diff options
Diffstat (limited to 'Master/texmf-dist/tex/latex/ucthesis/uct12.clo')
| -rw-r--r-- | Master/texmf-dist/tex/latex/ucthesis/uct12.clo | 439 |
1 files changed, 439 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/latex/ucthesis/uct12.clo b/Master/texmf-dist/tex/latex/ucthesis/uct12.clo new file mode 100644 index 00000000000..abe9673fc27 --- /dev/null +++ b/Master/texmf-dist/tex/latex/ucthesis/uct12.clo @@ -0,0 +1,439 @@ +%% uct12.clo 11/3/94 +%% Copyright (C) 1988-2004 Daniel Gildea, BBF, Ethan Munson. +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3 +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of LaTeX +% version 2003/12/01 or later. +% +% This work has the LPPL maintenance status "maintained". +% +% The Current Maintainer of this work is Daniel Gildea. + +% **************************************** +% * FONTS * +% **************************************** +% + +\lineskip 1pt % \lineskip is 1pt for all font sizes. +\normallineskip 1pt +\def\baselinestretch{1.37} + +% All of the font selection commands have been revised to conform with the +% LaTeX2e font selection commands (BBF 10/31/94). +% +% Each size-changing command \SIZE executes the command +% \fontsize\@FONTSIZE{BASELINESKIP}\selectfont +% where: +% \@FONTSIZE = Name of font-size command. The currently available +% (preloaded) font sizes are: \@vpt (5pt), \@vipt (6pt), +% \@viipt (etc.), \@viiipt, \@ixpt, \@xpt, \@xipt, \@xiipt, +% \@xivpt, \@xviipt, \@xxpt, \@xxvpt. These are defined +% in ltfss.dtx. +% +% BASELINESKIP = Normal value of \baselineskip for that size. (Actual +% value will be \baselinestretch * BASELINESKIP.) +% +% For reasons of efficiency that needn't concern the designer, the +% document style defines \@normalsize instead of \normalsize . This +% is done only for \normalsize, not for any other size-changing +% commands. + +\renewcommand{\normalsize}{\fontsize\@xiipt{14.5}\selectfont% +\abovedisplayskip 12\p@ plus3\p@ minus7\p@ +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus3\p@ +\belowdisplayshortskip 6.5\p@ plus3.5\p@ minus3\p@ +\let\@listi\@listI} % Setting of \@listi added 9 Jun 87 + +\newcommand{\small}{\fontsize\@xipt{13.6}\selectfont% +\abovedisplayskip 11\p@ plus3\p@ minus6\p@ +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus3\p@ +\belowdisplayshortskip 6.5\p@ plus3.5\p@ minus3\p@ +\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87 +\parsep 4.5\p@ plus2\p@ minus\p@ + \itemsep \parsep + \topsep 9\p@ plus3\p@ minus5\p@}} + +\newcommand{\footnotesize}{\fontsize\@xpt{12}\selectfont% +\abovedisplayskip 10\p@ plus2\p@ minus5\p@ +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus3\p@ +\belowdisplayshortskip 6\p@ plus3\p@ minus3\p@ +\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87 +\topsep 6\p@ plus2\p@ minus2\p@\parsep 3\p@ plus2\p@ minus\p@ +\itemsep \parsep}} + +\newcommand{\scriptsize}{\fontsize\@viiipt{9.5pt}\selectfont} +\newcommand{\tiny}{\fontsize\@vipt{7pt}\selectfont} +\newcommand{\large}{\fontsize\@xivpt{18pt}\selectfont} +\newcommand{\Large}{\fontsize\@xviipt{22pt}\selectfont} +\newcommand{\LARGE}{\fontsize\@xxpt{25pt}\selectfont} +\newcommand{\huge}{\fontsize\@xxvpt{30pt}\selectfont} +\newcommand{\Huge}{\fontsize\@xxvpt{30pt}\selectfont} + +% The shortform font selection commands are not defined in LaTeX2e. This +% defines them so that they do non-orthogonal font selection, which is +% useful if you are in the middle of converting a document from 2.09. +% These commands are no longer used internally in this class. (BBF 10/31/94) + +\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm} +\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf} +\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt} +\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf} +\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit} +\newcommand{\sl}{\slshape} +\newcommand{\sc}{\scshape} + +\normalsize % Choose the normalsize font. + + +% **************************************** +% * PAGE LAYOUT * +% **************************************** +% +% All margin dimensions measured from a point one inch