diff options
Diffstat (limited to 'Master/texmf-dist')
17 files changed, 0 insertions, 3723 deletions
diff --git a/Master/texmf-dist/doc/latex/ednotes/CHANGES.txt b/Master/texmf-dist/doc/latex/ednotes/CHANGES.txt deleted file mode 100644 index d61018d3fbd..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/CHANGES.txt +++ /dev/null @@ -1,261 +0,0 @@ -CHANGES 2006/10/05 [without CTAN-ann]: - -README -> READMORE.txt, new README, CHANGING.txt, -copy of recent perpage.sty, changes of documentation -concerning perpage.sty/longtable.sty in the text files -and in ednotes.sty. - - -CHANGES for UNDERLYING lineno.sty v4.41 2005/11/02: - -1. Loadable after amsmath. - -2. Removed some nonsense from documentation. - - -CHANGES for UNDERLYING lineno.sty v4.4 2005/10/27: -[failed to be uploaded to CTAN]: - -1. Proper effective line depth at end of paragraphs. - The spacing bug was quite obvious in two-column mode - when a paragraph end was at a column bottom. - -2. Another bug concerning two-column mode that had been - introduced in v4.22 has been removed again. - -3. Support for \addvspace introduced more and more bugs - in versions of v4.32 and v4.33. The reasons seem to - be clear now, v4.4 should be stable, and the series - of bug reports seems to have stopped. - - -CHANGES for UNDERLYING lineno.sty v4.32 2005/10/17: - (see lineno.pdf ...) - -1. Support for \addvspace - (a math display or a list meets a heading -- or the like). - -2. Clearly explained former option `displaymath' and its change - to a default. - - -CHANGES for ednotes.sty v1.2 and UNDERLYing lineno.sty v4.31 -2005/10/01: - -1. ednotes.sty offers \PrecedeLevelWith for visually identifying - apparatuses (think of pages where only one of them appears) - or for controlling the shape of one or another - apparatus paragraph (maybe depending on apparatus). - (Requires manyfoot.sty v1.9!) - -2. lineno.sty offers \modulolinenumbers* and a package option - `modulo*' for printing first line number after interrupting - editor's text, regardless of the modulo. - -3. To prevent lemma code from working in the apparatus - (`fol...', e.g.), ednotes.sty now offers \notinnote - (replacing \notthislemma, now without `undefined c...'). - -4. Improved lineno.sty's explanation of \firstlinenumber and - package options. - -5. Supplied some hash mark doublings in advice for customizing - ednotes.sty . - - -CHANGES for UNDERLYing lineno.sty v4.3 2005/04/28--05/16: - -1. Re-implemented modulo mode -- disabling certain users' tricks - see lineno.pdf sec. 5.5, also for a still supported - substituting trick. - -2. Option `displaymath' (proper numbering at paragraphs - containing math displays) becomes default. - -3. Compatibility with hyperref now indeed (at least much more). - -4. Documentation tidied up. - -5. Restored "global" version of numbering lines of a \parbox or - minipage or ..., explained in documentation (lineno.pdf/dvi - subsec. 7.2). - -6. Additional internal improvements that perhaps hardly are - observable (no more spurious linenumbers in math displays - from vertical mode; \flushbuttom with `twocolomnuns' and - `switch' etc.; some compatibity with packages that use - \holdinginserts; \linelabel in headings etc.). - - -CHANGES for UNDERLYing lineno.sty v4.2 2005/04/26: - -1. Re-enabled package option `displaymath' (needed rearrangement - after lineno.pdf sec. 5). - -2. New package option `addpageno' for adding page numbers to - line number references -- see sec. 6.1 of lineno.pdf. - -3. Improved support for \includeonly (and improved lineno.pdf - sec. 5.3, p. 27). - -4. Please note problems with \marginpar, figures, and tables - which tameflts.sty deals with -- see ...: - -5. Improved compatibility with other packages that change \output - (tameflts.sty, e.g., for saving footnotes against \marginpar - and floats), added advice on this matter -- see lineno.pdf - sec. 2.3, pp. 7, 14f. - - -CHANGE OF EDNOTES BUNDLE 2005/04/09 - -Due to my (ul) misconception of `nccfoots', unwanted footnote -marks could occur. This is corrected with v1.12 . (Earlier -today a package ennccptc.sty appeared, please remove it in case -you have used it.) - - -CHANGES OF EDNOTES BUNDLE 2005/03/08 - -This update is mainly concerned with -1. the number of possible notes, -2. page break oscillations, -3. `array' and similar mathematical environments, and with -4. a hopefully helpful error message; also with -5. amendments of documentation. - -Namely: - -1. Reimplementation of `ednotes.sty' with version v1.1, vital - for huge editions ("commercial"/"professional" applications): - "compression" of note placement data, a single control string - instead of three per note stores them. So you can now make - three times as many notes as before, regarding the memory - compartment for multiletter control strings. -- One user - exhausted this by 10.000 notes on 450 pages (recent MiKTeX - installation). Now he can go on ... (These note placement - data are needed for references in the apparatus.) - - WARNINGs: - - (a) If you have customized or used \repeatref and/or - \linewithpage, please read what the section on `customizing' - of `ednotes.sty' tells concerning v1.1 (changes were - required). - - (b) In case you really use option `countoccurrences' of - `ednotes.sty', edcntwd0.sty needs to be updated to v0.31. - -2. A checking function has been added for finding startings - of page break oscillations. These typically must be fixed - for getting correct references to lemmas in the apparatus. - - WARNING: You may recently have noticed `lblchng1.sty' and - what it tells about page break oscillations. With ednotes.sty - v1.1, `lblchng1.sty' v0.2 is no longer quite correct, please - notice v0.32 (if the problem interests or tortures you). - -3. The `edtable' option of `ednotes.sty' now supports math - environments like `array'. This requires updating edtable.sty - to v1.3. (The claim in previous versions of `edtable.sty' on - this support simply was wrong, sorry.) For how to make use of - this support, we urge you to read the usage instructions in - `edtable.sty' (v1.3). These have been extended very much, - structured more clearly, and supplied with examples. - -4. \linelabel now complains when appearing outside line - numbering mode. This may be useful when you have forgotten to - switch into line numbering mode and wonder why all notes - refer to line 1. If you don't know about \linelabel: Each - note uses it internally, therefore you may profit. - -5. The subsection on `edtable' in `lineno.sty/tex/pdf' and its - final list of user commands in lineno.sty/tex/pdf were not - quite correct or complete -- corrected or somewhat improved. - `ednotugb.pdf', which derives from a TUGboat article on the - subject, now briefly refers to the memory problem of 1. above - and amends the description of `edtable'. - - -CHANGES OF EDNOTES BUNDLE 2005/01/20 - -1. Thanks to Alexander Rozhenko, you now can download most -recent "unpacked" versions of manyfoot.sty and nccfoots.sty --- no more generating procedure. - -2. The README.txt addresses indexing with line numbers. - -3. The original TUGboat article `tb77lueck.pdf' has been -corrected and updated -- resulting in `ednotugb.pdf'. - -4. `ednotes.sty' and `ednotugb.pdf' refer to the `ellipsis' -package concerning spacing with the ellipsis dots. - - -CHANGES OF EDNOTES BUNDLE 2004/10/26 - -You may find a file README4U.txt that is more detailed than the -present one and that just addresses changes from 2004/08/23 to -2004/10/19, especially for earlier users.] - - -CHANGES OF EDNOTES BUNDLE 2004/10/19 - -1. Module files are now handled by new ednotes.sty options -`edtable', `longtable', `nolongtablepatch', `edmacpara', -`countoccurrences', and `mathnotes' (+ `perpage', new module) ---so they are no longer loaded by explicit \usepackage. - --> UPDATE RECOMMENDATION: - - To support these package options, the following packages - were changed, at least concerning instructions. - - edcntwd0.sty - ednotes.sty - ednmath0.sty - edtable.sty - lineno.sty - mfparptc.sty - mfparxsp.sty - - So we recommend that you download these from - - [CTAN]/macros/latex/contrib/ednotes - - and overwrite the earlier versions with them! - -- And be sure to have manyfoot.sty v1.7! - (See README.txt for how to obtain it.) - - (mfparxsp.sty may even be deleted, see inside or - previous change described below. Using new option `perpage', - moreover, may require downloading and installing perpage.sty) - -lineno.sty climbs to version 4.1, ednotes.sty to 1.0. - -2. lineno.tex/pdf has been updated accordingly. A new interim -version of a TUGboat article (tb77lueck.pdf, same ednotes -directory) describes the bundle as it appears now. The final -version of the article will be exhibited at the TUGboat web site. - - -CHANGES OF EDNOTES BUNDLE 2004/09/21 - -1. With lineno.sty version 4.00 (CTAN folder -/macros/latex/contrib/lineno), linenox0.sty, linenox1.sty, and -lnopatch.sty are obsolete. Don't load them any more! lineno.sty -should produce a reminder for changing your related \usepackage -commands. For a slight change of \firstlinenumber, see -lineno.sty/tex/pdf. - -2. With manyfoot.sty version 1.7 (CTAN folder -/macros/latex/contrib/ncctools), mfparxsp.sty is obsolete. -Please replace \MFparaxbuffer by \ExtraParaSkip and don't load -mfparxsp.sty any more. For your earlier documents, we offer a -new version of mfparxsp.sty which just reminds you of the -change and ("for this time") redirects your \MFparaxbuffer to -Alex Rozhenko's \ExtraParaSkip. You may delete it right now--or -when you are sure that you won't anymore compile a .tex -containing \MFparaxbuffer and \usepackage{mfparaxbuffer}. - - diff --git a/Master/texmf-dist/doc/latex/ednotes/CHANGING.txt b/Master/texmf-dist/doc/latex/ednotes/CHANGING.txt deleted file mode 100644 index 34baa7dbd88..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/CHANGING.txt +++ /dev/null @@ -1,127 +0,0 @@ - ======================================= - ednotes is CHANGING on and on ... - - October 2006, Uwe Lueck - http://www.contact-ednotes.sty.de.vu - ======================================= - - - ABSTRACT: - - This file is to draw your attention to the *possibility* that - the version of the ednotes bundle that you have received lacks - *recent improvements* -- and to how to profit from such - improvements. Some improvements under present work or consideration - are *listed*. - - -POSSIBLE REASONS: - -Maybe you have got the bundle files from a TeX Live CD or DVD --- which usually is not updated as often as ednotes is updated. -Or you have received the files from somewhere else than from CTAN -or TeX Live. Or you just are not in the mood sufficiently often to -check whether ednotes has been updated recently. Or the maintainers -of ednotes have made the improvement privately, yet are not ready to -send it around at the moment. - -Sorry, due to the complexity of ednotes and to our limited resources, -we really cannot promise that each release or upload of ednotes is -error-free. (I always do some basic tests of changes, but it is quite -impossible to test all "possible situations". Sometimes a foolish typo -shows up only in a very special situation.) A "recent improvement" -(as I called it) thus may just be a correction of recently introduced -errors, having been uploaded to CTAN shortly after the (bad) files -that you have received were collected. - -Or better: in working with ednotes, you may discover possibilities -to increase its functionality. Indeed, we sometimes get such ideas in -using the bundle ourselves. Please report problems you encounter with -ednotes via the above URL, as well as suggestions for new ednotes -features. (Again however, we may be unable to follow such a suggestion -immediately/soon.) -- We receive such problem reports and suggestions -every few weeks or months and usually try to account for them; -so you might profit from recognizing such developments -- more often -than (say) once a year. - - -RECEIVE UPDATE-ALERTS BY E-MAIL: - -After subscribing to the mailing list for CTAN announcements - - https://lists.dante.de/mailman/listinfo/ctan-ann - -you will be automatically informed when an update of the ednotes -bundle has been uploaded to CTAN -- the Comprehensive TeX Archive -Network. Of course you will be informed about uploads and updates -of many other packages than ednotes -- and this is a nice, little -time-consuming way of being informed what macro and font packages -etc. there are. - -Moreover, I maintain a newsletter about ednotes to which you can -subscribe via the URL above below the title of the present file. -I usually inform the subscribers when new ednotes files have been -installed on CTAN. Sometimes I write a little more in the newsletter -than what is announced on the CTAN announcements mailing list. - - -TO UPDATE: - -For the most basic way, you can download the most recent public -version of the ednotes bundle by downloading the - - http://tug.ctan.org/tex-archive/macros/latex/contrib/ednotes - -subdirectory of CTAN. You may know or learn about substituting -"tug.ctan.org/tex-archive" appropriately to address a nearby CTAN -mirror -- indeed when you try the previous, you may be offered URLs -of several CTAN mirrors out of which you can choose your favourite -mirror for the future. The downloading procedures that the mirrors -offer may slightly differ, but it's easy nowadays anyway. You may -better leave "ednotes" away in the previous URL and just look for -"ednotes" in the "contrib" subdirectory. -- The README that should -have come along with your copy of the ednotes bundle should direct -you how to properly install the new packages on your machine. - -For Windows, there is the - - http://ctan.tug.org/tex-archive/systems/win32/miktex/ - -distribution; cf. - - http://texcatalogue.sarovar.org/entries/miktex.html - http://tug.ctan.org/cgi-bin/ctanPackageInformation.py?id=miktex - --- which includes an updating manager that makes updating very easy. - -Note that a recent version of ednotes may need updating other -packages, cf. `READMORE.txt'. - - -PLANNED IMPROVEMENTS: - -* \multicolumn in tables/arrays presents a problem to ednotes, a - first solution to which just has been prepared; I am pondering how - to implement a more comfortable way to deal with the problem. - Another improvement with tables/arrays is near. - -* More substantially: The bigfoot package by David Kastrup has - appeared on CTAN: - - http://tug.ctan.org/tex-archive/macros/latex/contrib/bigfoot - - -- it very much improves the performance of the manyfoot package - that underlies ednotes. Something (perhaps?) must be added to - ednotes in order to use bigfoot. - -* Recently I discovered that Peter Wilson's memoir class - - http://tug.ctan.org/tex-archive/macros/latex/contrib/memoir - - -- that many people use to have more flexibility than with the - Standard LaTeX classes -- offers footnote facilities that are - similar to those of manyfoot and bigfoot. It should be easy - to offer an option to use ednotes with memoir without using - manyfoot or bigfoot. - - diff --git a/Master/texmf-dist/doc/latex/ednotes/README b/Master/texmf-dist/doc/latex/ednotes/README deleted file mode 100644 index 57326615da4..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/README +++ /dev/null @@ -1,47 +0,0 @@ -EDNOTES.STY -- typesetting scholarly critical editions with LaTeX - -- (C) Uwe Lueck, dir. Christian Tapp 2003--2006 - -Scholarly critical editions: - -- line numbers are printed in the margin; - -- you refer to them in one or two footnote layers or more. - -Visit http://ednotes.sty.de.vu for learning more about the matter. - -The present file `README' refers to the content of the CTAN -subdirectory /macros/latex/contrib/ednotes/. - -The files contained in the same subdirectory are subject to the -LaTeX Project Public License -- see - - http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html - - For COPYRIGHTs as well as conditions of use (NO WARRANTY), - MODIFYING, and (RE)DISTRIBUTION, please see inside the files - mentioned in the present `READMORE.txt' file, as well as - `README-lineno.txt' and `README-ncctools.txt'. Usually, the LaTeX - Project Public License applies, a recent version of which can be - found on - - http://www.latex-project.org/lppl.txt - - Any REDISTRIBUTION of `ednotes.sty' must contain the present - `README' file. - - If you DISTRIBUTE `manyfoot.sty' and `nccfoots.sty', they must be - accompanied by `manyfoot.dtx', `nccfoots.dtx', and - `README-ncctools.txt'. - -For additional informations (installing; other kinds of usage ...), -please see READMORE.txt next. - --- Most notably: Packages lineno.sty, manyfoot.sty, nccfoots.sty -are required, to be found in CTAN subdirectories - - /macros/latex/contrib/lineno/ - /macros/latex/contrib/ncctools/ - -or maybe in another subdirectory of /macros/latex/contrib/ -(enter `manyfoot' to http://tug.ctan.org/search.html). -With TeXLive, /ncctools/ is in collection-latexextra. - --- UL, 2006/10/05 diff --git a/Master/texmf-dist/doc/latex/ednotes/README.TEXLIVE b/Master/texmf-dist/doc/latex/ednotes/README.TEXLIVE deleted file mode 100644 index e89383716ee..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/README.TEXLIVE +++ /dev/null @@ -1,7 +0,0 @@ -The following files have been removed in the TeX Live installation of -the current package, typically due to duplication, lack of space, or -missing source code. You can find these files on CTAN at - http://mirror.ctan.org/macros/latex/contrib/ednotes -If questions or concerns, email tex-live@tug.org. - - perpage.sty diff --git a/Master/texmf-dist/doc/latex/ednotes/README4U.txt b/Master/texmf-dist/doc/latex/ednotes/README4U.txt deleted file mode 100644 index 93d3552a42a..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/README4U.txt +++ /dev/null @@ -1,209 +0,0 @@ -README4U: - -****************************************************************** -*** *** -*** Changes from ednotes.sty v0.64 to v1.0 *** -*** *** -*** (Uwe Lueck, 2004/10/21) *** -*** *** -****************************************************************** - - - -* SUMMARY: * - - Since August 2004, the number of bundle files has been reduced. - Many of the remaining files have changed, some essentially, - others with respect to usage instructions. We explain how to - update your Ednotes installation accordingly. Optional - "patches", enhancements etc. that earlier had to be called by - loading separate files explicitly (mandatory arguments of - \usepackage) are now called by ednotes.sty package options - (optional arguments in \usepackage[<opt>]{ednotes}). New PDF - documentations/instructions have appeared. - - -* Contents of this file: * - - LN/MF_edn.zip -- ednotes/lineno/manyfoot/further changes -- - updating procedure -- new documentations - - -* Some files you may have received: * - - You may have received (by e-mail from us, e.g.) a distribution - containing files - - LN_edn.zip - MF_edn.zip - - They serve two purposes: - - 1. They contain the files README and CHANGES that reside in the - CTAN directories `[...]