diff options
Diffstat (limited to 'Master/tlpkg/tlperl.old/lib/Safe.pm')
-rw-r--r-- | Master/tlpkg/tlperl.old/lib/Safe.pm | 576 |
1 files changed, 0 insertions, 576 deletions
diff --git a/Master/tlpkg/tlperl.old/lib/Safe.pm b/Master/tlpkg/tlperl.old/lib/Safe.pm deleted file mode 100644 index e2a608023ca..00000000000 --- a/Master/tlpkg/tlperl.old/lib/Safe.pm +++ /dev/null @@ -1,576 +0,0 @@ -package Safe; - -use 5.003_11; -use strict; - -$Safe::VERSION = "2.12"; - -# *** Don't declare any lexicals above this point *** -# -# This function should return a closure which contains an eval that can't -# see any lexicals in scope (apart from __ExPr__ which is unavoidable) - -sub lexless_anon_sub { - # $_[0] is package; - # $_[1] is strict flag; - my $__ExPr__ = $_[2]; # must be a lexical to create the closure that - # can be used to pass the value into the safe - # world - - # Create anon sub ref in root of compartment. - # Uses a closure (on $__ExPr__) to pass in the code to be executed. - # (eval on one line to keep line numbers as expected by caller) - eval sprintf - 'package %s; %s strict; sub { @_=(); eval q[my $__ExPr__;] . $__ExPr__; }', - $_[0], $_[1] ? 'use' : 'no'; -} - -use Carp; -use Carp::Heavy; - -use Opcode 1.01, qw( - opset opset_to_ops opmask_add - empty_opset full_opset invert_opset verify_opset - opdesc opcodes opmask define_optag opset_to_hex -); - -*ops_to_opset = \&opset; # Temporary alias for old Penguins - - -my $default_root = 0; -my $default_share = ['*_']; #, '*main::']; - -sub new { - my($class, $root, $mask) = @_; - my $obj = {}; - bless $obj, $class; - - if (defined($root)) { - croak "Can't use \"$root\" as root name" - if $root =~ /^main\b/ or $root !~ /^\w[:\w]*$/; - $obj->{Root} = $root; - $obj->{Erase} = 0; - } - else { - $obj->{Root} = "Safe::Root".$default_root++; - $obj->{Erase} = 1; - } - - # use permit/deny methods instead till interface issues resolved - # XXX perhaps new Safe 'Root', mask => $mask, foo => bar, ...; - croak "Mask parameter to new no longer supported" if defined $mask; - $obj->permit_only(':default'); - - # We must share $_ and @_ with the compartment or else ops such - # as split, length and so on won't default to $_ properly, nor - # will passing argument to subroutines work (via @_). In fact, - # for reasons I don't completely understand, we need to share - # the whole glob *_ rather than $_ and @_ separately, otherwise - # @_ in non default packages within the compartment don't work. - $obj->share_from('main', $default_share); - Opcode::_safe_pkg_prep($obj->{Root}) if($Opcode::VERSION > 1.04); - return $obj; -} - -sub DESTROY { - my $obj = shift; - $obj->erase('DESTROY') if $obj->{Erase}; -} - -sub erase { - my ($obj, $action) = @_; - my $pkg = $obj->root(); - my ($stem, $leaf); - - no strict 'refs'; - $pkg = "main::$pkg\::"; # expand to full symbol table name - ($stem, $leaf) = $pkg =~ m/(.*::)(\w+::)$/; - - # The 'my $foo' is needed! Without it you get an - # 'Attempt to free unreferenced scalar' warning! - my $stem_symtab = *{$stem}{HASH}; - - #warn "erase($pkg) stem=$stem, leaf=$leaf"; - #warn " stem_symtab hash ".scalar(%$stem_symtab)."\n"; - # ", join(', ', %$stem_symtab),"\n"; - -# delete $stem_symtab->{$leaf}; - - my $leaf_glob = $stem_symtab->{$leaf}; - my $leaf_symtab = *{$leaf_glob}{HASH}; -# warn " leaf_symtab ", join(', ', %$leaf_symtab),"\n"; - %$leaf_symtab = (); - #delete $leaf_symtab->{'__ANON__'}; - #delete $leaf_symtab->{'foo'}; - #delete $leaf_symtab->{'main::'}; -# my $foo = undef ${"$stem\::"}{"$leaf\::"}; - - if ($action and $action eq 'DESTROY') { - delete $stem_symtab->{$leaf}; - } else { - $obj->share_from('main', $default_share); - } - 1; -} - - -sub reinit { - my $obj= shift; - $obj->erase; - $obj->share_redo; -} - -sub root { - my $obj = shift; - croak("Safe root method now read-only") if @_; - return $obj->{Root}; -} - - -sub mask { - my $obj = shift; - return $obj->{Mask} unless @_; - $obj->deny_only(@_); -} - -# v1 compatibility methods -sub trap { shift->deny(@_) } -sub untrap { shift->permit(@_) } - -sub deny { - my $obj = shift; - $obj->{Mask} |= opset(@_); -} -sub deny_only { - my $obj = shift; - $obj->{Mask} = opset(@_); -} - -sub permit { - my $obj = shift; - # XXX needs testing - $obj->{Mask} &= invert_opset opset(@_); -} -sub permit_only { - my $obj = shift; - $obj->{Mask} = invert_opset opset(@_); -} - - -sub dump_mask { - my $obj = shift; - print opset_to_hex($obj->{Mask}),"\n"; -} - - - -sub share { - my($obj, @vars) = @_; - $obj->share_from(scalar(caller), \@vars); -} - -sub share_from { - my $obj = shift; - my $pkg = shift; - my $vars = shift; - my $no_record = shift || 0; - my $root = $obj->root(); - croak("vars not an array ref") unless ref $vars eq 'ARRAY'; - no strict 'refs'; - # Check that 'from' package actually exists - croak("Package \"$pkg\" does not exist") - unless keys %{"$pkg\::"}; - my $arg; - foreach $arg (@$vars) { - # catch some $safe->share($var) errors: - croak("'$arg' not a valid symbol table name") - unless $arg =~ /^[\$\@%*&]?