from top and side +% of page. + +%% UCTHESIS style is not intended to be used two-sided because the +%% University of California style requirements explicitly specify +%% single-sided printing. So the two-sided settings are meaningless. + +% SIDE MARGINS: +\if@twoside % Values for two-sided printing: + \oddsidemargin 0.5in % Left margin on odd-numbered pages. + \evensidemargin 0.0in % Left margin on even-numbered pages. + \marginparwidth 0pt % Width of marginal notes. +\else % Values for one-sided printing: + \oddsidemargin 0.5in % Note that \oddsidemargin = \evensidemargin + \evensidemargin 0.5in + \marginparwidth 0pt +\fi +\marginparsep 10pt % Horizontal space between outer margin and + % marginal note + + +% VERTICAL SPACING: + % Top of page: +\topmargin 0.0in % Nominal distance from top of page to top + % of box containing running head. +\headheight 12pt % Height of box containing running head. +\headsep 25pt % Space between running head and text. +\topskip = 12pt % '\baselineskip' for first line of page. + % Bottom of page: +\footskip 30pt % Distance from baseline of box containing + % foot to baseline of last line of text. + + +% DIMENSION OF TEXT: +% 24 Jun 86: changed to explicitly compute \textheight to avoid +% roundoff. The value of the multiplier was calculated as the floor +% of the old \textheight minus \topskip, divided by \baselineskip for +% \normalsize. The old value of \textheight was 536.5pt. \textheight +% is the height of text (including footnotes and figures, excluding +% running head and foot). + +\textheight = 30\baselineskip +\advance\textheight by \topskip +\textwidth 6.0truein % Width of text line. + % For two-column mode: +\columnsep 10pt % Space between columns +\columnseprule 0pt % Width of rule between columns. + +% A \raggedbottom command causes 'ragged bottom' pages: pages set to +% natural height instead of being stretched to exactly \textheight. + +% FOOTNOTES: + +\footnotesep 8.4pt % Height of strut placed at the beginning of every + % footnote = height of normal \footnotesize strut, + % so no extra space between footnotes. + +\skip\footins 10.8pt plus 4pt minus 2pt % Space between last line of + % text and top of first + % footnote. + +% FLOATS: (a float is something like a figure or table) +% +% FOR FLOATS ON A TEXT PAGE: +% +% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE: +\floatsep 14pt plus 2pt minus 4pt % Space between adjacent floats + % moved to top or bottom of + % text page. +\textfloatsep 20pt plus 2pt minus 4pt % Space between main text and + % floats at top or bottom of + % page. +\intextsep 14pt plus 4pt minus 4pt % Space between in-text figures + % and text. +% TWO-COLUMN FLOATS IN TWO-COLUMN MODE: +\dblfloatsep 14pt plus 2pt minus 4pt % Same as \floatsep for + % double-column figures in + % two-column mode. +\dbltextfloatsep 20pt plus 2pt minus 4pt % \textfloatsep for + % double-column floats. + +% FOR FLOATS ON A SEPARATE FLOAT PAGE OR COLUMN: +% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE: +\@fptop 0pt plus 1fil % Stretch at top of float page/column. (Must + % be 0pt plus ...) +\@fpsep 10pt plus 2fil % Space between floats on float page/column. +\@fpbot 0pt plus 1fil % Stretch at bottom of float page/column. + % (Must be 0pt plus ... ) + +% DOUBLE-COLUMN FLOATS IN TWO-COLUMN MODE. +\@dblfptop 0pt plus 1fil % Stretch at top of float page. (Must be + % 0pt plus ...) +\@dblfpsep 10pt plus 2fil% Space between floats on float page. +\@dblfpbot 0pt plus 1fil % Stretch at bottom of float page. (Must be + % 0pt plus ... ) +% MARGINAL NOTES: +% +\marginparpush 7pt % Minimum vertical separation between two + % marginal notes. + + +% **************************************** +% * PARAGRAPHING * +% **************************************** +% +\parskip 0pt plus 1pt % Extra vertical space between + % paragraphs. +\parindent 1.5em % Width of paragraph indentation. +%\topsep 10pt plus 4pt minus 6pt % Extra vertical space, in addition + % to \parskip, added above and below + % list and paragraphing environments. +\partopsep 3pt plus 2pt minus 2pt % Extra vertical space, in addition + % to \parskip and \topsep, added when + % list leaves blank line before + % environment. +%\itemsep 5pt plus 2.5pt minus 1pt % Extra vertical space, in addition + % to \parskip, added between list + % items. +% See \@listI for values of \topsep and \itemsep +% (Change made 9 Jun 87) + +% The following page-breaking penalties are defined + +\@lowpenalty 51 % Produced by \nopagebreak[1] or \nolinebreak[1] +\@medpenalty 151 % Produced by \nopagebreak[2] or \nolinebreak[2] +\@highpenalty 301 % Produced by \nopagebreak[3] or \nolinebreak[3] + +\@beginparpenalty -\@lowpenalty % Before a list or paragraph + % environment. +\@endparpenalty -\@lowpenalty % After a list or paragraph + % environment. +\@itempenalty -\@lowpenalty % Between list items. + +% \clubpenalty % 'Club line' at bottom of page. +% \widowpenalty % 'Widow line' at top of page. +% \displaywidowpenalty % Math display widow line. +% \predisplaypenalty % Breaking before a math display. +% \postdisplaypenalty % Breaking after a math display. +% \interlinepenalty % Breaking at a line within a paragraph. +% \brokenpenalty % Breaking after a hyphenated line. + + +% **************************************** +% * CHAPTERS AND SECTIONS * +% **************************************** +% +% Definition of \part moved to report.doc 19 Jan 88 + +% \@makechapterhead {TEXT} : Makes the heading for the \chapter +% command. +% + +\def\@makechapterhead#1{% % Heading for \chapter command + \vspace*{50\p@}% % Space at top of text page. + {\parindent \z@ \raggedright + \ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 THEN + \huge\bfseries \@chapapp{} \thechapter %Print '\chaptername' and number. + \par + \vskip 20\p@ \fi % Space between number and title. + \Huge \bfseries % Title. + #1\par + \nobreak % TeX penalty to prevent page break. + \vskip 40\p@ % Space between title and text. + }} + +% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* +% command. +% + +\def\@makeschapterhead#1{% % Heading for \chapter* command + \vspace*{50\p@}% % Space at top of page. + {\parindent \z@ \raggedright + \Huge \bfseries % Title. + #1\par + \nobreak % TeX penalty to prevent page break. + \vskip 40\p@ % Space between title and text. + }} + +% \secdef{UNSTARCMDS}{STARCMDS} : +% When defining a \chapter or \section command without using +% \@startsection, you can use \secdef as follows: +% \def\chapter { ... \secdef \CMDA \CMDB } +% \def\CMDA [#1]#2{ ... % Command to define +% % \chapter[...]{...} +% \def\CMDB #1{ ... % Command to define +% % \chapter*{...} + +\def\chapter{\clearpage % Starts new page. + \thispagestyle{plain}% % Page style of chapter page is 'plain' + \global\@topnum\z@ % Prevents figures from going at top of page. + \@afterindenttrue % Suppresses indent in first paragraph. + \secdef\@chapter\@schapter} % Change to \@afterindentfase for no indent. + +\def\@chapter[#1]#2{\ifnum \c@secnumdepth >\m@ne + \refstepcounter{chapter}% + \typeout{\@chapapp\space\thechapter.}% + \addcontentsline{toc}{chapter}{\protect + \numberline{\thechapter}#1}\else + \addcontentsline{toc}{chapter}{#1}\fi + \chaptermark{#1}% + \addtocontents{lof}% + {\protect\addvspace{10\p@}}% Adds between-chapter space + \addtocontents{lot}% + {\protect\addvspace{10\p@}}% to lists of figs & tables. + \if@twocolumn % Tests for two-column mode. + \@topnewpage[\@makechapterhead{#2}]% + \else \@makechapterhead{#2}% + \@afterheading % Routine called after chapter and + \fi} % section heading. + +\def\@schapter#1{\if@twocolumn \@topnewpage[\@makeschapterhead{#1}]% + \else \@makeschapterhead{#1}% + \@afterheading\fi} + +% \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE} +% optional * [ALTHEADING]{HEADING} +% Generic command to start a section. +% NAME : e.g., 'subsection' +% LEVEL : a number, denoting depth of section -- e.g., +% chapter=1, section = 2, etc. A section number will be +% printed if and only if LEVEL < or = the value of the +% secnumdepth counter. +% INDENT : Indentation of heading from left margin +% BEFORESKIP : Absolute value = skip to leave above the heading. +% If negative, then paragraph indent of text following +% heading is suppressed. +% AFTERSKIP : if positive, then skip to leave below heading, +% else - skip to leave to right of run-in heading. +% STYLE : commands to set style +% If '*' missing, then increments the counter. If it is present, then +% there should be no [ALTHEADING] argument. A sectioning command +% is normally defined to \@startsection + its first six arguments. + +\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus-1ex minus + -.2ex}{2.3ex plus.2ex}{\reset@font\Large\bfseries}} +\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus-1ex + minus-.2ex}{1.5ex plus.2ex}{\reset@font\large\bfseries}} +\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus + -1ex minus-.2ex}{1.5ex plus.2ex}{\reset@font\normalsize\bfseries}} +\def\paragraph{\@startsection + {paragraph}{4}{\z@}{3.25ex plus1ex minus.2ex}{-1em}{\reset@font + \normalsize\bfseries}} +\def\subparagraph{\@startsection + {subparagraph}{4}{\parindent}{3.25ex plus1ex minus + .2ex}{-1em}{\reset@font\normalsize\bfseries}} + +% Default initializations of \...mark commands. (See below for their +% us in defining page styles. +% + +\def\chaptermark#1{} +% \def\sectionmark#1{} % Preloaded definitions +% \def\subsectionmark#1{} +% \def\subsubsectionmark#1{} +% \def\paragraphmark#1{} +% \def\subparagraphmark#1{} + +% The value of the counter secnumdepth gives the depth of the +% highest-level sectioning command that is to produce section numbers. +% + +\setcounter{secnumdepth}{2} + +% APPENDIX +% +% The \appendix command must do the following: +% -- reset the chapter counter to zero +% -- set \@chapapp to Appendix (for messages) +% -- redefine the chapter counter to produce appendix numbers +% -- reset the section counter to zero +% -- redefine the \chapter command if appendix titles and headings +% are to look different from chapter titles and headings. + +\def\appendix{\par + \setcounter{chapter}{0}% + \setcounter{section}{0}% + \def\@chapapp{\appendixname}% + \def\thechapter{\Alph{chapter}}} + + +% **************************************** +% * LISTS * +% **************************************** +% + +% The following commands are used to set the default values for the list +% environment's parameters. See the LaTeX manual for an explanation of +% the meanings of the parameters. Defaults for the list environment are +% set as follows. First, \rightmargin, \listparindent and \itemindent +% are set to 0pt. Then, for a Kth level list, the command \@listK is +% called, where 'K' denotes 'i', 'ii', ... , 'vi'. (I.e., \@listiii is +% called for a third-level list.) By convention, \@listK should set +% \leftmargin to \leftmarginK. +% +% For efficiency, level-one list's values are defined at top level, and +% \@listi is defined to set only \leftmargin. + +\leftmargini 2.5em +\leftmarginii 2.2em % > \labelsep + width of '(m)' +\leftmarginiii 1.87em % > \labelsep + width of 'vii.' +\leftmarginiv 1.7em % > \labelsep + width of 'M.' +\leftmarginv 1em +\leftmarginvi 1em + +\leftmargin\leftmargini +\labelsep .5em +\labelwidth\leftmargini\advance\labelwidth-\labelsep +%\parsep 5pt plus 2.5pt minus 1pt %(Removed 9 Jun 87) + +% \@listI defines top level and \@listi values of +% \leftmargin, \topsep, \parsep, and \itemsep +% (Added 9 Jun 87) +\def\@listI{\leftmargin\leftmargini \parsep 5\p@ plus2.5\p@ minus\p@ +\topsep 10\p@ plus4\p@ minus6\p@ +\itemsep 5\p@ plus2.5\p@ minus\p@} + +\let\@listi\@listI +\@listi + +\def\@listii{\leftmargin\leftmarginii + \labelwidth\leftmarginii\advance\labelwidth-\labelsep + \topsep 5\p@ plus2.5\p@ minus\p@ + \parsep 2.5\p@ plus\p@ minus\p@ + \itemsep \parsep} + +\def\@listiii{\leftmargin\leftmarginiii + \labelwidth\leftmarginiii\advance\labelwidth-\labelsep + \topsep 2.5\p@ plus\p@ minus\p@ + \parsep \z@ \partopsep \p@ plus\z@ minus\p@ + \itemsep \topsep} + +\def\@listiv{\leftmargin\leftmarginiv + \labelwidth\leftmarginiv\advance\labelwidth-\labelsep} + +\def\@listv{\leftmargin\leftmarginv + \labelwidth\leftmarginv\advance\labelwidth-\labelsep} + +\def\@listvi{\leftmargin\leftmarginvi + \labelwidth\leftmarginvi\advance\labelwidth-\labelsep} + +\endinput |