/lineno' and `[...]/ncctools' (from - which manyfoot.sty stems). In order to avoid that README and - CHANGES files overwrite each other, unzip them into separate - directories, and into another one than the README file (for - ednotes.sty) that you should have received as a plain text - file. - - 2. LEGAL, IMPORTANT: - - The files README, manyfoot.dtx, and nccfoots.dtx contained in - MF_edn.zip are, by their copyright holder Alexander Rozhenko, - demanded to ACCOMPANY any (re)DISTRIBUTION of manyfoot.sty - and nccfoots.sty! - - -* ednotes.sty changes: * - - 1. ednotes.sty version 1.0 has new package options `edtable', - `longtable', `nolongtablepatch', `edmacpara', - `countoccurrences', and `mathnotes' for handling "patch" or - enhancement etc. files. None of these files should be loaded - through the mandatory argument of \usepackage any more. E.g., - instead of \usepackage{edtable}, you now type - - \usepackage[edtable,<further options>]{ednotes} . - - (So -- one advantage aimed at -- you must no longer worry - about the correct order of loading extension packages.) - - 2. The above-mentioned option `nolongtablepatch' changes earlier - behaviour with respect to our longtable.sty patch file - ltabptch.sty, in avoiding an error message that otherwise - appears when ltabptch.sty is not present. This is convenient - when you deliberately want to avoid the patch. The error - message ensures that vertical spacing around a "longtable" - does not depend on the local TeX installation -- e.g., when - you send your source to a journal. - - 3. ednotes.sty has a new option `perpage' for making use of the - manyfoot.sty option `perpage' -- just see the Manyfoot - documentation for what it does. It requires perpage.sty, - which is available from [CTAN]/macros/latex/contrib/misc. - - -* lineno.sty changes: * - - 1. The new version 4.1 of lineno.sty makes former extension - files linenox0.sty, linenox1.sty, and lnopatch.sty obsolete. - Don't load them any more! (We have installed a reminder for - the case that you don't obey this rule.) - - 2. \firstlinenumber has slightly changed from its earlier - behaviour given by lnopatch.sty. See lineno.sty/tex/pdf. - - -* manyfoot.sty changes: * - - The new version 1.7 of manyfoot.sty provides a command - \ExtraParaSkip to replace our earlier \MFparaxbuffer. - (See the new ednotes.sty documentation to recall - \MFparaxbuffer -- search for `\ExtraParaSkip', e.g.) - This makes former extension file mfparxsp.sty obsolete. - Please replace \MFparaxbuffer by \ExtraParaSkip and don't - load mfparxsp.sty any more! For your earlier documents that - contain \usepackage{mfparxsp}, we offer a new version of - mfparxsp.sty which just reminds you of the change and - ("for this time") redirects your \MFparaxbuffer to - \ExtraParaSkip. You may as well just delete your copy of - mfparxsp.sty, if you are sure, e.g., that you won't anymore - compile a .tex containing \MFparaxbuffer and - \usepackage{mfparaxbuffer}. - - -* Further corresponding changes: * - - Extension files that still are used -- now required by the new - ednotes.sty package options -- have been changed at least with - respect to explanations that they contain. - - -* UPDATING: * - - 1. (Mandatory:) overwrite your copies of - - edcntwd0.sty - ednmath0.sty - ednotes.sty - edtable.sty - lineno.sty - manyfoot.sty - mfparptc.sty - - with the new versions. - - 2. Overwrite - - mfparxsp.sty - - by our new "reminder" version, or just remove it from TeX's - searching scope -- as you like, recall `manyfoot.sty changes' - avove. - - 3. You may remove (from TeX's searching scope) linenox0.sty, - linenox1.sty, lnopatch.sty -- but they won't harm otherwise; - you will get an error message if you load one of them - inadvertently. - - -* New documentation/instructions: * - - 1. An article on ednotes.sty is appearing in TUGboat vol. 24. - It describes the main commands and functions of Ednotes. - Moreover, it compares Ednotes to EDMAC and LEDMAC, two other - TeX macro packages for critical edition typesetting. - We provide a version of the article very near to the final - one as - - tb77lueck.pdf . - - (it is definitively not the final version.) - - 2. The README for ednotes.sty has been rewritten very much and - may yield new insights. Detailed explanations addressing - non-TeXperts have been added. - - 3. lineno.tex has been updated according to the changes of - lineno.sty, of course. A pdflatex outcome - - lineno.pdf - - is available ([CTAN]/macros/latex/contrib/lineno/lineno.pdf). - - A pdflatex outcome - - ulineno.pdf - - of the user's guide ulineno.tex is available as well. - It only deals with lineno.sty version 3.1, but will though - be helpful (I think). - - Recall that lineno.sty offers many commands to control the - style of the marginal line numbers, so its documentation is - an essential contribution to ednotes.sty documentation. - - 4. Version 1.7 of manyfoot.sty is generated from the - corresponding version of - - manyfoot.dtx - - which is the TeX source for the documentation of - manyfoot.sty. Recently, the pdflatex output - - manyfoot.pdf - - has been added to CTAN directory ncctools. These two files - may be less essential for ednotes.sty users than - (u)lineno.tex/pdf. However, manyfoot.sty offers features - that you may find interesting: (i) customize rules between - footnote layers; (ii) \SplitNote (for paragraphed footnotes - at page breaks). (For nccfoots.sty, which manyfoot.sty - requires, there are nccfoots.dtx/pdf as well.) - - -Good Luck! - - -[End of README4U] diff --git a/Master/texmf-dist/doc/latex/ednotes/READMORE.txt b/Master/texmf-dist/doc/latex/ednotes/READMORE.txt deleted file mode 100644 index 340c8b21686..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/READMORE.txt +++ /dev/null @@ -1,230 +0,0 @@ -====================+=====+=======++=======+=====+==================== - - FIRST INSTRUCTIONS - for - EDNOTES - Distribution 2006 - (this file October 5, 2006) - - Uwe Lueck, dir. Christian Tapp - http://www.contact-ednotes.sty.de.vu - -====================+=====+=======++=======+=====+==================== - -CONTENTs of the present file: - - Purpose -- recent (future) changes -- RIGHTS -- installing `ednotes' - -- learning about `ednotes' -- standalone packages -- contact us -- - newsletter -- glossary - -PURPOSE of the macros: - - Here are macros for typesetting CRITICAL EDITIONS with LaTeX. - Packages `lineno' by Stephan I. B"ottcher, `manyfoot' by Alexander - I. Rozhenko, and `longtable' by David Carlisle are enhanced and - combined. -- For a few first informations, you may have a look at - http://ednotes.sty.de.vu. - -** RECENT (FUTURE) CHANGES: ** - - If you have used `ednotes' earlier than September 2004, we urge you - to read the `CHANGES' file in the `ednotes' directory, especially - concerning the changes of September/October 2004. `ednotes', - `lineno', and `manyfoot' have been changed at one time and interact - differently than before. Some files have been removed, and former - extension packages are now automatically loaded on `ednotes' package - options. -- Other changes have happened more recently, most notably - in `manyfoot' and `nccfoots'. In general, you should find a LaTeX - warning on screen or in your job.log like - - You have requested ... version ... of ... - but only version ... is available - - telling what other packages need to be updated. - - `CHANGING.txt' deals with the possibility that you haven't got the - most recent version of `ednotes' and friends. - -RIGHTs: - - For COPYRIGHTs as well as conditions of use (NO WARRANTY), - MODIFYING, and (RE)DISTRIBUTION, please see inside the files - mentioned in the present `README' file, as well as - `README-lineno.txt' and `README-ncctools.txt'. Usually, the LaTeX - Project Public License applies, a recent version of which can be - found on - - http://www.latex-project.org/lppl.txt - - Any REDISTRIBUTION of `ednotes.sty' must contain the file `README'. - - If you DISTRIBUTE `manyfoot.sty' and `nccfoots.sty', they must be - accompanied by `manyfoot.dtx', `nccfoots.dtx', and - `README-ncctools.txt'. - -INSTALLATION of `ednotes': - - For enabling yourself to make use of all the options that - `ednotes' provides, download - - edcntwd0.sty - ednmath0.sty - ednotes.sty - edtable.sty - lineno.sty - ltabptch.sty - manyfoot.sty - mfparptc.sty - perpage.sty - nccfoots.sty - vplref.sty - - from - - http://www.ctan.org/tex-archive/macros/latex/contrib/ednotes - - (e.g., cf. `CTAN' in the glossary). Note that clicking on - "entire directory" suffices. - - You then have to make the .sty files listed above "visible" - (see the glossary below) to (La)TeX when it runs your job. - - (You may find out through reading documentations that it partially - depends on your intentions which .sty files actually must be there. - E.g., `ednotes.sty' works already when it is accompanied by - `lineno.sty', `manyfoot.sty', and `nccfoots.sty'.) - -USAGE of `ednotes': - - We recommend not to load (by \usepackage) .sty files other than - `ednotes.sty' (except for "standalone uses" as explained below). - They are handled through `ednotes' package options as explained - in the documentation. - - Sorry, the "user guide" and documentation for `ednotes' is, at - present, scattered over the listed .sty files and over the listed - CTAN folders. Here is just a guide through files and folders to - increase your knowledge step by step: - - 0. Oh, recently some of these explanations have been collected - in ednotes.pdf -- .txt input with .pdf output. - - 1. An overview of `ednotes' has appeared in TUGboat vol. 24. - no. 2; the above `ednotes' directory of CTAN contains an - updated .pdf version `ednotugb.pdf' of it. It demonstrates - through some examples what output certain commands produce. - It also compares `ednotes' with two other (La)TeX packages - for critical edition typesetting. - - 2. Next (or even first) we recommend reading the explanations at - the beginning of `ednotes.sty'. - - 3. You may find references to .sty files from the `ednotes' and - the `lineno' folder for reading about additional details of - usage. - - 4. `lineno.sty' provides commands and options that are very useful - to know for creating critical editions by `ednotes'. You can - read about these commands and options in `lineno.sty'. - Moreover, the explanations from `lineno.sty' can be printed - through `lineno.tex' or `lineno.pdf' obtainable from the above - `ednotes' directory. You find there as well an attempt at a - user's guide for `lineno' -- `ulineno.tex' and `ulineno.pdf'. - The latter is not quite up to date, but it may be helpful - though. -- When you use `ednotes', don't believe what the - `lineno' documentation tells about, e.g., - - \usepackage[edtable]{lineno} - - (such statements address usage of `lineno' without `ednotes'). - Many package options of `ednotes.sty' are just passed to - `lineno.sty', so the `lineno' documentation is `ednotes' - documentation in this respect. - - 5. `manyfoot' is another essential module for making `ednotes' - work, though you may hardly need to know about it, `ednotes' - is a kind of user interface for `manyfoot'. However, you may - inform yourself about offers of `manyfoot' for certain fine - points of critical edition typesetting through `manyfoot.dtx' - or `manyfoot.pdf' -- which you find in - - http://www.ctan.org/tex-archive/macros/latex/contrib/ncctools - - (e.g., cf. `CTAN' in the glossary). There are `nccfoots.dtx' - and `nccfoots.pdf' as well. Indeed you may find functions of - `manyfoot' useful just for your commentary passages. - - 6. `perpage.sty' is mentioned here mainly to allow use of - `manyfoot's `perpage' option. It contains brief explanations. - - 7. `longtable', of course, is explained in `longtable.dtx' and - various guides for LaTeX. - - 8. We have prepared something for listing line numbers for index - terms. We don't take the time to integrate it here -- please - contact us (see below) if you are interested. - -Standalone files: - - Some of the listed .sty files which are our work may be useful - without using `ednotes': - - 1. Whenever you use `manyfoot', you can load `mfparptc.sty' after - `manyfoot.sty' just to modify the behaviour of `manyfoot' in - the way that is explained in `mfparptc.sty'. - - Moreover, there is a file `mfparxsp.sty', made for the - possibility that some `manyfoot' user has used an earlier - version of `mfparxsp.sty' which has become obsolete. - - 2. For extending lineno.sty by packages from here, see - - http://www.ctan.org/tex-archive/macros/latex/contrib/lineno - - (e.g., cf. `CTAN' in the glossary). - - 3. `ltabptch.sty', a patch for `longtable', can be used whenever - `longtable' is used. - - 4. An additional file `lblchng1.sty' deals with page break - oscillations, by code as well as by explanations and - discussion. It can be used entirely independently from - any of the packages mentioned before. - -Contact us: - - We would be happy about your suggestions and (in a way) about your - bug reports. Since documentation is so poor at present, please feel - free to ask us for help if needed. Please contact us via - - http://www.contact-ednotes.sty.de.vu - -Newsletter: - - E.g., you may ask us to take your e-mail address into a mailing - list for reporting `ednotes' changes. - -Lucky typesetting! - -______________________________________________________________________ - -GLOSSARY: - -* `CTAN' - abbreviates `Comprehensive TeX Archive Network', cf., e.g., - - http://www.ctan.org - http://tug.org/ctan.html - - and read about "mirrors" there. You will understand that you - may replace `www.ctan.org/tex-archive' by `www.dante.de/CTAN' - (e.g.) in the above-mentioned URL. (But dante doesn't offer - the "entire directory" function.) - - -* visible to (La)TeX - - -- see the file `visible.txt' in the above `ednotes' directory. - -[END of READMORE.txt]_________________________________________________ - diff --git a/Master/texmf-dist/doc/latex/ednotes/ednotes.pdf b/Master/texmf-dist/doc/latex/ednotes/ednotes.pdf Binary files differdeleted file mode 100644 index 4bfb5a8fb8f..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/ednotes.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/ednotes/ednotes.tex b/Master/texmf-dist/doc/latex/ednotes/ednotes.tex deleted file mode 100644 index 7b42c6a0079..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/ednotes.tex +++ /dev/null @@ -1,118 +0,0 @@ -%% Ednotes.tex -- -\title{\LARGE \bf \textit{ednotes.sty} \\ - for critical editions with \LaTeX \\[1ex] - \normalfont \Large - Lazy \texttt{ASCII}$\to$\texttt{PDF} listings} -\author{Uwe L\"uck}%%%\thanks{advised by Christian Tapp.}} -\documentclass[10pt]{article} -\usepackage{verbatim} -\pagestyle{headings} -\newcommand*{\cs}[1]{\texttt{\char"5C #1}} -\newcommand*{\lcurl}[1]{\[\texttt{CTAN:/macros/latex/contrib/#1}\]} -\begin{document} -\maketitle -\section*{Preface} - -\texttt{ednotes[.sty]} is a macro package or bundle of -macro files for scholarly critical editions---typed -by U.\,L.\footnote{$\dots$ originally under the direction of -Christian Tapp at a research project granted by the -Deutsche Forschungsgemeinschaft (DFG).} -It is little more than a user interface for combining -Stephan~I.\ B\"ottcher's \texttt{lineno.sty} and -Alexander~I.~Rozhenko's \texttt{manyfoot}. - -Recent CTAN policy urges to upload \texttt{PDF} -documentation accompanying \TeX\ macro files. -% such files -% do exist for the underlying \texttt{lineno.sty}--- -% \lcurl{lineno.pdf} -% (plus a supplementary \texttt{lnosuppl.pdf} there)---and -% as -% \lcurl{manyfoot.pdf} -% plus -% \lcurl{nccfoots.pdf} -% for the underlying \texttt{manyfoot.sty}\,. -% -% $\dots$ well, -Sorry, a documentation of this kind doesn't exist -at present for \texttt{ednotes} $\dots$---I am just offering -some ersatz \texttt{PDF} documentation: listings of the -\texttt{.sty} files belonging to the \texttt{ednotes} bundle, -structured and navigatable through a table of contents. - -For making use of the options that \texttt{ednotes.sty} -provides, it is vital to know the underlying -\texttt{lineno.sty}---and its documentation. -\texttt{ednotes} just passes \texttt{lineno} commands and -options to the latter. So please notice -\lcurl{lineno/lineno.pdf} -as well as (if you need it) -\lcurl{lineno/lnosuppl.pdf\,.} -In the same directory, there are other macro files that -\texttt{ednotes.sty} may need and whose documentation may -be contained in \texttt{lnosuppl.pdf} (in the same -pseudo-\texttt{PDF}-style as present). - -% Sorry, I haven't had the time for making a proper \texttt{PDF} -% documentation for the present \texttt{ednotes} bundle. -% What I am offering is nothing but a somewhat structured listing -% of the additional \texttt{.txt} and \texttt{.sty} files, -% deriving from the \texttt{verbatim} package and its -% \cs{verbatiminput} command. I hope that the high quality -% (scalable) output is worth it. - -Please don't overlook that \lcurl{lineno/ednotugb.pdf} contains -a (printable) \emph{overview} on the facilities of -\texttt{ednotes}, as well as a comparison with Peter Wilson's -alternative \texttt{ledmac}. - -% \clearpage -\tableofcontents - -\section{The \texttt{.txt} files} -\subsection{First encounter with \texttt{ednotes} on CTAN: - \texttt{README}} -\verbatiminput{README} -\subsection{Adding on installing etc.: \texttt{READMORE.txt}} -This is an extended "README" version -for learning how to complete your download. -\verbatiminput{READMORE.txt} -\subsection{What has changed since your earlier downloads: - \texttt{CHANGES.txt}} -\dots\ lists changes the bundle underwent in a chronolical order. -\verbatiminput{CHANGES.txt} -\subsection{Advice for installation: \texttt{visible.txt}} -Some very down-to-earth advices for real \TeX-newbies: -\verbatiminput{visible.txt} -\subsection{Really recent? \texttt{CHANGING.txt}} -You might consider whether the snapshot (TeXLive most notably) -of the \texttt{ednotes} bundle that you have received most -recently displays the most recent (and perfect) state of it. -\verbatiminput{CHANGING.txt} - -\section{The main file: \texttt{ednotes.sty}} -\verbatiminput{ednotes.sty} - -\section{Supplementary macro files} -\subsection{Tracking page break oscillations: - \texttt{lblchng1.sty}} -\verbatiminput{lblchng1.sty} -\subsection{A lemma repeated in a line: \texttt{edcntwd0.sty}} -\verbatiminput{edcntwd0.sty} -\subsection{Some \texttt{para}-footnote hack: \texttt{mfparptc.sty}} -This deals with a problem that still needs much thinking \dots -\par -\verbatiminput{mfparptc.sty} -\subsection{A reminder of obsoleteness: \texttt{mfparxsp.sty}} -This file just tells that some earlier facility dealing with -vertical spacing has been superseded by \texttt{manyfoot}'s -more recent \cs{ExtraParaSkip}\,. -\verbatiminput{mfparxsp.sty} - -\section{\texttt{varnrule.tex}---customizing footnote rules} -\verbatiminput{varnrule.tex} - -\end{document} - -end of Ednotes.tex diff --git a/Master/texmf-dist/doc/latex/ednotes/ednotugb.pdf b/Master/texmf-dist/doc/latex/ednotes/ednotugb.pdf Binary files differdeleted file mode 100644 index 666e0581245..