\w[\w:]*$/ - or $arg =~ /^\$\W$/; - my ($var, $type); - $type = $1 if ($var = $arg) =~ s/^(\W)//; - # warn "share_from $pkg $type $var"; - *{$root."::$var"} = (!$type) ? \&{$pkg."::$var"} - : ($type eq '&') ? \&{$pkg."::$var"} - : ($type eq '$') ? \${$pkg."::$var"} - : ($type eq '@') ? \@{$pkg."::$var"} - : ($type eq '%') ? \%{$pkg."::$var"} - : ($type eq '*') ? *{$pkg."::$var"} - : croak(qq(Can't share "$type$var" of unknown type)); - } - $obj->share_record($pkg, $vars) unless $no_record or !$vars; -} - -sub share_record { - my $obj = shift; - my $pkg = shift; - my $vars = shift; - my $shares = \%{$obj->{Shares} ||= {}}; - # Record shares using keys of $obj->{Shares}. See reinit. - @{$shares}{@$vars} = ($pkg) x @$vars if @$vars; -} -sub share_redo { - my $obj = shift; - my $shares = \%{$obj->{Shares} ||= {}}; - my($var, $pkg); - while(($var, $pkg) = each %$shares) { - # warn "share_redo $pkg\:: $var"; - $obj->share_from($pkg, [ $var ], 1); - } -} -sub share_forget { - delete shift->{Shares}; -} - -sub varglob { - my ($obj, $var) = @_; - no strict 'refs'; - return *{$obj->root()."::$var"}; -} - - -sub reval { - my ($obj, $expr, $strict) = @_; - my $root = $obj->{Root}; - - my $evalsub = lexless_anon_sub($root,$strict, $expr); - return Opcode::_safe_call_sv($root, $obj->{Mask}, $evalsub); -} - -sub rdo { - my ($obj, $file) = @_; - my $root = $obj->{Root}; - - my $evalsub = eval - sprintf('package %s; sub { @_ = (); do $file }', $root); - return Opcode::_safe_call_sv($root, $obj->{Mask}, $evalsub); -} - - -1; - -__END__ - -=head1 NAME - -Safe - Compile and execute code in restricted compartments - -=head1 SYNOPSIS - - use Safe; - - $compartment = new Safe; - - $compartment->permit(qw(time sort :browse)); - - $result = $compartment->reval($unsafe_code); - -=head1 DESCRIPTION - -The Safe extension module allows the creation of compartments -in which perl code can be evaluated. Each compartment has - -=over 8 - -=item a new namespace - -The "root" of the namespace (i.e. "main::") is changed to a -different package and code evaluated in the compartment cannot -refer to variables outside this namespace, even with run-time -glob lookups and other tricks. - -Code which is compiled outside the compartment can choose to place -variables into (or I<share> variables with) the compartment's namespace -and only that data will be visible to code evaluated in the -compartment. - -By default, the only variables shared with compartments are the -"underscore" variables $_ and @_ (and, technically, the less frequently -used %_, the _ filehandle and so on). This is because otherwise perl -operators which default to $_ will not work and neither will the -assignment of arguments to @_ on subroutine entry. - -=item an operator mask - -Each compartment has an associated "operator mask". Recall that -perl code is compiled into an internal format before execution. -Evaluating perl code (e.g. via "eval" or "do 'file'") causes -the code to be compiled into an internal format and then, -provided there was no error in the compilation, executed. -Code evaluated in a compartment compiles subject to the -compartment's operator mask. Attempting to evaluate code in a -compartment which contains a masked operator will cause the -compilation to fail with an error. The code will not be executed. - -The default operator mask for a newly created compartment is -the ':default' optag. - -It is important that you read the Opcode(3) module documentation -for more information, especially for detailed definitions of opnames, -optags and opsets. - -Since it is only at the compilation stage that the operator mask -applies, controlled access to potentially unsafe operations can -be achieved by having a handle to a wrapper subroutine (written -outside the compartment) placed into the compartment. For example, - - $cpt = new