summaryrefslogtreecommitdiff
path: root/Master
diff options
context:
space:
mode:
Diffstat (limited to 'Master')
-rw-r--r--Master/texmf-dist/tex/latex/export/dvipaste.sty339
-rw-r--r--Master/texmf-dist/tex/latex/export/export.sty164
2 files changed, 503 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/latex/export/dvipaste.sty b/Master/texmf-dist/tex/latex/export/dvipaste.sty
new file mode 100644
index 00000000000..22bbdf1710d
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/export/dvipaste.sty
@@ -0,0 +1,339 @@
+% Copyright (C) The TeXplorators Corporation 1989
+
+% This is DVIPASTE.TEX, to be used with DVIPASTE.EXE, which is
+% Copyright (C) The TeXplorators Corporation 1989.
+
+% First we want to have a control sequence that stands for the current
+% category code of @, so that we can restore this category code at the end,
+% after temporarily making @ a letter (PLAIN makes @ category 12, but
+% AmS-TeX, for example, makes @ category 13). Using \csname CCC@\endcsname,
+% we can even let this control sequence be called \CCC@, before actually
+% making @ a letter, except that this won't work when @ has category
+% code 13, so instead we have to use the \uccode and \uppercase trick.
+
+% MODS by Jean-Pierre Drucbert (JPFD)
+% - use \@@line in place of \line (LaTeX compatibility)
+% - place the File number in the right margin (with \rlap)
+% - make the microscopic rules really invisible (width 0sp)
+%
+
+{\uccode`\Z=`\@
+ \uppercase{\expandafter\xdef\csname CCCZ\endcsname{\the\catcode`\@}}
+}
+
+% Now we make @ a letter.
+
+\catcode`\@=11
+
+
+% \eat@ gobbles a token; it is the same as in AmS-TeX.
+
+\def\eat@#1{}
+
+
+% We need to know if a \sendout or \paste has already occurred. The
+% following are made true once the respective condition has occurred.
+
+\newif\ifsendout@
+\newif\ifpaste@
+
+
+% We need to allocate places for writing or reading the .dat file.
+
+\newwrite\writedata@
+\newread\readdata@
+
+
+% The definition of \sendout has the following features (%1, %2, etc.
+% refer to lines so marked within the definition of \sendout):
+
+%1 If \paste has occurred, we won't allow a \sendout to occur, because
+% these shouldn't both occur in the same file; in fact, files having
+% \sendout's will redefine the \output routine.
+
+% In the \errmessage, we can't say \string\sendout, because \sendout is
+% outer. So we use \expandafter\eat@\string\\ to get the \, and then
+% spell out sendout.
+
+%2 If a \paste hasn't occurred, we see if a previous \sendout has occurred,
+% and if it hasn't, we do the following:
+
+%3 Open the .dat file for writing.
+
+%4 Declare \t@nrm to use for the name of the file and the page number
+% in the footline (it is possible that no font with the necessary
+% characters in it has been used in the file); the declaration is made
+% \global, just in case \sendout was used in a group, though it really
+% shouldn't be.
+
+%5 Set \topskip to 0pt.
+
+%6 Change the \output routine, to simply \shipout the current page,
+% followed by a line 2pc below with the name of the file, and the
+% page number.
+
+%7 We also want to redefine \bye, to close out the .dat file. We can't
+% put \gdef\bye within the definition of \sendout, since \bye is outer,
+% but we can say \expandafter\gdef\csname bye\endcsname !
+
+%8 And we make \ifsendout@ true.
+
+%9 In any case (i.e., whether or not a previous \sendout has occurred),
+% we now put #1 in \box0, so that we can refer to its height, depth and
+% width (usually #1 will be a \box, but we don't know which one).
+
+%10 Then we write this data to the .dat file; each \space will expand to a
+% space (PLAIN has \def\space{ }).
+
+%11 We start the page with an invisible \hrule (so that the next \vskip
+% won't disappear).
+
+%12 We move down to the bottom of the page.
+
+%13 We emit a special, which tells where the .dvi instructions for
+% printing \box0 begin.
+
+%14 We set the dimensions of \box0 to 0pt.
+
+%15 We start an unindented paragraph with \box0.
+
+%16 Then we emit another special, which tells where the .dvi instructions
+% for printing \box0 end.