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/ednotugb.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/ednotes/emathtst.tex b/Master/texmf-dist/doc/latex/ednotes/emathtst.tex deleted file mode 100644 index 527d3602955..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/emathtst.tex +++ /dev/null @@ -1,53 +0,0 @@ -%% EMathTst.tex for demonstrating EdnMath0.sty. -%% Uwe L"uck, http://www.contact-ednotes.sty.de.vu, 2005/01/16. -\documentclass[12pt]{article} -\def\Anote#1#2{#1} \let\<\relax \let\>\relax -% \usepackage{ednotes} -\usepackage[mathrefs]{lineno} - -\begin{document} - -\begin{linenumbers} -% \begin{NoNotesToMath} -\linenumberdisplaymath -\noindent -\texttt{\string\ \unskip linelabel} and -\texttt{\string\ \unskip Anote} in math mode? -\begin{linenomath} -$$ -% \begin{displaymath} -% \begin{equation} -x=\Anote{z}{$Z$} -% {\makeatletter \typeout{\meaning\@EN@lemmatag}} -\linelabel{Hm} -% \end{equation} -% \end{displaymath} -$$ -\end{linenomath} -% \end{NoNotesToMath} -$a=\Anote{x\<y\>z}{$b$} -% {\makeatletter \typeout{\meaning\@EN@lemmatag}} -\linelabel{Hmm} -$. -Why not? -\begin{NoNotesToMath} -Line No.~\ref{Hm}. -\Anote{No \<math\> here.}{Went wrong earlier.} -% {\makeatletter \typeout{\meaning\@EN@lemmatag}} -\end{NoNotesToMath} -Line No.~\ref{Hmm}. -\end{linenumbers} - -% \tracingonline=1 -% \showboxdepth=1 -% \showboxbreadth=30 -% \showlists - -% % These really get lost: -% \linenumbers -% \mbox{\Anote{Boxed}{where?}.\linelabel{Hu}} -% Line No.~\ref{Hu}. - -\end{document} - - diff --git a/Master/texmf-dist/doc/latex/ednotes/varnrule.tex b/Master/texmf-dist/doc/latex/ednotes/varnrule.tex deleted file mode 100644 index 4e2d203314e..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/varnrule.tex +++ /dev/null @@ -1,111 +0,0 @@ -%% varnrule.tex -- demo for varying footnote rules with -%% ednotes.sty (manyfoot feature now supported by ednotes -%% -- search ednotes.sty for `Customizing *footnote rules*'). -%% Uwe Lueck http://contact-ednotes.sty.de.vu 2006/07/06 - -%% Present task: Sergei Mariev wants to use ordinary (numbered) -% footnotes as well as critical apparatuses. An ordinal footnote -% rule should separate the main text from the footnotes in any -% case. The additional footnotes should be separated by usual -% footnote rules as well. However, there shouldn't be a rule -% between the ordinary numbered footnotes and the remaining -% ones. -% -\documentclass[12pt]{article} - -% Below \endinput here, there is a sample for experiencing the -% manyfoot feature without ednotes ...: -% -%%%% \iffalse %% To switch to the mere manyfoot sample -- needs -%%%% %% removing percent signs preceding corresponding -%%%% %% \fi as well! - -\newcommand{\SelectAnoteRule}{[1]{no}} -\newcommand{\SelectBnoteRule}{[0]{default}} -% <- Priorities 1 and 0 will be overridden by priority 2 -% of the Standard LateX footnote rule, -% so there will be a footnote rule between main text and the -% footnotes in any case. Priority 1 above ensures that -% there will never be a visible rule between ordinary footnotes -% and the new A/B/C footnotes handled by manyfoot. -% `no' corresponds to \newcommand{\nofootnoterule} below; -% `default' refers to the standard footnote rule as stored -% by manyfoot. -% -- \newcommand{\Select... must come before loading ednotes. - -\usepackage[Bpara,Cpara]{ednotes} - -\renewcommand{\footnoterulepriority}{2} -% <- setting default priority, especially for the ordinary LaTeX -% footnotes. This priority is the maximal one here and thus -% overrides all the remaining ones. So there will be a rule -% between main text and the footnotes in any case. -% -- The previous line must come /after/ loading ednotes. - -\newcommand{\nofootnoterule}{} -% <- or \let\nofootnoterule\empty; or call it \emptyfootnoterule. -% If so, use `empty' instead of `no' above. -% -- This line may come anywhere before the first page -% is output. - -\begin{document} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -\linenumbers - -%% Remove or add some percent signs for playing: -Some text.\footnote{Ordinary footnote.} -% \Anote{A lemma.}{A note.} -\Bnote{B lemma.}{B note.} -\Cnote{C lemma.}{C note.} - -\end{document} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - -Code demonstrating manyfoot's feature of customized footnote rules: - -%%%% \fi - -\nofiles - -\usepackage[para,ruled]{manyfoot} -% <- I wasn't able to get the below -- much wanted -- results -% without the `ruled' option -- may someone do better!? - -\renewcommand{\footnoterulepriority}{2} -% <- setting default priority, especially for the ordinary LaTeX -% footnotes. This priority is the maximal one here and thus -% overrides all the remaining ones. So there will be a rule -% between main text and the footnotes in any case. - -\newcommand{\nofootnoterule}{} -% <- or \let\nofootnoterule\empty; or call it \emptyfootnoterule. -% If so, use `empty' instead of `no' below. - -\SelectFootnoteRule[1]{no} -\newfootnote[para]{A} -% <- Priorities 1 here and 0 below will be overridden by priority -% 2 of the Standard LateX footnote rule, -% so there will be a footnote rule between main text and the -% footnotes in any case. Priority 1 just above ensures that -% there will never be a visible rule between ordinary footnotes -% and the new ("level") footnotes handled by manyfoot. - -\SelectFootnoteRule[0]{default} -% <- `default' refers to the standard footnote rule as stored -% by manyfoot. -\newfootnote[para]{B} -\newfootnote[para]{C} -% <- Notes in A, B, C will be separated by rules in the usual way. - -\begin{document} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -%% Remove or add some percent signs for playing: -Some text.\footnote{Ordinary footnote.}% -% \FootnotetextA{}{A}% -\FootnotetextB{}{B}% -\FootnotetextC{}{C} - -\end{document} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -End of varnrule.tex - diff --git a/Master/texmf-dist/doc/latex/ednotes/visible.txt b/Master/texmf-dist/doc/latex/ednotes/visible.txt deleted file mode 100644 index f648cef7611..00000000000 --- a/Master/texmf-dist/doc/latex/ednotes/visible.txt +++ /dev/null @@ -1,108 +0,0 @@ -VISIBLE -- Advice for placing new LaTeX files. - -Author: Uwe L"uck, http://www.contact-ednotes.sty.de.vu, -2004/10/18, updated 2008/04/02; -aided by Karl Berry. - ---derived from a TUGboat (vol. 24) article on Ednotes. - - -Once there was a *problem* with placing new LaTeX files -- -many people use MiKTeX nowadays which usually makes getting -and installing packages quite easy. See http://www.miktex.org, -or - - http://www.tex.ac.uk/cgi-bin/texfaq2html?label=inst-miktex - -which also gives some hints in case you even have problems with -MiKTeX. Don't read on this file if you are happy with this/ -with MiKTeX. - - -* The problem: * - -E.g., a user downloads a LaTeX file from CTAN. Or: often there -is a pair of a .dtx and an .ins file for producing a .sty file. -("Run LaTeX on the .ins file ..." This may be difficult enough, -but we assume now that the user manages this.) Typically the -user is told to put the (.sty) file to a folder "where LaTeX -can find it", or "visible to TeX". Indeed, the user cannot use -the file otherwise. However, some users have had no idea how to -arrange things so that (La)TeX finds the file. - -Unfortunately, the procedure for this is somewhat non-trivial -indeed. It depends very much on the user's LaTeX installation, -so it is difficult to indicate a procedure that helps everyone. - - -* Principles for solutions: * - -Technically, the searching agent is the TeX program, not LaTeX ---we choose our wordings accordingly here. LaTeX is rather a -kind of input ("format") to the TeX program. (If this doesn't -make sense to you, don't worry about it.) - -I think of three kinds of approaches: - -1. Put the file into the folder where the files you are editing -are (call them "job files" here). This is easy; but if the user -wants to use the file for another project pursued in a different -folder, the approach would require another copy of the file--or -a link! Therefore, it has been common to place macro (.sty) or -similar files in folders that TeX searches independent of the -folder containing the job files. - -2. Put the file into a folder that TeX has searched so far. - -3. Put the file anywhere (or into an extra folder newly created -with care)--and extend the set of folders that TeX searches -accordingly. The TeX installation ("shell") usually offers a -facility for this--which unfortunately is not always known to -the user. - - -* Advice from TeX Users Groups: * - -I recommend to study the following web pages: - - http://tug.ctan.org/installationadvice - - http://www.tex.ac.uk/cgi-bin/texfaq2html?label=inst-wlcf - -These prefer approach 3 of the above, especially the TDS -standard of arranging folders, see - - http://www.tex.ac.uk/cgi-bin/texfaq2html?label=tds - - -* Easy tricks that I prefer: * - -I must confess that I have never worked with the shells that are -chosen as examples on these web pages. Moreover, some Windows -users may find the examples little helpful. So my personal hints -use approach 2 of the above. - -o Typically, the file is from CTAN folder - /tex-archive/macros/latex/contrib/, and you find a folder - .../latex/contrib/ in the installation at your workplace. - Then the latter should be a good guess for placing the new - file. - -o You may find a folder .../texinput/ (or TeXinput!?) which - should be another good guess. - -o Search your installation for files with the same file name - extension (usually `.sty'), try their folder. - -(Updates are a special case of the last idea, of course.) - - -Ok, if all this doesn't help, you may ask at comp.text.tex -or your local TeX guru, or send an email to texhax -- see - - http://tug.org/mailman/listinfo/texhax - - -Good luck! - - diff --git a/Master/texmf-dist/tex/latex/ednotes/edcntwd0.sty b/Master/texmf-dist/tex/latex/ednotes/edcntwd0.sty deleted file mode 100644 index 1d20e3a84f5..00000000000 --- a/Master/texmf-dist/tex/latex/ednotes/edcntwd0.sty +++ /dev/null @@ -1,368 +0,0 @@ -%% EdCntWd0.sty--count word occurrences with ednotes.sty. -\def\fileversion{0.32d} \def\filedate{2006/07/06} %% TODO - -%% Copyright (C) 2004 Uwe L\"uck & Christian Tapp (direction) -%% 2005 2006 Uwe L\"uck. -%% Munich, http://www.contact-ednotes.sty.de.vu. -%% Current maintainer is Uwe L\"uck. - -%% This program can be redistributed and/or modified under the terms -%% of the LaTeX Project Public License distributed from CTAN -%% archives in directory macros/latex/base/lppl.txt; either -%% version 1.3c of the License, or any later version. -%% We did our best to help you, but there is NO WARRANTY. - -%% * USAGE: * -%% -% 1.) The present file is loaded by the `countoccurrences' package -% option of version v0.8 (onwards) of `ednotes.sty'. -%% -% 2.) If your source code somewhere contains -% <WORD><TEXT>\Anote{<WORD>}{<NOTE>} -% and produces some -% <WORD><TEXT><WORD> -% in *one* printed line, the lemma preceding the note should indicate -% that the note is concerned with the *second* occurrence of <WORD>. -% It would be extremly tedious to implement this requirement in a -% LaTeX macro package. The present package does some part of it. -% If you are, in typing, not sure that the first and second -% occurrence of <WORD> will be printed in different lines, type -% \countword{<WORD>}<TEXT>\Anote{\countword{<WORD>}}{<NOTE>} -% The macro \countword will then check whether the occurrences of -% <WORD> are printed in the same line, and if this happens, the lemma -% preceding the note will have an index `2'. The analogous thing -% <WORD><TEXT><WORD><MORE>\Anote{<WORD>}{<NOTE>} -% works as well (resulting in an index `3'), and so on. -% -% (So the macros do not save you from looking for earlier word -% occurrences, but at least from counting occurrences in the printed -% lines, and you do not have to repeat the procedure when you -% change the width of the printed text.) -% -% Of course, you only have to look for earlier occurrences in the -% same paragraph. -%% -% 3.) Sometimes <WORD> may contain tokens which must not appear in -% label names, e.g., `r\^ole'. In this case, e.g., \countword{r\^ole} -% will break. Then type, e.g., \countword[role]{r\^ole} instead. -% To be more precise: If <WORD> expands to something containing -% a token which is no character token, type -% \countword[<SUBST>]{<WORD>} instead, where <SUBST> expands to -% nothing but character tokens. (Cf. \csname on p. 203 of TeXbook.) -% 4.) Customization: Index numbers appear as subscripts by default. -% To change this, type -% \renewcommand{\CWtextscript}{\textsuperscript} -% or \let\CWtextscript\textsuperscript . -% 5.) Pagewise/running line numbering: Switching from pagewise to -% running line numbering needs an extra run or deletion of -% \jobname.aux. So don't be frightened by an error message. - -%% Please send comments via http://www.contact-ednotes.sty.de.vu. - -%% For wizards: changes lineno.sty's \linenumberpar. - -\NeedsTeXFormat{LaTeX2e}[1994/12/01] -%% <- \newcommand*, \providecommand* -\ProvidesPackage{edcntwd0}[\filedate\space\fileversion\space - ^^JCounting word occurrences with - ednotes.sty (ul)] - -%% * IMPLEMENTATION: * %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% -%% * Main ideas: * -% \countword occurrences write their order (per paragraph) and line -% numbers into the .aux-file. With these informations from the -% latter, a table is created which assigns line and place -% numbers to words. A second table re-orders the first one and -% assigns an index to each place number. An index of 0 means that the -% corresponding word appears only once in a line. A higher index -% tells the order in which an occurrence follows others in the line. -% When processed for the lemma tag, \countword realizes its place -% number and, using this, reads the index from the former table and -% prints or does not print an index accordingly. - -% \RequirePackage{ednotes}[2004/01/04] -%% Does this work for mere version checking? -%% No--had the problem with edtable. See LaTeX bug latex/3730. - -% Auxiliaries: -\def\@CW@stepcnt#1{\advance#1\@ne} -\def\@CW@emptylist{\@eltt} %% Need bound for table rows. -% \newif\if@CW@firstinpar \global\@CW@firstinpartrue %% ! - -% \c@CW@par identifies paragraphs which contain \countword. -% From v0.32a onwards, it is kind of a LaTeX counter in order -% to work properly with \includeonly: -\newcount\c@CW@par -\@addtoreset{CW@par}{@ckpt} - -% \@CW@wordlist is made a list of \countword-arguments in one -% paragraph, to be written to the .aux . -\global\let\@CW@wordlist\@empty - -% At the first occurrence of \countword in a paragraph, -% \@CW@makeplaceindex reads the corresponding \@CW@wordlist -% and transforms it into \@CW@wordlinelist -- if it has been -% written in the previous run. Whether the latter is the case -% is recorded by \if@CW@pardef. -\global\let\@CW@make@placindexlist\@CW@makeplaceindexlist -\newif\if@CW@pardef \global\@CW@pardeffalse -\global\let\@CW@wordlinelist\@CW@emptylist -% When there is evidence that there are more occurrences of -% \countword than in the previous run: -\def\@CW@missingdata{\G@refundefinedtrue - \@EN@warning{Missing data (.aux) for - \string\countword\MessageBreak}% -%Package ednotes Warning: Missing data (.aux) for \countword -%on inputline - \CWtextscript?} -%% <- TODO: warning when some \countword has been removed!? - -\def\@CW@makeplaceindexlist{% - \global\let\@CW@make@placeindexlist\relax - \stepcounter{CW@par}% % v0.32a -% \global\@CW@stepcnt\c@CW@par - \@ifundefined{CWp\romannumeral\c@CW@par}% -% {\G@refundefinedtrue \global\@CW@pardeffalse}% - {\global\@CW@pardeffalse}% - {% - \global\@CW@pardeftrue -% \global\let\@CW@wordlinelist\@CW@emptylist -%% \@CW@wordlinelist is built as a "table", each row being -%% <WORD>\@elt<LINENO>\@elt<PLACENO>\@eltt -%% --and there is an extra leading \@eltt. -%% Latter needed for determining exact matching. -% \global\let\@CW@placeindexlist\@CW@emptylist - \begingroup - \count@\z@ \let\@elt\relax \let\@eltt\relax - \edef\@tempa{\noexpand\@tfor \noexpand\@tempa :=% - \csname CWp\romannumeral\c@CW@par\endcsname}% - \@tempa\do{% - \@CW@stepcnt\count@ - \edef\@tempc{r@CWw@\number\c@CW@par @\number\count@}% -%% 2004/07/27: hack for pagewise line numbering: - \expandafter \@ifundefined \expandafter{\@tempc}% - {\gdef\@gtempa{?}}%% \global: cf. below! - {\ifx\c@linenumber\c@runninglinenumber - \gdef\@gtempa{% - \expandafter\expandafter\expandafter \@car -%% Beware hyperref. - \csname\@tempc\endcsname \@nil}% - \else - \begingroup - \def\thelinenumber{% - \xdef\@gtempa{\number\c@linenumber}}% -%% Assumes \getpagewisenumber -> {... \thelinenumber} -%% Local vs. global assignments to \c@linenumber OK according to -%% Stephan. (!?) - \expandafter\expandafter\expandafter \@car - \csname\@tempc\endcsname \@nil - \endgroup - \fi}% -% \typeout{G:\meaning\@gtempa}% TEST - \edef\@tempb{% - \noexpand\g@addto@macro \noexpand\@CW@wordlinelist{% - \@tempa \@elt - \@gtempa -% \expandafter \@ifundefined \expandafter{\@tempc}{?