Safe; - sub wrapper { - # vet arguments and perform potentially unsafe operations - } - $cpt->share('&wrapper'); - -=back - - -=head1 WARNING - -The authors make B<no warranty>, implied or otherwise, about the -suitability of this software for safety or security purposes. - -The authors shall not in any case be liable for special, incidental, -consequential, indirect or other similar damages arising from the use -of this software. - -Your mileage will vary. If in any doubt B<do not use it>. - - -=head2 RECENT CHANGES - -The interface to the Safe module has changed quite dramatically since -version 1 (as supplied with Perl5.002). Study these pages carefully if -you have code written to use Safe version 1 because you will need to -makes changes. - - -=head2 Methods in class Safe - -To create a new compartment, use - - $cpt = new Safe; - -Optional argument is (NAMESPACE), where NAMESPACE is the root namespace -to use for the compartment (defaults to "Safe::Root0", incremented for -each new compartment). - -Note that version 1.00 of the Safe module supported a second optional -parameter, MASK. That functionality has been withdrawn pending deeper -consideration. Use the permit and deny methods described below. - -The following methods can then be used on the compartment -object returned by the above constructor. The object argument -is implicit in each case. - - -=over 8 - -=item permit (OP, ...) - -Permit the listed operators to be used when compiling code in the -compartment (in I<addition> to any operators already permitted). - -You can list opcodes by names, or use a tag name; see -L<Opcode/"Predefined Opcode Tags">. - -=item permit_only (OP, ...) - -Permit I<only> the listed operators to be used when compiling code in -the compartment (I<no> other operators are permitted). - -=item deny (OP, ...) - -Deny the listed operators from being used when compiling code in the -compartment (other operators may still be permitted). - -=item deny_only (OP, ...) - -Deny I<only> the listed operators from being used when compiling code -in the compartment (I<all> other operators will be permitted). - -=item trap (OP, ...) - -=item untrap (OP, ...) - -The trap and untrap methods are synonyms for deny and permit -respectfully. - -=item share (NAME, ...) - -This shares the variable(s) in the argument list with the compartment. -This is almost identical to exporting variables using the L<Exporter> -module. - -Each NAME must be the B<name> of a non-lexical variable, typically -with the leading type identifier included. A bareword is treated as a -function name. - -Examples of legal names are '$foo' for a scalar, '@foo' for an -array, '%foo' for a hash, '&foo' or 'foo' for a subroutine and '*foo' -for a glob (i.e. all symbol table entries associated with "foo", -including scalar, array, hash, sub and filehandle). - -Each NAME is assumed to be in the calling package. See share_from -for an alternative method (which share uses). - -=item share_from (PACKAGE, ARRAYREF) - -This method is similar to share() but allows you to explicitly name the -package that symbols should be shared from. The symbol names (including -type characters) are supplied as an array reference. - - $safe->share_from('main', [ '$foo', '%bar', 'func' ]); - - -=item varglob (VARNAME) - -This returns a glob reference for the symbol table entry of VARNAME in -the package of the compartment. VARNAME must be the B<name> of a -variable without any leading type marker. For example, - - $cpt = new Safe 'Root'; - $Root::foo = "Hello world"; - # Equivalent version which doesn't need to know $cpt's package name: - ${$cpt->varglob('foo')} = "Hello world"; - - -=item reval (STRING) - -This evaluates STRING as perl code inside the compartment. - -The code can only see the compartment's namespace (as returned by the -B<root> method). The compartment's root package appears to be the -C<main::> package to the code inside the compartment. - -Any attempt by the code in STRING to use an operator which is not permitted -by the compartment will cause an error (at run-time of the main program -but at compile-time for the code in STRING). The error is of the form -"'%s' trapped by operation mask...". - -If an operation is trapped in this way, then the code in STRING will -not be executed. If such a trapped operation occurs or any other -compile-time or return error, then $@ is set to the error message, just -as with an eval(). - -If there