+
+%17 Finally, we put in a smashed (and tiny) \vrule. Since this \vrule
+% has to occur exactly at the same position where the \noindent began,
+% the .dvi instructions for printing \box0 will bring us right back to
+% the position we started at.
+
+%18 Then we \eject, so that the \output routine will simply print \box0 on
+% a separate page.
+
+\outer\def\sendout#1{%
+ \ifpaste@ %1
+ \errmessage{\expandafter\eat@\string\\sendout and
+ \string\paste\space not allowed in same file
+ (\string\paste\space has already appeared)}%
+ \else %2
+ \ifsendout@
+ \else
+ \immediate\openout\writedata@=\jobname.dat %3
+ \global\font\t@nrm=cmr10 %4
+ \global\topskip\z@ %5
+ \global\output{\shipout\vbox{\vbox to\vsize{\unvbox255 }% %6
+ \baselineskip2pc
+% \@@line{\hfil\t@nrm File [\jobname], \#\number\count0\hfil}}%
+ \@@line{\hfil\rlap{\t@nrm File [\jobname], \#\number\count0}\qquad\null}}% %JPFD
+ \global\advance\count0\@ne}%
+ \expandafter\gdef\csname bye\endcsname %7
+ {\immediate\closeout\writedata@\par\vfill\supereject\end}%
+ \global\sendout@true %8
+ \fi
+ \setbox\z@\hbox{#1}% %9
+ \immediate\write\writedata@
+% {\the\ht\z@\space\the\dp\z@\space\the\wd\z@}% %10
+ {\number\csname ht\endcsname\z@ sp\space\number\csname dp\endcsname\z@ sp\space\number\csname wd\endcsname\z@ sp}% %10
+ \hrule height\z@ %11
+ \vskip\vsize %12
+ \special{beginpaste:}% %13
+ \ht\z@=\z@\dp\z@=\z@\wd\z@=\z@ %14
+ \noindent\box\z@ %15
+ \special{endpaste:}% %16
+ \smash{\vrule height1sp width0sp depth\z@}% %17 % 0sp JPFD
+ \eject %18
+ \fi}
+
+
+% The scratch tokens \toks@@ are already used in AmS-TeX.
+
+\toksdef\toks@@=2
+
+
+% \rightappend@ is from The TeXbook, page 378.
+
+\long\def\rightappend@#1\to#2{\toks@{\\{#1}}%
+ \toks@@=\expandafter{#2}\xdef#2{\the\toks@@\the\toks@}}
+
+
+% \ifreading@ will be true while still reading the data file; it is simply
+% the opposite of \ifeof, but we need an \if... with these reversed values,
+% to use within a \loop.
+
+\newif\ifreading@
+
+
+% The last line of the data file will produce a \par, so we need to have
+% something to test against \par.
+
+\def\Par@{\par}
+
+
+% The definition of \paste has the following features:
+
+%1 If \sendout has occurred, we won't allow a \paste to occur.
+
+%2 If a \paste hasn't occurred, we do the following:
+
+%3 We make \ifpaste@ true.
+
+%4 When we read in a data file `file'.dat, we will record all the data
+% in a control sequence \`file'@dat. This will be a list macro, as in
+% The TeXbook, page 378.
+
+% To see whether we have read in the data file yet, we just see whether
+% this control sequence, as specified by \csname, is \relax.
+
+%5 If not, we haven't read the file yet, so we immediately open it for
+% reading.
+
+%6 We use \ifeof to test whether the file really exists.
+
+%7 Assuming the file does exist, we do the following.
+
+%8 We are going to temporarily store the data in the control sequence
+% \next@, and at the end \let\`file'@dat=\next@. We do this because it
+% is rather awkward to continually refer to the control sequence
+% \`file'@dat, which can only be named using \csname. We begin by
+% setting \next@ to be empty.
+
+%9 We set \ifreading@ to be true (it will be false when we get to the
+% end of the data file).
+
+%10 We read using a \loop.
+
+%11 The \loop needs a test that is true if we are going to keep reading,
+% so we set \ifreading@ false when \ifeof gives true.
+
+%12 If we are still reading the file, we read a line to \next@ii.
+
+%13 The file has a \par at the end, so \ifx\next@ii\Par@ is true when we
+% are at the last line.
+
+%14 If that is not the case, then we want to add the data in \next@ii to
+% \next@. We need \expandafter\rightappend@; otherwise we would just
+% get \next@ii in the token list, rather than the values it now has.