}% -% {\expandafter\expandafter\expandafter \@car -% \csname\@tempc\endcsname \@nil}% - \@elt - \number\count@ \@eltt}}% - \@tempb}% -%% TODO: empty referring macros after use -> ednotes as well. - \xdef\@CW@numberofwords{\number\count@}% -%% \@CW@wordlinelist next is transformed into \@CW@placeindexlist: - \loop -% \typeout{WL=\meaning\@CW@wordlinelist}%% TEST - \ifx\@CW@wordlinelist\@CW@emptylist \else - \global\let\@CW@nextwordlinelist\@empty - \expandafter\@CW@takerow\@CW@wordlinelist\@nil - \ifx\@CW@nextwordlinelist\@empty - \global\let\@CW@wordlinelist\@CW@emptylist - \else - \global\let\@CW@wordlinelist\@CW@nextwordlinelist - \fi - \repeat - \endgroup - }% -% \typeout{PI=\meaning\@CW@placeindexlist}%% TEST -% \global\let\countword\@CW@cntwii -% \@CW@cntwii -} -%% \@CW@placeindexlist has, after starting \@eltt, rows of form -%% <PLACE>\@elt<INDEX>\@eltt . -\global\let\@CW@placeindexlist\@CW@emptylist - -\def\@CW@takerow\@eltt#1\@elt#2\@elt#3\@eltt#4\@nil{% - \count@\@ne - \g@addto@macro\@CW@placeindexlist{#3\@elt}% -%% \@CW@placeindexlist always closes with mostly spurios -%% 0\@eltt, don't know why, but harmless for reading the list. - \def\@CW@matchline##1\@eltt#1\@elt#2\@elt##2\@eltt##3\@nil{% -% \typeout{WL=\meaning\@CW@wordlinelist}%% TEST - \def\@tempa{##1}% -% \typeout{##1}%% TEST - \ifx\@tempa\@CW@emptylist - \g@addto@macro\@CW@placeindexlist{0\@eltt}% - \else - %% \@tempcnta determines one out of four cases, - %% while \count@ counts equal words in a line: - \@tempcnta \ifnum\count@=\@ne \z@ \else \tw@ \fi - \ifx\@nnil##2\@nnil %% No match. - \let\@CW@next\relax - \else %% Match. - \@CW@stepcnt\@tempcnta \@CW@stepcnt\count@ - \@CW@buildnextwordlinelist{##1}% - \def\@CW@next{\@CW@matchline\@eltt##3\@nil}% - \fi - %% Cases determined. -% \typeout{\number\@tempcnta}%% TEST - \ifcase\@tempcnta %% \typeout{Case 0: \count@=1, no match}% - \g@addto@macro\@CW@placeindexlist{0\@eltt}% - \xdef\@CW@nextwordlinelist{\@eltt#4}% - \or %% \typeout{Case 1: \count@=1, match}% - \g@addto@macro\@CW@placeindexlist{1\@eltt##2\@elt2\@eltt}% - \or %% \typeout{Case 2: \count@>1, no match}% - \@CW@buildnextwordlinelist{##1}% - \or %% \typeout{Case 3: \count@>1, match}% - \edef\@tempc{\noexpand\g@addto@macro \noexpand\@CW@placeindexlist - {##2\@elt \number\count@ \@eltt}}% - \@tempc - \fi - \@CW@next - \fi - }% - \@CW@matchline\@eltt#4\@eltt#1\@elt#2\@elt\@eltt\@nil - %% TODO #4 void!? Cf. dummy above, \@CW@next. -} -%% \@CW@buildnextwordlinelist{#1} appends non-void #1 to -%% \@CW@nextwordlinelist: -\def\@CW@buildnextwordlinelist#1{% - \ifx\@nnil#1\@nnil \else - \g@addto@macro\@CW@nextwordlinelist{\@eltt#1}\fi} - -% \c@CW@repword counts occurrences of \countword in a paragraph: -\newcount\c@CW@repword - -\newcommand*\countword[2][\@nil]{% -% \newcommand*\@CW@cntwii[2][\@nil]{% -% \global\@CW@firstinparfalse - \@CW@make@placeindexlist - \global\@CW@stepcnt\c@CW@repword - \def\@tempa{#1}% - \ifx\@tempa\@nnil - \g@addto@macro\@CW@wordlist{{#2}}% - \else - \g@addto@macro\@CW@wordlist{{#1}}% - \fi - \edef\@tempa{\noexpand\linelabel{% - CWw@\number\c@CW@par @\number\c@CW@repword}}% - \@tempa - #2} - -% \@ifdefinable\countword{\global\let\countword\@CW@cntwi} - -% In the lemma tag of the note, \countword behaves as follows. -\addlemmaexpands{\let\countword\@CW@cntwl - \global\c@CW@nrepword\c@CW@repword} -\newcount\c@CW@nrepword - -\newcommand*\@CW@cntwl[2][]{%% First argument just gobbled, -%% using place number instead. - #2% - \@CW@make@placeindexlist - \if@CW@pardef - \global\@CW@stepcnt\c@CW@nrepword - \ifnum\c@CW@repword>\@CW@numberofwords\relax - \@CW@missingdata - \else - \edef\@tempc{% - \def\noexpand\@tempb####1\noexpand\@eltt - \number\c@CW@nrepword}% - %% "look up". - \@tempc \@elt##2\@eltt##3\@nil{\def\@tempa{##2}}% - \expandafter\@tempb \@CW@placeindexlist \@nil - \if 0\@tempa \else -% \CWtextscript{\if ?\@tempa ?\else \@tempa \fi}% - \if ?\@tempa \@CW@missingdata - \else \CWtextscript\@tempa \fi - \fi - \fi - \else -%% \if@CW@pardef and the question marks could have been given up, -%% since there is already the `undefined references' warning. -% \if@CW@firstinpar \CWtextscript 1\else \CWtextscript ?\fi -% \CWtextscript?% - \@CW@missingdata - \fi} -\providecommand*\textsubscript[1]{% -%% Cf. LaTeX \textsuperscript: we will be in a note here! - $\m@th_{\mbox{\fontsize\sf@size\z@\selectfont#1}}$} -\let\CWtextscript\textsubscript -\def\@EN@CWhook{\setbox\z@\hbox} %% To recognize stepping counters. - -%% TODO: empty referring macros after use. -> ednotes as well. - -% \CWClosePar writes \@CW@wordlist to the .aux-file and -% resets the lists and \if@CWpardef: -\newcommand*\CWClosePar{% %% TODO: -> doc.!? Useful? - \ifx\@CW@wordlist\@empty \else -% \immediate\write\@mainaux{% - \immediate\write\@auxout{%% for \includeonly - \gdef\expandafter\noexpand - \csname CWp\romannumeral\c@CW@par\endcsname - {\@CW@wordlist}}% - \global\let\@CW@wordlist\@empty - \global\c@CW@repword\z@ - \fi -% \global\let\countword\@CW@cntwi - \global\let\@CW@placeindexlist\@CW@emptylist - \global\let\@CW@make@placeindexlist\@CW@makeplaceindexlist - \global\let\@CW@wordlinelist\@CW@emptylist - \global\let\@CW@nextwordlinelist\@empty -% \global\@CW@firstinpartrue - \global\@CW@pardeffalse} -\expandafter\def\expandafter\linenumberpar\expandafter{% - \expandafter\CWClosePar\linenumberpar} - -\endinput - -VERSION HISTORY: -v0.01 2004/01/05 Very first release under name `ecntw0.sty'. -v0.1 2004/01/05 Changed names and documentation, new name - `edcntwd0.sty'. -v0.11 2004/01/05 renamed \CWnext -> \@CW@next, added main ideas of - implementation. -v0.12 2004/05/12 Added remark on `linenox1.sty' (load earlier); - added `(C)' and Christian for copyright; - L"uck -> L\"uck. \RequirePackage{ednotes}; - changed doc. accordingly. - 2004/07/06 Added explanation for order with `linenox1.sty' - ("for wizards"). - 2004/07/28 ^^J; cope with pagewise numbering; note on - switching from pagewise to running. -v0.12b .../08/31 Changed to LPPL v1.3, added maintenance. -v0.2 2004/09/20 Removed mentions of `linenox1.sty', for - `lineno.sty' v4... -v0.3 2004/10/07 Usage: to be loaded by `ednotes.sty' option. - 2004/10/11 Removed \RequirePackage{ednotes}; changed some - TODOs. - 2004/10/12 latex/3730. -v0.3a 2004/11/07 LPPL v1.3a. -v0.3b 2005/01/10 Contact via http. -v0.31 2005/02/20 Added \@EN@first. - 2005/03/08 Added Copyright 2005. -v0.32 2005/05/01 Replaced \@EN@first by LaTeX's \@car. - [sent to CTAN, contrary to final line!] - 2006/02/25 Typo fix `USAGE' 5. - 2006/05/01 \if@CW@firstinpar to avoid spurious `?'. - [given to Lekhtman] -v0.32a /06/07 \c@CW@par with \includeonly. - 2006/06/15 replaced \if@CW@firstinpar by - \@CW@make@placeindexlist etc.; - extended documentation; rearranged code. - 2006/06/16 \@CW@missingdata. -v0.32b /06/26 LPPL v1.3c. - /06/29 `Missing data (.aux)' -v0.32c /07/06 \includeonly with less LaTeX counter features. diff --git a/Master/texmf-dist/tex/latex/ednotes/ednotes.sty b/Master/texmf-dist/tex/latex/ednotes/ednotes.sty deleted file mode 100644 index 9168f7c0f53..00000000000 --- a/Master/texmf-dist/tex/latex/ednotes/ednotes.sty +++ /dev/null @@ -1,1553 +0,0 @@ -%% Macro package `ednotes.sty' for LaTeX2e, -%% copyright (C) 2002--2005 Uwe L\"uck & Christian Tapp (direction) -%% 2006 Uwe L\"uck -%% http://www.contact-ednotes.sty.de.vu -%% --author-maintained, for critical editions -%% (varying J. Lavagnino's and D. Wujastyk's EDMAC). -%% -\def\fileversion{1.3a} \def\filedate{2006/10/05} %% TODO -% -%% This file can be redistributed and/or modified under -%% the terms of the LaTeX Project Public License; either -%% version 1.3c of the License, or any later version. -%% The latest version of this license is in -%% -%% http://www.latex-project.org/lppl.txt -%% -%% We did our best to help you, but there is NO WARRANTY. -%% -%% Please report bugs, problems, and suggestions via -%% -%% http://www.contact-ednotes.sty.de.vu -% -%% * USAGE: * -% -% *Overview:* -% This package provides facilities for notes in (critical) editions. -% `\Anote{LEMMA}{NOTE}' prints NOTE in an extra footnote apparatus, -% referring to LEMMA by its line numbers (as generated by -% `lineno.sty') and by repeating LEMMA in the note. By calling the -% package with extra options, you can add \Bnote etc. and choose -% whether notes of one apparatus appear in a single paragraph on -% each page or in separate paragraphs (`manyfoot.sty'). -% In LEMMA, `...\<...\>...' indicates what short version of it is to -% appear in the note. There are further facilities to customize -% appearance of notes. -% Commands \Anotelabel{LABEL}, \donote{LABEL}{NOTE} etc. vary \Anote -% etc. in admitting overlapping lemmas. -% ---The package is made for those who need something like EDMAC -% but who want to employ LaTeX2e at the same time. -% More detailed description below is divided into -% `packages required', `user commands', `package options', -% `customizing', `Note on EDMAC', and `Comparison with LEDMAC'. -% -% *Note on "rival" package LEDMAC:* Peter R. Wilson has made a -% LaTeX package LEDMAC (available on CTAN) for about the same -% purpose as the present package. See `Note on EDMAC' and -% `Comparison with LEDMAC' below. -% -% *Printed presentation:* An article on `ednotes' with user -% instructions, examples, and comparisons with `[L]EDMAC' -% appeared in the TUGboat volume for 2003. A version of it is -% obtainable from the `ednotes' CTAN folder (`ednotugb.pdf'). -% -% *Packages required:* -% This package will not work without the following ones -% ("visible"--cf. visible.txt in CTAN ednotes folder): -% o Packages `manyfoot.sty' (v1.9+) and `nccfoots.sty' by -% Alexander I. Rozhenko from the `ncctools' bundle. -% You needn't know anything about these -% except perhaps options `para' and `para*' -% choosing footnote indentation (see `package options' below). -% o Package `lineno.sty' by Stephan I. B"ottcher. -% We here suppose that you know and employ some of the -% line numbering commands from `lineno.sty'. -% However, please don't load these packages on your own. -% Instead of calling them with some options, put these options -% into the brackets of \usepackage[<options>]{ednotes}. -% -% *Availability:* -% o In case you have not received `manyfoot.sty' and `nccfoots.sty', -% you find them in the CTAN folder -% `macros/latex/contrib/ncctools/unpacked' . -% You find PDF documentations in -% `macros/latex/contrib/ncctools/doc' . -% o `lineno.sty' is in CTAN folder `macros/latex/contrib/lineno'. -% In the same folder, there is `lineno.pdf' for documentation. -% -% *Optional packages:* -% o Some package options may need additional package files (for -% a while). They may be in the `ednotes' or `lineno' CTAN folder. -% The README files there will name them or tell where they are -% named. %% TODO -% -% *Other useful files:* -% Look at the README file in CTAN folder -% `macros/latex/contrib/ednotes' for quick information on what other -% files in the folder provide. %% TODO: indeed? -% -% *User commands:* -% *Basic:* -------------------------------------------------------- -% \Anote{LEMMA}{NOTE} prints LEMMA where it occurs -% and sends NOTE into an extra footnote apparatus. -% The lines where the command occurs must be numbered -% by using commands from package `lineno.sty'. -% In the footnote, NOTE is preceded by line numbers of LEMMA, -% by a version of LEMMA (see below), and by some separating stuff. -% Separating stuff by default is a properly spaced right bracket -% according to \lemmafmt (see below). -% \Anote may be nested in LEMMA. -% (Overlapping lemmas may be generated by \Anotelabel etc. as -% described below.) -% For customizing appearance of notes, see `package options' and -% `customizing' (\lemmafmt and \lemmaellipsis, e.g.) below. -% For additional analogous commands \Bnote etc., see -% `"optional" user commands' below. -% *Short lemma substitute in note:* ------------------------------- -% (The following describes a comfortable extension of -% EDMAC's \lemma.) -% LEMMA argument of \Anote as above may appear as `L1\<L2\>L3', then -% only L1 and L3 appear in the footnote with some ellipsis symbols -% between them. By default, these are \textsymmdots according to -% \lemmaellipsis. -% (For \textsymmdots vs. ordinary \dots see `miscellaneous' below.) -% L2, however, may start with `<ELL>', then ELL is used instead of -% \textsymmdots or whatever else \lemmaellipsis might call. -% (To be sure, symbols `\<', `<', `>', `\>' work in a special way -% in LEMMA. `>' might be used inside ELL if inside braces, e.g., -% `\<<{$>$}>'. <ELL> works as an optional argument of \< like -% brackets usually do in LaTeX---we thought you might use `[' here -% as a symbol to be printed in main text. Care for proper spacing in -% both versions of the lemma by spaces touching \<, \>, and braces. -% ---A special version of the package would be necessary for those -% having no `<', `>' on their keyboards.) -% *Overlapping lemmas:* ------------------------------------------- -% \Anotelabel{LABEL}LEMMA\donote{LABEL}{NOTE} -% works just like \Anote{LEMMA}{NOTE} above. However, by using -% proper LABELs, you can indicate which of overlapping lemmas -% begins and ends where. Note that the second command is only -% \donote, not \Adonote. In LEMMA, \pause{LABEL} and \resume{LABEL} -% act analogously to \< and \> above for lemma substitutes, and -% \pause{LABEL}<ELL> employs your own ELL for the ellipsis. -% LEMMA may contain \Anote and the other way round (in some way). -% However, \pause{LABEL} must not be hidden in braces etc. -% *Commands in lemma as repeated in a note:* ---------------------- -% Some commands should work in main text, but not in the lemma -% text of the note, e.g. \label. With respect to some of them, -% `ednotes.sty' makes an adjustment for this. Nesting of lemmas, -% e.g., is enabled this way. -% For other commands, you can hide code from a note -% by \notinnote, e.g.: \notinnote{\footnote{...}}. -% If you know about relevant (La)TeX internals, you can define -% behaviour of commands in lemmas using \addlemmaexpands, e.g. -% \addlemmaexpands{\let\footnote\@gobble}. -% (However, the latter code is bad if \footnote should occur -% with an optional argument. Moreover, in some cases -% \let...\notinnote may handle spaces better than -% \let...\@gobble, since \notinnote uses a variant of LaTeX's -% \@bsphack and \@esphack. -% ---\addlemmaexpands has only local effect inside group.) -% \showlemmaexpands displays all these extra definitions -% which would apply in the lemma ahead. -% (A lot of commands might be changed here, we chose only few. -% Cf. EDMAC's \no@expands; EDMAC, however, deals with the -% problem in a different way and needs more changes -% than we do.) -% ---You may find -% \IfLemmaTag{<in lemma tag>}{<in main text>} -% useful as well, perhaps more flexible than \notinnote. -% -% *"Optional" user commands:* ------------------------------------- -% Each of \Bnote, \Bnotelabel, \Cnote, \Cnotelabel, \Dnote, -% \Dnotelabel, \Enote, and \Enotelabel is defined by calling -% respective package options `Bpara' or `Bplain' etc., see -% `package options' below. They work like \Anote and \Anotelabel, -% respectively, and nesting and overlapping of their lemmas works -% as for \Anote and \Anotelabel. \donote works with each of -% \Anotelabel, \Bnotelabel etc.---care for different labels. -% \nopunct may help you in case of certain changes of \notefmt, see -% `customizing' below (not active outside notes). -% *Miscellaneous:* ------------------------------------------------ -% As a byproduct, we provide \textsymmdots as an alternative to -% \dots or (more specific) to LaTeX2e's \textellipsis. We feel that, -% in the middle of the short version of a lemma, the text dropped -% should be replaced by symmetrically spaced dots, i.e., in -% L1 ... L3, the space between L1 and the dots should be the same -% as the space between the dots and L3. \textellipsis obstructs this -% by calling a space after the final dot which is not balanced by a -% space before the first dot. \textsymmdots just closes without that -% final space---that's all the difference to \textellipsis. (Cf. -% TeXbook p. 73 where $\ldots$ is recommended for the same purpose.) -% Of course, it is now your job to care for proper spacing on left -% and right, e.g., use it this \textsymmdots\ way. -% Note that with a comma following \dots is quite right while -% `\textsymmdots,' is bad. %% TODO: delimiters!? e.g. [...] -% -- Now (since Sep 2004) indeed there is the `ellipsis' package -% by Peter J. Heslin on CTAN in the /macros/latex/contrib directory! -% It deals with this problem much more thoroughly. -% *Wrong placement:* ---------------------------------------------- -% We do not provide helpful error messages for badly placed \<, -% \pause, and the like in this version. You will just get -% `undefined' errors, complaints about \mskip, or `runaway -% argument' errors.---Doubling labels with \Anotelabel etc. may -% work well if you know what you are doing. -% -% *Package options:* -% 1.) Options `left', `right', `switch', `switch*', `columnwise', -% `pagewise', `running', `modulo', `mathlines', `displaymath', -% `edtable' (edit tabular environments), `longtable' (edit -% `longtable' environments), `nolongtablepatch' are passed to -% package `lineno'; cf. the latter package for information -% (not yet tested all). %% TODO -% `left' and `running' act by default. -% Option `mathnotes' calls `lineno.sty' package option `mathrefs', -% see `lineno' documentation as well. -% 2.) Option `Aplain' arranges all notes for one page generated -% by \Anote and \Anotelabel in a single footnote paragraph. -% Option `Bplain' generates an apparatus using one footnote -% paragraph for each note, with commands \Bnote, and \Bnotelabel. -% Option `Bpara' does the same but arranging all notes -% for one page in a single footnote paragraph. -% Analogues apply to `Cplain', `Cpara', `Dplain', `Dpara', -% `Eplain', and `Epara'. (There is `Apara' as well---default.) -% Option `para*' suppresses indentation of footnote paragraphs -% coming from options like `Apara' (cf. package `manyfoot'). -%% TODO: para indent correct? -% 3.) Option `edmacpara' makes up for problems with `para' -% footnotes that are discussed in `EDMAC.doc' section -% `Paragraphed footnotes'. See our package `mfparptc.sty' for -% details (for the time being). -% 4.) Option `perpage' is just passed to `manyfoot.sty'. -% (This requires that the perpage package has been installed; -% to be obtained from CTAN folder macros/latex/contrib/bigfoot/.) -% 5.) Option `countoccurrences' provides a command \countword -% for a half-way solution of the problem of lemma words that -% occur more than once in a line. See our package `edcntwd0.sty'. -% (With `ednotes.sty' v1.1 you need `edcntwd0.sty' v0.31.) -% -% *Customizing:* -% Appearance of notes is directed by macros \extrafootnoterule, -% \linesfmt etc. occurring in the following lines -% (each starting with \renewcommand). -- More recently, customizing -% footnote rules has been introduced; see below. -% For customizing, copy the respective lines to your own file, -% remove left hand comment mark, and change the definition in the -% right hand pair of braces. (The definition you find there is our -% original one; we hope you understand from these definitions how -% they work in general and what the arguments are. E.g., \linesfmt -% applies to printing of line numbers and, originally, renders them -% bold-faced, followed by \enspace. Note that this default suppresses -% hyphenation of the first word of a lemma tag.) -% This controls identical behaviour in *every apparatus*. -% For changing appearance of a single apparatus without changing -% the remaining, see below.---Note: With v1.1, \ref has been -% removed from the definition of \repeatref, and a \ref in any -% customization of it will not work any longer. As well, earlier -% \linewithpage used \ref and \pageref, and this will not work any -% longer. \linewithpage has been replaced by \pageandline. -% \renewcommand{\extrafootnoterule}{\footnoterule} -% ---This is a `manyfoot.sty' command for separating each extra -% apparatus from the other ones.--- -% \renewcommand*{\sameline}[1]{\linesfmt{#1}} -% \renewcommand*{\differentlines}[2]{\linesfmt{#1--#2}} -% %% TODO: \linesfmt into \@EN@note!? -% \renewcommand*{\linesfmt}[1]{\textbf{#1}\enspace} -% ---E.g., for enabling hyphenation of first word of lemma tag: -% % \renewcommand*{\linesfmt}[1]{\textbf{#1}\enspace -% % \hspace*{0pt}} -% ---Last line works like german.sty's \allowhyphens. -% \renewcommand*{\pageandline}[2]{#1.