENAME)) {
- print "Logfile: $::LOGFILENAME\n";
- } elsif (-e "$vars{'TEXDIRW'}/install-tl.log") {
- print "Logfile: $vars{'TEXDIRW'}/install-tl.log\n";
- } else {
- print "No logfile\n";
- }
-}
-
-
-# portable option, invoked from tl-portable script.
-#
-sub do_portable {
- $::opt_verbosity = -1;
- $::_platform_ = platform();
- $location = getenv('TEXDIR');
- die "$0: Don't use --portable directly; use tl-portable instead\n"
- unless $location;
- $vars{'TEXDIR'} = $location;
- if (not -d $vars{'TEXDIR'}.'/bin/'.$::_platform_) { # shouldn't happen
- die "$0: Platform ".$::_platform_." not supported.";
- }
- # set_platforms_supported();
- # set_texlive_default_dirs();
- $vars{'TEXDIRW'} = getenv('TEXDIRW');
- $vars{'TEXMFSYSVAR'} = getenv('TEXMFSYSVAR');
- $vars{'TEXMFSYSCONFIG'} = getenv('TEXMFSYSCONFIG');
- $vars{'TEXMFLOCAL'} = getenv('TEXMFLOCAL');
- $vars{'TEXMFHOME'} = getenv('TEXMFHOME');
- $vars{'TEXMFVAR'} = getenv('TEXMFVAR');
- $vars{'TEXMFCONFIG'} = getenv('TEXMFCONFIG');
- if (win32()) {
- non_admin();
- my $winpath = "$vars{'TEXDIR'}/bin/win32";
- }
-
- our $PORTABLE_PROMPT_DONE = 0; # used in subroutine below
- if (! -d "$vars{'TEXMFCONFIG'}" ) {
- portable_prompt ();
- mkdirhier "$vars{'TEXMFCONFIG'}";
- }
- if (! -d "$vars{'TEXMFSYSCONFIG'}" ) {
- portable_prompt ();
- mkdirhier "$vars{'TEXMFSYSCONFIG'}";
- }
- if (! -d "$vars{'TEXMFSYSVAR'}" ) {
- portable_prompt ();
- load_tlpdb();
- $localtlpdb = $tlpdb;
- $texlive_release = $tlpdb->config_release;
- make_var_skeleton "$vars{'TEXMFSYSVAR'}";
- # the usual option for pregenerating all formats doesn't apply
- $vars{'option_fmt'} = 0;
- do_postinst_stuff();
- }
-
- close($::LOGFILE) if defined($::LOGFILE);
- print TeXLive::TLUtils::welcome;
- exit 0;
-
-
- # Give the user a chance to bail before changing anything.
- # (Nested subroutine.)
- sub portable_prompt
- {
- return if $PORTABLE_PROMPT_DONE;
- $PORTABLE_PROMPT_DONE = 1;
- print "About to generate some files, press Enter to continue:";
- <STDIN>;
- }
-}
-
-#
-# some helper fucntion
-sub select_collections {
- my $varref = shift;
- foreach (@_) {
- $varref->{$_} = 1;
- }
-}
-
-sub deselect_collections {
- my $varref = shift;
- foreach (@_) {
- $varref->{$_} = 0;
- }
-}
-
-
-__END__
-
-=head1 NAME
-
-install-tl - TeX Live cross-platform installer
-
-=head1 SYNOPSIS
-
-install-tl [OPTION]...
-
-install-tl.bat [OPTION]...
-
-=head1 DESCRIPTION
-
-The TeX Live installer works across all supported platforms and allows
-to install TeX Live from various media, including the network. For
-information on initially downloading TeX Live, see
-L<http://tug.org/texlive/acquire.html>.
-
-The basic idea of TeX Live installation is to choose one of the
-top-level I<schemes>, each of which is defined as a different set of
-I<collections> and I<packages>, where a collection is a set of packages,
-and a package is what contains actual files.
-
-Within the installer, you can choose a scheme, and further customize the
-set of collections to install, but not the set of the packages. To do
-that, remove the undesired packages after installation with C<tlmgr>
-(see reference below).