is no error, then the method returns the value of the last -expression evaluated, or a return statement may be used, just as with -subroutines and B<eval()>. The context (list or scalar) is determined -by the caller as usual. - -This behaviour differs from the beta distribution of the Safe extension -where earlier versions of perl made it hard to mimic the return -behaviour of the eval() command and the context was always scalar. - -Some points to note: - -If the entereval op is permitted then the code can use eval "..." to -'hide' code which might use denied ops. This is not a major problem -since when the code tries to execute the eval it will fail because the -opmask is still in effect. However this technique would allow clever, -and possibly harmful, code to 'probe' the boundaries of what is -possible. - -Any string eval which is executed by code executing in a compartment, -or by code called from code executing in a compartment, will be eval'd -in the namespace of the compartment. This is potentially a serious -problem. - -Consider a function foo() in package pkg compiled outside a compartment -but shared with it. Assume the compartment has a root package called -'Root'. If foo() contains an eval statement like eval '$foo = 1' then, -normally, $pkg::foo will be set to 1. If foo() is called from the -compartment (by whatever means) then instead of setting $pkg::foo, the -eval will actually set $Root::pkg::foo. - -This can easily be demonstrated by using a module, such as the Socket -module, which uses eval "..." as part of an AUTOLOAD function. You can -'use' the module outside the compartment and share an (autoloaded) -function with the compartment. If an autoload is triggered by code in -the compartment, or by any code anywhere that is called by any means -from the compartment, then the eval in the Socket module's AUTOLOAD -function happens in the namespace of the compartment. Any variables -created or used by the eval'd code are now under the control of -the code in the compartment. - -A similar effect applies to I<all> runtime symbol lookups in code -called from a compartment but not compiled within it. - - - -=item rdo (FILENAME) - -This evaluates the contents of file FILENAME inside the compartment. -See above documentation on the B<reval> method for further details. - -=item root (NAMESPACE) - -This method returns the name of the package that is the root of the -compartment's namespace. - -Note that this behaviour differs from version 1.00 of the Safe module -where the root module could be used to change the namespace. That -functionality has been withdrawn pending deeper consideration. - -=item mask (MASK) - -This is a get-or-set method for the compartment's operator mask. - -With no MASK argument present, it returns the current operator mask of -the compartment. - -With the MASK argument present, it sets the operator mask for the -compartment (equivalent to calling the deny_only method). - -=back - - -=head2 Some Safety Issues - -This section is currently just an outline of some of the things code in -a compartment might do (intentionally or unintentionally) which can -have an effect outside the compartment. - -=over 8 - -=item Memory - -Consuming all (or nearly all) available memory. - -=item CPU - -Causing infinite loops etc. - -=item Snooping - -Copying private information out of your system. Even something as -simple as your user name is of value to others. Much useful information -could be gleaned from your environment variables for example. - -=item Signals - -Causing signals (especially SIGFPE and SIGALARM) to affect your process. - -Setting up a signal handler will need to be carefully considered -and controlled. What mask is in effect when a signal handler -gets called? If a user can get an imported function to get an -exception and call the user's signal handler, does that user's -restricted mask get re-instated before the handler is called? -Does an imported handler get called with its original mask or -the user's one? - -=item State Changes - -Ops such as chdir obviously effect the process as a whole and not just -the code in the compartment. Ops such as rand and srand have a similar -but more subtle effect. - -=back - -=head2 AUTHOR - -Originally designed and implemented by Malcolm Beattie, -mbeattie@sable.ox.ac.uk. - -Reworked to use the Opcode module and other changes added by Tim Bunce -E<lt>F<Tim.Bunce@ig.co.uk>E<gt>. - -=cut - |