#2} % #1 page, #2 line. -% \renewcommand{\lemmafmt}[1]{#1\thinspace]\enskip} -% \renewcommand*{\repeatref}[1]{#1} -% ---E.g., for replacing repeated line numbers by non-bold slash: -% % \renewcommand*{\repeatref}[1]{\textnormal{/}} -% \renewcommand{\lemmaellipsis}{\textsymmdots} -% \renewcommand{\notefmt}[1]{#1} -% Note: \notefmt, originally, takes your note just as it is. -% By redefinition -% \renewcommand*{\notefmt}[1]{#1.} -% you might add an automatic closing full stop to each note. -% In a single note of the same apparatus, however, you might then -% want to close by a question mark (e.g.) instead of the fullstop. -% For this purpose, close that note by `?\nopunct'. \nopunct then -% gobbles the full stop waiting ahead. (So much as to \notefmt.) -% ---Customizing a *single apparatus*: -% For changing appearance of the apparatus feeded by \Anote -% without changing remaining apparatuses (feeded by \Bnote etc.), -% take the following lines (the one with a single right brace -% being the last one) to your own file and remove the left hand -% column of comment marks. Remove then left hand comment marks -% of single lines containing commands whose behaviour in the -% apparatus you want to change. Change their definitions in -% right hand braces. (It is quite important never to remove -% right hand comment marks, as you may know!) -% \newcommand{\Anotefmt}{% -% % \renewcommand*{\sameline}[1]{\linesfmt{##1}}% -% % \renewcommand*{\differentlines}[2]{\linesfmt{##1\textendash##2}}% -% % \renewcommand*{\linesfmt}[1]{\textbf{##1}\enspace}% -% % \renewcommand*{\pageandline}[2]{##1.##2}% ##1 page, ##2 line. -% % \renewcommand*{\repeatref}[1]{##1}% E.g., ... -% % % \renewcommand*{\repeatref}[1]{\textnormal{/}}% ... instead. -% % \renewcommand{\lemmafmt}[1]{##1\thinspace]\enskip}% -% % \renewcommand{\lemmaellipsis}{\textsymmdots}% -% % \renewcommand{\notefmt}[1]{##1}% -% } -% For changing the \Bnote apparatus, do the same and change -% \Anotefmt into \Bnotefmt. Analogues apply to \Cnote etc. -% ---You can, moreover, add code in the definition of \Anotefmt etc. -% for additional settings to be active throughout the note -% (including line numbers and lemma reference), -% e.g., for selection of a certain font type. -% ---`manyfoot' v1.9 offers a command \SetFootnoteHook for -% controlling the appearance of the whole paragraph of an apparatus -% in `para' or `para*' style---please see the `manyfoot' -% documentation for examples. `ednotes' v1.2 makes use of this -% through a new command \PrecedeLevelWith{X}{CODE}. E.g., -% \PrecedeLevelWith{A}{\textit{Var.:}} and -% \PrecedeLevelWith{B}{\textit{Sim.:}} (once and for all) -% may distinguish the variant from the similia apparatus. -% CODE may also be used to contol the paragraph indent of -% the apparatus (so the paragraphs may have different -% indents) or to shape the paragraph more generally -% (according to TeXbook chapter 14, especially pp. 101f.). -% To give a general rule, \PrecedeLevelWith{X}{CODE} has -% the same effect as \SetFootnoteHook{CODE} -% \DeclareNewFootnote[para]{X} would have with `manyfoot'. -% Without the `para' option or with the `plain' style of -% notes, CODE just is executed starting each note (preceding -% even the line number and the lemma). -% ---*Special characters:* As is noted in EDMAC's documentation, -% the en-dash for line number printing or the separating right -% square bracket might be coded unusually in some special font -% which has been chosen and so may escape being printed. Should you -% encounter this problem indeed, you can use the previous for remedy -% (e.g., change \lemmafmt). (EDMAC's solution is use of -% \endashchar etc. for taking these characters from the \rm font.) -% ---You may *redefine* most of the commands provided by the -% package. *Exceptions* are \donote, \<, and \>. So you might -% put \newcommand{\variant}{\Anote} or even (for TeXperts) -% \let\variant\Anote into your file (after `ednotes.sty' has been -% read). No problem about nesting will arise (as did with EDMAC). -% EDMAC's suggestion to make <...> a shorthand, however, would -% conflict with our lemma mechanism. (Coexistence would be possible -% by suitable use of braces and repeating present definitions -% after change of <'s catcode.) -% ---Customizing *footnote rules*: From its version 1.5 onwards, -% manyfoot has offered customizing footnote rules, as described -% in section 3 of manyfoot.pdf . Only with version 1.3 onwards, -% our ednotes supports this manyfoot feature. First please note -% that ednotes always simply executes \newfootnote, never -% \DeclareNewFootnote. This seems to suffice for scholarly -% critical editions and for customizing the footnote rules. -% When you read in manyfoot.pdf about customizing footnote -% rules, therefore please disregard any difference between -% \newfootnote and \DeclareNewFootnote.---So please read -% section 3 of manyfoot.pdf . Observe the \SelectFootnoteRule -% commands preceding some \DeclareFootnoteRule commands. -% If such a command precedes \newfootnote{<X>}, ednotes -% produces the same effect if you precede loading ednotes -% after \newcommand{\Select<X>noterule}{<SFR args>}, -% when you would want to use \SelectFootnoteRule<SFR args> -% with mere manyfoot. (The accompanying file varnrule.tex -% explains more and enables you to play with the possibilites.) -% ---(Please never forget to update the ncctools MiKTeX package -% when you update the ednotes package!) -% -% *Your shorthands:* -% \Anote etc. prevent editorial notes from appearing in the -% table of contents when such commands (\Anote etc., i.e.) -% appear in a heading (e.g.). But when you define a shorthand macro -% (using \newcommand) that has an optional parameter and \Anote -% or so in the defining code, something more is needed to have -% the lemma, without the note, in the table of contents (or ...) -% E.g., you might \newcommand*{\variant}[1][A]{\Anote{#2}{#1}} -% so \variant{res} works like \Anote{res}{A} and \variant[B]{res} -% works like \Anote{res}{B}. ednotes v1.22 offers two solutions -% to this problem: -% 1. You can precede your shorthand with \RobustTestOpt whenever it -% appears in a "moving" argument like a chapter heading -- -% \RobustTestOpt\variant{res} as well as -% \RobustTestOpt\variant[B]{res} , e.g. -% 2. You can save yourself from caring for \RobustTestOpt by using -% \NewEdnotesCommand instead of \newcommand -- -% \NewEdnotesCommand*{\variant}[2][A]{\Anote{#2}{#1}} -% These facilities work only when the shorthand has an *optional* -% parameter and at least one *mandatory* parameter -- well, if it -% doesn't have, you can use \RobustTestOpt if you put a pair of -% braces after the shorthand macro name, this would work as well. -% ---You may find -% \IfTypesetting{<for typesetting>}{<for mere expanding>} -% more flexible. -% -% *Known problems:* -% With run-in-paragraph footnotes (options `para' or `para*'), notes -% may end too deep on the page or (with `longtable.sty') even overlap -% with main text. `ednotes.sty' shares this "feature" with EDMAC and -% LEDMAC. Output gets worse as the number of paragraphed-footnote -% series increases. `manyfoot.sty' version 1.7 (!) accounts for this -% by a command \ExtraParaSkip (as an interim solution). This command -% reserves additional vertical space for the notes (so there is less -% space for main text---at the expense of too large empty space on -% some pages). After `ednotes.sty' (or `manyfoot.sty') has been -% loaded (i.e., below \usepackage...), type `\ExtraParaSkip{<skip>}' -% (still in the preamble) where <skip> may be any glue parameter. -% <skip> may be a multiple of any absolute space unit (e.g., `4pt' or -% `2mm'), it may even be a multiple of a space unit depending on the -% font size of notes (\footnotesize)---like `em', `ex', or -% `\normalbaselineskip' (e.g., `.5\normalbaselineskip'). (However, -% stretch and shrink of, e.g., \normalbaselineskip are ignored.) -% Experiment with choices for <skip> such that notes neither overlap -% with main text nor hang too deep on the page. The most safe choice -% is `\ExtraParaSkip{.5\normalbaselineskip}'. -% ---Manyfoot.sty did something similar before; i.e., it reserved -% .5\normalbaselineskip (with respect to \footnotesize) for the notes. -% This may not be needed on some pages (on such pages there may be -% too much empty vertical space). -% ---For the best solution you should, when your work is ready and -% only needs optimization of formatting, type -% \ExtraParaSkip{-.5\normalbaselineskip} -% (to remove the space that Manyfoot.sty reserves) and then insert -% \pagebreak's in your main text to avoid overful pages. -% ---We formerly offered a command \MFparaxbuffer in file -% `mfparxsp.sty' instead. This could be used once only in the -% document preamble. \ExtraParaSkip does not have this limitation. -% This allows, e.g., first setting a "default" value and changing it -% under certain conditions, e.g.: -% \ExtraParaSkip{<skip1>} ... \if... \ExtraParaSkip{<skip2>} ... \fi -% (Thanks to Florian Kragl who presented a similar first remedy for -% the problem.) -% -% *The problem of oscillating page breaks:* -% In typesetting critical editions, there is an increased danger -% of page break oscillations, causing wrong numberings, -% placements, and cross-references. Our package `lblchng1.sty' -% (same CTAN directory) offers help with this. However, -% `ednotes.sty' v1.1 takes over most of the job from -% `lblchng1.sty'. We still recommend to *read the file* -% `lblchng1.sty' on how to use the messages from `lblchng1.sty' -% and `ednotes.sty' on page number changes (be sure that it is -% v0.32 or higher). The warnings from ednotes.sty may suffice. -% Just look at the final messages on screen or in .log. -% -- You can overcome such problems using \pagebreak -% (Standard LaTeX) or \warningpagebreak (from present package) -% -- force the earlier page break! -% \warningpagebreak works like Standard LaTeX \pagebreak, it just -% adds a reminder for the case that such a manual page break -% may become bad after revisions of your entire work. -% -% *A problem with `hyperref.sty':* -% To guarantee compatibility with `hyperref', updating lineno.sty -% to v4.3 is recommended. -% -% *Note on EDMAC:* -% `edmac.doc' is a macro package by John Lavagnino and -% Dominik Wujastyk made for critical editions to be used in presence -% of Plain TeX only. We refer to the macros and documentation of -% this package by `EDMAC'. There is an enhancement `edmacfss.sty' -% for additionally employing the New Font Selection Scheme (NFSS) -% from LaTeX2e. With `edmacfss.sty', some LaTeX commands work by -% accident. However, it replaces LaTeX's \end by PlainTeX's \end, -% so LaTeX environments don't work. Moreover, -% EDMAC defines its own output routine in place of LaTeX's, -% so LaTeX's page assembly and related commands (\marginpar ...) -% are disabled. EDMAC still provides facilities -% (columnar footnotes, endnotes, sublines) which are neither -% implemented here nor in packages `manyfoot' and `lineno' -% on which the present one is based. However, there are authors -% who have had a desire to stay in LaTeX's paradise and to enjoy -%% TODO: Hilbert translation -% EDMAC features at the same time. (E.g., edition may be only part -% of your document, or you want to use many LaTeX packages.) -% Fortunately, Christian was led to packages `manyfoot' and `lineno' -% which implement the most desirable of EDMAC's facilities for use -% with LaTeX. A version of EDMAC's \text and assembly of notes -% remained to be done. We even go beyond EDMAC concerning lemma -% substitutes and overlapping lemmas. -% ---For explanation of present solutions, we sometimes refer to -% EDMAC where similar problems are dealt with in similar but -% sometimes essentially differing ways. Therefore, knowledge of -% EDMAC may foster your understanding commands and remarks -% presented here, but it is not required. -% ---Dominik maintains a homepage for EDMAC and related software: -% http://www.homepages.ucl.ac.uk/~ucgadkw/edmac/ -% -% *Comparison with LEDMAC:* -% (Cf. http://ednotes.sty.de.vu and `ednotugb.pdf'.) -% Peter Wilson's LEDMAC ports EDMAC to LaTeX, i.e., you get -% almost exactly EDMAC *functionality* and same *user interface* -% as in good old EDMAC (some slight changes of command names -% were necessary). Thus it offers a very easy switch to LaTeX -% for EDMAC addicts and is superior in functionality to `ednotes.sty' -% where EDMAC is (columnar footnotes, endnotes, sublines, etc.? -% --first two might change over the years). `ednotes.sty' might -% be favoured if you really need overlapping lemmas, and we tried -% to offer further user-friendly features as spelled out above. -% --Some users want to edit tables. For EDMAC there is the -% TABMAC package providing special commands for this. A TABMAC -% port is part of LEDMAC. This is nice for EDMAC/TABMAC addicts. -% Our additional package `edtable.sty' allows for lemmas in (some) -% LaTeX tabular environments and numbers their rows as if they were -% lines. This is nice for those who only know the LaTeX tabular -% environments. However, TABMAC and its mirror in LEDMAC offer -% facilities which are not provided by LaTeX/ednotes/edtable. -% --LEDMAC *implementation* is very close to EDMAC's as well, -% differing very much from `ednotes.sty', especially concerning -% use of auxiliary files. However, this seems to have no practical -% effects. On very old machines, EDMAC/LEDMAC might be slower, while -% Ednotes might cause memory overflow with small TeX versions and -% many notes. Peter Wilson [3/3 2004] estimates that rather -% EDMAC's/LEDMAC's typesetting everything twice might be a -% disadvantage in comparison with `ednotes.sty'. -% ---In 2004 LEDMAC has been enhanced considerably beyond the -% functionality of EDMAC and `ednotes.sty'. -% It now also includes indexing by line as well as by page, -% a port of Wayne Sullivan's EDSTANZA, new options for line -% numbering, a minipage-like environment (which may break across -% pages) such that remarks are printed immediately after some piece -% of edited text (a letter, e.g.), and "sidenotes". -% Finally an extension package `ledpar' adds parallel typsetting. -% --At least for some time LEDMAC will be more user-friendly -% in providing all functions in a single file with *one* -% *printable* documentation file. %% TODO -% On the other hand, packages we build on are still being enhanced -% in functionality by their authors. -% -% -%% Acknowledgements -% -% Christian saved me from most of the work by having found -% packages `lineno.sty' by Stephan I. B"ottcher and `manyfoot.sty' -% by Alexander I. Rozhenko which do the output stuff. Thanks to -% Christian, Stephan and Alex! I appreciate their work (especially -% Stephan's approach to adding and remembering line numbers), and I -% admire John Lavagnino's and Dominik Wujastyk's work on EDMAC. -% I am also grateful for their encouragement. U.L. -% -% Moreover I am much indebted to Stephan B"ottcher and Alex -% Rozhenko for their co-operation in reducing the number of -% package files that `ednotes.sty' needs. (This was 2004, -% version v1.0.) -% -% For pointing out errors and problems, we are grateful to test -% users Robert Alessi, Sergei Mariev---see version history. -% Florian Kragl contributed to now `manyfoot.sty's \ExtraParaSkip -% as described above. v1.1 and v1.23c are due to problems that -% Roy Flechner reported. v1.12 is due to Hillel Chayim Yisraeli's -% discovery of spurious footnote marks. -% -\NeedsTeXFormat{LaTeX2e}[1994/12/01] -% 1994/12/01: \newcommand* etc. %% TODO: more recent needed? -\ProvidesPackage{ednotes} - [\filedate\space v\fileversion, - for critical editions] - %%%(ul)]%%%by Uwe L\string\"uck.] -% -%% Our warnings: -\def\@EN@warning{\PackageWarning{ednotes}} -% -%% Package Options: -% -% Own options -% (must appear before `para*' so this can override `para'): -%% TODO: true!? -%% TODO: Something to make use of Alex' \SplitNote!? -\let\if@EN@Apara\iftrue % Makes option `Apara' default. -\DeclareOption{Apara}{% Redundant, just in case ... - \@EN@warning{Package Option `Apara' is redundant} -% \PassOptionsToPackage{para}{manyfoot}% -% \AtEndOfPackage{% -% \newfootnote[para]{A}% -% \newcommand{\Anote}{\@EN@note A}% -% \newcommand{\Anotelabel}{\@EN@notelabel A}% -% }} -} -\DeclareOption{Aplain}{% - \let\if@EN@Apara\iffalse -% \AtEndOfPackage{% -% \newfootnote{A}% -% \newcommand{\Anote}{\@EN@note A}% -% \newcommand{\Anotelabel}{\@EN@notelabel A}% -% }} -} -\DeclareOption{Bpara}{% - \PassOptionsToPackage{para}{manyfoot}% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@B}% - \let\@EN@MF@hook@B\@empty - \@ifundefined{SelectBnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectBnoteRule - \let\SelectBnoteRule\relax}% - \newfootnote[para]{B}% - \newcommand{\Bnote}{\@EN@note B}% - \newcommand{\Bnotelabel}{\@EN@notelabel B}% -}} -\DeclareOption{Bplain}{% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@B}% - \let\@EN@MF@hook@B\@empty - \@ifundefined{SelectBnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectBnoteRule - \let\SelectBnoteRule\relax}% - \newfootnote{B}% - \newcommand{\Bnote}{\@EN@note B}% - \newcommand{\Bnotelabel}{\@EN@notelabel B}% -}} -\DeclareOption{Cpara}{% - \PassOptionsToPackage{para}{manyfoot}% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@C}% - \let\@EN@MF@hook@C\@empty - \@ifundefined{SelectCnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectCnoteRule - \let\SelectCnoteRule\relax}% - \newfootnote[para]{C}% - \newcommand{\Cnote}{\@EN@note C}% - \newcommand{\Cnotelabel}{\@EN@notelabel C}% -}} -\DeclareOption{Cplain}{% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@C}% - \let\@EN@MF@hook@C\@empty - \@ifundefined{SelectCnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectCnoteRule - \let\SelectCnoteRule\relax}% - \newfootnote{C}% - \newcommand{\Cnote}{\@EN@note C}% - \newcommand{\Cnotelabel}{\@EN@notelabel C}% -}} -\DeclareOption{Dpara}{% - \PassOptionsToPackage{para}{manyfoot}% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@D}% - \let\@EN@MF@hook@D\@empty - \@ifundefined{SelectDnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectDnoteRule - \let\SelectDnoteRule\relax}% - \newfootnote[para]{D}% - \newcommand{\Dnote}{\@EN@note D}% - \newcommand{\Dnotelabel}{\@EN@notelabel D}% -}} -\DeclareOption{Dplain}{% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@D}% - \let\@EN@MF@hook@D\@empty - \@ifundefined{SelectDnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectDnoteRule - \let\SelectDnoteRule\relax}% - \newfootnote{D}% - \newcommand{\Dnote}{\@EN@note D}% - \newcommand{\Dnotelabel}{\@EN@notelabel D}% -}} -\DeclareOption{Epara}{% - \PassOptionsToPackage{para}{manyfoot}% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@E}% - \let\@EN@MF@hook@E\@empty - \@ifundefined{SelectEnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectEnoteRule - \let\SelectEnoteRule\relax}% - \newfootnote[para]{E}% - \newcommand{\Enote}{\@EN@note E}% - \newcommand{\Enotelabel}{\@EN@notelabel E}% -}} -\DeclareOption{Eplain}{% - \AtEndOfPackage{% - \SetFootnoteHook{\@EN@MF@hook@E}% - \let\@EN@MF@hook@E\@empty - \@ifundefined{SelectEnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectEnoteRule - \let\SelectEnoteRule\relax}% - \newfootnote{E}% - \newcommand{\Enote}{\@EN@note E}% - \newcommand{\Enotelabel}{\@EN@notelabel E}% -}} -% This is as much as EDMAC provides. -%% TODO: efficiency!? -%% TODO: shorten previous by temporary defining macro -%% \@EN@tempa!? (dangerous) -% -% Load `mfparptc.sty' after `manyfoot.sty': -\DeclareOption{edmacpara}{% - \AtEndOfPackage{% -% \RequirePackage{afterpackage}\AfterPackage{% TODO - \RequirePackage{mfparptc}[2006/06/26]}% -% <- nccfoots v1.2. -% }% -} -% -%% TODO \afterpackage: -% Load `edcntwd0.sty' after `lineno.sty': -\DeclareOption{countoccurrences}{% - \AtEndOfPackage{\RequirePackage{edcntwd0}[2006/06/16]}} -% <- first occurrence bug fix. -% -% `edtable' options remain "unknown" and thus are passed to -% `lineno.sty'. -% -% Options for package `manyfoot': -% Calling option `ruled' or `para' for `ednotes' is redundant, -% but in case ... -\DeclareOption{ruled}{\@EN@warning% - {Package Option `ruled' is redundant}} -\DeclareOption{para}{\@EN@warning% - {Package Option `para' is redundant}} -\DeclareOption{para*}{\PassOptionsToPackage{para*}{manyfoot}} -% Suppresses footnote indentation. -% Overrides `para' as called from own options. -\DeclareOption{perpage}{\PassOptionsToPackage{perpage}{manyfoot}} -% -% Options for package `lineno': -\DeclareOption{mathnotes}{\PassOptionsToPackage{mathrefs}{lineno}} -\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{lineno}} -% -% %% TODO: Really load lineno.sty here!? Otherwise remove options. -% %% TODO: Interfaces for alternative auxiliary packages. -% \ExecuteOptions{Apara} % \newcommand... bad for opposite option. -\ProcessOptions -% -%% Load required packages: -\RequirePackage[ruled\if@EN@Apara,para\fi]{manyfoot}[2005/05/11] -%% <- \SetFootnoteHook -%% todo: Leave choice to user!? -> `unruled' -- \Select... suffices. -%% TODO: ruled -> \Execute...!? - -\RequirePackage{lineno}[2004/10/11] -% Hack for `lineno.sty' version. If \@LN@postlabel is defined, assume -% `lineno' version 4 has been loaded. %% TODO -\@ifundefined{@LN@postlabel}{% - \@EN@warning{We urge you to use `lineno.sty' version 4!