+
+%15 And we just keep doing that until the file is all read.
+
+%16 Then we close the file.
+
+%17 And then we want to \global\let\`file'@dat=\next@. We need to expand
+% the \csname...\endcsname after a \global\let, which requires the
+% triple \expandafter trick of The TeXbook, page 374.
+
+%18 In any case (i.e., whether or not we first had to read in the data
+% file), we now want to apply the \getdata@ construction, defined
+% below, to \`file'@dat and the second argument #2 of \paste. This
+% also requires an \expandafter.
+
+%19 \ifgetdata@ will be true if #2 is actually the number of a line in
+% the data file.
+
+%20 In this case, the three pieces of data will be stored in \data@ht,
+% \data@dp, and \data@wd, and we will want to put in a box of that
+% height, depth and width. The easiest way is to lower a box of that
+% height+depth by the depth, so we first set \dimen@ to that sum.
+
+%21 We make an \hbox containing the special, and then the empty box with
+% the desired dimensions. NOTE: It is important to put the \special
+% in the \hbox, in case this empty box turns out to be the first
+% thing on the page. For some reason, \tex\ doesn't position such
+% an empty box at the right place, although it does position anything
+% that will actually appear on the page in the right place; a box
+% with a \special in it is NOT treated as an empty box in this process.
+
+%22 If #2 is not the number of a line in the data file, we just give an
+% error message ``No data for File [<data file>], #[<value of #2>]''
+% In order to have # appear in the error message, rather than ##, we
+% temporarily make # the \lccode of Z, put Z where we want the # to
+% appear, and then \lowercase the \errmessage. However, we want to
+% have uppercase N and F in this message, so we have to also set
+% the \lccode of N to N, and of F to F.
+
+
+\def\paste#1#2{%
+ \ifsendout@ %1
+ \errmessage{\string\paste\space and
+ \expandafter\eat@\string\\sendout not allowed in same file
+ (\expandafter\eat@\string\\sendout has already appeared)}%
+ \else %2
+ \global\paste@true %3
+ \expandafter\ifx\csname #1@dat\endcsname\relax %4
+ \immediate\openin\readdata@=#1.dat %5
+ \ifeof\readdata@\errmessage{No file #1.dat}% %6
+ \else %7
+ \def\next@{}% %8
+ \reading@true %9
+ \loop %10
+ \ifeof\readdata@\reading@false\fi %11
+ \ifreading@ %12
+ \read\readdata@ to\next@ii
+ \ifx\next@ii\Par@\else %13
+ \expandafter\rightappend@\next@ii\to\next@\fi %14
+ \repeat %15
+ \immediate\closein\readdata@ %16
+ \expandafter\expandafter\expandafter\global\expandafter
+ \let\csname#1@dat\endcsname\next@ %17
+ \fi
+ \fi
+ \expandafter\getdata@\csname#1@dat\endcsname{#2}% %18
+ \ifgetdata@ %19
+ \dimen@=\data@ht\advance\dimen@\data@dp %20
+ \hbox{\special{dvipaste: #1 #2}% %21
+ \lower\data@dp\vbox to\dimen@{\hbox to\data@wd{\hfil}\vfil}}%
+ \else %22
+ {\lccode`\Z=`\#\lccode`\N=`\N\lccode`\F=`\F%
+ \lowercase{\errmessage{No data for File [#1], Z#2}}}%
+ \fi
+ \fi}
+
+
+% \data@ht, \data@dp, and \data@wd are registers in which \getdata@ will
+% store the data gotten.
+
+\newdimen\data@ht
+\newdimen\data@dp
+\newdimen\data@wd
+
+
+% We also use a flag \ifgetdata@ to tell whether there was data on the line
+% requested.
+
+\newif\ifgetdata@
+
+
+% Argument #1 for \getdata@ is a list macro, and #2 a number.
+
+%1 We start by setting the counter \count@ to 0, and \ifgetdata@ to
+% false.
+
+%2 We temporarily (i.e., within a group), define \\ to: (a) advance
+% \count@ by 1 (so that \count@ is k when we are looking at the kth
+% thing on the list); (b) if \count@=#2 (we are at the element of the
+% lists specified by #2), set \ifgetdata@ true (so it is true only if
+% there are at least #2 pieces of data); (c) and then use \getdata@@ to
+% get the data out of this piece.