-
-The default is C<scheme-full>, to install everything, and this is highly
-recommended unless your disk space is severely limited.
-
-=head1 REFERENCES
-
-Post-installation configuration, packages updates, and more, are handled
-through B<tlmgr>(1), the TeX Live Manager
-(L<http://tug.org/texlive/tlmgr.html>).
-
-The most up-to-date version of this documentation is on the Internet at
-L<http://tug.org/texlive/doc/install-tl.html>.
-
-For the full documentation of TeX Live, see
-L<http://tug.org/texlive/doc>.
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-gui> [[=]I<module>]
-
-If no I<module> is given starts the C<perltk> (see below) GUI installer.
-
-If I<module> is given loads the given installer module. Currently the
-following modules are supported:
-
-=over 8
-
-=item C<text>
-
-The text mode user interface which is the default on Unix systems, and
-can be forced with by giving C<text> as I<module>, or with the C<-no-gui>
-switch.
-
-=item C<wizard>
-
-The wizard mode user interface asking only a few questions before installing
-all of TeX Live. This is the default on Windows systems.
-
-=item C<perltk>
-
-The all-in-one GUI installer.
-It can also be selected by giving the C<-gui> option without any I<module>.
-
-=back
-
-The C<perltk> and C<wizard> modules, and thus also when calling with a
-simple C<-gui> (without I<module>) requires
-the Perl/Tk module (L<http://tug.org/texlive/distro.html#perltk>); if
-Perl/Tk is not available, installation continues in text mode.
-
-
-=item B<-no-gui>
-
-Use the text mode installer (default except on Windows).
-
-=item B<-lang> I<2-letter lang code>
-
-(only for GUI installer) If possible, start the installer translated into
-the language specified by the 2-letter (ISO 639-1) language code (with
-the exception for selecting simplified or traditional Chinese).
-Currently supported
-languages: English (en, default), Czech (cs), German (de), French (fr),
-Italian (it), Dutch (nl), Polish (pl), Russian (ru), Slovak (sk),
-Slovenian (sl), Vietnamese (vi), simplified Chinese (zh-cn), and
-traditional Chinese (zh-tw).
-
-=item B<-repository> I<url|path>
-
-Specify the package repository to be used as the source of the
-installation, either a local directory via C</path/to/directory> or a
-C<file:/> url, or a network location via a C<http://> or C<ftp://> url.
-(No other protocols are supported.)
-
-If the repository is local, the installation type (compressed or live) is
-automatically determined, by checking for the presence of a
-C<archive> directory relative to the root. Compressed is
-preferred if both are available, since it is faster. Here's an example
-of using a local directory:
-
- -repository /local/TL/repository
-
-If the repository is on the network, trailing C</> characters and/or
-trailing C</tlpkg> and C</archive> components are ignored. For example,
-you could choose a particular CTAN mirror with something like this:
-
- -repository http://ctan.example.org/its/ctan/dir/systems/texlive/tlnet
-
-Of course a real hostname and its particular top-level CTAN path
-have to be specified. The list of CTAN mirrors is available at
-L<http://ctan.org/mirrors>.
-
-The default is to pick a mirror automatically, using
-L<http://mirror.ctan.org/systems/texlive/tlnet>; the chosen mirror is
-used for the entire download. You can use the special repository name
-C<ctan> as an abbreviation for this. See L<http://ctan.org> for more
-about CTAN and its mirrors.
-
-After installation is complete, you can use that installation as the
-repository for another installation. If you chose to install less than
-the full scheme containing all packages, the list of available schemes
-will be adjusted accordingly.
-
-For backward compatibility and convenience, C<--location> and C<--repo>
-are accepted as aliases for this option.
-
-=item B<-no-cls>
-
-(only for text mode installer) do not clear the screen when entering
-a new menu (for debugging purposes).
-
-=item B<-non-admin>
-
-For Windows only: configure for the current user, not for all users.
-
-=item B<-all-options>
-
-Normally options not regarding the current architecture are not shown.
-Giving this cmd line option allows to configure settings in the
-final tlpdb that do not have any immediate effect.