} - \RequirePackage{linenox0}[2004/08/12]%% No page break after heading -%% (left to `linenox1.sty'). -}\relax -% -%% Execute option concerning first apparatus: -\SetFootnoteHook{\@EN@MF@hook@A} -\let\@EN@MF@hook@A\@empty -\@ifundefined{SelectAnoteRule}{}{% - \expandafter\SelectFootnoteRule\SelectAnoteRule - \let\SelectAnoteRule\relax}% -\if@EN@Apara - \newfootnote[para]{A}% Needs `manyfoot.sty'. - \newcommand{\Anote}{\@EN@note A}% - \newcommand{\Anotelabel}{\@EN@notelabel A}% -\else - \newfootnote{A}% - \newcommand{\Anote}{\@EN@note A}% - \newcommand{\Anotelabel}{\@EN@notelabel A}% -\fi -% -%% User commands (if not defined in option code etc.): -\newcommand{\addlemmaexpands}{\@EN@addtomacro\@EN@lemmaexpands} -%% <- local; cf. using LaTeX's \g@addto@macro: %% TODO: decide -\newcommand{\showlemmaexpands}{% - \typeout{\string\@EN@lemmaexpands=\meaning\@EN@lemmaexpands}% -} -% -\DeclareTextCommandDefault{\textsymmdots}{% - .\kern\fontdimen3\font.\kern\fontdimen3\font.\@% -} -% -% -%% Customizable commands: -% -\newcommand*{\sameline}[1]{\linesfmt{#1}} -\newcommand*{\differentlines}[2]{\linesfmt{#1\textendash#2}} -%% TODO: \linesfmt into \@EN@note!? -\newcommand*{\linesfmt}[1]{\textbf{#1}\enspace} -\newcommand*{\pageandline}[2]{#1.#2} -\newcommand*{\repeatref}[1]{#1} -% \newcommand*{\repeatref}[1]{\textnormal{/}} -\newcommand{\lemmafmt}[1]{#1\thinspace]\enskip} %% TODO: \long!? -\newcommand{\lemmaellipsis}{\textsymmdots} -\newcommand{\notefmt}[1]{#1} \let\notefmt\@firstofone -%% <- TODO: \long!? -% \newcommand{\notefmt}[1]{#1.} -% -%% Core code: - -% Interface for manyfoot's \SetFootnoteHook facility: -\newcommand{\PrecedeLevelWith}[2]{% - \expandafter \renewcommand \csname @EN@MF@hook@#1\endcsname{#2}} -% \renewcommand might help when an level is addressed that -% has not been called through an option. - -% Auxiliary needed before calling \addlemmaexpands below: -\long\def\@EN@addtomacro#1#2{% #1 cs, #2 new. -% Local, cf. LaTeX's \g@addto@macro. - \expandafter\def\expandafter#1\expandafter{#1#2}% -} -% %% TODO: \long!? see building of lemmaarg and lemmatag. -%% TODO: \tok@ so no doubling of `#'!? -% -% Our sphack for going around control sequences in text: -\def\@EN@sphack{\relax - \ifhmode\ifdim\lastskip>\z@ \ignorespaces \fi\fi -} -% For ellipsis commands in moving arguments: -\def\IfTypesetting{% - \ifx\protect\@typeset@protect \expandafter \@firstoftwo - \else \expandafter \@secondoftwo - \fi -} -% A nice shortcut (v1.23): -\def\@EN@xpxpxp{\expandafter\expandafter\expandafter} - -% Basic handling of \Anote etc.: -\long\def\@EN@note#1#2{% #1 note family, #2 lemma. - \IfTypesetting{% - \def\@EN@notefam{#1}\@EN@process #2\<\>\@nil - }{\@EN@robust@process #2\<\>\@nil}% -} -% -% Lemma versions and preparing label: -\long\def\@EN@process#1\<#2\>#3\@nil{% -% Usage: \@EN@process #k\<\>\@nil. -%% TODO: simplify using LaTeX's \in@!? -% Implementation: don't leave control to user's input unless \<, \> -% have been processed. <...> is postponed in main text. - \def\@EN@lemmaarg{\ignorespaces#1}% -% \ifx\@EN@lemmaarg\@empty %% \fi %% TODO: complain!? -% \let\@EN@lemmatag\@EN@lemmaarg %% Would be overridden. - \ifx\@nnil#2#3\@nnil - % No ellipsis, #1 all of user's input, dummy \<\> gobbled. - \@EN@addtomacro\@EN@lemmaarg\unskip - \@EN@simplelemmatag - \@EN@mathlemmatag - \else - \@EN@simplelemmatag - \ifx\@nnil#3\@nnil % \<, but no \> from user. - % #2 ends on \<, \>\@nil gobbled. - \@EN@gobble@pause#2\@nil\@nil - \else - % #3 ends on dummy \<\>. - \@EN@gobble@resume\@EN@gobble@pause#2\@EN@sphack\@nil - % This \@EN@sphack replacing \> in main text. - #3\@nil\@nil - \fi - \fi - \IfLemmaTag % v1.3 - {\@EN@lemmaarg\@gobble}% - %% TODO: \...process might otherwise be redirected to - %% \...robust@process immediately. %% ??? - {\stepcounter{EN@label}% -% Much must be expanded, especially for storing the note in a -% hook (some tables): - \edef\@EN@tempa{\noexpand\@EN@putdown{EN@l\number\c@EN@label}}% - \@EN@xpxpxp \@EN@tempa - \expandafter \@EN@notefam \expandafter {\@EN@lemmatag}}% -} -\long\def\@EN@gobble@pause#1\<\@nil{% - \futurelet\@let@token - %% <- TODO \@EN@finishlemma like \@EN@gobble@opt@till!? - \@EN@finishlemma #1\@nil} -% #1 contains \@nil separating arguments. -% Variant of LaTeX's \@ifnextchar---don't gobble spaces: -\def\@EN@finishlemma{% - \ifx\@let@token<% - \let\@EN@next\@EN@xfinlem - \else - \def\@EN@next{\@EN@xfinlem<\lemmaellipsis>}% - \fi - \@EN@next -} -\long\def\@EN@xfinlem<#1>#2\@nil#3\@nil{% - \@EN@addtomacro\@EN@lemmaarg{\@EN@sphack#2#3\unskip}% - \@EN@addtomacro\@EN@lemmatag{#1\@EN@CWhook{#2}#3\unskip}% - \@EN@mathlemmatag - % %% TODO: doc.: final \unskip -> space properly! -} -% Brackets might have been used instead of <ELL>; however, -% I am afraid that the user might use brackets at symbols to be -% printed right here. Alternative (but needs extra code to test -% for \extraellipsis): \extraellipsis{ELL}. %% TODO: decide -% Think of keyboards without `<', `>'? -\long\def\@EN@gobble@resume#1\>\@nil{#1} -\let\@EN@CWhook\@gobble %% For counting words package. -\def\@EN@simplelemmatag{\let\@EN@lemmatag\@EN@lemmaarg} -% Useful for math mode extension as well. -\let\@EN@mathlemmatag\relax %% Hook for math mode. -% -% \newcounter{EN@label} -% % <- for \includeonly, v1.23; sufficient v1.3: -\newcount\c@EN@label -\@addtoreset{EN@label}{@ckpt} -% -% New mechanism for ellipsis in lemma -- supporting nested lemmas -% or at least lemmas shared by apparatuses exceeding one -% (v1.22b 2006/01/13): -\def\@EN@ltag@ellipsis{% - \futurelet\@let@token\@EN@make@nested@lemmaellipsis}% -\def\@EN@make@nested@lemmaellipsis{% - \ifx\@let@token<% - \expandafter \@EN@ellipsis@only - \else - \expandafter \@EN@ellipsis@only - \expandafter <\expandafter \lemmaellipsis \expandafter >% - \fi} -\long\def\@EN@ellipsis@only<#1>#2\>{#1} -% -% .aux entries, note, and lemma in main text: -% (v1.1: much changes. I just remove what was before, see stored -% older version.) -\long\def\@EN@putdown#1#2#3#4{% -% #1 label, #2 note family, #3 lemma tag, #4 note. -% %% TODO: \long!? - \linelabel{-#1}% Ensures hmode. -% Insert footnote: - \@EN@hookfn{% - \csname Footnotetext#2\endcsname\@empty{% -% \@empty v1.12, due to HCY's report of spurious footnote marks. - \csname#2notefmt\endcsname - \let\@currentlabel\@empty - \label{#1}% Need page number of note. - \let\nopunct\@gobble % or by \if... -% Print line numbers: - \@ifundefined{r@#1}% -%%% ...unknown + ...incomplete@ref v1.23: %%% - {\differentlines\@EN@unknown\@EN@unknown}% - {\let\@EN@incomplete@ref\relax - \@EN@xpxpxp \@EN@extract\csname r@#1\endcsname - \@EN@incomplete@ref\@EN@incomplete@ref - \@EN@incomplete@ref\@EN@incomplete@ref - \ifx\@EN@elemp\@EN@Incomplete - \G@refundefinedtrue - \let\@EN@incomplete@ref\@EN@unknown - \fi - \@tempswatrue - \ifx\@EN@bleml\@EN@eleml \else \@tempswafalse \fi -% Restart of line numbers / different page!? - \ifx\@EN@blemp\@EN@elemp \else \@tempswafalse \fi - \if@tempswa - \sameline{\@EN@plref\@EN@blemp\@EN@bleml}% - \else - \@EN@lastline@z@ - \differentlines{\@EN@plref\@EN@blemp\@EN@bleml}% - {\ifx\@EN@blemp\@EN@elemp % v1.23 - \@EN@eleml - \else - \pageandline\@EN@elemp\@EN@eleml - \fi}% -% {\@EN@plref\@EN@elemp\@EN@eleml}% - \@EN@lastline@z@ - \fi}% -% \strut % Redundant (\rule\z@\footnotesep TODO: CHECK) -% \expandafter \let \csname r@#1\endcsname \relax %% v1.1. -%% <- 2005/02/21: No, need label for testing. - \lemmafmt{{\@EN@lemmaexpands#3}}% - \notefmt{#4}% - }% - }% - % Lemma in main text: - \nobreak \hskip\z@skip %% 2006/01/12 cf. german.sty: \allowhyphens - \@EN@lemmaarg %% Should not end with space so \linelabel... -%% \allowhyphens not needed here (tested) 2006/01/12 - \linelabel{+#1}% - % \csname #1rightmark\endcsname %% Suggested. -} -\let\@EN@hookfn\@firstofone -\def\@EN@extract#1#2#3#4#5{% -% #1 note page, #2 first lemma line, #3 first lemma page, -% #4 last lemma line #5 last lemma page. - \def\@EN@tempa{#1}% - \def\@EN@bleml{#2}\def\@EN@blemp{#3}% - \def\@EN@eleml{#4}\def\@EN@elemp{#5}% -} -\def\@EN@unknown{\textnormal{\bfseries ??}} % v1.23 -\def\@EN@Incomplete{\@EN@incomplete@ref} % v1.23 -\def\@EN@lastline@z@{\global\let\@EN@lastline\z@} -\@EN@lastline@z@ % Next line number in note explicitly. -\def\@EN@plref#1#2{% #1 page, #2 line. -% \@EN@tempa is note page from \@EN@extract. - \ifx#1\@EN@tempa %% Note and lemma part on same page. - \ifx#2\@EN@lastline %% Same line as before. - \repeatref#2% %% v1.1: changed use! - \else - #2\global\let\@EN@lastline#2% - \fi - \else - \pageandline#1#2% %% v1.1: new! - \fi -} -% -% Expanding in note version of lemma: -\let\@EN@lemmaexpands\@empty -\long\def\@EN@gobble{\@EN@sphack\@gobble} -\long\def\@EN@gobbletwo{\@EN@sphack\@gobbletwo} -\long\def\@EN@secondofthree#1#2#3{\@EN@sphack#2} -\let\IfLemmaTag\@secondoftwo % v1.3 -% <- Had thought I would use it more than once ... -% ... maybe for replacing some \addlemmaexpands entries: -\addlemmaexpands{% - \let\IfLemmaTag\@firstoftwo - \let\notinnote\@EN@gobble - \let\@EN@note\@EN@secondofthree - \let\@EN@notelabel\@EN@gobbletwo -% \let\resume\notinnote \let\pause\notinnote - % <- v1.23c -- Thanks to Roy Flechner. -% \let\pause\@EN@pause@ltag % v1.3 -% \let\donote\@EN@gobbletwo - \let\label\notinnote \let\linelabel\notinnote - \let\<\@EN@ltag@ellipsis -} -%% <- TODO: user commands only!? (no \let) -%% TODO: cf. EDMAC's tag (fonts? accents? -- lineno.sty commands?) -\let\notinnote\@firstofone -% -% Variant of \@EN@process when moving: (v1.21/1.22) -\long\def\@EN@robust@process#1\<#2\>#3\@nil#4{% - #1% - \ifx\@nnil#2#3\@nnil - % No ellipsis, #1 all of user's input, dummy \<\> gobbled. - \else - \@EN@sphack@aux{}% for ensuing space in .aux, v1.3 - \ifx\@nnil#3\@nnil % \<, but no \> from user. - % #2 ends on \<, \>\@nil gobbled. - \@EN@robust@gobble@pause#2\@nil - \else % #3 ends on dummy \<\>. - \@EN@gobble@resume - \@EN@robust@gobble@pause#2\@EN@sphack@aux{}#3\@nil\@nil - \fi - \fi -} -\DeclareRobustCommand{\@EN@sphack@aux}{\@EN@sphack\@gobble} -\long\def\@EN@robust@gobble@pause#1\<\@nil{% - \@EN@gobble@opt@till#1<>\@nil} -\long\def\@EN@gobble@opt@till#1<#2>#3\@nil{% - \ifx\@nnil#3\@nnil - #1\ifx\@nnil#2\@nnil \else - <\@EN@gobble@less#2\@nil \fi % v1.3 - \else - \ifx\@nnil#1\@nnil\else#1<#2>\fi \@EN@gobble@diamond #3\@nil - \fi} - % <- TODO weak against aggressive expansion -\long\def\@EN@gobble@less#1<\@nil{} -\long\def\@EN@gobble@diamond#1<>\@nil{#1} -% -% Shorthand macros for lemma in moving argument: -\newcommand\RobustTestOpt{% - \ifx\protect\@typeset@protect \else - \expandafter \@EN@robust@test@opt - \fi -} -\long\def\@EN@robust@test@opt#1#2#{% - \ifx\@nnil#2\@nnil - \@EN@xpxpxp \@EN@expand@with@default - \else - \@EN@xpxpxp \@EN@expand@with@option - \fi - #1#2} -\newcommand\@EN@expand@with@default[4]{#3[{#4}]} -\newcommand\@EN@expand@with@option[4]{#3} - -\newcommand\NewEdnotesCommand{% - \@ifstar{\@EN@newcommand*}{\@EN@newcommand{}}} -\def\@EN@newcommand#1#2[#3][#4]{% - \expandafter \newcommand \expandafter #2\expandafter {% - \expandafter \RobustTestOpt \csname \string #2\endcsname} - \def\@tempa{\newcommand#1}% - \expandafter \@tempa \csname \string #2\endcsname[#3][#4]} - -% Handling \Anotelabel etc.: -% \@EN@lemmaarg is to become the LEMMA argument for \@EN@process. -% A first version is obtained by reading unto the \donote -% bearing the same label. \@EN@lemmaarg is then rebuilt, -% replacing \pause and \resume by \< and \>. -\def\@EN@notelabel#1#2{% #1 note family, #2 label. - \IfTypesetting{% v1.3 - \def\@EN@notefam{#1}% - \def\@EN@laplabel{#2}% - \let\@EN@lemmaarg\@empty - \let\@EN@next\@EN@firstnext - \@EN@next - }\relax % Second argument: otherwise do nothing. -% The following removed braces urgently needed: -% \@EN@getlabel\donote -% {\@EN@laplabel -% \expandafter\def\expandafter\@EN@next\expandafter -% {\expandafter\@EN@replacepause -% \@EN@lemmaarg\pause\@nil\resume\@nil}% -% \else -% \@EN@appendwrong -% }% -} -\long\def\@EN@firstnext#1\donote#2#3{% - \def\@EN@tempa{#2}% - \ifx \@EN@tempa \@EN@laplabel - \@EN@addtomacro\@EN@lemmaarg{#1}% - \expandafter \def \expandafter \@EN@next \expandafter {% - \expandafter \@EN@replacepause - \@EN@lemmaarg \pause\@nil\resume\@nil{#3}}% - \else - \@EN@addtomacro\@EN@lemmaarg{#1\donote{#2}{#3}}% - \fi - \@EN@next -}% -\def\@EN@getlabel#1#2{% -% jump to cs #1, #2: on \@EN@tempa=... -% \let#2\@empty - \def\@EN@appendwrong{% - \expandafter\@EN@addtomacro \expandafter\@EN@lemmaarg - \expandafter {\expandafter#1\expandafter{\@EN@tempa}}% - }% - \long\def\@EN@next##1#1##2{% - % %% TODO: \let [pre-defined] for efficiency!? - \@EN@addtomacro\@EN@lemmaarg{##1}% - \def\@EN@tempa{##2}% - \ifx\@EN@tempa#2\fi - \@EN@next - }% - \@EN@next -} -\def\@EN@replacepause{% - \let\@EN@lemmaarg\@empty - \@EN@getlabel\pause - {\@nnil - \def\@EN@next\resume\@nil{\@EN@donote}% - \else - \ifx\@EN@tempa\@EN@laplabel - \@EN@addtomacro\@EN@lemmaarg\<% - \let\@EN@next\@EN@replaceresume - \else - \@EN@appendwrong - \fi - }% -} -\long\def\@EN@replaceresume#1\pause\@nil{% - \@EN@getlabel\resume - {\@nnil - \let\@EN@next\@EN@donote - \else - \ifx\@EN@tempa\@EN@laplabel - \long\def\@EN@next####1\resume\@nil - % %% TODO: \let [pre-defined] for efficiency!? - {\@EN@addtomacro\@EN@lemmaarg{\>####1}\@EN@donote}% - \else - \@EN@appendwrong - \fi - }% - #1% \resume\@nil ahead. -} -\def\@EN@donote{\expandafter\@EN@process\@EN@lemmaarg \<\>\@nil} -% -% Variants for \@EN@notelabel in lemma tag or when moving: -% (v1.3) -\def\@EN@notelabel@cmd#1#2#3{% - \IfLemmaTag{#2}{% - \IfTypesetting{% - \PackageError{ednotes}{Misplaced \string#1}{% - Missing ...notelabel; - cf. package documentation.