+
+%3 And then we apply this \\ to the list.
+
+
+\def\getdata@#1#2{\count@\z@\getdata@false %1
+ {\def\\##1{\advance\count@\@ne\ifnum\count@=#2\relax\global\getdata@true
+ \getdata@@##1\getdata@@\fi %2
+ }#1}} %3
+
+
+% The elements of the list macro will be of the form
+
+% [...]pt [...]pt [...]pt
+
+% with a space after the first and second pt, so we just have \getdata@
+% delimit its first two arguments with spaces.
+
+
+\def\getdata@@#1 #2 #3\getdata@@{%
+ \global\data@ht=#1\relax\global\data@dp=#2\relax\global\data@wd=#3\relax}
+
+
+% Finally, we return @ to its old \catcode.
+
+\catcode`\@\CCC@
diff --git a/Master/texmf-dist/tex/latex/export/export.sty b/Master/texmf-dist/tex/latex/export/export.sty
new file mode 100644
index 00000000000..f2c16ab0192
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/export/export.sty
@@ -0,0 +1,164 @@
+%%
+%% This is file `export.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% export.dtx (with options: `package')
+%%
+%% IMPORTANT NOTICE:
+%% This file is a stripped version of `export.dtx',
+%% copyright (c) 1996, 1997, 1998, 1999, 2000, 2001 by Jean-Pierre Drucbert (drucbert@onecert.fr)
+%%
+%%
+%% You are not allowed to distribute this file.
+%% For distribution of the original source see
+%% the copyright notice in the source file.
+%%
+%% Package `export' to use with LaTeX 2e
+%% Copyright (C) 1996, 1997, 1998, 1999 Jean-Pierre F. Drucbert, all rights reserved
+%%
+%% You may use and distribute this file freely, provided that
+%% you don't pretend that you wrote it.
+\NeedsTeXFormat{LaTeX2e}[1996/06/01]
+\ProvidesPackage{export}
+ [2000/10/16 v1.8 Exportation of LaTeX registers (JPFD)]
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\newwrite\export
+\newcommand{\openexport}[2][xpt]{%
+\PackageInfo{export}{\MessageBreak
+Exportations into #2.#1.\MessageBreak}%
+\immediate\openout\export #2.#1}
+\newcommand{\closeexport}{\immediate\closeout\export%
+ \PackageInfo{export}{\MessageBreak
+ End of exportations.\MessageBreak}}
+\newcommand{\ExportLength}[1]{%
+\PackageInfo{export}{Exportation of length #1}%
+\immediate\write\export{\string\setlength{\csname#1\endcsname}%
+ {\the\csname#1\endcsname}}}
+\newcommand{\PreciseExportLength}[1]{%
+\PackageInfo{export}{Precise exportation of length #1}%
+\immediate\write\export{\string\setlength{\csname#1\endcsname}%
+ {\number\csname#1\endcsname sp}}}
+\newcommand{\ExportMuskip}[1]{%
+\PackageInfo{export}{Exportation of muskip #1}%
+\immediate\write\export{\string\setlength{\csname#1\endcsname}%
+ {\the\csname#1\endcsname}}}
+\newcommand{\Export}[1]{%
+\PackageInfo{export}{Exportation of counter #1}%
+\immediate\write\export{\string\setcounter{#1}%
+ {\@arabic\csname c@#1\endcsname}}}
+\newcommand{\ExportParameter}[1]{%
+\PackageInfo{export}{Exportation of parameter #1}%
+\immediate\write\export%
+ {\string\providecommand{\expandafter\noexpand\csname#1\endcsname}%
+ {}}
+\immediate\write\export%
+ {\string\renewcommand{\expandafter\noexpand\csname#1\endcsname}%
+ {\csname#1\endcsname}}}
+\newcommand{\ExportIf}[1]{%
+\PackageInfo{export}{Exportation of the if condition ``#1''}
+\expandafter\csname if#1\endcsname
+\immediate\write\export{\expandafter\noexpand\csname #1true\endcsname}
+\else
+\immediate\write\export{\expandafter\noexpand\csname #1false\endcsname}