-
-=item B<-portable>
-
-Start the installer for portable use---but use the C<tl-portable>
-scripts instead of this option. See below for details.
-
-=item B<-print-arch>
-
-Print the detected arch-os combination and exit.
-
-=item B<-force-arch> I<arch-os>
-
-Instead of auto-detecting the current platform use the one given on the
-cmd line. Make sure that there are binaries for this platform and they
-can actually be run.
-
-=item B<-profile> I<profile>
-
-Load the I<profile> file for repeated installations on different systems.
-A I<profile> contains the values of all necessary variable for the
-installation. After normal installation has finished a profile for that
-exact installation is written into DEST/tlpkg/texlive.profile. That file
-can be used to do the exact same installation on a different computer.
-
-You can also hand-craft such a profile starting from a generated one
-by changing some values. Normally a profile has to contain the value 1 for
-each collection that should be installed, even if the scheme is specified.
-That follows from the logic of the installer that you first select a scheme
-and then can change the actual collections being installed.
-
-There is one exception to this: If the profile contains a variable for
-B<selected_scheme> and I<no> collection variable is defined in the
-profile, then the collections which the specified scheme requires are
-installed. Thus, a simple line C<selected_scheme scheme-medium>
-together with the definitions of the paths (C<TEXDIR>, C<TEXDIRW>,
-C<TEXMFHOME>, C<TEXMFLOCAL>, C<TEXMFSYSCONFIG>, C<TEXMFSYSVAR>) suffices
-to install the medium scheme with all default options.
-
-=item B<-scheme> I<scheme>
-
-Schemes are the highest level of package grouping in TeX Live; the
-default is to use the C<full> scheme, which includes everything. This
-option overrides that default. You can change the scheme again before
-the actual installation with the usual menu. The I<scheme> argument may
-optionally have a prefix C<scheme->. The list of supported scheme names
-depends on what your package repository provides; see the interactive
-menu list.
-
-=item B<-custom-bin> I<path>
-
-In case your architecture is not supported by TeX Live out of the box
-and you have built your own binaries for your system, this option allows
-to give the I<path> to a directory where ready made binaries for your
-system are present. The installation will continue as normally, but at
-the end all files from I<path> are copied over to C<bin/custom> in your
-installation folder and this directory will be added to the path for
-the postinstall actions.
-
-=item B<-debug-translation>
-
-This switch will make install-tl report any missing or probably
-untranslated messages in the GUI installers to STDERR.
-
-=item B<-q>
-
-Omit normal informational messages.
-
-=item B<-v>
-
-Include debugging messages; repeat for maximum debugging, as in C<-v
--v>. (Further repeats are accepted but ignored.)
-
-=item B<-logfile> I<file>
-
-Write both all messages (informational, debugging, warnings) to I<file>,
-in addition to standard output or standard error.
-
-If this option is not given, the installer will create a log file
-in the root of the writable installation tree,
-for example, C</usr/local/texlive/YYYY/install-tl.log> for the I<YYYY>
-release.
-
-=item B<--help>, B<-help>, B<-?>
-
-Display this help and exit.
-
-=item B<--version>, B<-version>
-
-Output version information and exit.
-If C<-v> has been given the revisions of the used modules are reported, too.
-
-=back
-
-As usual, all options can be specified with either C<-> or C<-->, and
-arguments can be separated from their options by either a space or C<=>.
-
-=head1 PORTABLE USE
-
-The TeX Live root directory contains a shell script C<tl-portable.sh>
-and a DOS batch file C<tl-portable.bat> which start up a new shell and
-command prompt in which TeX Live can be run with minimal impact on the
-host system. These files start up C<install-tl> with the
-C<-portable> option for some minimal preparation. Don't use this option
-directly; it makes very specific assumptions about its environment.
-
-=head1 AUTHORS AND COPYRIGHT
-
-This script and its documentation were written for the TeX Live
-distribution (L<http://tug.org/texlive>) and both are licensed under the
-GNU General Public License Version 2 or later.
-
-=cut
-
-### Local Variables:
-### perl-indent-level: 2
-### tab-width: 2
-### indent-tabs-mode: nil
-### End:
-# vim:set tabstop=2 expandtab: #