}% - }{\@EN@sphack@aux{}#3}}} -% -\newcommand\pause{% - \@EN@notelabel@cmd\pause - {\futurelet\@let@token\@EN@pause@ltag}\@EN@pause@aux} -\def\@EN@pause@ltag#1{% - \@EN@sphack\ifx\@let@token<\expandafter\@EN@gobble@opt\fi} -\def\@EN@gobble@opt<#1>{} -\long\def\@EN@pause@aux#1#2\resume{% - \@EN@gobble@opt@till #2<>\@nil\resume} -% -\newcommand\resume{% - \@EN@notelabel@cmd\resume\@EN@gobble\@gobble} -\newcommand\donote{% - \@EN@notelabel@cmd\donote\@EN@gobbletwo\@gobbletwo} - -% v1.1: reduce number of control strings from \newlabel. -% We keep using \linelabel and \label for kind of simplicity and -% because modifying them would hardly save time or save us from -% the difficulties that we face here. Instead we modify -% \newlabel to prevent it from dealing with labels coming from -% annotations in the usual way. -% -% Storing and restoring of \newlabel and `lineno.sty's -% \getpagewiselinenumber: %% TODO: do without the latter anyway? -\let\@EN@newlabel\newlabel -\let\@EN@getpagewiselno\getpagewiselinenumber -\let\getpagewiselinenumber\relax -\AtBeginDocument{\let\getpagewiselinenumber\@EN@getpagewiselno} -% -% For each lemma and note, there will be one macro carrying the -% corresponding line and page numbers. Below, \@EN@tempa will -% carry the name of that macro. \@EN@bleml will be the line -% number, \@EN@blemp the page number from the \newlabel arguments. -% \@EN@extractcslp will do the assignments for \@EN@tempa, -% \@EN@bleml, and \@EN@blemp. Three \newlabel's will come to -% deliver the numbers for one note, each will add to the -% expansion code of the corresponding macro. The page number of -% the note is attached to the left; ensuring that it is on the -% same place in each case. (Indeed, usually the .aux entry from -% the note comes .aux after the final entry from the lemma, but -% when a page break happens within the latter, this order may -% reverse.) \@EN@addtolabeldef will do this. It will at first -% look as if \@EN@extractcslp and \@EN@addtolabeldef should -% better have been merged into one single macro; however, we -% need them for the final testing function below, where they -% appear in different contexts. -% TODO: The format of the numbers list is -% {<notepage>}{<blemline>}{<blempage>}{<elemline>}{<elempage>} -% This is LaTeX-like, cf. storing of the numbers for a usual -% \ref. It is easy to read the second or so term. Yet it wastes -% a lot of memory with critical editions. It might be better to -% use a single token as separator, as (L)EDMAC do. -% -\def\@EN@addtolabeldef#1#2{% add #1 left, #2 right. - \expandafter \protected@xdef \@EN@tempa{% - #1\@EN@tempa#2}} -\def\@EN@fornotelabel#1#2#3{% #1 sign, #2 label, #3 def. - \in@{\@@#1EN@l}{\@@#2}% LaTeX's \in@, \ifin@. - \ifin@ - \@EN@extractcslp#2\@nil#3\@nil -% Now, in one step, \@EN@tempa expands to the name of the macro -% that \newlabel defines at \begin{document}. -% The \newlabel with `-' will always come first, so this macro -% has not been defined yet: - \expandafter\@firstoftwo - \else - \expandafter\@secondoftwo - \fi} -\def\newlabel#1#2{% -% It should be possible to read #2 later, but it's difficult. -% ...extractcslp might be split into parts of ...fornotelabel -% and some other macro doing more. [TODO] - \@EN@fornotelabel-{#1}{#2}{% - \@EN@addtolabeldef\@gobble{{\@EN@bleml}{\@EN@blemp}}% -% \typeout{\expandafter\string\@EN@tempa \space -% (-) \expandafter\meaning\@EN@tempa}% - }{\@EN@fornotelabel+{#1}{#2}{% - \@EN@addtolabeldef{}{{\@EN@bleml}{\@EN@blemp}}% -% \typeout{\expandafter\string\@EN@tempa \space -% (+) \expandafter\meaning\@EN@tempa}% - }{\@EN@fornotelabel{}{#1}{#2}{% - \@EN@addtolabeldef{{\@EN@blemp}}{}% -% \typeout{\expandafter\string\@EN@tempa \space -% (p) \expandafter\meaning\@EN@tempa}% - }{\@EN@newlabel{#1}{#2}}% - }% + - }% - -} -\@onlypreamble\newlabel % Unlike LaTeX, but get rid of all of -% % this. A new version comes \AtEnd... -% -\def\@EN@extractcslp#1E#2\@nil#3#4#5\@nil{% -% #1 "sign", #2 label after `E'; #5 for `hyperref.sty'. -% The `E' is needed when neither - nor + ... - \expandafter \def \expandafter \@EN@tempa \expandafter{% - \csname r@E#2\endcsname}% -% Use `r@' for \ref, cf. \@EN@putdown. - \def\@EN@bleml{#3}\def\@EN@blemp{#4}} -% <- Just avoid additional control strings. -% No \@onlypreamble, use it in the final run as well. -% -% v1.1: final testing of label changes with the compressed -% definitions (cf. `lblchng1.sty'). -% We use the compression mechanism from the beginning to -% determine the definitions for the next run. To compare them -% with the present definitions, the latter must be stored -% before. With nesting or overlapping lemmas, other notes may -% send their information before the new definition for one note -% has been finished. And when we receive data from these other -% notes, we must store their previous data as well. So we cannot -% use one single control string to \let it be the string that -% carries the previous data corresponding to a note. Yet we -% don't want to double the number of strings corresponding to -% notes here. So we store the definitions in one single list, -% yet only for as long as the comparison has not been completed. -% -% To tell to the third \newlabel that it is the third indeed, -% the second \newlabel adds \@EN@ready together with number(s): -\def\@EN@test@addtolabeldef#1#2{% - \expandafter - \ifx \@EN@tempa \relax \else -% Test whether this is the third \newlabel for the note: - \@EN@xpxpxp \in@ - \expandafter\expandafter\expandafter \@EN@ready - \expandafter\expandafter\expandafter {\@EN@tempa}% - \ifin@ \let\@EN@ready\@empty \fi - \@EN@addtolabeldef{#1}{#2}% Warning: should not use \in@! - \ifin@ - \let\@EN@ready\relax - \expandafter\@EN@prepare@fromtl\@EN@tempa\@nil - \expandafter\@tempa\@EN@testinglist\@nil - \expandafter - \ifx \@EN@tempa \@tempa \else - \@tempswatrue - \ifx\@tempa\relax \else - \expandafter\@EN@takepagesto\@tempa\@tempa - \@EN@xpxpxp \@EN@takepagesto\@EN@tempa\@EN@tempa -% The message may come when line numbers have changed, not page -% numbers. This may puzzle some users, but should be harmless. - \typeout{^^JPackage `ednotes.sty':^^J% - *** A lemma or note moved. Page numbers - \@tempa\space turned into \@EN@tempa.^^J*** - Rerun and watch whether they come to rest and references - get right.^^J*** If they don't, use \string\pagebreak\space - or \string\warningpagebreak\space to force^^J*** the earlier - of oscillating page breaks.^^J*** (Cf. package documentation - on `oscillating page breaks'.)}% - \let\newlabel\@EN@newlabel - \def\@newl@bel{\@gobblefour\relax}% Cf. `lblchng1.sty'. - \fi - \fi - \fi - \fi -}% -\let\@EN@ready\relax -\let\@EN@testinglist\@empty -\def\@EN@testlabel#1#2{% Don't change \@testdef -- `lblchng1.sty'. -% Cf. our \newlabel for details. \@EN@testlabel is an extension -% of it. -% \typeout{testinglist: \meaning\@EN@testinglist}% - \@EN@fornotelabel-{#1}{#2}{% - \expandafter - \ifx \@EN@tempa \relax % Label #1 not used in previous run. - \@tempswatrue % Just to behave like LaTeX's \@testdef. - \else % Only otherwise delicate procedure is required. -% Put to testing list: - \protected@edef \@EN@testinglist{\@EN@testinglist - \expandafter \protect \@EN@tempa{\@EN@tempa}}% -% First contribution to ...: - \@EN@addtolabeldef\@gobble{{\@EN@bleml}{\@EN@blemp}}% - \fi -% \typeout{\expandafter\string\@EN@tempa \space -% (-) \expandafter\meaning\@EN@tempa}% - }{\@EN@fornotelabel+{#1}{#2}{% - \@EN@test@addtolabeldef\@EN@ready{% - {\@EN@bleml}{\@EN@blemp}}% -% \typeout{\expandafter\string\@EN@tempa \space -% (+) \expandafter\meaning\@EN@tempa}% - }{\@EN@fornotelabel{}{#1}{#2}{% - \@EN@test@addtolabeldef{{\@EN@blemp}}\@EN@ready -% \typeout{\expandafter\string\@EN@tempa \space -% (p) \expandafter\meaning\@EN@tempa}% - }{\@EN@newlabel{#1}{#2}}% - }% + - }% - -} -% -\def\@EN@prepare@fromtl#1\@nil{% - \def\@tempa##1\protect#1##2##3\@nil{% - \def\@tempa{##2}\def\@EN@testinglist{##1##3}}} -\def\@EN@takepagesto#1#2#3#4#5#6{\def#6{#1, #3, #5}} -\AtEndDocument{\let\newlabel\@EN@testlabel - \let\getpagewiselinenumber\relax} %% TODO without!? -% -% v1.23: \warningpagebreak: -\AtEndDocument{\@EN@pagebreaks@finalwarn} -\let\@EN@pagebreaks@finalwarn\relax -\def\@EN@pagebreaksfinalwarn{% - \typeout{^^J% - Package ednotes: There have been \string\warningpagebreak\space - occurrences.^^JFor your final version, we recommend checking - whether they still are^^Jappropriate.^^J}% -} -\def\warningpagebreak{% - \@EN@warning{Page break (\string\warningpagebreak) - from user^^J-- still appropriate in final version!? --}% - \global\let\@EN@pagebreaks@finalwarn\@EN@pagebreaksfinalwarn - \pagebreak} -%% TODO: \afterassignment possible anywhere? -%% TODO: remove testing \typeout's. - -%% Reminder about `mfparxsp.sty': -\AtBeginDocument{% - \@ifpackageloaded{mfparxsp}{% - \PackageWarningNoLine{ednotes}{% -%% TODO: \PackageError? - You have loaded `mfparxsp.sty',\MessageBreak - which defines \string\MFparaxbuffer.\MessageBreak - We recommend, instead, \string\ExtraParaSkip\space - \MessageBreak - from `manyfoot.sty' version 1.7\MessageBreak - (CTAN:macros/latex/ncctools).\MessageBreak - Cf. ednotes package documentation% - }% - }\relax -} - -\endinput - -%% TODO: \newcommand whenever possible!? -%% TODO: with v1.1: warn about \label{[-+]EN@l...}. Maybe make -%% \label and \linelabel internal, new user versions check -%% the argument. -%% TODO: warn about \usepackage{foo} where foo is loaded by option!? -%% TODO: .dtx -%% TODO: license for *bundle* -%% TODO: ... or cf. the brief and clear conditions in Eurofont -%% (Rowland McDonnell) -%% TODO: Bigfoot/e-TeX (Kastrup) -%% TODO: compatibility with Parallel.sty -- Sergei Mariev 2003/06/19. -%% (hopeless, I'm afraid) -- 2005/02/19: Cf. Peter Wilson's -%% ledpar. - -%% VERSION HISTORY: -v0.36 2003/01/13 First version sent around. -v0.37 2003/01/22 Added version history and reference to - `mfparptc.sty'. -v0.38 2003/01/27 Improved copyright notice. -v0.39 2003/02/06 Documentation: output + splitting problem, - explanations of recommended packages. -v0.4 2003/03/03 Splitting problem remedied by linenox0. -v0.41 2003/03/03 our owns -> ourselves. + !? -v0.42 2003/03/04 Some remarks/TODOs, especially concerning \SplitNote, - changed lppl hint. -v0.43 2003/03/23 Doc.: "may" -> "must" [not be hidden]. -v0.44 2003/03/24 Took e-mail addresses list from edtab; - added comparison with LEDMAC. - TODOs for reading `MFPartPtc.sty'; - \Require...{linenox0}[2003/03/23]; - changed acknowledgements: still remains? - Stephan's approach, encouragement, U.L.; - minor changes in `overview'; point to - EDMAC homepage; TODO: ruled user's choice? - ---Sent to Peter and Dominik. -v0.45 2003/03/28 LEDMAC hint: replaced `Correct me ...' by - "single printable file" + "enhanced"; - Version History: 04 -> 03 at v0.44; - MFParPtc ToDo below: !! -> !? - ---Sent to Peter. -v0.46 2003/04/15 \renewcommand -> \newcommand in \Anotefmt - customization---thanks to Robert Alessi! - added bug report acknowledgement. -v0.47 2003/05/01 Added \@ in \textsymmdots. -v0.48 2003/06/22 Replaced \@secondoftwo by \@EN@second (Hyperref); - placed \let\@EN@lastline correctly---both - thanks to Sergei Mariev! - 2003/07/09 Added note on `hyperref.sty'. -v0.49 2003/09/03 Added documentation to evade the \donote bug. - 2003/11/06 Require corrected `linenox0.sty'. - 2003/11/13 Require corrected `lineno.sty'. -v0.5b 2003/12/30 Added \@EN@first and \@EN@gtempa for \repeatref. - 2003/12/31 Removed argument redundancy in \addlemmaexpands. -v0.5 2004/01/04 Added \@EN@CWhook for counting words package. -v0.51 2004/01/06 Require corrected `linenox0.sty'. -v0.6 2004/03/01 Removed two lines from preamble and mention of - \donote bug (v0.49), fixed the latter. -v0.61 2004/04/15 Changed `Comparison with LEDMAC' concerning TABMAC - and implementation, reformulated `acknowledgements'. - Unified quotation marks with `....sty'. - 2004/04/22 Removed `wait vor Alex...' and `CTAN soon' - concerning LEDMAC. - 2004/04/28 Removed `New with v0.4'. - 2004/05/12 Removed `few weeks' before `similar' in doc., - changed doc. concerning effects of different - implementations. Mentioned indexing, `Edstanza', - "minipage", and sidenotes concerning LEDMAC. - Included Florian Kragl in acknowledgements. - Added `A problem' (notes height estimation). - Sent around. Added Christian to copyright, - L"uck -> L\"uck. `edtab02' -> `edtable'. - 2004/07/20 Suggested \csname #2leftmark etc. - 2004/07/22 Used \DeclareOption*, removed `BETA TEST RELEASE'. -v0.62 2004/08/16 \RequirePackage{linenox0}[2004/08/12], LPPL v1.3; - \@EN@shortlemmatag, \@EN@initlemmatag, - \@EN@finmathlemmatag. -v0.63 2004/08/16 Replaced previous by \@EN@simplelemmatag and - \@EN@mathlemmatag. -v0.64 2004/08/19 Removed stars from ...newcommands of macros - that have no parameter, added some with - parameters (undid this?), however made - \lemmafmt and \notefmt long (star). - 2004/08/22 Changed `Packages required'. - 2004/08/31 Rearranged preamble concerning maintenance. -v0.7 2004/09/19 \Req...{linenox0}... etc. only with lineno v<4. - 2004/09/20 Adjustment of instructions to bundle changes; - `I.' after `Alexander'. -v0.71 2004/09/21 Took explanation for \ExtraP... from `mfparxsp.sty' - and removed mention of the latter; - removed a comment mark from a documentation line. - Changed lineno.sty/tex into ...pdf. -v1.0 2004/10/07 Changed documentation for additional options for - `edtable', `edmacpara', `countoccurrences'; hint at - TUGboat article; removed mention of `linenox0.sty'. - 2004/10/08 Replaced \newif\if@EN@Apara@; replaced redundant - option passes redundancy warnings; options - `edmacpara' and `countoccurences'; removed TODOs - concerning `mfparptc.sty'. - 2004/10/11 `perpage' option; acknowledgements for co-operation. - 2004/10/13 Require debugged `mfparptc.sty' and `edcntwd0.sty' - as well as `lineno.sty' equipped with new options. - 2004/10/18 Reminder on `mfparxsp.sty', changed TODOs. -v1.0a 2004/11/07 LPPL v1.3a. -v1.0b 2005/01/10 Contact via http. - 2005/01/19 Mentioned `ellipsis' package. -v1.01 2005/02/05 \Packagewarning -> \PackageWarning. -v1.1b 2005/02/20 Documentation: `ledpar', `ednotugb.pdf', - implementation. Only one cs per note -> much - different! Require new `edcntwd0,sty'. - With v1.1b, testing (`lblchng1.sty') is - disabled. -v1.1c 2005/02/20 Deleted \tracingmacros, earlier kept erroneously. -v1.1d 2005/02/21 Final testing of label changes. Moved v1.1 macros - towards end. - 2005/03/06 Reimplemented compression (v1.1b) and final - testing (v1.1d) very much + minor changes. -v1.1 2005/03/08 Notes on \repeatref, \pageandline, and new - `edcntwd0.sty' version. Top: `editory notes' -> - `critical editions'. Acknowledgement to Roy - Flechner. -v1.11 2005/04/07 Doc typo with ...plref. - 2005/04/09 \Provides...: `editory notes' -> `critical - editions'. Sent to Ednotes.news . -v1.12 2005/04/09 \@empty with Footnotetext... -v1.12a /04/09 Acknowl. Hillel Chayim Yisraeli. - 2005/04/10 Supplied LPPL URL, corrected \file... - Sent to CTAN and Ednotes.news . -v1.12b /04/11 address -> URL . - 2005/05/01 Due to removing \@EN@first, older version of - edcntwd0.sty suffices. - 2005/05/12 Remark on hyperref changed due to - lineno.sty v4.3 . -[not sent, not tested] -v1.12c /09/21 Doubled some hash marks in explanation of - customization, adapted doc. to \@EN@sphack. -[not sent] - -v1.2b 2005/09/22 Updated doc. wrt. availability of manyfoot.sty; - \PrecedeLevelWith . - 2005/09/24 \let\notthislemma\@firstofone (was bug without). -v1.2 2005/10/01 \notthislemma -> \notinnote; explained \Precede... - Sent to CTAN. -v1.2a 2005/10/02 supplied mention of HCY for v1.12. [not sent] -v1.21 2005/10/12 \@EN@process tests #3 on empty without \@EN@tempa; - withdummy -> gobble@pause, - killresume -> gobble@resume; - \@EN@robust@process. -v1.22b /11/21 \if@EN@in@note; \@EN@firstnext. - 2005/11/28 @EN@in@note -> LemmaTag; \@EN@gobble[two] - 2006/01/12 \allowhyphens in \@EN@putdown. - 2006/01/13 New \<<...>...\>. [to Lekhtman] - 2006/01/15 \long with \@EN@lemma@ellipsis; - removed general definition of \< . -v1.22 2006/01/16 \@EN@robust@process now really gobbles note, - removed wrong \@empty from \@EN@gobble@diamond; - \RobustTestOpt, \NewEdnotesCommand. -v1.23 2006/01/23 Example on \NewEdnotesCommand: default "B" -> "A". - 2006/06/07 Changed page-line algorithm with \differentlines; - edcntwd0.sty v0.32 required; - \c@EN@label LaTeX counter; - \expandafter\expandafter\expandafter -> \@EN@xpxpxp - 2006/06/15 \@EN@warning; edcntwd0.sty v0.32a required. - 2006/06/16 Additional screen advice with oscillating page breaks - + explanation in manual (\warningpagebreak). -v1.23a /06/20 Corrected \RequirePackage{edcntwd0}-date. -v1.23b /06/22 Require manyfoot v1.9. - /06/26 LPPL v1.3c; require mfparptc v4.1; remarks on - hyphenation of first word in lemma tag. -v1.23c /06/27 Fix for \pause/\resume in lemma tag (Roy Flechner, - a few day later Christian Tapp as well). -v1.3 2006/06/27 affirmed \long's (were TODOs); simplified - \@EN@gobble@pause. - 2006/06/28 \@EN@robust@process refined; gobble \>\@nil etc.; - \@EN@sphack@aux. - 2006/06/29 \ifLemmaTag -> \IfLemmaTag (-> doc.); - lemma@ellipsis -> ltag@ellipsis; \IfTypesetting; - \@EN@notelabel@cmd, \@EN@pause@ltag, \@EN@pause@aux. - 2006/07/05 \SelectAnoteRule etc. supporting - manyfoot's \SelectFootnoteRule. - 2006/07/06 \includeonly just with \@addtoreset{@ckpt}. - [Sent to CTAN, Christian, Sergei] -v1.3a 2006/07/20 Blank screen line above/below final warning. - 2006/10/05 News about perpage. - diff --git a/Master/texmf-dist/tex/latex/ednotes/lblchng1.sty b/Master/texmf-dist/tex/latex/ednotes/lblchng1.sty deleted file mode 100644 index 379a7a56541..00000000000 --- a/Master/texmf-dist/tex/latex/ednotes/lblchng1.sty +++ /dev/null @@ -1,260 +0,0 @@ -%% LblChng1.sty--tell about the first changed LaTeX label. -\def\fileversion{0.32c} \def\filedate{2005/10/01} - -%% Copyright (C) 2005 Uwe L\"uck -%% Munich, http://contact-ednotes.sty.de.vu. -%% Current maintainer is Uwe L\"uck. - -%% This program can be redistributed and/or modified under the terms -%% of the LaTeX Project Public License distributed from CTAN -%% archives in directory macros/latex/base/lppl.txt; either -%% version 1.3a of the License, or any later version. -%% We did our best to help you, but there is NO WARRANTY. - -%% * SUMMARY: * -%% -% This package is intended to be a (primitive) tool for -% fixing oscillating page breaks -- a problem that especially -% sometimes occurs in typesetting critical editions. Thus it -% addresses especially users of LaTeX packages lineno, ednotes, -% and ledmac (maybe even manyfoot and numline). When it has been -% invoked and some label(s) get an entry in the .aux file -% differing, with respect to page number, to that of the -% previous run, the first such label is reported on screen (and -% in the .log), including the differing page numbers. This -% should help in finding the first unstable page -- which is -% vital. The file also contains rather detailed explanations and -% discussions. -% -%% * CRITICAL EDITIONS, PACKAGES: * -%% -% For informations about macro packages mentioned in the present -% text, or about critical edition typesetting in general, I -% refer you to the web page http://ednotes.sty.de.vu . -% -%% * THE PROBLEM TO BE SOLVED: * -%% -% Sometimes it happens that LaTeX's final warning "Label(s) may -% have changed. Rerun to get cross-references right." appears at -% *every* run, i.e., rerunning doesn't help. Or instead, it may -% be noticed that certain cross-references keep being wrong. -% The only reason I know of is that the runs oscillate between -% two decisions about what material should be put onto a certain -% page. And the only reason I know for this is that the space -% consumed by some cross-reference depends on the page breaking. -% I know this problem from critical edition typesetting. -% -%% * OUTLINE of the SOLUTION offered here: * -%% -% I simply propose that the user makes up her mind on the nasty -% page breaks and forces some at a certain lines, or contributes -% her opinion, through \pagebreak (or maybe even \nopagebreak, I -% have no idea whether this can be useful). -- A float (`figure' -% or `table') may contribute to the problem as well, so you may -% move its LaTeX code or change the placement options (through -% the brackets argument). -% -% Typically, one position of such oscillating causes further -% page breaking oscillations for many ensuing pages, yielding a -% bunch of wrong cross-references and countings. Of course, the -% user then should settle the first occurrence of oscillating -% before bothering with others -- all the rest of them may -% disappear when the first one is fixed. -% -% One problem with this solution ("?") is that it may be -% bothersome to find out where the first oscillation occurs -% indeed (by looking through the .dvi's or .pdf's). The present -% package tries to help with this. -% -% With Peter R. Wilson's ledmac, you have the "ballast" -% procedure for influencing page breaks. (It is due to John -% Lavagnino, Dominik Wujastyk, and Wayne Sullivan, inherited -% from EDMAC). It saves you from looking for good positions for -% \pagebreak's. I might offer something similar (with -% lineno.sty/ednotes.sty). However, I would like to object that -% the "ballast" procedure chooses between two page break -% possibilities rather "by chance" (reinforcing the first break -% idea encountered while the other idea might turn out to be -% better). But I must concede: One of the two breaks between the -% runs oscillate may turn out not to work, or even both of them -% -- when the cross-references have been adjusted to that -% decision. The "ballast" procedure may then save some time for -% you. On the other