+\fi}
+\newcommand{\Import}[2][xpt]{%
+\PackageInfo{export}{\MessageBreak
+Importations from #2.#1\MessageBreak}%
+\InputIfFileExists{#2.#1}{\relax}{\relax}}
+\def\xcaptionf{\refstepcounter{figure} \@dblarg{\@xcaption{figure}}}
+\def\xcaptiont{\refstepcounter{table} \@dblarg{\@xcaption{table}}}
+\def\xcaption#1{\refstepcounter{#1} \@dblarg{\@xcaption{#1}}}
+\long\def\@xcaption#1[#2]#3{\par\addcontentsline{\csname
+ ext@#1\endcsname}{#1}{\protect\numberline{\csname
+ the#1\endcsname}{\ignorespaces #2}}%
+}
+\def\iprotected@write#1#2#3{%
+ \begingroup
+ \let\thepage\relax
+ #2%
+ \let\protect\@unexpandable@protect
+ \edef\reserved@a{\immediate\write#1{#3}}%
+ \reserved@a
+ \endgroup
+ \if@nobreak\ifvmode\nobreak\fi\fi
+}
+\def\@inputx#1{{\def\bibcite##1##2{\relax}\@input{#1}}}
+\newcommand{\AddInputInAux}[1]{%
+ \iprotected@write\@auxout
+ {%
+ \let\label\@gobble \let\index\@gobble \let\glossary\@gobble}%
+ {\string\@inputx{#1}%
+ }%
+ }%
+\newcommand{\ExportPageLayout}{%
+\PackageInfo{export}{\MessageBreak
+Exportation of the PageLayout\MessageBreak}%
+\PreciseExportLength{hsize}
+\PreciseExportLength{vsize}
+\PreciseExportLength{hoffset}
+\PreciseExportLength{voffset}
+\PreciseExportLength{linewidth}
+\PreciseExportLength{columnwidth}
+\PreciseExportLength{columnsep}
+\PreciseExportLength{columnseprule}
+\PreciseExportLength{parindent}
+\ExportLength{parskip}
+\PreciseExportLength{hoffset}
+\PreciseExportLength{voffset}
+\PreciseExportLength{oddsidemargin}
+\PreciseExportLength{evensidemargin}
+\PreciseExportLength{headheight}
+\PreciseExportLength{headsep}
+\PreciseExportLength{textheight}
+\PreciseExportLength{textwidth}
+\PreciseExportLength{paperheight}
+\PreciseExportLength{paperwidth}
+\PreciseExportLength{marginparsep}
+\PreciseExportLength{marginparwidth}
+\PreciseExportLength{marginparpush}
+\PreciseExportLength{footskip}
+\PreciseExportLength{topmargin}
+\PreciseExportLength{topskip}
+\PreciseExportLength{jot}
+\@ifundefined{mathindent}{}{\PreciseExportLength{mathindent}}
+\ExportLength{abovedisplayskip}
+\ExportLength{belowdisplayskip}
+\ExportLength{abovedisplayshortskip}
+\ExportLength{belowdisplayshortskip}
+\ExportLength{floatsep}
+\ExportLength{textfloatsep}
+\ExportLength{dblfloatsep}
+\ExportLength{dbltextfloatsep}
+\ExportLength{intextsep}
+\Export{topnumber}
+\Export{dbltopnumber}
+\Export{bottomnumber}
+\Export{totalnumber}
+\PreciseExportLength{footnotesep}
+\ExportParameter{topfraction}
+\ExportParameter{bottomfraction}
+\ExportParameter{textfraction}
+\ExportParameter{floatpagefraction}
+\ExportParameter{dbltopfraction}
+\ExportParameter{dblfloatfraction}
+\ExportLength{baselineskip}
+\ExportLength{normalbaselineskip}
+\ExportParameter{baselinestretch}
+\PackageInfo{export}{\MessageBreak
+End of exportation of the PageLayout\MessageBreak}}%
+\newcommand{\ExportArrayParams}{%
+\PackageInfo{export}{\MessageBreak
+Exportation of the ArrayParams\MessageBreak}%
+\PreciseExportLength{arraycolsep}
+\PreciseExportLength{tabcolsep}
+\PreciseExportLength{arrayrulewidth}
+\PreciseExportLength{doublerulesep}
+\ExportParameter{arraystretch}
+\PackageInfo{export}{\MessageBreak
+End of exportation of the ArrayParams\MessageBreak}}%
+\endinput
+%%
+%% End of file `export.sty'.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-20 06:37:19 +0000