hand, if *both* decisions turn out not to -% work, I wonder whether the "ballast" method will certainly -% find a working one. -% -%% * USAGE: * -%% -% 1. \usepackage{lblchng1} in every LaTeX document that you -% create, or in every critical edition LaTeX document that you -% create, or only when you run into the problem of not settling -% label definitions. (Hope that you then remember that there is -% such a package!) -% -% 2a. You will be told about the page numbers where some \label -% (or, with Stephan I. B\"ottcher's lineno.sty or its extension -% ednotes.sty, some \linelabel) appears. Observe the page breaks -% in the .dvi's or .pdf's in the corresponding region. Note that -% the passage which causes the oscillation may be a number of -% pages earlier than the page number mentioned in the warning. -% (Sorry, this is the price of cheapness.) You can get rid of -% the warning without fixing the real problem -- fixing a late -% page break preceding the \label -- but this may cause badly -% filled pages earlier. So it will be wise to identify the very -% first passage causing oscillating page breaks. -- Another -% conjecturing hint: According to the diagnosis that I delivered -% above, the first oscillation happens near a cross-reference -% whose length varies due to the oscillation. So look for some -% \ref (or \lineref) referring forward(!). If you are lucky, the -% \ref refers to the label whose change has been warned about. -% -% 2b. If you are working with *ednotes.sty*: ednotes.sty v1.1 -% does something similar with internal informations about each -% note, and it delivers a similar message on screen and in .log. -% It reports on three page numbers. However, the first -% oscillation happens (I think) at most one page before the -% reported ones. -% -% 3a. As indicated above, try to force a certain page break at -% this passage through \pagebreak (or \nopagebreak?) -- or -% change the position of a `figure' or `table' in code or in -% output (brackets argument), if it seems to contribute to the -% problem. Concerning \pagebreak (\nopagebreak), I personally -% also think of using the optional argument in the brackets, -% while I feel unable to judge the value of this. -- I also -% recommend that you use \typeout near the \pagebreak or so to -% remind yourself of the \pagebreak -- in case the \pagebreak -% after some changes suddenly produces a very bad page break -% and you don't examine the output with sufficient carefulness, -% being in a hurry, e.g. -% -% 3b. With *ledmac*, you may experiment with the "ballast" -% amount until that first oscillation stops. -% -%% * A minor WARNING: * (LaTeX version) -%% -% A remark as of 1995/07/13 in ltmiscen.dtx makes me wonder -% whether the present package works with older versions of -% LaTeX. -% -%% * CRITICAL EDITIONS: * (lineno.sty, ednotes.sty, ledmac) -%% -% 1. With Stephan I. B\"ottcher's lineno.sty and its extension -% ednotes.sty, oscillating page breaking also results in wrong -% pagewise numbering of lines and in wrongly placed-and-numbered -% footnotes. I am thinking of refining lineno.sty in addition to -% the present package. On the other hand, I conjecture that -% wrong pagewise numbering is *always* (at least sufficiently -% often) closely accompanied by oscillating cross-references, so -% the present package may offer sufficient help. -- Well, sorry, -% this may remain being true with respect to lineno.sty, but -% since March 2005, ednotes.sty treats its internal line number -% references in a way that makes them "invisible" to -% lblchng1.sty. This is very necessary for huge editions with, -% say, 10.000 notes or more, for a memory capacity reason. -% ednotes.sty uses an own procedure to detect page number -% changes, to which lblchng1.sty adds perhaps only little. -% -% 2. I guess that even ledmac users may find the present package -% useful, to find out where they have to watch when trying to -% adjust the "ballast" appropriately. However, its usefulness -% depends on how dense LaTeX \label's appear in the edited text. -% Indeed, it is the pages with the numerous critical footnotes -% fall where oscillations are likely to occur. \label's may be -% here when the comments refer to certain sections etc. of the -% edited text, OK, but will they? The line number references -% preceding the single notes (just on these "critical" -- in -% two senses -- pages) might be much more helpful, yet they are, -% with ledmac.sty, not implemented by \label. And it is wise not -% to implement them by \label, similarly as with ednotes.sty -% above. (ednotes.sty still uses \label, to be sure, but it -% redefines \newlabel in a way that is specific to ednotes.sty's -% way of storing data about the notes.) -% -%% * WONDERING REMARK: * -%% -% Oscillating label definitions do not necessarily result in -% anything wrong. The page number in the label definition may -% oscillate while not being used by any \pageref. -- I have no -% idea at present what this tells us to do if it happens so ... -% -%% * ACKNOWLEDGEMENTs: * -%% -% This package is due to Roy Flechner's confidence in our -% ednotes.sty and to frightening observations he reported to -% us. Thanks also to Peter Wilson for moral support. - -%% Please send comments via http://contact-ednotes.sty.de.vu. - -%% * IMPLEMENTATION: * %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -\NeedsTeXFormat{LaTeX2e}[1994/10/30] -%% <- \@onelevel@sanitize; also \CheckCommand \reserved@a. -\ProvidesPackage{lblchng1}[\filedate\space\fileversion\space - ^^Jexhibiting first changed label] - -%% * Main idea: * -% Testing on label changes is done by \@testdef -- at least I -% assume this here (and I will somewhat check it). I refine it -% so it shows the label name and the page numbers -- clearly, -% what could I do else? (Well, I could redefine \label so ...) -% -%% If LaTeX's \@testdef changes, the present package may better -%% be updated: -\CheckCommand*\@testdef[3]{% - \def\reserved@a{#3}\expandafter \ifx \csname #1@#2\endcsname - \reserved@a \else \@tempswatrue \fi} -\def\@testdef#1#2#3{%% This is what I expect LaTeX to use. - \@ifundefined{#1@#2}\@tempswatrue{%% Like LaTeX: - \def\@tempa{#3}% - \expandafter - \ifx \csname #1@#2\endcsname \@tempa - \else \@tempswatrue -%% v0.3: moved disabling \@newl@bel from here to below. - \fi %% But now: -%% To be sure, I additionally assume that the page number is the -%% second thing, and more. I have had bad experience with -%% hyperref and thus do not assume that there are just two -%% things in the last argument of \newlabel. - \def\@tempb##1##2##3\@nil##4{% - \def##4{##2}\@onelevel@sanitize##4}% -%% Well, why not use some initially defined \@LC@extractpno -%% instead of this \@tempb? %% TODO -%% -- With modern large and fast TeX versions, one should not -%% waste a second with such considerations. -- However: -%% different effects concerning compatibility. - \expandafter \@tempb \@tempa \@nil\@tempa - \expandafter\expandafter\expandafter - \@tempb \csname#1@#2\endcsname \@nil\@tempb - \ifx\@tempa\@tempb \else - \typeout{^^JPackage `lblchng1':^^J% - *** Page number of label `#2' is changing: ***^^J% - \space\space\space\space - was \@tempb, will be \@tempa.^^JWatch whether - this stops and references get right.}% -%% Further testing wouldn't change anything: - \def\@newl@bel{\@gobblefour\relax}\fi}} -%% Warning: this could create an incompatibility with some other -%% package or with some LaTeX version. -%% Again: this extra line doesn't pay well nowadays. - -\endinput - -VERSION HISTORY: - -v0.1 2005/02/15 First release for Roy Flechner. -v0.2b 2005/02/16 Attempt at \getpagewiselinenumbers -- in - vain. Improved explanations. -v0.2 2005/02/17 Changed implementation back; but keep - completely disabling \newlabel after the - report. Only page numbers are reported. - (CTAN and ednotes.news received slightly - different explanations than Roy Flechner.) -v0.3 2005/02/17 \@newl@ble turned off with page no. change - only. Doc. warns on compatibility. -v0.31 2005/02/27 Additional line on screen. -v0.32 2005/03/08 Adapted explanations to ednotes.sty v1.1; - warned about usefulness with critical - editions. Changed some headings. - Acknowledgements. -v0.32a 2005/03/21 Minor corrections. -v0.32c 2005/10/01 Another typo fix. diff --git a/Master/texmf-dist/tex/latex/ednotes/mfparptc.sty b/Master/texmf-dist/tex/latex/ednotes/mfparptc.sty deleted file mode 100644 index e2008f199d2..00000000000 --- a/Master/texmf-dist/tex/latex/ednotes/mfparptc.sty +++ /dev/null @@ -1,208 +0,0 @@ -%% MFParPtc.sty---Uwe L"uck http://www.contact-ednotes.sty.de.vu. -%% Modifies Alexander Rozhenko's manyfoot.sty. -%% -%% Copyright (C) 2003--2006 by Uwe L"uck--author-maintained. -%% -%% This file can be redistributed and/or modified under -%% the terms of the LaTeX Project Public License; either -%% version 1.3c of the License, or any later version. -%% The latest version of this license is in -%% http://www.latex-project.org/lppl.txt -%% We did our best to help you, but there is NO WARRANTY. -%% -% -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{mfparptc}[2006/06/26 v0.41 %% TODO - ^^J\string"patch\string" for manyfoot.sty's paragraph footnotes - (ul)] -% -% The paragraphed-footnote style of Alexander Rozhenko's manyfoot.sty -% derives, like the same style of Dominik Wujastyk's and John -% Lavagnino's EDMAC.doc, from Donald Knuth's proposal on pp. -% 398--400 of the TeXbook. However, the two packages improve this -% proposal in different respects. EDMAC (i) adds to the TeXbook -% macros penalties solving a page breaking problem and (ii) accounts -% for some problems of line breaking and hyphenation in the -% footnotes (see EDMAC.doc, Section -% `Footnotes'--`Paragraphed footnotes'). manyfoot.sty does not deal -% with these things. -% -% The present version of the "patch" rearms the latter with EDMAC's -% remedies (maybe at the cost of \linebreak and \\, see below). -%% TODO -% We aim at manyfoot.sty v1.4 from 1998/12/19. -% -% Alex and me could not convince ourselves entirely of these -% "patches". They are *experimental*. When we have made up our minds, -% they may become part of other packages. -% -% Indeed, the present "patches" disable the \SplitNote macro -% from manyfoot.sty. So you have to choose between \SplitNote -% (not loading present package) and the EDMAC enhancements -% (loading the present package). -% -% --If you want to use this package for working with ednotes.sty, -% load the latter with option `edmacpara'--this loads the -% present file at a suitable time. This is useful only unless -% only `plain' options of `ednotes.sty' are called. -% --If you don't work with ednotes.sty and want to use the present -% file only for modifying manyfoot functionality, load the present -% file after manyfoot.sty has been loaded. This is useful only if -% some footnote layer has been declared with option `para' or -% `para*'. -% -% Implementation: -% -%% Note: \Requirepackage[...]{manyfoot} would cause option clash. -% -% \MFL@fnotepara expected: -% (Also tests whether manyfoot.sty has been loaded with option -% `para' or `para*'.) -\CheckCommand*\MFL@fnotepara[3]{\let\@thefnmark\@empty - \NCC@makefnmark{#2}% - \MFL@insert#1{\reset@font\footnotesize - \ifx\@thefnmark\@empty \@tempswafalse \else - \@tempswatrue - \protected@edef\@currentlabel{\@thefnmark}% - \fi - \color@begingroup - \if@tempswa - \setbox\@tempboxa\hbox{\@makefnmark}% - \ifMFL@paraindent - \@tempdima.8em \advance\@tempdima-\wd\@tempboxa - \ifdim \@tempdima<\z@ \@tempdima\z@ \fi - \else - \@tempdima\z@ - \fi - \fi - \setbox\@tempboxa\hbox{% - \if@tempswa - \hskip\@tempdima\unhbox\@tempboxa\nobreak - \fi - \ignorespaces#3\unskip\strut - \ifMFL@split \penalty\m@ne\space \else - \penalty-10 \hskip\footglue - \fi - }% - \dp\@tempboxa\z@ \ht\@tempboxa\MFL@fudgefactor\wd\@tempboxa - \box\@tempboxa - \color@endgroup - }% -} -% For splitting footnote paragraphs EDMAC inserts a (low) \penalty -% after \box\@tempboxa at Wayne Sullivan's suggestion, see -% EDMAC.doc after \def\para@vfootnote. -% Another patch is needed to get \language whatsit nodes and -% \discretionary's---cf. EDMAC.doc's description of \para@vfootnote. -% This is due to Michael Downes, Wayne Sullivan, and Donald Knuth. -% The insert text is first typeset in an "infinitely" wide \vbox. -% Some problems remain as in EDMAC. No \break should occur in the -% insert text. We locally redefine \@M and \hfil hoping to repair -% \\ and \linebreak (even \break!) (experimental---please report!) %% TODO -% (EDMAC.doc refers to Michael Downes, `Line breaking in \unhboxed -% Text', TUGboat 11 (1990), pp. 605--612.) -% TODO: Might redefine \hfill and more; cf. Michael Downes' paper. -\def\MFL@fnotepara#1#2#3{\let\@thefnmark\@empty - \NCC@makefnmark{#2}% - \MFL@insert#1{\reset@font\footnotesize - \ifx\@thefnmark\@empty \@tempswafalse \else - \@tempswatrue - \protected@edef\@currentlabel{\@thefnmark}% - \fi - \color@begingroup - \if@tempswa - \setbox\@tempboxa\hbox{\@makefnmark}% - \ifMFL@paraindent - \@tempdima.8em \advance\@tempdima-\wd\@tempboxa - \ifdim \@tempdima<\z@ \@tempdima\z@ \fi - \else - \@tempdima\z@ - \fi - \fi - \setbox\@tempboxa\vbox{% <- PATCH! - \@parboxrestore % <- PATCH - \hsize\maxdimen \noindent % <- PATCH! -% \setbox\@tempboxa\hbox{% - \if@tempswa - \hskip\@tempdima\unhbox\@tempboxa\nobreak - \fi - \mathchardef\@M9999 % <- PATCH! - \def\hfil{\hskip\linewidth\@minus\linewidth}% <- PATCH! - \ignorespaces#3\unskip\strut -% \ifMFL@split \penalty\m@ne\space \else % PATCH: removed. -% \penalty-10 \hskip\footglue % PATCH: reinserted below. -% \fi - }% - \setbox\@tempboxa\hbox{% <- PATCH! -% Here is a suitable variant of EDMAC.doc's \unvxh, due to Michael -% Downes: - \setbox\z@\vbox{% - \unvbox\@tempboxa \global\setbox\@ne\lastbox}% - \unhbox\@ne \unskip \unskip \unpenalty - \ifMFL@split % Moved here from above. - \penalty\m@ne\space - \else - \penalty-10 \hskip\footglue - \fi - }% - \dp\@tempboxa\z@ \ht\@tempboxa\MFL@fudgefactor\wd\@tempboxa - \box\@tempboxa - \penalty\z@ % <- PATCH! - \color@endgroup - }% -} -% Like in EDMAC.doc, the additional penalty is removed by -% \MFL@makehhbox which corresponds to \makehboxofhboxes. -% \MFL@makehhbox differs from \makehboxofhboxes, however, in even -% \unvbox'ing a note bundle from a minipage. It seems not to be easy -% to tell a \penalty 0 placed by patched \MFL@fnotepara from another. -% In this version we just hope that removing such other penalties -% causes no damage---after all, the bundle was not supposed to be -% splitted. -\def\MFL@makehhbox{% - \loop - \unpenalty % <- PATCH! - \setbox\z@\lastbox - \ifhbox\z@ - \setbox\@tempboxa\hbox{\box\z@\unhbox\@tempboxa}% - \repeat - \ifvbox\z@ \unvbox\z@ \MFL@makehhbox \fi -} -\endinput - -VERSION HISTORY: - -v0.1 2003/01/19 First. Sent to John Lavagnino + ... -v0.2 2003/01/23 Corrected \Provides... file name; - supplied \vbox in \unvxh (bug fix!). -v0.21 2003/02/27 Stressed problem with \linebreak and \\ in doc. -v0.23 2003/02/28 Further comment on \CheckCommand, - improved explanation mentioning \para@vfootnote. -v0.3 2003/03/01 Changed \@M and \hfil to enable \\ and \linebreak - in para-style. -v0.31 2003/03/24 Reminded above that v0.2 was a real bug fix; - added ednotes.sty@web.de. -v0.32 2003/03/26 Added TODO on Alex' provision. [!?? 2004/04/25] -v0.33 2003/03/28 Added `experimental'; `missing' -> `bad' (hyph.) - 2004/01/29 Corrected, in the explanation for users, allusion - to problems to be solved (line breaking, not only - hyphenation) and added mention of \SplitNote - problem. -v0.34 2004/04/25 Added copyright etc.; added missing `%' before - `manyfoot.sty does not deal [...]'. Made - `(loading ...)' more clear. - `patch...' -> `"patch..."'. -v0.35 2004/05/10 Note on \RequirePackage[...]{manyfoot}; enlarged - on loading (Ednotes.sty); manyfoot -> Manyfoot. - 2004/05/20 Enhanced comment on \CheckCommand. - 2004/07/26 \string" with \Provides..., ^^J. -v0.36 2004/08/21 Added \@parboxrestore--as a bug fix for `center' - environment. - 2004/08/23 LPPL v1.3. - 2004/08/31 Rearranged preamble concerning maintenance. -v0.4 2004/10/07 Ednotes -> ednotes etc.; instructions: - ednotes option `edmacpara'. -v0.4a 2004/11/07 LPPL v1.3a. -v0.4b 2005/01/10 Contact via http. -v0.41 2006/06/26 \MFL@makemark -> \MFL@makefnmark for nccfoots v1.2; - LPPL v1.3c. diff --git a/Master/texmf-dist/tex/latex/ednotes/mfparxsp.sty b/Master/texmf-dist/tex/latex/ednotes/mfparxsp.sty deleted file mode 100644 index 9d2ea053a77..00000000000 --- a/Master/texmf-dist/tex/latex/ednotes/mfparxsp.sty +++ /dev/null @@ -1,63 +0,0 @@ -%% MFParXSp.sty---Uwe L"uck http://www.contact-ednotes.sty.de.vu. -%% -%% mfparxsp.sty earlier defined \MFparaxbuffer. -%% manyfoot version 1.7 (September 2004) defines -%% \ExtraParaSkip instead, so former mfpaxsp.sty is -%% ***obsolete***. You may use the present file to -%% convert \MFparaxbuffer of your earlier document files -%% into \ExtraParaSkip, or just to remind you of the change -%% later. (On CTAN, the new manyfoot version is obtainable -%% from directory /macros/latex/contrib/ncctools/.) -%% See explanation of \ExtraParaSkip in ednotes.sty -%% (CTAN: /macros/latex/contrib/ednotes). -%% -%% Copyright (C) 2004 by Uwe L"uck--author-maintained. -%% -%% This program can be redistributed and/or modified under the -%% terms of the LaTeX Project Public License distributed from -%% CTAN archives in directory macros/latex/base/lppl.txt; either -%% version 1.3 of the License, or any later version. -%% We did our best to help you, but there is NO WARRANTY. -%% -% -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{mfparxsp}[2005/01/10 v0.3b %% TODO - \string\MFparaxbuffer\space (ul)] -% -\PackageWarningNoLine{mfparxsp}{% -%% Line number would be that of here. -This package is obsolete.\MessageBreak -Replace \string\MFparaxbuffer\space -by \string\ExtraParaSkip\MessageBreak -use manyfoot.sty version 1.7\MessageBreak -and don't load mfparxsp.sty any more.\MessageBreak -See ednotes.sty documentation%% Silly: full stop from LaTeX. -} - -\let\MFparaxbuffer\ExtraParaSkip - -\endinput - -VERSION HISTORY: - -v0.1 2004/04/26 First. Sent to Florian Kragl and Christian. -v0.2 2004/04/27 Previous version was wrong. Used \MFL@startpara - as a hook now. Sent to Florian Kragl, Alex Rozhenko - and Christian. -v0.21 2004/05/10 Removed explanations on loading from Mfparptc.sty. - 2004/07/26 ^^J - 2004/08/31 `author-maintained'. -v0.3 2004/09/21 "Compatibility mode" for Manyfoot.sty version 1.7; - removed earlier code and documentation; changed - .log display. - 2004/10/08 Changed explanation to users at top. -v0.3a 2004/11/07 LPPL v1.3a. -v0.3b 2005/01/10 Contact via http. - -*Florian Kragl's earlier suggestion:* -In preamble, type - \setlength{\footnotesep}{<fns>} - \renewcommand*\footnoterule{\kern-<ra>\hrule\kern-<rb>} -Here, find good values for <fns>, <ra>, and <rb> by trial and error. - -%% End of file `MFParXSp.sty'. |